diff options
Diffstat (limited to 'arch')
138 files changed, 1242 insertions, 1962 deletions
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 7049815d66d..68d6494c038 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -233,12 +233,13 @@ static void __init cacheid_init(void) unsigned int cachetype = read_cpuid_cachetype(); unsigned int arch = cpu_architecture(); - if (arch >= CPU_ARCH_ARMv7) { - cacheid = CACHEID_VIPT_NONALIASING; - if ((cachetype & (3 << 14)) == 1 << 14) - cacheid |= CACHEID_ASID_TAGGED; - } else if (arch >= CPU_ARCH_ARMv6) { - if (cachetype & (1 << 23)) + if (arch >= CPU_ARCH_ARMv6) { + if ((cachetype & (7 << 29)) == 4 << 29) { + /* ARMv7 register format */ + cacheid = CACHEID_VIPT_NONALIASING; + if ((cachetype & (3 << 14)) == 1 << 14) + cacheid |= CACHEID_ASID_TAGGED; + } else if (cachetype & (1 << 23)) cacheid = CACHEID_VIPT_ALIASING; else cacheid = CACHEID_VIPT_NONALIASING; diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 134af97ff34..b7f23324231 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -347,6 +347,111 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} #endif +/* -------------------------------------------------------------------- + * Compact Flash (PCMCIA or IDE) + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \ + defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) + +static struct at91_cf_data cf0_data; + +static struct resource cf0_resources[] = { + [0] = { + .start = AT91_CHIPSELECT_4, + .end = AT91_CHIPSELECT_4 + SZ_256M - 1, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT, + } +}; + +static struct platform_device cf0_device = { + .id = 0, + .dev = { + .platform_data = &cf0_data, + }, + .resource = cf0_resources, + .num_resources = ARRAY_SIZE(cf0_resources), +}; + +static struct at91_cf_data cf1_data; + +static struct resource cf1_resources[] = { + [0] = { + .start = AT91_CHIPSELECT_5, + .end = AT91_CHIPSELECT_5 + SZ_256M - 1, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT, + } +}; + +static struct platform_device cf1_device = { + .id = 1, + .dev = { + .platform_data = &cf1_data, + }, + .resource = cf1_resources, + .num_resources = ARRAY_SIZE(cf1_resources), +}; + +void __init at91_add_device_cf(struct at91_cf_data *data) +{ + unsigned long ebi0_csa; + struct platform_device *pdev; + + if (!data) + return; + + /* + * assign CS4 or CS5 to SMC with Compact Flash logic support, + * we assume SMC timings are configured by board code, + * except True IDE where timings are controlled by driver + */ + ebi0_csa = at91_sys_read(AT91_MATRIX_EBI0CSA); + switch (data->chipselect) { + case 4: + at91_set_A_periph(AT91_PIN_PD6, 0); /* EBI0_NCS4/CFCS0 */ + ebi0_csa |= AT91_MATRIX_EBI0_CS4A_SMC_CF1; + cf0_data = *data; + pdev = &cf0_device; + break; + case 5: + at91_set_A_periph(AT91_PIN_PD7, 0); /* EBI0_NCS5/CFCS1 */ + ebi0_csa |= AT91_MATRIX_EBI0_CS5A_SMC_CF2; + cf1_data = *data; + pdev = &cf1_device; + break; + default: + printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n", + data->chipselect); + return; + } + at91_sys_write(AT91_MATRIX_EBI0CSA, ebi0_csa); + + if (data->det_pin) { + at91_set_gpio_input(data->det_pin, 1); + at91_set_deglitch(data->det_pin, 1); + } + + if (data->irq_pin) { + at91_set_gpio_input(data->irq_pin, 1); + at91_set_deglitch(data->irq_pin, 1); + } + + if (data->vcc_pin) + /* initially off */ + at91_set_gpio_output(data->vcc_pin, 0); + + /* enable EBI controlled pins */ + at91_set_A_periph(AT91_PIN_PD5, 1); /* NWAIT */ + at91_set_A_periph(AT91_PIN_PD8, 0); /* CFCE1 */ + at91_set_A_periph(AT91_PIN_PD9, 0); /* CFCE2 */ + at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */ + + pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf"; + platform_device_register(pdev); +} +#else +void __init at91_add_device_cf(struct at91_cf_data *data) {} +#endif /* -------------------------------------------------------------------- * NAND / SmartMedia diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 0b3ae21b456..793fe7b25f3 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -56,6 +56,9 @@ struct at91_cf_data { u8 vcc_pin; /* power switching */ u8 rst_pin; /* card reset */ u8 chipselect; /* EBI Chip Select number */ + u8 flags; +#define AT91_CF_TRUE_IDE 0x01 +#define AT91_IDE_SWAP_A0_A2 0x02 }; extern void __init at91_add_device_cf(struct at91_cf_data *data); diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 9bb4f043aa2..7ac812dc055 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -332,7 +332,6 @@ static int at91_pm_enter(suspend_state_t state) at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR)); error: - sdram_selfrefresh_disable(); target_state = PM_SUSPEND_ON; at91_irq_resume(); at91_gpio_resume(); diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-evm.c index a957d239a68..38b6a9ce2a9 100644 --- a/arch/arm/mach-davinci/board-evm.c +++ b/arch/arm/mach-davinci/board-evm.c @@ -311,6 +311,9 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) gpio_request(gpio + 7, "nCF_SEL"); gpio_direction_output(gpio + 7, 1); + /* irlml6401 sustains over 3A, switches 5V in under 8 msec */ + setup_usb(500, 8); + return 0; } @@ -417,9 +420,6 @@ static __init void davinci_evm_init(void) platform_add_devices(davinci_evm_devices, ARRAY_SIZE(davinci_evm_devices)); evm_init_i2c(); - - /* irlml6401 sustains over 3A, switches 5V in under 8 msec */ - setup_usb(500, 8); } static __init void davinci_evm_irq_init(void) diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index 28f6dbc95bd..abb92b7eca0 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -231,6 +231,11 @@ static struct clk davinci_clks[] = { .lpsc = DAVINCI_LPSC_GPIO, }, { + .name = "usb", + .rate = &commonrate, + .lpsc = DAVINCI_LPSC_USB, + }, + { .name = "AEMIFCLK", .rate = &commonrate, .lpsc = DAVINCI_LPSC_AEMIF, diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c index 867ead2559a..69680784448 100644 --- a/arch/arm/mach-davinci/usb.c +++ b/arch/arm/mach-davinci/usb.c @@ -47,6 +47,7 @@ static struct musb_hdrc_platform_data usb_data = { #elif defined(CONFIG_USB_MUSB_HOST) .mode = MUSB_HOST, #endif + .clock = "usb", .config = &musb_config, }; diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index f6a13451d1f..6031e179926 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -81,7 +81,7 @@ static inline void __init ldp_init_smc911x(void) } ldp_smc911x_resources[0].start = cs_mem_base + 0x0; - ldp_smc911x_resources[0].end = cs_mem_base + 0xf; + ldp_smc911x_resources[0].end = cs_mem_base + 0xff; udelay(100); eth_gpio = LDP_SMC911X_GPIO; diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S index 8a7f65ba14b..94077fbd96b 100644 --- a/arch/arm/mm/abort-ev6.S +++ b/arch/arm/mm/abort-ev6.S @@ -23,7 +23,8 @@ ENTRY(v6_early_abort) #ifdef CONFIG_CPU_32v6K clrex #else - strex r0, r1, [sp] @ Clear the exclusive monitor + sub r1, sp, #4 @ Get unused stack location + strex r0, r1, [r1] @ Clear the exclusive monitor #endif mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c index 1f7cc0067f5..ebb305ce768 100644 --- a/arch/arm/plat-s3c64xx/irq-eint.c +++ b/arch/arm/plat-s3c64xx/irq-eint.c @@ -55,7 +55,7 @@ static void s3c_irq_eint_unmask(unsigned int irq) u32 mask; mask = __raw_readl(S3C64XX_EINT0MASK); - mask |= eint_irq_to_bit(irq); + mask &= ~eint_irq_to_bit(irq); __raw_writel(mask, S3C64XX_EINT0MASK); } diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 8f1f97d56e1..0c1f86e3e44 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -1129,6 +1129,7 @@ endchoice config PM_WAKEUP_BY_GPIO bool "Allow Wakeup from Standby by GPIO" + depends on PM && !BF54x config PM_WAKEUP_GPIO_NUMBER int "GPIO number" @@ -1168,6 +1169,12 @@ config PM_BFIN_WAKE_GP default n help Enable General-Purpose Wake-Up (Voltage Regulator Power-Up) + (all processors, except ADSP-BF549). This option sets + the general-purpose wake-up enable (GPWE) control bit to enable + wake-up upon detection of an active low signal on the /GPW (PH7) pin. + On ADSP-BF549 this option enables the the same functionality on the + /MRXON pin also PH7. + endmenu menu "CPU Frequency scaling" diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug index 5f981d9ca62..79e7e63ab70 100644 --- a/arch/blackfin/Kconfig.debug +++ b/arch/blackfin/Kconfig.debug @@ -21,12 +21,6 @@ config DEBUG_STACK_USAGE config HAVE_ARCH_KGDB def_bool y -config KGDB_TESTCASE - tristate "KGDB: for test case in expect" - default n - help - This is a kgdb test case for automated testing. - config DEBUG_VERBOSE bool "Verbose fault messages" default y diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig index 4fdb9e04759..281f4b60e60 100644 --- a/arch/blackfin/configs/BF518F-EZBRD_defconfig +++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Fri Jan 9 17:58:41 2009 +# Linux kernel version: 2.6.28 +# Fri Feb 20 10:01:44 2009 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -133,10 +133,15 @@ CONFIG_BF518=y # CONFIG_BF538 is not set # CONFIG_BF539 is not set # CONFIG_BF542 is not set +# CONFIG_BF542M is not set # CONFIG_BF544 is not set +# CONFIG_BF544M is not set # CONFIG_BF547 is not set +# CONFIG_BF547M is not set # CONFIG_BF548 is not set +# CONFIG_BF548M is not set # CONFIG_BF549 is not set +# CONFIG_BF549M is not set # CONFIG_BF561 is not set CONFIG_BF_REV_MIN=0 CONFIG_BF_REV_MAX=2 @@ -426,7 +431,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set -# CONFIG_NET_DSA is not set +CONFIG_NET_DSA=y +# CONFIG_NET_DSA_TAG_DSA is not set +# CONFIG_NET_DSA_TAG_EDSA is not set +# CONFIG_NET_DSA_TAG_TRAILER is not set +CONFIG_NET_DSA_TAG_STPID=y +# CONFIG_NET_DSA_MV88E6XXX is not set +# CONFIG_NET_DSA_MV88E6060 is not set +# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set +# CONFIG_NET_DSA_MV88E6131 is not set +# CONFIG_NET_DSA_MV88E6123_61_65 is not set +CONFIG_NET_DSA_KSZ8893M=y # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -529,6 +544,8 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # # Self-contained MTD device drivers # +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -561,7 +578,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -607,6 +626,7 @@ CONFIG_BFIN_RX_DESC_NUM=20 # CONFIG_SMC91X is not set # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -764,7 +784,23 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BFIN_LOCK is not set +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -788,8 +824,10 @@ CONFIG_BFIN_WDT=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -861,10 +899,18 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers @@ -1062,12 +1108,20 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set CONFIG_SYSCTL_SYSCALL_CHECK=y + +# +# Tracers +# +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_KGDB_TESTCASE is not set CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y # CONFIG_DEBUG_HWERR is not set @@ -1100,6 +1154,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index 833128b3972..a50050f1770 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -327,8 +327,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set # CONFIG_MPU is not set # diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index 334c94b51c4..0a2a00d6388 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -290,8 +290,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set # CONFIG_MPU is not set # diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index 9d733436e30..eb027587a35 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -290,8 +290,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set # CONFIG_MPU is not set # diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index 4fb4108d310..9e62b9f40eb 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -298,8 +298,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set # CONFIG_MPU is not set # @@ -568,15 +568,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_NAND=m -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -# CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -# CONFIG_MTD_NAND_BFIN is not set -CONFIG_MTD_NAND_IDS=m -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_NANDSIM is not set -CONFIG_MTD_NAND_PLATFORM=m +# CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set # diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig index cb32f5624a1..dd6ad6be1c8 100644 --- a/arch/blackfin/configs/BF538-EZKIT_defconfig +++ b/arch/blackfin/configs/BF538-EZKIT_defconfig @@ -306,8 +306,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set # CONFIG_MPU is not set # diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index 0f8697618aa..6bc2fb1b2a7 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -361,8 +361,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set # CONFIG_BFIN_L2_CACHEABLE is not set # CONFIG_MPU is not set @@ -680,7 +680,7 @@ CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y +# CONFIG_SCSI_PROC_FS is not set # # SCSI support type (disk, tape, CD-ROM) diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index 042c7adfccf..69714fb3e60 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -329,8 +329,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set # CONFIG_BFIN_L2_CACHEABLE is not set # CONFIG_MPU is not set diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig index 3a20e281d23..017c6ea071b 100644 --- a/arch/blackfin/configs/BlackStamp_defconfig +++ b/arch/blackfin/configs/BlackStamp_defconfig @@ -288,8 +288,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set # CONFIG_MPU is not set # diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig index 865ed85a576..d880ef78677 100644 --- a/arch/blackfin/configs/CM-BF527_defconfig +++ b/arch/blackfin/configs/CM-BF527_defconfig @@ -332,8 +332,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set # CONFIG_MPU is not set # diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig index efe9741b1f1..f410430b4e3 100644 --- a/arch/blackfin/configs/CM-BF548_defconfig +++ b/arch/blackfin/configs/CM-BF548_defconfig @@ -336,8 +336,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set CONFIG_L1_MAX_PIECE=16 # CONFIG_MPU is not set @@ -595,7 +595,7 @@ CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y +# CONFIG_SCSI_PROC_FS is not set # # SCSI support type (disk, tape, CD-ROM) diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig index eae83b5de92..7db93874c98 100644 --- a/arch/blackfin/configs/IP0X_defconfig +++ b/arch/blackfin/configs/IP0X_defconfig @@ -612,7 +612,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_SCSI=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y +# CONFIG_SCSI_PROC_FS is not set # # SCSI support type (disk, tape, CD-ROM) diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig index fa580affc9d..a46529c6ade 100644 --- a/arch/blackfin/configs/SRV1_defconfig +++ b/arch/blackfin/configs/SRV1_defconfig @@ -282,8 +282,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set CONFIG_L1_MAX_PIECE=16 # diff --git a/arch/blackfin/include/asm/Kbuild b/arch/blackfin/include/asm/Kbuild index 606ecfdcc96..09c31418cc0 100644 --- a/arch/blackfin/include/asm/Kbuild +++ b/arch/blackfin/include/asm/Kbuild @@ -1,3 +1,4 @@ include include/asm-generic/Kbuild.asm +unifdef-y += bfin_sport.h unifdef-y += fixed_code.h diff --git a/arch/blackfin/include/asm/bfin_sport.h b/arch/blackfin/include/asm/bfin_sport.h index fe88a2c1921..65a651db5b0 100644 --- a/arch/blackfin/include/asm/bfin_sport.h +++ b/arch/blackfin/include/asm/bfin_sport.h @@ -1,30 +1,9 @@ /* - * File: include/asm-blackfin/bfin_sport.h - * Based on: - * Author: Roy Huang (roy.huang@analog.com) + * bfin_sport.h - userspace header for bfin sport driver * - * Created: Thu Aug. 24 2006 - * Description: + * Copyright 2004-2008 Analog Devices Inc. * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #ifndef __BFIN_SPORT_H__ @@ -42,11 +21,10 @@ #define NORM_FORMAT 0x0 #define ALAW_FORMAT 0x2 #define ULAW_FORMAT 0x3 -struct sport_register; /* Function driver which use sport must initialize the structure */ struct sport_config { - /*TDM (multichannels), I2S or other mode */ + /* TDM (multichannels), I2S or other mode */ unsigned int mode:3; /* if TDM mode is selected, channels must be set */ @@ -72,12 +50,18 @@ struct sport_config { int serial_clk; int fsync_clk; - unsigned int data_format:2; /*Normal, u-law or a-law */ + unsigned int data_format:2; /* Normal, u-law or a-law */ int word_len; /* How length of the word in bits, 3-32 bits */ int dma_enabled; }; +/* Userspace interface */ +#define SPORT_IOC_MAGIC 'P' +#define SPORT_IOC_CONFIG _IOWR('P', 0x01, struct sport_config) + +#ifdef __KERNEL__ + struct sport_register { unsigned short tcr1; unsigned short reserved0; @@ -117,9 +101,6 @@ struct sport_register { unsigned long mrcs3; }; -#define SPORT_IOC_MAGIC 'P' -#define SPORT_IOC_CONFIG _IOWR('P', 0x01, struct sport_config) - struct sport_dev { struct cdev cdev; /* Char device structure */ @@ -149,6 +130,8 @@ struct sport_dev { struct sport_config config; }; +#endif + #define SPORT_TCR1 0 #define SPORT_TCR2 1 #define SPORT_TCLKDIV 2 @@ -169,4 +152,4 @@ struct sport_dev { #define SPORT_MRCS2 22 #define SPORT_MRCS3 23 -#endif /*__BFIN_SPORT_H__*/ +#endif diff --git a/arch/blackfin/include/asm/ipipe.h b/arch/blackfin/include/asm/ipipe.h index 76f53d8b9a0..343b56361ec 100644 --- a/arch/blackfin/include/asm/ipipe.h +++ b/arch/blackfin/include/asm/ipipe.h @@ -35,9 +35,9 @@ #include <asm/atomic.h> #include <asm/traps.h> -#define IPIPE_ARCH_STRING "1.8-00" +#define IPIPE_ARCH_STRING "1.9-00" #define IPIPE_MAJOR_NUMBER 1 -#define IPIPE_MINOR_NUMBER 8 +#define IPIPE_MINOR_NUMBER 9 #define IPIPE_PATCH_NUMBER 0 #ifdef CONFIG_SMP @@ -83,9 +83,9 @@ struct ipipe_sysinfo { "%2 = CYCLES2\n" \ "CC = %2 == %0\n" \ "if ! CC jump 1b\n" \ - : "=r" (((unsigned long *)&t)[1]), \ - "=r" (((unsigned long *)&t)[0]), \ - "=r" (__cy2) \ + : "=d,a" (((unsigned long *)&t)[1]), \ + "=d,a" (((unsigned long *)&t)[0]), \ + "=d,a" (__cy2) \ : /*no input*/ : "CC"); \ t; \ }) @@ -118,35 +118,40 @@ void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, #define __ipipe_disable_irq(irq) (irq_desc[irq].chip->mask(irq)) -#define __ipipe_lock_root() \ - set_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags) +static inline int __ipipe_check_tickdev(const char *devname) +{ + return 1; +} -#define __ipipe_unlock_root() \ - clear_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags) +static inline void __ipipe_lock_root(void) +{ + set_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)); +} + +static inline void __ipipe_unlock_root(void) +{ + clear_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)); +} void __ipipe_enable_pipeline(void); #define __ipipe_hook_critical_ipi(ipd) do { } while (0) -#define __ipipe_sync_pipeline(syncmask) \ - do { \ - struct ipipe_domain *ipd = ipipe_current_domain; \ - if (likely(ipd != ipipe_root_domain || !test_bit(IPIPE_ROOTLOCK_FLAG, &ipd->flags))) \ - __ipipe_sync_stage(syncmask); \ - } while (0) +#define __ipipe_sync_pipeline ___ipipe_sync_pipeline +void ___ipipe_sync_pipeline(unsigned long syncmask); void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs); int __ipipe_get_irq_priority(unsigned irq); -int __ipipe_get_irqthread_priority(unsigned irq); - void __ipipe_stall_root_raw(void); void __ipipe_unstall_root_raw(void); void __ipipe_serial_debug(const char *fmt, ...); +asmlinkage void __ipipe_call_irqtail(unsigned long addr); + DECLARE_PER_CPU(struct pt_regs, __ipipe_tick_regs); extern unsigned long __ipipe_core_clock; @@ -162,42 +167,25 @@ static inline unsigned long __ipipe_ffnz(unsigned long ul) #define __ipipe_run_irqtail() /* Must be a macro */ \ do { \ - asmlinkage void __ipipe_call_irqtail(void); \ unsigned long __pending; \ - CSYNC(); \ + CSYNC(); \ __pending = bfin_read_IPEND(); \ if (__pending & 0x8000) { \ __pending &= ~0x8010; \ if (__pending && (__pending & (__pending - 1)) == 0) \ - __ipipe_call_irqtail(); \ + __ipipe_call_irqtail(__ipipe_irq_tail_hook); \ } \ } while (0) #define __ipipe_run_isr(ipd, irq) \ do { \ if (ipd == ipipe_root_domain) { \ - /* \ - * Note: the I-pipe implements a threaded interrupt model on \ - * this arch for Linux external IRQs. The interrupt handler we \ - * call here only wakes up the associated IRQ thread. \ - */ \ - if (ipipe_virtual_irq_p(irq)) { \ - /* No irqtail here; virtual interrupts have no effect \ - on IPEND so there is no need for processing \ - deferral. */ \ - local_irq_enable_nohead(ipd); \ + local_irq_enable_hw(); \ + if (ipipe_virtual_irq_p(irq)) \ ipd->irqs[irq].handler(irq, ipd->irqs[irq].cookie); \ - local_irq_disable_nohead(ipd); \ - } else \ - /* \ - * No need to run the irqtail here either; \ - * we can't be preempted by hw IRQs, so \ - * non-Linux IRQs cannot stack over the short \ - * thread wakeup code. Which in turn means \ - * that no irqtail condition could be pending \ - * for domains above Linux in the pipeline. \ - */ \ + else \ ipd->irqs[irq].handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs)); \ + local_irq_disable_hw(); \ } else { \ __clear_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \ local_irq_enable_nohead(ipd); \ @@ -217,42 +205,24 @@ void ipipe_init_irq_threads(void); int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc); -#define IS_SYSIRQ(irq) ((irq) > IRQ_CORETMR && (irq) <= SYS_IRQS) -#define IS_GPIOIRQ(irq) ((irq) >= GPIO_IRQ_BASE && (irq) < NR_IRQS) - +#ifdef CONFIG_GENERIC_CLOCKEVENTS +#define IRQ_SYSTMR IRQ_CORETMR +#define IRQ_PRIOTMR IRQ_CORETMR +#else #define IRQ_SYSTMR IRQ_TIMER0 #define IRQ_PRIOTMR CONFIG_IRQ_TIMER0 +#endif -#if defined(CONFIG_BF531) || defined(CONFIG_BF532) || defined(CONFIG_BF533) -#define PRIO_GPIODEMUX(irq) CONFIG_PFA -#elif defined(CONFIG_BF534) || defined(CONFIG_BF536) || defined(CONFIG_BF537) -#define PRIO_GPIODEMUX(irq) CONFIG_IRQ_PROG_INTA -#elif defined(CONFIG_BF52x) -#define PRIO_GPIODEMUX(irq) ((irq) == IRQ_PORTF_INTA ? CONFIG_IRQ_PORTF_INTA : \ - (irq) == IRQ_PORTG_INTA ? CONFIG_IRQ_PORTG_INTA : \ - (irq) == IRQ_PORTH_INTA ? CONFIG_IRQ_PORTH_INTA : \ - -1) -#elif defined(CONFIG_BF561) -#define PRIO_GPIODEMUX(irq) ((irq) == IRQ_PROG0_INTA ? CONFIG_IRQ_PROG0_INTA : \ - (irq) == IRQ_PROG1_INTA ? CONFIG_IRQ_PROG1_INTA : \ - (irq) == IRQ_PROG2_INTA ? CONFIG_IRQ_PROG2_INTA : \ - -1) +#ifdef CONFIG_BF561 #define bfin_write_TIMER_DISABLE(val) bfin_write_TMRS8_DISABLE(val) #define bfin_write_TIMER_ENABLE(val) bfin_write_TMRS8_ENABLE(val) #define bfin_write_TIMER_STATUS(val) bfin_write_TMRS8_STATUS(val) #define bfin_read_TIMER_STATUS() bfin_read_TMRS8_STATUS() #elif defined(CONFIG_BF54x) -#define PRIO_GPIODEMUX(irq) ((irq) == IRQ_PINT0 ? CONFIG_IRQ_PINT0 : \ - (irq) == IRQ_PINT1 ? CONFIG_IRQ_PINT1 : \ - (irq) == IRQ_PINT2 ? CONFIG_IRQ_PINT2 : \ - (irq) == IRQ_PINT3 ? CONFIG_IRQ_PINT3 : \ - -1) #define bfin_write_TIMER_DISABLE(val) bfin_write_TIMER_DISABLE0(val) #define bfin_write_TIMER_ENABLE(val) bfin_write_TIMER_ENABLE0(val) #define bfin_write_TIMER_STATUS(val) bfin_write_TIMER_STATUS0(val) #define bfin_read_TIMER_STATUS(val) bfin_read_TIMER_STATUS0(val) -#else -# error "no PRIO_GPIODEMUX() for this part" #endif #define __ipipe_root_tick_p(regs) ((regs->ipend & 0x10) != 0) @@ -275,4 +245,6 @@ int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc); #endif /* !CONFIG_IPIPE */ +#define ipipe_update_tick_evtdev(evtdev) do { } while (0) + #endif /* !__ASM_BLACKFIN_IPIPE_H */ diff --git a/arch/blackfin/include/asm/ipipe_base.h b/arch/blackfin/include/asm/ipipe_base.h index cb1025aeabc..3e8acbd1a3b 100644 --- a/arch/blackfin/include/asm/ipipe_base.h +++ b/arch/blackfin/include/asm/ipipe_base.h @@ -1,5 +1,5 @@ /* -*- linux-c -*- - * include/asm-blackfin/_baseipipe.h + * include/asm-blackfin/ipipe_base.h * * Copyright (C) 2007 Philippe Gerum. * @@ -27,8 +27,9 @@ #define IPIPE_NR_XIRQS NR_IRQS #define IPIPE_IRQ_ISHIFT 5 /* 2^5 for 32bits arch. */ -/* Blackfin-specific, global domain flags */ -#define IPIPE_ROOTLOCK_FLAG 1 /* Lock pipeline for root */ +/* Blackfin-specific, per-cpu pipeline status */ +#define IPIPE_SYNCDEFER_FLAG 15 +#define IPIPE_SYNCDEFER_MASK (1L << IPIPE_SYNCDEFER_MASK) /* Blackfin traps -- i.e. exception vector numbers */ #define IPIPE_NR_FAULTS 52 /* We leave a gap after VEC_ILL_RES. */ @@ -48,11 +49,6 @@ #ifndef __ASSEMBLY__ -#include <linux/bitops.h> - -extern int test_bit(int nr, const void *addr); - - extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */ static inline void __ipipe_stall_root(void) diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h index 3d977909ce7..7645e85a5f6 100644 --- a/arch/blackfin/include/asm/irq.h +++ b/arch/blackfin/include/asm/irq.h @@ -61,20 +61,38 @@ void __ipipe_restore_root(unsigned long flags); #define raw_irqs_disabled_flags(flags) (!irqs_enabled_from_flags_hw(flags)) #define local_test_iflag_hw(x) irqs_enabled_from_flags_hw(x) -#define local_save_flags(x) \ - do { \ - (x) = __ipipe_test_root() ? \ +#define local_save_flags(x) \ + do { \ + (x) = __ipipe_test_root() ? \ __all_masked_irq_flags : bfin_irq_flags; \ + barrier(); \ } while (0) -#define local_irq_save(x) \ - do { \ - (x) = __ipipe_test_and_stall_root(); \ +#define local_irq_save(x) \ + do { \ + (x) = __ipipe_test_and_stall_root() ? \ + __all_masked_irq_flags : bfin_irq_flags; \ + barrier(); \ + } while (0) + +static inline void local_irq_restore(unsigned long x) +{ + barrier(); + __ipipe_restore_root(x == __all_masked_irq_flags); +} + +#define local_irq_disable() \ + do { \ + __ipipe_stall_root(); \ + barrier(); \ } while (0) -#define local_irq_restore(x) __ipipe_restore_root(x) -#define local_irq_disable() __ipipe_stall_root() -#define local_irq_enable() __ipipe_unstall_root() +static inline void local_irq_enable(void) +{ + barrier(); + __ipipe_unstall_root(); +} + #define irqs_disabled() __ipipe_test_root() #define local_save_flags_hw(x) \ diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h index e721ce55956..2920087516f 100644 --- a/arch/blackfin/include/asm/thread_info.h +++ b/arch/blackfin/include/asm/thread_info.h @@ -122,6 +122,7 @@ static inline struct thread_info *current_thread_info(void) #define TIF_MEMDIE 4 #define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */ #define TIF_FREEZE 6 /* is freezing for suspend */ +#define TIF_IRQ_SYNC 7 /* sync pipeline stage */ /* as above, but as bit values */ #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) @@ -130,6 +131,7 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) #define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK) #define _TIF_FREEZE (1<<TIF_FREEZE) +#define _TIF_IRQ_SYNC (1<<TIF_IRQ_SYNC) #define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */ diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index 4a92a86824b..fd4d4328a0f 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -15,13 +15,15 @@ else obj-y += time.o endif -CFLAGS_kgdb_test.o := -mlong-calls -O0 - obj-$(CONFIG_IPIPE) += ipipe.o obj-$(CONFIG_IPIPE_TRACE_MCOUNT) += mcount.o obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o obj-$(CONFIG_CPLB_INFO) += cplbinfo.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_KGDB) += kgdb.o -obj-$(CONFIG_KGDB_TESTCASE) += kgdb_test.o +obj-$(CONFIG_KGDB_TESTS) += kgdb_test.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o + +# the kgdb test puts code into L2 and without linker +# relaxation, we need to force long calls to/from it +CFLAGS_kgdb_test.o := -mlong-calls -O0 diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c index 0e28f759573..d6c067782e6 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c @@ -53,9 +53,13 @@ void __init generate_cplb_tables_cpu(unsigned int cpu) i_d = i_i = 0; +#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO /* Set up the zero page. */ d_tbl[i_d].addr = 0; d_tbl[i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB; + i_tbl[i_i].addr = 0; + i_tbl[i_i++].data = SDRAM_OOPS | PAGE_SIZE_1KB; +#endif /* Cover kernel memory with 4M pages. */ addr = 0; diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c index 339be5a3ae6..a5de8d45424 100644 --- a/arch/blackfin/kernel/ipipe.c +++ b/arch/blackfin/kernel/ipipe.c @@ -35,14 +35,8 @@ #include <asm/atomic.h> #include <asm/io.h> -static int create_irq_threads; - DEFINE_PER_CPU(struct pt_regs, __ipipe_tick_regs); -static DEFINE_PER_CPU(unsigned long, pending_irqthread_mask); - -static DEFINE_PER_CPU(int [IVG13 + 1], pending_irq_count); - asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs); static void __ipipe_no_irqtail(void); @@ -93,6 +87,7 @@ void __ipipe_enable_pipeline(void) */ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs) { + struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr(); struct ipipe_domain *this_domain, *next_domain; struct list_head *head, *pos; int m_ack, s = -1; @@ -104,7 +99,6 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs) * interrupt. */ m_ack = (regs == NULL || irq == IRQ_SYSTMR || irq == IRQ_CORETMR); - this_domain = ipipe_current_domain; if (unlikely(test_bit(IPIPE_STICKY_FLAG, &this_domain->irqs[irq].control))) @@ -114,49 +108,28 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs) next_domain = list_entry(head, struct ipipe_domain, p_link); if (likely(test_bit(IPIPE_WIRED_FLAG, &next_domain->irqs[irq].control))) { if (!m_ack && next_domain->irqs[irq].acknowledge != NULL) - next_domain->irqs[irq].acknowledge(irq, irq_desc + irq); - if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)) - s = __test_and_set_bit(IPIPE_STALL_FLAG, - &ipipe_root_cpudom_var(status)); + next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq)); + if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status)) + s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status); __ipipe_dispatch_wired(next_domain, irq); - goto finalize; - return; + goto out; } } /* Ack the interrupt. */ pos = head; - while (pos != &__ipipe_pipeline) { next_domain = list_entry(pos, struct ipipe_domain, p_link); - /* - * For each domain handling the incoming IRQ, mark it - * as pending in its log. - */ if (test_bit(IPIPE_HANDLE_FLAG, &next_domain->irqs[irq].control)) { - /* - * Domains that handle this IRQ are polled for - * acknowledging it by decreasing priority - * order. The interrupt must be made pending - * _first_ in the domain's status flags before - * the PIC is unlocked. - */ __ipipe_set_irq_pending(next_domain, irq); - if (!m_ack && next_domain->irqs[irq].acknowledge != NULL) { - next_domain->irqs[irq].acknowledge(irq, irq_desc + irq); + next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq)); m_ack = 1; } } - - /* - * If the domain does not want the IRQ to be passed - * down the interrupt pipe, exit the loop now. - */ if (!test_bit(IPIPE_PASS_FLAG, &next_domain->irqs[irq].control)) break; - pos = next_domain->p_link.next; } @@ -166,18 +139,24 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs) * immediately to the current domain if the interrupt has been * marked as 'sticky'. This search does not go beyond the * current domain in the pipeline. We also enforce the - * additional root stage lock (blackfin-specific). */ + * additional root stage lock (blackfin-specific). + */ + if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status)) + s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status); - if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)) - s = __test_and_set_bit(IPIPE_STALL_FLAG, - &ipipe_root_cpudom_var(status)); -finalize: + /* + * If the interrupt preempted the head domain, then do not + * even try to walk the pipeline, unless an interrupt is + * pending for it. + */ + if (test_bit(IPIPE_AHEAD_FLAG, &this_domain->flags) && + ipipe_head_cpudom_var(irqpend_himask) == 0) + goto out; __ipipe_walk_pipeline(head); - +out: if (!s) - __clear_bit(IPIPE_STALL_FLAG, - &ipipe_root_cpudom_var(status)); + __clear_bit(IPIPE_STALL_FLAG, &p->status); } int __ipipe_check_root(void) @@ -187,7 +166,7 @@ int __ipipe_check_root(void) void __ipipe_enable_irqdesc(struct ipipe_domain *ipd, unsigned irq) { - struct irq_desc *desc = irq_desc + irq; + struct irq_desc *desc = irq_to_desc(irq); int prio = desc->ic_prio; desc->depth = 0; @@ -199,7 +178,7 @@ EXPORT_SYMBOL(__ipipe_enable_irqdesc); void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, unsigned irq) { - struct irq_desc *desc = irq_desc + irq; + struct irq_desc *desc = irq_to_desc(irq); int prio = desc->ic_prio; if (ipd != &ipipe_root && @@ -236,15 +215,18 @@ int __ipipe_syscall_root(struct pt_regs *regs) { unsigned long flags; - /* We need to run the IRQ tail hook whenever we don't + /* + * We need to run the IRQ tail hook whenever we don't * propagate a syscall to higher domains, because we know that * important operations might be pending there (e.g. Xenomai - * deferred rescheduling). */ + * deferred rescheduling). + */ - if (!__ipipe_syscall_watched_p(current, regs->orig_p0)) { + if (regs->orig_p0 < NR_syscalls) { void (*hook)(void) = (void (*)(void))__ipipe_irq_tail_hook; hook(); - return 0; + if ((current->flags & PF_EVNOTIFY) == 0) + return 0; } /* @@ -312,112 +294,46 @@ int ipipe_trigger_irq(unsigned irq) { unsigned long flags; +#ifdef CONFIG_IPIPE_DEBUG if (irq >= IPIPE_NR_IRQS || (ipipe_virtual_irq_p(irq) && !test_bit(irq - IPIPE_VIRQ_BASE, &__ipipe_virtual_irq_map))) return -EINVAL; +#endif local_irq_save_hw(flags); - __ipipe_handle_irq(irq, NULL); - local_irq_restore_hw(flags); return 1; } -/* Move Linux IRQ to threads. */ - -static int do_irqd(void *__desc) +asmlinkage void __ipipe_sync_root(void) { - struct irq_desc *desc = __desc; - unsigned irq = desc - irq_desc; - int thrprio = desc->thr_prio; - int thrmask = 1 << thrprio; - int cpu = smp_processor_id(); - cpumask_t cpumask; - - sigfillset(¤t->blocked); - current->flags |= PF_NOFREEZE; - cpumask = cpumask_of_cpu(cpu); - set_cpus_allowed(current, cpumask); - ipipe_setscheduler_root(current, SCHED_FIFO, 50 + thrprio); - - while (!kthread_should_stop()) { - local_irq_disable(); - if (!(desc->status & IRQ_SCHEDULED)) { - set_current_state(TASK_INTERRUPTIBLE); -resched: - local_irq_enable(); - schedule(); - local_irq_disable(); - } - __set_current_state(TASK_RUNNING); - /* - * If higher priority interrupt servers are ready to - * run, reschedule immediately. We need this for the - * GPIO demux IRQ handler to unmask the interrupt line - * _last_, after all GPIO IRQs have run. - */ - if (per_cpu(pending_irqthread_mask, cpu) & ~(thrmask|(thrmask-1))) - goto resched; - if (--per_cpu(pending_irq_count[thrprio], cpu) == 0) - per_cpu(pending_irqthread_mask, cpu) &= ~thrmask; - desc->status &= ~IRQ_SCHEDULED; - desc->thr_handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs)); - local_irq_enable(); - } - __set_current_state(TASK_RUNNING); - return 0; -} + unsigned long flags; -static void kick_irqd(unsigned irq, void *cookie) -{ - struct irq_desc *desc = irq_desc + irq; - int thrprio = desc->thr_prio; - int thrmask = 1 << thrprio; - int cpu = smp_processor_id(); - - if (!(desc->status & IRQ_SCHEDULED)) { - desc->status |= IRQ_SCHEDULED; - per_cpu(pending_irqthread_mask, cpu) |= thrmask; - ++per_cpu(pending_irq_count[thrprio], cpu); - wake_up_process(desc->thread); - } -} + BUG_ON(irqs_disabled()); -int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc) -{ - if (desc->thread || !create_irq_threads) - return 0; - - desc->thread = kthread_create(do_irqd, desc, "IRQ %d", irq); - if (desc->thread == NULL) { - printk(KERN_ERR "irqd: could not create IRQ thread %d!\n", irq); - return -ENOMEM; - } + local_irq_save_hw(flags); - wake_up_process(desc->thread); + clear_thread_flag(TIF_IRQ_SYNC); - desc->thr_handler = ipipe_root_domain->irqs[irq].handler; - ipipe_root_domain->irqs[irq].handler = &kick_irqd; + if (ipipe_root_cpudom_var(irqpend_himask) != 0) + __ipipe_sync_pipeline(IPIPE_IRQMASK_ANY); - return 0; + local_irq_restore_hw(flags); } -void __init ipipe_init_irq_threads(void) +void ___ipipe_sync_pipeline(unsigned long syncmask) { - unsigned irq; - struct irq_desc *desc; - - create_irq_threads = 1; + struct ipipe_domain *ipd = ipipe_current_domain; - for (irq = 0; irq < NR_IRQS; irq++) { - desc = irq_desc + irq; - if (desc->action != NULL || - (desc->status & IRQ_NOREQUEST) != 0) - ipipe_start_irq_thread(irq, desc); + if (ipd == ipipe_root_domain) { + if (test_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status))) + return; } + + __ipipe_sync_stage(syncmask); } EXPORT_SYMBOL(show_stack); diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c index 75724eee649..7fd12656484 100644 --- a/arch/blackfin/kernel/irqchip.c +++ b/arch/blackfin/kernel/irqchip.c @@ -144,11 +144,15 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs) #endif generic_handle_irq(irq); -#ifndef CONFIG_IPIPE /* Useless and bugous over the I-pipe: IRQs are threaded. */ - /* If we're the only interrupt running (ignoring IRQ15 which is for - syscalls), lower our priority to IRQ14 so that softirqs run at - that level. If there's another, lower-level interrupt, irq_exit - will defer softirqs to that. */ +#ifndef CONFIG_IPIPE + /* + * If we're the only interrupt running (ignoring IRQ15 which + * is for syscalls), lower our priority to IRQ14 so that + * softirqs run at that level. If there's another, + * lower-level interrupt, irq_exit will defer softirqs to + * that. If the interrupt pipeline is enabled, we are already + * running at IRQ14 priority, so we don't need this code. + */ CSYNC(); pending = bfin_read_IPEND() & ~0x8000; other_ints = pending & (pending - 1); diff --git a/arch/blackfin/kernel/kgdb_test.c b/arch/blackfin/kernel/kgdb_test.c index 3dba9c17304..dbcf3e45cb0 100644 --- a/arch/blackfin/kernel/kgdb_test.c +++ b/arch/blackfin/kernel/kgdb_test.c @@ -20,6 +20,7 @@ static char cmdline[256]; static unsigned long len; +#ifndef CONFIG_SMP static int num1 __attribute__((l1_data)); void kgdb_l1_test(void) __attribute__((l1_text)); @@ -32,6 +33,8 @@ void kgdb_l1_test(void) printk(KERN_ALERT "L1(after change) : data variable addr = 0x%p, data value is %d\n", &num1, num1); return ; } +#endif + #if L2_LENGTH static int num2 __attribute__((l2)); @@ -59,10 +62,12 @@ int kgdb_test(char *name, int len, int count, int z) static int test_proc_output(char *buf) { kgdb_test("hello world!", 12, 0x55, 0x10); +#ifndef CONFIG_SMP kgdb_l1_test(); - #if L2_LENGTH +#endif +#if L2_LENGTH kgdb_l2_test(); - #endif +#endif return 0; } diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c index 594e325b40e..d76618db50d 100644 --- a/arch/blackfin/kernel/ptrace.c +++ b/arch/blackfin/kernel/ptrace.c @@ -45,6 +45,7 @@ #include <asm/asm-offsets.h> #include <asm/dma.h> #include <asm/fixed_code.h> +#include <asm/cacheflush.h> #include <asm/mem_map.h> #define TEXT_OFFSET 0 @@ -240,7 +241,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) } else if (addr >= FIXED_CODE_START && addr + sizeof(tmp) <= FIXED_CODE_END) { - memcpy(&tmp, (const void *)(addr), sizeof(tmp)); + copy_from_user_page(0, 0, 0, &tmp, (const void *)(addr), sizeof(tmp)); copied = sizeof(tmp); } else @@ -320,7 +321,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) } else if (addr >= FIXED_CODE_START && addr + sizeof(data) <= FIXED_CODE_END) { - memcpy((void *)(addr), &data, sizeof(data)); + copy_to_user_page(0, 0, 0, (void *)(addr), &data, sizeof(data)); copied = sizeof(data); } else diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index e5c11623080..a58687bdee6 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -889,6 +889,10 @@ void __init setup_arch(char **cmdline_p) CPU, bfin_revid()); } + /* We can't run on BF548-0.1 due to ANOMALY 05000448 */ + if (bfin_cpuid() == 0x27de && bfin_revid() == 1) + panic("You can't run on this processor due to 05000448\n"); + printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n"); printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n", @@ -1141,12 +1145,12 @@ static int show_cpuinfo(struct seq_file *m, void *v) icache_size = 0; seq_printf(m, "cache size\t: %d KB(L1 icache) " - "%d KB(L1 dcache-%s) %d KB(L2 cache)\n", + "%d KB(L1 dcache%s) %d KB(L2 cache)\n", icache_size, dcache_size, #if defined CONFIG_BFIN_WB - "wb" + "-wb" #elif defined CONFIG_BFIN_WT - "wt" + "-wt" #endif "", 0); diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c index 172b4c58846..1bbacfbd4c5 100644 --- a/arch/blackfin/kernel/time.c +++ b/arch/blackfin/kernel/time.c @@ -134,7 +134,10 @@ irqreturn_t timer_interrupt(int irq, void *dummy) write_seqlock(&xtime_lock); #if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE) -/* FIXME: Here TIMIL0 is not set when IPIPE enabled, why? */ + /* + * TIMIL0 is latched in __ipipe_grab_irq() when the I-Pipe is + * enabled. + */ if (get_gptimer_status(0) & TIMER_STATUS_TIMIL0) { #endif do_timer(1); diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c index 0e175342112..41f2eacfef2 100644 --- a/arch/blackfin/mach-bf518/boards/ezbrd.c +++ b/arch/blackfin/mach-bf518/boards/ezbrd.c @@ -113,7 +113,6 @@ static struct platform_device bfin_mac_device = { .name = "bfin_mac", .dev.platform_data = &bfin_mii_bus, }; -#endif #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) static struct dsa_platform_data ksz8893m_switch_data = { @@ -132,6 +131,7 @@ static struct platform_device ksz8893m_switch_device = { .dev.platform_data = &ksz8893m_switch_data, }; #endif +#endif #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) @@ -171,6 +171,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) #if defined(CONFIG_NET_DSA_KSZ8893M) \ || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) /* SPI SWITCH CHIP */ @@ -179,10 +180,11 @@ static struct bfin5xx_spi_chip spi_switch_info = { .bits_per_word = 8, }; #endif +#endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, .bits_per_word = 8, }; #endif @@ -259,6 +261,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) #if defined(CONFIG_NET_DSA_KSZ8893M) \ || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) { @@ -271,24 +274,15 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif +#endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc_dummy", + .modalias = "mmc_spi", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 0, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, - { - .modalias = "spi_mmc", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif @@ -630,11 +624,10 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) &bfin_mii_bus, &bfin_mac_device, -#endif - #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) &ksz8893m_switch_device, #endif +#endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) &bfin_spi0_device, diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h index e5b4bef0eda..c847bb10107 100644 --- a/arch/blackfin/mach-bf518/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h @@ -2,12 +2,12 @@ * File: include/asm-blackfin/mach-bf518/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2008 Analog Devices Inc. + * Copyright (C) 2004-2009 Analog Devices Inc. * Licensed under the GPL-2 or later. */ /* This file shoule be up to date with: - * - ???? + * - Revision B, 02/03/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -19,6 +19,8 @@ #define ANOMALY_05000122 (1) /* False Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (1) +/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */ +#define ANOMALY_05000254 (1) /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ #define ANOMALY_05000265 (1) /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ @@ -53,6 +55,12 @@ #define ANOMALY_05000443 (1) /* Incorrect L1 Instruction Bank B Memory Map Location */ #define ANOMALY_05000444 (1) +/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */ +#define ANOMALY_05000452 (1) +/* PWM_TRIPB Signal Not Available on PG10 */ +#define ANOMALY_05000453 (1) +/* PPI_FS3 is Driven One Half Cycle Later Than PPI Data */ +#define ANOMALY_05000455 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000125 (0) @@ -65,15 +73,20 @@ #define ANOMALY_05000263 (0) #define ANOMALY_05000266 (0) #define ANOMALY_05000273 (0) +#define ANOMALY_05000278 (0) #define ANOMALY_05000285 (0) +#define ANOMALY_05000305 (0) #define ANOMALY_05000307 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000312 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000353 (0) #define ANOMALY_05000363 (0) +#define ANOMALY_05000380 (0) #define ANOMALY_05000386 (0) #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) +#define ANOMALY_05000447 (0) +#define ANOMALY_05000448 (0) #endif diff --git a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h index b50a63b975a..e21c1c3e4ec 100644 --- a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h @@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART0_TX, CH_UART0_RX, #endif -#ifdef CONFIG_BFIN_UART0_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART0_CTS_PIN, CONFIG_UART0_RTS_PIN, #endif @@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART1_TX, CH_UART1_RX, #endif -#ifdef CONFIG_BFIN_UART1_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART1_CTS_PIN, CONFIG_UART1_RTS_PIN, #endif diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index 856c097b531..48e69eecdba 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -487,9 +487,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = { }; #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, .bits_per_word = 8, }; #endif @@ -585,23 +585,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .controller_data = &ad9960_spi_chip_info, }, #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc_dummy", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 0, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, - { - .modalias = "spi_mmc", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .modalias = "mmc_spi", + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index 83606fcdde2..7fe480e4ebe 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -256,9 +256,9 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, .bits_per_word = 8, }; #endif @@ -366,23 +366,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc_dummy", + .modalias = "mmc_spi", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 0, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, - { - .modalias = "spi_mmc", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h index 035e8d83505..df6808d8a6e 100644 --- a/arch/blackfin/mach-bf527/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h @@ -2,7 +2,7 @@ * File: include/asm-blackfin/mach-bf527/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2008 Analog Devices Inc. + * Copyright (C) 2004-2009 Analog Devices Inc. * Licensed under the GPL-2 or later. */ @@ -167,12 +167,16 @@ #define ANOMALY_05000263 (0) #define ANOMALY_05000266 (0) #define ANOMALY_05000273 (0) +#define ANOMALY_05000278 (0) #define ANOMALY_05000285 (0) +#define ANOMALY_05000305 (0) #define ANOMALY_05000307 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000312 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000363 (0) #define ANOMALY_05000412 (0) +#define ANOMALY_05000447 (0) +#define ANOMALY_05000448 (0) #endif diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h index 75722d6008b..e8c41fd842b 100644 --- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h @@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART0_TX, CH_UART0_RX, #endif -#ifdef CONFIG_BFIN_UART0_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART0_CTS_PIN, CONFIG_UART0_RTS_PIN, #endif @@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART1_TX, CH_UART1_RX, #endif -#ifdef CONFIG_BFIN_UART1_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART1_CTS_PIN, CONFIG_UART1_RTS_PIN, #endif diff --git a/arch/blackfin/mach-bf533/boards/Kconfig b/arch/blackfin/mach-bf533/boards/Kconfig index 308c98dc5ab..8d8b3e7321e 100644 --- a/arch/blackfin/mach-bf533/boards/Kconfig +++ b/arch/blackfin/mach-bf533/boards/Kconfig @@ -38,9 +38,4 @@ config BFIN532_IP0X help Core support for IP04/IP04 open hardware IP-PBX. -config GENERIC_BF533_BOARD - bool "Generic" - help - Generic or Custom board support. - endchoice diff --git a/arch/blackfin/mach-bf533/boards/Makefile b/arch/blackfin/mach-bf533/boards/Makefile index 9afbe72b484..ff1e832f80d 100644 --- a/arch/blackfin/mach-bf533/boards/Makefile +++ b/arch/blackfin/mach-bf533/boards/Makefile @@ -2,7 +2,6 @@ # arch/blackfin/mach-bf533/boards/Makefile # -obj-$(CONFIG_GENERIC_BF533_BOARD) += generic_board.o obj-$(CONFIG_BFIN533_STAMP) += stamp.o obj-$(CONFIG_BFIN532_IP0X) += ip0x.o obj-$(CONFIG_BFIN533_EZKIT) += ezkit.o diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c index 015c18f85e7..0765872a8ad 100644 --- a/arch/blackfin/mach-bf533/boards/blackstamp.c +++ b/arch/blackfin/mach-bf533/boards/blackstamp.c @@ -101,9 +101,9 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, .bits_per_word = 8, }; #endif @@ -129,23 +129,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) - { - .modalias = "spi_mmc_dummy", - .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 0, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc", + .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index e7061c7e8c4..e8974878d8c 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -96,9 +96,9 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { }; #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, .bits_per_word = 8, }; #endif @@ -138,23 +138,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) - { - .modalias = "spi_mmc_dummy", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 0, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc", + .modalias = "mmc_spi", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/arch/blackfin/mach-bf533/boards/generic_board.c b/arch/blackfin/mach-bf533/boards/generic_board.c deleted file mode 100644 index 986eeec53b1..00000000000 --- a/arch/blackfin/mach-bf533/boards/generic_board.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * File: arch/blackfin/mach-bf533/generic_board.c - * Based on: arch/blackfin/mach-bf533/ezkit.c - * Author: Aidan Williams <aidan@nicta.com.au> - * - * Created: 2005 - * Description: - * - * Modified: - * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/irq.h> - -/* - * Name the Board for the /proc/cpuinfo - */ -const char bfin_board_name[] = "UNKNOWN BOARD"; - -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) -static struct platform_device rtc_device = { - .name = "rtc-bfin", - .id = -1, -}; -#endif - -/* - * Driver needs to know address, irq and flag pin. - */ -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) -static struct resource smc91x_resources[] = { - { - .start = 0x20300300, - .end = 0x20300300 + 16, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_PROG_INTB, - .end = IRQ_PROG_INTB, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, { - .start = IRQ_PF7, - .end = IRQ_PF7, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; -#endif - -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -#ifdef CONFIG_BFIN_SIR0 -static struct resource bfin_sir0_resources[] = { - { - .start = 0xFFC00400, - .end = 0xFFC004FF, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, - .flags = IORESOURCE_IRQ, - }, - { - .start = CH_UART0_RX, - .end = CH_UART0_RX+1, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device bfin_sir0_device = { - .name = "bfin_sir", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir0_resources), - .resource = bfin_sir0_resources, -}; -#endif -#endif - -static struct platform_device *generic_board_devices[] __initdata = { -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) - &rtc_device, -#endif - -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) - &smc91x_device, -#endif - -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -#ifdef CONFIG_BFIN_SIR0 - &bfin_sir0_device, -#endif -#endif -}; - -static int __init generic_board_init(void) -{ - printk(KERN_INFO "%s(): registering device resources\n", __func__); - return platform_add_devices(generic_board_devices, ARRAY_SIZE(generic_board_devices)); -} - -arch_initcall(generic_board_init); diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c index e30b1b7d144..f19b63378b1 100644 --- a/arch/blackfin/mach-bf533/boards/ip0x.c +++ b/arch/blackfin/mach-bf533/boards/ip0x.c @@ -127,8 +127,8 @@ static struct platform_device dm9000_device2 = { #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* all SPI peripherals info goes here */ -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { /* * CPOL (Clock Polarity) * 0 - Active high SCK @@ -152,14 +152,13 @@ static struct bfin5xx_spi_chip spi_mmc_chip_info = { /* Notice: for blackfin, the speed_hz is the value of register * SPI_BAUD, not the real baudrate */ static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc", + .modalias = "mmc_spi", .max_speed_hz = 2, .bus_num = 1, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, }, #endif }; diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h index 0d3a03429fb..1cf893e2e55 100644 --- a/arch/blackfin/mach-bf533/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h @@ -2,7 +2,7 @@ * File: include/asm-blackfin/mach-bf533/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2008 Analog Devices Inc. + * Copyright (C) 2004-2009 Analog Devices Inc. * Licensed under the GPL-2 or later. */ @@ -160,7 +160,7 @@ #define ANOMALY_05000301 (__SILICON_REVISION__ < 6) /* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */ #define ANOMALY_05000302 (__SILICON_REVISION__ < 5) -/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */ +/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */ #define ANOMALY_05000305 (__SILICON_REVISION__ < 5) /* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */ #define ANOMALY_05000306 (__SILICON_REVISION__ < 5) @@ -278,9 +278,12 @@ #define ANOMALY_05000266 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000353 (1) +#define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) +#define ANOMALY_05000447 (0) +#define ANOMALY_05000448 (0) #endif diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h index f3d9e495230..5f517f53b0f 100644 --- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h @@ -134,7 +134,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART_TX, CH_UART_RX, #endif -#ifdef CONFIG_BFIN_UART0_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART0_CTS_PIN, CONFIG_UART0_RTS_PIN, #endif diff --git a/arch/blackfin/mach-bf537/boards/Kconfig b/arch/blackfin/mach-bf537/boards/Kconfig index 42a57b0acb2..77c59da87e8 100644 --- a/arch/blackfin/mach-bf537/boards/Kconfig +++ b/arch/blackfin/mach-bf537/boards/Kconfig @@ -33,9 +33,4 @@ config CAMSIG_MINOTAUR help Board supply package for CSP Minotaur -config GENERIC_BF537_BOARD - bool "Generic" - help - Generic or Custom board support. - endchoice diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile index 7168cc14afd..68b98a7af6a 100644 --- a/arch/blackfin/mach-bf537/boards/Makefile +++ b/arch/blackfin/mach-bf537/boards/Makefile @@ -2,7 +2,6 @@ # arch/blackfin/mach-bf537/boards/Makefile # -obj-$(CONFIG_GENERIC_BF537_BOARD) += generic_board.o obj-$(CONFIG_BFIN537_STAMP) += stamp.o obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM) += tcm_bf537.o diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c index 9cd8fb2a30d..41c75b9bfac 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -108,9 +108,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = { }; #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, .bits_per_word = 8, }; #endif @@ -160,23 +160,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) - { - .modalias = "spi_mmc_dummy", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 7, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .modalias = "mmc_spi", + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 1, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c deleted file mode 100644 index da710fdc456..00000000000 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ /dev/null @@ -1,745 +0,0 @@ -/* - * File: arch/blackfin/mach-bf537/boards/generic_board.c - * Based on: arch/blackfin/mach-bf533/boards/ezkit.c - * Author: Aidan Williams <aidan@nicta.com.au> - * - * Created: - * Description: - * - * Modified: - * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2008 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/device.h> -#include <linux/etherdevice.h> -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) -#include <linux/usb/isp1362.h> -#endif -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/usb/sl811.h> -#include <asm/dma.h> -#include <asm/bfin5xx_spi.h> -#include <asm/reboot.h> -#include <asm/portmux.h> -#include <linux/spi/ad7877.h> - -/* - * Name the Board for the /proc/cpuinfo - */ -const char bfin_board_name[] = "UNKNOWN BOARD"; - -/* - * Driver needs to know address, irq and flag pin. - */ - -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) -#include <linux/usb/isp1760.h> -static struct resource bfin_isp1760_resources[] = { - [0] = { - .start = 0x203C0000, - .end = 0x203C0000 + 0x000fffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PF7, - .end = IRQ_PF7, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct isp1760_platform_data isp1760_priv = { - .is_isp1761 = 0, - .port1_disable = 0, - .bus_width_16 = 1, - .port1_otg = 0, - .analog_oc = 0, - .dack_polarity_high = 0, - .dreq_polarity_high = 0, -}; - -static struct platform_device bfin_isp1760_device = { - .name = "isp1760-hcd", - .id = 0, - .dev = { - .platform_data = &isp1760_priv, - }, - .num_resources = ARRAY_SIZE(bfin_isp1760_resources), - .resource = bfin_isp1760_resources, -}; -#endif - -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) -static struct resource bfin_pcmcia_cf_resources[] = { - { - .start = 0x20310000, /* IO PORT */ - .end = 0x20312000, - .flags = IORESOURCE_MEM, - }, { - .start = 0x20311000, /* Attribute Memory */ - .end = 0x20311FFF, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_PF4, - .end = IRQ_PF4, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, { - .start = 6, /* Card Detect PF6 */ - .end = 6, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_pcmcia_cf_device = { - .name = "bfin_cf_pcmcia", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources), - .resource = bfin_pcmcia_cf_resources, -}; -#endif - -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) -static struct platform_device rtc_device = { - .name = "rtc-bfin", - .id = -1, -}; -#endif - -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) -static struct resource smc91x_resources[] = { - { - .name = "smc91x-regs", - .start = 0x20300300, - .end = 0x20300300 + 16, - .flags = IORESOURCE_MEM, - }, { - - .start = IRQ_PF7, - .end = IRQ_PF7, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; -#endif - -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) -static struct resource dm9000_resources[] = { - [0] = { - .start = 0x203FB800, - .end = 0x203FB800 + 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0x203FB800 + 4, - .end = 0x203FB800 + 5, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = IRQ_PF9, - .end = IRQ_PF9, - .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE), - }, -}; - -static struct platform_device dm9000_device = { - .name = "dm9000", - .id = -1, - .num_resources = ARRAY_SIZE(dm9000_resources), - .resource = dm9000_resources, -}; -#endif - -#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) -static struct resource sl811_hcd_resources[] = { - { - .start = 0x20340000, - .end = 0x20340000, - .flags = IORESOURCE_MEM, - }, { - .start = 0x20340004, - .end = 0x20340004, - .flags = IORESOURCE_MEM, - }, { - .start = CONFIG_USB_SL811_BFIN_IRQ, - .end = CONFIG_USB_SL811_BFIN_IRQ, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) -void sl811_port_power(struct device *dev, int is_on) -{ - gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); - gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on); - -} -#endif - -static struct sl811_platform_data sl811_priv = { - .potpg = 10, - .power = 250, /* == 500mA */ -#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) - .port_power = &sl811_port_power, -#endif -}; - -static struct platform_device sl811_hcd_device = { - .name = "sl811-hcd", - .id = 0, - .dev = { - .platform_data = &sl811_priv, - }, - .num_resources = ARRAY_SIZE(sl811_hcd_resources), - .resource = sl811_hcd_resources, -}; -#endif - -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) -static struct resource isp1362_hcd_resources[] = { - { - .start = 0x20360000, - .end = 0x20360000, - .flags = IORESOURCE_MEM, - }, { - .start = 0x20360004, - .end = 0x20360004, - .flags = IORESOURCE_MEM, - }, { - .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, - .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -static struct isp1362_platform_data isp1362_priv = { - .sel15Kres = 1, - .clknotstop = 0, - .oc_enable = 0, - .int_act_high = 0, - .int_edge_triggered = 0, - .remote_wakeup_connected = 0, - .no_power_switching = 1, - .power_switching_mode = 0, -}; - -static struct platform_device isp1362_hcd_device = { - .name = "isp1362-hcd", - .id = 0, - .dev = { - .platform_data = &isp1362_priv, - }, - .num_resources = ARRAY_SIZE(isp1362_hcd_resources), - .resource = isp1362_hcd_resources, -}; -#endif - -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) -static struct platform_device bfin_mii_bus = { - .name = "bfin_mii_bus", -}; - -static struct platform_device bfin_mac_device = { - .name = "bfin_mac", - .dev.platform_data = &bfin_mii_bus, -}; -#endif - -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) -static struct resource net2272_bfin_resources[] = { - { - .start = 0x20300000, - .end = 0x20300000 + 0x100, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_PF7, - .end = IRQ_PF7, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -static struct platform_device net2272_bfin_device = { - .name = "net2272", - .id = -1, - .num_resources = ARRAY_SIZE(net2272_bfin_resources), - .resource = net2272_bfin_resources, -}; -#endif - -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) -/* all SPI peripherals info goes here */ - -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) -static struct mtd_partition bfin_spi_flash_partitions[] = { - { - .name = "bootloader(spi)", - .size = 0x00020000, - .offset = 0, - .mask_flags = MTD_CAP_ROM - }, { - .name = "linux kernel(spi)", - .size = 0xe0000, - .offset = 0x20000 - }, { - .name = "file system(spi)", - .size = 0x700000, - .offset = 0x00100000, - } -}; - -static struct flash_platform_data bfin_spi_flash_data = { - .name = "m25p80", - .parts = bfin_spi_flash_partitions, - .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), - .type = "m25p64", -}; - -/* SPI flash chip (m25p64) */ -static struct bfin5xx_spi_chip spi_flash_chip_info = { - .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_SPI_ADC_BF533) \ - || defined(CONFIG_SPI_ADC_BF533_MODULE) -/* SPI ADC chip */ -static struct bfin5xx_spi_chip spi_adc_chip_info = { - .enable_dma = 1, /* use dma transfer with this chip*/ - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) -static struct bfin5xx_spi_chip ad1836_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) -static struct bfin5xx_spi_chip ad9960_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_PBX) -static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { - .ctl_reg = 0x4, /* send zero */ - .enable_dma = 0, - .bits_per_word = 8, - .cs_change_per_word = 1, -}; -#endif - -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) -static struct bfin5xx_spi_chip spi_ad7877_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; - -static const struct ad7877_platform_data bfin_ad7877_ts_info = { - .model = 7877, - .vref_delay_usecs = 50, /* internal, no capacitor */ - .x_plate_ohms = 419, - .y_plate_ohms = 486, - .pressure_max = 1000, - .pressure_min = 0, - .stopacq_polarity = 1, - .first_conversion_delay = 3, - .acquisition_time = 1, - .averaging = 1, - .pen_down_acc_interval = 1, -}; -#endif - -static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) - { - /* the modalias must be the same as spi device driver name */ - .modalias = "m25p80", /* Name of spi_driver for this device */ - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ - .platform_data = &bfin_spi_flash_data, - .controller_data = &spi_flash_chip_info, - .mode = SPI_MODE_3, - }, -#endif - -#if defined(CONFIG_SPI_ADC_BF533) \ - || defined(CONFIG_SPI_ADC_BF533_MODULE) - { - .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ - .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* Framework chip select. */ - .platform_data = NULL, /* No spi_driver specific config */ - .controller_data = &spi_adc_chip_info, - }, -#endif - -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) - { - .modalias = "ad1836-spi", - .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, - .controller_data = &ad1836_spi_chip_info, - }, -#endif -#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) - { - .modalias = "ad9960-spi", - .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 1, - .controller_data = &ad9960_spi_chip_info, - }, -#endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) - { - .modalias = "spi_mmc_dummy", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 0, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, - { - .modalias = "spi_mmc", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, -#endif -#if defined(CONFIG_PBX) - { - .modalias = "fxs-spi", - .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 8 - CONFIG_J11_JUMPER, - .controller_data = &spi_si3xxx_chip_info, - .mode = SPI_MODE_3, - }, - { - .modalias = "fxo-spi", - .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 8 - CONFIG_J19_JUMPER, - .controller_data = &spi_si3xxx_chip_info, - .mode = SPI_MODE_3, - }, -#endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) - { - .modalias = "ad7877", - .platform_data = &bfin_ad7877_ts_info, - .irq = IRQ_PF6, - .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 1, - .controller_data = &spi_ad7877_chip_info, - }, -#endif -}; - -/* SPI controller data */ -static struct bfin5xx_spi_master bfin_spi0_info = { - .num_chipselect = 8, - .enable_dma = 1, /* master has the ability to do dma transfer */ - .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, -}; - -/* SPI (0) */ -static struct resource bfin_spi0_resource[] = { - [0] = { - .start = SPI0_REGBASE, - .end = SPI0_REGBASE + 0xFF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = CH_SPI, - .end = CH_SPI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_spi0_device = { - .name = "bfin-spi", - .id = 0, /* Bus number */ - .num_resources = ARRAY_SIZE(bfin_spi0_resource), - .resource = bfin_spi0_resource, - .dev = { - .platform_data = &bfin_spi0_info, /* Passed to driver */ - }, -}; -#endif /* spi master and devices */ - -#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) -static struct platform_device bfin_fb_device = { - .name = "bf537-lq035", -}; -#endif - -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) -static struct platform_device bfin_fb_adv7393_device = { - .name = "bfin-adv7393", -}; -#endif - -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) -static struct resource bfin_uart_resources[] = { - { - .start = 0xFFC00400, - .end = 0xFFC004FF, - .flags = IORESOURCE_MEM, - }, { - .start = 0xFFC02000, - .end = 0xFFC020FF, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device bfin_uart_device = { - .name = "bfin-uart", - .id = 1, - .num_resources = ARRAY_SIZE(bfin_uart_resources), - .resource = bfin_uart_resources, -}; -#endif - -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -#ifdef CONFIG_BFIN_SIR0 -static struct resource bfin_sir0_resources[] = { - { - .start = 0xFFC00400, - .end = 0xFFC004FF, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, - .flags = IORESOURCE_IRQ, - }, - { - .start = CH_UART0_RX, - .end = CH_UART0_RX+1, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device bfin_sir0_device = { - .name = "bfin_sir", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir0_resources), - .resource = bfin_sir0_resources, -}; -#endif -#ifdef CONFIG_BFIN_SIR1 -static struct resource bfin_sir1_resources[] = { - { - .start = 0xFFC02000, - .end = 0xFFC020FF, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_UART1_RX, - .end = IRQ_UART1_RX+1, - .flags = IORESOURCE_IRQ, - }, - { - .start = CH_UART1_RX, - .end = CH_UART1_RX+1, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device bfin_sir1_device = { - .name = "bfin_sir", - .id = 1, - .num_resources = ARRAY_SIZE(bfin_sir1_resources), - .resource = bfin_sir1_resources, -}; -#endif -#endif - -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) -static struct resource bfin_twi0_resource[] = { - [0] = { - .start = TWI0_REGBASE, - .end = TWI0_REGBASE + 0xFF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_TWI, - .end = IRQ_TWI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device i2c_bfin_twi_device = { - .name = "i2c-bfin-twi", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_twi0_resource), - .resource = bfin_twi0_resource, -}; -#endif - -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) -static struct platform_device bfin_sport0_uart_device = { - .name = "bfin-sport-uart", - .id = 0, -}; - -static struct platform_device bfin_sport1_uart_device = { - .name = "bfin-sport-uart", - .id = 1, -}; -#endif - -static struct platform_device *stamp_devices[] __initdata = { -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) - &bfin_pcmcia_cf_device, -#endif - -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) - &rtc_device, -#endif - -#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) - &sl811_hcd_device, -#endif - -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) - &isp1362_hcd_device, -#endif - -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) - &smc91x_device, -#endif - -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) - &dm9000_device, -#endif - -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) - &bfin_mii_bus, - &bfin_mac_device, -#endif - -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) - &net2272_bfin_device, -#endif - -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) - &bfin_isp1760_device, -#endif - -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &bfin_spi0_device, -#endif - -#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) - &bfin_fb_device, -#endif - -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) - &bfin_fb_adv7393_device, -#endif - -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) - &bfin_uart_device, -#endif - -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -#ifdef CONFIG_BFIN_SIR0 - &bfin_sir0_device, -#endif -#ifdef CONFIG_BFIN_SIR1 - &bfin_sir1_device, -#endif -#endif - -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) - &i2c_bfin_twi_device, -#endif - -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) - &bfin_sport0_uart_device, - &bfin_sport1_uart_device, -#endif -}; - -static int __init generic_init(void) -{ - printk(KERN_INFO "%s(): registering device resources\n", __func__); - platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - spi_register_board_info(bfin_spi_board_info, - ARRAY_SIZE(bfin_spi_board_info)); -#endif - - return 0; -} - -arch_initcall(generic_init); - -void native_machine_restart(char *cmd) -{ - /* workaround reboot hang when booting from SPI */ - if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); -} - -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) -void bfin_get_ether_addr(char *addr) -{ - random_ether_addr(addr); - printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__); -} -EXPORT_SYMBOL(bfin_get_ether_addr); -#endif diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c index db7d3a385e4..3c159819e55 100644 --- a/arch/blackfin/mach-bf537/boards/minotaur.c +++ b/arch/blackfin/mach-bf537/boards/minotaur.c @@ -134,9 +134,9 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, .bits_per_word = 8, }; #endif @@ -156,23 +156,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc_dummy", + .modalias = "mmc_spi", .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 0, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, - { - .modalias = "spi_mmc", - .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 590eb3a139b..4e1de1e53f8 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -289,9 +289,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = { }; #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, .bits_per_word = 8, }; #endif @@ -364,23 +364,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .controller_data = &ad9960_spi_chip_info, }, #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) - { - .modalias = "spi_mmc_dummy", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 7, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc", + .modalias = "mmc_spi", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c index 3f4f203a06e..53ad10f3cd7 100644 --- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c @@ -108,9 +108,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = { }; #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, .bits_per_word = 8, }; #endif @@ -160,23 +160,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) - { - .modalias = "spi_mmc_dummy", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 7, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc", + .modalias = "mmc_spi", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h index 9cb39121d1c..1bfd80c26c9 100644 --- a/arch/blackfin/mach-bf537/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h @@ -2,7 +2,7 @@ * File: include/asm-blackfin/mach-bf537/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2008 Analog Devices Inc. + * Copyright (C) 2004-2009 Analog Devices Inc. * Licensed under the GPL-2 or later. */ @@ -110,7 +110,7 @@ #define ANOMALY_05000301 (1) /* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */ #define ANOMALY_05000304 (__SILICON_REVISION__ < 3) -/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */ +/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */ #define ANOMALY_05000305 (__SILICON_REVISION__ < 3) /* SCKELOW Bit Does Not Maintain State Through Hibernate */ #define ANOMALY_05000307 (__SILICON_REVISION__ < 3) @@ -168,9 +168,12 @@ #define ANOMALY_05000323 (0) #define ANOMALY_05000353 (1) #define ANOMALY_05000363 (0) +#define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) +#define ANOMALY_05000447 (0) +#define ANOMALY_05000448 (0) #endif diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h index b3f87e1d16a..9e34700844a 100644 --- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h @@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART0_TX, CH_UART0_RX, #endif -#ifdef CONFIG_BFIN_UART0_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART0_CTS_PIN, CONFIG_UART0_RTS_PIN, #endif @@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART1_TX, CH_UART1_RX, #endif -#ifdef CONFIG_BFIN_UART1_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART1_CTS_PIN, CONFIG_UART1_RTS_PIN, #endif diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h index e130b4f8a05..3a569982736 100644 --- a/arch/blackfin/mach-bf538/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h @@ -2,7 +2,7 @@ * File: include/asm-blackfin/mach-bf538/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2008 Analog Devices Inc. + * Copyright (C) 2004-2009 Analog Devices Inc. * Licensed under the GPL-2 or later. */ @@ -120,13 +120,17 @@ #define ANOMALY_05000198 (0) #define ANOMALY_05000230 (0) #define ANOMALY_05000263 (0) +#define ANOMALY_05000305 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000353 (1) #define ANOMALY_05000363 (0) +#define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) +#define ANOMALY_05000447 (0) +#define ANOMALY_05000448 (0) #endif diff --git a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h index 40503b6b89a..3c2811ebecd 100644 --- a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h @@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART0_TX, CH_UART0_RX, #endif -#ifdef CONFIG_BFIN_UART0_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART0_CTS_PIN, CONFIG_UART0_RTS_PIN, #endif @@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART1_TX, CH_UART1_RX, #endif -#ifdef CONFIG_BFIN_UART1_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART1_CTS_PIN, CONFIG_UART1_RTS_PIN, #endif diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h index 23d03c52f4b..882e40ccf0d 100644 --- a/arch/blackfin/mach-bf548/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h @@ -2,12 +2,12 @@ * File: include/asm-blackfin/mach-bf548/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2008 Analog Devices Inc. + * Copyright (C) 2004-2009 Analog Devices Inc. * Licensed under the GPL-2 or later. */ /* This file shoule be up to date with: - * - Revision G, 08/07/2008; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List + * - Revision H, 01/16/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -91,8 +91,6 @@ #define ANOMALY_05000371 (__SILICON_REVISION__ < 2) /* USB DP/DM Data Pins May Lose State When Entering Hibernate */ #define ANOMALY_05000372 (__SILICON_REVISION__ < 1) -/* Mobile DDR Operation Not Functional */ -#define ANOMALY_05000377 (1) /* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */ #define ANOMALY_05000378 (__SILICON_REVISION__ < 2) /* 16-Bit NAND FLASH Boot Mode Is Not Functional */ @@ -157,8 +155,22 @@ #define ANOMALY_05000429 (__SILICON_REVISION__ < 2) /* Software System Reset Corrupts PLL_LOCKCNT Register */ #define ANOMALY_05000430 (__SILICON_REVISION__ >= 2) +/* Incorrect Use of Stack in Lockbox Firmware During Authentication */ +#define ANOMALY_05000431 (__SILICON_REVISION__ < 3) +/* OTP Write Accesses Not Supported */ +#define ANOMALY_05000442 (__SILICON_REVISION__ < 1) /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ #define ANOMALY_05000443 (1) +/* CDMAPRIO and L2DMAPRIO Bits in the SYSCR Register Are Not Functional */ +#define ANOMALY_05000446 (1) +/* UART IrDA Receiver Fails on Extended Bit Pulses */ +#define ANOMALY_05000447 (1) +/* DDR Clock Duty Cycle Spec Violation (tCH, tCL) */ +#define ANOMALY_05000448 (__SILICON_REVISION__ == 1) +/* Reduced Timing Margins on DDR Output Setup and Hold (tDS and tDH) */ +#define ANOMALY_05000449 (__SILICON_REVISION__ == 1) +/* USB DMA Mode 1 Short Packet Data Corruption */ +#define ANOMALY_05000450 (1 /* Anomalies that don't exist on this proc */ #define ANOMALY_05000125 (0) @@ -171,6 +183,8 @@ #define ANOMALY_05000263 (0) #define ANOMALY_05000266 (0) #define ANOMALY_05000273 (0) +#define ANOMALY_05000278 (0) +#define ANOMALY_05000305 (0) #define ANOMALY_05000307 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000323 (0) diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h index e4cf35e7ab9..c05e79cba25 100644 --- a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h @@ -63,7 +63,7 @@ #define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v) #define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF) -#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) +#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART2_CTSRTS) # define CONFIG_SERIAL_BFIN_CTSRTS # ifndef CONFIG_UART0_CTS_PIN @@ -74,12 +74,12 @@ # define CONFIG_UART0_RTS_PIN -1 # endif -# ifndef CONFIG_UART1_CTS_PIN -# define CONFIG_UART1_CTS_PIN -1 +# ifndef CONFIG_UART2_CTS_PIN +# define CONFIG_UART2_CTS_PIN -1 # endif -# ifndef CONFIG_UART1_RTS_PIN -# define CONFIG_UART1_RTS_PIN -1 +# ifndef CONFIG_UART2_RTS_PIN +# define CONFIG_UART2_RTS_PIN -1 # endif #endif @@ -130,7 +130,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART0_TX, CH_UART0_RX, #endif -#ifdef CONFIG_BFIN_UART0_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART0_CTS_PIN, CONFIG_UART0_RTS_PIN, #endif @@ -144,6 +144,10 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART1_TX, CH_UART1_RX, #endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + 0, + 0, +#endif }, #endif #ifdef CONFIG_SERIAL_BFIN_UART2 @@ -154,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART2_TX, CH_UART2_RX, #endif -#ifdef CONFIG_BFIN_UART2_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART2_CTS_PIN, CONFIG_UART2_RTS_PIN, #endif @@ -168,6 +172,10 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART3_TX, CH_UART3_RX, #endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + 0, + 0, +#endif }, #endif }; diff --git a/arch/blackfin/mach-bf548/include/mach/irq.h b/arch/blackfin/mach-bf548/include/mach/irq.h index 60299a71e09..f194625f682 100644 --- a/arch/blackfin/mach-bf548/include/mach/irq.h +++ b/arch/blackfin/mach-bf548/include/mach/irq.h @@ -123,8 +123,8 @@ Events (highest priority) EMU 0 #define IRQ_MXVR_ERROR BFIN_IRQ(51) /* MXVR Status (Error) Interrupt */ #define IRQ_MXVR_MSG BFIN_IRQ(52) /* MXVR Message Interrupt */ #define IRQ_MXVR_PKT BFIN_IRQ(53) /* MXVR Packet Interrupt */ -#define IRQ_EPP1_ERROR BFIN_IRQ(54) /* EPPI1 Error Interrupt */ -#define IRQ_EPP2_ERROR BFIN_IRQ(55) /* EPPI2 Error Interrupt */ +#define IRQ_EPPI1_ERROR BFIN_IRQ(54) /* EPPI1 Error Interrupt */ +#define IRQ_EPPI2_ERROR BFIN_IRQ(55) /* EPPI2 Error Interrupt */ #define IRQ_UART3_ERROR BFIN_IRQ(56) /* UART3 Status (Error) Interrupt */ #define IRQ_HOST_ERROR BFIN_IRQ(57) /* HOST Status (Error) Interrupt */ #define IRQ_PIXC_ERROR BFIN_IRQ(59) /* PIXC Status (Error) Interrupt */ @@ -361,8 +361,8 @@ Events (highest priority) EMU 0 #define IRQ_UART2_ERR IRQ_UART2_ERROR #define IRQ_CAN0_ERR IRQ_CAN0_ERROR #define IRQ_MXVR_ERR IRQ_MXVR_ERROR -#define IRQ_EPP1_ERR IRQ_EPP1_ERROR -#define IRQ_EPP2_ERR IRQ_EPP2_ERROR +#define IRQ_EPPI1_ERR IRQ_EPPI1_ERROR +#define IRQ_EPPI2_ERR IRQ_EPPI2_ERROR #define IRQ_UART3_ERR IRQ_UART3_ERROR #define IRQ_HOST_ERR IRQ_HOST_ERROR #define IRQ_PIXC_ERR IRQ_PIXC_ERROR diff --git a/arch/blackfin/mach-bf561/boards/Kconfig b/arch/blackfin/mach-bf561/boards/Kconfig index e41a67b1fb5..e4bc6d7c5a6 100644 --- a/arch/blackfin/mach-bf561/boards/Kconfig +++ b/arch/blackfin/mach-bf561/boards/Kconfig @@ -19,9 +19,4 @@ config BFIN561_BLUETECHNIX_CM help CM-BF561 support for EVAL- and DEV-Board. -config GENERIC_BF561_BOARD - bool "Generic" - help - Generic or Custom board support. - endchoice diff --git a/arch/blackfin/mach-bf561/boards/Makefile b/arch/blackfin/mach-bf561/boards/Makefile index 04add010b56..3a152559e95 100644 --- a/arch/blackfin/mach-bf561/boards/Makefile +++ b/arch/blackfin/mach-bf561/boards/Makefile @@ -2,7 +2,6 @@ # arch/blackfin/mach-bf561/boards/Makefile # -obj-$(CONFIG_GENERIC_BF561_BOARD) += generic_board.o obj-$(CONFIG_BFIN561_BLUETECHNIX_CM) += cm_bf561.o obj-$(CONFIG_BFIN561_EZKIT) += ezkit.o obj-$(CONFIG_BFIN561_TEPLA) += tepla.o diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index 6880d1ebfe6..f623c6b0719 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -105,9 +105,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = { }; #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, .bits_per_word = 8, }; #endif @@ -155,14 +155,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .controller_data = &ad9960_spi_chip_info, }, #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc", + .modalias = "mmc_spi", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/arch/blackfin/mach-bf561/boards/generic_board.c b/arch/blackfin/mach-bf561/boards/generic_board.c deleted file mode 100644 index 0ba366a0e69..00000000000 --- a/arch/blackfin/mach-bf561/boards/generic_board.c +++ /dev/null @@ -1,113 +0,0 @@ -/* - * File: arch/blackfin/mach-bf561/generic_board.c - * Based on: arch/blackfin/mach-bf533/ezkit.c - * Author: Aidan Williams <aidan@nicta.com.au> - * - * Created: - * Description: - * - * Modified: - * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/irq.h> - -const char bfin_board_name[] = "UNKNOWN BOARD"; - -/* - * Driver needs to know address, irq and flag pin. - */ -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) -static struct resource smc91x_resources[] = { - { - .start = 0x2C010300, - .end = 0x2C010300 + 16, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_PROG_INTB, - .end = IRQ_PROG_INTB, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, { - .start = IRQ_PF9, - .end = IRQ_PF9, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; -#endif - -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -#ifdef CONFIG_BFIN_SIR0 -static struct resource bfin_sir0_resources[] = { - { - .start = 0xFFC00400, - .end = 0xFFC004FF, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, - .flags = IORESOURCE_IRQ, - }, - { - .start = CH_UART0_RX, - .end = CH_UART0_RX+1, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device bfin_sir0_device = { - .name = "bfin_sir", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir0_resources), - .resource = bfin_sir0_resources, -}; -#endif -#endif - -static struct platform_device *generic_board_devices[] __initdata = { -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) - &smc91x_device, -#endif - -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -#ifdef CONFIG_BFIN_SIR0 - &bfin_sir0_device, -#endif -#endif -}; - -static int __init generic_board_init(void) -{ - printk(KERN_INFO "%s(): registering device resources\n", __func__); - return platform_add_devices(generic_board_devices, - ARRAY_SIZE(generic_board_devices)); -} - -arch_initcall(generic_board_init); diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h index 1a9e1756282..d0b0b350644 100644 --- a/arch/blackfin/mach-bf561/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h @@ -2,7 +2,7 @@ * File: include/asm-blackfin/mach-bf561/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2008 Analog Devices Inc. + * Copyright (C) 2004-2009 Analog Devices Inc. * Licensed under the GPL-2 or later. */ @@ -224,7 +224,7 @@ #define ANOMALY_05000301 (1) /* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */ #define ANOMALY_05000302 (1) -/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */ +/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */ #define ANOMALY_05000305 (__SILICON_REVISION__ < 5) /* SCKELOW Bit Does Not Maintain State Through Hibernate */ #define ANOMALY_05000307 (__SILICON_REVISION__ < 5) @@ -283,8 +283,11 @@ #define ANOMALY_05000273 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000353 (1) +#define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) +#define ANOMALY_05000447 (0) +#define ANOMALY_05000448 (0) #endif diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h index 043bfcf26c5..ca8c5f64520 100644 --- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h @@ -134,7 +134,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART_TX, CH_UART_RX, #endif -#ifdef CONFIG_BFIN_UART0_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART0_CTS_PIN, CONFIG_UART0_RTS_PIN, #endif diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c index 98133b968f7..80d39b2f9db 100644 --- a/arch/blackfin/mach-common/arch_checks.c +++ b/arch/blackfin/mach-common/arch_checks.c @@ -62,3 +62,12 @@ #if (CONFIG_BOOT_LOAD & 0x3) # error "The kernel load address must be 4 byte aligned" #endif + +/* The entire kernel must be able to make a 24bit pcrel call to start of L1 */ +#if ((0xffffffff - L1_CODE_START + 1) + CONFIG_BOOT_LOAD) > 0x1000000 +# error "The kernel load address is too high; keep it below 10meg for safety" +#endif + +#if ANOMALY_05000448 +# error You are using a part with anomaly 05000448, this issue causes random memory read/write failures - that means random crashes. +#endif diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S index 3c98dacbf28..aa0648c6a9f 100644 --- a/arch/blackfin/mach-common/cache.S +++ b/arch/blackfin/mach-common/cache.S @@ -66,11 +66,33 @@ /* Invalidate all instruction cache lines assocoiated with this memory area */ ENTRY(_blackfin_icache_flush_range) +/* + * Walkaround to avoid loading wrong instruction after invalidating icache + * and following sequence is met. + * + * 1) One instruction address is cached in the instruction cache. + * 2) This instruction in SDRAM is changed. + * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range(). + * 4) This instruction is executed again, but the old one is loaded. + */ + P0 = R0; + IFLUSH[P0]; do_flush IFLUSH, , nop ENDPROC(_blackfin_icache_flush_range) /* Flush all cache lines assocoiated with this area of memory. */ ENTRY(_blackfin_icache_dcache_flush_range) +/* + * Walkaround to avoid loading wrong instruction after invalidating icache + * and following sequence is met. + * + * 1) One instruction address is cached in the instruction cache. + * 2) This instruction in SDRAM is changed. + * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range(). + * 4) This instruction is executed again, but the old one is loaded. + */ + P0 = R0; + IFLUSH[P0]; do_flush FLUSH, IFLUSH ENDPROC(_blackfin_icache_dcache_flush_range) diff --git a/arch/blackfin/mach-common/clocks-init.c b/arch/blackfin/mach-common/clocks-init.c index 9dddb6f8cc8..35393651359 100644 --- a/arch/blackfin/mach-common/clocks-init.c +++ b/arch/blackfin/mach-common/clocks-init.c @@ -17,7 +17,7 @@ #define SDGCTL_WIDTH (1 << 31) /* SDRAM external data path width */ #define PLL_CTL_VAL \ (((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \ - (PLL_BYPASS << 8) | (ANOMALY_05000265 ? 0x8000 : 0)) + (PLL_BYPASS << 8) | (ANOMALY_05000305 ? 0 : 0x8000)) __attribute__((l1_text)) static void do_sync(void) diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S index 4da50bcd930..8009a512fb1 100644 --- a/arch/blackfin/mach-common/dpmc_modes.S +++ b/arch/blackfin/mach-common/dpmc_modes.S @@ -376,10 +376,22 @@ ENTRY(_do_hibernate) #endif #ifdef PINT0_ASSIGN + PM_SYS_PUSH(PINT0_MASK_SET) + PM_SYS_PUSH(PINT1_MASK_SET) + PM_SYS_PUSH(PINT2_MASK_SET) + PM_SYS_PUSH(PINT3_MASK_SET) PM_SYS_PUSH(PINT0_ASSIGN) PM_SYS_PUSH(PINT1_ASSIGN) PM_SYS_PUSH(PINT2_ASSIGN) PM_SYS_PUSH(PINT3_ASSIGN) + PM_SYS_PUSH(PINT0_INVERT_SET) + PM_SYS_PUSH(PINT1_INVERT_SET) + PM_SYS_PUSH(PINT2_INVERT_SET) + PM_SYS_PUSH(PINT3_INVERT_SET) + PM_SYS_PUSH(PINT0_EDGE_SET) + PM_SYS_PUSH(PINT1_EDGE_SET) + PM_SYS_PUSH(PINT2_EDGE_SET) + PM_SYS_PUSH(PINT3_EDGE_SET) #endif PM_SYS_PUSH(EBIU_AMBCTL0) @@ -714,10 +726,22 @@ ENTRY(_do_hibernate) PM_SYS_POP(EBIU_AMBCTL0) #ifdef PINT0_ASSIGN + PM_SYS_POP(PINT3_EDGE_SET) + PM_SYS_POP(PINT2_EDGE_SET) + PM_SYS_POP(PINT1_EDGE_SET) + PM_SYS_POP(PINT0_EDGE_SET) + PM_SYS_POP(PINT3_INVERT_SET) + PM_SYS_POP(PINT2_INVERT_SET) + PM_SYS_POP(PINT1_INVERT_SET) + PM_SYS_POP(PINT0_INVERT_SET) PM_SYS_POP(PINT3_ASSIGN) PM_SYS_POP(PINT2_ASSIGN) PM_SYS_POP(PINT1_ASSIGN) PM_SYS_POP(PINT0_ASSIGN) + PM_SYS_POP(PINT3_MASK_SET) + PM_SYS_POP(PINT2_MASK_SET) + PM_SYS_POP(PINT1_MASK_SET) + PM_SYS_POP(PINT0_MASK_SET) #endif #ifdef SICA_IWR1 diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 88de053bbe8..21e65a339a2 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -600,6 +600,19 @@ ENTRY(_system_call) p2 = [p2]; [p2+(TASK_THREAD+THREAD_KSP)] = sp; +#ifdef CONFIG_IPIPE + r0 = sp; + SP += -12; + call ___ipipe_syscall_root; + SP += 12; + cc = r0 == 1; + if cc jump .Lsyscall_really_exit; + cc = r0 == -1; + if cc jump .Lresume_userspace; + r3 = [sp + PT_R3]; + r4 = [sp + PT_R4]; + p0 = [sp + PT_ORIG_P0]; +#endif /* CONFIG_IPIPE */ /* Check the System Call */ r7 = __NR_syscall; @@ -654,6 +667,17 @@ ENTRY(_system_call) r7 = r7 & r4; .Lsyscall_resched: +#ifdef CONFIG_IPIPE + cc = BITTST(r7, TIF_IRQ_SYNC); + if !cc jump .Lsyscall_no_irqsync; + [--sp] = reti; + r0 = [sp++]; + SP += -12; + call ___ipipe_sync_root; + SP += 12; + jump .Lresume_userspace_1; +.Lsyscall_no_irqsync: +#endif cc = BITTST(r7, TIF_NEED_RESCHED); if !cc jump .Lsyscall_sigpending; @@ -685,6 +709,10 @@ ENTRY(_system_call) .Lsyscall_really_exit: r5 = [sp + PT_RESERVED]; rets = r5; +#ifdef CONFIG_IPIPE + [--sp] = reti; + r5 = [sp++]; +#endif /* CONFIG_IPIPE */ rts; ENDPROC(_system_call) @@ -771,6 +799,15 @@ _new_old_task: ENDPROC(_resume) ENTRY(_ret_from_exception) +#ifdef CONFIG_IPIPE + [--sp] = rets; + SP += -12; + call ___ipipe_check_root + SP += 12 + rets = [sp++]; + cc = r0 == 0; + if cc jump 4f; /* not on behalf of Linux, get out */ +#endif /* CONFIG_IPIPE */ p2.l = lo(IPEND); p2.h = hi(IPEND); @@ -827,6 +864,28 @@ ENTRY(_ret_from_exception) rts; ENDPROC(_ret_from_exception) +#ifdef CONFIG_IPIPE + +_sync_root_irqs: + [--sp] = reti; /* Reenable interrupts */ + r0 = [sp++]; + jump.l ___ipipe_sync_root + +_resume_kernel_from_int: + r0.l = _sync_root_irqs + r0.h = _sync_root_irqs + [--sp] = rets; + [--sp] = ( r7:4, p5:3 ); + SP += -12; + call ___ipipe_call_irqtail + SP += 12; + ( r7:4, p5:3 ) = [sp++]; + rets = [sp++]; + rts +#else +#define _resume_kernel_from_int 2f +#endif + ENTRY(_return_from_int) /* If someone else already raised IRQ 15, do nothing. */ csync; @@ -848,7 +907,7 @@ ENTRY(_return_from_int) r1 = r0 - r1; r2 = r0 & r1; cc = r2 == 0; - if !cc jump 2f; + if !cc jump _resume_kernel_from_int; /* Lower the interrupt level to 15. */ p0.l = lo(EVT15); diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S index 43c4eb9acb6..0069c2dd462 100644 --- a/arch/blackfin/mach-common/interrupt.S +++ b/arch/blackfin/mach-common/interrupt.S @@ -235,6 +235,7 @@ ENDPROC(_evt_system_call) #ifdef CONFIG_IPIPE ENTRY(___ipipe_call_irqtail) + p0 = r0; r0.l = 1f; r0.h = 1f; reti = r0; @@ -242,9 +243,6 @@ ENTRY(___ipipe_call_irqtail) 1: [--sp] = rets; [--sp] = ( r7:4, p5:3 ); - p0.l = ___ipipe_irq_tail_hook; - p0.h = ___ipipe_irq_tail_hook; - p0 = [p0]; sp += -12; call (p0); sp += 12; @@ -259,7 +257,7 @@ ENTRY(___ipipe_call_irqtail) p0.h = hi(EVT14); [p0] = r0; csync; - r0 = 0x401f; + r0 = 0x401f (z); sti r0; raise 14; [--sp] = reti; /* IRQs on. */ @@ -277,11 +275,7 @@ ENTRY(___ipipe_call_irqtail) p0.h = _bfin_irq_flags; r0 = [p0]; sti r0; -#if 0 /* FIXME: this actually raises scheduling latencies */ - /* Reenable interrupts */ - [--sp] = reti; - r0 = [sp++]; -#endif rts; ENDPROC(___ipipe_call_irqtail) + #endif /* CONFIG_IPIPE */ diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 202494568c6..a7d7b2dd405 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -161,11 +161,15 @@ static void bfin_core_unmask_irq(unsigned int irq) static void bfin_internal_mask_irq(unsigned int irq) { + unsigned long flags; + #ifdef CONFIG_BF53x + local_irq_save_hw(flags); bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() & ~(1 << SIC_SYSIRQ(irq))); #else unsigned mask_bank, mask_bit; + local_irq_save_hw(flags); mask_bank = SIC_SYSIRQ(irq) / 32; mask_bit = SIC_SYSIRQ(irq) % 32; bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) & @@ -175,15 +179,20 @@ static void bfin_internal_mask_irq(unsigned int irq) ~(1 << mask_bit)); #endif #endif + local_irq_restore_hw(flags); } static void bfin_internal_unmask_irq(unsigned int irq) { + unsigned long flags; + #ifdef CONFIG_BF53x + local_irq_save_hw(flags); bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() | (1 << SIC_SYSIRQ(irq))); #else unsigned mask_bank, mask_bit; + local_irq_save_hw(flags); mask_bank = SIC_SYSIRQ(irq) / 32; mask_bit = SIC_SYSIRQ(irq) % 32; bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) | @@ -193,6 +202,7 @@ static void bfin_internal_unmask_irq(unsigned int irq) (1 << mask_bit)); #endif #endif + local_irq_restore_hw(flags); } #ifdef CONFIG_PM @@ -390,7 +400,7 @@ static void bfin_demux_error_irq(unsigned int int_err_irq, static inline void bfin_set_irq_handler(unsigned irq, irq_flow_handler_t handle) { #ifdef CONFIG_IPIPE - _set_irq_handler(irq, handle_edge_irq); + _set_irq_handler(irq, handle_level_irq); #else struct irq_desc *desc = irq_desc + irq; /* May not call generic set_irq_handler() due to spinlock @@ -1055,13 +1065,18 @@ int __init init_arch_irq(void) #endif default: #ifdef CONFIG_IPIPE - /* - * We want internal interrupt sources to be masked, because - * ISRs may trigger interrupts recursively (e.g. DMA), but - * interrupts are _not_ masked at CPU level. So let's handle - * them as level interrupts. - */ - set_irq_handler(irq, handle_level_irq); + /* + * We want internal interrupt sources to be + * masked, because ISRs may trigger interrupts + * recursively (e.g. DMA), but interrupts are + * _not_ masked at CPU level. So let's handle + * most of them as level interrupts, except + * the timer interrupt which is special. + */ + if (irq == IRQ_SYSTMR || irq == IRQ_CORETMR) + set_irq_handler(irq, handle_simple_irq); + else + set_irq_handler(irq, handle_level_irq); #else /* !CONFIG_IPIPE */ set_irq_handler(irq, handle_simple_irq); #endif /* !CONFIG_IPIPE */ @@ -1123,9 +1138,8 @@ int __init init_arch_irq(void) #ifdef CONFIG_IPIPE for (irq = 0; irq < NR_IRQS; irq++) { - struct irq_desc *desc = irq_desc + irq; + struct irq_desc *desc = irq_to_desc(irq); desc->ic_prio = __ipipe_get_irq_priority(irq); - desc->thr_prio = __ipipe_get_irqthread_priority(irq); } #endif /* CONFIG_IPIPE */ @@ -1208,76 +1222,21 @@ int __ipipe_get_irq_priority(unsigned irq) return IVG15; } -int __ipipe_get_irqthread_priority(unsigned irq) -{ - int ient, prio; - int demux_irq; - - /* The returned priority value is rescaled to [0..IVG13+1] - * with 0 being the lowest effective priority level. */ - - if (irq <= IRQ_CORETMR) - return IVG13 - irq + 1; - - /* GPIO IRQs are given the priority of the demux - * interrupt. */ - if (IS_GPIOIRQ(irq)) { -#if defined(CONFIG_BF54x) - u32 bank = PINT_2_BANK(irq2pint_lut[irq - SYS_IRQS]); - demux_irq = (bank == 0 ? IRQ_PINT0 : - bank == 1 ? IRQ_PINT1 : - bank == 2 ? IRQ_PINT2 : - IRQ_PINT3); -#elif defined(CONFIG_BF561) - demux_irq = (irq >= IRQ_PF32 ? IRQ_PROG2_INTA : - irq >= IRQ_PF16 ? IRQ_PROG1_INTA : - IRQ_PROG0_INTA); -#elif defined(CONFIG_BF52x) - demux_irq = (irq >= IRQ_PH0 ? IRQ_PORTH_INTA : - irq >= IRQ_PG0 ? IRQ_PORTG_INTA : - IRQ_PORTF_INTA); -#else - demux_irq = irq; -#endif - return IVG13 - PRIO_GPIODEMUX(demux_irq) + 1; - } - - /* The GPIO demux interrupt is given a lower priority - * than the GPIO IRQs, so that its threaded handler - * unmasks the interrupt line after the decoded IRQs - * have been processed. */ - prio = PRIO_GPIODEMUX(irq); - /* demux irq? */ - if (prio != -1) - return IVG13 - prio; - - for (ient = 0; ient < NR_PERI_INTS; ient++) { - struct ivgx *ivg = ivg_table + ient; - if (ivg->irqno == irq) { - for (prio = 0; prio <= IVG13-IVG7; prio++) { - if (ivg7_13[prio].ifirst <= ivg && - ivg7_13[prio].istop > ivg) - return IVG7 - prio; - } - } - } - - return 0; -} - /* Hw interrupts are disabled on entry (check SAVE_CONTEXT). */ #ifdef CONFIG_DO_IRQ_L1 __attribute__((l1_text)) #endif asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs) { + struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr(); + struct ipipe_domain *this_domain = ipipe_current_domain; struct ivgx *ivg_stop = ivg7_13[vec-IVG7].istop; struct ivgx *ivg = ivg7_13[vec-IVG7].ifirst; - int irq; + int irq, s; if (likely(vec == EVT_IVTMR_P)) { irq = IRQ_CORETMR; - goto handle_irq; + goto core_tick; } SSYNC(); @@ -1319,24 +1278,39 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs) irq = ivg->irqno; if (irq == IRQ_SYSTMR) { +#ifdef CONFIG_GENERIC_CLOCKEVENTS +core_tick: +#else bfin_write_TIMER_STATUS(1); /* Latch TIMIL0 */ +#endif /* This is basically what we need from the register frame. */ __raw_get_cpu_var(__ipipe_tick_regs).ipend = regs->ipend; __raw_get_cpu_var(__ipipe_tick_regs).pc = regs->pc; - if (!ipipe_root_domain_p) - __raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10; - else + if (this_domain != ipipe_root_domain) __raw_get_cpu_var(__ipipe_tick_regs).ipend &= ~0x10; + else + __raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10; } -handle_irq: +#ifndef CONFIG_GENERIC_CLOCKEVENTS +core_tick: +#endif + if (this_domain == ipipe_root_domain) { + s = __test_and_set_bit(IPIPE_SYNCDEFER_FLAG, &p->status); + barrier(); + } ipipe_trace_irq_entry(irq); __ipipe_handle_irq(irq, regs); - ipipe_trace_irq_exit(irq); + ipipe_trace_irq_exit(irq); - if (ipipe_root_domain_p) - return !test_bit(IPIPE_STALL_FLAG, &ipipe_root_cpudom_var(status)); + if (this_domain == ipipe_root_domain) { + set_thread_flag(TIF_IRQ_SYNC); + if (!s) { + __clear_bit(IPIPE_SYNCDEFER_FLAG, &p->status); + return !test_bit(IPIPE_STALL_FLAG, &p->status); + } + } return 0; } diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index 77c99284709..93eab614607 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -158,10 +158,14 @@ static irqreturn_t ipi_handler(int irq, void *dev_instance) kfree(msg); break; case BFIN_IPI_CALL_FUNC: + spin_unlock(&msg_queue->lock); ipi_call_function(cpu, msg); + spin_lock(&msg_queue->lock); break; case BFIN_IPI_CPU_STOP: + spin_unlock(&msg_queue->lock); ipi_cpu_stop(cpu); + spin_lock(&msg_queue->lock); kfree(msg); break; default: @@ -457,7 +461,7 @@ void smp_icache_flush_range_others(unsigned long start, unsigned long end) smp_flush_data.start = start; smp_flush_data.end = end; - if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 1)) + if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 0)) printk(KERN_WARNING "SMP: failed to run I-cache flush request on other CPUs\n"); } EXPORT_SYMBOL_GPL(smp_icache_flush_range_others); diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c index d0532b72bba..9c3629b9a68 100644 --- a/arch/blackfin/mm/init.c +++ b/arch/blackfin/mm/init.c @@ -104,7 +104,7 @@ void __init paging_init(void) } } -asmlinkage void init_pda(void) +asmlinkage void __init init_pda(void) { unsigned int cpu = raw_smp_processor_id(); diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 4eb45c01249..153e727a6e8 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -638,6 +638,17 @@ config DMAR and include PCI device scope covered by these DMA remapping devices. +config DMAR_DEFAULT_ON + def_bool y + prompt "Enable DMA Remapping Devices by default" + depends on DMAR + help + Selecting this option will enable a DMAR device at boot time if + one is found. If this option is not selected, DMAR support can + be enabled by passing intel_iommu=on to the kernel. It is + recommended you say N here while the DMAR code remains + experimental. + endmenu endif diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c index 5cfd3d91001..e13125058be 100644 --- a/arch/ia64/kernel/iosapic.c +++ b/arch/ia64/kernel/iosapic.c @@ -507,7 +507,7 @@ static int iosapic_find_sharable_irq(unsigned long trigger, unsigned long pol) if (trigger == IOSAPIC_EDGE) return -EINVAL; - for (i = 0; i <= NR_IRQS; i++) { + for (i = 0; i < NR_IRQS; i++) { info = &iosapic_intr_info[i]; if (info->trigger == trigger && info->polarity == pol && (info->dmode == IOSAPIC_FIXED || diff --git a/arch/ia64/kernel/unwind.c b/arch/ia64/kernel/unwind.c index 67810b77d99..b6c0e63a0bf 100644 --- a/arch/ia64/kernel/unwind.c +++ b/arch/ia64/kernel/unwind.c @@ -2149,7 +2149,7 @@ unw_remove_unwind_table (void *handle) /* next, remove hash table entries for this table */ - for (index = 0; index <= UNW_HASH_SIZE; ++index) { + for (index = 0; index < UNW_HASH_SIZE; ++index) { tmp = unw.cache + unw.hash[index]; if (unw.hash[index] >= UNW_CACHE_SIZE || tmp->ip < table->start || tmp->ip >= table->end) diff --git a/arch/ia64/sn/pci/pcibr/pcibr_dma.c b/arch/ia64/sn/pci/pcibr/pcibr_dma.c index e626e50a938..060df4aa991 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_dma.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_dma.c @@ -135,11 +135,10 @@ pcibr_dmatrans_direct64(struct pcidev_info * info, u64 paddr, if (SN_DMA_ADDRTYPE(dma_flags) == SN_DMA_ADDR_PHYS) pci_addr = IS_PIC_SOFT(pcibus_info) ? PHYS_TO_DMA(paddr) : - PHYS_TO_TIODMA(paddr) | dma_attributes; + PHYS_TO_TIODMA(paddr); else - pci_addr = IS_PIC_SOFT(pcibus_info) ? - paddr : - paddr | dma_attributes; + pci_addr = paddr; + pci_addr |= dma_attributes; /* Handle Bus mode */ if (IS_PCIX(pcibus_info)) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 600eef3f3ac..e61465a18c7 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -603,7 +603,7 @@ config CAVIUM_OCTEON_SIMULATOR select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_HIGHMEM - select CPU_CAVIUM_OCTEON + select SYS_HAS_CPU_CAVIUM_OCTEON help The Octeon simulator is software performance model of the Cavium Octeon Processor. It supports simulating Octeon processors on x86 @@ -618,7 +618,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_HIGHMEM select SYS_HAS_EARLY_PRINTK - select CPU_CAVIUM_OCTEON + select SYS_HAS_CPU_CAVIUM_OCTEON select SWAP_IO_SPACE help This option supports all of the Octeon reference boards from Cavium @@ -1234,6 +1234,7 @@ config CPU_SB1 config CPU_CAVIUM_OCTEON bool "Cavium Octeon processor" + depends on SYS_HAS_CPU_CAVIUM_OCTEON select IRQ_CPU select IRQ_CPU_OCTEON select CPU_HAS_PREFETCH @@ -1314,6 +1315,9 @@ config SYS_HAS_CPU_RM9000 config SYS_HAS_CPU_SB1 bool +config SYS_HAS_CPU_CAVIUM_OCTEON + bool + # # CPU may reorder R->R, R->W, W->R, W->W # Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC @@ -1387,6 +1391,7 @@ config 32BIT config 64BIT bool "64-bit kernel" depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL + select HAVE_SYSCALL_WRAPPERS help Select this option if you want to build a 64-bit kernel. diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c index 6fd441d16af..f58d4ffb894 100644 --- a/arch/mips/alchemy/common/time.c +++ b/arch/mips/alchemy/common/time.c @@ -118,7 +118,7 @@ void __init plat_time_init(void) * setup counter 1 (RTC) to tick at full speed */ t = 0xffffff; - while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S) && t--) + while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S) && --t) asm volatile ("nop"); if (!t) goto cntr_err; @@ -127,7 +127,7 @@ void __init plat_time_init(void) au_sync(); t = 0xffffff; - while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && t--) + while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && --t) asm volatile ("nop"); if (!t) goto cntr_err; @@ -135,7 +135,7 @@ void __init plat_time_init(void) au_sync(); t = 0xffffff; - while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && t--) + while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && --t) asm volatile ("nop"); if (!t) goto cntr_err; diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h index ac5d541368e..6c5b40905dd 100644 --- a/arch/mips/include/asm/compat.h +++ b/arch/mips/include/asm/compat.h @@ -3,6 +3,8 @@ /* * Architecture specific compatibility types */ +#include <linux/seccomp.h> +#include <linux/thread_info.h> #include <linux/types.h> #include <asm/page.h> #include <asm/ptrace.h> @@ -218,4 +220,9 @@ struct compat_shmid64_ds { compat_ulong_t __unused2; }; +static inline int is_compat_task(void) +{ + return test_thread_flag(TIF_32BIT); +} + #endif /* _ASM_COMPAT_H */ diff --git a/arch/mips/include/asm/seccomp.h b/arch/mips/include/asm/seccomp.h index 36ed4407025..a6772e9507f 100644 --- a/arch/mips/include/asm/seccomp.h +++ b/arch/mips/include/asm/seccomp.h @@ -1,6 +1,5 @@ #ifndef __ASM_SECCOMP_H -#include <linux/thread_info.h> #include <linux/unistd.h> #define __NR_seccomp_read __NR_read diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c index a0ff2b66e22..4b4007b3083 100644 --- a/arch/mips/kernel/irq.c +++ b/arch/mips/kernel/irq.c @@ -111,7 +111,6 @@ int show_interrupts(struct seq_file *p, void *v) seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); #endif seq_printf(p, " %14s", irq_desc[i].chip->name); - seq_printf(p, "-%-8s", irq_desc[i].name); seq_printf(p, " %s", action->name); for (action=action->next; action; action = action->next) diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index aa2c55e3b55..2f8452b404c 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -32,6 +32,7 @@ #include <linux/module.h> #include <linux/binfmts.h> #include <linux/security.h> +#include <linux/syscalls.h> #include <linux/compat.h> #include <linux/vfs.h> #include <linux/ipc.h> @@ -63,9 +64,9 @@ #define merge_64(r1, r2) ((((r2) & 0xffffffffUL) << 32) + ((r1) & 0xffffffffUL)) #endif -asmlinkage unsigned long -sys32_mmap2(unsigned long addr, unsigned long len, unsigned long prot, - unsigned long flags, unsigned long fd, unsigned long pgoff) +SYSCALL_DEFINE6(32_mmap2, unsigned long, addr, unsigned long, len, + unsigned long, prot, unsigned long, flags, unsigned long, fd, + unsigned long, pgoff) { struct file * file = NULL; unsigned long error; @@ -121,21 +122,21 @@ struct rlimit32 { int rlim_max; }; -asmlinkage long sys32_truncate64(const char __user * path, - unsigned long __dummy, int a2, int a3) +SYSCALL_DEFINE4(32_truncate64, const char __user *, path, + unsigned long, __dummy, unsigned long, a2, unsigned long, a3) { return sys_truncate(path, merge_64(a2, a3)); } -asmlinkage long sys32_ftruncate64(unsigned int fd, unsigned long __dummy, - int a2, int a3) +SYSCALL_DEFINE4(32_ftruncate64, unsigned long, fd, unsigned long, __dummy, + unsigned long, a2, unsigned long, a3) { return sys_ftruncate(fd, merge_64(a2, a3)); } -asmlinkage int sys32_llseek(unsigned int fd, unsigned int offset_high, - unsigned int offset_low, loff_t __user * result, - unsigned int origin) +SYSCALL_DEFINE5(32_llseek, unsigned long, fd, unsigned long, offset_high, + unsigned long, offset_low, loff_t __user *, result, + unsigned long, origin) { return sys_llseek(fd, offset_high, offset_low, result, origin); } @@ -144,20 +145,20 @@ asmlinkage int sys32_llseek(unsigned int fd, unsigned int offset_high, lseek back to original location. They fail just like lseek does on non-seekable files. */ -asmlinkage ssize_t sys32_pread(unsigned int fd, char __user * buf, - size_t count, u32 unused, u64 a4, u64 a5) +SYSCALL_DEFINE6(32_pread, unsigned long, fd, char __user *, buf, size_t, count, + unsigned long, unused, unsigned long, a4, unsigned long, a5) { return sys_pread64(fd, buf, count, merge_64(a4, a5)); } -asmlinkage ssize_t sys32_pwrite(unsigned int fd, const char __user * buf, - size_t count, u32 unused, u64 a4, u64 a5) +SYSCALL_DEFINE6(32_pwrite, unsigned int, fd, const char __user *, buf, + size_t, count, u32, unused, u64, a4, u64, a5) { return sys_pwrite64(fd, buf, count, merge_64(a4, a5)); } -asmlinkage int sys32_sched_rr_get_interval(compat_pid_t pid, - struct compat_timespec __user *interval) +SYSCALL_DEFINE2(32_sched_rr_get_interval, compat_pid_t, pid, + struct compat_timespec __user *, interval) { struct timespec t; int ret; @@ -174,8 +175,8 @@ asmlinkage int sys32_sched_rr_get_interval(compat_pid_t pid, #ifdef CONFIG_SYSVIPC -asmlinkage long -sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth) +SYSCALL_DEFINE6(32_ipc, u32, call, long, first, long, second, long, third, + unsigned long, ptr, unsigned long, fifth) { int version, err; @@ -233,8 +234,8 @@ sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth) #else -asmlinkage long -sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth) +SYSCALL_DEFINE6(32_ipc, u32, call, int, first, int, second, int, third, + u32, ptr, u32 fifth) { return -ENOSYS; } @@ -242,7 +243,7 @@ sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth) #endif /* CONFIG_SYSVIPC */ #ifdef CONFIG_MIPS32_N32 -asmlinkage long sysn32_semctl(int semid, int semnum, int cmd, u32 arg) +SYSCALL_DEFINE4(n32_semctl, int, semid, int, semnum, int, cmd, u32, arg) { /* compat_sys_semctl expects a pointer to union semun */ u32 __user *uptr = compat_alloc_user_space(sizeof(u32)); @@ -251,13 +252,14 @@ asmlinkage long sysn32_semctl(int semid, int semnum, int cmd, u32 arg) return compat_sys_semctl(semid, semnum, cmd, uptr); } -asmlinkage long sysn32_msgsnd(int msqid, u32 msgp, unsigned msgsz, int msgflg) +SYSCALL_DEFINE4(n32_msgsnd, int, msqid, u32, msgp, unsigned int, msgsz, + int, msgflg) { return compat_sys_msgsnd(msqid, msgsz, msgflg, compat_ptr(msgp)); } -asmlinkage long sysn32_msgrcv(int msqid, u32 msgp, size_t msgsz, int msgtyp, - int msgflg) +SYSCALL_DEFINE5(n32_msgrcv, int, msqid, u32, msgp, size_t, msgsz, + int, msgtyp, int, msgflg) { return compat_sys_msgrcv(msqid, msgsz, msgtyp, msgflg, IPC_64, compat_ptr(msgp)); @@ -277,7 +279,7 @@ struct sysctl_args32 #ifdef CONFIG_SYSCTL_SYSCALL -asmlinkage long sys32_sysctl(struct sysctl_args32 __user *args) +SYSCALL_DEFINE1(32_sysctl, struct sysctl_args32 __user *, args) { struct sysctl_args32 tmp; int error; @@ -316,9 +318,16 @@ asmlinkage long sys32_sysctl(struct sysctl_args32 __user *args) return error; } +#else + +SYSCALL_DEFINE1(32_sysctl, struct sysctl_args32 __user *, args) +{ + return -ENOSYS; +} + #endif /* CONFIG_SYSCTL_SYSCALL */ -asmlinkage long sys32_newuname(struct new_utsname __user * name) +SYSCALL_DEFINE1(32_newuname, struct new_utsname __user *, name) { int ret = 0; @@ -334,7 +343,7 @@ asmlinkage long sys32_newuname(struct new_utsname __user * name) return ret; } -asmlinkage int sys32_personality(unsigned long personality) +SYSCALL_DEFINE1(32_personality, unsigned long, personality) { int ret; personality &= 0xffffffff; @@ -357,7 +366,7 @@ struct ustat32 { extern asmlinkage long sys_ustat(dev_t dev, struct ustat __user * ubuf); -asmlinkage int sys32_ustat(dev_t dev, struct ustat32 __user * ubuf32) +SYSCALL_DEFINE2(32_ustat, dev_t, dev, struct ustat32 __user *, ubuf32) { int err; struct ustat tmp; @@ -381,8 +390,8 @@ out: return err; } -asmlinkage int sys32_sendfile(int out_fd, int in_fd, compat_off_t __user *offset, - s32 count) +SYSCALL_DEFINE4(32_sendfile, long, out_fd, long, in_fd, + compat_off_t __user *, offset, s32, count) { mm_segment_t old_fs = get_fs(); int ret; diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 51d1ba415b9..9ab70c3b5be 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -399,7 +399,7 @@ einval: li v0, -ENOSYS sys sys_swapon 2 sys sys_reboot 3 sys sys_old_readdir 3 - sys old_mmap 6 /* 4090 */ + sys sys_mips_mmap 6 /* 4090 */ sys sys_munmap 2 sys sys_truncate 2 sys sys_ftruncate 2 @@ -519,7 +519,7 @@ einval: li v0, -ENOSYS sys sys_sendfile 4 sys sys_ni_syscall 0 sys sys_ni_syscall 0 - sys sys_mmap2 6 /* 4210 */ + sys sys_mips_mmap2 6 /* 4210 */ sys sys_truncate64 4 sys sys_ftruncate64 4 sys sys_stat64 2 diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index a9e17161899..9b469866715 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -207,7 +207,7 @@ sys_call_table: PTR sys_newlstat PTR sys_poll PTR sys_lseek - PTR old_mmap + PTR sys_mips_mmap PTR sys_mprotect /* 5010 */ PTR sys_munmap PTR sys_brk diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 30f3b6317a8..7438e92f8a0 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -129,12 +129,12 @@ EXPORT(sysn32_call_table) PTR sys_newlstat PTR sys_poll PTR sys_lseek - PTR old_mmap + PTR sys_mips_mmap PTR sys_mprotect /* 6010 */ PTR sys_munmap PTR sys_brk - PTR sys32_rt_sigaction - PTR sys32_rt_sigprocmask + PTR sys_32_rt_sigaction + PTR sys_32_rt_sigprocmask PTR compat_sys_ioctl /* 6015 */ PTR sys_pread64 PTR sys_pwrite64 @@ -159,7 +159,7 @@ EXPORT(sysn32_call_table) PTR compat_sys_setitimer PTR sys_alarm PTR sys_getpid - PTR sys32_sendfile + PTR sys_32_sendfile PTR sys_socket /* 6040 */ PTR sys_connect PTR sys_accept @@ -181,14 +181,14 @@ EXPORT(sysn32_call_table) PTR sys_exit PTR compat_sys_wait4 PTR sys_kill /* 6060 */ - PTR sys32_newuname + PTR sys_32_newuname PTR sys_semget PTR sys_semop - PTR sysn32_semctl + PTR sys_n32_semctl PTR sys_shmdt /* 6065 */ PTR sys_msgget - PTR sysn32_msgsnd - PTR sysn32_msgrcv + PTR sys_n32_msgsnd + PTR sys_n32_msgrcv PTR compat_sys_msgctl PTR compat_sys_fcntl /* 6070 */ PTR sys_flock @@ -245,15 +245,15 @@ EXPORT(sysn32_call_table) PTR sys_getsid PTR sys_capget PTR sys_capset - PTR sys32_rt_sigpending /* 6125 */ + PTR sys_32_rt_sigpending /* 6125 */ PTR compat_sys_rt_sigtimedwait - PTR sys32_rt_sigqueueinfo + PTR sys_32_rt_sigqueueinfo PTR sysn32_rt_sigsuspend PTR sys32_sigaltstack PTR compat_sys_utime /* 6130 */ PTR sys_mknod - PTR sys32_personality - PTR sys32_ustat + PTR sys_32_personality + PTR sys_32_ustat PTR compat_sys_statfs PTR compat_sys_fstatfs /* 6135 */ PTR sys_sysfs @@ -265,14 +265,14 @@ EXPORT(sysn32_call_table) PTR sys_sched_getscheduler PTR sys_sched_get_priority_max PTR sys_sched_get_priority_min - PTR sys32_sched_rr_get_interval /* 6145 */ + PTR sys_32_sched_rr_get_interval /* 6145 */ PTR sys_mlock PTR sys_munlock PTR sys_mlockall PTR sys_munlockall PTR sys_vhangup /* 6150 */ PTR sys_pivot_root - PTR sys32_sysctl + PTR sys_32_sysctl PTR sys_prctl PTR compat_sys_adjtimex PTR compat_sys_setrlimit /* 6155 */ diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index fefef4af859..b0fef4ff982 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -265,12 +265,12 @@ sys_call_table: PTR sys_olduname PTR sys_umask /* 4060 */ PTR sys_chroot - PTR sys32_ustat + PTR sys_32_ustat PTR sys_dup2 PTR sys_getppid PTR sys_getpgrp /* 4065 */ PTR sys_setsid - PTR sys32_sigaction + PTR sys_32_sigaction PTR sys_sgetmask PTR sys_ssetmask PTR sys_setreuid /* 4070 */ @@ -293,7 +293,7 @@ sys_call_table: PTR sys_swapon PTR sys_reboot PTR compat_sys_old_readdir - PTR old_mmap /* 4090 */ + PTR sys_mips_mmap /* 4090 */ PTR sys_munmap PTR sys_truncate PTR sys_ftruncate @@ -320,12 +320,12 @@ sys_call_table: PTR compat_sys_wait4 PTR sys_swapoff /* 4115 */ PTR compat_sys_sysinfo - PTR sys32_ipc + PTR sys_32_ipc PTR sys_fsync PTR sys32_sigreturn PTR sys32_clone /* 4120 */ PTR sys_setdomainname - PTR sys32_newuname + PTR sys_32_newuname PTR sys_ni_syscall /* sys_modify_ldt */ PTR compat_sys_adjtimex PTR sys_mprotect /* 4125 */ @@ -339,11 +339,11 @@ sys_call_table: PTR sys_fchdir PTR sys_bdflush PTR sys_sysfs /* 4135 */ - PTR sys32_personality + PTR sys_32_personality PTR sys_ni_syscall /* for afs_syscall */ PTR sys_setfsuid PTR sys_setfsgid - PTR sys32_llseek /* 4140 */ + PTR sys_32_llseek /* 4140 */ PTR compat_sys_getdents PTR compat_sys_select PTR sys_flock @@ -356,7 +356,7 @@ sys_call_table: PTR sys_ni_syscall /* 4150 */ PTR sys_getsid PTR sys_fdatasync - PTR sys32_sysctl + PTR sys_32_sysctl PTR sys_mlock PTR sys_munlock /* 4155 */ PTR sys_mlockall @@ -368,7 +368,7 @@ sys_call_table: PTR sys_sched_yield PTR sys_sched_get_priority_max PTR sys_sched_get_priority_min - PTR sys32_sched_rr_get_interval /* 4165 */ + PTR sys_32_sched_rr_get_interval /* 4165 */ PTR compat_sys_nanosleep PTR sys_mremap PTR sys_accept @@ -397,25 +397,25 @@ sys_call_table: PTR sys_getresgid PTR sys_prctl PTR sys32_rt_sigreturn - PTR sys32_rt_sigaction - PTR sys32_rt_sigprocmask /* 4195 */ - PTR sys32_rt_sigpending + PTR sys_32_rt_sigaction + PTR sys_32_rt_sigprocmask /* 4195 */ + PTR sys_32_rt_sigpending PTR compat_sys_rt_sigtimedwait - PTR sys32_rt_sigqueueinfo + PTR sys_32_rt_sigqueueinfo PTR sys32_rt_sigsuspend - PTR sys32_pread /* 4200 */ - PTR sys32_pwrite + PTR sys_32_pread /* 4200 */ + PTR sys_32_pwrite PTR sys_chown PTR sys_getcwd PTR sys_capget PTR sys_capset /* 4205 */ PTR sys32_sigaltstack - PTR sys32_sendfile + PTR sys_32_sendfile PTR sys_ni_syscall PTR sys_ni_syscall - PTR sys32_mmap2 /* 4210 */ - PTR sys32_truncate64 - PTR sys32_ftruncate64 + PTR sys_mips_mmap2 /* 4210 */ + PTR sys_32_truncate64 + PTR sys_32_ftruncate64 PTR sys_newstat PTR sys_newlstat PTR sys_newfstat /* 4215 */ @@ -481,7 +481,7 @@ sys_call_table: PTR compat_sys_mq_notify /* 4275 */ PTR compat_sys_mq_getsetattr PTR sys_ni_syscall /* sys_vserver */ - PTR sys32_waitid + PTR sys_32_waitid PTR sys_ni_syscall /* available, was setaltroot */ PTR sys_add_key /* 4280 */ PTR sys_request_key diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index a4e106c56ab..830c5ef9932 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -19,6 +19,7 @@ #include <linux/ptrace.h> #include <linux/unistd.h> #include <linux/compiler.h> +#include <linux/syscalls.h> #include <linux/uaccess.h> #include <asm/abi.h> @@ -338,8 +339,8 @@ asmlinkage int sys_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) } #ifdef CONFIG_TRAD_SIGNALS -asmlinkage int sys_sigaction(int sig, const struct sigaction __user *act, - struct sigaction __user *oact) +SYSCALL_DEFINE3(sigaction, int, sig, const struct sigaction __user *, act, + struct sigaction __user *, oact) { struct k_sigaction new_ka, old_ka; int ret; diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index 652709b353a..2e74075ac0c 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -349,8 +349,8 @@ asmlinkage int sys32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) return -ERESTARTNOHAND; } -asmlinkage int sys32_sigaction(int sig, const struct sigaction32 __user *act, - struct sigaction32 __user *oact) +SYSCALL_DEFINE3(32_sigaction, long, sig, const struct sigaction32 __user *, act, + struct sigaction32 __user *, oact) { struct k_sigaction new_ka, old_ka; int ret; @@ -704,9 +704,9 @@ struct mips_abi mips_abi_32 = { .restart = __NR_O32_restart_syscall }; -asmlinkage int sys32_rt_sigaction(int sig, const struct sigaction32 __user *act, - struct sigaction32 __user *oact, - unsigned int sigsetsize) +SYSCALL_DEFINE4(32_rt_sigaction, int, sig, + const struct sigaction32 __user *, act, + struct sigaction32 __user *, oact, unsigned int, sigsetsize) { struct k_sigaction new_sa, old_sa; int ret = -EINVAL; @@ -748,8 +748,8 @@ out: return ret; } -asmlinkage int sys32_rt_sigprocmask(int how, compat_sigset_t __user *set, - compat_sigset_t __user *oset, unsigned int sigsetsize) +SYSCALL_DEFINE4(32_rt_sigprocmask, int, how, compat_sigset_t __user *, set, + compat_sigset_t __user *, oset, unsigned int, sigsetsize) { sigset_t old_set, new_set; int ret; @@ -770,8 +770,8 @@ asmlinkage int sys32_rt_sigprocmask(int how, compat_sigset_t __user *set, return ret; } -asmlinkage int sys32_rt_sigpending(compat_sigset_t __user *uset, - unsigned int sigsetsize) +SYSCALL_DEFINE2(32_rt_sigpending, compat_sigset_t __user *, uset, + unsigned int, sigsetsize) { int ret; sigset_t set; @@ -787,7 +787,8 @@ asmlinkage int sys32_rt_sigpending(compat_sigset_t __user *uset, return ret; } -asmlinkage int sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t __user *uinfo) +SYSCALL_DEFINE3(32_rt_sigqueueinfo, int, pid, int, sig, + compat_siginfo_t __user *, uinfo) { siginfo_t info; int ret; @@ -802,10 +803,9 @@ asmlinkage int sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t __user * return ret; } -asmlinkage long -sys32_waitid(int which, compat_pid_t pid, - compat_siginfo_t __user *uinfo, int options, - struct compat_rusage __user *uru) +SYSCALL_DEFINE5(32_waitid, int, which, compat_pid_t, pid, + compat_siginfo_t __user *, uinfo, int, options, + struct compat_rusage __user *, uru) { siginfo_t info; struct rusage ru; diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c index 37970d9b218..8cf38464404 100644 --- a/arch/mips/kernel/syscall.c +++ b/arch/mips/kernel/syscall.c @@ -152,9 +152,9 @@ out: return error; } -asmlinkage unsigned long -old_mmap(unsigned long addr, unsigned long len, int prot, - int flags, int fd, off_t offset) +SYSCALL_DEFINE6(mips_mmap, unsigned long, addr, unsigned long, len, + unsigned long, prot, unsigned long, flags, unsigned long, + fd, off_t, offset) { unsigned long result; @@ -168,9 +168,9 @@ out: return result; } -asmlinkage unsigned long -sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot, - unsigned long flags, unsigned long fd, unsigned long pgoff) +SYSCALL_DEFINE6(mips_mmap2, unsigned long, addr, unsigned long, len, + unsigned long, prot, unsigned long, flags, unsigned long, fd, + unsigned long, pgoff) { if (pgoff & (~PAGE_MASK >> 12)) return -EINVAL; @@ -240,7 +240,7 @@ out: /* * Compacrapability ... */ -asmlinkage int sys_uname(struct old_utsname __user * name) +SYSCALL_DEFINE1(uname, struct old_utsname __user *, name) { if (name && !copy_to_user(name, utsname(), sizeof (*name))) return 0; @@ -250,7 +250,7 @@ asmlinkage int sys_uname(struct old_utsname __user * name) /* * Compacrapability ... */ -asmlinkage int sys_olduname(struct oldold_utsname __user * name) +SYSCALL_DEFINE1(olduname, struct oldold_utsname __user *, name) { int error; @@ -279,7 +279,7 @@ asmlinkage int sys_olduname(struct oldold_utsname __user * name) return error; } -asmlinkage int sys_set_thread_area(unsigned long addr) +SYSCALL_DEFINE1(set_thread_area, unsigned long, addr) { struct thread_info *ti = task_thread_info(current); @@ -290,7 +290,7 @@ asmlinkage int sys_set_thread_area(unsigned long addr) return 0; } -asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3) +asmlinkage int _sys_sysmips(long cmd, long arg1, long arg2, long arg3) { switch (cmd) { case MIPS_ATOMIC_SET: @@ -325,8 +325,8 @@ asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3) * * This is really horribly ugly. */ -asmlinkage int sys_ipc(unsigned int call, int first, int second, - unsigned long third, void __user *ptr, long fifth) +SYSCALL_DEFINE6(ipc, unsigned int, call, int, first, int, second, + unsigned long, third, void __user *, ptr, long, fifth) { int version, ret; @@ -411,7 +411,7 @@ asmlinkage int sys_ipc(unsigned int call, int first, int second, /* * No implemented yet ... */ -asmlinkage int sys_cachectl(char *addr, int nbytes, int op) +SYSCALL_DEFINE3(cachectl, char *, addr, int, nbytes, int, op) { return -ENOSYS; } diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c index 98ad0a82c29..694d51f523d 100644 --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c @@ -13,6 +13,7 @@ #include <linux/linkage.h> #include <linux/module.h> #include <linux/sched.h> +#include <linux/syscalls.h> #include <linux/mm.h> #include <asm/cacheflush.h> @@ -58,8 +59,8 @@ EXPORT_SYMBOL(_dma_cache_wback_inv); * We could optimize the case where the cache argument is not BCACHE but * that seems very atypical use ... */ -asmlinkage int sys_cacheflush(unsigned long addr, - unsigned long bytes, unsigned int cache) +SYSCALL_DEFINE3(cacheflush, unsigned long, addr, unsigned long, bytes, + unsigned int, cache) { if (bytes == 0) return 0; diff --git a/arch/powerpc/include/asm/compat.h b/arch/powerpc/include/asm/compat.h index d811a8cd7b5..4774c2f9223 100644 --- a/arch/powerpc/include/asm/compat.h +++ b/arch/powerpc/include/asm/compat.h @@ -210,5 +210,10 @@ struct compat_shmid64_ds { compat_ulong_t __unused6; }; +static inline int is_compat_task(void) +{ + return test_thread_flag(TIF_32BIT); +} + #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_COMPAT_H */ diff --git a/arch/powerpc/include/asm/seccomp.h b/arch/powerpc/include/asm/seccomp.h index 853765eb1f6..00c1d9133cf 100644 --- a/arch/powerpc/include/asm/seccomp.h +++ b/arch/powerpc/include/asm/seccomp.h @@ -1,10 +1,6 @@ #ifndef _ASM_POWERPC_SECCOMP_H #define _ASM_POWERPC_SECCOMP_H -#ifdef __KERNEL__ -#include <linux/thread_info.h> -#endif - #include <linux/unistd.h> #define __NR_seccomp_read __NR_read diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c index ada06924a42..73cb6a3229a 100644 --- a/arch/powerpc/kernel/align.c +++ b/arch/powerpc/kernel/align.c @@ -367,27 +367,24 @@ static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr, static int emulate_fp_pair(unsigned char __user *addr, unsigned int reg, unsigned int flags) { - char *ptr = (char *) ¤t->thread.TS_FPR(reg); - int i, ret; + char *ptr0 = (char *) ¤t->thread.TS_FPR(reg); + char *ptr1 = (char *) ¤t->thread.TS_FPR(reg+1); + int i, ret, sw = 0; if (!(flags & F)) return 0; if (reg & 1) return 0; /* invalid form: FRS/FRT must be even */ - if (!(flags & SW)) { - /* not byte-swapped - easy */ - if (!(flags & ST)) - ret = __copy_from_user(ptr, addr, 16); - else - ret = __copy_to_user(addr, ptr, 16); - } else { - /* each FPR value is byte-swapped separately */ - ret = 0; - for (i = 0; i < 16; ++i) { - if (!(flags & ST)) - ret |= __get_user(ptr[i^7], addr + i); - else - ret |= __put_user(ptr[i^7], addr + i); + if (flags & SW) + sw = 7; + ret = 0; + for (i = 0; i < 8; ++i) { + if (!(flags & ST)) { + ret |= __get_user(ptr0[i^sw], addr + i); + ret |= __get_user(ptr1[i^sw], addr + i + 8); + } else { + ret |= __put_user(ptr0[i^sw], addr + i); + ret |= __put_user(ptr1[i^sw], addr + i + 8); } } if (ret) diff --git a/arch/powerpc/lib/copyuser_64.S b/arch/powerpc/lib/copyuser_64.S index 70693a5c12a..693b14a778f 100644 --- a/arch/powerpc/lib/copyuser_64.S +++ b/arch/powerpc/lib/copyuser_64.S @@ -62,18 +62,19 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) 72: std r8,8(r3) beq+ 3f addi r3,r3,16 -23: ld r9,8(r4) .Ldo_tail: bf cr7*4+1,1f - rotldi r9,r9,32 +23: lwz r9,8(r4) + addi r4,r4,4 73: stw r9,0(r3) addi r3,r3,4 1: bf cr7*4+2,2f - rotldi r9,r9,16 +44: lhz r9,8(r4) + addi r4,r4,2 74: sth r9,0(r3) addi r3,r3,2 2: bf cr7*4+3,3f - rotldi r9,r9,8 +45: lbz r9,8(r4) 75: stb r9,0(r3) 3: li r3,0 blr @@ -141,11 +142,24 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) 6: cmpwi cr1,r5,8 addi r3,r3,32 sld r9,r9,r10 - ble cr1,.Ldo_tail + ble cr1,7f 34: ld r0,8(r4) srd r7,r0,r11 or r9,r7,r9 - b .Ldo_tail +7: + bf cr7*4+1,1f + rotldi r9,r9,32 +94: stw r9,0(r3) + addi r3,r3,4 +1: bf cr7*4+2,2f + rotldi r9,r9,16 +95: sth r9,0(r3) + addi r3,r3,2 +2: bf cr7*4+3,3f + rotldi r9,r9,8 +96: stb r9,0(r3) +3: li r3,0 + blr .Ldst_unaligned: PPC_MTOCRF 0x01,r6 /* put #bytes to 8B bdry into cr7 */ @@ -218,7 +232,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) 121: 132: addi r3,r3,8 -123: 134: 135: 138: @@ -226,6 +239,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) 140: 141: 142: +123: +144: +145: /* * here we have had a fault on a load and r3 points to the first @@ -309,6 +325,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) 187: 188: 189: +194: +195: +196: 1: ld r6,-24(r1) ld r5,-8(r1) @@ -329,7 +348,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) .llong 72b,172b .llong 23b,123b .llong 73b,173b + .llong 44b,144b .llong 74b,174b + .llong 45b,145b .llong 75b,175b .llong 24b,124b .llong 25b,125b @@ -347,6 +368,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) .llong 79b,179b .llong 80b,180b .llong 34b,134b + .llong 94b,194b + .llong 95b,195b + .llong 96b,196b .llong 35b,135b .llong 81b,181b .llong 36b,136b diff --git a/arch/powerpc/lib/memcpy_64.S b/arch/powerpc/lib/memcpy_64.S index fe2d34e5332..e178922b2c2 100644 --- a/arch/powerpc/lib/memcpy_64.S +++ b/arch/powerpc/lib/memcpy_64.S @@ -53,18 +53,19 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) 3: std r8,8(r3) beq 3f addi r3,r3,16 - ld r9,8(r4) .Ldo_tail: bf cr7*4+1,1f - rotldi r9,r9,32 + lwz r9,8(r4) + addi r4,r4,4 stw r9,0(r3) addi r3,r3,4 1: bf cr7*4+2,2f - rotldi r9,r9,16 + lhz r9,8(r4) + addi r4,r4,2 sth r9,0(r3) addi r3,r3,2 2: bf cr7*4+3,3f - rotldi r9,r9,8 + lbz r9,8(r4) stb r9,0(r3) 3: ld r3,48(r1) /* return dest pointer */ blr @@ -133,11 +134,24 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) cmpwi cr1,r5,8 addi r3,r3,32 sld r9,r9,r10 - ble cr1,.Ldo_tail + ble cr1,6f ld r0,8(r4) srd r7,r0,r11 or r9,r7,r9 - b .Ldo_tail +6: + bf cr7*4+1,1f + rotldi r9,r9,32 + stw r9,0(r3) + addi r3,r3,4 +1: bf cr7*4+2,2f + rotldi r9,r9,16 + sth r9,0(r3) + addi r3,r3,2 +2: bf cr7*4+3,3f + rotldi r9,r9,8 + stb r9,0(r3) +3: ld r3,48(r1) /* return dest pointer */ + blr .Ldst_unaligned: PPC_MTOCRF 0x01,r6 # put #bytes to 8B bdry into cr7 diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c index fb371f5ce13..d6b772ba3b8 100644 --- a/arch/powerpc/platforms/86xx/gef_sbc610.c +++ b/arch/powerpc/platforms/86xx/gef_sbc610.c @@ -142,6 +142,10 @@ static void __init gef_sbc610_nec_fixup(struct pci_dev *pdev) { unsigned int val; + /* Do not do the fixup on other platforms! */ + if (!machine_is(gef_sbc610)) + return; + printk(KERN_INFO "Running NEC uPD720101 Fixup\n"); /* Ensure ports 1, 2, 3, 4 & 5 are enabled */ diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c index 77fae5f64f2..5558d932b4d 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.c +++ b/arch/powerpc/sysdev/ppc4xx_pci.c @@ -204,6 +204,23 @@ static int __init ppc4xx_setup_one_pci_PMM(struct pci_controller *hose, { u32 ma, pcila, pciha; + /* Hack warning ! The "old" PCI 2.x cell only let us configure the low + * 32-bit of incoming PLB addresses. The top 4 bits of the 36-bit + * address are actually hard wired to a value that appears to depend + * on the specific SoC. For example, it's 0 on 440EP and 1 on 440EPx. + * + * The trick here is we just crop those top bits and ignore them when + * programming the chip. That means the device-tree has to be right + * for the specific part used (we don't print a warning if it's wrong + * but on the other hand, you'll crash quickly enough), but at least + * this code should work whatever the hard coded value is + */ + plb_addr &= 0xffffffffull; + + /* Note: Due to the above hack, the test below doesn't actually test + * if you address is above 4G, but it tests that address and + * (address + size) are both contained in the same 4G + */ if ((plb_addr + size) > 0xffffffffull || !is_power_of_2(size) || size < 0x1000 || (plb_addr & (size - 1)) != 0) { printk(KERN_WARNING "%s: Resource out of range\n", diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c index c42cd898f68..6118890c946 100644 --- a/arch/s390/crypto/aes_s390.c +++ b/arch/s390/crypto/aes_s390.c @@ -556,7 +556,7 @@ static void __exit aes_s390_fini(void) module_init(aes_s390_init); module_exit(aes_s390_fini); -MODULE_ALIAS("aes"); +MODULE_ALIAS("aes-all"); MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm"); MODULE_LICENSE("GPL"); diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c index 7c35787d29b..72da416f616 100644 --- a/arch/sh/boards/board-ap325rxa.c +++ b/arch/sh/boards/board-ap325rxa.c @@ -22,7 +22,6 @@ #include <linux/gpio.h> #include <linux/spi/spi.h> #include <linux/spi/spi_gpio.h> -#include <media/ov772x.h> #include <media/soc_camera_platform.h> #include <media/sh_mobile_ceu.h> #include <video/sh_mobile_lcdc.h> @@ -224,7 +223,6 @@ static void camera_power(int val) } #ifdef CONFIG_I2C -/* support for the old ncm03j camera */ static unsigned char camera_ncm03j_magic[] = { 0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8, @@ -245,23 +243,6 @@ static unsigned char camera_ncm03j_magic[] = 0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F, }; -static int camera_probe(void) -{ - struct i2c_adapter *a = i2c_get_adapter(0); - struct i2c_msg msg; - int ret; - - camera_power(1); - msg.addr = 0x6e; - msg.buf = camera_ncm03j_magic; - msg.len = 2; - msg.flags = 0; - ret = i2c_transfer(a, &msg, 1); - camera_power(0); - - return ret; -} - static int camera_set_capture(struct soc_camera_platform_info *info, int enable) { @@ -313,35 +294,8 @@ static struct platform_device camera_device = { .platform_data = &camera_info, }, }; - -static int __init camera_setup(void) -{ - if (camera_probe() > 0) - platform_device_register(&camera_device); - - return 0; -} -late_initcall(camera_setup); - #endif /* CONFIG_I2C */ -static int ov7725_power(struct device *dev, int mode) -{ - camera_power(0); - if (mode) - camera_power(1); - - return 0; -} - -static struct ov772x_camera_info ov7725_info = { - .buswidth = SOCAM_DATAWIDTH_8, - .flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP, - .link = { - .power = ov7725_power, - }, -}; - static struct sh_mobile_ceu_info sh_mobile_ceu_info = { .flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8, @@ -392,6 +346,9 @@ static struct platform_device *ap325rxa_devices[] __initdata = { &ap325rxa_nor_flash_device, &lcdc_device, &ceu_device, +#ifdef CONFIG_I2C + &camera_device, +#endif &nand_flash_device, &sdcard_cn3_device, }; @@ -400,10 +357,6 @@ static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = { { I2C_BOARD_INFO("pcf8563", 0x51), }, - { - I2C_BOARD_INFO("ov772x", 0x21), - .platform_data = &ov7725_info, - }, }; static struct spi_board_info ap325rxa_spi_devices[] = { diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c index 020a96fe961..4a5e5973233 100644 --- a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c +++ b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c @@ -18,8 +18,8 @@ #include <asm/freq.h> #include <asm/io.h> -const static int pll1rate[]={1,2,3,4,6,8}; -const static int pfc_divisors[]={1,2,3,4,6,8,12}; +static const int pll1rate[]={1,2,3,4,6,8}; +static const int pfc_divisors[]={1,2,3,4,6,8,12}; #define ifc_divisors pfc_divisors #if (CONFIG_SH_CLK_MD == 0) diff --git a/arch/sparc/include/asm/compat.h b/arch/sparc/include/asm/compat.h index f260b58f5ce..0e706257918 100644 --- a/arch/sparc/include/asm/compat.h +++ b/arch/sparc/include/asm/compat.h @@ -240,4 +240,9 @@ struct compat_shmid64_ds { unsigned int __unused2; }; +static inline int is_compat_task(void) +{ + return test_thread_flag(TIF_32BIT); +} + #endif /* _ASM_SPARC64_COMPAT_H */ diff --git a/arch/sparc/include/asm/seccomp.h b/arch/sparc/include/asm/seccomp.h index 7fcd9968192..adca1bce41d 100644 --- a/arch/sparc/include/asm/seccomp.h +++ b/arch/sparc/include/asm/seccomp.h @@ -1,11 +1,5 @@ #ifndef _ASM_SECCOMP_H -#include <linux/thread_info.h> /* already defines TIF_32BIT */ - -#ifndef TIF_32BIT -#error "unexpected TIF_32BIT on sparc64" -#endif - #include <linux/unistd.h> #define __NR_seccomp_read __NR_read diff --git a/arch/sparc/kernel/chmc.c b/arch/sparc/kernel/chmc.c index 3b9f4d6e14a..e1a9598e2a4 100644 --- a/arch/sparc/kernel/chmc.c +++ b/arch/sparc/kernel/chmc.c @@ -306,6 +306,7 @@ static int jbusmc_print_dimm(int syndrome_code, buf[1] = '?'; buf[2] = '?'; buf[3] = '\0'; + return 0; } p = dp->controller; prop = &p->layout; diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 9c39095b33f..bc2fbadff9f 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1803,7 +1803,7 @@ config DMAR remapping devices. config DMAR_DEFAULT_ON - def_bool n + def_bool y prompt "Enable DMA Remapping Devices by default" depends on DMAR help diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h index ca5ffb2856b..edc90f23e70 100644 --- a/arch/x86/include/asm/efi.h +++ b/arch/x86/include/asm/efi.h @@ -37,8 +37,6 @@ extern unsigned long asmlinkage efi_call_phys(void *, ...); #else /* !CONFIG_X86_32 */ -#define MAX_EFI_IO_PAGES 100 - extern u64 efi_call0(void *fp); extern u64 efi_call1(void *fp, u64 arg1); extern u64 efi_call2(void *fp, u64 arg1, u64 arg2); diff --git a/arch/x86/include/asm/fixmap_64.h b/arch/x86/include/asm/fixmap_64.h index 00a30ab9b1a..8be740977db 100644 --- a/arch/x86/include/asm/fixmap_64.h +++ b/arch/x86/include/asm/fixmap_64.h @@ -16,7 +16,6 @@ #include <asm/apicdef.h> #include <asm/page.h> #include <asm/vsyscall.h> -#include <asm/efi.h> /* * Here we define all the compile-time 'special' virtual @@ -43,9 +42,6 @@ enum fixed_addresses { FIX_APIC_BASE, /* local (CPU) APIC) -- required for SMP or not */ FIX_IO_APIC_BASE_0, FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS - 1, - FIX_EFI_IO_MAP_LAST_PAGE, - FIX_EFI_IO_MAP_FIRST_PAGE = FIX_EFI_IO_MAP_LAST_PAGE - + MAX_EFI_IO_PAGES - 1, #ifdef CONFIG_PARAVIRT FIX_PARAVIRT_BOOTMAP, #endif diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h index 48f0004db8c..71c9e518398 100644 --- a/arch/x86/include/asm/i387.h +++ b/arch/x86/include/asm/i387.h @@ -172,7 +172,13 @@ static inline void __save_init_fpu(struct task_struct *tsk) #else /* CONFIG_X86_32 */ -extern void finit(void); +#ifdef CONFIG_MATH_EMULATION +extern void finit_task(struct task_struct *tsk); +#else +static inline void finit_task(struct task_struct *tsk) +{ +} +#endif static inline void tolerant_fwait(void) { diff --git a/arch/x86/include/asm/iomap.h b/arch/x86/include/asm/iomap.h index c1f06289b14..86af26091d6 100644 --- a/arch/x86/include/asm/iomap.h +++ b/arch/x86/include/asm/iomap.h @@ -23,6 +23,9 @@ #include <asm/pgtable.h> #include <asm/tlbflush.h> +int +is_io_mapping_possible(resource_size_t base, unsigned long size); + void * iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot); diff --git a/arch/x86/include/asm/seccomp_32.h b/arch/x86/include/asm/seccomp_32.h index a6ad87b352c..b811d6f5780 100644 --- a/arch/x86/include/asm/seccomp_32.h +++ b/arch/x86/include/asm/seccomp_32.h @@ -1,12 +1,6 @@ #ifndef _ASM_X86_SECCOMP_32_H #define _ASM_X86_SECCOMP_32_H -#include <linux/thread_info.h> - -#ifdef TIF_32BIT -#error "unexpected TIF_32BIT on i386" -#endif - #include <linux/unistd.h> #define __NR_seccomp_read __NR_read diff --git a/arch/x86/include/asm/seccomp_64.h b/arch/x86/include/asm/seccomp_64.h index 4171bb794e9..84ec1bd161a 100644 --- a/arch/x86/include/asm/seccomp_64.h +++ b/arch/x86/include/asm/seccomp_64.h @@ -1,14 +1,6 @@ #ifndef _ASM_X86_SECCOMP_64_H #define _ASM_X86_SECCOMP_64_H -#include <linux/thread_info.h> - -#ifdef TIF_32BIT -#error "unexpected TIF_32BIT on x86_64" -#else -#define TIF_32BIT TIF_IA32 -#endif - #include <linux/unistd.h> #include <asm/ia32_unistd.h> diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c index 169a120587b..87b67e3a765 100644 --- a/arch/x86/kernel/ds.c +++ b/arch/x86/kernel/ds.c @@ -729,7 +729,7 @@ struct pebs_tracer *ds_request_pebs(struct task_struct *task, spin_unlock_irqrestore(&ds_lock, irq); - ds_write_config(tracer->ds.context, &tracer->trace.ds, ds_bts); + ds_write_config(tracer->ds.context, &tracer->trace.ds, ds_pebs); ds_resume_pebs(tracer); return tracer; @@ -1029,5 +1029,4 @@ void ds_copy_thread(struct task_struct *tsk, struct task_struct *father) void ds_exit_thread(struct task_struct *tsk) { - WARN_ON(tsk->thread.ds_ctx); } diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c index 1119d247fe1..eb1ef3b67dd 100644 --- a/arch/x86/kernel/efi.c +++ b/arch/x86/kernel/efi.c @@ -467,7 +467,7 @@ void __init efi_enter_virtual_mode(void) efi_memory_desc_t *md; efi_status_t status; unsigned long size; - u64 end, systab, addr, npages; + u64 end, systab, addr, npages, end_pfn; void *p, *va; efi.systab = NULL; @@ -479,7 +479,10 @@ void __init efi_enter_virtual_mode(void) size = md->num_pages << EFI_PAGE_SHIFT; end = md->phys_addr + size; - if (PFN_UP(end) <= max_low_pfn_mapped) + end_pfn = PFN_UP(end); + if (end_pfn <= max_low_pfn_mapped + || (end_pfn > (1UL << (32 - PAGE_SHIFT)) + && end_pfn <= max_pfn_mapped)) va = __va(md->phys_addr); else va = efi_ioremap(md->phys_addr, size); diff --git a/arch/x86/kernel/efi_64.c b/arch/x86/kernel/efi_64.c index 652c5287215..cb783b92c50 100644 --- a/arch/x86/kernel/efi_64.c +++ b/arch/x86/kernel/efi_64.c @@ -99,24 +99,11 @@ void __init efi_call_phys_epilog(void) void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size) { - static unsigned pages_mapped __initdata; - unsigned i, pages; - unsigned long offset; + unsigned long last_map_pfn; - pages = PFN_UP(phys_addr + size) - PFN_DOWN(phys_addr); - offset = phys_addr & ~PAGE_MASK; - phys_addr &= PAGE_MASK; - - if (pages_mapped + pages > MAX_EFI_IO_PAGES) + last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size); + if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size) return NULL; - for (i = 0; i < pages; i++) { - __set_fixmap(FIX_EFI_IO_MAP_FIRST_PAGE - pages_mapped, - phys_addr, PAGE_KERNEL); - phys_addr += PAGE_SIZE; - pages_mapped++; - } - - return (void __iomem *)__fix_to_virt(FIX_EFI_IO_MAP_FIRST_PAGE - \ - (pages_mapped - pages)) + offset; + return (void __iomem *)__va(phys_addr); } diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c index b0f61f0dcd0..f2f8540a7f3 100644 --- a/arch/x86/kernel/i387.c +++ b/arch/x86/kernel/i387.c @@ -136,7 +136,7 @@ int init_fpu(struct task_struct *tsk) #ifdef CONFIG_X86_32 if (!HAVE_HWFP) { memset(tsk->thread.xstate, 0, xstate_size); - finit(); + finit_task(tsk); set_stopped_child_used_math(tsk); return 0; } diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index 5a4c23d8989..06ca07f6ad8 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -1388,7 +1388,7 @@ void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, #ifdef CONFIG_X86_32 # define IS_IA32 1 #elif defined CONFIG_IA32_EMULATION -# define IS_IA32 test_thread_flag(TIF_IA32) +# define IS_IA32 is_compat_task() #else # define IS_IA32 0 #endif diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 2b46eb41643..4526b3a75ed 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -217,6 +217,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq"), }, }, + { /* Handle problems with rebooting on Dell XPS710 */ + .callback = set_bios_reboot, + .ident = "Dell XPS710", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Dell XPS710"), + }, + }, { } }; diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index c461f6d6907..6a8811a6932 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -770,6 +770,9 @@ void __init setup_arch(char **cmdline_p) finish_e820_parsing(); + if (efi_enabled) + efi_init(); + dmi_scan_machine(); dmi_check_system(bad_bios_dmi_table); @@ -789,8 +792,6 @@ void __init setup_arch(char **cmdline_p) insert_resource(&iomem_resource, &data_resource); insert_resource(&iomem_resource, &bss_resource); - if (efi_enabled) - efi_init(); #ifdef CONFIG_X86_32 if (ppro_with_ram_bug()) { diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index 92f1c6f3e19..960a8d9c049 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -343,6 +343,11 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx, * flush_tlb_user() for both user and kernel mappings unless * the Page Global Enable (PGE) feature bit is set. */ *dx |= 0x00002000; + /* We also lie, and say we're family id 5. 6 or greater + * leads to a rdmsr in early_init_intel which we can't handle. + * Family ID is returned as bits 8-12 in ax. */ + *ax &= 0xFFFFF0FF; + *ax |= 0x00000500; break; case 0x80000000: /* Futureproof this a little: if they ask how much extended @@ -589,19 +594,21 @@ static void __init lguest_init_IRQ(void) /* Some systems map "vectors" to interrupts weirdly. Lguest has * a straightforward 1 to 1 mapping, so force that here. */ __get_cpu_var(vector_irq)[vector] = i; - if (vector != SYSCALL_VECTOR) { - set_intr_gate(vector, - interrupt[vector-FIRST_EXTERNAL_VECTOR]); - set_irq_chip_and_handler_name(i, &lguest_irq_controller, - handle_level_irq, - "level"); - } + if (vector != SYSCALL_VECTOR) + set_intr_gate(vector, interrupt[i]); } /* This call is required to set up for 4k stacks, where we have * separate stacks for hard and soft interrupts. */ irq_ctx_init(smp_processor_id()); } +void lguest_setup_irq(unsigned int irq) +{ + irq_to_desc_alloc_cpu(irq, 0); + set_irq_chip_and_handler_name(irq, &lguest_irq_controller, + handle_level_irq, "level"); +} + /* * Time. * diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c index 7ffcdeec463..b9cc84a2a4f 100644 --- a/arch/x86/mach-voyager/voyager_smp.c +++ b/arch/x86/mach-voyager/voyager_smp.c @@ -65,7 +65,7 @@ static volatile unsigned long smp_invalidate_needed; /* Bitmask of CPUs present in the system - exported by i386_syms.c, used * by scheduler but indexed physically */ -cpumask_t phys_cpu_present_map = CPU_MASK_NONE; +static cpumask_t voyager_phys_cpu_present_map = CPU_MASK_NONE; /* The internal functions */ static void send_CPI(__u32 cpuset, __u8 cpi); @@ -366,19 +366,19 @@ void __init find_smp_config(void) /* set up everything for just this CPU, we can alter * this as we start the other CPUs later */ /* now get the CPU disposition from the extended CMOS */ - cpus_addr(phys_cpu_present_map)[0] = + cpus_addr(voyager_phys_cpu_present_map)[0] = voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK); - cpus_addr(phys_cpu_present_map)[0] |= + cpus_addr(voyager_phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 1) << 8; - cpus_addr(phys_cpu_present_map)[0] |= + cpus_addr(voyager_phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 2) << 16; - cpus_addr(phys_cpu_present_map)[0] |= + cpus_addr(voyager_phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 3) << 24; - init_cpu_possible(&phys_cpu_present_map); - printk("VOYAGER SMP: phys_cpu_present_map = 0x%lx\n", - cpus_addr(phys_cpu_present_map)[0]); + init_cpu_possible(&voyager_phys_cpu_present_map); + printk("VOYAGER SMP: voyager_phys_cpu_present_map = 0x%lx\n", + cpus_addr(voyager_phys_cpu_present_map)[0]); /* Here we set up the VIC to enable SMP */ /* enable the CPIs by writing the base vector to their register */ outb(VIC_DEFAULT_CPI_BASE, VIC_CPI_BASE_REGISTER); @@ -628,15 +628,15 @@ void __init smp_boot_cpus(void) /* now that the cat has probed the Voyager System Bus, sanity * check the cpu map */ if (((voyager_quad_processors | voyager_extended_vic_processors) - & cpus_addr(phys_cpu_present_map)[0]) != - cpus_addr(phys_cpu_present_map)[0]) { + & cpus_addr(voyager_phys_cpu_present_map)[0]) != + cpus_addr(voyager_phys_cpu_present_map)[0]) { /* should panic */ printk("\n\n***WARNING*** " "Sanity check of CPU present map FAILED\n"); } } else if (voyager_level == 4) voyager_extended_vic_processors = - cpus_addr(phys_cpu_present_map)[0]; + cpus_addr(voyager_phys_cpu_present_map)[0]; /* this sets up the idle task to run on the current cpu */ voyager_extended_cpus = 1; @@ -670,7 +670,7 @@ void __init smp_boot_cpus(void) /* loop over all the extended VIC CPUs and boot them. The * Quad CPUs must be bootstrapped by their extended VIC cpu */ for (i = 0; i < nr_cpu_ids; i++) { - if (i == boot_cpu_id || !cpu_isset(i, phys_cpu_present_map)) + if (i == boot_cpu_id || !cpu_isset(i, voyager_phys_cpu_present_map)) continue; do_boot_cpu(i); /* This udelay seems to be needed for the Quad boots diff --git a/arch/x86/math-emu/fpu_aux.c b/arch/x86/math-emu/fpu_aux.c index 491e737ce54..aa098708877 100644 --- a/arch/x86/math-emu/fpu_aux.c +++ b/arch/x86/math-emu/fpu_aux.c @@ -30,20 +30,29 @@ static void fclex(void) } /* Needs to be externally visible */ -void finit(void) +void finit_task(struct task_struct *tsk) { - control_word = 0x037f; - partial_status = 0; - top = 0; /* We don't keep top in the status word internally. */ - fpu_tag_word = 0xffff; + struct i387_soft_struct *soft = &tsk->thread.xstate->soft; + struct address *oaddr, *iaddr; + soft->cwd = 0x037f; + soft->swd = 0; + soft->ftop = 0; /* We don't keep top in the status word internally. */ + soft->twd = 0xffff; /* The behaviour is different from that detailed in Section 15.1.6 of the Intel manual */ - operand_address.offset = 0; - operand_address.selector = 0; - instruction_address.offset = 0; - instruction_address.selector = 0; - instruction_address.opcode = 0; - no_ip_update = 1; + oaddr = (struct address *)&soft->foo; + oaddr->offset = 0; + oaddr->selector = 0; + iaddr = (struct address *)&soft->fip; + iaddr->offset = 0; + iaddr->selector = 0; + iaddr->opcode = 0; + soft->no_update = 1; +} + +void finit(void) +{ + finit_task(current); } /* diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index e6d36b49025..b1352250096 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -714,6 +714,8 @@ unsigned long __init_refok init_memory_mapping(unsigned long start, pos = start_pfn << PAGE_SHIFT; end_pfn = ((pos + (PMD_SIZE - 1)) >> PMD_SHIFT) << (PMD_SHIFT - PAGE_SHIFT); + if (end_pfn > (end >> PAGE_SHIFT)) + end_pfn = end >> PAGE_SHIFT; if (start_pfn < end_pfn) { nr_range = save_mr(mr, nr_range, start_pfn, end_pfn, 0); pos = end_pfn << PAGE_SHIFT; diff --git a/arch/x86/mm/iomap_32.c b/arch/x86/mm/iomap_32.c index ca53224fc56..04102d42ff4 100644 --- a/arch/x86/mm/iomap_32.c +++ b/arch/x86/mm/iomap_32.c @@ -20,6 +20,17 @@ #include <asm/pat.h> #include <linux/module.h> +int is_io_mapping_possible(resource_size_t base, unsigned long size) +{ +#ifndef CONFIG_X86_PAE + /* There is no way to map greater than 1 << 32 address without PAE */ + if (base + size > 0x100000000ULL) + return 0; +#endif + return 1; +} +EXPORT_SYMBOL_GPL(is_io_mapping_possible); + /* Map 'pfn' using fixed map 'type' and protections 'prot' */ void * diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c index 93d82038af4..9f205030d9a 100644 --- a/arch/x86/mm/kmmio.c +++ b/arch/x86/mm/kmmio.c @@ -32,11 +32,14 @@ struct kmmio_fault_page { struct list_head list; struct kmmio_fault_page *release_next; unsigned long page; /* location of the fault page */ + bool old_presence; /* page presence prior to arming */ + bool armed; /* * Number of times this page has been registered as a part * of a probe. If zero, page is disarmed and this may be freed. - * Used only by writers (RCU). + * Used only by writers (RCU) and post_kmmio_handler(). + * Protected by kmmio_lock, when linked into kmmio_page_table. */ int count; }; @@ -105,57 +108,85 @@ static struct kmmio_fault_page *get_kmmio_fault_page(unsigned long page) return NULL; } -static void set_page_present(unsigned long addr, bool present, - unsigned int *pglevel) +static void set_pmd_presence(pmd_t *pmd, bool present, bool *old) +{ + pmdval_t v = pmd_val(*pmd); + *old = !!(v & _PAGE_PRESENT); + v &= ~_PAGE_PRESENT; + if (present) + v |= _PAGE_PRESENT; + set_pmd(pmd, __pmd(v)); +} + +static void set_pte_presence(pte_t *pte, bool present, bool *old) +{ + pteval_t v = pte_val(*pte); + *old = !!(v & _PAGE_PRESENT); + v &= ~_PAGE_PRESENT; + if (present) + v |= _PAGE_PRESENT; + set_pte_atomic(pte, __pte(v)); +} + +static int set_page_presence(unsigned long addr, bool present, bool *old) { - pteval_t pteval; - pmdval_t pmdval; unsigned int level; - pmd_t *pmd; pte_t *pte = lookup_address(addr, &level); if (!pte) { pr_err("kmmio: no pte for page 0x%08lx\n", addr); - return; + return -1; } - if (pglevel) - *pglevel = level; - switch (level) { case PG_LEVEL_2M: - pmd = (pmd_t *)pte; - pmdval = pmd_val(*pmd) & ~_PAGE_PRESENT; - if (present) - pmdval |= _PAGE_PRESENT; - set_pmd(pmd, __pmd(pmdval)); + set_pmd_presence((pmd_t *)pte, present, old); break; - case PG_LEVEL_4K: - pteval = pte_val(*pte) & ~_PAGE_PRESENT; - if (present) - pteval |= _PAGE_PRESENT; - set_pte_atomic(pte, __pte(pteval)); + set_pte_presence(pte, present, old); break; - default: pr_err("kmmio: unexpected page level 0x%x.\n", level); - return; + return -1; } __flush_tlb_one(addr); + return 0; } -/** Mark the given page as not present. Access to it will trigger a fault. */ -static void arm_kmmio_fault_page(unsigned long page, unsigned int *pglevel) +/* + * Mark the given page as not present. Access to it will trigger a fault. + * + * Struct kmmio_fault_page is protected by RCU and kmmio_lock, but the + * protection is ignored here. RCU read lock is assumed held, so the struct + * will not disappear unexpectedly. Furthermore, the caller must guarantee, + * that double arming the same virtual address (page) cannot occur. + * + * Double disarming on the other hand is allowed, and may occur when a fault + * and mmiotrace shutdown happen simultaneously. + */ +static int arm_kmmio_fault_page(struct kmmio_fault_page *f) { - set_page_present(page & PAGE_MASK, false, pglevel); + int ret; + WARN_ONCE(f->armed, KERN_ERR "kmmio page already armed.\n"); + if (f->armed) { + pr_warning("kmmio double-arm: page 0x%08lx, ref %d, old %d\n", + f->page, f->count, f->old_presence); + } + ret = set_page_presence(f->page, false, &f->old_presence); + WARN_ONCE(ret < 0, KERN_ERR "kmmio arming 0x%08lx failed.\n", f->page); + f->armed = true; + return ret; } -/** Mark the given page as present. */ -static void disarm_kmmio_fault_page(unsigned long page, unsigned int *pglevel) +/** Restore the given page to saved presence state. */ +static void disarm_kmmio_fault_page(struct kmmio_fault_page *f) { - set_page_present(page & PAGE_MASK, true, pglevel); + bool tmp; + int ret = set_page_presence(f->page, f->old_presence, &tmp); + WARN_ONCE(ret < 0, + KERN_ERR "kmmio disarming 0x%08lx failed.\n", f->page); + f->armed = false; } /* @@ -202,28 +233,32 @@ int kmmio_handler(struct pt_regs *regs, unsigned long addr) ctx = &get_cpu_var(kmmio_ctx); if (ctx->active) { - disarm_kmmio_fault_page(faultpage->page, NULL); if (addr == ctx->addr) { /* - * On SMP we sometimes get recursive probe hits on the - * same address. Context is already saved, fall out. + * A second fault on the same page means some other + * condition needs handling by do_page_fault(), the + * page really not being present is the most common. */ - pr_debug("kmmio: duplicate probe hit on CPU %d, for " - "address 0x%08lx.\n", - smp_processor_id(), addr); - ret = 1; - goto no_kmmio_ctx; - } - /* - * Prevent overwriting already in-flight context. - * This should not happen, let's hope disarming at least - * prevents a panic. - */ - pr_emerg("kmmio: recursive probe hit on CPU %d, " + pr_debug("kmmio: secondary hit for 0x%08lx CPU %d.\n", + addr, smp_processor_id()); + + if (!faultpage->old_presence) + pr_info("kmmio: unexpected secondary hit for " + "address 0x%08lx on CPU %d.\n", addr, + smp_processor_id()); + } else { + /* + * Prevent overwriting already in-flight context. + * This should not happen, let's hope disarming at + * least prevents a panic. + */ + pr_emerg("kmmio: recursive probe hit on CPU %d, " "for address 0x%08lx. Ignoring.\n", smp_processor_id(), addr); - pr_emerg("kmmio: previous hit was at 0x%08lx.\n", - ctx->addr); + pr_emerg("kmmio: previous hit was at 0x%08lx.\n", + ctx->addr); + disarm_kmmio_fault_page(faultpage); + } goto no_kmmio_ctx; } ctx->active++; @@ -244,7 +279,7 @@ int kmmio_handler(struct pt_regs *regs, unsigned long addr) regs->flags &= ~X86_EFLAGS_IF; /* Now we set present bit in PTE and single step. */ - disarm_kmmio_fault_page(ctx->fpage->page, NULL); + disarm_kmmio_fault_page(ctx->fpage); /* * If another cpu accesses the same page while we are stepping, @@ -275,7 +310,7 @@ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) struct kmmio_context *ctx = &get_cpu_var(kmmio_ctx); if (!ctx->active) { - pr_debug("kmmio: spurious debug trap on CPU %d.\n", + pr_warning("kmmio: spurious debug trap on CPU %d.\n", smp_processor_id()); goto out; } @@ -283,7 +318,11 @@ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) if (ctx->probe && ctx->probe->post_handler) ctx->probe->post_handler(ctx->probe, condition, regs); - arm_kmmio_fault_page(ctx->fpage->page, NULL); + /* Prevent racing against release_kmmio_fault_page(). */ + spin_lock(&kmmio_lock); + if (ctx->fpage->count) + arm_kmmio_fault_page(ctx->fpage); + spin_unlock(&kmmio_lock); regs->flags &= ~X86_EFLAGS_TF; regs->flags |= ctx->saved_flags; @@ -315,20 +354,24 @@ static int add_kmmio_fault_page(unsigned long page) f = get_kmmio_fault_page(page); if (f) { if (!f->count) - arm_kmmio_fault_page(f->page, NULL); + arm_kmmio_fault_page(f); f->count++; return 0; } - f = kmalloc(sizeof(*f), GFP_ATOMIC); + f = kzalloc(sizeof(*f), GFP_ATOMIC); if (!f) return -1; f->count = 1; f->page = page; - list_add_rcu(&f->list, kmmio_page_list(f->page)); - arm_kmmio_fault_page(f->page, NULL); + if (arm_kmmio_fault_page(f)) { + kfree(f); + return -1; + } + + list_add_rcu(&f->list, kmmio_page_list(f->page)); return 0; } @@ -347,7 +390,7 @@ static void release_kmmio_fault_page(unsigned long page, f->count--; BUG_ON(f->count < 0); if (!f->count) { - disarm_kmmio_fault_page(f->page, NULL); + disarm_kmmio_fault_page(f); f->release_next = *release_list; *release_list = f; } diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index aebbf67a79d..e0ab173b697 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -11,6 +11,7 @@ #include <linux/bootmem.h> #include <linux/debugfs.h> #include <linux/kernel.h> +#include <linux/module.h> #include <linux/gfp.h> #include <linux/mm.h> #include <linux/fs.h> @@ -868,6 +869,7 @@ pgprot_t pgprot_writecombine(pgprot_t prot) else return pgprot_noncached(prot); } +EXPORT_SYMBOL_GPL(pgprot_writecombine); #if defined(CONFIG_DEBUG_FS) && defined(CONFIG_X86_PAT) diff --git a/arch/x86/mm/testmmiotrace.c b/arch/x86/mm/testmmiotrace.c index ab50a8d7402..427fd1b56df 100644 --- a/arch/x86/mm/testmmiotrace.c +++ b/arch/x86/mm/testmmiotrace.c @@ -1,5 +1,5 @@ /* - * Written by Pekka Paalanen, 2008 <pq@iki.fi> + * Written by Pekka Paalanen, 2008-2009 <pq@iki.fi> */ #include <linux/module.h> #include <linux/io.h> @@ -9,35 +9,74 @@ static unsigned long mmio_address; module_param(mmio_address, ulong, 0); -MODULE_PARM_DESC(mmio_address, "Start address of the mapping of 16 kB."); +MODULE_PARM_DESC(mmio_address, " Start address of the mapping of 16 kB " + "(or 8 MB if read_far is non-zero)."); + +static unsigned long read_far = 0x400100; +module_param(read_far, ulong, 0); +MODULE_PARM_DESC(read_far, " Offset of a 32-bit read within 8 MB " + "(default: 0x400100)."); + +static unsigned v16(unsigned i) +{ + return i * 12 + 7; +} + +static unsigned v32(unsigned i) +{ + return i * 212371 + 13; +} static void do_write_test(void __iomem *p) { unsigned int i; + pr_info(MODULE_NAME ": write test.\n"); mmiotrace_printk("Write test.\n"); + for (i = 0; i < 256; i++) iowrite8(i, p + i); + for (i = 1024; i < (5 * 1024); i += 2) - iowrite16(i * 12 + 7, p + i); + iowrite16(v16(i), p + i); + for (i = (5 * 1024); i < (16 * 1024); i += 4) - iowrite32(i * 212371 + 13, p + i); + iowrite32(v32(i), p + i); } static void do_read_test(void __iomem *p) { unsigned int i; + unsigned errs[3] = { 0 }; + pr_info(MODULE_NAME ": read test.\n"); mmiotrace_printk("Read test.\n"); + for (i = 0; i < 256; i++) - ioread8(p + i); + if (ioread8(p + i) != i) + ++errs[0]; + for (i = 1024; i < (5 * 1024); i += 2) - ioread16(p + i); + if (ioread16(p + i) != v16(i)) + ++errs[1]; + for (i = (5 * 1024); i < (16 * 1024); i += 4) - ioread32(p + i); + if (ioread32(p + i) != v32(i)) + ++errs[2]; + + mmiotrace_printk("Read errors: 8-bit %d, 16-bit %d, 32-bit %d.\n", + errs[0], errs[1], errs[2]); } -static void do_test(void) +static void do_read_far_test(void __iomem *p) { - void __iomem *p = ioremap_nocache(mmio_address, 0x4000); + pr_info(MODULE_NAME ": read far test.\n"); + mmiotrace_printk("Read far test.\n"); + + ioread32(p + read_far); +} + +static void do_test(unsigned long size) +{ + void __iomem *p = ioremap_nocache(mmio_address, size); if (!p) { pr_err(MODULE_NAME ": could not ioremap, aborting.\n"); return; @@ -45,11 +84,15 @@ static void do_test(void) mmiotrace_printk("ioremap returned %p.\n", p); do_write_test(p); do_read_test(p); + if (read_far && read_far < size - 4) + do_read_far_test(p); iounmap(p); } static int __init init(void) { + unsigned long size = (read_far) ? (8 << 20) : (16 << 10); + if (mmio_address == 0) { pr_err(MODULE_NAME ": you have to use the module argument " "mmio_address.\n"); @@ -58,10 +101,11 @@ static int __init init(void) return -ENXIO; } - pr_warning(MODULE_NAME ": WARNING: mapping 16 kB @ 0x%08lx " - "in PCI address space, and writing " - "rubbish in there.\n", mmio_address); - do_test(); + pr_warning(MODULE_NAME ": WARNING: mapping %lu kB @ 0x%08lx in PCI " + "address space, and writing 16 kB of rubbish in there.\n", + size >> 10, mmio_address); + do_test(size); + pr_info(MODULE_NAME ": All done.\n"); return 0; } diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c index e9f80c744cf..10131fbdaad 100644 --- a/arch/x86/oprofile/op_model_ppro.c +++ b/arch/x86/oprofile/op_model_ppro.c @@ -78,8 +78,18 @@ static void ppro_setup_ctrs(struct op_msrs const * const msrs) if (cpu_has_arch_perfmon) { union cpuid10_eax eax; eax.full = cpuid_eax(0xa); - if (counter_width < eax.split.bit_width) - counter_width = eax.split.bit_width; + + /* + * For Core2 (family 6, model 15), don't reset the + * counter width: + */ + if (!(eax.split.version_id == 0 && + current_cpu_data.x86 == 6 && + current_cpu_data.x86_model == 15)) { + + if (counter_width < eax.split.bit_width) + counter_width = eax.split.bit_width; + } } /* clear all counters */ diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index bea215230b2..b58e9633814 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1672,6 +1672,9 @@ asmlinkage void __init xen_start_kernel(void) possible map and a non-dummy shared_info. */ per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0]; + local_irq_disable(); + early_boot_irqs_off(); + xen_raw_console_write("mapping kernel into physical memory\n"); pgd = xen_setup_kernel_pagetable(pgd, xen_start_info->nr_pages); |