aboutsummaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/avr32/boards/atngw100/setup.c7
-rw-r--r--arch/avr32/boards/atstk1000/atstk1002.c18
-rw-r--r--arch/avr32/boards/atstk1000/atstk1003.c12
-rw-r--r--arch/avr32/boards/atstk1000/atstk1004.c12
-rw-r--r--arch/avr32/include/asm/atmel-mci.h32
-rw-r--r--arch/avr32/mach-at32ap/at32ap700x.c88
6 files changed, 139 insertions, 30 deletions
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index b8286f1ce85..f3085208959 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -53,8 +53,11 @@ static struct spi_board_info spi0_board_info[] __initdata = {
};
static struct mci_platform_data __initdata mci0_data = {
- .detect_pin = GPIO_PIN_PC(25),
- .wp_pin = GPIO_PIN_PE(0),
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = GPIO_PIN_PC(25),
+ .wp_pin = GPIO_PIN_PE(0),
+ },
};
/*
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index dfc3443e23a..4fedbc4488d 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -264,16 +264,20 @@ void __init setup_board(void)
#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+static struct mci_platform_data __initdata mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+
/* MMC card detect requires MACB0 *NOT* be used */
#ifdef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM
-static struct mci_platform_data __initdata mci0_data = {
- .detect_pin = GPIO_PIN_PC(14), /* gpio30/sdcd */
- .wp_pin = GPIO_PIN_PC(15), /* gpio31/sdwp */
-};
-#define MCI_PDATA &mci0_data
+ .detect_pin = GPIO_PIN_PC(14), /* gpio30/sdcd */
+ .wp_pin = GPIO_PIN_PC(15), /* gpio31/sdwp */
#else
-#define MCI_PDATA NULL
+ .detect_pin = -ENODEV,
+ .wp_pin = -ENODEV,
#endif /* SW6 for sd{cd,wp} routing */
+ },
+};
#endif /* SW2 for MMC signal routing */
@@ -326,7 +330,7 @@ static int __init atstk1002_init(void)
at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
#endif
#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- at32_add_device_mci(0, MCI_PDATA);
+ at32_add_device_mci(0, &mci0_pdata);
#endif
#ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c
index 0cf664174c1..acc61235b89 100644
--- a/arch/avr32/boards/atstk1000/atstk1003.c
+++ b/arch/avr32/boards/atstk1000/atstk1003.c
@@ -66,6 +66,16 @@ static struct spi_board_info spi1_board_info[] __initdata = { {
} };
#endif
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+static struct mci_platform_data __initdata mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = -ENODEV,
+ .wp_pin = -ENODEV,
+ },
+};
+#endif
+
#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
static void __init atstk1003_setup_extdac(void)
{
@@ -154,7 +164,7 @@ static int __init atstk1003_init(void)
at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
#endif
#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- at32_add_device_mci(0, NULL);
+ at32_add_device_mci(0, &mci0_data);
#endif
at32_add_device_usba(0, NULL);
#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
index 50a5273e591..d6a2d02f032 100644
--- a/arch/avr32/boards/atstk1000/atstk1004.c
+++ b/arch/avr32/boards/atstk1000/atstk1004.c
@@ -71,6 +71,16 @@ static struct spi_board_info spi1_board_info[] __initdata = { {
} };
#endif
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+static struct mci_platform_data __initdata mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = -ENODEV,
+ .wp_pin = -ENODEV,
+ },
+};
+#endif
+
#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
static void __init atstk1004_setup_extdac(void)
{
@@ -137,7 +147,7 @@ static int __init atstk1004_init(void)
at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
#endif
#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- at32_add_device_mci(0, NULL);
+ at32_add_device_mci(0, &mci0_data);
#endif
at32_add_device_lcdc(0, &atstk1000_lcdc_data,
fbmem_start, fbmem_size, 0);
diff --git a/arch/avr32/include/asm/atmel-mci.h b/arch/avr32/include/asm/atmel-mci.h
index c2ea6e1c9aa..59f3fadd0b6 100644
--- a/arch/avr32/include/asm/atmel-mci.h
+++ b/arch/avr32/include/asm/atmel-mci.h
@@ -1,9 +1,39 @@
#ifndef __ASM_AVR32_ATMEL_MCI_H
#define __ASM_AVR32_ATMEL_MCI_H
-struct mci_platform_data {
+#define ATMEL_MCI_MAX_NR_SLOTS 2
+
+struct dma_slave;
+
+/**
+ * struct mci_slot_pdata - board-specific per-slot configuration
+ * @bus_width: Number of data lines wired up the slot
+ * @detect_pin: GPIO pin wired to the card detect switch
+ * @wp_pin: GPIO pin wired to the write protect sensor
+ *
+ * If a given slot is not present on the board, @bus_width should be
+ * set to 0. The other fields are ignored in this case.
+ *
+ * Any pins that aren't available should be set to a negative value.
+ *
+ * Note that support for multiple slots is experimental -- some cards
+ * might get upset if we don't get the clock management exactly right.
+ * But in most cases, it should work just fine.
+ */
+struct mci_slot_pdata {
+ unsigned int bus_width;
int detect_pin;
int wp_pin;
};
+/**
+ * struct mci_platform_data - board-specific MMC/SDcard configuration
+ * @dma_slave: DMA slave interface to use in data transfers, or NULL.
+ * @slot: Per-slot configuration data.
+ */
+struct mci_platform_data {
+ struct dma_slave *dma_slave;
+ struct mci_slot_pdata slot[ATMEL_MCI_MAX_NR_SLOTS];
+};
+
#endif /* __ASM_AVR32_ATMEL_MCI_H */
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index e01dbe4ebb4..f1b9a3ac273 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -1272,10 +1272,14 @@ static struct clk atmel_mci0_pclk = {
struct platform_device *__init
at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
{
- struct mci_platform_data _data;
struct platform_device *pdev;
+ struct dw_dma_slave *dws;
- if (id != 0)
+ if (id != 0 || !data)
+ return NULL;
+
+ /* Must have at least one usable slot */
+ if (!data->slot[0].bus_width && !data->slot[1].bus_width)
return NULL;
pdev = platform_device_alloc("atmel_mci", id);
@@ -1286,28 +1290,76 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
ARRAY_SIZE(atmel_mci0_resource)))
goto fail;
- if (!data) {
- data = &_data;
- memset(data, -1, sizeof(struct mci_platform_data));
- data->detect_pin = GPIO_PIN_NONE;
- data->wp_pin = GPIO_PIN_NONE;
- }
+ if (data->dma_slave)
+ dws = kmemdup(to_dw_dma_slave(data->dma_slave),
+ sizeof(struct dw_dma_slave), GFP_KERNEL);
+ else
+ dws = kzalloc(sizeof(struct dw_dma_slave), GFP_KERNEL);
+
+ dws->slave.dev = &pdev->dev;
+ dws->slave.dma_dev = &dw_dmac0_device.dev;
+ dws->slave.reg_width = DMA_SLAVE_WIDTH_32BIT;
+ dws->cfg_hi = (DWC_CFGH_SRC_PER(0)
+ | DWC_CFGH_DST_PER(1));
+ dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL
+ | DWC_CFGL_HS_SRC_POL);
+
+ data->dma_slave = &dws->slave;
if (platform_device_add_data(pdev, data,
sizeof(struct mci_platform_data)))
goto fail;
- select_peripheral(PA(10), PERIPH_A, 0); /* CLK */
- select_peripheral(PA(11), PERIPH_A, 0); /* CMD */
- select_peripheral(PA(12), PERIPH_A, 0); /* DATA0 */
- select_peripheral(PA(13), PERIPH_A, 0); /* DATA1 */
- select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */
- select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */
+ /* CLK line is common to both slots */
+ select_peripheral(PA(10), PERIPH_A, 0);
- if (gpio_is_valid(data->detect_pin))
- at32_select_gpio(data->detect_pin, 0);
- if (gpio_is_valid(data->wp_pin))
- at32_select_gpio(data->wp_pin, 0);
+ switch (data->slot[0].bus_width) {
+ case 4:
+ select_peripheral(PA(13), PERIPH_A, 0); /* DATA1 */
+ select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */
+ select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */
+ /* fall through */
+ case 1:
+ select_peripheral(PA(11), PERIPH_A, 0); /* CMD */
+ select_peripheral(PA(12), PERIPH_A, 0); /* DATA0 */
+
+ if (gpio_is_valid(data->slot[0].detect_pin))
+ at32_select_gpio(data->slot[0].detect_pin, 0);
+ if (gpio_is_valid(data->slot[0].wp_pin))
+ at32_select_gpio(data->slot[0].wp_pin, 0);
+ break;
+ case 0:
+ /* Slot is unused */
+ break;
+ default:
+ goto fail;
+ }
+
+ switch (data->slot[1].bus_width) {
+ case 4:
+ select_peripheral(PB(8), PERIPH_B, 0); /* DATA1 */
+ select_peripheral(PB(9), PERIPH_B, 0); /* DATA2 */
+ select_peripheral(PB(10), PERIPH_B, 0); /* DATA3 */
+ /* fall through */
+ case 1:
+ select_peripheral(PB(6), PERIPH_B, 0); /* CMD */
+ select_peripheral(PB(7), PERIPH_B, 0); /* DATA0 */
+
+ if (gpio_is_valid(data->slot[1].detect_pin))
+ at32_select_gpio(data->slot[1].detect_pin, 0);
+ if (gpio_is_valid(data->slot[1].wp_pin))
+ at32_select_gpio(data->slot[1].wp_pin, 0);
+ break;
+ case 0:
+ /* Slot is unused */
+ break;
+ default:
+ if (!data->slot[0].bus_width)
+ goto fail;
+
+ data->slot[1].bus_width = 0;
+ break;
+ }
atmel_mci0_pclk.dev = &pdev->dev;
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-25 23:57:15 +0000