diff options
Diffstat (limited to 'arch')
39 files changed, 1107 insertions, 752 deletions
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index 57f23b46539..e316bd93313 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -133,7 +133,7 @@ config IXP4XX_INDIRECT_PCI into the kernel and we can use the standard read[bwl]/write[bwl] macros. This is the preferred method due to speed but it limits the system to just 64MB of PCI memory. This can be - problamatic if using video cards and other memory-heavy devices. + problematic if using video cards and other memory-heavy devices. 2) If > 64MB of memory space is required, the IXP4xx can be configured to use indirect registers to access PCI This allows diff --git a/arch/arm/mach-lh7a40x/Kconfig b/arch/arm/mach-lh7a40x/Kconfig index 147b01928a9..6f4c6a1798c 100644 --- a/arch/arm/mach-lh7a40x/Kconfig +++ b/arch/arm/mach-lh7a40x/Kconfig @@ -8,7 +8,7 @@ config MACH_KEV7A400 help Say Y here if you are using the Sharp KEV7A400 development board. This hardware is discontinued, so I'd be very - suprised if you wanted this option. + surprised if you wanted this option. config MACH_LPD7A400 bool "LPD7A400 Card Engine" diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 63965c78de8..9aa26b99045 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -91,7 +91,7 @@ config SMDK2440_CPU2442 config MACH_S3C2413 bool help - Internal node for S3C2413 verison of SMDK2413, so that + Internal node for S3C2413 version of SMDK2413, so that machine_is_s3c2413() will work when MACH_SMDK2413 is selected diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index c0bfb8212b7..b09a19f87d6 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -197,7 +197,7 @@ config CPU_ARM940T select CPU_CP15_MPU help ARM940T is a member of the ARM9TDMI family of general- - purpose microprocessors with MPU and seperate 4KB + purpose microprocessors with MPU and separate 4KB instruction and 4KB data cases, each with a 4-word line length. diff --git a/arch/cris/arch-v10/Kconfig b/arch/cris/arch-v10/Kconfig index 44eb1b9accb..c7ea9efd010 100644 --- a/arch/cris/arch-v10/Kconfig +++ b/arch/cris/arch-v10/Kconfig @@ -323,7 +323,7 @@ config ETRAX_DEF_R_WAITSTATES depends on ETRAX_ARCH_V10 default "95a6" help - Waitstates for SRAM, Flash and peripherials (not DRAM). 95f8 is a + Waitstates for SRAM, Flash and peripherals (not DRAM). 95f8 is a good choice for most Axis products... config ETRAX_DEF_R_BUS_CONFIG diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig index 734d5f3a530..e7e724bc0ba 100644 --- a/arch/cris/arch-v10/drivers/Kconfig +++ b/arch/cris/arch-v10/drivers/Kconfig @@ -839,7 +839,7 @@ config ETRAX_DS1302_TRICKLE_CHARGE default "0" help This controls the initial value of the trickle charge register. - 0 = disabled (use this if you are unsure or have a non rechargable battery) + 0 = disabled (use this if you are unsure or have a non rechargeable battery) Otherwise the following values can be OR:ed together to control the charge current: 1 = 2kohm, 2 = 4kohm, 3 = 4kohm diff --git a/arch/cris/arch-v10/drivers/eeprom.c b/arch/cris/arch-v10/drivers/eeprom.c index 6e1f191a71e..284ebfda03f 100644 --- a/arch/cris/arch-v10/drivers/eeprom.c +++ b/arch/cris/arch-v10/drivers/eeprom.c @@ -1,7 +1,7 @@ /*!***************************************************************************** *! -*! Implements an interface for i2c compatible eeproms to run under linux. -*! Supports 2k, 8k(?) and 16k. Uses adaptive timing adjustents by +*! Implements an interface for i2c compatible eeproms to run under Linux. +*! Supports 2k, 8k(?) and 16k. Uses adaptive timing adjustments by *! Johan.Adolfsson@axis.com *! *! Probing results: @@ -51,7 +51,7 @@ *! Revision 1.8 2001/06/15 13:24:29 jonashg *! * Added verification of pointers from userspace in read and write. *! * Made busy counter volatile. -*! * Added define for inital write delay. +*! * Added define for initial write delay. *! * Removed warnings by using loff_t instead of unsigned long. *! *! Revision 1.7 2001/06/14 15:26:54 jonashg diff --git a/arch/cris/arch-v10/drivers/i2c.c b/arch/cris/arch-v10/drivers/i2c.c index 6114596c3b3..092c724a645 100644 --- a/arch/cris/arch-v10/drivers/i2c.c +++ b/arch/cris/arch-v10/drivers/i2c.c @@ -47,7 +47,7 @@ *! Update Port B register and shadow even when running with hardware support *! to avoid glitches when reading bits *! Never set direction to out in i2c_inbyte -*! Removed incorrect clock togling at end of i2c_inbyte +*! Removed incorrect clock toggling at end of i2c_inbyte *! *! Revision 1.8 2002/08/13 06:31:53 starvik *! Made SDA and SCL line configurable diff --git a/arch/cris/arch-v10/kernel/kgdb.c b/arch/cris/arch-v10/kernel/kgdb.c index 34528da9881..07628a13c6c 100644 --- a/arch/cris/arch-v10/kernel/kgdb.c +++ b/arch/cris/arch-v10/kernel/kgdb.c @@ -33,7 +33,7 @@ *! *! Revision 1.2 2002/11/19 14:35:24 starvik *! Changes from linux 2.4 -*! Changed struct initializer syntax to the currently prefered notation +*! Changed struct initializer syntax to the currently preferred notation *! *! Revision 1.1 2001/12/17 13:59:27 bjornw *! Initial revision diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig index a33097f9536..f64624fc450 100644 --- a/arch/cris/arch-v32/drivers/Kconfig +++ b/arch/cris/arch-v32/drivers/Kconfig @@ -88,7 +88,7 @@ config ETRAX_SERIAL_PORT0_DMA7_IN help Enables the DMA7 input channel for ser0 (ttyS0). If you do not enable DMA, an interrupt for each character will be - used when receiveing data. + used when receiving data. Normally you want to use DMA, unless you use the DMA channel for something else. @@ -157,7 +157,7 @@ config ETRAX_SERIAL_PORT1_DMA5_IN help Enables the DMA5 input channel for ser1 (ttyS1). If you do not enable DMA, an interrupt for each character will be - used when receiveing data. + used when receiving data. Normally you want this on, unless you use the DMA channel for something else. @@ -228,7 +228,7 @@ config ETRAX_SERIAL_PORT2_DMA3_IN help Enables the DMA3 input channel for ser2 (ttyS2). If you do not enable DMA, an interrupt for each character will be - used when receiveing data. + used when receiving data. Normally you want to use DMA, unless you use the DMA channel for something else. @@ -297,7 +297,7 @@ config ETRAX_SERIAL_PORT3_DMA9_IN help Enables the DMA9 input channel for ser3 (ttyS3). If you do not enable DMA, an interrupt for each character will be - used when receiveing data. + used when receiving data. Normally you want to use DMA, unless you use the DMA channel for something else. diff --git a/arch/i386/kernel/cpuid.c b/arch/i386/kernel/cpuid.c index fde8bea85ce..ab0c327e79d 100644 --- a/arch/i386/kernel/cpuid.c +++ b/arch/i386/kernel/cpuid.c @@ -156,14 +156,14 @@ static struct file_operations cpuid_fops = { .open = cpuid_open, }; -static int cpuid_class_device_create(int i) +static int cpuid_device_create(int i) { int err = 0; - struct class_device *class_err; + struct device *dev; - class_err = class_device_create(cpuid_class, NULL, MKDEV(CPUID_MAJOR, i), NULL, "cpu%d",i); - if (IS_ERR(class_err)) - err = PTR_ERR(class_err); + dev = device_create(cpuid_class, NULL, MKDEV(CPUID_MAJOR, i), "cpu%d",i); + if (IS_ERR(dev)) + err = PTR_ERR(dev); return err; } @@ -174,10 +174,10 @@ static int cpuid_class_cpu_callback(struct notifier_block *nfb, unsigned long ac switch (action) { case CPU_ONLINE: - cpuid_class_device_create(cpu); + cpuid_device_create(cpu); break; case CPU_DEAD: - class_device_destroy(cpuid_class, MKDEV(CPUID_MAJOR, cpu)); + device_destroy(cpuid_class, MKDEV(CPUID_MAJOR, cpu)); break; } return NOTIFY_OK; @@ -206,7 +206,7 @@ static int __init cpuid_init(void) goto out_chrdev; } for_each_online_cpu(i) { - err = cpuid_class_device_create(i); + err = cpuid_device_create(i); if (err != 0) goto out_class; } @@ -218,7 +218,7 @@ static int __init cpuid_init(void) out_class: i = 0; for_each_online_cpu(i) { - class_device_destroy(cpuid_class, MKDEV(CPUID_MAJOR, i)); + device_destroy(cpuid_class, MKDEV(CPUID_MAJOR, i)); } class_destroy(cpuid_class); out_chrdev: @@ -232,7 +232,7 @@ static void __exit cpuid_exit(void) int cpu = 0; for_each_online_cpu(cpu) - class_device_destroy(cpuid_class, MKDEV(CPUID_MAJOR, cpu)); + device_destroy(cpuid_class, MKDEV(CPUID_MAJOR, cpu)); class_destroy(cpuid_class); unregister_chrdev(CPUID_MAJOR, "cpu/cpuid"); unregister_hotcpu_notifier(&cpuid_class_cpu_notifier); diff --git a/arch/i386/kernel/msr.c b/arch/i386/kernel/msr.c index d535cdbbfd2..a773f776c9e 100644 --- a/arch/i386/kernel/msr.c +++ b/arch/i386/kernel/msr.c @@ -239,14 +239,14 @@ static struct file_operations msr_fops = { .open = msr_open, }; -static int msr_class_device_create(int i) +static int msr_device_create(int i) { int err = 0; - struct class_device *class_err; + struct device *dev; - class_err = class_device_create(msr_class, NULL, MKDEV(MSR_MAJOR, i), NULL, "msr%d",i); - if (IS_ERR(class_err)) - err = PTR_ERR(class_err); + dev = device_create(msr_class, NULL, MKDEV(MSR_MAJOR, i), "msr%d",i); + if (IS_ERR(dev)) + err = PTR_ERR(dev); return err; } @@ -258,10 +258,10 @@ static int msr_class_cpu_callback(struct notifier_block *nfb, switch (action) { case CPU_ONLINE: - msr_class_device_create(cpu); + msr_device_create(cpu); break; case CPU_DEAD: - class_device_destroy(msr_class, MKDEV(MSR_MAJOR, cpu)); + device_destroy(msr_class, MKDEV(MSR_MAJOR, cpu)); break; } return NOTIFY_OK; @@ -290,7 +290,7 @@ static int __init msr_init(void) goto out_chrdev; } for_each_online_cpu(i) { - err = msr_class_device_create(i); + err = msr_device_create(i); if (err != 0) goto out_class; } @@ -302,7 +302,7 @@ static int __init msr_init(void) out_class: i = 0; for_each_online_cpu(i) - class_device_destroy(msr_class, MKDEV(MSR_MAJOR, i)); + device_destroy(msr_class, MKDEV(MSR_MAJOR, i)); class_destroy(msr_class); out_chrdev: unregister_chrdev(MSR_MAJOR, "cpu/msr"); @@ -314,7 +314,7 @@ static void __exit msr_exit(void) { int cpu = 0; for_each_online_cpu(cpu) - class_device_destroy(msr_class, MKDEV(MSR_MAJOR, cpu)); + device_destroy(msr_class, MKDEV(MSR_MAJOR, cpu)); class_destroy(msr_class); unregister_chrdev(MSR_MAJOR, "cpu/msr"); unregister_hotcpu_notifier(&msr_class_cpu_notifier); diff --git a/arch/i386/kernel/pci-dma.c b/arch/i386/kernel/pci-dma.c index 25fe6685393..5c8c6ef1fc5 100644 --- a/arch/i386/kernel/pci-dma.c +++ b/arch/i386/kernel/pci-dma.c @@ -75,7 +75,7 @@ EXPORT_SYMBOL(dma_free_coherent); int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, dma_addr_t device_addr, size_t size, int flags) { - void __iomem *mem_base; + void __iomem *mem_base = NULL; int pages = size >> PAGE_SHIFT; int bitmap_size = (pages + 31)/32; @@ -114,6 +114,8 @@ int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, free1_out: kfree(dev->dma_mem->bitmap); out: + if (mem_base) + iounmap(mem_base); return 0; } EXPORT_SYMBOL(dma_declare_coherent_memory); diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c index cdfcf971098..53ca6e89798 100644 --- a/arch/i386/pci/common.c +++ b/arch/i386/pci/common.c @@ -20,7 +20,7 @@ unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 | PCI_PROBE_MMCONF; -int pci_bf_sort; +static int pci_bf_sort; int pci_routeirq; int pcibios_last_bus = -1; unsigned long pirq_table_addr; diff --git a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c index c1949ff38d6..cde1170b01a 100644 --- a/arch/i386/pci/fixup.c +++ b/arch/i386/pci/fixup.c @@ -74,52 +74,6 @@ static void __devinit pci_fixup_ncr53c810(struct pci_dev *d) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, pci_fixup_ncr53c810); -static void __devinit pci_fixup_ide_bases(struct pci_dev *d) -{ - int i; - - /* - * PCI IDE controllers use non-standard I/O port decoding, respect it. - */ - if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE) - return; - DBG("PCI: IDE base address fixup for %s\n", pci_name(d)); - for(i=0; i<4; i++) { - struct resource *r = &d->resource[i]; - if ((r->start & ~0x80) == 0x374) { - r->start |= 2; - r->end = r->start; - } - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); - -static void __devinit pci_fixup_ide_trash(struct pci_dev *d) -{ - int i; - - /* - * Runs the fixup only for the first IDE controller - * (Shai Fultheim - shai@ftcon.com) - */ - static int called = 0; - if (called) - return; - called = 1; - - /* - * There exist PCI IDE controllers which have utter garbage - * in first four base registers. Ignore that. - */ - DBG("PCI: IDE base address trash cleared for %s\n", pci_name(d)); - for(i=0; i<4; i++) - d->resource[i].start = d->resource[i].end = d->resource[i].flags = 0; -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5513, pci_fixup_ide_trash); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, pci_fixup_ide_trash); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_11, pci_fixup_ide_trash); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_9, pci_fixup_ide_trash); - static void __devinit pci_fixup_latency(struct pci_dev *d) { /* diff --git a/arch/i386/pci/i386.c b/arch/i386/pci/i386.c index 98580292f0d..43005f04442 100644 --- a/arch/i386/pci/i386.c +++ b/arch/i386/pci/i386.c @@ -104,16 +104,24 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) /* Depth-First Search on bus tree */ list_for_each_entry(bus, bus_list, node) { if ((dev = bus->self)) { - for (idx = PCI_BRIDGE_RESOURCES; idx < PCI_NUM_RESOURCES; idx++) { + for (idx = PCI_BRIDGE_RESOURCES; + idx < PCI_NUM_RESOURCES; idx++) { r = &dev->resource[idx]; if (!r->flags) continue; pr = pci_find_parent_resource(dev, r); - if (!r->start || !pr || request_resource(pr, r) < 0) { - printk(KERN_ERR "PCI: Cannot allocate resource region %d of bridge %s\n", idx, pci_name(dev)); - /* Something is wrong with the region. - Invalidate the resource to prevent child - resource allocations in this range. */ + if (!r->start || !pr || + request_resource(pr, r) < 0) { + printk(KERN_ERR "PCI: Cannot allocate " + "resource region %d " + "of bridge %s\n", + idx, pci_name(dev)); + /* + * Something is wrong with the region. + * Invalidate the resource to prevent + * child resource allocations in this + * range. + */ r->flags = 0; } } @@ -131,7 +139,7 @@ static void __init pcibios_allocate_resources(int pass) for_each_pci_dev(dev) { pci_read_config_word(dev, PCI_COMMAND, &command); - for(idx = 0; idx < 6; idx++) { + for (idx = 0; idx < PCI_ROM_RESOURCE; idx++) { r = &dev->resource[idx]; if (r->parent) /* Already allocated */ continue; @@ -142,11 +150,15 @@ static void __init pcibios_allocate_resources(int pass) else disabled = !(command & PCI_COMMAND_MEMORY); if (pass == disabled) { - DBG("PCI: Resource %08lx-%08lx (f=%lx, d=%d, p=%d)\n", + DBG("PCI: Resource %08lx-%08lx " + "(f=%lx, d=%d, p=%d)\n", r->start, r->end, r->flags, disabled, pass); pr = pci_find_parent_resource(dev, r); if (!pr || request_resource(pr, r) < 0) { - printk(KERN_ERR "PCI: Cannot allocate resource region %d of device %s\n", idx, pci_name(dev)); + printk(KERN_ERR "PCI: Cannot allocate " + "resource region %d " + "of device %s\n", + idx, pci_name(dev)); /* We'll assign a new address later */ r->end -= r->start; r->start = 0; @@ -156,12 +168,16 @@ static void __init pcibios_allocate_resources(int pass) if (!pass) { r = &dev->resource[PCI_ROM_RESOURCE]; if (r->flags & IORESOURCE_ROM_ENABLE) { - /* Turn the ROM off, leave the resource region, but keep it unregistered. */ + /* Turn the ROM off, leave the resource region, + * but keep it unregistered. */ u32 reg; - DBG("PCI: Switching off ROM of %s\n", pci_name(dev)); + DBG("PCI: Switching off ROM of %s\n", + pci_name(dev)); r->flags &= ~IORESOURCE_ROM_ENABLE; - pci_read_config_dword(dev, dev->rom_base_reg, ®); - pci_write_config_dword(dev, dev->rom_base_reg, reg & ~PCI_ROM_ADDRESS_ENABLE); + pci_read_config_dword(dev, + dev->rom_base_reg, ®); + pci_write_config_dword(dev, dev->rom_base_reg, + reg & ~PCI_ROM_ADDRESS_ENABLE); } } } @@ -173,9 +189,11 @@ static int __init pcibios_assign_resources(void) struct resource *r, *pr; if (!(pci_probe & PCI_ASSIGN_ROMS)) { - /* Try to use BIOS settings for ROMs, otherwise let - pci_assign_unassigned_resources() allocate the new - addresses. */ + /* + * Try to use BIOS settings for ROMs, otherwise let + * pci_assign_unassigned_resources() allocate the new + * addresses. + */ for_each_pci_dev(dev) { r = &dev->resource[PCI_ROM_RESOURCE]; if (!r->flags || !r->start) @@ -215,9 +233,9 @@ int pcibios_enable_resources(struct pci_dev *dev, int mask) pci_read_config_word(dev, PCI_COMMAND, &cmd); old_cmd = cmd; - for(idx = 0; idx < PCI_NUM_RESOURCES; idx++) { + for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) { /* Only set up the requested stuff */ - if (!(mask & (1<<idx))) + if (!(mask & (1 << idx))) continue; r = &dev->resource[idx]; @@ -227,7 +245,9 @@ int pcibios_enable_resources(struct pci_dev *dev, int mask) (!(r->flags & IORESOURCE_ROM_ENABLE))) continue; if (!r->start && r->end) { - printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev)); + printk(KERN_ERR "PCI: Device %s not available " + "because of resource collisions\n", + pci_name(dev)); return -EINVAL; } if (r->flags & IORESOURCE_IO) @@ -236,7 +256,8 @@ int pcibios_enable_resources(struct pci_dev *dev, int mask) cmd |= PCI_COMMAND_MEMORY; } if (cmd != old_cmd) { - printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd); + printk("PCI: Enabling device %s (%04x -> %04x)\n", + pci_name(dev), old_cmd, cmd); pci_write_config_word(dev, PCI_COMMAND, cmd); } return 0; @@ -258,7 +279,8 @@ void pcibios_set_master(struct pci_dev *dev) lat = pcibios_max_latency; else return; - printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", pci_name(dev), lat); + printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", + pci_name(dev), lat); pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); } diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c index 69163998ade..e65551cd821 100644 --- a/arch/i386/pci/irq.c +++ b/arch/i386/pci/irq.c @@ -543,6 +543,12 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route case PCI_DEVICE_ID_INTEL_ICH8_2: case PCI_DEVICE_ID_INTEL_ICH8_3: case PCI_DEVICE_ID_INTEL_ICH8_4: + case PCI_DEVICE_ID_INTEL_ICH9_0: + case PCI_DEVICE_ID_INTEL_ICH9_1: + case PCI_DEVICE_ID_INTEL_ICH9_2: + case PCI_DEVICE_ID_INTEL_ICH9_3: + case PCI_DEVICE_ID_INTEL_ICH9_4: + case PCI_DEVICE_ID_INTEL_ICH9_5: r->name = "PIIX/ICH"; r->get = pirq_piix_get; r->set = pirq_piix_set; diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c index db8e1fcfa04..14691cda05c 100644 --- a/arch/ia64/hp/common/sba_iommu.c +++ b/arch/ia64/hp/common/sba_iommu.c @@ -75,7 +75,7 @@ ** If a device prefetches beyond the end of a valid pdir entry, it will cause ** a hard failure, ie. MCA. Version 3.0 and later of the zx1 LBA should ** disconnect on 4k boundaries and prevent such issues. If the device is -** particularly agressive, this option will keep the entire pdir valid such +** particularly aggressive, this option will keep the entire pdir valid such ** that prefetching will hit a valid address. This could severely impact ** error containment, and is therefore off by default. The page that is ** used for spill-over is poisoned, so that should help debugging somewhat. @@ -258,10 +258,10 @@ static u64 prefetch_spill_page; /* ** DMA_CHUNK_SIZE is used by the SCSI mid-layer to break up -** (or rather not merge) DMA's into managable chunks. +** (or rather not merge) DMAs into manageable chunks. ** On parisc, this is more of the software/tuning constraint -** rather than the HW. I/O MMU allocation alogorithms can be -** faster with smaller size is (to some degree). +** rather than the HW. I/O MMU allocation algorithms can be +** faster with smaller sizes (to some degree). */ #define DMA_CHUNK_SIZE (BITS_PER_LONG*iovp_size) diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index b30be7c48ba..f4edfbf2713 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -469,10 +469,11 @@ pcibios_fixup_resources(struct pci_dev *dev, int start, int limit) } } -static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev) +void __devinit pcibios_fixup_device_resources(struct pci_dev *dev) { pcibios_fixup_resources(dev, 0, PCI_BRIDGE_RESOURCES); } +EXPORT_SYMBOL_GPL(pcibios_fixup_device_resources); static void __devinit pcibios_fixup_bridge_resources(struct pci_dev *dev) { @@ -493,6 +494,7 @@ pcibios_fixup_bus (struct pci_bus *b) } list_for_each_entry(dev, &b->devices, bus_list) pcibios_fixup_device_resources(dev); + platform_pci_fixup_bus(b); return; } @@ -738,75 +740,44 @@ int ia64_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size) return ret; } +/* It's defined in drivers/pci/pci.c */ +extern u8 pci_cache_line_size; + /** - * pci_cacheline_size - determine cacheline size for PCI devices - * @dev: void + * set_pci_cacheline_size - determine cacheline size for PCI devices * * We want to use the line-size of the outer-most cache. We assume * that this line-size is the same for all CPUs. * * Code mostly taken from arch/ia64/kernel/palinfo.c:cache_info(). - * - * RETURNS: An appropriate -ERRNO error value on eror, or zero for success. */ -static unsigned long -pci_cacheline_size (void) +static void __init set_pci_cacheline_size(void) { u64 levels, unique_caches; s64 status; pal_cache_config_info_t cci; - static u8 cacheline_size; - - if (cacheline_size) - return cacheline_size; status = ia64_pal_cache_summary(&levels, &unique_caches); if (status != 0) { - printk(KERN_ERR "%s: ia64_pal_cache_summary() failed (status=%ld)\n", - __FUNCTION__, status); - return SMP_CACHE_BYTES; + printk(KERN_ERR "%s: ia64_pal_cache_summary() failed " + "(status=%ld)\n", __FUNCTION__, status); + return; } - status = ia64_pal_cache_config_info(levels - 1, /* cache_type (data_or_unified)= */ 2, - &cci); + status = ia64_pal_cache_config_info(levels - 1, + /* cache_type (data_or_unified)= */ 2, &cci); if (status != 0) { - printk(KERN_ERR "%s: ia64_pal_cache_config_info() failed (status=%ld)\n", - __FUNCTION__, status); - return SMP_CACHE_BYTES; + printk(KERN_ERR "%s: ia64_pal_cache_config_info() failed " + "(status=%ld)\n", __FUNCTION__, status); + return; } - cacheline_size = 1 << cci.pcci_line_size; - return cacheline_size; + pci_cache_line_size = (1 << cci.pcci_line_size) / 4; } -/** - * pcibios_prep_mwi - helper function for drivers/pci/pci.c:pci_set_mwi() - * @dev: the PCI device for which MWI is enabled - * - * For ia64, we can get the cacheline sizes from PAL. - * - * RETURNS: An appropriate -ERRNO error value on eror, or zero for success. - */ -int -pcibios_prep_mwi (struct pci_dev *dev) -{ - unsigned long desired_linesize, current_linesize; - int rc = 0; - u8 pci_linesize; - - desired_linesize = pci_cacheline_size(); - - pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &pci_linesize); - current_linesize = 4 * pci_linesize; - if (desired_linesize != current_linesize) { - printk(KERN_WARNING "PCI: slot %s has incorrect PCI cache line size of %lu bytes,", - pci_name(dev), current_linesize); - if (current_linesize > desired_linesize) { - printk(" expected %lu bytes instead\n", desired_linesize); - rc = -EINVAL; - } else { - printk(" correcting to %lu\n", desired_linesize); - pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, desired_linesize / 4); - } - } - return rc; +static int __init pcibios_init(void) +{ + set_pci_cacheline_size(); + return 0; } + +subsys_initcall(pcibios_init); diff --git a/arch/ia64/sn/kernel/Makefile b/arch/ia64/sn/kernel/Makefile index 2d78f34dd76..0a59371d347 100644 --- a/arch/ia64/sn/kernel/Makefile +++ b/arch/ia64/sn/kernel/Makefile @@ -4,13 +4,14 @@ # License. See the file "COPYING" in the main directory of this archive # for more details. # -# Copyright (C) 1999,2001-2005 Silicon Graphics, Inc. All Rights Reserved. +# Copyright (C) 1999,2001-2006 Silicon Graphics, Inc. All Rights Reserved. # CPPFLAGS += -I$(srctree)/arch/ia64/sn/include obj-y += setup.o bte.o bte_error.o irq.o mca.o idle.o \ - huberror.o io_init.o iomv.o klconflib.o pio_phys.o \ + huberror.o io_acpi_init.o io_common.o \ + io_init.o iomv.o klconflib.o pio_phys.o \ sn2/ obj-$(CONFIG_IA64_GENERIC) += machvec.o obj-$(CONFIG_SGI_TIOCX) += tiocx.o diff --git a/arch/ia64/sn/kernel/io_acpi_init.c b/arch/ia64/sn/kernel/io_acpi_init.c new file mode 100644 index 00000000000..99d7f278612 --- /dev/null +++ b/arch/ia64/sn/kernel/io_acpi_init.c @@ -0,0 +1,231 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Silicon Graphics, Inc. All rights reserved. + */ + +#include <asm/sn/types.h> +#include <asm/sn/addrs.h> +#include <asm/sn/pcidev.h> +#include <asm/sn/pcibus_provider_defs.h> +#include <asm/sn/sn_sal.h> +#include "xtalk/hubdev.h" +#include <linux/acpi.h> + + +/* + * The code in this file will only be executed when running with + * a PROM that has ACPI IO support. (i.e., SN_ACPI_BASE_SUPPORT() == 1) + */ + + +/* + * This value must match the UUID the PROM uses + * (io/acpi/defblk.c) when building a vendor descriptor. + */ +struct acpi_vendor_uuid sn_uuid = { + .subtype = 0, + .data = { 0x2c, 0xc6, 0xa6, 0xfe, 0x9c, 0x44, 0xda, 0x11, + 0xa2, 0x7c, 0x08, 0x00, 0x69, 0x13, 0xea, 0x51 }, +}; + +/* + * Perform the early IO init in PROM. + */ +static s64 +sal_ioif_init(u64 *result) +{ + struct ia64_sal_retval isrv = {0,0,0,0}; + + SAL_CALL_NOLOCK(isrv, + SN_SAL_IOIF_INIT, 0, 0, 0, 0, 0, 0, 0); + *result = isrv.v0; + return isrv.status; +} + +/* + * sn_hubdev_add - The 'add' function of the acpi_sn_hubdev_driver. + * Called for every "SGIHUB" or "SGITIO" device defined + * in the ACPI namespace. + */ +static int __init +sn_hubdev_add(struct acpi_device *device) +{ + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + u64 addr; + struct hubdev_info *hubdev; + struct hubdev_info *hubdev_ptr; + int i; + u64 nasid; + struct acpi_resource *resource; + int ret = 0; + acpi_status status; + struct acpi_resource_vendor_typed *vendor; + extern void sn_common_hubdev_init(struct hubdev_info *); + + status = acpi_get_vendor_resource(device->handle, METHOD_NAME__CRS, + &sn_uuid, &buffer); + if (ACPI_FAILURE(status)) { + printk(KERN_ERR + "sn_hubdev_add: acpi_get_vendor_resource() failed: %d\n", + status); + return 1; + } + + resource = buffer.pointer; + vendor = &resource->data.vendor_typed; + if ((vendor->byte_length - sizeof(struct acpi_vendor_uuid)) != + sizeof(struct hubdev_info *)) { + printk(KERN_ERR + "sn_hubdev_add: Invalid vendor data length: %d\n", + vendor->byte_length); + ret = 1; + goto exit; + } + + memcpy(&addr, vendor->byte_data, sizeof(struct hubdev_info *)); + hubdev_ptr = __va((struct hubdev_info *) addr); + + nasid = hubdev_ptr->hdi_nasid; + i = nasid_to_cnodeid(nasid); + hubdev = (struct hubdev_info *)(NODEPDA(i)->pdinfo); + *hubdev = *hubdev_ptr; + sn_common_hubdev_init(hubdev); + +exit: + kfree(buffer.pointer); + return ret; +} + +/* + * sn_get_bussoft_ptr() - The pcibus_bussoft pointer is found in + * the ACPI Vendor resource for this bus. + */ +static struct pcibus_bussoft * +sn_get_bussoft_ptr(struct pci_bus *bus) +{ + u64 addr; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + acpi_handle handle; + struct pcibus_bussoft *prom_bussoft_ptr; + struct acpi_resource *resource; + acpi_status status; + struct acpi_resource_vendor_typed *vendor; + + + handle = PCI_CONTROLLER(bus)->acpi_handle; + status = acpi_get_vendor_resource(handle, METHOD_NAME__CRS, + &sn_uuid, &buffer); + if (ACPI_FAILURE(status)) { + printk(KERN_ERR "get_acpi_pcibus_ptr: " + "get_acpi_bussoft_info() failed: %d\n", + status); + return NULL; + } + resource = buffer.pointer; + vendor = &resource->data.vendor_typed; + + if ((vendor->byte_length - sizeof(struct acpi_vendor_uuid)) != + sizeof(struct pcibus_bussoft *)) { + printk(KERN_ERR + "get_acpi_bussoft_ptr: Invalid vendor data " + "length %d\n", vendor->byte_length); + kfree(buffer.pointer); + return NULL; + } + memcpy(&addr, vendor->byte_data, sizeof(struct pcibus_bussoft *)); + prom_bussoft_ptr = __va((struct pcibus_bussoft *) addr); + kfree(buffer.pointer); + + return prom_bussoft_ptr; +} + +/* + * sn_acpi_bus_fixup + */ +void +sn_acpi_bus_fixup(struct pci_bus *bus) +{ + struct pci_dev *pci_dev = NULL; + struct pcibus_bussoft *prom_bussoft_ptr; + extern void sn_common_bus_fixup(struct pci_bus *, + struct pcibus_bussoft *); + + if (!bus->parent) { /* If root bus */ + prom_bussoft_ptr = sn_get_bussoft_ptr(bus); + if (prom_bussoft_ptr == NULL) { + printk(KERN_ERR + "sn_pci_fixup_bus: 0x%04x:0x%02x Unable to " + "obtain prom_bussoft_ptr\n", + pci_domain_nr(bus), bus->number); + return; + } + sn_common_bus_fixup(bus, prom_bussoft_ptr); + } + list_for_each_entry(pci_dev, &bus->devices, bus_list) { + sn_pci_fixup_slot(pci_dev); + } +} + +/* + * sn_acpi_slot_fixup - Perform any SN specific slot fixup. + * At present there does not appear to be + * any generic way to handle a ROM image + * that has been shadowed by the PROM, so + * we pass a pointer to it within the + * pcidev_info structure. + */ + +void +sn_acpi_slot_fixup(struct pci_dev *dev, struct pcidev_info *pcidev_info) +{ + void __iomem *addr; + size_t size; + + if (pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE]) { + /* + * A valid ROM image exists and has been shadowed by the + * PROM. Setup the pci_dev ROM resource to point to + * the shadowed copy. + */ + size = dev->resource[PCI_ROM_RESOURCE].end - + dev->resource[PCI_ROM_RESOURCE].start; + addr = + ioremap(pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE], + size); + dev->resource[PCI_ROM_RESOURCE].start = (unsigned long) addr; + dev->resource[PCI_ROM_RESOURCE].end = + (unsigned long) addr + size; + dev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_BIOS_COPY; + } +} + +static struct acpi_driver acpi_sn_hubdev_driver = { + .name = "SGI HUBDEV Driver", + .ids = "SGIHUB,SGITIO", + .ops = { + .add = sn_hubdev_add, + }, +}; + + +/* + * sn_io_acpi_init - PROM has ACPI support for IO, defining at a minimum the + * nodes and root buses in the DSDT. As a result, bus scanning + * will be initiated by the Linux ACPI code. + */ + +void __init +sn_io_acpi_init(void) +{ + u64 result; + s64 status; + + acpi_bus_register_driver(&acpi_sn_hubdev_driver); + status = sal_ioif_init(&result); + if (status || result) + panic("sal_ioif_init failed: [%lx] %s\n", + status, ia64_sal_strerror(status)); +} diff --git a/arch/ia64/sn/kernel/io_common.c b/arch/ia64/sn/kernel/io_common.c new file mode 100644 index 00000000000..d4dd8f4b6b8 --- /dev/null +++ b/arch/ia64/sn/kernel/io_common.c @@ -0,0 +1,613 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Silicon Graphics, Inc. All rights reserved. + */ + +#include <linux/bootmem.h> +#include <asm/sn/types.h> +#include <asm/sn/addrs.h> +#include <asm/sn/sn_feature_sets.h> +#include <asm/sn/geo.h> +#include <asm/sn/io.h> +#include <asm/sn/l1.h> +#include <asm/sn/module.h> +#include <asm/sn/pcibr_provider.h> +#include <asm/sn/pcibus_provider_defs.h> +#include <asm/sn/pcidev.h> +#include <asm/sn/simulator.h> +#include <asm/sn/sn_sal.h> +#include <asm/sn/tioca_provider.h> +#include <asm/sn/tioce_provider.h> +#include "xtalk/hubdev.h" +#include "xtalk/xwidgetdev.h" +#include <linux/acpi.h> +#include <asm/sn/sn2/sn_hwperf.h> +#include <asm/sn/acpi.h> + +extern void sn_init_cpei_timer(void); +extern void register_sn_procfs(void); +extern void sn_acpi_bus_fixup(struct pci_bus *); +extern void sn_bus_fixup(struct pci_bus *); +extern void sn_acpi_slot_fixup(struct pci_dev *, struct pcidev_info *); +extern void sn_more_slot_fixup(struct pci_dev *, struct pcidev_info *); +extern void sn_legacy_pci_window_fixup(struct pci_controller *, u64, u64); +extern void sn_io_acpi_init(void); +extern void sn_io_init(void); + + +static struct list_head sn_sysdata_list; + +/* sysdata list struct */ +struct sysdata_el { + struct list_head entry; + void *sysdata; +}; + +int sn_ioif_inited; /* SN I/O infrastructure initialized? */ + +struct sn_pcibus_provider *sn_pci_provider[PCIIO_ASIC_MAX_TYPES]; /* indexed by asic type */ + +/* + * Hooks and struct for unsupported pci providers + */ + +static dma_addr_t +sn_default_pci_map(struct pci_dev *pdev, unsigned long paddr, size_t size, int type) +{ + return 0; +} + +static void +sn_default_pci_unmap(struct pci_dev *pdev, dma_addr_t addr, int direction) +{ + return; +} + +static void * +sn_default_pci_bus_fixup(struct pcibus_bussoft *soft, struct pci_controller *controller) +{ + return NULL; +} + +static struct sn_pcibus_provider sn_pci_default_provider = { + .dma_map = sn_default_pci_map, + .dma_map_consistent = sn_default_pci_map, + .dma_unmap = sn_default_pci_unmap, + .bus_fixup = sn_default_pci_bus_fixup, +}; + +/* + * Retrieve the DMA Flush List given nasid, widget, and device. + * This list is needed to implement the WAR - Flush DMA data on PIO Reads. + */ +static inline u64 +sal_get_device_dmaflush_list(u64 nasid, u64 widget_num, u64 device_num, + u64 address) +{ + struct ia64_sal_retval ret_stuff; + ret_stuff.status = 0; + ret_stuff.v0 = 0; + + SAL_CALL_NOLOCK(ret_stuff, + (u64) SN_SAL_IOIF_GET_DEVICE_DMAFLUSH_LIST, + (u64) nasid, (u64) widget_num, + (u64) device_num, (u64) address, 0, 0, 0); + return ret_stuff.status; +} + +/* + * Retrieve the pci device information given the bus and device|function number. + */ +static inline u64 +sal_get_pcidev_info(u64 segment, u64 bus_number, u64 devfn, u64 pci_dev, + u64 sn_irq_info) +{ + struct ia64_sal_retval ret_stuff; + ret_stuff.status = 0; + ret_stuff.v0 = 0; + + SAL_CALL_NOLOCK(ret_stuff, + (u64) SN_SAL_IOIF_GET_PCIDEV_INFO, + (u64) segment, (u64) bus_number, (u64) devfn, + (u64) pci_dev, + sn_irq_info, 0, 0); + return ret_stuff.v0; +} + +/* + * sn_pcidev_info_get() - Retrieve the pcidev_info struct for the specified + * device. + */ +inline struct pcidev_info * +sn_pcidev_info_get(struct pci_dev *dev) +{ + struct pcidev_info *pcidev; + + list_for_each_entry(pcidev, + &(SN_PLATFORM_DATA(dev)->pcidev_info), pdi_list) { + if (pcidev->pdi_linux_pcidev == dev) + return pcidev; + } + return NULL; +} + +/* Older PROM flush WAR + * + * 01/16/06 -- This war will be in place until a new official PROM is released. + * Additionally note that the struct sn_flush_device_war also has to be + * removed from arch/ia64/sn/include/xtalk/hubdev.h + */ +static u8 war_implemented = 0; + +static s64 sn_device_fixup_war(u64 nasid, u64 widget, int device, + struct sn_flush_device_common *common) +{ + struct sn_flush_device_war *war_list; + struct sn_flush_device_war *dev_entry; + struct ia64_sal_retval isrv = {0,0,0,0}; + + if (!war_implemented) { + printk(KERN_WARNING "PROM version < 4.50 -- implementing old " + "PROM flush WAR\n"); + war_implemented = 1; + } + + war_list = kzalloc(DEV_PER_WIDGET * sizeof(*war_list), GFP_KERNEL); + if (!war_list) + BUG(); + + SAL_CALL_NOLOCK(isrv, SN_SAL_IOIF_GET_WIDGET_DMAFLUSH_LIST, + nasid, widget, __pa(war_list), 0, 0, 0 ,0); + if (isrv.status) + panic("sn_device_fixup_war failed: %s\n", + ia64_sal_strerror(isrv.status)); + + dev_entry = war_list + device; + memcpy(common,dev_entry, sizeof(*common)); + kfree(war_list); + + return isrv.status; +} + +/* + * sn_common_hubdev_init() - This routine is called to initialize the HUB data + * structure for each node in the system. + */ +void __init +sn_common_hubdev_init(struct hubdev_info *hubdev) +{ + + struct sn_flush_device_kernel *sn_flush_device_kernel; + struct sn_flush_device_kernel *dev_entry; + s64 status; + int widget, device, size; + + /* Attach the error interrupt handlers */ + if (hubdev->hdi_nasid & 1) /* If TIO */ + ice_error_init(hubdev); + else + hub_error_init(hubdev); + + for (widget = 0; widget <= HUB_WIDGET_ID_MAX; widget++) + hubdev->hdi_xwidget_info[widget].xwi_hubinfo = hubdev; + + if (!hubdev->hdi_flush_nasid_list.widget_p) + return; + + size = (HUB_WIDGET_ID_MAX + 1) * + sizeof(struct sn_flush_device_kernel *); + hubdev->hdi_flush_nasid_list.widget_p = + kzalloc(size, GFP_KERNEL); + if (!hubdev->hdi_flush_nasid_list.widget_p) + BUG(); + + for (widget = 0; widget <= HUB_WIDGET_ID_MAX; widget++) { + size = DEV_PER_WIDGET * + sizeof(struct sn_flush_device_kernel); + sn_flush_device_kernel = kzalloc(size, GFP_KERNEL); + if (!sn_flush_device_kernel) + BUG(); + + dev_entry = sn_flush_device_kernel; + for (device = 0; device < DEV_PER_WIDGET; + device++, dev_entry++) { + size = sizeof(struct sn_flush_device_common); + dev_entry->common = kzalloc(size, GFP_KERNEL); + if (!dev_entry->common) + BUG(); + if (sn_prom_feature_available(PRF_DEVICE_FLUSH_LIST)) + status = sal_get_device_dmaflush_list( + hubdev->hdi_nasid, widget, device, + (u64)(dev_entry->common)); + else + status = sn_device_fixup_war(hubdev->hdi_nasid, + widget, device, + dev_entry->common); + if (status != SALRET_OK) + panic("SAL call failed: %s\n", + ia64_sal_strerror(status)); + + spin_lock_init(&dev_entry->sfdl_flush_lock); + } + + if (sn_flush_device_kernel) + hubdev->hdi_flush_nasid_list.widget_p[widget] = + sn_flush_device_kernel; + } +} + +void sn_pci_unfixup_slot(struct pci_dev *dev) +{ + struct pci_dev *host_pci_dev = SN_PCIDEV_INFO(dev)->host_pci_dev; + + sn_irq_unfixup(dev); + pci_dev_put(host_pci_dev); + pci_dev_put(dev); +} + +/* + * sn_pci_fixup_slot() - This routine sets up a slot's resources consistent + * with the Linux PCI abstraction layer. Resources + * acquired from our PCI provider include PIO maps + * to BAR space and interrupt objects. + */ +void sn_pci_fixup_slot(struct pci_dev *dev) +{ + int segment = pci_domain_nr(dev->bus); + int status = 0; + struct pcibus_bussoft *bs; + struct pci_bus *host_pci_bus; + struct pci_dev *host_pci_dev; + struct pcidev_info *pcidev_info; + struct sn_irq_info *sn_irq_info; + unsigned int bus_no, devfn; + + pci_dev_get(dev); /* for the sysdata pointer */ + pcidev_info = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL); + if (!pcidev_info) + BUG(); /* Cannot afford to run out of memory */ + + sn_irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL); + if (!sn_irq_info) + BUG(); /* Cannot afford to run out of memory */ + + /* Call to retrieve pci device information needed by kernel. */ + status = sal_get_pcidev_info((u64) segment, (u64) dev->bus->number, + dev->devfn, + (u64) __pa(pcidev_info), + (u64) __pa(sn_irq_info)); + if (status) + BUG(); /* Cannot get platform pci device information */ + + /* Add pcidev_info to list in pci_controller.platform_data */ + list_add_tail(&pcidev_info->pdi_list, + &(SN_PLATFORM_DATA(dev->bus)->pcidev_info)); + + if (SN_ACPI_BASE_SUPPORT()) + sn_acpi_slot_fixup(dev, pcidev_info); + else + sn_more_slot_fixup(dev, pcidev_info); + /* + * Using the PROMs values for the PCI host bus, get the Linux + * PCI host_pci_dev struct and set up host bus linkages + */ + + bus_no = (pcidev_info->pdi_slot_host_handle >> 32) & 0xff; + devfn = pcidev_info->pdi_slot_host_handle & 0xffffffff; + host_pci_bus = pci_find_bus(segment, bus_no); + host_pci_dev = pci_get_slot(host_pci_bus, devfn); + + pcidev_info->host_pci_dev = host_pci_dev; + pcidev_info->pdi_linux_pcidev = dev; + pcidev_info->pdi_host_pcidev_info = SN_PCIDEV_INFO(host_pci_dev); + bs = SN_PCIBUS_BUSSOFT(dev->bus); + pcidev_info->pdi_pcibus_info = bs; + + if (bs && bs->bs_asic_type < PCIIO_ASIC_MAX_TYPES) { + SN_PCIDEV_BUSPROVIDER(dev) = sn_pci_provider[bs->bs_asic_type]; + } else { + SN_PCIDEV_BUSPROVIDER(dev) = &sn_pci_default_provider; + } + + /* Only set up IRQ stuff if this device has a host bus context */ + if (bs && sn_irq_info->irq_irq) { + pcidev_info->pdi_sn_irq_info = sn_irq_info; + dev->irq = pcidev_info->pdi_sn_irq_info->irq_irq; + sn_irq_fixup(dev, sn_irq_info); + } else { + pcidev_info->pdi_sn_irq_info = NULL; + kfree(sn_irq_info); + } +} + +/* + * sn_common_bus_fixup - Perform platform specific bus fixup. + * Execute the ASIC specific fixup routine + * for this bus. + */ +void +sn_common_bus_fixup(struct pci_bus *bus, + struct pcibus_bussoft *prom_bussoft_ptr) +{ + int cnode; + struct pci_controller *controller; + struct hubdev_info *hubdev_info; + int nasid; + void *provider_soft; + struct sn_pcibus_provider *provider; + struct sn_platform_data *sn_platform_data; + + controller = PCI_CONTROLLER(bus); + /* + * Per-provider fixup. Copies the bus soft structure from prom + * to local area and links SN_PCIBUS_BUSSOFT(). + */ + + if (prom_bussoft_ptr->bs_asic_type >= PCIIO_ASIC_MAX_TYPES) { + printk(KERN_WARNING "sn_common_bus_fixup: Unsupported asic type, %d", + prom_bussoft_ptr->bs_asic_type); + return; + } + + if (prom_bussoft_ptr->bs_asic_type == PCIIO_ASIC_TYPE_PPB) + return; /* no further fixup necessary */ + + provider = sn_pci_provider[prom_bussoft_ptr->bs_asic_type]; + if (provider == NULL) + panic("sn_common_bus_fixup: No provider registered for this asic type, %d", + prom_bussoft_ptr->bs_asic_type); + + if (provider->bus_fixup) + provider_soft = (*provider->bus_fixup) (prom_bussoft_ptr, + controller); + else + provider_soft = NULL; + + /* + * Generic bus fixup goes here. Don't reference prom_bussoft_ptr + * after this point. + */ + controller->platform_data = kzalloc(sizeof(struct sn_platform_data), + GFP_KERNEL); + if (controller->platform_data == NULL) + BUG(); + sn_platform_data = + (struct sn_platform_data *) controller->platform_data; + sn_platform_data->provider_soft = provider_soft; + INIT_LIST_HEAD(&((struct sn_platform_data *) + controller->platform_data)->pcidev_info); + nasid = NASID_GET(SN_PCIBUS_BUSSOFT(bus)->bs_base); + cnode = nasid_to_cnodeid(nasid); + hubdev_info = (struct hubdev_info *)(NODEPDA(cnode)->pdinfo); + SN_PCIBUS_BUSSOFT(bus)->bs_xwidget_info = + &(hubdev_info->hdi_xwidget_info[SN_PCIBUS_BUSSOFT(bus)->bs_xid]); + + /* + * If the node information we obtained during the fixup phase is + * invalid then set controller->node to -1 (undetermined) + */ + if (controller->node >= num_online_nodes()) { + struct pcibus_bussoft *b = SN_PCIBUS_BUSSOFT(bus); + + printk(KERN_WARNING "Device ASIC=%u XID=%u PBUSNUM=%u" + "L_IO=%lx L_MEM=%lx BASE=%lx\n", + b->bs_asic_type, b->bs_xid, b->bs_persist_busnum, + b->bs_legacy_io, b->bs_legacy_mem, b->bs_base); + printk(KERN_WARNING "on node %d but only %d nodes online." + "Association set to undetermined.\n", + controller->node, num_online_nodes()); + controller->node = -1; + } +} + +void sn_bus_store_sysdata(struct pci_dev *dev) +{ + struct sysdata_el *element; + + element = kzalloc(sizeof(struct sysdata_el), GFP_KERNEL); + if (!element) { + dev_dbg(dev, "%s: out of memory!\n", __FUNCTION__); + return; + } + element->sysdata = SN_PCIDEV_INFO(dev); + list_add(&element->entry, &sn_sysdata_list); +} + +void sn_bus_free_sysdata(void) +{ + struct sysdata_el *element; + struct list_head *list, *safe; + + list_for_each_safe(list, safe, &sn_sysdata_list) { + element = list_entry(list, struct sysdata_el, entry); + list_del(&element->entry); + list_del(&(((struct pcidev_info *) + (element->sysdata))->pdi_list)); + kfree(element->sysdata); + kfree(element); + } + return; +} + +/* + * hubdev_init_node() - Creates the HUB data structure and link them to it's + * own NODE specific data area. + */ +void hubdev_init_node(nodepda_t * npda, cnodeid_t node) +{ + struct hubdev_info *hubdev_info; + int size; + pg_data_t *pg; + + size = sizeof(struct hubdev_info); + + if (node >= num_online_nodes()) /* Headless/memless IO nodes */ + pg = NODE_DATA(0); + else + pg = NODE_DATA(node); + + hubdev_info = (struct hubdev_info *)alloc_bootmem_node(pg, size); + + npda->pdinfo = (void *)hubdev_info; +} + +geoid_t +cnodeid_get_geoid(cnodeid_t cnode) +{ + struct hubdev_info *hubdev; + + hubdev = (struct hubdev_info *)(NODEPDA(cnode)->pdinfo); + return hubdev->hdi_geoid; +} + +void sn_generate_path(struct pci_bus *pci_bus, char *address) +{ + nasid_t nasid; + cnodeid_t cnode; + geoid_t geoid; + moduleid_t moduleid; + u16 bricktype; + + nasid = NASID_GET(SN_PCIBUS_BUSSOFT(pci_bus)->bs_base); + cnode = nasid_to_cnodeid(nasid); + geoid = cnodeid_get_geoid(cnode); + moduleid = geo_module(geoid); + + sprintf(address, "module_%c%c%c%c%.2d", + '0'+RACK_GET_CLASS(MODULE_GET_RACK(moduleid)), + '0'+RACK_GET_GROUP(MODULE_GET_RACK(moduleid)), + '0'+RACK_GET_NUM(MODULE_GET_RACK(moduleid)), + MODULE_GET_BTCHAR(moduleid), MODULE_GET_BPOS(moduleid)); + + /* Tollhouse requires slot id to be displayed */ + bricktype = MODULE_GET_BTYPE(moduleid); + if ((bricktype == L1_BRICKTYPE_191010) || + (bricktype == L1_BRICKTYPE_1932)) + sprintf(address, "%s^%d", address, geo_slot(geoid)); +} + +/* + * sn_pci_fixup_bus() - Perform SN specific setup of software structs + * (pcibus_bussoft, pcidev_info) and hardware + * registers, for the specified bus and devices under it. + */ +void __devinit +sn_pci_fixup_bus(struct pci_bus *bus) +{ + + if (SN_ACPI_BASE_SUPPORT()) + sn_acpi_bus_fixup(bus); + else + sn_bus_fixup(bus); +} + +/* + * sn_io_early_init - Perform early IO (and some non-IO) initialization. + * In particular, setup the sn_pci_provider[] array. + * This needs to be done prior to any bus scanning + * (acpi_scan_init()) in the ACPI case, as the SN + * bus fixup code will reference the array. + */ +static int __init +sn_io_early_init(void) +{ + int i; + + if (!ia64_platform_is("sn2") || IS_RUNNING_ON_FAKE_PROM()) + return 0; + + /* + * prime sn_pci_provider[]. Individial provider init routines will + * override their respective default entries. + */ + + for (i = 0; i < PCIIO_ASIC_MAX_TYPES; i++) + sn_pci_provider[i] = &sn_pci_default_provider; + + pcibr_init_provider(); + tioca_init_provider(); + tioce_init_provider(); + + /* + * This is needed to avoid bounce limit checks in the blk layer + */ + ia64_max_iommu_merge_mask = ~PAGE_MASK; + + sn_irq_lh_init(); + INIT_LIST_HEAD(&sn_sysdata_list); + sn_init_cpei_timer(); + +#ifdef CONFIG_PROC_FS + register_sn_procfs(); +#endif + + printk(KERN_INFO "ACPI DSDT OEM Rev 0x%x\n", + acpi_gbl_DSDT->oem_revision); + if (SN_ACPI_BASE_SUPPORT()) + sn_io_acpi_init(); + else + sn_io_init(); + return 0; +} + +arch_initcall(sn_io_early_init); + +/* + * sn_io_late_init() - Perform any final platform specific IO initialization. + */ + +int __init +sn_io_late_init(void) +{ + struct pci_bus *bus; + struct pcibus_bussoft *bussoft; + cnodeid_t cnode; + nasid_t nasid; + cnodeid_t near_cnode; + + if (!ia64_platform_is("sn2") || IS_RUNNING_ON_FAKE_PROM()) + return 0; + + /* + * Setup closest node in pci_controller->node for + * PIC, TIOCP, TIOCE (TIOCA does it during bus fixup using + * info from the PROM). + */ + bus = NULL; + while ((bus = pci_find_next_bus(bus)) != NULL) { + bussoft = SN_PCIBUS_BUSSOFT(bus); + nasid = NASID_GET(bussoft->bs_base); + cnode = nasid_to_cnodeid(nasid); + if ((bussoft->bs_asic_type == PCIIO_ASIC_TYPE_TIOCP) || + (bussoft->bs_asic_type == PCIIO_ASIC_TYPE_TIOCE)) { + /* TIO PCI Bridge: find nearest node with CPUs */ + int e = sn_hwperf_get_nearest_node(cnode, NULL, + &near_cnode); + if (e < 0) { + near_cnode = (cnodeid_t)-1; /* use any node */ + printk(KERN_WARNING "pcibr_bus_fixup: failed " + "to find near node with CPUs to TIO " + "node %d, err=%d\n", cnode, e); + } + PCI_CONTROLLER(bus)->node = near_cnode; + } else if (bussoft->bs_asic_type == PCIIO_ASIC_TYPE_PIC) { + PCI_CONTROLLER(bus)->node = cnode; + } + } + + sn_ioif_inited = 1; /* SN I/O infrastructure now initialized */ + + return 0; +} + +fs_initcall(sn_io_late_init); + +EXPORT_SYMBOL(sn_pci_fixup_slot); +EXPORT_SYMBOL(sn_pci_unfixup_slot); +EXPORT_SYMBOL(sn_bus_store_sysdata); +EXPORT_SYMBOL(sn_bus_free_sysdata); +EXPORT_SYMBOL(sn_generate_path); + diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c index dc09a6a28a3..9ad843e0383 100644 --- a/arch/ia64/sn/kernel/io_init.c +++ b/arch/ia64/sn/kernel/io_init.c @@ -3,103 +3,28 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 1992 - 1997, 2000-2006 Silicon Graphics, Inc. All rights reserved. */ -#include <linux/bootmem.h> -#include <linux/nodemask.h> #include <asm/sn/types.h> #include <asm/sn/addrs.h> -#include <asm/sn/sn_feature_sets.h> -#include <asm/sn/geo.h> #include <asm/sn/io.h> -#include <asm/sn/l1.h> #include <asm/sn/module.h> -#include <asm/sn/pcibr_provider.h> +#include <asm/sn/intr.h> #include <asm/sn/pcibus_provider_defs.h> #include <asm/sn/pcidev.h> -#include <asm/sn/simulator.h> #include <asm/sn/sn_sal.h> -#include <asm/sn/tioca_provider.h> -#include <asm/sn/tioce_provider.h> #include "xtalk/hubdev.h" -#include "xtalk/xwidgetdev.h" - - -extern void sn_init_cpei_timer(void); -extern void register_sn_procfs(void); - -static struct list_head sn_sysdata_list; - -/* sysdata list struct */ -struct sysdata_el { - struct list_head entry; - void *sysdata; -}; - -struct slab_info { - struct hubdev_info hubdev; -}; - -struct brick { - moduleid_t id; /* Module ID of this module */ - struct slab_info slab_info[MAX_SLABS + 1]; -}; - -int sn_ioif_inited; /* SN I/O infrastructure initialized? */ - -struct sn_pcibus_provider *sn_pci_provider[PCIIO_ASIC_MAX_TYPES]; /* indexed by asic type */ - -static int max_segment_number; /* Default highest segment number */ -static int max_pcibus_number = 255; /* Default highest pci bus number */ /* - * Hooks and struct for unsupported pci providers + * The code in this file will only be executed when running with + * a PROM that does _not_ have base ACPI IO support. + * (i.e., SN_ACPI_BASE_SUPPORT() == 0) */ -static dma_addr_t -sn_default_pci_map(struct pci_dev *pdev, unsigned long paddr, size_t size, int type) -{ - return 0; -} - -static void -sn_default_pci_unmap(struct pci_dev *pdev, dma_addr_t addr, int direction) -{ - return; -} - -static void * -sn_default_pci_bus_fixup(struct pcibus_bussoft *soft, struct pci_controller *controller) -{ - return NULL; -} - -static struct sn_pcibus_provider sn_pci_default_provider = { - .dma_map = sn_default_pci_map, - .dma_map_consistent = sn_default_pci_map, - .dma_unmap = sn_default_pci_unmap, - .bus_fixup = sn_default_pci_bus_fixup, -}; - -/* - * Retrieve the DMA Flush List given nasid, widget, and device. - * This list is needed to implement the WAR - Flush DMA data on PIO Reads. - */ -static inline u64 -sal_get_device_dmaflush_list(u64 nasid, u64 widget_num, u64 device_num, - u64 address) -{ - struct ia64_sal_retval ret_stuff; - ret_stuff.status = 0; - ret_stuff.v0 = 0; +static int max_segment_number; /* Default highest segment number */ +static int max_pcibus_number = 255; /* Default highest pci bus number */ - SAL_CALL_NOLOCK(ret_stuff, - (u64) SN_SAL_IOIF_GET_DEVICE_DMAFLUSH_LIST, - (u64) nasid, (u64) widget_num, - (u64) device_num, (u64) address, 0, 0, 0); - return ret_stuff.status; -} /* * Retrieve the hub device info structure for the given nasid. @@ -131,93 +56,20 @@ static inline u64 sal_get_pcibus_info(u64 segment, u64 busnum, u64 address) return ret_stuff.v0; } -/* - * Retrieve the pci device information given the bus and device|function number. - */ -static inline u64 -sal_get_pcidev_info(u64 segment, u64 bus_number, u64 devfn, u64 pci_dev, - u64 sn_irq_info) -{ - struct ia64_sal_retval ret_stuff; - ret_stuff.status = 0; - ret_stuff.v0 = 0; - - SAL_CALL_NOLOCK(ret_stuff, - (u64) SN_SAL_IOIF_GET_PCIDEV_INFO, - (u64) segment, (u64) bus_number, (u64) devfn, - (u64) pci_dev, - sn_irq_info, 0, 0); - return ret_stuff.v0; -} - -/* - * sn_pcidev_info_get() - Retrieve the pcidev_info struct for the specified - * device. - */ -inline struct pcidev_info * -sn_pcidev_info_get(struct pci_dev *dev) -{ - struct pcidev_info *pcidev; - - list_for_each_entry(pcidev, - &(SN_PCI_CONTROLLER(dev)->pcidev_info), pdi_list) { - if (pcidev->pdi_linux_pcidev == dev) { - return pcidev; - } - } - return NULL; -} - -/* Older PROM flush WAR - * - * 01/16/06 -- This war will be in place until a new official PROM is released. - * Additionally note that the struct sn_flush_device_war also has to be - * removed from arch/ia64/sn/include/xtalk/hubdev.h - */ -static u8 war_implemented = 0; - -static s64 sn_device_fixup_war(u64 nasid, u64 widget, int device, - struct sn_flush_device_common *common) -{ - struct sn_flush_device_war *war_list; - struct sn_flush_device_war *dev_entry; - struct ia64_sal_retval isrv = {0,0,0,0}; - - if (!war_implemented) { - printk(KERN_WARNING "PROM version < 4.50 -- implementing old " - "PROM flush WAR\n"); - war_implemented = 1; - } - - war_list = kzalloc(DEV_PER_WIDGET * sizeof(*war_list), GFP_KERNEL); - if (!war_list) - BUG(); - - SAL_CALL_NOLOCK(isrv, SN_SAL_IOIF_GET_WIDGET_DMAFLUSH_LIST, - nasid, widget, __pa(war_list), 0, 0, 0 ,0); - if (isrv.status) - panic("sn_device_fixup_war failed: %s\n", - ia64_sal_strerror(isrv.status)); - - dev_entry = war_list + device; - memcpy(common,dev_entry, sizeof(*common)); - kfree(war_list); - - return isrv.status; -} /* - * sn_fixup_ionodes() - This routine initializes the HUB data strcuture for - * each node in the system. + * sn_fixup_ionodes() - This routine initializes the HUB data structure for + * each node in the system. This function is only + * executed when running with a non-ACPI capable PROM. */ static void __init sn_fixup_ionodes(void) { - struct sn_flush_device_kernel *sn_flush_device_kernel; - struct sn_flush_device_kernel *dev_entry; + struct hubdev_info *hubdev; u64 status; u64 nasid; - int i, widget, device, size; + int i; + extern void sn_common_hubdev_init(struct hubdev_info *); /* * Get SGI Specific HUB chipset information. @@ -240,70 +92,47 @@ static void __init sn_fixup_ionodes(void) max_segment_number = hubdev->max_segment_number; max_pcibus_number = hubdev->max_pcibus_number; } + sn_common_hubdev_init(hubdev); + } +} - /* Attach the error interrupt handlers */ - if (nasid & 1) - ice_error_init(hubdev); - else - hub_error_init(hubdev); - - for (widget = 0; widget <= HUB_WIDGET_ID_MAX; widget++) - hubdev->hdi_xwidget_info[widget].xwi_hubinfo = hubdev; - - if (!hubdev->hdi_flush_nasid_list.widget_p) - continue; - - size = (HUB_WIDGET_ID_MAX + 1) * - sizeof(struct sn_flush_device_kernel *); - hubdev->hdi_flush_nasid_list.widget_p = - kzalloc(size, GFP_KERNEL); - if (!hubdev->hdi_flush_nasid_list.widget_p) +/* + * sn_pci_legacy_window_fixup - Create PCI controller windows for + * legacy IO and MEM space. This needs to + * be done here, as the PROM does not have + * ACPI support defining the root buses + * and their resources (_CRS), + */ +static void +sn_legacy_pci_window_fixup(struct pci_controller *controller, + u64 legacy_io, u64 legacy_mem) +{ + controller->window = kcalloc(2, sizeof(struct pci_window), + GFP_KERNEL); + if (controller->window == NULL) BUG(); - - for (widget = 0; widget <= HUB_WIDGET_ID_MAX; widget++) { - size = DEV_PER_WIDGET * - sizeof(struct sn_flush_device_kernel); - sn_flush_device_kernel = kzalloc(size, GFP_KERNEL); - if (!sn_flush_device_kernel) - BUG(); - - dev_entry = sn_flush_device_kernel; - for (device = 0; device < DEV_PER_WIDGET; - device++,dev_entry++) { - size = sizeof(struct sn_flush_device_common); - dev_entry->common = kzalloc(size, GFP_KERNEL); - if (!dev_entry->common) - BUG(); - - if (sn_prom_feature_available( - PRF_DEVICE_FLUSH_LIST)) - status = sal_get_device_dmaflush_list( - nasid, widget, device, - (u64)(dev_entry->common)); - else - status = sn_device_fixup_war(nasid, - widget, device, - dev_entry->common); - if (status != SALRET_OK) - panic("SAL call failed: %s\n", - ia64_sal_strerror(status)); - - spin_lock_init(&dev_entry->sfdl_flush_lock); - } - - if (sn_flush_device_kernel) - hubdev->hdi_flush_nasid_list.widget_p[widget] = - sn_flush_device_kernel; - } - } + controller->window[0].offset = legacy_io; + controller->window[0].resource.name = "legacy_io"; + controller->window[0].resource.flags = IORESOURCE_IO; + controller->window[0].resource.start = legacy_io; + controller->window[0].resource.end = + controller->window[0].resource.start + 0xffff; + controller->window[0].resource.parent = &ioport_resource; + controller->window[1].offset = legacy_mem; + controller->window[1].resource.name = "legacy_mem"; + controller->window[1].resource.flags = IORESOURCE_MEM; + controller->window[1].resource.start = legacy_mem; + controller->window[1].resource.end = + controller->window[1].resource.start + (1024 * 1024) - 1; + controller->window[1].resource.parent = &iomem_resource; + controller->windows = 2; } /* * sn_pci_window_fixup() - Create a pci_window for each device resource. - * Until ACPI support is added, we need this code - * to setup pci_windows for use by - * pcibios_bus_to_resource(), - * pcibios_resource_to_bus(), etc. + * It will setup pci_windows for use by + * pcibios_bus_to_resource(), pcibios_resource_to_bus(), + * etc. */ static void sn_pci_window_fixup(struct pci_dev *dev, unsigned int count, @@ -342,60 +171,22 @@ sn_pci_window_fixup(struct pci_dev *dev, unsigned int count, controller->window = new_window; } -void sn_pci_unfixup_slot(struct pci_dev *dev) -{ - struct pci_dev *host_pci_dev = SN_PCIDEV_INFO(dev)->host_pci_dev; - - sn_irq_unfixup(dev); - pci_dev_put(host_pci_dev); - pci_dev_put(dev); -} - /* - * sn_pci_fixup_slot() - This routine sets up a slot's resources - * consistent with the Linux PCI abstraction layer. Resources acquired - * from our PCI provider include PIO maps to BAR space and interrupt - * objects. + * sn_more_slot_fixup() - We are not running with an ACPI capable PROM, + * and need to convert the pci_dev->resource + * 'start' and 'end' addresses to mapped addresses, + * and setup the pci_controller->window array entries. */ -void sn_pci_fixup_slot(struct pci_dev *dev) +void +sn_more_slot_fixup(struct pci_dev *dev, struct pcidev_info *pcidev_info) { unsigned int count = 0; int idx; - int segment = pci_domain_nr(dev->bus); - int status = 0; - struct pcibus_bussoft *bs; - struct pci_bus *host_pci_bus; - struct pci_dev *host_pci_dev; - struct pcidev_info *pcidev_info; s64 pci_addrs[PCI_ROM_RESOURCE + 1]; - struct sn_irq_info *sn_irq_info; - unsigned long size; - unsigned int bus_no, devfn; - - pci_dev_get(dev); /* for the sysdata pointer */ - pcidev_info = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL); - if (!pcidev_info) - BUG(); /* Cannot afford to run out of memory */ - - sn_irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL); - if (!sn_irq_info) - BUG(); /* Cannot afford to run out of memory */ - - /* Call to retrieve pci device information needed by kernel. */ - status = sal_get_pcidev_info((u64) segment, (u64) dev->bus->number, - dev->devfn, - (u64) __pa(pcidev_info), - (u64) __pa(sn_irq_info)); - if (status) - BUG(); /* Cannot get platform pci device information */ - - /* Add pcidev_info to list in sn_pci_controller struct */ - list_add_tail(&pcidev_info->pdi_list, - &(SN_PCI_CONTROLLER(dev->bus)->pcidev_info)); + unsigned long addr, end, size, start; /* Copy over PIO Mapped Addresses */ for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) { - unsigned long start, end, addr; if (!pcidev_info->pdi_pio_mapped_addr[idx]) { pci_addrs[idx] = -1; @@ -419,60 +210,28 @@ void sn_pci_fixup_slot(struct pci_dev *dev) dev->resource[idx].parent = &ioport_resource; else dev->resource[idx].parent = &iomem_resource; + /* If ROM, mark as shadowed in PROM */ + if (idx == PCI_ROM_RESOURCE) + dev->resource[idx].flags |= IORESOURCE_ROM_BIOS_COPY; } /* Create a pci_window in the pci_controller struct for * each device resource. */ if (count > 0) sn_pci_window_fixup(dev, count, pci_addrs); - - /* - * Using the PROMs values for the PCI host bus, get the Linux - * PCI host_pci_dev struct and set up host bus linkages - */ - - bus_no = (pcidev_info->pdi_slot_host_handle >> 32) & 0xff; - devfn = pcidev_info->pdi_slot_host_handle & 0xffffffff; - host_pci_bus = pci_find_bus(segment, bus_no); - host_pci_dev = pci_get_slot(host_pci_bus, devfn); - - pcidev_info->host_pci_dev = host_pci_dev; - pcidev_info->pdi_linux_pcidev = dev; - pcidev_info->pdi_host_pcidev_info = SN_PCIDEV_INFO(host_pci_dev); - bs = SN_PCIBUS_BUSSOFT(dev->bus); - pcidev_info->pdi_pcibus_info = bs; - - if (bs && bs->bs_asic_type < PCIIO_ASIC_MAX_TYPES) { - SN_PCIDEV_BUSPROVIDER(dev) = sn_pci_provider[bs->bs_asic_type]; - } else { - SN_PCIDEV_BUSPROVIDER(dev) = &sn_pci_default_provider; - } - - /* Only set up IRQ stuff if this device has a host bus context */ - if (bs && sn_irq_info->irq_irq) { - pcidev_info->pdi_sn_irq_info = sn_irq_info; - dev->irq = pcidev_info->pdi_sn_irq_info->irq_irq; - sn_irq_fixup(dev, sn_irq_info); - } else { - pcidev_info->pdi_sn_irq_info = NULL; - kfree(sn_irq_info); - } } /* * sn_pci_controller_fixup() - This routine sets up a bus's resources - * consistent with the Linux PCI abstraction layer. + * consistent with the Linux PCI abstraction layer. */ -void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus) +static void +sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus) { - int status; - int nasid, cnode; + s64 status = 0; struct pci_controller *controller; - struct sn_pci_controller *sn_controller; struct pcibus_bussoft *prom_bussoft_ptr; - struct hubdev_info *hubdev_info; - void *provider_soft; - struct sn_pcibus_provider *provider; + status = sal_get_pcibus_info((u64) segment, (u64) busnum, (u64) ia64_tpa(&prom_bussoft_ptr)); @@ -480,261 +239,77 @@ void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus) return; /*bus # does not exist */ prom_bussoft_ptr = __va(prom_bussoft_ptr); - /* Allocate a sn_pci_controller, which has a pci_controller struct - * as the first member. - */ - sn_controller = kzalloc(sizeof(struct sn_pci_controller), GFP_KERNEL); - if (!sn_controller) + controller = kzalloc(sizeof(*controller), GFP_KERNEL); + if (!controller) BUG(); - INIT_LIST_HEAD(&sn_controller->pcidev_info); - controller = &sn_controller->pci_controller; controller->segment = segment; - if (bus == NULL) { - bus = pci_scan_bus(busnum, &pci_root_ops, controller); - if (bus == NULL) - goto error_return; /* error, or bus already scanned */ - bus->sysdata = NULL; - } - - if (bus->sysdata) - goto error_return; /* sysdata already alloc'd */ - /* - * Per-provider fixup. Copies the contents from prom to local - * area and links SN_PCIBUS_BUSSOFT(). + * Temporarily save the prom_bussoft_ptr for use by sn_bus_fixup(). + * (platform_data will be overwritten later in sn_common_bus_fixup()) */ + controller->platform_data = prom_bussoft_ptr; - if (prom_bussoft_ptr->bs_asic_type >= PCIIO_ASIC_MAX_TYPES) - goto error_return; /* unsupported asic type */ - - if (prom_bussoft_ptr->bs_asic_type == PCIIO_ASIC_TYPE_PPB) - goto error_return; /* no further fixup necessary */ - - provider = sn_pci_provider[prom_bussoft_ptr->bs_asic_type]; - if (provider == NULL) - goto error_return; /* no provider registerd for this asic */ + bus = pci_scan_bus(busnum, &pci_root_ops, controller); + if (bus == NULL) + goto error_return; /* error, or bus already scanned */ bus->sysdata = controller; - if (provider->bus_fixup) - provider_soft = (*provider->bus_fixup) (prom_bussoft_ptr, controller); - else - provider_soft = NULL; - - if (provider_soft == NULL) { - /* fixup failed or not applicable */ - bus->sysdata = NULL; - goto error_return; - } - - /* - * Setup pci_windows for legacy IO and MEM space. - * (Temporary until ACPI support is in place.) - */ - controller->window = kcalloc(2, sizeof(struct pci_window), GFP_KERNEL); - if (controller->window == NULL) - BUG(); - controller->window[0].offset = prom_bussoft_ptr->bs_legacy_io; - controller->window[0].resource.name = "legacy_io"; - controller->window[0].resource.flags = IORESOURCE_IO; - controller->window[0].resource.start = prom_bussoft_ptr->bs_legacy_io; - controller->window[0].resource.end = - controller->window[0].resource.start + 0xffff; - controller->window[0].resource.parent = &ioport_resource; - controller->window[1].offset = prom_bussoft_ptr->bs_legacy_mem; - controller->window[1].resource.name = "legacy_mem"; - controller->window[1].resource.flags = IORESOURCE_MEM; - controller->window[1].resource.start = prom_bussoft_ptr->bs_legacy_mem; - controller->window[1].resource.end = - controller->window[1].resource.start + (1024 * 1024) - 1; - controller->window[1].resource.parent = &iomem_resource; - controller->windows = 2; - - /* - * Generic bus fixup goes here. Don't reference prom_bussoft_ptr - * after this point. - */ - - PCI_CONTROLLER(bus)->platform_data = provider_soft; - nasid = NASID_GET(SN_PCIBUS_BUSSOFT(bus)->bs_base); - cnode = nasid_to_cnodeid(nasid); - hubdev_info = (struct hubdev_info *)(NODEPDA(cnode)->pdinfo); - SN_PCIBUS_BUSSOFT(bus)->bs_xwidget_info = - &(hubdev_info->hdi_xwidget_info[SN_PCIBUS_BUSSOFT(bus)->bs_xid]); - /* - * If the node information we obtained during the fixup phase is invalid - * then set controller->node to -1 (undetermined) - */ - if (controller->node >= num_online_nodes()) { - struct pcibus_bussoft *b = SN_PCIBUS_BUSSOFT(bus); - - printk(KERN_WARNING "Device ASIC=%u XID=%u PBUSNUM=%u" - "L_IO=%lx L_MEM=%lx BASE=%lx\n", - b->bs_asic_type, b->bs_xid, b->bs_persist_busnum, - b->bs_legacy_io, b->bs_legacy_mem, b->bs_base); - printk(KERN_WARNING "on node %d but only %d nodes online." - "Association set to undetermined.\n", - controller->node, num_online_nodes()); - controller->node = -1; - } return; error_return: - kfree(sn_controller); + kfree(controller); return; } -void sn_bus_store_sysdata(struct pci_dev *dev) +/* + * sn_bus_fixup + */ +void +sn_bus_fixup(struct pci_bus *bus) { - struct sysdata_el *element; - - element = kzalloc(sizeof(struct sysdata_el), GFP_KERNEL); - if (!element) { - dev_dbg(dev, "%s: out of memory!\n", __FUNCTION__); - return; - } - element->sysdata = SN_PCIDEV_INFO(dev); - list_add(&element->entry, &sn_sysdata_list); -} + struct pci_dev *pci_dev = NULL; + struct pcibus_bussoft *prom_bussoft_ptr; + extern void sn_common_bus_fixup(struct pci_bus *, + struct pcibus_bussoft *); + + + if (!bus->parent) { /* If root bus */ + prom_bussoft_ptr = PCI_CONTROLLER(bus)->platform_data; + if (prom_bussoft_ptr == NULL) { + printk(KERN_ERR + "sn_bus_fixup: 0x%04x:0x%02x Unable to " + "obtain prom_bussoft_ptr\n", + pci_domain_nr(bus), bus->number); + return; + } + sn_common_bus_fixup(bus, prom_bussoft_ptr); + sn_legacy_pci_window_fixup(PCI_CONTROLLER(bus), + prom_bussoft_ptr->bs_legacy_io, + prom_bussoft_ptr->bs_legacy_mem); + } + list_for_each_entry(pci_dev, &bus->devices, bus_list) { + sn_pci_fixup_slot(pci_dev); + } -void sn_bus_free_sysdata(void) -{ - struct sysdata_el *element; - struct list_head *list, *safe; - - list_for_each_safe(list, safe, &sn_sysdata_list) { - element = list_entry(list, struct sysdata_el, entry); - list_del(&element->entry); - list_del(&(((struct pcidev_info *) - (element->sysdata))->pdi_list)); - kfree(element->sysdata); - kfree(element); - } - return; } /* - * Ugly hack to get PCI setup until we have a proper ACPI namespace. + * sn_io_init - PROM does not have ACPI support to define nodes or root buses, + * so we need to do things the hard way, including initiating the + * bus scanning ourselves. */ -#define PCI_BUSES_TO_SCAN 256 - -static int __init sn_pci_init(void) +void __init sn_io_init(void) { int i, j; - struct pci_dev *pci_dev = NULL; - - if (!ia64_platform_is("sn2") || IS_RUNNING_ON_FAKE_PROM()) - return 0; - - /* - * prime sn_pci_provider[]. Individial provider init routines will - * override their respective default entries. - */ - - for (i = 0; i < PCIIO_ASIC_MAX_TYPES; i++) - sn_pci_provider[i] = &sn_pci_default_provider; - pcibr_init_provider(); - tioca_init_provider(); - tioce_init_provider(); - - /* - * This is needed to avoid bounce limit checks in the blk layer - */ - ia64_max_iommu_merge_mask = ~PAGE_MASK; sn_fixup_ionodes(); - sn_irq_lh_init(); - INIT_LIST_HEAD(&sn_sysdata_list); - sn_init_cpei_timer(); - -#ifdef CONFIG_PROC_FS - register_sn_procfs(); -#endif /* busses are not known yet ... */ for (i = 0; i <= max_segment_number; i++) for (j = 0; j <= max_pcibus_number; j++) sn_pci_controller_fixup(i, j, NULL); - - /* - * Generic Linux PCI Layer has created the pci_bus and pci_dev - * structures - time for us to add our SN PLatform specific - * information. - */ - - while ((pci_dev = - pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pci_dev)) != NULL) - sn_pci_fixup_slot(pci_dev); - - sn_ioif_inited = 1; /* sn I/O infrastructure now initialized */ - - return 0; -} - -/* - * hubdev_init_node() - Creates the HUB data structure and link them to it's - * own NODE specific data area. - */ -void hubdev_init_node(nodepda_t * npda, cnodeid_t node) -{ - struct hubdev_info *hubdev_info; - int size; - pg_data_t *pg; - - size = sizeof(struct hubdev_info); - - if (node >= num_online_nodes()) /* Headless/memless IO nodes */ - pg = NODE_DATA(0); - else - pg = NODE_DATA(node); - - hubdev_info = (struct hubdev_info *)alloc_bootmem_node(pg, size); - - npda->pdinfo = (void *)hubdev_info; } - -geoid_t -cnodeid_get_geoid(cnodeid_t cnode) -{ - struct hubdev_info *hubdev; - - hubdev = (struct hubdev_info *)(NODEPDA(cnode)->pdinfo); - return hubdev->hdi_geoid; -} - -void sn_generate_path(struct pci_bus *pci_bus, char *address) -{ - nasid_t nasid; - cnodeid_t cnode; - geoid_t geoid; - moduleid_t moduleid; - u16 bricktype; - - nasid = NASID_GET(SN_PCIBUS_BUSSOFT(pci_bus)->bs_base); - cnode = nasid_to_cnodeid(nasid); - geoid = cnodeid_get_geoid(cnode); - moduleid = geo_module(geoid); - - sprintf(address, "module_%c%c%c%c%.2d", - '0'+RACK_GET_CLASS(MODULE_GET_RACK(moduleid)), - '0'+RACK_GET_GROUP(MODULE_GET_RACK(moduleid)), - '0'+RACK_GET_NUM(MODULE_GET_RACK(moduleid)), - MODULE_GET_BTCHAR(moduleid), MODULE_GET_BPOS(moduleid)); - - /* Tollhouse requires slot id to be displayed */ - bricktype = MODULE_GET_BTYPE(moduleid); - if ((bricktype == L1_BRICKTYPE_191010) || - (bricktype == L1_BRICKTYPE_1932)) - sprintf(address, "%s^%d", address, geo_slot(geoid)); -} - -subsys_initcall(sn_pci_init); -EXPORT_SYMBOL(sn_pci_fixup_slot); -EXPORT_SYMBOL(sn_pci_unfixup_slot); -EXPORT_SYMBOL(sn_pci_controller_fixup); -EXPORT_SYMBOL(sn_bus_store_sysdata); -EXPORT_SYMBOL(sn_bus_free_sysdata); -EXPORT_SYMBOL(sn_generate_path); diff --git a/arch/ia64/sn/kernel/iomv.c b/arch/ia64/sn/kernel/iomv.c index 7ce3cdad627..4aa4f301d56 100644 --- a/arch/ia64/sn/kernel/iomv.c +++ b/arch/ia64/sn/kernel/iomv.c @@ -3,10 +3,11 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2000-2003 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 2000-2003, 2006 Silicon Graphics, Inc. All rights reserved. */ #include <linux/module.h> +#include <linux/acpi.h> #include <asm/io.h> #include <asm/delay.h> #include <asm/vga.h> @@ -15,6 +16,7 @@ #include <asm/sn/pda.h> #include <asm/sn/sn_cpuid.h> #include <asm/sn/shub_mmr.h> +#include <asm/sn/acpi.h> #define IS_LEGACY_VGA_IOPORT(p) \ (((p) >= 0x3b0 && (p) <= 0x3bb) || ((p) >= 0x3c0 && (p) <= 0x3df)) @@ -31,11 +33,14 @@ void *sn_io_addr(unsigned long port) { if (!IS_RUNNING_ON_SIMULATOR()) { if (IS_LEGACY_VGA_IOPORT(port)) - port += vga_console_iobase; + return (__ia64_mk_io_addr(port)); /* On sn2, legacy I/O ports don't point at anything */ if (port < (64 * 1024)) return NULL; - return ((void *)(port | __IA64_UNCACHED_OFFSET)); + if (SN_ACPI_BASE_SUPPORT()) + return (__ia64_mk_io_addr(port)); + else + return ((void *)(port | __IA64_UNCACHED_OFFSET)); } else { /* but the simulator uses them... */ unsigned long addr; diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index 7a2d824c5ce..1d009f93244 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -388,6 +388,14 @@ void __init sn_setup(char **cmdline_p) ia64_sn_plat_set_error_handling_features(); // obsolete ia64_sn_set_os_feature(OSF_MCA_SLV_TO_OS_INIT_SLV); ia64_sn_set_os_feature(OSF_FEAT_LOG_SBES); + /* + * Note: The calls to notify the PROM of ACPI and PCI Segment + * support must be done prior to acpi_load_tables(), as + * an ACPI capable PROM will rebuild the DSDT as result + * of the call. + */ + ia64_sn_set_os_feature(OSF_PCISEGMENT_ENABLE); + ia64_sn_set_os_feature(OSF_ACPI_ENABLE); #if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) @@ -413,6 +421,16 @@ void __init sn_setup(char **cmdline_p) if (! vga_console_membase) sn_scan_pcdp(); + /* + * Setup legacy IO space. + * vga_console_iobase maps to PCI IO Space address 0 on the + * bus containing the VGA console. + */ + if (vga_console_iobase) { + io_space[0].mmio_base = vga_console_iobase; + io_space[0].sparse = 0; + } + if (vga_console_membase) { /* usable vga ... make tty0 the preferred default console */ if (!strstr(*cmdline_p, "console=")) diff --git a/arch/ia64/sn/kernel/tiocx.c b/arch/ia64/sn/kernel/tiocx.c index feaf1a6e810..493380b2c05 100644 --- a/arch/ia64/sn/kernel/tiocx.c +++ b/arch/ia64/sn/kernel/tiocx.c @@ -552,7 +552,7 @@ static void __exit tiocx_exit(void) bus_unregister(&tiocx_bus_type); } -subsys_initcall(tiocx_init); +fs_initcall(tiocx_init); module_exit(tiocx_exit); /************************************************************************ diff --git a/arch/ia64/sn/pci/pcibr/pcibr_provider.c b/arch/ia64/sn/pci/pcibr/pcibr_provider.c index 27dd7df0f44..6846dc9b432 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_provider.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_provider.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2001-2004 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 2001-2004, 2006 Silicon Graphics, Inc. All rights reserved. */ #include <linux/interrupt.h> @@ -109,7 +109,6 @@ void * pcibr_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *controller) { int nasid, cnode, j; - cnodeid_t near_cnode; struct hubdev_info *hubdev_info; struct pcibus_info *soft; struct sn_flush_device_kernel *sn_flush_device_kernel; @@ -186,20 +185,6 @@ pcibr_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont return NULL; } - if (prom_bussoft->bs_asic_type == PCIIO_ASIC_TYPE_TIOCP) { - /* TIO PCI Bridge: find nearest node with CPUs */ - int e = sn_hwperf_get_nearest_node(cnode, NULL, &near_cnode); - - if (e < 0) { - near_cnode = (cnodeid_t)-1; /* use any node */ - printk(KERN_WARNING "pcibr_bus_fixup: failed to find " - "near node with CPUs to TIO node %d, err=%d\n", - cnode, e); - } - controller->node = near_cnode; - } - else - controller->node = cnode; return soft; } diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c index 46e16dcf597..35f854fb612 100644 --- a/arch/ia64/sn/pci/tioce_provider.c +++ b/arch/ia64/sn/pci/tioce_provider.c @@ -15,7 +15,6 @@ #include <asm/sn/pcidev.h> #include <asm/sn/pcibus_provider_defs.h> #include <asm/sn/tioce_provider.h> -#include <asm/sn/sn2/sn_hwperf.h> /* * 1/26/2006 @@ -990,8 +989,6 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info) static void * tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *controller) { - int my_nasid; - cnodeid_t my_cnode, mem_cnode; struct tioce_common *tioce_common; struct tioce_kernel *tioce_kern; struct tioce __iomem *tioce_mmr; @@ -1035,21 +1032,6 @@ tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont tioce_common->ce_pcibus.bs_persist_segment, tioce_common->ce_pcibus.bs_persist_busnum); - /* - * identify closest nasid for memory allocations - */ - - my_nasid = NASID_GET(tioce_common->ce_pcibus.bs_base); - my_cnode = nasid_to_cnodeid(my_nasid); - - if (sn_hwperf_get_nearest_node(my_cnode, &mem_cnode, NULL) < 0) { - printk(KERN_WARNING "tioce_bus_fixup: failed to find " - "closest node with MEM to TIO node %d\n", my_cnode); - mem_cnode = (cnodeid_t)-1; /* use any node */ - } - - controller->node = mem_cnode; - return tioce_common; } diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig index 6d920d4bdc3..c1bc22c6d0d 100644 --- a/arch/m68knommu/Kconfig +++ b/arch/m68knommu/Kconfig @@ -565,7 +565,7 @@ config ROMVEC depends on ROM help This is almost always the same as the base of the ROM. Since on all - 68000 type varients the vectors are at the base of the boot device + 68000 type variants the vectors are at the base of the boot device on system startup. config ROMVECSIZE @@ -574,7 +574,7 @@ config ROMVECSIZE depends on ROM help Define the size of the vector region in ROM. For most 68000 - varients this would be 0x400 bytes in size. Set to 0 if you do + variants this would be 0x400 bytes in size. Set to 0 if you do not want a vector region at the start of the ROM. config ROMSTART diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 96143670759..27f83e64296 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -885,7 +885,7 @@ config GENERIC_ISA_DMA_SUPPORT_BROKEN bool # -# Endianess selection. Suffiently obscure so many users don't know what to +# Endianess selection. Sufficiently obscure so many users don't know what to # answer,so we try hard to limit the available choices. Also the use of a # choice statement should be more obvious to the user. # @@ -894,7 +894,7 @@ choice help Some MIPS machines can be configured for either little or big endian byte order. These modes require different kernels and a different - Linux distribution. In general there is one prefered byteorder for a + Linux distribution. In general there is one preferred byteorder for a particular system but some systems are just as commonly used in the one or the other endianess. diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 0673dbedb24..116d7d3683e 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -425,7 +425,7 @@ config PPC_MAPLE default n help This option enables support for the Maple 970FX Evaluation Board. - For more informations, refer to <http://www.970eval.com> + For more information, refer to <http://www.970eval.com> config PPC_PASEMI depends on PPC_MULTIPLATFORM && PPC64 diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index 7edb6b46138..edcd5b875b6 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -21,7 +21,7 @@ config MPC834x_SYS Be aware that PCI buses can only function when SYS board is plugged into the PIB (Platform IO Board) board from Freescale which provide 3 PCI slots. The PIBs PCI initialization is the bootloader's - responsiblilty. + responsibility. config MPC834x_ITX bool "Freescale MPC834x ITX" @@ -30,7 +30,7 @@ config MPC834x_ITX This option enables support for the MPC 834x ITX evaluation board. Be aware that PCI initialization is the bootloader's - responsiblilty. + responsibility. config MPC8360E_PB bool "Freescale MPC8360E PB" diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index 9923adc5248..257dc906846 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -48,7 +48,6 @@ static struct pci_controller *u3_ht; static int has_second_ohare; #endif /* CONFIG_PPC64 */ -extern u8 pci_cache_line_size; extern int pcibios_assign_bus_offset; struct device_node *k2_skiplist[2]; diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 077711e6310..ef018e25fb0 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -724,7 +724,7 @@ config MPC834x_SYS Be aware that PCI buses can only function when SYS board is plugged into the PIB (Platform IO Board) board from Freescale which provide 3 PCI slots. The PIBs PCI initialization is the bootloader's - responsiblilty. + responsibility. config EV64360 bool "Marvell-EV64360BP" diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 6a461d4caef..bffc7e17697 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -217,7 +217,7 @@ config SH_SHMIN bool "SHMIN" select CPU_SUBTYPE_SH7706 help - Select SHMIN if configureing for the SHMIN board + Select SHMIN if configuring for the SHMIN board. config SH_UNKNOWN bool "BareCPU" diff --git a/arch/sh64/lib/dbg.c b/arch/sh64/lib/dbg.c index 1326f45f31e..4310fc87444 100644 --- a/arch/sh64/lib/dbg.c +++ b/arch/sh64/lib/dbg.c @@ -383,7 +383,7 @@ void show_excp_regs(char *from, int trapnr, int signr, struct pt_regs *regs) /* ======================================================================= */ /* -** Depending on <base> scan the MMU, Data or Instrction side +** Depending on <base> scan the MMU, Data or Instruction side ** looking for a valid mapping matching Eaddr & asid. ** Return -1 if not found or the TLB id entry otherwise. ** Note: it works only for 4k pages! diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 2f96610a83e..92a7c8a636d 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -212,8 +212,8 @@ config SPARC_LED tristate "Sun4m LED driver" help This driver toggles the front-panel LED on sun4m systems - in a user-specifyable manner. It's state can be probed - by reading /proc/led and it's blinking mode can be changed + in a user-specifiable manner. Its state can be probed + by reading /proc/led and its blinking mode can be changed via writes to /proc/led source "fs/Kconfig.binfmt" diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c index e02f01b644a..dfc41cd4bb5 100644 --- a/arch/sparc64/kernel/pci.c +++ b/arch/sparc64/kernel/pci.c @@ -646,13 +646,4 @@ int pci_domain_nr(struct pci_bus *pbus) } EXPORT_SYMBOL(pci_domain_nr); -int pcibios_prep_mwi(struct pci_dev *dev) -{ - /* We set correct PCI_CACHE_LINE_SIZE register values for every - * device probed on this platform. So there is nothing to check - * and this always succeeds. - */ - return 0; -} - #endif /* !(CONFIG_PCI) */ diff --git a/arch/um/drivers/chan_user.c b/arch/um/drivers/chan_user.c index 2f880cb167a..0cad3546cb8 100644 --- a/arch/um/drivers/chan_user.c +++ b/arch/um/drivers/chan_user.c @@ -120,7 +120,7 @@ static int winch_thread(void *arg) /* These are synchronization calls between various UML threads on the * host - since they are not different kernel threads, we cannot use * kernel semaphores. We don't use SysV semaphores because they are - * persistant. */ + * persistent. */ count = os_read_file(pipe_fd, &c, sizeof(c)); if(count != sizeof(c)) printk("winch_thread : failed to read synchronization byte, " |