diff options
Diffstat (limited to 'arch')
53 files changed, 1056 insertions, 968 deletions
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index cced73c5811..32b361f31c2 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -7,20 +7,83 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/clk.h> +#include <linux/etherdevice.h> #include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/string.h> +#include <linux/types.h> +#include <asm/io.h> +#include <asm/setup.h> #include <asm/arch/board.h> #include <asm/arch/init.h> -struct eth_platform_data __initdata eth0_data = { - .valid = 1, - .mii_phy_addr = 0x10, - .is_rmii = 0, - .hw_addr = { 0x6a, 0x87, 0x71, 0x14, 0xcd, 0xcb }, +struct eth_addr { + u8 addr[6]; }; +static struct eth_addr __initdata hw_addr[2]; + +static struct eth_platform_data __initdata eth_data[2]; extern struct lcdc_platform_data atstk1000_fb0_data; +/* + * The next two functions should go away as the boot loader is + * supposed to initialize the macb address registers with a valid + * ethernet address. But we need to keep it around for a while until + * we can be reasonably sure the boot loader does this. + * + * The phy_id is ignored as the driver will probe for it. + */ +static int __init parse_tag_ethernet(struct tag *tag) +{ + int i; + + i = tag->u.ethernet.mac_index; + if (i < ARRAY_SIZE(hw_addr)) + memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address, + sizeof(hw_addr[i].addr)); + + return 0; +} +__tagtable(ATAG_ETHERNET, parse_tag_ethernet); + +static void __init set_hw_addr(struct platform_device *pdev) +{ + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + const u8 *addr; + void __iomem *regs; + struct clk *pclk; + + if (!res) + return; + if (pdev->id >= ARRAY_SIZE(hw_addr)) + return; + + addr = hw_addr[pdev->id].addr; + if (!is_valid_ether_addr(addr)) + return; + + /* + * Since this is board-specific code, we'll cheat and use the + * physical address directly as we happen to know that it's + * the same as the virtual address. + */ + regs = (void __iomem __force *)res->start; + pclk = clk_get(&pdev->dev, "pclk"); + if (!pclk) + return; + + clk_enable(pclk); + __raw_writel((addr[3] << 24) | (addr[2] << 16) + | (addr[1] << 8) | addr[0], regs + 0x98); + __raw_writel((addr[5] << 8) | addr[4], regs + 0x9c); + clk_disable(pclk); + clk_put(pclk); +} + void __init setup_board(void) { at32_map_usart(1, 0); /* /dev/ttyS0 */ @@ -38,7 +101,8 @@ static int __init atstk1002_init(void) at32_add_device_usart(1); at32_add_device_usart(2); - at32_add_device_eth(0, ð0_data); + set_hw_addr(at32_add_device_eth(0, ð_data[0])); + at32_add_device_spi(0); at32_add_device_lcdc(0, &atstk1000_fb0_data); diff --git a/arch/avr32/kernel/avr32_ksyms.c b/arch/avr32/kernel/avr32_ksyms.c index 372e3f8b241..7c4c76114bb 100644 --- a/arch/avr32/kernel/avr32_ksyms.c +++ b/arch/avr32/kernel/avr32_ksyms.c @@ -7,12 +7,12 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/delay.h> #include <linux/io.h> #include <linux/module.h> #include <asm/checksum.h> #include <asm/uaccess.h> -#include <asm/delay.h> /* * GCC functions diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c index 317dc50945f..0b4325946a4 100644 --- a/arch/avr32/kernel/process.c +++ b/arch/avr32/kernel/process.c @@ -38,6 +38,13 @@ void cpu_idle(void) void machine_halt(void) { + /* + * Enter Stop mode. The 32 kHz oscillator will keep running so + * the RTC will keep the time properly and the system will + * boot quickly. + */ + asm volatile("sleep 3\n\t" + "sub pc, -2"); } void machine_power_off(void) diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c index ea2d1ffee47..a3421160100 100644 --- a/arch/avr32/kernel/setup.c +++ b/arch/avr32/kernel/setup.c @@ -229,30 +229,6 @@ static int __init parse_tag_rsvd_mem(struct tag *tag) } __tagtable(ATAG_RSVD_MEM, parse_tag_rsvd_mem); -static int __init parse_tag_ethernet(struct tag *tag) -{ -#if 0 - const struct platform_device *pdev; - - /* - * We really need a bus type that supports "classes"...this - * will do for now (until we must handle other kinds of - * ethernet controllers) - */ - pdev = platform_get_device("macb", tag->u.ethernet.mac_index); - if (pdev && pdev->dev.platform_data) { - struct eth_platform_data *data = pdev->dev.platform_data; - - data->valid = 1; - data->mii_phy_addr = tag->u.ethernet.mii_phy_addr; - memcpy(data->hw_addr, tag->u.ethernet.hw_address, - sizeof(data->hw_addr)); - } -#endif - return 0; -} -__tagtable(ATAG_ETHERNET, parse_tag_ethernet); - /* * Scan the tag table for this tag, and call its parse function. The * tag table is built by the linker from all the __tagtable diff --git a/arch/avr32/lib/delay.c b/arch/avr32/lib/delay.c index 462c8307b68..b3bc0b56e2c 100644 --- a/arch/avr32/lib/delay.c +++ b/arch/avr32/lib/delay.c @@ -12,9 +12,9 @@ #include <linux/delay.h> #include <linux/module.h> +#include <linux/param.h> #include <linux/types.h> -#include <asm/delay.h> #include <asm/processor.h> #include <asm/sysreg.h> diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c index 7ff6ad8bab5..48f4ef38c70 100644 --- a/arch/avr32/mach-at32ap/at32ap7000.c +++ b/arch/avr32/mach-at32ap/at32ap7000.c @@ -11,6 +11,7 @@ #include <asm/io.h> +#include <asm/arch/at32ap7000.h> #include <asm/arch/board.h> #include <asm/arch/portmux.h> #include <asm/arch/sm.h> @@ -57,6 +58,9 @@ static struct platform_device _name##_id##_device = { \ .num_resources = ARRAY_SIZE(_name##_id##_resource), \ } +#define select_peripheral(pin, periph, flags) \ + at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags) + #define DEV_CLK(_name, devname, bus, _index) \ static struct clk devname##_##_name = { \ .name = #_name, \ @@ -67,18 +71,6 @@ static struct clk devname##_##_name = { \ .index = _index, \ } -enum { - PIOA, - PIOB, - PIOC, - PIOD, -}; - -enum { - FUNC_A, - FUNC_B, -}; - unsigned long at32ap7000_osc_rates[3] = { [0] = 32768, /* FIXME: these are ATSTK1002-specific */ @@ -569,26 +561,26 @@ DEV_CLK(usart, atmel_usart3, pba, 6); static inline void configure_usart0_pins(void) { - portmux_set_func(PIOA, 8, FUNC_B); /* RXD */ - portmux_set_func(PIOA, 9, FUNC_B); /* TXD */ + select_peripheral(PA(8), PERIPH_B, 0); /* RXD */ + select_peripheral(PA(9), PERIPH_B, 0); /* TXD */ } static inline void configure_usart1_pins(void) { - portmux_set_func(PIOA, 17, FUNC_A); /* RXD */ - portmux_set_func(PIOA, 18, FUNC_A); /* TXD */ + select_peripheral(PA(17), PERIPH_A, 0); /* RXD */ + select_peripheral(PA(18), PERIPH_A, 0); /* TXD */ } static inline void configure_usart2_pins(void) { - portmux_set_func(PIOB, 26, FUNC_B); /* RXD */ - portmux_set_func(PIOB, 27, FUNC_B); /* TXD */ + select_peripheral(PB(26), PERIPH_B, 0); /* RXD */ + select_peripheral(PB(27), PERIPH_B, 0); /* TXD */ } static inline void configure_usart3_pins(void) { - portmux_set_func(PIOB, 18, FUNC_B); /* RXD */ - portmux_set_func(PIOB, 17, FUNC_B); /* TXD */ + select_peripheral(PB(18), PERIPH_B, 0); /* RXD */ + select_peripheral(PB(17), PERIPH_B, 0); /* TXD */ } static struct platform_device *at32_usarts[4]; @@ -654,6 +646,15 @@ DEFINE_DEV_DATA(macb, 0); DEV_CLK(hclk, macb0, hsb, 8); DEV_CLK(pclk, macb0, pbb, 6); +static struct eth_platform_data macb1_data; +static struct resource macb1_resource[] = { + PBMEM(0xfff01c00), + IRQ(26), +}; +DEFINE_DEV_DATA(macb, 1); +DEV_CLK(hclk, macb1, hsb, 9); +DEV_CLK(pclk, macb1, pbb, 7); + struct platform_device *__init at32_add_device_eth(unsigned int id, struct eth_platform_data *data) { @@ -663,27 +664,54 @@ at32_add_device_eth(unsigned int id, struct eth_platform_data *data) case 0: pdev = &macb0_device; - portmux_set_func(PIOC, 3, FUNC_A); /* TXD0 */ - portmux_set_func(PIOC, 4, FUNC_A); /* TXD1 */ - portmux_set_func(PIOC, 7, FUNC_A); /* TXEN */ - portmux_set_func(PIOC, 8, FUNC_A); /* TXCK */ - portmux_set_func(PIOC, 9, FUNC_A); /* RXD0 */ - portmux_set_func(PIOC, 10, FUNC_A); /* RXD1 */ - portmux_set_func(PIOC, 13, FUNC_A); /* RXER */ - portmux_set_func(PIOC, 15, FUNC_A); /* RXDV */ - portmux_set_func(PIOC, 16, FUNC_A); /* MDC */ - portmux_set_func(PIOC, 17, FUNC_A); /* MDIO */ + select_peripheral(PC(3), PERIPH_A, 0); /* TXD0 */ + select_peripheral(PC(4), PERIPH_A, 0); /* TXD1 */ + select_peripheral(PC(7), PERIPH_A, 0); /* TXEN */ + select_peripheral(PC(8), PERIPH_A, 0); /* TXCK */ + select_peripheral(PC(9), PERIPH_A, 0); /* RXD0 */ + select_peripheral(PC(10), PERIPH_A, 0); /* RXD1 */ + select_peripheral(PC(13), PERIPH_A, 0); /* RXER */ + select_peripheral(PC(15), PERIPH_A, 0); /* RXDV */ + select_peripheral(PC(16), PERIPH_A, 0); /* MDC */ + select_peripheral(PC(17), PERIPH_A, 0); /* MDIO */ + + if (!data->is_rmii) { + select_peripheral(PC(0), PERIPH_A, 0); /* COL */ + select_peripheral(PC(1), PERIPH_A, 0); /* CRS */ + select_peripheral(PC(2), PERIPH_A, 0); /* TXER */ + select_peripheral(PC(5), PERIPH_A, 0); /* TXD2 */ + select_peripheral(PC(6), PERIPH_A, 0); /* TXD3 */ + select_peripheral(PC(11), PERIPH_A, 0); /* RXD2 */ + select_peripheral(PC(12), PERIPH_A, 0); /* RXD3 */ + select_peripheral(PC(14), PERIPH_A, 0); /* RXCK */ + select_peripheral(PC(18), PERIPH_A, 0); /* SPD */ + } + break; + + case 1: + pdev = &macb1_device; + + select_peripheral(PD(13), PERIPH_B, 0); /* TXD0 */ + select_peripheral(PD(14), PERIPH_B, 0); /* TXD1 */ + select_peripheral(PD(11), PERIPH_B, 0); /* TXEN */ + select_peripheral(PD(12), PERIPH_B, 0); /* TXCK */ + select_peripheral(PD(10), PERIPH_B, 0); /* RXD0 */ + select_peripheral(PD(6), PERIPH_B, 0); /* RXD1 */ + select_peripheral(PD(5), PERIPH_B, 0); /* RXER */ + select_peripheral(PD(4), PERIPH_B, 0); /* RXDV */ + select_peripheral(PD(3), PERIPH_B, 0); /* MDC */ + select_peripheral(PD(2), PERIPH_B, 0); /* MDIO */ if (!data->is_rmii) { - portmux_set_func(PIOC, 0, FUNC_A); /* COL */ - portmux_set_func(PIOC, 1, FUNC_A); /* CRS */ - portmux_set_func(PIOC, 2, FUNC_A); /* TXER */ - portmux_set_func(PIOC, 5, FUNC_A); /* TXD2 */ - portmux_set_func(PIOC, 6, FUNC_A); /* TXD3 */ - portmux_set_func(PIOC, 11, FUNC_A); /* RXD2 */ - portmux_set_func(PIOC, 12, FUNC_A); /* RXD3 */ - portmux_set_func(PIOC, 14, FUNC_A); /* RXCK */ - portmux_set_func(PIOC, 18, FUNC_A); /* SPD */ + select_peripheral(PC(19), PERIPH_B, 0); /* COL */ + select_peripheral(PC(23), PERIPH_B, 0); /* CRS */ + select_peripheral(PC(26), PERIPH_B, 0); /* TXER */ + select_peripheral(PC(27), PERIPH_B, 0); /* TXD2 */ + select_peripheral(PC(28), PERIPH_B, 0); /* TXD3 */ + select_peripheral(PC(29), PERIPH_B, 0); /* RXD2 */ + select_peripheral(PC(30), PERIPH_B, 0); /* RXD3 */ + select_peripheral(PC(24), PERIPH_B, 0); /* RXCK */ + select_peripheral(PD(15), PERIPH_B, 0); /* SPD */ } break; @@ -714,12 +742,12 @@ struct platform_device *__init at32_add_device_spi(unsigned int id) switch (id) { case 0: pdev = &spi0_device; - portmux_set_func(PIOA, 0, FUNC_A); /* MISO */ - portmux_set_func(PIOA, 1, FUNC_A); /* MOSI */ - portmux_set_func(PIOA, 2, FUNC_A); /* SCK */ - portmux_set_func(PIOA, 3, FUNC_A); /* NPCS0 */ - portmux_set_func(PIOA, 4, FUNC_A); /* NPCS1 */ - portmux_set_func(PIOA, 5, FUNC_A); /* NPCS2 */ + select_peripheral(PA(0), PERIPH_A, 0); /* MISO */ + select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */ + select_peripheral(PA(2), PERIPH_A, 0); /* SCK */ + select_peripheral(PA(3), PERIPH_A, 0); /* NPCS0 */ + select_peripheral(PA(4), PERIPH_A, 0); /* NPCS1 */ + select_peripheral(PA(5), PERIPH_A, 0); /* NPCS2 */ break; default: @@ -762,37 +790,37 @@ at32_add_device_lcdc(unsigned int id, struct lcdc_platform_data *data) switch (id) { case 0: pdev = &lcdc0_device; - portmux_set_func(PIOC, 19, FUNC_A); /* CC */ - portmux_set_func(PIOC, 20, FUNC_A); /* HSYNC */ - portmux_set_func(PIOC, 21, FUNC_A); /* PCLK */ - portmux_set_func(PIOC, 22, FUNC_A); /* VSYNC */ - portmux_set_func(PIOC, 23, FUNC_A); /* DVAL */ - portmux_set_func(PIOC, 24, FUNC_A); /* MODE */ - portmux_set_func(PIOC, 25, FUNC_A); /* PWR */ - portmux_set_func(PIOC, 26, FUNC_A); /* DATA0 */ - portmux_set_func(PIOC, 27, FUNC_A); /* DATA1 */ - portmux_set_func(PIOC, 28, FUNC_A); /* DATA2 */ - portmux_set_func(PIOC, 29, FUNC_A); /* DATA3 */ - portmux_set_func(PIOC, 30, FUNC_A); /* DATA4 */ - portmux_set_func(PIOC, 31, FUNC_A); /* DATA5 */ - portmux_set_func(PIOD, 0, FUNC_A); /* DATA6 */ - portmux_set_func(PIOD, 1, FUNC_A); /* DATA7 */ - portmux_set_func(PIOD, 2, FUNC_A); /* DATA8 */ - portmux_set_func(PIOD, 3, FUNC_A); /* DATA9 */ - portmux_set_func(PIOD, 4, FUNC_A); /* DATA10 */ - portmux_set_func(PIOD, 5, FUNC_A); /* DATA11 */ - portmux_set_func(PIOD, 6, FUNC_A); /* DATA12 */ - portmux_set_func(PIOD, 7, FUNC_A); /* DATA13 */ - portmux_set_func(PIOD, 8, FUNC_A); /* DATA14 */ - portmux_set_func(PIOD, 9, FUNC_A); /* DATA15 */ - portmux_set_func(PIOD, 10, FUNC_A); /* DATA16 */ - portmux_set_func(PIOD, 11, FUNC_A); /* DATA17 */ - portmux_set_func(PIOD, 12, FUNC_A); /* DATA18 */ - portmux_set_func(PIOD, 13, FUNC_A); /* DATA19 */ - portmux_set_func(PIOD, 14, FUNC_A); /* DATA20 */ - portmux_set_func(PIOD, 15, FUNC_A); /* DATA21 */ - portmux_set_func(PIOD, 16, FUNC_A); /* DATA22 */ - portmux_set_func(PIOD, 17, FUNC_A); /* DATA23 */ + select_peripheral(PC(19), PERIPH_A, 0); /* CC */ + select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */ + select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */ + select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */ + select_peripheral(PC(23), PERIPH_A, 0); /* DVAL */ + select_peripheral(PC(24), PERIPH_A, 0); /* MODE */ + select_peripheral(PC(25), PERIPH_A, 0); /* PWR */ + select_peripheral(PC(26), PERIPH_A, 0); /* DATA0 */ + select_peripheral(PC(27), PERIPH_A, 0); /* DATA1 */ + select_peripheral(PC(28), PERIPH_A, 0); /* DATA2 */ + select_peripheral(PC(29), PERIPH_A, 0); /* DATA3 */ + select_peripheral(PC(30), PERIPH_A, 0); /* DATA4 */ + select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */ + select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */ + select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */ + select_peripheral(PD(2), PERIPH_A, 0); /* DATA8 */ + select_peripheral(PD(3), PERIPH_A, 0); /* DATA9 */ + select_peripheral(PD(4), PERIPH_A, 0); /* DATA10 */ + select_peripheral(PD(5), PERIPH_A, 0); /* DATA11 */ + select_peripheral(PD(6), PERIPH_A, 0); /* DATA12 */ + select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */ + select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */ + select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */ + select_peripheral(PD(10), PERIPH_A, 0); /* DATA16 */ + select_peripheral(PD(11), PERIPH_A, 0); /* DATA17 */ + select_peripheral(PD(12), PERIPH_A, 0); /* DATA18 */ + select_peripheral(PD(13), PERIPH_A, 0); /* DATA19 */ + select_peripheral(PD(14), PERIPH_A, 0); /* DATA20 */ + select_peripheral(PD(15), PERIPH_A, 0); /* DATA21 */ + select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */ + select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */ clk_set_parent(&lcdc0_pixclk, &pll0); clk_set_rate(&lcdc0_pixclk, clk_get_rate(&pll0)); @@ -838,6 +866,8 @@ struct clk *at32_clock_list[] = { &atmel_usart3_usart, &macb0_hclk, &macb0_pclk, + &macb1_hclk, + &macb1_pclk, &spi0_mck, &lcdc0_hclk, &lcdc0_pixclk, diff --git a/arch/avr32/mach-at32ap/extint.c b/arch/avr32/mach-at32ap/extint.c index 4dff1f98890..b59272e81b9 100644 --- a/arch/avr32/mach-at32ap/extint.c +++ b/arch/avr32/mach-at32ap/extint.c @@ -49,12 +49,25 @@ static void eim_unmask_irq(unsigned int irq) static int eim_set_irq_type(unsigned int irq, unsigned int flow_type) { struct at32_sm *sm = get_irq_chip_data(irq); + struct irq_desc *desc; unsigned int i = irq - sm->eim_first_irq; u32 mode, edge, level; unsigned long flags; int ret = 0; - flow_type &= IRQ_TYPE_SENSE_MASK; + if (flow_type == IRQ_TYPE_NONE) + flow_type = IRQ_TYPE_LEVEL_LOW; + + desc = &irq_desc[irq]; + desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL); + desc->status |= flow_type & IRQ_TYPE_SENSE_MASK; + + if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) { + desc->status |= IRQ_LEVEL; + set_irq_handler(irq, handle_level_irq); + } else { + set_irq_handler(irq, handle_edge_irq); + } spin_lock_irqsave(&sm->lock, flags); @@ -148,10 +161,15 @@ static int __init eim_init(void) pattern = sm_readl(sm, EIM_MODE); nr_irqs = fls(pattern); + /* Trigger on falling edge unless overridden by driver */ + sm_writel(sm, EIM_MODE, 0UL); + sm_writel(sm, EIM_EDGE, 0UL); + sm->eim_chip = &eim_chip; for (i = 0; i < nr_irqs; i++) { - set_irq_chip(sm->eim_first_irq + i, &eim_chip); + set_irq_chip_and_handler(sm->eim_first_irq + i, &eim_chip, + handle_edge_irq); set_irq_chip_data(sm->eim_first_irq + i, sm); } diff --git a/arch/avr32/mach-at32ap/intc.c b/arch/avr32/mach-at32ap/intc.c index eb87a18ad7b..dd5c009cf22 100644 --- a/arch/avr32/mach-at32ap/intc.c +++ b/arch/avr32/mach-at32ap/intc.c @@ -136,3 +136,7 @@ fail: panic("Interrupt controller initialization failed!\n"); } +unsigned long intc_get_pending(int group) +{ + return intc_readl(&intc0, INTREQ0 + 4 * group); +} diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c index d3aabfca859..f1280ed8ed6 100644 --- a/arch/avr32/mach-at32ap/pio.c +++ b/arch/avr32/mach-at32ap/pio.c @@ -25,27 +25,98 @@ struct pio_device { void __iomem *regs; const struct platform_device *pdev; struct clk *clk; - u32 alloc_mask; + u32 pinmux_mask; char name[32]; }; static struct pio_device pio_dev[MAX_NR_PIO_DEVICES]; -void portmux_set_func(unsigned int portmux_id, unsigned int pin_id, - unsigned int function_id) +static struct pio_device *gpio_to_pio(unsigned int gpio) { struct pio_device *pio; - u32 mask = 1 << pin_id; + unsigned int index; - BUG_ON(portmux_id >= MAX_NR_PIO_DEVICES); + index = gpio >> 5; + if (index >= MAX_NR_PIO_DEVICES) + return NULL; + pio = &pio_dev[index]; + if (!pio->regs) + return NULL; - pio = &pio_dev[portmux_id]; + return pio; +} + +/* Pin multiplexing API */ + +void __init at32_select_periph(unsigned int pin, unsigned int periph, + unsigned long flags) +{ + struct pio_device *pio; + unsigned int pin_index = pin & 0x1f; + u32 mask = 1 << pin_index; + + pio = gpio_to_pio(pin); + if (unlikely(!pio)) { + printk("pio: invalid pin %u\n", pin); + goto fail; + } - if (function_id) + if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask))) { + printk("%s: pin %u is busy\n", pio->name, pin_index); + goto fail; + } + + pio_writel(pio, PUER, mask); + if (periph) pio_writel(pio, BSR, mask); else pio_writel(pio, ASR, mask); + pio_writel(pio, PDR, mask); + if (!(flags & AT32_GPIOF_PULLUP)) + pio_writel(pio, PUDR, mask); + + return; + +fail: + dump_stack(); +} + +void __init at32_select_gpio(unsigned int pin, unsigned long flags) +{ + struct pio_device *pio; + unsigned int pin_index = pin & 0x1f; + u32 mask = 1 << pin_index; + + pio = gpio_to_pio(pin); + if (unlikely(!pio)) { + printk("pio: invalid pin %u\n", pin); + goto fail; + } + + if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask))) { + printk("%s: pin %u is busy\n", pio->name, pin_index); + goto fail; + } + + pio_writel(pio, PUER, mask); + if (flags & AT32_GPIOF_HIGH) + pio_writel(pio, SODR, mask); + else + pio_writel(pio, CODR, mask); + if (flags & AT32_GPIOF_OUTPUT) + pio_writel(pio, OER, mask); + else + pio_writel(pio, ODR, mask); + + pio_writel(pio, PER, mask); + if (!(flags & AT32_GPIOF_PULLUP)) + pio_writel(pio, PUDR, mask); + + return; + +fail: + dump_stack(); } static int __init pio_probe(struct platform_device *pdev) diff --git a/arch/avr32/mach-at32ap/sm.c b/arch/avr32/mach-at32ap/sm.c deleted file mode 100644 index 03306eb0345..00000000000 --- a/arch/avr32/mach-at32ap/sm.c +++ /dev/null @@ -1,289 +0,0 @@ -/* - * System Manager driver for AT32AP CPUs - * - * Copyright (C) 2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/random.h> -#include <linux/spinlock.h> - -#include <asm/intc.h> -#include <asm/io.h> -#include <asm/irq.h> - -#include <asm/arch/sm.h> - -#include "sm.h" - -#define SM_EIM_IRQ_RESOURCE 1 -#define SM_PM_IRQ_RESOURCE 2 -#define SM_RTC_IRQ_RESOURCE 3 - -#define to_eim(irqc) container_of(irqc, struct at32_sm, irqc) - -struct at32_sm system_manager; - -int __init at32_sm_init(void) -{ - struct resource *regs; - struct at32_sm *sm = &system_manager; - int ret = -ENXIO; - - regs = platform_get_resource(&at32_sm_device, IORESOURCE_MEM, 0); - if (!regs) - goto fail; - - spin_lock_init(&sm->lock); - sm->pdev = &at32_sm_device; - - ret = -ENOMEM; - sm->regs = ioremap(regs->start, regs->end - regs->start + 1); - if (!sm->regs) - goto fail; - - return 0; - -fail: - printk(KERN_ERR "Failed to initialize System Manager: %d\n", ret); - return ret; -} - -/* - * External Interrupt Module (EIM). - * - * EIM gets level- or edge-triggered interrupts of either polarity - * from the outside and converts it to active-high level-triggered - * interrupts that the internal interrupt controller can handle. EIM - * also provides masking/unmasking of interrupts, as well as - * acknowledging of edge-triggered interrupts. - */ - -static irqreturn_t spurious_eim_interrupt(int irq, void *dev_id, - struct pt_regs *regs) -{ - printk(KERN_WARNING "Spurious EIM interrupt %d\n", irq); - disable_irq(irq); - return IRQ_NONE; -} - -static struct irqaction eim_spurious_action = { - .handler = spurious_eim_interrupt, -}; - -static irqreturn_t eim_handle_irq(int irq, void *dev_id, struct pt_regs *regs) -{ - struct irq_controller * irqc = dev_id; - struct at32_sm *sm = to_eim(irqc); - unsigned long pending; - - /* - * No need to disable interrupts globally. The interrupt - * level relevant to this group must be masked all the time, - * so we know that this particular EIM instance will not be - * re-entered. - */ - spin_lock(&sm->lock); - - pending = intc_get_pending(sm->irqc.irq_group); - if (unlikely(!pending)) { - printk(KERN_ERR "EIM (group %u): No interrupts pending!\n", - sm->irqc.irq_group); - goto unlock; - } - - do { - struct irqaction *action; - unsigned int i; - - i = fls(pending) - 1; - pending &= ~(1 << i); - action = sm->action[i]; - - /* Acknowledge the interrupt */ - sm_writel(sm, EIM_ICR, 1 << i); - - spin_unlock(&sm->lock); - - if (action->flags & SA_INTERRUPT) - local_irq_disable(); - action->handler(sm->irqc.first_irq + i, action->dev_id, regs); - local_irq_enable(); - spin_lock(&sm->lock); - if (action->flags & SA_SAMPLE_RANDOM) - add_interrupt_randomness(sm->irqc.first_irq + i); - } while (pending); - -unlock: - spin_unlock(&sm->lock); - return IRQ_HANDLED; -} - -static void eim_mask(struct irq_controller *irqc, unsigned int irq) -{ - struct at32_sm *sm = to_eim(irqc); - unsigned int i; - - i = irq - sm->irqc.first_irq; - sm_writel(sm, EIM_IDR, 1 << i); -} - -static void eim_unmask(struct irq_controller *irqc, unsigned int irq) -{ - struct at32_sm *sm = to_eim(irqc); - unsigned int i; - - i = irq - sm->irqc.first_irq; - sm_writel(sm, EIM_IER, 1 << i); -} - -static int eim_setup(struct irq_controller *irqc, unsigned int irq, - struct irqaction *action) -{ - struct at32_sm *sm = to_eim(irqc); - sm->action[irq - sm->irqc.first_irq] = action; - /* Acknowledge earlier interrupts */ - sm_writel(sm, EIM_ICR, (1<<(irq - sm->irqc.first_irq))); - eim_unmask(irqc, irq); - return 0; -} - -static void eim_free(struct irq_controller *irqc, unsigned int irq, - void *dev) -{ - struct at32_sm *sm = to_eim(irqc); - eim_mask(irqc, irq); - sm->action[irq - sm->irqc.first_irq] = &eim_spurious_action; -} - -static int eim_set_type(struct irq_controller *irqc, unsigned int irq, - unsigned int type) -{ - struct at32_sm *sm = to_eim(irqc); - unsigned long flags; - u32 value, pattern; - - spin_lock_irqsave(&sm->lock, flags); - - pattern = 1 << (irq - sm->irqc.first_irq); - - value = sm_readl(sm, EIM_MODE); - if (type & IRQ_TYPE_LEVEL) - value |= pattern; - else - value &= ~pattern; - sm_writel(sm, EIM_MODE, value); - value = sm_readl(sm, EIM_EDGE); - if (type & IRQ_EDGE_RISING) - value |= pattern; - else - value &= ~pattern; - sm_writel(sm, EIM_EDGE, value); - value = sm_readl(sm, EIM_LEVEL); - if (type & IRQ_LEVEL_HIGH) - value |= pattern; - else - value &= ~pattern; - sm_writel(sm, EIM_LEVEL, value); - - spin_unlock_irqrestore(&sm->lock, flags); - - return 0; -} - -static unsigned int eim_get_type(struct irq_controller *irqc, - unsigned int irq) -{ - struct at32_sm *sm = to_eim(irqc); - unsigned long flags; - unsigned int type = 0; - u32 mode, edge, level, pattern; - - pattern = 1 << (irq - sm->irqc.first_irq); - - spin_lock_irqsave(&sm->lock, flags); - mode = sm_readl(sm, EIM_MODE); - edge = sm_readl(sm, EIM_EDGE); - level = sm_readl(sm, EIM_LEVEL); - spin_unlock_irqrestore(&sm->lock, flags); - - if (mode & pattern) - type |= IRQ_TYPE_LEVEL; - if (edge & pattern) - type |= IRQ_EDGE_RISING; - if (level & pattern) - type |= IRQ_LEVEL_HIGH; - - return type; -} - -static struct irq_controller_class eim_irq_class = { - .typename = "EIM", - .handle = eim_handle_irq, - .setup = eim_setup, - .free = eim_free, - .mask = eim_mask, - .unmask = eim_unmask, - .set_type = eim_set_type, - .get_type = eim_get_type, -}; - -static int __init eim_init(void) -{ - struct at32_sm *sm = &system_manager; - unsigned int i; - u32 pattern; - int ret; - - /* - * The EIM is really the same module as SM, so register - * mapping, etc. has been taken care of already. - */ - - /* - * Find out how many interrupt lines that are actually - * implemented in hardware. - */ - sm_writel(sm, EIM_IDR, ~0UL); - sm_writel(sm, EIM_MODE, ~0UL); - pattern = sm_readl(sm, EIM_MODE); - sm->irqc.nr_irqs = fls(pattern); - - ret = -ENOMEM; - sm->action = kmalloc(sizeof(*sm->action) * sm->irqc.nr_irqs, - GFP_KERNEL); - if (!sm->action) - goto out; - - for (i = 0; i < sm->irqc.nr_irqs; i++) - sm->action[i] = &eim_spurious_action; - - spin_lock_init(&sm->lock); - sm->irqc.irq_group = sm->pdev->resource[SM_EIM_IRQ_RESOURCE].start; - sm->irqc.class = &eim_irq_class; - - ret = intc_register_controller(&sm->irqc); - if (ret < 0) - goto out_free_actions; - - printk("EIM: External Interrupt Module at 0x%p, IRQ group %u\n", - sm->regs, sm->irqc.irq_group); - printk("EIM: Handling %u external IRQs, starting with IRQ%u\n", - sm->irqc.nr_irqs, sm->irqc.first_irq); - - return 0; - -out_free_actions: - kfree(sm->action); -out: - return ret; -} -arch_initcall(eim_init); diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index 1f9300f37f5..96e941084c0 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -644,7 +644,85 @@ CONFIG_CONNECTOR=m # # Memory Technology Devices (MTD) # -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set # # Parallel port support diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index 2f4508f55fc..cecff24cc97 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -109,6 +109,10 @@ SECTIONS .con_initcall.init : { *(.con_initcall.init) } __con_initcall_end = .; SECURITY_INIT + /* .exit.text is discarded at runtime, not link time, to deal with + references from .rodata */ + .exit.text : { *(.exit.text) } + .exit.data : { *(.exit.data) } . = ALIGN(_PAGE_SIZE); __initramfs_start = .; .init.ramfs : { *(.init.ramfs) } @@ -136,8 +140,6 @@ SECTIONS /* Sections to be discarded */ /DISCARD/ : { - *(.exit.text) - *(.exit.data) *(.exitcall.exit) /* ABI crap starts here */ diff --git a/arch/mips/mips-boards/malta/Makefile b/arch/mips/mips-boards/malta/Makefile index 77ee5c6d33c..b662c75fb28 100644 --- a/arch/mips/mips-boards/malta/Makefile +++ b/arch/mips/mips-boards/malta/Makefile @@ -19,5 +19,5 @@ # under Linux. # -obj-y := malta_int.o malta_setup.o +obj-y := malta_int.o malta_mtd.o malta_setup.o obj-$(CONFIG_SMP) += malta_smp.o diff --git a/arch/mips/mips-boards/malta/malta_setup.c b/arch/mips/mips-boards/malta/malta_setup.c index 282f3e52eea..56ea76679cd 100644 --- a/arch/mips/mips-boards/malta/malta_setup.c +++ b/arch/mips/mips-boards/malta/malta_setup.c @@ -21,13 +21,6 @@ #include <linux/pci.h> #include <linux/screen_info.h> -#ifdef CONFIG_MTD -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#endif - #include <asm/cpu.h> #include <asm/bootinfo.h> #include <asm/irq.h> @@ -58,30 +51,6 @@ struct resource standard_io_resources[] = { { .name = "dma2", .start = 0xc0, .end = 0xdf, .flags = IORESOURCE_BUSY }, }; -#ifdef CONFIG_MTD -static struct mtd_partition malta_mtd_partitions[] = { - { - .name = "YAMON", - .offset = 0x0, - .size = 0x100000, - .mask_flags = MTD_WRITEABLE - }, - { - .name = "User FS", - .offset = 0x100000, - .size = 0x2e0000 - }, - { - .name = "Board Config", - .offset = 0x3e0000, - .size = 0x020000, - .mask_flags = MTD_WRITEABLE - } -}; - -#define number_partitions (sizeof(malta_mtd_partitions)/sizeof(struct mtd_partition)) -#endif - const char *get_system_type(void) { return "MIPS Malta"; @@ -211,14 +180,6 @@ void __init plat_mem_setup(void) #endif #endif -#ifdef CONFIG_MTD - /* - * Support for MTD on Malta. Use the generic physmap driver - */ - physmap_configure(0x1e000000, 0x400000, 4, NULL); - physmap_set_partitions(malta_mtd_partitions, number_partitions); -#endif - mips_reboot_setup(); board_time_init = mips_time_init; diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 9e29ba9205f..ea2d15370bb 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -316,7 +316,7 @@ static int __init page_is_ram(unsigned long pagenr) void __init paging_init(void) { unsigned long zones_size[MAX_NR_ZONES] = { 0, }; - unsigned long max_dma, high, low; + unsigned long max_dma, low; #ifndef CONFIG_FLATMEM unsigned long zholes_size[MAX_NR_ZONES] = { 0, }; unsigned long i, j, pfn; @@ -331,7 +331,6 @@ void __init paging_init(void) max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT; low = max_low_pfn; - high = highend_pfn; #ifdef CONFIG_ISA if (low < max_dma) @@ -344,13 +343,13 @@ void __init paging_init(void) zones_size[ZONE_DMA] = low; #endif #ifdef CONFIG_HIGHMEM - if (cpu_has_dc_aliases) { - printk(KERN_WARNING "This processor doesn't support highmem."); - if (high - low) - printk(" %ldk highmem ignored", high - low); - printk("\n"); - } else - zones_size[ZONE_HIGHMEM] = high - low; + zones_size[ZONE_HIGHMEM] = highend_pfn - highstart_pfn; + + if (cpu_has_dc_aliases && zones_size[ZONE_HIGHMEM]) { + printk(KERN_WARNING "This processor doesn't support highmem." + " %ldk highmem ignored\n", zones_size[ZONE_HIGHMEM]); + zones_size[ZONE_HIGHMEM] = 0; + } #endif #ifdef CONFIG_FLATMEM diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 56c3c4065eb..8699dadcd09 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -107,6 +107,11 @@ config AUDIT_ARCH bool default y +config GENERIC_BUG + bool + default y + depends on BUG + config DEFAULT_UIMAGE bool help @@ -478,6 +483,7 @@ config PPC_MAPLE select PPC_UDBG_16550 select PPC_970_NAP select PPC_NATIVE + select PPC_RTAS default n help This option enables support for the Maple 970FX Evaluation Board. @@ -714,7 +720,7 @@ config FORCE_MAX_ZONEORDER config MATH_EMULATION bool "Math emulation" - depends on 4xx || 8xx || E200 || E500 + depends on 4xx || 8xx || E200 || PPC_83xx || E500 ---help--- Some PowerPC chips designed for embedded applications do not have a floating-point unit and therefore do not implement the diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig index f2d888e014a..70ed61337f5 100644 --- a/arch/powerpc/configs/ps3_defconfig +++ b/arch/powerpc/configs/ps3_defconfig @@ -157,6 +157,7 @@ CONFIG_SPU_BASE=y CONFIG_PS3_HTAB_SIZE=20 CONFIG_PS3_DYNAMIC_DMA=y CONFIG_PS3_USE_LPAR_ADDR=y +CONFIG_PS3_VUART=y # # Kernel options diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 4fe53d08ab8..d2ded19e406 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -77,6 +77,7 @@ endif ifeq ($(CONFIG_PPC_ISERIES),y) extra-y += lparmap.s +$(obj)/head_64.o: $(obj)/lparmap.s AFLAGS_head_64.o += -I$(obj) endif diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 9d1614c3ce6..b742013bb9d 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -833,7 +833,7 @@ static struct cpu_spec cpu_specs[] = { .pvr_mask = 0x7fff0000, .pvr_value = 0x00840000, .cpu_name = "e300c2", - .cpu_features = CPU_FTRS_E300, + .cpu_features = CPU_FTRS_E300C2, .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU, .icache_bsize = 32, .dcache_bsize = 32, @@ -1136,8 +1136,7 @@ static struct cpu_spec cpu_specs[] = { .pvr_mask = 0xff000fff, .pvr_value = 0x53000890, .cpu_name = "440SPe Rev. A", - .cpu_features = CPU_FTR_SPLIT_ID_CACHE | - CPU_FTR_USE_TB, + .cpu_features = CPU_FTRS_44X, .cpu_user_features = COMMON_USER_BOOKE, .icache_bsize = 32, .dcache_bsize = 32, diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index d88e182e40b..9417cf5b4b7 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -437,6 +437,13 @@ Alignment: /* Floating-point unavailable */ . = 0x800 FPUnavailable: +BEGIN_FTR_SECTION +/* + * Certain Freescale cores don't have a FPU and treat fp instructions + * as a FP Unavailable exception. Redirect to illegal/emulation handling. + */ + b ProgramCheck +END_FTR_SECTION_IFSET(CPU_FTR_FPU_UNAVAILABLE) EXCEPTION_PROLOG bne load_up_fpu /* if from user, just load it up */ addi r3,r1,STACK_FRAME_OVERHEAD diff --git a/arch/powerpc/kernel/module_32.c b/arch/powerpc/kernel/module_32.c index e2c3c6a85f3..8339fd609de 100644 --- a/arch/powerpc/kernel/module_32.c +++ b/arch/powerpc/kernel/module_32.c @@ -23,6 +23,7 @@ #include <linux/string.h> #include <linux/kernel.h> #include <linux/cache.h> +#include <linux/bug.h> #include "setup.h" @@ -290,23 +291,11 @@ int module_finalize(const Elf_Ehdr *hdr, struct module *me) { const Elf_Shdr *sect; + int err; - me->arch.bug_table = NULL; - me->arch.num_bugs = 0; - - /* Find the __bug_table section, if present */ - sect = find_section(hdr, sechdrs, "__bug_table"); - if (sect != NULL) { - me->arch.bug_table = (void *) sect->sh_addr; - me->arch.num_bugs = sect->sh_size / sizeof(struct bug_entry); - } - - /* - * Strictly speaking this should have a spinlock to protect against - * traversals, but since we only traverse on BUG()s, a spinlock - * could potentially lead to deadlock and thus be counter-productive. - */ - list_add(&me->arch.bug_list, &module_bug_list); + err = module_bug_finalize(hdr, sechdrs, me); + if (err) /* never true, currently */ + return err; /* Apply feature fixups */ sect = find_section(hdr, sechdrs, "__ftr_fixup"); @@ -320,7 +309,7 @@ int module_finalize(const Elf_Ehdr *hdr, void module_arch_cleanup(struct module *mod) { - list_del(&mod->arch.bug_list); + module_bug_cleanup(mod); } struct bug_entry *module_find_bug(unsigned long bugaddr) diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c index 8dd1f0aae5d..75c7c4f1928 100644 --- a/arch/powerpc/kernel/module_64.c +++ b/arch/powerpc/kernel/module_64.c @@ -20,6 +20,7 @@ #include <linux/moduleloader.h> #include <linux/err.h> #include <linux/vmalloc.h> +#include <linux/bug.h> #include <asm/module.h> #include <asm/uaccess.h> #include <asm/firmware.h> @@ -439,23 +440,11 @@ int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *me) { const Elf_Shdr *sect; + int err; - me->arch.bug_table = NULL; - me->arch.num_bugs = 0; - - /* Find the __bug_table section, if present */ - sect = find_section(hdr, sechdrs, "__bug_table"); - if (sect != NULL) { - me->arch.bug_table = (void *) sect->sh_addr; - me->arch.num_bugs = sect->sh_size / sizeof(struct bug_entry); - } - - /* - * Strictly speaking this should have a spinlock to protect against - * traversals, but since we only traverse on BUG()s, a spinlock - * could potentially lead to deadlock and thus be counter-productive. - */ - list_add(&me->arch.bug_list, &module_bug_list); + err = module_bug_finalize(hdr, sechdrs, me); + if (err) + return err; /* Apply feature fixups */ sect = find_section(hdr, sechdrs, "__ftr_fixup"); @@ -475,7 +464,7 @@ int module_finalize(const Elf_Ehdr *hdr, void module_arch_cleanup(struct module *mod) { - list_del(&mod->arch.bug_list); + module_bug_cleanup(mod); } struct bug_entry *module_find_bug(unsigned long bugaddr) diff --git a/arch/powerpc/kernel/of_device.c b/arch/powerpc/kernel/of_device.c index 8a06724e029..e921514e655 100644 --- a/arch/powerpc/kernel/of_device.c +++ b/arch/powerpc/kernel/of_device.c @@ -109,9 +109,7 @@ int of_device_register(struct of_device *ofdev) if (rc) return rc; - device_create_file(&ofdev->dev, &dev_attr_devspec); - - return 0; + return device_create_file(&ofdev->dev, &dev_attr_devspec); } void of_device_unregister(struct of_device *ofdev) diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c index b3189d0161b..3002ea3a61a 100644 --- a/arch/powerpc/kernel/of_platform.c +++ b/arch/powerpc/kernel/of_platform.c @@ -169,7 +169,7 @@ static void of_platform_make_bus_id(struct of_device *dev) char *name = dev->dev.bus_id; const u32 *reg; u64 addr; - long magic; + int magic; /* * If it's a DCR based device, use 'd' for native DCRs diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index 2f54cd81dea..8336deafc62 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c @@ -736,25 +736,51 @@ scan_OF_pci_childs(struct device_node* node, pci_OF_scan_iterator filter, void* return NULL; } -static int -scan_OF_pci_childs_iterator(struct device_node* node, void* data) +static struct device_node *scan_OF_for_pci_dev(struct device_node *parent, + unsigned int devfn) { - const unsigned int *reg; - u8* fdata = (u8*)data; - - reg = get_property(node, "reg", NULL); - if (reg && ((reg[0] >> 8) & 0xff) == fdata[1] - && ((reg[0] >> 16) & 0xff) == fdata[0]) - return 1; - return 0; + struct device_node *np = NULL; + const u32 *reg; + unsigned int psize; + + while ((np = of_get_next_child(parent, np)) != NULL) { + reg = get_property(np, "reg", &psize); + if (reg == NULL || psize < 4) + continue; + if (((reg[0] >> 8) & 0xff) == devfn) + return np; + } + return NULL; } -static struct device_node* -scan_OF_childs_for_device(struct device_node* node, u8 bus, u8 dev_fn) + +static struct device_node *scan_OF_for_pci_bus(struct pci_bus *bus) { - u8 filter_data[2] = {bus, dev_fn}; + struct device_node *parent, *np; + + /* Are we a root bus ? */ + if (bus->self == NULL || bus->parent == NULL) { + struct pci_controller *hose = pci_bus_to_hose(bus->number); + if (hose == NULL) + return NULL; + return of_node_get(hose->arch_data); + } + + /* not a root bus, we need to get our parent */ + parent = scan_OF_for_pci_bus(bus->parent); + if (parent == NULL) + return NULL; + + /* now iterate for children for a match */ + np = scan_OF_for_pci_dev(parent, bus->self->devfn); + of_node_put(parent); - return scan_OF_pci_childs(node, scan_OF_pci_childs_iterator, filter_data); + /* sanity check */ + if (strcmp(np->type, "pci") != 0) + printk(KERN_WARNING "pci: wrong type \"%s\" for bridge %s\n", + np->type, np->full_name); + + return np; } /* @@ -763,43 +789,25 @@ scan_OF_childs_for_device(struct device_node* node, u8 bus, u8 dev_fn) struct device_node * pci_busdev_to_OF_node(struct pci_bus *bus, int devfn) { - struct pci_controller *hose; - struct device_node *node; - int busnr; + struct device_node *parent, *np; if (!have_of) return NULL; - - /* Lookup the hose */ - busnr = bus->number; - hose = pci_bus_to_hose(busnr); - if (!hose) - return NULL; - /* Check it has an OF node associated */ - node = (struct device_node *) hose->arch_data; - if (!node) + DBG("pci_busdev_to_OF_node(%d,0x%x)\n", bus->number, devfn); + parent = scan_OF_for_pci_bus(bus); + if (parent == NULL) return NULL; - - /* Fixup bus number according to what OF think it is. */ -#ifdef CONFIG_PPC_PMAC - /* The G5 need a special case here. Basically, we don't remap all - * busses on it so we don't create the pci-OF-map. However, we do - * remap the AGP bus and so have to deal with it. A future better - * fix has to be done by making the remapping per-host and always - * filling the pci_to_OF map. --BenH + DBG(" parent is %s\n", parent ? parent->full_name : "<NULL>"); + np = scan_OF_for_pci_dev(parent, devfn); + of_node_put(parent); + DBG(" result is %s\n", np ? np->full_name : "<NULL>"); + + /* XXX most callers don't release the returned node + * mostly because ppc64 doesn't increase the refcount, + * we need to fix that. */ - if (machine_is(powermac) && busnr >= 0xf0) - busnr -= 0xf0; - else -#endif - if (pci_to_OF_bus_map) - busnr = pci_to_OF_bus_map[busnr]; - if (busnr == 0xff) - return NULL; - - /* Now, lookup childs of the hose */ - return scan_OF_childs_for_device(node->child, busnr, devfn); + return np; } EXPORT_SYMBOL(pci_busdev_to_OF_node); @@ -1544,7 +1552,7 @@ pci_resource_to_bus(struct pci_dev *pdev, struct resource *res) static struct resource *__pci_mmap_make_offset(struct pci_dev *dev, - unsigned long *offset, + resource_size_t *offset, enum pci_mmap_state mmap_state) { struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); @@ -1556,7 +1564,9 @@ static struct resource *__pci_mmap_make_offset(struct pci_dev *dev, /* If memory, add on the PCI bridge address offset */ if (mmap_state == pci_mmap_mem) { +#if 0 /* See comment in pci_resource_to_user() for why this is disabled */ *offset += hose->pci_mem_offset; +#endif res_bit = IORESOURCE_MEM; } else { io_offset = hose->io_base_virt - (void __iomem *)_IO_BASE; @@ -1624,9 +1634,6 @@ static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp, else prot |= _PAGE_GUARDED; - printk("PCI map for %s:%llx, prot: %lx\n", pci_name(dev), - (unsigned long long)rp->start, prot); - return __pgprot(prot); } @@ -1695,7 +1702,7 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine) { - unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; + resource_size_t offset = vma->vm_pgoff << PAGE_SHIFT; struct resource *rp; int ret; @@ -1808,22 +1815,42 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar, resource_size_t *start, resource_size_t *end) { struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); - unsigned long offset = 0; + resource_size_t offset = 0; if (hose == NULL) return; if (rsrc->flags & IORESOURCE_IO) - offset = (void __iomem *)_IO_BASE - hose->io_base_virt - + hose->io_base_phys; + offset = (unsigned long)hose->io_base_virt - _IO_BASE; + + /* We pass a fully fixed up address to userland for MMIO instead of + * a BAR value because X is lame and expects to be able to use that + * to pass to /dev/mem ! + * + * That means that we'll have potentially 64 bits values where some + * userland apps only expect 32 (like X itself since it thinks only + * Sparc has 64 bits MMIO) but if we don't do that, we break it on + * 32 bits CHRPs :-( + * + * Hopefully, the sysfs insterface is immune to that gunk. Once X + * has been fixed (and the fix spread enough), we can re-enable the + * 2 lines below and pass down a BAR value to userland. In that case + * we'll also have to re-enable the matching code in + * __pci_mmap_make_offset(). + * + * BenH. + */ +#if 0 + else if (rsrc->flags & IORESOURCE_MEM) + offset = hose->pci_mem_offset; +#endif - *start = rsrc->start + offset; - *end = rsrc->end + offset; + *start = rsrc->start - offset; + *end = rsrc->end - offset; } -void __init -pci_init_resource(struct resource *res, unsigned long start, unsigned long end, - int flags, char *name) +void __init pci_init_resource(struct resource *res, resource_size_t start, + resource_size_t end, int flags, char *name) { res->start = start; res->end = end; diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 6fa9a0a5c8d..a6b7692c726 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -682,7 +682,7 @@ int pci_proc_domain(struct pci_bus *bus) * Returns negative error code on failure, zero on success. */ static struct resource *__pci_mmap_make_offset(struct pci_dev *dev, - unsigned long *offset, + resource_size_t *offset, enum pci_mmap_state mmap_state) { struct pci_controller *hose = pci_bus_to_host(dev->bus); @@ -694,7 +694,9 @@ static struct resource *__pci_mmap_make_offset(struct pci_dev *dev, /* If memory, add on the PCI bridge address offset */ if (mmap_state == pci_mmap_mem) { +#if 0 /* See comment in pci_resource_to_user() for why this is disabled */ *offset += hose->pci_mem_offset; +#endif res_bit = IORESOURCE_MEM; } else { io_offset = (unsigned long)hose->io_base_virt - pci_io_base; @@ -762,9 +764,6 @@ static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp, else prot |= _PAGE_GUARDED; - printk(KERN_DEBUG "PCI map for %s:%lx, prot: %lx\n", pci_name(dev), rp->start, - prot); - return __pgprot(prot); } @@ -832,7 +831,7 @@ pgprot_t pci_phys_mem_access_prot(struct file *file, int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine) { - unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; + resource_size_t offset = vma->vm_pgoff << PAGE_SHIFT; struct resource *rp; int ret; @@ -1333,20 +1332,41 @@ EXPORT_SYMBOL(pci_read_irq_line); void pci_resource_to_user(const struct pci_dev *dev, int bar, const struct resource *rsrc, - u64 *start, u64 *end) + resource_size_t *start, resource_size_t *end) { struct pci_controller *hose = pci_bus_to_host(dev->bus); - unsigned long offset = 0; + resource_size_t offset = 0; if (hose == NULL) return; if (rsrc->flags & IORESOURCE_IO) - offset = pci_io_base - (unsigned long)hose->io_base_virt + - hose->io_base_phys; + offset = (unsigned long)hose->io_base_virt - pci_io_base; + + /* We pass a fully fixed up address to userland for MMIO instead of + * a BAR value because X is lame and expects to be able to use that + * to pass to /dev/mem ! + * + * That means that we'll have potentially 64 bits values where some + * userland apps only expect 32 (like X itself since it thinks only + * Sparc has 64 bits MMIO) but if we don't do that, we break it on + * 32 bits CHRPs :-( + * + * Hopefully, the sysfs insterface is immune to that gunk. Once X + * has been fixed (and the fix spread enough), we can re-enable the + * 2 lines below and pass down a BAR value to userland. In that case + * we'll also have to re-enable the matching code in + * __pci_mmap_make_offset(). + * + * BenH. + */ +#if 0 + else if (rsrc->flags & IORESOURCE_MEM) + offset = hose->pci_mem_offset; +#endif - *start = rsrc->start + offset; - *end = rsrc->end + offset; + *start = rsrc->start - offset; + *end = rsrc->end - offset; } struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node) diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index 9179f0739ea..95776b6af4e 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -208,7 +208,7 @@ EXPORT_SYMBOL(mmu_hash_lock); /* For MOL */ extern long *intercept_table; EXPORT_SYMBOL(intercept_table); #endif /* CONFIG_PPC_STD_MMU_32 */ -#if defined(CONFIG_40x) || defined(CONFIG_BOOKE) +#ifdef CONFIG_PPC_DCR_NATIVE EXPORT_SYMBOL(__mtdcr); EXPORT_SYMBOL(__mfdcr); #endif diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index c18dbe77fdc..1fc732a552d 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -804,6 +804,56 @@ static unsigned long __init dt_mem_next_cell(int s, cell_t **cellp) return of_read_ulong(p, s); } +#ifdef CONFIG_PPC_PSERIES +/* + * Interpret the ibm,dynamic-memory property in the + * /ibm,dynamic-reconfiguration-memory node. + * This contains a list of memory blocks along with NUMA affinity + * information. + */ +static int __init early_init_dt_scan_drconf_memory(unsigned long node) +{ + cell_t *dm, *ls; + unsigned long l, n; + unsigned long base, size, lmb_size, flags; + + ls = (cell_t *)of_get_flat_dt_prop(node, "ibm,lmb-size", &l); + if (ls == NULL || l < dt_root_size_cells * sizeof(cell_t)) + return 0; + lmb_size = dt_mem_next_cell(dt_root_size_cells, &ls); + + dm = (cell_t *)of_get_flat_dt_prop(node, "ibm,dynamic-memory", &l); + if (dm == NULL || l < sizeof(cell_t)) + return 0; + + n = *dm++; /* number of entries */ + if (l < (n * (dt_root_addr_cells + 4) + 1) * sizeof(cell_t)) + return 0; + + for (; n != 0; --n) { + base = dt_mem_next_cell(dt_root_addr_cells, &dm); + flags = dm[3]; + /* skip DRC index, pad, assoc. list index, flags */ + dm += 4; + /* skip this block if the reserved bit is set in flags (0x80) + or if the block is not assigned to this partition (0x8) */ + if ((flags & 0x80) || !(flags & 0x8)) + continue; + size = lmb_size; + if (iommu_is_off) { + if (base >= 0x80000000ul) + continue; + if ((base + size) > 0x80000000ul) + size = 0x80000000ul - base; + } + lmb_add(base, size); + } + lmb_dump_all(); + return 0; +} +#else +#define early_init_dt_scan_drconf_memory(node) 0 +#endif /* CONFIG_PPC_PSERIES */ static int __init early_init_dt_scan_memory(unsigned long node, const char *uname, int depth, void *data) @@ -812,6 +862,11 @@ static int __init early_init_dt_scan_memory(unsigned long node, cell_t *reg, *endp; unsigned long l; + /* Look for the ibm,dynamic-reconfiguration-memory node */ + if (depth == 1 && + strcmp(uname, "ibm,dynamic-reconfiguration-memory") == 0) + return early_init_dt_scan_drconf_memory(node); + /* We are scanning "memory" nodes only */ if (type == NULL) { /* diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 46cf32670dd..520ef42f642 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -679,7 +679,7 @@ static unsigned char ibm_architecture_vec[] = { /* option vector 5: PAPR/OF options */ 3 - 2, /* length */ 0, /* don't ignore, don't halt */ - OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES, + OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES | OV5_DRCONF_MEMORY, }; /* Old method - ELF header with PT_NOTE sections */ diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 387ed0d9ad6..76b5d7ebdcc 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -303,6 +303,12 @@ int rtas_token(const char *service) } EXPORT_SYMBOL(rtas_token); +int rtas_service_present(const char *service) +{ + return rtas_token(service) != RTAS_UNKNOWN_SERVICE; +} +EXPORT_SYMBOL(rtas_service_present); + #ifdef CONFIG_RTAS_ERROR_LOGGING /* * Return the firmware-specified size of the error log buffer @@ -810,32 +816,6 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs) return 0; } -#ifdef CONFIG_HOTPLUG_CPU -/* This version can't take the spinlock, because it never returns */ -static struct rtas_args rtas_stop_self_args = { - /* The token is initialized for real in setup_system() */ - .token = RTAS_UNKNOWN_SERVICE, - .nargs = 0, - .nret = 1, - .rets = &rtas_stop_self_args.args[0], -}; - -void rtas_stop_self(void) -{ - struct rtas_args *rtas_args = &rtas_stop_self_args; - - local_irq_disable(); - - BUG_ON(rtas_args->token == RTAS_UNKNOWN_SERVICE); - - printk("cpu %u (hwid %u) Ready to die...\n", - smp_processor_id(), hard_smp_processor_id()); - enter_rtas(__pa(rtas_args)); - - panic("Alas, I survived.\n"); -} -#endif - /* * Call early during boot, before mem init or bootmem, to retrieve the RTAS * informations from the device-tree and allocate the RMO buffer for userland @@ -880,9 +860,6 @@ void __init rtas_initialize(void) #endif rtas_rmo_buf = lmb_alloc_base(RTAS_RMOBUF_MAX, PAGE_SIZE, rtas_region); -#ifdef CONFIG_HOTPLUG_CPU - rtas_stop_self_args.token = rtas_token("stop-self"); -#endif /* CONFIG_HOTPLUG_CPU */ #ifdef CONFIG_RTAS_ERROR_LOGGING rtas_last_error_token = rtas_token("rtas-last-error"); #endif diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index 63ed265b7f0..400ab2b946e 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -181,6 +181,8 @@ SYSFS_PMCSETUP(pmc6, SPRN_PMC6); SYSFS_PMCSETUP(pmc7, SPRN_PMC7); SYSFS_PMCSETUP(pmc8, SPRN_PMC8); SYSFS_PMCSETUP(purr, SPRN_PURR); +SYSFS_PMCSETUP(spurr, SPRN_SPURR); +SYSFS_PMCSETUP(dscr, SPRN_DSCR); static SYSDEV_ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0); static SYSDEV_ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1); @@ -194,6 +196,8 @@ static SYSDEV_ATTR(pmc6, 0600, show_pmc6, store_pmc6); static SYSDEV_ATTR(pmc7, 0600, show_pmc7, store_pmc7); static SYSDEV_ATTR(pmc8, 0600, show_pmc8, store_pmc8); static SYSDEV_ATTR(purr, 0600, show_purr, NULL); +static SYSDEV_ATTR(spurr, 0600, show_spurr, NULL); +static SYSDEV_ATTR(dscr, 0600, show_dscr, store_dscr); static void register_cpu_online(unsigned int cpu) { @@ -231,6 +235,12 @@ static void register_cpu_online(unsigned int cpu) if (cpu_has_feature(CPU_FTR_PURR)) sysdev_create_file(s, &attr_purr); + + if (cpu_has_feature(CPU_FTR_SPURR)) + sysdev_create_file(s, &attr_spurr); + + if (cpu_has_feature(CPU_FTR_DSCR)) + sysdev_create_file(s, &attr_dscr); } #ifdef CONFIG_HOTPLUG_CPU @@ -272,6 +282,12 @@ static void unregister_cpu_online(unsigned int cpu) if (cpu_has_feature(CPU_FTR_PURR)) sysdev_remove_file(s, &attr_purr); + + if (cpu_has_feature(CPU_FTR_SPURR)) + sysdev_remove_file(s, &attr_spurr); + + if (cpu_has_feature(CPU_FTR_DSCR)) + sysdev_remove_file(s, &attr_dscr); } #endif /* CONFIG_HOTPLUG_CPU */ diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 0d4e203fa7a..535f5066564 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -32,6 +32,7 @@ #include <linux/kprobes.h> #include <linux/kexec.h> #include <linux/backlight.h> +#include <linux/bug.h> #include <asm/kdebug.h> #include <asm/pgtable.h> @@ -727,54 +728,9 @@ static int emulate_instruction(struct pt_regs *regs) return -EINVAL; } -/* - * Look through the list of trap instructions that are used for BUG(), - * BUG_ON() and WARN_ON() and see if we hit one. At this point we know - * that the exception was caused by a trap instruction of some kind. - * Returns 1 if we should continue (i.e. it was a WARN_ON) or 0 - * otherwise. - */ -extern struct bug_entry __start___bug_table[], __stop___bug_table[]; - -#ifndef CONFIG_MODULES -#define module_find_bug(x) NULL -#endif - -struct bug_entry *find_bug(unsigned long bugaddr) +int is_valid_bugaddr(unsigned long addr) { - struct bug_entry *bug; - - for (bug = __start___bug_table; bug < __stop___bug_table; ++bug) - if (bugaddr == bug->bug_addr) - return bug; - return module_find_bug(bugaddr); -} - -static int check_bug_trap(struct pt_regs *regs) -{ - struct bug_entry *bug; - unsigned long addr; - - if (regs->msr & MSR_PR) - return 0; /* not in kernel */ - addr = regs->nip; /* address of trap instruction */ - if (addr < PAGE_OFFSET) - return 0; - bug = find_bug(regs->nip); - if (bug == NULL) - return 0; - if (bug->line & BUG_WARNING_TRAP) { - /* this is a WARN_ON rather than BUG/BUG_ON */ - printk(KERN_ERR "Badness in %s at %s:%ld\n", - bug->function, bug->file, - bug->line & ~BUG_WARNING_TRAP); - dump_stack(); - return 1; - } - printk(KERN_CRIT "kernel BUG in %s at %s:%ld!\n", - bug->function, bug->file, bug->line); - - return 0; + return is_kernel_addr(addr); } void __kprobes program_check_exception(struct pt_regs *regs) @@ -782,6 +738,8 @@ void __kprobes program_check_exception(struct pt_regs *regs) unsigned int reason = get_reason(regs); extern int do_mathemu(struct pt_regs *regs); + /* We can now get here via a FP Unavailable exception if the core + * has no FPU, in that case no reason flags will be set */ #ifdef CONFIG_MATH_EMULATION /* (reason & REASON_ILLEGAL) would be the obvious thing here, * but there seems to be a hardware bug on the 405GP (RevD) @@ -808,7 +766,9 @@ void __kprobes program_check_exception(struct pt_regs *regs) return; if (debugger_bpt(regs)) return; - if (check_bug_trap(regs)) { + + if (!(regs->msr & MSR_PR) && /* not user-mode */ + report_bug(regs->nip) == BUG_TRAP_TYPE_WARN) { regs->nip += 4; return; } diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 04b98671a06..04b8e71bf5b 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -62,11 +62,7 @@ SECTIONS __stop___ex_table = .; } - __bug_table : { - __start___bug_table = .; - *(__bug_table) - __stop___bug_table = .; - } + BUG_TABLE /* * Init sections discarded at runtime diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 9da01dc8cfd..262790910ff 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -295,6 +295,63 @@ static unsigned long __init numa_enforce_memory_limit(unsigned long start, return lmb_end_of_DRAM() - start; } +/* + * Extract NUMA information from the ibm,dynamic-reconfiguration-memory + * node. This assumes n_mem_{addr,size}_cells have been set. + */ +static void __init parse_drconf_memory(struct device_node *memory) +{ + const unsigned int *lm, *dm, *aa; + unsigned int ls, ld, la; + unsigned int n, aam, aalen; + unsigned long lmb_size, size; + int nid, default_nid = 0; + unsigned int start, ai, flags; + + lm = get_property(memory, "ibm,lmb-size", &ls); + dm = get_property(memory, "ibm,dynamic-memory", &ld); + aa = get_property(memory, "ibm,associativity-lookup-arrays", &la); + if (!lm || !dm || !aa || + ls < sizeof(unsigned int) || ld < sizeof(unsigned int) || + la < 2 * sizeof(unsigned int)) + return; + + lmb_size = read_n_cells(n_mem_size_cells, &lm); + n = *dm++; /* number of LMBs */ + aam = *aa++; /* number of associativity lists */ + aalen = *aa++; /* length of each associativity list */ + if (ld < (n * (n_mem_addr_cells + 4) + 1) * sizeof(unsigned int) || + la < (aam * aalen + 2) * sizeof(unsigned int)) + return; + + for (; n != 0; --n) { + start = read_n_cells(n_mem_addr_cells, &dm); + ai = dm[2]; + flags = dm[3]; + dm += 4; + /* 0x80 == reserved, 0x8 = assigned to us */ + if ((flags & 0x80) || !(flags & 0x8)) + continue; + nid = default_nid; + /* flags & 0x40 means associativity index is invalid */ + if (min_common_depth > 0 && min_common_depth <= aalen && + (flags & 0x40) == 0 && ai < aam) { + /* this is like of_node_to_nid_single */ + nid = aa[ai * aalen + min_common_depth - 1]; + if (nid == 0xffff || nid >= MAX_NUMNODES) + nid = default_nid; + } + node_set_online(nid); + + size = numa_enforce_memory_limit(start, lmb_size); + if (!size) + continue; + + add_active_range(nid, start >> PAGE_SHIFT, + (start >> PAGE_SHIFT) + (size >> PAGE_SHIFT)); + } +} + static int __init parse_numa_properties(void) { struct device_node *cpu = NULL; @@ -385,6 +442,14 @@ new_range: goto new_range; } + /* + * Now do the same thing for each LMB listed in the ibm,dynamic-memory + * property in the ibm,dynamic-reconfiguration-memory node. + */ + memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory"); + if (memory) + parse_drconf_memory(memory); + return 0; } diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c index a375c15b431..eaff71e74fb 100644 --- a/arch/powerpc/platforms/52xx/lite5200.c +++ b/arch/powerpc/platforms/52xx/lite5200.c @@ -40,8 +40,6 @@ #include <asm/prom.h> #include <asm/udbg.h> #include <sysdev/fsl_soc.h> -#include <asm/qe.h> -#include <asm/qe_ic.h> #include <asm/of_platform.h> #include <asm/mpc52xx.h> diff --git a/arch/powerpc/platforms/cell/cbe_thermal.c b/arch/powerpc/platforms/cell/cbe_thermal.c index 616a0a3fd0e..70e0d968d30 100644 --- a/arch/powerpc/platforms/cell/cbe_thermal.c +++ b/arch/powerpc/platforms/cell/cbe_thermal.c @@ -115,6 +115,7 @@ static struct sysdev_attribute attr_spu_temperature = { static struct attribute *spu_attributes[] = { &attr_spu_temperature.attr, + NULL, }; static struct attribute_group spu_attribute_group = { @@ -135,6 +136,7 @@ static struct sysdev_attribute attr_ppe_temperature1 = { static struct attribute *ppe_attributes[] = { &attr_ppe_temperature0.attr, &attr_ppe_temperature1.attr, + NULL, }; static struct attribute_group ppe_attribute_group = { diff --git a/arch/powerpc/platforms/cell/pmu.c b/arch/powerpc/platforms/cell/pmu.c index 99c612025e8..d04ae1671e6 100644 --- a/arch/powerpc/platforms/cell/pmu.c +++ b/arch/powerpc/platforms/cell/pmu.c @@ -382,11 +382,14 @@ static irqreturn_t cbe_pm_irq(int irq, void *dev_id) return IRQ_HANDLED; } -int __init cbe_init_pm_irq(void) +static int __init cbe_init_pm_irq(void) { unsigned int irq; int rc, node; + if (!machine_is(cell)) + return 0; + for_each_node(node) { irq = irq_create_mapping(NULL, IIC_IRQ_IOEX_PMI | (node << IIC_IRQ_NODE_SHIFT)); diff --git a/arch/powerpc/platforms/cell/spufs/coredump.c b/arch/powerpc/platforms/cell/spufs/coredump.c index 26945c491f6..725e1956115 100644 --- a/arch/powerpc/platforms/cell/spufs/coredump.c +++ b/arch/powerpc/platforms/cell/spufs/coredump.c @@ -147,7 +147,7 @@ static int spufs_arch_notes_size(void) struct fdtable *fdt = files_fdtable(current->files); int size = 0, fd; - for (fd = 0; fd < fdt->max_fdset && fd < fdt->max_fds; fd++) { + for (fd = 0; fd < fdt->max_fds; fd++) { if (FD_ISSET(fd, fdt->open_fds)) { struct file *file = fcheck(fd); diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c index 3a32deda765..3f6a69f6719 100644 --- a/arch/powerpc/platforms/maple/pci.c +++ b/arch/powerpc/platforms/maple/pci.c @@ -562,7 +562,7 @@ void __init maple_pci_init(void) for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) { if (np->name == NULL) continue; - if (strcmp(np->name, "pci") == 0) { + if (!strcmp(np->name, "pci") || !strcmp(np->name, "pcie")) { if (add_bridge(np) == 0) of_node_get(np); } diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c index 094989d50ba..f12d5c69e74 100644 --- a/arch/powerpc/platforms/maple/setup.c +++ b/arch/powerpc/platforms/maple/setup.c @@ -60,6 +60,7 @@ #include <asm/of_device.h> #include <asm/lmb.h> #include <asm/mpic.h> +#include <asm/rtas.h> #include <asm/udbg.h> #include "maple.h" @@ -166,6 +167,16 @@ struct smp_ops_t maple_smp_ops = { }; #endif /* CONFIG_SMP */ +static void __init maple_use_rtas_reboot_and_halt_if_present(void) +{ + if (rtas_service_present("system-reboot") && + rtas_service_present("power-off")) { + ppc_md.restart = rtas_restart; + ppc_md.power_off = rtas_power_off; + ppc_md.halt = rtas_halt; + } +} + void __init maple_setup_arch(void) { /* init to some ~sane value until calibrate_delay() runs */ @@ -181,6 +192,7 @@ void __init maple_setup_arch(void) #ifdef CONFIG_DUMMY_CONSOLE conswitchp = &dummy_con; #endif + maple_use_rtas_reboot_and_halt_if_present(); printk(KERN_DEBUG "Using native/NAP idle loop\n"); } diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig index 451bfcd5502..de52ec4e9e5 100644 --- a/arch/powerpc/platforms/ps3/Kconfig +++ b/arch/powerpc/platforms/ps3/Kconfig @@ -40,4 +40,15 @@ config PS3_USE_LPAR_ADDR If you have any doubt, choose the default y. +config PS3_VUART + depends on PPC_PS3 + bool "PS3 Virtual UART support" + default y + help + Include support for the PS3 Virtual UART. + + This support is required for several system services + including the System Manager and AV Settings. In + general, all users will say Y. + endmenu diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index 997243a91be..69590fbf83d 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -10,6 +10,8 @@ obj-$(CONFIG_XICS) += xics.o obj-$(CONFIG_SCANLOG) += scanlog.o obj-$(CONFIG_EEH) += eeh.o eeh_cache.o eeh_driver.o eeh_event.o +obj-$(CONFIG_HOTPLUG_CPU) += hotplug-cpu.o + obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o obj-$(CONFIG_HVCS) += hvcserver.o obj-$(CONFIG_HCALL_STATS) += hvCall_inst.o diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 3c2d63ebf78..da6e5362e7c 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -337,6 +337,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) printk (KERN_ERR "EEH: Device driver ignored %d bad reads, panicing\n", pdn->eeh_check_count); dump_stack(); + msleep(5000); /* re-read the slot reset state */ if (read_slot_reset_state(pdn, rets) != 0) diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c index c2bc9904f1c..cbd6b0711ab 100644 --- a/arch/powerpc/platforms/pseries/eeh_driver.c +++ b/arch/powerpc/platforms/pseries/eeh_driver.c @@ -170,14 +170,19 @@ static void eeh_report_reset(struct pci_dev *dev, void *userdata) static void eeh_report_resume(struct pci_dev *dev, void *userdata) { struct pci_driver *driver = dev->driver; + struct device_node *dn = pci_device_to_OF_node(dev); dev->error_state = pci_channel_io_normal; if (!driver) return; - if (!driver->err_handler) - return; - if (!driver->err_handler->resume) + + if ((PCI_DN(dn)->eeh_mode) & EEH_MODE_IRQ_DISABLED) { + PCI_DN(dn)->eeh_mode &= ~EEH_MODE_IRQ_DISABLED; + enable_irq(dev->irq); + } + if (!driver->err_handler || + !driver->err_handler->resume) return; driver->err_handler->resume(dev); @@ -407,6 +412,8 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event) if (rc) result = PCI_ERS_RESULT_NEED_RESET; + else + result = PCI_ERS_RESULT_RECOVERED; } /* If any device has a hard failure, then shut off everything. */ diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c new file mode 100644 index 00000000000..f460b9cbfd4 --- /dev/null +++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c @@ -0,0 +1,275 @@ +/* + * pseries CPU Hotplug infrastructure. + * + * Split out from arch/powerpc/platforms/pseries/setup.c + * arch/powerpc/kernel/rtas.c, and arch/powerpc/platforms/pseries/smp.c + * + * Peter Bergner, IBM March 2001. + * Copyright (C) 2001 IBM. + * Dave Engebretsen, Peter Bergner, and + * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com + * Plus various changes from other IBM teams... + * + * Copyright (C) 2006 Michael Ellerman, IBM Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/cpu.h> +#include <asm/system.h> +#include <asm/prom.h> +#include <asm/rtas.h> +#include <asm/firmware.h> +#include <asm/machdep.h> +#include <asm/vdso_datapage.h> +#include <asm/pSeries_reconfig.h> +#include "xics.h" + +/* This version can't take the spinlock, because it never returns */ +static struct rtas_args rtas_stop_self_args = { + .token = RTAS_UNKNOWN_SERVICE, + .nargs = 0, + .nret = 1, + .rets = &rtas_stop_self_args.args[0], +}; + +static void rtas_stop_self(void) +{ + struct rtas_args *args = &rtas_stop_self_args; + + local_irq_disable(); + + BUG_ON(args->token == RTAS_UNKNOWN_SERVICE); + + printk("cpu %u (hwid %u) Ready to die...\n", + smp_processor_id(), hard_smp_processor_id()); + enter_rtas(__pa(args)); + + panic("Alas, I survived.\n"); +} + +static void pseries_mach_cpu_die(void) +{ + local_irq_disable(); + idle_task_exit(); + xics_teardown_cpu(0); + rtas_stop_self(); + /* Should never get here... */ + BUG(); + for(;;); +} + +static int qcss_tok; /* query-cpu-stopped-state token */ + +/* Get state of physical CPU. + * Return codes: + * 0 - The processor is in the RTAS stopped state + * 1 - stop-self is in progress + * 2 - The processor is not in the RTAS stopped state + * -1 - Hardware Error + * -2 - Hardware Busy, Try again later. + */ +static int query_cpu_stopped(unsigned int pcpu) +{ + int cpu_status, status; + + status = rtas_call(qcss_tok, 1, 2, &cpu_status, pcpu); + if (status != 0) { + printk(KERN_ERR + "RTAS query-cpu-stopped-state failed: %i\n", status); + return status; + } + + return cpu_status; +} + +static int pseries_cpu_disable(void) +{ + int cpu = smp_processor_id(); + + cpu_clear(cpu, cpu_online_map); + vdso_data->processorCount--; + + /*fix boot_cpuid here*/ + if (cpu == boot_cpuid) + boot_cpuid = any_online_cpu(cpu_online_map); + + /* FIXME: abstract this to not be platform specific later on */ + xics_migrate_irqs_away(); + return 0; +} + +static void pseries_cpu_die(unsigned int cpu) +{ + int tries; + int cpu_status; + unsigned int pcpu = get_hard_smp_processor_id(cpu); + + for (tries = 0; tries < 25; tries++) { + cpu_status = query_cpu_stopped(pcpu); + if (cpu_status == 0 || cpu_status == -1) + break; + msleep(200); + } + if (cpu_status != 0) { + printk("Querying DEAD? cpu %i (%i) shows %i\n", + cpu, pcpu, cpu_status); + } + + /* Isolation and deallocation are definatly done by + * drslot_chrp_cpu. If they were not they would be + * done here. Change isolate state to Isolate and + * change allocation-state to Unusable. + */ + paca[cpu].cpu_start = 0; +} + +/* + * Update cpu_present_map and paca(s) for a new cpu node. The wrinkle + * here is that a cpu device node may represent up to two logical cpus + * in the SMT case. We must honor the assumption in other code that + * the logical ids for sibling SMT threads x and y are adjacent, such + * that x^1 == y and y^1 == x. + */ +static int pseries_add_processor(struct device_node *np) +{ + unsigned int cpu; + cpumask_t candidate_map, tmp = CPU_MASK_NONE; + int err = -ENOSPC, len, nthreads, i; + const u32 *intserv; + + intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len); + if (!intserv) + return 0; + + nthreads = len / sizeof(u32); + for (i = 0; i < nthreads; i++) + cpu_set(i, tmp); + + lock_cpu_hotplug(); + + BUG_ON(!cpus_subset(cpu_present_map, cpu_possible_map)); + + /* Get a bitmap of unoccupied slots. */ + cpus_xor(candidate_map, cpu_possible_map, cpu_present_map); + if (cpus_empty(candidate_map)) { + /* If we get here, it most likely means that NR_CPUS is + * less than the partition's max processors setting. + */ + printk(KERN_ERR "Cannot add cpu %s; this system configuration" + " supports %d logical cpus.\n", np->full_name, + cpus_weight(cpu_possible_map)); + goto out_unlock; + } + + while (!cpus_empty(tmp)) + if (cpus_subset(tmp, candidate_map)) + /* Found a range where we can insert the new cpu(s) */ + break; + else + cpus_shift_left(tmp, tmp, nthreads); + + if (cpus_empty(tmp)) { + printk(KERN_ERR "Unable to find space in cpu_present_map for" + " processor %s with %d thread(s)\n", np->name, + nthreads); + goto out_unlock; + } + + for_each_cpu_mask(cpu, tmp) { + BUG_ON(cpu_isset(cpu, cpu_present_map)); + cpu_set(cpu, cpu_present_map); + set_hard_smp_processor_id(cpu, *intserv++); + } + err = 0; +out_unlock: + unlock_cpu_hotplug(); + return err; +} + +/* + * Update the present map for a cpu node which is going away, and set + * the hard id in the paca(s) to -1 to be consistent with boot time + * convention for non-present cpus. + */ +static void pseries_remove_processor(struct device_node *np) +{ + unsigned int cpu; + int len, nthreads, i; + const u32 *intserv; + + intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len); + if (!intserv) + return; + + nthreads = len / sizeof(u32); + + lock_cpu_hotplug(); + for (i = 0; i < nthreads; i++) { + for_each_present_cpu(cpu) { + if (get_hard_smp_processor_id(cpu) != intserv[i]) + continue; + BUG_ON(cpu_online(cpu)); + cpu_clear(cpu, cpu_present_map); + set_hard_smp_processor_id(cpu, -1); + break; + } + if (cpu == NR_CPUS) + printk(KERN_WARNING "Could not find cpu to remove " + "with physical id 0x%x\n", intserv[i]); + } + unlock_cpu_hotplug(); +} + +static int pseries_smp_notifier(struct notifier_block *nb, + unsigned long action, void *node) +{ + int err = NOTIFY_OK; + + switch (action) { + case PSERIES_RECONFIG_ADD: + if (pseries_add_processor(node)) + err = NOTIFY_BAD; + break; + case PSERIES_RECONFIG_REMOVE: + pseries_remove_processor(node); + break; + default: + err = NOTIFY_DONE; + break; + } + return err; +} + +static struct notifier_block pseries_smp_nb = { + .notifier_call = pseries_smp_notifier, +}; + +static int __init pseries_cpu_hotplug_init(void) +{ + rtas_stop_self_args.token = rtas_token("stop-self"); + qcss_tok = rtas_token("query-cpu-stopped-state"); + + if (rtas_stop_self_args.token == RTAS_UNKNOWN_SERVICE || + qcss_tok == RTAS_UNKNOWN_SERVICE) { + printk(KERN_INFO "CPU Hotplug not supported by firmware " + "- disabling.\n"); + return 0; + } + + ppc_md.cpu_die = pseries_mach_cpu_die; + smp_ops->cpu_disable = pseries_cpu_disable; + smp_ops->cpu_die = pseries_cpu_die; + + /* Processors can be added/removed only on LPAR */ + if (firmware_has_feature(FW_FEATURE_LPAR)) + pSeries_reconfig_notifier_register(&pseries_smp_nb); + + return 0; +} +arch_initcall(pseries_cpu_hotplug_init); diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 0dc2548ca9b..042ecae107a 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -347,21 +347,6 @@ static int __init pSeries_init_panel(void) } arch_initcall(pSeries_init_panel); -#ifdef CONFIG_HOTPLUG_CPU -static void pSeries_mach_cpu_die(void) -{ - local_irq_disable(); - idle_task_exit(); - xics_teardown_cpu(0); - rtas_stop_self(); - /* Should never get here... */ - BUG(); - for(;;); -} -#else -#define pSeries_mach_cpu_die NULL -#endif - static int pseries_set_dabr(unsigned long dabr) { return plpar_hcall_norets(H_SET_DABR, dabr); @@ -437,19 +422,14 @@ static int __init pSeries_probe_hypertas(unsigned long node, if (of_get_flat_dt_prop(node, "ibm,hypertas-functions", NULL) != NULL) powerpc_firmware_features |= FW_FEATURE_LPAR; - if (firmware_has_feature(FW_FEATURE_LPAR)) - hpte_init_lpar(); - else - hpte_init_native(); - return 1; } static int __init pSeries_probe(void) { unsigned long root = of_get_flat_dt_root(); - char *dtype = of_get_flat_dt_prop(of_get_flat_dt_root(), - "device_type", NULL); + char *dtype = of_get_flat_dt_prop(root, "device_type", NULL); + if (dtype == NULL) return 0; if (strcmp(dtype, "chrp")) @@ -467,6 +447,11 @@ static int __init pSeries_probe(void) /* Now try to figure out if we are running on LPAR */ of_scan_flat_dt(pSeries_probe_hypertas, NULL); + if (firmware_has_feature(FW_FEATURE_LPAR)) + hpte_init_lpar(); + else + hpte_init_native(); + DBG("Machine is%s LPAR !\n", (powerpc_firmware_features & FW_FEATURE_LPAR) ? "" : " not"); @@ -561,7 +546,6 @@ define_machine(pseries) { .power_off = rtas_power_off, .halt = rtas_halt, .panic = rtas_os_term, - .cpu_die = pSeries_mach_cpu_die, .get_boot_time = rtas_get_boot_time, .get_rtc_time = rtas_get_rtc_time, .set_rtc_time = rtas_set_rtc_time, diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index c6624b8a0e7..4408518eaeb 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -64,197 +64,6 @@ static cpumask_t of_spin_map; extern void generic_secondary_smp_init(unsigned long); -#ifdef CONFIG_HOTPLUG_CPU - -/* Get state of physical CPU. - * Return codes: - * 0 - The processor is in the RTAS stopped state - * 1 - stop-self is in progress - * 2 - The processor is not in the RTAS stopped state - * -1 - Hardware Error - * -2 - Hardware Busy, Try again later. - */ -static int query_cpu_stopped(unsigned int pcpu) -{ - int cpu_status; - int status, qcss_tok; - - qcss_tok = rtas_token("query-cpu-stopped-state"); - if (qcss_tok == RTAS_UNKNOWN_SERVICE) - return -1; - status = rtas_call(qcss_tok, 1, 2, &cpu_status, pcpu); - if (status != 0) { - printk(KERN_ERR - "RTAS query-cpu-stopped-state failed: %i\n", status); - return status; - } - - return cpu_status; -} - -static int pSeries_cpu_disable(void) -{ - int cpu = smp_processor_id(); - - cpu_clear(cpu, cpu_online_map); - vdso_data->processorCount--; - - /*fix boot_cpuid here*/ - if (cpu == boot_cpuid) - boot_cpuid = any_online_cpu(cpu_online_map); - - /* FIXME: abstract this to not be platform specific later on */ - xics_migrate_irqs_away(); - return 0; -} - -static void pSeries_cpu_die(unsigned int cpu) -{ - int tries; - int cpu_status; - unsigned int pcpu = get_hard_smp_processor_id(cpu); - - for (tries = 0; tries < 25; tries++) { - cpu_status = query_cpu_stopped(pcpu); - if (cpu_status == 0 || cpu_status == -1) - break; - msleep(200); - } - if (cpu_status != 0) { - printk("Querying DEAD? cpu %i (%i) shows %i\n", - cpu, pcpu, cpu_status); - } - - /* Isolation and deallocation are definatly done by - * drslot_chrp_cpu. If they were not they would be - * done here. Change isolate state to Isolate and - * change allocation-state to Unusable. - */ - paca[cpu].cpu_start = 0; -} - -/* - * Update cpu_present_map and paca(s) for a new cpu node. The wrinkle - * here is that a cpu device node may represent up to two logical cpus - * in the SMT case. We must honor the assumption in other code that - * the logical ids for sibling SMT threads x and y are adjacent, such - * that x^1 == y and y^1 == x. - */ -static int pSeries_add_processor(struct device_node *np) -{ - unsigned int cpu; - cpumask_t candidate_map, tmp = CPU_MASK_NONE; - int err = -ENOSPC, len, nthreads, i; - const u32 *intserv; - - intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len); - if (!intserv) - return 0; - - nthreads = len / sizeof(u32); - for (i = 0; i < nthreads; i++) - cpu_set(i, tmp); - - lock_cpu_hotplug(); - - BUG_ON(!cpus_subset(cpu_present_map, cpu_possible_map)); - - /* Get a bitmap of unoccupied slots. */ - cpus_xor(candidate_map, cpu_possible_map, cpu_present_map); - if (cpus_empty(candidate_map)) { - /* If we get here, it most likely means that NR_CPUS is - * less than the partition's max processors setting. - */ - printk(KERN_ERR "Cannot add cpu %s; this system configuration" - " supports %d logical cpus.\n", np->full_name, - cpus_weight(cpu_possible_map)); - goto out_unlock; - } - - while (!cpus_empty(tmp)) - if (cpus_subset(tmp, candidate_map)) - /* Found a range where we can insert the new cpu(s) */ - break; - else - cpus_shift_left(tmp, tmp, nthreads); - - if (cpus_empty(tmp)) { - printk(KERN_ERR "Unable to find space in cpu_present_map for" - " processor %s with %d thread(s)\n", np->name, - nthreads); - goto out_unlock; - } - - for_each_cpu_mask(cpu, tmp) { - BUG_ON(cpu_isset(cpu, cpu_present_map)); - cpu_set(cpu, cpu_present_map); - set_hard_smp_processor_id(cpu, *intserv++); - } - err = 0; -out_unlock: - unlock_cpu_hotplug(); - return err; -} - -/* - * Update the present map for a cpu node which is going away, and set - * the hard id in the paca(s) to -1 to be consistent with boot time - * convention for non-present cpus. - */ -static void pSeries_remove_processor(struct device_node *np) -{ - unsigned int cpu; - int len, nthreads, i; - const u32 *intserv; - - intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len); - if (!intserv) - return; - - nthreads = len / sizeof(u32); - - lock_cpu_hotplug(); - for (i = 0; i < nthreads; i++) { - for_each_present_cpu(cpu) { - if (get_hard_smp_processor_id(cpu) != intserv[i]) - continue; - BUG_ON(cpu_online(cpu)); - cpu_clear(cpu, cpu_present_map); - set_hard_smp_processor_id(cpu, -1); - break; - } - if (cpu == NR_CPUS) - printk(KERN_WARNING "Could not find cpu to remove " - "with physical id 0x%x\n", intserv[i]); - } - unlock_cpu_hotplug(); -} - -static int pSeries_smp_notifier(struct notifier_block *nb, unsigned long action, void *node) -{ - int err = NOTIFY_OK; - - switch (action) { - case PSERIES_RECONFIG_ADD: - if (pSeries_add_processor(node)) - err = NOTIFY_BAD; - break; - case PSERIES_RECONFIG_REMOVE: - pSeries_remove_processor(node); - break; - default: - err = NOTIFY_DONE; - break; - } - return err; -} - -static struct notifier_block pSeries_smp_nb = { - .notifier_call = pSeries_smp_notifier, -}; - -#endif /* CONFIG_HOTPLUG_CPU */ - /** * smp_startup_cpu() - start the given cpu * @@ -422,15 +231,6 @@ static void __init smp_init_pseries(void) DBG(" -> smp_init_pSeries()\n"); -#ifdef CONFIG_HOTPLUG_CPU - smp_ops->cpu_disable = pSeries_cpu_disable; - smp_ops->cpu_die = pSeries_cpu_die; - - /* Processors can be added/removed only on LPAR */ - if (firmware_has_feature(FW_FEATURE_LPAR)) - pSeries_reconfig_notifier_register(&pSeries_smp_nb); -#endif - /* Mark threads which are still spinning in hold loops. */ if (cpu_has_feature(CPU_FTR_SMT)) { for_each_present_cpu(i) { diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 6cc34597a62..04d4917eb30 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -5,7 +5,8 @@ endif obj-$(CONFIG_MPIC) += mpic.o obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o obj-$(CONFIG_PPC_MPC106) += grackle.o -obj-$(CONFIG_PPC_DCR) += dcr.o dcr-low.o +obj-$(CONFIG_PPC_DCR) += dcr.o +obj-$(CONFIG_PPC_DCR_NATIVE) += dcr-low.o obj-$(CONFIG_U3_DART) += dart_iommu.o obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o obj-$(CONFIG_FSL_SOC) += fsl_soc.o diff --git a/arch/powerpc/sysdev/dcr.S b/arch/powerpc/sysdev/dcr.S deleted file mode 100644 index 2078f39e2f1..00000000000 --- a/arch/powerpc/sysdev/dcr.S +++ /dev/null @@ -1,39 +0,0 @@ -/* - * "Indirect" DCR access - * - * Copyright (c) 2004 Eugene Surovegin <ebs@ebshome.net> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <asm/ppc_asm.h> -#include <asm/processor.h> - -#define DCR_ACCESS_PROLOG(table) \ - rlwinm r3,r3,4,18,27; \ - lis r5,table@h; \ - ori r5,r5,table@l; \ - add r3,r3,r5; \ - mtctr r3; \ - bctr - -_GLOBAL(__mfdcr) - DCR_ACCESS_PROLOG(__mfdcr_table) - -_GLOBAL(__mtdcr) - DCR_ACCESS_PROLOG(__mtdcr_table) - -__mfdcr_table: - mfdcr r3,0; blr -__mtdcr_table: - mtdcr 0,r4; blr - -dcr = 1 - .rept 1023 - mfdcr r3,dcr; blr - mtdcr dcr,r4; blr - dcr = dcr + 1 - .endr diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c index 6995f51b948..74e48d94f27 100644 --- a/arch/powerpc/sysdev/qe_lib/qe_ic.c +++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c @@ -223,23 +223,15 @@ static void qe_ic_mask_irq(unsigned int virq) qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg, temp & ~qe_ic_info[src].mask); - spin_unlock_irqrestore(&qe_ic_lock, flags); -} - -static void qe_ic_mask_irq_and_ack(unsigned int virq) -{ - struct qe_ic *qe_ic = qe_ic_from_irq(virq); - unsigned int src = virq_to_hw(virq); - unsigned long flags; - u32 temp; - - spin_lock_irqsave(&qe_ic_lock, flags); - - temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg); - qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg, - temp & ~qe_ic_info[src].mask); - - /* There is nothing to do for ack here, ack is handled in ISR */ + /* Flush the above write before enabling interrupts; otherwise, + * spurious interrupts will sometimes happen. To be 100% sure + * that the write has reached the device before interrupts are + * enabled, the mask register would have to be read back; however, + * this is not required for correctness, only to avoid wasting + * time on a large number of spurious interrupts. In testing, + * a sync reduced the observed spurious interrupts to zero. + */ + mb(); spin_unlock_irqrestore(&qe_ic_lock, flags); } @@ -248,7 +240,7 @@ static struct irq_chip qe_ic_irq_chip = { .typename = " QEIC ", .unmask = qe_ic_unmask_irq, .mask = qe_ic_mask_irq, - .mask_ack = qe_ic_mask_irq_and_ack, + .mask_ack = qe_ic_mask_irq, }; static int qe_ic_host_match(struct irq_host *h, struct device_node *node) @@ -331,34 +323,22 @@ unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic) return irq_linear_revmap(qe_ic->irqhost, irq); } -/* FIXME: We mask all the QE Low interrupts while handling. We should - * let other interrupt come in, but BAD interrupts are generated */ void fastcall qe_ic_cascade_low(unsigned int irq, struct irq_desc *desc) { struct qe_ic *qe_ic = desc->handler_data; - struct irq_chip *chip = irq_desc[irq].chip; - unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic); - chip->mask_ack(irq); if (cascade_irq != NO_IRQ) generic_handle_irq(cascade_irq); - chip->unmask(irq); } -/* FIXME: We mask all the QE High interrupts while handling. We should - * let other interrupt come in, but BAD interrupts are generated */ void fastcall qe_ic_cascade_high(unsigned int irq, struct irq_desc *desc) { struct qe_ic *qe_ic = desc->handler_data; - struct irq_chip *chip = irq_desc[irq].chip; - unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic); - chip->mask_ack(irq); if (cascade_irq != NO_IRQ) generic_handle_irq(cascade_irq); - chip->unmask(irq); } void __init qe_ic_init(struct device_node *node, unsigned int flags) diff --git a/arch/powerpc/sysdev/rom.c b/arch/powerpc/sysdev/rom.c index bf5b3f10e6c..c855a3b298a 100644 --- a/arch/powerpc/sysdev/rom.c +++ b/arch/powerpc/sysdev/rom.c @@ -9,6 +9,7 @@ #include <linux/kernel.h> #include <asm/of_device.h> +#include <asm/of_platform.h> static int __init powerpc_flash_init(void) { diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index a34ed49e035..77540a2f770 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -22,6 +22,7 @@ #include <linux/sysrq.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/bug.h> #include <asm/ptrace.h> #include <asm/string.h> @@ -35,7 +36,6 @@ #include <asm/cputable.h> #include <asm/rtas.h> #include <asm/sstep.h> -#include <asm/bug.h> #include <asm/irq_regs.h> #include <asm/spu.h> #include <asm/spu_priv1.h> @@ -1346,7 +1346,7 @@ static void backtrace(struct pt_regs *excp) static void print_bug_trap(struct pt_regs *regs) { - struct bug_entry *bug; + const struct bug_entry *bug; unsigned long addr; if (regs->msr & MSR_PR) @@ -1357,11 +1357,11 @@ static void print_bug_trap(struct pt_regs *regs) bug = find_bug(regs->nip); if (bug == NULL) return; - if (bug->line & BUG_WARNING_TRAP) + if (is_warning_bug(bug)) return; - printf("kernel BUG in %s at %s:%d!\n", - bug->function, bug->file, (unsigned int)bug->line); + printf("kernel BUG at %s:%u!\n", + bug->file, bug->line); } void excprint(struct pt_regs *fp) diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c index 63808e01cb0..5e723c4c257 100644 --- a/arch/ppc/kernel/pci.c +++ b/arch/ppc/kernel/pci.c @@ -879,7 +879,7 @@ pci_resource_to_bus(struct pci_dev *pdev, struct resource *res) static struct resource *__pci_mmap_make_offset(struct pci_dev *dev, - unsigned long *offset, + resource_size_t *offset, enum pci_mmap_state mmap_state) { struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); @@ -891,7 +891,9 @@ static struct resource *__pci_mmap_make_offset(struct pci_dev *dev, /* If memory, add on the PCI bridge address offset */ if (mmap_state == pci_mmap_mem) { +#if 0 /* See comment in pci_resource_to_user() for why this is disabled */ *offset += hose->pci_mem_offset; +#endif res_bit = IORESOURCE_MEM; } else { io_offset = hose->io_base_virt - ___IO_BASE; @@ -1030,7 +1032,7 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine) { - unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; + resource_size_t offset = vma->vm_pgoff << PAGE_SHIFT; struct resource *rp; int ret; @@ -1132,21 +1134,42 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar, resource_size_t *start, resource_size_t *end) { struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); - unsigned long offset = 0; + resource_size_t offset = 0; if (hose == NULL) return; if (rsrc->flags & IORESOURCE_IO) - offset = ___IO_BASE - hose->io_base_virt + hose->io_base_phys; + offset = (unsigned long)hose->io_base_virt - _IO_BASE; + + /* We pass a fully fixed up address to userland for MMIO instead of + * a BAR value because X is lame and expects to be able to use that + * to pass to /dev/mem ! + * + * That means that we'll have potentially 64 bits values where some + * userland apps only expect 32 (like X itself since it thinks only + * Sparc has 64 bits MMIO) but if we don't do that, we break it on + * 32 bits CHRPs :-( + * + * Hopefully, the sysfs insterface is immune to that gunk. Once X + * has been fixed (and the fix spread enough), we can re-enable the + * 2 lines below and pass down a BAR value to userland. In that case + * we'll also have to re-enable the matching code in + * __pci_mmap_make_offset(). + * + * BenH. + */ +#if 0 + else if (rsrc->flags & IORESOURCE_MEM) + offset = hose->pci_mem_offset; +#endif - *start = rsrc->start + offset; - *end = rsrc->end + offset; + *start = rsrc->start - offset; + *end = rsrc->end - offset; } -void __init -pci_init_resource(struct resource *res, unsigned long start, unsigned long end, - int flags, char *name) +void __init pci_init_resource(struct resource *res, resource_size_t start, + resource_size_t end, int flags, char *name) { res->start = start; res->end = end; |