diff options
Diffstat (limited to 'arch')
106 files changed, 6184 insertions, 625 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1c4119c6004..1ae18d879e1 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -702,6 +702,16 @@ config ARCH_BCMRING help Support for Broadcom's BCMRing platform. +config ARCH_U8500 + bool "ST-Ericsson U8500 Series" + select CPU_V7 + select ARM_AMBA + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select COMMON_CLKDEV + help + Support for ST-Ericsson's Ux500 architecture + endchoice source "arch/arm/mach-clps711x/Kconfig" @@ -787,6 +797,7 @@ source "arch/arm/mach-at91/Kconfig" source "arch/arm/plat-mxc/Kconfig" source "arch/arm/mach-nomadik/Kconfig" +source "arch/arm/plat-nomadik/Kconfig" source "arch/arm/mach-netx/Kconfig" @@ -804,6 +815,8 @@ source "arch/arm/mach-w90x900/Kconfig" source "arch/arm/mach-bcmring/Kconfig" +source "arch/arm/mach-ux500/Kconfig" + # Definitions to make life easier config ARCH_ACORN bool @@ -955,10 +968,10 @@ source "kernel/time/Kconfig" config SMP bool "Symmetric Multi-Processing (EXPERIMENTAL)" depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\ - MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4) + MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500) depends on GENERIC_CLOCKEVENTS select USE_GENERIC_SMP_HELPERS - select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4) + select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500) help This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If @@ -1027,9 +1040,9 @@ config HOTPLUG_CPU config LOCAL_TIMERS bool "Use local timer interrupts" depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \ - REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4) + REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500) default y - select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4) + select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500) help Enable support for local timers on SMP platforms, rather then the legacy IPI broadcast method. Local timers allows the system diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 1a6f70e5292..ff54c23d085 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -83,6 +83,14 @@ config DEBUG_ICEDCC It does include a timeout to ensure that the system does not totally freeze when there is nothing connected to read. +config OC_ETM + bool "On-chip ETM and ETB" + select ARM_AMBA + help + Enables the on-chip embedded trace macrocell and embedded trace + buffer driver that will allow you to collect traces of the + kernel code. + config DEBUG_DC21285_PORT bool "Kernel low-level debugging messages via footbridge serial port" depends on DEBUG_LL && FOOTBRIDGE diff --git a/arch/arm/Makefile b/arch/arm/Makefile index a73caaf6676..7603eba7c0c 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -166,6 +166,7 @@ machine-$(CONFIG_ARCH_SHARK) := shark machine-$(CONFIG_ARCH_STMP378X) := stmp378x machine-$(CONFIG_ARCH_STMP37XX) := stmp37xx machine-$(CONFIG_ARCH_U300) := u300 +machine-$(CONFIG_ARCH_U8500) := ux500 machine-$(CONFIG_ARCH_VERSATILE) := versatile machine-$(CONFIG_ARCH_W90X900) := w90x900 machine-$(CONFIG_FOOTBRIDGE) := footbridge @@ -176,6 +177,7 @@ machine-$(CONFIG_ARCH_MXC91231) := mxc91231 plat-$(CONFIG_ARCH_MXC) := mxc plat-$(CONFIG_ARCH_OMAP) := omap plat-$(CONFIG_PLAT_IOP) := iop +plat-$(CONFIG_PLAT_NOMADIK) := nomadik plat-$(CONFIG_PLAT_ORION) := orion plat-$(CONFIG_PLAT_PXA) := pxa plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 734ac913599..5a375e5fef2 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -342,6 +342,22 @@ dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, } EXPORT_SYMBOL(dma_map_single); +/* + * see if a mapped address was really a "safe" buffer and if so, copy + * the data from the safe buffer back to the unsafe buffer and free up + * the safe buffer. (basically return things back to the way they + * should be) + */ +void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, + enum dma_data_direction dir) +{ + dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n", + __func__, (void *) dma_addr, size, dir); + + unmap_single(dev, dma_addr, size, dir); +} +EXPORT_SYMBOL(dma_unmap_single); + dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset, size_t size, enum dma_data_direction dir) { @@ -366,8 +382,7 @@ EXPORT_SYMBOL(dma_map_page); * the safe buffer. (basically return things back to the way they * should be) */ - -void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, +void dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size, enum dma_data_direction dir) { dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n", @@ -375,7 +390,7 @@ void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, unmap_single(dev, dma_addr, size, dir); } -EXPORT_SYMBOL(dma_unmap_single); +EXPORT_SYMBOL(dma_unmap_page); int dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr, unsigned long off, size_t sz, enum dma_data_direction dir) diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig index 238b218394e..c97e1022ada 100644 --- a/arch/arm/configs/at91rm9200dk_defconfig +++ b/arch/arm/configs/at91rm9200dk_defconfig @@ -120,6 +120,7 @@ CONFIG_ARCH_AT91RM9200DK=y # CONFIG_MACH_CARMEVA is not set # CONFIG_MACH_KB9200 is not set # CONFIG_MACH_ATEB9200 is not set +CONFIG_MACH_ECO920=y # # AT91RM9200 Feature Selections diff --git a/arch/arm/configs/w90p910_defconfig b/arch/arm/configs/nuc910_defconfig index 5245655a0ad..5245655a0ad 100644 --- a/arch/arm/configs/w90p910_defconfig +++ b/arch/arm/configs/nuc910_defconfig diff --git a/arch/arm/configs/nuc950_defconfig b/arch/arm/configs/nuc950_defconfig new file mode 100644 index 00000000000..df1de9b45ca --- /dev/null +++ b/arch/arm/configs/nuc950_defconfig @@ -0,0 +1,922 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-rc7 +# Tue Nov 17 12:31:33 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +CONFIG_USER_NS=y +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +CONFIG_ARCH_W90X900=y +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set +CONFIG_CPU_NUC950=y + +# +# W90P910 Machines +# +# CONFIG_MACH_W90P910EVB is not set + +# +# NUC950 Machines +# +CONFIG_MACH_W90P950EVB=y + +# +# NUC960 Machines +# +# CONFIG_MACH_W90N960EVB is not set + +# +# NUC932 Machines +# +# CONFIG_MACH_NUC932EVB is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_LEGACY=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +CONFIG_BINFMT_AOUT=y +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_MG_DISK is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/nuc960_defconfig b/arch/arm/configs/nuc960_defconfig new file mode 100644 index 00000000000..4b2cd9eae9b --- /dev/null +++ b/arch/arm/configs/nuc960_defconfig @@ -0,0 +1,922 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-rc7 +# Tue Nov 17 12:20:11 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +CONFIG_USER_NS=y +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +CONFIG_ARCH_W90X900=y +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set +CONFIG_CPU_NUC960=y + +# +# W90P910 Machines +# +# CONFIG_MACH_W90P910EVB is not set + +# +# NUC950 Machines +# +# CONFIG_MACH_W90P950EVB is not set + +# +# NUC960 Machines +# +CONFIG_MACH_W90N960EVB=y + +# +# NUC932 Machines +# +# CONFIG_MACH_NUC932EVB is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_LEGACY=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +CONFIG_BINFMT_AOUT=y +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_MG_DISK is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig new file mode 100644 index 00000000000..15fde22ce3f --- /dev/null +++ b/arch/arm/configs/u8500_defconfig @@ -0,0 +1,680 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-rc8 +# Mon Nov 30 11:11:29 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_LOCKBREAK=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_RT_GROUP_SCHED=y +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_USE_GENERIC_SMP_HELPERS=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_STOP_MACHINE=y +CONFIG_BLOCK=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set +CONFIG_ARCH_U8500=y +CONFIG_PLAT_NOMADIK=y +CONFIG_HAS_MTU=y + +# +# ST-Ericsson platform type +# + +# +# ST-Ericsson Multicore Mobile Platforms +# +CONFIG_MACH_U8500_MOP=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +CONFIG_ARM_L1_CACHE_SHIFT=5 +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +CONFIG_ARM_GIC=y +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +CONFIG_ARM_AMBA=y +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_SMP=y +CONFIG_HAVE_ARM_SCU=y +CONFIG_HAVE_ARM_TWD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_NR_CPUS=2 +# CONFIG_HOTPLUG_CPU is not set +CONFIG_LOCAL_TIMERS=y +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +# CONFIG_THUMB2_KERNEL is not set +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_AMBA_PL010 is not set +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_PL022=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=m +# CONFIG_MISC_FILESYSTEMS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=m +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index 3d0cdd21b88..9fd6d3ab68c 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -331,15 +331,15 @@ static inline void outer_flush_range(unsigned long start, unsigned long end) * Convert calls to our calling convention. */ #define flush_cache_all() __cpuc_flush_kern_all() -#ifndef CONFIG_CPU_CACHE_VIPT -static inline void flush_cache_mm(struct mm_struct *mm) + +static inline void vivt_flush_cache_mm(struct mm_struct *mm) { if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) __cpuc_flush_user_all(); } static inline void -flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) +vivt_flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) __cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end), @@ -347,7 +347,7 @@ flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long } static inline void -flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn) +vivt_flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn) { if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) { unsigned long addr = user_addr & PAGE_MASK; @@ -356,7 +356,7 @@ flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned l } static inline void -flush_ptrace_access(struct vm_area_struct *vma, struct page *page, +vivt_flush_ptrace_access(struct vm_area_struct *vma, struct page *page, unsigned long uaddr, void *kaddr, unsigned long len, int write) { @@ -365,6 +365,16 @@ flush_ptrace_access(struct vm_area_struct *vma, struct page *page, __cpuc_coherent_kern_range(addr, addr + len); } } + +#ifndef CONFIG_CPU_CACHE_VIPT +#define flush_cache_mm(mm) \ + vivt_flush_cache_mm(mm) +#define flush_cache_range(vma,start,end) \ + vivt_flush_cache_range(vma,start,end) +#define flush_cache_page(vma,addr,pfn) \ + vivt_flush_cache_page(vma,addr,pfn) +#define flush_ptrace_access(vma,page,ua,ka,len,write) \ + vivt_flush_ptrace_access(vma,page,ua,ka,len,write) #else extern void flush_cache_mm(struct mm_struct *mm); extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); @@ -410,8 +420,6 @@ extern void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, */ extern void flush_dcache_page(struct page *); -extern void __flush_dcache_page(struct address_space *mapping, struct page *page); - static inline void __flush_icache_all(void) { #ifdef CONFIG_ARM_ERRATA_411920 diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index ff46dfa68a9..a96300bf83f 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -15,20 +15,15 @@ * must not be used by drivers. */ #ifndef __arch_page_to_dma - -#if !defined(CONFIG_HIGHMEM) static inline dma_addr_t page_to_dma(struct device *dev, struct page *page) { - return (dma_addr_t)__virt_to_bus((unsigned long)page_address(page)); + return (dma_addr_t)__pfn_to_bus(page_to_pfn(page)); } -#elif defined(__pfn_to_bus) -static inline dma_addr_t page_to_dma(struct device *dev, struct page *page) + +static inline struct page *dma_to_page(struct device *dev, dma_addr_t addr) { - return (dma_addr_t)__pfn_to_bus(page_to_pfn(page)); + return pfn_to_page(__bus_to_pfn(addr)); } -#else -#error "this machine class needs to define __arch_page_to_dma to use HIGHMEM" -#endif static inline void *dma_to_virt(struct device *dev, dma_addr_t addr) { @@ -45,6 +40,11 @@ static inline dma_addr_t page_to_dma(struct device *dev, struct page *page) return __arch_page_to_dma(dev, page); } +static inline struct page *dma_to_page(struct device *dev, dma_addr_t addr) +{ + return __arch_dma_to_page(dev, addr); +} + static inline void *dma_to_virt(struct device *dev, dma_addr_t addr) { return __arch_dma_to_virt(dev, addr); @@ -257,9 +257,11 @@ extern int dma_needs_bounce(struct device*, dma_addr_t, size_t); */ extern dma_addr_t dma_map_single(struct device *, void *, size_t, enum dma_data_direction); +extern void dma_unmap_single(struct device *, dma_addr_t, size_t, + enum dma_data_direction); extern dma_addr_t dma_map_page(struct device *, struct page *, unsigned long, size_t, enum dma_data_direction); -extern void dma_unmap_single(struct device *, dma_addr_t, size_t, +extern void dma_unmap_page(struct device *, dma_addr_t, size_t, enum dma_data_direction); /* @@ -352,7 +354,6 @@ static inline void dma_unmap_single(struct device *dev, dma_addr_t handle, { /* nothing to do */ } -#endif /* CONFIG_DMABOUNCE */ /** * dma_unmap_page - unmap a buffer previously mapped through dma_map_page() @@ -371,8 +372,9 @@ static inline void dma_unmap_single(struct device *dev, dma_addr_t handle, static inline void dma_unmap_page(struct device *dev, dma_addr_t handle, size_t size, enum dma_data_direction dir) { - dma_unmap_single(dev, handle, size, dir); + /* nothing to do */ } +#endif /* CONFIG_DMABOUNCE */ /** * dma_sync_single_range_for_cpu diff --git a/arch/arm/include/asm/hardware/coresight.h b/arch/arm/include/asm/hardware/coresight.h new file mode 100644 index 00000000000..f82b25d4f73 --- /dev/null +++ b/arch/arm/include/asm/hardware/coresight.h @@ -0,0 +1,165 @@ +/* + * linux/arch/arm/include/asm/hardware/coresight.h + * + * CoreSight components' registers + * + * Copyright (C) 2009 Nokia Corporation. + * Alexander Shishkin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_HARDWARE_CORESIGHT_H +#define __ASM_HARDWARE_CORESIGHT_H + +#define TRACER_ACCESSED_BIT 0 +#define TRACER_RUNNING_BIT 1 +#define TRACER_CYCLE_ACC_BIT 2 +#define TRACER_ACCESSED BIT(TRACER_ACCESSED_BIT) +#define TRACER_RUNNING BIT(TRACER_RUNNING_BIT) +#define TRACER_CYCLE_ACC BIT(TRACER_CYCLE_ACC_BIT) + +struct tracectx { + unsigned int etb_bufsz; + void __iomem *etb_regs; + void __iomem *etm_regs; + unsigned long flags; + int ncmppairs; + int etm_portsz; + struct device *dev; + struct clk *emu_clk; + struct mutex mutex; +}; + +#define TRACER_TIMEOUT 10000 + +#define etm_writel(t, v, x) \ + (__raw_writel((v), (t)->etm_regs + (x))) +#define etm_readl(t, x) (__raw_readl((t)->etm_regs + (x))) + +/* CoreSight Management Registers */ +#define CSMR_LOCKACCESS 0xfb0 +#define CSMR_LOCKSTATUS 0xfb4 +#define CSMR_AUTHSTATUS 0xfb8 +#define CSMR_DEVID 0xfc8 +#define CSMR_DEVTYPE 0xfcc +/* CoreSight Component Registers */ +#define CSCR_CLASS 0xff4 + +#define CSCR_PRSR 0x314 + +#define UNLOCK_MAGIC 0xc5acce55 + +/* ETM control register, "ETM Architecture", 3.3.1 */ +#define ETMR_CTRL 0 +#define ETMCTRL_POWERDOWN 1 +#define ETMCTRL_PROGRAM (1 << 10) +#define ETMCTRL_PORTSEL (1 << 11) +#define ETMCTRL_DO_CONTEXTID (3 << 14) +#define ETMCTRL_PORTMASK1 (7 << 4) +#define ETMCTRL_PORTMASK2 (1 << 21) +#define ETMCTRL_PORTMASK (ETMCTRL_PORTMASK1 | ETMCTRL_PORTMASK2) +#define ETMCTRL_PORTSIZE(x) ((((x) & 7) << 4) | (!!((x) & 8)) << 21) +#define ETMCTRL_DO_CPRT (1 << 1) +#define ETMCTRL_DATAMASK (3 << 2) +#define ETMCTRL_DATA_DO_DATA (1 << 2) +#define ETMCTRL_DATA_DO_ADDR (1 << 3) +#define ETMCTRL_DATA_DO_BOTH (ETMCTRL_DATA_DO_DATA | ETMCTRL_DATA_DO_ADDR) +#define ETMCTRL_BRANCH_OUTPUT (1 << 8) +#define ETMCTRL_CYCLEACCURATE (1 << 12) + +/* ETM configuration code register */ +#define ETMR_CONFCODE (0x04) + +/* ETM trace start/stop resource control register */ +#define ETMR_TRACESSCTRL (0x18) + +/* ETM trigger event register */ +#define ETMR_TRIGEVT (0x08) + +/* address access type register bits, "ETM architecture", + * table 3-27 */ +/* - access type */ +#define ETMAAT_IFETCH 0 +#define ETMAAT_IEXEC 1 +#define ETMAAT_IEXECPASS 2 +#define ETMAAT_IEXECFAIL 3 +#define ETMAAT_DLOADSTORE 4 +#define ETMAAT_DLOAD 5 +#define ETMAAT_DSTORE 6 +/* - comparison access size */ +#define ETMAAT_JAVA (0 << 3) +#define ETMAAT_THUMB (1 << 3) +#define ETMAAT_ARM (3 << 3) +/* - data value comparison control */ +#define ETMAAT_NOVALCMP (0 << 5) +#define ETMAAT_VALMATCH (1 << 5) +#define ETMAAT_VALNOMATCH (3 << 5) +/* - exact match */ +#define ETMAAT_EXACTMATCH (1 << 7) +/* - context id comparator control */ +#define ETMAAT_IGNCONTEXTID (0 << 8) +#define ETMAAT_VALUE1 (1 << 8) +#define ETMAAT_VALUE2 (2 << 8) +#define ETMAAT_VALUE3 (3 << 8) +/* - security level control */ +#define ETMAAT_IGNSECURITY (0 << 10) +#define ETMAAT_NSONLY (1 << 10) +#define ETMAAT_SONLY (2 << 10) + +#define ETMR_COMP_VAL(x) (0x40 + (x) * 4) +#define ETMR_COMP_ACC_TYPE(x) (0x80 + (x) * 4) + +/* ETM status register, "ETM Architecture", 3.3.2 */ +#define ETMR_STATUS (0x10) +#define ETMST_OVERFLOW (1 << 0) +#define ETMST_PROGBIT (1 << 1) +#define ETMST_STARTSTOP (1 << 2) +#define ETMST_TRIGGER (1 << 3) + +#define etm_progbit(t) (etm_readl((t), ETMR_STATUS) & ETMST_PROGBIT) +#define etm_started(t) (etm_readl((t), ETMR_STATUS) & ETMST_STARTSTOP) +#define etm_triggered(t) (etm_readl((t), ETMR_STATUS) & ETMST_TRIGGER) + +#define ETMR_TRACEENCTRL2 0x1c +#define ETMR_TRACEENCTRL 0x24 +#define ETMTE_INCLEXCL (1 << 24) +#define ETMR_TRACEENEVT 0x20 +#define ETMCTRL_OPTS (ETMCTRL_DO_CPRT | \ + ETMCTRL_DATA_DO_ADDR | \ + ETMCTRL_BRANCH_OUTPUT | \ + ETMCTRL_DO_CONTEXTID) + +/* ETB registers, "CoreSight Components TRM", 9.3 */ +#define ETBR_DEPTH 0x04 +#define ETBR_STATUS 0x0c +#define ETBR_READMEM 0x10 +#define ETBR_READADDR 0x14 +#define ETBR_WRITEADDR 0x18 +#define ETBR_TRIGGERCOUNT 0x1c +#define ETBR_CTRL 0x20 +#define ETBR_FORMATTERCTRL 0x304 +#define ETBFF_ENFTC 1 +#define ETBFF_ENFCONT (1 << 1) +#define ETBFF_FONFLIN (1 << 4) +#define ETBFF_MANUAL_FLUSH (1 << 6) +#define ETBFF_TRIGIN (1 << 8) +#define ETBFF_TRIGEVT (1 << 9) +#define ETBFF_TRIGFL (1 << 10) + +#define etb_writel(t, v, x) \ + (__raw_writel((v), (t)->etb_regs + (x))) +#define etb_readl(t, x) (__raw_readl((t)->etb_regs + (x))) + +#define etm_lock(t) do { etm_writel((t), 0, CSMR_LOCKACCESS); } while (0) +#define etm_unlock(t) \ + do { etm_writel((t), UNLOCK_MAGIC, CSMR_LOCKACCESS); } while (0) + +#define etb_lock(t) do { etb_writel((t), 0, CSMR_LOCKACCESS); } while (0) +#define etb_unlock(t) \ + do { etb_writel((t), UNLOCK_MAGIC, CSMR_LOCKACCESS); } while (0) + +#endif /* __ASM_HARDWARE_CORESIGHT_H */ + diff --git a/arch/arm/include/asm/kmap_types.h b/arch/arm/include/asm/kmap_types.h index d16ec97ec9a..c019949a518 100644 --- a/arch/arm/include/asm/kmap_types.h +++ b/arch/arm/include/asm/kmap_types.h @@ -22,4 +22,10 @@ enum km_type { KM_TYPE_NR }; +#ifdef CONFIG_DEBUG_HIGHMEM +#define KM_NMI (-1) +#define KM_NMI_PTE (-1) +#define KM_IRQ_PTE (-1) +#endif + #endif diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index cefedf06213..5421d82a257 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -125,8 +125,10 @@ * private definitions which should NOT be used outside memory.h * files. Use virt_to_phys/phys_to_virt/__pa/__va instead. */ +#ifndef __virt_to_phys #define __virt_to_phys(x) ((x) - PAGE_OFFSET + PHYS_OFFSET) #define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET) +#endif /* * Convert a physical address to a Page Frame Number and back @@ -134,6 +136,12 @@ #define __phys_to_pfn(paddr) ((paddr) >> PAGE_SHIFT) #define __pfn_to_phys(pfn) ((pfn) << PAGE_SHIFT) +/* + * Convert a page to/from a physical address + */ +#define page_to_phys(page) (__pfn_to_phys(page_to_pfn(page))) +#define phys_to_page(phys) (pfn_to_page(__phys_to_pfn(phys))) + #ifndef __ASSEMBLY__ /* @@ -194,7 +202,8 @@ static inline void *phys_to_virt(unsigned long x) #ifndef __virt_to_bus #define __virt_to_bus __virt_to_phys #define __bus_to_virt __phys_to_virt -#define __pfn_to_bus(x) ((x) << PAGE_SHIFT) +#define __pfn_to_bus(x) __pfn_to_phys(x) +#define __bus_to_pfn(x) __phys_to_pfn(x) #endif static inline __deprecated unsigned long virt_to_bus(void *x) @@ -293,11 +302,6 @@ static inline __deprecated void *bus_to_virt(unsigned long x) #endif /* !CONFIG_DISCONTIGMEM */ /* - * For BIO. "will die". Kill me when bio_to_phys() and bvec_to_phys() die. - */ -#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) - -/* * Optional coherency support. Currently used only by selected * Intel XSC3-based systems. */ diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 201ccaa11f6..11397687f42 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -304,13 +304,23 @@ PTE_BIT_FUNC(mkyoung, |= L_PTE_YOUNG); static inline pte_t pte_mkspecial(pte_t pte) { return pte; } +#define __pgprot_modify(prot,mask,bits) \ + __pgprot((pgprot_val(prot) & ~(mask)) | (bits)) + /* * Mark the prot value as uncacheable and unbufferable. */ #define pgprot_noncached(prot) \ - __pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_UNCACHED) + __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED) #define pgprot_writecombine(prot) \ - __pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_BUFFERABLE) + __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE) +#if __LINUX_ARM_ARCH__ >= 7 +#define pgprot_dmacoherent(prot) \ + __pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_BUFFERABLE) +#else +#define pgprot_dmacoherent(prot) \ + __pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_UNCACHED) +#endif #define pmd_none(pmd) (!pmd_val(pmd)) #define pmd_present(pmd) (pmd_val(pmd)) diff --git a/arch/arm/include/asm/swab.h b/arch/arm/include/asm/swab.h index ca2bf2f6d6e..9997ad20eff 100644 --- a/arch/arm/include/asm/swab.h +++ b/arch/arm/include/asm/swab.h @@ -22,6 +22,24 @@ # define __SWAB_64_THRU_32__ #endif +#if defined(__KERNEL__) && __LINUX_ARM_ARCH__ >= 6 + +static inline __attribute_const__ __u16 __arch_swab16(__u16 x) +{ + __asm__ ("rev16 %0, %1" : "=r" (x) : "r" (x)); + return x; +} +#define __arch_swab16 __arch_swab16 + +static inline __attribute_const__ __u32 __arch_swab32(__u32 x) +{ + __asm__ ("rev %0, %1" : "=r" (x) : "r" (x)); + return x; +} +#define __arch_swab32 __arch_swab32 + +#else + static inline __attribute_const__ __u32 __arch_swab32(__u32 x) { __u32 t; @@ -48,3 +66,4 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x) #endif +#endif diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index d65b2f5bf41..058e7e90881 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -138,21 +138,26 @@ extern unsigned int user_debug; #define dmb() __asm__ __volatile__ ("" : : : "memory") #endif -#ifndef CONFIG_SMP +#if __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP) +#define mb() dmb() +#define rmb() dmb() +#define wmb() dmb() +#else #define mb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) #define rmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) #define wmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) +#endif + +#ifndef CONFIG_SMP #define smp_mb() barrier() #define smp_rmb() barrier() #define smp_wmb() barrier() #else -#define mb() dmb() -#define rmb() dmb() -#define wmb() dmb() -#define smp_mb() dmb() -#define smp_rmb() dmb() -#define smp_wmb() dmb() +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() #endif + #define read_barrier_depends() do { } while(0) #define smp_read_barrier_depends() do { } while(0) diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 79087dd6d86..e7ccf7e697c 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -17,6 +17,8 @@ obj-y := compat.o elf.o entry-armv.o entry-common.o irq.o \ process.o ptrace.o return_address.o setup.o signal.o \ sys_arm.o stacktrace.o time.o traps.o +obj-$(CONFIG_OC_ETM) += etm.o + obj-$(CONFIG_ISA_DMA_API) += dma.o obj-$(CONFIG_ARCH_ACORN) += ecard.o obj-$(CONFIG_FIQ) += fiq.o diff --git a/arch/arm/kernel/etm.c b/arch/arm/kernel/etm.c new file mode 100644 index 00000000000..82775396630 --- /dev/null +++ b/arch/arm/kernel/etm.c @@ -0,0 +1,641 @@ +/* + * linux/arch/arm/kernel/etm.c + * + * Driver for ARM's Embedded Trace Macrocell and Embedded Trace Buffer. + * + * Copyright (C) 2009 Nokia Corporation. + * Alexander Shishkin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/io.h> +#include <linux/sysrq.h> +#include <linux/device.h> +#include <linux/clk.h> +#include <linux/amba/bus.h> +#include <linux/fs.h> +#include <linux/uaccess.h> +#include <linux/miscdevice.h> +#include <linux/vmalloc.h> +#include <linux/mutex.h> +#include <asm/hardware/coresight.h> +#include <asm/sections.h> + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Alexander Shishkin"); + +static struct tracectx tracer; + +static inline bool trace_isrunning(struct tracectx *t) +{ + return !!(t->flags & TRACER_RUNNING); +} + +static int etm_setup_address_range(struct tracectx *t, int n, + unsigned long start, unsigned long end, int exclude, int data) +{ + u32 flags = ETMAAT_ARM | ETMAAT_IGNCONTEXTID | ETMAAT_NSONLY | \ + ETMAAT_NOVALCMP; + + if (n < 1 || n > t->ncmppairs) + return -EINVAL; + + /* comparators and ranges are numbered starting with 1 as opposed + * to bits in a word */ + n--; + + if (data) + flags |= ETMAAT_DLOADSTORE; + else + flags |= ETMAAT_IEXEC; + + /* first comparator for the range */ + etm_writel(t, flags, ETMR_COMP_ACC_TYPE(n * 2)); + etm_writel(t, start, ETMR_COMP_VAL(n * 2)); + + /* second comparator is right next to it */ + etm_writel(t, flags, ETMR_COMP_ACC_TYPE(n * 2 + 1)); + etm_writel(t, end, ETMR_COMP_VAL(n * 2 + 1)); + + flags = exclude ? ETMTE_INCLEXCL : 0; + etm_writel(t, flags | (1 << n), ETMR_TRACEENCTRL); + + return 0; +} + +static int trace_start(struct tracectx *t) +{ + u32 v; + unsigned long timeout = TRACER_TIMEOUT; + + etb_unlock(t); + + etb_writel(t, 0, ETBR_FORMATTERCTRL); + etb_writel(t, 1, ETBR_CTRL); + + etb_lock(t); + + /* configure etm */ + v = ETMCTRL_OPTS | ETMCTRL_PROGRAM | ETMCTRL_PORTSIZE(t->etm_portsz); + + if (t->flags & TRACER_CYCLE_ACC) + v |= ETMCTRL_CYCLEACCURATE; + + etm_unlock(t); + + etm_writel(t, v, ETMR_CTRL); + + while (!(etm_readl(t, ETMR_CTRL) & ETMCTRL_PROGRAM) && --timeout) + ; + if (!timeout) { + dev_dbg(t->dev, "Waiting for progbit to assert timed out\n"); + etm_lock(t); + return -EFAULT; + } + + etm_setup_address_range(t, 1, (unsigned long)_stext, + (unsigned long)_etext, 0, 0); + etm_writel(t, 0, ETMR_TRACEENCTRL2); + etm_writel(t, 0, ETMR_TRACESSCTRL); + etm_writel(t, 0x6f, ETMR_TRACEENEVT); + + v &= ~ETMCTRL_PROGRAM; + v |= ETMCTRL_PORTSEL; + + etm_writel(t, v, ETMR_CTRL); + + timeout = TRACER_TIMEOUT; + while (etm_readl(t, ETMR_CTRL) & ETMCTRL_PROGRAM && --timeout) + ; + if (!timeout) { + dev_dbg(t->dev, "Waiting for progbit to deassert timed out\n"); + etm_lock(t); + return -EFAULT; + } + + etm_lock(t); + + t->flags |= TRACER_RUNNING; + + return 0; +} + +static int trace_stop(struct tracectx *t) +{ + unsigned long timeout = TRACER_TIMEOUT; + + etm_unlock(t); + + etm_writel(t, 0x440, ETMR_CTRL); + while (!(etm_readl(t, ETMR_CTRL) & ETMCTRL_PROGRAM) && --timeout) + ; + if (!timeout) { + dev_dbg(t->dev, "Waiting for progbit to assert timed out\n"); + etm_lock(t); + return -EFAULT; + } + + etm_lock(t); + + etb_unlock(t); + etb_writel(t, ETBFF_MANUAL_FLUSH, ETBR_FORMATTERCTRL); + + timeout = TRACER_TIMEOUT; + while (etb_readl(t, ETBR_FORMATTERCTRL) & + ETBFF_MANUAL_FLUSH && --timeout) + ; + if (!timeout) { + dev_dbg(t->dev, "Waiting for formatter flush to commence " + "timed out\n"); + etb_lock(t); + return -EFAULT; + } + + etb_writel(t, 0, ETBR_CTRL); + + etb_lock(t); + + t->flags &= ~TRACER_RUNNING; + + return 0; +} + +static int etb_getdatalen(struct tracectx *t) +{ + u32 v; + int rp, wp; + + v = etb_readl(t, ETBR_STATUS); + + if (v & 1) + return t->etb_bufsz; + + rp = etb_readl(t, ETBR_READADDR); + wp = etb_readl(t, ETBR_WRITEADDR); + + if (rp > wp) { + etb_writel(t, 0, ETBR_READADDR); + etb_writel(t, 0, ETBR_WRITEADDR); + + return 0; + } + + return wp - rp; +} + +/* sysrq+v will always stop the running trace and leave it at that */ +static void etm_dump(void) +{ + struct tracectx *t = &tracer; + u32 first = 0; + int length; + + if (!t->etb_regs) { + printk(KERN_INFO "No tracing hardware found\n"); + return; + } + + if (trace_isrunning(t)) + trace_stop(t); + + etb_unlock(t); + + length = etb_getdatalen(t); + + if (length == t->etb_bufsz) + first = etb_readl(t, ETBR_WRITEADDR); + + etb_writel(t, first, ETBR_READADDR); + + printk(KERN_INFO "Trace buffer contents length: %d\n", length); + printk(KERN_INFO "--- ETB buffer begin ---\n"); + for (; length; length--) + printk("%08x", cpu_to_be32(etb_readl(t, ETBR_READMEM))); + printk(KERN_INFO "\n--- ETB buffer end ---\n"); + + /* deassert the overflow bit */ + etb_writel(t, 1, ETBR_CTRL); + etb_writel(t, 0, ETBR_CTRL); + + etb_writel(t, 0, ETBR_TRIGGERCOUNT); + etb_writel(t, 0, ETBR_READADDR); + etb_writel(t, 0, ETBR_WRITEADDR); + + etb_lock(t); +} + +static void sysrq_etm_dump(int key, struct tty_struct *tty) +{ + dev_dbg(tracer.dev, "Dumping ETB buffer\n"); + etm_dump(); +} + +static struct sysrq_key_op sysrq_etm_op = { + .handler = sysrq_etm_dump, + .help_msg = "ETM buffer dump", + .action_msg = "etm", +}; + +static int etb_open(struct inode *inode, struct file *file) +{ + if (!tracer.etb_regs) + return -ENODEV; + + file->private_data = &tracer; + + return nonseekable_open(inode, file); +} + +static ssize_t etb_read(struct file *file, char __user *data, + size_t len, loff_t *ppos) +{ + int total, i; + long length; + struct tracectx *t = file->private_data; + u32 first = 0; + u32 *buf; + + mutex_lock(&t->mutex); + + if (trace_isrunning(t)) { + length = 0; + goto out; + } + + etb_unlock(t); + + total = etb_getdatalen(t); + if (total == t->etb_bufsz) + first = etb_readl(t, ETBR_WRITEADDR); + + etb_writel(t, first, ETBR_READADDR); + + length = min(total * 4, (int)len); + buf = vmalloc(length); + + dev_dbg(t->dev, "ETB buffer length: %d\n", total); + dev_dbg(t->dev, "ETB status reg: %x\n", etb_readl(t, ETBR_STATUS)); + for (i = 0; i < length / 4; i++) + buf[i] = etb_readl(t, ETBR_READMEM); + + /* the only way to deassert overflow bit in ETB status is this */ + etb_writel(t, 1, ETBR_CTRL); + etb_writel(t, 0, ETBR_CTRL); + + etb_writel(t, 0, ETBR_WRITEADDR); + etb_writel(t, 0, ETBR_READADDR); + etb_writel(t, 0, ETBR_TRIGGERCOUNT); + + etb_lock(t); + + length -= copy_to_user(data, buf, length); + vfree(buf); + +out: + mutex_unlock(&t->mutex); + + return length; +} + +static int etb_release(struct inode *inode, struct file *file) +{ + /* there's nothing to do here, actually */ + return 0; +} + +static const struct file_operations etb_fops = { + .owner = THIS_MODULE, + .read = etb_read, + .open = etb_open, + .release = etb_release, +}; + +static struct miscdevice etb_miscdev = { + .name = "tracebuf", + .minor = 0, + .fops = &etb_fops, +}; + +static int __init etb_probe(struct amba_device *dev, struct amba_id *id) +{ + struct tracectx *t = &tracer; + int ret = 0; + + ret = amba_request_regions(dev, NULL); + if (ret) + goto out; + + t->etb_regs = ioremap_nocache(dev->res.start, resource_size(&dev->res)); + if (!t->etb_regs) { + ret = -ENOMEM; + goto out_release; + } + + amba_set_drvdata(dev, t); + + etb_miscdev.parent = &dev->dev; + + ret = misc_register(&etb_miscdev); + if (ret) + goto out_unmap; + + t->emu_clk = clk_get(&dev->dev, "emu_src_ck"); + if (IS_ERR(t->emu_clk)) { + dev_dbg(&dev->dev, "Failed to obtain emu_src_ck.\n"); + return -EFAULT; + } + + clk_enable(t->emu_clk); + + etb_unlock(t); + t->etb_bufsz = etb_readl(t, ETBR_DEPTH); + dev_dbg(&dev->dev, "Size: %x\n", t->etb_bufsz); + + /* make sure trace capture is disabled */ + etb_writel(t, 0, ETBR_CTRL); + etb_writel(t, 0x1000, ETBR_FORMATTERCTRL); + etb_lock(t); + + dev_dbg(&dev->dev, "ETB AMBA driver initialized.\n"); + +out: + return ret; + +out_unmap: + amba_set_drvdata(dev, NULL); + iounmap(t->etb_regs); + +out_release: + amba_release_regions(dev); + + return ret; +} + +static int etb_remove(struct amba_device *dev) +{ + struct tracectx *t = amba_get_drvdata(dev); + + amba_set_drvdata(dev, NULL); + + iounmap(t->etb_regs); + t->etb_regs = NULL; + + clk_disable(t->emu_clk); + clk_put(t->emu_clk); + + amba_release_regions(dev); + + return 0; +} + +static struct amba_id etb_ids[] = { + { + .id = 0x0003b907, + .mask = 0x0007ffff, + }, + { 0, 0 }, +}; + +static struct amba_driver etb_driver = { + .drv = { + .name = "etb", + .owner = THIS_MODULE, + }, + .probe = etb_probe, + .remove = etb_remove, + .id_table = etb_ids, +}; + +/* use a sysfs file "trace_running" to start/stop tracing */ +static ssize_t trace_running_show(struct kobject *kobj, + struct kobj_attribute *attr, + char *buf) +{ + return sprintf(buf, "%x\n", trace_isrunning(&tracer)); +} + +static ssize_t trace_running_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t n) +{ + unsigned int value; + int ret; + + if (sscanf(buf, "%u", &value) != 1) + return -EINVAL; + + mutex_lock(&tracer.mutex); + ret = value ? trace_start(&tracer) : trace_stop(&tracer); + mutex_unlock(&tracer.mutex); + + return ret ? : n; +} + +static struct kobj_attribute trace_running_attr = + __ATTR(trace_running, 0644, trace_running_show, trace_running_store); + +static ssize_t trace_info_show(struct kobject *kobj, + struct kobj_attribute *attr, + char *buf) +{ + u32 etb_wa, etb_ra, etb_st, etb_fc, etm_ctrl, etm_st; + int datalen; + + etb_unlock(&tracer); + datalen = etb_getdatalen(&tracer); + etb_wa = etb_readl(&tracer, ETBR_WRITEADDR); + etb_ra = etb_readl(&tracer, ETBR_READADDR); + etb_st = etb_readl(&tracer, ETBR_STATUS); + etb_fc = etb_readl(&tracer, ETBR_FORMATTERCTRL); + etb_lock(&tracer); + + etm_unlock(&tracer); + etm_ctrl = etm_readl(&tracer, ETMR_CTRL); + etm_st = etm_readl(&tracer, ETMR_STATUS); + etm_lock(&tracer); + + return sprintf(buf, "Trace buffer len: %d\nComparator pairs: %d\n" + "ETBR_WRITEADDR:\t%08x\n" + "ETBR_READADDR:\t%08x\n" + "ETBR_STATUS:\t%08x\n" + "ETBR_FORMATTERCTRL:\t%08x\n" + "ETMR_CTRL:\t%08x\n" + "ETMR_STATUS:\t%08x\n", + datalen, + tracer.ncmppairs, + etb_wa, + etb_ra, + etb_st, + etb_fc, + etm_ctrl, + etm_st + ); +} + +static struct kobj_attribute trace_info_attr = + __ATTR(trace_info, 0444, trace_info_show, NULL); + +static ssize_t trace_mode_show(struct kobject *kobj, + struct kobj_attribute *attr, + char *buf) +{ + return sprintf(buf, "%d %d\n", + !!(tracer.flags & TRACER_CYCLE_ACC), + tracer.etm_portsz); +} + +static ssize_t trace_mode_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t n) +{ + unsigned int cycacc, portsz; + + if (sscanf(buf, "%u %u", &cycacc, &portsz) != 2) + return -EINVAL; + + mutex_lock(&tracer.mutex); + if (cycacc) + tracer.flags |= TRACER_CYCLE_ACC; + else + tracer.flags &= ~TRACER_CYCLE_ACC; + + tracer.etm_portsz = portsz & 0x0f; + mutex_unlock(&tracer.mutex); + + return n; +} + +static struct kobj_attribute trace_mode_attr = + __ATTR(trace_mode, 0644, trace_mode_show, trace_mode_store); + +static int __init etm_probe(struct amba_device *dev, struct amba_id *id) +{ + struct tracectx *t = &tracer; + int ret = 0; + + if (t->etm_regs) { + dev_dbg(&dev->dev, "ETM already initialized\n"); + ret = -EBUSY; + goto out; + } + + ret = amba_request_regions(dev, NULL); + if (ret) + goto out; + + t->etm_regs = ioremap_nocache(dev->res.start, resource_size(&dev->res)); + if (!t->etm_regs) { + ret = -ENOMEM; + goto out_release; + } + + amba_set_drvdata(dev, t); + + mutex_init(&t->mutex); + t->dev = &dev->dev; + t->flags = TRACER_CYCLE_ACC; + t->etm_portsz = 1; + + etm_unlock(t); + ret = etm_readl(t, CSCR_PRSR); + + t->ncmppairs = etm_readl(t, ETMR_CONFCODE) & 0xf; + etm_writel(t, 0x440, ETMR_CTRL); + etm_lock(t); + + ret = sysfs_create_file(&dev->dev.kobj, + &trace_running_attr.attr); + if (ret) + goto out_unmap; + + /* failing to create any of these two is not fatal */ + ret = sysfs_create_file(&dev->dev.kobj, &trace_info_attr.attr); + if (ret) + dev_dbg(&dev->dev, "Failed to create trace_info in sysfs\n"); + + ret = sysfs_create_file(&dev->dev.kobj, &trace_mode_attr.attr); + if (ret) + dev_dbg(&dev->dev, "Failed to create trace_mode in sysfs\n"); + + dev_dbg(t->dev, "ETM AMBA driver initialized.\n"); + +out: + return ret; + +out_unmap: + amba_set_drvdata(dev, NULL); + iounmap(t->etm_regs); + +out_release: + amba_release_regions(dev); + + return ret; +} + +static int etm_remove(struct amba_device *dev) +{ + struct tracectx *t = amba_get_drvdata(dev); + + amba_set_drvdata(dev, NULL); + + iounmap(t->etm_regs); + t->etm_regs = NULL; + + amba_release_regions(dev); + + sysfs_remove_file(&dev->dev.kobj, &trace_running_attr.attr); + sysfs_remove_file(&dev->dev.kobj, &trace_info_attr.attr); + sysfs_remove_file(&dev->dev.kobj, &trace_mode_attr.attr); + + return 0; +} + +static struct amba_id etm_ids[] = { + { + .id = 0x0003b921, + .mask = 0x0007ffff, + }, + { 0, 0 }, +}; + +static struct amba_driver etm_driver = { + .drv = { + .name = "etm", + .owner = THIS_MODULE, + }, + .probe = etm_probe, + .remove = etm_remove, + .id_table = etm_ids, +}; + +static int __init etm_init(void) +{ + int retval; + + retval = amba_driver_register(&etb_driver); + if (retval) { + printk(KERN_ERR "Failed to register etb\n"); + return retval; + } + + retval = amba_driver_register(&etm_driver); + if (retval) { + amba_driver_unregister(&etb_driver); + printk(KERN_ERR "Failed to probe etm\n"); + return retval; + } + + /* not being able to install this handler is not fatal */ + (void)register_sysrq_key('v', &sysrq_etm_op); + + return 0; +} + +device_initcall(etm_init); + diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 2a573d4fea2..e7714f367eb 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -662,8 +662,12 @@ static void do_signal(struct pt_regs *regs, int syscall) regs->ARM_sp -= 4; usp = (u32 __user *)regs->ARM_sp; - put_user(regs->ARM_pc, usp); - regs->ARM_pc = KERN_RESTART_CODE; + if (put_user(regs->ARM_pc, usp) == 0) { + regs->ARM_pc = KERN_RESTART_CODE; + } else { + regs->ARM_sp += 4; + force_sigsegv(0, current); + } #endif } } diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 2fd88437348..c71e39ed092 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -163,6 +163,11 @@ config MACH_CPUAT91 Select this if you are using the Eukrea Electromatique's CPUAT91 board <http://www.eukrea.com/>. +config MACH_ECO920 + bool "eco920" + help + Select this if you are using the eco920 board + endif # ---------------------------------------------------------- diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index ada440aab0c..709fbad4a3e 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o obj-$(CONFIG_MACH_YL9200) += board-yl-9200.o obj-$(CONFIG_MACH_CPUAT91) += board-cpuat91.o +obj-$(CONFIG_MACH_ECO920) += board-eco920.o # AT91SAM9260 board-specific support obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o @@ -77,6 +78,7 @@ obj-y += leds.o # Power Management obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o +obj-$(CONFIG_CPU_IDLE) += cpuidle.o ifeq ($(CONFIG_PM_DEBUG),y) CFLAGS_pm.o += -DDEBUG diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 332b784050b..a57af3e99c7 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -131,6 +131,62 @@ void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {} /* -------------------------------------------------------------------- + * USB Host HS (EHCI) + * Needs an OHCI host for low and full speed management + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE) +static u64 ehci_dmamask = DMA_BIT_MASK(32); +static struct at91_usbh_data usbh_ehci_data; + +static struct resource usbh_ehci_resources[] = { + [0] = { + .start = AT91SAM9G45_EHCI_BASE, + .end = AT91SAM9G45_EHCI_BASE + SZ_1M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_UHPHS, + .end = AT91SAM9G45_ID_UHPHS, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91_usbh_ehci_device = { + .name = "atmel-ehci", + .id = -1, + .dev = { + .dma_mask = &ehci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &usbh_ehci_data, + }, + .resource = usbh_ehci_resources, + .num_resources = ARRAY_SIZE(usbh_ehci_resources), +}; + +void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) +{ + int i; + + if (!data) + return; + + /* Enable VBus control for UHP ports */ + for (i = 0; i < data->ports; i++) { + if (data->vbus_pin[i]) + at91_set_gpio_output(data->vbus_pin[i], 0); + } + + usbh_ehci_data = *data; + at91_clock_associate("uhphs_clk", &at91_usbh_ehci_device.dev, "ehci_clk"); + platform_device_register(&at91_usbh_ehci_device); +} +#else +void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) {} +#endif + + +/* -------------------------------------------------------------------- * USB HS Device (Gadget) * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c new file mode 100644 index 00000000000..295a96609e7 --- /dev/null +++ b/arch/arm/mach-at91/board-eco920.c @@ -0,0 +1,158 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/board.h> +#include <mach/at91rm9200_mc.h> +#include "generic.h" + +static void __init eco920_map_io(void) +{ + at91rm9200_initialize(18432000, AT91RM9200_PQFP); + + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); + + /* DBGU on ttyS0. (Rx & Tx only */ + at91_register_uart(0, 0, 0); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); +} + +static void __init eco920_init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + +static struct at91_eth_data __initdata eco920_eth_data = { + .phy_irq_pin = AT91_PIN_PC2, + .is_rmii = 1, +}; + +static struct at91_usbh_data __initdata eco920_usbh_data = { + .ports = 1, +}; + +static struct at91_udc_data __initdata eco920_udc_data = { + .vbus_pin = AT91_PIN_PB12, + .pullup_pin = AT91_PIN_PB13, +}; + +static struct at91_mmc_data __initdata eco920_mmc_data = { + .slot_b = 0, + .wire4 = 0, +}; + +static struct physmap_flash_data eco920_flash_data = { + .width = 2, +}; + +static struct resource eco920_flash_resource = { + .start = 0x11000000, + .end = 0x11ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device eco920_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &eco920_flash_data, + }, + .resource = &eco920_flash_resource, + .num_resources = 1, +}; + +static struct resource at91_beeper_resources[] = { + [0] = { + .start = AT91RM9200_BASE_TC3, + .end = AT91RM9200_BASE_TC3 + 0x39, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device at91_beeper = { + .name = "at91_beeper", + .id = 0, + .resource = at91_beeper_resources, + .num_resources = ARRAY_SIZE(at91_beeper_resources), +}; + +static struct spi_board_info eco920_spi_devices[] = { + { /* CAN controller */ + .modalias = "tlv5638", + .chip_select = 3, + .max_speed_hz = 20 * 1000 * 1000, + .mode = SPI_CPHA, + }, +}; + +static void __init eco920_board_init(void) +{ + at91_add_device_serial(); + at91_add_device_eth(&eco920_eth_data); + at91_add_device_usbh(&eco920_usbh_data); + at91_add_device_udc(&eco920_udc_data); + + at91_add_device_mmc(0, &eco920_mmc_data); + platform_device_register(&eco920_flash); + + at91_sys_write(AT91_SMC_CSR(7), AT91_SMC_RWHOLD_(1) + | AT91_SMC_RWSETUP_(1) + | AT91_SMC_DBW_8 + | AT91_SMC_WSEN + | AT91_SMC_NWS_(15)); + + at91_set_A_periph(AT91_PIN_PC6, 1); + + at91_set_gpio_input(AT91_PIN_PA23, 0); + at91_set_deglitch(AT91_PIN_PA23, 1); + +/* Initialization of the Static Memory Controller for Chip Select 3 */ + at91_sys_write(AT91_SMC_CSR(3), + AT91_SMC_DBW_16 | /* 16 bit */ + AT91_SMC_WSEN | + AT91_SMC_NWS_(5) | /* wait states */ + AT91_SMC_TDF_(1) /* float time */ + ); + + at91_clock_associate("tc3_clk", &at91_beeper.dev, "at91_beeper"); + at91_set_B_periph(AT91_PIN_PB6, 0); + platform_device_register(&at91_beeper); + + at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices)); +} + +MACHINE_START(ECO920, "eco920") + /* Maintainer: Sascha Hauer */ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91rm9200_timer, + .map_io = eco920_map_io, + .init_irq = eco920_init_irq, + .init_machine = eco920_board_init, +MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 64c3843f323..1cf4d868107 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -366,6 +366,7 @@ static void __init ek_board_init(void) at91_add_device_serial(); /* USB HS Host */ at91_add_device_usbh_ohci(&ek_usbh_hs_data); + at91_add_device_usbh_ehci(&ek_usbh_hs_data); /* USB HS Device */ at91_add_device_usba(&ek_usba_udc_data); /* SPI */ diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c new file mode 100644 index 00000000000..1cfeac1483d --- /dev/null +++ b/arch/arm/mach-at91/cpuidle.c @@ -0,0 +1,94 @@ +/* + * based on arch/arm/mach-kirkwood/cpuidle.c + * + * CPU idle support for AT91 SoC + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * The cpu idle uses wait-for-interrupt and RAM self refresh in order + * to implement two idle states - + * #1 wait-for-interrupt + * #2 wait-for-interrupt and RAM self refresh + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/cpuidle.h> +#include <asm/proc-fns.h> +#include <linux/io.h> + +#include "pm.h" + +#define AT91_MAX_STATES 2 + +static DEFINE_PER_CPU(struct cpuidle_device, at91_cpuidle_device); + +static struct cpuidle_driver at91_idle_driver = { + .name = "at91_idle", + .owner = THIS_MODULE, +}; + +/* Actual code that puts the SoC in different idle states */ +static int at91_enter_idle(struct cpuidle_device *dev, + struct cpuidle_state *state) +{ + struct timeval before, after; + int idle_time; + u32 saved_lpr; + + local_irq_disable(); + do_gettimeofday(&before); + if (state == &dev->states[0]) + /* Wait for interrupt state */ + cpu_do_idle(); + else if (state == &dev->states[1]) { + asm("b 1f; .align 5; 1:"); + asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */ + saved_lpr = sdram_selfrefresh_enable(); + cpu_do_idle(); + sdram_selfrefresh_disable(saved_lpr); + } + do_gettimeofday(&after); + local_irq_enable(); + idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + + (after.tv_usec - before.tv_usec); + return idle_time; +} + +/* Initialize CPU idle by registering the idle states */ +static int at91_init_cpuidle(void) +{ + struct cpuidle_device *device; + + cpuidle_register_driver(&at91_idle_driver); + + device = &per_cpu(at91_cpuidle_device, smp_processor_id()); + device->state_count = AT91_MAX_STATES; + + /* Wait for interrupt state */ + device->states[0].enter = at91_enter_idle; + device->states[0].exit_latency = 1; + device->states[0].target_residency = 10000; + device->states[0].flags = CPUIDLE_FLAG_TIME_VALID; + strcpy(device->states[0].name, "WFI"); + strcpy(device->states[0].desc, "Wait for interrupt"); + + /* Wait for interrupt and RAM self refresh state */ + device->states[1].enter = at91_enter_idle; + device->states[1].exit_latency = 10; + device->states[1].target_residency = 10000; + device->states[1].flags = CPUIDLE_FLAG_TIME_VALID; + strcpy(device->states[1].name, "RAM_SR"); + strcpy(device->states[1].desc, "WFI and RAM Self Refresh"); + + if (cpuidle_register_device(device)) { + printk(KERN_ERR "at91_init_cpuidle: Failed registering\n"); + return -EIO; + } + return 0; +} + +device_initcall(at91_init_cpuidle); diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 2f4fcedc02b..2295d80dd89 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -98,6 +98,7 @@ struct at91_usbh_data { }; extern void __init at91_add_device_usbh(struct at91_usbh_data *data); extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data); +extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data); /* NAND / SmartMedia */ struct atmel_nand_data { diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 4028724d490..61566898648 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -29,62 +29,7 @@ #include <mach/cpu.h> #include "generic.h" - -#ifdef CONFIG_ARCH_AT91RM9200 -#include <mach/at91rm9200_mc.h> - -/* - * The AT91RM9200 goes into self-refresh mode with this command, and will - * terminate self-refresh automatically on the next SDRAM access. - */ -#define sdram_selfrefresh_enable() at91_sys_write(AT91_SDRAMC_SRR, 1) -#define sdram_selfrefresh_disable() do {} while (0) - -#elif defined(CONFIG_ARCH_AT91CAP9) -#include <mach/at91cap9_ddrsdr.h> - -static u32 saved_lpr; - -static inline void sdram_selfrefresh_enable(void) -{ - u32 lpr; - - saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR); - - lpr = saved_lpr & ~AT91_DDRSDRC_LPCB; - at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH); -} - -#define sdram_selfrefresh_disable() at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr) - -#else -#include <mach/at91sam9_sdramc.h> - -#ifdef CONFIG_ARCH_AT91SAM9263 -/* - * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use; - * handle those cases both here and in the Suspend-To-RAM support. - */ -#define AT91_SDRAMC AT91_SDRAMC0 -#warning Assuming EB1 SDRAM controller is *NOT* used -#endif - -static u32 saved_lpr; - -static inline void sdram_selfrefresh_enable(void) -{ - u32 lpr; - - saved_lpr = at91_sys_read(AT91_SDRAMC_LPR); - - lpr = saved_lpr & ~AT91_SDRAMC_LPCB; - at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH); -} - -#define sdram_selfrefresh_disable() at91_sys_write(AT91_SDRAMC_LPR, saved_lpr) - -#endif - +#include "pm.h" /* * Show the reason for the previous system reset. @@ -260,6 +205,7 @@ extern u32 at91_slow_clock_sz; static int at91_pm_enter(suspend_state_t state) { + u32 saved_lpr; at91_gpio_suspend(); at91_irq_suspend(); @@ -315,9 +261,9 @@ static int at91_pm_enter(suspend_state_t state) */ asm("b 1f; .align 5; 1:"); asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */ - sdram_selfrefresh_enable(); + saved_lpr = sdram_selfrefresh_enable(); asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */ - sdram_selfrefresh_disable(); + sdram_selfrefresh_disable(saved_lpr); break; case PM_SUSPEND_ON: diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h new file mode 100644 index 00000000000..08322c44df1 --- /dev/null +++ b/arch/arm/mach-at91/pm.h @@ -0,0 +1,67 @@ +#ifdef CONFIG_ARCH_AT91RM9200 +#include <mach/at91rm9200_mc.h> + +/* + * The AT91RM9200 goes into self-refresh mode with this command, and will + * terminate self-refresh automatically on the next SDRAM access. + * + * Self-refresh mode is exited as soon as a memory access is made, but we don't + * know for sure when that happens. However, we need to restore the low-power + * mode if it was enabled before going idle. Restoring low-power mode while + * still in self-refresh is "not recommended", but seems to work. + */ + +static inline u32 sdram_selfrefresh_enable(void) +{ + u32 saved_lpr = at91_sys_read(AT91_SDRAMC_LPR); + + at91_sys_write(AT91_SDRAMC_LPR, 0); + at91_sys_write(AT91_SDRAMC_SRR, 1); + return saved_lpr; +} + +#define sdram_selfrefresh_disable(saved_lpr) at91_sys_write(AT91_SDRAMC_LPR, saved_lpr) + +#elif defined(CONFIG_ARCH_AT91CAP9) +#include <mach/at91cap9_ddrsdr.h> + + +static inline u32 sdram_selfrefresh_enable(void) +{ + u32 saved_lpr, lpr; + + saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR); + + lpr = saved_lpr & ~AT91_DDRSDRC_LPCB; + at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH); + return saved_lpr; +} + +#define sdram_selfrefresh_disable(saved_lpr) at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr) + +#else +#include <mach/at91sam9_sdramc.h> + +#ifdef CONFIG_ARCH_AT91SAM9263 +/* + * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use; + * handle those cases both here and in the Suspend-To-RAM support. + */ +#define AT91_SDRAMC AT91_SDRAMC0 +#warning Assuming EB1 SDRAM controller is *NOT* used +#endif + +static inline u32 sdram_selfrefresh_enable(void) +{ + u32 saved_lpr, lpr; + + saved_lpr = at91_sys_read(AT91_SDRAMC_LPR); + + lpr = saved_lpr & ~AT91_SDRAMC_LPCB; + at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH); + return saved_lpr; +} + +#define sdram_selfrefresh_disable(saved_lpr) at91_sys_write(AT91_SDRAMC_LPR, saved_lpr) + +#endif diff --git a/arch/arm/mach-bcmring/include/mach/io.h b/arch/arm/mach-bcmring/include/mach/io.h index 4db0eff9035..dae5e9b166e 100644 --- a/arch/arm/mach-bcmring/include/mach/io.h +++ b/arch/arm/mach-bcmring/include/mach/io.h @@ -23,34 +23,11 @@ #define IO_SPACE_LIMIT 0xffffffff -#define __io(a) ((void __iomem *)HW_IO_PHYS_TO_VIRT(a)) - -/* Do not enable mem_pci for a big endian arm architecture or unexpected byteswaps will */ -/* happen in readw/writew etc. */ - -#define readb(c) __raw_readb(c) -#define readw(c) __raw_readw(c) -#define readl(c) __raw_readl(c) -#define readb_relaxed(addr) readb(addr) -#define readw_relaxed(addr) readw(addr) -#define readl_relaxed(addr) readl(addr) - -#define readsb(p, d, l) __raw_readsb(p, d, l) -#define readsw(p, d, l) __raw_readsw(p, d, l) -#define readsl(p, d, l) __raw_readsl(p, d, l) - -#define writeb(v, c) __raw_writeb(v, c) -#define writew(v, c) __raw_writew(v, c) -#define writel(v, c) __raw_writel(v, c) - -#define writesb(p, d, l) __raw_writesb(p, d, l) -#define writesw(p, d, l) __raw_writesw(p, d, l) -#define writesl(p, d, l) __raw_writesl(p, d, l) - -#define memset_io(c, v, l) _memset_io((c), (v), (l)) -#define memcpy_fromio(a, c, l) _memcpy_fromio((a), (c), (l)) -#define memcpy_toio(c, a, l) _memcpy_toio((c), (a), (l)) - -#define eth_io_copy_and_sum(s, c, l, b) eth_copy_and_sum((s), (c), (l), (b)) +/* + * We don't actually have real ISA nor PCI buses, but there is so many + * drivers out there that might just work if we fake them... + */ +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) #endif diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h index 42ae29b288a..25b1da9a503 100644 --- a/arch/arm/mach-iop13xx/include/mach/memory.h +++ b/arch/arm/mach-iop13xx/include/mach/memory.h @@ -64,6 +64,8 @@ static inline unsigned long __lbus_to_virt(dma_addr_t x) (dma_addr_t)page_to_phys(page); \ }) +#define __arch_dma_to_page(dev, addr) phys_to_page(addr) + #endif /* CONFIG_ARCH_IOP13XX */ #endif /* !ASSEMBLY */ diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h index 76e5308685a..ffa19aae6e0 100644 --- a/arch/arm/mach-ks8695/include/mach/memory.h +++ b/arch/arm/mach-ks8695/include/mach/memory.h @@ -41,6 +41,13 @@ extern struct bus_type platform_bus_type; __dma = __dma - PHYS_OFFSET + KS8695_PCIMEM_PA; \ __dma; }) +#define __arch_dma_to_page(dev, x) \ + ({ dma_addr_t __dma = x; \ + if (!is_lbus_device(dev)) \ + __dma += PHYS_OFFSET - KS8695_PCIMEM_PA; \ + phys_to_page(__dma); \ + }) + #endif #endif diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index 2a02b49c40f..3c5e0f522e9 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -5,13 +5,13 @@ menu "Nomadik boards" config MACH_NOMADIK_8815NHK bool "ST 8815 Nomadik Hardware Kit (evaluation board)" select NOMADIK_8815 + select HAS_MTU endmenu config NOMADIK_8815 bool - config I2C_BITBANG_8815NHK tristate "Driver for bit-bang busses found on the 8815 NHK" depends on I2C && MACH_NOMADIK_8815NHK diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile index 412040982a4..36f67fb207d 100644 --- a/arch/arm/mach-nomadik/Makefile +++ b/arch/arm/mach-nomadik/Makefile @@ -7,7 +7,7 @@ # Object file lists. -obj-y += clock.o timer.o gpio.o +obj-y += clock.o gpio.o # Cpu revision obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index 6bfd537d5af..116394484e7 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -25,11 +25,18 @@ #include <asm/mach/arch.h> #include <asm/mach/irq.h> #include <asm/mach/flash.h> + +#include <plat/mtu.h> + #include <mach/setup.h> #include <mach/nand.h> #include <mach/fsmc.h> #include "clock.h" +/* Initial value for SRC control register: all timers use MXTAL/8 source */ +#define SRC_CR_INIT_MASK 0x00007fff +#define SRC_CR_INIT_VAL 0x2aaa8000 + /* These adresses span 16MB, so use three individual pages */ static struct resource nhk8815_nand_resources[] = { { @@ -239,6 +246,26 @@ static struct platform_device *nhk8815_platform_devices[] __initdata = { /* will add more devices */ }; +static void __init nomadik_timer_init(void) +{ + u32 src_cr; + + /* Configure timer sources in "system reset controller" ctrl reg */ + src_cr = readl(io_p2v(NOMADIK_SRC_BASE)); + src_cr &= SRC_CR_INIT_MASK; + src_cr |= SRC_CR_INIT_VAL; + writel(src_cr, io_p2v(NOMADIK_SRC_BASE)); + + /* Save global pointer to mtu, used by platform timer code */ + mtu_base = io_p2v(NOMADIK_MTU0_BASE); + + nmdk_timer_init(); +} + +static struct sys_timer nomadik_timer = { + .init = nomadik_timer_init, +}; + static void __init nhk8815_platform_init(void) { int i; diff --git a/arch/arm/mach-nomadik/include/mach/setup.h b/arch/arm/mach-nomadik/include/mach/setup.h index a4e468cf63d..b7897edf1f3 100644 --- a/arch/arm/mach-nomadik/include/mach/setup.h +++ b/arch/arm/mach-nomadik/include/mach/setup.h @@ -15,7 +15,7 @@ extern void cpu8815_map_io(void); extern void cpu8815_platform_init(void); extern void cpu8815_init_irq(void); -extern struct sys_timer nomadik_timer; +extern void nmdk_timer_init(void); #endif /* NOMADIK_8815 */ diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index aad194f61a3..6f1bbbc4d15 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -100,3 +100,11 @@ config MACH_OMAP_ZOOM2 config MACH_OMAP_4430SDP bool "OMAP 4430 SDP board" depends on ARCH_OMAP4 + +config OMAP3_EMU + bool "OMAP3 debugging peripherals" + depends on ARCH_OMAP3 + select OC_ETM + help + Say Y here to enable debugging hardware of omap3 + diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 8cb16777661..e141cabcfcc 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -44,6 +44,9 @@ obj-$(CONFIG_ARCH_OMAP4) += cm4xxx.o obj-$(CONFIG_ARCH_OMAP2) += clock24xx.o obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o +# EMU peripherals +obj-$(CONFIG_OMAP3_EMU) += emu.o + iommu-y += iommu2.o iommu-$(CONFIG_ARCH_OMAP3) += omap3-iommu.o diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 7c5c00df3c7..066e88a1882 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -119,7 +119,7 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_343X), CLK(NULL, "dpll3_m3_ck", &dpll3_m3_ck, CK_343X), CLK(NULL, "dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_343X), - CLK(NULL, "emu_core_alwon_ck", &emu_core_alwon_ck, CK_343X), + CLK("etb", "emu_core_alwon_ck", &emu_core_alwon_ck, CK_343X), CLK(NULL, "dpll4_ck", &dpll4_ck, CK_343X), CLK(NULL, "dpll4_x2_ck", &dpll4_x2_ck, CK_343X), CLK(NULL, "omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_343X), @@ -138,7 +138,7 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_343X), CLK(NULL, "dpll4_m6_ck", &dpll4_m6_ck, CK_343X), CLK(NULL, "dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_343X), - CLK(NULL, "emu_per_alwon_ck", &emu_per_alwon_ck, CK_343X), + CLK("etb", "emu_per_alwon_ck", &emu_per_alwon_ck, CK_343X), CLK(NULL, "dpll5_ck", &dpll5_ck, CK_3430ES2), CLK(NULL, "dpll5_m2_ck", &dpll5_m2_ck, CK_3430ES2), CLK(NULL, "clkout2_src_ck", &clkout2_src_ck, CK_343X), @@ -147,7 +147,7 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "dpll1_fck", &dpll1_fck, CK_343X), CLK(NULL, "mpu_ck", &mpu_ck, CK_343X), CLK(NULL, "arm_fck", &arm_fck, CK_343X), - CLK(NULL, "emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_343X), + CLK("etb", "emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_343X), CLK(NULL, "dpll2_fck", &dpll2_fck, CK_343X), CLK(NULL, "iva2_ck", &iva2_ck, CK_343X), CLK(NULL, "l3_ick", &l3_ick, CK_343X), @@ -302,7 +302,7 @@ static struct omap_clk omap34xx_clks[] = { CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_343X), CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_343X), CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_343X), - CLK(NULL, "emu_src_ck", &emu_src_ck, CK_343X), + CLK("etb", "emu_src_ck", &emu_src_ck, CK_343X), CLK(NULL, "pclk_fck", &pclk_fck, CK_343X), CLK(NULL, "pclkx2_fck", &pclkx2_fck, CK_343X), CLK(NULL, "atclk_fck", &atclk_fck, CK_343X), diff --git a/arch/arm/mach-omap2/emu.c b/arch/arm/mach-omap2/emu.c new file mode 100644 index 00000000000..ec0d984a26f --- /dev/null +++ b/arch/arm/mach-omap2/emu.c @@ -0,0 +1,66 @@ +/* + * emu.c + * + * ETM and ETB CoreSight components' resources as found in OMAP3xxx. + * + * Copyright (C) 2009 Nokia Corporation. + * Alexander Shishkin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/amba/bus.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/err.h> + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Alexander Shishkin"); + +/* Cortex CoreSight components within omap3xxx EMU */ +#define ETM_BASE (L4_EMU_34XX_PHYS + 0x10000) +#define DBG_BASE (L4_EMU_34XX_PHYS + 0x11000) +#define ETB_BASE (L4_EMU_34XX_PHYS + 0x1b000) +#define DAPCTL (L4_EMU_34XX_PHYS + 0x1d000) + +static struct amba_device omap3_etb_device = { + .dev = { + .init_name = "etb", + }, + .res = { + .start = ETB_BASE, + .end = ETB_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .periphid = 0x000bb907, +}; + +static struct amba_device omap3_etm_device = { + .dev = { + .init_name = "etm", + }, + .res = { + .start = ETM_BASE, + .end = ETM_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .periphid = 0x102bb921, +}; + +static int __init emu_init(void) +{ + amba_device_register(&omap3_etb_device, &iomem_resource); + amba_device_register(&omap3_etm_device, &iomem_resource); + + return 0; +} + +subsys_initcall(emu_init); + diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c index 983cc8c2008..9e4d9816726 100644 --- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c +++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c @@ -447,6 +447,7 @@ static __init int pxa_cpufreq_init(struct cpufreq_policy *policy) pxa27x_freq_table[i].frequency = freq; pxa27x_freq_table[i].index = i; } + pxa27x_freq_table[i].index = i; pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END; /* diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c index 67f34a8d8e6..149cdd9aee4 100644 --- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c +++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c @@ -102,7 +102,7 @@ static int setup_freqs_table(struct cpufreq_policy *policy, table[i].index = i; table[i].frequency = freqs[i].cpufreq_mhz * 1000; } - table[num].frequency = i; + table[num].index = i; table[num].frequency = CPUFREQ_TABLE_END; pxa3xx_freqs = freqs; diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 3da45d05174..d98023f5550 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -802,10 +802,12 @@ static void __init spitz_init(void) { spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON; +#ifdef CONFIG_MACH_BORZOI if (machine_is_borzoi()) { sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt; sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo; } +#endif platform_scoop_config = &spitz_pcmcia_config; diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile index 885b5c027c1..fab46fe9a71 100644 --- a/arch/arm/mach-u300/Makefile +++ b/arch/arm/mach-u300/Makefile @@ -12,3 +12,4 @@ obj-$(CONFIG_MMC) += mmc.o obj-$(CONFIG_SPI_PL022) += spi.o obj-$(CONFIG_MACH_U300_SPIDUMMY) += dummyspichip.o obj-$(CONFIG_I2C_STU300) += i2c.o +obj-$(CONFIG_REGULATOR_AB3100) += regulator.o diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c index 10be1f888b2..c73ed06b606 100644 --- a/arch/arm/mach-u300/i2c.c +++ b/arch/arm/mach-u300/i2c.c @@ -9,13 +9,257 @@ */ #include <linux/kernel.h> #include <linux/i2c.h> +#include <linux/mfd/ab3100.h> +#include <linux/regulator/machine.h> +#include <linux/amba/bus.h> #include <mach/irqs.h> +/* + * Initial settings of ab3100 registers. + * Common for below LDO regulator settings are that + * bit 7-5 controls voltage. Bit 4 turns regulator ON(1) or OFF(0). + * Bit 3-2 controls sleep enable and bit 1-0 controls sleep mode. + */ + +/* LDO_A 0x16: 2.75V, ON, SLEEP_A, SLEEP OFF GND */ +#define LDO_A_SETTING 0x16 +/* LDO_C 0x10: 2.65V, ON, SLEEP_A or B, SLEEP full power */ +#define LDO_C_SETTING 0x10 +/* LDO_D 0x10: 2.65V, ON, sleep mode not used */ +#define LDO_D_SETTING 0x10 +/* LDO_E 0x10: 1.8V, ON, SLEEP_A or B, SLEEP full power */ +#define LDO_E_SETTING 0x10 +/* LDO_E SLEEP 0x00: 1.8V, not used, SLEEP_A or B, not used */ +#define LDO_E_SLEEP_SETTING 0x00 +/* LDO_F 0xD0: 2.5V, ON, SLEEP_A or B, SLEEP full power */ +#define LDO_F_SETTING 0xD0 +/* LDO_G 0x00: 2.85V, OFF, SLEEP_A or B, SLEEP full power */ +#define LDO_G_SETTING 0x00 +/* LDO_H 0x18: 2.75V, ON, SLEEP_B, SLEEP full power */ +#define LDO_H_SETTING 0x18 +/* LDO_K 0x00: 2.75V, OFF, SLEEP_A or B, SLEEP full power */ +#define LDO_K_SETTING 0x00 +/* LDO_EXT 0x00: Voltage not set, OFF, not used, not used */ +#define LDO_EXT_SETTING 0x00 +/* BUCK 0x7D: 1.2V, ON, SLEEP_A and B, SLEEP low power */ +#define BUCK_SETTING 0x7D +/* BUCK SLEEP 0xAC: 1.05V, Not used, SLEEP_A and B, Not used */ +#define BUCK_SLEEP_SETTING 0xAC + +static struct regulator_consumer_supply supply_ldo_c[] = { + { + .dev_name = "ab3100-codec", + .supply = "vaudio", /* Powers the codec */ + }, +}; + +/* + * This one needs to be a supply so we can turn it off + * in order to shut down the system. + */ +static struct regulator_consumer_supply supply_ldo_d[] = { + { + .dev = NULL, + .supply = "vana15", /* Powers the SoC (CPU etc) */ + }, +}; + +static struct regulator_consumer_supply supply_ldo_g[] = { + { + .dev_name = "mmci", + .supply = "vmmc", /* Powers MMC/SD card */ + }, +}; + +static struct regulator_consumer_supply supply_ldo_h[] = { + { + .dev_name = "xgam_pdi", + .supply = "vdisp", /* Powers camera, display etc */ + }, +}; + +static struct regulator_consumer_supply supply_ldo_k[] = { + { + .dev_name = "irda", + .supply = "vir", /* Power IrDA */ + }, +}; + +/* + * This is a placeholder for whoever wish to use the + * external power. + */ +static struct regulator_consumer_supply supply_ldo_ext[] = { + { + .dev = NULL, + .supply = "vext", /* External power */ + }, +}; + +/* Preset (hardware defined) voltages for these regulators */ +#define LDO_A_VOLTAGE 2750000 +#define LDO_C_VOLTAGE 2650000 +#define LDO_D_VOLTAGE 2650000 + +static struct ab3100_platform_data ab3100_plf_data = { + .reg_constraints = { + /* LDO A routing and constraints */ + { + .constraints = { + .name = "vrad", + .min_uV = LDO_A_VOLTAGE, + .max_uV = LDO_A_VOLTAGE, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .always_on = 1, + .boot_on = 1, + }, + }, + /* LDO C routing and constraints */ + { + .constraints = { + .min_uV = LDO_C_VOLTAGE, + .max_uV = LDO_C_VOLTAGE, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + }, + .num_consumer_supplies = ARRAY_SIZE(supply_ldo_c), + .consumer_supplies = supply_ldo_c, + }, + /* LDO D routing and constraints */ + { + .constraints = { + .min_uV = LDO_D_VOLTAGE, + .max_uV = LDO_D_VOLTAGE, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + /* + * Actually this is boot_on but we need + * to reference count it externally to + * be able to shut down the system. + */ + }, + .num_consumer_supplies = ARRAY_SIZE(supply_ldo_d), + .consumer_supplies = supply_ldo_d, + }, + /* LDO E routing and constraints */ + { + .constraints = { + .name = "vio", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + .always_on = 1, + .boot_on = 1, + }, + }, + /* LDO F routing and constraints */ + { + .constraints = { + .name = "vana25", + .min_uV = 2500000, + .max_uV = 2500000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + .always_on = 1, + .boot_on = 1, + }, + }, + /* LDO G routing and constraints */ + { + .constraints = { + .min_uV = 1500000, + .max_uV = 2850000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(supply_ldo_g), + .consumer_supplies = supply_ldo_g, + }, + /* LDO H routing and constraints */ + { + .constraints = { + .min_uV = 1200000, + .max_uV = 2750000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(supply_ldo_h), + .consumer_supplies = supply_ldo_h, + }, + /* LDO K routing and constraints */ + { + .constraints = { + .min_uV = 1800000, + .max_uV = 2750000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(supply_ldo_k), + .consumer_supplies = supply_ldo_k, + }, + /* External regulator interface. No fixed voltage specified. + * If we knew the voltage of the external regulator and it + * was connected on the board, we could add the (fixed) + * voltage for it here. + */ + { + .constraints = { + .min_uV = 0, + .max_uV = 0, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = + REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(supply_ldo_ext), + .consumer_supplies = supply_ldo_ext, + }, + /* Buck converter routing and constraints */ + { + .constraints = { + .name = "vcore", + .min_uV = 1200000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + .always_on = 1, + .boot_on = 1, + }, + }, + }, + .reg_initvals = { + LDO_A_SETTING, + LDO_C_SETTING, + LDO_E_SETTING, + LDO_E_SLEEP_SETTING, + LDO_F_SETTING, + LDO_G_SETTING, + LDO_H_SETTING, + LDO_K_SETTING, + LDO_EXT_SETTING, + BUCK_SETTING, + BUCK_SLEEP_SETTING, + LDO_D_SETTING, + }, +}; + static struct i2c_board_info __initdata bus0_i2c_board_info[] = { { .type = "ab3100", .addr = 0x48, .irq = IRQ_U300_IRQ0_EXT, + .platform_data = &ab3100_plf_data, }, }; @@ -38,6 +282,11 @@ void __init u300_i2c_register_board_devices(void) { i2c_register_board_info(0, bus0_i2c_board_info, ARRAY_SIZE(bus0_i2c_board_info)); + /* + * This makes the core shut down all unused regulators + * after all the initcalls have completed. + */ + regulator_has_full_constraints(); i2c_register_board_info(1, bus1_i2c_board_info, ARRAY_SIZE(bus1_i2c_board_info)); } diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c index 7b6b016786b..109f5a6e71c 100644 --- a/arch/arm/mach-u300/mmc.c +++ b/arch/arm/mach-u300/mmc.c @@ -40,64 +40,6 @@ static unsigned int mmc_status(struct device *dev) return mmci_card->mmc_inserted; } -/* - * Here follows a large chunk of code which will only be enabled if you - * have both the AB3100 chip mounted and the MMC subsystem activated. - */ - -static u32 mmc_translate_vdd(struct device *dev, unsigned int voltage) -{ - int v; - - /* - * MMC Spec: - * bit 7: 1.70 - 1.95V - * bit 8 - 14: 2.0 - 2.6V - * bit 15 - 23: 2.7 - 3.6V - * - * ab3100 voltages: - * 000 - 2.85V - * 001 - 2.75V - * 010 - 1.8V - * 011 - 1.5V - */ - switch (voltage) { - case 8: - v = 3; - break; - case 9: - case 10: - case 11: - case 12: - case 13: - case 14: - case 15: - v = 1; - break; - case 16: - v = 1; - break; - case 17: - case 18: - case 19: - case 20: - case 21: - case 22: - case 23: - case 24: - v = 0; - break; - default: - v = 0; - break; - } - - /* PL180 voltage register bits */ - return v << 2; -} - - - static int mmci_callback(void *data) { struct mmci_card_event *mmci_card = data; @@ -154,9 +96,11 @@ int __devinit mmc_init(struct amba_device *adev) if (!mmci_card) return -ENOMEM; + /* + * Do not set ocr_mask or voltage translation function, + * we have a regulator we can control instead. + */ /* Nominally 2.85V on our platform */ - mmci_card->mmc0_plat_data.ocr_mask = MMC_VDD_28_29; - mmci_card->mmc0_plat_data.translate_vdd = mmc_translate_vdd; mmci_card->mmc0_plat_data.status = mmc_status; mmci_card->mmc0_plat_data.gpio_wp = -1; mmci_card->mmc0_plat_data.gpio_cd = -1; diff --git a/arch/arm/mach-u300/regulator.c b/arch/arm/mach-u300/regulator.c new file mode 100644 index 00000000000..9c53f01c62e --- /dev/null +++ b/arch/arm/mach-u300/regulator.c @@ -0,0 +1,88 @@ +/* + * arch/arm/mach-u300/regulator.c + * + * Copyright (C) 2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Handle board-bound regulators and board power not related + * to any devices. + * Author: Linus Walleij <linus.walleij@stericsson.com> + */ +#include <linux/device.h> +#include <linux/signal.h> +#include <linux/err.h> +#include <linux/regulator/consumer.h> +/* Those are just for writing in syscon */ +#include <linux/io.h> +#include <mach/hardware.h> +#include <mach/syscon.h> + +/* + * Regulators that power the board and chip and which are + * not copuled to specific drivers are hogged in these + * instances. + */ +static struct regulator *main_power_15; + +/* + * This function is used from pm.h to shut down the system by + * resetting all regulators in turn and then disable regulator + * LDO D (main power). + */ +void u300_pm_poweroff(void) +{ + sigset_t old, all; + + sigfillset(&all); + if (!sigprocmask(SIG_BLOCK, &all, &old)) { + /* Disable LDO D to shut down the system */ + if (main_power_15) + regulator_disable(main_power_15); + else + pr_err("regulator not available to shut down system\n"); + (void) sigprocmask(SIG_SETMASK, &old, NULL); + } + return; +} + +/* + * Hog the regulators needed to power up the board. + */ +static int __init u300_init_boardpower(void) +{ + int err; + u32 val; + + pr_info("U300: setting up board power\n"); + main_power_15 = regulator_get(NULL, "vana15"); + if (IS_ERR(main_power_15)) { + pr_err("could not get vana15"); + return PTR_ERR(main_power_15); + } + err = regulator_enable(main_power_15); + if (err) { + pr_err("could not enable vana15\n"); + return err; + } + + /* + * On U300 a special system controller register pulls up the DC + * until the vana15 (LDO D) regulator comes up. At this point, all + * regulators are set and we do not need power control via + * DC ON anymore. This function will likely be moved whenever + * the rest of the U300 power management is implemented. + */ + pr_info("U300: disable system controller pull-up\n"); + val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR); + val &= ~U300_SYSCON_PMCR_DCON_ENABLE; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR); + + /* Register globally exported PM poweroff hook */ + pm_power_off = u300_pm_poweroff; + + return 0; +} + +/* + * So at module init time we hog the regulator! + */ +module_init(u300_init_boardpower); diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig new file mode 100644 index 00000000000..03625d74485 --- /dev/null +++ b/arch/arm/mach-ux500/Kconfig @@ -0,0 +1,15 @@ +menu "ST-Ericsson platform type" + depends on ARCH_U8500 + +comment "ST-Ericsson Multicore Mobile Platforms" + +config MACH_U8500_MOP + bool "U8500 Early Development platform" + default y + select ARM_GIC + select HAS_MTU + help + Include support for mop500 development platform + based on U8500 architecture. The platform is based + on early drop silicon version of 8500. +endmenu diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile new file mode 100644 index 00000000000..95e6e24c004 --- /dev/null +++ b/arch/arm/mach-ux500/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the linux kernel, U8500 machine. +# + +obj-y := clock.o +obj-$(CONFIG_ARCH_U8500) += cpu-u8500.o +obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o +obj-$(CONFIG_SMP) += platsmp.o headsmp.o localtimer.o diff --git a/arch/arm/mach-ux500/Makefile.boot b/arch/arm/mach-ux500/Makefile.boot new file mode 100644 index 00000000000..c7e75acfe6c --- /dev/null +++ b/arch/arm/mach-ux500/Makefile.boot @@ -0,0 +1,4 @@ + zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 +initrd_phys-y := 0x00800000 + diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c new file mode 100644 index 00000000000..aa5afbcc90f --- /dev/null +++ b/arch/arm/mach-ux500/board-mop500.c @@ -0,0 +1,158 @@ +/* + * Copyright (C) 2008-2009 ST-Ericsson + * + * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/amba/bus.h> +#include <linux/amba/pl022.h> +#include <linux/spi/spi.h> + +#include <asm/localtimer.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <plat/mtu.h> + +#include <mach/hardware.h> +#include <mach/setup.h> + +#define __MEM_4K_RESOURCE(x) \ + .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM} + +/* These are active devices on this board */ +static struct amba_device uart0_device = { + .dev = { .init_name = "uart0" }, + __MEM_4K_RESOURCE(U8500_UART0_BASE), + .irq = {IRQ_UART0, NO_IRQ}, +}; + +static struct amba_device uart1_device = { + .dev = { .init_name = "uart1" }, + __MEM_4K_RESOURCE(U8500_UART1_BASE), + .irq = {IRQ_UART1, NO_IRQ}, +}; + +static struct amba_device uart2_device = { + .dev = { .init_name = "uart2" }, + __MEM_4K_RESOURCE(U8500_UART2_BASE), + .irq = {IRQ_UART2, NO_IRQ}, +}; + +static void ab4500_spi_cs_control(u32 command) +{ + /* set the FRM signal, which is CS - TODO */ +} + +struct pl022_config_chip ab4500_chip_info = { + .lbm = LOOPBACK_DISABLED, + .com_mode = INTERRUPT_TRANSFER, + .iface = SSP_INTERFACE_MOTOROLA_SPI, + /* we can act as master only */ + .hierarchy = SSP_MASTER, + .slave_tx_disable = 0, + .endian_rx = SSP_RX_MSB, + .endian_tx = SSP_TX_MSB, + .data_size = SSP_DATA_BITS_24, + .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM, + .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC, + .clk_phase = SSP_CLK_SECOND_EDGE, + .clk_pol = SSP_CLK_POL_IDLE_HIGH, + .cs_control = ab4500_spi_cs_control, +}; + +static struct spi_board_info u8500_spi_devices[] = { + { + .modalias = "ab4500", + .controller_data = &ab4500_chip_info, + .max_speed_hz = 12000000, + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_0, + .irq = IRQ_AB4500, + }, +}; + +static struct pl022_ssp_controller ssp0_platform_data = { + .bus_id = 0, + /* pl022 not yet supports dma */ + .enable_dma = 0, + /* on this platform, gpio 31,142,144,214 & + * 224 are connected as chip selects + */ + .num_chipselect = 5, +}; + +static struct amba_device pl022_device = { + .dev = { + .coherent_dma_mask = ~0, + .init_name = "pl022", + .platform_data = &ssp0_platform_data, + }, + .res = { + .start = U8500_SSP0_BASE, + .end = U8500_SSP0_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_SSP0, NO_IRQ }, + /* ST-Ericsson modified id */ + .periphid = SSP_PER_ID, +}; + +static struct amba_device *amba_devs[] __initdata = { + &uart0_device, + &uart1_device, + &uart2_device, + &pl022_device, +}; + +static void __init u8500_timer_init(void) +{ +#ifdef CONFIG_LOCAL_TIMERS + /* Setup the local timer base */ + twd_base = __io_address(U8500_TWD_BASE); +#endif + /* Setup the MTU base */ + mtu_base = __io_address(U8500_MTU0_BASE); + + nmdk_timer_init(); +} + +static struct sys_timer u8500_timer = { + .init = u8500_timer_init, +}; + +static void __init u8500_init_machine(void) +{ + int i; + + /* Register the active AMBA devices on this board */ + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) + amba_device_register(amba_devs[i], &iomem_resource); + + spi_register_board_info(u8500_spi_devices, + ARRAY_SIZE(u8500_spi_devices)); + + u8500_init_devices(); +} + +MACHINE_START(U8500, "ST-Ericsson MOP500 platform") + /* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */ + .phys_io = U8500_UART2_BASE, + .io_pg_offst = (IO_ADDRESS(U8500_UART2_BASE) >> 18) & 0xfffc, + .boot_params = 0x100, + .map_io = u8500_map_io, + .init_irq = u8500_init_irq, + /* we re-use nomadik timer here */ + .timer = &u8500_timer, + .init_machine = u8500_init_machine, +MACHINE_END diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c new file mode 100644 index 00000000000..20b6ebb6783 --- /dev/null +++ b/arch/arm/mach-ux500/clock.c @@ -0,0 +1,95 @@ +/* + * Copyright (C) 2009 ST-Ericsson + * heavily based on realview platform + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/mutex.h> + +#include <asm/clkdev.h> + +/* currently the clk structure + * just supports rate. This would + * be extended as and when new devices are + * added - TODO + */ +struct clk { + unsigned long rate; +}; + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return clk->rate; +} +EXPORT_SYMBOL(clk_get_rate); + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + /*TODO*/ + return rate; +} +EXPORT_SYMBOL(clk_round_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + clk->rate = rate; + return 0; +} +EXPORT_SYMBOL(clk_set_rate); + +/* ssp clock */ +static struct clk ssp_clk = { + .rate = 48000000, +}; + +/* fixed clock */ +static struct clk f38_clk = { + .rate = 38400000, +}; + +static struct clk_lookup lookups[] = { + { + /* UART0 */ + .dev_id = "uart0", + .clk = &f38_clk, + }, { /* UART1 */ + .dev_id = "uart1", + .clk = &f38_clk, + }, { /* UART2 */ + .dev_id = "uart2", + .clk = &f38_clk, + }, { /* SSP */ + .dev_id = "pl022", + .clk = &ssp_clk, + } +}; + +static int __init clk_init(void) +{ + int i; + + /* register the clock lookups */ + for (i = 0; i < ARRAY_SIZE(lookups); i++) + clkdev_add(&lookups[i]); + return 0; +} +arch_initcall(clk_init); diff --git a/arch/arm/mach-ux500/cpu-u8500.c b/arch/arm/mach-ux500/cpu-u8500.c new file mode 100644 index 00000000000..5f05e5850f7 --- /dev/null +++ b/arch/arm/mach-ux500/cpu-u8500.c @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2008-2009 ST-Ericsson + * + * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + */ +#include <linux/types.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/amba/bus.h> +#include <linux/irq.h> +#include <linux/platform_device.h> + +#include <asm/hardware/gic.h> +#include <asm/mach/map.h> +#include <mach/hardware.h> + +/* add any platform devices here - TODO */ +static struct platform_device *platform_devs[] __initdata = { + /* yet to be added, add i2c0, gpio.. */ +}; + +#define __IO_DEV_DESC(x, sz) { \ + .virtual = IO_ADDRESS(x), \ + .pfn = __phys_to_pfn(x), \ + .length = sz, \ + .type = MT_DEVICE, \ +} + +/* minimum static i/o mapping required to boot U8500 platforms */ +static struct map_desc u8500_io_desc[] __initdata = { + __IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K), + __IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K), + __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K), + __IO_DEV_DESC(U8500_TWD_BASE, SZ_4K), + __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K), + __IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K), +}; + +void __init u8500_map_io(void) +{ + iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc)); +} + +void __init u8500_init_irq(void) +{ + gic_dist_init(0, __io_address(U8500_GIC_DIST_BASE), 29); + gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE)); +} + +/* + * This function is called from the board init + */ +void __init u8500_init_devices(void) +{ + /* Register the platform devices */ + platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); + + return ; +} diff --git a/arch/arm/mach-ux500/headsmp.S b/arch/arm/mach-ux500/headsmp.S new file mode 100644 index 00000000000..a6be2cdf2b2 --- /dev/null +++ b/arch/arm/mach-ux500/headsmp.S @@ -0,0 +1,38 @@ +/* + * Copyright (c) 2009 ST-Ericsson + * This file is based ARM Realview platform + * Copyright (c) 2003 ARM Limited + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <linux/init.h> + + __INIT + +/* + * U8500 specific entry point for secondary CPUs. + */ +ENTRY(u8500_secondary_startup) + mrc p15, 0, r0, c0, c0, 5 + and r0, r0, #15 + adr r4, 1f + ldmia r4, {r5, r6} + sub r4, r4, r5 + add r6, r6, r4 + dsb +pen: ldr r7, [r6] + cmp r7, r0 + bne pen + + /* + * we've been released from the holding pen: secondary_stack + * should now contain the SVC stack for this core + */ + b secondary_startup + +1: .long . + .long pen_release diff --git a/arch/arm/mach-ux500/include/mach/clkdev.h b/arch/arm/mach-ux500/include/mach/clkdev.h new file mode 100644 index 00000000000..04b37a89801 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/clkdev.h @@ -0,0 +1,7 @@ +#ifndef __ASM_MACH_CLKDEV_H +#define __ASM_MACH_CLKDEV_H + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +#endif diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S new file mode 100644 index 00000000000..8f21b6a95dc --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/debug-macro.S @@ -0,0 +1,19 @@ +/* + * Debugging macro include header + * + * Copyright (C) 2009 ST-Ericsson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @MMU enabled? + moveq \rx, #0x80000000 @MMU off, Physical address + movne \rx, #0xF0000000 @MMU on, Virtual address + orr \rx, \rx, #0x7000 + .endm + +#include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S new file mode 100644 index 00000000000..eece3301fef --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/entry-macro.S @@ -0,0 +1,89 @@ +/* + * Low-level IRQ helper macros for U8500 platforms + * + * Copyright (C) 2009 ST-Ericsson. + * + * This file is a copy of ARM Realview platform. + * -just satisfied checkpatch script. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <mach/hardware.h> +#include <asm/hardware/gic.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =IO_ADDRESS(U8500_GIC_CPU_BASE) + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + /* + * The interrupt numbering scheme is defined in the + * interrupt controller spec. To wit: + * + * Interrupts 0-15 are IPI + * 16-28 are reserved + * 29-31 are local. We allow 30 to be used for the watchdog. + * 32-1020 are global + * 1021-1022 are reserved + * 1023 is "spurious" (no interrupt) + * + * For now, we ignore all local interrupts so only return an + * interrupt if it's between 30 and 1020. The test_for_ipi + * routine below will pick up on IPIs. + * + * A simple read from the controller will tell us the number + * of the highest priority enabled interrupt. We then just + * need to check whether it is in the valid range for an + * IRQ (30-1020 inclusive). + */ + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + /* bits 12-10 = src CPU, 9-0 = int # */ + ldr \irqstat, [\base, #GIC_CPU_INTACK] + + ldr \tmp, =1021 + + bic \irqnr, \irqstat, #0x1c00 + + cmp \irqnr, #29 + cmpcc \irqnr, \irqnr + cmpne \irqnr, \tmp + cmpcs \irqnr, \irqnr + + .endm + + /* We assume that irqstat (the raw value of the IRQ + * acknowledge register) is preserved from the macro above. + * If there is an IPI, we immediately signal end of + * interrupt on the controller, since this requires the + * original irqstat value which we won't easily be able + * to recreate later. + */ + + .macro test_for_ipi, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + cmp \irqnr, #16 + strcc \irqstat, [\base, #GIC_CPU_EOI] + cmpcs \irqnr, \irqnr + .endm + + /* As above, this assumes that irqstat and base + * are preserved.. + */ + + .macro test_for_ltirq, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + mov \tmp, #0 + cmp \irqnr, #29 + moveq \tmp, #1 + streq \irqstat, [\base, #GIC_CPU_EOI] + cmp \tmp, #0 + .endm diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h new file mode 100644 index 00000000000..6da650202dc --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -0,0 +1,131 @@ +/* + * Copyright (C) 2009 ST-Ericsson. + * + * U8500 hardware definitions + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#ifndef __MACH_HARDWARE_H +#define __MACH_HARDWARE_H + +/* macros to get at IO space when running virtually + * We dont map all the peripherals, let ioremap do + * this for us. We map only very basic peripherals here. + */ +#define U8500_IO_VIRTUAL 0xf0000000 +#define U8500_IO_PHYSICAL 0xa0000000 + +/* this macro is used in assembly, so no cast */ +#define IO_ADDRESS(x) \ + (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL) + +/* typesafe io address */ +#define __io_address(n) __io(IO_ADDRESS(n)) + +/* + * Base address definitions for U8500 Onchip IPs. All the + * peripherals are contained in a single 1 Mbyte region, with + * AHB peripherals at the bottom and APB peripherals at the + * top of the region. PER stands for PERIPHERAL region which + * itself divided into sub regions. + */ +#define U8500_PER3_BASE 0x80000000 +#define U8500_PER2_BASE 0x80110000 +#define U8500_PER1_BASE 0x80120000 +#define U8500_PER4_BASE 0x80150000 + +#define U8500_PER6_BASE 0xa03c0000 +#define U8500_PER5_BASE 0xa03e0000 +#define U8500_PER7_BASE 0xa03d0000 + +#define U8500_SVA_BASE 0xa0100000 +#define U8500_SIA_BASE 0xa0200000 + +#define U8500_SGA_BASE 0xa0300000 +#define U8500_MCDE_BASE 0xa0350000 +#define U8500_DMA_BASE 0xa0362000 + +#define U8500_SCU_BASE 0xa0410000 +#define U8500_GIC_CPU_BASE 0xa0410100 +#define U8500_TWD_BASE 0xa0410600 +#define U8500_GIC_DIST_BASE 0xa0411000 +#define U8500_L2CC_BASE 0xa0412000 + +#define U8500_TWD_SIZE 0x100 + +/* per7 base addressess */ +#define U8500_CR_BASE (U8500_PER7_BASE + 0x8000) +#define U8500_MTU0_BASE (U8500_PER7_BASE + 0xa000) +#define U8500_MTU1_BASE (U8500_PER7_BASE + 0xb000) +#define U8500_TZPC0_BASE (U8500_PER7_BASE + 0xc000) +#define U8500_CLKRST7_BASE (U8500_PER7_BASE + 0xf000) + +/* per6 base addressess */ +#define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000) +#define U8500_PKA_BASE (U8500_PER6_BASE + 0x1000) +#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x2000) +#define U8500_CRYPTO0_BASE (U8500_PER6_BASE + 0xa000) +#define U8500_CRYPTO1_BASE (U8500_PER6_BASE + 0xb000) +#define U8500_CLKRST6_BASE (U8500_PER7_BASE + 0xf000) + +/* per5 base addressess */ +#define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000) +#define U8500_GPIO5_BASE (U8500_PER5_BASE + 0x1e000) +#define U8500_CLKRST5_BASE (U8500_PER7_BASE + 0x1f000) + +/* per4 base addressess */ +#define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x0000) +#define U8500_BACKUPRAM1_BASE (U8500_PER4_BASE + 0x1000) +#define U8500_RTT0_BASE (U8500_PER4_BASE + 0x2000) +#define U8500_RTT1_BASE (U8500_PER4_BASE + 0x3000) +#define U8500_RTC_BASE (U8500_PER4_BASE + 0x4000) +#define U8500_SCR_BASE (U8500_PER4_BASE + 0x5000) +#define U8500_DMC_BASE (U8500_PER4_BASE + 0x6000) +#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x7000) + +/* per3 base addressess */ +#define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000) +#define U8500_SSP0_BASE (U8500_PER3_BASE + 0x2000) +#define U8500_SSP1_BASE (U8500_PER3_BASE + 0x3000) +#define U8500_I2C0_BASE (U8500_PER3_BASE + 0x4000) +#define U8500_SDI2_BASE (U8500_PER3_BASE + 0x5000) +#define U8500_SKE_BASE (U8500_PER3_BASE + 0x6000) +#define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000) +#define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000) +#define U8500_GPIO3_BASE (U8500_PER3_BASE + 0xe000) +#define U8500_CLKRST3_BASE (U8500_PER7_BASE + 0xf000) + +/* per2 base addressess */ +#define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000) +#define U8500_SPI2_BASE (U8500_PER2_BASE + 0x1000) +#define U8500_SPI1_BASE (U8500_PER2_BASE + 0x2000) +#define U8500_PWL_BASE (U8500_PER2_BASE + 0x3000) +#define U8500_SDI4_BASE (U8500_PER2_BASE + 0x4000) +#define U8500_MSP2_BASE (U8500_PER2_BASE + 0x7000) +#define U8500_SDI1_BASE (U8500_PER2_BASE + 0x8000) +#define U8500_SDI3_BASE (U8500_PER2_BASE + 0x9000) +#define U8500_SPI0_BASE (U8500_PER2_BASE + 0xa000) +#define U8500_HSIR_BASE (U8500_PER2_BASE + 0xb000) +#define U8500_HSIT_BASE (U8500_PER2_BASE + 0xc000) +#define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xe000) +#define U8500_CLKRST2_BASE (U8500_PER2_BASE + 0xf000) + +/* per1 base addresses */ +#define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000) +#define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000) +#define U8500_I2C1_BASE (U8500_PER1_BASE + 0x2000) +#define U8500_MSP0_BASE (U8500_PER1_BASE + 0x3000) +#define U8500_MSP1_BASE (U8500_PER1_BASE + 0x4000) +#define U8500_SDI0_BASE (U8500_PER1_BASE + 0x6000) +#define U8500_I2C2_BASE (U8500_PER1_BASE + 0x8000) +#define U8500_SPI3_BASE (U8500_PER1_BASE + 0x9000) +#define U8500_SLIM0_BASE (U8500_PER1_BASE + 0xa000) +#define U8500_GPIO1_BASE (U8500_PER1_BASE + 0xe000) +#define U8500_CLKRST1_BASE (U8500_PER2_BASE + 0xf000) + +/* ST-Ericsson modified pl022 id */ +#define SSP_PER_ID 0x01080022 + +#endif /* __MACH_HARDWARE_H */ diff --git a/arch/arm/mach-ux500/include/mach/io.h b/arch/arm/mach-ux500/include/mach/io.h new file mode 100644 index 00000000000..1cf3f44ce5b --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/io.h @@ -0,0 +1,22 @@ +/* + * arch/arm/mach-u8500/include/mach/io.h + * + * Copyright (C) 1997-1999 Russell King + * + * Modifications: + * 06-12-1997 RMK Created. + * 07-04-1999 RMK Major cleanup + */ +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +/* + * We don't actually have real ISA nor PCI buses, but there is so many + * drivers out there that might just work if we fake them... + */ +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#endif diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h new file mode 100644 index 00000000000..394b5dd2200 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/irqs.h @@ -0,0 +1,71 @@ +/* + * Copyright (C) 2008 STMicroelectronics + * Copyright (C) 2009 ST-Ericsson. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef ASM_ARCH_IRQS_H +#define ASM_ARCH_IRQS_H + +#include <mach/hardware.h> + +#define IRQ_LOCALTIMER 29 +#define IRQ_LOCALWDOG 30 + +/* Shared Peripheral Interrupt (SHPI) */ +#define IRQ_SHPI_START 32 + +/* Interrupt numbers generic for shared peripheral */ +#define IRQ_MTU0 (IRQ_SHPI_START + 4) +#define IRQ_SPI2 (IRQ_SHPI_START + 6) +#define IRQ_SPI0 (IRQ_SHPI_START + 8) +#define IRQ_UART0 (IRQ_SHPI_START + 11) +#define IRQ_I2C3 (IRQ_SHPI_START + 12) +#define IRQ_SSP0 (IRQ_SHPI_START + 14) +#define IRQ_MTU1 (IRQ_SHPI_START + 17) +#define IRQ_RTC_RTT (IRQ_SHPI_START + 18) +#define IRQ_UART1 (IRQ_SHPI_START + 19) +#define IRQ_I2C0 (IRQ_SHPI_START + 21) +#define IRQ_I2C1 (IRQ_SHPI_START + 22) +#define IRQ_USBOTG (IRQ_SHPI_START + 23) +#define IRQ_DMA (IRQ_SHPI_START + 25) +#define IRQ_UART2 (IRQ_SHPI_START + 26) +#define IRQ_HSIR_EXCEP (IRQ_SHPI_START + 29) +#define IRQ_MSP0 (IRQ_SHPI_START + 31) +#define IRQ_HSIR_CH0_OVRRUN (IRQ_SHPI_START + 32) +#define IRQ_HSIR_CH1_OVRRUN (IRQ_SHPI_START + 33) +#define IRQ_HSIR_CH2_OVRRUN (IRQ_SHPI_START + 34) +#define IRQ_HSIR_CH3_OVRRUN (IRQ_SHPI_START + 35) +#define IRQ_AB4500 (IRQ_SHPI_START + 40) +#define IRQ_DISP (IRQ_SHPI_START + 48) +#define IRQ_SiPI3 (IRQ_SHPI_START + 49) +#define IRQ_SSP1 (IRQ_SHPI_START + 52) +#define IRQ_I2C2 (IRQ_SHPI_START + 55) +#define IRQ_SDMMC0 (IRQ_SHPI_START + 60) +#define IRQ_MSP1 (IRQ_SHPI_START + 62) +#define IRQ_SPI1 (IRQ_SHPI_START + 96) +#define IRQ_MSP2 (IRQ_SHPI_START + 98) +#define IRQ_SDMMC4 (IRQ_SHPI_START + 99) +#define IRQ_HSIRD0 (IRQ_SHPI_START + 104) +#define IRQ_HSIRD1 (IRQ_SHPI_START + 105) +#define IRQ_HSITD0 (IRQ_SHPI_START + 106) +#define IRQ_HSITD1 (IRQ_SHPI_START + 107) +#define IRQ_GPIO0 (IRQ_SHPI_START + 119) +#define IRQ_GPIO1 (IRQ_SHPI_START + 120) +#define IRQ_GPIO2 (IRQ_SHPI_START + 121) +#define IRQ_GPIO3 (IRQ_SHPI_START + 122) +#define IRQ_GPIO4 (IRQ_SHPI_START + 123) +#define IRQ_GPIO5 (IRQ_SHPI_START + 124) +#define IRQ_GPIO6 (IRQ_SHPI_START + 125) +#define IRQ_GPIO7 (IRQ_SHPI_START + 126) +#define IRQ_GPIO8 (IRQ_SHPI_START + 127) + +/* There are 128 shared peripheral interrupts assigned to + * INTID[160:32]. The first 32 interrupts are reserved. + */ +#define NR_IRQS 161 + +#endif /*ASM_ARCH_IRQS_H*/ diff --git a/arch/arm/mach-ux500/include/mach/memory.h b/arch/arm/mach-ux500/include/mach/memory.h new file mode 100644 index 00000000000..510571a59e2 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/memory.h @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2009 ST-Ericsson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +/* + * Physical DRAM offset. + */ +#define PHYS_OFFSET UL(0x00000000) +#define BUS_OFFSET UL(0x00000000) + +#endif diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h new file mode 100644 index 00000000000..cf0ce1687f2 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/setup.h @@ -0,0 +1,23 @@ +/* + * Copyright (C) 2009 ST-Ericsson. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * These symbols are needed for board-specific files to call their + * own cpu-specific files + */ +#ifndef __ASM_ARCH_SETUP_H +#define __ASM_ARCH_SETUP_H + +#include <asm/mach/time.h> +#include <linux/init.h> + +extern void u8500_map_io(void); +extern void u8500_init_devices(void); +extern void u8500_init_irq(void); +/* We re-use nomadik_timer for this platform */ +extern void nmdk_timer_init(void); + +#endif /* __ASM_ARCH_SETUP_H */ diff --git a/arch/arm/mach-ux500/include/mach/smp.h b/arch/arm/mach-ux500/include/mach/smp.h new file mode 100644 index 00000000000..b59f7bc9725 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/smp.h @@ -0,0 +1,32 @@ +/* + * This file is based ARM realview platform. + * Copyright (C) ARM Limited. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#ifndef ASMARM_ARCH_SMP_H +#define ASMARM_ARCH_SMP_H + +#include <asm/hardware/gic.h> + +/* This is required to wakeup the secondary core */ +extern void u8500_secondary_startup(void); + +#define hard_smp_processor_id() \ + ({ \ + unsigned int cpunum; \ + __asm__("mrc p15, 0, %0, c0, c0, 5" \ + : "=r" (cpunum)); \ + cpunum &= 0x0F; \ + }) + +/* + * We use IRQ1 as the IPI + */ +static inline void smp_cross_call(const struct cpumask *mask) +{ + gic_raise_softirq(mask, 1); +} +#endif diff --git a/arch/arm/mach-ux500/include/mach/system.h b/arch/arm/mach-ux500/include/mach/system.h new file mode 100644 index 00000000000..c0cd8006f1a --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/system.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2009 ST-Ericsson. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +static inline void arch_idle(void) +{ + /* + * This should do all the clock switching + * and wait for interrupt tricks + */ + cpu_do_idle(); +} + +static inline void arch_reset(char mode, const char *cmd) +{ + /* yet to be implemented - TODO */ +} + +#endif diff --git a/arch/arm/mach-ux500/include/mach/timex.h b/arch/arm/mach-ux500/include/mach/timex.h new file mode 100644 index 00000000000..d0942c17401 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/timex.h @@ -0,0 +1,6 @@ +#ifndef __ASM_ARCH_TIMEX_H +#define __ASM_ARCH_TIMEX_H + +#define CLOCK_TICK_RATE 110000000 + +#endif diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h new file mode 100644 index 00000000000..8552eb188b5 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/uncompress.h @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2009 ST-Ericsson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_UNCOMPRESS_H +#define __ASM_ARCH_UNCOMPRESS_H + +#include <asm/setup.h> +#include <linux/io.h> +#include <mach/hardware.h> + +#define U8500_UART_DR 0x80007000 +#define U8500_UART_LCRH 0x8000702c +#define U8500_UART_CR 0x80007030 +#define U8500_UART_FR 0x80007018 + +static void putc(const char c) +{ + /* Do nothing if the UART is not enabled. */ + if (!(readb(U8500_UART_CR) & 0x1)) + return; + + if (c == '\n') + putc('\r'); + + while (readb(U8500_UART_FR) & (1 << 5)) + barrier(); + writeb(c, U8500_UART_DR); +} + +static void flush(void) +{ + if (!(readb(U8500_UART_CR) & 0x1)) + return; + while (readb(U8500_UART_FR) & (1 << 3)) + barrier(); +} + +static inline void arch_decomp_setup(void) +{ +} + +#define arch_decomp_wdog() /* nothing to do here */ + +#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-ux500/include/mach/vmalloc.h b/arch/arm/mach-ux500/include/mach/vmalloc.h new file mode 100644 index 00000000000..86cdbbce184 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/vmalloc.h @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2009 ST-Ericsson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define VMALLOC_END 0xf0000000 diff --git a/arch/arm/mach-ux500/localtimer.c b/arch/arm/mach-ux500/localtimer.c new file mode 100644 index 00000000000..2288f6a7c51 --- /dev/null +++ b/arch/arm/mach-ux500/localtimer.c @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2008-2009 ST-Ericsson + * Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> + * + * This file is heavily based on relaview platform, almost a copy. + * + * Copyright (C) 2002 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/clockchips.h> + +#include <asm/irq.h> +#include <asm/smp_twd.h> +#include <asm/localtimer.h> + +/* + * Setup the local clock events for a CPU. + */ +void __cpuinit local_timer_setup(struct clock_event_device *evt) +{ + evt->irq = IRQ_LOCALTIMER; + twd_timer_setup(evt); +} diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c new file mode 100644 index 00000000000..8dfe7ca245d --- /dev/null +++ b/arch/arm/mach-ux500/platsmp.c @@ -0,0 +1,177 @@ +/* + * Copyright (C) 2002 ARM Ltd. + * Copyright (C) 2008 STMicroelctronics. + * Copyright (C) 2009 ST-Ericsson. + * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> + * + * This file is based on arm realview platform + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/smp.h> +#include <linux/io.h> + +#include <asm/cacheflush.h> +#include <asm/localtimer.h> +#include <asm/smp_scu.h> +#include <mach/hardware.h> + +/* + * control for which core is the next to come out of the secondary + * boot "holding pen" + */ +volatile int __cpuinitdata pen_release = -1; + +static unsigned int __init get_core_count(void) +{ + return scu_get_core_count(__io_address(U8500_SCU_BASE)); +} + +static DEFINE_SPINLOCK(boot_lock); + +void __cpuinit platform_secondary_init(unsigned int cpu) +{ + trace_hardirqs_off(); + + /* + * if any interrupts are already enabled for the primary + * core (e.g. timer irq), then they will not have been enabled + * for us: do so + */ + gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE)); + + /* + * let the primary processor know we're out of the + * pen, then head off into the C entry point + */ + pen_release = -1; + + /* + * Synchronise with the boot thread. + */ + spin_lock(&boot_lock); + spin_unlock(&boot_lock); +} + +int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned long timeout; + + /* + * set synchronisation state between this boot processor + * and the secondary one + */ + spin_lock(&boot_lock); + + /* + * The secondary processor is waiting to be released from + * the holding pen - release it, then wait for it to flag + * that it has been released by resetting pen_release. + */ + pen_release = cpu; + flush_cache_all(); + + timeout = jiffies + (1 * HZ); + while (time_before(jiffies, timeout)) { + if (pen_release == -1) + break; + } + + /* + * now the secondary core is starting up let it run its + * calibrations, then wait for it to finish + */ + spin_unlock(&boot_lock); + + return pen_release != -1 ? -ENOSYS : 0; +} + +static void __init wakeup_secondary(void) +{ + /* nobody is to be released from the pen yet */ + pen_release = -1; + + /* + * write the address of secondary startup into the backup ram register + * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the + * backup ram register at offset 0x1FF0, which is what boot rom code + * is waiting for. This would wake up the secondary core from WFE + */ +#define U8500_CPU1_JUMPADDR_OFFSET 0x1FF4 + __raw_writel(virt_to_phys(u8500_secondary_startup), + (void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) + + U8500_CPU1_JUMPADDR_OFFSET); + +#define U8500_CPU1_WAKEMAGIC_OFFSET 0x1FF0 + __raw_writel(0xA1FEED01, + (void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) + + U8500_CPU1_WAKEMAGIC_OFFSET); + + /* make sure write buffer is drained */ + mb(); +} + +/* + * Initialise the CPU possible map early - this describes the CPUs + * which may be present or become present in the system. + */ +void __init smp_init_cpus(void) +{ + unsigned int i, ncores = get_core_count(); + + for (i = 0; i < ncores; i++) + set_cpu_possible(i, true); +} + +void __init smp_prepare_cpus(unsigned int max_cpus) +{ + unsigned int ncores = get_core_count(); + unsigned int cpu = smp_processor_id(); + int i; + + /* sanity check */ + if (ncores == 0) { + printk(KERN_ERR + "U8500: strange CM count of 0? Default to 1\n"); + ncores = 1; + } + + if (ncores > num_possible_cpus()) { + printk(KERN_WARNING + "U8500: no. of cores (%d) greater than configured " + "maximum of %d - clipping\n", + ncores, num_possible_cpus()); + ncores = num_possible_cpus(); + } + + smp_store_cpu_info(cpu); + + /* + * are we trying to boot more cores than exist? + */ + if (max_cpus > ncores) + max_cpus = ncores; + + /* + * Initialise the present map, which describes the set of CPUs + * actually populated at the present time. + */ + for (i = 0; i < max_cpus; i++) + set_cpu_present(i, true); + + if (max_cpus > 1) { + /* + * Enable the local timer or broadcast device for the + * boot CPU, but only if we have more than one CPU. + */ + percpu_timer_setup(); + scu_enable(__io_address(U8500_SCU_BASE)); + wakeup_secondary(); + } +} diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c index 2a6f98de48d..51f17b75334 100644 --- a/arch/arm/mach-w90x900/dev.c +++ b/arch/arm/mach-w90x900/dev.c @@ -32,6 +32,7 @@ #include <asm/mach-types.h> #include <mach/regs-serial.h> +#include <mach/nuc900_spi.h> #include <mach/map.h> #include "cpu.h" @@ -196,6 +197,18 @@ static struct platform_device nuc900_device_emc = { /* SPI device */ +static struct w90p910_spi_info nuc900_spiflash_data = { + .num_cs = 1, + .lsb = 0, + .txneg = 1, + .rxneg = 0, + .divider = 24, + .sleep = 0, + .txnum = 0, + .txbitlen = 1, + .bus_num = 0, +}; + static struct resource nuc900_spi_resource[] = { [0] = { .start = W90X900_PA_I2C + SPIOFFSET, @@ -214,6 +227,9 @@ static struct platform_device nuc900_device_spi = { .id = -1, .num_resources = ARRAY_SIZE(nuc900_spi_resource), .resource = nuc900_spi_resource, + .dev = { + .platform_data = &nuc900_spiflash_data, + } }; /* spi device, spi flash info */ diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 9264d814cd7..7b7d4c36c11 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -774,5 +774,5 @@ config CACHE_XSC3L2 config ARM_L1_CACHE_SHIFT int - default 6 if ARCH_OMAP3 + default 6 if ARCH_OMAP3 || ARCH_S5PC1XX default 5 diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index 055cb2aa813..42352e75742 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -6,7 +6,7 @@ obj-y := dma-mapping.o extable.o fault.o init.o \ iomap.o obj-$(CONFIG_MMU) += fault-armv.o flush.o ioremap.o mmap.o \ - pgd.o mmu.o + pgd.o mmu.o vmregion.o ifneq ($(CONFIG_MMU),y) obj-y += nommu.o diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index b480f1d3591..747f9a9021b 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -99,18 +99,25 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) l2x0_base = base; - /* disable L2X0 */ - writel(0, l2x0_base + L2X0_CTRL); + /* + * Check if l2x0 controller is already enabled. + * If you are booting from non-secure mode + * accessing the below registers will fault. + */ + if (!(readl(l2x0_base + L2X0_CTRL) & 1)) { - aux = readl(l2x0_base + L2X0_AUX_CTRL); - aux &= aux_mask; - aux |= aux_val; - writel(aux, l2x0_base + L2X0_AUX_CTRL); + /* l2x0 controller is disabled */ - l2x0_inv_all(); + aux = readl(l2x0_base + L2X0_AUX_CTRL); + aux &= aux_mask; + aux |= aux_val; + writel(aux, l2x0_base + L2X0_AUX_CTRL); - /* enable L2X0 */ - writel(1, l2x0_base + L2X0_CTRL); + l2x0_inv_all(); + + /* enable L2X0 */ + writel(1, l2x0_base + L2X0_CTRL); + } outer_cache.inv_range = l2x0_inv_range; outer_cache.clean_range = l2x0_clean_range; diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c index 4127a7bddfe..841f355319b 100644 --- a/arch/arm/mm/copypage-v6.c +++ b/arch/arm/mm/copypage-v6.c @@ -41,6 +41,14 @@ static void v6_copy_user_highpage_nonaliasing(struct page *to, kfrom = kmap_atomic(from, KM_USER0); kto = kmap_atomic(to, KM_USER1); copy_page(kto, kfrom); +#ifdef CONFIG_HIGHMEM + /* + * kmap_atomic() doesn't set the page virtual address, and + * kunmap_atomic() takes care of cache flushing already. + */ + if (page_address(to) != NULL) +#endif + __cpuc_flush_dcache_page(kto); kunmap_atomic(kto, KM_USER1); kunmap_atomic(kfrom, KM_USER0); } diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index b9590a7085c..26325cb5d36 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -63,194 +63,152 @@ static u64 get_coherent_dma_mask(struct device *dev) return mask; } -#ifdef CONFIG_MMU /* - * These are the page tables (2MB each) covering uncached, DMA consistent allocations + * Allocate a DMA buffer for 'dev' of size 'size' using the + * specified gfp mask. Note that 'size' must be page aligned. */ -static pte_t *consistent_pte[NUM_CONSISTENT_PTES]; -static DEFINE_SPINLOCK(consistent_lock); +static struct page *__dma_alloc_buffer(struct device *dev, size_t size, gfp_t gfp) +{ + unsigned long order = get_order(size); + struct page *page, *p, *e; + void *ptr; + u64 mask = get_coherent_dma_mask(dev); -/* - * VM region handling support. - * - * This should become something generic, handling VM region allocations for - * vmalloc and similar (ioremap, module space, etc). - * - * I envisage vmalloc()'s supporting vm_struct becoming: - * - * struct vm_struct { - * struct vm_region region; - * unsigned long flags; - * struct page **pages; - * unsigned int nr_pages; - * unsigned long phys_addr; - * }; - * - * get_vm_area() would then call vm_region_alloc with an appropriate - * struct vm_region head (eg): - * - * struct vm_region vmalloc_head = { - * .vm_list = LIST_HEAD_INIT(vmalloc_head.vm_list), - * .vm_start = VMALLOC_START, - * .vm_end = VMALLOC_END, - * }; - * - * However, vmalloc_head.vm_start is variable (typically, it is dependent on - * the amount of RAM found at boot time.) I would imagine that get_vm_area() - * would have to initialise this each time prior to calling vm_region_alloc(). - */ -struct arm_vm_region { - struct list_head vm_list; - unsigned long vm_start; - unsigned long vm_end; - struct page *vm_pages; - int vm_active; -}; +#ifdef CONFIG_DMA_API_DEBUG + u64 limit = (mask + 1) & ~mask; + if (limit && size >= limit) { + dev_warn(dev, "coherent allocation too big (requested %#x mask %#llx)\n", + size, mask); + return NULL; + } +#endif -static struct arm_vm_region consistent_head = { - .vm_list = LIST_HEAD_INIT(consistent_head.vm_list), - .vm_start = CONSISTENT_BASE, - .vm_end = CONSISTENT_END, -}; + if (!mask) + return NULL; -static struct arm_vm_region * -arm_vm_region_alloc(struct arm_vm_region *head, size_t size, gfp_t gfp) -{ - unsigned long addr = head->vm_start, end = head->vm_end - size; - unsigned long flags; - struct arm_vm_region *c, *new; - - new = kmalloc(sizeof(struct arm_vm_region), gfp); - if (!new) - goto out; - - spin_lock_irqsave(&consistent_lock, flags); - - list_for_each_entry(c, &head->vm_list, vm_list) { - if ((addr + size) < addr) - goto nospc; - if ((addr + size) <= c->vm_start) - goto found; - addr = c->vm_end; - if (addr > end) - goto nospc; - } + if (mask < 0xffffffffULL) + gfp |= GFP_DMA; + + page = alloc_pages(gfp, order); + if (!page) + return NULL; - found: /* - * Insert this entry _before_ the one we found. + * Now split the huge page and free the excess pages */ - list_add_tail(&new->vm_list, &c->vm_list); - new->vm_start = addr; - new->vm_end = addr + size; - new->vm_active = 1; - - spin_unlock_irqrestore(&consistent_lock, flags); - return new; - - nospc: - spin_unlock_irqrestore(&consistent_lock, flags); - kfree(new); - out: - return NULL; + split_page(page, order); + for (p = page + (size >> PAGE_SHIFT), e = page + (1 << order); p < e; p++) + __free_page(p); + + /* + * Ensure that the allocated pages are zeroed, and that any data + * lurking in the kernel direct-mapped region is invalidated. + */ + ptr = page_address(page); + memset(ptr, 0, size); + dmac_flush_range(ptr, ptr + size); + outer_flush_range(__pa(ptr), __pa(ptr) + size); + + return page; } -static struct arm_vm_region *arm_vm_region_find(struct arm_vm_region *head, unsigned long addr) +/* + * Free a DMA buffer. 'size' must be page aligned. + */ +static void __dma_free_buffer(struct page *page, size_t size) { - struct arm_vm_region *c; - - list_for_each_entry(c, &head->vm_list, vm_list) { - if (c->vm_active && c->vm_start == addr) - goto out; + struct page *e = page + (size >> PAGE_SHIFT); + + while (page < e) { + __free_page(page); + page++; } - c = NULL; - out: - return c; } +#ifdef CONFIG_MMU +/* + * These are the page tables (2MB each) covering uncached, DMA consistent allocations + */ +static pte_t *consistent_pte[NUM_CONSISTENT_PTES]; + +#include "vmregion.h" + +static struct arm_vmregion_head consistent_head = { + .vm_lock = __SPIN_LOCK_UNLOCKED(&consistent_head.vm_lock), + .vm_list = LIST_HEAD_INIT(consistent_head.vm_list), + .vm_start = CONSISTENT_BASE, + .vm_end = CONSISTENT_END, +}; + #ifdef CONFIG_HUGETLB_PAGE #error ARM Coherent DMA allocator does not (yet) support huge TLB #endif -static void * -__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, - pgprot_t prot) +/* + * Initialise the consistent memory allocation. + */ +static int __init consistent_init(void) { - struct page *page; - struct arm_vm_region *c; - unsigned long order; - u64 mask = get_coherent_dma_mask(dev); - u64 limit; + int ret = 0; + pgd_t *pgd; + pmd_t *pmd; + pte_t *pte; + int i = 0; + u32 base = CONSISTENT_BASE; - if (!consistent_pte[0]) { - printk(KERN_ERR "%s: not initialised\n", __func__); - dump_stack(); - return NULL; - } + do { + pgd = pgd_offset(&init_mm, base); + pmd = pmd_alloc(&init_mm, pgd, base); + if (!pmd) { + printk(KERN_ERR "%s: no pmd tables\n", __func__); + ret = -ENOMEM; + break; + } + WARN_ON(!pmd_none(*pmd)); - if (!mask) - goto no_page; + pte = pte_alloc_kernel(pmd, base); + if (!pte) { + printk(KERN_ERR "%s: no pte tables\n", __func__); + ret = -ENOMEM; + break; + } - /* - * Sanity check the allocation size. - */ - size = PAGE_ALIGN(size); - limit = (mask + 1) & ~mask; - if ((limit && size >= limit) || - size >= (CONSISTENT_END - CONSISTENT_BASE)) { - printk(KERN_WARNING "coherent allocation too big " - "(requested %#x mask %#llx)\n", size, mask); - goto no_page; - } + consistent_pte[i++] = pte; + base += (1 << PGDIR_SHIFT); + } while (base < CONSISTENT_END); - order = get_order(size); + return ret; +} - if (mask < 0xffffffffULL) - gfp |= GFP_DMA; +core_initcall(consistent_init); - page = alloc_pages(gfp, order); - if (!page) - goto no_page; +static void * +__dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot) +{ + struct arm_vmregion *c; - /* - * Invalidate any data that might be lurking in the - * kernel direct-mapped region for device DMA. - */ - { - void *ptr = page_address(page); - memset(ptr, 0, size); - dmac_flush_range(ptr, ptr + size); - outer_flush_range(__pa(ptr), __pa(ptr) + size); + if (!consistent_pte[0]) { + printk(KERN_ERR "%s: not initialised\n", __func__); + dump_stack(); + return NULL; } /* * Allocate a virtual address in the consistent mapping region. */ - c = arm_vm_region_alloc(&consistent_head, size, + c = arm_vmregion_alloc(&consistent_head, size, gfp & ~(__GFP_DMA | __GFP_HIGHMEM)); if (c) { pte_t *pte; - struct page *end = page + (1 << order); int idx = CONSISTENT_PTE_INDEX(c->vm_start); u32 off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1); pte = consistent_pte[idx] + off; c->vm_pages = page; - split_page(page, order); - - /* - * Set the "dma handle" - */ - *handle = page_to_dma(dev, page); - do { BUG_ON(!pte_none(*pte)); - /* - * x86 does not mark the pages reserved... - */ - SetPageReserved(page); set_pte_ext(pte, mk_pte(page, prot), 0); page++; pte++; @@ -261,48 +219,90 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, } } while (size -= PAGE_SIZE); - /* - * Free the otherwise unused pages. - */ - while (page < end) { - __free_page(page); - page++; - } - return (void *)c->vm_start; } - - if (page) - __free_pages(page, order); - no_page: - *handle = ~0; return NULL; } + +static void __dma_free_remap(void *cpu_addr, size_t size) +{ + struct arm_vmregion *c; + unsigned long addr; + pte_t *ptep; + int idx; + u32 off; + + c = arm_vmregion_find_remove(&consistent_head, (unsigned long)cpu_addr); + if (!c) { + printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n", + __func__, cpu_addr); + dump_stack(); + return; + } + + if ((c->vm_end - c->vm_start) != size) { + printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n", + __func__, c->vm_end - c->vm_start, size); + dump_stack(); + size = c->vm_end - c->vm_start; + } + + idx = CONSISTENT_PTE_INDEX(c->vm_start); + off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1); + ptep = consistent_pte[idx] + off; + addr = c->vm_start; + do { + pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep); + + ptep++; + addr += PAGE_SIZE; + off++; + if (off >= PTRS_PER_PTE) { + off = 0; + ptep = consistent_pte[++idx]; + } + + if (pte_none(pte) || !pte_present(pte)) + printk(KERN_CRIT "%s: bad page in kernel page table\n", + __func__); + } while (size -= PAGE_SIZE); + + flush_tlb_kernel_range(c->vm_start, c->vm_end); + + arm_vmregion_free(&consistent_head, c); +} + #else /* !CONFIG_MMU */ + +#define __dma_alloc_remap(page, size, gfp, prot) page_address(page) +#define __dma_free_remap(addr, size) do { } while (0) + +#endif /* CONFIG_MMU */ + static void * __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, pgprot_t prot) { - void *virt; - u64 mask = get_coherent_dma_mask(dev); + struct page *page; + void *addr; - if (!mask) - goto error; + *handle = ~0; + size = PAGE_ALIGN(size); - if (mask < 0xffffffffULL) - gfp |= GFP_DMA; - virt = kmalloc(size, gfp); - if (!virt) - goto error; + page = __dma_alloc_buffer(dev, size, gfp); + if (!page) + return NULL; - *handle = virt_to_dma(dev, virt); - return virt; + if (!arch_is_coherent()) + addr = __dma_alloc_remap(page, size, gfp, prot); + else + addr = page_address(page); -error: - *handle = ~0; - return NULL; + if (addr) + *handle = page_to_dma(dev, page); + + return addr; } -#endif /* CONFIG_MMU */ /* * Allocate DMA-coherent memory space and return both the kernel remapped @@ -316,19 +316,8 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gf if (dma_alloc_from_coherent(dev, size, handle, &memory)) return memory; - if (arch_is_coherent()) { - void *virt; - - virt = kmalloc(size, gfp); - if (!virt) - return NULL; - *handle = virt_to_dma(dev, virt); - - return virt; - } - return __dma_alloc(dev, size, handle, gfp, - pgprot_noncached(pgprot_kernel)); + pgprot_dmacoherent(pgprot_kernel)); } EXPORT_SYMBOL(dma_alloc_coherent); @@ -349,15 +338,12 @@ static int dma_mmap(struct device *dev, struct vm_area_struct *vma, { int ret = -ENXIO; #ifdef CONFIG_MMU - unsigned long flags, user_size, kern_size; - struct arm_vm_region *c; + unsigned long user_size, kern_size; + struct arm_vmregion *c; user_size = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; - spin_lock_irqsave(&consistent_lock, flags); - c = arm_vm_region_find(&consistent_head, (unsigned long)cpu_addr); - spin_unlock_irqrestore(&consistent_lock, flags); - + c = arm_vmregion_find(&consistent_head, (unsigned long)cpu_addr); if (c) { unsigned long off = vma->vm_pgoff; @@ -379,7 +365,7 @@ static int dma_mmap(struct device *dev, struct vm_area_struct *vma, int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma, void *cpu_addr, dma_addr_t dma_addr, size_t size) { - vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + vma->vm_page_prot = pgprot_dmacoherent(vma->vm_page_prot); return dma_mmap(dev, vma, cpu_addr, dma_addr, size); } EXPORT_SYMBOL(dma_mmap_coherent); @@ -396,144 +382,23 @@ EXPORT_SYMBOL(dma_mmap_writecombine); * free a page as defined by the above mapping. * Must not be called with IRQs disabled. */ -#ifdef CONFIG_MMU void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle) { - struct arm_vm_region *c; - unsigned long flags, addr; - pte_t *ptep; - int idx; - u32 off; - WARN_ON(irqs_disabled()); if (dma_release_from_coherent(dev, get_order(size), cpu_addr)) return; - if (arch_is_coherent()) { - kfree(cpu_addr); - return; - } - size = PAGE_ALIGN(size); - spin_lock_irqsave(&consistent_lock, flags); - c = arm_vm_region_find(&consistent_head, (unsigned long)cpu_addr); - if (!c) - goto no_area; - - c->vm_active = 0; - spin_unlock_irqrestore(&consistent_lock, flags); - - if ((c->vm_end - c->vm_start) != size) { - printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n", - __func__, c->vm_end - c->vm_start, size); - dump_stack(); - size = c->vm_end - c->vm_start; - } - - idx = CONSISTENT_PTE_INDEX(c->vm_start); - off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1); - ptep = consistent_pte[idx] + off; - addr = c->vm_start; - do { - pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep); - unsigned long pfn; - - ptep++; - addr += PAGE_SIZE; - off++; - if (off >= PTRS_PER_PTE) { - off = 0; - ptep = consistent_pte[++idx]; - } - - if (!pte_none(pte) && pte_present(pte)) { - pfn = pte_pfn(pte); - - if (pfn_valid(pfn)) { - struct page *page = pfn_to_page(pfn); - - /* - * x86 does not mark the pages reserved... - */ - ClearPageReserved(page); - - __free_page(page); - continue; - } - } - - printk(KERN_CRIT "%s: bad page in kernel page table\n", - __func__); - } while (size -= PAGE_SIZE); - - flush_tlb_kernel_range(c->vm_start, c->vm_end); - - spin_lock_irqsave(&consistent_lock, flags); - list_del(&c->vm_list); - spin_unlock_irqrestore(&consistent_lock, flags); - - kfree(c); - return; + if (!arch_is_coherent()) + __dma_free_remap(cpu_addr, size); - no_area: - spin_unlock_irqrestore(&consistent_lock, flags); - printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n", - __func__, cpu_addr); - dump_stack(); + __dma_free_buffer(dma_to_page(dev, handle), size); } -#else /* !CONFIG_MMU */ -void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle) -{ - if (dma_release_from_coherent(dev, get_order(size), cpu_addr)) - return; - kfree(cpu_addr); -} -#endif /* CONFIG_MMU */ EXPORT_SYMBOL(dma_free_coherent); /* - * Initialise the consistent memory allocation. - */ -static int __init consistent_init(void) -{ - int ret = 0; -#ifdef CONFIG_MMU - pgd_t *pgd; - pmd_t *pmd; - pte_t *pte; - int i = 0; - u32 base = CONSISTENT_BASE; - - do { - pgd = pgd_offset(&init_mm, base); - pmd = pmd_alloc(&init_mm, pgd, base); - if (!pmd) { - printk(KERN_ERR "%s: no pmd tables\n", __func__); - ret = -ENOMEM; - break; - } - WARN_ON(!pmd_none(*pmd)); - - pte = pte_alloc_kernel(pmd, base); - if (!pte) { - printk(KERN_ERR "%s: no pte tables\n", __func__); - ret = -ENOMEM; - break; - } - - consistent_pte[i++] = pte; - base += (1 << PGDIR_SHIFT); - } while (base < CONSISTENT_END); -#endif /* !CONFIG_MMU */ - - return ret; -} - -core_initcall(consistent_init); - -/* * Make an area consistent for devices. * Note: Drivers should NOT use this function directly, as it will break * platforms with CONFIG_DMABOUNCE. diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c index d0d17b6a370..72960229195 100644 --- a/arch/arm/mm/fault-armv.c +++ b/arch/arm/mm/fault-armv.c @@ -23,6 +23,8 @@ #include <asm/pgtable.h> #include <asm/tlbflush.h> +#include "mm.h" + static unsigned long shared_pte_mask = L_PTE_MT_BUFFERABLE; /* @@ -151,7 +153,14 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte) if (!pfn_valid(pfn)) return; + /* + * The zero page is never written to, so never has any dirty + * cache lines, and therefore never needs to be flushed. + */ page = pfn_to_page(pfn); + if (page == ZERO_PAGE(0)) + return; + mapping = page_mapping(page); #ifndef CONFIG_SMP if (test_and_clear_bit(PG_dcache_dirty, &page->flags)) diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 7f294f307c8..329594e760c 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -35,14 +35,12 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr) : : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero) : "cc"); - __flush_icache_all(); } void flush_cache_mm(struct mm_struct *mm) { if (cache_is_vivt()) { - if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) - __cpuc_flush_user_all(); + vivt_flush_cache_mm(mm); return; } @@ -52,16 +50,13 @@ void flush_cache_mm(struct mm_struct *mm) : : "r" (0) : "cc"); - __flush_icache_all(); } } void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { if (cache_is_vivt()) { - if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) - __cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end), - vma->vm_flags); + vivt_flush_cache_range(vma, start, end); return; } @@ -71,22 +66,26 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned : : "r" (0) : "cc"); - __flush_icache_all(); } + + if (vma->vm_flags & VM_EXEC) + __flush_icache_all(); } void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn) { if (cache_is_vivt()) { - if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) { - unsigned long addr = user_addr & PAGE_MASK; - __cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags); - } + vivt_flush_cache_page(vma, user_addr, pfn); return; } - if (cache_is_vipt_aliasing()) + if (cache_is_vipt_aliasing()) { flush_pfn_alias(pfn, user_addr); + __flush_icache_all(); + } + + if (vma->vm_flags & VM_EXEC && icache_is_vivt_asid_tagged()) + __flush_icache_all(); } void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, @@ -94,15 +93,13 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, unsigned long len, int write) { if (cache_is_vivt()) { - if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) { - unsigned long addr = (unsigned long)kaddr; - __cpuc_coherent_kern_range(addr, addr + len); - } + vivt_flush_ptrace_access(vma, page, uaddr, kaddr, len, write); return; } if (cache_is_vipt_aliasing()) { flush_pfn_alias(page_to_pfn(page), uaddr); + __flush_icache_all(); return; } @@ -120,6 +117,8 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, void __flush_dcache_page(struct address_space *mapping, struct page *page) { + void *addr = page_address(page); + /* * Writeback any data associated with the kernel mapping of this * page. This ensures that data in the physical page is mutually @@ -130,9 +129,9 @@ void __flush_dcache_page(struct address_space *mapping, struct page *page) * kmap_atomic() doesn't set the page virtual address, and * kunmap_atomic() takes care of cache flushing already. */ - if (page_address(page)) + if (addr) #endif - __cpuc_flush_dcache_page(page_address(page)); + __cpuc_flush_dcache_page(addr); /* * If this is a page cache page, and we have an aliasing VIPT cache, @@ -196,7 +195,16 @@ static void __flush_dcache_aliases(struct address_space *mapping, struct page *p */ void flush_dcache_page(struct page *page) { - struct address_space *mapping = page_mapping(page); + struct address_space *mapping; + + /* + * The zero page is never written to, so never has any dirty + * cache lines, and therefore never needs to be flushed. + */ + if (page == ZERO_PAGE(0)) + return; + + mapping = page_mapping(page); #ifndef CONFIG_SMP if (!PageHighMem(page) && mapping && !mapping_mapped(mapping)) @@ -242,6 +250,7 @@ void __flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned l * userspace address only. */ flush_pfn_alias(pfn, vmaddr); + __flush_icache_all(); } /* diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index c4f6f05198e..a888363398f 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -24,6 +24,8 @@ struct mem_type { const struct mem_type *get_mem_type(unsigned int type); +extern void __flush_dcache_page(struct address_space *mapping, struct page *page); + #endif struct map_desc; diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index ea67be0223a..2427cdcd909 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -1036,7 +1036,7 @@ void __init paging_init(struct machine_desc *mdesc) */ zero_page = alloc_bootmem_low_pages(PAGE_SIZE); empty_zero_page = virt_to_page(zero_page); - flush_dcache_page(empty_zero_page); + __flush_dcache_page(NULL, empty_zero_page); } /* diff --git a/arch/arm/mm/vmregion.c b/arch/arm/mm/vmregion.c new file mode 100644 index 00000000000..19e09bdb1b8 --- /dev/null +++ b/arch/arm/mm/vmregion.c @@ -0,0 +1,131 @@ +#include <linux/spinlock.h> +#include <linux/list.h> +#include <linux/slab.h> + +#include "vmregion.h" + +/* + * VM region handling support. + * + * This should become something generic, handling VM region allocations for + * vmalloc and similar (ioremap, module space, etc). + * + * I envisage vmalloc()'s supporting vm_struct becoming: + * + * struct vm_struct { + * struct vmregion region; + * unsigned long flags; + * struct page **pages; + * unsigned int nr_pages; + * unsigned long phys_addr; + * }; + * + * get_vm_area() would then call vmregion_alloc with an appropriate + * struct vmregion head (eg): + * + * struct vmregion vmalloc_head = { + * .vm_list = LIST_HEAD_INIT(vmalloc_head.vm_list), + * .vm_start = VMALLOC_START, + * .vm_end = VMALLOC_END, + * }; + * + * However, vmalloc_head.vm_start is variable (typically, it is dependent on + * the amount of RAM found at boot time.) I would imagine that get_vm_area() + * would have to initialise this each time prior to calling vmregion_alloc(). + */ + +struct arm_vmregion * +arm_vmregion_alloc(struct arm_vmregion_head *head, size_t size, gfp_t gfp) +{ + unsigned long addr = head->vm_start, end = head->vm_end - size; + unsigned long flags; + struct arm_vmregion *c, *new; + + if (head->vm_end - head->vm_start < size) { + printk(KERN_WARNING "%s: allocation too big (requested %#x)\n", + __func__, size); + goto out; + } + + new = kmalloc(sizeof(struct arm_vmregion), gfp); + if (!new) + goto out; + + spin_lock_irqsave(&head->vm_lock, flags); + + list_for_each_entry(c, &head->vm_list, vm_list) { + if ((addr + size) < addr) + goto nospc; + if ((addr + size) <= c->vm_start) + goto found; + addr = c->vm_end; + if (addr > end) + goto nospc; + } + + found: + /* + * Insert this entry _before_ the one we found. + */ + list_add_tail(&new->vm_list, &c->vm_list); + new->vm_start = addr; + new->vm_end = addr + size; + new->vm_active = 1; + + spin_unlock_irqrestore(&head->vm_lock, flags); + return new; + + nospc: + spin_unlock_irqrestore(&head->vm_lock, flags); + kfree(new); + out: + return NULL; +} + +static struct arm_vmregion *__arm_vmregion_find(struct arm_vmregion_head *head, unsigned long addr) +{ + struct arm_vmregion *c; + + list_for_each_entry(c, &head->vm_list, vm_list) { + if (c->vm_active && c->vm_start == addr) + goto out; + } + c = NULL; + out: + return c; +} + +struct arm_vmregion *arm_vmregion_find(struct arm_vmregion_head *head, unsigned long addr) +{ + struct arm_vmregion *c; + unsigned long flags; + + spin_lock_irqsave(&head->vm_lock, flags); + c = __arm_vmregion_find(head, addr); + spin_unlock_irqrestore(&head->vm_lock, flags); + return c; +} + +struct arm_vmregion *arm_vmregion_find_remove(struct arm_vmregion_head *head, unsigned long addr) +{ + struct arm_vmregion *c; + unsigned long flags; + + spin_lock_irqsave(&head->vm_lock, flags); + c = __arm_vmregion_find(head, addr); + if (c) + c->vm_active = 0; + spin_unlock_irqrestore(&head->vm_lock, flags); + return c; +} + +void arm_vmregion_free(struct arm_vmregion_head *head, struct arm_vmregion *c) +{ + unsigned long flags; + + spin_lock_irqsave(&head->vm_lock, flags); + list_del(&c->vm_list); + spin_unlock_irqrestore(&head->vm_lock, flags); + + kfree(c); +} diff --git a/arch/arm/mm/vmregion.h b/arch/arm/mm/vmregion.h new file mode 100644 index 00000000000..6b2cdbdf3a8 --- /dev/null +++ b/arch/arm/mm/vmregion.h @@ -0,0 +1,29 @@ +#ifndef VMREGION_H +#define VMREGION_H + +#include <linux/spinlock.h> +#include <linux/list.h> + +struct page; + +struct arm_vmregion_head { + spinlock_t vm_lock; + struct list_head vm_list; + unsigned long vm_start; + unsigned long vm_end; +}; + +struct arm_vmregion { + struct list_head vm_list; + unsigned long vm_start; + unsigned long vm_end; + struct page *vm_pages; + int vm_active; +}; + +struct arm_vmregion *arm_vmregion_alloc(struct arm_vmregion_head *, size_t, gfp_t); +struct arm_vmregion *arm_vmregion_find(struct arm_vmregion_head *, unsigned long); +struct arm_vmregion *arm_vmregion_find_remove(struct arm_vmregion_head *, unsigned long); +void arm_vmregion_free(struct arm_vmregion_head *, struct arm_vmregion *); + +#endif diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig new file mode 100644 index 00000000000..159daf583f8 --- /dev/null +++ b/arch/arm/plat-nomadik/Kconfig @@ -0,0 +1,22 @@ +# We keep common IP's here for Nomadik and other similar +# familiy of processors from ST-Ericsson. At the moment we have +# just MTU, others to follow soon. + +config PLAT_NOMADIK + bool + depends on ARCH_NOMADIK || ARCH_U8500 + default y + help + Common platform code for Nomadik and other ST-Ericsson + platforms. + +if PLAT_NOMADIK + +config HAS_MTU + bool + help + Support for Multi Timer Unit. MTU provides access + to multiple interrupt generating programmable + 32-bit free running decrementing counters. + +endif diff --git a/arch/arm/plat-nomadik/Makefile b/arch/arm/plat-nomadik/Makefile new file mode 100644 index 00000000000..37c7cdd0f8f --- /dev/null +++ b/arch/arm/plat-nomadik/Makefile @@ -0,0 +1,5 @@ +# arch/arm/plat-nomadik/Makefile +# Copyright 2009 ST-Ericsson +# Licensed under GPLv2 + +obj-$(CONFIG_HAS_MTU) += timer.o diff --git a/arch/arm/mach-nomadik/include/mach/mtu.h b/arch/arm/plat-nomadik/include/plat/mtu.h index 76da7f08533..42c907258b1 100644 --- a/arch/arm/mach-nomadik/include/mach/mtu.h +++ b/arch/arm/plat-nomadik/include/plat/mtu.h @@ -1,5 +1,8 @@ -#ifndef __ASM_ARCH_MTU_H -#define __ASM_ARCH_MTU_H +#ifndef __PLAT_MTU_H +#define __PLAT_MTU_H + +/* should be set by the platform code */ +extern void __iomem *mtu_base; /* * The MTU device hosts four different counters, with 4 set of @@ -41,5 +44,5 @@ #define MTU_PCELL2 0xff8 #define MTU_PCELL3 0xffC -#endif /* __ASM_ARCH_MTU_H */ +#endif /* __PLAT_MTU_H */ diff --git a/arch/arm/mach-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c index d1738e7061d..62f18ad43a2 100644 --- a/arch/arm/mach-nomadik/timer.c +++ b/arch/arm/plat-nomadik/timer.c @@ -15,19 +15,14 @@ #include <linux/clockchips.h> #include <linux/jiffies.h> #include <asm/mach/time.h> -#include <mach/mtu.h> -#define TIMER_CTRL 0x80 /* No divisor */ -#define TIMER_PERIODIC 0x40 -#define TIMER_SZ32BIT 0x02 - -/* Initial value for SRC control register: all timers use MXTAL/8 source */ -#define SRC_CR_INIT_MASK 0x00007fff -#define SRC_CR_INIT_VAL 0x2aaa8000 +#include <plat/mtu.h> static u32 nmdk_count; /* accumulated count */ static u32 nmdk_cycle; /* write-once */ -static __iomem void *mtu_base; + +/* setup by the platform code */ +void __iomem *mtu_base; /* * clocksource: the MTU device is a decrementing counters, so we negate @@ -93,7 +88,7 @@ static struct clock_event_device nmdk_clkevt = { static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id) { /* ack: "interrupt clear register" */ - writel( 1 << 0, mtu_base + MTU_ICR); + writel(1 << 0, mtu_base + MTU_ICR); /* we can't count lost ticks, unfortunately */ nmdk_count += nmdk_cycle; @@ -125,24 +120,14 @@ static void nmdk_timer_reset(void) writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0)); } -static void __init nmdk_timer_init(void) +void __init nmdk_timer_init(void) { - u32 src_cr; unsigned long rate; int bits; rate = CLOCK_TICK_RATE; /* 2.4MHz */ nmdk_cycle = (rate + HZ/2) / HZ; - /* Configure timer sources in "system reset controller" ctrl reg */ - src_cr = readl(io_p2v(NOMADIK_SRC_BASE)); - src_cr &= SRC_CR_INIT_MASK; - src_cr |= SRC_CR_INIT_VAL; - writel(src_cr, io_p2v(NOMADIK_SRC_BASE)); - - /* Save global pointer to mtu, used by functions above */ - mtu_base = io_p2v(NOMADIK_MTU0_BASE); - /* Init the timer and register clocksource */ nmdk_timer_reset(); @@ -150,7 +135,9 @@ static void __init nmdk_timer_init(void) bits = 8*sizeof(nmdk_count); nmdk_clksrc.mask = CLOCKSOURCE_MASK(bits); - clocksource_register(&nmdk_clksrc); + if (clocksource_register(&nmdk_clksrc)) + printk(KERN_ERR "timer: failed to initialize clock " + "source %s\n", nmdk_clksrc.name); /* Register irq and clockevents */ setup_irq(IRQ_MTU0, &nmdk_timer_irq); @@ -158,7 +145,3 @@ static void __init nmdk_timer_init(void) nmdk_clkevt.cpumask = cpumask_of(0); clockevents_register_device(&nmdk_clkevt); } - -struct sys_timer nomadik_timer = { - .init = nmdk_timer_init, -}; diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h index 9ad41dc484c..3325f7b49ea 100644 --- a/arch/arm/plat-omap/include/mach/memory.h +++ b/arch/arm/plat-omap/include/mach/memory.h @@ -68,6 +68,13 @@ __dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \ __dma; }) +#define __arch_dma_to_page(dev, addr) \ + ({ dma_addr_t __dma = addr; \ + if (is_lbus_device(dev)) \ + __dma += PHYS_OFFSET - OMAP1510_LB_OFFSET; \ + phys_to_page(__dma); \ + }) + #define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \ lbus_to_virt(addr) : \ __phys_to_virt(addr)); }) diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 94be7bb6cb9..07b976da617 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Fri Sep 18 21:42:00 2009 +# Last update: Wed Nov 25 22:14:58 2009 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -928,7 +928,7 @@ palmt5 MACH_PALMT5 PALMT5 917 palmtc MACH_PALMTC PALMTC 918 omap_apollon MACH_OMAP_APOLLON OMAP_APOLLON 919 mxc30030evb MACH_MXC30030EVB MXC30030EVB 920 -rea_2d MACH_REA_2D REA_2D 921 +rea_cpu2 MACH_REA_2D REA_2D 921 eti3e524 MACH_TI3E524 TI3E524 922 ateb9200 MACH_ATEB9200 ATEB9200 923 auckland MACH_AUCKLAND AUCKLAND 924 @@ -2421,3 +2421,118 @@ liberty MACH_LIBERTY LIBERTY 2434 mh355 MACH_MH355 MH355 2435 pc7802 MACH_PC7802 PC7802 2436 gnet_sgc MACH_GNET_SGC GNET_SGC 2437 +einstein15 MACH_EINSTEIN15 EINSTEIN15 2438 +cmpd MACH_CMPD CMPD 2439 +davinci_hase1 MACH_DAVINCI_HASE1 DAVINCI_HASE1 2440 +lgeincitephone MACH_LGEINCITEPHONE LGEINCITEPHONE 2441 +ea313x MACH_EA313X EA313X 2442 +fwbd_39064 MACH_FWBD_39064 FWBD_39064 2443 +fwbd_390128 MACH_FWBD_390128 FWBD_390128 2444 +pelco_moe MACH_PELCO_MOE PELCO_MOE 2445 +minimix27 MACH_MINIMIX27 MINIMIX27 2446 +omap3_thunder MACH_OMAP3_THUNDER OMAP3_THUNDER 2447 +passionc MACH_PASSIONC PASSIONC 2448 +mx27amata MACH_MX27AMATA MX27AMATA 2449 +bgat1 MACH_BGAT1 BGAT1 2450 +buzz MACH_BUZZ BUZZ 2451 +mb9g20 MACH_MB9G20 MB9G20 2452 +yushan MACH_YUSHAN YUSHAN 2453 +lizard MACH_LIZARD LIZARD 2454 +omap3polycom MACH_OMAP3POLYCOM OMAP3POLYCOM 2455 +smdkv210 MACH_SMDKV210 SMDKV210 2456 +bravo MACH_BRAVO BRAVO 2457 +siogentoo1 MACH_SIOGENTOO1 SIOGENTOO1 2458 +siogentoo2 MACH_SIOGENTOO2 SIOGENTOO2 2459 +sm3k MACH_SM3K SM3K 2460 +acer_tempo_f900 MACH_ACER_TEMPO_F900 ACER_TEMPO_F900 2461 +sst61vc010_dev MACH_SST61VC010_DEV SST61VC010_DEV 2462 +glittertind MACH_GLITTERTIND GLITTERTIND 2463 +omap_zoom3 MACH_OMAP_ZOOM3 OMAP_ZOOM3 2464 +omap_3630sdp MACH_OMAP_3630SDP OMAP_3630SDP 2465 +cybook2440 MACH_CYBOOK2440 CYBOOK2440 2466 +torino_s MACH_TORINO_S TORINO_S 2467 +havana MACH_HAVANA HAVANA 2468 +beaumont_11 MACH_BEAUMONT_11 BEAUMONT_11 2469 +vanguard MACH_VANGUARD VANGUARD 2470 +s5pc110_draco MACH_S5PC110_DRACO S5PC110_DRACO 2471 +cartesio_two MACH_CARTESIO_TWO CARTESIO_TWO 2472 +aster MACH_ASTER ASTER 2473 +voguesv210 MACH_VOGUESV210 VOGUESV210 2474 +acm500x MACH_ACM500X ACM500X 2475 +km9260 MACH_KM9260 KM9260 2476 +nideflexg1 MACH_NIDEFLEXG1 NIDEFLEXG1 2477 +ctera_plug_io MACH_CTERA_PLUG_IO CTERA_PLUG_IO 2478 +smartq7 MACH_SMARTQ7 SMARTQ7 2479 +at91sam9g10ek2 MACH_AT91SAM9G10EK2 AT91SAM9G10EK2 2480 +asusp527 MACH_ASUSP527 ASUSP527 2481 +at91sam9g20mpm2 MACH_AT91SAM9G20MPM2 AT91SAM9G20MPM2 2482 +topasa900 MACH_TOPASA900 TOPASA900 2483 +electrum_100 MACH_ELECTRUM_100 ELECTRUM_100 2484 +mx51grb MACH_MX51GRB MX51GRB 2485 +xea300 MACH_XEA300 XEA300 2486 +htcstartrek MACH_HTCSTARTREK HTCSTARTREK 2487 +lima MACH_LIMA LIMA 2488 +csb740 MACH_CSB740 CSB740 2489 +usb_s8815 MACH_USB_S8815 USB_S8815 2490 +watson_efm_plugin MACH_WATSON_EFM_PLUGIN WATSON_EFM_PLUGIN 2491 +milkyway MACH_MILKYWAY MILKYWAY 2492 +g4evm MACH_G4EVM G4EVM 2493 +picomod6 MACH_PICOMOD6 PICOMOD6 2494 +omapl138_hawkboard MACH_OMAPL138_HAWKBOARD OMAPL138_HAWKBOARD 2495 +ip6000 MACH_IP6000 IP6000 2496 +ip6010 MACH_IP6010 IP6010 2497 +utm400 MACH_UTM400 UTM400 2498 +omap3_zybex MACH_OMAP3_ZYBEX OMAP3_ZYBEX 2499 +wireless_space MACH_WIRELESS_SPACE WIRELESS_SPACE 2500 +sx560 MACH_SX560 SX560 2501 +ts41x MACH_TS41X TS41X 2502 +elphel10373 MACH_ELPHEL10373 ELPHEL10373 2503 +rhobot MACH_RHOBOT RHOBOT 2504 +mx51_refresh MACH_MX51_REFRESH MX51_REFRESH 2505 +ls9260 MACH_LS9260 LS9260 2506 +shank MACH_SHANK SHANK 2507 +qsd8x50_st1 MACH_QSD8X50_ST1 QSD8X50_ST1 2508 +at91sam9m10ekes MACH_AT91SAM9M10EKES AT91SAM9M10EKES 2509 +hiram MACH_HIRAM HIRAM 2510 +phy3250 MACH_PHY3250 PHY3250 2511 +ea3250 MACH_EA3250 EA3250 2512 +fdi3250 MACH_FDI3250 FDI3250 2513 +whitestone MACH_WHITESTONE WHITESTONE 2514 +at91sam9263nit MACH_AT91SAM9263NIT AT91SAM9263NIT 2515 +ccmx51 MACH_CCMX51 CCMX51 2516 +ccmx51js MACH_CCMX51JS CCMX51JS 2517 +ccwmx51 MACH_CCWMX51 CCWMX51 2518 +ccwmx51js MACH_CCWMX51JS CCWMX51JS 2519 +mini6410 MACH_MINI6410 MINI6410 2520 +tiny6410 MACH_TINY6410 TINY6410 2521 +nano6410 MACH_NANO6410 NANO6410 2522 +at572d940hfnldb MACH_AT572D940HFNLDB AT572D940HFNLDB 2523 +htcleo MACH_HTCLEO HTCLEO 2524 +avp13 MACH_AVP13 AVP13 2525 +xxsvideod MACH_XXSVIDEOD XXSVIDEOD 2526 +vpnext MACH_VPNEXT VPNEXT 2527 +swarco_itc3 MACH_SWARCO_ITC3 SWARCO_ITC3 2528 +tx51 MACH_TX51 TX51 2529 +dolby_cat1021 MACH_DOLBY_CAT1021 DOLBY_CAT1021 2530 +mx28evk MACH_MX28EVK MX28EVK 2531 +phoenix260 MACH_PHOENIX260 PHOENIX260 2532 +uvaca_stork MACH_UVACA_STORK UVACA_STORK 2533 +smartq5 MACH_SMARTQ5 SMARTQ5 2534 +all3078 MACH_ALL3078 ALL3078 2535 +ctera_2bay_ds MACH_CTERA_2BAY_DS CTERA_2BAY_DS 2536 +siogentoo3 MACH_SIOGENTOO3 SIOGENTOO3 2537 +epb5000 MACH_EPB5000 EPB5000 2538 +hy9263 MACH_HY9263 HY9263 2539 +acer_tempo_m900 MACH_ACER_TEMPO_M900 ACER_TEMPO_M900 2540 +acer_tempo_dx650 MACH_ACER_TEMPO_DX900 ACER_TEMPO_DX900 2541 +acer_tempo_x960 MACH_ACER_TEMPO_X960 ACER_TEMPO_X960 2542 +acer_eten_v900 MACH_ACER_ETEN_V900 ACER_ETEN_V900 2543 +acer_eten_x900 MACH_ACER_ETEN_X900 ACER_ETEN_X900 2544 +bonnell MACH_BONNELL BONNELL 2545 +oht_mx27 MACH_OHT_MX27 OHT_MX27 2546 +htcquartz MACH_HTCQUARTZ HTCQUARTZ 2547 +davinci_dm6467tevm MACH_DAVINCI_DM6467TEVM DAVINCI_DM6467TEVM 2548 +c3ax03 MACH_C3AX03 C3AX03 2549 +mxt_td60 MACH_MXT_TD60 MXT_TD60 2550 +esyx MACH_ESYX ESYX 2551 +bulldog MACH_BULLDOG BULLDOG 2553 diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 1f170216d2f..3946aff4f41 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -225,8 +225,13 @@ int blackfin_dma_suspend(void) void blackfin_dma_resume(void) { int i; - for (i = 0; i < MAX_DMA_SUSPEND_CHANNELS; ++i) - dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map; + + for (i = 0; i < MAX_DMA_CHANNELS; ++i) { + dma_ch[i].regs->cfg = 0; + + if (i < MAX_DMA_SUSPEND_CHANNELS) + dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map; + } } #endif diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c index f7b9cdce823..b52c1f8c4bc 100644 --- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c @@ -38,7 +38,7 @@ void __init generate_cplb_tables_cpu(unsigned int cpu) #ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE d_cache = CPLB_L1_CHBL; -#ifdef CONFIG_BFIN_EXTMEM_WRITETROUGH +#ifdef CONFIG_BFIN_EXTMEM_WRITETHROUGH d_cache |= CPLB_L1_AOW | CPLB_WT; #endif #endif diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index 430ae39456e..5cc7e2e9e41 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -151,7 +151,7 @@ void start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_ regs->pc = new_ip; if (current->mm) regs->p5 = current->mm->start_data; -#ifdef CONFIG_SMP +#ifndef CONFIG_SMP task_thread_info(current)->l1_task_info.stack_start = (void *)current->mm->context.stack_start; task_thread_info(current)->l1_task_info.lowest_sp = (void *)new_sp; diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c index 0982b5d5af1..56b0ba12175 100644 --- a/arch/blackfin/kernel/ptrace.c +++ b/arch/blackfin/kernel/ptrace.c @@ -315,7 +315,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) case BFIN_MEM_ACCESS_CORE: case BFIN_MEM_ACCESS_CORE_ONLY: copied = access_process_vm(child, addr, &data, - to_copy, 0); + to_copy, 1); if (copied) break; diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h index e9c65390edd..2829dd0400f 100644 --- a/arch/blackfin/mach-bf518/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h @@ -1,9 +1,13 @@ /* - * File: include/asm-blackfin/mach-bf518/anomaly.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * DO NOT EDIT THIS FILE + * This file is under version control at + * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/ + * and can be replaced with that version at any time + * DO NOT EDIT THIS FILE * - * Copyright (C) 2004-2009 Analog Devices Inc. - * Licensed under the GPL-2 or later. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the ADI BSD license. + * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: @@ -70,6 +74,10 @@ #define ANOMALY_05000461 (1) /* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */ #define ANOMALY_05000462 (1) +/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +#define ANOMALY_05000473 (1) +/* TESTSET Instruction Cannot Be Interrupted */ +#define ANOMALY_05000477 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -133,5 +141,7 @@ #define ANOMALY_05000450 (0) #define ANOMALY_05000465 (0) #define ANOMALY_05000467 (0) +#define ANOMALY_05000474 (0) +#define ANOMALY_05000475 (0) #endif diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h index 3f9052687fa..02040df8ec8 100644 --- a/arch/blackfin/mach-bf527/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h @@ -1,14 +1,18 @@ /* - * File: include/asm-blackfin/mach-bf527/anomaly.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * DO NOT EDIT THIS FILE + * This file is under version control at + * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/ + * and can be replaced with that version at any time + * DO NOT EDIT THIS FILE * - * Copyright (C) 2004-2009 Analog Devices Inc. - * Licensed under the GPL-2 or later. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the ADI BSD license. + * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: * - Revision D, 08/14/2009; ADSP-BF526 Blackfin Processor Anomaly List - * - Revision F, 03/03/2009; ADSP-BF527 Blackfin Processor Anomaly List + * - Revision G, 08/25/2009; ADSP-BF527 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -200,6 +204,10 @@ #define ANOMALY_05000467 (1) /* PLL Latches Incorrect Settings During Reset */ #define ANOMALY_05000469 (1) +/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +#define ANOMALY_05000473 (1) +/* TESTSET Instruction Cannot Be Interrupted */ +#define ANOMALY_05000477 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -250,5 +258,7 @@ #define ANOMALY_05000412 (0) #define ANOMALY_05000447 (0) #define ANOMALY_05000448 (0) +#define ANOMALY_05000474 (0) +#define ANOMALY_05000475 (0) #endif diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h index cd83db2fb1a..9b3f7a27714 100644 --- a/arch/blackfin/mach-bf533/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h @@ -1,9 +1,13 @@ /* - * File: include/asm-blackfin/mach-bf533/anomaly.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * DO NOT EDIT THIS FILE + * This file is under version control at + * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/ + * and can be replaced with that version at any time + * DO NOT EDIT THIS FILE * - * Copyright (C) 2004-2009 Analog Devices Inc. - * Licensed under the GPL-2 or later. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the ADI BSD license. + * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: @@ -202,6 +206,10 @@ #define ANOMALY_05000443 (1) /* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) +/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +#define ANOMALY_05000473 (1) +/* TESTSET Instruction Cannot Be Interrupted */ +#define ANOMALY_05000477 (1) /* These anomalies have been "phased" out of analog.com anomaly sheets and are * here to show running on older silicon just isn't feasible. @@ -349,5 +357,7 @@ #define ANOMALY_05000450 (0) #define ANOMALY_05000465 (0) #define ANOMALY_05000467 (0) +#define ANOMALY_05000474 (0) +#define ANOMALY_05000475 (0) #endif diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h index f091ad2d8ea..d2c427bc665 100644 --- a/arch/blackfin/mach-bf537/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h @@ -1,9 +1,13 @@ /* - * File: include/asm-blackfin/mach-bf537/anomaly.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * DO NOT EDIT THIS FILE + * This file is under version control at + * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/ + * and can be replaced with that version at any time + * DO NOT EDIT THIS FILE * - * Copyright (C) 2004-2009 Analog Devices Inc. - * Licensed under the GPL-2 or later. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the ADI BSD license. + * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: @@ -156,6 +160,10 @@ #define ANOMALY_05000443 (1) /* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) +/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +#define ANOMALY_05000473 (1) +/* TESTSET Instruction Cannot Be Interrupted */ +#define ANOMALY_05000477 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -202,5 +210,7 @@ #define ANOMALY_05000450 (0) #define ANOMALY_05000465 (0) #define ANOMALY_05000467 (0) +#define ANOMALY_05000474 (0) +#define ANOMALY_05000475 (0) #endif diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h index 26b76083e14..d882b7e6f59 100644 --- a/arch/blackfin/mach-bf538/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h @@ -1,9 +1,13 @@ /* - * File: include/asm-blackfin/mach-bf538/anomaly.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * DO NOT EDIT THIS FILE + * This file is under version control at + * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/ + * and can be replaced with that version at any time + * DO NOT EDIT THIS FILE * - * Copyright (C) 2004-2009 Analog Devices Inc. - * Licensed under the GPL-2 or later. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the ADI BSD license. + * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: @@ -128,6 +132,10 @@ #define ANOMALY_05000443 (1) /* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) +/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +#define ANOMALY_05000473 (1) +/* TESTSET Instruction Cannot Be Interrupted */ +#define ANOMALY_05000477 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -176,5 +184,7 @@ #define ANOMALY_05000450 (0) #define ANOMALY_05000465 (0) #define ANOMALY_05000467 (0) +#define ANOMALY_05000474 (0) +#define ANOMALY_05000475 (0) #endif diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h index 52b116ae522..7d08c752449 100644 --- a/arch/blackfin/mach-bf548/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h @@ -1,9 +1,13 @@ /* - * File: include/asm-blackfin/mach-bf548/anomaly.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * DO NOT EDIT THIS FILE + * This file is under version control at + * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/ + * and can be replaced with that version at any time + * DO NOT EDIT THIS FILE * - * Copyright (C) 2004-2009 Analog Devices Inc. - * Licensed under the GPL-2 or later. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the ADI BSD license. + * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: @@ -24,6 +28,8 @@ #define ANOMALY_05000119 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) +/* Data Corruption with Cached External Memory and Non-Cached On-Chip L2 Memory */ +#define ANOMALY_05000220 (1) /* False Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (1) /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ @@ -200,6 +206,14 @@ #define ANOMALY_05000466 (1) /* Possible RX data corruption when control & data EP FIFOs are accessed via the core */ #define ANOMALY_05000467 (1) +/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +#define ANOMALY_05000473 (1) +/* Access to DDR-SDRAM causes system hang under certain PLL/VR settings */ +#define ANOMALY_05000474 (1) +/* Core Hang With L2/L3 Configured in Writeback Cache Mode */ +#define ANOMALY_05000475 (1) +/* TESTSET Instruction Cannot Be Interrupted */ +#define ANOMALY_05000477 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -215,7 +229,6 @@ #define ANOMALY_05000198 (0) #define ANOMALY_05000202 (0) #define ANOMALY_05000215 (0) -#define ANOMALY_05000220 (0) #define ANOMALY_05000227 (0) #define ANOMALY_05000230 (0) #define ANOMALY_05000231 (0) diff --git a/arch/blackfin/mach-bf561/atomic.S b/arch/blackfin/mach-bf561/atomic.S index 0261a5e751b..f99f174b129 100644 --- a/arch/blackfin/mach-bf561/atomic.S +++ b/arch/blackfin/mach-bf561/atomic.S @@ -19,6 +19,16 @@ \reg\().h = _corelock; .endm +.macro safe_testset addr:req, scratch:req +#if ANOMALY_05000477 + cli \scratch; + testset (\addr); + sti \scratch; +#else + testset (\addr); +#endif +.endm + /* * r0 = address of atomic data to flush and invalidate (32bit). * @@ -33,7 +43,7 @@ ENTRY(_get_core_lock) cli r0; coreslot_loadaddr p0; .Lretry_corelock: - testset (p0); + safe_testset p0, r2; if cc jump .Ldone_corelock; SSYNC(r2); jump .Lretry_corelock @@ -56,7 +66,7 @@ ENTRY(_get_core_lock_noflush) cli r0; coreslot_loadaddr p0; .Lretry_corelock_noflush: - testset (p0); + safe_testset p0, r2; if cc jump .Ldone_corelock_noflush; SSYNC(r2); jump .Lretry_corelock_noflush diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h index 70da495c966..5ddc981e993 100644 --- a/arch/blackfin/mach-bf561/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h @@ -1,9 +1,13 @@ /* - * File: include/asm-blackfin/mach-bf561/anomaly.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * DO NOT EDIT THIS FILE + * This file is under version control at + * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/ + * and can be replaced with that version at any time + * DO NOT EDIT THIS FILE * - * Copyright (C) 2004-2009 Analog Devices Inc. - * Licensed under the GPL-2 or later. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the ADI BSD license. + * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: @@ -213,7 +217,11 @@ /* Disabling Peripherals with DMA Running May Cause DMA System Instability */ #define ANOMALY_05000278 (__SILICON_REVISION__ < 5) /* False Hardware Error Exception when ISR Context Is Not Restored */ -#define ANOMALY_05000281 (__SILICON_REVISION__ < 5) +/* Temporarily walk around for bug 5423 till this issue is confirmed by + * official anomaly document. It looks 05000281 still exists on bf561 + * v0.5. + */ +#define ANOMALY_05000281 (__SILICON_REVISION__ <= 5) /* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */ #define ANOMALY_05000283 (1) /* Reads Will Receive Incorrect Data under Certain Conditions */ @@ -280,6 +288,12 @@ #define ANOMALY_05000443 (1) /* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) +/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +#define ANOMALY_05000473 (1) +/* Core Hang With L2/L3 Configured in Writeback Cache Mode */ +#define ANOMALY_05000475 (__SILICON_REVISION__ < 4) +/* TESTSET Instruction Cannot Be Interrupted */ +#define ANOMALY_05000477 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000119 (0) @@ -304,5 +318,6 @@ #define ANOMALY_05000450 (0) #define ANOMALY_05000465 (0) #define ANOMALY_05000467 (0) +#define ANOMALY_05000474 (0) #endif diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c index 9dbafcdcf47..f2ca211a76a 100644 --- a/arch/blackfin/mach-common/arch_checks.c +++ b/arch/blackfin/mach-common/arch_checks.c @@ -57,3 +57,8 @@ (!defined(CONFIG_BFIN_EXTMEM_DCACHEABLE) && defined(CONFIG_BFIN_L2_WRITEBACK))) # error You are exposing Anomaly 220 in this config, either config L2 as Write Through, or make External Memory WB. #endif + +#if ANOMALY_05000475 && \ + (defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)) +# error "Anomaly 475 does not allow you to use Write Back cache with L2 or External Memory" +#endif diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index d98585f3237..d92b168c832 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -276,10 +276,9 @@ void smp_send_reschedule(int cpu) if (cpu_is_offline(cpu)) return; - msg = kmalloc(sizeof(*msg), GFP_ATOMIC); + msg = kzalloc(sizeof(*msg), GFP_ATOMIC); if (!msg) return; - memset(msg, 0, sizeof(msg)); INIT_LIST_HEAD(&msg->list); msg->type = BFIN_IPI_RESCHEDULE; @@ -305,10 +304,9 @@ void smp_send_stop(void) if (cpus_empty(callmap)) return; - msg = kmalloc(sizeof(*msg), GFP_ATOMIC); + msg = kzalloc(sizeof(*msg), GFP_ATOMIC); if (!msg) return; - memset(msg, 0, sizeof(msg)); INIT_LIST_HEAD(&msg->list); msg->type = BFIN_IPI_CPU_STOP; diff --git a/arch/parisc/kernel/unwind.c b/arch/parisc/kernel/unwind.c index 69dad5a850a..a36799e8569 100644 --- a/arch/parisc/kernel/unwind.c +++ b/arch/parisc/kernel/unwind.c @@ -28,7 +28,7 @@ #define dbg(x...) #endif -#define KERNEL_START (KERNEL_BINARY_TEXT_START - 0x1000) +#define KERNEL_START (KERNEL_BINARY_TEXT_START) extern struct unwind_table_entry __start___unwind[]; extern struct unwind_table_entry __stop___unwind[]; diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S index fda4baa059b..9dab4a4e09f 100644 --- a/arch/parisc/kernel/vmlinux.lds.S +++ b/arch/parisc/kernel/vmlinux.lds.S @@ -78,9 +78,6 @@ SECTIONS */ . = ALIGN(PAGE_SIZE); data_start = .; - EXCEPTION_TABLE(16) - - NOTES /* unwind info */ .PARISC.unwind : { @@ -89,6 +86,9 @@ SECTIONS __stop___unwind = .; } + EXCEPTION_TABLE(16) + NOTES + /* Data */ RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE) diff --git a/arch/powerpc/include/asm/kmap_types.h b/arch/powerpc/include/asm/kmap_types.h index b6bac6f61c1..916369575c9 100644 --- a/arch/powerpc/include/asm/kmap_types.h +++ b/arch/powerpc/include/asm/kmap_types.h @@ -29,5 +29,16 @@ enum km_type { KM_TYPE_NR }; +/* + * This is a temporary build fix that (so they say on lkml....) should no longer + * be required after 2.6.33, because of changes planned to the kmap code. + * Let's try to remove this cruft then. + */ +#ifdef CONFIG_DEBUG_HIGHMEM +#define KM_NMI (-1) +#define KM_NMI_PTE (-1) +#define KM_IRQ_PTE (-1) +#endif + #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_KMAP_TYPES_H */ diff --git a/arch/sparc/mm/init_64.h b/arch/sparc/mm/init_64.h index c2f772dbd55..77d1b313e34 100644 --- a/arch/sparc/mm/init_64.h +++ b/arch/sparc/mm/init_64.h @@ -45,7 +45,7 @@ extern void free_initmem(void); #define VMEMMAP_ALIGN(x) (((x)+VMEMMAP_CHUNK-1UL)&VMEMMAP_CHUNK_MASK) #define VMEMMAP_SIZE ((((1UL << MAX_PHYSADDR_BITS) >> PAGE_SHIFT) * \ - sizeof(struct page *)) >> VMEMMAP_CHUNK_SHIFT) + sizeof(struct page)) >> VMEMMAP_CHUNK_SHIFT) extern unsigned long vmemmap_table[VMEMMAP_SIZE]; #endif diff --git a/arch/x86/kernel/acpi/processor.c b/arch/x86/kernel/acpi/processor.c index d296f4a195c..d85d1b2432b 100644 --- a/arch/x86/kernel/acpi/processor.c +++ b/arch/x86/kernel/acpi/processor.c @@ -79,7 +79,8 @@ void arch_acpi_processor_init_pdc(struct acpi_processor *pr) struct cpuinfo_x86 *c = &cpu_data(pr->id); pr->pdc = NULL; - if (c->x86_vendor == X86_VENDOR_INTEL) + if (c->x86_vendor == X86_VENDOR_INTEL || + c->x86_vendor == X86_VENDOR_CENTAUR) init_intel_pdc(pr, c); return; |