diff options
Diffstat (limited to 'arch')
35 files changed, 107 insertions, 4501 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 87cee341eb5..bfab055ad7c 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -203,39 +203,6 @@ config MIPS_EV64120 <http://www.marvell.com/>. Say Y here if you wish to build a kernel for this platform. -config MIPS_IVR - bool "Globespan IVR board" - select DMA_NONCOHERENT - select HW_HAS_PCI - select ITE_BOARD_GEN - select SYS_HAS_CPU_NEVADA - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL - select SYS_SUPPORTS_LITTLE_ENDIAN - help - This is an evaluation board built by Globespan to showcase thir - iVR (Internet Video Recorder) design. It utilizes a QED RM5231 - R5000 MIPS core. More information can be found out their website - located at <http://www.globespan.net/>. Say Y here if you wish to - build a kernel for this platform. - -config MIPS_ITE8172 - bool "ITE 8172G board" - select DMA_NONCOHERENT - select HW_HAS_PCI - select ITE_BOARD_GEN - select SYS_HAS_CPU_R5432 - select SYS_HAS_CPU_NEVADA - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL - select SYS_SUPPORTS_LITTLE_ENDIAN - help - Ths is an evaluation board made by ITE <http://www.ite.com.tw/> - with ATX form factor that utilizes a MIPS R5000 to work with its - ITE8172G companion internet appliance chip. The MIPS core can be - either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build - a kernel for this platform. - config MACH_JAZZ bool "Jazz family of machines" select ARC @@ -804,7 +771,6 @@ endchoice source "arch/mips/ddb5xxx/Kconfig" source "arch/mips/gt64120/ev64120/Kconfig" source "arch/mips/jazz/Kconfig" -source "arch/mips/ite-boards/Kconfig" source "arch/mips/lasat/Kconfig" source "arch/mips/momentum/Kconfig" source "arch/mips/pmc-sierra/Kconfig" @@ -837,6 +803,10 @@ config GENERIC_CALIBRATE_DELAY bool default y +config GENERIC_TIME + bool + default y + config SCHED_NO_NO_OMIT_FRAME_POINTER bool default y @@ -964,9 +934,6 @@ config MIPS_RM9122 config PCI_MARVELL bool -config ITE_BOARD_GEN - bool - config SOC_AU1000 bool select SOC_AU1X00 @@ -1050,16 +1017,6 @@ config AU1X00_USB_DEVICE depends on MIPS_PB1500 || MIPS_PB1100 || MIPS_PB1000 default n -config IT8172_CIR - bool - depends on MIPS_ITE8172 || MIPS_IVR - default y - -config IT8712 - bool - depends on MIPS_ITE8172 - default y - config BOOT_ELF32 bool diff --git a/arch/mips/Makefile b/arch/mips/Makefile index e521826b423..2124350ab94 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -287,19 +287,6 @@ cflags-$(CONFIG_WR_PPMC) += -Iinclude/asm-mips/mach-wrppmc load-$(CONFIG_WR_PPMC) += 0xffffffff80100000 # -# Globespan IVR eval board with QED 5231 CPU -# -core-$(CONFIG_ITE_BOARD_GEN) += arch/mips/ite-boards/generic/ -core-$(CONFIG_MIPS_IVR) += arch/mips/ite-boards/ivr/ -load-$(CONFIG_MIPS_IVR) += 0xffffffff80100000 - -# -# ITE 8172 eval board with QED 5231 CPU -# -core-$(CONFIG_MIPS_ITE8172) += arch/mips/ite-boards/qed-4n-s01b/ -load-$(CONFIG_MIPS_ITE8172) += 0xffffffff80100000 - -# # For all MIPS, Inc. eval boards # core-$(CONFIG_MIPS_BOARDS_GEN) += arch/mips/mips-boards/generic/ diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig index be901df7fef..fe1387eb83c 100644 --- a/arch/mips/configs/decstation_defconfig +++ b/arch/mips/configs/decstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:01 2006 +# Linux kernel version: 2.6.18 +# Tue Oct 3 11:57:53 2006 # CONFIG_MIPS=y @@ -167,27 +167,28 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set -CONFIG_RELAY=y +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -205,6 +206,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -231,7 +233,6 @@ CONFIG_MMU=y # # PCCARD (PCMCIA/CardBus) support # -# CONFIG_PCCARD is not set # # PCI Hotplug Support @@ -258,9 +259,10 @@ CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set -# CONFIG_NET_KEY is not set +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_NET_KEY=m CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set +CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y @@ -269,22 +271,37 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_IPV6=m +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=y +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +# CONFIG_IPV6_TUNNEL is not set +CONFIG_IPV6_SUBTREES=y +CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set @@ -304,14 +321,13 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set +CONFIG_VLAN_8021Q=m # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -327,13 +343,8 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y +# CONFIG_IEEE80211 is not set +CONFIG_FIB_RULES=y # # Device Drivers @@ -344,8 +355,6 @@ CONFIG_WIRELESS_EXT=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set # CONFIG_SYS_HYPERVISOR is not set # @@ -387,8 +396,9 @@ CONFIG_BLK_DEV_LOOP=m # # SCSI device support # -CONFIG_RAID_ATTRS=m +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -410,12 +420,13 @@ CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # -# SCSI Transport Attributes +# SCSI Transports # CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_FC_ATTRS is not set CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m +# CONFIG_SCSI_SAS_LIBSAS is not set # # SCSI low-level drivers @@ -423,10 +434,14 @@ CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m CONFIG_SCSI_DECNCR=y # CONFIG_SCSI_DECSII is not set -# CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set # +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# # Multi-device support (RAID and LVM) # # CONFIG_MD is not set @@ -456,18 +471,7 @@ CONFIG_NETDEVICES=y # # PHY device support # -CONFIG_PHYLIB=m - -# -# MII PHY device drivers -# -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m +# CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) @@ -712,7 +716,12 @@ CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set @@ -747,11 +756,13 @@ CONFIG_FUSE_FS=m # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=y # # Miscellaneous filesystems @@ -769,7 +780,7 @@ CONFIG_RAMFS=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set CONFIG_UFS_FS=y -# CONFIG_UFS_FS_WRITE is not set +CONFIG_UFS_FS_WRITE=y # CONFIG_UFS_DEBUG is not set # @@ -777,24 +788,25 @@ CONFIG_UFS_FS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V3_ACL=y # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # CONFIG_9P_FS is not set +CONFIG_GENERIC_ACL=y # # Partition Types @@ -832,44 +844,29 @@ CONFIG_ULTRIX_PARTITION=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_RWSEMS is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set -# CONFIG_DEBUG_VM is not set -CONFIG_FORCED_INLINING=y -# CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_KGDB is not set -# CONFIG_RUNTIME_DEBUG is not set -# CONFIG_MIPS_UNCACHED is not set # # Security options # -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=m CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m @@ -879,9 +876,12 @@ CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -903,7 +903,7 @@ CONFIG_CRYPTO_CRC32C=m # Library routines # # CONFIG_CRC_CCITT is not set -CONFIG_CRC16=m +# CONFIG_CRC16 is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m diff --git a/arch/mips/configs/it8172_defconfig b/arch/mips/configs/it8172_defconfig deleted file mode 100644 index 18d20fb7d5f..00000000000 --- a/arch/mips/configs/it8172_defconfig +++ /dev/null @@ -1,964 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:11 2006 -# -CONFIG_MIPS=y - -# -# Machine selection -# -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -CONFIG_MIPS_ITE8172=y -# CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set -# CONFIG_MIPS_ATLAS is not set -# CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set -# CONFIG_MOMENCO_OCELOT_G is not set -# CONFIG_MIPS_XXS1500 is not set -# CONFIG_PNX8550_V2PCI is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_DDB5477 is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set -# CONFIG_MARKEINS is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SNI_RM200_PCI is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -# CONFIG_IT8172_REVC is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_DMA_NEED_PCI_MAP_STATE=y -# CONFIG_CPU_BIG_ENDIAN is not set -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_ITE_BOARD_GEN=y -CONFIG_IT8172_CIR=y -CONFIG_IT8712=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 - -# -# CPU selection -# -# CONFIG_CPU_MIPS32_R1 is not set -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -CONFIG_CPU_NEVADA=y -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_R5432=y -CONFIG_SYS_HAS_CPU_NEVADA=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y - -# -# Kernel type -# -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_VPE_LOADER is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -# CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set -# CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y -# CONFIG_HZ_1024 is not set -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_HOTPLUG is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y - -# -# Block layer -# -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# Bus options (PCI, PCMCIA, EISA, ISA, TC) -# -CONFIG_HW_HAS_PCI=y -# CONFIG_PCI is not set -CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -CONFIG_NET_KEY=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_NETWORK_SECMARK=y -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -CONFIG_CONNECTOR=m - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -# CONFIG_MTD_PARTITIONS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -# CONFIG_MTD_BLOCK is not set -# CONFIG_MTD_BLOCK_RO is not set -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x8000000 -CONFIG_MTD_PHYSMAP_LEN=0x2000000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set -CONFIG_ATA_OVER_ETH=m - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -CONFIG_RAID_ATTRS=m -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# PHY device support -# -CONFIG_PHYLIB=m - -# -# MII PHY device drivers -# -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_DM9000 is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_LIBPS2 is not set -CONFIG_SERIO_RAW=m -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_QTRONIX_KEYBOARD is not set -# CONFIG_IT8172_SCR0 is not set -# CONFIG_IT8172_SCR1 is not set -# CONFIG_ITE_GPIO is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# -CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# -# CONFIG_SND is not set - -# -# Open Sound System -# -CONFIG_SOUND_PRIME=y -CONFIG_SOUND_IT8172=y -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -CONFIG_FUSE_FS=m - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -# CONFIG_TMPFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" - -# -# Security options -# -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -CONFIG_CRC16=m -CONFIG_CRC32=m -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m -CONFIG_PLIST=y diff --git a/arch/mips/configs/ivr_defconfig b/arch/mips/configs/ivr_defconfig deleted file mode 100644 index 99831d0bf76..00000000000 --- a/arch/mips/configs/ivr_defconfig +++ /dev/null @@ -1,920 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:12 2006 -# -CONFIG_MIPS=y - -# -# Machine selection -# -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set -CONFIG_MIPS_IVR=y -# CONFIG_MIPS_ITE8172 is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set -# CONFIG_MIPS_ATLAS is not set -# CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set -# CONFIG_MOMENCO_OCELOT_G is not set -# CONFIG_MIPS_XXS1500 is not set -# CONFIG_PNX8550_V2PCI is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_DDB5477 is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set -# CONFIG_MARKEINS is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SNI_RM200_PCI is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_DMA_NEED_PCI_MAP_STATE=y -# CONFIG_CPU_BIG_ENDIAN is not set -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_ITE_BOARD_GEN=y -CONFIG_IT8172_CIR=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 - -# -# CPU selection -# -# CONFIG_CPU_MIPS32_R1 is not set -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -CONFIG_CPU_NEVADA=y -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_NEVADA=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y - -# -# Kernel type -# -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_VPE_LOADER is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -# CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set -# CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y -# CONFIG_HZ_1024 is not set -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y - -# -# Block layer -# -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# Bus options (PCI, PCMCIA, EISA, ISA, TC) -# -CONFIG_HW_HAS_PCI=y -CONFIG_PCI=y -CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -CONFIG_NET_KEY=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_NETWORK_SECMARK=y -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -CONFIG_CONNECTOR=m - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set -CONFIG_ATA_OVER_ETH=m - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_IDEPCI is not set -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -CONFIG_RAID_ATTRS=m -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -CONFIG_PHYLIB=m - -# -# MII PHY device drivers -# -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_DM9000 is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_LIBPS2 is not set -CONFIG_SERIO_RAW=m -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -# CONFIG_SERIAL_NONSTANDARD is not set -CONFIG_QTRONIX_KEYBOARD=y -CONFIG_IT8172_SCR0=y -CONFIG_IT8172_SCR1=y - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_HW_RANDOM is not set -CONFIG_RTC=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -CONFIG_FUSE_FS=m - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -# CONFIG_TMPFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" - -# -# Security options -# -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -CONFIG_CRC16=m -CONFIG_CRC32=m -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m -CONFIG_PLIST=y diff --git a/arch/mips/dec/boot/Makefile b/arch/mips/dec/boot/Makefile deleted file mode 100644 index bcea41698ef..00000000000 --- a/arch/mips/dec/boot/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# -# Makefile for the DECstation family specific parts of the kernel -# - -netboot: all - $(LD) -N -G 0 -T ld.ecoff ../../boot/zImage \ - dec_boot.o ramdisk.img -o nbImage - -obj-y := decstation.o - -clean: - rm -f nbImage diff --git a/arch/mips/dec/boot/decstation.c b/arch/mips/dec/boot/decstation.c deleted file mode 100644 index 4db8bacaf22..00000000000 --- a/arch/mips/dec/boot/decstation.c +++ /dev/null @@ -1,84 +0,0 @@ -/* - * arch/mips/dec/decstation.c - */ -#include <asm/sections.h> - -#define RELOC -#define INITRD -#define DEBUG_BOOT - -/* - * Magic number indicating REX PROM available on DECSTATION. - */ -#define REX_PROM_MAGIC 0x30464354 - -#define REX_PROM_CLEARCACHE 0x7c/4 -#define REX_PROM_PRINTF 0x30/4 - -#define VEC_RESET 0xBFC00000 /* Prom base address */ -#define PMAX_PROM_ENTRY(x) (VEC_RESET+((x)*8)) /* Prom jump table */ -#define PMAX_PROM_PRINTF PMAX_PROM_ENTRY(17) - -#define PARAM (k_start + 0x2000) - -#define LOADER_TYPE (*(unsigned char *) (PARAM+0x210)) -#define INITRD_START (*(unsigned long *) (PARAM+0x218)) -#define INITRD_SIZE (*(unsigned long *) (PARAM+0x21c)) - -extern int _ftext; /* begin and end of kernel image */ -extern void kernel_entry(int, char **, unsigned long, int *); - -void * memcpy(void * dest, const void *src, unsigned int count) -{ - unsigned long *tmp = (unsigned long *) dest, *s = (unsigned long *) src; - - count >>= 2; - while (count--) - *tmp++ = *s++; - - return dest; -} - -void dec_entry(int argc, char **argv, - unsigned long magic, int *prom_vec) -{ - void (*rex_clear_cache)(void); - int (*prom_printf)(char *, ...); - unsigned long k_start, len; - - /* - * The DS5100 leaves cpu with BEV enabled, clear it. - */ - asm( "lui\t$8,0x3000\n\t" - "mtc0\t$8,$12\n\t" - ".section\t.sdata\n\t" - ".section\t.sbss\n\t" - ".section\t.text" - : : : "$8"); - -#ifdef DEBUG_BOOT - if (magic == REX_PROM_MAGIC) { - prom_printf = (int (*)(char *, ...)) *(prom_vec + REX_PROM_PRINTF); - } else { - prom_printf = (int (*)(char *, ...)) PMAX_PROM_PRINTF; - } - prom_printf("Launching kernel...\n"); -#endif - - k_start = (unsigned long) (&kernel_entry) & 0xffff0000; - -#ifdef RELOC - /* - * Now copy kernel image to its destination. - */ - len = ((unsigned long) (&_end) - k_start); - memcpy((void *)k_start, &_ftext, len); -#endif - - if (magic == REX_PROM_MAGIC) { - rex_clear_cache = (void (*)(void)) * (prom_vec + REX_PROM_CLEARCACHE); - rex_clear_cache(); - } - - kernel_entry(argc, argv, magic, prom_vec); -} diff --git a/arch/mips/dec/boot/ld.ecoff b/arch/mips/dec/boot/ld.ecoff deleted file mode 100644 index aaa633dfb5f..00000000000 --- a/arch/mips/dec/boot/ld.ecoff +++ /dev/null @@ -1,43 +0,0 @@ -OUTPUT_FORMAT("ecoff-littlemips") -OUTPUT_ARCH(mips) -ENTRY(dec_entry) -SECTIONS -{ - . = 0x80200000; - - .text : - { - _ftext = .; - *(.text) - *(.fixup) - } - .rdata : - { - *(.rodata .rodata.* .rdata) - } - .data : - { - . = ALIGN(0x1000); - ramdisk.img (.data) - *(.data) - } - .sdata : - { - *(.sdata) - } - _gp = .; - .sbss : - { - *(.sbss) - *(.scommon) - } - .bss : - { - *(.dynbss) - *(.bss) - *(COMMON) - } - /DISCARD/ : { - *(.reginfo .mdebug .note) - } -} diff --git a/arch/mips/dec/time.c b/arch/mips/dec/time.c index 57294740c2d..4cf0c06e241 100644 --- a/arch/mips/dec/time.c +++ b/arch/mips/dec/time.c @@ -184,8 +184,6 @@ void __init dec_time_init(void) CMOS_WRITE(RTC_REF_CLCK_32KHZ | (16 - __ffs(HZ)), RTC_REG_A); } -EXPORT_SYMBOL(do_settimeofday); - void __init plat_timer_setup(struct irqaction *irq) { setup_irq(dec_interrupt[DEC_IRQ_RTC], irq); diff --git a/arch/mips/ite-boards/Kconfig b/arch/mips/ite-boards/Kconfig deleted file mode 100644 index a6d59ad8f84..00000000000 --- a/arch/mips/ite-boards/Kconfig +++ /dev/null @@ -1,8 +0,0 @@ -config IT8172_REVC - bool "Support for older IT8172 (Rev C)" - depends on MIPS_ITE8172 - help - Say Y here to support the older, Revision C version of the Integrated - Technology Express, Inc. ITE8172 SBC. Vendor page at - <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the - board at <http://www.mvista.com/partners/semiconductor/ite.html>. diff --git a/arch/mips/ite-boards/generic/Makefile b/arch/mips/ite-boards/generic/Makefile deleted file mode 100644 index 63431538d0e..00000000000 --- a/arch/mips/ite-boards/generic/Makefile +++ /dev/null @@ -1,15 +0,0 @@ -# -# Copyright 2000 MontaVista Software Inc. -# Author: MontaVista Software, Inc. -# ppopov@mvista.com or source@mvista.com -# -# Makefile for the ITE 8172 (qed-4n-s01b) board, generic files. -# - -obj-y += it8172_setup.o irq.o pmon_prom.o \ - time.o lpc.o puts.o reset.o - -obj-$(CONFIG_IT8172_CIR)+= it8172_cir.o -obj-$(CONFIG_KGDB) += dbg_io.o - -EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/ite-boards/generic/dbg_io.c b/arch/mips/ite-boards/generic/dbg_io.c deleted file mode 100644 index 8e9cd8a9670..00000000000 --- a/arch/mips/ite-boards/generic/dbg_io.c +++ /dev/null @@ -1,124 +0,0 @@ - - -#ifdef CONFIG_KGDB - -/* --- CONFIG --- */ - -/* we need uint32 uint8 */ -/* #include "types.h" */ -typedef unsigned char uint8; -typedef unsigned int uint32; - -/* --- END OF CONFIG --- */ - -#define UART16550_BAUD_2400 2400 -#define UART16550_BAUD_4800 4800 -#define UART16550_BAUD_9600 9600 -#define UART16550_BAUD_19200 19200 -#define UART16550_BAUD_38400 38400 -#define UART16550_BAUD_57600 57600 -#define UART16550_BAUD_115200 115200 - -#define UART16550_PARITY_NONE 0 -#define UART16550_PARITY_ODD 0x08 -#define UART16550_PARITY_EVEN 0x18 -#define UART16550_PARITY_MARK 0x28 -#define UART16550_PARITY_SPACE 0x38 - -#define UART16550_DATA_5BIT 0x0 -#define UART16550_DATA_6BIT 0x1 -#define UART16550_DATA_7BIT 0x2 -#define UART16550_DATA_8BIT 0x3 - -#define UART16550_STOP_1BIT 0x0 -#define UART16550_STOP_2BIT 0x4 - -/* ----------------------------------------------------- */ - -/* === CONFIG === */ - -/* [stevel] we use the IT8712 serial port for kgdb */ -#define DEBUG_BASE 0xB40003F8 /* 8712 serial port 1 base address */ -#define MAX_BAUD 115200 - -/* === END OF CONFIG === */ - -/* register offset */ -#define OFS_RCV_BUFFER 0 -#define OFS_TRANS_HOLD 0 -#define OFS_SEND_BUFFER 0 -#define OFS_INTR_ENABLE 1 -#define OFS_INTR_ID 2 -#define OFS_DATA_FORMAT 3 -#define OFS_LINE_CONTROL 3 -#define OFS_MODEM_CONTROL 4 -#define OFS_RS232_OUTPUT 4 -#define OFS_LINE_STATUS 5 -#define OFS_MODEM_STATUS 6 -#define OFS_RS232_INPUT 6 -#define OFS_SCRATCH_PAD 7 - -#define OFS_DIVISOR_LSB 0 -#define OFS_DIVISOR_MSB 1 - - -/* memory-mapped read/write of the port */ -#define UART16550_READ(y) (*((volatile uint8*)(DEBUG_BASE + y))) -#define UART16550_WRITE(y,z) ((*((volatile uint8*)(DEBUG_BASE + y))) = z) - -void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) -{ - /* disable interrupts */ - UART16550_WRITE(OFS_INTR_ENABLE, 0); - - /* set up baud rate */ - { - uint32 divisor; - - /* set DIAB bit */ - UART16550_WRITE(OFS_LINE_CONTROL, 0x80); - - /* set divisor */ - divisor = MAX_BAUD / baud; - UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff); - UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8); - - /* clear DIAB bit */ - UART16550_WRITE(OFS_LINE_CONTROL, 0x0); - } - - /* set data format */ - UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop); -} - -static int remoteDebugInitialized = 0; - -uint8 getDebugChar(void) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(UART16550_BAUD_115200, - UART16550_DATA_8BIT, - UART16550_PARITY_NONE, UART16550_STOP_1BIT); - } - - while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0); - return UART16550_READ(OFS_RCV_BUFFER); -} - - -int putDebugChar(uint8 byte) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(UART16550_BAUD_115200, - UART16550_DATA_8BIT, - UART16550_PARITY_NONE, UART16550_STOP_1BIT); - } - - while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0); - UART16550_WRITE(OFS_SEND_BUFFER, byte); - return 1; -} - -#endif diff --git a/arch/mips/ite-boards/generic/irq.c b/arch/mips/ite-boards/generic/irq.c deleted file mode 100644 index cb59ca4f76f..00000000000 --- a/arch/mips/ite-boards/generic/irq.c +++ /dev/null @@ -1,308 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * ITE 8172G interrupt/setup routines. - * - * Copyright 2000,2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * Part of this file was derived from Carsten Langgaard's - * arch/mips/mips-boards/atlas/atlas_int.c. - * - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/kernel_stat.h> -#include <linux/module.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/timex.h> -#include <linux/slab.h> -#include <linux/random.h> -#include <linux/serial_reg.h> -#include <linux/bitops.h> - -#include <asm/bootinfo.h> -#include <asm/io.h> -#include <asm/mipsregs.h> -#include <asm/system.h> -#include <asm/it8172/it8172.h> -#include <asm/it8172/it8172_int.h> -#include <asm/it8172/it8172_dbg.h> - -/* revisit */ -#define EXT_IRQ0_TO_IP 2 /* IP 2 */ -#define EXT_IRQ5_TO_IP 7 /* IP 7 */ - -#define ALLINTS_NOTIMER (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4) - -extern void set_debug_traps(void); -extern void mips_timer_interrupt(int irq, struct pt_regs *regs); - -struct it8172_intc_regs volatile *it8172_hw0_icregs = - (struct it8172_intc_regs volatile *)(KSEG1ADDR(IT8172_PCI_IO_BASE + IT_INTC_BASE)); - -static void disable_it8172_irq(unsigned int irq_nr) -{ - if ( (irq_nr >= IT8172_LPC_IRQ_BASE) && (irq_nr <= IT8172_SERIRQ_15)) { - /* LPC interrupt */ - it8172_hw0_icregs->lpc_mask |= - (1 << (irq_nr - IT8172_LPC_IRQ_BASE)); - } else if ( (irq_nr >= IT8172_LB_IRQ_BASE) && (irq_nr <= IT8172_IOCHK_IRQ)) { - /* Local Bus interrupt */ - it8172_hw0_icregs->lb_mask |= - (1 << (irq_nr - IT8172_LB_IRQ_BASE)); - } else if ( (irq_nr >= IT8172_PCI_DEV_IRQ_BASE) && (irq_nr <= IT8172_DMA_IRQ)) { - /* PCI and other interrupts */ - it8172_hw0_icregs->pci_mask |= - (1 << (irq_nr - IT8172_PCI_DEV_IRQ_BASE)); - } else if ( (irq_nr >= IT8172_NMI_IRQ_BASE) && (irq_nr <= IT8172_POWER_NMI_IRQ)) { - /* NMI interrupts */ - it8172_hw0_icregs->nmi_mask |= - (1 << (irq_nr - IT8172_NMI_IRQ_BASE)); - } else { - panic("disable_it8172_irq: bad irq %d", irq_nr); - } -} - -static void enable_it8172_irq(unsigned int irq_nr) -{ - if ( (irq_nr >= IT8172_LPC_IRQ_BASE) && (irq_nr <= IT8172_SERIRQ_15)) { - /* LPC interrupt */ - it8172_hw0_icregs->lpc_mask &= - ~(1 << (irq_nr - IT8172_LPC_IRQ_BASE)); - } - else if ( (irq_nr >= IT8172_LB_IRQ_BASE) && (irq_nr <= IT8172_IOCHK_IRQ)) { - /* Local Bus interrupt */ - it8172_hw0_icregs->lb_mask &= - ~(1 << (irq_nr - IT8172_LB_IRQ_BASE)); - } - else if ( (irq_nr >= IT8172_PCI_DEV_IRQ_BASE) && (irq_nr <= IT8172_DMA_IRQ)) { - /* PCI and other interrupts */ - it8172_hw0_icregs->pci_mask &= - ~(1 << (irq_nr - IT8172_PCI_DEV_IRQ_BASE)); - } - else if ( (irq_nr >= IT8172_NMI_IRQ_BASE) && (irq_nr <= IT8172_POWER_NMI_IRQ)) { - /* NMI interrupts */ - it8172_hw0_icregs->nmi_mask &= - ~(1 << (irq_nr - IT8172_NMI_IRQ_BASE)); - } - else { - panic("enable_it8172_irq: bad irq %d", irq_nr); - } -} - -static unsigned int startup_ite_irq(unsigned int irq) -{ - enable_it8172_irq(irq); - return 0; -} - -#define shutdown_ite_irq disable_it8172_irq -#define mask_and_ack_ite_irq disable_it8172_irq - -static void end_ite_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_it8172_irq(irq); -} - -static struct irq_chip it8172_irq_type = { - .typename = "ITE8172", - .startup = startup_ite_irq, - .shutdown = shutdown_ite_irq, - .enable = enable_it8172_irq, - .disable = disable_it8172_irq, - .ack = mask_and_ack_ite_irq, - .end = end_ite_irq, -}; - - -static void enable_none(unsigned int irq) { } -static unsigned int startup_none(unsigned int irq) { return 0; } -static void disable_none(unsigned int irq) { } -static void ack_none(unsigned int irq) { } - -/* startup is the same as "enable", shutdown is same as "disable" */ -#define shutdown_none disable_none -#define end_none enable_none - -static struct irq_chip cp0_irq_type = { - .typename = "CP0 Count", - .startup = startup_none, - .shutdown = shutdown_none, - .enable = enable_none, - .disable = disable_none, - .ack = ack_none, - .end = end_none -}; - -void enable_cpu_timer(void) -{ - unsigned long flags; - - local_irq_save(flags); - set_c0_status(0x100 << EXT_IRQ5_TO_IP); - local_irq_restore(flags); -} - -void __init arch_init_irq(void) -{ - int i; - unsigned long flags; - - /* mask all interrupts */ - it8172_hw0_icregs->lb_mask = 0xffff; - it8172_hw0_icregs->lpc_mask = 0xffff; - it8172_hw0_icregs->pci_mask = 0xffff; - it8172_hw0_icregs->nmi_mask = 0xffff; - - /* make all interrupts level triggered */ - it8172_hw0_icregs->lb_trigger = 0; - it8172_hw0_icregs->lpc_trigger = 0; - it8172_hw0_icregs->pci_trigger = 0; - it8172_hw0_icregs->nmi_trigger = 0; - - /* active level setting */ - /* uart, keyboard, and mouse are active high */ - it8172_hw0_icregs->lpc_level = (0x10 | 0x2 | 0x1000); - it8172_hw0_icregs->lb_level |= 0x20; - - /* keyboard and mouse are edge triggered */ - it8172_hw0_icregs->lpc_trigger |= (0x2 | 0x1000); - - -#if 0 - // Enable this piece of code to make internal USB interrupt - // edge triggered. - it8172_hw0_icregs->pci_trigger |= - (1 << (IT8172_USB_IRQ - IT8172_PCI_DEV_IRQ_BASE)); - it8172_hw0_icregs->pci_level &= - ~(1 << (IT8172_USB_IRQ - IT8172_PCI_DEV_IRQ_BASE)); -#endif - - for (i = 0; i <= IT8172_LAST_IRQ; i++) { - irq_desc[i].chip = &it8172_irq_type; - spin_lock_init(&irq_desc[i].lock); - } - irq_desc[MIPS_CPU_TIMER_IRQ].chip = &cp0_irq_type; - set_c0_status(ALLINTS_NOTIMER); -} - -void mips_spurious_interrupt(struct pt_regs *regs) -{ -#if 1 - return; -#else - unsigned long status, cause; - - printk("got spurious interrupt\n"); - status = read_c0_status(); - cause = read_c0_cause(); - printk("status %x cause %x\n", status, cause); - printk("epc %x badvaddr %x \n", regs->cp0_epc, regs->cp0_badvaddr); -#endif -} - -void it8172_hw0_irqdispatch(struct pt_regs *regs) -{ - int irq; - unsigned short intstatus = 0, status = 0; - - intstatus = it8172_hw0_icregs->intstatus; - if (intstatus & 0x8) { - panic("Got NMI interrupt"); - } else if (intstatus & 0x4) { - /* PCI interrupt */ - irq = 0; - status |= it8172_hw0_icregs->pci_req; - while (!(status & 0x1)) { - irq++; - status >>= 1; - } - irq += IT8172_PCI_DEV_IRQ_BASE; - } else if (intstatus & 0x1) { - /* Local Bus interrupt */ - irq = 0; - status |= it8172_hw0_icregs->lb_req; - while (!(status & 0x1)) { - irq++; - status >>= 1; - } - irq += IT8172_LB_IRQ_BASE; - } else if (intstatus & 0x2) { - /* LPC interrupt */ - /* Since some lpc interrupts are edge triggered, - * we could lose an interrupt this way because - * we acknowledge all ints at onces. Revisit. - */ - status |= it8172_hw0_icregs->lpc_req; - it8172_hw0_icregs->lpc_req = 0; /* acknowledge ints */ - irq = 0; - while (!(status & 0x1)) { - irq++; - status >>= 1; - } - irq += IT8172_LPC_IRQ_BASE; - } else - return; - - do_IRQ(irq, regs); -} - -asmlinkage void plat_irq_dispatch(struct pt_regs *regs) -{ - unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; - - if (!pending) - mips_spurious_interrupt(regs); - else if (pending & CAUSEF_IP7) - ll_timer_interrupt(127, regs); - else if (pending & CAUSEF_IP2) - it8172_hw0_irqdispatch(regs); -} - -void show_pending_irqs(void) -{ - fputs("intstatus: "); - put32(it8172_hw0_icregs->intstatus); - puts(""); - - fputs("pci_req: "); - put32(it8172_hw0_icregs->pci_req); - puts(""); - - fputs("lb_req: "); - put32(it8172_hw0_icregs->lb_req); - puts(""); - - fputs("lpc_req: "); - put32(it8172_hw0_icregs->lpc_req); - puts(""); -} diff --git a/arch/mips/ite-boards/generic/it8172_cir.c b/arch/mips/ite-boards/generic/it8172_cir.c deleted file mode 100644 index bfc25adcfec..00000000000 --- a/arch/mips/ite-boards/generic/it8172_cir.c +++ /dev/null @@ -1,170 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * IT8172 Consumer IR port generic routines. - * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - - -#ifdef CONFIG_IT8172_CIR - -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/it8172/it8172.h> -#include <asm/it8172/it8172_cir.h> - - -volatile struct it8172_cir_regs *cir_regs[NUM_CIR_PORTS] = { - (volatile struct it8172_cir_regs *)(KSEG1ADDR(IT8172_PCI_IO_BASE + IT_CIR0_BASE)), - (volatile struct it8172_cir_regs *)(KSEG1ADDR(IT8172_PCI_IO_BASE + IT_CIR1_BASE))}; - - -/* - * Initialize Consumer IR Port. - */ -int cir_port_init(struct cir_port *cir) -{ - int port = cir->port; - unsigned char data; - - /* set baud rate */ - cir_regs[port]->bdlr = cir->baud_rate & 0xff; - cir_regs[port]->bdhr = (cir->baud_rate >> 8) & 0xff; - - /* set receiver control register */ - cir_regs[port]->rcr = (CIR_SET_RDWOS(cir->rdwos) | CIR_SET_RXDCR(cir->rxdcr)); - - /* set carrier frequency register */ - cir_regs[port]->cfr = (CIR_SET_CF(cir->cfq) | CIR_SET_HS(cir->hcfs)); - - /* set fifo threshold */ - data = cir_regs[port]->mstcr & 0xf3; - data |= CIR_SET_FIFO_TL(cir->fifo_tl); - cir_regs[port]->mstcr = data; - - clear_fifo(cir); - enable_receiver(cir); - disable_rx_demodulation(cir); - - set_rx_active(cir); - int_enable(cir); - rx_int_enable(cir); - - return 0; -} - - -void clear_fifo(struct cir_port *cir) -{ - cir_regs[cir->port]->mstcr |= CIR_FIFO_CLEAR; -} - -void enable_receiver(struct cir_port *cir) -{ - cir_regs[cir->port]->rcr |= CIR_RXEN; -} - -void disable_receiver(struct cir_port *cir) -{ - cir_regs[cir->port]->rcr &= ~CIR_RXEN; -} - -void enable_rx_demodulation(struct cir_port *cir) -{ - cir_regs[cir->port]->rcr |= CIR_RXEND; -} - -void disable_rx_demodulation(struct cir_port *cir) -{ - cir_regs[cir->port]->rcr &= ~CIR_RXEND; -} - -void set_rx_active(struct cir_port *cir) -{ - cir_regs[cir->port]->rcr |= CIR_RXACT; -} - -void int_enable(struct cir_port *cir) -{ - cir_regs[cir->port]->ier |= CIR_IEC; -} - -void rx_int_enable(struct cir_port *cir) -{ - cir_regs[cir->port]->ier |= CIR_RDAIE; -} - -void dump_regs(struct cir_port *cir) -{ - printk("mstcr %x ier %x iir %x cfr %x rcr %x tcr %x tfsr %x rfsr %x\n", - cir_regs[cir->port]->mstcr, - cir_regs[cir->port]->ier, - cir_regs[cir->port]->iir, - cir_regs[cir->port]->cfr, - cir_regs[cir->port]->rcr, - cir_regs[cir->port]->tcr, - cir_regs[cir->port]->tfsr, - cir_regs[cir->port]->rfsr); - - while (cir_regs[cir->port]->iir & CIR_RDAI) { - printk("data %x\n", cir_regs[cir->port]->dr); - } -} - -void dump_reg_addr(struct cir_port *cir) -{ - printk("dr %x mstcr %x ier %x iir %x cfr %x rcr %x tcr %x bdlr %x bdhr %x tfsr %x rfsr %x\n", - (unsigned)&cir_regs[cir->port]->dr, - (unsigned)&cir_regs[cir->port]->mstcr, - (unsigned)&cir_regs[cir->port]->ier, - (unsigned)&cir_regs[cir->port]->iir, - (unsigned)&cir_regs[cir->port]->cfr, - (unsigned)&cir_regs[cir->port]->rcr, - (unsigned)&cir_regs[cir->port]->tcr, - (unsigned)&cir_regs[cir->port]->bdlr, - (unsigned)&cir_regs[cir->port]->bdhr, - (unsigned)&cir_regs[cir->port]->tfsr, - (unsigned)&cir_regs[cir->port]->rfsr); -} - -int cir_get_rx_count(struct cir_port *cir) -{ - return cir_regs[cir->port]->rfsr & CIR_RXFBC_MASK; -} - -char cir_read_data(struct cir_port *cir) -{ - return cir_regs[cir->port]->dr; -} - -char get_int_status(struct cir_port *cir) -{ - return cir_regs[cir->port]->iir; -} -#endif diff --git a/arch/mips/ite-boards/generic/it8172_setup.c b/arch/mips/ite-boards/generic/it8172_setup.c deleted file mode 100644 index 07faf3cacff..00000000000 --- a/arch/mips/ite-boards/generic/it8172_setup.c +++ /dev/null @@ -1,352 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * IT8172/QED5231 board setup. - * - * Copyright 2000 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/irq.h> -#include <linux/serial_reg.h> -#include <linux/major.h> -#include <linux/kdev_t.h> -#include <linux/root_dev.h> -#include <linux/pm.h> - -#include <asm/cpu.h> -#include <asm/time.h> -#include <asm/io.h> -#include <asm/bootinfo.h> -#include <asm/irq.h> -#include <asm/mipsregs.h> -#include <asm/reboot.h> -#include <asm/traps.h> -#include <asm/it8172/it8172.h> -#include <asm/it8712.h> - -extern struct resource ioport_resource; -#ifdef CONFIG_SERIO_I8042 -int init_8712_keyboard(void); -#endif - -extern int SearchIT8712(void); -extern void InitLPCInterface(void); -extern char * __init prom_getcmdline(void); -extern void it8172_restart(char *command); -extern void it8172_halt(void); -extern void it8172_power_off(void); - -extern void it8172_time_init(void); - -#ifdef CONFIG_IT8172_REVC -struct { - struct resource ram; - struct resource pci_mem; - struct resource pci_io; - struct resource flash; - struct resource boot; -} it8172_resources = { - { - .start = 0, /* to be initted */ - .end = 0, - .name = "RAM", - .flags = IORESOURCE_MEM - }, { - .start = 0x10000000, - .end = 0x13FFFFFF, - .name = "PCI Mem", - .flags = IORESOURCE_MEM - }, { - .start = 0x14000000, - .end = 0x17FFFFFF - .name = "PCI I/O", - }, { - .start = 0x08000000, - .end = 0x0CFFFFFF - .name = "Flash", - }, { - .start = 0x1FC00000, - .end = 0x1FFFFFFF - .name = "Boot ROM", - } -}; -#else -struct { - struct resource ram; - struct resource pci_mem0; - struct resource pci_mem1; - struct resource pci_io; - struct resource pci_mem2; - struct resource pci_mem3; - struct resource flash; - struct resource boot; -} it8172_resources = { - { - .start = 0, /* to be initted */ - .end = 0, - .name = "RAM", - .flags = IORESOURCE_MEM - }, { - .start = 0x0C000000, - .end = 0x0FFFFFFF, - .name = "PCI Mem0", - .flags = IORESOURCE_MEM - }, { - .start = 0x10000000, - .end = 0x13FFFFFF, - .name = "PCI Mem1", - .flags = IORESOURCE_MEM - }, { - .start = 0x14000000, - .end = 0x17FFFFFF - .name = "PCI I/O", - }, { - .start = 0x1A000000, - .end = 0x1BFFFFFF, - .name = "PCI Mem2", - .flags = IORESOURCE_MEM - }, { - .start = 0x1C000000, - .end = 0x1FBFFFFF, - .name = "PCI Mem3", - .flags = IORESOURCE_MEM - }, { - .start = 0x08000000, - .end = 0x0CFFFFFF - .name = "Flash", - }, { - .start = 0x1FC00000, - .end = 0x1FFFFFFF - .name = "Boot ROM", - } -}; -#endif - - -void __init it8172_init_ram_resource(unsigned long memsize) -{ - it8172_resources.ram.end = memsize; -} - -void __init plat_mem_setup(void) -{ - unsigned short dsr; - char *argptr; - - argptr = prom_getcmdline(); -#ifdef CONFIG_SERIAL_CONSOLE - if ((argptr = strstr(argptr, "console=")) == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } -#endif - - clear_c0_status(ST0_FR); - - board_time_init = it8172_time_init; - - _machine_restart = it8172_restart; - _machine_halt = it8172_halt; - pm_power_off = it8172_power_off; - - /* - * IO/MEM resources. - * - * revisit this area. - */ - set_io_port_base(KSEG1); - ioport_resource.start = it8172_resources.pci_io.start; - ioport_resource.end = it8172_resources.pci_io.end; -#ifdef CONFIG_IT8172_REVC - iomem_resource.start = it8172_resources.pci_mem.start; - iomem_resource.end = it8172_resources.pci_mem.end; -#else - iomem_resource.start = it8172_resources.pci_mem0.start; - iomem_resource.end = it8172_resources.pci_mem3.end; -#endif - -#ifdef CONFIG_BLK_DEV_INITRD - ROOT_DEV = Root_RAM0; -#endif - - /* - * Pull enabled devices out of standby - */ - IT_IO_READ16(IT_PM_DSR, dsr); - - /* - * Fixme: This breaks when these drivers are modules!!! - */ -#ifdef CONFIG_SOUND_IT8172 - dsr &= ~IT_PM_DSR_ACSB; -#else - dsr |= IT_PM_DSR_ACSB; -#endif -#ifdef CONFIG_BLK_DEV_IT8172 - dsr &= ~IT_PM_DSR_IDESB; -#else - dsr |= IT_PM_DSR_IDESB; -#endif - IT_IO_WRITE16(IT_PM_DSR, dsr); - - InitLPCInterface(); - -#ifdef CONFIG_MIPS_ITE8172 - if (SearchIT8712()) { - printk("Found IT8712 Super IO\n"); - /* enable IT8712 serial port */ - LPCSetConfig(LDN_SERIAL1, 0x30, 0x01); /* enable */ - LPCSetConfig(LDN_SERIAL1, 0x23, 0x01); /* clock selection */ -#ifdef CONFIG_SERIO_I8042 - if (init_8712_keyboard()) { - printk("Unable to initialize keyboard\n"); - LPCSetConfig(LDN_KEYBOARD, 0x30, 0x0); /* disable keyboard */ - } else { - LPCSetConfig(LDN_KEYBOARD, 0x30, 0x1); /* enable keyboard */ - LPCSetConfig(LDN_KEYBOARD, 0xf0, 0x2); - LPCSetConfig(LDN_KEYBOARD, 0x71, 0x3); - - LPCSetConfig(LDN_MOUSE, 0x30, 0x1); /* enable mouse */ - - LPCSetConfig(0x4, 0x30, 0x1); - LPCSetConfig(0x4, 0xf4, LPCGetConfig(0x4, 0xf4) | 0x80); - - if ((LPCGetConfig(LDN_KEYBOARD, 0x30) == 0) || - (LPCGetConfig(LDN_MOUSE, 0x30) == 0)) - printk("Error: keyboard or mouse not enabled\n"); - - } -#endif - } - else { - printk("IT8712 Super IO not found\n"); - } -#endif - -#ifdef CONFIG_IT8172_CIR - { - unsigned long data; - //printk("Enabling CIR0\n"); - IT_IO_READ16(IT_PM_DSR, data); - data &= ~IT_PM_DSR_CIR0SB; - IT_IO_WRITE16(IT_PM_DSR, data); - //printk("DSR register: %x\n", (unsigned)IT_IO_READ16(IT_PM_DSR, data)); - } -#endif -#ifdef CONFIG_IT8172_SCR0 - { - unsigned i; - /* Enable Smart Card Reader 0 */ - /* First power it up */ - IT_IO_READ16(IT_PM_DSR, i); - i &= ~IT_PM_DSR_SCR0SB; - IT_IO_WRITE16(IT_PM_DSR, i); - /* Then initialize its registers */ - outb(( IT_SCR_SFR_GATE_UART_OFF << IT_SCR_SFR_GATE_UART_BIT - |IT_SCR_SFR_FET_CHARGE_213_US << IT_SCR_SFR_FET_CHARGE_BIT - |IT_SCR_SFR_CARD_FREQ_3_5_MHZ << IT_SCR_SFR_CARD_FREQ_BIT - |IT_SCR_SFR_FET_ACTIVE_INVERT << IT_SCR_SFR_FET_ACTIVE_BIT - |IT_SCR_SFR_ENABLE_ON << IT_SCR_SFR_ENABLE_BIT), - IT8172_PCI_IO_BASE + IT_SCR0_BASE + IT_SCR_SFR); - outb(IT_SCR_SCDR_RESET_MODE_ASYNC << IT_SCR_SCDR_RESET_MODE_BIT, - IT8172_PCI_IO_BASE + IT_SCR0_BASE + IT_SCR_SCDR); - } -#endif /* CONFIG_IT8172_SCR0 */ -#ifdef CONFIG_IT8172_SCR1 - { - unsigned i; - /* Enable Smart Card Reader 1 */ - /* First power it up */ - IT_IO_READ16(IT_PM_DSR, i); - i &= ~IT_PM_DSR_SCR1SB; - IT_IO_WRITE16(IT_PM_DSR, i); - /* Then initialize its registers */ - outb(( IT_SCR_SFR_GATE_UART_OFF << IT_SCR_SFR_GATE_UART_BIT - |IT_SCR_SFR_FET_CHARGE_213_US << IT_SCR_SFR_FET_CHARGE_BIT - |IT_SCR_SFR_CARD_FREQ_3_5_MHZ << IT_SCR_SFR_CARD_FREQ_BIT - |IT_SCR_SFR_FET_ACTIVE_INVERT << IT_SCR_SFR_FET_ACTIVE_BIT - |IT_SCR_SFR_ENABLE_ON << IT_SCR_SFR_ENABLE_BIT), - IT8172_PCI_IO_BASE + IT_SCR1_BASE + IT_SCR_SFR); - outb(IT_SCR_SCDR_RESET_MODE_ASYNC << IT_SCR_SCDR_RESET_MODE_BIT, - IT8172_PCI_IO_BASE + IT_SCR1_BASE + IT_SCR_SCDR); - } -#endif /* CONFIG_IT8172_SCR1 */ -} - -#ifdef CONFIG_SERIO_I8042 -/* - * According to the ITE Special BIOS Note for waking up the - * keyboard controller... - */ -static int init_8712_keyboard(void) -{ - unsigned int cmd_port = 0x14000064; - unsigned int data_port = 0x14000060; - ^^^^^^^^^^^ - Somebody here doesn't grok the concept of io ports. - - unsigned char data; - int i; - - outb(0xaa, cmd_port); /* send self-test cmd */ - i = 0; - while (!(inb(cmd_port) & 0x1)) { /* wait output buffer full */ - i++; - if (i > 0xffffff) - return 1; - } - - data = inb(data_port); - outb(0xcb, cmd_port); /* set ps2 mode */ - while (inb(cmd_port) & 0x2) { /* wait while input buffer full */ - i++; - if (i > 0xffffff) - return 1; - } - outb(0x01, data_port); - while (inb(cmd_port) & 0x2) { /* wait while input buffer full */ - i++; - if (i > 0xffffff) - return 1; - } - - outb(0x60, cmd_port); /* write 8042 command byte */ - while (inb(cmd_port) & 0x2) { /* wait while input buffer full */ - i++; - if (i > 0xffffff) - return 1; - } - outb(0x45, data_port); /* at interface, keyboard enabled, system flag */ - while (inb(cmd_port) & 0x2) { /* wait while input buffer full */ - i++; - if (i > 0xffffff) - return 1; - } - - outb(0xae, cmd_port); /* enable interface */ - return 0; -} -#endif diff --git a/arch/mips/ite-boards/generic/lpc.c b/arch/mips/ite-boards/generic/lpc.c deleted file mode 100644 index cc7584fbef8..00000000000 --- a/arch/mips/ite-boards/generic/lpc.c +++ /dev/null @@ -1,144 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * ITE Semi IT8712 Super I/O functions. - * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <asm/io.h> -#include <asm/types.h> -#include <asm/it8712.h> -#include <asm/it8172/it8172.h> - -#ifndef TRUE -#define TRUE 1 -#endif - -#ifndef FALSE -#define FALSE 0 -#endif - -void LPCEnterMBPnP(void) -{ - int i; - unsigned char key[4] = {0x87, 0x01, 0x55, 0x55}; - - for (i = 0; i<4; i++) - outb(key[i], LPC_KEY_ADDR); - -} - -void LPCExitMBPnP(void) -{ - outb(0x02, LPC_KEY_ADDR); - outb(0x02, LPC_DATA_ADDR); -} - -void LPCSetConfig(char LdnNumber, char Index, char data) -{ - LPCEnterMBPnP(); // Enter IT8712 MB PnP mode - outb(0x07, LPC_KEY_ADDR); - outb(LdnNumber, LPC_DATA_ADDR); - outb(Index, LPC_KEY_ADDR); - outb(data, LPC_DATA_ADDR); - LPCExitMBPnP(); -} - -char LPCGetConfig(char LdnNumber, char Index) -{ - char rtn; - - LPCEnterMBPnP(); // Enter IT8712 MB PnP mode - outb(0x07, LPC_KEY_ADDR); - outb(LdnNumber, LPC_DATA_ADDR); - outb(Index, LPC_KEY_ADDR); - rtn = inb(LPC_DATA_ADDR); - LPCExitMBPnP(); - return rtn; -} - -int SearchIT8712(void) -{ - unsigned char Id1, Id2; - unsigned short Id; - - LPCEnterMBPnP(); - outb(0x20, LPC_KEY_ADDR); /* chip id byte 1 */ - Id1 = inb(LPC_DATA_ADDR); - outb(0x21, LPC_KEY_ADDR); /* chip id byte 2 */ - Id2 = inb(LPC_DATA_ADDR); - Id = (Id1 << 8) | Id2; - LPCExitMBPnP(); - if (Id == 0x8712) - return TRUE; - else - return FALSE; -} - -void InitLPCInterface(void) -{ - unsigned char bus, dev_fn; - unsigned long data; - - bus = 0; - dev_fn = 1<<3 | 4; - - - /* pci cmd, SERR# Enable */ - IT_WRITE(IT_CONFADDR, - (bus << IT_BUSNUM_SHF) | - (dev_fn << IT_FUNCNUM_SHF) | - ((0x4 / 4) << IT_REGNUM_SHF)); - IT_READ(IT_CONFDATA, data); - data |= 0x0100; - IT_WRITE(IT_CONFADDR, - (bus << IT_BUSNUM_SHF) | - (dev_fn << IT_FUNCNUM_SHF) | - ((0x4 / 4) << IT_REGNUM_SHF)); - IT_WRITE(IT_CONFDATA, data); - - /* setup serial irq control register */ - IT_WRITE(IT_CONFADDR, - (bus << IT_BUSNUM_SHF) | - (dev_fn << IT_FUNCNUM_SHF) | - ((0x48 / 4) << IT_REGNUM_SHF)); - IT_READ(IT_CONFDATA, data); - data = (data & 0xffff00ff) | 0xc400; - IT_WRITE(IT_CONFADDR, - (bus << IT_BUSNUM_SHF) | - (dev_fn << IT_FUNCNUM_SHF) | - ((0x48 / 4) << IT_REGNUM_SHF)); - IT_WRITE(IT_CONFDATA, data); - - - /* Enable I/O Space Subtractive Decode */ - /* default 0x4C is 0x3f220000 */ - IT_WRITE(IT_CONFADDR, - (bus << IT_BUSNUM_SHF) | - (dev_fn << IT_FUNCNUM_SHF) | - ((0x4C / 4) << IT_REGNUM_SHF)); - IT_WRITE(IT_CONFDATA, 0x3f2200f3); -} diff --git a/arch/mips/ite-boards/generic/pmon_prom.c b/arch/mips/ite-boards/generic/pmon_prom.c deleted file mode 100644 index 7d0a79be34d..00000000000 --- a/arch/mips/ite-boards/generic/pmon_prom.c +++ /dev/null @@ -1,135 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * PROM library initialisation code, assuming a version of - * pmon is the boot code. - * - * Copyright 2000 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * This file was derived from Carsten Langgaard's - * arch/mips/mips-boards/xx files. - * - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/string.h> - -#include <asm/bootinfo.h> - -extern int prom_argc; -extern char **prom_argv, **prom_envp; - -typedef struct -{ - char *name; -/* char *val; */ -}t_env_var; - - -char * __init prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); -} - -void __init prom_init_cmdline(void) -{ - char *cp; - int actr; - - actr = 1; /* Always ignore argv[0] */ - - cp = &(arcs_cmdline[0]); - while(actr < prom_argc) { - strcpy(cp, prom_argv[actr]); - cp += strlen(prom_argv[actr]); - *cp++ = ' '; - actr++; - } - if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */ - --cp; - *cp = '\0'; - -} - - -char *prom_getenv(char *envname) -{ - /* - * Return a pointer to the given environment variable. - * Environment variables are stored in the form of "memsize=64". - */ - - t_env_var *env = (t_env_var *)prom_envp; - int i; - - i = strlen(envname); - - while(env->name) { - if(strncmp(envname, env->name, i) == 0) { - return(env->name + strlen(envname) + 1); - } - env++; - } - return(NULL); -} - -static inline unsigned char str2hexnum(unsigned char c) -{ - if(c >= '0' && c <= '9') - return c - '0'; - if(c >= 'a' && c <= 'f') - return c - 'a' + 10; - return 0; /* foo */ -} - -unsigned long __init prom_free_prom_memory(void) -{ - return 0; -} - -unsigned long __init prom_get_memsize(void) -{ - char *memsize_str; - unsigned int memsize; - - memsize_str = prom_getenv("memsize"); - if (!memsize_str) { -#ifdef CONFIG_MIPS_ITE8172 - memsize = 32; -#elif defined(CONFIG_MIPS_IVR) - memsize = 64; -#else - memsize = 8; -#endif - printk("memsize unknown: setting to %dMB\n", memsize); - } else { - printk("memsize: %s\n", memsize_str); - memsize = simple_strtol(memsize_str, NULL, 0); - } - return memsize; -} diff --git a/arch/mips/ite-boards/generic/puts.c b/arch/mips/ite-boards/generic/puts.c deleted file mode 100644 index 20b02df6b41..00000000000 --- a/arch/mips/ite-boards/generic/puts.c +++ /dev/null @@ -1,139 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Low level uart routines to directly access a 16550 uart. - * - * Copyright 2000,2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/types.h> - -#define SERIAL_BASE 0xB4011800 /* it8172 */ -#define SER_CMD 5 -#define SER_DATA 0x00 -#define TX_BUSY 0x20 - -#define TIMEOUT 0xffff -#undef SLOW_DOWN - -static const char digits[16] = "0123456789abcdef"; -static volatile unsigned char *const com1 = (unsigned char *) SERIAL_BASE; - - -#ifdef SLOW_DOWN -static inline void slow_down() -{ - int k; - for (k = 0; k < 10000; k++); -} -#else -#define slow_down() -#endif - -void putch(const unsigned char c) -{ - unsigned char ch; - int i = 0; - - do { - ch = com1[SER_CMD]; - slow_down(); - i++; - if (i > TIMEOUT) { - break; - } - } while (0 == (ch & TX_BUSY)); - com1[SER_DATA] = c; -} - -void puts(unsigned char *cp) -{ - unsigned char ch; - int i = 0; - - while (*cp) { - do { - ch = com1[SER_CMD]; - slow_down(); - i++; - if (i > TIMEOUT) { - break; - } - } while (0 == (ch & TX_BUSY)); - com1[SER_DATA] = *cp++; - } - putch('\r'); - putch('\n'); -} - -void fputs(unsigned char *cp) -{ - unsigned char ch; - int i = 0; - - while (*cp) { - - do { - ch = com1[SER_CMD]; - slow_down(); - i++; - if (i > TIMEOUT) { - break; - } - } while (0 == (ch & TX_BUSY)); - com1[SER_DATA] = *cp++; - } -} - - -void put64(uint64_t ul) -{ - int cnt; - unsigned ch; - - cnt = 16; /* 16 nibbles in a 64 bit long */ - putch('0'); - putch('x'); - do { - cnt--; - ch = (unsigned char) (ul >> cnt * 4) & 0x0F; - putch(digits[ch]); - } while (cnt > 0); -} - -void put32(unsigned u) -{ - int cnt; - unsigned ch; - - cnt = 8; /* 8 nibbles in a 32 bit long */ - putch('0'); - putch('x'); - do { - cnt--; - ch = (unsigned char) (u >> cnt * 4) & 0x0F; - putch(digits[ch]); - } while (cnt > 0); -} diff --git a/arch/mips/ite-boards/generic/reset.c b/arch/mips/ite-boards/generic/reset.c deleted file mode 100644 index 03bd5ba8c91..00000000000 --- a/arch/mips/ite-boards/generic/reset.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * ITE 8172 reset routines. - * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/sched.h> -#include <linux/mm.h> -#include <asm/cacheflush.h> -#include <asm/io.h> -#include <asm/processor.h> -#include <asm/reboot.h> -#include <asm/system.h> - -void it8172_restart() -{ - set_c0_status(ST0_BEV | ST0_ERL); - change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED); - flush_cache_all(); - write_c0_wired(0); - __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000)); -} - -void it8172_halt(void) -{ - printk(KERN_NOTICE "\n** You can safely turn off the power\n"); - while (1) - __asm__(".set\tmips3\n\t" - "wait\n\t" - ".set\tmips0"); -} - -void it8172_power_off(void) -{ - it8172_halt(); -} diff --git a/arch/mips/ite-boards/generic/time.c b/arch/mips/ite-boards/generic/time.c deleted file mode 100644 index 3dc55569ff7..00000000000 --- a/arch/mips/ite-boards/generic/time.c +++ /dev/null @@ -1,249 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * Copyright (C) 2003 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * Setting up the clock on the MIPS boards. - */ -#include <linux/init.h> -#include <linux/kernel_stat.h> -#include <linux/sched.h> -#include <linux/time.h> -#include <linux/spinlock.h> -#include <linux/mc146818rtc.h> - -#include <asm/time.h> -#include <asm/mipsregs.h> -#include <asm/ptrace.h> -#include <asm/it8172/it8172.h> -#include <asm/it8172/it8172_int.h> -#include <asm/debug.h> - -#define IT8172_RTC_ADR_REG (IT8172_PCI_IO_BASE + IT_RTC_BASE) -#define IT8172_RTC_DAT_REG (IT8172_RTC_ADR_REG + 1) -#define IT8172_RTC_CENTURY_REG (IT8172_PCI_IO_BASE + IT_RTC_CENTURY) - -static volatile char *rtc_adr_reg = (char*)KSEG1ADDR(IT8172_RTC_ADR_REG); -static volatile char *rtc_dat_reg = (char*)KSEG1ADDR(IT8172_RTC_DAT_REG); -static volatile char *rtc_century_reg = (char*)KSEG1ADDR(IT8172_RTC_CENTURY_REG); - -unsigned char it8172_rtc_read_data(unsigned long addr) -{ - unsigned char retval; - - *rtc_adr_reg = addr; - retval = *rtc_dat_reg; - return retval; -} - -void it8172_rtc_write_data(unsigned char data, unsigned long addr) -{ - *rtc_adr_reg = addr; - *rtc_dat_reg = data; -} - -#undef CMOS_READ -#undef CMOS_WRITE -#define CMOS_READ(addr) it8172_rtc_read_data(addr) -#define CMOS_WRITE(data, addr) it8172_rtc_write_data(data, addr) - -static unsigned char saved_control; /* remember rtc control reg */ -static inline int rtc_24h(void) { return saved_control & RTC_24H; } -static inline int rtc_dm_binary(void) { return saved_control & RTC_DM_BINARY; } - -static inline unsigned char -bin_to_hw(unsigned char c) -{ - if (rtc_dm_binary()) - return c; - else - return ((c/10) << 4) + (c%10); -} - -static inline unsigned char -hw_to_bin(unsigned char c) -{ - if (rtc_dm_binary()) - return c; - else - return (c>>4)*10 + (c &0xf); -} - -/* 0x80 bit indicates pm in 12-hour format */ -static inline unsigned char -hour_bin_to_hw(unsigned char c) -{ - if (rtc_24h()) - return bin_to_hw(c); - if (c >= 12) - return 0x80 | bin_to_hw((c==12)?12:c-12); /* 12 is 12pm */ - else - return bin_to_hw((c==0)?12:c); /* 0 is 12 AM, not 0 am */ -} - -static inline unsigned char -hour_hw_to_bin(unsigned char c) -{ - unsigned char tmp = hw_to_bin(c&0x3f); - if (rtc_24h()) - return tmp; - if (c & 0x80) - return (tmp==12)?12:tmp+12; /* 12pm is 12, not 24 */ - else - return (tmp==12)?0:tmp; /* 12am is 0 */ -} - -static unsigned long r4k_offset; /* Amount to increment compare reg each time */ -static unsigned long r4k_cur; /* What counter should be at next timer irq */ -extern unsigned int mips_hpt_frequency; - -/* - * Figure out the r4k offset, the amount to increment the compare - * register for each time tick. - * Use the RTC to calculate offset. - */ -static unsigned long __init cal_r4koff(void) -{ - unsigned int flags; - - local_irq_save(flags); - - /* Start counter exactly on falling edge of update flag */ - while (CMOS_READ(RTC_REG_A) & RTC_UIP); - while (!(CMOS_READ(RTC_REG_A) & RTC_UIP)); - - /* Start r4k counter. */ - write_c0_count(0); - - /* Read counter exactly on falling edge of update flag */ - while (CMOS_READ(RTC_REG_A) & RTC_UIP); - while (!(CMOS_READ(RTC_REG_A) & RTC_UIP)); - - mips_hpt_frequency = read_c0_count(); - - /* restore interrupts */ - local_irq_restore(flags); - - return (mips_hpt_frequency / HZ); -} - -static unsigned long -it8172_rtc_get_time(void) -{ - unsigned int year, mon, day, hour, min, sec; - unsigned int flags; - - /* avoid update-in-progress. */ - for (;;) { - local_irq_save(flags); - if (! (CMOS_READ(RTC_REG_A) & RTC_UIP)) - break; - /* don't hold intr closed all the time */ - local_irq_restore(flags); - } - - /* Read regs. */ - sec = hw_to_bin(CMOS_READ(RTC_SECONDS)); - min = hw_to_bin(CMOS_READ(RTC_MINUTES)); - hour = hour_hw_to_bin(CMOS_READ(RTC_HOURS)); - day = hw_to_bin(CMOS_READ(RTC_DAY_OF_MONTH)); - mon = hw_to_bin(CMOS_READ(RTC_MONTH)); - year = hw_to_bin(CMOS_READ(RTC_YEAR)) + - hw_to_bin(*rtc_century_reg) * 100; - - /* restore interrupts */ - local_irq_restore(flags); - - return mktime(year, mon, day, hour, min, sec); -} - -static int -it8172_rtc_set_time(unsigned long t) -{ - struct rtc_time tm; - unsigned int flags; - - /* convert */ - to_tm(t, &tm); - - /* avoid update-in-progress. */ - for (;;) { - local_irq_save(flags); - if (! (CMOS_READ(RTC_REG_A) & RTC_UIP)) - break; - /* don't hold intr closed all the time */ - local_irq_restore(flags); - } - - *rtc_century_reg = bin_to_hw(tm.tm_year/100); - CMOS_WRITE(bin_to_hw(tm.tm_sec), RTC_SECONDS); - CMOS_WRITE(bin_to_hw(tm.tm_min), RTC_MINUTES); - CMOS_WRITE(hour_bin_to_hw(tm.tm_hour), RTC_HOURS); - CMOS_WRITE(bin_to_hw(tm.tm_mday), RTC_DAY_OF_MONTH); - CMOS_WRITE(bin_to_hw(tm.tm_mon+1), RTC_MONTH); /* tm_mon starts from 0 */ - CMOS_WRITE(bin_to_hw(tm.tm_year%100), RTC_YEAR); - - /* restore interrupts */ - local_irq_restore(flags); - - return 0; -} - -void __init it8172_time_init(void) -{ - unsigned int est_freq, flags; - - local_irq_save(flags); - - saved_control = CMOS_READ(RTC_CONTROL); - - printk("calculating r4koff... "); - r4k_offset = cal_r4koff(); - printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset); - - est_freq = 2*r4k_offset*HZ; - est_freq += 5000; /* round */ - est_freq -= est_freq%10000; - printk("CPU frequency %d.%02d MHz\n", est_freq/1000000, - (est_freq%1000000)*100/1000000); - - local_irq_restore(flags); - - rtc_mips_get_time = it8172_rtc_get_time; - rtc_mips_set_time = it8172_rtc_set_time; -} - -#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5) - -void __init plat_timer_setup(struct irqaction *irq) -{ - puts("timer_setup\n"); - put32(NR_IRQS); - puts(""); - /* we are using the cpu counter for timer interrupts */ - setup_irq(MIPS_CPU_TIMER_IRQ, irq); - - /* to generate the first timer interrupt */ - r4k_cur = (read_c0_count() + r4k_offset); - write_c0_compare(r4k_cur); - set_c0_status(ALLINTS); -} diff --git a/arch/mips/ite-boards/ivr/Makefile b/arch/mips/ite-boards/ivr/Makefile deleted file mode 100644 index e4fa6042b47..00000000000 --- a/arch/mips/ite-boards/ivr/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# Copyright 2000 MontaVista Software Inc. -# Author: MontaVista Software, Inc. -# ppopov@mvista.com or source@mvista.com -# -# Makefile for the Globespan IVR board, -# board-specific files. -# - -obj-y += init.o diff --git a/arch/mips/ite-boards/ivr/README b/arch/mips/ite-boards/ivr/README deleted file mode 100644 index aa7d8db855b..00000000000 --- a/arch/mips/ite-boards/ivr/README +++ /dev/null @@ -1,3 +0,0 @@ -This is not really a board made by ITE Semi, but it's very -similar to the ITE QED-4N-S01B board. The IVR board is made -by Globespan and it's a reference board for the PVR chip. diff --git a/arch/mips/ite-boards/ivr/init.c b/arch/mips/ite-boards/ivr/init.c deleted file mode 100644 index 05cf9218c43..00000000000 --- a/arch/mips/ite-boards/ivr/init.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * IVR board setup. - * - * Copyright 2000 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/bootmem.h> -#include <asm/addrspace.h> -#include <asm/bootinfo.h> -#include <linux/string.h> -#include <linux/kernel.h> -#include <asm/sections.h> -#include <asm/it8172/it8172.h> -#include <asm/it8172/it8172_dbg.h> - -int prom_argc; -char **prom_argv, **prom_envp; - -extern void __init prom_init_cmdline(void); -extern unsigned long __init prom_get_memsize(void); -extern void __init it8172_init_ram_resource(unsigned long memsize); - -const char *get_system_type(void) -{ - return "Globespan IVR"; -} - -void __init prom_init(void) -{ - unsigned long mem_size; - unsigned long pcicr; - - prom_argc = fw_arg0; - prom_argv = (char **) fw_arg1; - prom_envp = (int *) fw_arg3; - - mips_machgroup = MACH_GROUP_GLOBESPAN; - mips_machtype = MACH_IVR; /* Globespan's iTVC15 reference board */ - - prom_init_cmdline(); - - /* pmon does not set memsize */ - mem_size = prom_get_memsize(); - mem_size = mem_size << 20; - - /* - * make the entire physical memory visible to pci bus masters - */ - IT_READ(IT_MC_PCICR, pcicr); - pcicr &= ~0x1f; - pcicr |= (mem_size - 1) >> 22; - IT_WRITE(IT_MC_PCICR, pcicr); - - it8172_init_ram_resource(mem_size); - add_memory_region(0, mem_size, BOOT_MEM_RAM); -} diff --git a/arch/mips/ite-boards/qed-4n-s01b/Makefile b/arch/mips/ite-boards/qed-4n-s01b/Makefile deleted file mode 100644 index bb9972ad9c4..00000000000 --- a/arch/mips/ite-boards/qed-4n-s01b/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# Copyright 2000 MontaVista Software Inc. -# Author: MontaVista Software, Inc. -# ppopov@mvista.com or source@mvista.com -# -# Makefile for the ITE 8172 (qed-4n-s01b) board, board -# specific files. -# - -obj-y := init.o diff --git a/arch/mips/ite-boards/qed-4n-s01b/README b/arch/mips/ite-boards/qed-4n-s01b/README deleted file mode 100644 index fb4b5197e80..00000000000 --- a/arch/mips/ite-boards/qed-4n-s01b/README +++ /dev/null @@ -1,2 +0,0 @@ -This is an ITE (www.iteusa.com) eval board for the ITE 8172G -system controller, with a QED 5231 CPU. diff --git a/arch/mips/ite-boards/qed-4n-s01b/init.c b/arch/mips/ite-boards/qed-4n-s01b/init.c deleted file mode 100644 index ea2a754cafe..00000000000 --- a/arch/mips/ite-boards/qed-4n-s01b/init.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * IT8172/QED5231 board setup. - * - * Copyright 2000 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/bootmem.h> -#include <asm/addrspace.h> -#include <asm/bootinfo.h> -#include <linux/string.h> -#include <linux/kernel.h> -#include <asm/sections.h> -#include <asm/it8172/it8172.h> -#include <asm/it8172/it8172_dbg.h> - -int prom_argc; -char **prom_argv, **prom_envp; - -extern void __init prom_init_cmdline(void); -extern unsigned long __init prom_get_memsize(void); -extern void __init it8172_init_ram_resource(unsigned long memsize); - -const char *get_system_type(void) -{ - return "ITE QED-4N-S01B"; -} - -void __init prom_init(void) -{ - unsigned long mem_size; - unsigned long pcicr; - - prom_argc = fw_arg0; - prom_argv = (char **) fw_arg1; - prom_envp = (int *) fw_arg3; - - mips_machgroup = MACH_GROUP_ITE; - mips_machtype = MACH_QED_4N_S01B; /* ITE board name/number */ - - prom_init_cmdline(); - mem_size = prom_get_memsize(); - - printk("Memory size: %dMB\n", (unsigned)mem_size); - - mem_size <<= 20; /* MB */ - - /* - * make the entire physical memory visible to pci bus masters - */ - IT_READ(IT_MC_PCICR, pcicr); - pcicr &= ~0x1f; - pcicr |= (mem_size - 1) >> 22; - IT_WRITE(IT_MC_PCICR, pcicr); - - it8172_init_ram_resource(mem_size); - add_memory_region(0, mem_size, BOOT_MEM_RAM); -} diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index 845c7e55505..a8340802f2d 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -149,80 +149,6 @@ void (*mips_timer_ack)(void); unsigned int (*mips_hpt_read)(void); void (*mips_hpt_init)(unsigned int); - -/* - * This version of gettimeofday has microsecond resolution and better than - * microsecond precision on fast machines with cycle counter. - */ -void do_gettimeofday(struct timeval *tv) -{ - unsigned long seq; - unsigned long usec, sec; - unsigned long max_ntp_tick; - - do { - seq = read_seqbegin(&xtime_lock); - - usec = do_gettimeoffset(); - - /* - * If time_adjust is negative then NTP is slowing the clock - * so make sure not to go into next possible interval. - * Better to lose some accuracy than have time go backwards.. - */ - if (unlikely(time_adjust < 0)) { - max_ntp_tick = (USEC_PER_SEC / HZ) - tickadj; - usec = min(usec, max_ntp_tick); - } - - sec = xtime.tv_sec; - usec += (xtime.tv_nsec / 1000); - - } while (read_seqretry(&xtime_lock, seq)); - - while (usec >= 1000000) { - usec -= 1000000; - sec++; - } - - tv->tv_sec = sec; - tv->tv_usec = usec; -} - -EXPORT_SYMBOL(do_gettimeofday); - -int do_settimeofday(struct timespec *tv) -{ - time_t wtm_sec, sec = tv->tv_sec; - long wtm_nsec, nsec = tv->tv_nsec; - - if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) - return -EINVAL; - - write_seqlock_irq(&xtime_lock); - - /* - * This is revolting. We need to set "xtime" correctly. However, - * the value in this location is the value at the most recent update - * of wall time. Discover what correction gettimeofday() would have - * made, and then undo it! - */ - nsec -= do_gettimeoffset() * NSEC_PER_USEC; - - wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); - wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); - - set_normalized_timespec(&xtime, sec, nsec); - set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - - ntp_clear(); - write_sequnlock_irq(&xtime_lock); - clock_was_set(); - return 0; -} - -EXPORT_SYMBOL(do_settimeofday); - /* * Gettimeoffset routines. These routines returns the time duration * since last timer interrupt in usecs. diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 5b06349af2d..88b72c9a849 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -163,10 +163,10 @@ static int __init page_is_ram(unsigned long pagenr) void __init paging_init(void) { - unsigned long zones_size[] = { 0, }; + unsigned long zones_size[MAX_NR_ZONES] = { 0, }; unsigned long max_dma, high, low; #ifndef CONFIG_FLATMEM - unsigned long zholes_size[] = { 0, }; + unsigned long zholes_size[MAX_NR_ZONES] = { 0, }; unsigned long i, j, pfn; #endif diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index edefa97b233..3cf0dd4ba54 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -7,7 +7,6 @@ obj-y += pci.o # # PCI bus host bridge specific code # -obj-$(CONFIG_ITE_BOARD_GEN) += ops-it8172.o obj-$(CONFIG_MIPS_BONITO64) += ops-bonito64.o obj-$(CONFIG_MIPS_GT64111) += ops-gt64111.o obj-$(CONFIG_MIPS_GT64120) += ops-gt64120.o @@ -28,8 +27,6 @@ obj-$(CONFIG_LASAT) += pci-lasat.o obj-$(CONFIG_MIPS_ATLAS) += fixup-atlas.o obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o obj-$(CONFIG_MIPS_EV64120) += fixup-ev64120.o -obj-$(CONFIG_MIPS_ITE8172) += fixup-ite8172g.o -obj-$(CONFIG_MIPS_IVR) += fixup-ivr.o obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o diff --git a/arch/mips/pci/fixup-ite8172g.c b/arch/mips/pci/fixup-ite8172g.c deleted file mode 100644 index 2290ea4228d..00000000000 --- a/arch/mips/pci/fixup-ite8172g.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Board specific pci fixups. - * - * Copyright 2000 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/it8172/it8172.h> -#include <asm/it8172/it8172_pci.h> -#include <asm/it8172/it8172_int.h> - -/* - * Shortcuts - */ -#define INTA IT8172_PCI_INTA_IRQ -#define INTB IT8172_PCI_INTB_IRQ -#define INTC IT8172_PCI_INTC_IRQ -#define INTD IT8172_PCI_INTD_IRQ - -static const int internal_func_irqs[7] __initdata = { - IT8172_AC97_IRQ, - IT8172_DMA_IRQ, - IT8172_CDMA_IRQ, - IT8172_USB_IRQ, - IT8172_BRIDGE_MASTER_IRQ, - IT8172_IDE_IRQ, - IT8172_MC68K_IRQ -}; - -static char irq_tab_ite8172g[][5] __initdata = { - [0x10] = { 0, INTA, INTB, INTC, INTD }, - [0x11] = { 0, INTA, INTB, INTC, INTD }, - [0x12] = { 0, INTB, INTC, INTD, INTA }, - [0x13] = { 0, INTC, INTD, INTA, INTB }, - [0x14] = { 0, INTD, INTA, INTB, INTC }, -}; - -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - /* - * Internal device 1 is actually 7 different internal devices on the - * IT8172G (a multifunction device). - */ - if (slot == 1) - return internal_func_irqs[PCI_FUNC(dev->devfn)]; - - return irq_tab_ite8172g[slot][pin]; -} - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} diff --git a/arch/mips/pci/fixup-ivr.c b/arch/mips/pci/fixup-ivr.c deleted file mode 100644 index 0c7c16464c1..00000000000 --- a/arch/mips/pci/fixup-ivr.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Globespan IVR board-specific pci fixups. - * - * Copyright 2000 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/it8172/it8172.h> -#include <asm/it8172/it8172_pci.h> -#include <asm/it8172/it8172_int.h> - -/* - * Shortcuts - */ -#define INTA IT8172_PCI_INTA_IRQ -#define INTB IT8172_PCI_INTB_IRQ -#define INTC IT8172_PCI_INTC_IRQ -#define INTD IT8172_PCI_INTD_IRQ - -static const int internal_func_irqs[7] __initdata = { - IT8172_AC97_IRQ, - IT8172_DMA_IRQ, - IT8172_CDMA_IRQ, - IT8172_USB_IRQ, - IT8172_BRIDGE_MASTER_IRQ, - IT8172_IDE_IRQ, - IT8172_MC68K_IRQ -}; - -static char irq_tab_ivr[][5] __initdata = { - [0x11] = { INTC, INTC, INTD, INTA, INTB }, /* Realtek RTL-8139 */ - [0x12] = { INTB, INTB, INTB, INTC, INTC }, /* IVR slot */ - [0x13] = { INTA, INTA, INTB, INTC, INTD } /* Expansion slot */ -}; - -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - if (slot == 1) - return internal_func_irqs[PCI_FUNC(dev->devfn)]; - - return irq_tab_ivr[slot][pin]; -} - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} diff --git a/arch/mips/pci/fixup-sb1250.c b/arch/mips/pci/fixup-sb1250.c index 13791b78e59..7a7444874e8 100644 --- a/arch/mips/pci/fixup-sb1250.c +++ b/arch/mips/pci/fixup-sb1250.c @@ -1,7 +1,7 @@ /* * arch/mips/pci/fixup-sb1250.c * - * Copyright (C) 2004 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2004, 2006 MIPS Technologies, Inc. All rights reserved. * Author: Maciej W. Rozycki <macro@mips.com> * * This program is free software; you can redistribute it and/or @@ -14,6 +14,17 @@ #include <linux/pci.h> /* + * Set the the BCM1250, etc. PCI host bridge's TRDY timeout + * to the finite max. + */ +static void __init quirk_sb1250_pci(struct pci_dev *dev) +{ + pci_write_config_byte(dev, 0x40, 0xff); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIBYTE, PCI_DEVICE_ID_BCM1250_PCI, + quirk_sb1250_pci); + +/* * The BCM1250, etc. PCI/HT bridge reports as a host bridge. */ static void __init quirk_sb1250_ht(struct pci_dev *dev) @@ -22,3 +33,13 @@ static void __init quirk_sb1250_ht(struct pci_dev *dev) } DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIBYTE, PCI_DEVICE_ID_BCM1250_HT, quirk_sb1250_ht); + +/* + * Set the the SP1011 HT/PCI bridge's TRDY timeout to the finite max. + */ +static void __init quirk_sp1011(struct pci_dev *dev) +{ + pci_write_config_byte(dev, 0x64, 0xff); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIPACKETS, PCI_DEVICE_ID_SP1011, + quirk_sp1011); diff --git a/arch/mips/pci/ops-it8172.c b/arch/mips/pci/ops-it8172.c deleted file mode 100644 index ba8328505a0..00000000000 --- a/arch/mips/pci/ops-it8172.c +++ /dev/null @@ -1,213 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * IT8172 system controller specific pci support. - * - * Copyright 2000 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/it8172/it8172.h> -#include <asm/it8172/it8172_pci.h> - -#define PCI_ACCESS_READ 0 -#define PCI_ACCESS_WRITE 1 - -#undef DEBUG -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif - -static struct resource pci_mem_resource_1; - -static struct resource pci_io_resource = { - .start = 0x14018000, - .end = 0x17FFFFFF, - .name = "io pci IO space", - .flags = IORESOURCE_IO -}; - -static struct resource pci_mem_resource_0 = { - .start = 0x10101000, - .end = 0x13FFFFFF, - .name = "ext pci memory space 0/1", - .flags = IORESOURCE_MEM, - .parent = &pci_mem_resource_0, - .sibling = NULL, - .child = &pci_mem_resource_1 -}; - -static struct resource pci_mem_resource_1 = { - .start = 0x1A000000, - .end = 0x1FBFFFFF, - .name = "ext pci memory space 2/3", - .flags = IORESOURCE_MEM, - .parent = &pci_mem_resource_0 -}; - -extern struct pci_ops it8172_pci_ops; - -struct pci_controller it8172_controller = { - .pci_ops = &it8172_pci_ops, - .io_resource = &pci_io_resource, - .mem_resource = &pci_mem_resource_0, -}; - -static int it8172_pcibios_config_access(unsigned char access_type, - struct pci_bus *bus, - unsigned int devfn, int where, - u32 * data) -{ - /* - * config cycles are on 4 byte boundary only - */ - - /* Setup address */ - IT_WRITE(IT_CONFADDR, (bus->number << IT_BUSNUM_SHF) | - (devfn << IT_FUNCNUM_SHF) | (where & ~0x3)); - - if (access_type == PCI_ACCESS_WRITE) { - IT_WRITE(IT_CONFDATA, *data); - } else { - IT_READ(IT_CONFDATA, *data); - } - - /* - * Revisit: check for master or target abort. - */ - return 0; -} - - -/* - * We can't address 8 and 16 bit words directly. Instead we have to - * read/write a 32bit word and mask/modify the data we actually want. - */ -static write_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 val) -{ - u32 data = 0; - - switch (size) { - case 1: - if (it8172_pcibios_config_access - (PCI_ACCESS_READ, dev, where, &data)) - return -1; - - *val = (data >> ((where & 3) << 3)) & 0xff; - - return PCIBIOS_SUCCESSFUL; - - case 2: - - if (where & 1) - return PCIBIOS_BAD_REGISTER_NUMBER; - - if (it8172_pcibios_config_access - (PCI_ACCESS_READ, dev, where, &data)) - return -1; - - *val = (data >> ((where & 3) << 3)) & 0xffff; - DBG("cfg read word: bus %d dev_fn %x where %x: val %x\n", - dev->bus->number, dev->devfn, where, *val); - - return PCIBIOS_SUCCESSFUL; - - case 4: - - if (where & 3) - return PCIBIOS_BAD_REGISTER_NUMBER; - - if (it8172_pcibios_config_access - (PCI_ACCESS_READ, dev, where, &data)) - return -1; - - *val = data; - - return PCIBIOS_SUCCESSFUL; - } -} - - -static write_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 val) -{ - u32 data = 0; - - switch (size) { - case 1: - if (it8172_pcibios_config_access - (PCI_ACCESS_READ, dev, where, &data)) - return -1; - - data = (data & ~(0xff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - - if (it8172_pcibios_config_access - (PCI_ACCESS_WRITE, dev, where, &data)) - return -1; - - return PCIBIOS_SUCCESSFUL; - - case 2: - if (where & 1) - return PCIBIOS_BAD_REGISTER_NUMBER; - - if (it8172_pcibios_config_access - (PCI_ACCESS_READ, dev, where, &data)) - eturn - 1; - - data = (data & ~(0xffff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - - if (it8172_pcibios_config_access - (PCI_ACCESS_WRITE, dev, where, &data)) - return -1; - - return PCIBIOS_SUCCESSFUL; - - case 4: - if (where & 3) - return PCIBIOS_BAD_REGISTER_NUMBER; - - if (it8172_pcibios_config_access - (PCI_ACCESS_WRITE, dev, where, &val)) - return -1; - - return PCIBIOS_SUCCESSFUL; - } -} - -struct pci_ops it8172_pci_ops = { - .read = read_config, - .write = write_config, -}; diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c index a0222fa4416..a46b75b23ec 100644 --- a/arch/mips/sibyte/bcm1480/irq.c +++ b/arch/mips/sibyte/bcm1480/irq.c @@ -482,7 +482,7 @@ asmlinkage void plat_irq_dispatch(struct pt_regs *regs) write_c0_compare(read_c0_count()); #endif - pending = read_c0_cause(); + pending = read_c0_cause() & read_c0_status(); #ifdef CONFIG_SIBYTE_BCM1480_PROF if (pending & CAUSEF_IP7) /* Cpu performance counter interrupt */ diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c index a451b4c7732..f9bd9f07451 100644 --- a/arch/mips/sibyte/sb1250/irq.c +++ b/arch/mips/sibyte/sb1250/irq.c @@ -442,7 +442,7 @@ asmlinkage void plat_irq_dispatch(struct pt_regs *regs) * blasting the high 32 bits. */ - pending = read_c0_cause(); + pending = read_c0_cause() & read_c0_status(); #ifdef CONFIG_SIBYTE_SB1250_PROF if (pending & CAUSEF_IP7) /* Cpu performance counter interrupt */ @@ -476,5 +476,8 @@ asmlinkage void plat_irq_dispatch(struct pt_regs *regs) R_IMR_INTERRUPT_STATUS_BASE))); if (mask) do_IRQ(fls64(mask) - 1, regs); - } + else + spurious_interrupt(regs); + } else + spurious_interrupt(regs); } |