aboutsummaryrefslogtreecommitdiff
path: root/drivers/acpi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/acpi')
-rw-r--r--drivers/acpi/processor_core.c37
-rw-r--r--drivers/acpi/processor_idle.c105
-rw-r--r--drivers/acpi/processor_perflib.c33
3 files changed, 109 insertions, 66 deletions
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index f4778747e88..e421842888b 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -256,6 +256,43 @@ acpi_processor_errata (
/* --------------------------------------------------------------------------
+ Common ACPI processor fucntions
+ -------------------------------------------------------------------------- */
+
+/*
+ * _PDC is required for a BIOS-OS handshake for most of the newer
+ * ACPI processor features.
+ */
+
+int acpi_processor_set_pdc(struct acpi_processor *pr,
+ struct acpi_object_list *pdc_in)
+{
+ acpi_status status = AE_OK;
+ u32 arg0_buf[3];
+ union acpi_object arg0 = {ACPI_TYPE_BUFFER};
+ struct acpi_object_list no_object = {1, &arg0};
+ struct acpi_object_list *pdc;
+
+ ACPI_FUNCTION_TRACE("acpi_processor_set_pdc");
+
+ arg0.buffer.length = 12;
+ arg0.buffer.pointer = (u8 *) arg0_buf;
+ arg0_buf[0] = ACPI_PDC_REVISION_ID;
+ arg0_buf[1] = 0;
+ arg0_buf[2] = 0;
+
+ pdc = (pdc_in) ? pdc_in : &no_object;
+
+ status = acpi_evaluate_object(pr->handle, "_PDC", pdc, NULL);
+
+ if ((ACPI_FAILURE(status)) && (pdc_in))
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Error evaluating _PDC, using legacy perf. control...\n"));
+
+ return_VALUE(status);
+}
+
+
+/* --------------------------------------------------------------------------
FS Interface (/proc)
-------------------------------------------------------------------------- */
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 79d5ca3066c..8f038cd2947 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -6,6 +6,8 @@
* Copyright (C) 2004 Dominik Brodowski <linux@brodo.de>
* Copyright (C) 2004 Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
* - Added processor hotplug support
+ * Copyright (C) 2005 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+ * - Added support for C3 on SMP
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
@@ -142,7 +144,7 @@ acpi_processor_power_activate (
switch (old->type) {
case ACPI_STATE_C3:
/* Disable bus master reload */
- if (new->type != ACPI_STATE_C3)
+ if (new->type != ACPI_STATE_C3 && pr->flags.bm_check)
acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0, ACPI_MTX_DO_NOT_LOCK);
break;
}
@@ -152,7 +154,7 @@ acpi_processor_power_activate (
switch (new->type) {
case ACPI_STATE_C3:
/* Enable bus master reload */
- if (old->type != ACPI_STATE_C3)
+ if (old->type != ACPI_STATE_C3 && pr->flags.bm_check)
acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 1, ACPI_MTX_DO_NOT_LOCK);
break;
}
@@ -163,6 +165,9 @@ acpi_processor_power_activate (
}
+static atomic_t c3_cpu_count;
+
+
static void acpi_processor_idle (void)
{
struct acpi_processor *pr = NULL;
@@ -297,8 +302,22 @@ static void acpi_processor_idle (void)
break;
case ACPI_STATE_C3:
- /* Disable bus master arbitration */
- acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1, ACPI_MTX_DO_NOT_LOCK);
+
+ if (pr->flags.bm_check) {
+ if (atomic_inc_return(&c3_cpu_count) ==
+ num_online_cpus()) {
+ /*
+ * All CPUs are trying to go to C3
+ * Disable bus master arbitration
+ */
+ acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1,
+ ACPI_MTX_DO_NOT_LOCK);
+ }
+ } else {
+ /* SMP with no shared cache... Invalidate cache */
+ ACPI_FLUSH_CPU_CACHE();
+ }
+
/* Get start time (ticks) */
t1 = inl(acpi_fadt.xpm_tmr_blk.address);
/* Invoke C3 */
@@ -307,8 +326,12 @@ static void acpi_processor_idle (void)
t2 = inl(acpi_fadt.xpm_tmr_blk.address);
/* Get end time (ticks) */
t2 = inl(acpi_fadt.xpm_tmr_blk.address);
- /* Enable bus master arbitration */
- acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0, ACPI_MTX_DO_NOT_LOCK);
+ if (pr->flags.bm_check) {
+ /* Enable bus master arbitration */
+ atomic_dec(&c3_cpu_count);
+ acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0, ACPI_MTX_DO_NOT_LOCK);
+ }
+
/* Re-enable interrupts */
local_irq_enable();
/* Compute time (ticks) that we were actually asleep */
@@ -552,9 +575,6 @@ static int acpi_processor_get_power_info_cst (struct acpi_processor *pr)
ACPI_FUNCTION_TRACE("acpi_processor_get_power_info_cst");
- if (errata.smp)
- return_VALUE(-ENODEV);
-
if (nocst)
return_VALUE(-ENODEV);
@@ -687,13 +707,6 @@ static void acpi_processor_power_verify_c2(struct acpi_processor_cx *cx)
return_VOID;
}
- /* We're (currently) only supporting C2 on UP */
- else if (errata.smp) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "C2 not supported in SMP mode\n"));
- return_VOID;
- }
-
/*
* Otherwise we've met all of our C2 requirements.
* Normalize the C2 latency to expidite policy
@@ -709,6 +722,8 @@ static void acpi_processor_power_verify_c3(
struct acpi_processor *pr,
struct acpi_processor_cx *cx)
{
+ static int bm_check_flag;
+
ACPI_FUNCTION_TRACE("acpi_processor_get_power_verify_c3");
if (!cx->address)
@@ -725,20 +740,6 @@ static void acpi_processor_power_verify_c3(
return_VOID;
}
- /* bus mastering control is necessary */
- else if (!pr->flags.bm_control) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "C3 support requires bus mastering control\n"));
- return_VOID;
- }
-
- /* We're (currently) only supporting C2 on UP */
- else if (errata.smp) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "C3 not supported in SMP mode\n"));
- return_VOID;
- }
-
/*
* PIIX4 Erratum #18: We don't support C3 when Type-F (fast)
* DMA transfers are used by any ISA device to avoid livelock.
@@ -752,6 +753,39 @@ static void acpi_processor_power_verify_c3(
return_VOID;
}
+ /* All the logic here assumes flags.bm_check is same across all CPUs */
+ if (!bm_check_flag) {
+ /* Determine whether bm_check is needed based on CPU */
+ acpi_processor_power_init_bm_check(&(pr->flags), pr->id);
+ bm_check_flag = pr->flags.bm_check;
+ } else {
+ pr->flags.bm_check = bm_check_flag;
+ }
+
+ if (pr->flags.bm_check) {
+ printk("Disabling BM access before entering C3\n");
+ /* bus mastering control is necessary */
+ if (!pr->flags.bm_control) {
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "C3 support requires bus mastering control\n"));
+ return_VOID;
+ }
+ } else {
+ printk("Invalidating cache before entering C3\n");
+ /*
+ * WBINVD should be set in fadt, for C3 state to be
+ * supported on when bm_check is not required.
+ */
+ if (acpi_fadt.wb_invd != 1) {
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Cache invalidation should work properly"
+ " for C3 to be enabled on SMP systems\n"));
+ return_VOID;
+ }
+ acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD,
+ 0, ACPI_MTX_DO_NOT_LOCK);
+ }
+
/*
* Otherwise we've met all of our C3 requirements.
* Normalize the C3 latency to expidite policy. Enable
@@ -760,7 +794,6 @@ static void acpi_processor_power_verify_c3(
*/
cx->valid = 1;
cx->latency_ticks = US_TO_PM_TIMER_TICKS(cx->latency);
- pr->flags.bm_check = 1;
return_VOID;
}
@@ -848,7 +881,7 @@ int acpi_processor_cst_has_changed (struct acpi_processor *pr)
if (!pr)
return_VALUE(-EINVAL);
- if (errata.smp || nocst) {
+ if ( nocst) {
return_VALUE(-ENODEV);
}
@@ -948,7 +981,6 @@ static struct file_operations acpi_processor_power_fops = {
.release = single_release,
};
-
int acpi_processor_power_init(struct acpi_processor *pr, struct acpi_device *device)
{
acpi_status status = 0;
@@ -965,7 +997,10 @@ int acpi_processor_power_init(struct acpi_processor *pr, struct acpi_device *dev
first_run++;
}
- if (!errata.smp && (pr->id == 0) && acpi_fadt.cst_cnt && !nocst) {
+ if (!pr)
+ return_VALUE(-EINVAL);
+
+ if (acpi_fadt.cst_cnt && !nocst) {
status = acpi_os_write_port(acpi_fadt.smi_cmd, acpi_fadt.cst_cnt, 8);
if (ACPI_FAILURE(status)) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
@@ -973,6 +1008,8 @@ int acpi_processor_power_init(struct acpi_processor *pr, struct acpi_device *dev
}
}
+ acpi_processor_power_init_pdc(&(pr->power), pr->id);
+ acpi_processor_set_pdc(pr, pr->power.pdc);
acpi_processor_get_power_info(pr);
/*
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index a9a1a8fe319..1f0d6256302 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -165,37 +165,6 @@ void acpi_processor_ppc_exit(void) {
acpi_processor_ppc_status &= ~PPC_REGISTERED;
}
-/*
- * when registering a cpufreq driver with this ACPI processor driver, the
- * _PCT and _PSS structures are read out and written into struct
- * acpi_processor_performance.
- */
-static int acpi_processor_set_pdc (struct acpi_processor *pr)
-{
- acpi_status status = AE_OK;
- u32 arg0_buf[3];
- union acpi_object arg0 = {ACPI_TYPE_BUFFER};
- struct acpi_object_list no_object = {1, &arg0};
- struct acpi_object_list *pdc;
-
- ACPI_FUNCTION_TRACE("acpi_processor_set_pdc");
-
- arg0.buffer.length = 12;
- arg0.buffer.pointer = (u8 *) arg0_buf;
- arg0_buf[0] = ACPI_PDC_REVISION_ID;
- arg0_buf[1] = 0;
- arg0_buf[2] = 0;
-
- pdc = (pr->performance->pdc) ? pr->performance->pdc : &no_object;
-
- status = acpi_evaluate_object(pr->handle, "_PDC", pdc, NULL);
-
- if ((ACPI_FAILURE(status)) && (pr->performance->pdc))
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Error evaluating _PDC, using legacy perf. control...\n"));
-
- return_VALUE(status);
-}
-
static int
acpi_processor_get_performance_control (
@@ -357,7 +326,7 @@ acpi_processor_get_performance_info (
if (!pr || !pr->performance || !pr->handle)
return_VALUE(-EINVAL);
- acpi_processor_set_pdc(pr);
+ acpi_processor_set_pdc(pr, pr->performance->pdc);
status = acpi_get_handle(pr->handle, "_PCT", &handle);
if (ACPI_FAILURE(status)) {