1 files changed, 9 insertions, 16 deletions

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 3ce43920e45..57a43649a46 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1082,12 +1082,6 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc)
 	if (((cdb[4] >> 4) & 0xf) != 0)
 		goto invalid_fld;       /* power conditions not supported */
 
-	if (qc->dev->horkage & ATA_HORKAGE_SKIP_PM) {
-		/* the device lacks PM support, finish without doing anything */
-		scmd->result = SAM_STAT_GOOD;
-		return 1;
-	}
-
 	if (cdb[4] & 0x1) {
 		tf->nsect = 1;	/* 1 sector, lba=0 */
 
@@ -1643,6 +1637,7 @@ defer:
 
 /**
  *	ata_scsi_rbuf_get - Map response buffer.
+ *	@cmd: SCSI command containing buffer to be mapped.
  *	@flags: unsigned long variable to store irq enable status
  *	@copy_in: copy in from user buffer
  *
@@ -1960,7 +1955,7 @@ static unsigned int ata_msense_ctl_mode(u8 *buf)
 
 /**
  *	ata_msense_rw_recovery - Simulate MODE SENSE r/w error recovery page
- *	@bufp: output buffer
+ *	@buf: output buffer
  *
  *	Generate a generic MODE SENSE r/w error recovery page.
  *
@@ -2348,8 +2343,8 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
 {
 	struct scsi_cmnd *scmd = qc->scsicmd;
 	struct ata_device *dev = qc->dev;
-	int using_pio = (dev->flags & ATA_DFLAG_PIO);
 	int nodata = (scmd->sc_data_direction == DMA_NONE);
+	int using_pio = !nodata && (dev->flags & ATA_DFLAG_PIO);
 	unsigned int nbytes;
 
 	memset(qc->cdb, 0, dev->cdb_len);
@@ -2367,7 +2362,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
 	ata_qc_set_pc_nbytes(qc);
 
 	/* check whether ATAPI DMA is safe */
-	if (!using_pio && ata_check_atapi_dma(qc))
+	if (!nodata && !using_pio && atapi_check_dma(qc))
 		using_pio = 1;
 
 	/* Some controller variants snoop this value for Packet
@@ -2407,13 +2402,11 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
 	qc->tf.lbam = (nbytes & 0xFF);
 	qc->tf.lbah = (nbytes >> 8);
 
-	if (using_pio || nodata) {
-		/* no data, or PIO data xfer */
-		if (nodata)
-			qc->tf.protocol = ATAPI_PROT_NODATA;
-		else
-			qc->tf.protocol = ATAPI_PROT_PIO;
-	} else {
+	if (nodata)
+		qc->tf.protocol = ATAPI_PROT_NODATA;
+	else if (using_pio)
+		qc->tf.protocol = ATAPI_PROT_PIO;
+	else {
 		/* DMA data xfer */
 		qc->tf.protocol = ATAPI_PROT_DMA;
 		qc->tf.feature |= ATAPI_PKT_DMA;