diff options
Diffstat (limited to 'drivers/ata/pata_hpt37x.c')
| -rw-r--r-- | drivers/ata/pata_hpt37x.c | 37 |
1 files changed, 16 insertions, 21 deletions
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 5a0a410654e..6446735a46e 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -26,7 +26,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_hpt37x" -#define DRV_VERSION "0.6.5" +#define DRV_VERSION "0.6.6" struct hpt_clock { u8 xfer_speed; @@ -931,15 +931,6 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) .udma_mask = 0x7f, .port_ops = &hpt372_port_ops }; - /* HPT371, 372 and friends - UDMA100 at 50MHz clock */ - static const struct ata_port_info info_hpt372_50 = { - .sht = &hpt37x_sht, - .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = 0x3f, - .port_ops = &hpt372_port_ops - }; /* HPT374 - UDMA133 */ static const struct ata_port_info info_hpt374 = { .sht = &hpt37x_sht, @@ -961,7 +952,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) u8 mcr1; u32 freq; int prefer_dpll = 1; - + unsigned long iobase = pci_resource_start(dev, 4); const struct hpt_chip *chip_table; @@ -1055,7 +1046,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) */ pci_write_config_byte(dev, 0x5b, 0x23); - + /* * HighPoint does this for HPT372A. * NOTE: This register is only writeable via I/O space. @@ -1088,7 +1079,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) * Turn the frequency check into a band and then find a timing * table to match it. */ - + clock_slot = hpt37x_clock_slot(freq, chip_table->base); if (chip_table->clocks[clock_slot] == NULL || prefer_dpll) { /* @@ -1098,17 +1089,21 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) * use a 50MHz DPLL by choice */ unsigned int f_low, f_high; - int adjust; - - clock_slot = 2; + int dpll, adjust; + + /* Compute DPLL */ + dpll = 2; if (port->udma_mask & 0xE0) - clock_slot = 3; - - f_low = (MHz[clock_slot] * chip_table->base) / 192; + dpll = 3; + + f_low = (MHz[clock_slot] * 48) / MHz[dpll]; f_high = f_low + 2; + if (clock_slot > 1) + f_high += 2; /* Select the DPLL clock. */ pci_write_config_byte(dev, 0x5b, 0x21); + pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low); for(adjust = 0; adjust < 8; adjust++) { if (hpt37x_calibrate_dpll(dev)) @@ -1124,12 +1119,12 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) printk(KERN_WARNING "hpt37x: DPLL did not stabilize.\n"); return -ENODEV; } - if (clock_slot == 3) + if (dpll == 3) private_data = (void *)hpt37x_timings_66; else private_data = (void *)hpt37x_timings_50; - printk(KERN_INFO "hpt37x: Bus clock %dMHz, using DPLL.\n", MHz[clock_slot]); + printk(KERN_INFO "hpt37x: Bus clock %dMHz, using DPLL.\n", MHz[dpll]); } else { private_data = (void *)chip_table->clocks[clock_slot]; /* |