diff options
Diffstat (limited to 'drivers/ata/sata_mv.c')
| -rw-r--r-- | drivers/ata/sata_mv.c | 56 |
1 files changed, 26 insertions, 30 deletions
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 86918634a4c..f2d8a020ea5 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -33,10 +33,6 @@ * * --> ATAPI support (Marvell claims the 60xx/70xx chips can do it). * - * --> Investigate problems with PCI Message Signalled Interrupts (MSI). - * - * --> Cache frequently-accessed registers in mv_port_priv to reduce overhead. - * * --> Develop a low-power-consumption strategy, and implement it. * * --> [Experiment, low priority] Investigate interrupt coalescing. @@ -72,7 +68,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_mv" -#define DRV_VERSION "1.24" +#define DRV_VERSION "1.25" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -351,8 +347,6 @@ enum { EDMA_HALTCOND_OFS = 0x60, /* GenIIe halt conditions */ - GEN_II_NCQ_MAX_SECTORS = 256, /* max sects/io on Gen2 w/NCQ */ - /* Host private flags (hp_flags) */ MV_HP_FLAG_MSI = (1 << 0), MV_HP_ERRATA_50XXB0 = (1 << 1), @@ -883,19 +877,15 @@ static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio, struct mv_host_priv *hpriv = ap->host->private_data; int hardport = mv_hardport_from_port(ap->port_no); void __iomem *hc_mmio = mv_hc_base_from_port( - mv_host_base(ap->host), hardport); - u32 hc_irq_cause, ipending; + mv_host_base(ap->host), ap->port_no); + u32 hc_irq_cause; /* clear EDMA event indicators, if any */ writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); - /* clear EDMA interrupt indicator, if any */ - hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS); - ipending = (DEV_IRQ | DMA_IRQ) << hardport; - if (hc_irq_cause & ipending) { - writelfl(hc_irq_cause & ~ipending, - hc_mmio + HC_IRQ_CAUSE_OFS); - } + /* clear pending irq events */ + hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport); + writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); mv_edma_cfg(ap, want_ncq); @@ -1099,20 +1089,12 @@ static void mv6_dev_config(struct ata_device *adev) * * Gen-II does not support NCQ over a port multiplier * (no FIS-based switching). - * - * We don't have hob_nsect when doing NCQ commands on Gen-II. - * See mv_qc_prep() for more info. */ if (adev->flags & ATA_DFLAG_NCQ) { if (sata_pmp_attached(adev->link->ap)) { adev->flags &= ~ATA_DFLAG_NCQ; ata_dev_printk(adev, KERN_INFO, "NCQ disabled for command-based switching\n"); - } else if (adev->max_sectors > GEN_II_NCQ_MAX_SECTORS) { - adev->max_sectors = GEN_II_NCQ_MAX_SECTORS; - ata_dev_printk(adev, KERN_INFO, - "max_sectors limited to %u for NCQ\n", - adev->max_sectors); } } } @@ -1450,7 +1432,8 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) * only 11 bytes...so we must pick and choose required * registers based on the command. So, we drop feature and * hob_feature for [RW] DMA commands, but they are needed for - * NCQ. NCQ will drop hob_nsect. + * NCQ. NCQ will drop hob_nsect, which is not needed there + * (nsect is used only for the tag; feat/hob_feat hold true nsect). */ switch (tf->command) { case ATA_CMD_READ: @@ -2214,9 +2197,15 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance) struct ata_host *host = dev_instance; struct mv_host_priv *hpriv = host->private_data; unsigned int handled = 0; + int using_msi = hpriv->hp_flags & MV_HP_FLAG_MSI; u32 main_irq_cause, pending_irqs; spin_lock(&host->lock); + + /* for MSI: block new interrupts while in here */ + if (using_msi) + writel(0, hpriv->main_irq_mask_addr); + main_irq_cause = readl(hpriv->main_irq_cause_addr); pending_irqs = main_irq_cause & hpriv->main_irq_mask; /* @@ -2230,6 +2219,11 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance) handled = mv_host_intr(host, pending_irqs); } spin_unlock(&host->lock); + + /* for MSI: unmask; interrupt cause bits will retrigger now */ + if (using_msi) + writel(hpriv->main_irq_mask, hpriv->main_irq_mask_addr); + return IRQ_RETVAL(handled); } @@ -2821,8 +2815,7 @@ static void mv_eh_thaw(struct ata_port *ap) writel(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); /* clear pending irq events */ - hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS); - hc_irq_cause &= ~((DEV_IRQ | DMA_IRQ) << hardport); + hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport); writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); mv_enable_port_irqs(ap, ERR_IRQ); @@ -3075,6 +3068,9 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK_OFS; } + /* initialize shadow irq mask with register's value */ + hpriv->main_irq_mask = readl(hpriv->main_irq_mask_addr); + /* global interrupt mask: 0 == mask everything */ mv_set_main_irq_mask(host, ~0, 0); @@ -3430,9 +3426,9 @@ static int mv_pci_init_one(struct pci_dev *pdev, if (rc) return rc; - /* Enable interrupts */ - if (msi && pci_enable_msi(pdev)) - pci_intx(pdev, 1); + /* Enable message-switched interrupts, if requested */ + if (msi && pci_enable_msi(pdev) == 0) + hpriv->hp_flags |= MV_HP_FLAG_MSI; mv_dump_pci_cfg(pdev, 0x68); mv_print_info(host); |