diff options
Diffstat (limited to 'drivers/ata')
-rw-r--r-- | drivers/ata/Kconfig | 14 | ||||
-rw-r--r-- | drivers/ata/Makefile | 1 | ||||
-rw-r--r-- | drivers/ata/pata_mpc52xx.c | 6 | ||||
-rw-r--r-- | drivers/ata/pata_of_platform.c | 114 | ||||
-rw-r--r-- | drivers/ata/pata_platform.c | 144 |
5 files changed, 215 insertions, 64 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 2478cca653d..ae19c9b30d1 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -184,7 +184,7 @@ config PATA_ACPI config SATA_FSL tristate "Freescale 3.0Gbps SATA support" - depends on PPC_MPC837x + depends on FSL_SOC help This option enables support for Freescale 3.0Gbps SATA controller. It can be found on MPC837x and MPC8315. @@ -616,13 +616,23 @@ config PATA_WINBOND_VLB config PATA_PLATFORM tristate "Generic platform device PATA support" - depends on EMBEDDED || ARCH_RPC + depends on EMBEDDED || ARCH_RPC || PPC help This option enables support for generic directly connected ATA devices commonly found on embedded systems. If unsure, say N. +config PATA_OF_PLATFORM + tristate "OpenFirmware platform device PATA support" + depends on PATA_PLATFORM && PPC_OF + help + This option enables support for generic directly connected ATA + devices commonly found on embedded systems with OpenFirmware + bindings. + + If unsure, say N. + config PATA_ICSIDE tristate "Acorn ICS PATA support" depends on ARM && ARCH_ACORN diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 82550c16818..701651e37c8 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -68,6 +68,7 @@ obj-$(CONFIG_PATA_IXP4XX_CF) += pata_ixp4xx_cf.o obj-$(CONFIG_PATA_SCC) += pata_scc.o obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o +obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o # Should be last but two libata driver obj-$(CONFIG_PATA_ACPI) += pata_acpi.o diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c index dc401626cdb..5413ebfa72e 100644 --- a/drivers/ata/pata_mpc52xx.c +++ b/drivers/ata/pata_mpc52xx.c @@ -494,10 +494,8 @@ mpc52xx_ata_resume(struct of_device *op) static struct of_device_id mpc52xx_ata_of_match[] = { - { - .type = "ata", - .compatible = "mpc5200-ata", - }, + { .compatible = "fsl,mpc5200-ata", }, + { .compatible = "mpc5200-ata", }, {}, }; diff --git a/drivers/ata/pata_of_platform.c b/drivers/ata/pata_of_platform.c new file mode 100644 index 00000000000..938f48a807e --- /dev/null +++ b/drivers/ata/pata_of_platform.c @@ -0,0 +1,114 @@ +/* + * OF-platform PATA driver + * + * Copyright (c) 2007 MontaVista Software, Inc. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/pata_platform.h> + +static int __devinit pata_of_platform_probe(struct of_device *ofdev, + const struct of_device_id *match) +{ + int ret; + struct device_node *dn = ofdev->node; + struct resource io_res; + struct resource ctl_res; + struct resource irq_res; + unsigned int reg_shift = 0; + int pio_mode = 0; + int pio_mask; + const u32 *prop; + + ret = of_address_to_resource(dn, 0, &io_res); + if (ret) { + dev_err(&ofdev->dev, "can't get IO address from " + "device tree\n"); + return -EINVAL; + } + + if (of_device_is_compatible(dn, "electra-ide")) { + /* Altstatus is really at offset 0x3f6 from the primary window + * on electra-ide. Adjust ctl_res and io_res accordingly. + */ + ctl_res = io_res; + ctl_res.start = ctl_res.start+0x3f6; + io_res.end = ctl_res.start-1; + } else { + ret = of_address_to_resource(dn, 1, &ctl_res); + if (ret) { + dev_err(&ofdev->dev, "can't get CTL address from " + "device tree\n"); + return -EINVAL; + } + } + + ret = of_irq_to_resource(dn, 0, &irq_res); + if (ret == NO_IRQ) + irq_res.start = irq_res.end = -1; + else + irq_res.flags = 0; + + prop = of_get_property(dn, "reg-shift", NULL); + if (prop) + reg_shift = *prop; + + prop = of_get_property(dn, "pio-mode", NULL); + if (prop) { + pio_mode = *prop; + if (pio_mode > 6) { + dev_err(&ofdev->dev, "invalid pio-mode\n"); + return -EINVAL; + } + } else { + dev_info(&ofdev->dev, "pio-mode unspecified, assuming PIO0\n"); + } + + pio_mask = 1 << pio_mode; + pio_mask |= (1 << pio_mode) - 1; + + return __pata_platform_probe(&ofdev->dev, &io_res, &ctl_res, &irq_res, + reg_shift, pio_mask); +} + +static int __devexit pata_of_platform_remove(struct of_device *ofdev) +{ + return __pata_platform_remove(&ofdev->dev); +} + +static struct of_device_id pata_of_platform_match[] = { + { .compatible = "ata-generic", }, + { .compatible = "electra-ide", }, + {}, +}; +MODULE_DEVICE_TABLE(of, pata_of_platform_match); + +static struct of_platform_driver pata_of_platform_driver = { + .name = "pata_of_platform", + .match_table = pata_of_platform_match, + .probe = pata_of_platform_probe, + .remove = __devexit_p(pata_of_platform_remove), +}; + +static int __init pata_of_platform_init(void) +{ + return of_register_platform_driver(&pata_of_platform_driver); +} +module_init(pata_of_platform_init); + +static void __exit pata_of_platform_exit(void) +{ + of_unregister_platform_driver(&pata_of_platform_driver); +} +module_exit(pata_of_platform_exit); + +MODULE_DESCRIPTION("OF-platform PATA driver"); +MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c index ac03a90a616..224bb6c2030 100644 --- a/drivers/ata/pata_platform.c +++ b/drivers/ata/pata_platform.c @@ -93,14 +93,9 @@ static struct ata_port_operations pata_platform_port_ops = { }; static void pata_platform_setup_port(struct ata_ioports *ioaddr, - struct pata_platform_info *info) + unsigned int shift) { - unsigned int shift = 0; - /* Fixup the port shift for platforms that need it */ - if (info && info->ioport_shift) - shift = info->ioport_shift; - ioaddr->data_addr = ioaddr->cmd_addr + (ATA_REG_DATA << shift); ioaddr->error_addr = ioaddr->cmd_addr + (ATA_REG_ERR << shift); ioaddr->feature_addr = ioaddr->cmd_addr + (ATA_REG_FEATURE << shift); @@ -114,8 +109,13 @@ static void pata_platform_setup_port(struct ata_ioports *ioaddr, } /** - * pata_platform_probe - attach a platform interface - * @pdev: platform device + * __pata_platform_probe - attach a platform interface + * @dev: device + * @io_res: Resource representing I/O base + * @ctl_res: Resource representing CTL base + * @irq_res: Resource representing IRQ and its flags + * @ioport_shift: I/O port shift + * @__pio_mask: PIO mask * * Register a platform bus IDE interface. Such interfaces are PIO and we * assume do not support IRQ sharing. @@ -135,42 +135,18 @@ static void pata_platform_setup_port(struct ata_ioports *ioaddr, * * If no IRQ resource is present, PIO polling mode is used instead. */ -static int __devinit pata_platform_probe(struct platform_device *pdev) +int __devinit __pata_platform_probe(struct device *dev, + struct resource *io_res, + struct resource *ctl_res, + struct resource *irq_res, + unsigned int ioport_shift, + int __pio_mask) { - struct resource *io_res, *ctl_res; struct ata_host *host; struct ata_port *ap; - struct pata_platform_info *pp_info; unsigned int mmio; - int irq; - - /* - * Simple resource validation .. - */ - if ((pdev->num_resources != 3) && (pdev->num_resources != 2)) { - dev_err(&pdev->dev, "invalid number of resources\n"); - return -EINVAL; - } - - /* - * Get the I/O base first - */ - io_res = platform_get_resource(pdev, IORESOURCE_IO, 0); - if (io_res == NULL) { - io_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (unlikely(io_res == NULL)) - return -EINVAL; - } - - /* - * Then the CTL base - */ - ctl_res = platform_get_resource(pdev, IORESOURCE_IO, 1); - if (ctl_res == NULL) { - ctl_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (unlikely(ctl_res == NULL)) - return -EINVAL; - } + int irq = 0; + int irq_flags = 0; /* * Check for MMIO @@ -181,20 +157,21 @@ static int __devinit pata_platform_probe(struct platform_device *pdev) /* * And the IRQ */ - irq = platform_get_irq(pdev, 0); - if (irq < 0) - irq = 0; /* no irq */ + if (irq_res && irq_res->start > 0) { + irq = irq_res->start; + irq_flags = irq_res->flags; + } /* * Now that that's out of the way, wire up the port.. */ - host = ata_host_alloc(&pdev->dev, 1); + host = ata_host_alloc(dev, 1); if (!host) return -ENOMEM; ap = host->ports[0]; ap->ops = &pata_platform_port_ops; - ap->pio_mask = pio_mask; + ap->pio_mask = __pio_mask; ap->flags |= ATA_FLAG_SLAVE_POSS; /* @@ -209,25 +186,24 @@ static int __devinit pata_platform_probe(struct platform_device *pdev) * Handle the MMIO case */ if (mmio) { - ap->ioaddr.cmd_addr = devm_ioremap(&pdev->dev, io_res->start, + ap->ioaddr.cmd_addr = devm_ioremap(dev, io_res->start, io_res->end - io_res->start + 1); - ap->ioaddr.ctl_addr = devm_ioremap(&pdev->dev, ctl_res->start, + ap->ioaddr.ctl_addr = devm_ioremap(dev, ctl_res->start, ctl_res->end - ctl_res->start + 1); } else { - ap->ioaddr.cmd_addr = devm_ioport_map(&pdev->dev, io_res->start, + ap->ioaddr.cmd_addr = devm_ioport_map(dev, io_res->start, io_res->end - io_res->start + 1); - ap->ioaddr.ctl_addr = devm_ioport_map(&pdev->dev, ctl_res->start, + ap->ioaddr.ctl_addr = devm_ioport_map(dev, ctl_res->start, ctl_res->end - ctl_res->start + 1); } if (!ap->ioaddr.cmd_addr || !ap->ioaddr.ctl_addr) { - dev_err(&pdev->dev, "failed to map IO/CTL base\n"); + dev_err(dev, "failed to map IO/CTL base\n"); return -ENOMEM; } ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr; - pp_info = pdev->dev.platform_data; - pata_platform_setup_port(&ap->ioaddr, pp_info); + pata_platform_setup_port(&ap->ioaddr, ioport_shift); ata_port_desc(ap, "%s cmd 0x%llx ctl 0x%llx", mmio ? "mmio" : "ioport", (unsigned long long)io_res->start, @@ -235,26 +211,78 @@ static int __devinit pata_platform_probe(struct platform_device *pdev) /* activate */ return ata_host_activate(host, irq, irq ? ata_interrupt : NULL, - pp_info ? pp_info->irq_flags : 0, - &pata_platform_sht); + irq_flags, &pata_platform_sht); } +EXPORT_SYMBOL_GPL(__pata_platform_probe); /** - * pata_platform_remove - unplug a platform interface - * @pdev: platform device + * __pata_platform_remove - unplug a platform interface + * @dev: device * * A platform bus ATA device has been unplugged. Perform the needed * cleanup. Also called on module unload for any active devices. */ -static int __devexit pata_platform_remove(struct platform_device *pdev) +int __devexit __pata_platform_remove(struct device *dev) { - struct device *dev = &pdev->dev; struct ata_host *host = dev_get_drvdata(dev); ata_host_detach(host); return 0; } +EXPORT_SYMBOL_GPL(__pata_platform_remove); + +static int __devinit pata_platform_probe(struct platform_device *pdev) +{ + struct resource *io_res; + struct resource *ctl_res; + struct resource *irq_res; + struct pata_platform_info *pp_info = pdev->dev.platform_data; + + /* + * Simple resource validation .. + */ + if ((pdev->num_resources != 3) && (pdev->num_resources != 2)) { + dev_err(&pdev->dev, "invalid number of resources\n"); + return -EINVAL; + } + + /* + * Get the I/O base first + */ + io_res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (io_res == NULL) { + io_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(io_res == NULL)) + return -EINVAL; + } + + /* + * Then the CTL base + */ + ctl_res = platform_get_resource(pdev, IORESOURCE_IO, 1); + if (ctl_res == NULL) { + ctl_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (unlikely(ctl_res == NULL)) + return -EINVAL; + } + + /* + * And the IRQ + */ + irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (irq_res) + irq_res->flags = pp_info ? pp_info->irq_flags : 0; + + return __pata_platform_probe(&pdev->dev, io_res, ctl_res, irq_res, + pp_info ? pp_info->ioport_shift : 0, + pio_mask); +} + +static int __devexit pata_platform_remove(struct platform_device *pdev) +{ + return __pata_platform_remove(&pdev->dev); +} static struct platform_driver pata_platform_driver = { .probe = pata_platform_probe, |