aboutsummaryrefslogtreecommitdiff
path: root/drivers/ata
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata')
-rw-r--r--drivers/ata/ata_piix.c6
-rw-r--r--drivers/ata/pata_ali.c34
-rw-r--r--drivers/ata/pata_amd.c4
-rw-r--r--drivers/ata/pata_cs5530.c2
-rw-r--r--drivers/ata/pata_it821x.c3
-rw-r--r--drivers/ata/pata_serverworks.c5
-rw-r--r--drivers/ata/pata_sis.c8
-rw-r--r--drivers/ata/pata_sl82c105.c5
-rw-r--r--drivers/ata/pata_via.c6
-rw-r--r--drivers/ata/sata_mv.c20
10 files changed, 32 insertions, 61 deletions
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 21a7ca4936b..d9fa329fd15 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -928,20 +928,18 @@ static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev)
{
struct pci_dev *pdev = NULL;
u16 cfg;
- u8 rev;
int no_piix_dma = 0;
while((pdev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev)) != NULL)
{
/* Look for 450NX PXB. Check for problem configurations
A PCI quirk checks bit 6 already */
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
pci_read_config_word(pdev, 0x41, &cfg);
/* Only on the original revision: IDE DMA can hang */
- if (rev == 0x00)
+ if (pdev->revision == 0x00)
no_piix_dma = 1;
/* On all revisions below 5 PXB bus lock must be disabled for IDE */
- else if (cfg & (1<<14) && rev < 5)
+ else if (cfg & (1<<14) && pdev->revision < 5)
no_piix_dma = 2;
}
if (no_piix_dma)
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 30c4276ec88..010436795d2 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -455,23 +455,21 @@ static struct ata_port_operations ali_c5_port_ops = {
static void ali_init_chipset(struct pci_dev *pdev)
{
- u8 rev, tmp;
+ u8 tmp;
struct pci_dev *north, *isa_bridge;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
-
/*
* The chipset revision selects the driver operations and
* mode data.
*/
- if (rev >= 0x20 && rev < 0xC2) {
+ if (pdev->revision >= 0x20 && pdev->revision < 0xC2) {
/* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */
pci_read_config_byte(pdev, 0x4B, &tmp);
/* Clear CD-ROM DMA write bit */
tmp &= 0x7F;
pci_write_config_byte(pdev, 0x4B, tmp);
- } else if (rev >= 0xC2) {
+ } else if (pdev->revision >= 0xC2) {
/* Enable cable detection logic */
pci_read_config_byte(pdev, 0x4B, &tmp);
pci_write_config_byte(pdev, 0x4B, tmp | 0x08);
@@ -483,21 +481,21 @@ static void ali_init_chipset(struct pci_dev *pdev)
/* Configure the ALi bridge logic. For non ALi rely on BIOS.
Set the south bridge enable bit */
pci_read_config_byte(isa_bridge, 0x79, &tmp);
- if (rev == 0xC2)
+ if (pdev->revision == 0xC2)
pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04);
- else if (rev > 0xC2 && rev < 0xC5)
+ else if (pdev->revision > 0xC2 && pdev->revision < 0xC5)
pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02);
}
- if (rev >= 0x20) {
+ if (pdev->revision >= 0x20) {
/*
* CD_ROM DMA on (0x53 bit 0). Enable this even if we want
* to use PIO. 0x53 bit 1 (rev 20 only) - enable FIFO control
* via 0x54/55.
*/
pci_read_config_byte(pdev, 0x53, &tmp);
- if (rev <= 0x20)
+ if (pdev->revision <= 0x20)
tmp &= ~0x02;
- if (rev >= 0xc7)
+ if (pdev->revision >= 0xc7)
tmp |= 0x03;
else
tmp |= 0x01; /* CD_ROM enable for DMA */
@@ -579,25 +577,23 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
};
const struct ata_port_info *ppi[] = { NULL, NULL };
- u8 rev, tmp;
+ u8 tmp;
struct pci_dev *isa_bridge;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
-
/*
* The chipset revision selects the driver operations and
* mode data.
*/
- if (rev < 0x20) {
+ if (pdev->revision < 0x20) {
ppi[0] = &info_early;
- } else if (rev < 0xC2) {
+ } else if (pdev->revision < 0xC2) {
ppi[0] = &info_20;
- } else if (rev == 0xC2) {
+ } else if (pdev->revision == 0xC2) {
ppi[0] = &info_c2;
- } else if (rev == 0xC3) {
+ } else if (pdev->revision == 0xC3) {
ppi[0] = &info_c3;
- } else if (rev == 0xC4) {
+ } else if (pdev->revision == 0xC4) {
ppi[0] = &info_c4;
} else
ppi[0] = &info_c5;
@@ -605,7 +601,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
ali_init_chipset(pdev);
isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
- if (isa_bridge && rev >= 0x20 && rev < 0xC2) {
+ if (isa_bridge && pdev->revision >= 0x20 && pdev->revision < 0xC2) {
/* Are we paired with a UDMA capable chip */
pci_read_config_byte(isa_bridge, 0x5E, &tmp);
if ((tmp & 0x1E) == 0x12)
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index b9c44c575ce..b09facad63e 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -623,17 +623,15 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
const struct ata_port_info *ppi[] = { NULL, NULL };
static int printed_version;
int type = id->driver_data;
- u8 rev;
u8 fifo;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
pci_read_config_byte(pdev, 0x41, &fifo);
/* Check for AMD7409 without swdma errata and if found adjust type */
- if (type == 1 && rev > 0x7)
+ if (type == 1 && pdev->revision > 0x7)
type = 2;
/* Check for AMD7411 */
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index 3fca5898642..68f150a1e2f 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -266,7 +266,7 @@ static int cs5530_init_chip(void)
}
pci_set_master(cs5530_0);
- pci_set_mwi(cs5530_0);
+ pci_try_set_mwi(cs5530_0);
/*
* Set PCI CacheLineSize to 16-bytes:
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index b67bbf6516b..430673be1df 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -587,8 +587,7 @@ static int it821x_port_start(struct ata_port *ap)
itdev->want[1][1] = ATA_ANY;
itdev->last_device = -1;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &conf);
- if (conf == 0x10) {
+ if (pdev->revision == 0x11) {
itdev->timing10 = 1;
/* Need to disable ATAPI DMA for this case */
if (!itdev->smart)
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index 0231aba51ca..89691541fe5 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -410,11 +410,8 @@ static int serverworks_fixup_osb4(struct pci_dev *pdev)
static int serverworks_fixup_csb(struct pci_dev *pdev)
{
- u8 rev;
u8 btr;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
-
/* Third Channel Test */
if (!(PCI_FUNC(pdev->devfn) & 1)) {
struct pci_dev * findev = NULL;
@@ -456,7 +453,7 @@ static int serverworks_fixup_csb(struct pci_dev *pdev)
if (!(PCI_FUNC(pdev->devfn) & 1))
btr |= 0x2;
else
- btr |= (rev >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
+ btr |= (pdev->revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
pci_write_config_byte(pdev, 0x5A, btr);
return btr;
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 657b1ee2f5c..9a829a7cbc6 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -931,9 +931,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
if (host != NULL) {
chipset = sets; /* Match found */
if (sets->device == 0x630) { /* SIS630 */
- u8 host_rev;
- pci_read_config_byte(host, PCI_REVISION_ID, &host_rev);
- if (host_rev >= 0x30) /* 630 ET */
+ if (host->revision >= 0x30) /* 630 ET */
chipset = &sis100_early;
}
break;
@@ -977,7 +975,6 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
u16 trueid;
u8 prefctl;
u8 idecfg;
- u8 sbrev;
/* Try the second unmasking technique */
pci_read_config_byte(pdev, 0x4a, &idecfg);
@@ -990,11 +987,10 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
lpc_bridge = pci_get_slot(pdev->bus, 0x10); /* Bus 0 Dev 2 Fn 0 */
if (lpc_bridge == NULL)
break;
- pci_read_config_byte(lpc_bridge, PCI_REVISION_ID, &sbrev);
pci_read_config_byte(pdev, 0x49, &prefctl);
pci_dev_put(lpc_bridge);
- if (sbrev == 0x10 && (prefctl & 0x80)) {
+ if (lpc_bridge->revision == 0x10 && (prefctl & 0x80)) {
chipset = &sis133_early;
break;
}
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index bde73418962..8c2813aa6cd 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -270,7 +270,6 @@ static struct ata_port_operations sl82c105_port_ops = {
static int sl82c105_bridge_revision(struct pci_dev *pdev)
{
struct pci_dev *bridge;
- u8 rev;
/*
* The bridge should be part of the same device, but function 0.
@@ -292,10 +291,8 @@ static int sl82c105_bridge_revision(struct pci_dev *pdev)
/*
* We need to find function 0's revision, not function 1
*/
- pci_read_config_byte(bridge, PCI_REVISION_ID, &rev);
-
pci_dev_put(bridge);
- return rev;
+ return bridge->revision;
}
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index f0cadbe6aa1..f645fe22cd1 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -506,7 +506,6 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
struct pci_dev *isa = NULL;
const struct via_isa_bridge *config;
static int printed_version;
- u8 t;
u8 enable;
u32 timing;
@@ -520,9 +519,8 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
!!(config->flags & VIA_BAD_ID),
config->id, NULL))) {
- pci_read_config_byte(isa, PCI_REVISION_ID, &t);
- if (t >= config->rev_min &&
- t <= config->rev_max)
+ if (isa->revision >= config->rev_min &&
+ isa->revision <= config->rev_max)
break;
pci_dev_put(isa);
}
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 8a77a0ae83a..5d576435fcc 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1765,12 +1765,9 @@ static void mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val)
static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio)
{
- u8 rev_id;
int early_5080;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
-
- early_5080 = (pdev->device == 0x5080) && (rev_id == 0);
+ early_5080 = (pdev->device == 0x5080) && (pdev->revision == 0);
if (!early_5080) {
u32 tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL);
@@ -2387,17 +2384,14 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
{
struct pci_dev *pdev = to_pci_dev(host->dev);
struct mv_host_priv *hpriv = host->private_data;
- u8 rev_id;
u32 hp_flags = hpriv->hp_flags;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
-
switch(board_idx) {
case chip_5080:
hpriv->ops = &mv5xxx_ops;
hp_flags |= MV_HP_GEN_I;
- switch (rev_id) {
+ switch (pdev->revision) {
case 0x1:
hp_flags |= MV_HP_ERRATA_50XXB0;
break;
@@ -2417,7 +2411,7 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
hpriv->ops = &mv5xxx_ops;
hp_flags |= MV_HP_GEN_I;
- switch (rev_id) {
+ switch (pdev->revision) {
case 0x0:
hp_flags |= MV_HP_ERRATA_50XXB0;
break;
@@ -2437,7 +2431,7 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
hpriv->ops = &mv6xxx_ops;
hp_flags |= MV_HP_GEN_II;
- switch (rev_id) {
+ switch (pdev->revision) {
case 0x7:
hp_flags |= MV_HP_ERRATA_60X1B2;
break;
@@ -2457,7 +2451,7 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
hpriv->ops = &mv6xxx_ops;
hp_flags |= MV_HP_GEN_IIE;
- switch (rev_id) {
+ switch (pdev->revision) {
case 0x0:
hp_flags |= MV_HP_ERRATA_XX42A0;
break;
@@ -2585,14 +2579,12 @@ static void mv_print_info(struct ata_host *host)
{
struct pci_dev *pdev = to_pci_dev(host->dev);
struct mv_host_priv *hpriv = host->private_data;
- u8 rev_id, scc;
+ u8 scc;
const char *scc_s, *gen;
/* Use this to determine the HW stepping of the chip so we know
* what errata to workaround
*/
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
-
pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &scc);
if (scc == 0)
scc_s = "SCSI";
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 09:37:32 +0000