diff options
Diffstat (limited to 'drivers/base')
| -rw-r--r-- | drivers/base/power/Makefile | 2 | ||||
| -rw-r--r-- | drivers/base/power/main.c | 344 | ||||
| -rw-r--r-- | drivers/base/power/power.h | 32 | ||||
| -rw-r--r-- | drivers/base/power/resume.c | 149 | ||||
| -rw-r--r-- | drivers/base/power/suspend.c | 210 |
5 files changed, 343 insertions, 394 deletions
diff --git a/drivers/base/power/Makefile b/drivers/base/power/Makefile index 9caeaea753a..a803733c839 100644 --- a/drivers/base/power/Makefile +++ b/drivers/base/power/Makefile @@ -1,5 +1,5 @@ obj-y := shutdown.o -obj-$(CONFIG_PM_SLEEP) += main.o suspend.o resume.o sysfs.o +obj-$(CONFIG_PM_SLEEP) += main.o sysfs.o obj-$(CONFIG_PM_TRACE) += trace.o ifeq ($(CONFIG_DEBUG_DRIVER),y) diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index eb9f38d0aa5..0ab4ab21f56 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -20,19 +20,24 @@ */ #include <linux/device.h> +#include <linux/kallsyms.h> #include <linux/mutex.h> +#include <linux/pm.h> +#include <linux/resume-trace.h> +#include "../base.h" #include "power.h" LIST_HEAD(dpm_active); -LIST_HEAD(dpm_off); -LIST_HEAD(dpm_off_irq); +static LIST_HEAD(dpm_off); +static LIST_HEAD(dpm_off_irq); -DEFINE_MUTEX(dpm_mtx); -DEFINE_MUTEX(dpm_list_mtx); +static DEFINE_MUTEX(dpm_mtx); +static DEFINE_MUTEX(dpm_list_mtx); int (*platform_enable_wakeup)(struct device *dev, int is_on); + int device_pm_add(struct device *dev) { int error; @@ -61,3 +66,334 @@ void device_pm_remove(struct device *dev) } +/*------------------------- Resume routines -------------------------*/ + +/** + * resume_device - Restore state for one device. + * @dev: Device. + * + */ + +static int resume_device(struct device * dev) +{ + int error = 0; + + TRACE_DEVICE(dev); + TRACE_RESUME(0); + + down(&dev->sem); + + if (dev->bus && dev->bus->resume) { + dev_dbg(dev,"resuming\n"); + error = dev->bus->resume(dev); + } + + if (!error && dev->type && dev->type->resume) { + dev_dbg(dev,"resuming\n"); + error = dev->type->resume(dev); + } + + if (!error && dev->class && dev->class->resume) { + dev_dbg(dev,"class resume\n"); + error = dev->class->resume(dev); + } + + up(&dev->sem); + + TRACE_RESUME(error); + return error; +} + + +static int resume_device_early(struct device * dev) +{ + int error = 0; + + TRACE_DEVICE(dev); + TRACE_RESUME(0); + if (dev->bus && dev->bus->resume_early) { + dev_dbg(dev,"EARLY resume\n"); + error = dev->bus->resume_early(dev); + } + TRACE_RESUME(error); + return error; +} + +/* + * Resume the devices that have either not gone through + * the late suspend, or that did go through it but also + * went through the early resume + */ +static void dpm_resume(void) +{ + mutex_lock(&dpm_list_mtx); + while(!list_empty(&dpm_off)) { + struct list_head * entry = dpm_off.next; + struct device * dev = to_device(entry); + + get_device(dev); + list_move_tail(entry, &dpm_active); + + mutex_unlock(&dpm_list_mtx); + resume_device(dev); + mutex_lock(&dpm_list_mtx); + put_device(dev); + } + mutex_unlock(&dpm_list_mtx); +} + + +/** + * device_resume - Restore state of each device in system. + * + * Walk the dpm_off list, remove each entry, resume the device, + * then add it to the dpm_active list. + */ + +void device_resume(void) +{ + might_sleep(); + mutex_lock(&dpm_mtx); + dpm_resume(); + mutex_unlock(&dpm_mtx); +} + +EXPORT_SYMBOL_GPL(device_resume); + + +/** + * dpm_power_up - Power on some devices. + * + * Walk the dpm_off_irq list and power each device up. This + * is used for devices that required they be powered down with + * interrupts disabled. As devices are powered on, they are moved + * to the dpm_active list. + * + * Interrupts must be disabled when calling this. + */ + +static void dpm_power_up(void) +{ + while(!list_empty(&dpm_off_irq)) { + struct list_head * entry = dpm_off_irq.next; + struct device * dev = to_device(entry); + + list_move_tail(entry, &dpm_off); + resume_device_early(dev); + } +} + + +/** + * device_power_up - Turn on all devices that need special attention. + * + * Power on system devices then devices that required we shut them down + * with interrupts disabled. + * Called with interrupts disabled. + */ + +void device_power_up(void) +{ + sysdev_resume(); + dpm_power_up(); +} + +EXPORT_SYMBOL_GPL(device_power_up); + + +/*------------------------- Suspend routines -------------------------*/ + +/* + * The entries in the dpm_active list are in a depth first order, simply + * because children are guaranteed to be discovered after parents, and + * are inserted at the back of the list on discovery. + * + * All list on the suspend path are done in reverse order, so we operate + * on the leaves of the device tree (or forests, depending on how you want + * to look at it ;) first. As nodes are removed from the back of the list, + * they are inserted into the front of their destintation lists. + * + * Things are the reverse on the resume path - iterations are done in + * forward order, and nodes are inserted at the back of their destination + * lists. This way, the ancestors will be accessed before their descendents. + */ + +static inline char *suspend_verb(u32 event) +{ + switch (event) { + case PM_EVENT_SUSPEND: return "suspend"; + case PM_EVENT_FREEZE: return "freeze"; + case PM_EVENT_PRETHAW: return "prethaw"; + default: return "(unknown suspend event)"; + } +} + + +static void +suspend_device_dbg(struct device *dev, pm_message_t state, char *info) +{ + dev_dbg(dev, "%s%s%s\n", info, suspend_verb(state.event), + ((state.event == PM_EVENT_SUSPEND) && device_may_wakeup(dev)) ? + ", may wakeup" : ""); +} + +/** + * suspend_device - Save state of one device. + * @dev: Device. + * @state: Power state device is entering. + */ + +static int suspend_device(struct device * dev, pm_message_t state) +{ + int error = 0; + + down(&dev->sem); + if (dev->power.power_state.event) { + dev_dbg(dev, "PM: suspend %d-->%d\n", + dev->power.power_state.event, state.event); + } + + if (dev->class && dev->class->suspend) { + suspend_device_dbg(dev, state, "class "); + error = dev->class->suspend(dev, state); + suspend_report_result(dev->class->suspend, error); + } + + if (!error && dev->type && dev->type->suspend) { + suspend_device_dbg(dev, state, "type "); + error = dev->type->suspend(dev, state); + suspend_report_result(dev->type->suspend, error); + } + + if (!error && dev->bus && dev->bus->suspend) { + suspend_device_dbg(dev, state, ""); + error = dev->bus->suspend(dev, state); + suspend_report_result(dev->bus->suspend, error); + } + up(&dev->sem); + return error; +} + + +/* + * This is called with interrupts off, only a single CPU + * running. We can't acquire a mutex or semaphore (and we don't + * need the protection) + */ +static int suspend_device_late(struct device *dev, pm_message_t state) +{ + int error = 0; + + if (dev->bus && dev->bus->suspend_late) { + suspend_device_dbg(dev, state, "LATE "); + error = dev->bus->suspend_late(dev, state); + suspend_report_result(dev->bus->suspend_late, error); + } + return error; +} + +/** + * device_suspend - Save state and stop all devices in system. + * @state: Power state to put each device in. + * + * Walk the dpm_active list, call ->suspend() for each device, and move + * it to the dpm_off list. + * + * (For historical reasons, if it returns -EAGAIN, that used to mean + * that the device would be called again with interrupts disabled. + * These days, we use the "suspend_late()" callback for that, so we + * print a warning and consider it an error). + * + * If we get a different error, try and back out. + * + * If we hit a failure with any of the devices, call device_resume() + * above to bring the suspended devices back to life. + * + */ + +int device_suspend(pm_message_t state) +{ + int error = 0; + + might_sleep(); + mutex_lock(&dpm_mtx); + mutex_lock(&dpm_list_mtx); + while (!list_empty(&dpm_active) && error == 0) { + struct list_head * entry = dpm_active.prev; + struct device * dev = to_device(entry); + + get_device(dev); + mutex_unlock(&dpm_list_mtx); + + error = suspend_device(dev, state); + + mutex_lock(&dpm_list_mtx); + + /* Check if the device got removed */ + if (!list_empty(&dev->power.entry)) { + /* Move it to the dpm_off list */ + if (!error) + list_move(&dev->power.entry, &dpm_off); + } + if (error) + printk(KERN_ERR "Could not suspend device %s: " + "error %d%s\n", + kobject_name(&dev->kobj), error, + error == -EAGAIN ? " (please convert to suspend_late)" : ""); + put_device(dev); + } + mutex_unlock(&dpm_list_mtx); + if (error) + dpm_resume(); + + mutex_unlock(&dpm_mtx); + return error; +} + +EXPORT_SYMBOL_GPL(device_suspend); + +/** + * device_power_down - Shut down special devices. + * @state: Power state to enter. + * + * Walk the dpm_off_irq list, calling ->power_down() for each device that + * couldn't power down the device with interrupts enabled. When we're + * done, power down system devices. + */ + +int device_power_down(pm_message_t state) +{ + int error = 0; + struct device * dev; + + while (!list_empty(&dpm_off)) { + struct list_head * entry = dpm_off.prev; + + dev = to_device(entry); + error = suspend_device_late(dev, state); + if (error) + goto Error; + list_move(&dev->power.entry, &dpm_off_irq); + } + + error = sysdev_suspend(state); + Done: + return error; + Error: + printk(KERN_ERR "Could not power down device %s: " + "error %d\n", kobject_name(&dev->kobj), error); + dpm_power_up(); + goto Done; +} + +EXPORT_SYMBOL_GPL(device_power_down); + +void __suspend_report_result(const char *function, void *fn, int ret) +{ + if (ret) { + printk(KERN_ERR "%s(): ", function); + print_fn_descriptor_symbol("%s() returns ", (unsigned long)fn); + printk("%d\n", ret); + } +} +EXPORT_SYMBOL_GPL(__suspend_report_result); diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h index 49e64dbcce9..5c4efd493fa 100644 --- a/drivers/base/power/power.h +++ b/drivers/base/power/power.h @@ -11,32 +11,11 @@ extern void device_shutdown(void); * main.c */ -/* - * Used to synchronize global power management operations. - */ -extern struct mutex dpm_mtx; - -/* - * Used to serialize changes to the dpm_* lists. - */ -extern struct mutex dpm_list_mtx; - -/* - * The PM lists. - */ -extern struct list_head dpm_active; -extern struct list_head dpm_off; -extern struct list_head dpm_off_irq; - - -static inline struct dev_pm_info * to_pm_info(struct list_head * entry) -{ - return container_of(entry, struct dev_pm_info, entry); -} +extern struct list_head dpm_active; /* The active device list */ static inline struct device * to_device(struct list_head * entry) { - return container_of(to_pm_info(entry), struct device, power); + return container_of(entry, struct device, power.entry); } extern int device_pm_add(struct device *); @@ -49,13 +28,6 @@ extern void device_pm_remove(struct device *); extern int dpm_sysfs_add(struct device *); extern void dpm_sysfs_remove(struct device *); -/* - * resume.c - */ - -extern void dpm_resume(void); -extern void dpm_power_up(void); - #else /* CONFIG_PM_SLEEP */ diff --git a/drivers/base/power/resume.c b/drivers/base/power/resume.c deleted file mode 100644 index 67948bac993..00000000000 --- a/drivers/base/power/resume.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * resume.c - Functions for waking devices up. - * - * Copyright (c) 2003 Patrick Mochel - * Copyright (c) 2003 Open Source Development Labs - * - * This file is released under the GPLv2 - * - */ - -#include <linux/device.h> -#include <linux/resume-trace.h> -#include "../base.h" -#include "power.h" - - -/** - * resume_device - Restore state for one device. - * @dev: Device. - * - */ - -static int resume_device(struct device * dev) -{ - int error = 0; - - TRACE_DEVICE(dev); - TRACE_RESUME(0); - - down(&dev->sem); - - if (dev->bus && dev->bus->resume) { - dev_dbg(dev,"resuming\n"); - error = dev->bus->resume(dev); - } - - if (!error && dev->type && dev->type->resume) { - dev_dbg(dev,"resuming\n"); - error = dev->type->resume(dev); - } - - if (!error && dev->class && dev->class->resume) { - dev_dbg(dev,"class resume\n"); - error = dev->class->resume(dev); - } - - up(&dev->sem); - - TRACE_RESUME(error); - return error; -} - - -static int resume_device_early(struct device * dev) -{ - int error = 0; - - TRACE_DEVICE(dev); - TRACE_RESUME(0); - if (dev->bus && dev->bus->resume_early) { - dev_dbg(dev,"EARLY resume\n"); - error = dev->bus->resume_early(dev); - } - TRACE_RESUME(error); - return error; -} - -/* - * Resume the devices that have either not gone through - * the late suspend, or that did go through it but also - * went through the early resume - */ -void dpm_resume(void) -{ - mutex_lock(&dpm_list_mtx); - while(!list_empty(&dpm_off)) { - struct list_head * entry = dpm_off.next; - struct device * dev = to_device(entry); - - get_device(dev); - list_move_tail(entry, &dpm_active); - - mutex_unlock(&dpm_list_mtx); - resume_device(dev); - mutex_lock(&dpm_list_mtx); - put_device(dev); - } - mutex_unlock(&dpm_list_mtx); -} - - -/** - * device_resume - Restore state of each device in system. - * - * Walk the dpm_off list, remove each entry, resume the device, - * then add it to the dpm_active list. - */ - -void device_resume(void) -{ - might_sleep(); - mutex_lock(&dpm_mtx); - dpm_resume(); - mutex_unlock(&dpm_mtx); -} - -EXPORT_SYMBOL_GPL(device_resume); - - -/** - * dpm_power_up - Power on some devices. - * - * Walk the dpm_off_irq list and power each device up. This - * is used for devices that required they be powered down with - * interrupts disabled. As devices are powered on, they are moved - * to the dpm_active list. - * - * Interrupts must be disabled when calling this. - */ - -void dpm_power_up(void) -{ - while(!list_empty(&dpm_off_irq)) { - struct list_head * entry = dpm_off_irq.next; - struct device * dev = to_device(entry); - - list_move_tail(entry, &dpm_off); - resume_device_early(dev); - } -} - - -/** - * device_power_up - Turn on all devices that need special attention. - * - * Power on system devices then devices that required we shut them down - * with interrupts disabled. - * Called with interrupts disabled. - */ - -void device_power_up(void) -{ - sysdev_resume(); - dpm_power_up(); -} - -EXPORT_SYMBOL_GPL(device_power_up); - - diff --git a/drivers/base/power/suspend.c b/drivers/base/power/suspend.c deleted file mode 100644 index 204517afb15..00000000000 --- a/drivers/base/power/suspend.c +++ /dev/null @@ -1,210 +0,0 @@ -/* - * suspend.c - Functions for putting devices to sleep. - * - * Copyright (c) 2003 Patrick Mochel - * Copyright (c) 2003 Open Source Development Labs - * - * This file is released under the GPLv2 - * - */ - -#include <linux/device.h> -#include <linux/kallsyms.h> -#include <linux/pm.h> -#include "../base.h" -#include "power.h" - -/* - * The entries in the dpm_active list are in a depth first order, simply - * because children are guaranteed to be discovered after parents, and - * are inserted at the back of the list on discovery. - * - * All list on the suspend path are done in reverse order, so we operate - * on the leaves of the device tree (or forests, depending on how you want - * to look at it ;) first. As nodes are removed from the back of the list, - * they are inserted into the front of their destintation lists. - * - * Things are the reverse on the resume path - iterations are done in - * forward order, and nodes are inserted at the back of their destination - * lists. This way, the ancestors will be accessed before their descendents. - */ - -static inline char *suspend_verb(u32 event) -{ - switch (event) { - case PM_EVENT_SUSPEND: return "suspend"; - case PM_EVENT_FREEZE: return "freeze"; - case PM_EVENT_PRETHAW: return "prethaw"; - default: return "(unknown suspend event)"; - } -} - - -static void -suspend_device_dbg(struct device *dev, pm_message_t state, char *info) -{ - dev_dbg(dev, "%s%s%s\n", info, suspend_verb(state.event), - ((state.event == PM_EVENT_SUSPEND) && device_may_wakeup(dev)) ? - ", may wakeup" : ""); -} - -/** - * suspend_device - Save state of one device. - * @dev: Device. - * @state: Power state device is entering. - */ - -static int suspend_device(struct device * dev, pm_message_t state) -{ - int error = 0; - - down(&dev->sem); - if (dev->power.power_state.event) { - dev_dbg(dev, "PM: suspend %d-->%d\n", - dev->power.power_state.event, state.event); - } - - if (dev->class && dev->class->suspend) { - suspend_device_dbg(dev, state, "class "); - error = dev->class->suspend(dev, state); - suspend_report_result(dev->class->suspend, error); - } - - if (!error && dev->type && dev->type->suspend) { - suspend_device_dbg(dev, state, "type "); - error = dev->type->suspend(dev, state); - suspend_report_result(dev->type->suspend, error); - } - - if (!error && dev->bus && dev->bus->suspend) { - suspend_device_dbg(dev, state, ""); - error = dev->bus->suspend(dev, state); - suspend_report_result(dev->bus->suspend, error); - } - up(&dev->sem); - return error; -} - - -/* - * This is called with interrupts off, only a single CPU - * running. We can't acquire a mutex or semaphore (and we don't - * need the protection) - */ -static int suspend_device_late(struct device *dev, pm_message_t state) -{ - int error = 0; - - if (dev->bus && dev->bus->suspend_late) { - suspend_device_dbg(dev, state, "LATE "); - error = dev->bus->suspend_late(dev, state); - suspend_report_result(dev->bus->suspend_late, error); - } - return error; -} - -/** - * device_suspend - Save state and stop all devices in system. - * @state: Power state to put each device in. - * - * Walk the dpm_active list, call ->suspend() for each device, and move - * it to the dpm_off list. - * - * (For historical reasons, if it returns -EAGAIN, that used to mean - * that the device would be called again with interrupts disabled. - * These days, we use the "suspend_late()" callback for that, so we - * print a warning and consider it an error). - * - * If we get a different error, try and back out. - * - * If we hit a failure with any of the devices, call device_resume() - * above to bring the suspended devices back to life. - * - */ - -int device_suspend(pm_message_t state) -{ - int error = 0; - - might_sleep(); - mutex_lock(&dpm_mtx); - mutex_lock(&dpm_list_mtx); - while (!list_empty(&dpm_active) && error == 0) { - struct list_head * entry = dpm_active.prev; - struct device * dev = to_device(entry); - - get_device(dev); - mutex_unlock(&dpm_list_mtx); - - error = suspend_device(dev, state); - - mutex_lock(&dpm_list_mtx); - - /* Check if the device got removed */ - if (!list_empty(&dev->power.entry)) { - /* Move it to the dpm_off list */ - if (!error) - list_move(&dev->power.entry, &dpm_off); - } - if (error) - printk(KERN_ERR "Could not suspend device %s: " - "error %d%s\n", - kobject_name(&dev->kobj), error, - error == -EAGAIN ? " (please convert to suspend_late)" : ""); - put_device(dev); - } - mutex_unlock(&dpm_list_mtx); - if (error) - dpm_resume(); - - mutex_unlock(&dpm_mtx); - return error; -} - -EXPORT_SYMBOL_GPL(device_suspend); - -/** - * device_power_down - Shut down special devices. - * @state: Power state to enter. - * - * Walk the dpm_off_irq list, calling ->power_down() for each device that - * couldn't power down the device with interrupts enabled. When we're - * done, power down system devices. - */ - -int device_power_down(pm_message_t state) -{ - int error = 0; - struct device * dev; - - while (!list_empty(&dpm_off)) { - struct list_head * entry = dpm_off.prev; - - dev = to_device(entry); - error = suspend_device_late(dev, state); - if (error) - goto Error; - list_move(&dev->power.entry, &dpm_off_irq); - } - - error = sysdev_suspend(state); - Done: - return error; - Error: - printk(KERN_ERR "Could not power down device %s: " - "error %d\n", kobject_name(&dev->kobj), error); - dpm_power_up(); - goto Done; -} - -EXPORT_SYMBOL_GPL(device_power_down); - -void __suspend_report_result(const char *function, void *fn, int ret) -{ - if (ret) { - printk(KERN_ERR "%s(): ", function); - print_fn_descriptor_symbol("%s() returns ", (unsigned long)fn); - printk("%d\n", ret); - } -} -EXPORT_SYMBOL_GPL(__suspend_report_result); |