aboutsummaryrefslogtreecommitdiff
path: root/drivers/cdrom/aztcd.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/cdrom/aztcd.c')
-rw-r--r--drivers/cdrom/aztcd.c2492
1 files changed, 0 insertions, 2492 deletions
diff --git a/drivers/cdrom/aztcd.c b/drivers/cdrom/aztcd.c
deleted file mode 100644
index d7fbfaae244..00000000000
--- a/drivers/cdrom/aztcd.c
+++ /dev/null
@@ -1,2492 +0,0 @@
-#define AZT_VERSION "2.60"
-
-/* $Id: aztcd.c,v 2.60 1997/11/29 09:51:19 root Exp root $
- linux/drivers/block/aztcd.c - Aztech CD268 CDROM driver
-
- Copyright (C) 1994-98 Werner Zimmermann(Werner.Zimmermann@fht-esslingen.de)
-
- based on Mitsumi CDROM driver by Martin Hariss and preworks by
- Eberhard Moenkeberg; contains contributions by Joe Nardone and Robby
- Schirmer.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- HISTORY
- V0.0 Adaption to Aztech CD268-01A Version 1.3
- Version is PRE_ALPHA, unresolved points:
- 1. I use busy wait instead of timer wait in STEN_LOW,DTEN_LOW
- thus driver causes CPU overhead and is very slow
- 2. could not find a way to stop the drive, when it is
- in data read mode, therefore I had to set
- msf.end.min/sec/frame to 0:0:1 (in azt_poll); so only one
- frame can be read in sequence, this is also the reason for
- 3. getting 'timeout in state 4' messages, but nevertheless
- it works
- W.Zimmermann, Oct. 31, 1994
- V0.1 Version is ALPHA, problems #2 and #3 resolved.
- W.Zimmermann, Nov. 3, 1994
- V0.2 Modification to some comments, debugging aids for partial test
- with Borland C under DOS eliminated. Timer interrupt wait
- STEN_LOW_WAIT additionally to busy wait for STEN_LOW implemented;
- use it only for the 'slow' commands (ACMD_GET_Q_CHANNEL, ACMD_
- SEEK_TO_LEAD_IN), all other commands are so 'fast', that busy
- waiting seems better to me than interrupt rescheduling.
- Besides that, when used in the wrong place, STEN_LOW_WAIT causes
- kernel panic.
- In function aztPlay command ACMD_PLAY_AUDIO added, should make
- audio functions work. The Aztech drive needs different commands
- to read data tracks and play audio tracks.
- W.Zimmermann, Nov. 8, 1994
- V0.3 Recognition of missing drive during boot up improved (speeded up).
- W.Zimmermann, Nov. 13, 1994
- V0.35 Rewrote the control mechanism in azt_poll (formerly mcd_poll)
- including removal of all 'goto' commands. :-);
- J. Nardone, Nov. 14, 1994
- V0.4 Renamed variables and constants to 'azt' instead of 'mcd'; had
- to make some "compatibility" defines in azt.h; please note,
- that the source file was renamed to azt.c, the include file to
- azt.h
- Speeded up drive recognition during init (will be a little bit
- slower than before if no drive is installed!); suggested by
- Robby Schirmer.
- read_count declared volatile and set to AZT_BUF_SIZ to make
- drive faster (now 300kB/sec, was 60kB/sec before, measured
- by 'time dd if=/dev/cdrom of=/dev/null bs=2048 count=4096';
- different AZT_BUF_SIZes were test, above 16 no further im-
- provement seems to be possible; suggested by E.Moenkeberg.
- W.Zimmermann, Nov. 18, 1994
- V0.42 Included getAztStatus command in GetQChannelInfo() to allow
- reading Q-channel info on audio disks, if drive is stopped,
- and some other bug fixes in the audio stuff, suggested by
- Robby Schirmer.
- Added more ioctls (reading data in mode 1 and mode 2).
- Completely removed the old azt_poll() routine.
- Detection of ORCHID CDS-3110 in aztcd_init implemented.
- Additional debugging aids (see the readme file).
- W.Zimmermann, Dec. 9, 1994
- V0.50 Autodetection of drives implemented.
- W.Zimmermann, Dec. 12, 1994
- V0.52 Prepared for including in the standard kernel, renamed most
- variables to contain 'azt', included autoconf.h
- W.Zimmermann, Dec. 16, 1994
- V0.6 Version for being included in the standard Linux kernel.
- Renamed source and header file to aztcd.c and aztcd.h
- W.Zimmermann, Dec. 24, 1994
- V0.7 Changed VERIFY_READ to VERIFY_WRITE in aztcd_ioctl, case
- CDROMREADMODE1 and CDROMREADMODE2; bug fix in the ioctl,
- which causes kernel crashes when playing audio, changed
- include-files (config.h instead of autoconf.h, removed
- delay.h)
- W.Zimmermann, Jan. 8, 1995
- V0.72 Some more modifications for adaption to the standard kernel.
- W.Zimmermann, Jan. 16, 1995
- V0.80 aztcd is now part of the standard kernel since version 1.1.83.
- Modified the SET_TIMER and CLEAR_TIMER macros to comply with
- the new timer scheme.
- W.Zimmermann, Jan. 21, 1995
- V0.90 Included CDROMVOLCTRL, but with my Aztech drive I can only turn
- the channels on and off. If it works better with your drive,
- please mail me. Also implemented ACMD_CLOSE for CDROMSTART.
- W.Zimmermann, Jan. 24, 1995
- V1.00 Implemented close and lock tray commands. Patches supplied by
- Frank Racis
- Added support for loadable MODULEs, so aztcd can now also be
- loaded by insmod and removed by rmmod during run time
- Werner Zimmermann, Mar. 24, 95
- V1.10 Implemented soundcard configuration for Orchid CDS-3110 drives
- connected to Soundwave32 cards. Release for LST 2.1.
- (still experimental)
- Werner Zimmermann, May 8, 95
- V1.20 Implemented limited support for DOSEMU0.60's cdrom.c. Now it works, but
- sometimes DOSEMU may hang for 30 seconds or so. A fully functional ver-
- sion needs an update of Dosemu0.60's cdrom.c, which will come with the
- next revision of Dosemu.
- Also Soundwave32 support now works.
- Werner Zimmermann, May 22, 95
- V1.30 Auto-eject feature. Inspired by Franc Racis (racis@psu.edu)
- Werner Zimmermann, July 4, 95
- V1.40 Started multisession support. Implementation copied from mcdx.c
- by Heiko Schlittermann. Not tested yet.
- Werner Zimmermann, July 15, 95
- V1.50 Implementation of ioctl CDROMRESET, continued multisession, began
- XA, but still untested. Heavy modifications to drive status de-
- tection.
- Werner Zimmermann, July 25, 95
- V1.60 XA support now should work. Speeded up drive recognition in cases,
- where no drive is installed.
- Werner Zimmermann, August 8, 1995
- V1.70 Multisession support now is completed, but there is still not
- enough testing done. If you can test it, please contact me. For
- details please read Documentation/cdrom/aztcd
- Werner Zimmermann, August 19, 1995
- V1.80 Modification to suit the new kernel boot procedure introduced
- with kernel 1.3.33. Will definitely not work with older kernels.
- Programming done by Linus himself.
- Werner Zimmermann, October 11, 1995
- V1.90 Support for Conrad TXC drives, thank's to Jochen Kunz and Olaf Kaluza.
- Werner Zimmermann, October 21, 1995
- V2.00 Changed #include "blk.h" to <linux/blk.h> as the directory
- structure was changed. README.aztcd is now /usr/src/docu-
- mentation/cdrom/aztcd
- Werner Zimmermann, November 10, 95
- V2.10 Started to modify azt_poll to prevent reading beyond end of
- tracks.
- Werner Zimmermann, December 3, 95
- V2.20 Changed some comments
- Werner Zimmermann, April 1, 96
- V2.30 Implemented support for CyCDROM CR520, CR940, Code for CR520
- delivered by H.Berger with preworks by E.Moenkeberg.
- Werner Zimmermann, April 29, 96
- V2.40 Reorganized the placement of functions in the source code file
- to reflect the layered approach; did not actually change code
- Werner Zimmermann, May 1, 96
- V2.50 Heiko Eissfeldt suggested to remove some VERIFY_READs in
- aztcd_ioctl; check_aztcd_media_change modified
- Werner Zimmermann, May 16, 96
- V2.60 Implemented Auto-Probing; made changes for kernel's 2.1.xx blocksize
- Adaption to linux kernel > 2.1.0
- Werner Zimmermann, Nov 29, 97
-
- November 1999 -- Make kernel-parameter implementation work with 2.3.x
- Removed init_module & cleanup_module in favor of
- module_init & module_exit.
- Torben Mathiasen <tmm@image.dk>
-*/
-
-#include <linux/blkdev.h>
-#include "aztcd.h"
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/mm.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/cdrom.h>
-#include <linux/ioport.h>
-#include <linux/string.h>
-#include <linux/major.h>
-
-#include <linux/init.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-
-#include <asm/uaccess.h>
-
-/*###########################################################################
- Defines
- ###########################################################################
-*/
-
-#define MAJOR_NR AZTECH_CDROM_MAJOR
-#define QUEUE (azt_queue)
-#define CURRENT elv_next_request(azt_queue)
-#define SET_TIMER(func, jifs) delay_timer.expires = jiffies + (jifs); \
- delay_timer.function = (void *) (func); \
- add_timer(&delay_timer);
-
-#define CLEAR_TIMER del_timer(&delay_timer);
-
-#define RETURNM(message,value) {printk("aztcd: Warning: %s failed\n",message);\
- return value;}
-#define RETURN(message) {printk("aztcd: Warning: %s failed\n",message);\
- return;}
-
-/* Macros to switch the IDE-interface to the slave device and back to the master*/
-#define SWITCH_IDE_SLAVE outb_p(0xa0,azt_port+6); \
- outb_p(0x10,azt_port+6); \
- outb_p(0x00,azt_port+7); \
- outb_p(0x10,azt_port+6);
-#define SWITCH_IDE_MASTER outb_p(0xa0,azt_port+6);
-
-
-#if 0
-#define AZT_TEST
-#define AZT_TEST1 /* <int-..> */
-#define AZT_TEST2 /* do_aztcd_request */
-#define AZT_TEST3 /* AZT_S_state */
-#define AZT_TEST4 /* QUICK_LOOP-counter */
-#define AZT_TEST5 /* port(1) state */
-#define AZT_DEBUG
-#define AZT_DEBUG_MULTISESSION
-#endif
-
-static struct request_queue *azt_queue;
-
-static int current_valid(void)
-{
- return CURRENT &&
- rq_data_dir(CURRENT) == READ &&
- CURRENT->sector != -1;
-}
-
-#define AFL_STATUSorDATA (AFL_STATUS | AFL_DATA)
-#define AZT_BUF_SIZ 16
-
-#define READ_TIMEOUT 3000
-
-#define azt_port aztcd /*needed for the modutils */
-
-/*##########################################################################
- Type Definitions
- ##########################################################################
-*/
-enum azt_state_e { AZT_S_IDLE, /* 0 */
- AZT_S_START, /* 1 */
- AZT_S_MODE, /* 2 */
- AZT_S_READ, /* 3 */
- AZT_S_DATA, /* 4 */
- AZT_S_STOP, /* 5 */
- AZT_S_STOPPING /* 6 */
-};
-enum azt_read_modes { AZT_MODE_0, /*read mode for audio disks, not supported by Aztech firmware */
- AZT_MODE_1, /*read mode for normal CD-ROMs */
- AZT_MODE_2 /*read mode for XA CD-ROMs */
-};
-
-/*##########################################################################
- Global Variables
- ##########################################################################
-*/
-static int aztPresent = 0;
-
-static volatile int azt_transfer_is_active = 0;
-
-static char azt_buf[CD_FRAMESIZE_RAW * AZT_BUF_SIZ]; /*buffer for block size conversion */
-#if AZT_PRIVATE_IOCTLS
-static char buf[CD_FRAMESIZE_RAW]; /*separate buffer for the ioctls */
-#endif
-
-static volatile int azt_buf_bn[AZT_BUF_SIZ], azt_next_bn;
-static volatile int azt_buf_in, azt_buf_out = -1;
-static volatile int azt_error = 0;
-static int azt_open_count = 0;
-static volatile enum azt_state_e azt_state = AZT_S_IDLE;
-#ifdef AZT_TEST3
-static volatile enum azt_state_e azt_state_old = AZT_S_STOP;
-static volatile int azt_st_old = 0;
-#endif
-static volatile enum azt_read_modes azt_read_mode = AZT_MODE_1;
-
-static int azt_mode = -1;
-static volatile int azt_read_count = 1;
-
-static int azt_port = AZT_BASE_ADDR;
-
-module_param(azt_port, int, 0);
-
-static int azt_port_auto[16] = AZT_BASE_AUTO;
-
-static char azt_cont = 0;
-static char azt_init_end = 0;
-static char azt_auto_eject = AZT_AUTO_EJECT;
-
-static int AztTimeout, AztTries;
-static DECLARE_WAIT_QUEUE_HEAD(azt_waitq);
-static DEFINE_TIMER(delay_timer, NULL, 0, 0);
-
-static struct azt_DiskInfo DiskInfo;
-static struct azt_Toc Toc[MAX_TRACKS];
-static struct azt_Play_msf azt_Play;
-
-static int aztAudioStatus = CDROM_AUDIO_NO_STATUS;
-static char aztDiskChanged = 1;
-static char aztTocUpToDate = 0;
-
-static unsigned char aztIndatum;
-static unsigned long aztTimeOutCount;
-static int aztCmd = 0;
-
-static DEFINE_SPINLOCK(aztSpin);
-
-/*###########################################################################
- Function Prototypes
- ###########################################################################
-*/
-/* CDROM Drive Low Level I/O Functions */
-static void aztStatTimer(void);
-
-/* CDROM Drive Command Functions */
-static int aztGetDiskInfo(void);
-#if AZT_MULTISESSION
-static int aztGetMultiDiskInfo(void);
-#endif
-static int aztGetToc(int multi);
-
-/* Kernel Interface Functions */
-static int check_aztcd_media_change(struct gendisk *disk);
-static int aztcd_ioctl(struct inode *ip, struct file *fp, unsigned int cmd,
- unsigned long arg);
-static int aztcd_open(struct inode *ip, struct file *fp);
-static int aztcd_release(struct inode *inode, struct file *file);
-
-static struct block_device_operations azt_fops = {
- .owner = THIS_MODULE,
- .open = aztcd_open,
- .release = aztcd_release,
- .ioctl = aztcd_ioctl,
- .media_changed = check_aztcd_media_change,
-};
-
-/* Aztcd State Machine: Controls Drive Operating State */
-static void azt_poll(void);
-
-/* Miscellaneous support functions */
-static void azt_hsg2msf(long hsg, struct msf *msf);
-static long azt_msf2hsg(struct msf *mp);
-static void azt_bin2bcd(unsigned char *p);
-static int azt_bcd2bin(unsigned char bcd);
-
-/*##########################################################################
- CDROM Drive Low Level I/O Functions
- ##########################################################################
-*/
-/* Macros for the drive hardware interface handshake, these macros use
- busy waiting */
-/* Wait for OP_OK = drive answers with AFL_OP_OK after receiving a command*/
-# define OP_OK op_ok()
-static void op_ok(void)
-{
- aztTimeOutCount = 0;
- do {
- aztIndatum = inb(DATA_PORT);
- aztTimeOutCount++;
- if (aztTimeOutCount >= AZT_TIMEOUT) {
- printk("aztcd: Error Wait OP_OK\n");
- break;
- }
- } while (aztIndatum != AFL_OP_OK);
-}
-
-/* Wait for PA_OK = drive answers with AFL_PA_OK after receiving parameters*/
-#if 0
-# define PA_OK pa_ok()
-static void pa_ok(void)
-{
- aztTimeOutCount = 0;
- do {
- aztIndatum = inb(DATA_PORT);
- aztTimeOutCount++;
- if (aztTimeOutCount >= AZT_TIMEOUT) {
- printk("aztcd: Error Wait PA_OK\n");
- break;
- }
- } while (aztIndatum != AFL_PA_OK);
-}
-#endif
-
-/* Wait for STEN=Low = handshake signal 'AFL_.._OK available or command executed*/
-# define STEN_LOW sten_low()
-static void sten_low(void)
-{
- aztTimeOutCount = 0;
- do {
- aztIndatum = inb(STATUS_PORT);
- aztTimeOutCount++;
- if (aztTimeOutCount >= AZT_TIMEOUT) {
- if (azt_init_end)
- printk
- ("aztcd: Error Wait STEN_LOW commands:%x\n",
- aztCmd);
- break;
- }
- } while (aztIndatum & AFL_STATUS);
-}
-
-/* Wait for DTEN=Low = handshake signal 'Data available'*/
-# define DTEN_LOW dten_low()
-static void dten_low(void)
-{
- aztTimeOutCount = 0;
- do {
- aztIndatum = inb(STATUS_PORT);
- aztTimeOutCount++;
- if (aztTimeOutCount >= AZT_TIMEOUT) {
- printk("aztcd: Error Wait DTEN_OK\n");
- break;
- }
- } while (aztIndatum & AFL_DATA);
-}
-
-/*
- * Macro for timer wait on STEN=Low, should only be used for 'slow' commands;
- * may cause kernel panic when used in the wrong place
-*/
-#define STEN_LOW_WAIT statusAzt()
-static void statusAzt(void)
-{
- AztTimeout = AZT_STATUS_DELAY;
- SET_TIMER(aztStatTimer, HZ / 100);
- sleep_on(&azt_waitq);
- if (AztTimeout <= 0)
- printk("aztcd: Error Wait STEN_LOW_WAIT command:%x\n",
- aztCmd);
- return;
-}
-
-static void aztStatTimer(void)
-{
- if (!(inb(STATUS_PORT) & AFL_STATUS)) {
- wake_up(&azt_waitq);
- return;
- }
- AztTimeout--;
- if (AztTimeout <= 0) {
- wake_up(&azt_waitq);
- printk("aztcd: Error aztStatTimer: Timeout\n");
- return;
- }
- SET_TIMER(aztStatTimer, HZ / 100);
-}
-
-/*##########################################################################
- CDROM Drive Command Functions
- ##########################################################################
-*/
-/*
- * Send a single command, return -1 on error, else 0
-*/
-static int aztSendCmd(int cmd)
-{
- unsigned char data;
- int retry;
-
-#ifdef AZT_DEBUG
- printk("aztcd: Executing command %x\n", cmd);
-#endif
-
- if ((azt_port == 0x1f0) || (azt_port == 0x170))
- SWITCH_IDE_SLAVE; /*switch IDE interface to slave configuration */
-
- aztCmd = cmd;
- outb(POLLED, MODE_PORT);
- do {
- if (inb(STATUS_PORT) & AFL_STATUS)
- break;
- inb(DATA_PORT); /* if status left from last command, read and */
- } while (1); /* discard it */
- do {
- if (inb(STATUS_PORT) & AFL_DATA)
- break;
- inb(DATA_PORT); /* if data left from last command, read and */
- } while (1); /* discard it */
- for (retry = 0; retry < AZT_RETRY_ATTEMPTS; retry++) {
- outb((unsigned char) cmd, CMD_PORT);
- STEN_LOW;
- data = inb(DATA_PORT);
- if (data == AFL_OP_OK) {
- return 0;
- } /*OP_OK? */
- if (data == AFL_OP_ERR) {
- STEN_LOW;
- data = inb(DATA_PORT);
- printk
- ("### Error 1 aztcd: aztSendCmd %x Error Code %x\n",
- cmd, data);
- }
- }
- if (retry >= AZT_RETRY_ATTEMPTS) {
- printk("### Error 2 aztcd: aztSendCmd %x \n", cmd);
- azt_error = 0xA5;
- }
- RETURNM("aztSendCmd", -1);
-}
-
-/*
- * Send a play or read command to the drive, return -1 on error, else 0
-*/
-static int sendAztCmd(int cmd, struct azt_Play_msf *params)
-{
- unsigned char data;
- int retry;
-
-#ifdef AZT_DEBUG
- printk("aztcd: play start=%02x:%02x:%02x end=%02x:%02x:%02x\n",
- params->start.min, params->start.sec, params->start.frame,
- params->end.min, params->end.sec, params->end.frame);
-#endif
- for (retry = 0; retry < AZT_RETRY_ATTEMPTS; retry++) {
- aztSendCmd(cmd);
- outb(params->start.min, CMD_PORT);
- outb(params->start.sec, CMD_PORT);
- outb(params->start.frame, CMD_PORT);
- outb(params->end.min, CMD_PORT);
- outb(params->end.sec, CMD_PORT);
- outb(params->end.frame, CMD_PORT);
- STEN_LOW;
- data = inb(DATA_PORT);
- if (data == AFL_PA_OK) {
- return 0;
- } /*PA_OK ? */
- if (data == AFL_PA_ERR) {
- STEN_LOW;
- data = inb(DATA_PORT);
- printk
- ("### Error 1 aztcd: sendAztCmd %x Error Code %x\n",
- cmd, data);
- }
- }
- if (retry >= AZT_RETRY_ATTEMPTS) {
- printk("### Error 2 aztcd: sendAztCmd %x\n ", cmd);
- azt_error = 0xA5;
- }
- RETURNM("sendAztCmd", -1);
-}
-
-/*
- * Send a seek command to the drive, return -1 on error, else 0
-*/
-static int aztSeek(struct azt_Play_msf *params)
-{
- unsigned char data;
- int retry;
-
-#ifdef AZT_DEBUG
- printk("aztcd: aztSeek %02x:%02x:%02x\n",
- params->start.min, params->start.sec, params->start.frame);
-#endif
- for (retry = 0; retry < AZT_RETRY_ATTEMPTS; retry++) {
- aztSendCmd(ACMD_SEEK);
- outb(params->start.min, CMD_PORT);
- outb(params->start.sec, CMD_PORT);
- outb(params->start.frame, CMD_PORT);
- STEN_LOW;
- data = inb(DATA_PORT);
- if (data == AFL_PA_OK) {
- return 0;
- } /*PA_OK ? */
- if (data == AFL_PA_ERR) {
- STEN_LOW;
- data = inb(DATA_PORT);
- printk("### Error 1 aztcd: aztSeek\n");
- }
- }
- if (retry >= AZT_RETRY_ATTEMPTS) {
- printk("### Error 2 aztcd: aztSeek\n ");
- azt_error = 0xA5;
- }
- RETURNM("aztSeek", -1);
-}
-
-/* Send a Set Disk Type command
- does not seem to work with Aztech drives, behavior is completely indepen-
- dent on which mode is set ???
-*/
-static int aztSetDiskType(int type)
-{
- unsigned char data;
- int retry;
-
-#ifdef AZT_DEBUG
- printk("aztcd: set disk type command: type= %i\n", type);
-#endif
- for (retry = 0; retry < AZT_RETRY_ATTEMPTS; retry++) {
- aztSendCmd(ACMD_SET_DISK_TYPE);
- outb(type, CMD_PORT);
- STEN_LOW;
- data = inb(DATA_PORT);
- if (data == AFL_PA_OK) { /*PA_OK ? */
- azt_read_mode = type;
- return 0;
- }
- if (data == AFL_PA_ERR) {
- STEN_LOW;
- data = inb(DATA_PORT);
- printk
- ("### Error 1 aztcd: aztSetDiskType %x Error Code %x\n",
- type, data);
- }
- }
- if (retry >= AZT_RETRY_ATTEMPTS) {
- printk("### Error 2 aztcd: aztSetDiskType %x\n ", type);
- azt_error = 0xA5;
- }
- RETURNM("aztSetDiskType", -1);
-}
-
-
-/* used in azt_poll to poll the status, expects another program to issue a
- * ACMD_GET_STATUS directly before
- */
-static int aztStatus(void)
-{
- int st;
-/* int i;
-
- i = inb(STATUS_PORT) & AFL_STATUS; is STEN=0? ???
- if (!i)
-*/ STEN_LOW;
- if (aztTimeOutCount < AZT_TIMEOUT) {
- st = inb(DATA_PORT) & 0xFF;
- return st;
- } else
- RETURNM("aztStatus", -1);
-}
-
-/*
- * Get the drive status
- */
-static int getAztStatus(void)
-{
- int st;
-
- if (aztSendCmd(ACMD_GET_STATUS))
- RETURNM("getAztStatus 1", -1);
- STEN_LOW;
- st = inb(DATA_PORT) & 0xFF;
-#ifdef AZT_DEBUG
- printk("aztcd: Status = %x\n", st);
-#endif
- if ((st == 0xFF) || (st & AST_CMD_CHECK)) {
- printk
- ("aztcd: AST_CMD_CHECK error or no status available\n");
- return -1;
- }
-
- if (((st & AST_MODE_BITS) != AST_BUSY)
- && (aztAudioStatus == CDROM_AUDIO_PLAY))
- /* XXX might be an error? look at q-channel? */
- aztAudioStatus = CDROM_AUDIO_COMPLETED;
-
- if ((st & AST_DSK_CHG) || (st & AST_NOT_READY)) {
- aztDiskChanged = 1;
- aztTocUpToDate = 0;
- aztAudioStatus = CDROM_AUDIO_NO_STATUS;
- }
- return st;
-}
-
-
-/*
- * Send a 'Play' command and get the status. Use only from the top half.
- */
-static int aztPlay(struct azt_Play_msf *arg)
-{
- if (sendAztCmd(ACMD_PLAY_AUDIO, arg) < 0)
- RETURNM("aztPlay", -1);
- return 0;
-}
-
-/*
- * Subroutines to automatically close the door (tray) and
- * lock it closed when the cd is mounted. Leave the tray
- * locking as an option
- */
-static void aztCloseDoor(void)
-{
- aztSendCmd(ACMD_CLOSE);
- STEN_LOW;
- return;
-}
-
-static void aztLockDoor(void)
-{
-#if AZT_ALLOW_TRAY_LOCK
- aztSendCmd(ACMD_LOCK);
- STEN_LOW;
-#endif
- return;
-}
-
-static void aztUnlockDoor(void)
-{
-#if AZT_ALLOW_TRAY_LOCK
- aztSendCmd(ACMD_UNLOCK);
- STEN_LOW;
-#endif
- return;
-}
-
-/*
- * Read a value from the drive. Should return quickly, so a busy wait
- * is used to avoid excessive rescheduling. The read command itself must
- * be issued with aztSendCmd() directly before
- */
-static int aztGetValue(unsigned char *result)
-{
- int s;
-
- STEN_LOW;
- if (aztTimeOutCount >= AZT_TIMEOUT) {
- printk("aztcd: aztGetValue timeout\n");
- return -1;
- }
- s = inb(DATA_PORT) & 0xFF;
- *result = (unsigned char) s;
- return 0;
-}
-
-/*
- * Read the current Q-channel info. Also used for reading the
- * table of contents.
- */
-static int aztGetQChannelInfo(struct azt_Toc *qp)
-{
- unsigned char notUsed;
- int st;
-
-#ifdef AZT_DEBUG
- printk("aztcd: starting aztGetQChannelInfo Time:%li\n", jiffies);
-#endif
- if ((st = getAztStatus()) == -1)
- RETURNM("aztGetQChannelInfo 1", -1);
- if (aztSendCmd(ACMD_GET_Q_CHANNEL))
- RETURNM("aztGetQChannelInfo 2", -1);
- /*STEN_LOW_WAIT; ??? Dosemu0.60's cdrom.c does not like STEN_LOW_WAIT here */
- if (aztGetValue(&notUsed))
- RETURNM("aztGetQChannelInfo 3", -1); /*??? Nullbyte einlesen */
- if ((st & AST_MODE_BITS) == AST_INITIAL) {
- qp->ctrl_addr = 0; /* when audio stop ACMD_GET_Q_CHANNEL returns */
- qp->track = 0; /* only one byte with Aztech drives */
- qp->pointIndex = 0;
- qp->trackTime.min = 0;
- qp->trackTime.sec = 0;
- qp->trackTime.frame = 0;
- qp->diskTime.min = 0;
- qp->diskTime.sec = 0;
- qp->diskTime.frame = 0;
- return 0;
- } else {
- if (aztGetValue(&qp->ctrl_addr) < 0)
- RETURNM("aztGetQChannelInfo 4", -1);
- if (aztGetValue(&qp->track) < 0)
- RETURNM("aztGetQChannelInfo 4", -1);
- if (aztGetValue(&qp->pointIndex) < 0)
- RETURNM("aztGetQChannelInfo 4", -1);
- if (aztGetValue(&qp->trackTime.min) < 0)
- RETURNM("aztGetQChannelInfo 4", -1);
- if (aztGetValue(&qp->trackTime.sec) < 0)
- RETURNM("aztGetQChannelInfo 4", -1);
- if (aztGetValue(&qp->trackTime.frame) < 0)
- RETURNM("aztGetQChannelInfo 4", -1);
- if (aztGetValue(&notUsed) < 0)
- RETURNM("aztGetQChannelInfo 4", -1);
- if (aztGetValue(&qp->diskTime.min) < 0)
- RETURNM("aztGetQChannelInfo 4", -1);
- if (aztGetValue(&qp->diskTime.sec) < 0)
- RETURNM("aztGetQChannelInfo 4", -1);
- if (aztGetValue(&qp->diskTime.frame) < 0)
- RETURNM("aztGetQChannelInfo 4", -1);
- }
-#ifdef AZT_DEBUG
- printk("aztcd: exiting aztGetQChannelInfo Time:%li\n", jiffies);
-#endif
- return 0;
-}
-
-/*
- * Read the table of contents (TOC) and TOC header if necessary
- */
-static int aztUpdateToc(void)
-{
- int st;
-
-#ifdef AZT_DEBUG
- printk("aztcd: starting aztUpdateToc Time:%li\n", jiffies);
-#endif
- if (aztTocUpToDate)
- return 0;
-
- if (aztGetDiskInfo() < 0)
- return -EIO;
-
- if (aztGetToc(0) < 0)
- return -EIO;
-
- /*audio disk detection
- with my Aztech drive there is no audio status bit, so I use the copy
- protection bit of the first track. If this track is copy protected
- (copy bit = 0), I assume, it's an audio disk. Strange, but works ??? */
- if (!(Toc[DiskInfo.first].ctrl_addr & 0x40))
- DiskInfo.audio = 1;
- else
- DiskInfo.audio = 0;
-
- /* XA detection */
- if (!DiskInfo.audio) {
- azt_Play.start.min = 0; /*XA detection only seems to work */
- azt_Play.start.sec = 2; /*when we play a track */
- azt_Play.start.frame = 0;
- azt_Play.end.min = 0;
- azt_Play.end.sec = 0;
- azt_Play.end.frame = 1;
- if (sendAztCmd(ACMD_PLAY_READ, &azt_Play))
- return -1;
- DTEN_LOW;
- for (st = 0; st < CD_FRAMESIZE; st++)
- inb(DATA_PORT);
- }
- DiskInfo.xa = getAztStatus() & AST_MODE;
- if (DiskInfo.xa) {
- printk
- ("aztcd: XA support experimental - mail results to Werner.Zimmermann@fht-esslingen.de\n");
- }
-
- /*multisession detection
- support for multisession CDs is done automatically with Aztech drives,
- we don't have to take care about TOC redirection; if we want the isofs
- to take care about redirection, we have to set AZT_MULTISESSION to 1 */
- DiskInfo.multi = 0;
-#if AZT_MULTISESSION
- if (DiskInfo.xa) {
- aztGetMultiDiskInfo(); /*here Disk.Info.multi is set */
- }
-#endif
- if (DiskInfo.multi) {
- DiskInfo.lastSession.min = Toc[DiskInfo.next].diskTime.min;
- DiskInfo.lastSession.sec = Toc[DiskInfo.next].diskTime.sec;
- DiskInfo.lastSession.frame =
- Toc[DiskInfo.next].diskTime.frame;
- printk("aztcd: Multisession support experimental\n");
- } else {
- DiskInfo.lastSession.min =
- Toc[DiskInfo.first].diskTime.min;
- DiskInfo.lastSession.sec =
- Toc[DiskInfo.first].diskTime.sec;
- DiskInfo.lastSession.frame =
- Toc[DiskInfo.first].diskTime.frame;
- }
-
- aztTocUpToDate = 1;
-#ifdef AZT_DEBUG
- printk("aztcd: exiting aztUpdateToc Time:%li\n", jiffies);
-#endif
- return 0;
-}
-
-
-/* Read the table of contents header, i.e. no. of tracks and start of first
- * track
- */
-static int aztGetDiskInfo(void)
-{
- int limit;
- unsigned char test;
- struct azt_Toc qInfo;
-
-#ifdef AZT_DEBUG
- printk("aztcd: starting aztGetDiskInfo Time:%li\n", jiffies);
-#endif
- if (aztSendCmd(ACMD_SEEK_TO_LEADIN))
- RETURNM("aztGetDiskInfo 1", -1);
- STEN_LOW_WAIT;
- test = 0;
- for (limit = 300; limit > 0; limit--) {
- if (aztGetQChannelInfo(&qInfo) < 0)
- RETURNM("aztGetDiskInfo 2", -1);
- if (qInfo.pointIndex == 0xA0) { /*Number of FirstTrack */
- DiskInfo.first = qInfo.diskTime.min;
- DiskInfo.first = azt_bcd2bin(DiskInfo.first);
- test = test | 0x01;
- }
- if (qInfo.pointIndex == 0xA1) { /*Number of LastTrack */
- DiskInfo.last = qInfo.diskTime.min;
- DiskInfo.last = azt_bcd2bin(DiskInfo.last);
- test = test | 0x02;
- }
- if (qInfo.pointIndex == 0xA2) { /*DiskLength */
- DiskInfo.diskLength.min = qInfo.diskTime.min;
- DiskInfo.diskLength.sec = qInfo.diskTime.sec;
- DiskInfo.diskLength.frame = qInfo.diskTime.frame;
- test = test | 0x04;
- }
- if ((qInfo.pointIndex == DiskInfo.first) && (test & 0x01)) { /*StartTime of First Track */
- DiskInfo.firstTrack.min = qInfo.diskTime.min;
- DiskInfo.firstTrack.sec = qInfo.diskTime.sec;
- DiskInfo.firstTrack.frame = qInfo.diskTime.frame;
- test = test | 0x08;
- }
- if (test == 0x0F)
- break;
- }
-#ifdef AZT_DEBUG
- printk("aztcd: exiting aztGetDiskInfo Time:%li\n", jiffies);
- printk
- ("Disk Info: first %d last %d length %02X:%02X.%02X dez first %02X:%02X.%02X dez\n",
- DiskInfo.first, DiskInfo.last, DiskInfo.diskLength.min,
- DiskInfo.diskLength.sec, DiskInfo.diskLength.frame,
- DiskInfo.firstTrack.min, DiskInfo.firstTrack.sec,
- DiskInfo.firstTrack.frame);
-#endif
- if (test != 0x0F)
- return -1;
- return 0;
-}
-
-#if AZT_MULTISESSION
-/*
- * Get Multisession Disk Info
- */
-static int aztGetMultiDiskInfo(void)
-{
- int limit, k = 5;
- unsigned char test;
- struct azt_Toc qInfo;
-
-#ifdef AZT_DEBUG
- printk("aztcd: starting aztGetMultiDiskInfo\n");
-#endif
-
- do {
- azt_Play.start.min = Toc[DiskInfo.last + 1].diskTime.min;
- azt_Play.start.sec = Toc[DiskInfo.last + 1].diskTime.sec;
- azt_Play.start.frame =
- Toc[DiskInfo.last + 1].diskTime.frame;
- test = 0;
-
- for (limit = 30; limit > 0; limit--) { /*Seek for LeadIn of next session */
- if (aztSeek(&azt_Play))
- RETURNM("aztGetMultiDiskInfo 1", -1);
- if (aztGetQChannelInfo(&qInfo) < 0)
- RETURNM("aztGetMultiDiskInfo 2", -1);
- if ((qInfo.track == 0) && (qInfo.pointIndex))
- break; /*LeadIn found */
- if ((azt_Play.start.sec += 10) > 59) {
- azt_Play.start.sec = 0;
- azt_Play.start.min++;
- }
- }
- if (!limit)
- break; /*Check, if a leadin track was found, if not we're
- at the end of the disk */
-#ifdef AZT_DEBUG_MULTISESSION
- printk("leadin found track %d pointIndex %x limit %d\n",
- qInfo.track, qInfo.pointIndex, limit);
-#endif
- for (limit = 300; limit > 0; limit--) {
- if (++azt_Play.start.frame > 74) {
- azt_Play.start.frame = 0;
- if (azt_Play.start.sec > 59) {
- azt_Play.start.sec = 0;
- azt_Play.start.min++;
- }
- }
- if (aztSeek(&azt_Play))
- RETURNM("aztGetMultiDiskInfo 3", -1);
- if (aztGetQChannelInfo(&qInfo) < 0)
- RETURNM("aztGetMultiDiskInfo 4", -1);
- if (qInfo.pointIndex == 0xA0) { /*Number of NextTrack */
- DiskInfo.next = qInfo.diskTime.min;
- DiskInfo.next = azt_bcd2bin(DiskInfo.next);
- test = test | 0x01;
- }
- if (qInfo.pointIndex == 0xA1) { /*Number of LastTrack */
- DiskInfo.last = qInfo.diskTime.min;
- DiskInfo.last = azt_bcd2bin(DiskInfo.last);
- test = test | 0x02;
- }
- if (qInfo.pointIndex == 0xA2) { /*DiskLength */
- DiskInfo.diskLength.min =
- qInfo.diskTime.min;
- DiskInfo.diskLength.sec =
- qInfo.diskTime.sec;
- DiskInfo.diskLength.frame =
- qInfo.diskTime.frame;
- test = test | 0x04;
- }
- if ((qInfo.pointIndex == DiskInfo.next) && (test & 0x01)) { /*StartTime of Next Track */
- DiskInfo.nextSession.min =
- qInfo.diskTime.min;
- DiskInfo.nextSession.sec =
- qInfo.diskTime.sec;
- DiskInfo.nextSession.frame =
- qInfo.diskTime.frame;
- test = test | 0x08;
- }
- if (test == 0x0F)
- break;
- }
-#ifdef AZT_DEBUG_MULTISESSION
- printk
- ("MultiDisk Info: first %d next %d last %d length %02x:%02x.%02x dez first %02x:%02x.%02x dez next %02x:%02x.%02x dez\n",
- DiskInfo.first, DiskInfo.next, DiskInfo.last,
- DiskInfo.diskLength.min, DiskInfo.diskLength.sec,
- DiskInfo.diskLength.frame, DiskInfo.firstTrack.min,
- DiskInfo.firstTrack.sec, DiskInfo.firstTrack.frame,
- DiskInfo.nextSession.min, DiskInfo.nextSession.sec,
- DiskInfo.nextSession.frame);
-#endif
- if (test != 0x0F)
- break;
- else
- DiskInfo.multi = 1; /*found TOC of more than one session */
- aztGetToc(1);
- } while (--k);
-
-#ifdef AZT_DEBUG
- printk("aztcd: exiting aztGetMultiDiskInfo Time:%li\n", jiffies);
-#endif
- return 0;
-}
-#endif
-
-/*
- * Read the table of contents (TOC)
- */
-static int aztGetToc(int multi)
-{
- int i, px;
- int limit;
- struct azt_Toc qInfo;
-
-#ifdef AZT_DEBUG
- printk("aztcd: starting aztGetToc Time:%li\n", jiffies);
-#endif
- if (!multi) {
- for (i = 0; i < MAX_TRACKS; i++)
- Toc[i].pointIndex = 0;
- i = DiskInfo.last + 3;
- } else {
- for (i = DiskInfo.next; i < MAX_TRACKS; i++)
- Toc[i].pointIndex = 0;
- i = DiskInfo.last + 4 - DiskInfo.next;
- }
-
-/*Is there a good reason to stop motor before TOC read?
- if (aztSendCmd(ACMD_STOP)) RETURNM("aztGetToc 1",-1);
- STEN_LOW_WAIT;
-*/
-
- if (!multi) {
- azt_mode = 0x05;
- if (aztSendCmd(ACMD_SEEK_TO_LEADIN))
- RETURNM("aztGetToc 2", -1);
- STEN_LOW_WAIT;
- }
- for (limit = 300; limit > 0; limit--) {
- if (multi) {
- if (++azt_Play.start.sec > 59) {
- azt_Play.start.sec = 0;
- azt_Play.start.min++;
- }
- if (aztSeek(&azt_Play))
- RETURNM("aztGetToc 3", -1);
- }
- if (aztGetQChannelInfo(&qInfo) < 0)
- break;
-
- px = azt_bcd2bin(qInfo.pointIndex);
-
- if (px > 0 && px < MAX_TRACKS && qInfo.track == 0)
- if (Toc[px].pointIndex == 0) {
- Toc[px] = qInfo;
- i--;
- }
-
- if (i <= 0)
- break;
- }
-
- Toc[DiskInfo.last + 1].diskTime = DiskInfo.diskLength;
- Toc[DiskInfo.last].trackTime = DiskInfo.diskLength;
-
-#ifdef AZT_DEBUG_MULTISESSION
- printk("aztcd: exiting aztGetToc\n");
- for (i = 1; i <= DiskInfo.last + 1; i++)
- printk
- ("i = %2d ctl-adr = %02X track %2d px %02X %02X:%02X.%02X dez %02X:%02X.%02X dez\n",
- i, Toc[i].ctrl_addr, Toc[i].track, Toc[i].pointIndex,
- Toc[i].trackTime.min, Toc[i].trackTime.sec,
- Toc[i].trackTime.frame, Toc[i].diskTime.min,
- Toc[i].diskTime.sec, Toc[i].diskTime.frame);
- for (i = 100; i < 103; i++)
- printk
- ("i = %2d ctl-adr = %02X track %2d px %02X %02X:%02X.%02X dez %02X:%02X.%02X dez\n",
- i, Toc[i].ctrl_addr, Toc[i].track, Toc[i].pointIndex,
- Toc[i].trackTime.min, Toc[i].trackTime.sec,
- Toc[i].trackTime.frame, Toc[i].diskTime.min,
- Toc[i].diskTime.sec, Toc[i].diskTime.frame);
-#endif
-
- return limit > 0 ? 0 : -1;
-}
-
-
-/*##########################################################################
- Kernel Interface Functions
- ##########################################################################
-*/
-
-#ifndef MODULE
-static int __init aztcd_setup(char *str)
-{
- int ints[4];
-
- (void) get_options(str, ARRAY_SIZE(ints), ints);
-
- if (ints[0] > 0)
- azt_port = ints[1];
- if (ints[1] > 1)
- azt_cont = ints[2];
- return 1;
-}
-
-__setup("aztcd=", aztcd_setup);
-
-#endif /* !MODULE */
-
-/*
- * Checking if the media has been changed
-*/
-static int check_aztcd_media_change(struct gendisk *disk)
-{
- if (aztDiskChanged) { /* disk changed */
- aztDiskChanged = 0;
- return 1;
- } else
- return 0; /* no change */
-}
-
-/*
- * Kernel IO-controls
-*/
-static int aztcd_ioctl(struct inode *ip, struct file *fp, unsigned int cmd,
- unsigned long arg)
-{
- int i;
- struct azt_Toc qInfo;
- struct cdrom_ti ti;
- struct cdrom_tochdr tocHdr;
- struct cdrom_msf msf;
- struct cdrom_tocentry entry;
- struct azt_Toc *tocPtr;
- struct cdrom_subchnl subchnl;
- struct cdrom_volctrl volctrl;
- void __user *argp = (void __user *)arg;
-
-#ifdef AZT_DEBUG
- printk("aztcd: starting aztcd_ioctl - Command:%x Time: %li\n",
- cmd, jiffies);
- printk("aztcd Status %x\n", getAztStatus());
-#endif
- if (!ip)
- RETURNM("aztcd_ioctl 1", -EINVAL);
- if (getAztStatus() < 0)
- RETURNM("aztcd_ioctl 2", -EIO);
- if ((!aztTocUpToDate) || (aztDiskChanged)) {
- if ((i = aztUpdateToc()) < 0)
- RETURNM("aztcd_ioctl 3", i); /* error reading TOC */
- }
-
- switch (cmd) {
- case CDROMSTART: /* Spin up the drive. Don't know, what to do,
- at least close the tray */
-#if AZT_PRIVATE_IOCTLS
- if (aztSendCmd(ACMD_CLOSE))
- RETURNM("aztcd_ioctl 4", -1);
- STEN_LOW_WAIT;
-#endif
- break;
- case CDROMSTOP: /* Spin down the drive */
- if (aztSendCmd(ACMD_STOP))
- RETURNM("aztcd_ioctl 5", -1);
- STEN_LOW_WAIT;
- /* should we do anything if it fails? */
- aztAudioStatus = CDROM_AUDIO_NO_STATUS;
- break;
- case CDROMPAUSE: /* Pause the drive */
- if (aztAudioStatus != CDROM_AUDIO_PLAY)
- return -EINVAL;
-
- if (aztGetQChannelInfo(&qInfo) < 0) { /* didn't get q channel info */
- aztAudioStatus = CDROM_AUDIO_NO_STATUS;
- RETURNM("aztcd_ioctl 7", 0);
- }
- azt_Play.start = qInfo.diskTime; /* remember restart point */
-
- if (aztSendCmd(ACMD_PAUSE))
- RETURNM("aztcd_ioctl 8", -1);
- STEN_LOW_WAIT;
- aztAudioStatus = CDROM_AUDIO_PAUSED;
- break;
- case CDROMRESUME: /* Play it again, Sam */
- if (aztAudioStatus != CDROM_AUDIO_PAUSED)
- return -EINVAL;
- /* restart the drive at the saved position. */
- i = aztPlay(&azt_Play);
- if (i < 0) {
- aztAudioStatus = CDROM_AUDIO_ERROR;
- return -EIO;
- }
- aztAudioStatus = CDROM_AUDIO_PLAY;
- break;
- case CDROMMULTISESSION: /*multisession support -- experimental */
- {
- struct cdrom_multisession ms;
-#ifdef AZT_DEBUG
- printk("aztcd ioctl MULTISESSION\n");
-#endif
- if (copy_from_user(&ms, argp,
- sizeof(struct cdrom_multisession)))
- return -EFAULT;
- if (ms.addr_format == CDROM_MSF) {
- ms.addr.msf.minute =
- azt_bcd2bin(DiskInfo.lastSession.min);
- ms.addr.msf.second =
- azt_bcd2bin(DiskInfo.lastSession.sec);
- ms.addr.msf.frame =
- azt_bcd2bin(DiskInfo.lastSession.
- frame);
- } else if (ms.addr_format == CDROM_LBA)
- ms.addr.lba =
- azt_msf2hsg(&DiskInfo.lastSession);
- else
- return -EINVAL;
- ms.xa_flag = DiskInfo.xa;
- if (copy_to_user(argp, &ms,
- sizeof(struct cdrom_multisession)))
- return -EFAULT;
-#ifdef AZT_DEBUG
- if (ms.addr_format == CDROM_MSF)
- printk
- ("aztcd multisession xa:%d, msf:%02x:%02x.%02x [%02x:%02x.%02x])\n",
- ms.xa_flag, ms.addr.msf.minute,
- ms.addr.msf.second, ms.addr.msf.frame,
- DiskInfo.lastSession.min,
- DiskInfo.lastSession.sec,
- DiskInfo.lastSession.frame);
- else
- printk
- ("aztcd multisession %d, lba:0x%08x [%02x:%02x.%02x])\n",
- ms.xa_flag, ms.addr.lba,
- DiskInfo.lastSession.min,
- DiskInfo.lastSession.sec,
- DiskInfo.lastSession.frame);
-#endif
- return 0;
- }
- case CDROMPLAYTRKIND: /* Play a track. This currently ignores index. */
- if (copy_from_user(&ti, argp, sizeof ti))
- return -EFAULT;
- if (ti.cdti_trk0 < DiskInfo.first
- || ti.cdti_trk0 > DiskInfo.last
- || ti.cdti_trk1 < ti.cdti_trk0) {
- return -EINVAL;
- }
- if (ti.cdti_trk1 > DiskInfo.last)
- ti.cdti_trk1 = DiskInfo.last;
- azt_Play.start = Toc[ti.cdti_trk0].diskTime;
- azt_Play.end = Toc[ti.cdti_trk1 + 1].diskTime;
-#ifdef AZT_DEBUG
- printk("aztcd play: %02x:%02x.%02x to %02x:%02x.%02x\n",
- azt_Play.start.min, azt_Play.start.sec,
- azt_Play.start.frame, azt_Play.end.min,
- azt_Play.end.sec, azt_Play.end.frame);
-#endif
- i = aztPlay(&azt_Play);
- if (i < 0) {
- aztAudioStatus = CDROM_AUDIO_ERROR;
- return -EIO;
- }
- aztAudioStatus = CDROM_AUDIO_PLAY;
- break;
- case CDROMPLAYMSF: /* Play starting at the given MSF address. */
-/* if (aztAudioStatus == CDROM_AUDIO_PLAY)
- { if (aztSendCmd(ACMD_STOP)) RETURNM("aztcd_ioctl 9",-1);
- STEN_LOW;
- aztAudioStatus = CDROM_AUDIO_NO_STATUS;
- }
-*/
- if (copy_from_user(&msf, argp, sizeof msf))
- return -EFAULT;
- /* convert to bcd */
- azt_bin2bcd(&msf.cdmsf_min0);
- azt_bin2bcd(&msf.cdmsf_sec0);
- azt_bin2bcd(&msf.cdmsf_frame0);
- azt_bin2bcd(&msf.cdmsf_min1);
- azt_bin2bcd(&msf.cdmsf_sec1);
- azt_bin2bcd(&msf.cdmsf_frame1);
- azt_Play.start.min = msf.cdmsf_min0;
- azt_Play.start.sec = msf.cdmsf_sec0;
- azt_Play.start.frame = msf.cdmsf_frame0;
- azt_Play.end.min = msf.cdmsf_min1;
- azt_Play.end.sec = msf.cdmsf_sec1;
- azt_Play.end.frame = msf.cdmsf_frame1;
-#ifdef AZT_DEBUG
- printk("aztcd play: %02x:%02x.%02x to %02x:%02x.%02x\n",
- azt_Play.start.min, azt_Play.start.sec,
- azt_Play.start.frame, azt_Play.end.min,
- azt_Play.end.sec, azt_Play.end.frame);
-#endif
- i = aztPlay(&azt_Play);
- if (i < 0) {
- aztAudioStatus = CDROM_AUDIO_ERROR;
- return -EIO;
- }
- aztAudioStatus = CDROM_AUDIO_PLAY;
- break;
-
- case CDROMREADTOCHDR: /* Read the table of contents header */
- tocHdr.cdth_trk0 = DiskInfo.first;
- tocHdr.cdth_trk1 = DiskInfo.last;
- if (copy_to_user(argp, &tocHdr, sizeof tocHdr))
- return -EFAULT;
- break;
- case CDROMREADTOCENTRY: /* Read an entry in the table of contents */
- if (copy_from_user(&entry, argp, sizeof entry))
- return -EFAULT;
- if ((!aztTocUpToDate) || aztDiskChanged)
- aztUpdateToc();
- if (entry.cdte_track == CDROM_LEADOUT)
- tocPtr = &Toc[DiskInfo.last + 1];
- else if (entry.cdte_track > DiskInfo.last
- || entry.cdte_track < DiskInfo.first) {
- return -EINVAL;
- } else
- tocPtr = &Toc[entry.cdte_track];
- entry.cdte_adr = tocPtr->ctrl_addr;
- entry.cdte_ctrl = tocPtr->ctrl_addr >> 4;
- if (entry.cdte_format == CDROM_LBA)
- entry.cdte_addr.lba =
- azt_msf2hsg(&tocPtr->diskTime);
- else if (entry.cdte_format == CDROM_MSF) {
- entry.cdte_addr.msf.minute =
- azt_bcd2bin(tocPtr->diskTime.min);
- entry.cdte_addr.msf.second =
- azt_bcd2bin(tocPtr->diskTime.sec);
- entry.cdte_addr.msf.frame =
- azt_bcd2bin(tocPtr->diskTime.frame);
- } else {
- return -EINVAL;
- }
- if (copy_to_user(argp, &entry, sizeof entry))
- return -EFAULT;
- break;
- case CDROMSUBCHNL: /* Get subchannel info */
- if (copy_from_user
- (&subchnl, argp, sizeof(struct cdrom_subchnl)))
- return -EFAULT;
- if (aztGetQChannelInfo(&qInfo) < 0) {
-#ifdef AZT_DEBUG
- printk
- ("aztcd: exiting aztcd_ioctl - Error 3 - Command:%x\n",
- cmd);
-#endif
- return -EIO;
- }
- subchnl.cdsc_audiostatus = aztAudioStatus;
- subchnl.cdsc_adr = qInfo.ctrl_addr;
- subchnl.cdsc_ctrl = qInfo.ctrl_addr >> 4;
- subchnl.cdsc_trk = azt_bcd2bin(qInfo.track);
- subchnl.cdsc_ind = azt_bcd2bin(qInfo.pointIndex);
- if (subchnl.cdsc_format == CDROM_LBA) {
- subchnl.cdsc_absaddr.lba =
- azt_msf2hsg(&qInfo.diskTime);
- subchnl.cdsc_reladdr.lba =
- azt_msf2hsg(&qInfo.trackTime);
- } else { /*default */
- subchnl.cdsc_format = CDROM_MSF;
- subchnl.cdsc_absaddr.msf.minute =
- azt_bcd2bin(qInfo.diskTime.min);
- subchnl.cdsc_absaddr.msf.second =
- azt_bcd2bin(qInfo.diskTime.sec);
- subchnl.cdsc_absaddr.msf.frame =
- azt_bcd2bin(qInfo.diskTime.frame);
- subchnl.cdsc_reladdr.msf.minute =
- azt_bcd2bin(qInfo.trackTime.min);
- subchnl.cdsc_reladdr.msf.second =
- azt_bcd2bin(qInfo.trackTime.sec);
- subchnl.cdsc_reladdr.msf.frame =
- azt_bcd2bin(qInfo.trackTime.frame);
- }
- if (copy_to_user(argp, &subchnl, sizeof(struct cdrom_subchnl)))
- return -EFAULT;
- break;
- case CDROMVOLCTRL: /* Volume control
- * With my Aztech CD268-01A volume control does not work, I can only
- turn the channels on (any value !=0) or off (value==0). Maybe it
- works better with your drive */
- if (copy_from_user(&volctrl, argp, sizeof(volctrl)))
- return -EFAULT;
- azt_Play.start.min = 0x21;
- azt_Play.start.sec = 0x84;
- azt_Play.start.frame = volctrl.channel0;
- azt_Play.end.min = volctrl.channel1;
- azt_Play.end.sec = volctrl.channel2;
- azt_Play.end.frame = volctrl.channel3;
- sendAztCmd(ACMD_SET_VOLUME, &azt_Play);
- STEN_LOW_WAIT;
- break;
- case CDROMEJECT:
- aztUnlockDoor(); /* Assume user knows what they're doing */
- /* all drives can at least stop! */
- if (aztAudioStatus == CDROM_AUDIO_PLAY) {
- if (aztSendCmd(ACMD_STOP))
- RETURNM("azt_ioctl 10", -1);
- STEN_LOW_WAIT;
- }
- if (aztSendCmd(ACMD_EJECT))
- RETURNM("azt_ioctl 11", -1);
- STEN_LOW_WAIT;
- aztAudioStatus = CDROM_AUDIO_NO_STATUS;
- break;
- case CDROMEJECT_SW:
- azt_auto_eject = (char) arg;
- break;
- case CDROMRESET:
- outb(ACMD_SOFT_RESET, CMD_PORT); /*send reset */
- STEN_LOW;
- if (inb(DATA_PORT) != AFL_OP_OK) { /*OP_OK? */
- printk
- ("aztcd: AZTECH CD-ROM drive does not respond\n");
- }
- break;
-/*Take care, the following code is not compatible with other CD-ROM drivers,
- use it at your own risk with cdplay.c. Set AZT_PRIVATE_IOCTLS to 0 in aztcd.h,
- if you do not want to use it!
-*/
-#if AZT_PRIVATE_IOCTLS
- case CDROMREADCOOKED: /*read data in mode 1 (2048 Bytes) */
- case CDROMREADRAW: /*read data in mode 2 (2336 Bytes) */
- {
- if (copy_from_user(&msf, argp, sizeof msf))
- return -EFAULT;
- /* convert to bcd */
- azt_bin2bcd(&msf.cdmsf_min0);
- azt_bin2bcd(&msf.cdmsf_sec0);
- azt_bin2bcd(&msf.cdmsf_frame0);
- msf.cdmsf_min1 = 0;
- msf.cdmsf_sec1 = 0;
- msf.cdmsf_frame1 = 1; /*read only one frame */
- azt_Play.start.min = msf.cdmsf_min0;
- azt_Play.start.sec = msf.cdmsf_sec0;
- azt_Play.start.frame = msf.cdmsf_frame0;
- azt_Play.end.min = msf.cdmsf_min1;
- azt_Play.end.sec = msf.cdmsf_sec1;
- azt_Play.end.frame = msf.cdmsf_frame1;
- if (cmd == CDROMREADRAW) {
- if (DiskInfo.xa) {
- return -1; /*XA Disks can't be read raw */
- } else {
- if (sendAztCmd(ACMD_PLAY_READ_RAW, &azt_Play))
- return -1;
- DTEN_LOW;
- insb(DATA_PORT, buf, CD_FRAMESIZE_RAW);
- if (copy_to_user(argp, &buf, CD_FRAMESIZE_RAW))
- return -EFAULT;
- }
- } else
- /*CDROMREADCOOKED*/ {
- if (sendAztCmd(ACMD_PLAY_READ, &azt_Play))
- return -1;
- DTEN_LOW;
- insb(DATA_PORT, buf, CD_FRAMESIZE);
- if (copy_to_user(argp, &buf, CD_FRAMESIZE))
- return -EFAULT;
- }
- }
- break;
- case CDROMSEEK: /*seek msf address */
- if (copy_from_user(&msf, argp, sizeof msf))
- return -EFAULT;
- /* convert to bcd */
- azt_bin2bcd(&msf.cdmsf_min0);
- azt_bin2bcd(&msf.cdmsf_sec0);
- azt_bin2bcd(&msf.cdmsf_frame0);
- azt_Play.start.min = msf.cdmsf_min0;
- azt_Play.start.sec = msf.cdmsf_sec0;
- azt_Play.start.frame = msf.cdmsf_frame0;
- if (aztSeek(&azt_Play))
- return -1;
- break;
-#endif /*end of incompatible code */
- case CDROMREADMODE1: /*set read data in mode 1 */
- return aztSetDiskType(AZT_MODE_1);
- case CDROMREADMODE2: /*set read data in mode 2 */
- return aztSetDiskType(AZT_MODE_2);
- default:
- return -EINVAL;
- }
-#ifdef AZT_DEBUG
- printk("aztcd: exiting aztcd_ioctl Command:%x Time:%li\n", cmd,
- jiffies);
-#endif
- return 0;
-}
-
-/*
- * Take care of the different block sizes between cdrom and Linux.
- * When Linux gets variable block sizes this will probably go away.
- */
-static void azt_transfer(void)
-{
-#ifdef AZT_TEST
- printk("aztcd: executing azt_transfer Time:%li\n", jiffies);
-#endif
- if (!current_valid())
- return;
-
- while (CURRENT->nr_sectors) {
- int bn = CURRENT->sector / 4;
- int i;
- for (i = 0; i < AZT_BUF_SIZ && azt_buf_bn[i] != bn; ++i);
- if (i < AZT_BUF_SIZ) {
- int offs = (i * 4 + (CURRENT->sector & 3)) * 512;
- int nr_sectors = 4 - (CURRENT->sector & 3);
- if (azt_buf_out != i) {
- azt_buf_out = i;
- if (azt_buf_bn[i] != bn) {
- azt_buf_out = -1;
- continue;
- }
- }
- if (nr_sectors > CURRENT->nr_sectors)
- nr_sectors = CURRENT->nr_sectors;
- memcpy(CURRENT->buffer, azt_buf + offs,
- nr_sectors * 512);
- CURRENT->nr_sectors -= nr_sectors;
- CURRENT->sector += nr_sectors;
- CURRENT->buffer += nr_sectors * 512;
- } else {
- azt_buf_out = -1;
- break;
- }
- }
-}
-
-static void do_aztcd_request(request_queue_t * q)
-{
-#ifdef AZT_TEST
- printk(" do_aztcd_request(%ld+%ld) Time:%li\n", CURRENT->sector,
- CURRENT->nr_sectors, jiffies);
-#endif
- if (DiskInfo.audio) {
- printk("aztcd: Error, tried to mount an Audio CD\n");
- end_request(CURRENT, 0);
- return;
- }
- azt_transfer_is_active = 1;
- while (current_valid()) {
- azt_transfer();
- if (CURRENT->nr_sectors == 0) {
- end_request(CURRENT, 1);
- } else {
- azt_buf_out = -1; /* Want to read a block not in buffer */
- if (azt_state == AZT_S_IDLE) {
- if ((!aztTocUpToDate) || aztDiskChanged) {
- if (aztUpdateToc() < 0) {
- while (current_valid())
- end_request(CURRENT, 0);
- break;
- }
- }
- azt_state = AZT_S_START;
- AztTries = 5;
- SET_TIMER(azt_poll, HZ / 100);
- }
- break;
- }
- }
- azt_transfer_is_active = 0;
-#ifdef AZT_TEST2
- printk
- ("azt_next_bn:%x azt_buf_in:%x azt_buf_out:%x azt_buf_bn:%x\n",
- azt_next_bn, azt_buf_in, azt_buf_out, azt_buf_bn[azt_buf_in]);
- printk(" do_aztcd_request ends Time:%li\n", jiffies);
-#endif
-}
-
-
-static void azt_invalidate_buffers(void)
-{
- int i;
-
-#ifdef AZT_DEBUG
- printk("aztcd: executing azt_invalidate_buffers\n");
-#endif
- for (i = 0; i < AZT_BUF_SIZ; ++i)
- azt_buf_bn[i] = -1;
- azt_buf_out = -1;
-}
-
-/*
- * Open the device special file. Check that a disk is in.
- */
-static int aztcd_open(struct inode *ip, struct file *fp)
-{
- int st;
-
-#ifdef AZT_DEBUG
- printk("aztcd: starting aztcd_open\n");
-#endif
-
- if (aztPresent == 0)
- return -ENXIO; /* no hardware */
-
- if (!azt_open_count && azt_state == AZT_S_IDLE) {
- azt_invalidate_buffers();
-
- st = getAztStatus(); /* check drive status */
- if (st == -1)
- goto err_out; /* drive doesn't respond */
-
- if (st & AST_DOOR_OPEN) { /* close door, then get the status again. */
- printk("aztcd: Door Open?\n");
- aztCloseDoor();
- st = getAztStatus();
- }
-
- if ((st & AST_NOT_READY) || (st & AST_DSK_CHG)) { /*no disk in drive or changed */
- printk
- ("aztcd: Disk Changed or No Disk in Drive?\n");
- aztTocUpToDate = 0;
- }
- if (aztUpdateToc())
- goto err_out;
-
- }
- ++azt_open_count;
- aztLockDoor();
-
-#ifdef AZT_DEBUG
- printk("aztcd: exiting aztcd_open\n");
-#endif
- return 0;
-
- err_out:
- return -EIO;
-}
-
-
-/*
- * On close, we flush all azt blocks from the buffer cache.
- */
-static int aztcd_release(struct inode *inode, struct file *file)
-{
-#ifdef AZT_DEBUG
- printk("aztcd: executing aztcd_release\n");
- printk("inode: %p, device: %s file: %p\n", inode,
- inode->i_bdev->bd_disk->disk_name, file);
-#endif
- if (!--azt_open_count) {
- azt_invalidate_buffers();
- aztUnlockDoor();
- if (azt_auto_eject)
- aztSendCmd(ACMD_EJECT);
- CLEAR_TIMER;
- }
- return 0;
-}
-
-static struct gendisk *azt_disk;
-
-/*
- * Test for presence of drive and initialize it. Called at boot time.
- */
-
-static int __init aztcd_init(void)
-{
- long int count, max_count;
- unsigned char result[50];
- int st;
- void* status = NULL;
- int i = 0;
- int ret = 0;
-
- if (azt_port == 0) {
- printk(KERN_INFO "aztcd: no Aztech CD-ROM Initialization");
- return -EIO;
- }
-
- printk(KERN_INFO "aztcd: AZTECH, ORCHID, OKANO, WEARNES, TXC, CyDROM "
- "CD-ROM Driver\n");
- printk(KERN_INFO "aztcd: (C) 1994-98 W.Zimmermann\n");
- if (azt_port == -1) {
- printk
- ("aztcd: DriverVersion=%s For IDE/ATAPI-drives use ide-cd.c\n",
- AZT_VERSION);
- } else
- printk
- ("aztcd: DriverVersion=%s BaseAddress=0x%x For IDE/ATAPI-drives use ide-cd.c\n",
- AZT_VERSION, azt_port);
- printk(KERN_INFO "aztcd: If you have problems, read /usr/src/linux/"
- "Documentation/cdrom/aztcd\n");
-
-
-#ifdef AZT_SW32 /*CDROM connected to Soundwave32 card */
- if ((0xFF00 & inw(AZT_SW32_ID_REG)) != 0x4500) {
- printk
- ("aztcd: no Soundwave32 card detected at base:%x init:%x config:%x id:%x\n",
- AZT_SW32_BASE_ADDR, AZT_SW32_INIT,
- AZT_SW32_CONFIG_REG, AZT_SW32_ID_REG);
- return -EIO;
- } else {
- printk(KERN_INFO
- "aztcd: Soundwave32 card detected at %x Version %x\n",
- AZT_SW32_BASE_ADDR, inw(AZT_SW32_ID_REG));
- outw(AZT_SW32_INIT, AZT_SW32_CONFIG_REG);
- for (count = 0; count < 10000; count++); /*delay a bit */
- }
-#endif
-
- /* check for presence of drive */
-
- if (azt_port == -1) { /* autoprobing for proprietary interface */
- for (i = 0; (azt_port_auto[i] != 0) && (i < 16); i++) {
- azt_port = azt_port_auto[i];
- printk(KERN_INFO "aztcd: Autoprobing BaseAddress=0x%x"
- "\n", azt_port);
- /*proprietary interfaces need 4 bytes */
- if (!request_region(azt_port, 4, "aztcd")) {
- continue;
- }
- outb(POLLED, MODE_PORT);
- inb(CMD_PORT);
- inb(CMD_PORT);
- outb(ACMD_GET_VERSION, CMD_PORT); /*Try to get version info */
-
- aztTimeOutCount = 0;
- do {
- aztIndatum = inb(STATUS_PORT);
- aztTimeOutCount++;
- if (aztTimeOutCount >= AZT_FAST_TIMEOUT)
- break;
- } while (aztIndatum & AFL_STATUS);
- if (inb(DATA_PORT) == AFL_OP_OK) { /* OK drive found */
- break;
- }
- else { /* Drive not found on this port - try next one */
- release_region(azt_port, 4);
- }
- }
- if ((i == 16) || (azt_port_auto[i] == 0)) {
- printk(KERN_INFO "aztcd: no AZTECH CD-ROM drive found\n");
- return -EIO;
- }
- } else { /* no autoprobing */
- if ((azt_port == 0x1f0) || (azt_port == 0x170))
- status = request_region(azt_port, 8, "aztcd"); /*IDE-interfaces need 8 bytes */
- else
- status = request_region(azt_port, 4, "aztcd"); /*proprietary interfaces need 4 bytes */
- if (!status) {
- printk(KERN_WARNING "aztcd: conflict, I/O port (%X) "
- "already used\n", azt_port);
- return -EIO;
- }
-
- if ((azt_port == 0x1f0) || (azt_port == 0x170))
- SWITCH_IDE_SLAVE; /*switch IDE interface to slave configuration */
-
- outb(POLLED, MODE_PORT);
- inb(CMD_PORT);
- inb(CMD_PORT);
- outb(ACMD_GET_VERSION, CMD_PORT); /*Try to get version info */
-
- aztTimeOutCount = 0;
- do {
- aztIndatum = inb(STATUS_PORT);
- aztTimeOutCount++;
- if (aztTimeOutCount >= AZT_FAST_TIMEOUT)
- break;
- } while (aztIndatum & AFL_STATUS);
-
- if (inb(DATA_PORT) != AFL_OP_OK) { /*OP_OK? If not, reset and try again */
-#ifndef MODULE
- if (azt_cont != 0x79) {
- printk(KERN_WARNING "aztcd: no AZTECH CD-ROM "
- "drive found-Try boot parameter aztcd="
- "<BaseAddress>,0x79\n");
- ret = -EIO;
- goto err_out;
- }
-#else
- if (0) {
- }
-#endif
- else {
- printk(KERN_INFO "aztcd: drive reset - "
- "please wait\n");
- for (count = 0; count < 50; count++) {
- inb(STATUS_PORT); /*removing all data from earlier tries */
- inb(DATA_PORT);
- }
- outb(POLLED, MODE_PORT);
- inb(CMD_PORT);
- inb(CMD_PORT);
- getAztStatus(); /*trap errors */
- outb(ACMD_SOFT_RESET, CMD_PORT); /*send reset */
- STEN_LOW;
- if (inb(DATA_PORT) != AFL_OP_OK) { /*OP_OK? */
- printk(KERN_WARNING "aztcd: no AZTECH "
- "CD-ROM drive found\n");
- ret = -EIO;
- goto err_out;
- }
-
- for (count = 0; count < AZT_TIMEOUT;
- count++)
- barrier(); /* Stop gcc 2.96 being smart */
- /* use udelay(), damnit -- AV */
-
- if ((st = getAztStatus()) == -1) {
- printk(KERN_WARNING "aztcd: Drive Status"
- " Error Status=%x\n", st);
- ret = -EIO;
- goto err_out;
- }
-#ifdef AZT_DEBUG
- printk(KERN_DEBUG "aztcd: Status = %x\n", st);
-#endif
- outb(POLLED, MODE_PORT);
- inb(CMD_PORT);
- inb(CMD_PORT);
- outb(ACMD_GET_VERSION, CMD_PORT); /*GetVersion */
- STEN_LOW;
- OP_OK;
- }
- }
- }
-
- azt_init_end = 1;
- STEN_LOW;
- result[0] = inb(DATA_PORT); /*reading in a null byte??? */
- for (count = 1; count < 50; count++) { /*Reading version string */
- aztTimeOutCount = 0; /*here we must implement STEN_LOW differently */
- do {
- aztIndatum = inb(STATUS_PORT); /*because we want to exit by timeout */
- aztTimeOutCount++;
- if (aztTimeOutCount >= AZT_FAST_TIMEOUT)
- break;
- } while (aztIndatum & AFL_STATUS);
- if (aztTimeOutCount >= AZT_FAST_TIMEOUT)
- break; /*all chars read? */
- result[count] = inb(DATA_PORT);
- }
- if (count > 30)
- max_count = 30; /*print max.30 chars of the version string */
- else
- max_count = count;
- printk(KERN_INFO "aztcd: FirmwareVersion=");
- for (count = 1; count < max_count; count++)
- printk("%c", result[count]);
- printk("<<>> ");
-
- if ((result[1] == 'A') && (result[2] == 'Z') && (result[3] == 'T')) {
- printk("AZTECH drive detected\n");
- /*AZTECH*/}
- else if ((result[2] == 'C') && (result[3] == 'D')
- && (result[4] == 'D')) {
- printk("ORCHID or WEARNES drive detected\n"); /*ORCHID or WEARNES */
- } else if ((result[1] == 0x03) && (result[2] == '5')) {
- printk("TXC or CyCDROM drive detected\n"); /*Conrad TXC, CyCDROM */
- } else { /*OTHERS or none */
- printk("\nunknown drive or firmware version detected\n");
- printk
- ("aztcd may not run stable, if you want to try anyhow,\n");
- printk("boot with: aztcd=<BaseAddress>,0x79\n");
- if ((azt_cont != 0x79)) {
- printk("aztcd: FirmwareVersion=");
- for (count = 1; count < 5; count++)
- printk("%c", result[count]);
- printk("<<>> ");
- printk("Aborted\n");
- ret = -EIO;
- goto err_out;
- }
- }
- azt_disk = alloc_disk(1);
- if (!azt_disk)
- goto err_out;
-
- if (register_blkdev(MAJOR_NR, "aztcd")) {
- ret = -EIO;
- goto err_out2;
- }
-
- azt_queue = blk_init_queue(do_aztcd_request, &aztSpin);
- if (!azt_queue) {
- ret = -ENOMEM;
- goto err_out3;
- }
-
- blk_queue_hardsect_size(azt_queue, 2048);
- azt_disk->major = MAJOR_NR;
- azt_disk->first_minor = 0;
- azt_disk->fops = &azt_fops;
- sprintf(azt_disk->disk_name, "aztcd");
- azt_disk->queue = azt_queue;
- add_disk(azt_disk);
- azt_invalidate_buffers();
- aztPresent = 1;
- aztCloseDoor();
- return 0;
-err_out3:
- unregister_blkdev(MAJOR_NR, "aztcd");
-err_out2:
- put_disk(azt_disk);
-err_out:
- if ((azt_port == 0x1f0) || (azt_port == 0x170)) {
- SWITCH_IDE_MASTER;
- release_region(azt_port, 8); /*IDE-interface */
- } else
- release_region(azt_port, 4); /*proprietary interface */
- return ret;
-
-}
-
-static void __exit aztcd_exit(void)
-{
- del_gendisk(azt_disk);
- put_disk(azt_disk);
- if ((unregister_blkdev(MAJOR_NR, "aztcd") == -EINVAL)) {
- printk("What's that: can't unregister aztcd\n");
- return;
- }
- blk_cleanup_queue(azt_queue);
- if ((azt_port == 0x1f0) || (azt_port == 0x170)) {
- SWITCH_IDE_MASTER;
- release_region(azt_port, 8); /*IDE-interface */
- } else
- release_region(azt_port, 4); /*proprietary interface */
- printk(KERN_INFO "aztcd module released.\n");
-}
-
-module_init(aztcd_init);
-module_exit(aztcd_exit);
-
-/*##########################################################################
- Aztcd State Machine: Controls Drive Operating State
- ##########################################################################
-*/
-static void azt_poll(void)
-{
- int st = 0;
- int loop_ctl = 1;
- int skip = 0;
-
- if (azt_error) {
- if (aztSendCmd(ACMD_GET_ERROR))
- RETURN("azt_poll 1");
- STEN_LOW;
- azt_error = inb(DATA_PORT) & 0xFF;
- printk("aztcd: I/O error 0x%02x\n", azt_error);
- azt_invalidate_buffers();
-#ifdef WARN_IF_READ_FAILURE
- if (AztTries == 5)
- printk
- ("aztcd: Read of Block %d Failed - Maybe Audio Disk?\n",
- azt_next_bn);
-#endif
- if (!AztTries--) {
- printk
- ("aztcd: Read of Block %d Failed, Maybe Audio Disk? Giving up\n",
- azt_next_bn);
- if (azt_transfer_is_active) {
- AztTries = 0;
- loop_ctl = 0;
- }
- if (current_valid())
- end_request(CURRENT, 0);
- AztTries = 5;
- }
- azt_error = 0;
- azt_state = AZT_S_STOP;
- }
-
- while (loop_ctl) {
- loop_ctl = 0; /* each case must flip this back to 1 if we want
- to come back up here */
- switch (azt_state) {
-
- case AZT_S_IDLE:
-#ifdef AZT_TEST3
- if (azt_state != azt_state_old) {
- azt_state_old = azt_state;
- printk("AZT_S_IDLE\n");
- }
-#endif
- return;
-
- case AZT_S_START:
-#ifdef AZT_TEST3
- if (azt_state != azt_state_old) {
- azt_state_old = azt_state;
- printk("AZT_S_START\n");
- }
-#endif
- if (aztSendCmd(ACMD_GET_STATUS))
- RETURN("azt_poll 2"); /*result will be checked by aztStatus() */
- azt_state =
- azt_mode == 1 ? AZT_S_READ : AZT_S_MODE;
- AztTimeout = 3000;
- break;
-
- case AZT_S_MODE:
-#ifdef AZT_TEST3
- if (azt_state != azt_state_old) {
- azt_state_old = azt_state;
- printk("AZT_S_MODE\n");
- }
-#endif
- if (!skip) {
- if ((st = aztStatus()) != -1) {
- if ((st & AST_DSK_CHG)
- || (st & AST_NOT_READY)) {
- aztDiskChanged = 1;
- aztTocUpToDate = 0;
- azt_invalidate_buffers();
- end_request(CURRENT, 0);
- printk
- ("aztcd: Disk Changed or Not Ready 1 - Unmount Disk!\n");
- }
- } else
- break;
- }
- skip = 0;
-
- if ((st & AST_DOOR_OPEN) || (st & AST_NOT_READY)) {
- aztDiskChanged = 1;
- aztTocUpToDate = 0;
- printk
- ("aztcd: Disk Changed or Not Ready 2 - Unmount Disk!\n");
- end_request(CURRENT, 0);
- printk((st & AST_DOOR_OPEN) ?
- "aztcd: door open\n" :
- "aztcd: disk removed\n");
- if (azt_transfer_is_active) {
- azt_state = AZT_S_START;
- loop_ctl = 1; /* goto immediately */
- break;
- }
- azt_state = AZT_S_IDLE;
- while (current_valid())
- end_request(CURRENT, 0);
- return;
- }
-
-/* if (aztSendCmd(ACMD_SET_MODE)) RETURN("azt_poll 3");
- outb(0x01, DATA_PORT);
- PA_OK;
- STEN_LOW;
-*/
- if (aztSendCmd(ACMD_GET_STATUS))
- RETURN("azt_poll 4");
- STEN_LOW;
- azt_mode = 1;
- azt_state = AZT_S_READ;
- AztTimeout = 3000;
-
- break;
-
-
- case AZT_S_READ:
-#ifdef AZT_TEST3
- if (azt_state != azt_state_old) {
- azt_state_old = azt_state;
- printk("AZT_S_READ\n");
- }
-#endif
- if (!skip) {
- if ((st = aztStatus()) != -1) {
- if ((st & AST_DSK_CHG)
- || (st & AST_NOT_READY)) {
- aztDiskChanged = 1;
- aztTocUpToDate = 0;
- azt_invalidate_buffers();
- printk
- ("aztcd: Disk Changed or Not Ready 3 - Unmount Disk!\n");
- end_request(CURRENT, 0);
- }
- } else
- break;
- }
-
- skip = 0;
- if ((st & AST_DOOR_OPEN) || (st & AST_NOT_READY)) {
- aztDiskChanged = 1;
- aztTocUpToDate = 0;
- printk((st & AST_DOOR_OPEN) ?
- "aztcd: door open\n" :
- "aztcd: disk removed\n");
- if (azt_transfer_is_active) {
- azt_state = AZT_S_START;
- loop_ctl = 1;
- break;
- }
- azt_state = AZT_S_IDLE;
- while (current_valid())
- end_request(CURRENT, 0);
- return;
- }
-
- if (current_valid()) {
- struct azt_Play_msf msf;
- int i;
- azt_next_bn = CURRENT->sector / 4;
- azt_hsg2msf(azt_next_bn, &msf.start);
- i = 0;
- /* find out in which track we are */
- while (azt_msf2hsg(&msf.start) >
- azt_msf2hsg(&Toc[++i].trackTime)) {
- };
- if (azt_msf2hsg(&msf.start) <
- azt_msf2hsg(&Toc[i].trackTime) -
- AZT_BUF_SIZ) {
- azt_read_count = AZT_BUF_SIZ; /*fast, because we read ahead */
- /*azt_read_count=CURRENT->nr_sectors; slow, no read ahead */
- } else /* don't read beyond end of track */
-#if AZT_MULTISESSION
- {
- azt_read_count =
- (azt_msf2hsg(&Toc[i].trackTime)
- / 4) * 4 -
- azt_msf2hsg(&msf.start);
- if (azt_read_count < 0)
- azt_read_count = 0;
- if (azt_read_count > AZT_BUF_SIZ)
- azt_read_count =
- AZT_BUF_SIZ;
- printk
- ("aztcd: warning - trying to read beyond end of track\n");
-/* printk("%i %i %li %li\n",i,azt_read_count,azt_msf2hsg(&msf.start),azt_msf2hsg(&Toc[i].trackTime));
-*/ }
-#else
- {
- azt_read_count = AZT_BUF_SIZ;
- }
-#endif
- msf.end.min = 0;
- msf.end.sec = 0;
- msf.end.frame = azt_read_count; /*Mitsumi here reads 0xffffff sectors */
-#ifdef AZT_TEST3
- printk
- ("---reading msf-address %x:%x:%x %x:%x:%x\n",
- msf.start.min, msf.start.sec,
- msf.start.frame, msf.end.min,
- msf.end.sec, msf.end.frame);
- printk
- ("azt_next_bn:%x azt_buf_in:%x azt_buf_out:%x azt_buf_bn:%x\n",
- azt_next_bn, azt_buf_in, azt_buf_out,
- azt_buf_bn[azt_buf_in]);
-#endif
- if (azt_read_mode == AZT_MODE_2) {
- sendAztCmd(ACMD_PLAY_READ_RAW, &msf); /*XA disks in raw mode */
- } else {
- sendAztCmd(ACMD_PLAY_READ, &msf); /*others in cooked mode */
- }
- azt_state = AZT_S_DATA;
- AztTimeout = READ_TIMEOUT;
- } else {
- azt_state = AZT_S_STOP;
- loop_ctl = 1;
- break;
- }
-
- break;
-
-
- case AZT_S_DATA:
-#ifdef AZT_TEST3
- if (azt_state != azt_state_old) {
- azt_state_old = azt_state;
- printk("AZT_S_DATA\n");
- }
-#endif
-
- st = inb(STATUS_PORT) & AFL_STATUSorDATA;
-
- switch (st) {
-
- case AFL_DATA:
-#ifdef AZT_TEST3
- if (st != azt_st_old) {
- azt_st_old = st;
- printk("---AFL_DATA st:%x\n", st);
- }
-#endif
- if (!AztTries--) {
- printk
- ("aztcd: Read of Block %d Failed, Maybe Audio Disk ? Giving up\n",
- azt_next_bn);
- if (azt_transfer_is_active) {
- AztTries = 0;
- break;
- }
- if (current_valid())
- end_request(CURRENT, 0);
- AztTries = 5;
- }
- azt_state = AZT_S_START;
- AztTimeout = READ_TIMEOUT;
- loop_ctl = 1;
- break;
-
- case AFL_STATUSorDATA:
-#ifdef AZT_TEST3
- if (st != azt_st_old) {
- azt_st_old = st;
- printk
- ("---AFL_STATUSorDATA st:%x\n",
- st);
- }
-#endif
- break;
-
- default:
-#ifdef AZT_TEST3
- if (st != azt_st_old) {
- azt_st_old = st;
- printk("---default: st:%x\n", st);
- }
-#endif
- AztTries = 5;
- if (!current_valid() && azt_buf_in == azt_buf_out) {
- azt_state = AZT_S_STOP;
- loop_ctl = 1;
- break;
- }
- if (azt_read_count <= 0)
- printk
- ("aztcd: warning - try to read 0 frames\n");
- while (azt_read_count) { /*??? fast read ahead loop */
- azt_buf_bn[azt_buf_in] = -1;
- DTEN_LOW; /*??? unsolved problem, very
- seldom we get timeouts
- here, don't now the real
- reason. With my drive this
- sometimes also happens with
- Aztech's original driver under
- DOS. Is it a hardware bug?
- I tried to recover from such
- situations here. Zimmermann */
- if (aztTimeOutCount >= AZT_TIMEOUT) {
- printk
- ("read_count:%d CURRENT->nr_sectors:%ld azt_buf_in:%d\n",
- azt_read_count,
- CURRENT->nr_sectors,
- azt_buf_in);
- printk
- ("azt_transfer_is_active:%x\n",
- azt_transfer_is_active);
- azt_read_count = 0;
- azt_state = AZT_S_STOP;
- loop_ctl = 1;
- end_request(CURRENT, 1); /*should we have here (1) or (0)? */
- } else {
- if (azt_read_mode ==
- AZT_MODE_2) {
- insb(DATA_PORT,
- azt_buf +
- CD_FRAMESIZE_RAW
- * azt_buf_in,
- CD_FRAMESIZE_RAW);
- } else {
- insb(DATA_PORT,
- azt_buf +
- CD_FRAMESIZE *
- azt_buf_in,
- CD_FRAMESIZE);
- }
- azt_read_count--;
-#ifdef AZT_TEST3
- printk
- ("AZT_S_DATA; ---I've read data- read_count: %d\n",
- azt_read_count);
- printk
- ("azt_next_bn:%d azt_buf_in:%d azt_buf_out:%d azt_buf_bn:%d\n",
- azt_next_bn,
- azt_buf_in,
- azt_buf_out,
- azt_buf_bn
- [azt_buf_in]);
-#endif
- azt_buf_bn[azt_buf_in] =
- azt_next_bn++;
- if (azt_buf_out == -1)
- azt_buf_out =
- azt_buf_in;
- azt_buf_in =
- azt_buf_in + 1 ==
- AZT_BUF_SIZ ? 0 :
- azt_buf_in + 1;
- }
- }
- if (!azt_transfer_is_active) {
- while (current_valid()) {
- azt_transfer();
- if (CURRENT->nr_sectors ==
- 0)
- end_request(CURRENT, 1);
- else
- break;
- }
- }
-
- if (current_valid()
- && (CURRENT->sector / 4 < azt_next_bn
- || CURRENT->sector / 4 >
- azt_next_bn + AZT_BUF_SIZ)) {
- azt_state = AZT_S_STOP;
- loop_ctl = 1;
- break;
- }
- AztTimeout = READ_TIMEOUT;
- if (azt_read_count == 0) {
- azt_state = AZT_S_STOP;
- loop_ctl = 1;
- break;
- }
- break;
- }
- break;
-
-
- case AZT_S_STOP:
-#ifdef AZT_TEST3
- if (azt_state != azt_state_old) {
- azt_state_old = azt_state;
- printk("AZT_S_STOP\n");
- }
-#endif
- if (azt_read_count != 0)
- printk("aztcd: discard data=%x frames\n",
- azt_read_count);
- while (azt_read_count != 0) {
- int i;
- if (!(inb(STATUS_PORT) & AFL_DATA)) {
- if (azt_read_mode == AZT_MODE_2)
- for (i = 0;
- i < CD_FRAMESIZE_RAW;
- i++)
- inb(DATA_PORT);
- else
- for (i = 0;
- i < CD_FRAMESIZE; i++)
- inb(DATA_PORT);
- }
- azt_read_count--;
- }
- if (aztSendCmd(ACMD_GET_STATUS))
- RETURN("azt_poll 5");
- azt_state = AZT_S_STOPPING;
- AztTimeout = 1000;
- break;
-
- case AZT_S_STOPPING:
-#ifdef AZT_TEST3
- if (azt_state != azt_state_old) {
- azt_state_old = azt_state;
- printk("AZT_S_STOPPING\n");
- }
-#endif
-
- if ((st = aztStatus()) == -1 && AztTimeout)
- break;
-
- if ((st != -1)
- && ((st & AST_DSK_CHG)
- || (st & AST_NOT_READY))) {
- aztDiskChanged = 1;
- aztTocUpToDate = 0;
- azt_invalidate_buffers();
- printk
- ("aztcd: Disk Changed or Not Ready 4 - Unmount Disk!\n");
- end_request(CURRENT, 0);
- }
-
-#ifdef AZT_TEST3
- printk("CURRENT_VALID %d azt_mode %d\n",
- current_valid(), azt_mode);
-#endif
-
- if (current_valid()) {
- if (st != -1) {
- if (azt_mode == 1) {
- azt_state = AZT_S_READ;
- loop_ctl = 1;
- skip = 1;
- break;
- } else {
- azt_state = AZT_S_MODE;
- loop_ctl = 1;
- skip = 1;
- break;
- }
- } else {
- azt_state = AZT_S_START;
- AztTimeout = 1;
- }
- } else {
- azt_state = AZT_S_IDLE;
- return;
- }
- break;
-
- default:
- printk("aztcd: invalid state %d\n", azt_state);
- return;
- } /* case */
- } /* while */
-
-
- if (!AztTimeout--) {
- printk("aztcd: timeout in state %d\n", azt_state);
- azt_state = AZT_S_STOP;
- if (aztSendCmd(ACMD_STOP))
- RETURN("azt_poll 6");
- STEN_LOW_WAIT;
- };
-
- SET_TIMER(azt_poll, HZ / 100);
-}
-
-
-/*###########################################################################
- * Miscellaneous support functions
- ###########################################################################
-*/
-static void azt_hsg2msf(long hsg, struct msf *msf)
-{
- hsg += 150;
- msf->min = hsg / 4500;
- hsg %= 4500;
- msf->sec = hsg / 75;
- msf->frame = hsg % 75;
-#ifdef AZT_DEBUG
- if (msf->min >= 70)
- printk("aztcd: Error hsg2msf address Minutes\n");
- if (msf->sec >= 60)
- printk("aztcd: Error hsg2msf address Seconds\n");
- if (msf->frame >= 75)
- printk("aztcd: Error hsg2msf address Frames\n");
-#endif
- azt_bin2bcd(&msf->min); /* convert to BCD */
- azt_bin2bcd(&msf->sec);
- azt_bin2bcd(&msf->frame);
-}
-
-static long azt_msf2hsg(struct msf *mp)
-{
- return azt_bcd2bin(mp->frame) + azt_bcd2bin(mp->sec) * 75
- + azt_bcd2bin(mp->min) * 4500 - CD_MSF_OFFSET;
-}
-
-static void azt_bin2bcd(unsigned char *p)
-{
- int u, t;
-
- u = *p % 10;
- t = *p / 10;
- *p = u | (t << 4);
-}
-
-static int azt_bcd2bin(unsigned char bcd)
-{
- return (bcd >> 4) * 10 + (bcd & 0xF);
-}
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_BLOCKDEV_MAJOR(AZTECH_CDROM_MAJOR);