diff options
Diffstat (limited to 'drivers/char/ipmi/ipmi_poweroff.c')
| -rw-r--r-- | drivers/char/ipmi/ipmi_poweroff.c | 206 |
1 files changed, 111 insertions, 95 deletions
diff --git a/drivers/char/ipmi/ipmi_poweroff.c b/drivers/char/ipmi/ipmi_poweroff.c index b86186de7f0..a261bd735df 100644 --- a/drivers/char/ipmi/ipmi_poweroff.c +++ b/drivers/char/ipmi/ipmi_poweroff.c @@ -87,7 +87,10 @@ MODULE_PARM_DESC(ifnum_to_use, "The interface number to use for the watchdog " /* parameter definition to allow user to flag power cycle */ module_param(poweroff_powercycle, int, 0644); -MODULE_PARM_DESC(poweroff_powercycle, " Set to non-zero to enable power cycle instead of power down. Power cycle is contingent on hardware support, otherwise it defaults back to power down."); +MODULE_PARM_DESC(poweroff_powercycle, + " Set to non-zero to enable power cycle instead of power" + " down. Power cycle is contingent on hardware support," + " otherwise it defaults back to power down."); /* Stuff from the get device id command. */ static unsigned int mfg_id; @@ -95,22 +98,25 @@ static unsigned int prod_id; static unsigned char capabilities; static unsigned char ipmi_version; -/* We use our own messages for this operation, we don't let the system - allocate them, since we may be in a panic situation. The whole - thing is single-threaded, anyway, so multiple messages are not - required. */ +/* + * We use our own messages for this operation, we don't let the system + * allocate them, since we may be in a panic situation. The whole + * thing is single-threaded, anyway, so multiple messages are not + * required. + */ +static atomic_t dummy_count = ATOMIC_INIT(0); static void dummy_smi_free(struct ipmi_smi_msg *msg) { + atomic_dec(&dummy_count); } static void dummy_recv_free(struct ipmi_recv_msg *msg) { + atomic_dec(&dummy_count); } -static struct ipmi_smi_msg halt_smi_msg = -{ +static struct ipmi_smi_msg halt_smi_msg = { .done = dummy_smi_free }; -static struct ipmi_recv_msg halt_recv_msg = -{ +static struct ipmi_recv_msg halt_recv_msg = { .done = dummy_recv_free }; @@ -127,8 +133,7 @@ static void receive_handler(struct ipmi_recv_msg *recv_msg, void *handler_data) complete(comp); } -static struct ipmi_user_hndl ipmi_poweroff_handler = -{ +static struct ipmi_user_hndl ipmi_poweroff_handler = { .ipmi_recv_hndl = receive_handler }; @@ -152,17 +157,28 @@ static int ipmi_request_wait_for_response(ipmi_user_t user, return halt_recv_msg.msg.data[0]; } -/* We are in run-to-completion mode, no completion is desired. */ +/* Wait for message to complete, spinning. */ static int ipmi_request_in_rc_mode(ipmi_user_t user, struct ipmi_addr *addr, struct kernel_ipmi_msg *send_msg) { int rv; + atomic_set(&dummy_count, 2); rv = ipmi_request_supply_msgs(user, addr, 0, send_msg, NULL, &halt_smi_msg, &halt_recv_msg, 0); - if (rv) + if (rv) { + atomic_set(&dummy_count, 0); return rv; + } + + /* + * Spin until our message is done. + */ + while (atomic_read(&dummy_count) > 0) { + ipmi_poll_interface(user); + cpu_relax(); + } return halt_recv_msg.msg.data[0]; } @@ -184,47 +200,47 @@ static int ipmi_request_in_rc_mode(ipmi_user_t user, static void (*atca_oem_poweroff_hook)(ipmi_user_t user); -static void pps_poweroff_atca (ipmi_user_t user) +static void pps_poweroff_atca(ipmi_user_t user) { - struct ipmi_system_interface_addr smi_addr; - struct kernel_ipmi_msg send_msg; - int rv; - /* - * Configure IPMI address for local access - */ - smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; - smi_addr.channel = IPMI_BMC_CHANNEL; - smi_addr.lun = 0; - - printk(KERN_INFO PFX "PPS powerdown hook used"); - - send_msg.netfn = IPMI_NETFN_OEM; - send_msg.cmd = IPMI_ATCA_PPS_GRACEFUL_RESTART; - send_msg.data = IPMI_ATCA_PPS_IANA; - send_msg.data_len = 3; - rv = ipmi_request_in_rc_mode(user, - (struct ipmi_addr *) &smi_addr, - &send_msg); - if (rv && rv != IPMI_UNKNOWN_ERR_COMPLETION_CODE) { - printk(KERN_ERR PFX "Unable to send ATCA ," - " IPMI error 0x%x\n", rv); - } + struct ipmi_system_interface_addr smi_addr; + struct kernel_ipmi_msg send_msg; + int rv; + /* + * Configure IPMI address for local access + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; + + printk(KERN_INFO PFX "PPS powerdown hook used"); + + send_msg.netfn = IPMI_NETFN_OEM; + send_msg.cmd = IPMI_ATCA_PPS_GRACEFUL_RESTART; + send_msg.data = IPMI_ATCA_PPS_IANA; + send_msg.data_len = 3; + rv = ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + if (rv && rv != IPMI_UNKNOWN_ERR_COMPLETION_CODE) { + printk(KERN_ERR PFX "Unable to send ATCA ," + " IPMI error 0x%x\n", rv); + } return; } -static int ipmi_atca_detect (ipmi_user_t user) +static int ipmi_atca_detect(ipmi_user_t user) { struct ipmi_system_interface_addr smi_addr; struct kernel_ipmi_msg send_msg; int rv; unsigned char data[1]; - /* - * Configure IPMI address for local access - */ - smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; - smi_addr.channel = IPMI_BMC_CHANNEL; - smi_addr.lun = 0; + /* + * Configure IPMI address for local access + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; /* * Use get address info to check and see if we are ATCA @@ -238,28 +254,30 @@ static int ipmi_atca_detect (ipmi_user_t user) (struct ipmi_addr *) &smi_addr, &send_msg); - printk(KERN_INFO PFX "ATCA Detect mfg 0x%X prod 0x%X\n", mfg_id, prod_id); - if((mfg_id == IPMI_MOTOROLA_MANUFACTURER_ID) - && (prod_id == IPMI_MOTOROLA_PPS_IPMC_PRODUCT_ID)) { - printk(KERN_INFO PFX "Installing Pigeon Point Systems Poweroff Hook\n"); + printk(KERN_INFO PFX "ATCA Detect mfg 0x%X prod 0x%X\n", + mfg_id, prod_id); + if ((mfg_id == IPMI_MOTOROLA_MANUFACTURER_ID) + && (prod_id == IPMI_MOTOROLA_PPS_IPMC_PRODUCT_ID)) { + printk(KERN_INFO PFX + "Installing Pigeon Point Systems Poweroff Hook\n"); atca_oem_poweroff_hook = pps_poweroff_atca; } return !rv; } -static void ipmi_poweroff_atca (ipmi_user_t user) +static void ipmi_poweroff_atca(ipmi_user_t user) { struct ipmi_system_interface_addr smi_addr; struct kernel_ipmi_msg send_msg; int rv; unsigned char data[4]; - /* - * Configure IPMI address for local access - */ - smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; - smi_addr.channel = IPMI_BMC_CHANNEL; - smi_addr.lun = 0; + /* + * Configure IPMI address for local access + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; printk(KERN_INFO PFX "Powering down via ATCA power command\n"); @@ -273,23 +291,24 @@ static void ipmi_poweroff_atca (ipmi_user_t user) data[2] = 0; /* Power Level */ data[3] = 0; /* Don't change saved presets */ send_msg.data = data; - send_msg.data_len = sizeof (data); + send_msg.data_len = sizeof(data); rv = ipmi_request_in_rc_mode(user, (struct ipmi_addr *) &smi_addr, &send_msg); - /** At this point, the system may be shutting down, and most - ** serial drivers (if used) will have interrupts turned off - ** it may be better to ignore IPMI_UNKNOWN_ERR_COMPLETION_CODE - ** return code - **/ - if (rv && rv != IPMI_UNKNOWN_ERR_COMPLETION_CODE) { + /* + * At this point, the system may be shutting down, and most + * serial drivers (if used) will have interrupts turned off + * it may be better to ignore IPMI_UNKNOWN_ERR_COMPLETION_CODE + * return code + */ + if (rv && rv != IPMI_UNKNOWN_ERR_COMPLETION_CODE) { printk(KERN_ERR PFX "Unable to send ATCA powerdown message," " IPMI error 0x%x\n", rv); goto out; } - if(atca_oem_poweroff_hook) - return atca_oem_poweroff_hook(user); + if (atca_oem_poweroff_hook) + atca_oem_poweroff_hook(user); out: return; } @@ -310,13 +329,13 @@ static void ipmi_poweroff_atca (ipmi_user_t user) #define IPMI_CPI1_PRODUCT_ID 0x000157 #define IPMI_CPI1_MANUFACTURER_ID 0x0108 -static int ipmi_cpi1_detect (ipmi_user_t user) +static int ipmi_cpi1_detect(ipmi_user_t user) { return ((mfg_id == IPMI_CPI1_MANUFACTURER_ID) && (prod_id == IPMI_CPI1_PRODUCT_ID)); } -static void ipmi_poweroff_cpi1 (ipmi_user_t user) +static void ipmi_poweroff_cpi1(ipmi_user_t user) { struct ipmi_system_interface_addr smi_addr; struct ipmi_ipmb_addr ipmb_addr; @@ -328,12 +347,12 @@ static void ipmi_poweroff_cpi1 (ipmi_user_t user) unsigned char aer_addr; unsigned char aer_lun; - /* - * Configure IPMI address for local access - */ - smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; - smi_addr.channel = IPMI_BMC_CHANNEL; - smi_addr.lun = 0; + /* + * Configure IPMI address for local access + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; printk(KERN_INFO PFX "Powering down via CPI1 power command\n"); @@ -425,7 +444,7 @@ static void ipmi_poweroff_cpi1 (ipmi_user_t user) */ #define DELL_IANA_MFR_ID {0xA2, 0x02, 0x00} -static int ipmi_dell_chassis_detect (ipmi_user_t user) +static int ipmi_dell_chassis_detect(ipmi_user_t user) { const char ipmi_version_major = ipmi_version & 0xF; const char ipmi_version_minor = (ipmi_version >> 4) & 0xF; @@ -444,25 +463,25 @@ static int ipmi_dell_chassis_detect (ipmi_user_t user) #define IPMI_NETFN_CHASSIS_REQUEST 0 #define IPMI_CHASSIS_CONTROL_CMD 0x02 -static int ipmi_chassis_detect (ipmi_user_t user) +static int ipmi_chassis_detect(ipmi_user_t user) { /* Chassis support, use it. */ return (capabilities & 0x80); } -static void ipmi_poweroff_chassis (ipmi_user_t user) +static void ipmi_poweroff_chassis(ipmi_user_t user) { struct ipmi_system_interface_addr smi_addr; struct kernel_ipmi_msg send_msg; int rv; unsigned char data[1]; - /* - * Configure IPMI address for local access - */ - smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; - smi_addr.channel = IPMI_BMC_CHANNEL; - smi_addr.lun = 0; + /* + * Configure IPMI address for local access + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; powercyclefailed: printk(KERN_INFO PFX "Powering %s via IPMI chassis control command\n", @@ -525,15 +544,13 @@ static struct poweroff_function poweroff_functions[] = { /* Called on a powerdown request. */ -static void ipmi_poweroff_function (void) +static void ipmi_poweroff_function(void) { if (!ready) return; /* Use run-to-completion mode, since interrupts may be off. */ - ipmi_user_set_run_to_completion(ipmi_user, 1); specific_poweroff_func(ipmi_user); - ipmi_user_set_run_to_completion(ipmi_user, 0); } /* Wait for an IPMI interface to be installed, the first one installed @@ -561,13 +578,13 @@ static void ipmi_po_new_smi(int if_num, struct device *device) ipmi_ifnum = if_num; - /* - * Do a get device ide and store some results, since this is + /* + * Do a get device ide and store some results, since this is * used by several functions. - */ - smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; - smi_addr.channel = IPMI_BMC_CHANNEL; - smi_addr.lun = 0; + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; send_msg.netfn = IPMI_NETFN_APP_REQUEST; send_msg.cmd = IPMI_GET_DEVICE_ID_CMD; @@ -632,8 +649,7 @@ static void ipmi_po_smi_gone(int if_num) pm_power_off = old_poweroff_func; } -static struct ipmi_smi_watcher smi_watcher = -{ +static struct ipmi_smi_watcher smi_watcher = { .owner = THIS_MODULE, .new_smi = ipmi_po_new_smi, .smi_gone = ipmi_po_smi_gone @@ -675,12 +691,12 @@ static struct ctl_table_header *ipmi_table_header; /* * Startup and shutdown functions. */ -static int ipmi_poweroff_init (void) +static int ipmi_poweroff_init(void) { int rv; - printk (KERN_INFO "Copyright (C) 2004 MontaVista Software -" - " IPMI Powerdown via sys_reboot.\n"); + printk(KERN_INFO "Copyright (C) 2004 MontaVista Software -" + " IPMI Powerdown via sys_reboot.\n"); if (poweroff_powercycle) printk(KERN_INFO PFX "Power cycle is enabled.\n"); |