diff options
Diffstat (limited to 'drivers/char')
63 files changed, 712 insertions, 5324 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index d6fcd0a36f9..4c67727d75b 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -881,16 +881,6 @@ config FTAPE module. To compile this driver as a module, choose M here: the module will be called ftape. - Note that the Ftape-HOWTO is out of date (sorry) and documents the - older version 2.08 of this software but still contains useful - information. There is a web page with more recent documentation at - <http://www.instmath.rwth-aachen.de/~heine/ftape/>. This page - always contains the latest release of the ftape driver and useful - information (backup software, ftape related patches and - documentation, FAQ). Note that the file system interface has - changed quite a bit compared to previous versions of ftape. Please - read <file:Documentation/ftape.txt>. - source "drivers/char/ftape/Kconfig" endmenu @@ -1002,7 +992,7 @@ config HPET_MMAP config HANGCHECK_TIMER tristate "Hangcheck timer" - depends on X86 || IA64 || PPC64 || S390 + depends on X86 || IA64 || PPC64 help The hangcheck-timer module detects when the system has gone out to lunch past a certain margin. It can reboot the system diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index 810679dcbbb..9964c508c11 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -600,6 +600,26 @@ static void __devexit agp_amd64_remove(struct pci_dev *pdev) agp_put_bridge(bridge); } +#ifdef CONFIG_PM + +static int agp_amd64_suspend(struct pci_dev *pdev, pm_message_t state) +{ + pci_save_state(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + + return 0; +} + +static int agp_amd64_resume(struct pci_dev *pdev) +{ + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + + return amd_8151_configure(); +} + +#endif /* CONFIG_PM */ + static struct pci_device_id agp_amd64_pci_table[] = { { .class = (PCI_CLASS_BRIDGE_HOST << 8), @@ -718,6 +738,10 @@ static struct pci_driver agp_amd64_pci_driver = { .id_table = agp_amd64_pci_table, .probe = agp_amd64_probe, .remove = agp_amd64_remove, +#ifdef CONFIG_PM + .suspend = agp_amd64_suspend, + .resume = agp_amd64_resume, +#endif }; diff --git a/drivers/char/agp/ati-agp.c b/drivers/char/agp/ati-agp.c index 53372a83b67..5b74c36c116 100644 --- a/drivers/char/agp/ati-agp.c +++ b/drivers/char/agp/ati-agp.c @@ -244,6 +244,22 @@ static int ati_configure(void) } +#ifdef CONFIG_PM +static int agp_ati_resume(struct pci_dev *dev) +{ + pci_restore_state(dev); + + return ati_configure(); +} + +static int agp_ati_suspend(struct pci_dev *dev, pm_message_t state) +{ + pci_save_state(dev); + + return 0; +} +#endif + /* *Since we don't need contigious memory we just try * to get the gatt table once @@ -525,6 +541,10 @@ static struct pci_driver agp_ati_pci_driver = { .id_table = agp_ati_pci_table, .probe = agp_ati_probe, .remove = agp_ati_remove, +#ifdef CONFIG_PM + .resume = agp_ati_resume, + .suspend = agp_ati_suspend, +#endif }; static int __init agp_ati_init(void) diff --git a/drivers/char/agp/frontend.c b/drivers/char/agp/frontend.c index 17f520c9d47..97eeb2345b1 100644 --- a/drivers/char/agp/frontend.c +++ b/drivers/char/agp/frontend.c @@ -592,7 +592,7 @@ static int agp_mmap(struct file *file, struct vm_area_struct *vma) struct agp_file_private *priv = file->private_data; struct agp_kern_info kerninfo; - down(&(agp_fe.agp_mutex)); + mutex_lock(&(agp_fe.agp_mutex)); if (agp_fe.backend_acquired != TRUE) goto out_eperm; @@ -627,7 +627,7 @@ static int agp_mmap(struct file *file, struct vm_area_struct *vma) size, vma->vm_page_prot)) { goto out_again; } - up(&(agp_fe.agp_mutex)); + mutex_unlock(&(agp_fe.agp_mutex)); return 0; } @@ -643,20 +643,20 @@ static int agp_mmap(struct file *file, struct vm_area_struct *vma) size, vma->vm_page_prot)) { goto out_again; } - up(&(agp_fe.agp_mutex)); + mutex_unlock(&(agp_fe.agp_mutex)); return 0; } out_eperm: - up(&(agp_fe.agp_mutex)); + mutex_unlock(&(agp_fe.agp_mutex)); return -EPERM; out_inval: - up(&(agp_fe.agp_mutex)); + mutex_unlock(&(agp_fe.agp_mutex)); return -EINVAL; out_again: - up(&(agp_fe.agp_mutex)); + mutex_unlock(&(agp_fe.agp_mutex)); return -EAGAIN; } @@ -664,7 +664,7 @@ static int agp_release(struct inode *inode, struct file *file) { struct agp_file_private *priv = file->private_data; - down(&(agp_fe.agp_mutex)); + mutex_lock(&(agp_fe.agp_mutex)); DBG("priv=%p", priv); @@ -687,7 +687,7 @@ static int agp_release(struct inode *inode, struct file *file) agp_remove_file_private(priv); kfree(priv); file->private_data = NULL; - up(&(agp_fe.agp_mutex)); + mutex_unlock(&(agp_fe.agp_mutex)); return 0; } @@ -698,7 +698,7 @@ static int agp_open(struct inode *inode, struct file *file) struct agp_client *client; int rc = -ENXIO; - down(&(agp_fe.agp_mutex)); + mutex_lock(&(agp_fe.agp_mutex)); if (minor != AGPGART_MINOR) goto err_out; @@ -723,13 +723,13 @@ static int agp_open(struct inode *inode, struct file *file) file->private_data = (void *) priv; agp_insert_file_private(priv); DBG("private=%p, client=%p", priv, client); - up(&(agp_fe.agp_mutex)); + mutex_unlock(&(agp_fe.agp_mutex)); return 0; err_out_nomem: rc = -ENOMEM; err_out: - up(&(agp_fe.agp_mutex)); + mutex_unlock(&(agp_fe.agp_mutex)); return rc; } @@ -985,7 +985,7 @@ static int agp_ioctl(struct inode *inode, struct file *file, int ret_val = -ENOTTY; DBG("priv=%p, cmd=%x", curr_priv, cmd); - down(&(agp_fe.agp_mutex)); + mutex_lock(&(agp_fe.agp_mutex)); if ((agp_fe.current_controller == NULL) && (cmd != AGPIOC_ACQUIRE)) { @@ -1055,7 +1055,7 @@ static int agp_ioctl(struct inode *inode, struct file *file, ioctl_out: DBG("ioctl returns %d\n", ret_val); - up(&(agp_fe.agp_mutex)); + mutex_unlock(&(agp_fe.agp_mutex)); return ret_val; } @@ -1081,7 +1081,7 @@ static struct miscdevice agp_miscdev = int agp_frontend_initialize(void) { memset(&agp_fe, 0, sizeof(struct agp_front_data)); - sema_init(&(agp_fe.agp_mutex), 1); + mutex_init(&(agp_fe.agp_mutex)); if (misc_register(&agp_miscdev)) { printk(KERN_ERR PFX "unable to get minor: %d\n", AGPGART_MINOR); diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index e7bed5047dc..631531fd97a 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -422,7 +422,8 @@ static void intel_i830_init_gtt_entries(void) /* Check it's really I915G */ if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915G_HB || agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB || - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945G_HB) + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945G_HB || + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945GM_HB) gtt_entries = MB(48) - KB(size); else gtt_entries = 0; @@ -431,7 +432,8 @@ static void intel_i830_init_gtt_entries(void) /* Check it's really I915G */ if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915G_HB || agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB || - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945G_HB) + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945G_HB || + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945GM_HB) gtt_entries = MB(64) - KB(size); else gtt_entries = 0; @@ -1681,6 +1683,14 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev, } name = "945G"; break; + case PCI_DEVICE_ID_INTEL_82945GM_HB: + if (find_i830(PCI_DEVICE_ID_INTEL_82945GM_IG)) { + bridge->driver = &intel_915_driver; + } else { + bridge->driver = &intel_845_driver; + } + name = "945GM"; + break; case PCI_DEVICE_ID_INTEL_7505_0: bridge->driver = &intel_7505_driver; name = "E7505"; @@ -1821,6 +1831,7 @@ static struct pci_device_id agp_intel_pci_table[] = { ID(PCI_DEVICE_ID_INTEL_82915G_HB), ID(PCI_DEVICE_ID_INTEL_82915GM_HB), ID(PCI_DEVICE_ID_INTEL_82945G_HB), + ID(PCI_DEVICE_ID_INTEL_82945GM_HB), { } }; diff --git a/drivers/char/agp/isoch.c b/drivers/char/agp/isoch.c index 40083241804..7c14a096b85 100644 --- a/drivers/char/agp/isoch.c +++ b/drivers/char/agp/isoch.c @@ -218,10 +218,8 @@ static int agp_3_5_isochronous_node_enable(struct agp_bridge_data *bridge, master[cdev].rq *= (1 << (master[cdev].y - 1)); tot_rq += master[cdev].rq; - - if (cdev == ndevs-1) - master[cdev].n += rem; } + master[ndevs-1].n += rem; /* Figure the number of isochronous and asynchronous RQ slots the * target is providing. */ diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c index 667a21c72ed..7ac365b5d9e 100644 --- a/drivers/char/amiserial.c +++ b/drivers/char/amiserial.c @@ -129,7 +129,6 @@ static struct serial_state rs_table[1]; * memory if large numbers of serial ports are open. */ static unsigned char *tmp_buf; -static DECLARE_MUTEX(tmp_buf_sem); #include <asm/uaccess.h> diff --git a/drivers/char/drm/r128_state.c b/drivers/char/drm/r128_state.c index caeecc2c36d..a080cdd6081 100644 --- a/drivers/char/drm/r128_state.c +++ b/drivers/char/drm/r128_state.c @@ -220,7 +220,7 @@ static __inline__ void r128_emit_tex1(drm_r128_private_t * dev_priv) ADVANCE_RING(); } -static __inline__ void r128_emit_state(drm_r128_private_t * dev_priv) +static void r128_emit_state(drm_r128_private_t * dev_priv) { drm_r128_sarea_t *sarea_priv = dev_priv->sarea_priv; unsigned int dirty = sarea_priv->dirty; diff --git a/drivers/char/esp.c b/drivers/char/esp.c index e469f641c72..3f3ac039f4d 100644 --- a/drivers/char/esp.c +++ b/drivers/char/esp.c @@ -160,7 +160,6 @@ static void rs_wait_until_sent(struct tty_struct *, int); * memory if large numbers of serial ports are open. */ static unsigned char *tmp_buf; -static DECLARE_MUTEX(tmp_buf_sem); static inline int serial_paranoia_check(struct esp_struct *info, char *name, const char *routine) @@ -2493,6 +2492,7 @@ static int __init espserial_init(void) } memset((void *)info, 0, sizeof(struct esp_struct)); + spin_lock_init(&info->lock); /* rx_trigger, tx_trigger are needed by autoconfig */ info->config.rx_trigger = rx_trigger; info->config.tx_trigger = tx_trigger; @@ -2529,7 +2529,6 @@ static int __init espserial_init(void) init_waitqueue_head(&info->close_wait); init_waitqueue_head(&info->delta_msr_wait); init_waitqueue_head(&info->break_wait); - spin_lock_init(&info->lock); ports = info; printk(KERN_INFO "ttyP%d at 0x%04x (irq = %d) is an ESP ", info->line, info->port, info->irq); diff --git a/drivers/char/ftape/Kconfig b/drivers/char/ftape/Kconfig index 7d3ecb56a1b..0d65189a7ae 100644 --- a/drivers/char/ftape/Kconfig +++ b/drivers/char/ftape/Kconfig @@ -25,17 +25,7 @@ config ZFTAPE support", above) then `zft-compressor' will be loaded automatically by zftape when needed. - Despite its name, zftape does NOT use compression by default. The - file <file:Documentation/ftape.txt> contains a short description of - the most important changes in the file system interface compared to - previous versions of ftape. The ftape home page - <http://www.instmath.rwth-aachen.de/~heine/ftape/> contains - further information. - - IMPORTANT NOTE: zftape can read archives created by previous - versions of ftape and provide file mark support (i.e. fast skipping - between tape archives) but previous version of ftape will lack file - mark support when reading archives produced by zftape. + Despite its name, zftape does NOT use compression by default. config ZFT_DFLT_BLK_SZ int "Default block size" diff --git a/drivers/char/generic_serial.c b/drivers/char/generic_serial.c index 204a7302a4a..e38a5f0e07b 100644 --- a/drivers/char/generic_serial.c +++ b/drivers/char/generic_serial.c @@ -34,7 +34,6 @@ #define DEBUG static char * tmp_buf; -static DECLARE_MUTEX(tmp_buf_sem); static int gs_debug; diff --git a/drivers/char/hangcheck-timer.c b/drivers/char/hangcheck-timer.c index 40a67c86420..ac626418b32 100644 --- a/drivers/char/hangcheck-timer.c +++ b/drivers/char/hangcheck-timer.c @@ -117,12 +117,9 @@ __setup("hcheck_reboot", hangcheck_parse_reboot); __setup("hcheck_dump_tasks", hangcheck_parse_dump_tasks); #endif /* not MODULE */ -#if defined(CONFIG_X86) +#if defined(CONFIG_X86) || defined(CONFIG_S390) # define HAVE_MONOTONIC # define TIMER_FREQ 1000000000ULL -#elif defined(CONFIG_S390) -/* FA240000 is 1 Second in the IBM time universe (Page 4-38 Principles of Op for zSeries */ -# define TIMER_FREQ 0xFA240000ULL #elif defined(CONFIG_IA64) # define TIMER_FREQ ((unsigned long long)local_cpu_data->itc_freq) #elif defined(CONFIG_PPC64) @@ -134,12 +131,7 @@ extern unsigned long long monotonic_clock(void); #else static inline unsigned long long monotonic_clock(void) { -# ifdef __s390__ - /* returns the TOD. see 4-38 Principles of Op of zSeries */ - return get_clock(); -# else return get_cycles(); -# endif /* __s390__ */ } #endif /* HAVE_MONOTONIC */ @@ -188,8 +180,6 @@ static int __init hangcheck_init(void) VERSION_STR, hangcheck_tick, hangcheck_margin); #if defined (HAVE_MONOTONIC) printk("Hangcheck: Using monotonic_clock().\n"); -#elif defined(__s390__) - printk("Hangcheck: Using TOD.\n"); #else printk("Hangcheck: Using get_cycles().\n"); #endif /* HAVE_MONOTONIC */ diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c index 3808d957261..66a2fee06eb 100644 --- a/drivers/char/hpet.c +++ b/drivers/char/hpet.c @@ -927,9 +927,9 @@ static acpi_status hpet_resources(struct acpi_resource *res, void *data) if (ACPI_SUCCESS(status)) { unsigned long size; - size = addr.max_address_range - addr.min_address_range + 1; - hdp->hd_phys_address = addr.min_address_range; - hdp->hd_address = ioremap(addr.min_address_range, size); + size = addr.maximum - addr.minimum + 1; + hdp->hd_phys_address = addr.minimum; + hdp->hd_address = ioremap(addr.minimum, size); if (hpet_is_known(hdp)) { printk(KERN_DEBUG "%s: 0x%lx is busy\n", @@ -937,15 +937,15 @@ static acpi_status hpet_resources(struct acpi_resource *res, void *data) iounmap(hdp->hd_address); return -EBUSY; } - } else if (res->id == ACPI_RSTYPE_FIXED_MEM32) { - struct acpi_resource_fixed_mem32 *fixmem32; + } else if (res->type == ACPI_RESOURCE_TYPE_FIXED_MEMORY32) { + struct acpi_resource_fixed_memory32 *fixmem32; fixmem32 = &res->data.fixed_memory32; if (!fixmem32) return -EINVAL; - hdp->hd_phys_address = fixmem32->range_base_address; - hdp->hd_address = ioremap(fixmem32->range_base_address, + hdp->hd_phys_address = fixmem32->address; + hdp->hd_address = ioremap(fixmem32->address, HPET_RANGE_SIZE); if (hpet_is_known(hdp)) { @@ -954,20 +954,20 @@ static acpi_status hpet_resources(struct acpi_resource *res, void *data) iounmap(hdp->hd_address); return -EBUSY; } - } else if (res->id == ACPI_RSTYPE_EXT_IRQ) { - struct acpi_resource_ext_irq *irqp; + } else if (res->type == ACPI_RESOURCE_TYPE_EXTENDED_IRQ) { + struct acpi_resource_extended_irq *irqp; int i; irqp = &res->data.extended_irq; - if (irqp->number_of_interrupts > 0) { - hdp->hd_nirqs = irqp->number_of_interrupts; + if (irqp->interrupt_count > 0) { + hdp->hd_nirqs = irqp->interrupt_count; for (i = 0; i < hdp->hd_nirqs; i++) { int rc = acpi_register_gsi(irqp->interrupts[i], - irqp->edge_level, - irqp->active_high_low); + irqp->triggering, + irqp->polarity); if (rc < 0) return AE_ERROR; hdp->hd_irq[i] = rc; diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index c67ef3e47ad..6ed213bd702 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -1580,11 +1580,6 @@ static int try_init_acpi(int intf_num, struct smi_info **new_info) if (! is_new_interface(-1, addr_space, spmi->addr.address)) return -ENODEV; - if (! spmi->addr.register_bit_width) { - acpi_failure = 1; - return -ENODEV; - } - /* Figure out the interface type. */ switch (spmi->InterfaceType) { @@ -1634,9 +1629,6 @@ static int try_init_acpi(int intf_num, struct smi_info **new_info) regspacings[intf_num] = spmi->addr.register_bit_width / 8; info->io.regspacing = spmi->addr.register_bit_width / 8; } else { - /* Some broken systems get this wrong and set the value - * to zero. Assume it is the default spacing. If that - * is wrong, too bad, the vendor should fix the tables. */ regspacings[intf_num] = DEFAULT_REGSPACING; info->io.regspacing = DEFAULT_REGSPACING; } diff --git a/drivers/char/rio/brates.h b/drivers/char/rio/brates.h deleted file mode 100644 index dd686d58fd6..00000000000 --- a/drivers/char/rio/brates.h +++ /dev/null @@ -1,106 +0,0 @@ -/**************************************************************************** - ******* ******* - ******* BRATES.H ******* - ******* ******* - **************************************************************************** - - Author : Jeremy Rolls - Date : 1 Nov 1990 - - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Version : 0.01 - - - Mods - ---------------------------------------------------------------------------- - Date By Description - ---------------------------------------------------------------------------- - - ***************************************************************************/ - -#ifndef _brates_h -#ifndef lint -/* static char * _brates_h_sccs = "@(#)brates.h 1.4"; */ -#endif -#define _brates_h 1 -/* List of baud rate defines. Most are borrowed from /usr/include/sys/termio.h -*/ -#ifndef INKERNEL - -#define B0 0x00 -#define B50 0x01 -#define B75 0x02 -#define B110 0x03 -#define B134 0x04 -#define B150 0x05 -#define B200 0x06 -#define B300 0x07 -#define B600 0x08 -#define B1200 0x09 -#define B1800 0x0a -#define B2400 0x0b -#define B4800 0x0c -#define B9600 0x0d -#define B19200 0x0e -#define B38400 0x0f - -#endif - -/* -** The following baudrates may or may not be defined -** on various UNIX systems. -** If they are not then we define them. -** If they are then we do not define them ;-) -** -** This is appalling that we use same definitions as UNIX -** for our own download code as there is no garuntee that -** B57600 will be defined as 0x11 by a UNIX system.... -** Arghhhhh!!!!!!!!!!!!!! -*/ -#if !defined(B56000) -#define B56000 0x10 -#endif - -#if !defined(B57600) -#define B57600 0x11 -#endif - -#if !defined(B64000) -#define B64000 0x12 -#endif - -#if !defined(B115200) -#define B115200 0x13 -#endif - - -#if !defined(B2000) -#define B2000 0x14 -#endif - - -#define MAX_RATE B2000 - -struct baud_rate { /* Tag for baud rates */ - /* short host_rate, *//* As passed by the driver */ - short divisor, /* The divisor */ - prescaler; /* The pre-scaler */ -}; - -#endif diff --git a/drivers/char/rio/chan.h b/drivers/char/rio/chan.h deleted file mode 100644 index af14311f9b6..00000000000 --- a/drivers/char/rio/chan.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ -#ifndef _chan_h -#define _chan_h - -#ifndef lint -#ifdef SCCS -static char *_rio_chan_h_sccs = "@(#)chan.h 1.1"; -#endif -#endif - -#define Link0 0 -#define Link1 1 -#define Link2 2 -#define Link3 3 - -#endif diff --git a/drivers/char/rio/cmd.h b/drivers/char/rio/cmd.h deleted file mode 100644 index 797b62400c9..00000000000 --- a/drivers/char/rio/cmd.h +++ /dev/null @@ -1,83 +0,0 @@ - - -/**************************************************************************** - ******* ******* - ******* C O M M A N D P A C K E T H E A D E R S - ******* ******* - **************************************************************************** - - Author : Ian Nandhra - Date : - - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Version : 0.01 - - - Mods - ---------------------------------------------------------------------------- - Date By Description - ---------------------------------------------------------------------------- - - ***************************************************************************/ - - -#ifndef _cmd_h -#define _cmd_h - -#ifndef lint -#ifdef SCCS -static char *_rio_cmd_h_sccs = "@(#)cmd.h 1.1"; -#endif -#endif - - -#define PRE_EMPTIVE_CMD 0x80 -#define INLINE_CMD ~PRE_EMPTIVE_CMD - -#define CMD_IGNORE_PKT ( (ushort) 0) -#define CMD_STATUS_REQ ( (ushort) 1) -#define CMD_UNIT_STATUS_REQ ( (ushort) 2) /* Is this needed ??? */ -#define CMD_CONF_PORT ( (ushort) 3) -#define CMD_CONF_UNIT ( (ushort) 4) -#define CMD_ROUTE_MAP_REQ ( (ushort) 5) -#define CMD_FLUSH_TX ( (ushort) 6) -#define CMD_FLUSH_RX ( (ushort) 7) -#define CMD_PARTION_PORT ( (ushort) 8) -#define CMD_RESET_PORT ( (ushort) 0x0a) -#define CMD_BOOT_UNIT ( (ushort) 0x0b) -#define CMD_FOUND_UNIT ( (ushort) 0x0c) -#define CMD_ATTACHED_RTA_2 ( (ushort) 0x0d) -#define CMD_PROVIDE_BOOT ( (ushort) 0x0e) -#define CMD_CIRRUS ( (ushort) 0x0f) - -#define FORM_STATUS_PKT ( (ushort) 1 ) -#define FORM_POLL_PKT ( (ushort) 2 ) -#define FORM_LINK_STATUS_PKT ( (ushort) 3 ) - - -#define CMD_DATA_PORT ( (ushort) 1 ) -#define CMD_DATA ( (ushort) 2 ) - -#define CMD_TX_PART ( (ushort) 2 ) -#define CMD_RX_PART ( (ushort) 3 ) -#define CMD_RX_LIMIT ( (ushort) 4 ) - -#endif - -/*********** end of file ***********/ diff --git a/drivers/char/rio/data.h b/drivers/char/rio/data.h deleted file mode 100644 index dabc2d1fa40..00000000000 --- a/drivers/char/rio/data.h +++ /dev/null @@ -1,40 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : data.h -** SID : 1.2 -** Last Modified : 11/6/98 11:34:09 -** Retrieved : 11/6/98 11:34:21 -** -** ident @(#)data.h 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rio_datadex__ -#define __rio_datadex__ - -#ifndef lint -static char *_data_h_sccs_ = "@(#)data.h 1.2"; -#endif - -#endif diff --git a/drivers/char/rio/debug.h b/drivers/char/rio/debug.h deleted file mode 100644 index 6ae95c00db4..00000000000 --- a/drivers/char/rio/debug.h +++ /dev/null @@ -1,39 +0,0 @@ -/* -** File: debug.h -** -** Author: David Dix -** -** Created: 12th March 1993 -** -** Last modified: 93/04/27 -** - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#ifndef _debug_h_ -#define _debug_h_ - - -#if defined(DCIRRUS) -#define DBPACKET(pkt, opt, str, chn) debug_packet((pkt), (opt), (str), (chn)) -#else -#define DBPACKET(pkt, opt, str, c) -#endif /* DCIRRUS */ - - -#endif /* _debug_h_ */ diff --git a/drivers/char/rio/eisa.h b/drivers/char/rio/eisa.h deleted file mode 100644 index c2abaf0eab0..00000000000 --- a/drivers/char/rio/eisa.h +++ /dev/null @@ -1,104 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : eisa.h -** SID : 1.2 -** Last Modified : 11/6/98 11:34:10 -** Retrieved : 11/6/98 11:34:21 -** -** ident @(#)eisa.h 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rio_eisa_h__ -#define __rio_eisa_h__ - -#ifdef SCCS_LABELS -#ifndef lint -static char *_eisa_h_sccs_ = "@(#)eisa.h 1.2"; -#endif -#endif - -/* -** things to do with the EISA bus -*/ - -#define RIO_EISA_STRING_ADDRESS 0xfffd9 /* where EISA is stored */ - -#define RIO_MAX_EISA_SLOTS 16 /* how many EISA slots? */ - -#define RIO_EISA_IDENT 0x984D /* Specialix */ -#define RIO_EISA_PRODUCT_CODE 0x14 /* Code 14 */ -#define RIO_EISA_ENABLE_BIT 0x01 /* To enable card */ - -#define EISA_MEMORY_BASE_LO 0xC00 /* A16-A23 */ -#define EISA_MEMORY_BASE_HI 0xC01 /* A24-A31 */ -#define EISA_INTERRUPT_VEC 0xC02 /* see below */ -#define EISA_CONTROL_PORT 0xC02 /* see below */ -#define EISA_INTERRUPT_RESET 0xC03 /* read to clear IRQ */ - -#define EISA_PRODUCT_IDENT_LO 0xC80 /* where RIO_EISA_IDENT is */ -#define EISA_PRODUCT_IDENT_HI 0xC81 -#define EISA_PRODUCT_NUMBER 0xC82 /* where PROD_CODE is */ -#define EISA_REVISION_NUMBER 0xC83 /* revision (1dp) */ -#define EISA_ENABLE 0xC84 /* set LSB to enable card */ -#define EISA_UNIQUE_NUM_0 0xC88 /* vomit */ -#define EISA_UNIQUE_NUM_1 0xC8A -#define EISA_UNIQUE_NUM_2 0xC90 /* bit strangely arranged */ -#define EISA_UNIQUE_NUM_3 0xC92 -#define EISA_MANUF_YEAR 0xC98 /* when */ -#define EISA_MANUF_WEEK 0xC9A /* more when */ - -#define EISA_TP_BOOT_FROM_RAM 0x01 -#define EISA_TP_BOOT_FROM_LINK 0x00 -#define EISA_TP_FAST_LINKS 0x02 -#define EISA_TP_SLOW_LINKS 0x00 -#define EISA_TP_BUS_ENABLE 0x04 -#define EISA_TP_BUS_DISABLE 0x00 -#define EISA_TP_RUN 0x08 -#define EISA_TP_RESET 0x00 -#define EISA_POLLED 0x00 -#define EISA_IRQ_3 0x30 -#define EISA_IRQ_4 0x40 -#define EISA_IRQ_5 0x50 -#define EISA_IRQ_6 0x60 -#define EISA_IRQ_7 0x70 -#define EISA_IRQ_9 0x90 -#define EISA_IRQ_10 0xA0 -#define EISA_IRQ_11 0xB0 -#define EISA_IRQ_12 0xC0 -#define EISA_IRQ_14 0xE0 -#define EISA_IRQ_15 0xF0 - -#define EISA_INTERRUPT_MASK 0xF0 -#define EISA_CONTROL_MASK 0x0F - -#define RIO_EISA_DEFAULT_MODE EISA_TP_SLOW_LINKS - -#define RIOEisaToIvec(X) (uchar )((uchar)((X) & EISA_INTERRUPT_MASK)>>4) - -#define INBZ(z,x) inb(((z)<<12) | (x)) -#define OUTBZ(z,x,y) outb((((z)<<12) | (x)), y) - -#endif /* __rio_eisa_h__ */ diff --git a/drivers/char/rio/enable.h b/drivers/char/rio/enable.h deleted file mode 100644 index e06673fa48c..00000000000 --- a/drivers/char/rio/enable.h +++ /dev/null @@ -1,48 +0,0 @@ -/**************************************************************************** - ******* ******* - ******* E N A B L E H E A D E R S - ******* ******* - **************************************************************************** - - Author : Ian Nandhra - Date : - - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Version : 0.01 - - - Mods - ---------------------------------------------------------------------------- - Date By Description - ---------------------------------------------------------------------------- - - ***************************************************************************/ - -#ifndef lint -#ifdef SCCS -static char *_rio_enable_h_sccs = "@(#)enable.h 1.1"; -#endif -#endif - - -#define ENABLE_LTT TRUE -#define ENABLE_LRT TRUE - - -/*********** end of file ***********/ diff --git a/drivers/char/rio/formpkt.h b/drivers/char/rio/formpkt.h deleted file mode 100644 index 3c7c91ace3e..00000000000 --- a/drivers/char/rio/formpkt.h +++ /dev/null @@ -1,153 +0,0 @@ - - -/**************************************************************************** - ******* ******* - ******* F O R M P A C K E T H E A D E R F I L E - ******* ******* - **************************************************************************** - - Author : Ian Nandhra - Date : - - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Version : 0.01 - - - Mods - ---------------------------------------------------------------------------- - Date By Description - ---------------------------------------------------------------------------- - - ***************************************************************************/ - -#ifndef _formpkt_h -#define _formpkt_h 1 - -#ifndef lint -#ifdef SCCS -static char *_rio_formpkt_h_sccs = "@(#)formpkt.h 1.1"; -#endif -#endif - -typedef struct FORM_BOOT_PKT_1 FORM_BOOT_PKT_1; -struct FORM_BOOT_PKT_1 { - ushort pkt_number; - ushort pkt_total; - ushort boot_top; -}; - -typedef struct FORM_BOOT_PKT_2 FORM_BOOT_PKT_2; -struct FORM_BOOT_PKT_2 { - ushort pkt_number; - char boot_data[10]; -}; - - -typedef struct FORM_ATTACH_RTA FORM_ATTACH_RTA; -struct FORM_ATTACH_RTA { - char cmd_code; - char booter_serial[4]; - char booter_link; - char bootee_serial[4]; - char bootee_link; -}; - - -typedef struct FORM_BOOT_ID FORM_BOOT_ID; -struct FORM_BOOT_ID { - char cmd_code; - char bootee_serial[4]; - char bootee_prod_id; - char bootee_link; -}; - - - -typedef struct FORM_ROUTE_1 FORM_ROUTE_1; -struct FORM_ROUTE_1 { - char cmd_code; - char pkt_number; - char total_in_sequence; - char unit_id; - char host_unit_id; -}; - -typedef struct FORM_ROUTE_2 FORM_ROUTE_2; -struct FORM_ROUTE_2 { - char cmd_code; - char pkt_number; - char total_in_sequence; - char route_data[9]; -}; - -typedef struct FORM_ROUTE_REQ FORM_ROUTE_REQ; -struct FORM_ROUTE_REQ { - char cmd_code; - char pkt_number; - char total_in_sequence; - char route_data[10]; -}; - - -typedef struct FORM_ERROR FORM_ERROR; -struct FORM_ERROR { - char cmd_code; - char error_code; - -}; - -typedef struct FORM_STATUS FORM_STATUS; -struct FORM_STATUS { - char cmd_code; - char status_code; - char last_packet_valid; - char tx_buffer; - char rx_buffer; - char port_status; - char phb_status; -}; - - -typedef struct FORM_LINK_STATUS FORM_LINK_STATUS; -struct FORM_LINK_STATUS { - char cmd_code; - char status_code; - char link_number; - ushort rx_errors; - ushort tx_errors; - ushort csum_errors; - ushort disconnects; -}; - - - -typedef struct FORM_PARTITION FORM_PARTITION; -struct FORM_PARTITION { - char cmd_code; - char status_code; - char port_number; - char tx_max; - char rx_max; - char rx_limit; -}; - - -#endif - -/*********** end of file ***********/ diff --git a/drivers/char/rio/hosthw.h b/drivers/char/rio/hosthw.h deleted file mode 100644 index 6281fe47f4e..00000000000 --- a/drivers/char/rio/hosthw.h +++ /dev/null @@ -1,55 +0,0 @@ -/**************************************************************************** - ******* ******* - ******* H O S T H A R D W A R E - ******* ******* - **************************************************************************** - - Author : Ian Nandhra / Jeremy Rolls - Date : - - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Version : 0.01 - - - Mods - ---------------------------------------------------------------------------- - Date By Description - ---------------------------------------------------------------------------- - - ***************************************************************************/ - - -#ifndef lint -#ifdef SCCS_LABELS -static char *_rio_hosthw_h_sccs = "@(#)hosthw.h 1.2"; -#endif -#endif - -#define SET_OTHER_INTERRUPT ( (volatile u_short *) 0x7c80 ) -#define SET_EISA_INTERRUPT ( (volatile u_short *) 0x7ef0 ) - -#define EISA_HOST 0x30 -#define AT_HOST 0xa0 -#define MCA_HOST 0xb0 -#define PCI_HOST 0xd0 - -#define PRODUCT_MASK 0xf0 - - -/*********** end of file ***********/ diff --git a/drivers/char/rio/lrt.h b/drivers/char/rio/lrt.h deleted file mode 100644 index b41764d7a22..00000000000 --- a/drivers/char/rio/lrt.h +++ /dev/null @@ -1,52 +0,0 @@ -/**************************************************************************** - ******* ******* - ******* L R T - ******* ******* - **************************************************************************** - - Author : Ian Nandhra / Jeremy Rolls - Date : - - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Version : 0.01 - - - Mods - ---------------------------------------------------------------------------- - Date By Description - ---------------------------------------------------------------------------- - - ***************************************************************************/ - -#ifndef lint -#ifdef SCCS_LABELS -static char *_rio_lrt_h_sccs = "@(#)lrt.h 1.1"; -#endif -#endif - - -#ifdef DCIRRUS -#define LRT_STACK (unsigned short) 600 -#else -#define LRT_STACK (ushort) 200 -#endif - - - -/*********** end of file ***********/ diff --git a/drivers/char/rio/ltt.h b/drivers/char/rio/ltt.h deleted file mode 100644 index ab04004d404..00000000000 --- a/drivers/char/rio/ltt.h +++ /dev/null @@ -1,52 +0,0 @@ -/**************************************************************************** - ******* ******* - ******* L T T - ******* ******* - **************************************************************************** - - Author : Ian Nandhra / Jeremy Rolls - Date : - - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Version : 0.01 - - - Mods - ---------------------------------------------------------------------------- - Date By Description - ---------------------------------------------------------------------------- - - ***************************************************************************/ - -#ifndef lint -#ifdef SCCS_LABELS -static char *_rio_ltt_h_sccs = "@(#)ltt.h 1.1"; -#endif -#endif - -#ifdef DCIRRUS -#define LTT_STACK (unsigned short) 600 -#else -#define LTT_STACK (ushort) 200 -#endif - - - - -/*********** end of file ***********/ diff --git a/drivers/char/rio/lttwake.h b/drivers/char/rio/lttwake.h deleted file mode 100644 index fdf0c1f250a..00000000000 --- a/drivers/char/rio/lttwake.h +++ /dev/null @@ -1,50 +0,0 @@ - - - -/**************************************************************************** - ******* ******* - ******* L T T W A K E U P H E A D E R - ******* ******* - **************************************************************************** - - Author : Ian Nandhra - Date : - - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Version : 0.01 - - - Mods - ---------------------------------------------------------------------------- - Date By Description - ---------------------------------------------------------------------------- - - ***************************************************************************/ - -#ifndef lint -#ifdef SCCS_LABELS -static char *_rio_lttwake_h_sccs = "@(#)lttwake.h 1.1"; -#endif -#endif - -#define LTT_WAKEUP_STACK 500 -#define LTT_WAKEUP_INTERVAL (int) (500 * MILLISECOND) - - -/*********** end of file ***********/ diff --git a/drivers/char/rio/mca.h b/drivers/char/rio/mca.h deleted file mode 100644 index d01e76be7a1..00000000000 --- a/drivers/char/rio/mca.h +++ /dev/null @@ -1,73 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : mca.h -** SID : 1.2 -** Last Modified : 11/6/98 11:34:11 -** Retrieved : 11/6/98 11:34:21 -** -** ident @(#)mca.h 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rio_mca_h__ -#define __rio_mca_h__ - -#ifdef SCCS_LABELS -static char *_mca_h_sccs_ = "@(#)mca.h 1.2"; -#endif - -/* -** Micro Channel stuff -*/ - -#define McaMaxSlots 8 -#define McaSlotSelect 0x96 -#define McaSlotEnable 0x08 -#define McaIdLow 0x100 -#define McaIdHigh 0x101 -#define McaIrqEnable 0x102 -#define McaMemory 0x103 -#define McaRIOId 0x6a5c -#define McaIrq9 0x00 -#define McaIrq3 0x02 -#define McaIrq4 0x04 -#define McaIrq7 0x06 -#define McaIrq10 0x08 -#define McaIrq11 0x0A -#define McaIrq12 0x0C -#define McaIrq15 0x0E -#define McaIrqMask 0x0E -#define McaCardEnable 0x01 -#define McaAddress(X) (((X)&0xFF)<<16) - -#define McaTpFastLinks 0x40 -#define McaTpSlowLinks 0x00 -#define McaTpBootFromRam 0x01 -#define McaTpBootFromLink 0x00 -#define McaTpBusEnable 0x02 -#define McaTpBusDisable 0x00 - -#define RIO_MCA_DEFAULT_MODE SLOW_LINKS - -#endif /* __rio_mca_h__ */ diff --git a/drivers/char/rio/mesg.h b/drivers/char/rio/mesg.h deleted file mode 100644 index dd9be586ec6..00000000000 --- a/drivers/char/rio/mesg.h +++ /dev/null @@ -1,41 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : mesg.h -** SID : 1.2 -** Last Modified : 11/6/98 11:34:12 -** Retrieved : 11/6/98 11:34:21 -** -** ident @(#)mesg.h 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rio_mesg_h__ -#define __rio_mesg_h__ - -#ifdef SCCS_LABELS -static char *_mesg_h_sccs_ = "@(#)mesg.h 1.2"; -#endif - - -#endif /* __rio_mesg_h__ */ diff --git a/drivers/char/rio/poll.h b/drivers/char/rio/poll.h deleted file mode 100644 index 9616ee4c6cd..00000000000 --- a/drivers/char/rio/poll.h +++ /dev/null @@ -1,73 +0,0 @@ -/**************************************************************************** - ******* ******* - ******* P O L L - ******* ******* - **************************************************************************** - - Author : Ian Nandhra / Jeremy Rolls - Date : - - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Version : 0.01 - - - Mods - ---------------------------------------------------------------------------- - Date By Description - ---------------------------------------------------------------------------- - - ***************************************************************************/ - -#ifndef _poll_h -#define _poll_h - -#ifndef lint -#ifdef SCCS_LABELS -static char *_rio_poll_h_sccs = "@(#)poll.h 1.2"; -#endif -#endif - - -#ifdef HOST -#define POLL_STACK 100 -#endif -#ifdef RTA -#define POLL_STACK 200 -#endif - -#define POLL_PERIOD (int) SECOND - -/* The various poll commands */ -#define POLL_POLL 0 /* We are connected and happy.. */ -#define POLL_INTRO 1 /* Introduction packet */ -#define POLL_TOPOLOGY 2 /* Topology update */ -#define POLL_ASSIGN 3 /* ID assign */ -#define POLL_FOAD 4 /* F*** Off And Die */ -#define POLL_LMD 5 /* Let Me Die */ -#define POLL_DYB 6 /* Die You Ba***** */ - -/* The way data fields are split up for POLL packets */ -#define POLL_HOST_SERIAL 2 /* Host who booted me */ -#define POLL_MY_SERIAL 6 /* My serial number */ -#define POLL_YOUR_ID 1 /* Your ID number */ -#define POLL_TOPOLOGY_FIELDS 2 /* Topology maps */ - -#endif - -/*********** end of file ***********/ diff --git a/drivers/char/rio/proto.h b/drivers/char/rio/proto.h deleted file mode 100644 index f9a3376333e..00000000000 --- a/drivers/char/rio/proto.h +++ /dev/null @@ -1,244 +0,0 @@ -/* - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#ifndef _prototypes_h -#define _prototypes_h - - -/* -** boot.c -*/ -void init_boot(char *p, short stage); - -/* -** disconct.c -*/ -void kill_boot(LPB * link); -void disconnected(LPB * link); -short boot_3(LPB * link, PKT * pkt); -short send_3_pkt(LPB * link, PKT * pkt); - -/* -** error.c -*/ -void du_error(void); - -/* -** formpkt.c -*/ -ushort sum_it(PKT * pkt); -void form_rup_pkt(RUP * form_rup, PKT * pkt); -void form_poll_pkt(int type, LPB * link, int node); -void form_route_pkt(int type, PKT * pkt, LPB * link); - -/* -** idle.c -*/ -void idle(Process * idle_p); - -/* -** init.c -*/ -void general_init(void); -void mem_halt(int error); - -/* -** linkinit.c -*/ -void initlink(u_short number, LPB * link); -void runlink(LPB * link); - -/* -** list.c -*/ -PKT *get_free_start(void); -void put_free_start(PKT * pkt); - -#ifdef HOST -int can_remove_transmit(PKT ** pkt, PKT * pointer); -#endif - -#ifdef RTA -int spl7(void); -int spl0(void); -Q_BUF *get_free_q(void); -PKT *get_free_end(void); -int add_end(PKT * pkt, PHB * phb, int type); -unsigned short free_packets(PHB * phb, int type); -int can_remove_start(PKT ** pkt, PHB * phb, int type); -int can_add_start(PHB * phb, int type); -int can_add_end(PHB * phb, int type); -void put_free_end(PKT * pkt); -int remove_start(PKT ** pkt, PHB * phb, int type); -#endif - -/* -** Lrt.c -*/ -void lrt(Process * lrt_p, LPB * link); - -#ifdef RTA -void set_led_red(LPB * link); -#endif - -/* -** ltt.c -*/ -void ltt(Process * ltt_p, LPB * link, PHB * phb_ptr[]); -void send_poll(LPB * link); -void request_id(LPB * link); -void send_topology_update(LPB * link); -void send_topology(LPB * link); -void supply_id(LPB * link); - -#ifdef RTA -void redirect_queue(LPB * link, ushort flush); -int obtain_rup(int rup_number, PKT ** pkt_address, LPB * link); -#endif - -#ifdef TESTING_PERF -int consume_cpu(void); -#endif - -/* -** lttwake.c -*/ -#ifdef HOST -void ltt_wakeup(Process * ltt_wakeup_p); -#endif - -/* -** mapgen.c -*/ -void generate_id_map(short mapping, ROUTE_STR route[]); -void gen_map(int mapping, int looking_at, int come_from, ROUTE_STR route[], int link, int *ttl); -void adjust_ttl(int mapping, int looking_at, int come_from, ROUTE_STR route[], int link, int *ttl); -void init_sys_map(void); - -/* -** mmu.c -*/ -char *rio_malloc(unsigned int amount); -char *rio_calloc(unsigned int num, unsigned int size); -ERROR rio_mmu_init(uint total_mem); - -/* -** partn.c -*/ -void partition_tx(struct PHB *phb, u_short tx_size, u_short rx_size, u_short rx_limit); - -/* -** poll.c -*/ -void tx_poll(Process * tx_poll_p); - -/* -** process.c -*/ -int get_proc_space(Process ** pd, int **pws, int wssize); - -/* -** readrom.c -*/ -void read_serial_number(char *buf); - -/* -** rio.c -*/ -int main(void); - -/* -** route.c -*/ -void route_update(PKT * pkt, LPB * link); - -/* -** rtainit.c -*/ -#if defined(RTA) -void rta_init(ushort RtaType); -#endif /* defined(RTA) */ - -/* -** rupboot.c -*/ -void rup_boot(PKT * pkt, RUP * this_rup, LPB * link); - -#ifdef RTA -void kill_your_neighbour(int link_to_kill); -#endif - -/* -** rupcmd.c -*/ -void rup_command(PKT * pkt, struct RUP *this_rup, LPB * link); - -/* -** ruperr.c -*/ -void rup_error(PKT * pkt, RUP * this_rup, LPB * link); -void illegal_cmd(PKT * src_pkt); - -/* -** ruppoll.c -*/ -void rup_poll(PKT * pkt, RUP * this_rup, LPB * link); - -/* -** ruppower.c -*/ -void rup_power(PKT * pkt, RUP * this_rup, LPB * link); - -/* -** ruprm.c -*/ -void rup_route_map(PKT * pkt, RUP * this_rup, LPB * link); - -/* -** rupstat.c -*/ -void rup_status(PKT * pkt, RUP * this_rup, LPB * link); - -/* -** rupsync.c -*/ -void rup_sync(PKT * pkt); - -/* -** rxpkt.c -*/ -ERROR rx_pkt(PKT_ptr_ptr pkt_address, LPB * link); - -/* -** sendsts.c -*/ -void send_status(PKT * requesting_pkt, RUP * this_rup); - -/* -** serial.c -*/ -void assign_serial(char *ser_in, char *ser_out); -int cmp_serial(char *ser_1, char *ser_2); - -/* -** txpkt.c -*/ -ERROR tx_pkt(PKT * pkt, LPB * link); -short send_sync(LPB * link); - -#endif /* _prototypes_h */ diff --git a/drivers/char/rio/rio_linux.c b/drivers/char/rio/rio_linux.c index 8825bd61b7d..c9af283a811 100644 --- a/drivers/char/rio/rio_linux.c +++ b/drivers/char/rio/rio_linux.c @@ -132,16 +132,6 @@ more than 512 ports.... */ */ #define IRQ_RATE_LIMIT 200 -#if 0 -/* Not implemented */ -/* - * The following defines are mostly for testing purposes. But if you need - * some nice reporting in your syslog, you can define them also. - */ -#define RIO_REPORT_FIFO -#define RIO_REPORT_OVERRUN -#endif - /* These constants are derived from SCO Source */ static struct Conf @@ -573,21 +563,6 @@ static void rio_shutdown_port(void *ptr) PortP = (struct Port *) ptr; PortP->gs.tty = NULL; -#if 0 - port->gs.flags &= ~GS_ACTIVE; - if (!port->gs.tty) { - rio_dprintk(RIO_DBUG_TTY, "No tty.\n"); - return; - } - if (!port->gs.tty->termios) { - rio_dprintk(RIO_DEBUG_TTY, "No termios.\n"); - return; - } - if (port->gs.tty->termios->c_cflag & HUPCL) { - rio_setsignals(port, 0, 0); - } -#endif - func_exit(); } @@ -663,11 +638,6 @@ static int rio_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd rc = 0; switch (cmd) { -#if 0 - case TIOCGSOFTCAR: - rc = put_user(((tty->termios->c_cflag & CLOCAL) ? 1 : 0), (unsigned int *) arg); - break; -#endif case TIOCSSOFTCAR: if ((rc = get_user(ival, (unsigned int *) arg)) == 0) { tty->termios->c_cflag = (tty->termios->c_cflag & ~CLOCAL) | (ival ? CLOCAL : 0); @@ -709,36 +679,6 @@ static int rio_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd if (access_ok(VERIFY_READ, (void *) arg, sizeof(struct serial_struct))) rc = gs_setserial(&PortP->gs, (struct serial_struct *) arg); break; -#if 0 - /* - * note: these IOCTLs no longer reach here. Use - * tiocmset/tiocmget driver methods instead. The - * #if 0 disablement predates this comment. - */ - case TIOCMGET: - rc = -EFAULT; - if (access_ok(VERIFY_WRITE, (void *) arg, sizeof(unsigned int))) { - rc = 0; - ival = rio_getsignals(port); - put_user(ival, (unsigned int *) arg); - } - break; - case TIOCMBIS: - if ((rc = get_user(ival, (unsigned int *) arg)) == 0) { - rio_setsignals(port, ((ival & TIOCM_DTR) ? 1 : -1), ((ival & TIOCM_RTS) ? 1 : -1)); - } - break; - case TIOCMBIC: - if ((rc = get_user(ival, (unsigned int *) arg)) == 0) { - rio_setsignals(port, ((ival & TIOCM_DTR) ? 0 : -1), ((ival & TIOCM_RTS) ? 0 : -1)); - } - break; - case TIOCMSET: - if ((rc = get_user(ival, (unsigned int *) arg)) == 0) { - rio_setsignals(port, ((ival & TIOCM_DTR) ? 1 : 0), ((ival & TIOCM_RTS) ? 1 : 0)); - } - break; -#endif default: rc = -ENOIOCTLCMD; break; diff --git a/drivers/char/rio/rioboot.c b/drivers/char/rio/rioboot.c index 34cbb13aad4..92df43552f1 100644 --- a/drivers/char/rio/rioboot.c +++ b/drivers/char/rio/rioboot.c @@ -665,13 +665,6 @@ struct PKT *PacketP; struct CmdBlk *CmdBlkP; uint sequence; -#ifdef CHECK - CheckHost(Host); - CheckRup(Rup); - CheckHostP(HostP); - CheckPacketP(PacketP); -#endif - /* ** If we haven't been told what to boot, we can't boot it. */ @@ -956,11 +949,6 @@ static int RIOBootComplete( struct rio_info *p, struct Host *HostP, uint Rup, st MyType = "RTA"; MyName = HostP->Mapping[Rup].Name; } -#ifdef CHECK - CheckString(MyType); - CheckString(MyName); -#endif - MyLink = RBYTE(PktCmdP->LinkNum); /* @@ -1309,52 +1297,3 @@ struct Host *HostP; } } -#if 0 -/* - Function: This function is to disable the disk interrupt - Returns : Nothing -*/ -void -disable_interrupt(vector) -int vector; -{ - int ps; - int val; - - disable(ps); - if (vector > 40) { - val = 1 << (vector - 40); - __outb(S8259+1, __inb(S8259+1) | val); - } - else { - val = 1 << (vector - 32); - __outb(M8259+1, __inb(M8259+1) | val); - } - restore(ps); -} - -/* - Function: This function is to enable the disk interrupt - Returns : Nothing -*/ -void -enable_interrupt(vector) -int vector; -{ - int ps; - int val; - - disable(ps); - if (vector > 40) { - val = 1 << (vector - 40); - val = ~val; - __outb(S8259+1, __inb(S8259+1) & val); - } - else { - val = 1 << (vector - 32); - val = ~val; - __outb(M8259+1, __inb(M8259+1) & val); - } - restore(ps); -} -#endif diff --git a/drivers/char/rio/riocmd.c b/drivers/char/rio/riocmd.c index b97dd9fdb6b..694bfb9d937 100644 --- a/drivers/char/rio/riocmd.c +++ b/drivers/char/rio/riocmd.c @@ -387,12 +387,6 @@ static int RIOCommandRup(struct rio_info *p, uint Rup, struct Host *HostP, PKT * func_enter(); -#ifdef CHECK - CheckHost(Host); - CheckHostP(HostP); - CheckPacketP(PacketP); -#endif - /* ** 16 port RTA note: ** Command rup packets coming from the RTA will have pkt->data[1] (which @@ -406,10 +400,6 @@ static int RIOCommandRup(struct rio_info *p, uint Rup, struct Host *HostP, PKT * SysPort = UnixRupP->BaseSysPort + (RBYTE(PktCmdP->PhbNum) % (ushort) PORTS_PER_RTA); rio_dprintk(RIO_DEBUG_CMD, "Command on rup %d, port %d\n", rup, SysPort); -#ifdef CHECK - CheckRup(rup); - CheckUnixRupP(UnixRupP); -#endif if (UnixRupP->BaseSysPort == NO_PORT) { rio_dprintk(RIO_DEBUG_CMD, "OBSCURE ERROR!\n"); rio_dprintk(RIO_DEBUG_CMD, "Diagnostics follow. Please WRITE THESE DOWN and report them to Specialix Technical Support\n"); @@ -429,9 +419,6 @@ static int RIOCommandRup(struct rio_info *p, uint Rup, struct Host *HostP, PKT * rio_dprintk(RIO_DEBUG_CMD, "COMMAND information: Host Port Number 0x%x, " "Command Code 0x%x\n", PktCmdP->PhbNum, PktCmdP->Command); return TRUE; } -#ifdef CHECK - CheckSysPort(SysPort); -#endif PortP = p->RIOPortp[SysPort]; rio_spin_lock_irqsave(&PortP->portSem, flags); switch (RBYTE(PktCmdP->Command)) { @@ -604,11 +591,6 @@ int RIOQueueCmdBlk(struct Host *HostP, uint Rup, struct CmdBlk *CmdBlkP) struct UnixRup *UnixRupP; unsigned long flags; -#ifdef CHECK - CheckHostP(HostP); - CheckRup(Rup); - CheckCmdBlkP(CmdBlkP); -#endif if (Rup >= (ushort) (MAX_RUP + LINKS_PER_UNIT)) { rio_dprintk(RIO_DEBUG_CMD, "Illegal rup number %d in RIOQueueCmdBlk\n", Rup); RIOFreeCmdBlk(CmdBlkP); @@ -806,9 +788,6 @@ void RIOPollHostCommands(struct rio_info *p, struct Host *HostP) ** If it returns RIO_FAIL then don't ** send this command yet! */ -#ifdef CHECK - CheckCmdBlkP(CmdBlkP); -#endif if (!(CmdBlkP->PreFuncP ? (*CmdBlkP->PreFuncP) (CmdBlkP->PreArg, CmdBlkP) : TRUE)) { rio_dprintk(RIO_DEBUG_CMD, "Not ready to start command 0x%x\n", (int) CmdBlkP); } else { @@ -816,9 +795,6 @@ void RIOPollHostCommands(struct rio_info *p, struct Host *HostP) /* ** Whammy! blat that pack! */ -#ifdef CHECK - CheckPacketP((PKT *) RIO_PTR(HostP->Caddr, UnixRupP->RupP->txpkt)); -#endif HostP->Copy((caddr_t) & CmdBlkP->Packet, RIO_PTR(HostP->Caddr, UnixRupP->RupP->txpkt), sizeof(PKT)); /* @@ -852,9 +828,6 @@ int RIOWFlushMark(int iPortP, struct CmdBlk *CmdBlkP) unsigned long flags; rio_spin_lock_irqsave(&PortP->portSem, flags); -#ifdef CHECK - CheckPortP(PortP); -#endif PortP->WflushFlag++; PortP->MagicFlags |= MAGIC_FLUSH; rio_spin_unlock_irqrestore(&PortP->portSem, flags); @@ -894,9 +867,6 @@ int RIOUnUse(int iPortP, struct CmdBlk *CmdBlkP) rio_spin_lock_irqsave(&PortP->portSem, flags); -#ifdef CHECK - CheckPortP(PortP); -#endif rio_dprintk(RIO_DEBUG_CMD, "Decrement in use count for port\n"); if (PortP->InUse) { diff --git a/drivers/char/rio/rioctrl.c b/drivers/char/rio/rioctrl.c index 0b7700d2f04..fcf18a06122 100644 --- a/drivers/char/rio/rioctrl.c +++ b/drivers/char/rio/rioctrl.c @@ -308,12 +308,7 @@ int su; } case RIO_DEBUG_MEM: -#ifdef DEBUG_MEM_SUPPORT - RIO_DEBUG_CTRL, if (su) - return rio_RIODebugMemory(RIO_DEBUG_CTRL, arg); - else -#endif - return -EPERM; + return -EPERM; case RIO_ALL_MODEM: rio_dprintk(RIO_DEBUG_CTRL, "RIO_ALL_MODEM\n"); @@ -591,12 +586,7 @@ int su; case RIO_GET_LOG: rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_LOG\n"); -#ifdef LOGGING - RIOGetLog(arg); - return 0; -#else return -EINVAL; -#endif case RIO_GET_MODTYPE: if (copyin((int) arg, (caddr_t) & port, sizeof(uint)) == COPYFAIL) { @@ -684,52 +674,6 @@ int su; rio_dprintk(RIO_DEBUG_CTRL, "entering loop (%d %d)!\n", PortSetup.From, PortSetup.To); for (loop = PortSetup.From; loop <= PortSetup.To; loop++) { rio_dprintk(RIO_DEBUG_CTRL, "in loop (%d)!\n", loop); -#if 0 - PortP = p->RIOPortp[loop]; - if (!PortP->TtyP) - PortP->TtyP = &p->channel[loop]; - - rio_spin_lock_irqsave(&PortP->portSem, flags); - if (PortSetup.IxAny) - PortP->Config |= RIO_IXANY; - else - PortP->Config &= ~RIO_IXANY; - if (PortSetup.IxOn) - PortP->Config |= RIO_IXON; - else - PortP->Config &= ~RIO_IXON; - - /* - ** If the port needs to wait for all a processes output - ** to drain before closing then this flag will be set. - */ - if (PortSetup.Drain) { - PortP->Config |= RIO_WAITDRAIN; - } else { - PortP->Config &= ~RIO_WAITDRAIN; - } - /* - ** Store settings if locking or unlocking port or if the - ** port is not locked, when setting the store option. - */ - if (PortP->Mapped && ((PortSetup.Lock && !PortP->Lock) || (!PortP->Lock && (PortSetup.Store && !PortP->Store)))) { - PortP->StoredTty.iflag = PortP->TtyP->tm.c_iflag; - PortP->StoredTty.oflag = PortP->TtyP->tm.c_oflag; - PortP->StoredTty.cflag = PortP->TtyP->tm.c_cflag; - PortP->StoredTty.lflag = PortP->TtyP->tm.c_lflag; - PortP->StoredTty.line = PortP->TtyP->tm.c_line; - bcopy(PortP->TtyP->tm.c_cc, PortP->StoredTty.cc, NCC + 5); - } - PortP->Lock = PortSetup.Lock; - PortP->Store = PortSetup.Store; - PortP->Xprint.XpCps = PortSetup.XpCps; - bcopy(PortSetup.XpOn, PortP->Xprint.XpOn, MAX_XP_CTRL_LEN); - bcopy(PortSetup.XpOff, PortP->Xprint.XpOff, MAX_XP_CTRL_LEN); - PortP->Xprint.XpOn[MAX_XP_CTRL_LEN - 1] = '\0'; - PortP->Xprint.XpOff[MAX_XP_CTRL_LEN - 1] = '\0'; - PortP->Xprint.XpLen = RIOStrlen(PortP->Xprint.XpOn) + RIOStrlen(PortP->Xprint.XpOff); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); -#endif } rio_dprintk(RIO_DEBUG_CTRL, "after loop (%d)!\n", loop); rio_dprintk(RIO_DEBUG_CTRL, "Retval:%x\n", retval); @@ -801,12 +745,6 @@ int su; rio_dprintk(RIO_DEBUG_CTRL, "Port %d\n", PortTty.port); PortP = (p->RIOPortp[PortTty.port]); -#if 0 - PortTty.Tty.tm.c_iflag = PortP->TtyP->tm.c_iflag; - PortTty.Tty.tm.c_oflag = PortP->TtyP->tm.c_oflag; - PortTty.Tty.tm.c_cflag = PortP->TtyP->tm.c_cflag; - PortTty.Tty.tm.c_lflag = PortP->TtyP->tm.c_lflag; -#endif if (copyout((caddr_t) & PortTty, (int) arg, sizeof(struct PortTty)) == COPYFAIL) { p->RIOError.Error = COPYOUT_FAILED; return -EFAULT; @@ -824,15 +762,6 @@ int su; return -ENXIO; } PortP = (p->RIOPortp[PortTty.port]); -#if 0 - rio_spin_lock_irqsave(&PortP->portSem, flags); - PortP->TtyP->tm.c_iflag = PortTty.Tty.tm.c_iflag; - PortP->TtyP->tm.c_oflag = PortTty.Tty.tm.c_oflag; - PortP->TtyP->tm.c_cflag = PortTty.Tty.tm.c_cflag; - PortP->TtyP->tm.c_lflag = PortTty.Tty.tm.c_lflag; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); -#endif - RIOParam(PortP, CONFIG, PortP->State & RIO_MODEM, OK_TO_SLEEP); return retval; @@ -909,23 +838,6 @@ int su; rio_spin_unlock_irqrestore(&PortP->portSem, flags); return retval; -#ifdef DEBUG_SUPPORTED - case RIO_READ_LEVELS: - { - int num; - rio_dprintk(RIO_DEBUG_CTRL, "RIO_READ_LEVELS\n"); - for (num = 0; RIODbInf[num].Flag; num++); - rio_dprintk(RIO_DEBUG_CTRL, "%d levels to copy\n", num); - if (copyout((caddr_t) RIODbInf, (int) arg, sizeof(struct DbInf) * (num + 1)) == COPYFAIL) { - rio_dprintk(RIO_DEBUG_CTRL, "ReadLevels Copy failed\n"); - p->RIOError.Error = COPYOUT_FAILED; - return -EFAULT; - } - rio_dprintk(RIO_DEBUG_CTRL, "%d levels to copied\n", num); - return retval; - } -#endif - case RIO_READ_CONFIG: rio_dprintk(RIO_DEBUG_CTRL, "RIO_READ_CONFIG\n"); if (copyout((caddr_t) & p->RIOConf, (int) arg, sizeof(struct Conf)) == COPYFAIL) { @@ -1084,30 +996,13 @@ int su; (void) RIOBoardTest(p->RIOHosts[Host].PaddrP, p->RIOHosts[Host].Caddr, p->RIOHosts[Host].Type, p->RIOHosts[Host].Slot); bzero((caddr_t) & p->RIOHosts[Host].Flags, ((int) &p->RIOHosts[Host].____end_marker____) - ((int) &p->RIOHosts[Host].Flags)); p->RIOHosts[Host].Flags = RC_WAITING; -#if 0 - RIOSetupDataStructs(p); -#endif } RIOFoadWakeup(p); p->RIONumBootPkts = 0; p->RIOBooting = 0; - -#ifdef RINGBUFFER_SUPPORT - for (loop = 0; loop < RIO_PORTS; loop++) - if (p->RIOPortp[loop]->TxRingBuffer) - sysfree((void *) p->RIOPortp[loop]->TxRingBuffer, RIOBufferSize); -#endif -#if 0 - bzero((caddr_t) & p->RIOPortp[0], RIO_PORTS * sizeof(struct Port)); -#else printk("HEEEEELP!\n"); -#endif for (loop = 0; loop < RIO_PORTS; loop++) { -#if 0 - p->RIOPortp[loop]->TtyP = &p->channel[loop]; -#endif - spin_lock_init(&p->RIOPortp[loop]->portSem); p->RIOPortp[loop]->InUse = NOT_INUSE; } @@ -1653,10 +1548,6 @@ uchar Cmd; ushort rup; int port; -#ifdef CHECK - CheckPortP(PortP); -#endif - if (PortP->State & RIO_DELETED) { rio_dprintk(RIO_DEBUG_CTRL, "Preemptive command to deleted RTA ignored\n"); return RIO_FAIL; diff --git a/drivers/char/rio/rioinit.c b/drivers/char/rio/rioinit.c index 898a126ae3e..0d44ef464e6 100644 --- a/drivers/char/rio/rioinit.c +++ b/drivers/char/rio/rioinit.c @@ -87,222 +87,8 @@ static char *_rioinit_c_sccs_ = "@(#)rioinit.c 1.3"; int RIOPCIinit(struct rio_info *p, int Mode); -#if 0 -static void RIOAllocateInterrupts(struct rio_info *); -static int RIOReport(struct rio_info *); -static void RIOStopInterrupts(struct rio_info *, int, int); -#endif - static int RIOScrub(int, BYTE *, int); -#if 0 -extern int rio_intr(); - -/* -** Init time code. -*/ -void -rioinit( p, info ) -struct rio_info * p; -struct RioHostInfo * info; -{ - /* - ** Multi-Host card support - taking the easy way out - sorry ! - ** We allocate and set up the Host and Port structs when the - ** driver is called to 'install' the first host. - ** We check for this first 'call' by testing the RIOPortp pointer. - */ - if ( !p->RIOPortp ) - { - rio_dprintk (RIO_DEBUG_INIT, "Allocating and setting up driver data structures\n"); - - RIOAllocDataStructs(p); /* allocate host/port structs */ - RIOSetupDataStructs(p); /* setup topology structs */ - } - - RIOInitHosts( p, info ); /* hunt down the hardware */ - - RIOAllocateInterrupts(p); /* allocate interrupts */ - RIOReport(p); /* show what we found */ -} - -/* -** Initialise the Cards -*/ -void -RIOInitHosts(p, info) -struct rio_info * p; -struct RioHostInfo * info; -{ -/* -** 15.10.1998 ARG - ESIL 0762 part fix -** If there is no ISA card definition - we always look for PCI cards. -** As we currently only support one host card this lets an ISA card -** definition take precedence over PLUG and PLAY. -** No ISA card - we are PLUG and PLAY with PCI. -*/ - - /* - ** Note - for PCI both these will be zero, that's okay because - ** RIOPCIInit() fills them in if a card is found. - */ - p->RIOHosts[p->RIONumHosts].Ivec = info->vector; - p->RIOHosts[p->RIONumHosts].PaddrP = info->location; - - /* - ** Check that we are able to accommodate another host - */ - if ( p->RIONumHosts >= RIO_HOSTS ) - { - p->RIOFailed++; - return; - } - - if ( info->bus & ISA_BUS ) - { - rio_dprintk (RIO_DEBUG_INIT, "initialising card %d (ISA)\n", p->RIONumHosts); - RIOISAinit(p, p->mode); - } - else - { - rio_dprintk (RIO_DEBUG_INIT, "initialising card %d (PCI)\n", p->RIONumHosts); - RIOPCIinit(p, RIO_PCI_DEFAULT_MODE); - } - - rio_dprintk (RIO_DEBUG_INIT, "Total hosts initialised so far : %d\n", p->RIONumHosts); - - -#ifdef FUTURE_RELEASE - if (p->bus & EISA_BUS) - /* EISA card */ - RIOEISAinit(p, RIO_EISA_DEFAULT_MODE); - - if (p->bus & MCA_BUS) - /* MCA card */ - RIOMCAinit(p, RIO_MCA_DEFAULT_MODE); -#endif -} - -/* -** go through memory for an AT host that we pass in the device info -** structure and initialise -*/ -void -RIOISAinit(p, mode) -struct rio_info * p; -int mode; -{ - - /* XXX Need to implement this. */ -#if 0 - p->intr_tid = iointset(p->RIOHosts[p->RIONumHosts].Ivec, - (int (*)())rio_intr, (char*)p->RIONumHosts); - - rio_dprintk (RIO_DEBUG_INIT, "Set interrupt handler, intr_tid = 0x%x\n", p->intr_tid ); - - if (RIODoAT(p, p->RIOHosts[p->RIONumHosts].PaddrP, mode)) { - return; - } - else { - rio_dprintk (RIO_DEBUG_INIT, "RIODoAT failed\n"); - p->RIOFailed++; - } -#endif - -} - -/* -** RIODoAT : -** -** Map in a boards physical address, check that the board is there, -** test the board and if everything is okay assign the board an entry -** in the Rio Hosts structure. -*/ -int -RIODoAT(p, Base, mode) -struct rio_info * p; -int Base; -int mode; -{ -#define FOUND 1 -#define NOT_FOUND 0 - - caddr_t cardAddr; - - /* - ** Check to see if we actually have a board at this physical address. - */ - if ((cardAddr = RIOCheckForATCard(Base)) != 0) { - /* - ** Now test the board to see if it is working. - */ - if (RIOBoardTest(Base, cardAddr, RIO_AT, 0) == RIO_SUCCESS) { - /* - ** Fill out a slot in the Rio host structure. - */ - if (RIOAssignAT(p, Base, cardAddr, mode)) { - return(FOUND); - } - } - RIOMapout(Base, RIO_AT_MEM_SIZE, cardAddr); - } - return(NOT_FOUND); -} - -caddr_t -RIOCheckForATCard(Base) -int Base; -{ - int off; - struct DpRam *cardp; /* (Points at the host) */ - caddr_t virtAddr; - unsigned char RIOSigTab[24]; -/* -** Table of values to search for as prom signature of a host card -*/ - strcpy(RIOSigTab, "JBJGPGGHINSMJPJR"); - - /* - ** Hey! Yes, You reading this code! Yo, grab a load a this: - ** - ** IF the card is using WORD MODE rather than BYTE MODE - ** then it will occupy 128K of PHYSICAL memory area. So, - ** you might think that the following Mapin is wrong. Well, - ** it isn't, because the SECOND 64K of occupied space is an - ** EXACT COPY of the FIRST 64K. (good?), so, we need only - ** map it in in one 64K block. - */ - if (RIOMapin(Base, RIO_AT_MEM_SIZE, &virtAddr) == -1) { - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Couldn't map the board in!\n"); - return((caddr_t)0); - } - - /* - ** virtAddr points to the DP ram of the system. - ** We now cast this to a pointer to a RIO Host, - ** and have a rummage about in the PROM. - */ - cardp = (struct DpRam *)virtAddr; - - for (off=0; RIOSigTab[off]; off++) { - if ((RBYTE(cardp->DpSignature[off]) & 0xFF) != RIOSigTab[off]) { - /* - ** Signature mismatch - card not at this address - */ - RIOMapout(Base, RIO_AT_MEM_SIZE, virtAddr); - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Couldn't match the signature 0x%x 0x%x!\n", - (int)cardp, off); - return((caddr_t)0); - } - } - - /* - ** If we get here then we must have found a valid board so return - ** its virtual address. - */ - return(virtAddr); -} -#endif /** ** RIOAssignAT : @@ -367,667 +153,6 @@ int mode; rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Tests Passed at 0x%x\n", Base); return(1); } -#if 0 -#ifdef FUTURE_RELEASE -int RIOMCAinit(int Mode) -{ - uchar SlotNumber; - caddr_t Caddr; - uint Paddr; - uint Ivec; - int Handle; - int ret = 0; - - /* - ** Valid mode information for MCA cards - ** is only FAST LINKS - */ - Mode = (Mode & FAST_LINKS) ? McaTpFastLinks : McaTpSlowLinks; - rio_dprintk (RIO_DEBUG_INIT, "RIOMCAinit(%d)\n",Mode); - - - /* - ** Check out each of the slots - */ - for (SlotNumber = 0; SlotNumber < McaMaxSlots; SlotNumber++) { - /* - ** Enable the slot we want to talk to - */ - outb( McaSlotSelect, SlotNumber | McaSlotEnable ); - - /* - ** Read the ID word from the slot - */ - if (((inb(McaIdHigh)<< 8)|inb(McaIdLow)) == McaRIOId) - { - rio_dprintk (RIO_DEBUG_INIT, "Potential MCA card in slot %d\n", SlotNumber); - - /* - ** Card appears to be a RIO MCA card! - */ - RIOMachineType |= (1<<RIO_MCA); - - /* - ** Just check we haven't found too many wonderful objects - */ - if ( RIONumHosts >= RIO_HOSTS ) - { - Rprintf(RIOMesgTooManyCards); - return(ret); - } - - /* - ** McaIrqEnable contains the interrupt vector, and a card - ** enable bit. - */ - Ivec = inb(McaIrqEnable); - - rio_dprintk (RIO_DEBUG_INIT, "Ivec is %x\n", Ivec); - - switch ( Ivec & McaIrqMask ) - { - case McaIrq9: - rio_dprintk (RIO_DEBUG_INIT, "IRQ9\n"); - break; - case McaIrq3: - rio_dprintk (RIO_DEBUG_INIT, "IRQ3\n"); - break; - case McaIrq4: - rio_dprintk (RIO_DEBUG_INIT, "IRQ4\n"); - break; - case McaIrq7: - rio_dprintk (RIO_DEBUG_INIT, "IRQ7\n"); - break; - case McaIrq10: - rio_dprintk (RIO_DEBUG_INIT, "IRQ10\n"); - break; - case McaIrq11: - rio_dprintk (RIO_DEBUG_INIT, "IRQ11\n"); - break; - case McaIrq12: - rio_dprintk (RIO_DEBUG_INIT, "IRQ12\n"); - break; - case McaIrq15: - rio_dprintk (RIO_DEBUG_INIT, "IRQ15\n"); - break; - } - - /* - ** If the card enable bit isn't set, then set it! - */ - if ((Ivec & McaCardEnable) != McaCardEnable) { - rio_dprintk (RIO_DEBUG_INIT, "McaCardEnable not set - setting!\n"); - outb(McaIrqEnable,Ivec|McaCardEnable); - } else - rio_dprintk (RIO_DEBUG_INIT, "McaCardEnable already set\n"); - - /* - ** Convert the IRQ enable mask into something useful - */ - Ivec = RIOMcaToIvec[Ivec & McaIrqMask]; - - /* - ** Find the physical address - */ - rio_dprintk (RIO_DEBUG_INIT, "inb(McaMemory) is %x\n", inb(McaMemory)); - Paddr = McaAddress(inb(McaMemory)); - - rio_dprintk (RIO_DEBUG_INIT, "MCA card has Ivec %d Addr %x\n", Ivec, Paddr); - - if ( Paddr != 0 ) - { - - /* - ** Tell the memory mapper that we want to talk to it - */ - Handle = RIOMapin( Paddr, RIO_MCA_MEM_SIZE, &Caddr ); - - if ( Handle == -1 ) { - rio_dprintk (RIO_DEBUG_INIT, "Couldn't map %d bytes at %x\n", RIO_MCA_MEM_SIZE, Paddr; - continue; - } - - rio_dprintk (RIO_DEBUG_INIT, "Board mapped to vaddr 0x%x\n", Caddr); - - /* - ** And check that it is actually there! - */ - if ( RIOBoardTest( Paddr,Caddr,RIO_MCA,SlotNumber ) == RIO_SUCCESS ) - { - rio_dprintk (RIO_DEBUG_INIT, "Board has passed test\n"); - rio_dprintk (RIO_DEBUG_INIT, "Slot %d. Type %d. Paddr 0x%x. Caddr 0x%x. Mode 0x%x.\n", - SlotNumber, RIO_MCA, Paddr, Caddr, Mode); - - /* - ** Board has passed its scrub test. Fill in all the - ** transient stuff. - */ - p->RIOHosts[RIONumHosts].Slot = SlotNumber; - p->RIOHosts[RIONumHosts].Ivec = Ivec; - p->RIOHosts[RIONumHosts].Type = RIO_MCA; - p->RIOHosts[RIONumHosts].Copy = bcopy; - p->RIOHosts[RIONumHosts].PaddrP = Paddr; - p->RIOHosts[RIONumHosts].Caddr = Caddr; - p->RIOHosts[RIONumHosts].CardP = (struct DpRam *)Caddr; - p->RIOHosts[RIONumHosts].Mode = Mode; - WBYTE(p->RIOHosts[p->RIONumHosts].ResetInt , 0xff); - p->RIOHosts[RIONumHosts].UniqueNum = - ((RBYTE(p->RIOHosts[RIONumHosts].Unique[0])&0xFF)<<0)| - ((RBYTE(p->RIOHosts[RIONumHosts].Unique[1])&0xFF)<<8)| - ((RBYTE(p->RIOHosts[RIONumHosts].Unique[2])&0xFF)<<16)| - ((RBYTE(p->RIOHosts[RIONumHosts].Unique[3])&0xFF)<<24); - RIONumHosts++; - ret++; - } - else - { - /* - ** It failed the test, so ignore it. - */ - rio_dprintk (RIO_DEBUG_INIT, "TEST FAILED\n"); - RIOMapout(Paddr, RIO_MCA_MEM_SIZE, Caddr ); - } - } - else - { - rio_dprintk (RIO_DEBUG_INIT, "Slot %d - Paddr zero!\n", SlotNumber); - } - } - else - { - rio_dprintk (RIO_DEBUG_INIT, "Slot %d NOT RIO\n", SlotNumber); - } - } - /* - ** Now we have checked all the slots, turn off the MCA slot selector - */ - outb(McaSlotSelect,0); - rio_dprintk (RIO_DEBUG_INIT, "Slot %d NOT RIO\n", SlotNumber); - return ret; -} - -int RIOEISAinit( int Mode ) -{ - static int EISADone = 0; - uint Paddr; - int PollIntMixMsgDone = 0; - caddr_t Caddr; - ushort Ident; - uchar EisaSlot; - uchar Ivec; - int ret = 0; - - /* - ** The only valid mode information for EISA hosts is fast or slow - ** links. - */ - Mode = (Mode & FAST_LINKS) ? EISA_TP_FAST_LINKS : EISA_TP_SLOW_LINKS; - - if ( EISADone ) - { - rio_dprintk (RIO_DEBUG_INIT, "RIOEISAinit() - already done, return.\n"); - return(0); - } - - EISADone++; - - rio_dprintk (RIO_DEBUG_INIT, "RIOEISAinit()\n"); - - - /* - ** First check all cards to see if ANY are set for polled mode operation. - ** If so, set ALL to polled. - */ - - for ( EisaSlot=1; EisaSlot<=RIO_MAX_EISA_SLOTS; EisaSlot++ ) - { - Ident = (INBZ(EisaSlot,EISA_PRODUCT_IDENT_HI)<<8) | - INBZ(EisaSlot,EISA_PRODUCT_IDENT_LO); - - if ( Ident == RIO_EISA_IDENT ) - { - rio_dprintk (RIO_DEBUG_INIT, "Found Specialix product\n"); - - if ( INBZ(EisaSlot,EISA_PRODUCT_NUMBER) != RIO_EISA_PRODUCT_CODE ) - { - rio_dprintk (RIO_DEBUG_INIT, "Not Specialix RIO - Product number %x\n", - INBZ(EisaSlot, EISA_PRODUCT_NUMBER)); - continue; /* next slot */ - } - /* - ** Its a Specialix RIO! - */ - rio_dprintk (RIO_DEBUG_INIT, "RIO Revision %d\n", - INBZ(EisaSlot, EISA_REVISION_NUMBER)); - - RIOMachineType |= (1<<RIO_EISA); - - /* - ** Just check we haven't found too many wonderful objects - */ - if ( RIONumHosts >= RIO_HOSTS ) - { - Rprintf(RIOMesgTooManyCards); - return 0; - } - - /* - ** Ensure that the enable bit is set! - */ - OUTBZ( EisaSlot, EISA_ENABLE, RIO_EISA_ENABLE_BIT ); - - /* - ** EISA_INTERRUPT_VEC contains the interrupt vector. - */ - Ivec = INBZ(EisaSlot,EISA_INTERRUPT_VEC); - -#ifdef RIODEBUG - switch ( Ivec & EISA_INTERRUPT_MASK ) - { - case EISA_IRQ_3: - rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 3\n"); - break; - case EISA_IRQ_4: - rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 4\n"); - break; - case EISA_IRQ_5: - rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 5\n"); - break; - case EISA_IRQ_6: - rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 6\n"); - break; - case EISA_IRQ_7: - rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 7\n"); - break; - case EISA_IRQ_9: - rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 9\n"); - break; - case EISA_IRQ_10: - rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 10\n"); - break; - case EISA_IRQ_11: - rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 11\n"); - break; - case EISA_IRQ_12: - rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 12\n"); - break; - case EISA_IRQ_14: - rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 14\n"); - break; - case EISA_IRQ_15: - rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 15\n"); - break; - case EISA_POLLED: - rio_dprintk (RIO_DEBUG_INIT, "EISA POLLED\n"); - break; - default: - rio_dprintk (RIO_DEBUG_INIT, NULL,DBG_INIT|DBG_FAIL,"Shagged interrupt number!\n"); - Ivec &= EISA_CONTROL_MASK; - } -#endif - - if ( (Ivec & EISA_INTERRUPT_MASK) == - EISA_POLLED ) - { - RIOWillPoll = 1; - break; /* From EisaSlot loop */ - } - } - } - - /* - ** Do it all again now we know whether to change all cards to polled - ** mode or not - */ - - for ( EisaSlot=1; EisaSlot<=RIO_MAX_EISA_SLOTS; EisaSlot++ ) - { - Ident = (INBZ(EisaSlot,EISA_PRODUCT_IDENT_HI)<<8) | - INBZ(EisaSlot,EISA_PRODUCT_IDENT_LO); - - if ( Ident == RIO_EISA_IDENT ) - { - if ( INBZ(EisaSlot,EISA_PRODUCT_NUMBER) != RIO_EISA_PRODUCT_CODE ) - continue; /* next slot */ - - /* - ** Its a Specialix RIO! - */ - - /* - ** Ensure that the enable bit is set! - */ - OUTBZ( EisaSlot, EISA_ENABLE, RIO_EISA_ENABLE_BIT ); - - /* - ** EISA_INTERRUPT_VEC contains the interrupt vector. - */ - Ivec = INBZ(EisaSlot,EISA_INTERRUPT_VEC); - - if ( RIOWillPoll ) - { - /* - ** If we are going to operate in polled mode, but this - ** board is configured to be interrupt driven, display - ** the message explaining the situation to the punter, - ** assuming we haven't already done so. - */ - - if ( !PollIntMixMsgDone && - (Ivec & EISA_INTERRUPT_MASK) != EISA_POLLED ) - { - Rprintf(RIOMesgAllPolled); - PollIntMixMsgDone = 1; - } - - /* - ** Ungraciously ignore whatever the board reports as its - ** interrupt vector... - */ - - Ivec &= ~EISA_INTERRUPT_MASK; - - /* - ** ...and force it to dance to the poll tune. - */ - - Ivec |= EISA_POLLED; - } - - /* - ** Convert the IRQ enable mask into something useful (0-15) - */ - Ivec = RIOEisaToIvec(Ivec); - - rio_dprintk (RIO_DEBUG_INIT, "EISA host in slot %d has Ivec 0x%x\n", - EisaSlot, Ivec); - - /* - ** Find the physical address - */ - Paddr = (INBZ(EisaSlot,EISA_MEMORY_BASE_HI)<<24) | - (INBZ(EisaSlot,EISA_MEMORY_BASE_LO)<<16); - - rio_dprintk (RIO_DEBUG_INIT, "EISA card has Ivec %d Addr %x\n", Ivec, Paddr); - - if ( Paddr == 0 ) - { - rio_dprintk (RIO_DEBUG_INIT, - "Board in slot %d configured for address zero!\n", EisaSlot); - continue; - } - - /* - ** Tell the memory mapper that we want to talk to it - */ - rio_dprintk (RIO_DEBUG_INIT, "About to map EISA card \n"); - - if (RIOMapin( Paddr, RIO_EISA_MEM_SIZE, &Caddr) == -1) { - rio_dprintk (RIO_DEBUG_INIT, "Couldn't map %d bytes at %x\n", - RIO_EISA_MEM_SIZE,Paddr); - continue; - } - - rio_dprintk (RIO_DEBUG_INIT, "Board mapped to vaddr 0x%x\n", Caddr); - - /* - ** And check that it is actually there! - */ - if ( RIOBoardTest( Paddr,Caddr,RIO_EISA,EisaSlot) == RIO_SUCCESS ) - { - rio_dprintk (RIO_DEBUG_INIT, "Board has passed test\n"); - rio_dprintk (RIO_DEBUG_INIT, - "Slot %d. Ivec %d. Type %d. Paddr 0x%x. Caddr 0x%x. Mode 0x%x.\n", - EisaSlot,Ivec,RIO_EISA,Paddr,Caddr,Mode); - - /* - ** Board has passed its scrub test. Fill in all the - ** transient stuff. - */ - p->RIOHosts[RIONumHosts].Slot = EisaSlot; - p->RIOHosts[RIONumHosts].Ivec = Ivec; - p->RIOHosts[RIONumHosts].Type = RIO_EISA; - p->RIOHosts[RIONumHosts].Copy = bcopy; - p->RIOHosts[RIONumHosts].PaddrP = Paddr; - p->RIOHosts[RIONumHosts].Caddr = Caddr; - p->RIOHosts[RIONumHosts].CardP = (struct DpRam *)Caddr; - p->RIOHosts[RIONumHosts].Mode = Mode; - /* - ** because the EISA prom is mapped into IO space, we - ** need to copy the unqiue number into the memory area - ** that it would have occupied, so that the download - ** code can determine its ID and card type. - */ - WBYTE(p->RIOHosts[RIONumHosts].Unique[0],INBZ(EisaSlot,EISA_UNIQUE_NUM_0)); - WBYTE(p->RIOHosts[RIONumHosts].Unique[1],INBZ(EisaSlot,EISA_UNIQUE_NUM_1)); - WBYTE(p->RIOHosts[RIONumHosts].Unique[2],INBZ(EisaSlot,EISA_UNIQUE_NUM_2)); - WBYTE(p->RIOHosts[RIONumHosts].Unique[3],INBZ(EisaSlot,EISA_UNIQUE_NUM_3)); - p->RIOHosts[RIONumHosts].UniqueNum = - ((RBYTE(p->RIOHosts[RIONumHosts].Unique[0])&0xFF)<<0)| - ((RBYTE(p->RIOHosts[RIONumHosts].Unique[1])&0xFF)<<8)| - ((RBYTE(p->RIOHosts[RIONumHosts].Unique[2])&0xFF)<<16)| - ((RBYTE(p->RIOHosts[RIONumHosts].Unique[3])&0xFF)<<24); - INBZ(EisaSlot,EISA_INTERRUPT_RESET); - RIONumHosts++; - ret++; - } - else - { - /* - ** It failed the test, so ignore it. - */ - rio_dprintk (RIO_DEBUG_INIT, "TEST FAILED\n"); - - RIOMapout(Paddr, RIO_EISA_MEM_SIZE, Caddr ); - } - } - } - if (RIOMachineType & RIO_EISA) - return ret+1; - return ret; -} -#endif - - -#ifndef linux - -#define CONFIG_ADDRESS 0xcf8 -#define CONFIG_DATA 0xcfc -#define FORWARD_REG 0xcfa - - -static int -read_config(int bus_number, int device_num, int r_number) -{ - unsigned int cav; - unsigned int val; - -/* - Build config_address_value: - - 31 24 23 16 15 11 10 8 7 0 - ------------------------------------------------------ - |1| 0000000 | bus_number | device # | 000 | register | - ------------------------------------------------------ -*/ - - cav = r_number & 0xff; - cav |= ((device_num & 0x1f) << 11); - cav |= ((bus_number & 0xff) << 16); - cav |= 0x80000000; /* Enable bit */ - outpd(CONFIG_ADDRESS,cav); - val = inpd(CONFIG_DATA); - outpd(CONFIG_ADDRESS,0); - return val; -} - -static -write_config(bus_number,device_num,r_number,val) -{ - unsigned int cav; - -/* - Build config_address_value: - - 31 24 23 16 15 11 10 8 7 0 - ------------------------------------------------------ - |1| 0000000 | bus_number | device # | 000 | register | - ------------------------------------------------------ -*/ - - cav = r_number & 0xff; - cav |= ((device_num & 0x1f) << 11); - cav |= ((bus_number & 0xff) << 16); - cav |= 0x80000000; /* Enable bit */ - outpd(CONFIG_ADDRESS, cav); - outpd(CONFIG_DATA, val); - outpd(CONFIG_ADDRESS, 0); - return val; -} -#else -/* XXX Implement these... */ -static int -read_config(int bus_number, int device_num, int r_number) -{ - return 0; -} - -static int -write_config(int bus_number, int device_num, int r_number) -{ - return 0; -} - -#endif - -int -RIOPCIinit(p, Mode) -struct rio_info *p; -int Mode; -{ - #define MAX_PCI_SLOT 32 - #define RIO_PCI_JET_CARD 0x200011CB - - static int slot; /* count of machine's PCI slots searched so far */ - caddr_t Caddr; /* Virtual address of the current PCI host card. */ - unsigned char Ivec; /* interrupt vector for the current PCI host */ - unsigned long Paddr; /* Physical address for the current PCI host */ - int Handle; /* Handle to Virtual memory allocated for current PCI host */ - - - rio_dprintk (RIO_DEBUG_INIT, "Search for a RIO PCI card - start at slot %d\n", slot); - - /* - ** Initialise the search status - */ - p->RIOLastPCISearch = RIO_FAIL; - - while ( (slot < MAX_PCI_SLOT) & (p->RIOLastPCISearch != RIO_SUCCESS) ) - { - rio_dprintk (RIO_DEBUG_INIT, "Currently testing slot %d\n", slot); - - if (read_config(0,slot,0) == RIO_PCI_JET_CARD) { - p->RIOHosts[p->RIONumHosts].Ivec = 0; - Paddr = read_config(0,slot,0x18); - Paddr = Paddr - (Paddr & 0x1); /* Mask off the io bit */ - - if ( (Paddr == 0) || ((Paddr & 0xffff0000) == 0xffff0000) ) { - rio_dprintk (RIO_DEBUG_INIT, "Goofed up slot\n"); /* what! */ - slot++; - continue; - } - - p->RIOHosts[p->RIONumHosts].PaddrP = Paddr; - Ivec = (read_config(0,slot,0x3c) & 0xff); - - rio_dprintk (RIO_DEBUG_INIT, "PCI Host at 0x%x, Intr %d\n", (int)Paddr, Ivec); - - Handle = RIOMapin( Paddr, RIO_PCI_MEM_SIZE, &Caddr ); - if (Handle == -1) { - rio_dprintk (RIO_DEBUG_INIT, "Couldn't map %d bytes at 0x%x\n", RIO_PCI_MEM_SIZE, (int)Paddr); - slot++; - continue; - } - p->RIOHosts[p->RIONumHosts].Ivec = Ivec + 32; - p->intr_tid = iointset(p->RIOHosts[p->RIONumHosts].Ivec, - (int (*)())rio_intr, (char *)p->RIONumHosts); - if (RIOBoardTest( Paddr, Caddr, RIO_PCI, 0 ) == RIO_SUCCESS) { - rio_dprintk (RIO_DEBUG_INIT, ("Board has passed test\n"); - rio_dprintk (RIO_DEBUG_INIT, ("Paddr 0x%x. Caddr 0x%x. Mode 0x%x.\n", Paddr, Caddr, Mode); - - /* - ** Board has passed its scrub test. Fill in all the - ** transient stuff. - */ - p->RIOHosts[p->RIONumHosts].Slot = 0; - p->RIOHosts[p->RIONumHosts].Ivec = Ivec + 32; - p->RIOHosts[p->RIONumHosts].Type = RIO_PCI; - p->RIOHosts[p->RIONumHosts].Copy = rio_pcicopy; - p->RIOHosts[p->RIONumHosts].PaddrP = Paddr; - p->RIOHosts[p->RIONumHosts].Caddr = Caddr; - p->RIOHosts[p->RIONumHosts].CardP = (struct DpRam *)Caddr; - p->RIOHosts[p->RIONumHosts].Mode = Mode; - -#if 0 - WBYTE(p->RIOHosts[p->RIONumHosts].Control, - BOOT_FROM_RAM | EXTERNAL_BUS_OFF | - p->RIOHosts[p->RIONumHosts].Mode | - INTERRUPT_DISABLE ); - WBYTE(p->RIOHosts[p->RIONumHosts].ResetInt,0xff); - WBYTE(p->RIOHosts[p->RIONumHosts].Control, - BOOT_FROM_RAM | EXTERNAL_BUS_OFF | - p->RIOHosts[p->RIONumHosts].Mode | - INTERRUPT_DISABLE ); - WBYTE(p->RIOHosts[p->RIONumHosts].ResetInt,0xff); -#else - WBYTE(p->RIOHosts[p->RIONumHosts].ResetInt, 0xff); -#endif - p->RIOHosts[p->RIONumHosts].UniqueNum = - ((RBYTE(p->RIOHosts[p->RIONumHosts].Unique[0])&0xFF)<<0)| - ((RBYTE(p->RIOHosts[p->RIONumHosts].Unique[1])&0xFF)<<8)| - ((RBYTE(p->RIOHosts[p->RIONumHosts].Unique[2])&0xFF)<<16)| - ((RBYTE(p->RIOHosts[p->RIONumHosts].Unique[3])&0xFF)<<24); - - rio_dprintk (RIO_DEBUG_INIT, "Unique no 0x%x.\n", - p->RIOHosts[p->RIONumHosts].UniqueNum); - - p->RIOLastPCISearch = RIO_SUCCESS; - p->RIONumHosts++; - } - } - slot++; - } - - if ( slot >= MAX_PCI_SLOT ) { - rio_dprintk (RIO_DEBUG_INIT, "All %d PCI slots have tested for RIO cards !!!\n", - MAX_PCI_SLOT); - } - - - /* - ** I don't think we want to do this anymore - ** - - if (!p->RIOLastPCISearch == RIO_FAIL ) { - p->RIOFailed++; - } - - ** - */ -} - -#ifdef FUTURE_RELEASE -void riohalt( void ) -{ - int host; - for ( host=0; host<p->RIONumHosts; host++ ) - { - rio_dprintk (RIO_DEBUG_INIT, "Stop host %d\n", host); - (void)RIOBoardTest( p->RIOHosts[host].PaddrP, p->RIOHosts[host].Caddr, p->RIOHosts[host].Type,p->RIOHosts[host].Slot ); - } -} -#endif -#endif static uchar val[] = { #ifdef VERY_LONG_TEST @@ -1262,200 +387,6 @@ int size; return RIO_SUCCESS; } -/* -** try to ensure that every host is either in polled mode -** or is in interrupt mode. Only allow interrupt mode if -** all hosts can interrupt (why?) -** and force into polled mode if told to. Patch up the -** interrupt vector & salute The Queen when you've done. -*/ -#if 0 -static void -RIOAllocateInterrupts(p) -struct rio_info * p; -{ - int Host; - - /* - ** Easy case - if we have been told to poll, then we poll. - */ - if (p->mode & POLLED_MODE) { - RIOStopInterrupts(p, 0, 0); - return; - } - - /* - ** check - if any host has been set to polled mode, then all must be. - */ - for (Host=0; Host<p->RIONumHosts; Host++) { - if ( (p->RIOHosts[Host].Type != RIO_AT) && - (p->RIOHosts[Host].Ivec == POLLED) ) { - RIOStopInterrupts(p, 1, Host ); - return; - } - } - for (Host=0; Host<p->RIONumHosts; Host++) { - if (p->RIOHosts[Host].Type == RIO_AT) { - if ( (p->RIOHosts[Host].Ivec - 32) == 0) { - RIOStopInterrupts(p, 2, Host ); - return; - } - } - } -} - -/* -** something has decided that we can't be doing with these -** new-fangled interrupt thingies. Set everything up to just -** poll. -*/ -static void -RIOStopInterrupts(p, Reason, Host) -struct rio_info * p; -int Reason; -int Host; -{ -#ifdef FUTURE_RELEASE - switch (Reason) { - case 0: /* forced into polling by rio_polled */ - break; - case 1: /* SCU has set 'Host' into polled mode */ - break; - case 2: /* there aren't enough interrupt vectors for 'Host' */ - break; - } -#endif - - for (Host=0; Host<p->RIONumHosts; Host++ ) { - struct Host *HostP = &p->RIOHosts[Host]; - - switch (HostP->Type) { - case RIO_AT: - /* - ** The AT host has it's interrupts disabled by clearing the - ** int_enable bit. - */ - HostP->Mode &= ~INTERRUPT_ENABLE; - HostP->Ivec = POLLED; - break; -#ifdef FUTURE_RELEASE - case RIO_EISA: - /* - ** The EISA host has it's interrupts disabled by setting the - ** Ivec to zero - */ - HostP->Ivec = POLLED; - break; -#endif - case RIO_PCI: - /* - ** The PCI host has it's interrupts disabled by clearing the - ** int_enable bit, like a regular host card. - */ - HostP->Mode &= ~RIO_PCI_INT_ENABLE; - HostP->Ivec = POLLED; - break; -#ifdef FUTURE_RELEASE - case RIO_MCA: - /* - ** There's always one, isn't there? - ** The MCA host card cannot have it's interrupts disabled. - */ - RIOPatchVec(HostP); - break; -#endif - } - } -} - -/* -** This function is called at init time to setup the data structures. -*/ -void -RIOAllocDataStructs(p) -struct rio_info * p; -{ - int port, - host, - tm; - - p->RIOPortp = (struct Port *)sysbrk(RIO_PORTS * sizeof(struct Port)); - if (!p->RIOPortp) { - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: No memory for port structures\n"); - p->RIOFailed++; - return; - } - bzero( p->RIOPortp, sizeof(struct Port) * RIO_PORTS ); - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: allocated and cleared memory for port structs\n"); - rio_dprintk (RIO_DEBUG_INIT, "First RIO port struct @0x%x, size=0x%x bytes\n", - (int)p->RIOPortp, sizeof(struct Port)); - - for( port=0; port<RIO_PORTS; port++ ) { - p->RIOPortp[port].PortNum = port; - p->RIOPortp[port].TtyP = &p->channel[port]; - sreset (p->RIOPortp[port].InUse); /* Let the first guy uses it */ - p->RIOPortp[port].portSem = -1; /* Let the first guy takes it */ - p->RIOPortp[port].ParamSem = -1; /* Let the first guy takes it */ - p->RIOPortp[port].timeout_id = 0; /* Let the first guy takes it */ - } - - p->RIOHosts = (struct Host *)sysbrk(RIO_HOSTS * sizeof(struct Host)); - if (!p->RIOHosts) { - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: No memory for host structures\n"); - p->RIOFailed++; - return; - } - bzero(p->RIOHosts, sizeof(struct Host)*RIO_HOSTS); - rio_dprintk (RIO_DEBUG_INIT, "RIO-init: allocated and cleared memory for host structs\n"); - rio_dprintk (RIO_DEBUG_INIT, "First RIO host struct @0x%x, size=0x%x bytes\n", - (int)p->RIOHosts, sizeof(struct Host)); - - for( host=0; host<RIO_HOSTS; host++ ) { - spin_lock_init (&p->RIOHosts[host].HostLock); - p->RIOHosts[host].timeout_id = 0; /* Let the first guy takes it */ - } - /* - ** check that the buffer size is valid, round down to the next power of - ** two if necessary; if the result is zero, then, hey, no double buffers. - */ - for ( tm = 1; tm && tm <= p->RIOConf.BufferSize; tm <<= 1 ) - ; - tm >>= 1; - p->RIOBufferSize = tm; - p->RIOBufferMask = tm ? tm - 1 : 0; -} - -/* -** this function gets called whenever the data structures need to be -** re-setup, for example, after a riohalt (why did I ever invent it?) -*/ -void -RIOSetupDataStructs(p) -struct rio_info * p; -{ - int host, entry, rup; - - for ( host=0; host<RIO_HOSTS; host++ ) { - struct Host *HostP = &p->RIOHosts[host]; - for ( entry=0; entry<LINKS_PER_UNIT; entry++ ) { - HostP->Topology[entry].Unit = ROUTE_DISCONNECT; - HostP->Topology[entry].Link = NO_LINK; - } - bcopy("HOST X", HostP->Name, 7); - HostP->Name[5] = '1'+host; - for (rup=0; rup<(MAX_RUP + LINKS_PER_UNIT); rup++) { - if (rup < MAX_RUP) { - for (entry=0; entry<LINKS_PER_UNIT; entry++ ) { - HostP->Mapping[rup].Topology[entry].Unit = ROUTE_DISCONNECT; - HostP->Mapping[rup].Topology[entry].Link = NO_LINK; - } - RIODefaultName(p, HostP, rup); - } - spin_lock_init(&HostP->UnixRups[rup].RupLock); - } - } -} -#endif int RIODefaultName(p, HostP, UnitId) @@ -1463,10 +394,6 @@ struct rio_info * p; struct Host * HostP; uint UnitId; { -#ifdef CHECK - CheckHost( Host ); - CheckUnitId( UnitId ); -#endif bcopy("UNKNOWN RTA X-XX",HostP->Mapping[UnitId].Name,17); HostP->Mapping[UnitId].Name[12]='1'+(HostP-p->RIOHosts); if ((UnitId+1) > 9) { @@ -1483,33 +410,6 @@ uint UnitId; #define RIO_RELEASE "Linux" #define RELEASE_ID "1.0" -#if 0 -static int -RIOReport(p) -struct rio_info * p; -{ - char * RIORelease = RIO_RELEASE; - char * RIORelID = RELEASE_ID; - int host; - - rio_dprintk (RIO_DEBUG_INIT, "RIO : Release: %s ID: %s\n", RIORelease, RIORelID); - - if ( p->RIONumHosts==0 ) { - rio_dprintk (RIO_DEBUG_INIT, "\nNo Hosts configured\n"); - return(0); - } - - for ( host=0; host < p->RIONumHosts; host++ ) { - struct Host *HostP = &p->RIOHosts[host]; - switch ( HostP->Type ) { - case RIO_AT: - rio_dprintk (RIO_DEBUG_INIT, "AT BUS : found the card at 0x%x\n", HostP->PaddrP); - } - } - return 0; -} -#endif - static struct rioVersion stVersion; struct rioVersion * @@ -1523,27 +423,6 @@ RIOVersid(void) return &stVersion; } -#if 0 -int -RIOMapin(paddr, size, vaddr) -paddr_t paddr; -int size; -caddr_t * vaddr; -{ - *vaddr = (caddr_t)permap( (long)paddr, size); - return ((int)*vaddr); -} - -void -RIOMapout(paddr, size, vaddr) -paddr_t paddr; -long size; -caddr_t vaddr; -{ -} -#endif - - void RIOHostReset(Type, DpRamP, Slot) uint Type; @@ -1570,31 +449,6 @@ uint Slot; WBYTE(DpRamP->DpResetTpu, 0xFF); udelay(3); break; -#ifdef FUTURE_RELEASE - case RIO_EISA: - /* - ** Bet this doesn't work! - */ - OUTBZ( Slot, EISA_CONTROL_PORT, - EISA_TP_RUN | EISA_TP_BUS_DISABLE | - EISA_TP_SLOW_LINKS | EISA_TP_BOOT_FROM_RAM ); - OUTBZ( Slot, EISA_CONTROL_PORT, - EISA_TP_RESET | EISA_TP_BUS_DISABLE | - EISA_TP_SLOW_LINKS | EISA_TP_BOOT_FROM_RAM ); - suspend( 3 ); - OUTBZ( Slot, EISA_CONTROL_PORT, - EISA_TP_RUN | EISA_TP_BUS_DISABLE | - EISA_TP_SLOW_LINKS | EISA_TP_BOOT_FROM_RAM ); - break; - case RIO_MCA: - WBYTE(DpRamP->DpControl , McaTpBootFromRam | McaTpBusDisable ); - WBYTE(DpRamP->DpResetTpu , 0xFF ); - suspend( 3 ); - WBYTE(DpRamP->DpControl , McaTpBootFromRam | McaTpBusDisable ); - WBYTE(DpRamP->DpResetTpu , 0xFF ); - suspend( 3 ); - break; -#endif case RIO_PCI: rio_dprintk (RIO_DEBUG_INIT, " (RIO_PCI)\n"); DpRamP->DpControl = RIO_PCI_BOOT_FROM_RAM; @@ -1604,12 +458,6 @@ uint Slot; /* for (i=0; i<6000; i++); */ /* suspend( 3 ); */ break; -#ifdef FUTURE_RELEASE - default: - Rprintf(RIOMesgNoSupport,Type,DpRamP,Slot); - return; -#endif - default: rio_dprintk (RIO_DEBUG_INIT, " (UNKNOWN)\n"); break; diff --git a/drivers/char/rio/riolocks.h b/drivers/char/rio/riolocks.h deleted file mode 100644 index 0e0cdacebe0..00000000000 --- a/drivers/char/rio/riolocks.h +++ /dev/null @@ -1,43 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : riolocks.h -** SID : 1.2 -** Last Modified : 11/6/98 11:34:13 -** Retrieved : 11/6/98 11:34:22 -** -** ident @(#)riolocks.h 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rio_riolocks_h__ -#define __rio_riolocks_h__ - -#ifdef SCCS_LABELS -static char *_riolocks_h_sccs_ = "@(#)riolocks.h 1.2"; -#endif - -#define LOCKB(lk) lockb(lk); -#define UNLOCKB(lk, oldspl) unlockb(lk, oldspl); - -#endif diff --git a/drivers/char/rio/rioparam.c b/drivers/char/rio/rioparam.c index 4cc7f4942bf..c622f46d6d7 100644 --- a/drivers/char/rio/rioparam.c +++ b/drivers/char/rio/rioparam.c @@ -195,27 +195,6 @@ int SleepFlag; ** paramed with OPEN, we want to restore the saved port termio, but ** only if StoredTermio has been saved, i.e. NOT 1st open after reboot. */ -#if 0 - if (PortP->FirstOpen) { - PortP->StoredTty.iflag = TtyP->tm.c_iflag; - PortP->StoredTty.oflag = TtyP->tm.c_oflag; - PortP->StoredTty.cflag = TtyP->tm.c_cflag; - PortP->StoredTty.lflag = TtyP->tm.c_lflag; - PortP->StoredTty.line = TtyP->tm.c_line; - for (i = 0; i < NCC + 5; i++) - PortP->StoredTty.cc[i] = TtyP->tm.c_cc[i]; - PortP->FirstOpen = 0; - } else if (PortP->Store || PortP->Lock) { - rio_dprintk(RIO_DEBUG_PARAM, "OPEN: Restoring stored/locked params\n"); - TtyP->tm.c_iflag = PortP->StoredTty.iflag; - TtyP->tm.c_oflag = PortP->StoredTty.oflag; - TtyP->tm.c_cflag = PortP->StoredTty.cflag; - TtyP->tm.c_lflag = PortP->StoredTty.lflag; - TtyP->tm.c_line = PortP->StoredTty.line; - for (i = 0; i < NCC + 5; i++) - TtyP->tm.c_cc[i] = PortP->StoredTty.cc[i]; - } -#endif } /* @@ -273,16 +252,6 @@ int SleepFlag; phb_param_ptr = (struct phb_param *) PacketP->data; -#if 0 - /* - ** COR 1 - */ - if (TtyP->tm.c_iflag & INPCK) { - rio_dprintk(RIO_DEBUG_PARAM, "Parity checking on input enabled\n"); - Cor1 |= COR1_INPCK; - } -#endif - switch (TtyP->termios->c_cflag & CSIZE) { case CS5: { @@ -524,10 +493,6 @@ int SleepFlag; if (TtyP->termios->c_cflag & XMT1EN) rio_dprintk(RIO_DEBUG_PARAM, "XMT1EN (?)\n"); #endif -#if 0 - if (TtyP->termios->c_cflag & LOBLK) - rio_dprintk(RIO_DEBUG_PARAM, "LOBLK - JCL output blocks when not current\n"); -#endif if (TtyP->termios->c_lflag & ISIG) rio_dprintk(RIO_DEBUG_PARAM, "Input character signal generating enabled\n"); if (TtyP->termios->c_lflag & ICANON) @@ -572,14 +537,6 @@ int SleepFlag; rio_dprintk(RIO_DEBUG_PARAM, "Carriage return delay set\n"); if (TtyP->termios->c_oflag & TABDLY) rio_dprintk(RIO_DEBUG_PARAM, "Tab delay set\n"); -#if 0 - if (TtyP->termios->c_oflag & BSDLY) - rio_dprintk(RIO_DEBUG_PARAM, "Back-space delay set\n"); - if (TtyP->termios->c_oflag & VTDLY) - rio_dprintk(RIO_DEBUG_PARAM, "Vertical tab delay set\n"); - if (TtyP->termios->c_oflag & FFDLY) - rio_dprintk(RIO_DEBUG_PARAM, "Form-feed delay set\n"); -#endif /* ** These things are kind of useful in a later life! */ diff --git a/drivers/char/rio/rioroute.c b/drivers/char/rio/rioroute.c index 0f4cd33ba64..f98888f5265 100644 --- a/drivers/char/rio/rioroute.c +++ b/drivers/char/rio/rioroute.c @@ -112,15 +112,6 @@ int RIORouteRup(struct rio_info *p, uint Rup, struct Host *HostP, PKT * PacketP) int Lies; unsigned long flags; -#ifdef STACK - RIOStackCheck("RIORouteRup"); -#endif -#ifdef CHECK - CheckPacketP(PacketP); - CheckHostP(HostP); - CheckRup(Rup); - CheckHost(Host); -#endif /* ** Is this unit telling us it's current link topology? */ @@ -540,9 +531,6 @@ uint unit; for (port = 0; port < PORTS_PER_RTA; port++, PortN++) { ushort dest_port = port + 8; -#if 0 - uint PktInt; -#endif WORD *TxPktP; PKT *Pkt; @@ -623,10 +611,6 @@ uint UnitId; unsigned long flags; rio_spin_lock_irqsave(&HostP->HostLock, flags); -#ifdef CHECK - CheckHostP(HostP); - CheckUnitId(UnitId); -#endif if (RIOCheck(HostP, UnitId)) { rio_dprintk(RIO_DEBUG_ROUTE, "Unit %d is NOT isolated\n", UnitId); rio_spin_unlock_irqrestore(&HostP->HostLock, flags); @@ -651,10 +635,6 @@ uint UnitId; { uint link, unit; -#ifdef CHECK - CheckHostP(HostP); - CheckUnitId(UnitId); -#endif UnitId--; /* this trick relies on the Unit Id being UNSIGNED! */ if (UnitId >= MAX_RUP) /* dontcha just lurv unsigned maths! */ @@ -684,10 +664,6 @@ uint UnitId; { unsigned char link; -#ifdef CHECK - CheckHostP(HostP); - CheckUnitId(UnitId); -#endif /* rio_dprint(RIO_DEBUG_ROUTE, ("Check to see if unit %d has a route to the host\n",UnitId)); */ rio_dprintk(RIO_DEBUG_ROUTE, "RIOCheck : UnitID = %d\n", UnitId); diff --git a/drivers/char/rio/riotable.c b/drivers/char/rio/riotable.c index 42c3dffcbbb..a86b216ab65 100644 --- a/drivers/char/rio/riotable.c +++ b/drivers/char/rio/riotable.c @@ -754,11 +754,6 @@ struct Map *HostMapP; ushort RtaType; unsigned long flags; -#ifdef CHECK - CheckHostP(HostP); - CheckHostMapP(HostMapP); -#endif - rio_dprintk(RIO_DEBUG_TABLE, "Mapping sysport %d to id %d\n", (int) HostMapP->SysPort, HostMapP->ID); /* @@ -784,9 +779,6 @@ struct Map *HostMapP; rio_dprintk(RIO_DEBUG_TABLE, "c1 p = %p, p->rioPortp = %p\n", p, p->RIOPortp); PortP = p->RIOPortp[SysPort]; -#if 0 - PortP->TtyP = &p->channel[SysPort]; -#endif rio_dprintk(RIO_DEBUG_TABLE, "Map port\n"); /* diff --git a/drivers/char/rio/riotime.h b/drivers/char/rio/riotime.h deleted file mode 100644 index 35e01cd103d..00000000000 --- a/drivers/char/rio/riotime.h +++ /dev/null @@ -1,63 +0,0 @@ -/**************************************************************************** - ******* ******* - ******* T I M E - ******* ******* - **************************************************************************** - - Author : Jeremy Rolls - Date : - - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Version : 0.01 - - - Mods - ---------------------------------------------------------------------------- - Date By Description - ---------------------------------------------------------------------------- - - ***************************************************************************/ - -#ifndef _riotime_h -#define _riotime_h 1 - -#ifndef lint -#ifdef SCCS -static char *_rio_riotime_h_sccs = "@(#)riotime.h 1.1"; -#endif -#endif - -#define TWO_POWER_FIFTEEN (ushort)32768 -#define RioTime() riotime -#define RioTimeAfter(time1,time2) ((ushort)time1 - (ushort)time2) < TWO_POWER_FIFTEEN -#define RioTimePlus(time1,time2) ((ushort)time1 + (ushort)time2) - -/************************************** - * Convert a RIO tick (1/10th second) - * into transputer low priority ticks - *************************************/ -#define RioTimeToLow(time) (time*(100000 / 64)) -#define RioLowToTime(time) ((time*64)/100000) - -#define RIOTENTHSECOND (ushort)1 -#define RIOSECOND (ushort)(RIOTENTHSECOND * 10) -#endif - -/*********** end of file ***********/ diff --git a/drivers/char/rio/riotty.c b/drivers/char/rio/riotty.c index 5894a25b011..6379816ed17 100644 --- a/drivers/char/rio/riotty.c +++ b/drivers/char/rio/riotty.c @@ -89,16 +89,9 @@ static char *_riotty_c_sccs_ = "@(#)riotty.c 1.3"; #include "list.h" #include "sam.h" -#if 0 -static void ttyseth_pv(struct Port *, struct ttystatics *, struct termios *sg, int); -#endif - static void RIOClearUp(struct Port *PortP); int RIOShortCommand(struct rio_info *p, struct Port *PortP, int command, int len, int arg); -#if 0 -static int RIOCookMode(struct ttystatics *); -#endif extern int conv_vb[]; /* now defined in ttymgr.c */ extern int conv_bv[]; /* now defined in ttymgr.c */ @@ -226,33 +219,6 @@ int riotopen(struct tty_struct *tty, struct file *filp) ** until the RTA is present then we must spin here waiting for ** the RTA to boot. */ -#if 0 - if (!(PortP->HostP->Mapping[PortP->RupNum].Flags & RTA_BOOTED)) { - if (PortP->WaitUntilBooted) { - rio_dprintk(RIO_DEBUG_TTY, "Waiting for RTA to boot\n"); - do { - if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) { - rio_dprintk(RIO_DEBUG_TTY, "RTA EINTR in delay \n"); - func_exit(); - return -EINTR; - } - if (repeat_this-- <= 0) { - rio_dprintk(RIO_DEBUG_TTY, "Waiting for RTA to boot timeout\n"); - RIOPreemptiveCmd(p, PortP, FCLOSE); - pseterr(EINTR); - func_exit(); - return -EIO; - } - } while (!(PortP->HostP->Mapping[PortP->RupNum].Flags & RTA_BOOTED)); - rio_dprintk(RIO_DEBUG_TTY, "RTA has been booted\n"); - } else { - rio_dprintk(RIO_DEBUG_TTY, "RTA never booted\n"); - pseterr(ENXIO); - func_exit(); - return 0; - } - } -#else /* I find the above code a bit hairy. I find the below code easier to read and shorter. Now, if it works too that would be great... -- REW @@ -281,21 +247,10 @@ int riotopen(struct tty_struct *tty, struct file *filp) } } rio_dprintk(RIO_DEBUG_TTY, "RTA has been booted\n"); -#endif -#if 0 - tp = PortP->TtyP; /* get tty struct */ -#endif rio_spin_lock_irqsave(&PortP->portSem, flags); if (p->RIOHalted) { goto bombout; } -#if 0 - retval = gs_init_port(&PortP->gs); - if (retval) { - func_exit(); - return retval; - } -#endif /* ** If the port is in the final throws of being closed, @@ -363,11 +318,6 @@ int riotopen(struct tty_struct *tty, struct file *filp) command piggybacks the parameters immediately. -- REW */ RIOParam(PortP, OPEN, Modem, OK_TO_SLEEP); /* Open the port */ -#if 0 - /* This delay of 1 second was annoying. I removed it. -- REW */ - RIODelay(PortP, HUNDRED_MS * 10); - RIOParam(PortP, CONFIG, Modem, OK_TO_SLEEP); /* Config the port */ -#endif rio_spin_lock_irqsave(&PortP->portSem, flags); /* @@ -439,9 +389,6 @@ int riotopen(struct tty_struct *tty, struct file *filp) PortP->State |= RIO_WOPEN; rio_spin_unlock_irqrestore(&PortP->portSem, flags); if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) -#if 0 - if (sleep((caddr_t) & tp->tm.c_canqo, TTIPRI | PCATCH)) -#endif { /* ** ACTION: verify that this is a good thing @@ -505,10 +452,6 @@ int riotopen(struct tty_struct *tty, struct file *filp) */ int riotclose(void *ptr) { -#if 0 - register uint SysPort = dev; - struct ttystatics *tp; /* pointer to our ttystruct */ -#endif struct Port *PortP = ptr; /* pointer to the port structure */ int deleted = 0; int try = -1; /* Disable the timeouts by setting them to -1 */ @@ -534,13 +477,6 @@ int riotclose(void *ptr) end_time = jiffies + MAX_SCHEDULE_TIMEOUT; Modem = rio_ismodem(tty); -#if 0 - /* What F.CKING cache? Even then, a higly idle multiprocessor, - system with large caches this won't work . Better find out when - this doesn't work asap, and fix the cause. -- REW */ - - RIODelay(PortP, HUNDRED_MS * 10); /* To flush the cache */ -#endif rio_spin_lock_irqsave(&PortP->portSem, flags); /* @@ -703,45 +639,6 @@ int riotclose(void *ptr) } -/* -** decide if we need to use the line discipline. -** This routine can return one of three values: -** COOK_RAW if no processing has to be done by the line discipline or the card -** COOK_WELL if the line discipline must be used to do the processing -** COOK_MEDIUM if the card can do all the processing necessary. -*/ -#if 0 -static int RIOCookMode(struct ttystatics *tp) -{ - /* - ** We can't handle tm.c_mstate != 0 on SCO - ** We can't handle mapping - ** We can't handle non-ttwrite line disc. - ** We can't handle lflag XCASE - ** We can handle oflag OPOST & (OCRNL, ONLCR, TAB3) - */ - -#ifdef CHECK - CheckTtyP(tp); -#endif - if (!(tp->tm.c_oflag & OPOST)) /* No post processing */ - return COOK_RAW; /* Raw mode o/p */ - - if (tp->tm.c_lflag & XCASE) - return COOK_WELL; /* Use line disc */ - - if (tp->tm.c_oflag & ~(OPOST | ONLCR | OCRNL | TAB3)) - return COOK_WELL; /* Use line disc for strange modes */ - - if (tp->tm.c_oflag == OPOST) /* If only OPOST is set, do RAW */ - return COOK_RAW; - - /* - ** So, we need to output process! - */ - return COOK_MEDIUM; -} -#endif static void RIOClearUp(PortP) struct Port *PortP; @@ -776,11 +673,6 @@ int RIOShortCommand(struct rio_info *p, struct Port *PortP, int command, int len unsigned long flags; rio_dprintk(RIO_DEBUG_TTY, "entering shortcommand.\n"); -#ifdef CHECK - CheckPortP(PortP); - if (len < 1 || len > 2) - cprintf(("STUPID LENGTH %d\n", len)); -#endif if (PortP->State & RIO_DELETED) { rio_dprintk(RIO_DEBUG_TTY, "Short command to deleted RTA ignored\n"); @@ -852,478 +744,3 @@ int RIOShortCommand(struct rio_info *p, struct Port *PortP, int command, int len } -#if 0 -/* -** This is an ioctl interface. This is the twentieth century. You know what -** its all about. -*/ -int riotioctl(struct rio_info *p, struct tty_struct *tty, int cmd, caddr_t arg) -{ - register struct Port *PortP; - register struct ttystatics *tp; - int current; - int ParamSemIncremented = 0; - int old_oflag, old_cflag, old_iflag, changed, oldcook; - int i; - unsigned char sio_regs[5]; /* Here be magic */ - short vpix_cflag; - short divisor; - int baud; - uint SysPort = rio_minor(tty); - int Modem = rio_ismodem(tty); - int ioctl_processed; - - rio_dprintk(RIO_DEBUG_TTY, "port ioctl SysPort %d command 0x%x argument 0x%x %s\n", SysPort, cmd, arg, Modem ? "Modem" : "tty"); - - if (SysPort >= RIO_PORTS) { - rio_dprintk(RIO_DEBUG_TTY, "Bad port number %d\n", SysPort); - return -ENXIO; - } - - PortP = p->RIOPortp[SysPort]; - tp = PortP->TtyP; - - rio_spin_lock_irqsave(&PortP->portSem, flags); - -#ifdef STATS - PortP->Stat.IoctlCnt++; -#endif - - if (PortP->State & RIO_DELETED) { - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return -EIO; - } - - - if (p->RIOHalted) { - RIOClearUp(PortP); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return -EIO; - } - - /* - ** Count ioctls for port statistics reporting - */ - if (PortP->statsGather) - PortP->ioctls++; - - /* - ** Specialix RIO Ioctl calls - */ - switch (cmd) { - - case TCRIOTRIAD: - if (arg) - PortP->State |= RIO_TRIAD_MODE; - else - PortP->State &= ~RIO_TRIAD_MODE; - /* - ** Normally, when istrip is set on a port, a config is - ** sent to the RTA instructing the CD1400 to do the - ** stripping. In TRIAD mode, the interrupt receive routine - ** must do the stripping instead, since it has to detect - ** an 8 bit function key sequence. If istrip is set with - ** TRIAD mode on(off), and 8 bit data is being read by - ** the port, the user then turns TRIAD mode off(on), the RTA - ** must be reconfigured (not) to do the stripping. - ** Hence we call RIOParam here. - */ - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - RIOParam(PortP, CONFIG, Modem, OK_TO_SLEEP); - return 0; - - case TCRIOTSTATE: - rio_dprintk(RIO_DEBUG_TTY, "tbusy/tstop monitoring %sabled\n", arg ? "en" : "dis"); - /* MonitorTstate = 0 ; */ - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - RIOParam(PortP, CONFIG, Modem, OK_TO_SLEEP); - return 0; - - case TCRIOSTATE: /* current state of Modem input pins */ - rio_dprintk(RIO_DEBUG_TTY, "TCRIOSTATE\n"); - if (RIOPreemptiveCmd(p, PortP, MGET) == RIO_FAIL) - rio_dprintk(RIO_DEBUG_TTY, "TCRIOSTATE command failed\n"); - PortP->State |= RIO_BUSY; - current = PortP->ModemState; - if (copyout((caddr_t) & current, (int) arg, sizeof(current)) == COPYFAIL) { - rio_dprintk(RIO_DEBUG_TTY, "Copyout failed\n"); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - pseterr(EFAULT); - } - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return 0; - - case TCRIOMBIS: /* Set modem lines */ - case TCRIOMBIC: /* Clear modem lines */ - rio_dprintk(RIO_DEBUG_TTY, "TCRIOMBIS/TCRIOMBIC\n"); - if (cmd == TCRIOMBIS) { - uint state; - state = (uint) arg; - PortP->ModemState |= (ushort) state; - PortP->ModemLines = (ulong) arg; - if (RIOPreemptiveCmd(p, PortP, MBIS) == RIO_FAIL) - rio_dprintk(RIO_DEBUG_TTY, "TCRIOMBIS command failed\n"); - } else { - uint state; - - state = (uint) arg; - PortP->ModemState &= ~(ushort) state; - PortP->ModemLines = (ulong) arg; - if (RIOPreemptiveCmd(p, PortP, MBIC) == RIO_FAIL) - rio_dprintk(RIO_DEBUG_TTY, "TCRIOMBIC command failed\n"); - } - PortP->State |= RIO_BUSY; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return 0; - - case TCRIOXPON: /* set Xprint ON string */ - rio_dprintk(RIO_DEBUG_TTY, "TCRIOXPON\n"); - if (copyin((int) arg, (caddr_t) PortP->Xprint.XpOn, MAX_XP_CTRL_LEN) == COPYFAIL) { - rio_dprintk(RIO_DEBUG_TTY, "Copyin failed\n"); - PortP->Xprint.XpOn[0] = '\0'; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - pseterr(EFAULT); - } - PortP->Xprint.XpOn[MAX_XP_CTRL_LEN - 1] = '\0'; - PortP->Xprint.XpLen = strlen(PortP->Xprint.XpOn) + strlen(PortP->Xprint.XpOff); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return 0; - - case TCRIOXPOFF: /* set Xprint OFF string */ - rio_dprintk(RIO_DEBUG_TTY, "TCRIOXPOFF\n"); - if (copyin((int) arg, (caddr_t) PortP->Xprint.XpOff, MAX_XP_CTRL_LEN) == COPYFAIL) { - rio_dprintk(RIO_DEBUG_TTY, "Copyin failed\n"); - PortP->Xprint.XpOff[0] = '\0'; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - pseterr(EFAULT); - } - PortP->Xprint.XpOff[MAX_XP_CTRL_LEN - 1] = '\0'; - PortP->Xprint.XpLen = strlen(PortP->Xprint.XpOn) + strlen(PortP->Xprint.XpOff); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return 0; - - case TCRIOXPCPS: /* set Xprint CPS string */ - rio_dprintk(RIO_DEBUG_TTY, "TCRIOXPCPS\n"); - if ((uint) arg > p->RIOConf.MaxXpCps || (uint) arg < p->RIOConf.MinXpCps) { - rio_dprintk(RIO_DEBUG_TTY, "%d CPS out of range\n", arg); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - pseterr(EINVAL); - return 0; - } - PortP->Xprint.XpCps = (uint) arg; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return 0; - - case TCRIOXPRINT: - rio_dprintk(RIO_DEBUG_TTY, "TCRIOXPRINT\n"); - if (copyout((caddr_t) & PortP->Xprint, (int) arg, sizeof(struct Xprint)) == COPYFAIL) { - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - pseterr(EFAULT); - } - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return 0; - - case TCRIOIXANYON: - rio_dprintk(RIO_DEBUG_TTY, "TCRIOIXANYON\n"); - PortP->Config |= RIO_IXANY; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return 0; - - case TCRIOIXANYOFF: - rio_dprintk(RIO_DEBUG_TTY, "TCRIOIXANYOFF\n"); - PortP->Config &= ~RIO_IXANY; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return 0; - - case TCRIOIXONON: - rio_dprintk(RIO_DEBUG_TTY, "TCRIOIXONON\n"); - PortP->Config |= RIO_IXON; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return 0; - - case TCRIOIXONOFF: - rio_dprintk(RIO_DEBUG_TTY, "TCRIOIXONOFF\n"); - PortP->Config &= ~RIO_IXON; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return 0; - -/* -** 15.10.1998 ARG - ESIL 0761 part fix -** Added support for CTS and RTS flow control ioctls : -*/ - case TCRIOCTSFLOWEN: - rio_dprintk(RIO_DEBUG_TTY, "TCRIOCTSFLOWEN\n"); - PortP->Config |= RIO_CTSFLOW; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - RIOParam(PortP, CONFIG, Modem, OK_TO_SLEEP); - return 0; - - case TCRIOCTSFLOWDIS: - rio_dprintk(RIO_DEBUG_TTY, "TCRIOCTSFLOWDIS\n"); - PortP->Config &= ~RIO_CTSFLOW; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - RIOParam(PortP, CONFIG, Modem, OK_TO_SLEEP); - return 0; - - case TCRIORTSFLOWEN: - rio_dprintk(RIO_DEBUG_TTY, "TCRIORTSFLOWEN\n"); - PortP->Config |= RIO_RTSFLOW; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - RIOParam(PortP, CONFIG, Modem, OK_TO_SLEEP); - return 0; - - case TCRIORTSFLOWDIS: - rio_dprintk(RIO_DEBUG_TTY, "TCRIORTSFLOWDIS\n"); - PortP->Config &= ~RIO_RTSFLOW; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - RIOParam(PortP, CONFIG, Modem, OK_TO_SLEEP); - return 0; - -/* end ESIL 0761 part fix */ - - } - - - /* Lynx IOCTLS */ - switch (cmd) { - case TIOCSETP: - case TIOCSETN: - case OTIOCSETP: - case OTIOCSETN: - ioctl_processed++; - ttyseth(PortP, tp, (struct old_sgttyb *) arg); - break; - case TCSETA: - case TCSETAW: - case TCSETAF: - ioctl_processed++; - rio_dprintk(RIO_DEBUG_TTY, "NON POSIX ioctl\n"); - ttyseth_pv(PortP, tp, (struct termios *) arg, 0); - break; - case TCSETAP: /* posix tcsetattr() */ - case TCSETAWP: /* posix tcsetattr() */ - case TCSETAFP: /* posix tcsetattr() */ - rio_dprintk(RIO_DEBUG_TTY, "NON POSIX SYSV ioctl\n"); - ttyseth_pv(PortP, tp, (struct termios *) arg, 1); - ioctl_processed++; - break; - } - - /* - ** If its any of the commands that require the port to be in the - ** non-busy state wait until all output has drained - */ - if (!ioctl_processed) - switch (cmd) { - case TCSETAW: - case TCSETAF: - case TCSETA: - case TCSBRK: -#define OLD_POSIX ('x' << 8) -#define OLD_POSIX_SETA (OLD_POSIX | 2) -#define OLD_POSIX_SETAW (OLD_POSIX | 3) -#define OLD_POSIX_SETAF (OLD_POSIX | 4) -#define NEW_POSIX (('i' << 24) | ('X' << 16)) -#define NEW_POSIX_SETA (NEW_POSIX | 2) -#define NEW_POSIX_SETAW (NEW_POSIX | 3) -#define NEW_POSIX_SETAF (NEW_POSIX | 4) - case OLD_POSIX_SETA: - case OLD_POSIX_SETAW: - case OLD_POSIX_SETAF: - case NEW_POSIX_SETA: - case NEW_POSIX_SETAW: - case NEW_POSIX_SETAF: -#ifdef TIOCSETP - case TIOCSETP: -#endif - case TIOCSETD: - case TIOCSETN: - rio_dprintk(RIO_DEBUG_TTY, "wait for non-BUSY, semaphore set\n"); - /* - ** Wait for drain here, at least as far as the double buffer - ** being empty. - */ - /* XXX Does the above comment mean that this has - still to be implemented? -- REW */ - /* XXX Is the locking OK together with locking - in txenable? (Deadlock?) -- REW */ - - RIOTxEnable((char *) PortP); - break; - default: - break; - } - - old_cflag = tp->tm.c_cflag; - old_iflag = tp->tm.c_iflag; - old_oflag = tp->tm.c_oflag; - oldcook = PortP->CookMode; - - if (p->RIOHalted) { - RIOClearUp(PortP); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - pseterr(EIO); - return 0; - } - - PortP->FlushCmdBodge = 0; - - /* - ** If the port is locked, and it is reconfigured, we want - ** to restore the state of the tty structure so the change is NOT - ** made. - */ - if (PortP->Lock) { - tp->tm.c_iflag = PortP->StoredTty.iflag; - tp->tm.c_oflag = PortP->StoredTty.oflag; - tp->tm.c_cflag = PortP->StoredTty.cflag; - tp->tm.c_lflag = PortP->StoredTty.lflag; - tp->tm.c_line = PortP->StoredTty.line; - for (i = 0; i < NCC + 1; i++) - tp->tm.c_cc[i] = PortP->StoredTty.cc[i]; - } else { - /* - ** If the port is set to store the parameters, and it is - ** reconfigured, we want to save the current tty struct so it - ** may be restored on the next open. - */ - if (PortP->Store) { - PortP->StoredTty.iflag = tp->tm.c_iflag; - PortP->StoredTty.oflag = tp->tm.c_oflag; - PortP->StoredTty.cflag = tp->tm.c_cflag; - PortP->StoredTty.lflag = tp->tm.c_lflag; - PortP->StoredTty.line = tp->tm.c_line; - for (i = 0; i < NCC + 1; i++) - PortP->StoredTty.cc[i] = tp->tm.c_cc[i]; - } - } - - changed = (tp->tm.c_cflag != old_cflag) || (tp->tm.c_iflag != old_iflag) || (tp->tm.c_oflag != old_oflag); - - PortP->CookMode = RIOCookMode(tp); /* Set new cooking mode */ - - rio_dprintk(RIO_DEBUG_TTY, "RIOIoctl changed %d newcook %d oldcook %d\n", changed, PortP->CookMode, oldcook); - -#ifdef MODEM_SUPPORT - /* - ** kludge to force CARR_ON if CLOCAL set - */ - if ((tp->tm.c_cflag & CLOCAL) || (PortP->ModemState & MSVR1_CD)) { - tp->tm.c_state |= CARR_ON; - wakeup((caddr_t) & tp->tm.c_canq); - } -#endif - - if (p->RIOHalted) { - RIOClearUp(PortP); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - pseterr(EIO); - return 0; - } - /* - ** Re-configure if modes or cooking have changed - */ - if (changed || oldcook != PortP->CookMode || (ioctl_processed)) { - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - rio_dprintk(RIO_DEBUG_TTY, "Ioctl changing the PORT settings\n"); - RIOParam(PortP, CONFIG, Modem, OK_TO_SLEEP); - rio_spin_lock_irqsave(&PortP->portSem, flags); - } - - if (p->RIOHalted) { - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - RIOClearUp(PortP); - pseterr(EIO); - return 0; - } - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - return 0; -} - -/* - ttyseth -- set hardware dependent tty settings -*/ -void ttyseth(PortP, s, sg) -struct Port *PortP; -struct ttystatics *s; -struct old_sgttyb *sg; -{ - struct old_sgttyb *tsg; - struct termios *tp = &s->tm; - - tsg = &s->sg; - - if (sg->sg_flags & (EVENP | ODDP)) { - tp->c_cflag &= PARENB; - if (sg->sg_flags & EVENP) { - if (sg->sg_flags & ODDP) { - tp->c_cflag &= V_CS7; - tp->c_cflag &= ~PARENB; - } else { - tp->c_cflag &= V_CS7; - tp->c_cflag &= PARENB; - tp->c_cflag &= PARODD; - } - } else if (sg->sg_flags & ODDP) { - tp->c_cflag &= V_CS7; - tp->c_cflag &= PARENB; - tp->c_cflag &= PARODD; - } else { - tp->c_cflag &= V_CS7; - tp->c_cflag &= PARENB; - } - } -/* - * Use ispeed as the desired speed. Most implementations don't handle - * separate input and output speeds very well. If the RIO handles this, - * I will have to use separate sets of flags to store them in the - * Port structure. - */ - if (!sg->sg_ospeed) - sg->sg_ospeed = sg->sg_ispeed; - else - sg->sg_ispeed = sg->sg_ospeed; - if (sg->sg_ispeed > V_EXTB) - sg->sg_ispeed = V_EXTB; - if (sg->sg_ispeed < V_B0) - sg->sg_ispeed = V_B0; - *tsg = *sg; - tp->c_cflag = (tp->c_cflag & ~V_CBAUD) | conv_bv[(int) sg->sg_ispeed]; -} - -/* - ttyseth_pv -- set hardware dependent tty settings using either the - POSIX termios structure or the System V termio structure. - sysv = 0 => (POSIX): struct termios *sg - sysv != 0 => (System V): struct termio *sg -*/ -static void ttyseth_pv(PortP, s, sg, sysv) -struct Port *PortP; -struct ttystatics *s; -struct termios *sg; -int sysv; -{ - int speed; - unsigned char csize; - unsigned char cread; - unsigned int lcr_flags; - int ps; - - if (sysv) { - /* sg points to a System V termio structure */ - csize = ((struct termio *) sg)->c_cflag & CSIZE; - cread = ((struct termio *) sg)->c_cflag & CREAD; - speed = conv_vb[((struct termio *) sg)->c_cflag & V_CBAUD]; - } else { - /* sg points to a POSIX termios structure */ - csize = sg->c_cflag & CSIZE; - cread = sg->c_cflag & CREAD; - speed = conv_vb[sg->c_cflag & V_CBAUD]; - } - if (s->sg.sg_ispeed != speed || s->sg.sg_ospeed != speed) { - s->sg.sg_ispeed = speed; - s->sg.sg_ospeed = speed; - s->tm.c_cflag = (s->tm.c_cflag & ~V_CBAUD) | conv_bv[(int) s->sg.sg_ispeed]; - } -} -#endif diff --git a/drivers/char/rio/riowinif.h b/drivers/char/rio/riowinif.h deleted file mode 100644 index f802d7593b8..00000000000 --- a/drivers/char/rio/riowinif.h +++ /dev/null @@ -1,1329 +0,0 @@ -/************************************************************************/ -/* */ -/* Title : RIO Shared Memory Window Inteface */ -/* */ -/* Author : N.P.Vassallo */ -/* */ -/* Creation : 7th June 1999 */ -/* */ -/* Version : 1.0.0 */ -/* */ -/* Copyright : (c) Specialix International Ltd. 1999 * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * */ -/* Description : Prototypes, structures and definitions */ -/* describing RIO host card shared memory */ -/* window interface structures: */ -/* PARMMAP */ -/* RUP */ -/* PHB */ -/* LPB */ -/* PKT */ -/* */ -/************************************************************************/ - -/* History... - -1.0.0 07/06/99 NPV Creation. (based on PARMMAP.H) - -*/ - -#ifndef _riowinif_h /* If RIOWINDIF.H not already defined */ -#define _riowinif_h 1 - -/***************************************************************************** -******************************** ********************************* -******************************** General ********************************* -******************************** ********************************* -*****************************************************************************/ - -#define TPNULL ((_u16)(0x8000)) - -/***************************************************************************** -******************************** ******************************** -******************************** PARM_MAP ******************************** -******************************** ******************************** -*****************************************************************************/ - -/* The PARM_MAP structure defines global values relating to the Host Card / RTA - and is the main structure from which all other structures are referenced. */ - -typedef struct _PARM_MAP { - _u16 phb_ptr; /* 0x00 Pointer to the PHB array */ - _u16 phb_num_ptr; /* 0x02 Ptr to Number of PHB's */ - _u16 free_list; /* 0x04 Free List pointer */ - _u16 free_list_end; /* 0x06 Free List End pointer */ - _u16 q_free_list_ptr; /* 0x08 Ptr to Q_BUF variable */ - _u16 unit_id_ptr; /* 0x0A Unit Id */ - _u16 link_str_ptr; /* 0x0C Link Structure Array */ - _u16 bootloader_1; /* 0x0E 1st Stage Boot Loader */ - _u16 bootloader_2; /* 0x10 2nd Stage Boot Loader */ - _u16 port_route_map_ptr; /* 0x12 Port Route Map */ - _u16 route_ptr; /* 0x14 Route Map */ - _u16 map_present; /* 0x16 Route Map present */ - _u16 pkt_num; /* 0x18 Total number of packets */ - _u16 q_num; /* 0x1A Total number of Q packets */ - _u16 buffers_per_port; /* 0x1C Number of buffers per port */ - _u16 heap_size; /* 0x1E Initial size of heap */ - _u16 heap_left; /* 0x20 Current Heap left */ - _u16 error; /* 0x22 Error code */ - _u16 tx_max; /* 0x24 Max number of tx pkts per phb */ - _u16 rx_max; /* 0x26 Max number of rx pkts per phb */ - _u16 rx_limit; /* 0x28 For high / low watermarks */ - _u16 links; /* 0x2A Links to use */ - _u16 timer; /* 0x2C Interrupts per second */ - _u16 rups; /* 0x2E Pointer to the RUPs */ - _u16 max_phb; /* 0x30 Mostly for debugging */ - _u16 living; /* 0x32 Just increments!! */ - _u16 init_done; /* 0x34 Initialisation over */ - _u16 booting_link; /* 0x36 */ - _u16 idle_count; /* 0x38 Idle time counter */ - _u16 busy_count; /* 0x3A Busy counter */ - _u16 idle_control; /* 0x3C Control Idle Process */ - _u16 tx_intr; /* 0x3E TX interrupt pending */ - _u16 rx_intr; /* 0x40 RX interrupt pending */ - _u16 rup_intr; /* 0x42 RUP interrupt pending */ - -} PARM_MAP; - -/* Same thing again, but defined as offsets... */ - -#define PM_phb_ptr 0x00 /* 0x00 Pointer to the PHB array */ -#define PM_phb_num_ptr 0x02 /* 0x02 Ptr to Number of PHB's */ -#define PM_free_list 0x04 /* 0x04 Free List pointer */ -#define PM_free_list_end 0x06 /* 0x06 Free List End pointer */ -#define PM_q_free_list_ptr 0x08 /* 0x08 Ptr to Q_BUF variable */ -#define PM_unit_id_ptr 0x0A /* 0x0A Unit Id */ -#define PM_link_str_ptr 0x0C /* 0x0C Link Structure Array */ -#define PM_bootloader_1 0x0E /* 0x0E 1st Stage Boot Loader */ -#define PM_bootloader_2 0x10 /* 0x10 2nd Stage Boot Loader */ -#define PM_port_route_map_ptr 0x12 /* 0x12 Port Route Map */ -#define PM_route_ptr 0x14 /* 0x14 Route Map */ -#define PM_map_present 0x16 /* 0x16 Route Map present */ -#define PM_pkt_num 0x18 /* 0x18 Total number of packets */ -#define PM_q_num 0x1A /* 0x1A Total number of Q packets */ -#define PM_buffers_per_port 0x1C /* 0x1C Number of buffers per port */ -#define PM_heap_size 0x1E /* 0x1E Initial size of heap */ -#define PM_heap_left 0x20 /* 0x20 Current Heap left */ -#define PM_error 0x22 /* 0x22 Error code */ -#define PM_tx_max 0x24 /* 0x24 Max number of tx pkts per phb */ -#define PM_rx_max 0x26 /* 0x26 Max number of rx pkts per phb */ -#define PM_rx_limit 0x28 /* 0x28 For high / low watermarks */ -#define PM_links 0x2A /* 0x2A Links to use */ -#define PM_timer 0x2C /* 0x2C Interrupts per second */ -#define PM_rups 0x2E /* 0x2E Pointer to the RUPs */ -#define PM_max_phb 0x30 /* 0x30 Mostly for debugging */ -#define PM_living 0x32 /* 0x32 Just increments!! */ -#define PM_init_done 0x34 /* 0x34 Initialisation over */ -#define PM_booting_link 0x36 /* 0x36 */ -#define PM_idle_count 0x38 /* 0x38 Idle time counter */ -#define PM_busy_count 0x3A /* 0x3A Busy counter */ -#define PM_idle_control 0x3C /* 0x3C Control Idle Process */ -#define PM_tx_intr 0x3E /* 0x4E TX interrupt pending */ -#define PM_rx_intr 0x40 /* 0x40 RX interrupt pending */ -#define PM_rup_intr 0x42 /* 0x42 RUP interrupt pending */ -#define sizeof_PARM_MAP 0x44 /* structure size = 0x44 */ - -/* PARM_MAP.error definitions... */ -#define E_NO_ERROR 0x00 -#define E_PROCESS_NOT_INIT 0x01 -#define E_LINK_TIMEOUT 0x02 -#define E_NO_ROUTE 0x03 -#define E_CONFUSED 0x04 -#define E_HOME 0x05 -#define E_CSUM_FAIL 0x06 -#define E_DISCONNECTED 0x07 -#define E_BAD_RUP 0x08 -#define E_NO_VIRGIN 0x09 -#define E_BOOT_RUP_BUSY 0x10 -#define E_CHANALLOC 0x80 -#define E_POLL_ALLOC 0x81 -#define E_LTTWAKE 0x82 -#define E_LTT_ALLOC 0x83 -#define E_LRT_ALLOC 0x84 -#define E_CIRRUS 0x85 -#define E_MONITOR 0x86 -#define E_PHB_ALLOC 0x87 -#define E_ARRAY_ALLOC 0x88 -#define E_QBUF_ALLOC 0x89 -#define E_PKT_ALLOC 0x8a -#define E_GET_TX_Q_BUF 0x8b -#define E_GET_RX_Q_BUF 0x8c -#define E_MEM_OUT 0x8d -#define E_MMU_INIT 0x8e -#define E_LTT_INIT 0x8f -#define E_LRT_INIT 0x90 -#define E_LINK_RUN 0x91 -#define E_MONITOR_ALLOC 0x92 -#define E_MONITOR_INIT 0x93 -#define E_POLL_INIT 0x94 - -/* PARM_MAP.links definitions... */ -#define RIO_LINK_ENABLE 0x80FF - -/***************************************************************************** -********************************** *********************************** -********************************** RUP *********************************** -********************************** *********************************** -*****************************************************************************/ - -/* The RUP (Remote Unit Port) structure relates to the Remote Terminal Adapters - attached to the system and there is normally an array of MAX_RUPS (=16) structures - in a host card, defined by PARM_MAP->rup. */ - -typedef struct _RUP { - _u16 txpkt; /* 0x00 Outgoing packet */ - _u16 rxpkt; /* 0x02 ncoming packet */ - _u16 link; /* 0x04 Which link to send packet down ? */ - _u8 rup_dest_unit[2]; /* 0x06 Destination Unit */ - _u16 handshake; /* 0x08 Handshaking */ - _u16 timeout; /* 0x0A Timeout */ - _u16 status; /* 0x0C Status */ - _u16 txcontrol; /* 0x0E Transmit control */ - _u16 rxcontrol; /* 0x10 Receive control */ - -} RUP; - -/* Same thing again, but defined as offsets... */ - -#define RUP_txpkt 0x00 /* 0x00 Outgoing packet */ -#define RUP_rxpkt 0x02 /* 0x02 Incoming packet */ -#define RUP_link 0x04 /* 0x04 Which link to send packet down ? */ -#define RUP_rup_dest_unit 0x06 /* 0x06 Destination Unit */ -#define RUP_handshake 0x08 /* 0x08 Handshaking */ -#define RUP_timeout 0x0A /* 0x0A Timeout */ -#define RUP_status 0x0C /* 0x0C Status */ -#define RUP_txcontrol 0x0E /* 0x0E Transmit control */ -#define RUP_rxcontrol 0x10 /* 0x10 Receive control */ -#define sizeof_RUP 0x12 /* structure size = 0x12 */ - -#define MAX_RUP 16 - -/* RUP.txcontrol definitions... */ -#define TX_RUP_INACTIVE 0 /* Nothing to transmit */ -#define TX_PACKET_READY 1 /* Transmit packet ready */ -#define TX_LOCK_RUP 2 /* Transmit side locked */ - -/* RUP.txcontrol definitions... */ -#define RX_RUP_INACTIVE 0 /* Nothing received */ -#define RX_PACKET_READY 1 /* Packet received */ - -#define RUP_NO_OWNER 0xFF /* RUP not owned by any process */ - -/***************************************************************************** -********************************** *********************************** -********************************** PHB *********************************** -********************************** *********************************** -*****************************************************************************/ - -/* The PHB (Port Header Block) structure relates to the serial ports attached - to the system and there is normally an array of MAX_PHBS (=128) structures - in a host card, defined by PARM_MAP->phb_ptr and PARM_MAP->phb_num_ptr. */ - -typedef struct _PHB { - _u16 source; /* 0x00 Location of the PHB in the host card */ - _u16 handshake; /* 0x02 Used to manage receive packet flow control */ - _u16 status; /* 0x04 Internal port transmit/receive status */ - _u16 timeout; /* 0x06 Time period to wait for an ACK */ - _u16 link; /* 0x08 The host link associated with the PHB */ - _u16 destination; /* 0x0A Location of the remote port on the network */ - - _u16 tx_start; /* 0x0C first entry in the packet array for transmit packets */ - _u16 tx_end; /* 0x0E last entry in the packet array for transmit packets */ - _u16 tx_add; /* 0x10 position in the packet array for new transmit packets */ - _u16 tx_remove; /* 0x12 current position in the packet pointer array */ - - _u16 rx_start; /* 0x14 first entry in the packet array for receive packets */ - _u16 rx_end; /* 0x16 last entry in the packet array for receive packets */ - _u16 rx_add; /* 0x18 position in the packet array for new receive packets */ - _u16 rx_remove; /* 0x1A current position in the packet pointer array */ - -} PHB; - -/* Same thing again, but defined as offsets... */ - -#define PHB_source 0x00 /* 0x00 Location of the PHB in the host card */ -#define PHB_handshake 0x02 /* 0x02 Used to manage receive packet flow control */ -#define PHB_status 0x04 /* 0x04 Internal port transmit/receive status */ -#define PHB_timeout 0x06 /* 0x06 Time period to wait for an ACK */ -#define PHB_link 0x08 /* 0x08 The host link associated with the PHB */ -#define PHB_destination 0x0A /* 0x0A Location of the remote port on the network */ -#define PHB_tx_start 0x0C /* 0x0C first entry in the packet array for transmit packets */ -#define PHB_tx_end 0x0E /* 0x0E last entry in the packet array for transmit packets */ -#define PHB_tx_add 0x10 /* 0x10 position in the packet array for new transmit packets */ -#define PHB_tx_remove 0x12 /* 0x12 current position in the packet pointer array */ -#define PHB_rx_start 0x14 /* 0x14 first entry in the packet array for receive packets */ -#define PHB_rx_end 0x16 /* 0x16 last entry in the packet array for receive packets */ -#define PHB_rx_add 0x18 /* 0x18 position in the packet array for new receive packets */ -#define PHB_rx_remove 0x1A /* 0x1A current position in the packet pointer array */ -#define sizeof_PHB 0x1C /* structure size = 0x1C */ - -/* PHB.handshake definitions... */ -#define PHB_HANDSHAKE_SET 0x0001 /* Set by LRT */ -#define PHB_HANDSHAKE_RESET 0x0002 /* Set by ISR / driver */ -#define PHB_HANDSHAKE_FLAGS (PHB_HANDSHAKE_RESET|PHB_HANDSHAKE_SET) - /* Reset by ltt */ - -#define MAX_PHB 128 /* range 0-127 */ - -/***************************************************************************** -********************************** *********************************** -********************************** LPB *********************************** -********************************** *********************************** -*****************************************************************************/ - -/* The LPB (Link Parameter Block) structure relates to a RIO Network Link - and there is normally an array of MAX_LINKS (=4) structures in a host card, - defined by PARM_MAP->link_str_ptr. */ - -typedef struct _LPB { - _u16 link_number; /* 0x00 Link Number */ - _u16 in_ch; /* 0x02 Link In Channel */ - _u16 out_ch; /* 0x04 Link Out Channel */ - _u8 attached_serial[4]; /* 0x06 Attached serial number */ - _u8 attached_host_serial[4]; /* 0x0A Serial number of Host who booted other end */ - _u16 descheduled; /* 0x0E Currently Descheduled */ - _u16 state; /* 0x10 Current state */ - _u16 send_poll; /* 0x12 Send a Poll Packet */ - _u16 ltt_p; /* 0x14 Process Descriptor */ - _u16 lrt_p; /* 0x16 Process Descriptor */ - _u16 lrt_status; /* 0x18 Current lrt status */ - _u16 ltt_status; /* 0x1A Current ltt status */ - _u16 timeout; /* 0x1C Timeout value */ - _u16 topology; /* 0x1E Topology bits */ - _u16 mon_ltt; /* 0x20 */ - _u16 mon_lrt; /* 0x22 */ - _u16 num_pkts; /* 0x24 */ - _u16 add_packet_list; /* 0x26 Add packets to here */ - _u16 remove_packet_list; /* 0x28 Send packets from here */ - - _u16 lrt_fail_chan; /* 0x2A Lrt's failure channel */ - _u16 ltt_fail_chan; /* 0x2C Ltt's failure channel */ - - RUP rup; /* 0x2E RUP structure for HOST to driver comms */ - RUP link_rup; /* 0x40 RUP for the link (POLL, topology etc.) */ - _u16 attached_link; /* 0x52 Number of attached link */ - _u16 csum_errors; /* 0x54 csum errors */ - _u16 num_disconnects; /* 0x56 number of disconnects */ - _u16 num_sync_rcvd; /* 0x58 # sync's received */ - _u16 num_sync_rqst; /* 0x5A # sync requests */ - _u16 num_tx; /* 0x5C Num pkts sent */ - _u16 num_rx; /* 0x5E Num pkts received */ - _u16 module_attached; /* 0x60 Module tpyes of attached */ - _u16 led_timeout; /* 0x62 LED timeout */ - _u16 first_port; /* 0x64 First port to service */ - _u16 last_port; /* 0x66 Last port to service */ - -} LPB; - -/* Same thing again, but defined as offsets... */ - -#define LPB_link_number 0x00 /* 0x00 Link Number */ -#define LPB_in_ch 0x02 /* 0x02 Link In Channel */ -#define LPB_out_ch 0x04 /* 0x04 Link Out Channel */ -#define LPB_attached_serial 0x06 /* 0x06 Attached serial number */ -#define LPB_attached_host_serial 0x0A /* 0x0A Serial number of Host who booted other end */ -#define LPB_descheduled 0x0E /* 0x0E Currently Descheduled */ -#define LPB_state 0x10 /* 0x10 Current state */ -#define LPB_send_poll 0x12 /* 0x12 Send a Poll Packet */ -#define LPB_ltt_p 0x14 /* 0x14 Process Descriptor */ -#define LPB_lrt_p 0x16 /* 0x16 Process Descriptor */ -#define LPB_lrt_status 0x18 /* 0x18 Current lrt status */ -#define LPB_ltt_status 0x1A /* 0x1A Current ltt status */ -#define LPB_timeout 0x1C /* 0x1C Timeout value */ -#define LPB_topology 0x1E /* 0x1E Topology bits */ -#define LPB_mon_ltt 0x20 /* 0x20 */ -#define LPB_mon_lrt 0x22 /* 0x22 */ -#define LPB_num_pkts 0x24 /* 0x24 */ -#define LPB_add_packet_list 0x26 /* 0x26 Add packets to here */ -#define LPB_remove_packet_list 0x28 /* 0x28 Send packets from here */ -#define LPB_lrt_fail_chan 0x2A /* 0x2A Lrt's failure channel */ -#define LPB_ltt_fail_chan 0x2C /* 0x2C Ltt's failure channel */ -#define LPB_rup 0x2E /* 0x2E RUP structure for HOST to driver comms */ -#define LPB_link_rup 0x40 /* 0x40 RUP for the link (POLL, topology etc.) */ -#define LPB_attached_link 0x52 /* 0x52 Number of attached link */ -#define LPB_csum_errors 0x54 /* 0x54 csum errors */ -#define LPB_num_disconnects 0x56 /* 0x56 number of disconnects */ -#define LPB_num_sync_rcvd 0x58 /* 0x58 # sync's received */ -#define LPB_num_sync_rqst 0x5A /* 0x5A # sync requests */ -#define LPB_num_tx 0x5C /* 0x5C Num pkts sent */ -#define LPB_num_rx 0x5E /* 0x5E Num pkts received */ -#define LPB_module_attached 0x60 /* 0x60 Module tpyes of attached */ -#define LPB_led_timeout 0x62 /* 0x62 LED timeout */ -#define LPB_first_port 0x64 /* 0x64 First port to service */ -#define LPB_last_port 0x66 /* 0x66 Last port to service */ -#define sizeof_LPB 0x68 /* structure size = 0x68 */ - -#define LINKS_PER_UNIT 4 /* number of links from a host */ - -/***************************************************************************** -******************************** ******************************* -******************************** FREE_LIST ******************************* -******************************** ******************************* -*****************************************************************************/ - -/* Used to overlay packet headers when allocating/freeing packets from the free list */ - -typedef struct _FREE_LIST { - _u16 next; /* 0x00 offset of next list item */ - _u16 prev; /* 0x02 offset of previous list item */ - -} FREE_LIST; - -/* Same thing again, but defined as offsets... */ - -#define FL_next 0x00 /* 0x00 offset of next list item */ -#define FL_prev 0x02 /* 0x02 offset of previous list item */ - -/***************************************************************************** -********************************** *********************************** -********************************** PKT *********************************** -********************************** *********************************** -*****************************************************************************/ - -/* The PKT is the main unit of communication between Host Cards and RTAs across - the RIO network. */ - -#define PKT_MAX_DATA_LEN 72 /* Size of packet data */ - -typedef struct _PKT { - _u8 dest_unit; /* 0x00 Destination Unit Id */ - _u8 dest_port; /* 0x01 Destination Port */ - _u8 src_unit; /* 0x02 Source Unit Id */ - _u8 src_port; /* 0x03 Source Port */ - _u8 len; /* 0x04 Length (in bytes) of data field */ - _u8 control; /* 0x05 */ - _u8 data[PKT_MAX_DATA_LEN]; /* 0x06 Actual data */ - _u16 csum; /* 0x4E C-SUM */ - -} PKT; - -/* Same thing again, but defined as offsets... */ - -#define PKT_dest_unit 0x00 /* 0x00 Destination Unit Id */ -#define PKT_dest_port 0x01 /* 0x01 Destination Port */ -#define PKT_src_unit 0x02 /* 0x02 Source Unit Id */ -#define PKT_src_port 0x03 /* 0x03 Source Port */ -#define PKT_len 0x04 /* 0x04 Length (in bytes) of data field */ -#define PKT_control 0x05 /* 0x05 */ -#define PKT_data 0x06 /* 0x06 Actual data */ -#define PKT_csum 0x4E /* 0x4E C-SUM */ -#define sizeof_PKT 0x50 /* structure size = 0x50 */ - -/* PKT.len definitions... */ -#define PKT_CMD_BIT 0x80 -#define PKT_CMD_DATA 0x80 -#define PKT_LEN_MASK 0x7F - -/* PKT.control definitions... */ -#define PKT_ACK 0x40 -#define PKT_TGL 0x20 -#define DATA_WNDW 0x10 -#define PKT_TTL_MASK 0x0F -#define MAX_TTL 0x0F - -/***************************************************************************** -***************************** **************************** -***************************** Control Packets **************************** -***************************** **************************** -*****************************************************************************/ - -/* The following definitions and structures define the control packets sent - between the driver and RIO Ports, RTAs and Host Cards. */ - -#define PRE_EMPTIVE 0x80 /* Pre-emptive command (sent via port's RUP) */ - -/* "in-band" and "pre-emptive" port commands... */ -#define OPEN 0x00 /* Driver->RIO Open a port */ -#define CONFIG 0x01 /* Driver->RIO Configure a port */ -#define MOPEN 0x02 /* Driver->RIO Modem open (wait for DCD) */ -#define CLOSE 0x03 /* Driver->RIO Close a port */ -#define WFLUSH (0x04|PRE_EMPTIVE) /* Driver->RIO Write flush */ -#define RFLUSH (0x05|PRE_EMPTIVE) /* Driver->RIO Read flush */ -#define RESUME (0x06|PRE_EMPTIVE) /* Driver->RIO Behave as if XON received */ -#define SBREAK 0x07 /* Driver->RIO Start break */ -#define EBREAK 0x08 /* Driver->RIO End break */ -#define SUSPEND (0x09|PRE_EMPTIVE) /* Driver->RIO Behave as if XOFF received */ -#define FCLOSE (0x0A|PRE_EMPTIVE) /* Driver->RIO Force close */ -#define XPRINT 0x0B /* Driver->RIO Xprint packet */ -#define MBIS (0x0C|PRE_EMPTIVE) /* Driver->RIO Set modem lines */ -#define MBIC (0x0D|PRE_EMPTIVE) /* Driver->RIO Clear modem lines */ -#define MSET (0x0E|PRE_EMPTIVE) /* Driver->RIO Set modem lines */ -#define PCLOSE 0x0F /* Driver->RIO Pseudo close */ -#define MGET (0x10|PRE_EMPTIVE) /* Driver->RIO Force update of modem status */ -#define MEMDUMP (0x11|PRE_EMPTIVE) /* Driver->RIO DEBUG request for RTA memory */ -#define READ_REGISTER (0x12|PRE_EMPTIVE) /* Driver->RIO DEBUG read CD1400 register */ - -/* Remote Unit Port (RUP) packet definitions... (specified in PKT.dest_unit and PKT.src_unit) */ -#define SYNC_RUP 0xFF /* Download internal */ -#define COMMAND_RUP 0xFE /* Command ack/status */ -#define ERROR_RUP 0xFD /* Download internal */ -#define POLL_RUP 0xFC /* Download internal */ -#define BOOT_RUP 0xFB /* Used to boot RTAs */ -#define ROUTE_RUP 0xFA /* Used to specify routing/topology */ -#define STATUS_RUP 0xF9 /* Not used */ -#define POWER_RUP 0xF8 /* Download internal */ - -/* COMMAND_RUP definitions... */ -#define COMPLETE (0x20|PRE_EMPTIVE) /* RIO->Driver Command complete */ -#define BREAK_RECEIVED (0x21|PRE_EMPTIVE) /* RIO->Driver Break received */ -#define MODEM_STATUS (0x22|PRE_EMPTIVE) /* RIO->Driver Modem status change */ - -/* BOOT_RUP definitions... */ -#define BOOT_REQUEST 0x00 /* RIO->Driver Request for boot */ -#define BOOT_ABORT 0x01 /* Driver->RIO Abort a boot */ -#define BOOT_SEQUENCE 0x02 /* Driver->RIO Packet with firmware details */ -#define BOOT_COMPLETED 0x03 /* RIO->Driver Boot completed */ -#define IFOAD 0x2F /* Driver->RIO Shutdown/Reboot RTA (Fall Over And Die) */ -#define IDENTIFY 0x30 /* Driver->RIO Identify RTA */ -#define ZOMBIE 0x31 /* Driver->RIO Shutdown/Flash LEDs */ -#define UFOAD 0x32 /* Driver->RIO Shutdown/Reboot neighbouring RTA */ -#define IWAIT 0x33 /* Driver->RIO Pause booting process */ - -/* ROUTE_RUP definitions... */ -#define ROUTE_REQUEST 0x00 /* RIO->Driver Request an ID */ -#define ROUTE_FOAD 0x01 /* Driver->RIO Shutdown/reboot RTA */ -#define ROUTE_ALREADY 0x02 /* Driver->RIO Not used */ -#define ROUTE_USED 0x03 /* Driver->RIO Not used */ -#define ROUTE_ALLOCATE 0x04 /* Driver->RIO Allocate RTA RUP numbers */ -#define ROUTE_REQ_TOP 0x05 /* Driver->RIO Not used */ -#define ROUTE_TOPOLOGY 0x06 /* RIO->Driver Route/Topology status */ - -/***************************************************************************** -********************************** ********************************** -********************************** OPEN ********************************** -********************************** ********************************** -*****************************************************************************/ - -/* (Driver->RIO,in-band) - - Sent to open a port. - Structure of configuration info used with OPEN, CONFIG and MOPEN packets... */ - -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_Cor1 (PKT_Data+1) /* Channel Option Register 1 */ -#define PKT_Cor2 (PKT_Data+2) /* Channel Option Register 2 */ -#define PKT_Cor4 (PKT_Data+3) /* Channel Option Register 4 */ -#define PKT_Cor5 (PKT_Data+4) /* Channel Option Register 5 */ -#define PKT_TxXon (PKT_Data+5) /* Transmit XON character */ -#define PKT_TxXoff (PKT_Data+6) /* Transmit XOFF character */ -#define PKT_RxXon (PKT_Data+7) /* Receive XON character */ -#define PKT_RxXoff (PKT_Data+8) /* Receive XOFF character */ -#define PKT_Lnext (PKT_Data+9) /* Lnext character */ -#define PKT_TxBaud (PKT_Data+10) /* Transmit baud rate */ -#define PKT_RxBaud (PKT_Data+11) /* Receive baud rate */ - -/* COR1 definitions... */ -#define COR1_PARITY 0xE0 /* Parity mask */ -#define COR1_NONE 0x00 /* No parity */ -#define COR1_SPACE 0x20 /* Space parity */ -#define COR1_EVEN 0x40 /* Even parity */ -#define COR1_MARK 0xA0 /* Mark parity */ -#define COR1_ODD 0xC0 /* Odd parity */ - -#define COR1_STOPBITS 0x0C /* Stop bits mask */ -#define COR1_STOP1 0x00 /* 1 stop bit */ -#define COR1_STOP1_5 0x04 /* 1.5 stop bits */ -#define COR1_STOP2 0x08 /* 2 stop bits */ - -#define COR1_DATABITS 0x03 /* Data bits mask */ -#define COR1_DATA5 0x00 /* 5 data bits */ -#define COR1_DATA6 0x01 /* 6 data bits */ -#define COR1_DATA7 0x02 /* 7 data bits */ -#define COR1_DATA8 0x03 /* 8 data bits */ - -/* COR2 definitions... */ -#define COR2_XON_TXFLOW 0x40 /* XON/XOFF Transmit Flow */ -#define COR2_XANY_TXFLOW 0xC0 /* XON/XANY Transmit Flow */ -#define COR2_HUPCL 0x20 /* Hang Up On Close */ -#define COR2_DSR_TXFLOW 0x08 /* DSR Transmit Flow Control */ -#define COR2_RTS_RXFLOW 0x04 /* RTS Receive Flow Control */ -#define COR2_CTS_TXFLOW 0x02 /* CTS Transmit Flow Control */ -#define COR2_XON_RXFLOW 0x01 /* XON/XOFF Receive Flow */ - -/* COR4 definition... */ -#define COR4_IGNCR 0x80 /* Discard received CR */ -#define COR4_ICRNL 0x40 /* Map received CR -> NL */ -#define COR4_INLCR 0x20 /* Map received NL -> CR */ -#define COR4_IGNBRK 0x10 /* Ignore Received Break */ -#define COR4_NBRKINT 0x08 /* No interrupt on rx Break */ -#define COR4_IGNPAR 0x04 /* ignore rx parity error chars */ -#define COR4_PARMRK 0x02 /* Mark rx parity error chars */ -#define COR4_RAISEMOD 0x01 /* Raise modem lines on !0 baud */ - -/* COR5 definitions... */ -#define COR5_ISTRIP 0x80 /* Strip input chars to 7 bits */ -#define COR5_LNE 0x40 /* Enable LNEXT processing */ -#define COR5_CMOE 0x20 /* Match good & error characters */ -#define COR5_TAB3 0x10 /* TAB3 mode */ -#define COR5_TSTATE_ON 0x08 /* Enable tbusy/tstop monitoring */ -#define COR5_TSTATE_OFF 0x04 /* Disable tbusy/tstop monitoring */ -#define COR5_ONLCR 0x02 /* NL -> CR NL on output */ -#define COR5_OCRNL 0x01 /* CR -> NL on output */ - -/* RxBaud and TxBaud definitions... */ -#define RIO_B0 0x00 /* RTS / DTR signals dropped */ -#define RIO_B50 0x01 /* 50 baud */ -#define RIO_B75 0x02 /* 75 baud */ -#define RIO_B110 0x03 /* 110 baud */ -#define RIO_B134 0x04 /* 134.5 baud */ -#define RIO_B150 0x05 /* 150 baud */ -#define RIO_B200 0x06 /* 200 baud */ -#define RIO_B300 0x07 /* 300 baud */ -#define RIO_B600 0x08 /* 600 baud */ -#define RIO_B1200 0x09 /* 1200 baud */ -#define RIO_B1800 0x0A /* 1800 baud */ -#define RIO_B2400 0x0B /* 2400 baud */ -#define RIO_B4800 0x0C /* 4800 baud */ -#define RIO_B9600 0x0D /* 9600 baud */ -#define RIO_B19200 0x0E /* 19200 baud */ -#define RIO_B38400 0x0F /* 38400 baud */ -#define RIO_B56000 0x10 /* 56000 baud */ -#define RIO_B57600 0x11 /* 57600 baud */ -#define RIO_B64000 0x12 /* 64000 baud */ -#define RIO_B115200 0x13 /* 115200 baud */ -#define RIO_B2000 0x14 /* 2000 baud */ - -/***************************************************************************** -********************************* ********************************* -********************************* CONFIG ********************************* -********************************* ********************************* -*****************************************************************************/ - -/* (Driver->RIO,in-band) - - CONFIG is sent from the driver to configure an already opened port. - Packet structure is same as OPEN. */ - -/***************************************************************************** -********************************* ********************************** -********************************* MOPEN ********************************** -********************************* ********************************** -*****************************************************************************/ - -/* (Driver->RIO,in-band) - - MOPEN is sent from the driver to open a port attached to a modem. (in-band) - Packet structure is same as OPEN. */ - -/***************************************************************************** -********************************* ********************************** -********************************* CLOSE ********************************** -********************************* ********************************** -*****************************************************************************/ - -/* (Driver->RIO,in-band) - - CLOSE is sent from the driver to close a previously opened port. - No parameters. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif -/***************************************************************************** -********************************* ********************************* -********************************* WFLUSH ********************************* -********************************* ********************************* -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - WFLUSH is sent pre-emptively from the driver to flush the write buffers and - packets of a port. (pre-emptive) - - WFLUSH is also sent in-band from the driver to a port as a marker to end - write flushing previously started by a pre-emptive WFLUSH packet. (in-band) - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ - -/***************************************************************************** -********************************* ********************************* -********************************* RFLUSH ********************************* -********************************* ********************************* -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - RFLUSH is sent pre-emptively from the driver to flush the read buffers and - packets of a port. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ -#endif - -/***************************************************************************** -********************************* ********************************* -********************************* RESUME ********************************* -********************************* ********************************* -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - RESUME is sent pre-emptively from the driver to cause a port to resume - transmission of data if blocked by XOFF. (as if XON had been received) - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ -#endif - -/***************************************************************************** -********************************* ********************************* -********************************* SBREAK ********************************* -********************************* ********************************* -*****************************************************************************/ - -/* (Driver->RIO,in-band) - - SBREAK is sent in-band from the driver to a port to suspend data and start - break signal transmission. - - If the break delay is 0, the break signal will be acknowledged with a - RUP_COMMAND, COMPLETE packet and continue until an EBREAK packet is received. - - Otherwise, there is no acknowledgement and the break signal will last for the - specified number of mS. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif -#define PKT_BreakDelay (PKT_Data+1) /* Break delay in mS */ - -/***************************************************************************** -********************************* ********************************* -********************************* EBREAK ********************************* -********************************* ********************************* -*****************************************************************************/ - -/* (Driver->RIO,in-band) - - EBREAK is sent in-band from the driver to a port to stop transmission of a - break signal. - - No parameters. */ - -/***************************************************************************** -********************************* ******************************** -********************************* SUSPEND ******************************** -********************************* ******************************** -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - SUSPEND is sent pre-emptively from the driver to cause a port to suspend - transmission of data. (as if XOFF had been received) - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ -#endif - -/***************************************************************************** -********************************* ********************************* -********************************* FCLOSE ********************************* -********************************* ********************************* -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - FCLOSE is sent pre-emptively from the driver to force close a port. - A force close flushes receive and transmit queues, and also lowers all output - modem signals if the COR5_HUPCL (Hang Up On Close) flag is set. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ -#endif - -/***************************************************************************** -********************************* ********************************* -********************************* XPRINT ********************************* -********************************* ********************************* -*****************************************************************************/ - -/* (Driver->RIO,in-band) - - XPRINT is sent as a normal I/O data packet except that the PKT_CMD_BIT of - the "len" field is set, and the first "data" byte is XPRINT. - - The I/O data in the XPRINT packet will contain the following: - - Transparent Print Start Sequence - - Transparent Print Data - - Transparent Print Stop Sequence. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ -#endif - -/***************************************************************************** -********************************** ********************************** -********************************** MBIS ********************************** -********************************** ********************************** -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - MBIS is sent pre-emptively from the driver to set a port's modem signals. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ -#endif -#define PKT_ModemSet (PKT_Data+4) /* Modem set signals mask */ - -/* ModemSet definitions... */ -#define MBIS_RTS 0x01 /* RTS modem signal */ -#define MBIS_DTR 0x02 /* DTR modem signal */ - -/***************************************************************************** -********************************** ********************************** -********************************** MBIC ********************************** -********************************** ********************************** -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - MBIC is sent pre-emptively from the driver to clear a port's modem signals. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ -#endif - -#define PKT_ModemClear (PKT_Data+4) /* Modem clear signals mask */ - -/* ModemClear definitions... */ -#define MBIC_RTS 0x01 /* RTS modem signal */ -#define MBIC_DTR 0x02 /* DTR modem signal */ - -/***************************************************************************** -********************************** ********************************** -********************************** MSET ********************************** -********************************** ********************************** -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - MSET is sent pre-emptively from the driver to set/clear a port's modem signals. */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ -#endif - -#define PKT_ModemSet (PKT_Data+4) /* Modem set signals mask */ - -/* ModemSet definitions... */ -#define MSET_RTS 0x01 /* RTS modem signal */ -#define MSET_DTR 0x02 /* DTR modem signal */ - -/***************************************************************************** -********************************* ********************************* -********************************* PCLOSE ********************************* -********************************* ********************************* -*****************************************************************************/ - -/* (Driver->RIO,in-band) - - PCLOSE is sent from the driver to pseudo close a previously opened port. - - The port will close when all data has been sent/received, however, the - port's transmit / receive and modem signals will be left enabled and the - port marked internally as Pseudo Closed. */ - -#define PKT_Cmd (PKT_Data+0) /* Command code */ - -/***************************************************************************** -********************************** ********************************** -********************************** MGET ********************************** -********************************** ********************************** -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - MGET is sent pre-emptively from the driver to request the port's current modem signals. */ - -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ - -/***************************************************************************** -********************************* ******************************** -********************************* MEMDUMP ******************************** -********************************* ******************************** -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - MEMDUMP is sent pre-emptively from the driver to request a dump of 32 bytes - of the specified port's RTA address space. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ -#define PKT_SubCmd (PKT_Data+5) /* Sub Command */ -#define PKT_Address (PKT_Data+6) /* Requested address */ - -/***************************************************************************** -****************************** ***************************** -****************************** READ_REGISTER ***************************** -****************************** ***************************** -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - READ_REGISTER is sent pre-emptively from the driver to request the contents - of the CD1400 register specified in address. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ -#define PKT_SubCmd (PKT_Data+5) /* Sub Command */ -#define PKT_Address (PKT_Data+6) /* Requested address */ - -/***************************************************************************** -************************ ************************** -************************ COMMAND_RUP - COMPLETE ************************** -************************ ************************** -*****************************************************************************/ - -/* (RIO->Driver,pre-emptive) - - COMMAND_RUP - COMPLETE is sent in response to all port I/O control command - packets, except MEMDUMP and READ_REGISTER. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ -#define PKT_Cmd2 (PKT_Data+2) /* Command code copy */ -#define PKT_ModemStatus (PKT_Data+3) /* Modem signal status */ -#define PKT_PortStatus (PKT_Data+4) /* Port signal status */ -#define PKT_SubCmd (PKT_Data+5) /* Sub Command */ - -/* ModemStatus definitions... */ -#define MODEM_DSR 0x80 /* Data Set Ready modem state */ -#define MODEM_CTS 0x40 /* Clear To Send modem state */ -#define MODEM_RI 0x20 /* Ring Indicate modem state */ -#define MODEM_CD 0x10 /* Carrier Detect modem state */ -#define MODEM_TSTOP 0x08 /* Transmit Stopped state */ -#define MODEM_TEMPTY 0x04 /* Transmit Empty state */ -#define MODEM_DTR 0x02 /* DTR modem output state */ -#define MODEM_RTS 0x01 /* RTS modem output state */ - -/* PortStatus definitions... */ -#define PORT_ISOPEN 0x01 /* Port open ? */ -#define PORT_HUPCL 0x02 /* Hangup on close? */ -#define PORT_MOPENPEND 0x04 /* Modem open pending */ -#define PORT_ISPARALLEL 0x08 /* Parallel port */ -#define PORT_BREAK 0x10 /* Port on break */ -#define PORT_STATUSPEND 0020 /* Status packet pending */ -#define PORT_BREAKPEND 0x40 /* Break packet pending */ -#define PORT_MODEMPEND 0x80 /* Modem status packet pending */ - -/***************************************************************************** -************************ ************************** -************************ COMMAND_RUP - COMPLETE ************************** -************************ ************************** -*****************************************************************************/ - -/* (RIO->Driver,pre-emptive) - - COMMAND_RUP - COMPLETE is sent in response to all port I/O control command - packets, except MEMDUMP and READ_REGISTER. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ -#define PKT_Cmd2 (PKT_Data+2) /* Command code copy */ -#endif -#define PKT_ModemStatus (PKT_Data+3) /* Modem signal status */ -#define PKT_PortStatus (PKT_Data+4) /* Port signal status */ -#if 0 -#define PKT_SubCmd (PKT_Data+5) /* Sub Command */ -#endif - -/* ModemStatus definitions... */ -#define MODEM_DSR 0x80 /* Data Set Ready modem state */ -#define MODEM_CTS 0x40 /* Clear To Send modem state */ -#define MODEM_RI 0x20 /* Ring Indicate modem state */ -#define MODEM_CD 0x10 /* Carrier Detect modem state */ -#define MODEM_TSTOP 0x08 /* Transmit Stopped state */ -#define MODEM_TEMPTY 0x04 /* Transmit Empty state */ -#define MODEM_DTR 0x02 /* DTR modem output state */ -#define MODEM_RTS 0x01 /* RTS modem output state */ - -/* PortStatus definitions... */ -#define PORT_ISOPEN 0x01 /* Port open ? */ -#define PORT_HUPCL 0x02 /* Hangup on close? */ -#define PORT_MOPENPEND 0x04 /* Modem open pending */ -#define PORT_ISPARALLEL 0x08 /* Parallel port */ -#define PORT_BREAK 0x10 /* Port on break */ -#define PORT_STATUSPEND 0020 /* Status packet pending */ -#define PORT_BREAKPEND 0x40 /* Break packet pending */ -#define PORT_MODEMPEND 0x80 /* Modem status packet pending */ - -/***************************************************************************** -******************** ******************** -******************** COMMAND_RUP - COMPLETE - MEMDUMP ******************** -******************** ******************** -*****************************************************************************/ - -/* (RIO->Driver,pre-emptive) - - COMMAND_RUP - COMPLETE - MEMDUMP is sent as an acknowledgement for a MEMDUMP - port I/O control command packet. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ -#define PKT_Cmd2 (PKT_Data+2) /* Command code copy */ -#define PKT_ModemStatus (PKT_Data+3) /* Modem signal status */ -#define PKT_PortStatus (PKT_Data+4) /* Port signal status */ -#define PKT_SubCmd (PKT_Data+5) /* Sub Command */ -#define PKT_Address (PKT_Data+6) /* Requested address */ -#endif -#define PKT_Dump (PKT_Data+8) /* 32bytes of requested dump data */ - -/***************************************************************************** -***************** ***************** -***************** COMMAND_RUP - COMPLETE - READ_REGISTER ***************** -***************** ***************** -*****************************************************************************/ - -/* (RIO->Driver,pre-emptive) - - COMMAND_RUP - COMPLETE - READ_REGISTER is sent as an acknowledgement for a - READ_REGISTER port I/O control command packet. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /*Command code */ -#define PKT_PhbNum (PKT_Data+1) /*Port number wrt RTA */ -#define PKT_Cmd2 (PKT_Data+2) /* Command code copy */ -#endif -#define PKT_RegisterValue (PKT_Data+3) /* Modem signal status */ -#if 0 -#define PKT_PortStatus (PKT_Data+4) /* Port signal status */ -#define PKT_SubCmd (PKT_Data+5) /* Sub Command */ -#endif - -/***************************************************************************** -********************* *********************** -********************* COMMAND_RUP - BREAK_RECEIVED *********************** -********************* *********************** -*****************************************************************************/ - -/* (RIO->Driver,pre-emptive) - - COMMAND_RUP - BREAK_RECEIVED packets are sent when the port detects a receive BREAK signal. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ -#define PKT_Cmd2 (PKT_Data+2) /* Command code copy */ -#endif - -/***************************************************************************** -********************* ************************* -********************* COMMAND_RUP - MODEM_STATUS ************************* -********************* ************************* -*****************************************************************************/ - -/* (RIO->Driver,pre-emptive) - - COMMAND_RUP - MODEM_STATUS packets are sent whenever the port detects a - change in the input modem signal states. - - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ -#define PKT_Cmd2 (PKT_Data+2) /* Command code copy */ -#define PKT_ModemStatus (PKT_Data+3) /* Modem signal status */ -#endif - -/***************************************************************************** -************************ ************************* -************************ BOOT_RUP - BOOT_REQUEST ************************* -************************ ************************* -*****************************************************************************/ - -/* (RIO->Driver,pre-emptive) - - BOOT_RUP - BOOT_REQUEST packets are sent to the Driver from RIO to request - firmware code to load onto attached RTAs. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif - -/***************************************************************************** -************************ ************************ -************************ BOOT_RUP - BOOT_SEQUENCE ************************ -************************ ************************ -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - BOOT_RUP - BOOT_SEQUENCE packets are sent from the Driver to RIO in response - to a BOOT_RUP - BOOT_REQUEST packet. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif -#define PKT_NumPackets (PKT_Data+2) /* Packets required to load firmware */ -#define PKT_LoadBase (PKT_Data+4) /* RTA firmware load address */ -#define PKT_CodeSize (PKT_Data+6) /* Size of firmware in bytes */ -#define PKT_CmdString (PKT_Data+8) /* Command string */ - -/***************************************************************************** -************************ *********************** -************************ BOOT_RUP - BOOT_COMPLETED *********************** -************************ *********************** -*****************************************************************************/ - -/* (RIO->Driver,pre-emptive) - - BOOT_RUP - BOOT_COMPLETE is sent to the Driver from RIO when downloading of - RTA firmware has completed. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif -#define PKT_LinkNumber (PKT_Data+1) /* Link number RTA booted on */ -#define PKT_SerialNumber (PKT_Data+2) /* 4 byte serial number */ - -/***************************************************************************** -************************ *********************** -************************ BOOT_RUP - Packet Request *********************** -************************ *********************** -*****************************************************************************/ - -/* (RIO->Driver,pre-emptive) - - BOOT_RUP packet without the PKT_CMD_BIT set in the PKT->len field is sent - from RIO to the Driver as a request for a firmware boot packet. */ - -#define PKT_SequenceNumber (PKT_Data+0) /* Packet sequence number */ - -/***************************************************************************** -*********************** *********************** -*********************** BOOT_RUP - Packet Response *********************** -*********************** *********************** -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - In response to a BOOT_RUP boot packet request, the driver fills out the response - packet with the 70 bytes of the requested sequence. - */ -#if 0 -#define PKT_SequenceNumber (PKT_Data+0) /* Packet sequence number */ -#endif -#define PKT_FirmwarePacket (PKT_Data+2) /* Firmware packet */ - -/***************************************************************************** -**************************** **************************** -**************************** BOOT_RUP - IFOAD **************************** -**************************** **************************** -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - BOOT_RUP - IFOAD packets are sent from the Driver to an RTA to cause the - RTA to shut down and reboot. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif -#define PKT_IfoadId1 (PKT_Data+2) /* IFOAD Id 1 */ -#define PKT_IfoadId2 (PKT_Data+3) /* IFOAD Id 2 */ - -#define IFOADID1 0xAD -#define IFOADID2 0xF0 - -/***************************************************************************** -************************** *************************** -************************** BOOT_RUP - IDENTIFY *************************** -************************** *************************** -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - BOOT_RUP - IDENTIFY packets are sent from the Driver to an RTA to cause the - RTA to flash its LEDs for a period of time. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif -#define PKT_IdentifyId (PKT_Data+2) /* defines pattern to flash */ - -/***************************************************************************** -**************************** *************************** -**************************** BOOT_RUP - ZOMBIE *************************** -**************************** *************************** -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - BOOT_RUP - ZOMBIE packets are sent from the Driver to an RTA to cause the - RTA to shut down and flash it's LEDs. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif -#define PKT_ZombieId1 (PKT_Data+2) /* ZOMBIE Id 1 */ -#define PKT_ZombieId2 (PKT_Data+3) /* ZOMBIE Id 2 */ - -#define ZOMBIEID1 0x52 -#define ZOMBIEID2 0x21 - -/***************************************************************************** -**************************** **************************** -**************************** BOOT_RUP - UFOAD **************************** -**************************** **************************** -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - BOOT_RUP - UFOAD packets are sent from the Driver to an RTA to cause the RTA - to ask it's neighbouring RTA to shut down and reboot. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_LinkNumber (PKT_Data+1) /* Link number of RTA to UFOAD */ -#endif -#define PKT_UfoadId1 (PKT_Data+2) /* UFOAD Id 1 */ -#define PKT_UfoadId2 (PKT_Data+3) /* UFOAD Id 2 */ - -#define UFOADID1 0x1E -#define UFOADID2 0x0D - -/***************************************************************************** -**************************** **************************** -**************************** BOOT_RUP - IWAIT **************************** -**************************** **************************** -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - BOOT_RUP - IWAIT packets are sent from the Driver to an RTA to cause the RTA - to pause booting on the specified link for 30 seconds. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_LinkNumber (PKT_Data+1) /* Link number of RTA to UFOAD */ -#endif -#define PKT_IwaitId1 (PKT_Data+2) /* IWAIT Id 1 */ -#define PKT_IwaitId2 (PKT_Data+3) /* IWAIT Id 2 */ - -#define IWAITID1 0xDE -#define IWAITID2 0xB1 - -/***************************************************************************** -************************ *********************** -************************ ROUTE_RUP - ROUTE_REQUEST *********************** -************************ *********************** -*****************************************************************************/ - -/* (RIO->Driver,pre-emptive) - - ROUTE_RUP - ROUTE_REQUEST packets are sent from a newly booted or connected - RTA to a Driver to request an ID (RUP or unit number). - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif -#define PKT_SerialNumber (PKT_Data+2) /* 4 byte serial number */ -#define PKT_ModuleTypes (PKT_Data+6) /* RTA Module types */ - -/* ModuleTypes definitions... */ -#define MOD_BLANK 0x0F /* Blank plate attached */ -#define MOD_RS232DB25 0x00 /* RS232 DB25 connector */ -#define MOD_RS232RJ45 0x01 /* RS232 RJ45 connector */ -#define MOD_RS422DB25 0x02 /* RS422 DB25 connector */ -#define MOD_RS485DB25 0x03 /* RS485 DB25 connector */ -#define MOD_PARALLEL 0x04 /* Centronics parallel */ - -#define MOD2 0x08 /* Set to indicate Rev2 module */ - -/***************************************************************************** -************************* ************************* -************************* ROUTE_RUP - ROUTE_FOAD ************************* -************************* ************************* -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - ROUTE_RUP - ROUTE_FOAD packet is sent as a response to a ROUTE_RUP - ROUTE_REQUEST - packet to cause the RTA to "Fall Over And Die"., i.e. shutdown and reboot. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif -#define PKT_RouteCmdString (PKT_Data+2) /* Command string */ - -/***************************************************************************** -*********************** *********************** -*********************** ROUTE_RUP - ROUTE_ALLOCATE *********************** -*********************** *********************** -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - ROUTE_RUP - ROUTE_ALLOCATE packet is sent as a response to a ROUTE_RUP - ROUTE_REQUEST - packet to allocate the RTA's Id number (RUP number 1..16) - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif -#define PKT_IdNum (PKT_Data+1) /* RUP number for ports 1..8 */ -#if 0 -#define PKT_RouteCmdString (PKT_Data+2) /* Command string */ -#endif -#define PKT_IdNum2 (PKT_Data+0x17) /* RUP number for ports 9..16 */ - -/***************************************************************************** -*********************** *********************** -*********************** ROUTE_RUP - ROUTE_TOPOLOGY *********************** -*********************** *********************** -*****************************************************************************/ - -/* (RIO->Driver,pre-emptive) - - ROUTE_RUP - ROUTE_TOPOLOGY packet is sent to inform the driver of an RTA's - current link status. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif -#define PKT_Link1Rup (PKT_Data+2) /* Link 1 RUP number */ -#define PKT_Link1Link (PKT_Data+3) /* Link 1 link number */ -#define PKT_Link2Rup (PKT_Data+4) /* Link 2 RUP number */ -#define PKT_Link2Link (PKT_Data+5) /* Link 2 link number */ -#define PKT_Link3Rup (PKT_Data+6) /* Link 3 RUP number */ -#define PKT_Link3Link (PKT_Data+7) /* Link 3 link number */ -#define PKT_Link4Rup (PKT_Data+8) /* Link 4 RUP number */ -#define PKT_Link4Link (PKT_Data+9) /* Link 4 link number */ -#define PKT_RtaVpdProm (PKT_Data+10) /* 32 bytes of RTA VPD PROM Contents */ - -#endif /* _sxwinif_h */ - -/* End of RIOWINIF.H */ diff --git a/drivers/char/rio/riscos.h b/drivers/char/rio/riscos.h deleted file mode 100644 index 60d66d0056a..00000000000 --- a/drivers/char/rio/riscos.h +++ /dev/null @@ -1,63 +0,0 @@ -/* -** ----------------------------------------------------------------------------- -** -** Perle Specialix driver for Linux -** Ported from existing RIO Driver for SCO sources. - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -** Module : riscos.h -** SID : 1.2 -** Last Modified : 11/6/98 11:34:19 -** Retrieved : 11/6/98 11:34:22 -** -** ident @(#)riscos.h 1.2 -** -** ----------------------------------------------------------------------------- -*/ - -#ifndef __rio_riscos_h__ -#define __rio_riscos_h__ - -#ifdef SCCS_LABELS -static char *_riscos_h_sccs_ = "@(#)riscos.h 1.2"; -#endif - -/* -** This module used to define all those little itsy bits required for RISC/OS -** now it's full of null macros. -*/ - -/* -** RBYTE reads a byte from a location. -** RWORD reads a word from a location. -** WBYTE writes a byte to a location. -** WWORD writes a word to a location. -** RINDW reads a word through a pointer. -** WINDW writes a word through a pointer. -** RIOSWAB swaps the two bytes of a word, if needed. -*/ - -#define RIOSWAB(N) (N) -#define WBYTE(A,V) (A)=(uchar)(V) -#define WWORD(A,V) (A)=(ushort)(V) -#define RBYTE(A) (uchar)(A) -#define RWORD(A) (ushort)(A) -#define RINDW(A) (*(ushort *)(A)) -#define WINDW(A,V) (*(ushort *)(A)=(ushort)(V)) - -#endif /* __rio_riscos_h__ */ diff --git a/drivers/char/rio/rtahw.h b/drivers/char/rio/rtahw.h deleted file mode 100644 index e6c2cdfd3a1..00000000000 --- a/drivers/char/rio/rtahw.h +++ /dev/null @@ -1,75 +0,0 @@ - -/**************************************************************************** - ******* ******* - ******* R T A H A R D W A R E - ******* ******* - **************************************************************************** - - Author : Ian Nandhra - Date : - - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Version : 0.01 - - - Mods - ---------------------------------------------------------------------------- - Date By Description - ---------------------------------------------------------------------------- - - ***************************************************************************/ - -#ifndef lint -#ifdef SCCS_LABELS -static char *_rio_rtahw_h_sccs = "@(#)rtahw.h 1.5"; -#endif -#endif - -#define WATCHDOG_ADDR ((unsigned short *)0x7a00) -#define RTA_LED_ADDR ((unsigned short *)0x7c00) -#define SERIALNUM_ADDR ((unsigned char *)0x7809) -#define LATCH_ADDR ((unsigned char *)0x7800) - -/* -** Here we define where the cd1400 chips are in memory. -*/ -#define CD1400_ONE_ADDR (0x7300) -#define CD1400_TWO_ADDR (0x7200) -#define CD1400_THREE_ADDR (0x7100) -#define CD1400_FOUR_ADDR (0x7000) - -/* -** Define the different types of modules we can have -*/ -enum module { - MOD_BLANK = 0x0f, /* Blank plate attached */ - MOD_RS232DB25 = 0x00, /* RS232 DB25 connector */ - MOD_RS232RJ45 = 0x01, /* RS232 RJ45 connector */ - MOD_RS422DB25 = 0x02, /* RS422 DB25 connector */ - MOD_RS485DB25 = 0x03, /* RS485 DB25 connector */ - MOD_PARALLEL = 0x04 /* Centronics parallel */ -}; - -#define TYPE_HOST 0 -#define TYPE_RTA8 1 -#define TYPE_RTA16 2 - -#define WATCH_DOG WATCHDOG_ADDR - -/*********** end of file ***********/ diff --git a/drivers/char/rio/rupstat.h b/drivers/char/rio/rupstat.h deleted file mode 100644 index 56d828c63d2..00000000000 --- a/drivers/char/rio/rupstat.h +++ /dev/null @@ -1,50 +0,0 @@ -/**************************************************************************** - ******* ******* - ******* RUPSTAT - ******* ******* - **************************************************************************** - - Author : Jeremy Rolls - Date : - - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Version : 0.01 - - - Mods - ---------------------------------------------------------------------------- - Date By Description - ---------------------------------------------------------------------------- - - ***************************************************************************/ - -#ifndef _rupstat_h -#define _rupstat_h - -#ifndef lint -#ifdef SCCS_LABELS -static char *_rio_rupstat_h_sccs = "@(#)rupstat.h 1.1"; -#endif -#endif - -#define STATUS_SYNC 0 -#define STATUS_REQ_TOP 1 -#define STATUS_TOPOLOGY 2 - -#endif diff --git a/drivers/char/rio/selftest.h b/drivers/char/rio/selftest.h deleted file mode 100644 index 7a3dba35232..00000000000 --- a/drivers/char/rio/selftest.h +++ /dev/null @@ -1,73 +0,0 @@ -/* -** File: selftest.h -** -** Author: David Dix -** -** Created: 15th March 1993 -** -** Last modified: 94/06/14 -** - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#ifndef _selftests_h_ -#define _selftests_h_ - -/* -** Selftest identifier... -*/ -#define SELFTEST_MAGIC 0x5a5a - -/* -** This is the structure of the packet that is sent back after each -** selftest on a booting RTA. -*/ -typedef struct { - short magic; /* Identifies packet type */ - int test; /* Test number, see below */ - unsigned int result; /* Result value */ - unsigned int dataIn; - unsigned int dataOut; -} selftestStruct; - -/* -** The different tests are identified by the following data values. -*/ -enum test { - TESTS_COMPLETE = 0x00, - MEMTEST_ADDR = 0x01, - MEMTEST_BIT = 0x02, - MEMTEST_FILL = 0x03, - MEMTEST_DATABUS = 0x04, - MEMTEST_ADDRBUS = 0x05, - CD1400_INIT = 0x10, - CD1400_LOOP = 0x11, - CD1400_INTERRUPT = 0x12 -}; - -enum result { - E_PORT = 0x10, - E_TX = 0x11, - E_RX = 0x12, - E_EXCEPT = 0x13, - E_COMPARE = 0x14, - E_MODEM = 0x15, - E_TIMEOUT = 0x16, - E_INTERRUPT = 0x17 -}; -#endif /* _selftests_h_ */ diff --git a/drivers/char/rio/sysmap.h b/drivers/char/rio/sysmap.h deleted file mode 100644 index e1c6f1160df..00000000000 --- a/drivers/char/rio/sysmap.h +++ /dev/null @@ -1,62 +0,0 @@ - -/**************************************************************************** - ******* ******* - ******* S Y S T E M M A P H E A D E R - ******* ******* - **************************************************************************** - - Author : Ian Nandhra - Date : - - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Version : 0.01 - - - Mods - ---------------------------------------------------------------------------- - Date By Description - ---------------------------------------------------------------------------- - - ***************************************************************************/ - -#ifndef lint -#ifdef SCCS_LABELS -static char *_rio_sysmap_h_sccs = "@(#)sysmap.h 1.1"; -#endif -#endif - -#define SYSTEM_MAP_LEN 64 /* Len of System Map array */ - - -typedef struct SYS_MAP SYS_MAP; -typedef struct SYS_MAP_LINK SYS_MAP_LINK; - -struct SYS_MAP_LINK { - short id; /* Unit Id */ - short link; /* Id's Link */ - short been_here; /* Used by map_gen */ -}; - -struct SYS_MAP { - char serial_num[4]; - SYS_MAP_LINK link[4]; -}; - - -/*********** end of file ***********/ diff --git a/drivers/char/rio/timeouts.h b/drivers/char/rio/timeouts.h deleted file mode 100644 index a8b5be3ca9b..00000000000 --- a/drivers/char/rio/timeouts.h +++ /dev/null @@ -1,50 +0,0 @@ - -/**************************************************************************** - ******* ******* - ******* T I M E O U T S - ******* ******* - **************************************************************************** - - Author : Ian Nandhra - Date : - - * - * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Version : 0.01 - - - Mods - ---------------------------------------------------------------------------- - Date By Description - ---------------------------------------------------------------------------- - - ***************************************************************************/ - -#ifndef lint -#ifdef SCCS_LABELS -static char *_rio_defaults_h_sccs = "@(#)timeouts.h 1.3"; -#endif -#endif - -#define MILLISECOND (int) (1000/64) /* 15.625 low ticks */ -#define SECOND (int) 15625 /* Low priority ticks */ - -#define TX_TIMEOUT (int) (200 * MILLISECOND) - - -/*********** end of file ***********/ diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c index 050e70ee592..119e629656b 100644 --- a/drivers/char/riscom8.c +++ b/drivers/char/riscom8.c @@ -82,7 +82,6 @@ static struct riscom_board * IRQ_to_board[16]; static struct tty_driver *riscom_driver; static unsigned char * tmp_buf; -static DECLARE_MUTEX(tmp_buf_sem); static unsigned long baud_table[] = { 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c index f36342ae8e7..037c940ac71 100644 --- a/drivers/char/serial167.c +++ b/drivers/char/serial167.c @@ -129,7 +129,6 @@ struct cyclades_port cy_port[] = { * memory if large numbers of serial ports are open. */ static unsigned char *tmp_buf = 0; -DECLARE_MUTEX(tmp_buf_sem); /* * This is used to look up the divisor speeds and the timeouts diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c index 0a574bdbce3..5343e9fc6ab 100644 --- a/drivers/char/specialix.c +++ b/drivers/char/specialix.c @@ -184,7 +184,6 @@ static int sx_poll = HZ; static struct tty_driver *specialix_driver; static unsigned char * tmp_buf; -static DECLARE_MUTEX(tmp_buf_sem); static unsigned long baud_table[] = { 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, @@ -2556,8 +2555,6 @@ static int __init specialix_init_module(void) func_enter(); - init_MUTEX(&tmp_buf_sem); /* Init de the semaphore - pvdl */ - if (iobase[0] || iobase[1] || iobase[2] || iobase[3]) { for(i = 0; i < SX_NBOARD; i++) { sx_board[i].base = iobase[i]; diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c index 0e20780d4a2..bdaab699210 100644 --- a/drivers/char/stallion.c +++ b/drivers/char/stallion.c @@ -738,7 +738,7 @@ static int __init stallion_module_init(void) stl_init(); restore_flags(flags); - return(0); + return 0; } /*****************************************************************************/ @@ -889,7 +889,7 @@ static unsigned long stl_atol(char *str) } val = (val * base) + c; } - return(val); + return val; } /*****************************************************************************/ @@ -908,7 +908,7 @@ static int stl_parsebrd(stlconf_t *confp, char **argp) #endif if ((argp[0] == (char *) NULL) || (*argp[0] == 0)) - return(0); + return 0; for (sp = argp[0], i = 0; ((*sp != 0) && (i < 25)); sp++, i++) *sp = TOLOWER(*sp); @@ -935,7 +935,7 @@ static int stl_parsebrd(stlconf_t *confp, char **argp) } if ((argp[i] != (char *) NULL) && (*argp[i] != 0)) confp->irq = stl_atol(argp[i]); - return(1); + return 1; } /*****************************************************************************/ @@ -946,7 +946,7 @@ static int stl_parsebrd(stlconf_t *confp, char **argp) static void *stl_memalloc(int len) { - return((void *) kmalloc(len, GFP_KERNEL)); + return (void *) kmalloc(len, GFP_KERNEL); } /*****************************************************************************/ @@ -963,12 +963,12 @@ static stlbrd_t *stl_allocbrd(void) if (brdp == (stlbrd_t *) NULL) { printk("STALLION: failed to allocate memory (size=%d)\n", sizeof(stlbrd_t)); - return((stlbrd_t *) NULL); + return (stlbrd_t *) NULL; } memset(brdp, 0, sizeof(stlbrd_t)); brdp->magic = STL_BOARDMAGIC; - return(brdp); + return brdp; } /*****************************************************************************/ @@ -988,10 +988,10 @@ static int stl_open(struct tty_struct *tty, struct file *filp) minordev = tty->index; brdnr = MINOR2BRD(minordev); if (brdnr >= stl_nrbrds) - return(-ENODEV); + return -ENODEV; brdp = stl_brds[brdnr]; if (brdp == (stlbrd_t *) NULL) - return(-ENODEV); + return -ENODEV; minordev = MINOR2PORT(minordev); for (portnr = -1, panelnr = 0; (panelnr < STL_MAXPANELS); panelnr++) { if (brdp->panels[panelnr] == (stlpanel_t *) NULL) @@ -1003,11 +1003,11 @@ static int stl_open(struct tty_struct *tty, struct file *filp) minordev -= brdp->panels[panelnr]->nrports; } if (portnr < 0) - return(-ENODEV); + return -ENODEV; portp = brdp->panels[panelnr]->ports[portnr]; if (portp == (stlport_t *) NULL) - return(-ENODEV); + return -ENODEV; /* * On the first open of the device setup the port hardware, and @@ -1021,7 +1021,7 @@ static int stl_open(struct tty_struct *tty, struct file *filp) if (portp->tx.buf == (char *) NULL) { portp->tx.buf = (char *) stl_memalloc(STL_TXBUFSIZE); if (portp->tx.buf == (char *) NULL) - return(-ENOMEM); + return -ENOMEM; portp->tx.head = portp->tx.buf; portp->tx.tail = portp->tx.buf; } @@ -1043,8 +1043,8 @@ static int stl_open(struct tty_struct *tty, struct file *filp) if (portp->flags & ASYNC_CLOSING) { interruptible_sleep_on(&portp->close_wait); if (portp->flags & ASYNC_HUP_NOTIFY) - return(-EAGAIN); - return(-ERESTARTSYS); + return -EAGAIN; + return -ERESTARTSYS; } /* @@ -1054,11 +1054,11 @@ static int stl_open(struct tty_struct *tty, struct file *filp) */ if (!(filp->f_flags & O_NONBLOCK)) { if ((rc = stl_waitcarrier(portp, filp)) != 0) - return(rc); + return rc; } portp->flags |= ASYNC_NORMAL_ACTIVE; - return(0); + return 0; } /*****************************************************************************/ @@ -1115,7 +1115,7 @@ static int stl_waitcarrier(stlport_t *portp, struct file *filp) portp->openwaitcnt--; restore_flags(flags); - return(rc); + return rc; } /*****************************************************************************/ @@ -1211,12 +1211,12 @@ static int stl_write(struct tty_struct *tty, const unsigned char *buf, int count if ((tty == (struct tty_struct *) NULL) || (stl_tmpwritebuf == (char *) NULL)) - return(0); + return 0; portp = tty->driver_data; if (portp == (stlport_t *) NULL) - return(0); + return 0; if (portp->tx.buf == (char *) NULL) - return(0); + return 0; /* * If copying direct from user space we must cater for page faults, @@ -1255,7 +1255,7 @@ static int stl_write(struct tty_struct *tty, const unsigned char *buf, int count clear_bit(ASYI_TXLOW, &portp->istate); stl_startrxtx(portp, -1, 1); - return(count); + return count; } /*****************************************************************************/ @@ -1336,16 +1336,16 @@ static int stl_writeroom(struct tty_struct *tty) #endif if (tty == (struct tty_struct *) NULL) - return(0); + return 0; portp = tty->driver_data; if (portp == (stlport_t *) NULL) - return(0); + return 0; if (portp->tx.buf == (char *) NULL) - return(0); + return 0; head = portp->tx.head; tail = portp->tx.tail; - return((head >= tail) ? (STL_TXBUFSIZE - (head - tail) - 1) : (tail - head - 1)); + return ((head >= tail) ? (STL_TXBUFSIZE - (head - tail) - 1) : (tail - head - 1)); } /*****************************************************************************/ @@ -1370,19 +1370,19 @@ static int stl_charsinbuffer(struct tty_struct *tty) #endif if (tty == (struct tty_struct *) NULL) - return(0); + return 0; portp = tty->driver_data; if (portp == (stlport_t *) NULL) - return(0); + return 0; if (portp->tx.buf == (char *) NULL) - return(0); + return 0; head = portp->tx.head; tail = portp->tx.tail; size = (head >= tail) ? (head - tail) : (STL_TXBUFSIZE - (tail - head)); if ((size == 0) && test_bit(ASYI_TXBUSY, &portp->istate)) size = 1; - return(size); + return size; } /*****************************************************************************/ @@ -1447,7 +1447,7 @@ static int stl_setserial(stlport_t *portp, struct serial_struct __user *sp) (sio.close_delay != portp->close_delay) || ((sio.flags & ~ASYNC_USR_MASK) != (portp->flags & ~ASYNC_USR_MASK))) - return(-EPERM); + return -EPERM; } portp->flags = (portp->flags & ~ASYNC_USR_MASK) | @@ -1457,7 +1457,7 @@ static int stl_setserial(stlport_t *portp, struct serial_struct __user *sp) portp->closing_wait = sio.closing_wait; portp->custom_divisor = sio.custom_divisor; stl_setport(portp, portp->tty->termios); - return(0); + return 0; } /*****************************************************************************/ @@ -1467,12 +1467,12 @@ static int stl_tiocmget(struct tty_struct *tty, struct file *file) stlport_t *portp; if (tty == (struct tty_struct *) NULL) - return(-ENODEV); + return -ENODEV; portp = tty->driver_data; if (portp == (stlport_t *) NULL) - return(-ENODEV); + return -ENODEV; if (tty->flags & (1 << TTY_IO_ERROR)) - return(-EIO); + return -EIO; return stl_getsignals(portp); } @@ -1484,12 +1484,12 @@ static int stl_tiocmset(struct tty_struct *tty, struct file *file, int rts = -1, dtr = -1; if (tty == (struct tty_struct *) NULL) - return(-ENODEV); + return -ENODEV; portp = tty->driver_data; if (portp == (stlport_t *) NULL) - return(-ENODEV); + return -ENODEV; if (tty->flags & (1 << TTY_IO_ERROR)) - return(-EIO); + return -EIO; if (set & TIOCM_RTS) rts = 1; @@ -1517,15 +1517,15 @@ static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd #endif if (tty == (struct tty_struct *) NULL) - return(-ENODEV); + return -ENODEV; portp = tty->driver_data; if (portp == (stlport_t *) NULL) - return(-ENODEV); + return -ENODEV; if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && (cmd != COM_GETPORTSTATS) && (cmd != COM_CLRPORTSTATS)) { if (tty->flags & (1 << TTY_IO_ERROR)) - return(-EIO); + return -EIO; } rc = 0; @@ -1566,7 +1566,7 @@ static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd break; } - return(rc); + return rc; } /*****************************************************************************/ @@ -1872,7 +1872,7 @@ static int stl_portinfo(stlport_t *portp, int portnr, char *pos) pos[(MAXLINE - 2)] = '+'; pos[(MAXLINE - 1)] = '\n'; - return(MAXLINE); + return MAXLINE; } /*****************************************************************************/ @@ -1957,7 +1957,7 @@ static int stl_readproc(char *page, char **start, off_t off, int count, int *eof stl_readdone: *start = page; - return(pos - page); + return (pos - page); } /*****************************************************************************/ @@ -2349,7 +2349,7 @@ static inline int stl_initeio(stlbrd_t *brdp) } else { rc = 0; } - return(rc); + return rc; } /*****************************************************************************/ @@ -3116,7 +3116,7 @@ static int __init stl_init(void) return -1; } - return(0); + return 0; } /*****************************************************************************/ @@ -3132,7 +3132,7 @@ static int __init stl_init(void) static int stl_cd1400getreg(stlport_t *portp, int regnr) { outb((regnr + portp->uartaddr), portp->ioaddr); - return(inb(portp->ioaddr + EREG_DATA)); + return inb(portp->ioaddr + EREG_DATA); } static void stl_cd1400setreg(stlport_t *portp, int regnr, int value) @@ -3146,9 +3146,9 @@ static int stl_cd1400updatereg(stlport_t *portp, int regnr, int value) outb((regnr + portp->uartaddr), portp->ioaddr); if (inb(portp->ioaddr + EREG_DATA) != value) { outb(value, portp->ioaddr + EREG_DATA); - return(1); + return 1; } - return(0); + return 0; } /*****************************************************************************/ @@ -3206,7 +3206,7 @@ static int stl_cd1400panelinit(stlbrd_t *brdp, stlpanel_t *panelp) } BRDDISABLE(panelp->brdnr); - return(chipmask); + return chipmask; } /*****************************************************************************/ @@ -3557,7 +3557,7 @@ static int stl_cd1400getsignals(stlport_t *portp) #else sigs |= TIOCM_DSR; #endif - return(sigs); + return sigs; } /*****************************************************************************/ @@ -3830,9 +3830,9 @@ static int stl_cd1400datastate(stlport_t *portp) #endif if (portp == (stlport_t *) NULL) - return(0); + return 0; - return(test_bit(ASYI_TXBUSY, &portp->istate) ? 1 : 0); + return test_bit(ASYI_TXBUSY, &portp->istate) ? 1 : 0; } /*****************************************************************************/ @@ -3912,20 +3912,20 @@ static inline int stl_cd1400breakisr(stlport_t *portp, int ioaddr) outb((SRER + portp->uartaddr), ioaddr); outb((inb(ioaddr + EREG_DATA) & ~(SRER_TXDATA | SRER_TXEMPTY)), (ioaddr + EREG_DATA)); - return(1); + return 1; } else if (portp->brklen > 1) { outb((TDR + portp->uartaddr), ioaddr); outb(ETC_CMD, (ioaddr + EREG_DATA)); outb(ETC_STOPBREAK, (ioaddr + EREG_DATA)); portp->brklen = -1; - return(1); + return 1; } else { outb((COR2 + portp->uartaddr), ioaddr); outb((inb(ioaddr + EREG_DATA) & ~COR2_ETC), (ioaddr + EREG_DATA)); portp->brklen = 0; } - return(0); + return 0; } /*****************************************************************************/ @@ -4166,7 +4166,7 @@ static void stl_cd1400mdmisr(stlpanel_t *panelp, int ioaddr) static int stl_sc26198getreg(stlport_t *portp, int regnr) { outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR)); - return(inb(portp->ioaddr + XP_DATA)); + return inb(portp->ioaddr + XP_DATA); } static void stl_sc26198setreg(stlport_t *portp, int regnr, int value) @@ -4180,9 +4180,9 @@ static int stl_sc26198updatereg(stlport_t *portp, int regnr, int value) outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR)); if (inb(portp->ioaddr + XP_DATA) != value) { outb(value, (portp->ioaddr + XP_DATA)); - return(1); + return 1; } - return(0); + return 0; } /*****************************************************************************/ @@ -4194,7 +4194,7 @@ static int stl_sc26198updatereg(stlport_t *portp, int regnr, int value) static int stl_sc26198getglobreg(stlport_t *portp, int regnr) { outb(regnr, (portp->ioaddr + XP_ADDR)); - return(inb(portp->ioaddr + XP_DATA)); + return inb(portp->ioaddr + XP_DATA); } #if 0 @@ -4252,7 +4252,7 @@ static int stl_sc26198panelinit(stlbrd_t *brdp, stlpanel_t *panelp) } BRDDISABLE(panelp->brdnr); - return(chipmask); + return chipmask; } /*****************************************************************************/ @@ -4546,7 +4546,7 @@ static int stl_sc26198getsignals(stlport_t *portp) sigs |= (ipr & IPR_DTR) ? 0: TIOCM_DTR; sigs |= (ipr & IPR_RTS) ? 0: TIOCM_RTS; sigs |= TIOCM_DSR; - return(sigs); + return sigs; } /*****************************************************************************/ @@ -4828,9 +4828,9 @@ static int stl_sc26198datastate(stlport_t *portp) #endif if (portp == (stlport_t *) NULL) - return(0); + return 0; if (test_bit(ASYI_TXBUSY, &portp->istate)) - return(1); + return 1; save_flags(flags); cli(); @@ -4839,7 +4839,7 @@ static int stl_sc26198datastate(stlport_t *portp) BRDDISABLE(portp->brdnr); restore_flags(flags); - return((sr & SR_TXEMPTY) ? 0 : 1); + return (sr & SR_TXEMPTY) ? 0 : 1; } /*****************************************************************************/ diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c index 9f1b466c4f8..ede688a4e14 100644 --- a/drivers/char/synclink.c +++ b/drivers/char/synclink.c @@ -951,7 +951,6 @@ static void* mgsl_get_text_ptr(void) * memory if large numbers of serial ports are open. */ static unsigned char *tmp_buf; -static DECLARE_MUTEX(tmp_buf_sem); static inline int mgsl_paranoia_check(struct mgsl_struct *info, char *name, const char *routine) diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index 07c9be6a6bb..a85a60a93de 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -2630,7 +2630,7 @@ static int get_interface(struct slgt_info *info, int __user *if_mode) static int set_interface(struct slgt_info *info, int if_mode) { unsigned long flags; - unsigned char val; + unsigned short val; DBGINFO(("%s set_interface=%x)\n", info->device_name, if_mode)); spin_lock_irqsave(&info->lock,flags); diff --git a/drivers/char/tlclk.c b/drivers/char/tlclk.c index bc56df8a347..4c272189cd4 100644 --- a/drivers/char/tlclk.c +++ b/drivers/char/tlclk.c @@ -34,7 +34,6 @@ #include <linux/kernel.h> /* printk() */ #include <linux/fs.h> /* everything... */ #include <linux/errno.h> /* error codes */ -#include <linux/delay.h> /* udelay */ #include <linux/slab.h> #include <linux/ioport.h> #include <linux/interrupt.h> @@ -156,6 +155,8 @@ This directory exports the following interfaces. There operation is documented in the MCPBL0010 TPS under the Telecom Clock API section, 11.4. alarms : current_ref : +received_ref_clk3a : +received_ref_clk3b : enable_clk3a_output : enable_clk3b_output : enable_clka0_output : @@ -165,7 +166,7 @@ enable_clkb1_output : filter_select : hardware_switching : hardware_switching_mode : -interrupt_switch : +telclock_version : mode_select : refalign : reset : @@ -173,7 +174,6 @@ select_amcb1_transmit_clock : select_amcb2_transmit_clock : select_redundant_clock : select_ref_frequency : -test_mode : All sysfs interfaces are integers in hex format, i.e echo 99 > refalign has the same effect as echo 0x99 > refalign. @@ -226,7 +226,7 @@ static int tlclk_release(struct inode *inode, struct file *filp) return 0; } -ssize_t tlclk_read(struct file *filp, char __user *buf, size_t count, +static ssize_t tlclk_read(struct file *filp, char __user *buf, size_t count, loff_t *f_pos) { if (count < sizeof(struct tlclk_alarms)) @@ -242,7 +242,7 @@ ssize_t tlclk_read(struct file *filp, char __user *buf, size_t count, return sizeof(struct tlclk_alarms); } -ssize_t tlclk_write(struct file *filp, const char __user *buf, size_t count, +static ssize_t tlclk_write(struct file *filp, const char __user *buf, size_t count, loff_t *f_pos) { return 0; @@ -278,21 +278,21 @@ static ssize_t show_current_ref(struct device *d, static DEVICE_ATTR(current_ref, S_IRUGO, show_current_ref, NULL); -static ssize_t show_interrupt_switch(struct device *d, +static ssize_t show_telclock_version(struct device *d, struct device_attribute *attr, char *buf) { unsigned long ret_val; unsigned long flags; spin_lock_irqsave(&event_lock, flags); - ret_val = inb(TLCLK_REG6); + ret_val = inb(TLCLK_REG5); spin_unlock_irqrestore(&event_lock, flags); return sprintf(buf, "0x%lX\n", ret_val); } -static DEVICE_ATTR(interrupt_switch, S_IRUGO, - show_interrupt_switch, NULL); +static DEVICE_ATTR(telclock_version, S_IRUGO, + show_telclock_version, NULL); static ssize_t show_alarms(struct device *d, struct device_attribute *attr, char *buf) @@ -309,6 +309,50 @@ static ssize_t show_alarms(struct device *d, static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); +static ssize_t store_received_ref_clk3a(struct device *d, + struct device_attribute *attr, const char *buf, size_t count) +{ + unsigned long tmp; + unsigned char val; + unsigned long flags; + + sscanf(buf, "%lX", &tmp); + dev_dbg(d, ": tmp = 0x%lX\n", tmp); + + val = (unsigned char)tmp; + spin_lock_irqsave(&event_lock, flags); + SET_PORT_BITS(TLCLK_REG1, 0xef, val); + spin_unlock_irqrestore(&event_lock, flags); + + return strnlen(buf, count); +} + +static DEVICE_ATTR(received_ref_clk3a, S_IWUGO, NULL, + store_received_ref_clk3a); + + +static ssize_t store_received_ref_clk3b(struct device *d, + struct device_attribute *attr, const char *buf, size_t count) +{ + unsigned long tmp; + unsigned char val; + unsigned long flags; + + sscanf(buf, "%lX", &tmp); + dev_dbg(d, ": tmp = 0x%lX\n", tmp); + + val = (unsigned char)tmp; + spin_lock_irqsave(&event_lock, flags); + SET_PORT_BITS(TLCLK_REG1, 0xef, val << 1); + spin_unlock_irqrestore(&event_lock, flags); + + return strnlen(buf, count); +} + +static DEVICE_ATTR(received_ref_clk3b, S_IWUGO, NULL, + store_received_ref_clk3b); + + static ssize_t store_enable_clk3b_output(struct device *d, struct device_attribute *attr, const char *buf, size_t count) { @@ -436,26 +480,6 @@ static ssize_t store_enable_clka0_output(struct device *d, static DEVICE_ATTR(enable_clka0_output, S_IWUGO, NULL, store_enable_clka0_output); -static ssize_t store_test_mode(struct device *d, - struct device_attribute *attr, const char *buf, size_t count) -{ - unsigned long flags; - unsigned long tmp; - unsigned char val; - - sscanf(buf, "%lX", &tmp); - dev_dbg(d, "tmp = 0x%lX\n", tmp); - - val = (unsigned char)tmp; - spin_lock_irqsave(&event_lock, flags); - SET_PORT_BITS(TLCLK_REG4, 0xfd, 2); - spin_unlock_irqrestore(&event_lock, flags); - - return strnlen(buf, count); -} - -static DEVICE_ATTR(test_mode, S_IWUGO, NULL, store_test_mode); - static ssize_t store_select_amcb2_transmit_clock(struct device *d, struct device_attribute *attr, const char *buf, size_t count) { @@ -475,7 +499,7 @@ static ssize_t store_select_amcb2_transmit_clock(struct device *d, SET_PORT_BITS(TLCLK_REG3, 0xc7, 0x38); switch (val) { case CLK_8_592MHz: - SET_PORT_BITS(TLCLK_REG0, 0xfc, 1); + SET_PORT_BITS(TLCLK_REG0, 0xfc, 2); break; case CLK_11_184MHz: SET_PORT_BITS(TLCLK_REG0, 0xfc, 0); @@ -484,7 +508,7 @@ static ssize_t store_select_amcb2_transmit_clock(struct device *d, SET_PORT_BITS(TLCLK_REG0, 0xfc, 3); break; case CLK_44_736MHz: - SET_PORT_BITS(TLCLK_REG0, 0xfc, 2); + SET_PORT_BITS(TLCLK_REG0, 0xfc, 1); break; } } else @@ -653,9 +677,7 @@ static ssize_t store_refalign (struct device *d, dev_dbg(d, "tmp = 0x%lX\n", tmp); spin_lock_irqsave(&event_lock, flags); SET_PORT_BITS(TLCLK_REG0, 0xf7, 0); - udelay(2); SET_PORT_BITS(TLCLK_REG0, 0xf7, 0x08); - udelay(2); SET_PORT_BITS(TLCLK_REG0, 0xf7, 0); spin_unlock_irqrestore(&event_lock, flags); @@ -706,15 +728,16 @@ static DEVICE_ATTR(reset, S_IWUGO, NULL, store_reset); static struct attribute *tlclk_sysfs_entries[] = { &dev_attr_current_ref.attr, - &dev_attr_interrupt_switch.attr, + &dev_attr_telclock_version.attr, &dev_attr_alarms.attr, + &dev_attr_received_ref_clk3a.attr, + &dev_attr_received_ref_clk3b.attr, &dev_attr_enable_clk3a_output.attr, &dev_attr_enable_clk3b_output.attr, &dev_attr_enable_clkb1_output.attr, &dev_attr_enable_clka1_output.attr, &dev_attr_enable_clkb0_output.attr, &dev_attr_enable_clka0_output.attr, - &dev_attr_test_mode.attr, &dev_attr_select_amcb1_transmit_clock.attr, &dev_attr_select_amcb2_transmit_clock.attr, &dev_attr_select_redundant_clock.attr, diff --git a/drivers/char/tpm/tpm_bios.c b/drivers/char/tpm/tpm_bios.c index aedf7a8e6da..537aa45d8c6 100644 --- a/drivers/char/tpm/tpm_bios.c +++ b/drivers/char/tpm/tpm_bios.c @@ -191,7 +191,7 @@ static int get_event_name(char *dest, struct tcpa_event *event, const char *name = ""; char data[40] = ""; int i, n_len = 0, d_len = 0; - u32 event_id, event_data_size; + u32 event_id; switch(event->event_type) { case PREBOOT: @@ -220,8 +220,7 @@ static int get_event_name(char *dest, struct tcpa_event *event, } break; case EVENT_TAG: - event_id = be32_to_cpu(event_entry); - event_data_size = be32_to_cpu(&event_entry[4]); + event_id = be32_to_cpu(*((u32 *)event_entry)); /* ToDo Row data -> Base64 */ @@ -376,7 +375,7 @@ static int read_log(struct tpm_bios_log *log) { struct acpi_tcpa *buff; acpi_status status; - void *virt; + struct acpi_table_header *virt; if (log->bios_event_log != NULL) { printk(KERN_ERR @@ -413,7 +412,7 @@ static int read_log(struct tpm_bios_log *log) log->bios_event_log_end = log->bios_event_log + buff->log_max_len; - acpi_os_map_memory(buff->log_start_addr, buff->log_max_len, &virt); + acpi_os_map_memory(buff->log_start_addr, buff->log_max_len, (void *) &virt); memcpy(log->bios_event_log, virt, buff->log_max_len); @@ -487,26 +486,35 @@ struct file_operations tpm_binary_bios_measurements_ops = { .release = tpm_bios_measurements_release, }; +static int is_bad(void *p) +{ + if (!p) + return 1; + if (IS_ERR(p) && (PTR_ERR(p) != -ENODEV)) + return 1; + return 0; +} + struct dentry **tpm_bios_log_setup(char *name) { struct dentry **ret = NULL, *tpm_dir, *bin_file, *ascii_file; tpm_dir = securityfs_create_dir(name, NULL); - if (!tpm_dir) + if (is_bad(tpm_dir)) goto out; bin_file = securityfs_create_file("binary_bios_measurements", S_IRUSR | S_IRGRP, tpm_dir, NULL, &tpm_binary_bios_measurements_ops); - if (!bin_file) + if (is_bad(bin_file)) goto out_tpm; ascii_file = securityfs_create_file("ascii_bios_measurements", S_IRUSR | S_IRGRP, tpm_dir, NULL, &tpm_ascii_bios_measurements_ops); - if (!ascii_file) + if (is_bad(ascii_file)) goto out_bin; ret = kmalloc(3 * sizeof(struct dentry *), GFP_KERNEL); @@ -538,3 +546,4 @@ void tpm_bios_log_teardown(struct dentry **lst) securityfs_remove(lst[i]); } EXPORT_SYMBOL_GPL(tpm_bios_log_teardown); +MODULE_LICENSE("GPL"); diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c index 8198dbb7370..ec7590951af 100644 --- a/drivers/char/tpm/tpm_infineon.c +++ b/drivers/char/tpm/tpm_infineon.c @@ -441,7 +441,7 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev, if ((ioh << 8 | iol) != tpm_inf.base) { dev_err(&dev->dev, - "Could not set IO-ports to %04x\n", + "Could not set IO-ports to 0x%lx\n", tpm_inf.base); release_region(tpm_inf.base, TPM_INF_PORT_LEN); return -EIO; diff --git a/drivers/char/vt.c b/drivers/char/vt.c index f1d9cb7feae..0900d1dbee5 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -3213,6 +3213,7 @@ void getconsxy(struct vc_data *vc, unsigned char *p) void putconsxy(struct vc_data *vc, unsigned char *p) { + hide_cursor(vc); gotoxy(vc, p[0], p[1]); set_cursor(vc); } diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig index a6544790af6..c0dfcf273f0 100644 --- a/drivers/char/watchdog/Kconfig +++ b/drivers/char/watchdog/Kconfig @@ -395,12 +395,38 @@ config MACHZ_WDT To compile this driver as a module, choose M here: the module will be called machzwd. +config SBC_EPX_C3_WATCHDOG + tristate "Winsystems SBC EPX-C3 watchdog" + depends on WATCHDOG && X86 + ---help--- + This is the driver for the built-in watchdog timer on the EPX-C3 + Single-board computer made by Winsystems, Inc. + + *Note*: This hardware watchdog is not probeable and thus there + is no way to know if writing to its IO address will corrupt + your system or have any real effect. The only way to be sure + that this driver does what you want is to make sure you + are runnning it on an EPX-C3 from Winsystems with the watchdog + timer at IO address 0x1ee and 0x1ef. It will write to both those + IO ports. Basically, the assumption is made that if you compile + this driver into your kernel and/or load it as a module, that you + know what you are doing and that you are in fact running on an + EPX-C3 board! + + To compile this driver as a module, choose M here: the + module will be called sbc_epx_c3. + + # PowerPC Architecture config 8xx_WDT tristate "MPC8xx Watchdog Timer" depends on WATCHDOG && 8xx +config 83xx_WDT + tristate "MPC83xx Watchdog Timer" + depends on WATCHDOG && PPC_83xx + config MV64X60_WDT tristate "MV64X60 (Marvell Discovery) Watchdog Timer" depends on WATCHDOG && MV64X60 diff --git a/drivers/char/watchdog/Makefile b/drivers/char/watchdog/Makefile index cfd0a398771..36c0b282b8b 100644 --- a/drivers/char/watchdog/Makefile +++ b/drivers/char/watchdog/Makefile @@ -52,9 +52,11 @@ obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o obj-$(CONFIG_W83977F_WDT) += w83977f_wdt.o obj-$(CONFIG_MACHZ_WDT) += machzwd.o +obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc_epx_c3.o # PowerPC Architecture obj-$(CONFIG_8xx_WDT) += mpc8xx_wdt.o +obj-$(CONFIG_83xx_WDT) += mpc83xx_wdt.o obj-$(CONFIG_MV64X60_WDT) += mv64x60_wdt.o obj-$(CONFIG_BOOKE_WDT) += booke_wdt.o diff --git a/drivers/char/watchdog/mpc83xx_wdt.c b/drivers/char/watchdog/mpc83xx_wdt.c new file mode 100644 index 00000000000..5d6f5061603 --- /dev/null +++ b/drivers/char/watchdog/mpc83xx_wdt.c @@ -0,0 +1,229 @@ +/* + * mpc83xx_wdt.c - MPC83xx watchdog userspace interface + * + * Authors: Dave Updegraff <dave@cray.org> + * Kumar Gala <galak@kernel.crashing.org> + * Attribution: from 83xx_wst: Florian Schirmer <jolt@tuxbox.org> + * ..and from sc520_wdt + * + * Note: it appears that you can only actually ENABLE or DISABLE the thing + * once after POR. Once enabled, you cannot disable, and vice versa. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/miscdevice.h> +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/watchdog.h> +#include <asm/io.h> +#include <asm/uaccess.h> + +struct mpc83xx_wdt { + __be32 res0; + __be32 swcrr; /* System watchdog control register */ +#define SWCRR_SWTC 0xFFFF0000 /* Software Watchdog Time Count. */ +#define SWCRR_SWEN 0x00000004 /* Watchdog Enable bit. */ +#define SWCRR_SWRI 0x00000002 /* Software Watchdog Reset/Interrupt Select bit.*/ +#define SWCRR_SWPR 0x00000001 /* Software Watchdog Counter Prescale bit. */ + __be32 swcnr; /* System watchdog count register */ + u8 res1[2]; + __be16 swsrr; /* System watchdog service register */ + u8 res2[0xF0]; +}; + +static struct mpc83xx_wdt __iomem *wd_base; + +static u16 timeout = 0xffff; +module_param(timeout, ushort, 0); +MODULE_PARM_DESC(timeout, "Watchdog timeout in ticks. (0<timeout<65536, default=65535"); + +static int reset = 1; +module_param(reset, bool, 0); +MODULE_PARM_DESC(reset, "Watchdog Interrupt/Reset Mode. 0 = interrupt, 1 = reset"); + +/* + * We always prescale, but if someone really doesn't want to they can set this + * to 0 + */ +static int prescale = 1; +static unsigned int timeout_sec; + +static unsigned long wdt_is_open; +static spinlock_t wdt_spinlock; + +static void mpc83xx_wdt_keepalive(void) +{ + /* Ping the WDT */ + spin_lock(&wdt_spinlock); + out_be16(&wd_base->swsrr, 0x556c); + out_be16(&wd_base->swsrr, 0xaa39); + spin_unlock(&wdt_spinlock); +} + +static ssize_t mpc83xx_wdt_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + if (count) + mpc83xx_wdt_keepalive(); + return count; +} + +static int mpc83xx_wdt_open(struct inode *inode, struct file *file) +{ + u32 tmp = SWCRR_SWEN; + if (test_and_set_bit(0, &wdt_is_open)) + return -EBUSY; + + /* Once we start the watchdog we can't stop it */ + __module_get(THIS_MODULE); + + /* Good, fire up the show */ + if (prescale) + tmp |= SWCRR_SWPR; + if (reset) + tmp |= SWCRR_SWRI; + + tmp |= timeout << 16; + + out_be32(&wd_base->swcrr, tmp); + + return nonseekable_open(inode, file); +} + +static int mpc83xx_wdt_release(struct inode *inode, struct file *file) +{ + printk(KERN_CRIT "Unexpected close, not stopping watchdog!\n"); + mpc83xx_wdt_keepalive(); + clear_bit(0, &wdt_is_open); + return 0; +} + +static int mpc83xx_wdt_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + static struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING, + .firmware_version = 1, + .identity = "MPC83xx", + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + case WDIOC_KEEPALIVE: + mpc83xx_wdt_keepalive(); + return 0; + case WDIOC_GETTIMEOUT: + return put_user(timeout_sec, p); + default: + return -ENOIOCTLCMD; + } +} + +static struct file_operations mpc83xx_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = mpc83xx_wdt_write, + .ioctl = mpc83xx_wdt_ioctl, + .open = mpc83xx_wdt_open, + .release = mpc83xx_wdt_release, +}; + +static struct miscdevice mpc83xx_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &mpc83xx_wdt_fops, +}; + +static int __devinit mpc83xx_wdt_probe(struct platform_device *dev) +{ + struct resource *r; + int ret; + unsigned int *freq = dev->dev.platform_data; + + /* get a pointer to the register memory */ + r = platform_get_resource(dev, IORESOURCE_MEM, 0); + + if (!r) { + ret = -ENODEV; + goto err_out; + } + + wd_base = ioremap(r->start, sizeof (struct mpc83xx_wdt)); + + if (wd_base == NULL) { + ret = -ENOMEM; + goto err_out; + } + + ret = misc_register(&mpc83xx_wdt_miscdev); + if (ret) { + printk(KERN_ERR "cannot register miscdev on minor=%d " + "(err=%d)\n", + WATCHDOG_MINOR, ret); + goto err_unmap; + } + + /* Calculate the timeout in seconds */ + if (prescale) + timeout_sec = (timeout * 0x10000) / (*freq); + else + timeout_sec = timeout / (*freq); + + printk(KERN_INFO "WDT driver for MPC83xx initialized. " + "mode:%s timeout=%d (%d seconds)\n", + reset ? "reset":"interrupt", timeout, timeout_sec); + + spin_lock_init(&wdt_spinlock); + + return 0; + +err_unmap: + iounmap(wd_base); +err_out: + return ret; +} + +static int __devexit mpc83xx_wdt_remove(struct platform_device *dev) +{ + misc_deregister(&mpc83xx_wdt_miscdev); + iounmap(wd_base); + + return 0; +} + +static struct platform_driver mpc83xx_wdt_driver = { + .probe = mpc83xx_wdt_probe, + .remove = __devexit_p(mpc83xx_wdt_remove), + .driver = { + .name = "mpc83xx_wdt", + }, +}; + +static int __init mpc83xx_wdt_init(void) +{ + return platform_driver_register(&mpc83xx_wdt_driver); +} + +static void __exit mpc83xx_wdt_exit(void) +{ + platform_driver_unregister(&mpc83xx_wdt_driver); +} + +module_init(mpc83xx_wdt_init); +module_exit(mpc83xx_wdt_exit); + +MODULE_AUTHOR("Dave Updegraff, Kumar Gala"); +MODULE_DESCRIPTION("Driver for watchdog timer in MPC83xx uProcessor"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); diff --git a/drivers/char/watchdog/sa1100_wdt.c b/drivers/char/watchdog/sa1100_wdt.c index fb88b4041dc..b474ea52d6e 100644 --- a/drivers/char/watchdog/sa1100_wdt.c +++ b/drivers/char/watchdog/sa1100_wdt.c @@ -74,7 +74,7 @@ static int sa1100dog_release(struct inode *inode, struct file *file) return 0; } -static ssize_t sa1100dog_write(struct file *file, const char *data, size_t len, loff_t *ppos) +static ssize_t sa1100dog_write(struct file *file, const char __user *data, size_t len, loff_t *ppos) { if (len) /* Refresh OSMR3 timer. */ @@ -96,20 +96,20 @@ static int sa1100dog_ioctl(struct inode *inode, struct file *file, switch (cmd) { case WDIOC_GETSUPPORT: - ret = copy_to_user((struct watchdog_info *)arg, &ident, + ret = copy_to_user((struct watchdog_info __user *)arg, &ident, sizeof(ident)) ? -EFAULT : 0; break; case WDIOC_GETSTATUS: - ret = put_user(0, (int *)arg); + ret = put_user(0, (int __user *)arg); break; case WDIOC_GETBOOTSTATUS: - ret = put_user(boot_status, (int *)arg); + ret = put_user(boot_status, (int __user *)arg); break; case WDIOC_SETTIMEOUT: - ret = get_user(time, (int *)arg); + ret = get_user(time, (int __user *)arg); if (ret) break; @@ -123,7 +123,7 @@ static int sa1100dog_ioctl(struct inode *inode, struct file *file, /*fall through*/ case WDIOC_GETTIMEOUT: - ret = put_user(pre_margin / OSCR_FREQ, (int *)arg); + ret = put_user(pre_margin / OSCR_FREQ, (int __user *)arg); break; case WDIOC_KEEPALIVE: diff --git a/drivers/char/watchdog/sbc_epx_c3.c b/drivers/char/watchdog/sbc_epx_c3.c new file mode 100644 index 00000000000..951764614eb --- /dev/null +++ b/drivers/char/watchdog/sbc_epx_c3.c @@ -0,0 +1,216 @@ +/* + * SBC EPX C3 0.1 A Hardware Watchdog Device for the Winsystems EPX-C3 + * single board computer + * + * (c) Copyright 2006 Calin A. Culianu <calin@ajvar.org>, All Rights + * Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * based on softdog.c by Alan Cox <alan@redhat.com> + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/config.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/mm.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <asm/uaccess.h> +#include <asm/io.h> + +#define PFX "epx_c3: " +static int epx_c3_alive; + +#define WATCHDOG_TIMEOUT 1 /* 1 sec default timeout */ + +static int nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, int, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); + +#define EPXC3_WATCHDOG_CTL_REG 0x1ee /* write 1 to enable, 0 to disable */ +#define EPXC3_WATCHDOG_PET_REG 0x1ef /* write anything to pet once enabled */ + +static void epx_c3_start(void) +{ + outb(1, EPXC3_WATCHDOG_CTL_REG); +} + +static void epx_c3_stop(void) +{ + + outb(0, EPXC3_WATCHDOG_CTL_REG); + + printk(KERN_INFO PFX "Stopped watchdog timer.\n"); +} + +static void epx_c3_pet(void) +{ + outb(1, EPXC3_WATCHDOG_PET_REG); +} + +/* + * Allow only one person to hold it open + */ +static int epx_c3_open(struct inode *inode, struct file *file) +{ + if (epx_c3_alive) + return -EBUSY; + + if (nowayout) + __module_get(THIS_MODULE); + + /* Activate timer */ + epx_c3_start(); + epx_c3_pet(); + + epx_c3_alive = 1; + printk(KERN_INFO "Started watchdog timer.\n"); + + return nonseekable_open(inode, file); +} + +static int epx_c3_release(struct inode *inode, struct file *file) +{ + /* Shut off the timer. + * Lock it in if it's a module and we defined ...NOWAYOUT */ + if (!nowayout) + epx_c3_stop(); /* Turn the WDT off */ + + epx_c3_alive = 0; + + return 0; +} + +static ssize_t epx_c3_write(struct file *file, const char *data, + size_t len, loff_t *ppos) +{ + /* Refresh the timer. */ + if (len) + epx_c3_pet(); + return len; +} + +static int epx_c3_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + int options, retval = -EINVAL; + static struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE, + .firmware_version = 0, + .identity = "Winsystems EPX-C3 H/W Watchdog", + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + if (copy_to_user((struct watchdog_info *)arg, + &ident, sizeof(ident))) + return -EFAULT; + return 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0,(int *)arg); + case WDIOC_KEEPALIVE: + epx_c3_pet(); + return 0; + case WDIOC_GETTIMEOUT: + return put_user(WATCHDOG_TIMEOUT,(int *)arg); + case WDIOC_SETOPTIONS: { + if (get_user(options, (int *)arg)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) { + epx_c3_stop(); + retval = 0; + } + + if (options & WDIOS_ENABLECARD) { + epx_c3_start(); + retval = 0; + } + + return retval; + } + default: + return -ENOIOCTLCMD; + } +} + +static int epx_c3_notify_sys(struct notifier_block *this, unsigned long code, + void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + epx_c3_stop(); /* Turn the WDT off */ + + return NOTIFY_DONE; +} + +static struct file_operations epx_c3_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = epx_c3_write, + .ioctl = epx_c3_ioctl, + .open = epx_c3_open, + .release = epx_c3_release, +}; + +static struct miscdevice epx_c3_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &epx_c3_fops, +}; + +static struct notifier_block epx_c3_notifier = { + .notifier_call = epx_c3_notify_sys, +}; + +static const char banner[] __initdata = + KERN_INFO PFX "Hardware Watchdog Timer for Winsystems EPX-C3 SBC: 0.1\n"; + +static int __init watchdog_init(void) +{ + int ret; + + ret = register_reboot_notifier(&epx_c3_notifier); + if (ret) { + printk(KERN_ERR PFX "cannot register reboot notifier " + "(err=%d)\n", ret); + return ret; + } + + ret = misc_register(&epx_c3_miscdev); + if (ret) { + printk(KERN_ERR PFX "cannot register miscdev on minor=%d " + "(err=%d)\n", WATCHDOG_MINOR, ret); + unregister_reboot_notifier(&epx_c3_notifier); + return ret; + } + + printk(banner); + + return 0; +} + +static void __exit watchdog_exit(void) +{ + misc_deregister(&epx_c3_miscdev); + unregister_reboot_notifier(&epx_c3_notifier); +} + +module_init(watchdog_init); +module_exit(watchdog_exit); + +MODULE_AUTHOR("Calin A. Culianu <calin@ajvar.org>"); +MODULE_DESCRIPTION("Hardware Watchdog Device for Winsystems EPX-C3 SBC. Note that there is no way to probe for this device -- so only use it if you are *sure* you are runnning on this specific SBC system from Winsystems! It writes to IO ports 0x1ee and 0x1ef!"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); |