diff options
Diffstat (limited to 'drivers/char')
63 files changed, 3378 insertions, 2392 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 43d6ba83a19..f5be8081cd8 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -190,7 +190,7 @@ config DIGIEPCA config ESPSERIAL tristate "Hayes ESP serial port support" - depends on SERIAL_NONSTANDARD && ISA && ISA_DMA_API + depends on SERIAL_NONSTANDARD && ISA && ISA_DMA_API && BROKEN help This is a driver which supports Hayes ESP serial ports. Both single port cards and multiport cards are supported. Make sure to read @@ -443,6 +443,17 @@ config UNIX98_PTYS All modern Linux systems use the Unix98 ptys. Say Y unless you're on an embedded system and want to conserve memory. +config DEVPTS_MULTIPLE_INSTANCES + bool "Support multiple instances of devpts" + depends on UNIX98_PTYS + default n + ---help--- + Enable support for multiple instances of devpts filesystem. + If you want to have isolated PTY namespaces (eg: in containers), + say Y here. Otherwise, say N. If enabled, each mount of devpts + filesystem with the '-o newinstance' option will create an + independent PTY namespace. + config LEGACY_PTYS bool "Legacy (BSD) PTY support" default y @@ -605,6 +616,7 @@ config HVC_ISERIES default y select HVC_DRIVER select HVC_IRQ + select VIOPATH help iSeries machines support a hypervisor virtual console. @@ -622,6 +634,16 @@ config HVC_BEAT help Toshiba's Cell Reference Set Beat Console device driver +config HVC_IUCV + bool "z/VM IUCV Hypervisor console support (VM only)" + depends on S390 + select HVC_DRIVER + select IUCV + default y + help + This driver provides a Hypervisor console (HVC) back-end to access + a Linux (console) terminal via a z/VM IUCV communication path. + config HVC_XEN bool "Xen Hypervisor Console support" depends on XEN @@ -631,6 +653,12 @@ config HVC_XEN help Xen virtual console device driver +config HVC_UDBG + bool "udbg based fake hypervisor console" + depends on PPC && EXPERIMENTAL + select HVC_DRIVER + default n + config VIRTIO_CONSOLE tristate "Virtio console" depends on VIRTIO @@ -814,7 +842,7 @@ config JS_RTC config GEN_RTC tristate "Generic /dev/rtc emulation" - depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH && !AVR32 + depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH && !AVR32 && !BLACKFIN ---help--- If you say Y here and create a character special file /dev/rtc with major number 10 and minor number 135 using mknod ("man mknod"), you diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 438f71317c5..9caf5b5ad1c 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -50,6 +50,8 @@ obj-$(CONFIG_HVC_BEAT) += hvc_beat.o obj-$(CONFIG_HVC_DRIVER) += hvc_console.o obj-$(CONFIG_HVC_IRQ) += hvc_irq.o obj-$(CONFIG_HVC_XEN) += hvc_xen.o +obj-$(CONFIG_HVC_IUCV) += hvc_iucv.o +obj-$(CONFIG_HVC_UDBG) += hvc_udbg.o obj-$(CONFIG_VIRTIO_CONSOLE) += virtio_console.o obj-$(CONFIG_RAW_DRIVER) += raw.o obj-$(CONFIG_SGI_SNSC) += snsc.o snsc_event.o diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 9cf6e9bb017..c7714185f83 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -40,6 +40,8 @@ #define PCI_DEVICE_ID_INTEL_Q45_IG 0x2E12 #define PCI_DEVICE_ID_INTEL_G45_HB 0x2E20 #define PCI_DEVICE_ID_INTEL_G45_IG 0x2E22 +#define PCI_DEVICE_ID_INTEL_G41_HB 0x2E30 +#define PCI_DEVICE_ID_INTEL_G41_IG 0x2E32 /* cover 915 and 945 variants */ #define IS_I915 (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_E7221_HB || \ @@ -63,7 +65,8 @@ #define IS_G4X (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGD_E_HB || \ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q45_HB || \ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G45_HB || \ - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_GM45_HB) + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_GM45_HB || \ + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G41_HB) extern int agp_memory_reserved; @@ -1196,6 +1199,7 @@ static void intel_i965_get_gtt_range(int *gtt_offset, int *gtt_size) case PCI_DEVICE_ID_INTEL_IGD_E_HB: case PCI_DEVICE_ID_INTEL_Q45_HB: case PCI_DEVICE_ID_INTEL_G45_HB: + case PCI_DEVICE_ID_INTEL_G41_HB: *gtt_offset = *gtt_size = MB(2); break; default: @@ -2156,13 +2160,15 @@ static const struct intel_driver_description { { PCI_DEVICE_ID_INTEL_Q33_HB, PCI_DEVICE_ID_INTEL_Q33_IG, 0, "Q33", NULL, &intel_g33_driver }, { PCI_DEVICE_ID_INTEL_GM45_HB, PCI_DEVICE_ID_INTEL_GM45_IG, 0, - "Mobile Intel? GM45 Express", NULL, &intel_i965_driver }, + "Mobile Intel® GM45 Express", NULL, &intel_i965_driver }, { PCI_DEVICE_ID_INTEL_IGD_E_HB, PCI_DEVICE_ID_INTEL_IGD_E_IG, 0, "Intel Integrated Graphics Device", NULL, &intel_i965_driver }, { PCI_DEVICE_ID_INTEL_Q45_HB, PCI_DEVICE_ID_INTEL_Q45_IG, 0, "Q45/Q43", NULL, &intel_i965_driver }, { PCI_DEVICE_ID_INTEL_G45_HB, PCI_DEVICE_ID_INTEL_G45_IG, 0, "G45/G43", NULL, &intel_i965_driver }, + { PCI_DEVICE_ID_INTEL_G41_HB, PCI_DEVICE_ID_INTEL_G41_IG, 0, + "G41", NULL, &intel_i965_driver }, { 0, 0, 0, NULL, NULL, NULL } }; @@ -2360,6 +2366,7 @@ static struct pci_device_id agp_intel_pci_table[] = { ID(PCI_DEVICE_ID_INTEL_IGD_E_HB), ID(PCI_DEVICE_ID_INTEL_Q45_HB), ID(PCI_DEVICE_ID_INTEL_G45_HB), + ID(PCI_DEVICE_ID_INTEL_G41_HB), { } }; diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c index b97aebd7aeb..4e0cfdeab14 100644 --- a/drivers/char/amiserial.c +++ b/drivers/char/amiserial.c @@ -170,7 +170,7 @@ static __inline__ void rtsdtr_ctrl(int bits) */ static void rs_stop(struct tty_struct *tty) { - struct async_struct *info = (struct async_struct *)tty->driver_data; + struct async_struct *info = tty->driver_data; unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_stop")) @@ -190,7 +190,7 @@ static void rs_stop(struct tty_struct *tty) static void rs_start(struct tty_struct *tty) { - struct async_struct *info = (struct async_struct *)tty->driver_data; + struct async_struct *info = tty->driver_data; unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_start")) @@ -861,7 +861,7 @@ static int rs_put_char(struct tty_struct *tty, unsigned char ch) static void rs_flush_chars(struct tty_struct *tty) { - struct async_struct *info = (struct async_struct *)tty->driver_data; + struct async_struct *info = tty->driver_data; unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_flush_chars")) @@ -934,7 +934,7 @@ static int rs_write(struct tty_struct * tty, const unsigned char *buf, int count static int rs_write_room(struct tty_struct *tty) { - struct async_struct *info = (struct async_struct *)tty->driver_data; + struct async_struct *info = tty->driver_data; if (serial_paranoia_check(info, tty->name, "rs_write_room")) return 0; @@ -943,7 +943,7 @@ static int rs_write_room(struct tty_struct *tty) static int rs_chars_in_buffer(struct tty_struct *tty) { - struct async_struct *info = (struct async_struct *)tty->driver_data; + struct async_struct *info = tty->driver_data; if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer")) return 0; @@ -952,7 +952,7 @@ static int rs_chars_in_buffer(struct tty_struct *tty) static void rs_flush_buffer(struct tty_struct *tty) { - struct async_struct *info = (struct async_struct *)tty->driver_data; + struct async_struct *info = tty->driver_data; unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_flush_buffer")) @@ -969,7 +969,7 @@ static void rs_flush_buffer(struct tty_struct *tty) */ static void rs_send_xchar(struct tty_struct *tty, char ch) { - struct async_struct *info = (struct async_struct *)tty->driver_data; + struct async_struct *info = tty->driver_data; unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_send_char")) @@ -1004,7 +1004,7 @@ static void rs_send_xchar(struct tty_struct *tty, char ch) */ static void rs_throttle(struct tty_struct * tty) { - struct async_struct *info = (struct async_struct *)tty->driver_data; + struct async_struct *info = tty->driver_data; unsigned long flags; #ifdef SERIAL_DEBUG_THROTTLE char buf[64]; @@ -1029,7 +1029,7 @@ static void rs_throttle(struct tty_struct * tty) static void rs_unthrottle(struct tty_struct * tty) { - struct async_struct *info = (struct async_struct *)tty->driver_data; + struct async_struct *info = tty->driver_data; unsigned long flags; #ifdef SERIAL_DEBUG_THROTTLE char buf[64]; @@ -1194,7 +1194,7 @@ static int get_lsr_info(struct async_struct * info, unsigned int __user *value) static int rs_tiocmget(struct tty_struct *tty, struct file *file) { - struct async_struct * info = (struct async_struct *)tty->driver_data; + struct async_struct * info = tty->driver_data; unsigned char control, status; unsigned long flags; @@ -1217,7 +1217,7 @@ static int rs_tiocmget(struct tty_struct *tty, struct file *file) static int rs_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - struct async_struct * info = (struct async_struct *)tty->driver_data; + struct async_struct * info = tty->driver_data; unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_ioctl")) @@ -1244,7 +1244,7 @@ static int rs_tiocmset(struct tty_struct *tty, struct file *file, */ static int rs_break(struct tty_struct *tty, int break_state) { - struct async_struct * info = (struct async_struct *)tty->driver_data; + struct async_struct * info = tty->driver_data; unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_break")) @@ -1264,7 +1264,7 @@ static int rs_break(struct tty_struct *tty, int break_state) static int rs_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg) { - struct async_struct * info = (struct async_struct *)tty->driver_data; + struct async_struct * info = tty->driver_data; struct async_icount cprev, cnow; /* kernel counter temps */ struct serial_icounter_struct icount; void __user *argp = (void __user *)arg; @@ -1368,7 +1368,7 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file, static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { - struct async_struct *info = (struct async_struct *)tty->driver_data; + struct async_struct *info = tty->driver_data; unsigned long flags; unsigned int cflag = tty->termios->c_cflag; @@ -1428,7 +1428,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) */ static void rs_close(struct tty_struct *tty, struct file * filp) { - struct async_struct * info = (struct async_struct *)tty->driver_data; + struct async_struct * info = tty->driver_data; struct serial_state *state; unsigned long flags; @@ -1523,7 +1523,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp) */ static void rs_wait_until_sent(struct tty_struct *tty, int timeout) { - struct async_struct * info = (struct async_struct *)tty->driver_data; + struct async_struct * info = tty->driver_data; unsigned long orig_jiffies, char_time; int lsr; @@ -1587,7 +1587,7 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout) */ static void rs_hangup(struct tty_struct *tty) { - struct async_struct * info = (struct async_struct *)tty->driver_data; + struct async_struct * info = tty->driver_data; struct serial_state *state = info->state; if (serial_paranoia_check(info, tty->name, "rs_hangup")) diff --git a/drivers/char/bsr.c b/drivers/char/bsr.c index 456f54db73e..977dfb1096a 100644 --- a/drivers/char/bsr.c +++ b/drivers/char/bsr.c @@ -60,6 +60,8 @@ struct bsr_dev { unsigned bsr_num; /* bsr id number for its type */ int bsr_minor; + struct list_head bsr_list; + dev_t bsr_dev; struct cdev bsr_cdev; struct device *bsr_device; @@ -67,8 +69,8 @@ struct bsr_dev { }; -static unsigned num_bsr_devs; -static struct bsr_dev *bsr_devs; +static unsigned total_bsr_devs; +static struct list_head bsr_devs = LIST_HEAD_INIT(bsr_devs); static struct class *bsr_class; static int bsr_major; @@ -146,24 +148,25 @@ const static struct file_operations bsr_fops = { static void bsr_cleanup_devs(void) { - int i; - for (i=0 ; i < num_bsr_devs; i++) { - struct bsr_dev *cur = bsr_devs + i; + struct bsr_dev *cur, *n; + + list_for_each_entry_safe(cur, n, &bsr_devs, bsr_list) { if (cur->bsr_device) { cdev_del(&cur->bsr_cdev); device_del(cur->bsr_device); } + list_del(&cur->bsr_list); + kfree(cur); } - - kfree(bsr_devs); } -static int bsr_create_devs(struct device_node *bn) +static int bsr_add_node(struct device_node *bn) { - int bsr_stride_len, bsr_bytes_len; + int bsr_stride_len, bsr_bytes_len, num_bsr_devs; const u32 *bsr_stride; const u32 *bsr_bytes; unsigned i; + int ret = -ENODEV; bsr_stride = of_get_property(bn, "ibm,lock-stride", &bsr_stride_len); bsr_bytes = of_get_property(bn, "ibm,#lock-bytes", &bsr_bytes_len); @@ -171,35 +174,36 @@ static int bsr_create_devs(struct device_node *bn) if (!bsr_stride || !bsr_bytes || (bsr_stride_len != bsr_bytes_len)) { printk(KERN_ERR "bsr of-node has missing/incorrect property\n"); - return -ENODEV; + return ret; } num_bsr_devs = bsr_bytes_len / sizeof(u32); - /* only a warning, its informational since we'll fail and exit */ - WARN_ON(num_bsr_devs > BSR_MAX_DEVS); - - bsr_devs = kzalloc(sizeof(struct bsr_dev) * num_bsr_devs, GFP_KERNEL); - if (!bsr_devs) - return -ENOMEM; - for (i = 0 ; i < num_bsr_devs; i++) { - struct bsr_dev *cur = bsr_devs + i; + struct bsr_dev *cur = kzalloc(sizeof(struct bsr_dev), + GFP_KERNEL); struct resource res; int result; + if (!cur) { + printk(KERN_ERR "Unable to alloc bsr dev\n"); + ret = -ENOMEM; + goto out_err; + } + result = of_address_to_resource(bn, i, &res); if (result < 0) { - printk(KERN_ERR "bsr of-node has invalid reg property\n"); - goto out_err; + printk(KERN_ERR "bsr of-node has invalid reg property, skipping\n"); + kfree(cur); + continue; } - cur->bsr_minor = i; + cur->bsr_minor = i + total_bsr_devs; cur->bsr_addr = res.start; cur->bsr_len = res.end - res.start + 1; cur->bsr_bytes = bsr_bytes[i]; cur->bsr_stride = bsr_stride[i]; - cur->bsr_dev = MKDEV(bsr_major, i); + cur->bsr_dev = MKDEV(bsr_major, i + total_bsr_devs); switch(cur->bsr_bytes) { case 8: @@ -220,14 +224,15 @@ static int bsr_create_devs(struct device_node *bn) } cur->bsr_num = bsr_types[cur->bsr_type]; - bsr_types[cur->bsr_type] = cur->bsr_num + 1; snprintf(cur->bsr_name, 32, "bsr%d_%d", cur->bsr_bytes, cur->bsr_num); cdev_init(&cur->bsr_cdev, &bsr_fops); result = cdev_add(&cur->bsr_cdev, cur->bsr_dev, 1); - if (result) + if (result) { + kfree(cur); goto out_err; + } cur->bsr_device = device_create(bsr_class, NULL, cur->bsr_dev, cur, cur->bsr_name); @@ -235,16 +240,37 @@ static int bsr_create_devs(struct device_node *bn) printk(KERN_ERR "device_create failed for %s\n", cur->bsr_name); cdev_del(&cur->bsr_cdev); + kfree(cur); goto out_err; } + + bsr_types[cur->bsr_type] = cur->bsr_num + 1; + list_add_tail(&cur->bsr_list, &bsr_devs); } + total_bsr_devs += num_bsr_devs; + return 0; out_err: bsr_cleanup_devs(); - return -ENODEV; + return ret; +} + +static int bsr_create_devs(struct device_node *bn) +{ + int ret; + + while (bn) { + ret = bsr_add_node(bn); + if (ret) { + of_node_put(bn); + return ret; + } + bn = of_find_compatible_node(bn, NULL, "ibm,bsr"); + } + return 0; } static int __init bsr_init(void) @@ -254,7 +280,7 @@ static int __init bsr_init(void) int ret = -ENODEV; int result; - np = of_find_compatible_node(NULL, "ibm,bsr", "ibm,bsr"); + np = of_find_compatible_node(NULL, NULL, "ibm,bsr"); if (!np) goto out_err; @@ -272,10 +298,10 @@ static int __init bsr_init(void) goto out_err_2; } - if ((ret = bsr_create_devs(np)) < 0) + if ((ret = bsr_create_devs(np)) < 0) { + np = NULL; goto out_err_3; - - of_node_put(np); + } return 0; diff --git a/drivers/char/consolemap.c b/drivers/char/consolemap.c index 4246b8e36cb..45d3e80156d 100644 --- a/drivers/char/consolemap.c +++ b/drivers/char/consolemap.c @@ -554,7 +554,7 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list) __get_user(fontpos, &list->fontpos); if ((err1 = con_insert_unipair(p, unicode,fontpos)) != 0) err = err1; - list++; + list++; } if (con_unify_unimap(vc, p)) diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index 5e5b1dc1a0a..6a59f72a9c2 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -5010,7 +5010,7 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, if (nchan == 0) { dev_err(&pdev->dev, "Cyclom-Y PCI host card with no " "Serial-Modules\n"); - return -EIO; + goto err_unmap; } } else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Hi) { struct RUNTIME_9060 __iomem *ctl_addr; diff --git a/drivers/char/ds1620.c b/drivers/char/ds1620.c index 74e9cd81b5b..61f0146e215 100644 --- a/drivers/char/ds1620.c +++ b/drivers/char/ds1620.c @@ -43,52 +43,51 @@ static const char *fan_state[] = { "off", "on", "on (hardwired)" }; * chance that the WaveArtist driver could touch these bits to * enable or disable the speaker. */ -extern spinlock_t gpio_lock; extern unsigned int system_rev; static inline void netwinder_ds1620_set_clk(int clk) { - gpio_modify_op(GPIO_DSCLK, clk ? GPIO_DSCLK : 0); + nw_gpio_modify_op(GPIO_DSCLK, clk ? GPIO_DSCLK : 0); } static inline void netwinder_ds1620_set_data(int dat) { - gpio_modify_op(GPIO_DATA, dat ? GPIO_DATA : 0); + nw_gpio_modify_op(GPIO_DATA, dat ? GPIO_DATA : 0); } static inline int netwinder_ds1620_get_data(void) { - return gpio_read() & GPIO_DATA; + return nw_gpio_read() & GPIO_DATA; } static inline void netwinder_ds1620_set_data_dir(int dir) { - gpio_modify_io(GPIO_DATA, dir ? GPIO_DATA : 0); + nw_gpio_modify_io(GPIO_DATA, dir ? GPIO_DATA : 0); } static inline void netwinder_ds1620_reset(void) { - cpld_modify(CPLD_DS_ENABLE, 0); - cpld_modify(CPLD_DS_ENABLE, CPLD_DS_ENABLE); + nw_cpld_modify(CPLD_DS_ENABLE, 0); + nw_cpld_modify(CPLD_DS_ENABLE, CPLD_DS_ENABLE); } static inline void netwinder_lock(unsigned long *flags) { - spin_lock_irqsave(&gpio_lock, *flags); + spin_lock_irqsave(&nw_gpio_lock, *flags); } static inline void netwinder_unlock(unsigned long *flags) { - spin_unlock_irqrestore(&gpio_lock, *flags); + spin_unlock_irqrestore(&nw_gpio_lock, *flags); } static inline void netwinder_set_fan(int i) { unsigned long flags; - spin_lock_irqsave(&gpio_lock, flags); - gpio_modify_op(GPIO_FAN, i ? GPIO_FAN : 0); - spin_unlock_irqrestore(&gpio_lock, flags); + spin_lock_irqsave(&nw_gpio_lock, flags); + nw_gpio_modify_op(GPIO_FAN, i ? GPIO_FAN : 0); + spin_unlock_irqrestore(&nw_gpio_lock, flags); } static inline int netwinder_get_fan(void) @@ -96,7 +95,7 @@ static inline int netwinder_get_fan(void) if ((system_rev & 0xf000) == 0x4000) return FAN_ALWAYS_ON; - return (gpio_read() & GPIO_FAN) ? FAN_ON : FAN_OFF; + return (nw_gpio_read() & GPIO_FAN) ? FAN_ON : FAN_OFF; } /* diff --git a/drivers/char/epca.c b/drivers/char/epca.c index cf2461d34e5..af7c13ca949 100644 --- a/drivers/char/epca.c +++ b/drivers/char/epca.c @@ -69,7 +69,9 @@ static int invalid_lilo_config; /* * The ISA boards do window flipping into the same spaces so its only sane with - * a single lock. It's still pretty efficient. + * a single lock. It's still pretty efficient. This lock guards the hardware + * and the tty_port lock guards the kernel side stuff like use counts. Take + * this lock inside the port lock if you must take both. */ static DEFINE_SPINLOCK(epca_lock); @@ -156,14 +158,12 @@ static struct channel *verifyChannel(struct tty_struct *); static void pc_sched_event(struct channel *, int); static void epca_error(int, char *); static void pc_close(struct tty_struct *, struct file *); -static void shutdown(struct channel *); +static void shutdown(struct channel *, struct tty_struct *tty); static void pc_hangup(struct tty_struct *); static int pc_write_room(struct tty_struct *); static int pc_chars_in_buffer(struct tty_struct *); static void pc_flush_buffer(struct tty_struct *); static void pc_flush_chars(struct tty_struct *); -static int block_til_ready(struct tty_struct *, struct file *, - struct channel *); static int pc_open(struct tty_struct *, struct file *); static void post_fep_init(unsigned int crd); static void epcapoll(unsigned long); @@ -173,7 +173,7 @@ static unsigned termios2digi_h(struct channel *ch, unsigned); static unsigned termios2digi_i(struct channel *ch, unsigned); static unsigned termios2digi_c(struct channel *ch, unsigned); static void epcaparam(struct tty_struct *, struct channel *); -static void receive_data(struct channel *); +static void receive_data(struct channel *, struct tty_struct *tty); static int pc_ioctl(struct tty_struct *, struct file *, unsigned int, unsigned long); static int info_ioctl(struct tty_struct *, struct file *, @@ -392,7 +392,7 @@ static struct channel *verifyChannel(struct tty_struct *tty) * through tty->driver_data this should catch it. */ if (tty) { - struct channel *ch = (struct channel *)tty->driver_data; + struct channel *ch = tty->driver_data; if (ch >= &digi_channels[0] && ch < &digi_channels[nbdevs]) { if (ch->magic == EPCA_MAGIC) return ch; @@ -419,76 +419,34 @@ static void epca_error(int line, char *msg) static void pc_close(struct tty_struct *tty, struct file *filp) { struct channel *ch; - unsigned long flags; + struct tty_port *port; /* * verifyChannel returns the channel from the tty struct if it is * valid. This serves as a sanity check. */ ch = verifyChannel(tty); - if (ch != NULL) { - spin_lock_irqsave(&epca_lock, flags); - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&epca_lock, flags); - return; - } - if (ch->port.count-- > 1) { - /* Begin channel is open more than once */ - /* - * Return without doing anything. Someone might still - * be using the channel. - */ - spin_unlock_irqrestore(&epca_lock, flags); - return; - } - /* Port open only once go ahead with shutdown & reset */ - BUG_ON(ch->port.count < 0); - - /* - * Let the rest of the driver know the channel is being closed. - * This becomes important if an open is attempted before close - * is finished. - */ - ch->port.flags |= ASYNC_CLOSING; - tty->closing = 1; - - spin_unlock_irqrestore(&epca_lock, flags); - - if (ch->port.flags & ASYNC_INITIALIZED) { - /* Setup an event to indicate when the - transmit buffer empties */ - setup_empty_event(tty, ch); - /* 30 seconds timeout */ - tty_wait_until_sent(tty, 3000); - } - pc_flush_buffer(tty); + if (ch == NULL) + return; + port = &ch->port; - tty_ldisc_flush(tty); - shutdown(ch); + if (tty_port_close_start(port, tty, filp) == 0) + return; - spin_lock_irqsave(&epca_lock, flags); - tty->closing = 0; - ch->event = 0; - ch->port.tty = NULL; - spin_unlock_irqrestore(&epca_lock, flags); + pc_flush_buffer(tty); + shutdown(ch, tty); - if (ch->port.blocked_open) { - if (ch->close_delay) - msleep_interruptible(jiffies_to_msecs(ch->close_delay)); - wake_up_interruptible(&ch->port.open_wait); - } - ch->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_INITIALIZED | - ASYNC_CLOSING); - wake_up_interruptible(&ch->port.close_wait); - } + tty_port_close_end(port, tty); + ch->event = 0; /* FIXME: review ch->event locking */ + tty_port_tty_set(port, NULL); } -static void shutdown(struct channel *ch) +static void shutdown(struct channel *ch, struct tty_struct *tty) { unsigned long flags; - struct tty_struct *tty; struct board_chan __iomem *bc; + struct tty_port *port = &ch->port; - if (!(ch->port.flags & ASYNC_INITIALIZED)) + if (!(port->flags & ASYNC_INITIALIZED)) return; spin_lock_irqsave(&epca_lock, flags); @@ -503,7 +461,6 @@ static void shutdown(struct channel *ch) */ if (bc) writeb(0, &bc->idata); - tty = ch->port.tty; /* If we're a modem control device and HUPCL is on, drop RTS & DTR. */ if (tty->termios->c_cflag & HUPCL) { @@ -517,32 +474,26 @@ static void shutdown(struct channel *ch) * will have to reinitialized. Set a flag to indicate this. */ /* Prevent future Digi programmed interrupts from coming active */ - ch->port.flags &= ~ASYNC_INITIALIZED; + port->flags &= ~ASYNC_INITIALIZED; spin_unlock_irqrestore(&epca_lock, flags); } static void pc_hangup(struct tty_struct *tty) { struct channel *ch; + /* * verifyChannel returns the channel from the tty struct if it is * valid. This serves as a sanity check. */ ch = verifyChannel(tty); if (ch != NULL) { - unsigned long flags; - pc_flush_buffer(tty); tty_ldisc_flush(tty); - shutdown(ch); + shutdown(ch, tty); - spin_lock_irqsave(&epca_lock, flags); - ch->port.tty = NULL; - ch->event = 0; - ch->port.count = 0; - ch->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_INITIALIZED); - spin_unlock_irqrestore(&epca_lock, flags); - wake_up_interruptible(&ch->port.open_wait); + ch->event = 0; /* FIXME: review locking of ch->event */ + tty_port_hangup(&ch->port); } } @@ -786,100 +737,22 @@ static void pc_flush_chars(struct tty_struct *tty) } } -static int block_til_ready(struct tty_struct *tty, - struct file *filp, struct channel *ch) +static int epca_carrier_raised(struct tty_port *port) { - DECLARE_WAITQUEUE(wait, current); - int retval, do_clocal = 0; - unsigned long flags; - - if (tty_hung_up_p(filp)) { - if (ch->port.flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; - return retval; - } - - /* - * If the device is in the middle of being closed, then block until - * it's done, and then try again. - */ - if (ch->port.flags & ASYNC_CLOSING) { - interruptible_sleep_on(&ch->port.close_wait); - - if (ch->port.flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - else - return -ERESTARTSYS; - } - - if (filp->f_flags & O_NONBLOCK) { - /* - * If non-blocking mode is set, then make the check up front - * and then exit. - */ - ch->port.flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - if (tty->termios->c_cflag & CLOCAL) - do_clocal = 1; - /* Block waiting for the carrier detect and the line to become free */ - - retval = 0; - add_wait_queue(&ch->port.open_wait, &wait); - - spin_lock_irqsave(&epca_lock, flags); - /* We dec count so that pc_close will know when to free things */ - if (!tty_hung_up_p(filp)) - ch->port.count--; - ch->port.blocked_open++; - while (1) { - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || - !(ch->port.flags & ASYNC_INITIALIZED)) { - if (ch->port.flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; - break; - } - if (!(ch->port.flags & ASYNC_CLOSING) && - (do_clocal || (ch->imodem & ch->dcd))) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - spin_unlock_irqrestore(&epca_lock, flags); - /* - * Allow someone else to be scheduled. We will occasionally go - * through this loop until one of the above conditions change. - * The below schedule call will allow other processes to enter - * and prevent this loop from hogging the cpu. - */ - schedule(); - spin_lock_irqsave(&epca_lock, flags); - } - - __set_current_state(TASK_RUNNING); - remove_wait_queue(&ch->port.open_wait, &wait); - if (!tty_hung_up_p(filp)) - ch->port.count++; - ch->port.blocked_open--; - - spin_unlock_irqrestore(&epca_lock, flags); - - if (retval) - return retval; - - ch->port.flags |= ASYNC_NORMAL_ACTIVE; + struct channel *ch = container_of(port, struct channel, port); + if (ch->imodem & ch->dcd) + return 1; return 0; } +static void epca_raise_dtr_rts(struct tty_port *port) +{ +} + static int pc_open(struct tty_struct *tty, struct file *filp) { struct channel *ch; + struct tty_port *port; unsigned long flags; int line, retval, boardnum; struct board_chan __iomem *bc; @@ -890,12 +763,13 @@ static int pc_open(struct tty_struct *tty, struct file *filp) return -ENODEV; ch = &digi_channels[line]; + port = &ch->port; boardnum = ch->boardnum; /* Check status of board configured in system. */ /* - * I check to see if the epca_setup routine detected an user error. It + * I check to see if the epca_setup routine detected a user error. It * might be better to put this in pc_init, but for the moment it goes * here. */ @@ -926,22 +800,24 @@ static int pc_open(struct tty_struct *tty, struct file *filp) return -ENODEV; } - spin_lock_irqsave(&epca_lock, flags); + spin_lock_irqsave(&port->lock, flags); /* * Every time a channel is opened, increment a counter. This is * necessary because we do not wish to flush and shutdown the channel * until the last app holding the channel open, closes it. */ - ch->port.count++; + port->count++; /* * Set a kernel structures pointer to our local channel structure. This * way we can get to it when passed only a tty struct. */ tty->driver_data = ch; + port->tty = tty; /* * If this is the first time the channel has been opened, initialize * the tty->termios struct otherwise let pc_close handle it. */ + spin_lock(&epca_lock); globalwinon(ch); ch->statusflags = 0; @@ -956,31 +832,33 @@ static int pc_open(struct tty_struct *tty, struct file *filp) writew(head, &bc->rout); /* Set the channels associated tty structure */ - ch->port.tty = tty; /* * The below routine generally sets up parity, baud, flow control * issues, etc.... It effect both control flags and input flags. */ epcaparam(tty, ch); - ch->port.flags |= ASYNC_INITIALIZED; memoff(ch); - spin_unlock_irqrestore(&epca_lock, flags); + spin_unlock(&epca_lock); + port->flags |= ASYNC_INITIALIZED; + spin_unlock_irqrestore(&port->lock, flags); - retval = block_til_ready(tty, filp, ch); + retval = tty_port_block_til_ready(port, tty, filp); if (retval) return retval; /* * Set this again in case a hangup set it to zero while this open() was * waiting for the line... */ - spin_lock_irqsave(&epca_lock, flags); - ch->port.tty = tty; + spin_lock_irqsave(&port->lock, flags); + port->tty = tty; + spin_lock(&epca_lock); globalwinon(ch); /* Enable Digi Data events */ writeb(1, &bc->idata); memoff(ch); - spin_unlock_irqrestore(&epca_lock, flags); + spin_unlock(&epca_lock); + spin_unlock_irqrestore(&port->lock, flags); return 0; } @@ -1016,8 +894,11 @@ static void __exit epca_module_exit(void) } ch = card_ptr[crd]; for (count = 0; count < bd->numports; count++, ch++) { - if (ch && ch->port.tty) - tty_hangup(ch->port.tty); + struct tty_struct *tty = tty_port_tty_get(&ch->port); + if (tty) { + tty_hangup(tty); + tty_kref_put(tty); + } } } pci_unregister_driver(&epca_driver); @@ -1042,6 +923,11 @@ static const struct tty_operations pc_ops = { .break_ctl = pc_send_break }; +static const struct tty_port_operations epca_port_ops = { + .carrier_raised = epca_carrier_raised, + .raise_dtr_rts = epca_raise_dtr_rts, +}; + static int info_open(struct tty_struct *tty, struct file *filp) { return 0; @@ -1377,6 +1263,7 @@ static void post_fep_init(unsigned int crd) u16 tseg, rseg; tty_port_init(&ch->port); + ch->port.ops = &epca_port_ops; ch->brdchan = bc; ch->mailbox = gd; INIT_WORK(&ch->tqueue, do_softint); @@ -1428,7 +1315,7 @@ static void post_fep_init(unsigned int crd) ch->boardnum = crd; ch->channelnum = i; ch->magic = EPCA_MAGIC; - ch->port.tty = NULL; + tty_port_tty_set(&ch->port, NULL); if (shrinkmem) { fepcmd(ch, SETBUFFER, 32, 0, 0, 0); @@ -1510,7 +1397,7 @@ static void post_fep_init(unsigned int crd) ch->fepstartca = 0; ch->fepstopca = 0; - ch->close_delay = 50; + ch->port.close_delay = 50; spin_unlock_irqrestore(&epca_lock, flags); } @@ -1622,15 +1509,16 @@ static void doevent(int crd) if (bc == NULL) goto next; + tty = tty_port_tty_get(&ch->port); if (event & DATA_IND) { /* Begin DATA_IND */ - receive_data(ch); + receive_data(ch, tty); assertgwinon(ch); } /* End DATA_IND */ /* else *//* Fix for DCD transition missed bug */ if (event & MODEMCHG_IND) { /* A modem signal change has been indicated */ ch->imodem = mstat; - if (ch->port.flags & ASYNC_CHECK_CD) { + if (test_bit(ASYNC_CHECK_CD, &ch->port.flags)) { /* We are now receiving dcd */ if (mstat & ch->dcd) wake_up_interruptible(&ch->port.open_wait); @@ -1638,7 +1526,6 @@ static void doevent(int crd) pc_sched_event(ch, EPCA_EVENT_HANGUP); } } - tty = ch->port.tty; if (tty) { if (event & BREAK_IND) { /* A break has been indicated */ @@ -1658,6 +1545,7 @@ static void doevent(int crd) tty_wakeup(tty); } } + tty_kref_put(tty); } next: globalwinon(ch); @@ -1877,9 +1765,9 @@ static void epcaparam(struct tty_struct *tty, struct channel *ch) * that the driver will wait on carrier detect. */ if (ts->c_cflag & CLOCAL) - ch->port.flags &= ~ASYNC_CHECK_CD; + clear_bit(ASYNC_CHECK_CD, &ch->port.flags); else - ch->port.flags |= ASYNC_CHECK_CD; + set_bit(ASYNC_CHECK_CD, &ch->port.flags); mval = ch->m_dtr | ch->m_rts; } /* End CBAUD not detected */ iflag = termios2digi_i(ch, ts->c_iflag); @@ -1952,11 +1840,10 @@ static void epcaparam(struct tty_struct *tty, struct channel *ch) } /* Caller holds lock */ -static void receive_data(struct channel *ch) +static void receive_data(struct channel *ch, struct tty_struct *tty) { unchar *rptr; struct ktermios *ts = NULL; - struct tty_struct *tty; struct board_chan __iomem *bc; int dataToRead, wrapgap, bytesAvailable; unsigned int tail, head; @@ -1969,7 +1856,6 @@ static void receive_data(struct channel *ch) globalwinon(ch); if (ch->statusflags & RXSTOPPED) return; - tty = ch->port.tty; if (tty) ts = tty->termios; bc = ch->brdchan; @@ -2029,7 +1915,7 @@ static void receive_data(struct channel *ch) globalwinon(ch); writew(tail, &bc->rout); /* Must be called with global data */ - tty_schedule_flip(ch->port.tty); + tty_schedule_flip(tty); } static int info_ioctl(struct tty_struct *tty, struct file *file, @@ -2097,7 +1983,7 @@ static int info_ioctl(struct tty_struct *tty, struct file *file, static int pc_tiocmget(struct tty_struct *tty, struct file *file) { - struct channel *ch = (struct channel *) tty->driver_data; + struct channel *ch = tty->driver_data; struct board_chan __iomem *bc; unsigned int mstat, mflag = 0; unsigned long flags; @@ -2131,7 +2017,7 @@ static int pc_tiocmget(struct tty_struct *tty, struct file *file) static int pc_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - struct channel *ch = (struct channel *) tty->driver_data; + struct channel *ch = tty->driver_data; unsigned long flags; if (!ch) @@ -2178,7 +2064,7 @@ static int pc_ioctl(struct tty_struct *tty, struct file *file, unsigned int mflag, mstat; unsigned char startc, stopc; struct board_chan __iomem *bc; - struct channel *ch = (struct channel *) tty->driver_data; + struct channel *ch = tty->driver_data; void __user *argp = (void __user *)arg; if (ch) @@ -2352,15 +2238,16 @@ static void do_softint(struct work_struct *work) struct channel *ch = container_of(work, struct channel, tqueue); /* Called in response to a modem change event */ if (ch && ch->magic == EPCA_MAGIC) { - struct tty_struct *tty = ch->port.tty; + struct tty_struct *tty = tty_port_tty_get(&ch->port);; if (tty && tty->driver_data) { if (test_and_clear_bit(EPCA_EVENT_HANGUP, &ch->event)) { tty_hangup(tty); wake_up_interruptible(&ch->port.open_wait); - ch->port.flags &= ~ASYNC_NORMAL_ACTIVE; + clear_bit(ASYNC_NORMAL_ACTIVE, &ch->port.flags); } } + tty_kref_put(tty); } } @@ -2473,7 +2360,7 @@ static void pc_unthrottle(struct tty_struct *tty) static int pc_send_break(struct tty_struct *tty, int msec) { - struct channel *ch = (struct channel *) tty->driver_data; + struct channel *ch = tty->driver_data; unsigned long flags; if (msec == -1) diff --git a/drivers/char/esp.c b/drivers/char/esp.c index 7f077c0097f..45ec263ec01 100644 --- a/drivers/char/esp.c +++ b/drivers/char/esp.c @@ -2054,6 +2054,15 @@ static void esp_hangup(struct tty_struct *tty) wake_up_interruptible(&info->port.open_wait); } +static int esp_carrier_raised(struct tty_port *port) +{ + struct esp_struct *info = container_of(port, struct esp_struct, port); + serial_out(info, UART_ESI_CMD1, ESI_GET_UART_STAT); + if (serial_in(info, UART_ESI_STAT2) & UART_MSR_DCD) + return 1; + return 0; +} + /* * ------------------------------------------------------------ * esp_open() and friends @@ -2066,17 +2075,19 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, int retval; int do_clocal = 0; unsigned long flags; + int cd; + struct tty_port *port = &info->port; /* * If the device is in the middle of being closed, then block * until it's done, and then try again. */ if (tty_hung_up_p(filp) || - (info->port.flags & ASYNC_CLOSING)) { - if (info->port.flags & ASYNC_CLOSING) - interruptible_sleep_on(&info->port.close_wait); + (port->flags & ASYNC_CLOSING)) { + if (port->flags & ASYNC_CLOSING) + interruptible_sleep_on(&port->close_wait); #ifdef SERIAL_DO_RESTART - if (info->port.flags & ASYNC_HUP_NOTIFY) + if (port->flags & ASYNC_HUP_NOTIFY) return -EAGAIN; else return -ERESTARTSYS; @@ -2091,7 +2102,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, */ if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) { - info->port.flags |= ASYNC_NORMAL_ACTIVE; + port->flags |= ASYNC_NORMAL_ACTIVE; return 0; } @@ -2101,20 +2112,20 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, /* * Block waiting for the carrier detect and the line to become * free (i.e., not in use by the callout). While we are in - * this loop, info->port.count is dropped by one, so that + * this loop, port->count is dropped by one, so that * rs_close() knows when to free things. We restore it upon * exit, either normal or abnormal. */ retval = 0; - add_wait_queue(&info->port.open_wait, &wait); + add_wait_queue(&port->open_wait, &wait); #ifdef SERIAL_DEBUG_OPEN printk(KERN_DEBUG "block_til_ready before block: ttys%d, count = %d\n", - info->line, info->port.count); + info->line, port->count); #endif spin_lock_irqsave(&info->lock, flags); if (!tty_hung_up_p(filp)) - info->port.count--; - info->port.blocked_open++; + port->count--; + port->blocked_open++; while (1) { if ((tty->termios->c_cflag & CBAUD)) { unsigned int scratch; @@ -2129,9 +2140,9 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, } set_current_state(TASK_INTERRUPTIBLE); if (tty_hung_up_p(filp) || - !(info->port.flags & ASYNC_INITIALIZED)) { + !(port->flags & ASYNC_INITIALIZED)) { #ifdef SERIAL_DO_RESTART - if (info->port.flags & ASYNC_HUP_NOTIFY) + if (port->flags & ASYNC_HUP_NOTIFY) retval = -EAGAIN; else retval = -ERESTARTSYS; @@ -2141,11 +2152,9 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, break; } - serial_out(info, UART_ESI_CMD1, ESI_GET_UART_STAT); - if (serial_in(info, UART_ESI_STAT2) & UART_MSR_DCD) - do_clocal = 1; + cd = tty_port_carrier_raised(port); - if (!(info->port.flags & ASYNC_CLOSING) && + if (!(port->flags & ASYNC_CLOSING) && (do_clocal)) break; if (signal_pending(current)) { @@ -2154,25 +2163,25 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, } #ifdef SERIAL_DEBUG_OPEN printk(KERN_DEBUG "block_til_ready blocking: ttys%d, count = %d\n", - info->line, info->port.count); + info->line, port->count); #endif spin_unlock_irqrestore(&info->lock, flags); schedule(); spin_lock_irqsave(&info->lock, flags); } set_current_state(TASK_RUNNING); - remove_wait_queue(&info->port.open_wait, &wait); + remove_wait_queue(&port->open_wait, &wait); if (!tty_hung_up_p(filp)) - info->port.count++; - info->port.blocked_open--; + port->count++; + port->blocked_open--; spin_unlock_irqrestore(&info->lock, flags); #ifdef SERIAL_DEBUG_OPEN printk(KERN_DEBUG "block_til_ready after blocking: ttys%d, count = %d\n", - info->line, info->port.count); + info->line, port->count); #endif if (retval) return retval; - info->port.flags |= ASYNC_NORMAL_ACTIVE; + port->flags |= ASYNC_NORMAL_ACTIVE; return 0; } @@ -2329,6 +2338,10 @@ static const struct tty_operations esp_ops = { .tiocmset = esp_tiocmset, }; +static const struct tty_port_operations esp_port_ops = { + .esp_carrier_raised, +}; + /* * The serial driver boot-time initialization code! */ @@ -2415,6 +2428,8 @@ static int __init espserial_init(void) offset = 0; do { + tty_port_init(&info->port); + info->port.ops = &esp_port_ops; info->io_port = esp[i] + offset; info->irq = irq[i]; info->line = (i * 8) + (offset / 8); @@ -2437,8 +2452,6 @@ static int __init espserial_init(void) info->config.flow_off = flow_off; info->config.pio_threshold = pio_threshold; info->next_port = ports; - init_waitqueue_head(&info->port.open_wait); - init_waitqueue_head(&info->port.close_wait); init_waitqueue_head(&info->delta_msr_wait); init_waitqueue_head(&info->break_wait); ports = info; diff --git a/drivers/char/generic_serial.c b/drivers/char/generic_serial.c index c6090f84a2e..9e4e569dc00 100644 --- a/drivers/char/generic_serial.c +++ b/drivers/char/generic_serial.c @@ -376,7 +376,8 @@ static void gs_shutdown_port (struct gs_port *port) void gs_hangup(struct tty_struct *tty) { - struct gs_port *port; + struct gs_port *port; + unsigned long flags; func_enter (); @@ -386,9 +387,11 @@ void gs_hangup(struct tty_struct *tty) return; gs_shutdown_port (port); + spin_lock_irqsave(&port->port.lock, flags); port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|GS_ACTIVE); port->port.tty = NULL; port->port.count = 0; + spin_unlock_irqrestore(&port->port.lock, flags); wake_up_interruptible(&port->port.open_wait); func_exit (); @@ -397,7 +400,8 @@ void gs_hangup(struct tty_struct *tty) int gs_block_til_ready(void *port_, struct file * filp) { - struct gs_port *port = port_; + struct gs_port *gp = port_; + struct tty_port *port = &gp->port; DECLARE_WAITQUEUE(wait, current); int retval; int do_clocal = 0; @@ -409,16 +413,16 @@ int gs_block_til_ready(void *port_, struct file * filp) if (!port) return 0; - tty = port->port.tty; + tty = port->tty; gs_dprintk (GS_DEBUG_BTR, "Entering gs_block_till_ready.\n"); /* * If the device is in the middle of being closed, then block * until it's done, and then try again. */ - if (tty_hung_up_p(filp) || port->port.flags & ASYNC_CLOSING) { - interruptible_sleep_on(&port->port.close_wait); - if (port->port.flags & ASYNC_HUP_NOTIFY) + if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) { + interruptible_sleep_on(&port->close_wait); + if (port->flags & ASYNC_HUP_NOTIFY) return -EAGAIN; else return -ERESTARTSYS; @@ -432,7 +436,7 @@ int gs_block_til_ready(void *port_, struct file * filp) */ if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) { - port->port.flags |= ASYNC_NORMAL_ACTIVE; + port->flags |= ASYNC_NORMAL_ACTIVE; return 0; } @@ -444,34 +448,34 @@ int gs_block_til_ready(void *port_, struct file * filp) /* * Block waiting for the carrier detect and the line to become * free (i.e., not in use by the callout). While we are in - * this loop, port->port.count is dropped by one, so that + * this loop, port->count is dropped by one, so that * rs_close() knows when to free things. We restore it upon * exit, either normal or abnormal. */ retval = 0; - add_wait_queue(&port->port.open_wait, &wait); + add_wait_queue(&port->open_wait, &wait); gs_dprintk (GS_DEBUG_BTR, "after add waitq.\n"); - spin_lock_irqsave(&port->driver_lock, flags); + spin_lock_irqsave(&port->lock, flags); if (!tty_hung_up_p(filp)) { - port->port.count--; + port->count--; } - spin_unlock_irqrestore(&port->driver_lock, flags); - port->port.blocked_open++; + port->blocked_open++; + spin_unlock_irqrestore(&port->lock, flags); while (1) { - CD = port->rd->get_CD (port); + CD = tty_port_carrier_raised(port); gs_dprintk (GS_DEBUG_BTR, "CD is now %d.\n", CD); set_current_state (TASK_INTERRUPTIBLE); if (tty_hung_up_p(filp) || - !(port->port.flags & ASYNC_INITIALIZED)) { - if (port->port.flags & ASYNC_HUP_NOTIFY) + !(port->flags & ASYNC_INITIALIZED)) { + if (port->flags & ASYNC_HUP_NOTIFY) retval = -EAGAIN; else retval = -ERESTARTSYS; break; } - if (!(port->port.flags & ASYNC_CLOSING) && + if (!(port->flags & ASYNC_CLOSING) && (do_clocal || CD)) break; gs_dprintk (GS_DEBUG_BTR, "signal_pending is now: %d (%lx)\n", @@ -483,19 +487,20 @@ int gs_block_til_ready(void *port_, struct file * filp) schedule(); } gs_dprintk (GS_DEBUG_BTR, "Got out of the loop. (%d)\n", - port->port.blocked_open); + port->blocked_open); set_current_state (TASK_RUNNING); - remove_wait_queue(&port->port.open_wait, &wait); + remove_wait_queue(&port->open_wait, &wait); + + spin_lock_irqsave(&port->lock, flags); if (!tty_hung_up_p(filp)) { - port->port.count++; + port->count++; } - port->port.blocked_open--; - if (retval) - return retval; - - port->port.flags |= ASYNC_NORMAL_ACTIVE; + port->blocked_open--; + if (retval == 0) + port->flags |= ASYNC_NORMAL_ACTIVE; + spin_unlock_irqrestore(&port->lock, flags); func_exit (); - return 0; + return retval; } @@ -506,7 +511,7 @@ void gs_close(struct tty_struct * tty, struct file * filp) func_enter (); - port = (struct gs_port *) tty->driver_data; + port = tty->driver_data; if (!port) return; @@ -516,10 +521,10 @@ void gs_close(struct tty_struct * tty, struct file * filp) port->port.tty = tty; } - spin_lock_irqsave(&port->driver_lock, flags); + spin_lock_irqsave(&port->port.lock, flags); if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&port->driver_lock, flags); + spin_unlock_irqrestore(&port->port.lock, flags); if (port->rd->hungup) port->rd->hungup (port); func_exit (); @@ -538,7 +543,7 @@ void gs_close(struct tty_struct * tty, struct file * filp) if (port->port.count) { gs_dprintk(GS_DEBUG_CLOSE, "gs_close port %p: count: %d\n", port, port->port.count); - spin_unlock_irqrestore(&port->driver_lock, flags); + spin_unlock_irqrestore(&port->port.lock, flags); func_exit (); return; } @@ -559,8 +564,10 @@ void gs_close(struct tty_struct * tty, struct file * filp) * line status register. */ + spin_lock_irqsave(&port->driver_lock, flags); port->rd->disable_rx_interrupts (port); spin_unlock_irqrestore(&port->driver_lock, flags); + spin_unlock_irqrestore(&port->port.lock, flags); /* close has no way of returning "EINTR", so discard return value */ if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) @@ -573,20 +580,25 @@ void gs_close(struct tty_struct * tty, struct file * filp) tty_ldisc_flush(tty); tty->closing = 0; + spin_lock_irqsave(&port->driver_lock, flags); port->event = 0; port->rd->close (port); port->rd->shutdown_port (port); + spin_unlock_irqrestore(&port->driver_lock, flags); + + spin_lock_irqsave(&port->port.lock, flags); port->port.tty = NULL; if (port->port.blocked_open) { if (port->close_delay) { - spin_unlock_irqrestore(&port->driver_lock, flags); + spin_unlock_irqrestore(&port->port.lock, flags); msleep_interruptible(jiffies_to_msecs(port->close_delay)); - spin_lock_irqsave(&port->driver_lock, flags); + spin_lock_irqsave(&port->port.lock, flags); } wake_up_interruptible(&port->port.open_wait); } port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING | ASYNC_INITIALIZED); + spin_unlock_irqrestore(&port->port.lock, flags); wake_up_interruptible(&port->port.close_wait); func_exit (); diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c index 53fdc7ff387..32b8bbf5003 100644 --- a/drivers/char/hpet.c +++ b/drivers/char/hpet.c @@ -46,7 +46,7 @@ /* * The High Precision Event Timer driver. * This driver is closely modelled after the rtc.c driver. - * http://www.intel.com/hardwaredesign/hpetspec.htm + * http://www.intel.com/hardwaredesign/hpetspec_1.pdf */ #define HPET_USER_FREQ (64) #define HPET_DRIFT (500) diff --git a/drivers/char/hvc_beat.c b/drivers/char/hvc_beat.c index 91cdb35a920..0afc8b82212 100644 --- a/drivers/char/hvc_beat.c +++ b/drivers/char/hvc_beat.c @@ -44,7 +44,7 @@ static int hvc_beat_get_chars(uint32_t vtermno, char *buf, int cnt) static unsigned char q[sizeof(unsigned long) * 2] __attribute__((aligned(sizeof(unsigned long)))); static int qlen = 0; - unsigned long got; + u64 got; again: if (qlen) { @@ -63,7 +63,7 @@ again: } } if (beat_get_term_char(vtermno, &got, - ((unsigned long *)q), ((unsigned long *)q) + 1) == 0) { + ((u64 *)q), ((u64 *)q) + 1) == 0) { qlen = got; goto again; } diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c index 5b819b12675..5a8a4c28c86 100644 --- a/drivers/char/hvc_console.c +++ b/drivers/char/hvc_console.c @@ -529,7 +529,7 @@ static void hvc_set_winsz(struct work_struct *work) tty = tty_kref_get(hp->tty); spin_unlock_irqrestore(&hp->lock, hvc_flags); - tty_do_resize(tty, tty, &ws); + tty_do_resize(tty, &ws); tty_kref_put(tty); } @@ -642,8 +642,11 @@ int hvc_poll(struct hvc_struct *hp) /* Handle the SysRq Hack */ /* XXX should support a sequence */ if (buf[i] == '\x0f') { /* ^O */ - sysrq_pressed = 1; - continue; + /* if ^O is pressed again, reset + * sysrq_pressed and flip ^O char */ + sysrq_pressed = !sysrq_pressed; + if (sysrq_pressed) + continue; } else if (sysrq_pressed) { handle_sysrq(buf[i], tty); sysrq_pressed = 0; @@ -689,11 +692,10 @@ EXPORT_SYMBOL_GPL(hvc_poll); */ void hvc_resize(struct hvc_struct *hp, struct winsize ws) { - if ((hp->ws.ws_row != ws.ws_row) || (hp->ws.ws_col != ws.ws_col)) { - hp->ws = ws; - schedule_work(&hp->tty_resize); - } + hp->ws = ws; + schedule_work(&hp->tty_resize); } +EXPORT_SYMBOL_GPL(hvc_resize); /* * This kthread is either polling or interrupt driven. This is determined by diff --git a/drivers/char/hvc_console.h b/drivers/char/hvc_console.h index 8297dbc2e6e..3c85d78c975 100644 --- a/drivers/char/hvc_console.h +++ b/drivers/char/hvc_console.h @@ -48,7 +48,7 @@ struct hvc_struct { spinlock_t lock; int index; struct tty_struct *tty; - unsigned int count; + int count; int do_wakeup; char *outbuf; int outbuf_size; diff --git a/drivers/char/hvc_iseries.c b/drivers/char/hvc_iseries.c index b74a2f8ab90..449727b6166 100644 --- a/drivers/char/hvc_iseries.c +++ b/drivers/char/hvc_iseries.c @@ -575,8 +575,10 @@ static int __init hvc_find_vtys(void) * of console adapters. */ if ((num_found >= MAX_NR_HVC_CONSOLES) || - (num_found >= VTTY_PORTS)) + (num_found >= VTTY_PORTS)) { + of_node_put(vty); break; + } vtermno = of_get_property(vty, "reg", NULL); if (!vtermno) diff --git a/drivers/char/hvc_iucv.c b/drivers/char/hvc_iucv.c new file mode 100644 index 00000000000..5ea7d7713fc --- /dev/null +++ b/drivers/char/hvc_iucv.c @@ -0,0 +1,850 @@ +/* + * hvc_iucv.c - z/VM IUCV back-end for the Hypervisor Console (HVC) + * + * This back-end for HVC provides terminal access via + * z/VM IUCV communication paths. + * + * Copyright IBM Corp. 2008. + * + * Author(s): Hendrik Brueckner <brueckner@linux.vnet.ibm.com> + */ +#define KMSG_COMPONENT "hvc_iucv" + +#include <linux/types.h> +#include <asm/ebcdic.h> +#include <linux/mempool.h> +#include <linux/module.h> +#include <linux/tty.h> +#include <net/iucv/iucv.h> + +#include "hvc_console.h" + + +/* HVC backend for z/VM IUCV */ +#define HVC_IUCV_MAGIC 0xc9e4c3e5 +#define MAX_HVC_IUCV_LINES HVC_ALLOC_TTY_ADAPTERS +#define MEMPOOL_MIN_NR (PAGE_SIZE / sizeof(struct iucv_tty_buffer)/4) + +/* IUCV TTY message */ +#define MSG_VERSION 0x02 /* Message version */ +#define MSG_TYPE_ERROR 0x01 /* Error message */ +#define MSG_TYPE_TERMENV 0x02 /* Terminal environment variable */ +#define MSG_TYPE_TERMIOS 0x04 /* Terminal IO struct update */ +#define MSG_TYPE_WINSIZE 0x08 /* Terminal window size update */ +#define MSG_TYPE_DATA 0x10 /* Terminal data */ + +#define MSG_SIZE(s) ((s) + offsetof(struct iucv_tty_msg, data)) +struct iucv_tty_msg { + u8 version; /* Message version */ + u8 type; /* Message type */ +#define MSG_MAX_DATALEN (~(u16)0) + u16 datalen; /* Payload length */ + u8 data[]; /* Payload buffer */ +} __attribute__((packed)); + +enum iucv_state_t { + IUCV_DISCONN = 0, + IUCV_CONNECTED = 1, + IUCV_SEVERED = 2, +}; + +enum tty_state_t { + TTY_CLOSED = 0, + TTY_OPENED = 1, +}; + +struct hvc_iucv_private { + struct hvc_struct *hvc; /* HVC console struct reference */ + u8 srv_name[8]; /* IUCV service name (ebcdic) */ + enum iucv_state_t iucv_state; /* IUCV connection status */ + enum tty_state_t tty_state; /* TTY status */ + struct iucv_path *path; /* IUCV path pointer */ + spinlock_t lock; /* hvc_iucv_private lock */ + struct list_head tty_outqueue; /* outgoing IUCV messages */ + struct list_head tty_inqueue; /* incoming IUCV messages */ +}; + +struct iucv_tty_buffer { + struct list_head list; /* list pointer */ + struct iucv_message msg; /* store an incoming IUCV message */ + size_t offset; /* data buffer offset */ + struct iucv_tty_msg *mbuf; /* buffer to store input/output data */ +}; + +/* IUCV callback handler */ +static int hvc_iucv_path_pending(struct iucv_path *, u8[8], u8[16]); +static void hvc_iucv_path_severed(struct iucv_path *, u8[16]); +static void hvc_iucv_msg_pending(struct iucv_path *, struct iucv_message *); +static void hvc_iucv_msg_complete(struct iucv_path *, struct iucv_message *); + + +/* Kernel module parameters */ +static unsigned long hvc_iucv_devices; + +/* Array of allocated hvc iucv tty lines... */ +static struct hvc_iucv_private *hvc_iucv_table[MAX_HVC_IUCV_LINES]; + +/* Kmem cache and mempool for iucv_tty_buffer elements */ +static struct kmem_cache *hvc_iucv_buffer_cache; +static mempool_t *hvc_iucv_mempool; + +/* IUCV handler callback functions */ +static struct iucv_handler hvc_iucv_handler = { + .path_pending = hvc_iucv_path_pending, + .path_severed = hvc_iucv_path_severed, + .message_complete = hvc_iucv_msg_complete, + .message_pending = hvc_iucv_msg_pending, +}; + + +/** + * hvc_iucv_get_private() - Return a struct hvc_iucv_private instance. + * @num: The HVC virtual terminal number (vtermno) + * + * This function returns the struct hvc_iucv_private instance that corresponds + * to the HVC virtual terminal number specified as parameter @num. + */ +struct hvc_iucv_private *hvc_iucv_get_private(uint32_t num) +{ + if ((num < HVC_IUCV_MAGIC) || (num - HVC_IUCV_MAGIC > hvc_iucv_devices)) + return NULL; + return hvc_iucv_table[num - HVC_IUCV_MAGIC]; +} + +/** + * alloc_tty_buffer() - Returns a new struct iucv_tty_buffer element. + * @size: Size of the internal buffer used to store data. + * @flags: Memory allocation flags passed to mempool. + * + * This function allocates a new struct iucv_tty_buffer element and, optionally, + * allocates an internal data buffer with the specified size @size. + * Note: The total message size arises from the internal buffer size and the + * members of the iucv_tty_msg structure. + * + * The function returns NULL if memory allocation has failed. + */ +static struct iucv_tty_buffer *alloc_tty_buffer(size_t size, gfp_t flags) +{ + struct iucv_tty_buffer *bufp; + + bufp = mempool_alloc(hvc_iucv_mempool, flags); + if (!bufp) + return NULL; + memset(bufp, 0, sizeof(struct iucv_tty_buffer)); + + if (size > 0) { + bufp->msg.length = MSG_SIZE(size); + bufp->mbuf = kmalloc(bufp->msg.length, flags); + if (!bufp->mbuf) { + mempool_free(bufp, hvc_iucv_mempool); + return NULL; + } + bufp->mbuf->version = MSG_VERSION; + bufp->mbuf->type = MSG_TYPE_DATA; + bufp->mbuf->datalen = (u16) size; + } + return bufp; +} + +/** + * destroy_tty_buffer() - destroy struct iucv_tty_buffer element. + * @bufp: Pointer to a struct iucv_tty_buffer element, SHALL NOT be NULL. + * + * The destroy_tty_buffer() function frees the internal data buffer and returns + * the struct iucv_tty_buffer element back to the mempool for freeing. + */ +static void destroy_tty_buffer(struct iucv_tty_buffer *bufp) +{ + kfree(bufp->mbuf); + mempool_free(bufp, hvc_iucv_mempool); +} + +/** + * destroy_tty_buffer_list() - call destroy_tty_buffer() for each list element. + * @list: List head pointer to a list containing struct iucv_tty_buffer + * elements. + * + * Calls destroy_tty_buffer() for each struct iucv_tty_buffer element in the + * list @list. + */ +static void destroy_tty_buffer_list(struct list_head *list) +{ + struct iucv_tty_buffer *ent, *next; + + list_for_each_entry_safe(ent, next, list, list) { + list_del(&ent->list); + destroy_tty_buffer(ent); + } +} + +/** + * hvc_iucv_write() - Receive IUCV message write data to HVC console buffer. + * @priv: Pointer to hvc_iucv_private structure. + * @buf: HVC console buffer for writing received terminal data. + * @count: HVC console buffer size. + * @has_more_data: Pointer to an int variable. + * + * The function picks up pending messages from the input queue and receives + * the message data that is then written to the specified buffer @buf. + * If the buffer size @count is less than the data message size, then the + * message is kept on the input queue and @has_more_data is set to 1. + * If the message data has been entirely written, the message is removed from + * the input queue. + * + * The function returns the number of bytes written to the terminal, zero if + * there are no pending data messages available or if there is no established + * IUCV path. + * If the IUCV path has been severed, then -EPIPE is returned to cause a + * hang up (that is issued by the HVC console layer). + */ +static int hvc_iucv_write(struct hvc_iucv_private *priv, + char *buf, int count, int *has_more_data) +{ + struct iucv_tty_buffer *rb; + int written; + int rc; + + /* Immediately return if there is no IUCV connection */ + if (priv->iucv_state == IUCV_DISCONN) + return 0; + + /* If the IUCV path has been severed, return -EPIPE to inform the + * hvc console layer to hang up the tty device. */ + if (priv->iucv_state == IUCV_SEVERED) + return -EPIPE; + + /* check if there are pending messages */ + if (list_empty(&priv->tty_inqueue)) + return 0; + + /* receive a iucv message and flip data to the tty (ldisc) */ + rb = list_first_entry(&priv->tty_inqueue, struct iucv_tty_buffer, list); + + written = 0; + if (!rb->mbuf) { /* message not yet received ... */ + /* allocate mem to store msg data; if no memory is available + * then leave the buffer on the list and re-try later */ + rb->mbuf = kmalloc(rb->msg.length, GFP_ATOMIC); + if (!rb->mbuf) + return -ENOMEM; + + rc = __iucv_message_receive(priv->path, &rb->msg, 0, + rb->mbuf, rb->msg.length, NULL); + switch (rc) { + case 0: /* Successful */ + break; + case 2: /* No message found */ + case 9: /* Message purged */ + break; + default: + written = -EIO; + } + /* remove buffer if an error has occured or received data + * is not correct */ + if (rc || (rb->mbuf->version != MSG_VERSION) || + (rb->msg.length != MSG_SIZE(rb->mbuf->datalen))) + goto out_remove_buffer; + } + + switch (rb->mbuf->type) { + case MSG_TYPE_DATA: + written = min_t(int, rb->mbuf->datalen - rb->offset, count); + memcpy(buf, rb->mbuf->data + rb->offset, written); + if (written < (rb->mbuf->datalen - rb->offset)) { + rb->offset += written; + *has_more_data = 1; + goto out_written; + } + break; + + case MSG_TYPE_WINSIZE: + if (rb->mbuf->datalen != sizeof(struct winsize)) + break; + hvc_resize(priv->hvc, *((struct winsize *)rb->mbuf->data)); + break; + + case MSG_TYPE_ERROR: /* ignored ... */ + case MSG_TYPE_TERMENV: /* ignored ... */ + case MSG_TYPE_TERMIOS: /* ignored ... */ + break; + } + +out_remove_buffer: + list_del(&rb->list); + destroy_tty_buffer(rb); + *has_more_data = !list_empty(&priv->tty_inqueue); + +out_written: + return written; +} + +/** + * hvc_iucv_get_chars() - HVC get_chars operation. + * @vtermno: HVC virtual terminal number. + * @buf: Pointer to a buffer to store data + * @count: Size of buffer available for writing + * + * The hvc_console thread calls this method to read characters from + * the terminal backend. If an IUCV communication path has been established, + * pending IUCV messages are received and data is copied into buffer @buf + * up to @count bytes. + * + * Locking: The routine gets called under an irqsave() spinlock; and + * the routine locks the struct hvc_iucv_private->lock to call + * helper functions. + */ +static int hvc_iucv_get_chars(uint32_t vtermno, char *buf, int count) +{ + struct hvc_iucv_private *priv = hvc_iucv_get_private(vtermno); + int written; + int has_more_data; + + if (count <= 0) + return 0; + + if (!priv) + return -ENODEV; + + spin_lock(&priv->lock); + has_more_data = 0; + written = hvc_iucv_write(priv, buf, count, &has_more_data); + spin_unlock(&priv->lock); + + /* if there are still messages on the queue... schedule another run */ + if (has_more_data) + hvc_kick(); + + return written; +} + +/** + * hvc_iucv_send() - Send an IUCV message containing terminal data. + * @priv: Pointer to struct hvc_iucv_private instance. + * @buf: Buffer containing data to send. + * @size: Size of buffer and amount of data to send. + * + * If an IUCV communication path is established, the function copies the buffer + * data to a newly allocated struct iucv_tty_buffer element, sends the data and + * puts the element to the outqueue. + * + * If there is no IUCV communication path established, the function returns 0. + * If an existing IUCV communicaton path has been severed, the function returns + * -EPIPE (can be passed to HVC layer to cause a tty hangup). + */ +static int hvc_iucv_send(struct hvc_iucv_private *priv, const char *buf, + int count) +{ + struct iucv_tty_buffer *sb; + int rc; + u16 len; + + if (priv->iucv_state == IUCV_SEVERED) + return -EPIPE; + + if (priv->iucv_state == IUCV_DISCONN) + return 0; + + len = min_t(u16, MSG_MAX_DATALEN, count); + + /* allocate internal buffer to store msg data and also compute total + * message length */ + sb = alloc_tty_buffer(len, GFP_ATOMIC); + if (!sb) + return -ENOMEM; + + sb->mbuf->datalen = len; + memcpy(sb->mbuf->data, buf, len); + + list_add_tail(&sb->list, &priv->tty_outqueue); + + rc = __iucv_message_send(priv->path, &sb->msg, 0, 0, + (void *) sb->mbuf, sb->msg.length); + if (rc) { + list_del(&sb->list); + destroy_tty_buffer(sb); + len = 0; + } + + return len; +} + +/** + * hvc_iucv_put_chars() - HVC put_chars operation. + * @vtermno: HVC virtual terminal number. + * @buf: Pointer to an buffer to read data from + * @count: Size of buffer available for reading + * + * The hvc_console thread calls this method to write characters from + * to the terminal backend. + * The function calls hvc_iucv_send() under the lock of the + * struct hvc_iucv_private instance that corresponds to the tty @vtermno. + * + * Locking: The method gets called under an irqsave() spinlock; and + * locks struct hvc_iucv_private->lock. + */ +static int hvc_iucv_put_chars(uint32_t vtermno, const char *buf, int count) +{ + struct hvc_iucv_private *priv = hvc_iucv_get_private(vtermno); + int sent; + + if (count <= 0) + return 0; + + if (!priv) + return -ENODEV; + + spin_lock(&priv->lock); + sent = hvc_iucv_send(priv, buf, count); + spin_unlock(&priv->lock); + + return sent; +} + +/** + * hvc_iucv_notifier_add() - HVC notifier for opening a TTY for the first time. + * @hp: Pointer to the HVC device (struct hvc_struct) + * @id: Additional data (originally passed to hvc_alloc): the index of an struct + * hvc_iucv_private instance. + * + * The function sets the tty state to TTY_OPEN for the struct hvc_iucv_private + * instance that is derived from @id. Always returns 0. + * + * Locking: struct hvc_iucv_private->lock, spin_lock_bh + */ +static int hvc_iucv_notifier_add(struct hvc_struct *hp, int id) +{ + struct hvc_iucv_private *priv; + + priv = hvc_iucv_get_private(id); + if (!priv) + return 0; + + spin_lock_bh(&priv->lock); + priv->tty_state = TTY_OPENED; + spin_unlock_bh(&priv->lock); + + return 0; +} + +/** + * hvc_iucv_cleanup() - Clean up function if the tty portion is finally closed. + * @priv: Pointer to the struct hvc_iucv_private instance. + * + * The functions severs the established IUCV communication path (if any), and + * destroy struct iucv_tty_buffer elements from the in- and outqueue. Finally, + * the functions resets the states to TTY_CLOSED and IUCV_DISCONN. + */ +static void hvc_iucv_cleanup(struct hvc_iucv_private *priv) +{ + destroy_tty_buffer_list(&priv->tty_outqueue); + destroy_tty_buffer_list(&priv->tty_inqueue); + + priv->tty_state = TTY_CLOSED; + priv->iucv_state = IUCV_DISCONN; +} + +/** + * hvc_iucv_notifier_hangup() - HVC notifier for tty hangups. + * @hp: Pointer to the HVC device (struct hvc_struct) + * @id: Additional data (originally passed to hvc_alloc): the index of an struct + * hvc_iucv_private instance. + * + * This routine notifies the HVC backend that a tty hangup (carrier loss, + * virtual or otherwise) has occured. + * + * The HVC backend for z/VM IUCV ignores virtual hangups (vhangup()), to keep + * an existing IUCV communication path established. + * (Background: vhangup() is called from user space (by getty or login) to + * disable writing to the tty by other applications). + * + * If the tty has been opened (e.g. getty) and an established IUCV path has been + * severed (we caused the tty hangup in that case), then the functions invokes + * hvc_iucv_cleanup() to clean up. + * + * Locking: struct hvc_iucv_private->lock + */ +static void hvc_iucv_notifier_hangup(struct hvc_struct *hp, int id) +{ + struct hvc_iucv_private *priv; + + priv = hvc_iucv_get_private(id); + if (!priv) + return; + + spin_lock_bh(&priv->lock); + /* NOTE: If the hangup was scheduled by ourself (from the iucv + * path_servered callback [IUCV_SEVERED]), then we have to + * finally clean up the tty backend structure and set state to + * TTY_CLOSED. + * + * If the tty was hung up otherwise (e.g. vhangup()), then we + * ignore this hangup and keep an established IUCV path open... + * (...the reason is that we are not able to connect back to the + * client if we disconnect on hang up) */ + priv->tty_state = TTY_CLOSED; + + if (priv->iucv_state == IUCV_SEVERED) + hvc_iucv_cleanup(priv); + spin_unlock_bh(&priv->lock); +} + +/** + * hvc_iucv_notifier_del() - HVC notifier for closing a TTY for the last time. + * @hp: Pointer to the HVC device (struct hvc_struct) + * @id: Additional data (originally passed to hvc_alloc): + * the index of an struct hvc_iucv_private instance. + * + * This routine notifies the HVC backend that the last tty device file + * descriptor has been closed. + * The function calls hvc_iucv_cleanup() to clean up the struct hvc_iucv_private + * instance. + * + * Locking: struct hvc_iucv_private->lock + */ +static void hvc_iucv_notifier_del(struct hvc_struct *hp, int id) +{ + struct hvc_iucv_private *priv; + struct iucv_path *path; + + priv = hvc_iucv_get_private(id); + if (!priv) + return; + + spin_lock_bh(&priv->lock); + path = priv->path; /* save reference to IUCV path */ + priv->path = NULL; + hvc_iucv_cleanup(priv); + spin_unlock_bh(&priv->lock); + + /* sever IUCV path outside of priv->lock due to lock ordering of: + * priv->lock <--> iucv_table_lock */ + if (path) { + iucv_path_sever(path, NULL); + iucv_path_free(path); + } +} + +/** + * hvc_iucv_path_pending() - IUCV handler to process a connection request. + * @path: Pending path (struct iucv_path) + * @ipvmid: Originator z/VM system identifier + * @ipuser: User specified data for this path + * (AF_IUCV: port/service name and originator port) + * + * The function uses the @ipuser data to check to determine if the pending + * path belongs to a terminal managed by this HVC backend. + * If the check is successful, then an additional check is done to ensure + * that a terminal cannot be accessed multiple times (only one connection + * to a terminal is allowed). In that particular case, the pending path is + * severed. If it is the first connection, the pending path is accepted and + * associated to the struct hvc_iucv_private. The iucv state is updated to + * reflect that a communication path has been established. + * + * Returns 0 if the path belongs to a terminal managed by the this HVC backend; + * otherwise returns -ENODEV in order to dispatch this path to other handlers. + * + * Locking: struct hvc_iucv_private->lock + */ +static int hvc_iucv_path_pending(struct iucv_path *path, + u8 ipvmid[8], u8 ipuser[16]) +{ + struct hvc_iucv_private *priv; + u8 nuser_data[16]; + int i, rc; + + priv = NULL; + for (i = 0; i < hvc_iucv_devices; i++) + if (hvc_iucv_table[i] && + (0 == memcmp(hvc_iucv_table[i]->srv_name, ipuser, 8))) { + priv = hvc_iucv_table[i]; + break; + } + + if (!priv) + return -ENODEV; + + spin_lock(&priv->lock); + + /* If the terminal is already connected or being severed, then sever + * this path to enforce that there is only ONE established communication + * path per terminal. */ + if (priv->iucv_state != IUCV_DISCONN) { + iucv_path_sever(path, ipuser); + iucv_path_free(path); + goto out_path_handled; + } + + /* accept path */ + memcpy(nuser_data, ipuser + 8, 8); /* remote service (for af_iucv) */ + memcpy(nuser_data + 8, ipuser, 8); /* local service (for af_iucv) */ + path->msglim = 0xffff; /* IUCV MSGLIMIT */ + path->flags &= ~IUCV_IPRMDATA; /* TODO: use IUCV_IPRMDATA */ + rc = iucv_path_accept(path, &hvc_iucv_handler, nuser_data, priv); + if (rc) { + iucv_path_sever(path, ipuser); + iucv_path_free(path); + goto out_path_handled; + } + priv->path = path; + priv->iucv_state = IUCV_CONNECTED; + +out_path_handled: + spin_unlock(&priv->lock); + return 0; +} + +/** + * hvc_iucv_path_severed() - IUCV handler to process a path sever. + * @path: Pending path (struct iucv_path) + * @ipuser: User specified data for this path + * (AF_IUCV: port/service name and originator port) + * + * The function also severs the path (as required by the IUCV protocol) and + * sets the iucv state to IUCV_SEVERED for the associated struct + * hvc_iucv_private instance. Later, the IUCV_SEVERED state triggers a tty + * hangup (hvc_iucv_get_chars() / hvc_iucv_write()). + * + * If tty portion of the HVC is closed then clean up the outqueue in addition. + * + * Locking: struct hvc_iucv_private->lock + */ +static void hvc_iucv_path_severed(struct iucv_path *path, u8 ipuser[16]) +{ + struct hvc_iucv_private *priv = path->private; + + spin_lock(&priv->lock); + priv->iucv_state = IUCV_SEVERED; + + /* NOTE: If the tty has not yet been opened by a getty program + * (e.g. to see console messages), then cleanup the + * hvc_iucv_private structure to allow re-connects. + * + * If the tty has been opened, the get_chars() callback returns + * -EPIPE to signal the hvc console layer to hang up the tty. */ + priv->path = NULL; + if (priv->tty_state == TTY_CLOSED) + hvc_iucv_cleanup(priv); + spin_unlock(&priv->lock); + + /* finally sever path (outside of priv->lock due to lock ordering) */ + iucv_path_sever(path, ipuser); + iucv_path_free(path); +} + +/** + * hvc_iucv_msg_pending() - IUCV handler to process an incoming IUCV message. + * @path: Pending path (struct iucv_path) + * @msg: Pointer to the IUCV message + * + * The function stores an incoming message on the input queue for later + * processing (by hvc_iucv_get_chars() / hvc_iucv_write()). + * However, if the tty has not yet been opened, the message is rejected. + * + * Locking: struct hvc_iucv_private->lock + */ +static void hvc_iucv_msg_pending(struct iucv_path *path, + struct iucv_message *msg) +{ + struct hvc_iucv_private *priv = path->private; + struct iucv_tty_buffer *rb; + + spin_lock(&priv->lock); + + /* reject messages if tty has not yet been opened */ + if (priv->tty_state == TTY_CLOSED) { + iucv_message_reject(path, msg); + goto unlock_return; + } + + /* allocate buffer an empty buffer element */ + rb = alloc_tty_buffer(0, GFP_ATOMIC); + if (!rb) { + iucv_message_reject(path, msg); + goto unlock_return; /* -ENOMEM */ + } + rb->msg = *msg; + + list_add_tail(&rb->list, &priv->tty_inqueue); + + hvc_kick(); /* wakup hvc console thread */ + +unlock_return: + spin_unlock(&priv->lock); +} + +/** + * hvc_iucv_msg_complete() - IUCV handler to process message completion + * @path: Pending path (struct iucv_path) + * @msg: Pointer to the IUCV message + * + * The function is called upon completion of message delivery and the + * message is removed from the outqueue. Additional delivery information + * can be found in msg->audit: rejected messages (0x040000 (IPADRJCT)) and + * purged messages (0x010000 (IPADPGNR)). + * + * Locking: struct hvc_iucv_private->lock + */ +static void hvc_iucv_msg_complete(struct iucv_path *path, + struct iucv_message *msg) +{ + struct hvc_iucv_private *priv = path->private; + struct iucv_tty_buffer *ent, *next; + LIST_HEAD(list_remove); + + spin_lock(&priv->lock); + list_for_each_entry_safe(ent, next, &priv->tty_outqueue, list) + if (ent->msg.id == msg->id) { + list_move(&ent->list, &list_remove); + break; + } + spin_unlock(&priv->lock); + destroy_tty_buffer_list(&list_remove); +} + + +/* HVC operations */ +static struct hv_ops hvc_iucv_ops = { + .get_chars = hvc_iucv_get_chars, + .put_chars = hvc_iucv_put_chars, + .notifier_add = hvc_iucv_notifier_add, + .notifier_del = hvc_iucv_notifier_del, + .notifier_hangup = hvc_iucv_notifier_hangup, +}; + +/** + * hvc_iucv_alloc() - Allocates a new struct hvc_iucv_private instance + * @id: hvc_iucv_table index + * + * This function allocates a new hvc_iucv_private struct and put the + * instance into hvc_iucv_table at index @id. + * Returns 0 on success; otherwise non-zero. + */ +static int __init hvc_iucv_alloc(int id) +{ + struct hvc_iucv_private *priv; + char name[9]; + int rc; + + priv = kzalloc(sizeof(struct hvc_iucv_private), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + spin_lock_init(&priv->lock); + INIT_LIST_HEAD(&priv->tty_outqueue); + INIT_LIST_HEAD(&priv->tty_inqueue); + + /* Finally allocate hvc */ + priv->hvc = hvc_alloc(HVC_IUCV_MAGIC + id, + HVC_IUCV_MAGIC + id, &hvc_iucv_ops, PAGE_SIZE); + if (IS_ERR(priv->hvc)) { + rc = PTR_ERR(priv->hvc); + kfree(priv); + return rc; + } + + /* setup iucv related information */ + snprintf(name, 9, "ihvc%-4d", id); + memcpy(priv->srv_name, name, 8); + ASCEBC(priv->srv_name, 8); + + hvc_iucv_table[id] = priv; + return 0; +} + +/** + * hvc_iucv_init() - Initialization of HVC backend for z/VM IUCV + */ +static int __init hvc_iucv_init(void) +{ + int rc, i; + + if (!MACHINE_IS_VM) { + pr_warning("The z/VM IUCV Hypervisor console cannot be " + "used without z/VM.\n"); + return -ENODEV; + } + + if (!hvc_iucv_devices) + return -ENODEV; + + if (hvc_iucv_devices > MAX_HVC_IUCV_LINES) + return -EINVAL; + + hvc_iucv_buffer_cache = kmem_cache_create(KMSG_COMPONENT, + sizeof(struct iucv_tty_buffer), + 0, 0, NULL); + if (!hvc_iucv_buffer_cache) { + pr_err("Not enough memory for driver initialization " + "(rs=%d).\n", 1); + return -ENOMEM; + } + + hvc_iucv_mempool = mempool_create_slab_pool(MEMPOOL_MIN_NR, + hvc_iucv_buffer_cache); + if (!hvc_iucv_mempool) { + pr_err("Not enough memory for driver initialization " + "(rs=%d).\n", 2); + kmem_cache_destroy(hvc_iucv_buffer_cache); + return -ENOMEM; + } + + /* allocate hvc_iucv_private structs */ + for (i = 0; i < hvc_iucv_devices; i++) { + rc = hvc_iucv_alloc(i); + if (rc) { + pr_err("Could not create new z/VM IUCV HVC backend " + "rc=%d.\n", rc); + goto out_error_hvc; + } + } + + /* register IUCV callback handler */ + rc = iucv_register(&hvc_iucv_handler, 0); + if (rc) { + pr_err("Could not register iucv handler (rc=%d).\n", rc); + goto out_error_iucv; + } + + return 0; + +out_error_iucv: + iucv_unregister(&hvc_iucv_handler, 0); +out_error_hvc: + for (i = 0; i < hvc_iucv_devices; i++) + if (hvc_iucv_table[i]) { + if (hvc_iucv_table[i]->hvc) + hvc_remove(hvc_iucv_table[i]->hvc); + kfree(hvc_iucv_table[i]); + } + mempool_destroy(hvc_iucv_mempool); + kmem_cache_destroy(hvc_iucv_buffer_cache); + return rc; +} + +/** + * hvc_iucv_console_init() - Early console initialization + */ +static int __init hvc_iucv_console_init(void) +{ + if (!MACHINE_IS_VM || !hvc_iucv_devices) + return -ENODEV; + return hvc_instantiate(HVC_IUCV_MAGIC, 0, &hvc_iucv_ops); +} + +/** + * hvc_iucv_config() - Parsing of hvc_iucv= kernel command line parameter + * @val: Parameter value (numeric) + */ +static int __init hvc_iucv_config(char *val) +{ + return strict_strtoul(val, 10, &hvc_iucv_devices); +} + + +module_init(hvc_iucv_init); +console_initcall(hvc_iucv_console_init); +__setup("hvc_iucv=", hvc_iucv_config); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("HVC back-end for z/VM IUCV."); +MODULE_AUTHOR("Hendrik Brueckner <brueckner@linux.vnet.ibm.com>"); diff --git a/drivers/char/hvc_udbg.c b/drivers/char/hvc_udbg.c new file mode 100644 index 00000000000..bd63ba878a5 --- /dev/null +++ b/drivers/char/hvc_udbg.c @@ -0,0 +1,96 @@ +/* + * udbg interface to hvc_console.c + * + * (C) Copyright David Gibson, IBM Corporation 2008. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/irq.h> + +#include <asm/udbg.h> + +#include "hvc_console.h" + +struct hvc_struct *hvc_udbg_dev; + +static int hvc_udbg_put(uint32_t vtermno, const char *buf, int count) +{ + int i; + + for (i = 0; i < count; i++) + udbg_putc(buf[i]); + + return i; +} + +static int hvc_udbg_get(uint32_t vtermno, char *buf, int count) +{ + int i, c; + + if (!udbg_getc_poll) + return 0; + + for (i = 0; i < count; i++) { + if ((c = udbg_getc_poll()) == -1) + break; + buf[i] = c; + } + + return i; +} + +static struct hv_ops hvc_udbg_ops = { + .get_chars = hvc_udbg_get, + .put_chars = hvc_udbg_put, +}; + +static int __init hvc_udbg_init(void) +{ + struct hvc_struct *hp; + + BUG_ON(hvc_udbg_dev); + + hp = hvc_alloc(0, NO_IRQ, &hvc_udbg_ops, 16); + if (IS_ERR(hp)) + return PTR_ERR(hp); + + hvc_udbg_dev = hp; + + return 0; +} +module_init(hvc_udbg_init); + +static void __exit hvc_udbg_exit(void) +{ + if (hvc_udbg_dev) + hvc_remove(hvc_udbg_dev); +} +module_exit(hvc_udbg_exit); + +static int __init hvc_udbg_console_init(void) +{ + hvc_instantiate(0, 0, &hvc_udbg_ops); + add_preferred_console("hvc", 0, NULL); + + return 0; +} +console_initcall(hvc_udbg_console_init); diff --git a/drivers/char/hvc_vio.c b/drivers/char/hvc_vio.c index 019e0b58593..bd62dc86b47 100644 --- a/drivers/char/hvc_vio.c +++ b/drivers/char/hvc_vio.c @@ -153,8 +153,10 @@ static int hvc_find_vtys(void) /* We have statically defined space for only a certain number * of console adapters. */ - if (num_found >= MAX_NR_HVC_CONSOLES) + if (num_found >= MAX_NR_HVC_CONSOLES) { + of_node_put(vty); break; + } vtermno = of_get_property(vty, "reg", NULL); if (!vtermno) diff --git a/drivers/char/hvcs.c b/drivers/char/hvcs.c index 473d9b14439..6e6eb445d37 100644 --- a/drivers/char/hvcs.c +++ b/drivers/char/hvcs.c @@ -269,7 +269,7 @@ struct hvcs_struct { unsigned int index; struct tty_struct *tty; - unsigned int open_count; + int open_count; /* * Used to tell the driver kernel_thread what operations need to take diff --git a/drivers/char/hvsi.c b/drivers/char/hvsi.c index 59c6f9ab94e..406f8742a26 100644 --- a/drivers/char/hvsi.c +++ b/drivers/char/hvsi.c @@ -75,7 +75,7 @@ struct hvsi_struct { spinlock_t lock; int index; struct tty_struct *tty; - unsigned int count; + int count; uint8_t throttle_buf[128]; uint8_t outbuf[N_OUTBUF]; /* to implement write_room and chars_in_buffer */ /* inbuf is for packet reassembly. leave a little room for leftovers. */ @@ -997,14 +997,14 @@ out: static int hvsi_write_room(struct tty_struct *tty) { - struct hvsi_struct *hp = (struct hvsi_struct *)tty->driver_data; + struct hvsi_struct *hp = tty->driver_data; return N_OUTBUF - hp->n_outbuf; } static int hvsi_chars_in_buffer(struct tty_struct *tty) { - struct hvsi_struct *hp = (struct hvsi_struct *)tty->driver_data; + struct hvsi_struct *hp = tty->driver_data; return hp->n_outbuf; } @@ -1070,7 +1070,7 @@ out: */ static void hvsi_throttle(struct tty_struct *tty) { - struct hvsi_struct *hp = (struct hvsi_struct *)tty->driver_data; + struct hvsi_struct *hp = tty->driver_data; pr_debug("%s\n", __func__); @@ -1079,7 +1079,7 @@ static void hvsi_throttle(struct tty_struct *tty) static void hvsi_unthrottle(struct tty_struct *tty) { - struct hvsi_struct *hp = (struct hvsi_struct *)tty->driver_data; + struct hvsi_struct *hp = tty->driver_data; unsigned long flags; int shouldflip = 0; @@ -1100,7 +1100,7 @@ static void hvsi_unthrottle(struct tty_struct *tty) static int hvsi_tiocmget(struct tty_struct *tty, struct file *file) { - struct hvsi_struct *hp = (struct hvsi_struct *)tty->driver_data; + struct hvsi_struct *hp = tty->driver_data; hvsi_get_mctrl(hp); return hp->mctrl; @@ -1109,7 +1109,7 @@ static int hvsi_tiocmget(struct tty_struct *tty, struct file *file) static int hvsi_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - struct hvsi_struct *hp = (struct hvsi_struct *)tty->driver_data; + struct hvsi_struct *hp = tty->driver_data; unsigned long flags; uint16_t new_mctrl; diff --git a/drivers/char/hw_random/n2-drv.c b/drivers/char/hw_random/n2-drv.c index 8859aeac2d2..9b3e09cd41f 100644 --- a/drivers/char/hw_random/n2-drv.c +++ b/drivers/char/hw_random/n2-drv.c @@ -482,7 +482,7 @@ static void n2rng_dump_test_buffer(struct n2rng *np) int i; for (i = 0; i < SELFTEST_BUFFER_WORDS; i++) - dev_err(&np->op->dev, "Test buffer slot %d [0x%016lx]\n", + dev_err(&np->op->dev, "Test buffer slot %d [0x%016llx]\n", i, np->test_buffer[i]); } diff --git a/drivers/char/i8k.c b/drivers/char/i8k.c index b60d425ce8d..fc8cf7ac7f2 100644 --- a/drivers/char/i8k.c +++ b/drivers/char/i8k.c @@ -485,7 +485,21 @@ static struct dmi_system_id __initdata i8k_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "MP061"), }, }, - { } + { + .ident = "Dell Precision", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Precision"), + }, + }, + { + .ident = "Dell Vostro", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Vostro"), + }, + }, + { } }; /* diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index 04e4549299b..24aa6e88e22 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -328,11 +328,13 @@ static inline void drop_rts(struct isi_port *port) } /* card->lock MUST NOT be held */ -static inline void raise_dtr_rts(struct isi_port *port) + +static void isicom_raise_dtr_rts(struct tty_port *port) { - struct isi_board *card = port->card; + struct isi_port *ip = container_of(port, struct isi_port, port); + struct isi_board *card = ip->card; unsigned long base = card->base; - u16 channel = port->channel; + u16 channel = ip->channel; if (!lock_card(card)) return; @@ -340,7 +342,7 @@ static inline void raise_dtr_rts(struct isi_port *port) outw(0x8000 | (channel << card->shift_count) | 0x02, base); outw(0x0f04, base); InterruptTheCard(base); - port->status |= (ISI_DTR | ISI_RTS); + ip->status |= (ISI_DTR | ISI_RTS); unlock_card(card); } @@ -830,80 +832,10 @@ static int isicom_setup_port(struct tty_struct *tty) return 0; } -static int block_til_ready(struct tty_struct *tty, struct file *filp, - struct isi_port *port) +static int isicom_carrier_raised(struct tty_port *port) { - struct isi_board *card = port->card; - int do_clocal = 0, retval; - unsigned long flags; - DECLARE_WAITQUEUE(wait, current); - - /* block if port is in the process of being closed */ - - if (tty_hung_up_p(filp) || port->port.flags & ASYNC_CLOSING) { - pr_dbg("block_til_ready: close in progress.\n"); - interruptible_sleep_on(&port->port.close_wait); - if (port->port.flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - else - return -ERESTARTSYS; - } - - /* if non-blocking mode is set ... */ - - if ((filp->f_flags & O_NONBLOCK) || - (tty->flags & (1 << TTY_IO_ERROR))) { - pr_dbg("block_til_ready: non-block mode.\n"); - port->port.flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - if (C_CLOCAL(tty)) - do_clocal = 1; - - /* block waiting for DCD to be asserted, and while - callout dev is busy */ - retval = 0; - add_wait_queue(&port->port.open_wait, &wait); - - spin_lock_irqsave(&card->card_lock, flags); - if (!tty_hung_up_p(filp)) - port->port.count--; - port->port.blocked_open++; - spin_unlock_irqrestore(&card->card_lock, flags); - - while (1) { - raise_dtr_rts(port); - - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || !(port->port.flags & ASYNC_INITIALIZED)) { - if (port->port.flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; - break; - } - if (!(port->port.flags & ASYNC_CLOSING) && - (do_clocal || (port->status & ISI_DCD))) { - break; - } - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - schedule(); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&port->port.open_wait, &wait); - spin_lock_irqsave(&card->card_lock, flags); - if (!tty_hung_up_p(filp)) - port->port.count++; - port->port.blocked_open--; - spin_unlock_irqrestore(&card->card_lock, flags); - if (retval) - return retval; - port->port.flags |= ASYNC_NORMAL_ACTIVE; - return 0; + struct isi_port *ip = container_of(port, struct isi_port, port); + return (ip->status & ISI_DCD)?1 : 0; } static int isicom_open(struct tty_struct *tty, struct file *filp) @@ -932,12 +864,13 @@ static int isicom_open(struct tty_struct *tty, struct file *filp) isicom_setup_board(card); + /* FIXME: locking on port.count etc */ port->port.count++; tty->driver_data = port; tty_port_tty_set(&port->port, tty); error = isicom_setup_port(tty); if (error == 0) - error = block_til_ready(tty, filp, port); + error = tty_port_block_til_ready(&port->port, tty, filp); return error; } @@ -1012,76 +945,30 @@ static void isicom_flush_buffer(struct tty_struct *tty) static void isicom_close(struct tty_struct *tty, struct file *filp) { - struct isi_port *port = tty->driver_data; + struct isi_port *ip = tty->driver_data; + struct tty_port *port = &ip->port; struct isi_board *card; unsigned long flags; - if (!port) - return; - card = port->card; - if (isicom_paranoia_check(port, tty->name, "isicom_close")) - return; - - pr_dbg("Close start!!!.\n"); - - spin_lock_irqsave(&card->card_lock, flags); - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&card->card_lock, flags); - return; - } - - if (tty->count == 1 && port->port.count != 1) { - printk(KERN_WARNING "ISICOM:(0x%lx) isicom_close: bad port " - "count tty->count = 1 port count = %d.\n", - card->base, port->port.count); - port->port.count = 1; - } - if (--port->port.count < 0) { - printk(KERN_WARNING "ISICOM:(0x%lx) isicom_close: bad port " - "count for channel%d = %d", card->base, port->channel, - port->port.count); - port->port.count = 0; - } + BUG_ON(!ip); - if (port->port.count) { - spin_unlock_irqrestore(&card->card_lock, flags); + card = ip->card; + if (isicom_paranoia_check(ip, tty->name, "isicom_close")) return; - } - port->port.flags |= ASYNC_CLOSING; - tty->closing = 1; - spin_unlock_irqrestore(&card->card_lock, flags); - if (port->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, port->port.closing_wait); /* indicate to the card that no more data can be received on this port */ spin_lock_irqsave(&card->card_lock, flags); - if (port->port.flags & ASYNC_INITIALIZED) { - card->port_status &= ~(1 << port->channel); + if (port->flags & ASYNC_INITIALIZED) { + card->port_status &= ~(1 << ip->channel); outw(card->port_status, card->base + 0x02); } - isicom_shutdown_port(port); + isicom_shutdown_port(ip); spin_unlock_irqrestore(&card->card_lock, flags); isicom_flush_buffer(tty); - tty_ldisc_flush(tty); - - spin_lock_irqsave(&card->card_lock, flags); - tty->closing = 0; - - if (port->port.blocked_open) { - spin_unlock_irqrestore(&card->card_lock, flags); - if (port->port.close_delay) { - pr_dbg("scheduling until time out.\n"); - msleep_interruptible( - jiffies_to_msecs(port->port.close_delay)); - } - spin_lock_irqsave(&card->card_lock, flags); - wake_up_interruptible(&port->port.open_wait); - } - port->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING); - wake_up_interruptible(&port->port.close_wait); - spin_unlock_irqrestore(&card->card_lock, flags); + + tty_port_close_end(port, tty); } /* write et all */ @@ -1420,10 +1307,7 @@ static void isicom_hangup(struct tty_struct *tty) isicom_shutdown_port(port); spin_unlock_irqrestore(&port->card->card_lock, flags); - port->port.count = 0; - port->port.flags &= ~ASYNC_NORMAL_ACTIVE; - tty_port_tty_set(&port->port, NULL); - wake_up_interruptible(&port->port.open_wait); + tty_port_hangup(&port->port); } @@ -1452,6 +1336,11 @@ static const struct tty_operations isicom_ops = { .break_ctl = isicom_send_break, }; +static const struct tty_port_operations isicom_port_ops = { + .carrier_raised = isicom_carrier_raised, + .raise_dtr_rts = isicom_raise_dtr_rts, +}; + static int __devinit reset_card(struct pci_dev *pdev, const unsigned int card, unsigned int *signature) { @@ -1794,6 +1683,7 @@ static int __init isicom_init(void) spin_lock_init(&isi_card[idx].card_lock); for (channel = 0; channel < 16; channel++, port++) { tty_port_init(&port->port); + port->port.ops = &isicom_port_ops; port->magic = ISICOM_MAGIC; port->card = &isi_card[idx]; port->channel = channel; diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c index 4b10770fa93..5c3dc6b8411 100644 --- a/drivers/char/istallion.c +++ b/drivers/char/istallion.c @@ -151,7 +151,7 @@ static char *stli_drvversion = "5.6.0"; static char *stli_serialname = "ttyE"; static struct tty_driver *stli_serial; - +static const struct tty_port_operations stli_port_ops; #define STLI_TXBUFSIZE 4096 @@ -626,8 +626,6 @@ static int stli_hostcmd(struct stlibrd *brdp, struct stliport *portp); static int stli_initopen(struct tty_struct *tty, struct stlibrd *brdp, struct stliport *portp); static int stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait); static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait); -static int stli_waitcarrier(struct tty_struct *tty, struct stlibrd *brdp, - struct stliport *portp, struct file *filp); static int stli_setport(struct tty_struct *tty); static int stli_cmdwait(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback); static void stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback); @@ -769,7 +767,7 @@ static int stli_parsebrd(struct stlconf *confp, char **argp) break; } if (i == ARRAY_SIZE(stli_brdstr)) { - printk("STALLION: unknown board name, %s?\n", argp[0]); + printk(KERN_WARNING "istallion: unknown board name, %s?\n", argp[0]); return 0; } @@ -787,6 +785,7 @@ static int stli_open(struct tty_struct *tty, struct file *filp) { struct stlibrd *brdp; struct stliport *portp; + struct tty_port *port; unsigned int minordev, brdnr, portnr; int rc; @@ -808,30 +807,19 @@ static int stli_open(struct tty_struct *tty, struct file *filp) return -ENODEV; if (portp->devnr < 1) return -ENODEV; - - -/* - * Check if this port is in the middle of closing. If so then wait - * until it is closed then return error status based on flag settings. - * The sleep here does not need interrupt protection since the wakeup - * for it is done with the same context. - */ - if (portp->port.flags & ASYNC_CLOSING) { - interruptible_sleep_on(&portp->port.close_wait); - if (portp->port.flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - return -ERESTARTSYS; - } + port = &portp->port; /* * On the first open of the device setup the port hardware, and * initialize the per port data structure. Since initializing the port * requires several commands to the board we will need to wait for any * other open that is already initializing the port. + * + * Review - locking */ - tty_port_tty_set(&portp->port, tty); + tty_port_tty_set(port, tty); tty->driver_data = portp; - portp->port.count++; + port->count++; wait_event_interruptible(portp->raw_wait, !test_bit(ST_INITIALIZING, &portp->state)); @@ -841,7 +829,8 @@ static int stli_open(struct tty_struct *tty, struct file *filp) if ((portp->port.flags & ASYNC_INITIALIZED) == 0) { set_bit(ST_INITIALIZING, &portp->state); if ((rc = stli_initopen(tty, brdp, portp)) >= 0) { - portp->port.flags |= ASYNC_INITIALIZED; + /* Locking */ + port->flags |= ASYNC_INITIALIZED; clear_bit(TTY_IO_ERROR, &tty->flags); } clear_bit(ST_INITIALIZING, &portp->state); @@ -849,31 +838,7 @@ static int stli_open(struct tty_struct *tty, struct file *filp) if (rc < 0) return rc; } - -/* - * Check if this port is in the middle of closing. If so then wait - * until it is closed then return error status, based on flag settings. - * The sleep here does not need interrupt protection since the wakeup - * for it is done with the same context. - */ - if (portp->port.flags & ASYNC_CLOSING) { - interruptible_sleep_on(&portp->port.close_wait); - if (portp->port.flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - return -ERESTARTSYS; - } - -/* - * Based on type of open being done check if it can overlap with any - * previous opens still in effect. If we are a normal serial device - * then also we might have to wait for carrier. - */ - if (!(filp->f_flags & O_NONBLOCK)) { - if ((rc = stli_waitcarrier(tty, brdp, portp, filp)) != 0) - return rc; - } - portp->port.flags |= ASYNC_NORMAL_ACTIVE; - return 0; + return tty_port_block_til_ready(&portp->port, tty, filp); } /*****************************************************************************/ @@ -882,25 +847,16 @@ static void stli_close(struct tty_struct *tty, struct file *filp) { struct stlibrd *brdp; struct stliport *portp; + struct tty_port *port; unsigned long flags; portp = tty->driver_data; if (portp == NULL) return; + port = &portp->port; - spin_lock_irqsave(&stli_lock, flags); - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&stli_lock, flags); - return; - } - if ((tty->count == 1) && (portp->port.count != 1)) - portp->port.count = 1; - if (portp->port.count-- > 1) { - spin_unlock_irqrestore(&stli_lock, flags); + if (tty_port_close_start(port, tty, filp) == 0) return; - } - - portp->port.flags |= ASYNC_CLOSING; /* * May want to wait for data to drain before closing. The BUSY flag @@ -908,15 +864,19 @@ static void stli_close(struct tty_struct *tty, struct file *filp) * updated by messages from the slave - indicating when all chars * really have drained. */ + spin_lock_irqsave(&stli_lock, flags); if (tty == stli_txcooktty) stli_flushchars(tty); - tty->closing = 1; spin_unlock_irqrestore(&stli_lock, flags); + /* We end up doing this twice for the moment. This needs looking at + eventually. Note we still use portp->closing_wait as a result */ if (portp->closing_wait != ASYNC_CLOSING_WAIT_NONE) tty_wait_until_sent(tty, portp->closing_wait); - portp->port.flags &= ~ASYNC_INITIALIZED; + /* FIXME: port locking here needs attending to */ + port->flags &= ~ASYNC_INITIALIZED; + brdp = stli_brds[portp->brdnr]; stli_rawclose(brdp, portp, 0, 0); if (tty->termios->c_cflag & HUPCL) { @@ -934,17 +894,8 @@ static void stli_close(struct tty_struct *tty, struct file *filp) set_bit(ST_DOFLUSHRX, &portp->state); stli_flushbuffer(tty); - tty->closing = 0; - tty_port_tty_set(&portp->port, NULL); - - if (portp->openwaitcnt) { - if (portp->close_delay) - msleep_interruptible(jiffies_to_msecs(portp->close_delay)); - wake_up_interruptible(&portp->port.open_wait); - } - - portp->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&portp->port.close_wait); + tty_port_close_end(port, tty); + tty_port_tty_set(port, NULL); } /*****************************************************************************/ @@ -1183,62 +1134,23 @@ static int stli_setport(struct tty_struct *tty) /*****************************************************************************/ -/* - * Possibly need to wait for carrier (DCD signal) to come high. Say - * maybe because if we are clocal then we don't need to wait... - */ - -static int stli_waitcarrier(struct tty_struct *tty, struct stlibrd *brdp, - struct stliport *portp, struct file *filp) +static int stli_carrier_raised(struct tty_port *port) { - unsigned long flags; - int rc, doclocal; - - rc = 0; - doclocal = 0; - - if (tty->termios->c_cflag & CLOCAL) - doclocal++; - - spin_lock_irqsave(&stli_lock, flags); - portp->openwaitcnt++; - if (! tty_hung_up_p(filp)) - portp->port.count--; - spin_unlock_irqrestore(&stli_lock, flags); - - for (;;) { - stli_mkasysigs(&portp->asig, 1, 1); - if ((rc = stli_cmdwait(brdp, portp, A_SETSIGNALS, - &portp->asig, sizeof(asysigs_t), 0)) < 0) - break; - if (tty_hung_up_p(filp) || - ((portp->port.flags & ASYNC_INITIALIZED) == 0)) { - if (portp->port.flags & ASYNC_HUP_NOTIFY) - rc = -EBUSY; - else - rc = -ERESTARTSYS; - break; - } - if (((portp->port.flags & ASYNC_CLOSING) == 0) && - (doclocal || (portp->sigs & TIOCM_CD))) { - break; - } - if (signal_pending(current)) { - rc = -ERESTARTSYS; - break; - } - interruptible_sleep_on(&portp->port.open_wait); - } - - spin_lock_irqsave(&stli_lock, flags); - if (! tty_hung_up_p(filp)) - portp->port.count++; - portp->openwaitcnt--; - spin_unlock_irqrestore(&stli_lock, flags); + struct stliport *portp = container_of(port, struct stliport, port); + return (portp->sigs & TIOCM_CD) ? 1 : 0; +} - return rc; +static void stli_raise_dtr_rts(struct tty_port *port) +{ + struct stliport *portp = container_of(port, struct stliport, port); + struct stlibrd *brdp = stli_brds[portp->brdnr]; + stli_mkasysigs(&portp->asig, 1, 1); + if (stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig, + sizeof(asysigs_t), 0) < 0) + printk(KERN_WARNING "istallion: dtr raise failed.\n"); } + /*****************************************************************************/ /* @@ -1550,7 +1462,7 @@ static int stli_getserial(struct stliport *portp, struct serial_struct __user *s sio.irq = 0; sio.flags = portp->port.flags; sio.baud_base = portp->baud_base; - sio.close_delay = portp->close_delay; + sio.close_delay = portp->port.close_delay; sio.closing_wait = portp->closing_wait; sio.custom_divisor = portp->custom_divisor; sio.xmit_fifo_size = 0; @@ -1582,7 +1494,7 @@ static int stli_setserial(struct tty_struct *tty, struct serial_struct __user *s return -EFAULT; if (!capable(CAP_SYS_ADMIN)) { if ((sio.baud_base != portp->baud_base) || - (sio.close_delay != portp->close_delay) || + (sio.close_delay != portp->port.close_delay) || ((sio.flags & ~ASYNC_USR_MASK) != (portp->port.flags & ~ASYNC_USR_MASK))) return -EPERM; @@ -1591,7 +1503,7 @@ static int stli_setserial(struct tty_struct *tty, struct serial_struct __user *s portp->port.flags = (portp->port.flags & ~ASYNC_USR_MASK) | (sio.flags & ASYNC_USR_MASK); portp->baud_base = sio.baud_base; - portp->close_delay = sio.close_delay; + portp->port.close_delay = sio.close_delay; portp->closing_wait = sio.closing_wait; portp->custom_divisor = sio.custom_divisor; @@ -1821,6 +1733,7 @@ static void stli_hangup(struct tty_struct *tty) { struct stliport *portp; struct stlibrd *brdp; + struct tty_port *port; unsigned long flags; portp = tty->driver_data; @@ -1831,8 +1744,11 @@ static void stli_hangup(struct tty_struct *tty) brdp = stli_brds[portp->brdnr]; if (brdp == NULL) return; + port = &portp->port; - portp->port.flags &= ~ASYNC_INITIALIZED; + spin_lock_irqsave(&port->lock, flags); + port->flags &= ~ASYNC_INITIALIZED; + spin_unlock_irqrestore(&port->lock, flags); if (!test_bit(ST_CLOSING, &portp->state)) stli_rawclose(brdp, portp, 0, 0); @@ -1853,12 +1769,9 @@ static void stli_hangup(struct tty_struct *tty) clear_bit(ST_TXBUSY, &portp->state); clear_bit(ST_RXSTOP, &portp->state); set_bit(TTY_IO_ERROR, &tty->flags); - tty_port_tty_set(&portp->port, NULL); - portp->port.flags &= ~ASYNC_NORMAL_ACTIVE; - portp->port.count = 0; spin_unlock_irqrestore(&stli_lock, flags); - wake_up_interruptible(&portp->port.open_wait); + tty_port_hangup(port); } /*****************************************************************************/ @@ -2132,7 +2045,7 @@ static void __stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigne unsigned char __iomem *bits; if (test_bit(ST_CMDING, &portp->state)) { - printk(KERN_ERR "STALLION: command already busy, cmd=%x!\n", + printk(KERN_ERR "istallion: command already busy, cmd=%x!\n", (int) cmd); return; } @@ -2692,16 +2605,17 @@ static int stli_initports(struct stlibrd *brdp) for (i = 0, panelnr = 0, panelport = 0; (i < brdp->nrports); i++) { portp = kzalloc(sizeof(struct stliport), GFP_KERNEL); if (!portp) { - printk("STALLION: failed to allocate port structure\n"); + printk(KERN_WARNING "istallion: failed to allocate port structure\n"); continue; } tty_port_init(&portp->port); + portp->port.ops = &stli_port_ops; portp->magic = STLI_PORTMAGIC; portp->portnr = i; portp->brdnr = brdp->brdnr; portp->panelnr = panelnr; portp->baud_base = STL_BAUDBASE; - portp->close_delay = STL_CLOSEDELAY; + portp->port.close_delay = STL_CLOSEDELAY; portp->closing_wait = 30 * HZ; init_waitqueue_head(&portp->port.open_wait); init_waitqueue_head(&portp->port.close_wait); @@ -2758,7 +2672,7 @@ static void __iomem *stli_ecpgetmemptr(struct stlibrd *brdp, unsigned long offse unsigned char val; if (offset > brdp->memsize) { - printk(KERN_ERR "STALLION: shared memory pointer=%x out of " + printk(KERN_ERR "istallion: shared memory pointer=%x out of " "range at line=%d(%d), brd=%d\n", (int) offset, line, __LINE__, brdp->brdnr); ptr = NULL; @@ -2832,7 +2746,7 @@ static void __iomem *stli_ecpeigetmemptr(struct stlibrd *brdp, unsigned long off unsigned char val; if (offset > brdp->memsize) { - printk(KERN_ERR "STALLION: shared memory pointer=%x out of " + printk(KERN_ERR "istallion: shared memory pointer=%x out of " "range at line=%d(%d), brd=%d\n", (int) offset, line, __LINE__, brdp->brdnr); ptr = NULL; @@ -2884,7 +2798,7 @@ static void __iomem *stli_ecpmcgetmemptr(struct stlibrd *brdp, unsigned long off unsigned char val; if (offset > brdp->memsize) { - printk(KERN_ERR "STALLION: shared memory pointer=%x out of " + printk(KERN_ERR "istallion: shared memory pointer=%x out of " "range at line=%d(%d), brd=%d\n", (int) offset, line, __LINE__, brdp->brdnr); ptr = NULL; @@ -2929,7 +2843,7 @@ static void __iomem *stli_ecppcigetmemptr(struct stlibrd *brdp, unsigned long of unsigned char val; if (offset > brdp->memsize) { - printk(KERN_ERR "STALLION: shared memory pointer=%x out of " + printk(KERN_ERR "istallion: shared memory pointer=%x out of " "range at line=%d(%d), board=%d\n", (int) offset, line, __LINE__, brdp->brdnr); ptr = NULL; @@ -2994,7 +2908,7 @@ static void __iomem *stli_onbgetmemptr(struct stlibrd *brdp, unsigned long offse void __iomem *ptr; if (offset > brdp->memsize) { - printk(KERN_ERR "STALLION: shared memory pointer=%x out of " + printk(KERN_ERR "istallion: shared memory pointer=%x out of " "range at line=%d(%d), brd=%d\n", (int) offset, line, __LINE__, brdp->brdnr); ptr = NULL; @@ -3060,7 +2974,7 @@ static void __iomem *stli_onbegetmemptr(struct stlibrd *brdp, unsigned long offs unsigned char val; if (offset > brdp->memsize) { - printk(KERN_ERR "STALLION: shared memory pointer=%x out of " + printk(KERN_ERR "istallion: shared memory pointer=%x out of " "range at line=%d(%d), brd=%d\n", (int) offset, line, __LINE__, brdp->brdnr); ptr = NULL; @@ -3499,7 +3413,7 @@ static int stli_startbrd(struct stlibrd *brdp) #endif if (nrdevs < (brdp->nrports + 1)) { - printk(KERN_ERR "STALLION: slave failed to allocate memory for " + printk(KERN_ERR "istallion: slave failed to allocate memory for " "all devices, devices=%d\n", nrdevs); brdp->nrports = nrdevs - 1; } @@ -3509,13 +3423,13 @@ static int stli_startbrd(struct stlibrd *brdp) brdp->bitsize = (nrdevs + 7) / 8; memoff = readl(&hdrp->memp); if (memoff > brdp->memsize) { - printk(KERN_ERR "STALLION: corrupted shared memory region?\n"); + printk(KERN_ERR "istallion: corrupted shared memory region?\n"); rc = -EIO; goto stli_donestartup; } memp = (cdkmem_t __iomem *) EBRDGETMEMPTR(brdp, memoff); if (readw(&memp->dtype) != TYP_ASYNCTRL) { - printk(KERN_ERR "STALLION: no slave control device found\n"); + printk(KERN_ERR "istallion: no slave control device found\n"); goto stli_donestartup; } memp++; @@ -3600,7 +3514,7 @@ static int __devinit stli_brdinit(struct stlibrd *brdp) retval = stli_initonb(brdp); break; default: - printk(KERN_ERR "STALLION: board=%d is unknown board " + printk(KERN_ERR "istallion: board=%d is unknown board " "type=%d\n", brdp->brdnr, brdp->brdtype); retval = -ENODEV; } @@ -3609,7 +3523,7 @@ static int __devinit stli_brdinit(struct stlibrd *brdp) return retval; stli_initports(brdp); - printk(KERN_INFO "STALLION: %s found, board=%d io=%x mem=%x " + printk(KERN_INFO "istallion: %s found, board=%d io=%x mem=%x " "nrpanels=%d nrports=%d\n", stli_brdnames[brdp->brdtype], brdp->brdnr, brdp->iobase, (int) brdp->memaddr, brdp->nrpanels, brdp->nrports); @@ -3703,7 +3617,7 @@ static int stli_eisamemprobe(struct stlibrd *brdp) if (! foundit) { brdp->memaddr = 0; brdp->membase = NULL; - printk(KERN_ERR "STALLION: failed to probe shared memory " + printk(KERN_ERR "istallion: failed to probe shared memory " "region for %s in EISA slot=%d\n", stli_brdnames[brdp->brdtype], (brdp->iobase >> 12)); return -ENODEV; @@ -3848,7 +3762,7 @@ static int __devinit stli_pciprobe(struct pci_dev *pdev, mutex_lock(&stli_brdslock); brdnr = stli_getbrdnr(); if (brdnr < 0) { - printk(KERN_INFO "STALLION: too many boards found, " + printk(KERN_INFO "istallion: too many boards found, " "maximum supported %d\n", STL_MAXBRDS); mutex_unlock(&stli_brdslock); retval = -EIO; @@ -3920,7 +3834,7 @@ static struct stlibrd *stli_allocbrd(void) brdp = kzalloc(sizeof(struct stlibrd), GFP_KERNEL); if (!brdp) { - printk(KERN_ERR "STALLION: failed to allocate memory " + printk(KERN_ERR "istallion: failed to allocate memory " "(size=%Zd)\n", sizeof(struct stlibrd)); return NULL; } @@ -4518,6 +4432,11 @@ static const struct tty_operations stli_ops = { .tiocmset = stli_tiocmset, }; +static const struct tty_port_operations stli_port_ops = { + .carrier_raised = stli_carrier_raised, + .raise_dtr_rts = stli_raise_dtr_rts, +}; + /*****************************************************************************/ /* * Loadable module initialization stuff. @@ -4554,7 +4473,7 @@ static int __init istallion_module_init(void) stli_txcookbuf = kmalloc(STLI_TXBUFSIZE, GFP_KERNEL); if (!stli_txcookbuf) { - printk(KERN_ERR "STALLION: failed to allocate memory " + printk(KERN_ERR "istallion: failed to allocate memory " "(size=%d)\n", STLI_TXBUFSIZE); retval = -ENOMEM; goto err; @@ -4579,7 +4498,7 @@ static int __init istallion_module_init(void) retval = tty_register_driver(stli_serial); if (retval) { - printk(KERN_ERR "STALLION: failed to register serial driver\n"); + printk(KERN_ERR "istallion: failed to register serial driver\n"); goto err_ttyput; } @@ -4593,7 +4512,7 @@ static int __init istallion_module_init(void) */ retval = register_chrdev(STL_SIOMEMMAJOR, "staliomem", &stli_fsiomem); if (retval) { - printk(KERN_ERR "STALLION: failed to register serial memory " + printk(KERN_ERR "istallion: failed to register serial memory " "device\n"); goto err_deinit; } diff --git a/drivers/char/mem.c b/drivers/char/mem.c index 6431f6921a6..3586b3b3df3 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -425,9 +425,6 @@ static ssize_t read_oldmem(struct file *file, char __user *buf, } #endif -extern long vread(char *buf, char *addr, unsigned long count); -extern long vwrite(char *buf, char *addr, unsigned long count); - #ifdef CONFIG_DEVKMEM /* * This function reads the *virtual* memory as seen by the kernel. diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c index 12d327a2c9b..8b0da97d529 100644 --- a/drivers/char/moxa.c +++ b/drivers/char/moxa.c @@ -206,6 +206,7 @@ static void moxa_poll(unsigned long); static void moxa_set_tty_param(struct tty_struct *, struct ktermios *); static void moxa_setup_empty_event(struct tty_struct *); static void moxa_shut_down(struct tty_struct *); +static int moxa_carrier_raised(struct tty_port *); /* * moxa board interface functions: */ @@ -405,6 +406,10 @@ static const struct tty_operations moxa_ops = { .tiocmset = moxa_tiocmset, }; +static const struct tty_port_operations moxa_port_ops = { + .carrier_raised = moxa_carrier_raised, +}; + static struct tty_driver *moxaDriver; static DEFINE_TIMER(moxaTimer, moxa_poll, 0, 0); static DEFINE_SPINLOCK(moxa_lock); @@ -826,6 +831,7 @@ static int moxa_init_board(struct moxa_board_conf *brd, struct device *dev) for (i = 0, p = brd->ports; i < MAX_PORTS_PER_BOARD; i++, p++) { tty_port_init(&p->port); + p->port.ops = &moxa_port_ops; p->type = PORT_16550A; p->cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL; } @@ -1115,15 +1121,27 @@ static void moxa_close_port(struct tty_struct *tty) tty_port_tty_set(&ch->port, NULL); } +static int moxa_carrier_raised(struct tty_port *port) +{ + struct moxa_port *ch = container_of(port, struct moxa_port, port); + int dcd; + + spin_lock_bh(&moxa_lock); + dcd = ch->DCDState; + spin_unlock_bh(&moxa_lock); + return dcd; +} + static int moxa_block_till_ready(struct tty_struct *tty, struct file *filp, struct moxa_port *ch) { + struct tty_port *port = &ch->port; DEFINE_WAIT(wait); int retval = 0; u8 dcd; while (1) { - prepare_to_wait(&ch->port.open_wait, &wait, TASK_INTERRUPTIBLE); + prepare_to_wait(&port->open_wait, &wait, TASK_INTERRUPTIBLE); if (tty_hung_up_p(filp)) { #ifdef SERIAL_DO_RESTART retval = -ERESTARTSYS; @@ -1132,9 +1150,7 @@ static int moxa_block_till_ready(struct tty_struct *tty, struct file *filp, #endif break; } - spin_lock_bh(&moxa_lock); - dcd = ch->DCDState; - spin_unlock_bh(&moxa_lock); + dcd = tty_port_carrier_raised(port); if (dcd) break; @@ -1144,7 +1160,7 @@ static int moxa_block_till_ready(struct tty_struct *tty, struct file *filp, } schedule(); } - finish_wait(&ch->port.open_wait, &wait); + finish_wait(&port->open_wait, &wait); return retval; } diff --git a/drivers/char/mwave/mwavedd.c b/drivers/char/mwave/mwavedd.c index 4f8d67fed29..94ad2c3bfc4 100644 --- a/drivers/char/mwave/mwavedd.c +++ b/drivers/char/mwave/mwavedd.c @@ -663,7 +663,7 @@ static int __init mwave_init(void) #if 0 /* sysfs */ memset(&mwave_device, 0, sizeof (struct device)); - snprintf(mwave_device.bus_id, BUS_ID_SIZE, "mwave"); + dev_set_name(&mwave_device, "mwave"); if (device_register(&mwave_device)) goto cleanup_error; diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index 04776691541..402c9f217f8 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -541,74 +541,21 @@ static unsigned char mxser_get_msr(int baseaddr, int mode, int port) return status; } -static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp, - struct mxser_port *port) +static int mxser_carrier_raised(struct tty_port *port) { - DECLARE_WAITQUEUE(wait, current); - int retval; - int do_clocal = 0; - unsigned long flags; - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || - test_bit(TTY_IO_ERROR, &tty->flags)) { - port->port.flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } + struct mxser_port *mp = container_of(port, struct mxser_port, port); + return (inb(mp->ioaddr + UART_MSR) & UART_MSR_DCD)?1:0; +} - if (tty->termios->c_cflag & CLOCAL) - do_clocal = 1; +static void mxser_raise_dtr_rts(struct tty_port *port) +{ + struct mxser_port *mp = container_of(port, struct mxser_port, port); + unsigned long flags; - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, port->port.count is dropped by one, so that - * mxser_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&port->port.open_wait, &wait); - - spin_lock_irqsave(&port->slock, flags); - if (!tty_hung_up_p(filp)) - port->port.count--; - spin_unlock_irqrestore(&port->slock, flags); - port->port.blocked_open++; - while (1) { - spin_lock_irqsave(&port->slock, flags); - outb(inb(port->ioaddr + UART_MCR) | - UART_MCR_DTR | UART_MCR_RTS, port->ioaddr + UART_MCR); - spin_unlock_irqrestore(&port->slock, flags); - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || !(port->port.flags & ASYNC_INITIALIZED)) { - if (port->port.flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; - break; - } - if (!(port->port.flags & ASYNC_CLOSING) && - (do_clocal || - (inb(port->ioaddr + UART_MSR) & UART_MSR_DCD))) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - schedule(); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&port->port.open_wait, &wait); - if (!tty_hung_up_p(filp)) - port->port.count++; - port->port.blocked_open--; - if (retval) - return retval; - port->port.flags |= ASYNC_NORMAL_ACTIVE; - return 0; + spin_lock_irqsave(&mp->slock, flags); + outb(inb(mp->ioaddr + UART_MCR) | + UART_MCR_DTR | UART_MCR_RTS, mp->ioaddr + UART_MCR); + spin_unlock_irqrestore(&mp->slock, flags); } static int mxser_set_baud(struct tty_struct *tty, long newspd) @@ -1087,14 +1034,14 @@ static int mxser_open(struct tty_struct *tty, struct file *filp) /* * Start up serial port */ - spin_lock_irqsave(&info->slock, flags); + spin_lock_irqsave(&info->port.lock, flags); info->port.count++; - spin_unlock_irqrestore(&info->slock, flags); + spin_unlock_irqrestore(&info->port.lock, flags); retval = mxser_startup(tty); if (retval) return retval; - retval = mxser_block_til_ready(tty, filp, info); + retval = tty_port_block_til_ready(&info->port, tty, filp); if (retval) return retval; @@ -1133,58 +1080,27 @@ static void mxser_flush_buffer(struct tty_struct *tty) static void mxser_close(struct tty_struct *tty, struct file *filp) { struct mxser_port *info = tty->driver_data; + struct tty_port *port = &info->port; unsigned long timeout; - unsigned long flags; if (tty->index == MXSER_PORTS) return; if (!info) return; - spin_lock_irqsave(&info->slock, flags); - - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&info->slock, flags); - return; - } - if ((tty->count == 1) && (info->port.count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. Info->port.count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk(KERN_ERR "mxser_close: bad serial port count; " - "tty->count is 1, info->port.count is %d\n", info->port.count); - info->port.count = 1; - } - if (--info->port.count < 0) { - printk(KERN_ERR "mxser_close: bad serial port count for " - "ttys%d: %d\n", tty->index, info->port.count); - info->port.count = 0; - } - if (info->port.count) { - spin_unlock_irqrestore(&info->slock, flags); + if (tty_port_close_start(port, tty, filp) == 0) return; - } - info->port.flags |= ASYNC_CLOSING; - spin_unlock_irqrestore(&info->slock, flags); + /* * Save the termios structure, since this port may have * separate termios for callout and dialin. + * + * FIXME: Can this go ? */ if (info->port.flags & ASYNC_NORMAL_ACTIVE) info->normal_termios = *tty->termios; /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, info->port.closing_wait); - /* * At this point we stop accepting input. To do this, we * disable the receive line status interrupts, and tell the * interrupt driver to stop checking the data ready bit in the @@ -1209,19 +1125,12 @@ static void mxser_close(struct tty_struct *tty, struct file *filp) } } mxser_shutdown(tty); - mxser_flush_buffer(tty); - tty_ldisc_flush(tty); - - tty->closing = 0; - tty_port_tty_set(&info->port, NULL); - if (info->port.blocked_open) { - if (info->port.close_delay) - schedule_timeout_interruptible(info->port.close_delay); - wake_up_interruptible(&info->port.open_wait); - } - info->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING); + /* Right now the tty_port set is done outside of the close_end helper + as we don't yet have everyone using refcounts */ + tty_port_close_end(port, tty); + tty_port_tty_set(port, NULL); } static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count) @@ -2146,10 +2055,7 @@ static void mxser_hangup(struct tty_struct *tty) mxser_flush_buffer(tty); mxser_shutdown(tty); - info->port.count = 0; - info->port.flags &= ~ASYNC_NORMAL_ACTIVE; - tty_port_tty_set(&info->port, NULL); - wake_up_interruptible(&info->port.open_wait); + tty_port_hangup(&info->port); } /* @@ -2449,6 +2355,11 @@ static const struct tty_operations mxser_ops = { .tiocmset = mxser_tiocmset, }; +struct tty_port_operations mxser_port_ops = { + .carrier_raised = mxser_carrier_raised, + .raise_dtr_rts = mxser_raise_dtr_rts, +}; + /* * The MOXA Smartio/Industio serial driver boot-time initialization code! */ @@ -2482,6 +2393,7 @@ static int __devinit mxser_initbrd(struct mxser_board *brd, for (i = 0; i < brd->info->nports; i++) { info = &brd->ports[i]; tty_port_init(&info->port); + info->port.ops = &mxser_port_ops; info->board = brd; info->stop_rx = 0; info->ldisc_stop_rx = 0; diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c index 4a8215a89ad..d2e93e34322 100644 --- a/drivers/char/n_r3964.c +++ b/drivers/char/n_r3964.c @@ -1003,7 +1003,7 @@ static int r3964_open(struct tty_struct *tty) static void r3964_close(struct tty_struct *tty) { - struct r3964_info *pInfo = (struct r3964_info *)tty->disc_data; + struct r3964_info *pInfo = tty->disc_data; struct r3964_client_info *pClient, *pNext; struct r3964_message *pMsg; struct r3964_block_header *pHeader, *pNextHeader; @@ -1058,7 +1058,7 @@ static void r3964_close(struct tty_struct *tty) static ssize_t r3964_read(struct tty_struct *tty, struct file *file, unsigned char __user * buf, size_t nr) { - struct r3964_info *pInfo = (struct r3964_info *)tty->disc_data; + struct r3964_info *pInfo = tty->disc_data; struct r3964_client_info *pClient; struct r3964_message *pMsg; struct r3964_client_message theMsg; @@ -1113,7 +1113,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file, static ssize_t r3964_write(struct tty_struct *tty, struct file *file, const unsigned char *data, size_t count) { - struct r3964_info *pInfo = (struct r3964_info *)tty->disc_data; + struct r3964_info *pInfo = tty->disc_data; struct r3964_block_header *pHeader; struct r3964_client_info *pClient; unsigned char *new_data; @@ -1182,7 +1182,7 @@ static ssize_t r3964_write(struct tty_struct *tty, struct file *file, static int r3964_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { - struct r3964_info *pInfo = (struct r3964_info *)tty->disc_data; + struct r3964_info *pInfo = tty->disc_data; if (pInfo == NULL) return -EINVAL; switch (cmd) { @@ -1216,7 +1216,7 @@ static void r3964_set_termios(struct tty_struct *tty, struct ktermios *old) static unsigned int r3964_poll(struct tty_struct *tty, struct file *file, struct poll_table_struct *wait) { - struct r3964_info *pInfo = (struct r3964_info *)tty->disc_data; + struct r3964_info *pInfo = tty->disc_data; struct r3964_client_info *pClient; struct r3964_message *pMsg = NULL; unsigned long flags; @@ -1241,7 +1241,7 @@ static unsigned int r3964_poll(struct tty_struct *tty, struct file *file, static void r3964_receive_buf(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) { - struct r3964_info *pInfo = (struct r3964_info *)tty->disc_data; + struct r3964_info *pInfo = tty->disc_data; const unsigned char *p; char *f, flags = 0; int i; diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c index efbfe961265..f6f0e4ec2b5 100644 --- a/drivers/char/n_tty.c +++ b/drivers/char/n_tty.c @@ -47,8 +47,8 @@ #include <linux/bitops.h> #include <linux/audit.h> #include <linux/file.h> +#include <linux/uaccess.h> -#include <asm/uaccess.h> #include <asm/system.h> /* number of characters left in xmit buffer before select has we have room */ @@ -62,6 +62,17 @@ #define TTY_THRESHOLD_THROTTLE 128 /* now based on remaining room */ #define TTY_THRESHOLD_UNTHROTTLE 128 +/* + * Special byte codes used in the echo buffer to represent operations + * or special handling of characters. Bytes in the echo buffer that + * are not part of such special blocks are treated as normal character + * codes. + */ +#define ECHO_OP_START 0xff +#define ECHO_OP_MOVE_BACK_COL 0x80 +#define ECHO_OP_SET_CANON_COL 0x81 +#define ECHO_OP_ERASE_TAB 0x82 + static inline unsigned char *alloc_buf(void) { gfp_t prio = in_interrupt() ? GFP_ATOMIC : GFP_KERNEL; @@ -169,6 +180,7 @@ static void check_unthrottle(struct tty_struct *tty) * * Locking: tty_read_lock for read fields. */ + static void reset_buffer_flags(struct tty_struct *tty) { unsigned long flags; @@ -176,6 +188,11 @@ static void reset_buffer_flags(struct tty_struct *tty) spin_lock_irqsave(&tty->read_lock, flags); tty->read_head = tty->read_tail = tty->read_cnt = 0; spin_unlock_irqrestore(&tty->read_lock, flags); + + mutex_lock(&tty->echo_lock); + tty->echo_pos = tty->echo_cnt = tty->echo_overrun = 0; + mutex_unlock(&tty->echo_lock); + tty->canon_head = tty->canon_data = tty->erasing = 0; memset(&tty->read_flags, 0, sizeof tty->read_flags); n_tty_set_room(tty); @@ -266,89 +283,118 @@ static inline int is_continuation(unsigned char c, struct tty_struct *tty) } /** - * opost - output post processor + * do_output_char - output one character * @c: character (or partial unicode symbol) * @tty: terminal device + * @space: space available in tty driver write buffer * - * Perform OPOST processing. Returns -1 when the output device is - * full and the character must be retried. Note that Linux currently - * ignores TABDLY, CRDLY, VTDLY, FFDLY and NLDLY. They simply aren't - * relevant in the world today. If you ever need them, add them here. + * This is a helper function that handles one output character + * (including special characters like TAB, CR, LF, etc.), + * putting the results in the tty driver's write buffer. + * + * Note that Linux currently ignores TABDLY, CRDLY, VTDLY, FFDLY + * and NLDLY. They simply aren't relevant in the world today. + * If you ever need them, add them here. + * + * Returns the number of bytes of buffer space used or -1 if + * no space left. * - * Called from both the receive and transmit sides and can be called - * re-entrantly. Relies on lock_kernel() for tty->column state. + * Locking: should be called under the output_lock to protect + * the column state and space left in the buffer */ -static int opost(unsigned char c, struct tty_struct *tty) +static int do_output_char(unsigned char c, struct tty_struct *tty, int space) { - int space, spaces; + int spaces; - space = tty_write_room(tty); if (!space) return -1; - lock_kernel(); - if (O_OPOST(tty)) { - switch (c) { - case '\n': - if (O_ONLRET(tty)) - tty->column = 0; - if (O_ONLCR(tty)) { - if (space < 2) { - unlock_kernel(); - return -1; - } - tty_put_char(tty, '\r'); - tty->column = 0; - } - tty->canon_column = tty->column; - break; - case '\r': - if (O_ONOCR(tty) && tty->column == 0) { - unlock_kernel(); - return 0; - } - if (O_OCRNL(tty)) { - c = '\n'; - if (O_ONLRET(tty)) - tty->canon_column = tty->column = 0; - break; - } + switch (c) { + case '\n': + if (O_ONLRET(tty)) + tty->column = 0; + if (O_ONLCR(tty)) { + if (space < 2) + return -1; tty->canon_column = tty->column = 0; + tty_put_char(tty, '\r'); + tty_put_char(tty, c); + return 2; + } + tty->canon_column = tty->column; + break; + case '\r': + if (O_ONOCR(tty) && tty->column == 0) + return 0; + if (O_OCRNL(tty)) { + c = '\n'; + if (O_ONLRET(tty)) + tty->canon_column = tty->column = 0; break; - case '\t': - spaces = 8 - (tty->column & 7); - if (O_TABDLY(tty) == XTABS) { - if (space < spaces) { - unlock_kernel(); - return -1; - } - tty->column += spaces; - tty->ops->write(tty, " ", spaces); - unlock_kernel(); - return 0; - } + } + tty->canon_column = tty->column = 0; + break; + case '\t': + spaces = 8 - (tty->column & 7); + if (O_TABDLY(tty) == XTABS) { + if (space < spaces) + return -1; tty->column += spaces; - break; - case '\b': - if (tty->column > 0) - tty->column--; - break; - default: + tty->ops->write(tty, " ", spaces); + return spaces; + } + tty->column += spaces; + break; + case '\b': + if (tty->column > 0) + tty->column--; + break; + default: + if (!iscntrl(c)) { if (O_OLCUC(tty)) c = toupper(c); - if (!iscntrl(c) && !is_continuation(c, tty)) + if (!is_continuation(c, tty)) tty->column++; - break; } + break; } + tty_put_char(tty, c); - unlock_kernel(); - return 0; + return 1; } /** - * opost_block - block postprocess + * process_output - output post processor + * @c: character (or partial unicode symbol) + * @tty: terminal device + * + * Perform OPOST processing. Returns -1 when the output device is + * full and the character must be retried. + * + * Locking: output_lock to protect column state and space left + * (also, this is called from n_tty_write under the + * tty layer write lock) + */ + +static int process_output(unsigned char c, struct tty_struct *tty) +{ + int space, retval; + + mutex_lock(&tty->output_lock); + + space = tty_write_room(tty); + retval = do_output_char(c, tty, space); + + mutex_unlock(&tty->output_lock); + if (retval < 0) + return -1; + else + return 0; +} + +/** + * process_output_block - block post processor * @tty: terminal device * @inbuf: user buffer * @nr: number of bytes @@ -358,26 +404,32 @@ static int opost(unsigned char c, struct tty_struct *tty) * the simple cases normally found and helps to generate blocks of * symbols for the console driver and thus improve performance. * - * Called from n_tty_write under the tty layer write lock. Relies - * on lock_kernel for the tty->column state. + * Locking: output_lock to protect column state and space left + * (also, this is called from n_tty_write under the + * tty layer write lock) */ -static ssize_t opost_block(struct tty_struct *tty, - const unsigned char *buf, unsigned int nr) +static ssize_t process_output_block(struct tty_struct *tty, + const unsigned char *buf, unsigned int nr) { int space; int i; const unsigned char *cp; + mutex_lock(&tty->output_lock); + space = tty_write_room(tty); - if (!space) + if (!space) { + mutex_unlock(&tty->output_lock); return 0; + } if (nr > space) nr = space; - lock_kernel(); for (i = 0, cp = buf; i < nr; i++, cp++) { - switch (*cp) { + unsigned char c = *cp; + + switch (c) { case '\n': if (O_ONLRET(tty)) tty->column = 0; @@ -399,54 +451,403 @@ static ssize_t opost_block(struct tty_struct *tty, tty->column--; break; default: - if (O_OLCUC(tty)) - goto break_out; - if (!iscntrl(*cp)) - tty->column++; + if (!iscntrl(c)) { + if (O_OLCUC(tty)) + goto break_out; + if (!is_continuation(c, tty)) + tty->column++; + } break; } } break_out: - if (tty->ops->flush_chars) - tty->ops->flush_chars(tty); i = tty->ops->write(tty, buf, i); - unlock_kernel(); + + mutex_unlock(&tty->output_lock); return i; } +/** + * process_echoes - write pending echo characters + * @tty: terminal device + * + * Write previously buffered echo (and other ldisc-generated) + * characters to the tty. + * + * Characters generated by the ldisc (including echoes) need to + * be buffered because the driver's write buffer can fill during + * heavy program output. Echoing straight to the driver will + * often fail under these conditions, causing lost characters and + * resulting mismatches of ldisc state information. + * + * Since the ldisc state must represent the characters actually sent + * to the driver at the time of the write, operations like certain + * changes in column state are also saved in the buffer and executed + * here. + * + * A circular fifo buffer is used so that the most recent characters + * are prioritized. Also, when control characters are echoed with a + * prefixed "^", the pair is treated atomically and thus not separated. + * + * Locking: output_lock to protect column state and space left, + * echo_lock to protect the echo buffer + */ + +static void process_echoes(struct tty_struct *tty) +{ + int space, nr; + unsigned char c; + unsigned char *cp, *buf_end; + + if (!tty->echo_cnt) + return; + + mutex_lock(&tty->output_lock); + mutex_lock(&tty->echo_lock); + + space = tty_write_room(tty); + + buf_end = tty->echo_buf + N_TTY_BUF_SIZE; + cp = tty->echo_buf + tty->echo_pos; + nr = tty->echo_cnt; + while (nr > 0) { + c = *cp; + if (c == ECHO_OP_START) { + unsigned char op; + unsigned char *opp; + int no_space_left = 0; + + /* + * If the buffer byte is the start of a multi-byte + * operation, get the next byte, which is either the + * op code or a control character value. + */ + opp = cp + 1; + if (opp == buf_end) + opp -= N_TTY_BUF_SIZE; + op = *opp; + + switch (op) { + unsigned int num_chars, num_bs; + + case ECHO_OP_ERASE_TAB: + if (++opp == buf_end) + opp -= N_TTY_BUF_SIZE; + num_chars = *opp; + + /* + * Determine how many columns to go back + * in order to erase the tab. + * This depends on the number of columns + * used by other characters within the tab + * area. If this (modulo 8) count is from + * the start of input rather than from a + * previous tab, we offset by canon column. + * Otherwise, tab spacing is normal. + */ + if (!(num_chars & 0x80)) + num_chars += tty->canon_column; + num_bs = 8 - (num_chars & 7); + + if (num_bs > space) { + no_space_left = 1; + break; + } + space -= num_bs; + while (num_bs--) { + tty_put_char(tty, '\b'); + if (tty->column > 0) + tty->column--; + } + cp += 3; + nr -= 3; + break; + + case ECHO_OP_SET_CANON_COL: + tty->canon_column = tty->column; + cp += 2; + nr -= 2; + break; + + case ECHO_OP_MOVE_BACK_COL: + if (tty->column > 0) + tty->column--; + cp += 2; + nr -= 2; + break; + + case ECHO_OP_START: + /* This is an escaped echo op start code */ + if (!space) { + no_space_left = 1; + break; + } + tty_put_char(tty, ECHO_OP_START); + tty->column++; + space--; + cp += 2; + nr -= 2; + break; + + default: + if (iscntrl(op)) { + if (L_ECHOCTL(tty)) { + /* + * Ensure there is enough space + * for the whole ctrl pair. + */ + if (space < 2) { + no_space_left = 1; + break; + } + tty_put_char(tty, '^'); + tty_put_char(tty, op ^ 0100); + tty->column += 2; + space -= 2; + } else { + if (!space) { + no_space_left = 1; + break; + } + tty_put_char(tty, op); + space--; + } + } + /* + * If above falls through, this was an + * undefined op. + */ + cp += 2; + nr -= 2; + } + + if (no_space_left) + break; + } else { + int retval; + + retval = do_output_char(c, tty, space); + if (retval < 0) + break; + space -= retval; + cp += 1; + nr -= 1; + } + + /* When end of circular buffer reached, wrap around */ + if (cp >= buf_end) + cp -= N_TTY_BUF_SIZE; + } + + if (nr == 0) { + tty->echo_pos = 0; + tty->echo_cnt = 0; + tty->echo_overrun = 0; + } else { + int num_processed = tty->echo_cnt - nr; + tty->echo_pos += num_processed; + tty->echo_pos &= N_TTY_BUF_SIZE - 1; + tty->echo_cnt = nr; + if (num_processed > 0) + tty->echo_overrun = 0; + } + + mutex_unlock(&tty->echo_lock); + mutex_unlock(&tty->output_lock); + + if (tty->ops->flush_chars) + tty->ops->flush_chars(tty); +} /** - * echo_char - echo characters + * add_echo_byte - add a byte to the echo buffer + * @c: unicode byte to echo + * @tty: terminal device + * + * Add a character or operation byte to the echo buffer. + * + * Should be called under the echo lock to protect the echo buffer. + */ + +static void add_echo_byte(unsigned char c, struct tty_struct *tty) +{ + int new_byte_pos; + + if (tty->echo_cnt == N_TTY_BUF_SIZE) { + /* Circular buffer is already at capacity */ + new_byte_pos = tty->echo_pos; + + /* + * Since the buffer start position needs to be advanced, + * be sure to step by a whole operation byte group. + */ + if (tty->echo_buf[tty->echo_pos] == ECHO_OP_START) { + if (tty->echo_buf[(tty->echo_pos + 1) & + (N_TTY_BUF_SIZE - 1)] == + ECHO_OP_ERASE_TAB) { + tty->echo_pos += 3; + tty->echo_cnt -= 2; + } else { + tty->echo_pos += 2; + tty->echo_cnt -= 1; + } + } else { + tty->echo_pos++; + } + tty->echo_pos &= N_TTY_BUF_SIZE - 1; + + tty->echo_overrun = 1; + } else { + new_byte_pos = tty->echo_pos + tty->echo_cnt; + new_byte_pos &= N_TTY_BUF_SIZE - 1; + tty->echo_cnt++; + } + + tty->echo_buf[new_byte_pos] = c; +} + +/** + * echo_move_back_col - add operation to move back a column + * @tty: terminal device + * + * Add an operation to the echo buffer to move back one column. + * + * Locking: echo_lock to protect the echo buffer + */ + +static void echo_move_back_col(struct tty_struct *tty) +{ + mutex_lock(&tty->echo_lock); + + add_echo_byte(ECHO_OP_START, tty); + add_echo_byte(ECHO_OP_MOVE_BACK_COL, tty); + + mutex_unlock(&tty->echo_lock); +} + +/** + * echo_set_canon_col - add operation to set the canon column + * @tty: terminal device + * + * Add an operation to the echo buffer to set the canon column + * to the current column. + * + * Locking: echo_lock to protect the echo buffer + */ + +static void echo_set_canon_col(struct tty_struct *tty) +{ + mutex_lock(&tty->echo_lock); + + add_echo_byte(ECHO_OP_START, tty); + add_echo_byte(ECHO_OP_SET_CANON_COL, tty); + + mutex_unlock(&tty->echo_lock); +} + +/** + * echo_erase_tab - add operation to erase a tab + * @num_chars: number of character columns already used + * @after_tab: true if num_chars starts after a previous tab + * @tty: terminal device + * + * Add an operation to the echo buffer to erase a tab. + * + * Called by the eraser function, which knows how many character + * columns have been used since either a previous tab or the start + * of input. This information will be used later, along with + * canon column (if applicable), to go back the correct number + * of columns. + * + * Locking: echo_lock to protect the echo buffer + */ + +static void echo_erase_tab(unsigned int num_chars, int after_tab, + struct tty_struct *tty) +{ + mutex_lock(&tty->echo_lock); + + add_echo_byte(ECHO_OP_START, tty); + add_echo_byte(ECHO_OP_ERASE_TAB, tty); + + /* We only need to know this modulo 8 (tab spacing) */ + num_chars &= 7; + + /* Set the high bit as a flag if num_chars is after a previous tab */ + if (after_tab) + num_chars |= 0x80; + + add_echo_byte(num_chars, tty); + + mutex_unlock(&tty->echo_lock); +} + +/** + * echo_char_raw - echo a character raw * @c: unicode byte to echo * @tty: terminal device * * Echo user input back onto the screen. This must be called only when * L_ECHO(tty) is true. Called from the driver receive_buf path. * - * Relies on BKL for tty column locking + * This variant does not treat control characters specially. + * + * Locking: echo_lock to protect the echo buffer + */ + +static void echo_char_raw(unsigned char c, struct tty_struct *tty) +{ + mutex_lock(&tty->echo_lock); + + if (c == ECHO_OP_START) { + add_echo_byte(ECHO_OP_START, tty); + add_echo_byte(ECHO_OP_START, tty); + } else { + add_echo_byte(c, tty); + } + + mutex_unlock(&tty->echo_lock); +} + +/** + * echo_char - echo a character + * @c: unicode byte to echo + * @tty: terminal device + * + * Echo user input back onto the screen. This must be called only when + * L_ECHO(tty) is true. Called from the driver receive_buf path. + * + * This variant tags control characters to be possibly echoed as + * as "^X" (where X is the letter representing the control char). + * + * Locking: echo_lock to protect the echo buffer */ static void echo_char(unsigned char c, struct tty_struct *tty) { - if (L_ECHOCTL(tty) && iscntrl(c) && c != '\t') { - tty_put_char(tty, '^'); - tty_put_char(tty, c ^ 0100); - tty->column += 2; - } else - opost(c, tty); + mutex_lock(&tty->echo_lock); + + if (c == ECHO_OP_START) { + add_echo_byte(ECHO_OP_START, tty); + add_echo_byte(ECHO_OP_START, tty); + } else { + if (iscntrl(c) && c != '\t') + add_echo_byte(ECHO_OP_START, tty); + add_echo_byte(c, tty); + } + + mutex_unlock(&tty->echo_lock); } /** - * finsh_erasing - complete erase + * finish_erasing - complete erase * @tty: tty doing the erase - * - * Relies on BKL for tty column locking */ + static inline void finish_erasing(struct tty_struct *tty) { if (tty->erasing) { - tty_put_char(tty, '/'); - tty->column++; + echo_char_raw('/', tty); tty->erasing = 0; } } @@ -460,7 +861,7 @@ static inline void finish_erasing(struct tty_struct *tty) * present in the stream from the driver layer. Handles the complexities * of UTF-8 multibyte symbols. * - * Locking: read_lock for tty buffers, BKL for column/erasing state + * Locking: read_lock for tty buffers */ static void eraser(unsigned char c, struct tty_struct *tty) @@ -471,7 +872,7 @@ static void eraser(unsigned char c, struct tty_struct *tty) /* FIXME: locking needed ? */ if (tty->read_head == tty->canon_head) { - /* opost('\a', tty); */ /* what do you think? */ + /* process_output('\a', tty); */ /* what do you think? */ return; } if (c == ERASE_CHAR(tty)) @@ -497,7 +898,7 @@ static void eraser(unsigned char c, struct tty_struct *tty) echo_char(KILL_CHAR(tty), tty); /* Add a newline if ECHOK is on and ECHOKE is off. */ if (L_ECHOK(tty)) - opost('\n', tty); + echo_char_raw('\n', tty); return; } kill_type = KILL; @@ -533,67 +934,61 @@ static void eraser(unsigned char c, struct tty_struct *tty) if (L_ECHO(tty)) { if (L_ECHOPRT(tty)) { if (!tty->erasing) { - tty_put_char(tty, '\\'); - tty->column++; + echo_char_raw('\\', tty); tty->erasing = 1; } /* if cnt > 1, output a multi-byte character */ echo_char(c, tty); while (--cnt > 0) { head = (head+1) & (N_TTY_BUF_SIZE-1); - tty_put_char(tty, tty->read_buf[head]); + echo_char_raw(tty->read_buf[head], tty); + echo_move_back_col(tty); } } else if (kill_type == ERASE && !L_ECHOE(tty)) { echo_char(ERASE_CHAR(tty), tty); } else if (c == '\t') { - unsigned int col = tty->canon_column; - unsigned long tail = tty->canon_head; - - /* Find the column of the last char. */ - while (tail != tty->read_head) { + unsigned int num_chars = 0; + int after_tab = 0; + unsigned long tail = tty->read_head; + + /* + * Count the columns used for characters + * since the start of input or after a + * previous tab. + * This info is used to go back the correct + * number of columns. + */ + while (tail != tty->canon_head) { + tail = (tail-1) & (N_TTY_BUF_SIZE-1); c = tty->read_buf[tail]; - if (c == '\t') - col = (col | 7) + 1; - else if (iscntrl(c)) { + if (c == '\t') { + after_tab = 1; + break; + } else if (iscntrl(c)) { if (L_ECHOCTL(tty)) - col += 2; - } else if (!is_continuation(c, tty)) - col++; - tail = (tail+1) & (N_TTY_BUF_SIZE-1); - } - - /* should never happen */ - if (tty->column > 0x80000000) - tty->column = 0; - - /* Now backup to that column. */ - while (tty->column > col) { - /* Can't use opost here. */ - tty_put_char(tty, '\b'); - if (tty->column > 0) - tty->column--; + num_chars += 2; + } else if (!is_continuation(c, tty)) { + num_chars++; + } } + echo_erase_tab(num_chars, after_tab, tty); } else { if (iscntrl(c) && L_ECHOCTL(tty)) { - tty_put_char(tty, '\b'); - tty_put_char(tty, ' '); - tty_put_char(tty, '\b'); - if (tty->column > 0) - tty->column--; + echo_char_raw('\b', tty); + echo_char_raw(' ', tty); + echo_char_raw('\b', tty); } if (!iscntrl(c) || L_ECHOCTL(tty)) { - tty_put_char(tty, '\b'); - tty_put_char(tty, ' '); - tty_put_char(tty, '\b'); - if (tty->column > 0) - tty->column--; + echo_char_raw('\b', tty); + echo_char_raw(' ', tty); + echo_char_raw('\b', tty); } } } if (kill_type == ERASE) break; } - if (tty->read_head == tty->canon_head) + if (tty->read_head == tty->canon_head && L_ECHO(tty)) finish_erasing(tty); } @@ -712,6 +1107,7 @@ static inline void n_tty_receive_parity_error(struct tty_struct *tty, static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) { unsigned long flags; + int parmrk; if (tty->raw) { put_tty_queue(c, tty); @@ -721,18 +1117,21 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) if (I_ISTRIP(tty)) c &= 0x7f; if (I_IUCLC(tty) && L_IEXTEN(tty)) - c=tolower(c); + c = tolower(c); if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && - ((I_IXANY(tty) && c != START_CHAR(tty) && c != STOP_CHAR(tty)) || - c == INTR_CHAR(tty) || c == QUIT_CHAR(tty) || c == SUSP_CHAR(tty))) + I_IXANY(tty) && c != START_CHAR(tty) && c != STOP_CHAR(tty) && + c != INTR_CHAR(tty) && c != QUIT_CHAR(tty) && c != SUSP_CHAR(tty)) { start_tty(tty); + process_echoes(tty); + } if (tty->closing) { if (I_IXON(tty)) { - if (c == START_CHAR(tty)) + if (c == START_CHAR(tty)) { start_tty(tty); - else if (c == STOP_CHAR(tty)) + process_echoes(tty); + } else if (c == STOP_CHAR(tty)) stop_tty(tty); } return; @@ -745,19 +1144,23 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) * up. */ if (!test_bit(c, tty->process_char_map) || tty->lnext) { - finish_erasing(tty); tty->lnext = 0; + parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0; + if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) { + /* beep if no space */ + if (L_ECHO(tty)) + process_output('\a', tty); + return; + } if (L_ECHO(tty)) { - if (tty->read_cnt >= N_TTY_BUF_SIZE-1) { - tty_put_char(tty, '\a'); /* beep if no space */ - return; - } + finish_erasing(tty); /* Record the column of first canon char. */ if (tty->canon_head == tty->read_head) - tty->canon_column = tty->column; + echo_set_canon_col(tty); echo_char(c, tty); + process_echoes(tty); } - if (I_PARMRK(tty) && c == (unsigned char) '\377') + if (parmrk) put_tty_queue(c, tty); put_tty_queue(c, tty); return; @@ -766,6 +1169,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) if (I_IXON(tty)) { if (c == START_CHAR(tty)) { start_tty(tty); + process_echoes(tty); return; } if (c == STOP_CHAR(tty)) { @@ -786,7 +1190,6 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) if (c == SUSP_CHAR(tty)) { send_signal: /* - * Echo character, and then send the signal. * Note that we do not use isig() here because we want * the order to be: * 1) flush, 2) echo, 3) signal @@ -795,8 +1198,12 @@ send_signal: n_tty_flush_buffer(tty); tty_driver_flush_buffer(tty); } - if (L_ECHO(tty)) + if (I_IXON(tty)) + start_tty(tty); + if (L_ECHO(tty)) { echo_char(c, tty); + process_echoes(tty); + } if (tty->pgrp) kill_pgrp(tty->pgrp, signal, 1); return; @@ -815,6 +1222,7 @@ send_signal: if (c == ERASE_CHAR(tty) || c == KILL_CHAR(tty) || (c == WERASE_CHAR(tty) && L_IEXTEN(tty))) { eraser(c, tty); + process_echoes(tty); return; } if (c == LNEXT_CHAR(tty) && L_IEXTEN(tty)) { @@ -822,8 +1230,9 @@ send_signal: if (L_ECHO(tty)) { finish_erasing(tty); if (L_ECHOCTL(tty)) { - tty_put_char(tty, '^'); - tty_put_char(tty, '\b'); + echo_char_raw('^', tty); + echo_char_raw('\b', tty); + process_echoes(tty); } } return; @@ -834,22 +1243,29 @@ send_signal: finish_erasing(tty); echo_char(c, tty); - opost('\n', tty); + echo_char_raw('\n', tty); while (tail != tty->read_head) { echo_char(tty->read_buf[tail], tty); tail = (tail+1) & (N_TTY_BUF_SIZE-1); } + process_echoes(tty); return; } if (c == '\n') { + if (tty->read_cnt >= N_TTY_BUF_SIZE) { + if (L_ECHO(tty)) + process_output('\a', tty); + return; + } if (L_ECHO(tty) || L_ECHONL(tty)) { - if (tty->read_cnt >= N_TTY_BUF_SIZE-1) - tty_put_char(tty, '\a'); - opost('\n', tty); + echo_char_raw('\n', tty); + process_echoes(tty); } goto handle_newline; } if (c == EOF_CHAR(tty)) { + if (tty->read_cnt >= N_TTY_BUF_SIZE) + return; if (tty->canon_head != tty->read_head) set_bit(TTY_PUSH, &tty->flags); c = __DISABLED_CHAR; @@ -857,22 +1273,28 @@ send_signal: } if ((c == EOL_CHAR(tty)) || (c == EOL2_CHAR(tty) && L_IEXTEN(tty))) { + parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) + ? 1 : 0; + if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk)) { + if (L_ECHO(tty)) + process_output('\a', tty); + return; + } /* * XXX are EOL_CHAR and EOL2_CHAR echoed?!? */ if (L_ECHO(tty)) { - if (tty->read_cnt >= N_TTY_BUF_SIZE-1) - tty_put_char(tty, '\a'); /* Record the column of first canon char. */ if (tty->canon_head == tty->read_head) - tty->canon_column = tty->column; + echo_set_canon_col(tty); echo_char(c, tty); + process_echoes(tty); } /* * XXX does PARMRK doubling happen for * EOL_CHAR and EOL2_CHAR? */ - if (I_PARMRK(tty) && c == (unsigned char) '\377') + if (parmrk) put_tty_queue(c, tty); handle_newline: @@ -889,23 +1311,27 @@ handle_newline: } } - finish_erasing(tty); + parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0; + if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) { + /* beep if no space */ + if (L_ECHO(tty)) + process_output('\a', tty); + return; + } if (L_ECHO(tty)) { - if (tty->read_cnt >= N_TTY_BUF_SIZE-1) { - tty_put_char(tty, '\a'); /* beep if no space */ - return; - } + finish_erasing(tty); if (c == '\n') - opost('\n', tty); + echo_char_raw('\n', tty); else { /* Record the column of first canon char. */ if (tty->canon_head == tty->read_head) - tty->canon_column = tty->column; + echo_set_canon_col(tty); echo_char(c, tty); } + process_echoes(tty); } - if (I_PARMRK(tty) && c == (unsigned char) '\377') + if (parmrk) put_tty_queue(c, tty); put_tty_queue(c, tty); @@ -923,10 +1349,11 @@ handle_newline: static void n_tty_write_wakeup(struct tty_struct *tty) { - if (tty->fasync) { - set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); + /* Write out any echoed characters that are still pending */ + process_echoes(tty); + + if (tty->fasync && test_and_clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) kill_fasync(&tty->fasync, SIGIO, POLL_OUT); - } } /** @@ -1134,6 +1561,10 @@ static void n_tty_close(struct tty_struct *tty) free_buf(tty->read_buf); tty->read_buf = NULL; } + if (tty->echo_buf) { + free_buf(tty->echo_buf); + tty->echo_buf = NULL; + } } /** @@ -1151,13 +1582,19 @@ static int n_tty_open(struct tty_struct *tty) if (!tty) return -EINVAL; - /* This one is ugly. Currently a malloc failure here can panic */ + /* These are ugly. Currently a malloc failure here can panic */ if (!tty->read_buf) { tty->read_buf = alloc_buf(); if (!tty->read_buf) return -ENOMEM; } + if (!tty->echo_buf) { + tty->echo_buf = alloc_buf(); + if (!tty->echo_buf) + return -ENOMEM; + } memset(tty->read_buf, 0, N_TTY_BUF_SIZE); + memset(tty->echo_buf, 0, N_TTY_BUF_SIZE); reset_buffer_flags(tty); tty->column = 0; n_tty_set_termios(tty, NULL); @@ -1487,16 +1924,23 @@ do_it_again: * @buf: userspace buffer pointer * @nr: size of I/O * - * Write function of the terminal device. This is serialized with + * Write function of the terminal device. This is serialized with * respect to other write callers but not to termios changes, reads - * and other such events. We must be careful with N_TTY as the receive - * code will echo characters, thus calling driver write methods. + * and other such events. Since the receive code will echo characters, + * thus calling driver write methods, the output_lock is used in + * the output processing functions called here as well as in the + * echo processing function to protect the column state and space + * left in the buffer. * * This code must be sure never to sleep through a hangup. + * + * Locking: output_lock to protect column state and space left + * (note that the process_output*() functions take this + * lock themselves) */ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file, - const unsigned char *buf, size_t nr) + const unsigned char *buf, size_t nr) { const unsigned char *b = buf; DECLARE_WAITQUEUE(wait, current); @@ -1510,6 +1954,9 @@ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file, return retval; } + /* Write out any echoed characters that are still pending */ + process_echoes(tty); + add_wait_queue(&tty->write_wait, &wait); while (1) { set_current_state(TASK_INTERRUPTIBLE); @@ -1523,7 +1970,7 @@ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file, } if (O_OPOST(tty) && !(test_bit(TTY_HW_COOK_OUT, &tty->flags))) { while (nr > 0) { - ssize_t num = opost_block(tty, b, nr); + ssize_t num = process_output_block(tty, b, nr); if (num < 0) { if (num == -EAGAIN) break; @@ -1535,7 +1982,7 @@ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file, if (nr == 0) break; c = *b; - if (opost(c, tty) < 0) + if (process_output(c, tty) < 0) break; b++; nr--; } @@ -1565,6 +2012,8 @@ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file, break_out: __set_current_state(TASK_RUNNING); remove_wait_queue(&tty->write_wait, &wait); + if (b - buf != nr && tty->fasync) + set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); return (b - buf) ? b - buf : retval; } @@ -1663,4 +2112,3 @@ struct tty_ldisc_ops tty_ldisc_N_TTY = { .receive_buf = n_tty_receive_buf, .write_wakeup = n_tty_write_wakeup }; - diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c index 9a34a193528..d6102b644b5 100644 --- a/drivers/char/nozomi.c +++ b/drivers/char/nozomi.c @@ -353,6 +353,7 @@ struct ctrl_ul { /* This holds all information that is needed regarding a port */ struct port { + struct tty_port port; u8 update_flow_control; struct ctrl_ul ctrl_ul; struct ctrl_dl ctrl_dl; @@ -365,8 +366,6 @@ struct port { u8 toggle_ul; u16 token_dl; - struct tty_struct *tty; - int tty_open_count; /* mutex to ensure one access patch to this port */ struct mutex tty_sem; wait_queue_head_t tty_wait; @@ -788,14 +787,14 @@ static void disable_transmit_dl(enum port_type port, struct nozomi *dc) * Return 1 - send buffer to card and ack. * Return 0 - don't ack, don't send buffer to card. */ -static int send_data(enum port_type index, const struct nozomi *dc) +static int send_data(enum port_type index, struct nozomi *dc) { u32 size = 0; - const struct port *port = &dc->port[index]; + struct port *port = &dc->port[index]; const u8 toggle = port->toggle_ul; void __iomem *addr = port->ul_addr[toggle]; const u32 ul_size = port->ul_size[toggle]; - struct tty_struct *tty = port->tty; + struct tty_struct *tty = tty_port_tty_get(&port->port); /* Get data from tty and place in buf for now */ size = __kfifo_get(port->fifo_ul, dc->send_buf, @@ -803,6 +802,7 @@ static int send_data(enum port_type index, const struct nozomi *dc) if (size == 0) { DBG4("No more data to send, disable link:"); + tty_kref_put(tty); return 0; } @@ -815,6 +815,7 @@ static int send_data(enum port_type index, const struct nozomi *dc) if (tty) tty_wakeup(tty); + tty_kref_put(tty); return 1; } @@ -826,7 +827,7 @@ static int receive_data(enum port_type index, struct nozomi *dc) u32 offset = 4; struct port *port = &dc->port[index]; void __iomem *addr = port->dl_addr[port->toggle_dl]; - struct tty_struct *tty = port->tty; + struct tty_struct *tty = tty_port_tty_get(&port->port); int i; if (unlikely(!tty)) { @@ -870,7 +871,7 @@ static int receive_data(enum port_type index, struct nozomi *dc) } set_bit(index, &dc->flip); - + tty_kref_put(tty); return 1; } @@ -1276,9 +1277,15 @@ static irqreturn_t interrupt_handler(int irq, void *dev_id) exit_handler: spin_unlock(&dc->spin_mutex); - for (a = 0; a < NOZOMI_MAX_PORTS; a++) - if (test_and_clear_bit(a, &dc->flip)) - tty_flip_buffer_push(dc->port[a].tty); + for (a = 0; a < NOZOMI_MAX_PORTS; a++) { + struct tty_struct *tty; + if (test_and_clear_bit(a, &dc->flip)) { + tty = tty_port_tty_get(&dc->port[a].port); + if (tty) + tty_flip_buffer_push(tty); + tty_kref_put(tty); + } + } return IRQ_HANDLED; none: spin_unlock(&dc->spin_mutex); @@ -1453,12 +1460,10 @@ static int __devinit nozomi_card_init(struct pci_dev *pdev, for (i = 0; i < MAX_PORT; i++) { mutex_init(&dc->port[i].tty_sem); - dc->port[i].tty_open_count = 0; - dc->port[i].tty = NULL; + tty_port_init(&dc->port[i].port); tty_register_device(ntty_driver, dc->index_start + i, &pdev->dev); } - return 0; err_free_sbuf: @@ -1482,14 +1487,16 @@ static void __devexit tty_exit(struct nozomi *dc) flush_scheduled_work(); - for (i = 0; i < MAX_PORT; ++i) - if (dc->port[i].tty && \ - list_empty(&dc->port[i].tty->hangup_work.entry)) - tty_hangup(dc->port[i].tty); - + for (i = 0; i < MAX_PORT; ++i) { + struct tty_struct *tty = tty_port_tty_get(&dc->port[i].port); + if (tty && list_empty(&tty->hangup_work.entry)) + tty_hangup(tty); + tty_kref_put(tty); + } + /* Racy below - surely should wait for scheduled work to be done or + complete off a hangup method ? */ while (dc->open_ttys) msleep(1); - for (i = dc->index_start; i < dc->index_start + MAX_PORT; ++i) tty_unregister_device(ntty_driver, i); } @@ -1579,23 +1586,22 @@ static int ntty_open(struct tty_struct *tty, struct file *file) if (mutex_lock_interruptible(&port->tty_sem)) return -ERESTARTSYS; - port->tty_open_count++; + port->port.count++; dc->open_ttys++; /* Enable interrupt downlink for channel */ - if (port->tty_open_count == 1) { + if (port->port.count == 1) { + /* FIXME: is this needed now ? */ tty->low_latency = 1; tty->driver_data = port; - port->tty = tty; + tty_port_tty_set(&port->port, tty); DBG1("open: %d", port->token_dl); spin_lock_irqsave(&dc->spin_mutex, flags); dc->last_ier = dc->last_ier | port->token_dl; writew(dc->last_ier, dc->reg_ier); spin_unlock_irqrestore(&dc->spin_mutex, flags); } - mutex_unlock(&port->tty_sem); - return 0; } @@ -1606,31 +1612,30 @@ static int ntty_open(struct tty_struct *tty, struct file *file) static void ntty_close(struct tty_struct *tty, struct file *file) { struct nozomi *dc = get_dc_by_tty(tty); - struct port *port = tty->driver_data; + struct port *nport = tty->driver_data; + struct tty_port *port = &nport->port; unsigned long flags; - if (!dc || !port) + if (!dc || !nport) return; - if (mutex_lock_interruptible(&port->tty_sem)) - return; + /* Users cannot interrupt a close */ + mutex_lock(&nport->tty_sem); - if (!port->tty_open_count) - goto exit; + WARN_ON(!port->count); dc->open_ttys--; - port->tty_open_count--; + port->count--; + tty_port_tty_set(port, NULL); - if (port->tty_open_count == 0) { - DBG1("close: %d", port->token_dl); + if (port->count == 0) { + DBG1("close: %d", nport->token_dl); spin_lock_irqsave(&dc->spin_mutex, flags); - dc->last_ier &= ~(port->token_dl); + dc->last_ier &= ~(nport->token_dl); writew(dc->last_ier, dc->reg_ier); spin_unlock_irqrestore(&dc->spin_mutex, flags); } - -exit: - mutex_unlock(&port->tty_sem); + mutex_unlock(&nport->tty_sem); } /* @@ -1660,7 +1665,7 @@ static int ntty_write(struct tty_struct *tty, const unsigned char *buffer, return -EAGAIN; } - if (unlikely(!port->tty_open_count)) { + if (unlikely(!port->port.count)) { DBG1(" "); goto exit; } @@ -1710,7 +1715,7 @@ static int ntty_write_room(struct tty_struct *tty) if (!mutex_trylock(&port->tty_sem)) return 0; - if (!port->tty_open_count) + if (!port->port.count) goto exit; room = port->fifo_ul->size - __kfifo_len(port->fifo_ul); @@ -1866,7 +1871,7 @@ static s32 ntty_chars_in_buffer(struct tty_struct *tty) goto exit_in_buffer; } - if (unlikely(!port->tty_open_count)) { + if (unlikely(!port->port.count)) { dev_err(&dc->pdev->dev, "No tty open?\n"); rval = -ENODEV; goto exit_in_buffer; diff --git a/drivers/char/nvram.c b/drivers/char/nvram.c index 8054ee839b3..88cee4099be 100644 --- a/drivers/char/nvram.c +++ b/drivers/char/nvram.c @@ -32,9 +32,10 @@ * added changelog * 1.2 Erik Gilling: Cobalt Networks support * Tim Hockin: general cleanup, Cobalt support + * 1.3 Wim Van Sebroeck: convert PRINT_PROC to seq_file */ -#define NVRAM_VERSION "1.2" +#define NVRAM_VERSION "1.3" #include <linux/module.h> #include <linux/smp_lock.h> @@ -46,7 +47,7 @@ /* select machine configuration */ #if defined(CONFIG_ATARI) # define MACH ATARI -#elif defined(__i386__) || defined(__x86_64__) || defined(__arm__) /* and others?? */ +#elif defined(__i386__) || defined(__x86_64__) || defined(__arm__) /* and ?? */ # define MACH PC #else # error Cannot build nvram driver for this machine configuration. @@ -106,10 +107,11 @@ #include <linux/mc146818rtc.h> #include <linux/init.h> #include <linux/proc_fs.h> +#include <linux/seq_file.h> #include <linux/spinlock.h> +#include <linux/io.h> +#include <linux/uaccess.h> -#include <asm/io.h> -#include <asm/uaccess.h> #include <asm/system.h> static DEFINE_SPINLOCK(nvram_state_lock); @@ -122,8 +124,8 @@ static int mach_check_checksum(void); static void mach_set_checksum(void); #ifdef CONFIG_PROC_FS -static int mach_proc_infos(unsigned char *contents, char *buffer, int *len, - off_t *begin, off_t offset, int size); +static void mach_proc_infos(unsigned char *contents, struct seq_file *seq, + void *offset); #endif /* @@ -133,18 +135,17 @@ static int mach_proc_infos(unsigned char *contents, char *buffer, int *len, * * It is worth noting that these functions all access bytes of general * purpose memory in the NVRAM - that is to say, they all add the - * NVRAM_FIRST_BYTE offset. Pass them offsets into NVRAM as if you did not + * NVRAM_FIRST_BYTE offset. Pass them offsets into NVRAM as if you did not * know about the RTC cruft. */ -unsigned char -__nvram_read_byte(int i) +unsigned char __nvram_read_byte(int i) { return CMOS_READ(NVRAM_FIRST_BYTE + i); } +EXPORT_SYMBOL(__nvram_read_byte); -unsigned char -nvram_read_byte(int i) +unsigned char nvram_read_byte(int i) { unsigned long flags; unsigned char c; @@ -154,16 +155,16 @@ nvram_read_byte(int i) spin_unlock_irqrestore(&rtc_lock, flags); return c; } +EXPORT_SYMBOL(nvram_read_byte); /* This races nicely with trying to read with checksum checking (nvram_read) */ -void -__nvram_write_byte(unsigned char c, int i) +void __nvram_write_byte(unsigned char c, int i) { CMOS_WRITE(c, NVRAM_FIRST_BYTE + i); } +EXPORT_SYMBOL(__nvram_write_byte); -void -nvram_write_byte(unsigned char c, int i) +void nvram_write_byte(unsigned char c, int i) { unsigned long flags; @@ -171,15 +172,15 @@ nvram_write_byte(unsigned char c, int i) __nvram_write_byte(c, i); spin_unlock_irqrestore(&rtc_lock, flags); } +EXPORT_SYMBOL(nvram_write_byte); -int -__nvram_check_checksum(void) +int __nvram_check_checksum(void) { return mach_check_checksum(); } +EXPORT_SYMBOL(__nvram_check_checksum); -int -nvram_check_checksum(void) +int nvram_check_checksum(void) { unsigned long flags; int rv; @@ -189,16 +190,15 @@ nvram_check_checksum(void) spin_unlock_irqrestore(&rtc_lock, flags); return rv; } +EXPORT_SYMBOL(nvram_check_checksum); -static void -__nvram_set_checksum(void) +static void __nvram_set_checksum(void) { mach_set_checksum(); } #if 0 -void -nvram_set_checksum(void) +void nvram_set_checksum(void) { unsigned long flags; @@ -212,7 +212,7 @@ nvram_set_checksum(void) * The are the file operation function for user access to /dev/nvram */ -static loff_t nvram_llseek(struct file *file,loff_t offset, int origin ) +static loff_t nvram_llseek(struct file *file, loff_t offset, int origin) { lock_kernel(); switch (origin) { @@ -230,8 +230,8 @@ static loff_t nvram_llseek(struct file *file,loff_t offset, int origin ) return (offset >= 0) ? (file->f_pos = offset) : -EINVAL; } -static ssize_t -nvram_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) +static ssize_t nvram_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) { unsigned char contents[NVRAM_BYTES]; unsigned i = *ppos; @@ -254,13 +254,13 @@ nvram_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) return tmp - contents; - checksum_err: +checksum_err: spin_unlock_irq(&rtc_lock); return -EIO; } -static ssize_t -nvram_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) +static ssize_t nvram_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { unsigned char contents[NVRAM_BYTES]; unsigned i = *ppos; @@ -287,14 +287,13 @@ nvram_write(struct file *file, const char __user *buf, size_t count, loff_t *ppo return tmp - contents; - checksum_err: +checksum_err: spin_unlock_irq(&rtc_lock); return -EIO; } -static int -nvram_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static int nvram_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) { int i; @@ -315,7 +314,7 @@ nvram_ioctl(struct inode *inode, struct file *file, return 0; case NVRAM_SETCKS: - /* just set checksum, contents unchanged (maybe useful after + /* just set checksum, contents unchanged (maybe useful after * checksum garbaged somehow...) */ if (!capable(CAP_SYS_ADMIN)) return -EACCES; @@ -330,8 +329,7 @@ nvram_ioctl(struct inode *inode, struct file *file, } } -static int -nvram_open(struct inode *inode, struct file *file) +static int nvram_open(struct inode *inode, struct file *file) { lock_kernel(); spin_lock(&nvram_state_lock); @@ -356,8 +354,7 @@ nvram_open(struct inode *inode, struct file *file) return 0; } -static int -nvram_release(struct inode *inode, struct file *file) +static int nvram_release(struct inode *inode, struct file *file) { spin_lock(&nvram_state_lock); @@ -375,48 +372,47 @@ nvram_release(struct inode *inode, struct file *file) } #ifndef CONFIG_PROC_FS -static int -nvram_read_proc(char *buffer, char **start, off_t offset, - int size, int *eof, void *data) +static int nvram_add_proc_fs(void) { return 0; } + #else -static int -nvram_read_proc(char *buffer, char **start, off_t offset, - int size, int *eof, void *data) +static int nvram_proc_read(struct seq_file *seq, void *offset) { unsigned char contents[NVRAM_BYTES]; - int i, len = 0; - off_t begin = 0; + int i = 0; spin_lock_irq(&rtc_lock); for (i = 0; i < NVRAM_BYTES; ++i) contents[i] = __nvram_read_byte(i); spin_unlock_irq(&rtc_lock); - *eof = mach_proc_infos(contents, buffer, &len, &begin, offset, size); + mach_proc_infos(contents, seq, offset); - if (offset >= begin + len) - return 0; - *start = buffer + (offset - begin); - return (size < begin + len - offset) ? size : begin + len - offset; + return 0; +} +static int nvram_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, nvram_proc_read, NULL); } -/* This macro frees the machine specific function from bounds checking and - * this like that... */ -#define PRINT_PROC(fmt,args...) \ - do { \ - *len += sprintf(buffer+*len, fmt, ##args); \ - if (*begin + *len > offset + size) \ - return 0; \ - if (*begin + *len < offset) { \ - *begin += *len; \ - *len = 0; \ - } \ - } while(0) +static const struct file_operations nvram_proc_fops = { + .owner = THIS_MODULE, + .open = nvram_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int nvram_add_proc_fs(void) +{ + if (!proc_create("driver/nvram", 0, NULL, &nvram_proc_fops)) + return -ENOMEM; + return 0; +} #endif /* CONFIG_PROC_FS */ @@ -436,8 +432,7 @@ static struct miscdevice nvram_dev = { &nvram_fops }; -static int __init -nvram_init(void) +static int __init nvram_init(void) { int ret; @@ -451,23 +446,21 @@ nvram_init(void) NVRAM_MINOR); goto out; } - if (!create_proc_read_entry("driver/nvram", 0, NULL, nvram_read_proc, - NULL)) { + ret = nvram_add_proc_fs(); + if (ret) { printk(KERN_ERR "nvram: can't create /proc/driver/nvram\n"); - ret = -ENOMEM; goto outmisc; } ret = 0; printk(KERN_INFO "Non-volatile memory driver v" NVRAM_VERSION "\n"); - out: +out: return ret; - outmisc: +outmisc: misc_deregister(&nvram_dev); goto out; } -static void __exit -nvram_cleanup_module(void) +static void __exit nvram_cleanup_module(void) { remove_proc_entry("driver/nvram", NULL); misc_deregister(&nvram_dev); @@ -482,8 +475,7 @@ module_exit(nvram_cleanup_module); #if MACH == PC -static int -pc_check_checksum(void) +static int pc_check_checksum(void) { int i; unsigned short sum = 0; @@ -493,11 +485,10 @@ pc_check_checksum(void) sum += __nvram_read_byte(i); expect = __nvram_read_byte(PC_CKS_LOC)<<8 | __nvram_read_byte(PC_CKS_LOC+1); - return ((sum & 0xffff) == expect); + return (sum & 0xffff) == expect; } -static void -pc_set_checksum(void) +static void pc_set_checksum(void) { int i; unsigned short sum = 0; @@ -522,9 +513,8 @@ static char *gfx_types[] = { "monochrome", }; -static int -pc_proc_infos(unsigned char *nvram, char *buffer, int *len, - off_t *begin, off_t offset, int size) +static void pc_proc_infos(unsigned char *nvram, struct seq_file *seq, + void *offset) { int checksum; int type; @@ -533,56 +523,57 @@ pc_proc_infos(unsigned char *nvram, char *buffer, int *len, checksum = __nvram_check_checksum(); spin_unlock_irq(&rtc_lock); - PRINT_PROC("Checksum status: %svalid\n", checksum ? "" : "not "); + seq_printf(seq, "Checksum status: %svalid\n", checksum ? "" : "not "); - PRINT_PROC("# floppies : %d\n", + seq_printf(seq, "# floppies : %d\n", (nvram[6] & 1) ? (nvram[6] >> 6) + 1 : 0); - PRINT_PROC("Floppy 0 type : "); + seq_printf(seq, "Floppy 0 type : "); type = nvram[2] >> 4; if (type < ARRAY_SIZE(floppy_types)) - PRINT_PROC("%s\n", floppy_types[type]); + seq_printf(seq, "%s\n", floppy_types[type]); else - PRINT_PROC("%d (unknown)\n", type); - PRINT_PROC("Floppy 1 type : "); + seq_printf(seq, "%d (unknown)\n", type); + seq_printf(seq, "Floppy 1 type : "); type = nvram[2] & 0x0f; if (type < ARRAY_SIZE(floppy_types)) - PRINT_PROC("%s\n", floppy_types[type]); + seq_printf(seq, "%s\n", floppy_types[type]); else - PRINT_PROC("%d (unknown)\n", type); + seq_printf(seq, "%d (unknown)\n", type); - PRINT_PROC("HD 0 type : "); + seq_printf(seq, "HD 0 type : "); type = nvram[4] >> 4; if (type) - PRINT_PROC("%02x\n", type == 0x0f ? nvram[11] : type); + seq_printf(seq, "%02x\n", type == 0x0f ? nvram[11] : type); else - PRINT_PROC("none\n"); + seq_printf(seq, "none\n"); - PRINT_PROC("HD 1 type : "); + seq_printf(seq, "HD 1 type : "); type = nvram[4] & 0x0f; if (type) - PRINT_PROC("%02x\n", type == 0x0f ? nvram[12] : type); + seq_printf(seq, "%02x\n", type == 0x0f ? nvram[12] : type); else - PRINT_PROC("none\n"); + seq_printf(seq, "none\n"); - PRINT_PROC("HD type 48 data: %d/%d/%d C/H/S, precomp %d, lz %d\n", + seq_printf(seq, "HD type 48 data: %d/%d/%d C/H/S, precomp %d, lz %d\n", nvram[18] | (nvram[19] << 8), nvram[20], nvram[25], nvram[21] | (nvram[22] << 8), nvram[23] | (nvram[24] << 8)); - PRINT_PROC("HD type 49 data: %d/%d/%d C/H/S, precomp %d, lz %d\n", + seq_printf(seq, "HD type 49 data: %d/%d/%d C/H/S, precomp %d, lz %d\n", nvram[39] | (nvram[40] << 8), nvram[41], nvram[46], nvram[42] | (nvram[43] << 8), nvram[44] | (nvram[45] << 8)); - PRINT_PROC("DOS base memory: %d kB\n", nvram[7] | (nvram[8] << 8)); - PRINT_PROC("Extended memory: %d kB (configured), %d kB (tested)\n", + seq_printf(seq, "DOS base memory: %d kB\n", nvram[7] | (nvram[8] << 8)); + seq_printf(seq, "Extended memory: %d kB (configured), %d kB (tested)\n", nvram[9] | (nvram[10] << 8), nvram[34] | (nvram[35] << 8)); - PRINT_PROC("Gfx adapter : %s\n", gfx_types[(nvram[6] >> 4) & 3]); + seq_printf(seq, "Gfx adapter : %s\n", + gfx_types[(nvram[6] >> 4) & 3]); - PRINT_PROC("FPU : %sinstalled\n", + seq_printf(seq, "FPU : %sinstalled\n", (nvram[6] & 2) ? "" : "not "); - return 1; + return; } #endif @@ -590,20 +581,18 @@ pc_proc_infos(unsigned char *nvram, char *buffer, int *len, #if MACH == ATARI -static int -atari_check_checksum(void) +static int atari_check_checksum(void) { int i; unsigned char sum = 0; for (i = ATARI_CKS_RANGE_START; i <= ATARI_CKS_RANGE_END; ++i) sum += __nvram_read_byte(i); - return (__nvram_read_byte(ATARI_CKS_LOC) == (~sum & 0xff) && - __nvram_read_byte(ATARI_CKS_LOC + 1) == (sum & 0xff)); + return (__nvram_read_byte(ATARI_CKS_LOC) == (~sum & 0xff)) && + (__nvram_read_byte(ATARI_CKS_LOC + 1) == (sum & 0xff)); } -static void -atari_set_checksum(void) +static void atari_set_checksum(void) { int i; unsigned char sum = 0; @@ -654,82 +643,75 @@ static char *colors[] = { "2", "4", "16", "256", "65536", "??", "??", "??" }; -static int -atari_proc_infos(unsigned char *nvram, char *buffer, int *len, - off_t *begin, off_t offset, int size) +static void atari_proc_infos(unsigned char *nvram, struct seq_file *seq, + void *offset) { int checksum = nvram_check_checksum(); int i; unsigned vmode; - PRINT_PROC("Checksum status : %svalid\n", checksum ? "" : "not "); + seq_printf(seq, "Checksum status : %svalid\n", checksum ? "" : "not "); - PRINT_PROC("Boot preference : "); + seq_printf(seq, "Boot preference : "); for (i = ARRAY_SIZE(boot_prefs) - 1; i >= 0; --i) { if (nvram[1] == boot_prefs[i].val) { - PRINT_PROC("%s\n", boot_prefs[i].name); + seq_printf(seq, "%s\n", boot_prefs[i].name); break; } } if (i < 0) - PRINT_PROC("0x%02x (undefined)\n", nvram[1]); + seq_printf(seq, "0x%02x (undefined)\n", nvram[1]); - PRINT_PROC("SCSI arbitration : %s\n", + seq_printf(seq, "SCSI arbitration : %s\n", (nvram[16] & 0x80) ? "on" : "off"); - PRINT_PROC("SCSI host ID : "); + seq_printf(seq, "SCSI host ID : "); if (nvram[16] & 0x80) - PRINT_PROC("%d\n", nvram[16] & 7); + seq_printf(seq, "%d\n", nvram[16] & 7); else - PRINT_PROC("n/a\n"); + seq_printf(seq, "n/a\n"); /* the following entries are defined only for the Falcon */ if ((atari_mch_cookie >> 16) != ATARI_MCH_FALCON) - return 1; + return; - PRINT_PROC("OS language : "); + seq_printf(seq, "OS language : "); if (nvram[6] < ARRAY_SIZE(languages)) - PRINT_PROC("%s\n", languages[nvram[6]]); + seq_printf(seq, "%s\n", languages[nvram[6]]); else - PRINT_PROC("%u (undefined)\n", nvram[6]); - PRINT_PROC("Keyboard language: "); + seq_printf(seq, "%u (undefined)\n", nvram[6]); + seq_printf(seq, "Keyboard language: "); if (nvram[7] < ARRAY_SIZE(languages)) - PRINT_PROC("%s\n", languages[nvram[7]]); + seq_printf(seq, "%s\n", languages[nvram[7]]); else - PRINT_PROC("%u (undefined)\n", nvram[7]); - PRINT_PROC("Date format : "); - PRINT_PROC(dateformat[nvram[8] & 7], + seq_printf(seq, "%u (undefined)\n", nvram[7]); + seq_printf(seq, "Date format : "); + seq_printf(seq, dateformat[nvram[8] & 7], nvram[9] ? nvram[9] : '/', nvram[9] ? nvram[9] : '/'); - PRINT_PROC(", %dh clock\n", nvram[8] & 16 ? 24 : 12); - PRINT_PROC("Boot delay : "); + seq_printf(seq, ", %dh clock\n", nvram[8] & 16 ? 24 : 12); + seq_printf(seq, "Boot delay : "); if (nvram[10] == 0) - PRINT_PROC("default"); + seq_printf(seq, "default"); else - PRINT_PROC("%ds%s\n", nvram[10], + seq_printf(seq, "%ds%s\n", nvram[10], nvram[10] < 8 ? ", no memory test" : ""); vmode = (nvram[14] << 8) || nvram[15]; - PRINT_PROC("Video mode : %s colors, %d columns, %s %s monitor\n", + seq_printf(seq, + "Video mode : %s colors, %d columns, %s %s monitor\n", colors[vmode & 7], vmode & 8 ? 80 : 40, vmode & 16 ? "VGA" : "TV", vmode & 32 ? "PAL" : "NTSC"); - PRINT_PROC(" %soverscan, compat. mode %s%s\n", + seq_printf(seq, " %soverscan, compat. mode %s%s\n", vmode & 64 ? "" : "no ", vmode & 128 ? "on" : "off", vmode & 256 ? (vmode & 16 ? ", line doubling" : ", half screen") : ""); - return 1; + return; } #endif #endif /* MACH == ATARI */ MODULE_LICENSE("GPL"); - -EXPORT_SYMBOL(__nvram_read_byte); -EXPORT_SYMBOL(nvram_read_byte); -EXPORT_SYMBOL(__nvram_write_byte); -EXPORT_SYMBOL(nvram_write_byte); -EXPORT_SYMBOL(__nvram_check_checksum); -EXPORT_SYMBOL(nvram_check_checksum); MODULE_ALIAS_MISCDEV(NVRAM_MINOR); diff --git a/drivers/char/nwflash.c b/drivers/char/nwflash.c index 006be92ee3f..8c7df5ba088 100644 --- a/drivers/char/nwflash.c +++ b/drivers/char/nwflash.c @@ -58,8 +58,6 @@ static volatile unsigned char *FLASH_BASE; static int gbFlashSize = KFLASH_SIZE; static DEFINE_MUTEX(nwflash_mutex); -extern spinlock_t gpio_lock; - static int get_flash_id(void) { volatile unsigned int c1, c2; @@ -616,9 +614,9 @@ static void kick_open(void) * we want to write a bit pattern XXX1 to Xilinx to enable * the write gate, which will be open for about the next 2ms. */ - spin_lock_irqsave(&gpio_lock, flags); - cpld_modify(1, 1); - spin_unlock_irqrestore(&gpio_lock, flags); + spin_lock_irqsave(&nw_gpio_lock, flags); + nw_cpld_modify(CPLD_FLASH_WR_ENABLE, CPLD_FLASH_WR_ENABLE); + spin_unlock_irqrestore(&nw_gpio_lock, flags); /* * let the ISA bus to catch on... diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 4d64a02612a..dc073e167ab 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -138,20 +138,15 @@ struct _input_signal_events { */ typedef struct _mgslpc_info { + struct tty_port port; void *if_ptr; /* General purpose pointer (used by SPPP) */ int magic; - int flags; - int count; /* count of opens */ int line; - unsigned short close_delay; - unsigned short closing_wait; /* time to wait before closing */ struct mgsl_icount icount; - struct tty_struct *tty; int timeout; int x_char; /* xon/xoff character */ - int blocked_open; /* # of blocked opens */ unsigned char read_status_mask; unsigned char ignore_status_mask; @@ -170,9 +165,6 @@ typedef struct _mgslpc_info { int rx_buf_count; /* total number of rx buffers */ int rx_frame_count; /* number of full rx buffers */ - wait_queue_head_t open_wait; - wait_queue_head_t close_wait; - wait_queue_head_t status_event_wait_q; wait_queue_head_t event_wait_q; struct timer_list tx_timer; /* HDLC transmit timeout timer */ @@ -375,7 +367,7 @@ static void irq_enable(MGSLPC_INFO *info, unsigned char channel, unsigned short static void rx_start(MGSLPC_INFO *info); static void rx_stop(MGSLPC_INFO *info); -static void tx_start(MGSLPC_INFO *info); +static void tx_start(MGSLPC_INFO *info, struct tty_struct *tty); static void tx_stop(MGSLPC_INFO *info); static void tx_set_idle(MGSLPC_INFO *info); @@ -389,7 +381,8 @@ static void async_mode(MGSLPC_INFO *info); static void tx_timeout(unsigned long context); -static int ioctl_common(MGSLPC_INFO *info, unsigned int cmd, unsigned long arg); +static int carrier_raised(struct tty_port *port); +static void raise_dtr_rts(struct tty_port *port); #if SYNCLINK_GENERIC_HDLC #define dev_to_port(D) (dev_to_hdlc(D)->priv) @@ -410,7 +403,7 @@ static void release_resources(MGSLPC_INFO *info); static void mgslpc_add_device(MGSLPC_INFO *info); static void mgslpc_remove_device(MGSLPC_INFO *info); -static bool rx_get_frame(MGSLPC_INFO *info); +static bool rx_get_frame(MGSLPC_INFO *info, struct tty_struct *tty); static void rx_reset_buffers(MGSLPC_INFO *info); static int rx_alloc_buffers(MGSLPC_INFO *info); static void rx_free_buffers(MGSLPC_INFO *info); @@ -421,7 +414,7 @@ static irqreturn_t mgslpc_isr(int irq, void *dev_id); * Bottom half interrupt handlers */ static void bh_handler(struct work_struct *work); -static void bh_transmit(MGSLPC_INFO *info); +static void bh_transmit(MGSLPC_INFO *info, struct tty_struct *tty); static void bh_status(MGSLPC_INFO *info); /* @@ -432,10 +425,10 @@ static int tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); static int get_stats(MGSLPC_INFO *info, struct mgsl_icount __user *user_icount); static int get_params(MGSLPC_INFO *info, MGSL_PARAMS __user *user_params); -static int set_params(MGSLPC_INFO *info, MGSL_PARAMS __user *new_params); +static int set_params(MGSLPC_INFO *info, MGSL_PARAMS __user *new_params, struct tty_struct *tty); static int get_txidle(MGSLPC_INFO *info, int __user *idle_mode); static int set_txidle(MGSLPC_INFO *info, int idle_mode); -static int set_txenable(MGSLPC_INFO *info, int enable); +static int set_txenable(MGSLPC_INFO *info, int enable, struct tty_struct *tty); static int tx_abort(MGSLPC_INFO *info); static int set_rxenable(MGSLPC_INFO *info, int enable); static int wait_events(MGSLPC_INFO *info, int __user *mask); @@ -474,7 +467,7 @@ static struct tty_driver *serial_driver; /* number of characters left in xmit buffer before we ask for more */ #define WAKEUP_CHARS 256 -static void mgslpc_change_params(MGSLPC_INFO *info); +static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty); static void mgslpc_wait_until_sent(struct tty_struct *tty, int timeout); /* PCMCIA prototypes */ @@ -517,6 +510,11 @@ static void ldisc_receive_buf(struct tty_struct *tty, } } +static const struct tty_port_operations mgslpc_port_ops = { + .carrier_raised = carrier_raised, + .raise_dtr_rts = raise_dtr_rts +}; + static int mgslpc_probe(struct pcmcia_device *link) { MGSLPC_INFO *info; @@ -532,12 +530,12 @@ static int mgslpc_probe(struct pcmcia_device *link) } info->magic = MGSLPC_MAGIC; + tty_port_init(&info->port); + info->port.ops = &mgslpc_port_ops; INIT_WORK(&info->task, bh_handler); info->max_frame_size = 4096; - info->close_delay = 5*HZ/10; - info->closing_wait = 30*HZ; - init_waitqueue_head(&info->open_wait); - init_waitqueue_head(&info->close_wait); + info->port.close_delay = 5*HZ/10; + info->port.closing_wait = 30*HZ; init_waitqueue_head(&info->status_event_wait_q); init_waitqueue_head(&info->event_wait_q); spin_lock_init(&info->lock); @@ -784,7 +782,7 @@ static void tx_release(struct tty_struct *tty) spin_lock_irqsave(&info->lock,flags); if (!info->tx_enabled) - tx_start(info); + tx_start(info, tty); spin_unlock_irqrestore(&info->lock,flags); } @@ -823,6 +821,7 @@ static int bh_action(MGSLPC_INFO *info) static void bh_handler(struct work_struct *work) { MGSLPC_INFO *info = container_of(work, MGSLPC_INFO, task); + struct tty_struct *tty; int action; if (!info) @@ -833,6 +832,7 @@ static void bh_handler(struct work_struct *work) __FILE__,__LINE__,info->device_name); info->bh_running = true; + tty = tty_port_tty_get(&info->port); while((action = bh_action(info)) != 0) { @@ -844,10 +844,10 @@ static void bh_handler(struct work_struct *work) switch (action) { case BH_RECEIVE: - while(rx_get_frame(info)); + while(rx_get_frame(info, tty)); break; case BH_TRANSMIT: - bh_transmit(info); + bh_transmit(info, tty); break; case BH_STATUS: bh_status(info); @@ -859,14 +859,14 @@ static void bh_handler(struct work_struct *work) } } + tty_kref_put(tty); if (debug_level >= DEBUG_LEVEL_BH) printk( "%s(%d):bh_handler(%s) exit\n", __FILE__,__LINE__,info->device_name); } -static void bh_transmit(MGSLPC_INFO *info) +static void bh_transmit(MGSLPC_INFO *info, struct tty_struct *tty) { - struct tty_struct *tty = info->tty; if (debug_level >= DEBUG_LEVEL_BH) printk("bh_transmit() entry on %s\n", info->device_name); @@ -945,12 +945,11 @@ static void rx_ready_hdlc(MGSLPC_INFO *info, int eom) issue_command(info, CHA, CMD_RXFIFO); } -static void rx_ready_async(MGSLPC_INFO *info, int tcd) +static void rx_ready_async(MGSLPC_INFO *info, int tcd, struct tty_struct *tty) { unsigned char data, status, flag; int fifo_count; int work = 0; - struct tty_struct *tty = info->tty; struct mgsl_icount *icount = &info->icount; if (tcd) { @@ -1013,7 +1012,7 @@ static void rx_ready_async(MGSLPC_INFO *info, int tcd) } -static void tx_done(MGSLPC_INFO *info) +static void tx_done(MGSLPC_INFO *info, struct tty_struct *tty) { if (!info->tx_active) return; @@ -1042,7 +1041,7 @@ static void tx_done(MGSLPC_INFO *info) else #endif { - if (info->tty->stopped || info->tty->hw_stopped) { + if (tty->stopped || tty->hw_stopped) { tx_stop(info); return; } @@ -1050,7 +1049,7 @@ static void tx_done(MGSLPC_INFO *info) } } -static void tx_ready(MGSLPC_INFO *info) +static void tx_ready(MGSLPC_INFO *info, struct tty_struct *tty) { unsigned char fifo_count = 32; int c; @@ -1062,7 +1061,7 @@ static void tx_ready(MGSLPC_INFO *info) if (!info->tx_active) return; } else { - if (info->tty->stopped || info->tty->hw_stopped) { + if (tty->stopped || tty->hw_stopped) { tx_stop(info); return; } @@ -1099,7 +1098,7 @@ static void tx_ready(MGSLPC_INFO *info) } } -static void cts_change(MGSLPC_INFO *info) +static void cts_change(MGSLPC_INFO *info, struct tty_struct *tty) { get_signals(info); if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) @@ -1112,14 +1111,14 @@ static void cts_change(MGSLPC_INFO *info) wake_up_interruptible(&info->status_event_wait_q); wake_up_interruptible(&info->event_wait_q); - if (info->flags & ASYNC_CTS_FLOW) { - if (info->tty->hw_stopped) { + if (info->port.flags & ASYNC_CTS_FLOW) { + if (tty->hw_stopped) { if (info->serial_signals & SerialSignal_CTS) { if (debug_level >= DEBUG_LEVEL_ISR) printk("CTS tx start..."); - if (info->tty) - info->tty->hw_stopped = 0; - tx_start(info); + if (tty) + tty->hw_stopped = 0; + tx_start(info, tty); info->pending_bh |= BH_TRANSMIT; return; } @@ -1127,8 +1126,8 @@ static void cts_change(MGSLPC_INFO *info) if (!(info->serial_signals & SerialSignal_CTS)) { if (debug_level >= DEBUG_LEVEL_ISR) printk("CTS tx stop..."); - if (info->tty) - info->tty->hw_stopped = 1; + if (tty) + tty->hw_stopped = 1; tx_stop(info); } } @@ -1136,7 +1135,7 @@ static void cts_change(MGSLPC_INFO *info) info->pending_bh |= BH_STATUS; } -static void dcd_change(MGSLPC_INFO *info) +static void dcd_change(MGSLPC_INFO *info, struct tty_struct *tty) { get_signals(info); if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) @@ -1158,17 +1157,17 @@ static void dcd_change(MGSLPC_INFO *info) wake_up_interruptible(&info->status_event_wait_q); wake_up_interruptible(&info->event_wait_q); - if (info->flags & ASYNC_CHECK_CD) { + if (info->port.flags & ASYNC_CHECK_CD) { if (debug_level >= DEBUG_LEVEL_ISR) printk("%s CD now %s...", info->device_name, (info->serial_signals & SerialSignal_DCD) ? "on" : "off"); if (info->serial_signals & SerialSignal_DCD) - wake_up_interruptible(&info->open_wait); + wake_up_interruptible(&info->port.open_wait); else { if (debug_level >= DEBUG_LEVEL_ISR) printk("doing serial hangup..."); - if (info->tty) - tty_hangup(info->tty); + if (tty) + tty_hangup(tty); } } info->pending_bh |= BH_STATUS; @@ -1214,6 +1213,7 @@ static void ri_change(MGSLPC_INFO *info) static irqreturn_t mgslpc_isr(int dummy, void *dev_id) { MGSLPC_INFO *info = dev_id; + struct tty_struct *tty; unsigned short isr; unsigned char gis, pis; int count=0; @@ -1224,6 +1224,8 @@ static irqreturn_t mgslpc_isr(int dummy, void *dev_id) if (!(info->p_dev->_locked)) return IRQ_HANDLED; + tty = tty_port_tty_get(&info->port); + spin_lock(&info->lock); while ((gis = read_reg(info, CHA + GIS))) { @@ -1239,9 +1241,9 @@ static irqreturn_t mgslpc_isr(int dummy, void *dev_id) if (gis & (BIT1 + BIT0)) { isr = read_reg16(info, CHB + ISR); if (isr & IRQ_DCD) - dcd_change(info); + dcd_change(info, tty); if (isr & IRQ_CTS) - cts_change(info); + cts_change(info, tty); } if (gis & (BIT3 + BIT2)) { @@ -1258,8 +1260,8 @@ static irqreturn_t mgslpc_isr(int dummy, void *dev_id) } if (isr & IRQ_BREAK_ON) { info->icount.brk++; - if (info->flags & ASYNC_SAK) - do_SAK(info->tty); + if (info->port.flags & ASYNC_SAK) + do_SAK(tty); } if (isr & IRQ_RXTIME) { issue_command(info, CHA, CMD_RXFIFO_READ); @@ -1268,7 +1270,7 @@ static irqreturn_t mgslpc_isr(int dummy, void *dev_id) if (info->params.mode == MGSL_MODE_HDLC) rx_ready_hdlc(info, isr & IRQ_RXEOM); else - rx_ready_async(info, isr & IRQ_RXEOM); + rx_ready_async(info, isr & IRQ_RXEOM, tty); } /* transmit IRQs */ @@ -1277,14 +1279,14 @@ static irqreturn_t mgslpc_isr(int dummy, void *dev_id) info->icount.txabort++; else info->icount.txunder++; - tx_done(info); + tx_done(info, tty); } else if (isr & IRQ_ALLSENT) { info->icount.txok++; - tx_done(info); + tx_done(info, tty); } else if (isr & IRQ_TXFIFO) - tx_ready(info); + tx_ready(info, tty); } if (gis & BIT7) { pis = read_reg(info, CHA + PIS); @@ -1308,6 +1310,7 @@ static irqreturn_t mgslpc_isr(int dummy, void *dev_id) } spin_unlock(&info->lock); + tty_kref_put(tty); if (debug_level >= DEBUG_LEVEL_ISR) printk("%s(%d):mgslpc_isr(%d)exit.\n", @@ -1318,14 +1321,14 @@ static irqreturn_t mgslpc_isr(int dummy, void *dev_id) /* Initialize and start device. */ -static int startup(MGSLPC_INFO * info) +static int startup(MGSLPC_INFO * info, struct tty_struct *tty) { int retval = 0; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):startup(%s)\n",__FILE__,__LINE__,info->device_name); - if (info->flags & ASYNC_INITIALIZED) + if (info->port.flags & ASYNC_INITIALIZED) return 0; if (!info->tx_buf) { @@ -1352,30 +1355,30 @@ static int startup(MGSLPC_INFO * info) retval = adapter_test(info); if ( retval ) { - if (capable(CAP_SYS_ADMIN) && info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); + if (capable(CAP_SYS_ADMIN) && tty) + set_bit(TTY_IO_ERROR, &tty->flags); release_resources(info); return retval; } /* program hardware for current parameters */ - mgslpc_change_params(info); + mgslpc_change_params(info, tty); - if (info->tty) - clear_bit(TTY_IO_ERROR, &info->tty->flags); + if (tty) + clear_bit(TTY_IO_ERROR, &tty->flags); - info->flags |= ASYNC_INITIALIZED; + info->port.flags |= ASYNC_INITIALIZED; return 0; } /* Called by mgslpc_close() and mgslpc_hangup() to shutdown hardware */ -static void shutdown(MGSLPC_INFO * info) +static void shutdown(MGSLPC_INFO * info, struct tty_struct *tty) { unsigned long flags; - if (!(info->flags & ASYNC_INITIALIZED)) + if (!(info->port.flags & ASYNC_INITIALIZED)) return; if (debug_level >= DEBUG_LEVEL_INFO) @@ -1402,7 +1405,7 @@ static void shutdown(MGSLPC_INFO * info) /* TODO:disable interrupts instead of reset to preserve signal states */ reset_device(info); - if (!info->tty || info->tty->termios->c_cflag & HUPCL) { + if (!tty || tty->termios->c_cflag & HUPCL) { info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS); set_signals(info); } @@ -1411,13 +1414,13 @@ static void shutdown(MGSLPC_INFO * info) release_resources(info); - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); + if (tty) + set_bit(TTY_IO_ERROR, &tty->flags); - info->flags &= ~ASYNC_INITIALIZED; + info->port.flags &= ~ASYNC_INITIALIZED; } -static void mgslpc_program_hw(MGSLPC_INFO *info) +static void mgslpc_program_hw(MGSLPC_INFO *info, struct tty_struct *tty) { unsigned long flags; @@ -1443,7 +1446,7 @@ static void mgslpc_program_hw(MGSLPC_INFO *info) port_irq_enable(info, (unsigned char) PVR_DSR | PVR_RI); get_signals(info); - if (info->netcount || info->tty->termios->c_cflag & CREAD) + if (info->netcount || (tty && (tty->termios->c_cflag & CREAD))) rx_start(info); spin_unlock_irqrestore(&info->lock,flags); @@ -1451,19 +1454,19 @@ static void mgslpc_program_hw(MGSLPC_INFO *info) /* Reconfigure adapter based on new parameters */ -static void mgslpc_change_params(MGSLPC_INFO *info) +static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty) { unsigned cflag; int bits_per_char; - if (!info->tty || !info->tty->termios) + if (!tty || !tty->termios) return; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_change_params(%s)\n", __FILE__,__LINE__, info->device_name ); - cflag = info->tty->termios->c_cflag; + cflag = tty->termios->c_cflag; /* if B0 rate (hangup) specified then negate DTR and RTS */ /* otherwise assert DTR and RTS */ @@ -1510,7 +1513,7 @@ static void mgslpc_change_params(MGSLPC_INFO *info) * current data rate. */ if (info->params.data_rate <= 460800) { - info->params.data_rate = tty_get_baud_rate(info->tty); + info->params.data_rate = tty_get_baud_rate(tty); } if ( info->params.data_rate ) { @@ -1520,24 +1523,24 @@ static void mgslpc_change_params(MGSLPC_INFO *info) info->timeout += HZ/50; /* Add .02 seconds of slop */ if (cflag & CRTSCTS) - info->flags |= ASYNC_CTS_FLOW; + info->port.flags |= ASYNC_CTS_FLOW; else - info->flags &= ~ASYNC_CTS_FLOW; + info->port.flags &= ~ASYNC_CTS_FLOW; if (cflag & CLOCAL) - info->flags &= ~ASYNC_CHECK_CD; + info->port.flags &= ~ASYNC_CHECK_CD; else - info->flags |= ASYNC_CHECK_CD; + info->port.flags |= ASYNC_CHECK_CD; /* process tty input control flags */ info->read_status_mask = 0; - if (I_INPCK(info->tty)) + if (I_INPCK(tty)) info->read_status_mask |= BIT7 | BIT6; - if (I_IGNPAR(info->tty)) + if (I_IGNPAR(tty)) info->ignore_status_mask |= BIT7 | BIT6; - mgslpc_program_hw(info); + mgslpc_program_hw(info, tty); } /* Add a character to the transmit buffer @@ -1597,7 +1600,7 @@ static void mgslpc_flush_chars(struct tty_struct *tty) spin_lock_irqsave(&info->lock,flags); if (!info->tx_active) - tx_start(info); + tx_start(info, tty); spin_unlock_irqrestore(&info->lock,flags); } @@ -1659,7 +1662,7 @@ start: if (info->tx_count && !tty->stopped && !tty->hw_stopped) { spin_lock_irqsave(&info->lock,flags); if (!info->tx_active) - tx_start(info); + tx_start(info, tty); spin_unlock_irqrestore(&info->lock,flags); } cleanup: @@ -1764,7 +1767,7 @@ static void mgslpc_send_xchar(struct tty_struct *tty, char ch) if (ch) { spin_lock_irqsave(&info->lock,flags); if (!info->tx_enabled) - tx_start(info); + tx_start(info, tty); spin_unlock_irqrestore(&info->lock,flags); } } @@ -1862,7 +1865,7 @@ static int get_params(MGSLPC_INFO * info, MGSL_PARAMS __user *user_params) * * Returns: 0 if success, otherwise error code */ -static int set_params(MGSLPC_INFO * info, MGSL_PARAMS __user *new_params) +static int set_params(MGSLPC_INFO * info, MGSL_PARAMS __user *new_params, struct tty_struct *tty) { unsigned long flags; MGSL_PARAMS tmp_params; @@ -1883,7 +1886,7 @@ static int set_params(MGSLPC_INFO * info, MGSL_PARAMS __user *new_params) memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS)); spin_unlock_irqrestore(&info->lock,flags); - mgslpc_change_params(info); + mgslpc_change_params(info, tty); return 0; } @@ -1944,7 +1947,7 @@ static int set_interface(MGSLPC_INFO * info, int if_mode) return 0; } -static int set_txenable(MGSLPC_INFO * info, int enable) +static int set_txenable(MGSLPC_INFO * info, int enable, struct tty_struct *tty) { unsigned long flags; @@ -1954,7 +1957,7 @@ static int set_txenable(MGSLPC_INFO * info, int enable) spin_lock_irqsave(&info->lock,flags); if (enable) { if (!info->tx_enabled) - tx_start(info); + tx_start(info, tty); } else { if (info->tx_enabled) tx_stop(info); @@ -2263,6 +2266,11 @@ static int mgslpc_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg) { MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data; + int error; + struct mgsl_icount cnow; /* kernel counter temps */ + struct serial_icounter_struct __user *p_cuser; /* user space */ + void __user *argp = (void __user *)arg; + unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_ioctl %s cmd=%08X\n", __FILE__,__LINE__, @@ -2277,22 +2285,11 @@ static int mgslpc_ioctl(struct tty_struct *tty, struct file * file, return -EIO; } - return ioctl_common(info, cmd, arg); -} - -static int ioctl_common(MGSLPC_INFO *info, unsigned int cmd, unsigned long arg) -{ - int error; - struct mgsl_icount cnow; /* kernel counter temps */ - struct serial_icounter_struct __user *p_cuser; /* user space */ - void __user *argp = (void __user *)arg; - unsigned long flags; - switch (cmd) { case MGSL_IOCGPARAMS: return get_params(info, argp); case MGSL_IOCSPARAMS: - return set_params(info, argp); + return set_params(info, argp, tty); case MGSL_IOCGTXIDLE: return get_txidle(info, argp); case MGSL_IOCSTXIDLE: @@ -2302,7 +2299,7 @@ static int ioctl_common(MGSLPC_INFO *info, unsigned int cmd, unsigned long arg) case MGSL_IOCSIF: return set_interface(info,(int)arg); case MGSL_IOCTXENABLE: - return set_txenable(info,(int)arg); + return set_txenable(info,(int)arg, tty); case MGSL_IOCRXENABLE: return set_rxenable(info,(int)arg); case MGSL_IOCTXABORT: @@ -2369,7 +2366,7 @@ static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_term == RELEVANT_IFLAG(old_termios->c_iflag))) return; - mgslpc_change_params(info); + mgslpc_change_params(info, tty); /* Handle transition to B0 status */ if (old_termios->c_cflag & CBAUD && @@ -2404,81 +2401,34 @@ static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_term static void mgslpc_close(struct tty_struct *tty, struct file * filp) { MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data; + struct tty_port *port = &info->port; if (mgslpc_paranoia_check(info, tty->name, "mgslpc_close")) return; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_close(%s) entry, count=%d\n", - __FILE__,__LINE__, info->device_name, info->count); - - if (!info->count) - return; + __FILE__,__LINE__, info->device_name, port->count); - if (tty_hung_up_p(filp)) - goto cleanup; - - if ((tty->count == 1) && (info->count != 1)) { - /* - * tty->count is 1 and the tty structure will be freed. - * info->count should be one in this case. - * if it's not, correct it so that the port is shutdown. - */ - printk("mgslpc_close: bad refcount; tty->count is 1, " - "info->count is %d\n", info->count); - info->count = 1; - } + WARN_ON(!port->count); - info->count--; - - /* if at least one open remaining, leave hardware active */ - if (info->count) + if (tty_port_close_start(port, tty, filp) == 0) goto cleanup; - info->flags |= ASYNC_CLOSING; - - /* set tty->closing to notify line discipline to - * only process XON/XOFF characters. Only the N_TTY - * discipline appears to use this (ppp does not). - */ - tty->closing = 1; - - /* wait for transmit data to clear all layers */ - - if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) { - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgslpc_close(%s) calling tty_wait_until_sent\n", - __FILE__,__LINE__, info->device_name ); - tty_wait_until_sent(tty, info->closing_wait); - } - - if (info->flags & ASYNC_INITIALIZED) + if (port->flags & ASYNC_INITIALIZED) mgslpc_wait_until_sent(tty, info->timeout); mgslpc_flush_buffer(tty); tty_ldisc_flush(tty); - - shutdown(info); - - tty->closing = 0; - info->tty = NULL; - - if (info->blocked_open) { - if (info->close_delay) { - msleep_interruptible(jiffies_to_msecs(info->close_delay)); - } - wake_up_interruptible(&info->open_wait); - } - - info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - - wake_up_interruptible(&info->close_wait); - + shutdown(info, tty); + + tty_port_close_end(port, tty); + tty_port_tty_set(port, NULL); cleanup: if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_close(%s) exit, count=%d\n", __FILE__,__LINE__, - tty->driver->name, info->count); + tty->driver->name, port->count); } /* Wait until the transmitter is empty. @@ -2498,7 +2448,7 @@ static void mgslpc_wait_until_sent(struct tty_struct *tty, int timeout) if (mgslpc_paranoia_check(info, tty->name, "mgslpc_wait_until_sent")) return; - if (!(info->flags & ASYNC_INITIALIZED)) + if (!(info->port.flags & ASYNC_INITIALIZED)) goto exit; orig_jiffies = jiffies; @@ -2559,120 +2509,40 @@ static void mgslpc_hangup(struct tty_struct *tty) return; mgslpc_flush_buffer(tty); - shutdown(info); - - info->count = 0; - info->flags &= ~ASYNC_NORMAL_ACTIVE; - info->tty = NULL; - - wake_up_interruptible(&info->open_wait); + shutdown(info, tty); + tty_port_hangup(&info->port); } -/* Block the current process until the specified port - * is ready to be opened. - */ -static int block_til_ready(struct tty_struct *tty, struct file *filp, - MGSLPC_INFO *info) +static int carrier_raised(struct tty_port *port) { - DECLARE_WAITQUEUE(wait, current); - int retval; - bool do_clocal = false; - bool extra_count = false; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):block_til_ready on %s\n", - __FILE__,__LINE__, tty->driver->name ); - - if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){ - /* nonblock mode is set or port is not enabled */ - /* just verify that callout device is not active */ - info->flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - if (tty->termios->c_cflag & CLOCAL) - do_clocal = true; - - /* Wait for carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, info->count is dropped by one, so that - * mgslpc_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - - retval = 0; - add_wait_queue(&info->open_wait, &wait); - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):block_til_ready before block on %s count=%d\n", - __FILE__,__LINE__, tty->driver->name, info->count ); - - spin_lock_irqsave(&info->lock, flags); - if (!tty_hung_up_p(filp)) { - extra_count = true; - info->count--; - } - spin_unlock_irqrestore(&info->lock, flags); - info->blocked_open++; - - while (1) { - if ((tty->termios->c_cflag & CBAUD)) { - spin_lock_irqsave(&info->lock,flags); - info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - } - - set_current_state(TASK_INTERRUPTIBLE); - - if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)){ - retval = (info->flags & ASYNC_HUP_NOTIFY) ? - -EAGAIN : -ERESTARTSYS; - break; - } - - spin_lock_irqsave(&info->lock,flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - - if (!(info->flags & ASYNC_CLOSING) && - (do_clocal || (info->serial_signals & SerialSignal_DCD)) ) { - break; - } - - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):block_til_ready blocking on %s count=%d\n", - __FILE__,__LINE__, tty->driver->name, info->count ); - - schedule(); - } - - set_current_state(TASK_RUNNING); - remove_wait_queue(&info->open_wait, &wait); + MGSLPC_INFO *info = container_of(port, MGSLPC_INFO, port); + unsigned long flags; - if (extra_count) - info->count++; - info->blocked_open--; + spin_lock_irqsave(&info->lock,flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock,flags); - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):block_til_ready after blocking on %s count=%d\n", - __FILE__,__LINE__, tty->driver->name, info->count ); + if (info->serial_signals & SerialSignal_DCD) + return 1; + return 0; +} - if (!retval) - info->flags |= ASYNC_NORMAL_ACTIVE; +static void raise_dtr_rts(struct tty_port *port) +{ + MGSLPC_INFO *info = container_of(port, MGSLPC_INFO, port); + unsigned long flags; - return retval; + spin_lock_irqsave(&info->lock,flags); + info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); } + static int mgslpc_open(struct tty_struct *tty, struct file * filp) { MGSLPC_INFO *info; + struct tty_port *port; int retval, line; unsigned long flags; @@ -2691,23 +2561,24 @@ static int mgslpc_open(struct tty_struct *tty, struct file * filp) if (mgslpc_paranoia_check(info, tty->name, "mgslpc_open")) return -ENODEV; + port = &info->port; tty->driver_data = info; - info->tty = tty; + tty_port_tty_set(port, tty); if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_open(%s), old ref count = %d\n", - __FILE__,__LINE__,tty->driver->name, info->count); + __FILE__,__LINE__,tty->driver->name, port->count); /* If port is closing, signal caller to try again */ - if (tty_hung_up_p(filp) || info->flags & ASYNC_CLOSING){ - if (info->flags & ASYNC_CLOSING) - interruptible_sleep_on(&info->close_wait); - retval = ((info->flags & ASYNC_HUP_NOTIFY) ? + if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING){ + if (port->flags & ASYNC_CLOSING) + interruptible_sleep_on(&port->close_wait); + retval = ((port->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS); goto cleanup; } - info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0; spin_lock_irqsave(&info->netlock, flags); if (info->netcount) { @@ -2715,17 +2586,19 @@ static int mgslpc_open(struct tty_struct *tty, struct file * filp) spin_unlock_irqrestore(&info->netlock, flags); goto cleanup; } - info->count++; + spin_lock(&port->lock); + port->count++; + spin_unlock(&port->lock); spin_unlock_irqrestore(&info->netlock, flags); - if (info->count == 1) { + if (port->count == 1) { /* 1st open on this device, init hardware */ - retval = startup(info); + retval = startup(info, tty); if (retval < 0) goto cleanup; } - retval = block_til_ready(tty, filp, info); + retval = tty_port_block_til_ready(&info->port, tty, filp); if (retval) { if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):block_til_ready(%s) returned %d\n", @@ -2739,13 +2612,6 @@ static int mgslpc_open(struct tty_struct *tty, struct file * filp) retval = 0; cleanup: - if (retval) { - if (tty->count == 1) - info->tty = NULL; /* tty layer will release tty struct */ - if(info->count) - info->count--; - } - return retval; } @@ -3500,7 +3366,7 @@ static void rx_start(MGSLPC_INFO *info) info->rx_enabled = true; } -static void tx_start(MGSLPC_INFO *info) +static void tx_start(MGSLPC_INFO *info, struct tty_struct *tty) { if (debug_level >= DEBUG_LEVEL_ISR) printk("%s(%d):tx_start(%s)\n", @@ -3524,11 +3390,11 @@ static void tx_start(MGSLPC_INFO *info) if (info->params.mode == MGSL_MODE_ASYNC) { if (!info->tx_active) { info->tx_active = true; - tx_ready(info); + tx_ready(info, tty); } } else { info->tx_active = true; - tx_ready(info); + tx_ready(info, tty); mod_timer(&info->tx_timer, jiffies + msecs_to_jiffies(5000)); } @@ -3849,13 +3715,12 @@ static void rx_reset_buffers(MGSLPC_INFO *info) * * Returns true if frame returned, otherwise false */ -static bool rx_get_frame(MGSLPC_INFO *info) +static bool rx_get_frame(MGSLPC_INFO *info, struct tty_struct *tty) { unsigned short status; RXBUF *buf; unsigned int framesize = 0; unsigned long flags; - struct tty_struct *tty = info->tty; bool return_frame = false; if (info->rx_frame_count == 0) @@ -4075,7 +3940,11 @@ static void tx_timeout(unsigned long context) hdlcdev_tx_done(info); else #endif - bh_transmit(info); + { + struct tty_struct *tty = tty_port_tty_get(&info->port); + bh_transmit(info, tty); + tty_kref_put(tty); + } } #if SYNCLINK_GENERIC_HDLC @@ -4094,11 +3963,12 @@ static int hdlcdev_attach(struct net_device *dev, unsigned short encoding, unsigned short parity) { MGSLPC_INFO *info = dev_to_port(dev); + struct tty_struct *tty; unsigned char new_encoding; unsigned short new_crctype; /* return error if TTY interface open */ - if (info->count) + if (info->port.count) return -EBUSY; switch (encoding) @@ -4123,8 +3993,11 @@ static int hdlcdev_attach(struct net_device *dev, unsigned short encoding, info->params.crc_type = new_crctype; /* if network interface up, reprogram hardware */ - if (info->netcount) - mgslpc_program_hw(info); + if (info->netcount) { + tty = tty_port_tty_get(&info->port); + mgslpc_program_hw(info, tty); + tty_kref_put(tty); + } return 0; } @@ -4165,8 +4038,11 @@ static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev) /* start hardware transmitter if necessary */ spin_lock_irqsave(&info->lock,flags); - if (!info->tx_active) - tx_start(info); + if (!info->tx_active) { + struct tty_struct *tty = tty_port_tty_get(&info->port); + tx_start(info, tty); + tty_kref_put(tty); + } spin_unlock_irqrestore(&info->lock,flags); return 0; @@ -4183,6 +4059,7 @@ static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev) static int hdlcdev_open(struct net_device *dev) { MGSLPC_INFO *info = dev_to_port(dev); + struct tty_struct *tty; int rc; unsigned long flags; @@ -4195,7 +4072,7 @@ static int hdlcdev_open(struct net_device *dev) /* arbitrate between network and tty opens */ spin_lock_irqsave(&info->netlock, flags); - if (info->count != 0 || info->netcount != 0) { + if (info->port.count != 0 || info->netcount != 0) { printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name); spin_unlock_irqrestore(&info->netlock, flags); return -EBUSY; @@ -4203,17 +4080,19 @@ static int hdlcdev_open(struct net_device *dev) info->netcount=1; spin_unlock_irqrestore(&info->netlock, flags); + tty = tty_port_tty_get(&info->port); /* claim resources and init adapter */ - if ((rc = startup(info)) != 0) { + if ((rc = startup(info, tty)) != 0) { + tty_kref_put(tty); spin_lock_irqsave(&info->netlock, flags); info->netcount=0; spin_unlock_irqrestore(&info->netlock, flags); return rc; } - /* assert DTR and RTS, apply hardware settings */ info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; - mgslpc_program_hw(info); + mgslpc_program_hw(info, tty); + tty_kref_put(tty); /* enable network layer transmit */ dev->trans_start = jiffies; @@ -4241,6 +4120,7 @@ static int hdlcdev_open(struct net_device *dev) static int hdlcdev_close(struct net_device *dev) { MGSLPC_INFO *info = dev_to_port(dev); + struct tty_struct *tty = tty_port_tty_get(&info->port); unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -4249,8 +4129,8 @@ static int hdlcdev_close(struct net_device *dev) netif_stop_queue(dev); /* shutdown adapter and release resources */ - shutdown(info); - + shutdown(info, tty); + tty_kref_put(tty); hdlc_close(dev); spin_lock_irqsave(&info->netlock, flags); @@ -4281,7 +4161,7 @@ static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name); /* return error if TTY interface open */ - if (info->count) + if (info->port.count) return -EBUSY; if (cmd != SIOCWANDEV) @@ -4354,8 +4234,11 @@ static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) info->params.clock_speed = 0; /* if network interface up, reprogram hardware */ - if (info->netcount) - mgslpc_program_hw(info); + if (info->netcount) { + struct tty_struct *tty = tty_port_tty_get(&info->port); + mgslpc_program_hw(info, tty); + tty_kref_put(tty); + } return 0; default: diff --git a/drivers/char/pty.c b/drivers/char/pty.c index 6d4582712b1..146c97613da 100644 --- a/drivers/char/pty.c +++ b/drivers/char/pty.c @@ -5,8 +5,6 @@ * * Added support for a Unix98-style ptmx device. * -- C. Scott Ananian <cananian@alumni.princeton.edu>, 14-Jan-1998 - * Added TTY_DO_WRITE_WAKEUP to enable n_tty to send POLL_OUT to - * waiting writers -- Sapan Bhatia <sapan@corewars.org> * * When reading this code see also fs/devpts. In particular note that the * driver_data field is used by the devpts side as a binding to the devpts @@ -34,7 +32,7 @@ /* These are global because they are accessed in tty_io.c */ #ifdef CONFIG_UNIX98_PTYS -struct tty_driver *ptm_driver; +static struct tty_driver *ptm_driver; static struct tty_driver *pts_driver; #endif @@ -217,7 +215,6 @@ static int pty_open(struct tty_struct *tty, struct file *filp) clear_bit(TTY_OTHER_CLOSED, &tty->link->flags); set_bit(TTY_THROTTLED, &tty->flags); - set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); retval = 0; out: return retval; @@ -230,6 +227,55 @@ static void pty_set_termios(struct tty_struct *tty, tty->termios->c_cflag |= (CS8 | CREAD); } +/** + * pty_do_resize - resize event + * @tty: tty being resized + * @real_tty: real tty (not the same as tty if using a pty/tty pair) + * @rows: rows (character) + * @cols: cols (character) + * + * Update the termios variables and send the neccessary signals to + * peform a terminal resize correctly + */ + +int pty_resize(struct tty_struct *tty, struct winsize *ws) +{ + struct pid *pgrp, *rpgrp; + unsigned long flags; + struct tty_struct *pty = tty->link; + + /* For a PTY we need to lock the tty side */ + mutex_lock(&tty->termios_mutex); + if (!memcmp(ws, &tty->winsize, sizeof(*ws))) + goto done; + + /* Get the PID values and reference them so we can + avoid holding the tty ctrl lock while sending signals. + We need to lock these individually however. */ + + spin_lock_irqsave(&tty->ctrl_lock, flags); + pgrp = get_pid(tty->pgrp); + spin_unlock_irqrestore(&tty->ctrl_lock, flags); + + spin_lock_irqsave(&pty->ctrl_lock, flags); + rpgrp = get_pid(pty->pgrp); + spin_unlock_irqrestore(&pty->ctrl_lock, flags); + + if (pgrp) + kill_pgrp(pgrp, SIGWINCH, 1); + if (rpgrp != pgrp && rpgrp) + kill_pgrp(rpgrp, SIGWINCH, 1); + + put_pid(pgrp); + put_pid(rpgrp); + + tty->winsize = *ws; + pty->winsize = *ws; /* Never used so will go away soon */ +done: + mutex_unlock(&tty->termios_mutex); + return 0; +} + static int pty_install(struct tty_driver *driver, struct tty_struct *tty) { struct tty_struct *o_tty; @@ -290,6 +336,7 @@ static const struct tty_operations pty_ops = { .chars_in_buffer = pty_chars_in_buffer, .unthrottle = pty_unthrottle, .set_termios = pty_set_termios, + .resize = pty_resize }; /* Traditional BSD devices */ @@ -319,6 +366,7 @@ static const struct tty_operations pty_ops_bsd = { .unthrottle = pty_unthrottle, .set_termios = pty_set_termios, .ioctl = pty_bsd_ioctl, + .resize = pty_resize }; static void __init legacy_pty_init(void) @@ -561,7 +609,8 @@ static const struct tty_operations ptm_unix98_ops = { .unthrottle = pty_unthrottle, .set_termios = pty_set_termios, .ioctl = pty_unix98_ioctl, - .shutdown = pty_unix98_shutdown + .shutdown = pty_unix98_shutdown, + .resize = pty_resize }; static const struct tty_operations pty_unix98_ops = { diff --git a/drivers/char/random.c b/drivers/char/random.c index 675076f5fca..7c13581ca9c 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -407,7 +407,7 @@ struct entropy_store { /* read-write data: */ spinlock_t lock; unsigned add_ptr; - int entropy_count; /* Must at no time exceed ->POOLBITS! */ + int entropy_count; int input_rotate; }; @@ -558,24 +558,43 @@ struct timer_rand_state { unsigned dont_count_entropy:1; }; +#ifndef CONFIG_SPARSE_IRQ + static struct timer_rand_state *irq_timer_state[NR_IRQS]; static struct timer_rand_state *get_timer_rand_state(unsigned int irq) { - if (irq >= nr_irqs) - return NULL; - return irq_timer_state[irq]; } -static void set_timer_rand_state(unsigned int irq, struct timer_rand_state *state) +static void set_timer_rand_state(unsigned int irq, + struct timer_rand_state *state) { - if (irq >= nr_irqs) - return; - irq_timer_state[irq] = state; } +#else + +static struct timer_rand_state *get_timer_rand_state(unsigned int irq) +{ + struct irq_desc *desc; + + desc = irq_to_desc(irq); + + return desc->timer_rand_state; +} + +static void set_timer_rand_state(unsigned int irq, + struct timer_rand_state *state) +{ + struct irq_desc *desc; + + desc = irq_to_desc(irq); + + desc->timer_rand_state = state; +} +#endif + static struct timer_rand_state input_timer_state; /* @@ -748,11 +767,10 @@ static size_t account(struct entropy_store *r, size_t nbytes, int min, { unsigned long flags; - BUG_ON(r->entropy_count > r->poolinfo->POOLBITS); - /* Hold lock while accounting */ spin_lock_irqsave(&r->lock, flags); + BUG_ON(r->entropy_count > r->poolinfo->POOLBITS); DEBUG_ENT("trying to extract %d bits from %s\n", nbytes * 8, r->name); @@ -933,9 +951,6 @@ void rand_initialize_irq(int irq) { struct timer_rand_state *state; - if (irq >= nr_irqs) - return; - state = get_timer_rand_state(irq); if (state) diff --git a/drivers/char/rio/rio_linux.c b/drivers/char/rio/rio_linux.c index a8f68a3f14d..2e8a6eed34b 100644 --- a/drivers/char/rio/rio_linux.c +++ b/drivers/char/rio/rio_linux.c @@ -173,7 +173,7 @@ static void rio_disable_tx_interrupts(void *ptr); static void rio_enable_tx_interrupts(void *ptr); static void rio_disable_rx_interrupts(void *ptr); static void rio_enable_rx_interrupts(void *ptr); -static int rio_get_CD(void *ptr); +static int rio_carrier_raised(struct tty_port *port); static void rio_shutdown_port(void *ptr); static int rio_set_real_termios(void *ptr); static void rio_hungup(void *ptr); @@ -224,7 +224,6 @@ static struct real_driver rio_real_driver = { rio_enable_tx_interrupts, rio_disable_rx_interrupts, rio_enable_rx_interrupts, - rio_get_CD, rio_shutdown_port, rio_set_real_termios, rio_chars_in_buffer, @@ -476,9 +475,9 @@ static void rio_enable_rx_interrupts(void *ptr) /* Jeez. Isn't this simple? */ -static int rio_get_CD(void *ptr) +static int rio_carrier_raised(struct tty_port *port) { - struct Port *PortP = ptr; + struct Port *PortP = container_of(port, struct Port, gs.port); int rv; func_enter(); @@ -797,16 +796,9 @@ static int rio_init_drivers(void) return 1; } - -static void *ckmalloc(int size) -{ - void *p; - - p = kzalloc(size, GFP_KERNEL); - return p; -} - - +static const struct tty_port_operations rio_port_ops = { + .carrier_raised = rio_carrier_raised, +}; static int rio_init_datastructures(void) { @@ -826,33 +818,30 @@ static int rio_init_datastructures(void) #define TMIO_SZ sizeof(struct termios *) rio_dprintk(RIO_DEBUG_INIT, "getting : %Zd %Zd %Zd %Zd %Zd bytes\n", RI_SZ, RIO_HOSTS * HOST_SZ, RIO_PORTS * PORT_SZ, RIO_PORTS * TMIO_SZ, RIO_PORTS * TMIO_SZ); - if (!(p = ckmalloc(RI_SZ))) + if (!(p = kzalloc(RI_SZ, GFP_KERNEL))) goto free0; - if (!(p->RIOHosts = ckmalloc(RIO_HOSTS * HOST_SZ))) + if (!(p->RIOHosts = kzalloc(RIO_HOSTS * HOST_SZ, GFP_KERNEL))) goto free1; - if (!(p->RIOPortp = ckmalloc(RIO_PORTS * PORT_SZ))) + if (!(p->RIOPortp = kzalloc(RIO_PORTS * PORT_SZ, GFP_KERNEL))) goto free2; p->RIOConf = RIOConf; rio_dprintk(RIO_DEBUG_INIT, "Got : %p %p %p\n", p, p->RIOHosts, p->RIOPortp); #if 1 for (i = 0; i < RIO_PORTS; i++) { - port = p->RIOPortp[i] = ckmalloc(sizeof(struct Port)); + port = p->RIOPortp[i] = kzalloc(sizeof(struct Port), GFP_KERNEL); if (!port) { goto free6; } rio_dprintk(RIO_DEBUG_INIT, "initing port %d (%d)\n", i, port->Mapped); + tty_port_init(&port->gs.port); + port->gs.port.ops = &rio_port_ops; port->PortNum = i; port->gs.magic = RIO_MAGIC; port->gs.close_delay = HZ / 2; port->gs.closing_wait = 30 * HZ; port->gs.rd = &rio_real_driver; spin_lock_init(&port->portSem); - /* - * Initializing wait queue - */ - init_waitqueue_head(&port->gs.port.open_wait); - init_waitqueue_head(&port->gs.port.close_wait); } #else /* We could postpone initializing them to when they are configured. */ diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c index 2c6c8f33d6b..9af8d74875b 100644 --- a/drivers/char/riscom8.c +++ b/drivers/char/riscom8.c @@ -857,98 +857,21 @@ static void rc_shutdown_port(struct tty_struct *tty, rc_shutdown_board(bp); } -static int block_til_ready(struct tty_struct *tty, struct file *filp, - struct riscom_port *port) +static int carrier_raised(struct tty_port *port) { - DECLARE_WAITQUEUE(wait, current); - struct riscom_board *bp = port_Board(port); - int retval; - int do_clocal = 0; - int CD; + struct riscom_port *p = container_of(port, struct riscom_port, port); + struct riscom_board *bp = port_Board(p); unsigned long flags; - - /* - * If the device is in the middle of being closed, then block - * until it's done, and then try again. - */ - if (tty_hung_up_p(filp) || port->port.flags & ASYNC_CLOSING) { - interruptible_sleep_on(&port->port.close_wait); - if (port->port.flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - else - return -ERESTARTSYS; - } - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || - (tty->flags & (1 << TTY_IO_ERROR))) { - port->port.flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - if (C_CLOCAL(tty)) - do_clocal = 1; - - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, info->count is dropped by one, so that - * rs_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&port->port.open_wait, &wait); - + int CD; + spin_lock_irqsave(&riscom_lock, flags); - - if (!tty_hung_up_p(filp)) - port->port.count--; - + rc_out(bp, CD180_CAR, port_No(p)); + CD = rc_in(bp, CD180_MSVR) & MSVR_CD; + rc_out(bp, CD180_MSVR, MSVR_RTS); + bp->DTR &= ~(1u << port_No(p)); + rc_out(bp, RC_DTR, bp->DTR); spin_unlock_irqrestore(&riscom_lock, flags); - - port->port.blocked_open++; - while (1) { - spin_lock_irqsave(&riscom_lock, flags); - - rc_out(bp, CD180_CAR, port_No(port)); - CD = rc_in(bp, CD180_MSVR) & MSVR_CD; - rc_out(bp, CD180_MSVR, MSVR_RTS); - bp->DTR &= ~(1u << port_No(port)); - rc_out(bp, RC_DTR, bp->DTR); - - spin_unlock_irqrestore(&riscom_lock, flags); - - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || - !(port->port.flags & ASYNC_INITIALIZED)) { - if (port->port.flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; - break; - } - if (!(port->port.flags & ASYNC_CLOSING) && - (do_clocal || CD)) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - schedule(); - } - __set_current_state(TASK_RUNNING); - remove_wait_queue(&port->port.open_wait, &wait); - if (!tty_hung_up_p(filp)) - port->port.count++; - port->port.blocked_open--; - if (retval) - return retval; - - port->port.flags |= ASYNC_NORMAL_ACTIVE; - return 0; + return CD; } static int rc_open(struct tty_struct *tty, struct file *filp) @@ -977,13 +900,13 @@ static int rc_open(struct tty_struct *tty, struct file *filp) error = rc_setup_port(bp, port); if (error == 0) - error = block_til_ready(tty, filp, port); + error = tty_port_block_til_ready(&port->port, tty, filp); return error; } static void rc_flush_buffer(struct tty_struct *tty) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; unsigned long flags; if (rc_paranoia_check(port, tty->name, "rc_flush_buffer")) @@ -998,7 +921,7 @@ static void rc_flush_buffer(struct tty_struct *tty) static void rc_close(struct tty_struct *tty, struct file *filp) { - struct riscom_port *port = (struct riscom_port *) tty->driver_data; + struct riscom_port *port = tty->driver_data; struct riscom_board *bp; unsigned long flags; unsigned long timeout; @@ -1006,40 +929,19 @@ static void rc_close(struct tty_struct *tty, struct file *filp) if (!port || rc_paranoia_check(port, tty->name, "close")) return; - spin_lock_irqsave(&riscom_lock, flags); - - if (tty_hung_up_p(filp)) - goto out; - bp = port_Board(port); - if ((tty->count == 1) && (port->port.count != 1)) { - printk(KERN_INFO "rc%d: rc_close: bad port count;" - " tty->count is 1, port count is %d\n", - board_No(bp), port->port.count); - port->port.count = 1; - } - if (--port->port.count < 0) { - printk(KERN_INFO "rc%d: rc_close: bad port count " - "for tty%d: %d\n", - board_No(bp), port_No(port), port->port.count); - port->port.count = 0; - } - if (port->port.count) - goto out; - port->port.flags |= ASYNC_CLOSING; - /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - if (port->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, port->port.closing_wait); + + if (tty_port_close_start(&port->port, tty, filp) == 0) + return; + /* * At this point we stop accepting input. To do this, we * disable the receive line status interrupts, and tell the * interrupt driver to stop checking the data ready bit in the * line status register. */ + + spin_lock_irqsave(&riscom_lock, flags); port->IER &= ~IER_RXD; if (port->port.flags & ASYNC_INITIALIZED) { port->IER &= ~IER_TXRDY; @@ -1053,33 +955,24 @@ static void rc_close(struct tty_struct *tty, struct file *filp) */ timeout = jiffies + HZ; while (port->IER & IER_TXEMPTY) { + spin_unlock_irqrestore(&riscom_lock, flags); msleep_interruptible(jiffies_to_msecs(port->timeout)); + spin_lock_irqsave(&riscom_lock, flags); if (time_after(jiffies, timeout)) break; } } rc_shutdown_port(tty, bp, port); rc_flush_buffer(tty); - tty_ldisc_flush(tty); - - tty->closing = 0; - port->port.tty = NULL; - if (port->port.blocked_open) { - if (port->port.close_delay) - msleep_interruptible(jiffies_to_msecs(port->port.close_delay)); - wake_up_interruptible(&port->port.open_wait); - } - port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&port->port.close_wait); - -out: spin_unlock_irqrestore(&riscom_lock, flags); + + tty_port_close_end(&port->port, tty); } static int rc_write(struct tty_struct *tty, const unsigned char *buf, int count) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; struct riscom_board *bp; int c, total = 0; unsigned long flags; @@ -1122,7 +1015,7 @@ static int rc_write(struct tty_struct *tty, static int rc_put_char(struct tty_struct *tty, unsigned char ch) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; unsigned long flags; int ret = 0; @@ -1146,7 +1039,7 @@ out: static void rc_flush_chars(struct tty_struct *tty) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; unsigned long flags; if (rc_paranoia_check(port, tty->name, "rc_flush_chars")) @@ -1166,7 +1059,7 @@ static void rc_flush_chars(struct tty_struct *tty) static int rc_write_room(struct tty_struct *tty) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; int ret; if (rc_paranoia_check(port, tty->name, "rc_write_room")) @@ -1180,7 +1073,7 @@ static int rc_write_room(struct tty_struct *tty) static int rc_chars_in_buffer(struct tty_struct *tty) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; if (rc_paranoia_check(port, tty->name, "rc_chars_in_buffer")) return 0; @@ -1190,7 +1083,7 @@ static int rc_chars_in_buffer(struct tty_struct *tty) static int rc_tiocmget(struct tty_struct *tty, struct file *file) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; struct riscom_board *bp; unsigned char status; unsigned int result; @@ -1220,7 +1113,7 @@ static int rc_tiocmget(struct tty_struct *tty, struct file *file) static int rc_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; unsigned long flags; struct riscom_board *bp; @@ -1252,7 +1145,7 @@ static int rc_tiocmset(struct tty_struct *tty, struct file *file, static int rc_send_break(struct tty_struct *tty, int length) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; struct riscom_board *bp = port_Board(port); unsigned long flags; @@ -1345,7 +1238,7 @@ static int rc_get_serial_info(struct riscom_port *port, static int rc_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, unsigned long arg) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; void __user *argp = (void __user *)arg; int retval; @@ -1371,7 +1264,7 @@ static int rc_ioctl(struct tty_struct *tty, struct file *filp, static void rc_throttle(struct tty_struct *tty) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; struct riscom_board *bp; unsigned long flags; @@ -1393,7 +1286,7 @@ static void rc_throttle(struct tty_struct *tty) static void rc_unthrottle(struct tty_struct *tty) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; struct riscom_board *bp; unsigned long flags; @@ -1415,7 +1308,7 @@ static void rc_unthrottle(struct tty_struct *tty) static void rc_stop(struct tty_struct *tty) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; struct riscom_board *bp; unsigned long flags; @@ -1433,7 +1326,7 @@ static void rc_stop(struct tty_struct *tty) static void rc_start(struct tty_struct *tty) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; struct riscom_board *bp; unsigned long flags; @@ -1454,8 +1347,9 @@ static void rc_start(struct tty_struct *tty) static void rc_hangup(struct tty_struct *tty) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; struct riscom_board *bp; + unsigned long flags; if (rc_paranoia_check(port, tty->name, "rc_hangup")) return; @@ -1463,16 +1357,18 @@ static void rc_hangup(struct tty_struct *tty) bp = port_Board(port); rc_shutdown_port(tty, bp, port); + spin_lock_irqsave(&port->port.lock, flags); port->port.count = 0; port->port.flags &= ~ASYNC_NORMAL_ACTIVE; port->port.tty = NULL; wake_up_interruptible(&port->port.open_wait); + spin_unlock_irqrestore(&port->port.lock, flags); } static void rc_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; unsigned long flags; if (rc_paranoia_check(port, tty->name, "rc_set_termios")) @@ -1510,6 +1406,11 @@ static const struct tty_operations riscom_ops = { .break_ctl = rc_send_break, }; +static const struct tty_port_operations riscom_port_ops = { + .carrier_raised = carrier_raised, +}; + + static int __init rc_init_drivers(void) { int error; @@ -1541,6 +1442,7 @@ static int __init rc_init_drivers(void) memset(rc_port, 0, sizeof(rc_port)); for (i = 0; i < RC_NPORT * RC_NBOARD; i++) { tty_port_init(&rc_port[i].port); + rc_port[i].port.ops = &riscom_port_ops; rc_port[i].magic = RISCOM8_MAGIC; } return 0; diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c index 584d791e84a..f59fc5cea06 100644 --- a/drivers/char/rocket.c +++ b/drivers/char/rocket.c @@ -135,6 +135,7 @@ static int rcktpt_type[NUM_BOARDS]; static int is_PCI[NUM_BOARDS]; static rocketModel_t rocketModel[NUM_BOARDS]; static int max_board; +static const struct tty_port_operations rocket_port_ops; /* * The following arrays define the interrupt bits corresponding to each AIOP. @@ -435,15 +436,15 @@ static void rp_do_transmit(struct r_port *info) #endif if (!info) return; - if (!info->port.tty) { - printk(KERN_WARNING "rp: WARNING %s called with " - "info->port.tty==NULL\n", __func__); + tty = tty_port_tty_get(&info->port); + + if (tty == NULL) { + printk(KERN_WARNING "rp: WARNING %s called with tty==NULL\n", __func__); clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); return; } spin_lock_irqsave(&info->slock, flags); - tty = info->port.tty; info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp); /* Loop sending data to FIFO until done or FIFO full */ @@ -477,6 +478,7 @@ static void rp_do_transmit(struct r_port *info) } spin_unlock_irqrestore(&info->slock, flags); + tty_kref_put(tty); #ifdef ROCKET_DEBUG_INTR printk(KERN_DEBUG "(%d,%d,%d,%d)...\n", info->xmit_cnt, info->xmit_head, @@ -498,18 +500,18 @@ static void rp_handle_port(struct r_port *info) if (!info) return; - if ((info->flags & ROCKET_INITIALIZED) == 0) { + if ((info->port.flags & ASYNC_INITIALIZED) == 0) { printk(KERN_WARNING "rp: WARNING: rp_handle_port called with " "info->flags & NOT_INIT\n"); return; } - if (!info->port.tty) { + tty = tty_port_tty_get(&info->port); + if (!tty) { printk(KERN_WARNING "rp: WARNING: rp_handle_port called with " - "info->port.tty==NULL\n"); + "tty==NULL\n"); return; } cp = &info->channel; - tty = info->port.tty; IntMask = sGetChanIntID(cp) & info->intmask; #ifdef ROCKET_DEBUG_INTR @@ -541,6 +543,7 @@ static void rp_handle_port(struct r_port *info) printk(KERN_INFO "DSR change...\n"); } #endif + tty_kref_put(tty); } /* @@ -649,9 +652,8 @@ static void init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev) info->board = board; info->aiop = aiop; info->chan = chan; - info->port.closing_wait = 3000; - info->port.close_delay = 50; - init_waitqueue_head(&info->port.open_wait); + tty_port_init(&info->port); + info->port.ops = &rocket_port_ops; init_completion(&info->close_wait); info->flags &= ~ROCKET_MODE_MASK; switch (pc104[board][line]) { @@ -710,7 +712,7 @@ static void init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev) * Configures a rocketport port according to its termio settings. Called from * user mode into the driver (exception handler). *info CD manipulation is spinlock protected. */ -static void configure_r_port(struct r_port *info, +static void configure_r_port(struct tty_struct *tty, struct r_port *info, struct ktermios *old_termios) { unsigned cflag; @@ -718,7 +720,7 @@ static void configure_r_port(struct r_port *info, unsigned rocketMode; int bits, baud, divisor; CHANNEL_t *cp; - struct ktermios *t = info->port.tty->termios; + struct ktermios *t = tty->termios; cp = &info->channel; cflag = t->c_cflag; @@ -751,7 +753,7 @@ static void configure_r_port(struct r_port *info, } /* baud rate */ - baud = tty_get_baud_rate(info->port.tty); + baud = tty_get_baud_rate(tty); if (!baud) baud = 9600; divisor = ((rp_baud_base[info->board] + (baud >> 1)) / baud) - 1; @@ -769,7 +771,7 @@ static void configure_r_port(struct r_port *info, sSetBaud(cp, divisor); /* FIXME: Should really back compute a baud rate from the divisor */ - tty_encode_baud_rate(info->port.tty, baud, baud); + tty_encode_baud_rate(tty, baud, baud); if (cflag & CRTSCTS) { info->intmask |= DELTA_CTS; @@ -794,15 +796,15 @@ static void configure_r_port(struct r_port *info, * Handle software flow control in the board */ #ifdef ROCKET_SOFT_FLOW - if (I_IXON(info->port.tty)) { + if (I_IXON(tty)) { sEnTxSoftFlowCtl(cp); - if (I_IXANY(info->port.tty)) { + if (I_IXANY(tty)) { sEnIXANY(cp); } else { sDisIXANY(cp); } - sSetTxXONChar(cp, START_CHAR(info->port.tty)); - sSetTxXOFFChar(cp, STOP_CHAR(info->port.tty)); + sSetTxXONChar(cp, START_CHAR(tty)); + sSetTxXOFFChar(cp, STOP_CHAR(tty)); } else { sDisTxSoftFlowCtl(cp); sDisIXANY(cp); @@ -814,24 +816,24 @@ static void configure_r_port(struct r_port *info, * Set up ignore/read mask words */ info->read_status_mask = STMRCVROVRH | 0xFF; - if (I_INPCK(info->port.tty)) + if (I_INPCK(tty)) info->read_status_mask |= STMFRAMEH | STMPARITYH; - if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) + if (I_BRKINT(tty) || I_PARMRK(tty)) info->read_status_mask |= STMBREAKH; /* * Characters to ignore */ info->ignore_status_mask = 0; - if (I_IGNPAR(info->port.tty)) + if (I_IGNPAR(tty)) info->ignore_status_mask |= STMFRAMEH | STMPARITYH; - if (I_IGNBRK(info->port.tty)) { + if (I_IGNBRK(tty)) { info->ignore_status_mask |= STMBREAKH; /* * If we're ignoring parity and break indicators, * ignore overruns too. (For real raw support). */ - if (I_IGNPAR(info->port.tty)) + if (I_IGNPAR(tty)) info->ignore_status_mask |= STMRCVROVRH; } @@ -864,106 +866,17 @@ static void configure_r_port(struct r_port *info, } } -/* info->port.count is considered critical, protected by spinlocks. */ -static int block_til_ready(struct tty_struct *tty, struct file *filp, - struct r_port *info) +static int carrier_raised(struct tty_port *port) { - DECLARE_WAITQUEUE(wait, current); - int retval; - int do_clocal = 0, extra_count = 0; - unsigned long flags; - - /* - * If the device is in the middle of being closed, then block - * until it's done, and then try again. - */ - if (tty_hung_up_p(filp)) - return ((info->flags & ROCKET_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS); - if (info->flags & ROCKET_CLOSING) { - if (wait_for_completion_interruptible(&info->close_wait)) - return -ERESTARTSYS; - return ((info->flags & ROCKET_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS); - } - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) { - info->flags |= ROCKET_NORMAL_ACTIVE; - return 0; - } - if (tty->termios->c_cflag & CLOCAL) - do_clocal = 1; - - /* - * Block waiting for the carrier detect and the line to become free. While we are in - * this loop, info->port.count is dropped by one, so that rp_close() knows when to free things. - * We restore it upon exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&info->port.open_wait, &wait); -#ifdef ROCKET_DEBUG_OPEN - printk(KERN_INFO "block_til_ready before block: ttyR%d, count = %d\n", info->line, info->port.count); -#endif - spin_lock_irqsave(&info->slock, flags); - -#ifdef ROCKET_DISABLE_SIMUSAGE - info->flags |= ROCKET_NORMAL_ACTIVE; -#else - if (!tty_hung_up_p(filp)) { - extra_count = 1; - info->port.count--; - } -#endif - info->port.blocked_open++; - - spin_unlock_irqrestore(&info->slock, flags); - - while (1) { - if (tty->termios->c_cflag & CBAUD) { - sSetDTR(&info->channel); - sSetRTS(&info->channel); - } - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || !(info->flags & ROCKET_INITIALIZED)) { - if (info->flags & ROCKET_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; - break; - } - if (!(info->flags & ROCKET_CLOSING) && (do_clocal || (sGetChanStatusLo(&info->channel) & CD_ACT))) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } -#ifdef ROCKET_DEBUG_OPEN - printk(KERN_INFO "block_til_ready blocking: ttyR%d, count = %d, flags=0x%0x\n", - info->line, info->port.count, info->flags); -#endif - schedule(); /* Don't hold spinlock here, will hang PC */ - } - __set_current_state(TASK_RUNNING); - remove_wait_queue(&info->port.open_wait, &wait); - - spin_lock_irqsave(&info->slock, flags); - - if (extra_count) - info->port.count++; - info->port.blocked_open--; - - spin_unlock_irqrestore(&info->slock, flags); + struct r_port *info = container_of(port, struct r_port, port); + return (sGetChanStatusLo(&info->channel) & CD_ACT) ? 1 : 0; +} -#ifdef ROCKET_DEBUG_OPEN - printk(KERN_INFO "block_til_ready after blocking: ttyR%d, count = %d\n", - info->line, info->port.count); -#endif - if (retval) - return retval; - info->flags |= ROCKET_NORMAL_ACTIVE; - return 0; +static void raise_dtr_rts(struct tty_port *port) +{ + struct r_port *info = container_of(port, struct r_port, port); + sSetDTR(&info->channel); + sSetRTS(&info->channel); } /* @@ -973,24 +886,26 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, static int rp_open(struct tty_struct *tty, struct file *filp) { struct r_port *info; + struct tty_port *port; int line = 0, retval; CHANNEL_t *cp; unsigned long page; line = tty->index; - if ((line < 0) || (line >= MAX_RP_PORTS) || ((info = rp_table[line]) == NULL)) + if (line < 0 || line >= MAX_RP_PORTS || ((info = rp_table[line]) == NULL)) return -ENXIO; - + port = &info->port; + page = __get_free_page(GFP_KERNEL); if (!page) return -ENOMEM; - if (info->flags & ROCKET_CLOSING) { + if (port->flags & ASYNC_CLOSING) { retval = wait_for_completion_interruptible(&info->close_wait); free_page(page); if (retval) return retval; - return ((info->flags & ROCKET_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS); + return ((port->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS); } /* @@ -1002,9 +917,9 @@ static int rp_open(struct tty_struct *tty, struct file *filp) info->xmit_buf = (unsigned char *) page; tty->driver_data = info; - info->port.tty = tty; + tty_port_tty_set(port, tty); - if (info->port.count++ == 0) { + if (port->count++ == 0) { atomic_inc(&rp_num_ports_open); #ifdef ROCKET_DEBUG_OPEN @@ -1019,7 +934,7 @@ static int rp_open(struct tty_struct *tty, struct file *filp) /* * Info->count is now 1; so it's safe to sleep now. */ - if ((info->flags & ROCKET_INITIALIZED) == 0) { + if (!test_bit(ASYNC_INITIALIZED, &port->flags)) { cp = &info->channel; sSetRxTrigger(cp, TRIG_1); if (sGetChanStatus(cp) & CD_ACT) @@ -1043,21 +958,21 @@ static int rp_open(struct tty_struct *tty, struct file *filp) sEnRxFIFO(cp); sEnTransmit(cp); - info->flags |= ROCKET_INITIALIZED; + set_bit(ASYNC_INITIALIZED, &info->port.flags); /* * Set up the tty->alt_speed kludge */ if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI) - info->port.tty->alt_speed = 57600; + tty->alt_speed = 57600; if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI) - info->port.tty->alt_speed = 115200; + tty->alt_speed = 115200; if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI) - info->port.tty->alt_speed = 230400; + tty->alt_speed = 230400; if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP) - info->port.tty->alt_speed = 460800; + tty->alt_speed = 460800; - configure_r_port(info, NULL); + configure_r_port(tty, info, NULL); if (tty->termios->c_cflag & CBAUD) { sSetDTR(cp); sSetRTS(cp); @@ -1066,7 +981,7 @@ static int rp_open(struct tty_struct *tty, struct file *filp) /* Starts (or resets) the maint polling loop */ mod_timer(&rocket_timer, jiffies + POLL_PERIOD); - retval = block_til_ready(tty, filp, info); + retval = tty_port_block_til_ready(port, tty, filp); if (retval) { #ifdef ROCKET_DEBUG_OPEN printk(KERN_INFO "rp_open returning after block_til_ready with %d\n", retval); @@ -1081,8 +996,8 @@ static int rp_open(struct tty_struct *tty, struct file *filp) */ static void rp_close(struct tty_struct *tty, struct file *filp) { - struct r_port *info = (struct r_port *) tty->driver_data; - unsigned long flags; + struct r_port *info = tty->driver_data; + struct tty_port *port = &info->port; int timeout; CHANNEL_t *cp; @@ -1093,53 +1008,10 @@ static void rp_close(struct tty_struct *tty, struct file *filp) printk(KERN_INFO "rp_close ttyR%d, count = %d\n", info->line, info->port.count); #endif - if (tty_hung_up_p(filp)) - return; - spin_lock_irqsave(&info->slock, flags); - - if ((tty->count == 1) && (info->port.count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. Info->count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk(KERN_WARNING "rp_close: bad serial port count; " - "tty->count is 1, info->port.count is %d\n", info->port.count); - info->port.count = 1; - } - if (--info->port.count < 0) { - printk(KERN_WARNING "rp_close: bad serial port count for " - "ttyR%d: %d\n", info->line, info->port.count); - info->port.count = 0; - } - if (info->port.count) { - spin_unlock_irqrestore(&info->slock, flags); + if (tty_port_close_start(port, tty, filp) == 0) return; - } - info->flags |= ROCKET_CLOSING; - spin_unlock_irqrestore(&info->slock, flags); cp = &info->channel; - - /* - * Notify the line discpline to only process XON/XOFF characters - */ - tty->closing = 1; - - /* - * If transmission was throttled by the application request, - * just flush the xmit buffer. - */ - if (tty->flow_stopped) - rp_flush_buffer(tty); - - /* - * Wait for the transmit buffer to clear - */ - if (info->port.closing_wait != ROCKET_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, info->port.closing_wait); /* * Before we drop DTR, make sure the UART transmitter * has completely drained; this is especially @@ -1168,19 +1040,24 @@ static void rp_close(struct tty_struct *tty, struct file *filp) clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); - if (info->port.blocked_open) { - if (info->port.close_delay) { - msleep_interruptible(jiffies_to_msecs(info->port.close_delay)); + /* We can't yet use tty_port_close_end as the buffer handling in this + driver is a bit different to the usual */ + + if (port->blocked_open) { + if (port->close_delay) { + msleep_interruptible(jiffies_to_msecs(port->close_delay)); } - wake_up_interruptible(&info->port.open_wait); + wake_up_interruptible(&port->open_wait); } else { if (info->xmit_buf) { free_page((unsigned long) info->xmit_buf); info->xmit_buf = NULL; } } - info->flags &= ~(ROCKET_INITIALIZED | ROCKET_CLOSING | ROCKET_NORMAL_ACTIVE); + info->port.flags &= ~(ASYNC_INITIALIZED | ASYNC_CLOSING | ASYNC_NORMAL_ACTIVE); tty->closing = 0; + tty_port_tty_set(port, NULL); + wake_up_interruptible(&port->close_wait); complete_all(&info->close_wait); atomic_dec(&rp_num_ports_open); @@ -1195,7 +1072,7 @@ static void rp_close(struct tty_struct *tty, struct file *filp) static void rp_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; CHANNEL_t *cp; unsigned cflag; @@ -1213,7 +1090,7 @@ static void rp_set_termios(struct tty_struct *tty, /* Or CMSPAR */ tty->termios->c_cflag &= ~CMSPAR; - configure_r_port(info, old_termios); + configure_r_port(tty, info, old_termios); cp = &info->channel; @@ -1238,7 +1115,7 @@ static void rp_set_termios(struct tty_struct *tty, static int rp_break(struct tty_struct *tty, int break_state) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; unsigned long flags; if (rocket_paranoia_check(info, "rp_break")) @@ -1284,7 +1161,7 @@ static int sGetChanRI(CHANNEL_T * ChP) */ static int rp_tiocmget(struct tty_struct *tty, struct file *file) { - struct r_port *info = (struct r_port *)tty->driver_data; + struct r_port *info = tty->driver_data; unsigned int control, result, ChanStatus; ChanStatus = sGetChanStatusLo(&info->channel); @@ -1305,7 +1182,7 @@ static int rp_tiocmget(struct tty_struct *tty, struct file *file) static int rp_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - struct r_port *info = (struct r_port *)tty->driver_data; + struct r_port *info = tty->driver_data; if (set & TIOCM_RTS) info->channel.TxControl[3] |= SET_RTS; @@ -1338,7 +1215,8 @@ static int get_config(struct r_port *info, struct rocket_config __user *retinfo) return 0; } -static int set_config(struct r_port *info, struct rocket_config __user *new_info) +static int set_config(struct tty_struct *tty, struct r_port *info, + struct rocket_config __user *new_info) { struct rocket_config new_serial; @@ -1350,7 +1228,7 @@ static int set_config(struct r_port *info, struct rocket_config __user *new_info if ((new_serial.flags & ~ROCKET_USR_MASK) != (info->flags & ~ROCKET_USR_MASK)) return -EPERM; info->flags = ((info->flags & ~ROCKET_USR_MASK) | (new_serial.flags & ROCKET_USR_MASK)); - configure_r_port(info, NULL); + configure_r_port(tty, info, NULL); return 0; } @@ -1359,15 +1237,15 @@ static int set_config(struct r_port *info, struct rocket_config __user *new_info info->port.closing_wait = new_serial.closing_wait; if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI) - info->port.tty->alt_speed = 57600; + tty->alt_speed = 57600; if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI) - info->port.tty->alt_speed = 115200; + tty->alt_speed = 115200; if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI) - info->port.tty->alt_speed = 230400; + tty->alt_speed = 230400; if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP) - info->port.tty->alt_speed = 460800; + tty->alt_speed = 460800; - configure_r_port(info, NULL); + configure_r_port(tty, info, NULL); return 0; } @@ -1434,7 +1312,7 @@ static int get_version(struct r_port *info, struct rocket_version __user *retver static int rp_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; void __user *argp = (void __user *)arg; int ret = 0; @@ -1452,7 +1330,7 @@ static int rp_ioctl(struct tty_struct *tty, struct file *file, ret = get_config(info, argp); break; case RCKP_SET_CONFIG: - ret = set_config(info, argp); + ret = set_config(tty, info, argp); break; case RCKP_GET_PORTS: ret = get_ports(info, argp); @@ -1472,7 +1350,7 @@ static int rp_ioctl(struct tty_struct *tty, struct file *file, static void rp_send_xchar(struct tty_struct *tty, char ch) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; CHANNEL_t *cp; if (rocket_paranoia_check(info, "rp_send_xchar")) @@ -1487,7 +1365,7 @@ static void rp_send_xchar(struct tty_struct *tty, char ch) static void rp_throttle(struct tty_struct *tty) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; CHANNEL_t *cp; #ifdef ROCKET_DEBUG_THROTTLE @@ -1507,7 +1385,7 @@ static void rp_throttle(struct tty_struct *tty) static void rp_unthrottle(struct tty_struct *tty) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; CHANNEL_t *cp; #ifdef ROCKET_DEBUG_THROTTLE printk(KERN_INFO "unthrottle %s: %d....\n", tty->name, @@ -1534,7 +1412,7 @@ static void rp_unthrottle(struct tty_struct *tty) */ static void rp_stop(struct tty_struct *tty) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; #ifdef ROCKET_DEBUG_FLOW printk(KERN_INFO "stop %s: %d %d....\n", tty->name, @@ -1550,7 +1428,7 @@ static void rp_stop(struct tty_struct *tty) static void rp_start(struct tty_struct *tty) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; #ifdef ROCKET_DEBUG_FLOW printk(KERN_INFO "start %s: %d %d....\n", tty->name, @@ -1570,7 +1448,7 @@ static void rp_start(struct tty_struct *tty) */ static void rp_wait_until_sent(struct tty_struct *tty, int timeout) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; CHANNEL_t *cp; unsigned long orig_jiffies; int check_time, exit_time; @@ -1627,7 +1505,7 @@ static void rp_wait_until_sent(struct tty_struct *tty, int timeout) static void rp_hangup(struct tty_struct *tty) { CHANNEL_t *cp; - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; if (rocket_paranoia_check(info, "rp_hangup")) return; @@ -1636,15 +1514,13 @@ static void rp_hangup(struct tty_struct *tty) printk(KERN_INFO "rp_hangup of ttyR%d...\n", info->line); #endif rp_flush_buffer(tty); - if (info->flags & ROCKET_CLOSING) + if (info->port.flags & ASYNC_CLOSING) return; if (info->port.count) atomic_dec(&rp_num_ports_open); clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); - info->port.count = 0; - info->flags &= ~ROCKET_NORMAL_ACTIVE; - info->port.tty = NULL; + tty_port_hangup(&info->port); cp = &info->channel; sDisRxFIFO(cp); @@ -1653,7 +1529,7 @@ static void rp_hangup(struct tty_struct *tty) sDisCTSFlowCtl(cp); sDisTxSoftFlowCtl(cp); sClrTxXOFF(cp); - info->flags &= ~ROCKET_INITIALIZED; + info->port.flags &= ~ASYNC_INITIALIZED; wake_up_interruptible(&info->port.open_wait); } @@ -1667,7 +1543,7 @@ static void rp_hangup(struct tty_struct *tty) */ static int rp_put_char(struct tty_struct *tty, unsigned char ch) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; CHANNEL_t *cp; unsigned long flags; @@ -1714,7 +1590,7 @@ static int rp_put_char(struct tty_struct *tty, unsigned char ch) static int rp_write(struct tty_struct *tty, const unsigned char *buf, int count) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; CHANNEL_t *cp; const unsigned char *b; int c, retval = 0; @@ -1764,7 +1640,8 @@ static int rp_write(struct tty_struct *tty, /* Write remaining data into the port's xmit_buf */ while (1) { - if (!info->port.tty) /* Seemingly obligatory check... */ + /* Hung up ? */ + if (!test_bit(ASYNC_NORMAL_ACTIVE, &info->port.flags)) goto end; c = min(count, XMIT_BUF_SIZE - info->xmit_cnt - 1); c = min(c, XMIT_BUF_SIZE - info->xmit_head); @@ -1806,7 +1683,7 @@ end: */ static int rp_write_room(struct tty_struct *tty) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; int ret; if (rocket_paranoia_check(info, "rp_write_room")) @@ -1827,7 +1704,7 @@ static int rp_write_room(struct tty_struct *tty) */ static int rp_chars_in_buffer(struct tty_struct *tty) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; CHANNEL_t *cp; if (rocket_paranoia_check(info, "rp_chars_in_buffer")) @@ -1848,7 +1725,7 @@ static int rp_chars_in_buffer(struct tty_struct *tty) */ static void rp_flush_buffer(struct tty_struct *tty) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; CHANNEL_t *cp; unsigned long flags; @@ -2371,6 +2248,11 @@ static const struct tty_operations rocket_ops = { .tiocmset = rp_tiocmset, }; +static const struct tty_port_operations rocket_port_ops = { + .carrier_raised = carrier_raised, + .raise_dtr_rts = raise_dtr_rts, +}; + /* * The module "startup" routine; it's run when the module is loaded. */ diff --git a/drivers/char/rocket.h b/drivers/char/rocket.h index a8b09195ebb..ec863f35f1a 100644 --- a/drivers/char/rocket.h +++ b/drivers/char/rocket.h @@ -39,7 +39,7 @@ struct rocket_version { /* * Rocketport flags */ -#define ROCKET_CALLOUT_NOHUP 0x00000001 +/*#define ROCKET_CALLOUT_NOHUP 0x00000001 */ #define ROCKET_FORCE_CD 0x00000002 #define ROCKET_HUP_NOTIFY 0x00000004 #define ROCKET_SPLIT_TERMIOS 0x00000008 diff --git a/drivers/char/rocket_int.h b/drivers/char/rocket_int.h index 21f3ff53ba3..67e0f1e778a 100644 --- a/drivers/char/rocket_int.h +++ b/drivers/char/rocket_int.h @@ -1162,11 +1162,6 @@ struct r_port { /* number of characters left in xmit buffer before we ask for more */ #define WAKEUP_CHARS 256 -/* Internal flags used only by the rocketport driver */ -#define ROCKET_INITIALIZED 0x80000000 /* Port is active */ -#define ROCKET_CLOSING 0x40000000 /* Serial port is closing */ -#define ROCKET_NORMAL_ACTIVE 0x20000000 /* Normal port is active */ - /* * Assigned major numbers for the Comtrol Rocketport */ diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c index 20d6efb6324..e0d0f8b2696 100644 --- a/drivers/char/rtc.c +++ b/drivers/char/rtc.c @@ -48,9 +48,10 @@ * CONFIG_HPET_EMULATE_RTC * 1.12a Maciej W. Rozycki: Handle memory-mapped chips properly. * 1.12ac Alan Cox: Allow read access to the day of week register + * 1.12b David John: Remove calls to the BKL. */ -#define RTC_VERSION "1.12ac" +#define RTC_VERSION "1.12b" /* * Note that *all* calls to CMOS_READ and CMOS_WRITE are done with @@ -73,7 +74,6 @@ #include <linux/proc_fs.h> #include <linux/seq_file.h> #include <linux/spinlock.h> -#include <linux/smp_lock.h> #include <linux/sysctl.h> #include <linux/wait.h> #include <linux/bcd.h> @@ -182,8 +182,8 @@ static int rtc_proc_open(struct inode *inode, struct file *file); /* * rtc_status is never changed by rtc_interrupt, and ioctl/open/close is - * protected by the big kernel lock. However, ioctl can still disable the timer - * in rtc_status and then with del_timer after the interrupt has read + * protected by the spin lock rtc_lock. However, ioctl can still disable the + * timer in rtc_status and then with del_timer after the interrupt has read * rtc_status but before mod_timer is called, which would then reenable the * timer (but you would need to have an awful timing before you'd trip on it) */ @@ -720,9 +720,7 @@ static int rtc_do_ioctl(unsigned int cmd, unsigned long arg, int kernel) static long rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { long ret; - lock_kernel(); ret = rtc_do_ioctl(cmd, arg, 0); - unlock_kernel(); return ret; } @@ -731,12 +729,8 @@ static long rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg) * Also clear the previous interrupt data on an open, and clean * up things on a close. */ - -/* We use rtc_lock to protect against concurrent opens. So the BKL is not - * needed here. Or anywhere else in this driver. */ static int rtc_open(struct inode *inode, struct file *file) { - lock_kernel(); spin_lock_irq(&rtc_lock); if (rtc_status & RTC_IS_OPEN) @@ -746,12 +740,10 @@ static int rtc_open(struct inode *inode, struct file *file) rtc_irq_data = 0; spin_unlock_irq(&rtc_lock); - unlock_kernel(); return 0; out_busy: spin_unlock_irq(&rtc_lock); - unlock_kernel(); return -EBUSY; } @@ -800,7 +792,6 @@ no_irq: } #ifdef RTC_IRQ -/* Called without the kernel lock - fine */ static unsigned int rtc_poll(struct file *file, poll_table *wait) { unsigned long l; diff --git a/drivers/char/selection.c b/drivers/char/selection.c index 2978a49a172..f29fbe9b8ed 100644 --- a/drivers/char/selection.c +++ b/drivers/char/selection.c @@ -306,7 +306,7 @@ int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *t */ int paste_selection(struct tty_struct *tty) { - struct vc_data *vc = (struct vc_data *)tty->driver_data; + struct vc_data *vc = tty->driver_data; int pasted = 0; unsigned int count; struct tty_ldisc *ld; diff --git a/drivers/char/ser_a2232.c b/drivers/char/ser_a2232.c index 7b0c35207d9..33872a219df 100644 --- a/drivers/char/ser_a2232.c +++ b/drivers/char/ser_a2232.c @@ -122,7 +122,7 @@ static void a2232_disable_tx_interrupts(void *ptr); static void a2232_enable_tx_interrupts(void *ptr); static void a2232_disable_rx_interrupts(void *ptr); static void a2232_enable_rx_interrupts(void *ptr); -static int a2232_get_CD(void *ptr); +static int a2232_carrier_raised(struct tty_port *port); static void a2232_shutdown_port(void *ptr); static int a2232_set_real_termios(void *ptr); static int a2232_chars_in_buffer(void *ptr); @@ -148,7 +148,6 @@ static struct real_driver a2232_real_driver = { a2232_enable_tx_interrupts, a2232_disable_rx_interrupts, a2232_enable_rx_interrupts, - a2232_get_CD, a2232_shutdown_port, a2232_set_real_termios, a2232_chars_in_buffer, @@ -260,9 +259,10 @@ static void a2232_enable_rx_interrupts(void *ptr) port->disable_rx = 0; } -static int a2232_get_CD(void *ptr) +static int a2232_carrier_raised(struct tty_port *port) { - return ((struct a2232_port *) ptr)->cd_status; + struct a2232_port *ap = container_of(port, struct a2232_port, gs.port); + return ap->cd_status; } static void a2232_shutdown_port(void *ptr) @@ -460,14 +460,14 @@ static void a2232_throttle(struct tty_struct *tty) if switched on. So the only thing we can do at this layer here is not taking any characters out of the A2232 buffer any more. */ - struct a2232_port *port = (struct a2232_port *) tty->driver_data; + struct a2232_port *port = tty->driver_data; port->throttle_input = -1; } static void a2232_unthrottle(struct tty_struct *tty) { /* Unthrottle: dual to "throttle()" above. */ - struct a2232_port *port = (struct a2232_port *) tty->driver_data; + struct a2232_port *port = tty->driver_data; port->throttle_input = 0; } @@ -638,6 +638,10 @@ int ch, err, n, p; return IRQ_HANDLED; } +static const struct tty_port_operations a2232_port_ops = { + .carrier_raised = a2232_carrier_raised, +}; + static void a2232_init_portstructs(void) { struct a2232_port *port; @@ -645,6 +649,8 @@ static void a2232_init_portstructs(void) for (i = 0; i < MAX_A2232_BOARDS*NUMLINES; i++) { port = a2232_ports + i; + tty_port_init(&port->gs.port); + port->gs.port.ops = &a2232_port_ops; port->which_a2232 = i/NUMLINES; port->which_port_on_a2232 = i%NUMLINES; port->disable_rx = port->throttle_input = port->cd_status = 0; @@ -652,11 +658,6 @@ static void a2232_init_portstructs(void) port->gs.close_delay = HZ/2; port->gs.closing_wait = 30 * HZ; port->gs.rd = &a2232_real_driver; -#ifdef NEW_WRITE_LOCKING - mutex_init(&(port->gs.port_write_mutex)); -#endif - init_waitqueue_head(&port->gs.port.open_wait); - init_waitqueue_head(&port->gs.port.close_wait); } } diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c index a8f15e6be59..f1f24f0ee26 100644 --- a/drivers/char/serial167.c +++ b/drivers/char/serial167.c @@ -315,7 +315,7 @@ u_short write_cy_cmd(volatile u_char * base_addr, u_char cmd) static void cy_stop(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; int channel; unsigned long flags; @@ -337,7 +337,7 @@ static void cy_stop(struct tty_struct *tty) static void cy_start(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; int channel; unsigned long flags; @@ -1062,7 +1062,7 @@ static void config_setup(struct cyclades_port *info) static int cy_put_char(struct tty_struct *tty, unsigned char ch) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; unsigned long flags; #ifdef SERIAL_DEBUG_IO @@ -1090,7 +1090,7 @@ static int cy_put_char(struct tty_struct *tty, unsigned char ch) static void cy_flush_chars(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; unsigned long flags; volatile unsigned char *base_addr = (u_char *) BASE_ADDR; int channel; @@ -1122,7 +1122,7 @@ static void cy_flush_chars(struct tty_struct *tty) */ static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; unsigned long flags; int c, total = 0; @@ -1166,7 +1166,7 @@ static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count) static int cy_write_room(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; int ret; #ifdef SERIAL_DEBUG_IO @@ -1183,7 +1183,7 @@ static int cy_write_room(struct tty_struct *tty) static int cy_chars_in_buffer(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; #ifdef SERIAL_DEBUG_IO printk("cy_chars_in_buffer %s %d\n", tty->name, info->xmit_cnt); /* */ @@ -1197,7 +1197,7 @@ static int cy_chars_in_buffer(struct tty_struct *tty) static void cy_flush_buffer(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; unsigned long flags; #ifdef SERIAL_DEBUG_IO @@ -1218,7 +1218,7 @@ static void cy_flush_buffer(struct tty_struct *tty) */ static void cy_throttle(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; unsigned long flags; volatile unsigned char *base_addr = (u_char *) BASE_ADDR; int channel; @@ -1250,7 +1250,7 @@ static void cy_throttle(struct tty_struct *tty) static void cy_unthrottle(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; unsigned long flags; volatile unsigned char *base_addr = (u_char *) BASE_ADDR; int channel; @@ -1345,7 +1345,7 @@ check_and_exit: static int cy_tiocmget(struct tty_struct *tty, struct file *file) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; int channel; volatile unsigned char *base_addr = (u_char *) BASE_ADDR; unsigned long flags; @@ -1369,7 +1369,7 @@ static int cy_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; int channel; volatile unsigned char *base_addr = (u_char *) BASE_ADDR; unsigned long flags; @@ -1532,7 +1532,7 @@ cy_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { unsigned long val; - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; int ret_val = 0; void __user *argp = (void __user *)arg; @@ -1607,7 +1607,7 @@ cy_ioctl(struct tty_struct *tty, struct file *file, static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; #ifdef SERIAL_DEBUG_OTHER printk("cy_set_termios %s\n", tty->name); @@ -1631,7 +1631,7 @@ static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios) static void cy_close(struct tty_struct *tty, struct file *filp) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; /* CP('C'); */ #ifdef SERIAL_DEBUG_OTHER @@ -1698,7 +1698,7 @@ static void cy_close(struct tty_struct *tty, struct file *filp) */ void cy_hangup(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; #ifdef SERIAL_DEBUG_OTHER printk("cy_hangup %s\n", tty->name); /* */ diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c index a16b94f12eb..3c67c3d83de 100644 --- a/drivers/char/specialix.c +++ b/drivers/char/specialix.c @@ -1450,7 +1450,7 @@ static int sx_open(struct tty_struct *tty, struct file *filp) static void sx_flush_buffer(struct tty_struct *tty) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; unsigned long flags; struct specialix_board *bp; @@ -1472,7 +1472,7 @@ static void sx_flush_buffer(struct tty_struct *tty) static void sx_close(struct tty_struct *tty, struct file *filp) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; struct specialix_board *bp; unsigned long flags; unsigned long timeout; @@ -1585,7 +1585,7 @@ static void sx_close(struct tty_struct *tty, struct file *filp) static int sx_write(struct tty_struct *tty, const unsigned char *buf, int count) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; struct specialix_board *bp; int c, total = 0; unsigned long flags; @@ -1637,7 +1637,7 @@ static int sx_write(struct tty_struct *tty, static int sx_put_char(struct tty_struct *tty, unsigned char ch) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; unsigned long flags; struct specialix_board *bp; @@ -1676,7 +1676,7 @@ static int sx_put_char(struct tty_struct *tty, unsigned char ch) static void sx_flush_chars(struct tty_struct *tty) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; unsigned long flags; struct specialix_board *bp = port_Board(port); @@ -1703,7 +1703,7 @@ static void sx_flush_chars(struct tty_struct *tty) static int sx_write_room(struct tty_struct *tty) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; int ret; func_enter(); @@ -1724,7 +1724,7 @@ static int sx_write_room(struct tty_struct *tty) static int sx_chars_in_buffer(struct tty_struct *tty) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; func_enter(); @@ -1738,7 +1738,7 @@ static int sx_chars_in_buffer(struct tty_struct *tty) static int sx_tiocmget(struct tty_struct *tty, struct file *file) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; struct specialix_board *bp; unsigned char status; unsigned int result; @@ -1780,7 +1780,7 @@ static int sx_tiocmget(struct tty_struct *tty, struct file *file) static int sx_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; unsigned long flags; struct specialix_board *bp; @@ -1820,7 +1820,7 @@ static int sx_tiocmset(struct tty_struct *tty, struct file *file, static int sx_send_break(struct tty_struct *tty, int length) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; struct specialix_board *bp = port_Board(port); unsigned long flags; @@ -1931,7 +1931,7 @@ static int sx_get_serial_info(struct specialix_port *port, static int sx_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, unsigned long arg) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; void __user *argp = (void __user *)arg; func_enter(); @@ -1959,7 +1959,7 @@ static int sx_ioctl(struct tty_struct *tty, struct file *filp, static void sx_throttle(struct tty_struct *tty) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; struct specialix_board *bp; unsigned long flags; @@ -2004,7 +2004,7 @@ static void sx_throttle(struct tty_struct *tty) static void sx_unthrottle(struct tty_struct *tty) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; struct specialix_board *bp; unsigned long flags; @@ -2045,7 +2045,7 @@ static void sx_unthrottle(struct tty_struct *tty) static void sx_stop(struct tty_struct *tty) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; struct specialix_board *bp; unsigned long flags; @@ -2072,7 +2072,7 @@ static void sx_stop(struct tty_struct *tty) static void sx_start(struct tty_struct *tty) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; struct specialix_board *bp; unsigned long flags; @@ -2100,7 +2100,7 @@ static void sx_start(struct tty_struct *tty) static void sx_hangup(struct tty_struct *tty) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; struct specialix_board *bp; unsigned long flags; @@ -2135,7 +2135,7 @@ static void sx_hangup(struct tty_struct *tty) static void sx_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; unsigned long flags; struct specialix_board *bp; diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c index 963b03fb29e..e1e0dd89ac9 100644 --- a/drivers/char/stallion.c +++ b/drivers/char/stallion.c @@ -130,6 +130,8 @@ static char stl_unwanted[SC26198_RXFIFOSIZE]; static DEFINE_MUTEX(stl_brdslock); static struct stlbrd *stl_brds[STL_MAXBRDS]; +static const struct tty_port_operations stl_port_ops; + /* * Per board state flags. Used with the state field of the board struct. * Not really much here! @@ -407,7 +409,6 @@ static int stl_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, uns static int stl_brdinit(struct stlbrd *brdp); static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comstats_t __user *cp); static int stl_clrportstats(struct stlport *portp, comstats_t __user *cp); -static int stl_waitcarrier(struct tty_struct *tty, struct stlport *portp, struct file *filp); /* * CD1400 uart specific handling functions. @@ -703,8 +704,9 @@ static int stl_open(struct tty_struct *tty, struct file *filp) { struct stlport *portp; struct stlbrd *brdp; + struct tty_port *port; unsigned int minordev, brdnr, panelnr; - int portnr, rc; + int portnr; pr_debug("stl_open(tty=%p,filp=%p): device=%s\n", tty, filp, tty->name); @@ -715,6 +717,7 @@ static int stl_open(struct tty_struct *tty, struct file *filp) brdp = stl_brds[brdnr]; if (brdp == NULL) return -ENODEV; + minordev = MINOR2PORT(minordev); for (portnr = -1, panelnr = 0; panelnr < STL_MAXPANELS; panelnr++) { if (brdp->panels[panelnr] == NULL) @@ -731,16 +734,17 @@ static int stl_open(struct tty_struct *tty, struct file *filp) portp = brdp->panels[panelnr]->ports[portnr]; if (portp == NULL) return -ENODEV; + port = &portp->port; /* * On the first open of the device setup the port hardware, and * initialize the per port data structure. */ - tty_port_tty_set(&portp->port, tty); + tty_port_tty_set(port, tty); tty->driver_data = portp; - portp->port.count++; + port->count++; - if ((portp->port.flags & ASYNC_INITIALIZED) == 0) { + if ((port->flags & ASYNC_INITIALIZED) == 0) { if (!portp->tx.buf) { portp->tx.buf = kmalloc(STL_TXBUFSIZE, GFP_KERNEL); if (!portp->tx.buf) @@ -754,91 +758,24 @@ static int stl_open(struct tty_struct *tty, struct file *filp) stl_enablerxtx(portp, 1, 1); stl_startrxtx(portp, 1, 0); clear_bit(TTY_IO_ERROR, &tty->flags); - portp->port.flags |= ASYNC_INITIALIZED; - } - -/* - * Check if this port is in the middle of closing. If so then wait - * until it is closed then return error status, based on flag settings. - * The sleep here does not need interrupt protection since the wakeup - * for it is done with the same context. - */ - if (portp->port.flags & ASYNC_CLOSING) { - interruptible_sleep_on(&portp->port.close_wait); - if (portp->port.flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - return -ERESTARTSYS; + port->flags |= ASYNC_INITIALIZED; } - -/* - * Based on type of open being done check if it can overlap with any - * previous opens still in effect. If we are a normal serial device - * then also we might have to wait for carrier. - */ - if (!(filp->f_flags & O_NONBLOCK)) - if ((rc = stl_waitcarrier(tty, portp, filp)) != 0) - return rc; - - portp->port.flags |= ASYNC_NORMAL_ACTIVE; - - return 0; + return tty_port_block_til_ready(port, tty, filp); } /*****************************************************************************/ -/* - * Possibly need to wait for carrier (DCD signal) to come high. Say - * maybe because if we are clocal then we don't need to wait... - */ - -static int stl_waitcarrier(struct tty_struct *tty, struct stlport *portp, - struct file *filp) +static int stl_carrier_raised(struct tty_port *port) { - unsigned long flags; - int rc, doclocal; - - pr_debug("stl_waitcarrier(portp=%p,filp=%p)\n", portp, filp); - - rc = 0; - doclocal = 0; - - spin_lock_irqsave(&stallion_lock, flags); - - if (tty->termios->c_cflag & CLOCAL) - doclocal++; - - portp->openwaitcnt++; - if (! tty_hung_up_p(filp)) - portp->port.count--; - - for (;;) { - /* Takes brd_lock internally */ - stl_setsignals(portp, 1, 1); - if (tty_hung_up_p(filp) || - ((portp->port.flags & ASYNC_INITIALIZED) == 0)) { - if (portp->port.flags & ASYNC_HUP_NOTIFY) - rc = -EBUSY; - else - rc = -ERESTARTSYS; - break; - } - if (((portp->port.flags & ASYNC_CLOSING) == 0) && - (doclocal || (portp->sigs & TIOCM_CD))) - break; - if (signal_pending(current)) { - rc = -ERESTARTSYS; - break; - } - /* FIXME */ - interruptible_sleep_on(&portp->port.open_wait); - } - - if (! tty_hung_up_p(filp)) - portp->port.count++; - portp->openwaitcnt--; - spin_unlock_irqrestore(&stallion_lock, flags); + struct stlport *portp = container_of(port, struct stlport, port); + return (portp->sigs & TIOCM_CD) ? 1 : 0; +} - return rc; +static void stl_raise_dtr_rts(struct tty_port *port) +{ + struct stlport *portp = container_of(port, struct stlport, port); + /* Takes brd_lock internally */ + stl_setsignals(portp, 1, 1); } /*****************************************************************************/ @@ -890,47 +827,29 @@ static void stl_waituntilsent(struct tty_struct *tty, int timeout) static void stl_close(struct tty_struct *tty, struct file *filp) { struct stlport *portp; + struct tty_port *port; unsigned long flags; pr_debug("stl_close(tty=%p,filp=%p)\n", tty, filp); portp = tty->driver_data; - if (portp == NULL) - return; + BUG_ON(portp == NULL); - spin_lock_irqsave(&stallion_lock, flags); - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&stallion_lock, flags); - return; - } - if ((tty->count == 1) && (portp->port.count != 1)) - portp->port.count = 1; - if (portp->port.count-- > 1) { - spin_unlock_irqrestore(&stallion_lock, flags); - return; - } - - portp->port.count = 0; - portp->port.flags |= ASYNC_CLOSING; + port = &portp->port; + if (tty_port_close_start(port, tty, filp) == 0) + return; /* * May want to wait for any data to drain before closing. The BUSY * flag keeps track of whether we are still sending or not - it is * very accurate for the cd1400, not quite so for the sc26198. * (The sc26198 has no "end-of-data" interrupt only empty FIFO) */ - tty->closing = 1; - - spin_unlock_irqrestore(&stallion_lock, flags); - - if (portp->closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, portp->closing_wait); stl_waituntilsent(tty, (HZ / 2)); - - spin_lock_irqsave(&stallion_lock, flags); + spin_lock_irqsave(&port->lock, flags); portp->port.flags &= ~ASYNC_INITIALIZED; - spin_unlock_irqrestore(&stallion_lock, flags); + spin_unlock_irqrestore(&port->lock, flags); stl_disableintrs(portp); if (tty->termios->c_cflag & HUPCL) @@ -944,20 +863,9 @@ static void stl_close(struct tty_struct *tty, struct file *filp) portp->tx.head = NULL; portp->tx.tail = NULL; } - set_bit(TTY_IO_ERROR, &tty->flags); - tty_ldisc_flush(tty); - tty->closing = 0; - tty_port_tty_set(&portp->port, NULL); - - if (portp->openwaitcnt) { - if (portp->close_delay) - msleep_interruptible(jiffies_to_msecs(portp->close_delay)); - wake_up_interruptible(&portp->port.open_wait); - } - - portp->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&portp->port.close_wait); + tty_port_close_end(port, tty); + tty_port_tty_set(port, NULL); } /*****************************************************************************/ @@ -1405,14 +1313,20 @@ static void stl_stop(struct tty_struct *tty) static void stl_hangup(struct tty_struct *tty) { struct stlport *portp; + struct tty_port *port; + unsigned long flags; pr_debug("stl_hangup(tty=%p)\n", tty); portp = tty->driver_data; if (portp == NULL) return; + port = &portp->port; + + spin_lock_irqsave(&port->lock, flags); + port->flags &= ~ASYNC_INITIALIZED; + spin_unlock_irqrestore(&port->lock, flags); - portp->port.flags &= ~ASYNC_INITIALIZED; stl_disableintrs(portp); if (tty->termios->c_cflag & HUPCL) stl_setsignals(portp, 0, 0); @@ -1426,10 +1340,7 @@ static void stl_hangup(struct tty_struct *tty) portp->tx.head = NULL; portp->tx.tail = NULL; } - tty_port_tty_set(&portp->port, NULL); - portp->port.flags &= ~ASYNC_NORMAL_ACTIVE; - portp->port.count = 0; - wake_up_interruptible(&portp->port.open_wait); + tty_port_hangup(port); } /*****************************************************************************/ @@ -1776,6 +1687,7 @@ static int __devinit stl_initports(struct stlbrd *brdp, struct stlpanel *panelp) break; } tty_port_init(&portp->port); + portp->port.ops = &stl_port_ops; portp->magic = STL_PORTMAGIC; portp->portnr = i; portp->brdnr = panelp->brdnr; @@ -2659,6 +2571,11 @@ static const struct tty_operations stl_ops = { .tiocmset = stl_tiocmset, }; +static const struct tty_port_operations stl_port_ops = { + .carrier_raised = stl_carrier_raised, + .raise_dtr_rts = stl_raise_dtr_rts, +}; + /*****************************************************************************/ /* CD1400 HARDWARE FUNCTIONS */ /*****************************************************************************/ diff --git a/drivers/char/sx.c b/drivers/char/sx.c index ba4e86281fb..b60be7b0dec 100644 --- a/drivers/char/sx.c +++ b/drivers/char/sx.c @@ -279,7 +279,7 @@ static void sx_disable_tx_interrupts(void *ptr); static void sx_enable_tx_interrupts(void *ptr); static void sx_disable_rx_interrupts(void *ptr); static void sx_enable_rx_interrupts(void *ptr); -static int sx_get_CD(void *ptr); +static int sx_carrier_raised(struct tty_port *port); static void sx_shutdown_port(void *ptr); static int sx_set_real_termios(void *ptr); static void sx_close(void *ptr); @@ -360,7 +360,6 @@ static struct real_driver sx_real_driver = { sx_enable_tx_interrupts, sx_disable_rx_interrupts, sx_enable_rx_interrupts, - sx_get_CD, sx_shutdown_port, sx_set_real_termios, sx_chars_in_buffer, @@ -791,7 +790,7 @@ static int sx_getsignals(struct sx_port *port) sx_dprintk(SX_DEBUG_MODEMSIGNALS, "getsignals: %d/%d (%d/%d) " "%02x/%02x\n", (o_stat & OP_DTR) != 0, (o_stat & OP_RTS) != 0, - port->c_dcd, sx_get_CD(port), + port->c_dcd, tty_port_carrier_raised(&port->gs.port), sx_read_channel_byte(port, hi_ip), sx_read_channel_byte(port, hi_state)); @@ -1190,7 +1189,7 @@ static inline void sx_check_modem_signals(struct sx_port *port) hi_state = sx_read_channel_byte(port, hi_state); sx_dprintk(SX_DEBUG_MODEMSIGNALS, "Checking modem signals (%d/%d)\n", - port->c_dcd, sx_get_CD(port)); + port->c_dcd, tty_port_carrier_raised(&port->gs.port)); if (hi_state & ST_BREAK) { hi_state &= ~ST_BREAK; @@ -1202,11 +1201,11 @@ static inline void sx_check_modem_signals(struct sx_port *port) hi_state &= ~ST_DCD; sx_dprintk(SX_DEBUG_MODEMSIGNALS, "got a DCD change.\n"); sx_write_channel_byte(port, hi_state, hi_state); - c_dcd = sx_get_CD(port); + c_dcd = tty_port_carrier_raised(&port->gs.port); sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD is now %d\n", c_dcd); if (c_dcd != port->c_dcd) { port->c_dcd = c_dcd; - if (sx_get_CD(port)) { + if (tty_port_carrier_raised(&port->gs.port)) { /* DCD went UP */ if ((sx_read_channel_byte(port, hi_hstat) != HS_IDLE_CLOSED) && @@ -1415,13 +1414,10 @@ static void sx_enable_rx_interrupts(void *ptr) } /* Jeez. Isn't this simple? */ -static int sx_get_CD(void *ptr) +static int sx_carrier_raised(struct tty_port *port) { - struct sx_port *port = ptr; - func_enter2(); - - func_exit(); - return ((sx_read_channel_byte(port, hi_ip) & IP_DCD) != 0); + struct sx_port *sp = container_of(port, struct sx_port, gs.port); + return ((sx_read_channel_byte(sp, hi_ip) & IP_DCD) != 0); } /* Jeez. Isn't this simple? */ @@ -1536,7 +1532,7 @@ static int sx_open(struct tty_struct *tty, struct file *filp) } /* tty->low_latency = 1; */ - port->c_dcd = sx_get_CD(port); + port->c_dcd = sx_carrier_raised(&port->gs.port); sx_dprintk(SX_DEBUG_OPEN, "at open: cd=%d\n", port->c_dcd); func_exit(); @@ -1945,7 +1941,7 @@ static int sx_ioctl(struct tty_struct *tty, struct file *filp, static void sx_throttle(struct tty_struct *tty) { - struct sx_port *port = (struct sx_port *)tty->driver_data; + struct sx_port *port = tty->driver_data; func_enter2(); /* If the port is using any type of input flow @@ -1959,7 +1955,7 @@ static void sx_throttle(struct tty_struct *tty) static void sx_unthrottle(struct tty_struct *tty) { - struct sx_port *port = (struct sx_port *)tty->driver_data; + struct sx_port *port = tty->driver_data; func_enter2(); /* Always unthrottle even if flow control is not enabled on @@ -2354,6 +2350,10 @@ static const struct tty_operations sx_ops = { .tiocmset = sx_tiocmset, }; +static const struct tty_port_operations sx_port_ops = { + .carrier_raised = sx_carrier_raised, +}; + static int sx_init_drivers(void) { int error; @@ -2410,6 +2410,7 @@ static int sx_init_portstructs(int nboards, int nports) for (j = 0; j < boards[i].nports; j++) { sx_dprintk(SX_DEBUG_INIT, "initing port %d\n", j); tty_port_init(&port->gs.port); + port->gs.port.ops = &sx_port_ops; port->gs.magic = SX_MAGIC; port->gs.close_delay = HZ / 2; port->gs.closing_wait = 30 * HZ; diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c index 500f5176b6b..b8063d4cad3 100644 --- a/drivers/char/synclink.c +++ b/drivers/char/synclink.c @@ -977,7 +977,7 @@ static void ldisc_receive_buf(struct tty_struct *tty, */ static void mgsl_stop(struct tty_struct *tty) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; if (mgsl_paranoia_check(info, tty->name, "mgsl_stop")) @@ -1000,7 +1000,7 @@ static void mgsl_stop(struct tty_struct *tty) */ static void mgsl_start(struct tty_struct *tty) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; if (mgsl_paranoia_check(info, tty->name, "mgsl_start")) @@ -2057,7 +2057,7 @@ static int mgsl_put_char(struct tty_struct *tty, unsigned char ch) */ static void mgsl_flush_chars(struct tty_struct *tty) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; if ( debug_level >= DEBUG_LEVEL_INFO ) @@ -2109,7 +2109,7 @@ static int mgsl_write(struct tty_struct * tty, const unsigned char *buf, int count) { int c, ret = 0; - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; if ( debug_level >= DEBUG_LEVEL_INFO ) @@ -2232,7 +2232,7 @@ cleanup: */ static int mgsl_write_room(struct tty_struct *tty) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; int ret; if (mgsl_paranoia_check(info, tty->name, "mgsl_write_room")) @@ -2267,7 +2267,7 @@ static int mgsl_write_room(struct tty_struct *tty) */ static int mgsl_chars_in_buffer(struct tty_struct *tty) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgsl_chars_in_buffer(%s)\n", @@ -2301,7 +2301,7 @@ static int mgsl_chars_in_buffer(struct tty_struct *tty) */ static void mgsl_flush_buffer(struct tty_struct *tty) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -2329,7 +2329,7 @@ static void mgsl_flush_buffer(struct tty_struct *tty) */ static void mgsl_send_xchar(struct tty_struct *tty, char ch) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -2358,7 +2358,7 @@ static void mgsl_send_xchar(struct tty_struct *tty, char ch) */ static void mgsl_throttle(struct tty_struct * tty) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -2388,7 +2388,7 @@ static void mgsl_throttle(struct tty_struct * tty) */ static void mgsl_unthrottle(struct tty_struct * tty) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -2841,7 +2841,7 @@ static int modem_input_wait(struct mgsl_struct *info,int arg) */ static int tiocmget(struct tty_struct *tty, struct file *file) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned int result; unsigned long flags; @@ -2867,7 +2867,7 @@ static int tiocmget(struct tty_struct *tty, struct file *file) static int tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -2898,7 +2898,7 @@ static int tiocmset(struct tty_struct *tty, struct file *file, */ static int mgsl_break(struct tty_struct *tty, int break_state) { - struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct * info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -2932,7 +2932,7 @@ static int mgsl_break(struct tty_struct *tty, int break_state) static int mgsl_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg) { - struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct * info = tty->driver_data; int ret; if (debug_level >= DEBUG_LEVEL_INFO) @@ -3042,7 +3042,7 @@ static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigne */ static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -3096,7 +3096,7 @@ static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termio */ static void mgsl_close(struct tty_struct *tty, struct file * filp) { - struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct * info = tty->driver_data; if (mgsl_paranoia_check(info, tty->name, "mgsl_close")) return; @@ -3104,70 +3104,18 @@ static void mgsl_close(struct tty_struct *tty, struct file * filp) if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgsl_close(%s) entry, count=%d\n", __FILE__,__LINE__, info->device_name, info->port.count); - - if (!info->port.count) - return; - if (tty_hung_up_p(filp)) + if (tty_port_close_start(&info->port, tty, filp) == 0) goto cleanup; - if ((tty->count == 1) && (info->port.count != 1)) { - /* - * tty->count is 1 and the tty structure will be freed. - * info->port.count should be one in this case. - * if it's not, correct it so that the port is shutdown. - */ - printk("mgsl_close: bad refcount; tty->count is 1, " - "info->port.count is %d\n", info->port.count); - info->port.count = 1; - } - - info->port.count--; - - /* if at least one open remaining, leave hardware active */ - if (info->port.count) - goto cleanup; - - info->port.flags |= ASYNC_CLOSING; - - /* set tty->closing to notify line discipline to - * only process XON/XOFF characters. Only the N_TTY - * discipline appears to use this (ppp does not). - */ - tty->closing = 1; - - /* wait for transmit data to clear all layers */ - - if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) { - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_close(%s) calling tty_wait_until_sent\n", - __FILE__,__LINE__, info->device_name ); - tty_wait_until_sent(tty, info->port.closing_wait); - } - if (info->port.flags & ASYNC_INITIALIZED) mgsl_wait_until_sent(tty, info->timeout); - mgsl_flush_buffer(tty); - tty_ldisc_flush(tty); - shutdown(info); - - tty->closing = 0; + + tty_port_close_end(&info->port, tty); info->port.tty = NULL; - - if (info->port.blocked_open) { - if (info->port.close_delay) { - msleep_interruptible(jiffies_to_msecs(info->port.close_delay)); - } - wake_up_interruptible(&info->port.open_wait); - } - - info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - - wake_up_interruptible(&info->port.close_wait); - cleanup: if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgsl_close(%s) exit, count=%d\n", __FILE__,__LINE__, @@ -3188,7 +3136,7 @@ cleanup: */ static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout) { - struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct * info = tty->driver_data; unsigned long orig_jiffies, char_time; if (!info ) @@ -3261,7 +3209,7 @@ exit: */ static void mgsl_hangup(struct tty_struct *tty) { - struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct * info = tty->driver_data; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgsl_hangup(%s)\n", @@ -3281,6 +3229,35 @@ static void mgsl_hangup(struct tty_struct *tty) } /* end of mgsl_hangup() */ +/* + * carrier_raised() + * + * Return true if carrier is raised + */ + +static int carrier_raised(struct tty_port *port) +{ + unsigned long flags; + struct mgsl_struct *info = container_of(port, struct mgsl_struct, port); + + spin_lock_irqsave(&info->irq_spinlock, flags); + usc_get_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock, flags); + return (info->serial_signals & SerialSignal_DCD) ? 1 : 0; +} + +static void raise_dtr_rts(struct tty_port *port) +{ + struct mgsl_struct *info = container_of(port, struct mgsl_struct, port); + unsigned long flags; + + spin_lock_irqsave(&info->irq_spinlock,flags); + info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + usc_set_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); +} + + /* block_til_ready() * * Block the current process until the specified port @@ -3302,6 +3279,8 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, bool do_clocal = false; bool extra_count = false; unsigned long flags; + int dcd; + struct tty_port *port = &info->port; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):block_til_ready on %s\n", @@ -3309,7 +3288,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){ /* nonblock mode is set or port is not enabled */ - info->port.flags |= ASYNC_NORMAL_ACTIVE; + port->flags |= ASYNC_NORMAL_ACTIVE; return 0; } @@ -3318,50 +3297,42 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, /* Wait for carrier detect and the line to become * free (i.e., not in use by the callout). While we are in - * this loop, info->port.count is dropped by one, so that + * this loop, port->count is dropped by one, so that * mgsl_close() knows when to free things. We restore it upon * exit, either normal or abnormal. */ retval = 0; - add_wait_queue(&info->port.open_wait, &wait); + add_wait_queue(&port->open_wait, &wait); if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):block_til_ready before block on %s count=%d\n", - __FILE__,__LINE__, tty->driver->name, info->port.count ); + __FILE__,__LINE__, tty->driver->name, port->count ); spin_lock_irqsave(&info->irq_spinlock, flags); if (!tty_hung_up_p(filp)) { extra_count = true; - info->port.count--; + port->count--; } spin_unlock_irqrestore(&info->irq_spinlock, flags); - info->port.blocked_open++; + port->blocked_open++; while (1) { - if (tty->termios->c_cflag & CBAUD) { - spin_lock_irqsave(&info->irq_spinlock,flags); - info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; - usc_set_serial_signals(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - } + if (tty->termios->c_cflag & CBAUD) + tty_port_raise_dtr_rts(port); set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || !(info->port.flags & ASYNC_INITIALIZED)){ - retval = (info->port.flags & ASYNC_HUP_NOTIFY) ? + if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){ + retval = (port->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS; break; } - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_get_serial_signals(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); + dcd = tty_port_carrier_raised(&info->port); - if (!(info->port.flags & ASYNC_CLOSING) && - (do_clocal || (info->serial_signals & SerialSignal_DCD)) ) { + if (!(port->flags & ASYNC_CLOSING) && (do_clocal || dcd)) break; - } if (signal_pending(current)) { retval = -ERESTARTSYS; @@ -3370,24 +3341,25 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):block_til_ready blocking on %s count=%d\n", - __FILE__,__LINE__, tty->driver->name, info->port.count ); + __FILE__,__LINE__, tty->driver->name, port->count ); schedule(); } set_current_state(TASK_RUNNING); - remove_wait_queue(&info->port.open_wait, &wait); + remove_wait_queue(&port->open_wait, &wait); + /* FIXME: Racy on hangup during close wait */ if (extra_count) - info->port.count++; - info->port.blocked_open--; + port->count++; + port->blocked_open--; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):block_til_ready after blocking on %s count=%d\n", - __FILE__,__LINE__, tty->driver->name, info->port.count ); + __FILE__,__LINE__, tty->driver->name, port->count ); if (!retval) - info->port.flags |= ASYNC_NORMAL_ACTIVE; + port->flags |= ASYNC_NORMAL_ACTIVE; return retval; @@ -4304,6 +4276,12 @@ static void mgsl_add_device( struct mgsl_struct *info ) } /* end of mgsl_add_device() */ +static const struct tty_port_operations mgsl_port_ops = { + .carrier_raised = carrier_raised, + .raise_dtr_rts = raise_dtr_rts, +}; + + /* mgsl_allocate_device() * * Allocate and initialize a device instance structure @@ -4322,6 +4300,7 @@ static struct mgsl_struct* mgsl_allocate_device(void) printk("Error can't allocate device instance data\n"); } else { tty_port_init(&info->port); + info->port.ops = &mgsl_port_ops; info->magic = MGSL_MAGIC; INIT_WORK(&info->task, mgsl_bh_handler); info->max_frame_size = 4096; diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index 08911ed6649..53544e21f19 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -720,44 +720,9 @@ static void close(struct tty_struct *tty, struct file *filp) return; DBGINFO(("%s close entry, count=%d\n", info->device_name, info->port.count)); - if (!info->port.count) - return; - - if (tty_hung_up_p(filp)) - goto cleanup; - - if ((tty->count == 1) && (info->port.count != 1)) { - /* - * tty->count is 1 and the tty structure will be freed. - * info->port.count should be one in this case. - * if it's not, correct it so that the port is shutdown. - */ - DBGERR(("%s close: bad refcount; tty->count=1, " - "info->port.count=%d\n", info->device_name, info->port.count)); - info->port.count = 1; - } - - info->port.count--; - - /* if at least one open remaining, leave hardware active */ - if (info->port.count) + if (tty_port_close_start(&info->port, tty, filp) == 0) goto cleanup; - info->port.flags |= ASYNC_CLOSING; - - /* set tty->closing to notify line discipline to - * only process XON/XOFF characters. Only the N_TTY - * discipline appears to use this (ppp does not). - */ - tty->closing = 1; - - /* wait for transmit data to clear all layers */ - - if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) { - DBGINFO(("%s call tty_wait_until_sent\n", info->device_name)); - tty_wait_until_sent(tty, info->port.closing_wait); - } - if (info->port.flags & ASYNC_INITIALIZED) wait_until_sent(tty, info->timeout); flush_buffer(tty); @@ -765,20 +730,8 @@ static void close(struct tty_struct *tty, struct file *filp) shutdown(info); - tty->closing = 0; + tty_port_close_end(&info->port, tty); info->port.tty = NULL; - - if (info->port.blocked_open) { - if (info->port.close_delay) { - msleep_interruptible(jiffies_to_msecs(info->port.close_delay)); - } - wake_up_interruptible(&info->port.open_wait); - } - - info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - - wake_up_interruptible(&info->port.close_wait); - cleanup: DBGINFO(("%s close exit, count=%d\n", tty->driver->name, info->port.count)); } @@ -3132,6 +3085,29 @@ static int tiocmset(struct tty_struct *tty, struct file *file, return 0; } +static int carrier_raised(struct tty_port *port) +{ + unsigned long flags; + struct slgt_info *info = container_of(port, struct slgt_info, port); + + spin_lock_irqsave(&info->lock,flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + return (info->signals & SerialSignal_DCD) ? 1 : 0; +} + +static void raise_dtr_rts(struct tty_port *port) +{ + unsigned long flags; + struct slgt_info *info = container_of(port, struct slgt_info, port); + + spin_lock_irqsave(&info->lock,flags); + info->signals |= SerialSignal_RTS + SerialSignal_DTR; + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); +} + + /* * block current process until the device is ready to open */ @@ -3143,12 +3119,14 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, bool do_clocal = false; bool extra_count = false; unsigned long flags; + int cd; + struct tty_port *port = &info->port; DBGINFO(("%s block_til_ready\n", tty->driver->name)); if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){ /* nonblock mode is set or port is not enabled */ - info->port.flags |= ASYNC_NORMAL_ACTIVE; + port->flags |= ASYNC_NORMAL_ACTIVE; return 0; } @@ -3157,46 +3135,38 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, /* Wait for carrier detect and the line to become * free (i.e., not in use by the callout). While we are in - * this loop, info->port.count is dropped by one, so that + * this loop, port->count is dropped by one, so that * close() knows when to free things. We restore it upon * exit, either normal or abnormal. */ retval = 0; - add_wait_queue(&info->port.open_wait, &wait); + add_wait_queue(&port->open_wait, &wait); spin_lock_irqsave(&info->lock, flags); if (!tty_hung_up_p(filp)) { extra_count = true; - info->port.count--; + port->count--; } spin_unlock_irqrestore(&info->lock, flags); - info->port.blocked_open++; + port->blocked_open++; while (1) { - if ((tty->termios->c_cflag & CBAUD)) { - spin_lock_irqsave(&info->lock,flags); - info->signals |= SerialSignal_RTS + SerialSignal_DTR; - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - } + if ((tty->termios->c_cflag & CBAUD)) + tty_port_raise_dtr_rts(port); set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || !(info->port.flags & ASYNC_INITIALIZED)){ - retval = (info->port.flags & ASYNC_HUP_NOTIFY) ? + if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){ + retval = (port->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS; break; } - spin_lock_irqsave(&info->lock,flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock,flags); + cd = tty_port_carrier_raised(port); - if (!(info->port.flags & ASYNC_CLOSING) && - (do_clocal || (info->signals & SerialSignal_DCD)) ) { + if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd )) break; - } if (signal_pending(current)) { retval = -ERESTARTSYS; @@ -3208,14 +3178,14 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, } set_current_state(TASK_RUNNING); - remove_wait_queue(&info->port.open_wait, &wait); + remove_wait_queue(&port->open_wait, &wait); if (extra_count) - info->port.count++; - info->port.blocked_open--; + port->count++; + port->blocked_open--; if (!retval) - info->port.flags |= ASYNC_NORMAL_ACTIVE; + port->flags |= ASYNC_NORMAL_ACTIVE; DBGINFO(("%s block_til_ready ready, rc=%d\n", tty->driver->name, retval)); return retval; @@ -3444,6 +3414,11 @@ static void add_device(struct slgt_info *info) #endif } +static const struct tty_port_operations slgt_port_ops = { + .carrier_raised = carrier_raised, + .raise_dtr_rts = raise_dtr_rts, +}; + /* * allocate device instance structure, return NULL on failure */ @@ -3458,6 +3433,7 @@ static struct slgt_info *alloc_dev(int adapter_num, int port_num, struct pci_dev driver_name, adapter_num, port_num)); } else { tty_port_init(&info->port); + info->port.ops = &slgt_port_ops; info->magic = MGSL_MAGIC; INIT_WORK(&info->task, bh_handler); info->max_frame_size = 4096; diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c index 6bdb44f7bec..7b0c5b2dd26 100644 --- a/drivers/char/synclinkmp.c +++ b/drivers/char/synclinkmp.c @@ -558,6 +558,7 @@ static void release_resources(SLMP_INFO *info); static int startup(SLMP_INFO *info); static int block_til_ready(struct tty_struct *tty, struct file * filp,SLMP_INFO *info); +static int carrier_raised(struct tty_port *port); static void shutdown(SLMP_INFO *info); static void program_hw(SLMP_INFO *info); static void change_params(SLMP_INFO *info); @@ -800,7 +801,7 @@ cleanup: */ static void close(struct tty_struct *tty, struct file *filp) { - SLMP_INFO * info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO * info = tty->driver_data; if (sanity_check(info, tty->name, "close")) return; @@ -809,70 +810,18 @@ static void close(struct tty_struct *tty, struct file *filp) printk("%s(%d):%s close() entry, count=%d\n", __FILE__,__LINE__, info->device_name, info->port.count); - if (!info->port.count) - return; - - if (tty_hung_up_p(filp)) - goto cleanup; - - if ((tty->count == 1) && (info->port.count != 1)) { - /* - * tty->count is 1 and the tty structure will be freed. - * info->port.count should be one in this case. - * if it's not, correct it so that the port is shutdown. - */ - printk("%s(%d):%s close: bad refcount; tty->count is 1, " - "info->port.count is %d\n", - __FILE__,__LINE__, info->device_name, info->port.count); - info->port.count = 1; - } - - info->port.count--; - - /* if at least one open remaining, leave hardware active */ - if (info->port.count) + if (tty_port_close_start(&info->port, tty, filp) == 0) goto cleanup; - - info->port.flags |= ASYNC_CLOSING; - - /* set tty->closing to notify line discipline to - * only process XON/XOFF characters. Only the N_TTY - * discipline appears to use this (ppp does not). - */ - tty->closing = 1; - - /* wait for transmit data to clear all layers */ - - if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) { - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s close() calling tty_wait_until_sent\n", - __FILE__,__LINE__, info->device_name ); - tty_wait_until_sent(tty, info->port.closing_wait); - } - + if (info->port.flags & ASYNC_INITIALIZED) wait_until_sent(tty, info->timeout); flush_buffer(tty); - tty_ldisc_flush(tty); - shutdown(info); - tty->closing = 0; + tty_port_close_end(&info->port, tty); info->port.tty = NULL; - - if (info->port.blocked_open) { - if (info->port.close_delay) { - msleep_interruptible(jiffies_to_msecs(info->port.close_delay)); - } - wake_up_interruptible(&info->port.open_wait); - } - - info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - - wake_up_interruptible(&info->port.close_wait); - cleanup: if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__, @@ -884,7 +833,7 @@ cleanup: */ static void hangup(struct tty_struct *tty) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):%s hangup()\n", @@ -907,7 +856,7 @@ static void hangup(struct tty_struct *tty) */ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -960,7 +909,7 @@ static int write(struct tty_struct *tty, const unsigned char *buf, int count) { int c, ret = 0; - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -1038,7 +987,7 @@ cleanup: */ static int put_char(struct tty_struct *tty, unsigned char ch) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; int ret = 0; @@ -1075,7 +1024,7 @@ static int put_char(struct tty_struct *tty, unsigned char ch) */ static void send_xchar(struct tty_struct *tty, char ch) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -1099,7 +1048,7 @@ static void send_xchar(struct tty_struct *tty, char ch) */ static void wait_until_sent(struct tty_struct *tty, int timeout) { - SLMP_INFO * info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO * info = tty->driver_data; unsigned long orig_jiffies, char_time; if (!info ) @@ -1166,7 +1115,7 @@ exit: */ static int write_room(struct tty_struct *tty) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; int ret; if (sanity_check(info, tty->name, "write_room")) @@ -1193,7 +1142,7 @@ static int write_room(struct tty_struct *tty) */ static void flush_chars(struct tty_struct *tty) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; if ( debug_level >= DEBUG_LEVEL_INFO ) @@ -1232,7 +1181,7 @@ static void flush_chars(struct tty_struct *tty) */ static void flush_buffer(struct tty_struct *tty) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -1254,7 +1203,7 @@ static void flush_buffer(struct tty_struct *tty) */ static void tx_hold(struct tty_struct *tty) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; if (sanity_check(info, tty->name, "tx_hold")) @@ -1274,7 +1223,7 @@ static void tx_hold(struct tty_struct *tty) */ static void tx_release(struct tty_struct *tty) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; if (sanity_check(info, tty->name, "tx_release")) @@ -1304,7 +1253,7 @@ static void tx_release(struct tty_struct *tty) static int do_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; int error; struct mgsl_icount cnow; /* kernel counter temps */ struct serial_icounter_struct __user *p_cuser; /* user space */ @@ -1515,7 +1464,7 @@ done: */ static int chars_in_buffer(struct tty_struct *tty) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; if (sanity_check(info, tty->name, "chars_in_buffer")) return 0; @@ -1531,7 +1480,7 @@ static int chars_in_buffer(struct tty_struct *tty) */ static void throttle(struct tty_struct * tty) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -1556,7 +1505,7 @@ static void throttle(struct tty_struct * tty) */ static void unthrottle(struct tty_struct * tty) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -1587,7 +1536,7 @@ static void unthrottle(struct tty_struct * tty) static int set_break(struct tty_struct *tty, int break_state) { unsigned char RegValue; - SLMP_INFO * info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO * info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -3269,7 +3218,7 @@ static int modem_input_wait(SLMP_INFO *info,int arg) */ static int tiocmget(struct tty_struct *tty, struct file *file) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned int result; unsigned long flags; @@ -3295,7 +3244,7 @@ static int tiocmget(struct tty_struct *tty, struct file *file) static int tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -3318,7 +3267,28 @@ static int tiocmset(struct tty_struct *tty, struct file *file, return 0; } +static int carrier_raised(struct tty_port *port) +{ + SLMP_INFO *info = container_of(port, SLMP_INFO, port); + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + return (info->serial_signals & SerialSignal_DCD) ? 1 : 0; +} + +static void raise_dtr_rts(struct tty_port *port) +{ + SLMP_INFO *info = container_of(port, SLMP_INFO, port); + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); +} /* Block the current process until the specified port is ready to open. */ @@ -3330,6 +3300,8 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, bool do_clocal = false; bool extra_count = false; unsigned long flags; + int cd; + struct tty_port *port = &info->port; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):%s block_til_ready()\n", @@ -3338,7 +3310,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){ /* nonblock mode is set or port is not enabled */ /* just verify that callout device is not active */ - info->port.flags |= ASYNC_NORMAL_ACTIVE; + port->flags |= ASYNC_NORMAL_ACTIVE; return 0; } @@ -3347,50 +3319,42 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, /* Wait for carrier detect and the line to become * free (i.e., not in use by the callout). While we are in - * this loop, info->port.count is dropped by one, so that + * this loop, port->count is dropped by one, so that * close() knows when to free things. We restore it upon * exit, either normal or abnormal. */ retval = 0; - add_wait_queue(&info->port.open_wait, &wait); + add_wait_queue(&port->open_wait, &wait); if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):%s block_til_ready() before block, count=%d\n", - __FILE__,__LINE__, tty->driver->name, info->port.count ); + __FILE__,__LINE__, tty->driver->name, port->count ); spin_lock_irqsave(&info->lock, flags); if (!tty_hung_up_p(filp)) { extra_count = true; - info->port.count--; + port->count--; } spin_unlock_irqrestore(&info->lock, flags); - info->port.blocked_open++; + port->blocked_open++; while (1) { - if ((tty->termios->c_cflag & CBAUD)) { - spin_lock_irqsave(&info->lock,flags); - info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - } + if (tty->termios->c_cflag & CBAUD) + tty_port_raise_dtr_rts(port); set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || !(info->port.flags & ASYNC_INITIALIZED)){ - retval = (info->port.flags & ASYNC_HUP_NOTIFY) ? + if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){ + retval = (port->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS; break; } - spin_lock_irqsave(&info->lock,flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock,flags); + cd = tty_port_carrier_raised(port); - if (!(info->port.flags & ASYNC_CLOSING) && - (do_clocal || (info->serial_signals & SerialSignal_DCD)) ) { + if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd)) break; - } if (signal_pending(current)) { retval = -ERESTARTSYS; @@ -3399,24 +3363,24 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):%s block_til_ready() count=%d\n", - __FILE__,__LINE__, tty->driver->name, info->port.count ); + __FILE__,__LINE__, tty->driver->name, port->count ); schedule(); } set_current_state(TASK_RUNNING); - remove_wait_queue(&info->port.open_wait, &wait); + remove_wait_queue(&port->open_wait, &wait); if (extra_count) - info->port.count++; - info->port.blocked_open--; + port->count++; + port->blocked_open--; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):%s block_til_ready() after, count=%d\n", - __FILE__,__LINE__, tty->driver->name, info->port.count ); + __FILE__,__LINE__, tty->driver->name, port->count ); if (!retval) - info->port.flags |= ASYNC_NORMAL_ACTIVE; + port->flags |= ASYNC_NORMAL_ACTIVE; return retval; } @@ -3782,6 +3746,11 @@ static void add_device(SLMP_INFO *info) #endif } +static const struct tty_port_operations port_ops = { + .carrier_raised = carrier_raised, + .raise_dtr_rts = raise_dtr_rts, +}; + /* Allocate and initialize a device instance structure * * Return Value: pointer to SLMP_INFO if success, otherwise NULL @@ -3798,6 +3767,7 @@ static SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev) __FILE__,__LINE__, adapter_num, port_num); } else { tty_port_init(&info->port); + info->port.ops = &port_ops; info->magic = MGSL_MAGIC; INIT_WORK(&info->task, bh_handler); info->max_frame_size = 4096; @@ -3940,6 +3910,7 @@ static const struct tty_operations ops = { .tiocmset = tiocmset, }; + static void synclinkmp_cleanup(void) { int rc; diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c index ce0d9da52a8..d41b9f6f790 100644 --- a/drivers/char/sysrq.c +++ b/drivers/char/sysrq.c @@ -82,7 +82,7 @@ static void sysrq_handle_loglevel(int key, struct tty_struct *tty) } static struct sysrq_key_op sysrq_loglevel_op = { .handler = sysrq_handle_loglevel, - .help_msg = "loglevel0-8", + .help_msg = "loglevel(0-9)", .action_msg = "Changing Loglevel", .enable_mask = SYSRQ_ENABLE_LOG, }; @@ -233,7 +233,7 @@ static void sysrq_handle_showallcpus(int key, struct tty_struct *tty) static struct sysrq_key_op sysrq_showallcpus_op = { .handler = sysrq_handle_showallcpus, - .help_msg = "aLlcpus", + .help_msg = "show-backtrace-all-active-cpus(L)", .action_msg = "Show backtrace of all active CPUs", .enable_mask = SYSRQ_ENABLE_DUMP, }; @@ -247,7 +247,7 @@ static void sysrq_handle_showregs(int key, struct tty_struct *tty) } static struct sysrq_key_op sysrq_showregs_op = { .handler = sysrq_handle_showregs, - .help_msg = "showPc", + .help_msg = "show-registers(P)", .action_msg = "Show Regs", .enable_mask = SYSRQ_ENABLE_DUMP, }; @@ -258,7 +258,7 @@ static void sysrq_handle_showstate(int key, struct tty_struct *tty) } static struct sysrq_key_op sysrq_showstate_op = { .handler = sysrq_handle_showstate, - .help_msg = "showTasks", + .help_msg = "show-task-states(T)", .action_msg = "Show State", .enable_mask = SYSRQ_ENABLE_DUMP, }; @@ -269,11 +269,27 @@ static void sysrq_handle_showstate_blocked(int key, struct tty_struct *tty) } static struct sysrq_key_op sysrq_showstate_blocked_op = { .handler = sysrq_handle_showstate_blocked, - .help_msg = "shoW-blocked-tasks", + .help_msg = "show-blocked-tasks(W)", .action_msg = "Show Blocked State", .enable_mask = SYSRQ_ENABLE_DUMP, }; +#ifdef CONFIG_TRACING +#include <linux/ftrace.h> + +static void sysrq_ftrace_dump(int key, struct tty_struct *tty) +{ + ftrace_dump(); +} +static struct sysrq_key_op sysrq_ftrace_dump_op = { + .handler = sysrq_ftrace_dump, + .help_msg = "dumpZ-ftrace-buffer", + .action_msg = "Dump ftrace buffer", + .enable_mask = SYSRQ_ENABLE_DUMP, +}; +#else +#define sysrq_ftrace_dump_op (*(struct sysrq_key_op *)0) +#endif static void sysrq_handle_showmem(int key, struct tty_struct *tty) { @@ -281,7 +297,7 @@ static void sysrq_handle_showmem(int key, struct tty_struct *tty) } static struct sysrq_key_op sysrq_showmem_op = { .handler = sysrq_handle_showmem, - .help_msg = "showMem", + .help_msg = "show-memory-usage(M)", .action_msg = "Show Memory", .enable_mask = SYSRQ_ENABLE_DUMP, }; @@ -307,7 +323,7 @@ static void sysrq_handle_term(int key, struct tty_struct *tty) } static struct sysrq_key_op sysrq_term_op = { .handler = sysrq_handle_term, - .help_msg = "tErm", + .help_msg = "terminate-all-tasks(E)", .action_msg = "Terminate All Tasks", .enable_mask = SYSRQ_ENABLE_SIGNAL, }; @@ -325,7 +341,7 @@ static void sysrq_handle_moom(int key, struct tty_struct *tty) } static struct sysrq_key_op sysrq_moom_op = { .handler = sysrq_handle_moom, - .help_msg = "Full", + .help_msg = "memory-full-oom-kill(F)", .action_msg = "Manual OOM execution", .enable_mask = SYSRQ_ENABLE_SIGNAL, }; @@ -337,7 +353,7 @@ static void sysrq_handle_kill(int key, struct tty_struct *tty) } static struct sysrq_key_op sysrq_kill_op = { .handler = sysrq_handle_kill, - .help_msg = "kIll", + .help_msg = "kill-all-tasks(I)", .action_msg = "Kill All Tasks", .enable_mask = SYSRQ_ENABLE_SIGNAL, }; @@ -348,7 +364,7 @@ static void sysrq_handle_unrt(int key, struct tty_struct *tty) } static struct sysrq_key_op sysrq_unrt_op = { .handler = sysrq_handle_unrt, - .help_msg = "Nice", + .help_msg = "nice-all-RT-tasks(N)", .action_msg = "Nice All RT Tasks", .enable_mask = SYSRQ_ENABLE_RTNICE, }; @@ -406,7 +422,7 @@ static struct sysrq_key_op *sysrq_key_table[36] = { NULL, /* x */ /* y: May be registered on sparc64 for global register dump */ NULL, /* y */ - NULL /* z */ + &sysrq_ftrace_dump_op, /* z */ }; /* key2index calculation, -1 on invalid index */ diff --git a/drivers/char/tpm/tpm_bios.c b/drivers/char/tpm/tpm_bios.c index 68f052b42ed..ed306eb1057 100644 --- a/drivers/char/tpm/tpm_bios.c +++ b/drivers/char/tpm/tpm_bios.c @@ -23,8 +23,6 @@ #include <linux/security.h> #include <linux/module.h> #include <acpi/acpi.h> -#include <acpi/actypes.h> -#include <acpi/actbl.h> #include "tpm.h" #define TCG_EVENT_NAME_LEN_MAX 255 diff --git a/drivers/char/tpm/tpm_nsc.c b/drivers/char/tpm/tpm_nsc.c index ab18c1e7b11..70efba2ee05 100644 --- a/drivers/char/tpm/tpm_nsc.c +++ b/drivers/char/tpm/tpm_nsc.c @@ -273,12 +273,23 @@ static void tpm_nsc_remove(struct device *dev) } } -static struct device_driver nsc_drv = { - .name = "tpm_nsc", - .bus = &platform_bus_type, - .owner = THIS_MODULE, - .suspend = tpm_pm_suspend, - .resume = tpm_pm_resume, +static int tpm_nsc_suspend(struct platform_device *dev, pm_message_t msg) +{ + return tpm_pm_suspend(&dev->dev, msg); +} + +static int tpm_nsc_resume(struct platform_device *dev) +{ + return tpm_pm_resume(&dev->dev); +} + +static struct platform_driver nsc_drv = { + .suspend = tpm_nsc_suspend, + .resume = tpm_nsc_resume, + .driver = { + .name = "tpm_nsc", + .owner = THIS_MODULE, + }, }; static int __init init_nsc(void) @@ -297,7 +308,7 @@ static int __init init_nsc(void) return -ENODEV; } - err = driver_register(&nsc_drv); + err = platform_driver_register(&nsc_drv); if (err) return err; @@ -308,17 +319,15 @@ static int __init init_nsc(void) /* enable the DPM module */ tpm_write_index(nscAddrBase, NSC_LDC_INDEX, 0x01); - pdev = kzalloc(sizeof(struct platform_device), GFP_KERNEL); + pdev = platform_device_alloc("tpm_nscl0", -1); if (!pdev) { rc = -ENOMEM; goto err_unreg_drv; } - pdev->name = "tpm_nscl0"; - pdev->id = -1; pdev->num_resources = 0; + pdev->dev.driver = &nsc_drv.driver; pdev->dev.release = tpm_nsc_remove; - pdev->dev.driver = &nsc_drv; if ((rc = platform_device_register(pdev)) < 0) goto err_free_dev; @@ -377,7 +386,7 @@ err_unreg_dev: err_free_dev: kfree(pdev); err_unreg_drv: - driver_unregister(&nsc_drv); + platform_driver_unregister(&nsc_drv); return rc; } @@ -390,7 +399,7 @@ static void __exit cleanup_nsc(void) pdev = NULL; } - driver_unregister(&nsc_drv); + platform_driver_unregister(&nsc_drv); } module_init(init_nsc); diff --git a/drivers/char/tty_audit.c b/drivers/char/tty_audit.c index 5787249934c..34ab6d798f8 100644 --- a/drivers/char/tty_audit.c +++ b/drivers/char/tty_audit.c @@ -67,6 +67,29 @@ static void tty_audit_buf_put(struct tty_audit_buf *buf) tty_audit_buf_free(buf); } +static void tty_audit_log(const char *description, struct task_struct *tsk, + uid_t loginuid, unsigned sessionid, int major, + int minor, unsigned char *data, size_t size) +{ + struct audit_buffer *ab; + + ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_TTY); + if (ab) { + char name[sizeof(tsk->comm)]; + uid_t uid = task_uid(tsk); + + audit_log_format(ab, "%s pid=%u uid=%u auid=%u ses=%u " + "major=%d minor=%d comm=", description, + tsk->pid, uid, loginuid, sessionid, + major, minor); + get_task_comm(name, tsk); + audit_log_untrustedstring(ab, name); + audit_log_format(ab, " data="); + audit_log_n_hex(ab, data, size); + audit_log_end(ab); + } +} + /** * tty_audit_buf_push - Push buffered data out * @@ -77,25 +100,12 @@ static void tty_audit_buf_push(struct task_struct *tsk, uid_t loginuid, unsigned int sessionid, struct tty_audit_buf *buf) { - struct audit_buffer *ab; - if (buf->valid == 0) return; if (audit_enabled == 0) return; - ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_TTY); - if (ab) { - char name[sizeof(tsk->comm)]; - - audit_log_format(ab, "tty pid=%u uid=%u auid=%u ses=%u " - "major=%d minor=%d comm=", tsk->pid, tsk->uid, - loginuid, sessionid, buf->major, buf->minor); - get_task_comm(name, tsk); - audit_log_untrustedstring(ab, name); - audit_log_format(ab, " data="); - audit_log_n_hex(ab, buf->data, buf->valid); - audit_log_end(ab); - } + tty_audit_log("tty", tsk, loginuid, sessionid, buf->major, buf->minor, + buf->data, buf->valid); buf->valid = 0; } @@ -150,6 +160,42 @@ void tty_audit_fork(struct signal_struct *sig) } /** + * tty_audit_tiocsti - Log TIOCSTI + */ +void tty_audit_tiocsti(struct tty_struct *tty, char ch) +{ + struct tty_audit_buf *buf; + int major, minor, should_audit; + + spin_lock_irq(¤t->sighand->siglock); + should_audit = current->signal->audit_tty; + buf = current->signal->tty_audit_buf; + if (buf) + atomic_inc(&buf->count); + spin_unlock_irq(¤t->sighand->siglock); + + major = tty->driver->major; + minor = tty->driver->minor_start + tty->index; + if (buf) { + mutex_lock(&buf->mutex); + if (buf->major == major && buf->minor == minor) + tty_audit_buf_push_current(buf); + mutex_unlock(&buf->mutex); + tty_audit_buf_put(buf); + } + + if (should_audit && audit_enabled) { + uid_t auid; + unsigned int sessionid; + + auid = audit_get_loginuid(current); + sessionid = audit_get_sessionid(current); + tty_audit_log("ioctl=TIOCSTI", current, auid, sessionid, major, + minor, &ch, 1); + } +} + +/** * tty_audit_push_task - Flush task's pending audit data */ void tty_audit_push_task(struct task_struct *tsk, uid_t loginuid, u32 sessionid) diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index 1412a8d1e58..d33e5ab0617 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -1111,9 +1111,7 @@ void tty_write_message(struct tty_struct *tty, char *msg) * Locks the line discipline as required * Writes to the tty driver are serialized by the atomic_write_lock * and are then processed in chunks to the device. The line discipline - * write method will not be involked in parallel for each device - * The line discipline write method is called under the big - * kernel lock for historical reasons. New code should not rely on this. + * write method will not be invoked in parallel for each device. */ static ssize_t tty_write(struct file *file, const char __user *buf, @@ -1213,7 +1211,7 @@ static void tty_line_name(struct tty_driver *driver, int index, char *p) * be held until the 'fast-open' is also done. Will change once we * have refcounting in the driver and per driver locking */ -struct tty_struct *tty_driver_lookup_tty(struct tty_driver *driver, +static struct tty_struct *tty_driver_lookup_tty(struct tty_driver *driver, struct inode *inode, int idx) { struct tty_struct *tty; @@ -2018,6 +2016,7 @@ static int tiocsti(struct tty_struct *tty, char __user *p) return -EPERM; if (get_user(ch, p)) return -EFAULT; + tty_audit_tiocsti(tty, ch); ld = tty_ldisc_ref_wait(tty); ld->ops->receive_buf(tty, &ch, &mbz, 1); tty_ldisc_deref(ld); @@ -2049,7 +2048,6 @@ static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg) /** * tty_do_resize - resize event * @tty: tty being resized - * @real_tty: real tty (not the same as tty if using a pty/tty pair) * @rows: rows (character) * @cols: cols (character) * @@ -2057,41 +2055,34 @@ static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg) * peform a terminal resize correctly */ -int tty_do_resize(struct tty_struct *tty, struct tty_struct *real_tty, - struct winsize *ws) +int tty_do_resize(struct tty_struct *tty, struct winsize *ws) { - struct pid *pgrp, *rpgrp; + struct pid *pgrp; unsigned long flags; - /* For a PTY we need to lock the tty side */ - mutex_lock(&real_tty->termios_mutex); - if (!memcmp(ws, &real_tty->winsize, sizeof(*ws))) + /* Lock the tty */ + mutex_lock(&tty->termios_mutex); + if (!memcmp(ws, &tty->winsize, sizeof(*ws))) goto done; /* Get the PID values and reference them so we can avoid holding the tty ctrl lock while sending signals */ spin_lock_irqsave(&tty->ctrl_lock, flags); pgrp = get_pid(tty->pgrp); - rpgrp = get_pid(real_tty->pgrp); spin_unlock_irqrestore(&tty->ctrl_lock, flags); if (pgrp) kill_pgrp(pgrp, SIGWINCH, 1); - if (rpgrp != pgrp && rpgrp) - kill_pgrp(rpgrp, SIGWINCH, 1); - put_pid(pgrp); - put_pid(rpgrp); tty->winsize = *ws; - real_tty->winsize = *ws; done: - mutex_unlock(&real_tty->termios_mutex); + mutex_unlock(&tty->termios_mutex); return 0; } /** * tiocswinsz - implement window size set ioctl - * @tty; tty + * @tty; tty side of tty * @arg: user buffer for result * * Copies the user idea of the window size to the kernel. Traditionally @@ -2104,17 +2095,16 @@ done: * then calls into the default method. */ -static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty, - struct winsize __user *arg) +static int tiocswinsz(struct tty_struct *tty, struct winsize __user *arg) { struct winsize tmp_ws; if (copy_from_user(&tmp_ws, arg, sizeof(*arg))) return -EFAULT; if (tty->ops->resize) - return tty->ops->resize(tty, real_tty, &tmp_ws); + return tty->ops->resize(tty, &tmp_ws); else - return tty_do_resize(tty, real_tty, &tmp_ws); + return tty_do_resize(tty, &tmp_ws); } /** @@ -2539,7 +2529,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case TIOCGWINSZ: return tiocgwinsz(real_tty, p); case TIOCSWINSZ: - return tiocswinsz(tty, real_tty, p); + return tiocswinsz(real_tty, p); case TIOCCONS: return real_tty != tty ? -EINVAL : tioccons(file); case FIONBIO: @@ -2784,6 +2774,8 @@ void initialize_tty_struct(struct tty_struct *tty, INIT_WORK(&tty->hangup_work, do_tty_hangup); mutex_init(&tty->atomic_read_lock); mutex_init(&tty->atomic_write_lock); + mutex_init(&tty->output_lock); + mutex_init(&tty->echo_lock); spin_lock_init(&tty->read_lock); spin_lock_init(&tty->ctrl_lock); INIT_LIST_HEAD(&tty->tty_files); diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c index f307f135cbf..7a84b406a95 100644 --- a/drivers/char/tty_ldisc.c +++ b/drivers/char/tty_ldisc.c @@ -316,8 +316,7 @@ struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty) { /* wait_event is a macro */ wait_event(tty_ldisc_wait, tty_ldisc_try(tty)); - if (tty->ldisc.refcount == 0) - printk(KERN_ERR "tty_ldisc_ref_wait\n"); + WARN_ON(tty->ldisc.refcount == 0); return &tty->ldisc; } @@ -376,15 +375,17 @@ EXPORT_SYMBOL_GPL(tty_ldisc_deref); * @tty: terminal to activate ldisc on * * Set the TTY_LDISC flag when the line discipline can be called - * again. Do necessary wakeups for existing sleepers. + * again. Do necessary wakeups for existing sleepers. Clear the LDISC + * changing flag to indicate any ldisc change is now over. * - * Note: nobody should set this bit except via this function. Clearing - * directly is allowed. + * Note: nobody should set the TTY_LDISC bit except via this function. + * Clearing directly is allowed. */ void tty_ldisc_enable(struct tty_struct *tty) { set_bit(TTY_LDISC, &tty->flags); + clear_bit(TTY_LDISC_CHANGING, &tty->flags); wake_up(&tty_ldisc_wait); } @@ -496,7 +497,14 @@ restart: * reference to the line discipline. The TTY_LDISC bit * prevents anyone taking a reference once it is clear. * We need the lock to avoid racing reference takers. + * + * We must clear the TTY_LDISC bit here to avoid a livelock + * with a userspace app continually trying to use the tty in + * parallel to the change and re-referencing the tty. */ + clear_bit(TTY_LDISC, &tty->flags); + if (o_tty) + clear_bit(TTY_LDISC, &o_tty->flags); spin_lock_irqsave(&tty_ldisc_lock, flags); if (tty->ldisc.refcount || (o_tty && o_tty->ldisc.refcount)) { @@ -528,7 +536,7 @@ restart: * If the TTY_LDISC bit is set, then we are racing against * another ldisc change */ - if (!test_bit(TTY_LDISC, &tty->flags)) { + if (test_bit(TTY_LDISC_CHANGING, &tty->flags)) { struct tty_ldisc *ld; spin_unlock_irqrestore(&tty_ldisc_lock, flags); tty_ldisc_put(new_ldisc.ops); @@ -536,10 +544,14 @@ restart: tty_ldisc_deref(ld); goto restart; } - - clear_bit(TTY_LDISC, &tty->flags); + /* + * This flag is used to avoid two parallel ldisc changes. Once + * open and close are fine grained locked this may work better + * as a mutex shared with the open/close/hup paths + */ + set_bit(TTY_LDISC_CHANGING, &tty->flags); if (o_tty) - clear_bit(TTY_LDISC, &o_tty->flags); + set_bit(TTY_LDISC_CHANGING, &o_tty->flags); spin_unlock_irqrestore(&tty_ldisc_lock, flags); /* diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c index c8f8024cb40..9b8004c7268 100644 --- a/drivers/char/tty_port.c +++ b/drivers/char/tty_port.c @@ -7,6 +7,7 @@ #include <linux/tty.h> #include <linux/tty_driver.h> #include <linux/tty_flip.h> +#include <linux/serial.h> #include <linux/timer.h> #include <linux/string.h> #include <linux/slab.h> @@ -94,3 +95,227 @@ void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty) spin_unlock_irqrestore(&port->lock, flags); } EXPORT_SYMBOL(tty_port_tty_set); + +/** + * tty_port_hangup - hangup helper + * @port: tty port + * + * Perform port level tty hangup flag and count changes. Drop the tty + * reference. + */ + +void tty_port_hangup(struct tty_port *port) +{ + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + port->count = 0; + port->flags &= ~ASYNC_NORMAL_ACTIVE; + if (port->tty) + tty_kref_put(port->tty); + port->tty = NULL; + spin_unlock_irqrestore(&port->lock, flags); + wake_up_interruptible(&port->open_wait); +} +EXPORT_SYMBOL(tty_port_hangup); + +/** + * tty_port_carrier_raised - carrier raised check + * @port: tty port + * + * Wrapper for the carrier detect logic. For the moment this is used + * to hide some internal details. This will eventually become entirely + * internal to the tty port. + */ + +int tty_port_carrier_raised(struct tty_port *port) +{ + if (port->ops->carrier_raised == NULL) + return 1; + return port->ops->carrier_raised(port); +} +EXPORT_SYMBOL(tty_port_carrier_raised); + +/** + * tty_port_raise_dtr_rts - Riase DTR/RTS + * @port: tty port + * + * Wrapper for the DTR/RTS raise logic. For the moment this is used + * to hide some internal details. This will eventually become entirely + * internal to the tty port. + */ + +void tty_port_raise_dtr_rts(struct tty_port *port) +{ + if (port->ops->raise_dtr_rts) + port->ops->raise_dtr_rts(port); +} +EXPORT_SYMBOL(tty_port_raise_dtr_rts); + +/** + * tty_port_block_til_ready - Waiting logic for tty open + * @port: the tty port being opened + * @tty: the tty device being bound + * @filp: the file pointer of the opener + * + * Implement the core POSIX/SuS tty behaviour when opening a tty device. + * Handles: + * - hangup (both before and during) + * - non blocking open + * - rts/dtr/dcd + * - signals + * - port flags and counts + * + * The passed tty_port must implement the carrier_raised method if it can + * do carrier detect and the raise_dtr_rts method if it supports software + * management of these lines. Note that the dtr/rts raise is done each + * iteration as a hangup may have previously dropped them while we wait. + */ + +int tty_port_block_til_ready(struct tty_port *port, + struct tty_struct *tty, struct file *filp) +{ + int do_clocal = 0, retval; + unsigned long flags; + DECLARE_WAITQUEUE(wait, current); + int cd; + + /* block if port is in the process of being closed */ + if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) { + interruptible_sleep_on(&port->close_wait); + if (port->flags & ASYNC_HUP_NOTIFY) + return -EAGAIN; + else + return -ERESTARTSYS; + } + + /* if non-blocking mode is set we can pass directly to open unless + the port has just hung up or is in another error state */ + if ((filp->f_flags & O_NONBLOCK) || + (tty->flags & (1 << TTY_IO_ERROR))) { + port->flags |= ASYNC_NORMAL_ACTIVE; + return 0; + } + + if (C_CLOCAL(tty)) + do_clocal = 1; + + /* Block waiting until we can proceed. We may need to wait for the + carrier, but we must also wait for any close that is in progress + before the next open may complete */ + + retval = 0; + add_wait_queue(&port->open_wait, &wait); + + /* The port lock protects the port counts */ + spin_lock_irqsave(&port->lock, flags); + if (!tty_hung_up_p(filp)) + port->count--; + port->blocked_open++; + spin_unlock_irqrestore(&port->lock, flags); + + while (1) { + /* Indicate we are open */ + if (tty->termios->c_cflag & CBAUD) + tty_port_raise_dtr_rts(port); + + set_current_state(TASK_INTERRUPTIBLE); + /* Check for a hangup or uninitialised port. Return accordingly */ + if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) { + if (port->flags & ASYNC_HUP_NOTIFY) + retval = -EAGAIN; + else + retval = -ERESTARTSYS; + break; + } + /* Probe the carrier. For devices with no carrier detect this + will always return true */ + cd = tty_port_carrier_raised(port); + if (!(port->flags & ASYNC_CLOSING) && + (do_clocal || cd)) + break; + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + schedule(); + } + set_current_state(TASK_RUNNING); + remove_wait_queue(&port->open_wait, &wait); + + /* Update counts. A parallel hangup will have set count to zero and + we must not mess that up further */ + spin_lock_irqsave(&port->lock, flags); + if (!tty_hung_up_p(filp)) + port->count++; + port->blocked_open--; + if (retval == 0) + port->flags |= ASYNC_NORMAL_ACTIVE; + spin_unlock_irqrestore(&port->lock, flags); + return 0; + +} +EXPORT_SYMBOL(tty_port_block_til_ready); + +int tty_port_close_start(struct tty_port *port, struct tty_struct *tty, struct file *filp) +{ + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + if (tty_hung_up_p(filp)) { + spin_unlock_irqrestore(&port->lock, flags); + return 0; + } + + if( tty->count == 1 && port->count != 1) { + printk(KERN_WARNING + "tty_port_close_start: tty->count = 1 port count = %d.\n", + port->count); + port->count = 1; + } + if (--port->count < 0) { + printk(KERN_WARNING "tty_port_close_start: count = %d\n", + port->count); + port->count = 0; + } + + if (port->count) { + spin_unlock_irqrestore(&port->lock, flags); + return 0; + } + port->flags |= ASYNC_CLOSING; + tty->closing = 1; + spin_unlock_irqrestore(&port->lock, flags); + /* Don't block on a stalled port, just pull the chain */ + if (tty->flow_stopped) + tty_driver_flush_buffer(tty); + if (port->flags & ASYNC_INITIALIZED && + port->closing_wait != ASYNC_CLOSING_WAIT_NONE) + tty_wait_until_sent(tty, port->closing_wait); + return 1; +} +EXPORT_SYMBOL(tty_port_close_start); + +void tty_port_close_end(struct tty_port *port, struct tty_struct *tty) +{ + unsigned long flags; + + tty_ldisc_flush(tty); + + spin_lock_irqsave(&port->lock, flags); + tty->closing = 0; + + if (port->blocked_open) { + spin_unlock_irqrestore(&port->lock, flags); + if (port->close_delay) { + msleep_interruptible( + jiffies_to_msecs(port->close_delay)); + } + spin_lock_irqsave(&port->lock, flags); + wake_up_interruptible(&port->open_wait); + } + port->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING); + wake_up_interruptible(&port->close_wait); + spin_unlock_irqrestore(&port->lock, flags); +} +EXPORT_SYMBOL(tty_port_close_end); diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index 3fb0d2c88ba..ff6f5a4b58f 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -138,12 +138,33 @@ int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int)) } /* + * virtio console configuration. This supports: + * - console resize + */ +static void virtcons_apply_config(struct virtio_device *dev) +{ + struct winsize ws; + + if (virtio_has_feature(dev, VIRTIO_CONSOLE_F_SIZE)) { + dev->config->get(dev, + offsetof(struct virtio_console_config, cols), + &ws.ws_col, sizeof(u16)); + dev->config->get(dev, + offsetof(struct virtio_console_config, rows), + &ws.ws_row, sizeof(u16)); + hvc_resize(hvc, ws); + } +} + +/* * we support only one console, the hvc struct is a global var - * There is no need to do anything + * We set the configuration at this point, since we now have a tty */ static int notifier_add_vio(struct hvc_struct *hp, int data) { hp->irq_requested = 1; + virtcons_apply_config(vdev); + return 0; } @@ -234,11 +255,18 @@ static struct virtio_device_id id_table[] = { { 0 }, }; +static unsigned int features[] = { + VIRTIO_CONSOLE_F_SIZE, +}; + static struct virtio_driver virtio_console = { + .feature_table = features, + .feature_table_size = ARRAY_SIZE(features), .driver.name = KBUILD_MODNAME, .driver.owner = THIS_MODULE, .id_table = id_table, .probe = virtcons_probe, + .config_changed = virtcons_apply_config, }; static int __init init(void) diff --git a/drivers/char/vme_scc.c b/drivers/char/vme_scc.c index 1718b3c481d..0e8234bd0e1 100644 --- a/drivers/char/vme_scc.c +++ b/drivers/char/vme_scc.c @@ -69,7 +69,7 @@ static void scc_disable_tx_interrupts(void * ptr); static void scc_enable_tx_interrupts(void * ptr); static void scc_disable_rx_interrupts(void * ptr); static void scc_enable_rx_interrupts(void * ptr); -static int scc_get_CD(void * ptr); +static int scc_carrier_raised(struct tty_port *port); static void scc_shutdown_port(void * ptr); static int scc_set_real_termios(void *ptr); static void scc_hungup(void *ptr); @@ -100,7 +100,6 @@ static struct real_driver scc_real_driver = { scc_enable_tx_interrupts, scc_disable_rx_interrupts, scc_enable_rx_interrupts, - scc_get_CD, scc_shutdown_port, scc_set_real_termios, scc_chars_in_buffer, @@ -129,6 +128,10 @@ static const struct tty_operations scc_ops = { .break_ctl = scc_break_ctl, }; +static const struct tty_port_operations scc_port_ops = { + .carrier_raised = scc_carrier_raised, +}; + /*---------------------------------------------------------------------------- * vme_scc_init() and support functions *---------------------------------------------------------------------------*/ @@ -176,6 +179,8 @@ static void scc_init_portstructs(void) for (i = 0; i < 2; i++) { port = scc_ports + i; + tty_port_init(&port->gs.port); + port->gs.port.ops = &scc_port_ops; port->gs.magic = SCC_MAGIC; port->gs.close_delay = HZ/2; port->gs.closing_wait = 30 * HZ; @@ -624,10 +629,10 @@ static void scc_enable_rx_interrupts(void *ptr) } -static int scc_get_CD(void *ptr) +static int scc_carrier_raised(struct tty_port *port) { - struct scc_port *port = ptr; - unsigned channel = port->channel; + struct scc_port *sc = container_of(port, struct scc_port, gs.port); + unsigned channel = sc->channel; return !!(scc_last_status_reg[channel] & SR_DCD); } @@ -638,7 +643,7 @@ static void scc_shutdown_port(void *ptr) struct scc_port *port = ptr; port->gs.port.flags &= ~ GS_ACTIVE; - if (port->gs.port.tty && port->gs.port.tty->termios->c_cflag & HUPCL) { + if (port->gs.port.tty && (port->gs.port.tty->termios->c_cflag & HUPCL)) { scc_setsignals (port, 0, 0); } } @@ -779,7 +784,7 @@ static void scc_setsignals(struct scc_port *port, int dtr, int rts) static void scc_send_xchar(struct tty_struct *tty, char ch) { - struct scc_port *port = (struct scc_port *)tty->driver_data; + struct scc_port *port = tty->driver_data; port->x_char = ch; if (ch) @@ -896,7 +901,7 @@ static int scc_open (struct tty_struct * tty, struct file * filp) return retval; } - port->c_dcd = scc_get_CD (port); + port->c_dcd = tty_port_carrier_raised(&port->gs.port); scc_enable_rx_interrupts(port); @@ -906,7 +911,7 @@ static int scc_open (struct tty_struct * tty, struct file * filp) static void scc_throttle (struct tty_struct * tty) { - struct scc_port *port = (struct scc_port *)tty->driver_data; + struct scc_port *port = tty->driver_data; unsigned long flags; SCC_ACCESS_INIT(port); @@ -922,7 +927,7 @@ static void scc_throttle (struct tty_struct * tty) static void scc_unthrottle (struct tty_struct * tty) { - struct scc_port *port = (struct scc_port *)tty->driver_data; + struct scc_port *port = tty->driver_data; unsigned long flags; SCC_ACCESS_INIT(port); @@ -945,7 +950,7 @@ static int scc_ioctl(struct tty_struct *tty, struct file *file, static int scc_break_ctl(struct tty_struct *tty, int break_state) { - struct scc_port *port = (struct scc_port *)tty->driver_data; + struct scc_port *port = tty->driver_data; unsigned long flags; SCC_ACCESS_INIT(port); diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 008176edbd6..7900bd63b36 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -819,8 +819,8 @@ static inline int resize_screen(struct vc_data *vc, int width, int height, * ctrl_lock of the tty IFF a tty is passed. */ -static int vc_do_resize(struct tty_struct *tty, struct tty_struct *real_tty, - struct vc_data *vc, unsigned int cols, unsigned int lines) +static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc, + unsigned int cols, unsigned int lines) { unsigned long old_origin, new_origin, new_scr_end, rlth, rrem, err = 0; unsigned int old_cols, old_rows, old_row_size, old_screen_size; @@ -932,7 +932,7 @@ static int vc_do_resize(struct tty_struct *tty, struct tty_struct *real_tty, ws.ws_row = vc->vc_rows; ws.ws_col = vc->vc_cols; ws.ws_ypixel = vc->vc_scan_lines; - tty_do_resize(tty, real_tty, &ws); + tty_do_resize(tty, &ws); } if (CON_IS_VISIBLE(vc)) @@ -954,13 +954,12 @@ static int vc_do_resize(struct tty_struct *tty, struct tty_struct *real_tty, int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int rows) { - return vc_do_resize(vc->vc_tty, vc->vc_tty, vc, cols, rows); + return vc_do_resize(vc->vc_tty, vc, cols, rows); } /** * vt_resize - resize a VT * @tty: tty to resize - * @real_tty: tty if a pty/tty pair * @ws: winsize attributes * * Resize a virtual terminal. This is called by the tty layer as we @@ -970,15 +969,13 @@ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int rows) * Takes the console sem and the called methods then take the tty * termios_mutex and the tty ctrl_lock in that order. */ - -int vt_resize(struct tty_struct *tty, struct tty_struct *real_tty, - struct winsize *ws) +static int vt_resize(struct tty_struct *tty, struct winsize *ws) { struct vc_data *vc = tty->driver_data; int ret; acquire_console_sem(); - ret = vc_do_resize(tty, real_tty, vc, ws->ws_col, ws->ws_row); + ret = vc_do_resize(tty, vc, ws->ws_col, ws->ws_row); release_console_sem(); return ret; } @@ -2679,7 +2676,7 @@ static int con_write_room(struct tty_struct *tty) { if (tty->stopped) return 0; - return 4096; /* No limit, really; we're not buffering */ + return 32768; /* No limit, really; we're not buffering */ } static int con_chars_in_buffer(struct tty_struct *tty) diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c index 8944ce508e2..a2dee0eb6da 100644 --- a/drivers/char/vt_ioctl.c +++ b/drivers/char/vt_ioctl.c @@ -366,7 +366,7 @@ do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud, int perm, struct vc_ int vt_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg) { - struct vc_data *vc = (struct vc_data *)tty->driver_data; + struct vc_data *vc = tty->driver_data; struct console_font_op op; /* used in multiple places here */ struct kbd_struct * kbd; unsigned int console; |