diff options
Diffstat (limited to 'drivers/char')
| -rw-r--r-- | drivers/char/agp/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/char/agp/Makefile | 1 | ||||
| -rw-r--r-- | drivers/char/agp/parisc-agp.c | 416 | ||||
| -rw-r--r-- | drivers/char/amiserial.c | 30 | ||||
| -rw-r--r-- | drivers/char/cyclades.c | 28 | ||||
| -rw-r--r-- | drivers/char/epca.c | 17 | ||||
| -rw-r--r-- | drivers/char/epca.h | 1 | ||||
| -rw-r--r-- | drivers/char/generic_serial.c | 19 | ||||
| -rw-r--r-- | drivers/char/hvc_iseries.c | 8 | ||||
| -rw-r--r-- | drivers/char/hvc_vio.c | 4 | ||||
| -rw-r--r-- | drivers/char/riscom8.c | 10 | ||||
| -rw-r--r-- | drivers/char/serial167.c | 22 |
12 files changed, 444 insertions, 122 deletions
diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig index 22f8cf218cc..c603bf29158 100644 --- a/drivers/char/agp/Kconfig +++ b/drivers/char/agp/Kconfig @@ -1,6 +1,6 @@ config AGP tristate "/dev/agpgart (AGP Support)" - depends on ALPHA || IA64 || PPC || X86 + depends on ALPHA || IA64 || PARISC || PPC || X86 depends on PCI ---help--- AGP (Accelerated Graphics Port) is a bus system mainly used to @@ -122,6 +122,14 @@ config AGP_HP_ZX1 This option gives you AGP GART support for the HP ZX1 chipset for IA64 processors. +config AGP_PARISC + tristate "HP Quicksilver AGP support" + depends on AGP && PARISC && 64BIT + help + This option gives you AGP GART support for the HP Quicksilver + AGP bus adapter on HP PA-RISC machines (Ok, just on the C8000 + workstation...) + config AGP_ALPHA_CORE tristate "Alpha AGP support" depends on AGP && (ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL) diff --git a/drivers/char/agp/Makefile b/drivers/char/agp/Makefile index d33a22f2fa0..3e581603d0a 100644 --- a/drivers/char/agp/Makefile +++ b/drivers/char/agp/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_AGP_AMD64) += amd64-agp.o obj-$(CONFIG_AGP_ALPHA_CORE) += alpha-agp.o obj-$(CONFIG_AGP_EFFICEON) += efficeon-agp.o obj-$(CONFIG_AGP_HP_ZX1) += hp-agp.o +obj-$(CONFIG_AGP_PARISC) += parisc-agp.o obj-$(CONFIG_AGP_I460) += i460-agp.o obj-$(CONFIG_AGP_INTEL) += intel-agp.o obj-$(CONFIG_AGP_NVIDIA) += nvidia-agp.o diff --git a/drivers/char/agp/parisc-agp.c b/drivers/char/agp/parisc-agp.c new file mode 100644 index 00000000000..17c50b0f83f --- /dev/null +++ b/drivers/char/agp/parisc-agp.c @@ -0,0 +1,416 @@ +/* + * HP Quicksilver AGP GART routines + * + * Copyright (c) 2006, Kyle McMartin <kyle@parisc-linux.org> + * + * Based on drivers/char/agpgart/hp-agp.c which is + * (c) Copyright 2002, 2003 Hewlett-Packard Development Company, L.P. + * Bjorn Helgaas <bjorn.helgaas@hp.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/klist.h> +#include <linux/agp_backend.h> + +#include <asm-parisc/parisc-device.h> +#include <asm-parisc/ropes.h> + +#include "agp.h" + +#define DRVNAME "quicksilver" +#define DRVPFX DRVNAME ": " + +#ifndef log2 +#define log2(x) ffz(~(x)) +#endif + +#define AGP8X_MODE_BIT 3 +#define AGP8X_MODE (1 << AGP8X_MODE_BIT) + +static struct _parisc_agp_info { + void __iomem *ioc_regs; + void __iomem *lba_regs; + + int lba_cap_offset; + + u64 *gatt; + u64 gatt_entries; + + u64 gart_base; + u64 gart_size; + + int io_page_size; + int io_pages_per_kpage; +} parisc_agp_info; + +static struct gatt_mask parisc_agp_masks[] = +{ + { + .mask = SBA_PDIR_VALID_BIT, + .type = 0 + } +}; + +static struct aper_size_info_fixed parisc_agp_sizes[] = +{ + {0, 0, 0}, /* filled in by parisc_agp_fetch_size() */ +}; + +static int +parisc_agp_fetch_size(void) +{ + int size; + + size = parisc_agp_info.gart_size / MB(1); + parisc_agp_sizes[0].size = size; + agp_bridge->current_size = (void *) &parisc_agp_sizes[0]; + + return size; +} + +static int +parisc_agp_configure(void) +{ + struct _parisc_agp_info *info = &parisc_agp_info; + + agp_bridge->gart_bus_addr = info->gart_base; + agp_bridge->capndx = info->lba_cap_offset; + agp_bridge->mode = readl(info->lba_regs+info->lba_cap_offset+PCI_AGP_STATUS); + + return 0; +} + +static void +parisc_agp_tlbflush(struct agp_memory *mem) +{ + struct _parisc_agp_info *info = &parisc_agp_info; + + writeq(info->gart_base | log2(info->gart_size), info->ioc_regs+IOC_PCOM); + readq(info->ioc_regs+IOC_PCOM); /* flush */ +} + +static int +parisc_agp_create_gatt_table(struct agp_bridge_data *bridge) +{ + struct _parisc_agp_info *info = &parisc_agp_info; + int i; + + for (i = 0; i < info->gatt_entries; i++) { + info->gatt[i] = (unsigned long)agp_bridge->scratch_page; + } + + return 0; +} + +static int +parisc_agp_free_gatt_table(struct agp_bridge_data *bridge) +{ + struct _parisc_agp_info *info = &parisc_agp_info; + + info->gatt[0] = SBA_AGPGART_COOKIE; + + return 0; +} + +static int +parisc_agp_insert_memory(struct agp_memory *mem, off_t pg_start, int type) +{ + struct _parisc_agp_info *info = &parisc_agp_info; + int i, k; + off_t j, io_pg_start; + int io_pg_count; + + if (type != 0 || mem->type != 0) { + return -EINVAL; + } + + io_pg_start = info->io_pages_per_kpage * pg_start; + io_pg_count = info->io_pages_per_kpage * mem->page_count; + if ((io_pg_start + io_pg_count) > info->gatt_entries) { + return -EINVAL; + } + + j = io_pg_start; + while (j < (io_pg_start + io_pg_count)) { + if (info->gatt[j]) + return -EBUSY; + j++; + } + + if (mem->is_flushed == FALSE) { + global_cache_flush(); + mem->is_flushed = TRUE; + } + + for (i = 0, j = io_pg_start; i < mem->page_count; i++) { + unsigned long paddr; + + paddr = mem->memory[i]; + for (k = 0; + k < info->io_pages_per_kpage; + k++, j++, paddr += info->io_page_size) { + info->gatt[j] = + agp_bridge->driver->mask_memory(agp_bridge, + paddr, type); + } + } + + agp_bridge->driver->tlb_flush(mem); + + return 0; +} + +static int +parisc_agp_remove_memory(struct agp_memory *mem, off_t pg_start, int type) +{ + struct _parisc_agp_info *info = &parisc_agp_info; + int i, io_pg_start, io_pg_count; + + if (type != 0 || mem->type != 0) { + return -EINVAL; + } + + io_pg_start = info->io_pages_per_kpage * pg_start; + io_pg_count = info->io_pages_per_kpage * mem->page_count; + for (i = io_pg_start; i < io_pg_count + io_pg_start; i++) { + info->gatt[i] = agp_bridge->scratch_page; + } + + agp_bridge->driver->tlb_flush(mem); + return 0; +} + +static unsigned long +parisc_agp_mask_memory(struct agp_bridge_data *bridge, + unsigned long addr, int type) +{ + return SBA_PDIR_VALID_BIT | addr; +} + +static void +parisc_agp_enable(struct agp_bridge_data *bridge, u32 mode) +{ + struct _parisc_agp_info *info = &parisc_agp_info; + u32 command; + + command = readl(info->lba_regs + info->lba_cap_offset + PCI_AGP_STATUS); + + command = agp_collect_device_status(bridge, mode, command); + command |= 0x00000100; + + writel(command, info->lba_regs + info->lba_cap_offset + PCI_AGP_COMMAND); + + agp_device_command(command, (mode & AGP8X_MODE) != 0); +} + +struct agp_bridge_driver parisc_agp_driver = { + .owner = THIS_MODULE, + .size_type = FIXED_APER_SIZE, + .configure = parisc_agp_configure, + .fetch_size = parisc_agp_fetch_size, + .tlb_flush = parisc_agp_tlbflush, + .mask_memory = parisc_agp_mask_memory, + .masks = parisc_agp_masks, + .agp_enable = parisc_agp_enable, + .cache_flush = global_cache_flush, + .create_gatt_table = parisc_agp_create_gatt_table, + .free_gatt_table = parisc_agp_free_gatt_table, + .insert_memory = parisc_agp_insert_memory, + .remove_memory = parisc_agp_remove_memory, + .alloc_by_type = agp_generic_alloc_by_type, + .free_by_type = agp_generic_free_by_type, + .agp_alloc_page = agp_generic_alloc_page, + .agp_destroy_page = agp_generic_destroy_page, + .cant_use_aperture = 1, +}; + +static int __init +agp_ioc_init(void __iomem *ioc_regs) +{ + struct _parisc_agp_info *info = &parisc_agp_info; + u64 *iova_base, *io_pdir, io_tlb_ps; + int io_tlb_shift; + + printk(KERN_INFO DRVPFX "IO PDIR shared with sba_iommu\n"); + + info->ioc_regs = ioc_regs; + + io_tlb_ps = readq(info->ioc_regs+IOC_TCNFG); + switch (io_tlb_ps) { + case 0: io_tlb_shift = 12; break; + case 1: io_tlb_shift = 13; break; + case 2: io_tlb_shift = 14; break; + case 3: io_tlb_shift = 16; break; + default: + printk(KERN_ERR DRVPFX "Invalid IOTLB page size " + "configuration 0x%llx\n", io_tlb_ps); + info->gatt = NULL; + info->gatt_entries = 0; + return -ENODEV; + } + info->io_page_size = 1 << io_tlb_shift; + info->io_pages_per_kpage = PAGE_SIZE / info->io_page_size; + + iova_base = readq(info->ioc_regs+IOC_IBASE) & ~0x1; + info->gart_base = iova_base + PLUTO_IOVA_SIZE - PLUTO_GART_SIZE; + + info->gart_size = PLUTO_GART_SIZE; + info->gatt_entries = info->gart_size / info->io_page_size; + + io_pdir = phys_to_virt(readq(info->ioc_regs+IOC_PDIR_BASE)); + info->gatt = &io_pdir[(PLUTO_IOVA_SIZE/2) >> PAGE_SHIFT]; + + if (info->gatt[0] != SBA_AGPGART_COOKIE) { + info->gatt = NULL; + info->gatt_entries = 0; + printk(KERN_ERR DRVPFX "No reserved IO PDIR entry found; " + "GART disabled\n"); + return -ENODEV; + } + + return 0; +} + +static int +lba_find_capability(int cap) +{ + struct _parisc_agp_info *info = &parisc_agp_info; + u16 status; + u8 pos, id; + int ttl = 48; + + status = readw(info->lba_regs + PCI_STATUS); + if (!(status & PCI_STATUS_CAP_LIST)) + return 0; + pos = readb(info->lba_regs + PCI_CAPABILITY_LIST); + while (ttl-- && pos >= 0x40) { + pos &= ~3; + id = readb(info->lba_regs + pos + PCI_CAP_LIST_ID); + if (id == 0xff) + break; + if (id == cap) + return pos; + pos = readb(info->lba_regs + pos + PCI_CAP_LIST_NEXT); + } + return 0; +} + +static int __init +agp_lba_init(void __iomem *lba_hpa) +{ + struct _parisc_agp_info *info = &parisc_agp_info; + int cap; + + info->lba_regs = lba_hpa; + info->lba_cap_offset = lba_find_capability(PCI_CAP_ID_AGP); + + cap = readl(lba_hpa + info->lba_cap_offset) & 0xff; + if (cap != PCI_CAP_ID_AGP) { + printk(KERN_ERR DRVPFX "Invalid capability ID 0x%02x at 0x%x\n", + cap, info->lba_cap_offset); + return -ENODEV; + } + + return 0; +} + +static int __init +parisc_agp_setup(void __iomem *ioc_hpa, void __iomem *lba_hpa) +{ + struct pci_dev *fake_bridge_dev = NULL; + struct agp_bridge_data *bridge; + int error = 0; + + fake_bridge_dev = kmalloc(sizeof (struct pci_dev), GFP_KERNEL); + if (!fake_bridge_dev) { + error = -ENOMEM; + goto fail; + } + + error = agp_ioc_init(ioc_hpa); + if (error) + goto fail; + + error = agp_lba_init(lba_hpa); + if (error) + goto fail; + + bridge = agp_alloc_bridge(); + if (!bridge) { + error = -ENOMEM; + goto fail; + } + bridge->driver = &parisc_agp_driver; + + fake_bridge_dev->vendor = PCI_VENDOR_ID_HP; + fake_bridge_dev->device = PCI_DEVICE_ID_HP_PCIX_LBA; + bridge->dev = fake_bridge_dev; + + error = agp_add_bridge(bridge); + +fail: + return error; +} + +static struct device *next_device(struct klist_iter *i) { + struct klist_node * n = klist_next(i); + return n ? container_of(n, struct device, knode_parent) : NULL; +} + +static int +parisc_agp_init(void) +{ + extern struct sba_device *sba_list; + + int err = -1; + struct parisc_device *sba = NULL, *lba = NULL; + struct lba_device *lbadev = NULL; + struct device *dev = NULL; + struct klist_iter i; + + if (!sba_list) + goto out; + + /* Find our parent Pluto */ + sba = sba_list->dev; + if (!IS_PLUTO(sba)) { + printk(KERN_INFO DRVPFX "No Pluto found, so no AGPGART for you.\n"); + goto out; + } + + /* Now search our Pluto for our precious AGP device... */ + klist_iter_init(&sba->dev.klist_children, &i); + while ((dev = next_device(&i))) { + struct parisc_device *padev = to_parisc_device(dev); + if (IS_QUICKSILVER(padev)) + lba = padev; + } + klist_iter_exit(&i); + + if (!lba) { + printk(KERN_INFO DRVPFX "No AGP devices found.\n"); + goto out; + } + + lbadev = parisc_get_drvdata(lba); + + /* w00t, let's go find our cookies... */ + parisc_agp_setup(sba_list->ioc[0].ioc_hpa, lbadev->hba.base_addr); + + return 0; + +out: + return err; +} + +module_init(parisc_agp_init); + +MODULE_AUTHOR("Kyle McMartin <kyle@parisc-linux.org>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c index d0e92ed0a36..486f97c3f4e 100644 --- a/drivers/char/amiserial.c +++ b/drivers/char/amiserial.c @@ -112,17 +112,6 @@ static struct serial_state rs_table[1]; #define NR_PORTS ARRAY_SIZE(rs_table) -/* - * tmp_buf is used as a temporary buffer by serial_write. We need to - * lock it in case the copy_from_user blocks while swapping in a page, - * and some other program tries to do a serial write at the same time. - * Since the lock will only come under contention when the system is - * swapping and available memory is low, it makes sense to share one - * buffer across all the serial ports, since it significantly saves - * memory if large numbers of serial ports are open. - */ -static unsigned char *tmp_buf; - #include <asm/uaccess.h> #define serial_isroot() (capable(CAP_SYS_ADMIN)) @@ -912,7 +901,7 @@ static int rs_write(struct tty_struct * tty, const unsigned char *buf, int count if (serial_paranoia_check(info, tty->name, "rs_write")) return 0; - if (!info->xmit.buf || !tmp_buf) + if (!info->xmit.buf) return 0; local_save_flags(flags); @@ -1778,7 +1767,6 @@ static int rs_open(struct tty_struct *tty, struct file * filp) { struct async_struct *info; int retval, line; - unsigned long page; line = tty->index; if ((line < 0) || (line >= NR_PORTS)) { @@ -1798,17 +1786,6 @@ static int rs_open(struct tty_struct *tty, struct file * filp) #endif info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; - if (!tmp_buf) { - page = get_zeroed_page(GFP_KERNEL); - if (!page) { - return -ENOMEM; - } - if (tmp_buf) - free_page(page); - else - tmp_buf = (unsigned char *) page; - } - /* * If the port is the middle of closing, bail out now */ @@ -2090,11 +2067,6 @@ static __exit void rs_exit(void) kfree(info); } - if (tmp_buf) { - free_page((unsigned long) tmp_buf); - tmp_buf = NULL; - } - release_mem_region(CUSTOM_PHYSADDR+0x30, 4); } diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index f85b4eb1661..87b2fb51087 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -748,18 +748,6 @@ static struct cyclades_port cy_port[NR_PORTS]; static int cy_next_channel; /* next minor available */ /* - * tmp_buf is used as a temporary buffer by serial_write. We need to - * lock it in case the copy_from_user blocks while swapping in a page, - * and some other program tries to do a serial write at the same time. - * Since the lock will only come under contention when the system is - * swapping and available memory is low, it makes sense to share one - * buffer across all the serial ports, since it significantly saves - * memory if large numbers of serial ports are open. This buffer is - * allocated when the first cy_open occurs. - */ -static unsigned char *tmp_buf; - -/* * This is used to look up the divisor speeds and the timeouts * We're normally limited to 15 distinct baud rates. The extra * are accessed via settings in info->flags. @@ -2466,7 +2454,6 @@ cy_open(struct tty_struct *tty, struct file * filp) { struct cyclades_port *info; int retval, line; - unsigned long page; line = tty->index; if ((line < 0) || (NR_PORTS <= line)){ @@ -2545,15 +2532,6 @@ cy_open(struct tty_struct *tty, struct file * filp) printk("cyc:cy_open (%d): incrementing count to %d\n", current->pid, info->count); #endif - if (!tmp_buf) { - page = get_zeroed_page(GFP_KERNEL); - if (!page) - return -ENOMEM; - if (tmp_buf) - free_page(page); - else - tmp_buf = (unsigned char *) page; - } /* * If the port is the middle of closing, bail out now @@ -2832,7 +2810,7 @@ cy_write(struct tty_struct * tty, const unsigned char *buf, int count) return 0; } - if (!info->xmit_buf || !tmp_buf) + if (!info->xmit_buf) return 0; CY_LOCK(info, flags); @@ -5490,10 +5468,6 @@ cy_cleanup_module(void) #endif } } - if (tmp_buf) { - free_page((unsigned long) tmp_buf); - tmp_buf = NULL; - } } /* cy_cleanup_module */ module_init(cy_init); diff --git a/drivers/char/epca.c b/drivers/char/epca.c index 3baa2ab8cbd..c3f95583a12 100644 --- a/drivers/char/epca.c +++ b/drivers/char/epca.c @@ -1113,11 +1113,8 @@ static void __exit epca_module_exit(void) ch = card_ptr[crd]; for (count = 0; count < bd->numports; count++, ch++) { /* Begin for each port */ - if (ch) { - if (ch->tty) - tty_hangup(ch->tty); - kfree(ch->tmp_buf); - } + if (ch && ch->tty) + tty_hangup(ch->tty); } /* End for each port */ } /* End for each card */ pci_unregister_driver (&epca_driver); @@ -1635,16 +1632,6 @@ static void post_fep_init(unsigned int crd) init_waitqueue_head(&ch->close_wait); spin_unlock_irqrestore(&epca_lock, flags); - - ch->tmp_buf = kmalloc(ch->txbufsize,GFP_KERNEL); - if (!ch->tmp_buf) { - printk(KERN_ERR "POST FEP INIT : kmalloc failed for port 0x%x\n",i); - release_region((int)bd->port, 4); - while(i-- > 0) - kfree((ch--)->tmp_buf); - return; - } else - memset((void *)ch->tmp_buf,0,ch->txbufsize); } /* End for each port */ printk(KERN_INFO diff --git a/drivers/char/epca.h b/drivers/char/epca.h index 456d6c8f94a..a297238cd3b 100644 --- a/drivers/char/epca.h +++ b/drivers/char/epca.h @@ -130,7 +130,6 @@ struct channel unsigned long c_oflag; unsigned char __iomem *txptr; unsigned char __iomem *rxptr; - unsigned char *tmp_buf; struct board_info *board; struct board_chan __iomem *brdchan; struct digi_struct digiext; diff --git a/drivers/char/generic_serial.c b/drivers/char/generic_serial.c index 4711d9b3a59..87127e49c0d 100644 --- a/drivers/char/generic_serial.c +++ b/drivers/char/generic_serial.c @@ -33,8 +33,6 @@ #define DEBUG -static char * tmp_buf; - static int gs_debug; #ifdef DEBUG @@ -205,7 +203,7 @@ int gs_write(struct tty_struct * tty, if (!tty) return -EIO; port = tty->driver_data; - if (!port || !port->xmit_buf || !tmp_buf) + if (!port || !port->xmit_buf) return -EIO; local_save_flags(flags); @@ -837,24 +835,9 @@ void gs_set_termios (struct tty_struct * tty, int gs_init_port(struct gs_port *port) { unsigned long flags; - unsigned long page; func_enter (); - if (!tmp_buf) { - page = get_zeroed_page(GFP_KERNEL); - spin_lock_irqsave (&port->driver_lock, flags); /* Don't expect this to make a difference. */ - if (tmp_buf) - free_page(page); - else - tmp_buf = (unsigned char *) page; - spin_unlock_irqrestore (&port->driver_lock, flags); - if (!tmp_buf) { - func_exit (); - return -ENOMEM; - } - } - if (port->flags & ASYNC_INITIALIZED) { func_exit (); return 0; diff --git a/drivers/char/hvc_iseries.c b/drivers/char/hvc_iseries.c index 8b6f197e5f8..f144a947bd1 100644 --- a/drivers/char/hvc_iseries.c +++ b/drivers/char/hvc_iseries.c @@ -29,6 +29,7 @@ #include <asm/hvconsole.h> #include <asm/vio.h> #include <asm/prom.h> +#include <asm/firmware.h> #include <asm/iseries/vio.h> #include <asm/iseries/hv_call.h> #include <asm/iseries/hv_lp_config.h> @@ -488,6 +489,9 @@ static int hvc_vio_init(void) atomic_t wait_flag; int rc; + if (!firmware_has_feature(FW_FEATURE_ISERIES)) + return -EIO; + /* +2 for fudge */ rc = viopath_open(HvLpConfig_getPrimaryLpIndex(), viomajorsubtype_chario, VIOCHAR_WINDOW + 2); @@ -562,7 +566,7 @@ static int hvc_find_vtys(void) for (vty = of_find_node_by_name(NULL, "vty"); vty != NULL; vty = of_find_node_by_name(vty, "vty")) { - uint32_t *vtermno; + const uint32_t *vtermno; /* We have statically defined space for only a certain number * of console adapters. @@ -571,7 +575,7 @@ static int hvc_find_vtys(void) (num_found >= VTTY_PORTS)) break; - vtermno = (uint32_t *)get_property(vty, "reg", NULL); + vtermno = get_property(vty, "reg", NULL); if (!vtermno) continue; diff --git a/drivers/char/hvc_vio.c b/drivers/char/hvc_vio.c index cc95941148f..f9c00844d2b 100644 --- a/drivers/char/hvc_vio.c +++ b/drivers/char/hvc_vio.c @@ -35,6 +35,7 @@ #include <asm/hvconsole.h> #include <asm/vio.h> #include <asm/prom.h> +#include <asm/firmware.h> #include "hvc_console.h" @@ -120,6 +121,9 @@ static int hvc_vio_init(void) { int rc; + if (firmware_has_feature(FW_FEATURE_ISERIES)) + return -EIO; + /* Register as a vio device to receive callbacks */ rc = vio_register_driver(&hvc_vio_driver); diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c index 214d850112f..b0ab3f28cc6 100644 --- a/drivers/char/riscom8.c +++ b/drivers/char/riscom8.c @@ -81,7 +81,6 @@ static struct riscom_board * IRQ_to_board[16]; static struct tty_driver *riscom_driver; -static unsigned char * tmp_buf; static unsigned long baud_table[] = { 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, @@ -1124,7 +1123,7 @@ static int rc_write(struct tty_struct * tty, bp = port_Board(port); - if (!tty || !port->xmit_buf || !tmp_buf) + if (!tty || !port->xmit_buf) return 0; save_flags(flags); @@ -1612,11 +1611,6 @@ static inline int rc_init_drivers(void) if (!riscom_driver) return -ENOMEM; - if (!(tmp_buf = (unsigned char *) get_zeroed_page(GFP_KERNEL))) { - printk(KERN_ERR "rc: Couldn't get free page.\n"); - put_tty_driver(riscom_driver); - return 1; - } memset(IRQ_to_board, 0, sizeof(IRQ_to_board)); riscom_driver->owner = THIS_MODULE; riscom_driver->name = "ttyL"; @@ -1629,7 +1623,6 @@ static inline int rc_init_drivers(void) riscom_driver->flags = TTY_DRIVER_REAL_RAW; tty_set_operations(riscom_driver, &riscom_ops); if ((error = tty_register_driver(riscom_driver))) { - free_page((unsigned long)tmp_buf); put_tty_driver(riscom_driver); printk(KERN_ERR "rc: Couldn't register RISCom/8 driver, " "error = %d\n", @@ -1657,7 +1650,6 @@ static void rc_release_drivers(void) save_flags(flags); cli(); - free_page((unsigned long)tmp_buf); tty_unregister_driver(riscom_driver); put_tty_driver(riscom_driver); restore_flags(flags); diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c index b4ea1266b66..f4809c8183c 100644 --- a/drivers/char/serial167.c +++ b/drivers/char/serial167.c @@ -119,17 +119,6 @@ struct cyclades_port cy_port[] = { #define NR_PORTS ARRAY_SIZE(cy_port) /* - * tmp_buf is used as a temporary buffer by serial_write. We need to - * lock it in case the copy_from_user blocks while swapping in a page, - * and some other program tries to do a serial write at the same time. - * Since the lock will only come under contention when the system is - * swapping and available memory is low, it makes sense to share one - * buffer across all the serial ports, since it significantly saves - * memory if large numbers of serial ports are open. - */ -static unsigned char *tmp_buf = 0; - -/* * This is used to look up the divisor speeds and the timeouts * We're normally limited to 15 distinct baud rates. The extra * are accessed via settings in info->flags. @@ -1132,7 +1121,7 @@ cy_put_char(struct tty_struct *tty, unsigned char ch) if (serial_paranoia_check(info, tty->name, "cy_put_char")) return; - if (!tty || !info->xmit_buf) + if (!info->xmit_buf) return; local_irq_save(flags); @@ -1198,7 +1187,7 @@ cy_write(struct tty_struct * tty, return 0; } - if (!tty || !info->xmit_buf || !tmp_buf){ + if (!info->xmit_buf){ return 0; } @@ -1983,13 +1972,6 @@ cy_open(struct tty_struct *tty, struct file * filp) tty->driver_data = info; info->tty = tty; - if (!tmp_buf) { - tmp_buf = (unsigned char *) get_zeroed_page(GFP_KERNEL); - if (!tmp_buf){ - return -ENOMEM; - } - } - /* * Start up serial port */ |