diff options
Diffstat (limited to 'drivers/edac')
-rw-r--r-- | drivers/edac/amd64_edac.c | 269 |
1 files changed, 265 insertions, 4 deletions
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 744a49ac9f5..c2e2c3c37f5 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -1398,6 +1398,10 @@ static void f10_read_dram_ctl_register(struct amd64_pvt *pvt) debugf0("Reading F10_DCTL_SEL_HIGH failed\n"); } +/* + * determine channel based on the interleaving mode: F10h BKDG, 2.8.9 Memory + * Interleaving Modes. + */ static u32 f10_determine_channel(struct amd64_pvt *pvt, u64 sys_addr, int hi_range_sel, u32 intlv_en) { @@ -1408,6 +1412,9 @@ static u32 f10_determine_channel(struct amd64_pvt *pvt, u64 sys_addr, else if (hi_range_sel) cs = dct_sel_high; else if (dct_interleave_enabled(pvt)) { + /* + * see F2x110[DctSelIntLvAddr] - channel interleave mode + */ if (dct_sel_interleave_addr(pvt) == 0) cs = sys_addr >> 6 & 1; else if ((dct_sel_interleave_addr(pvt) >> 1) & 1) { @@ -1445,22 +1452,23 @@ static inline u32 f10_map_intlv_en_to_shift(u32 intlv_en) return 0; } -static inline u64 f10_determine_base_addr_offset(u64 sys_addr, int hi_range_sel, +/* See F10h BKDG, 2.8.10.2 DctSelBaseOffset Programming */ +static inline u64 f10_get_base_addr_offset(u64 sys_addr, int hi_range_sel, u32 dct_sel_base_addr, u64 dct_sel_base_off, - u32 hole_en, u32 hole_off, + u32 hole_valid, u32 hole_off, u64 dram_base) { u64 chan_off; if (hi_range_sel) { if (!(dct_sel_base_addr & 0xFFFFF800) && - (hole_en & 1) && (sys_addr >= 0x100000000ULL)) + hole_valid && (sys_addr >= 0x100000000ULL)) chan_off = hole_off << 16; else chan_off = dct_sel_base_off; } else { - if ((hole_en & 1) && (sys_addr >= 0x100000000ULL)) + if (hole_valid && (sys_addr >= 0x100000000ULL)) chan_off = hole_off << 16; else chan_off = dram_base & 0xFFFFF8000000ULL; @@ -1562,4 +1570,257 @@ static int f10_lookup_addr_in_dct(u32 in_addr, u32 nid, u32 cs) return cs_found; } +/* For a given @dram_range, check if @sys_addr falls within it. */ +static int f10_match_to_this_node(struct amd64_pvt *pvt, int dram_range, + u64 sys_addr, int *nid, int *chan_sel) +{ + int node_id, cs_found = -EINVAL, high_range = 0; + u32 intlv_en, intlv_sel, intlv_shift, hole_off; + u32 hole_valid, tmp, dct_sel_base, channel; + u64 dram_base, chan_addr, dct_sel_base_off; + + dram_base = pvt->dram_base[dram_range]; + intlv_en = pvt->dram_IntlvEn[dram_range]; + + node_id = pvt->dram_DstNode[dram_range]; + intlv_sel = pvt->dram_IntlvSel[dram_range]; + + debugf1("(dram=%d) Base=0x%llx SystemAddr= 0x%llx Limit=0x%llx\n", + dram_range, dram_base, sys_addr, pvt->dram_limit[dram_range]); + + /* + * This assumes that one node's DHAR is the same as all the other + * nodes' DHAR. + */ + hole_off = (pvt->dhar & 0x0000FF80); + hole_valid = (pvt->dhar & 0x1); + dct_sel_base_off = (pvt->dram_ctl_select_high & 0xFFFFFC00) << 16; + + debugf1(" HoleOffset=0x%x HoleValid=0x%x IntlvSel=0x%x\n", + hole_off, hole_valid, intlv_sel); + + if (intlv_en || + (intlv_sel != ((sys_addr >> 12) & intlv_en))) + return -EINVAL; + + dct_sel_base = dct_sel_baseaddr(pvt); + + /* + * check whether addresses >= DctSelBaseAddr[47:27] are to be used to + * select between DCT0 and DCT1. + */ + if (dct_high_range_enabled(pvt) && + !dct_ganging_enabled(pvt) && + ((sys_addr >> 27) >= (dct_sel_base >> 11))) + high_range = 1; + + channel = f10_determine_channel(pvt, sys_addr, high_range, intlv_en); + + chan_addr = f10_get_base_addr_offset(sys_addr, high_range, dct_sel_base, + dct_sel_base_off, hole_valid, + hole_off, dram_base); + + intlv_shift = f10_map_intlv_en_to_shift(intlv_en); + + /* remove Node ID (in case of memory interleaving) */ + tmp = chan_addr & 0xFC0; + + chan_addr = ((chan_addr >> intlv_shift) & 0xFFFFFFFFF000ULL) | tmp; + + /* remove channel interleave and hash */ + if (dct_interleave_enabled(pvt) && + !dct_high_range_enabled(pvt) && + !dct_ganging_enabled(pvt)) { + if (dct_sel_interleave_addr(pvt) != 1) + chan_addr = (chan_addr >> 1) & 0xFFFFFFFFFFFFFFC0ULL; + else { + tmp = chan_addr & 0xFC0; + chan_addr = ((chan_addr & 0xFFFFFFFFFFFFC000ULL) >> 1) + | tmp; + } + } + + debugf1(" (ChannelAddrLong=0x%llx) >> 8 becomes InputAddr=0x%x\n", + chan_addr, (u32)(chan_addr >> 8)); + + cs_found = f10_lookup_addr_in_dct(chan_addr >> 8, node_id, channel); + + if (cs_found >= 0) { + *nid = node_id; + *chan_sel = channel; + } + return cs_found; +} + +static int f10_translate_sysaddr_to_cs(struct amd64_pvt *pvt, u64 sys_addr, + int *node, int *chan_sel) +{ + int dram_range, cs_found = -EINVAL; + u64 dram_base, dram_limit; + + for (dram_range = 0; dram_range < DRAM_REG_COUNT; dram_range++) { + + if (!pvt->dram_rw_en[dram_range]) + continue; + + dram_base = pvt->dram_base[dram_range]; + dram_limit = pvt->dram_limit[dram_range]; + + if ((dram_base <= sys_addr) && (sys_addr <= dram_limit)) { + + cs_found = f10_match_to_this_node(pvt, dram_range, + sys_addr, node, + chan_sel); + if (cs_found >= 0) + break; + } + } + return cs_found; +} + +/* + * This the F10h reference code from AMD to map a @sys_addr to NodeID, + * CSROW, Channel. + * + * The @sys_addr is usually an error address received from the hardware. + */ +static void f10_map_sysaddr_to_csrow(struct mem_ctl_info *mci, + struct amd64_error_info_regs *info, + u64 sys_addr) +{ + struct amd64_pvt *pvt = mci->pvt_info; + u32 page, offset; + unsigned short syndrome; + int nid, csrow, chan = 0; + + csrow = f10_translate_sysaddr_to_cs(pvt, sys_addr, &nid, &chan); + + if (csrow >= 0) { + error_address_to_page_and_offset(sys_addr, &page, &offset); + + syndrome = EXTRACT_HIGH_SYNDROME(info->nbsl) << 8; + syndrome |= EXTRACT_LOW_SYNDROME(info->nbsh); + + /* + * Is CHIPKILL on? If so, then we can attempt to use the + * syndrome to isolate which channel the error was on. + */ + if (pvt->nbcfg & K8_NBCFG_CHIPKILL) + chan = get_channel_from_ecc_syndrome(syndrome); + + if (chan >= 0) { + edac_mc_handle_ce(mci, page, offset, syndrome, + csrow, chan, EDAC_MOD_STR); + } else { + /* + * Channel unknown, report all channels on this + * CSROW as failed. + */ + for (chan = 0; chan < mci->csrows[csrow].nr_channels; + chan++) { + edac_mc_handle_ce(mci, page, offset, + syndrome, + csrow, chan, + EDAC_MOD_STR); + } + } + + } else { + edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR); + } +} + +/* + * Input (@index) is the DBAM DIMM value (1 of 4) used as an index into a shift + * table (revf_quad_ddr2_shift) which starts at 128MB DIMM size. Index of 0 + * indicates an empty DIMM slot, as reported by Hardware on empty slots. + * + * Normalize to 128MB by subracting 27 bit shift. + */ +static int map_dbam_to_csrow_size(int index) +{ + int mega_bytes = 0; + + if (index > 0 && index <= DBAM_MAX_VALUE) + mega_bytes = ((128 << (revf_quad_ddr2_shift[index]-27))); + + return mega_bytes; +} + +/* + * debug routine to display the memory sizes of a DIMM (ganged or not) and it + * CSROWs as well + */ +static void f10_debug_display_dimm_sizes(int ctrl, struct amd64_pvt *pvt, + int ganged) +{ + int dimm, size0, size1; + u32 dbam; + u32 *dcsb; + + debugf1(" dbam%d: 0x%8.08x CSROW is %s\n", ctrl, + ctrl ? pvt->dbam1 : pvt->dbam0, + ganged ? "GANGED - dbam1 not used" : "NON-GANGED"); + + dbam = ctrl ? pvt->dbam1 : pvt->dbam0; + dcsb = ctrl ? pvt->dcsb1 : pvt->dcsb0; + + /* Dump memory sizes for DIMM and its CSROWs */ + for (dimm = 0; dimm < 4; dimm++) { + + size0 = 0; + if (dcsb[dimm*2] & K8_DCSB_CS_ENABLE) + size0 = map_dbam_to_csrow_size(DBAM_DIMM(dimm, dbam)); + + size1 = 0; + if (dcsb[dimm*2 + 1] & K8_DCSB_CS_ENABLE) + size1 = map_dbam_to_csrow_size(DBAM_DIMM(dimm, dbam)); + + debugf1(" CTRL-%d DIMM-%d=%5dMB CSROW-%d=%5dMB " + "CSROW-%d=%5dMB\n", + ctrl, + dimm, + size0 + size1, + dimm * 2, + size0, + dimm * 2 + 1, + size1); + } +} + +/* + * Very early hardware probe on pci_probe thread to determine if this module + * supports the hardware. + * + * Return: + * 0 for OK + * 1 for error + */ +static int f10_probe_valid_hardware(struct amd64_pvt *pvt) +{ + int ret = 0; + + /* + * If we are on a DDR3 machine, we don't know yet if + * we support that properly at this time + */ + if ((pvt->dchr0 & F10_DCHR_Ddr3Mode) || + (pvt->dchr1 & F10_DCHR_Ddr3Mode)) { + + amd64_printk(KERN_WARNING, + "%s() This machine is running with DDR3 memory. " + "This is not currently supported. " + "DCHR0=0x%x DCHR1=0x%x\n", + __func__, pvt->dchr0, pvt->dchr1); + + amd64_printk(KERN_WARNING, + " Contact '%s' module MAINTAINER to help add" + " support.\n", + EDAC_MOD_STR); + + ret = 1; + + } + return ret; +} |