1 files changed, 284 insertions, 0 deletions
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
new file mode 100644
index 00000000000..5d9c94eb705
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -0,0 +1,284 @@
+/*
+ * Copyright © 2006-2007 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ */
+
+#include <linux/i2c.h>
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc.h"
+#include "drm_crtc_helper.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+
+static void intel_crt_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 temp;
+
+	temp = I915_READ(ADPA);
+	temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
+	temp &= ~ADPA_DAC_ENABLE;
+
+	switch(mode) {
+	case DRM_MODE_DPMS_ON:
+		temp |= ADPA_DAC_ENABLE;
+		break;
+	case DRM_MODE_DPMS_STANDBY:
+		temp |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE;
+		break;
+	case DRM_MODE_DPMS_SUSPEND:
+		temp |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE;
+		break;
+	case DRM_MODE_DPMS_OFF:
+		temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
+		break;
+	}
+
+	I915_WRITE(ADPA, temp);
+}
+
+static int intel_crt_mode_valid(struct drm_connector *connector,
+				struct drm_display_mode *mode)
+{
+	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+		return MODE_NO_DBLESCAN;
+
+	if (mode->clock > 400000 || mode->clock < 25000)
+		return MODE_CLOCK_RANGE;
+
+	return MODE_OK;
+}
+
+static bool intel_crt_mode_fixup(struct drm_encoder *encoder,
+				 struct drm_display_mode *mode,
+				 struct drm_display_mode *adjusted_mode)
+{
+	return true;
+}
+
+static void intel_crt_mode_set(struct drm_encoder *encoder,
+			       struct drm_display_mode *mode,
+			       struct drm_display_mode *adjusted_mode)
+{
+
+	struct drm_device *dev = encoder->dev;
+	struct drm_crtc *crtc = encoder->crtc;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int dpll_md_reg;
+	u32 adpa, dpll_md;
+
+	if (intel_crtc->pipe == 0)
+		dpll_md_reg = DPLL_A_MD;
+	else
+		dpll_md_reg = DPLL_B_MD;
+
+	/*
+	 * Disable separate mode multiplier used when cloning SDVO to CRT
+	 * XXX this needs to be adjusted when we really are cloning
+	 */
+	if (IS_I965G(dev)) {
+		dpll_md = I915_READ(dpll_md_reg);
+		I915_WRITE(dpll_md_reg,
+			   dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK);
+	}
+
+	adpa = 0;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+		adpa |= ADPA_HSYNC_ACTIVE_HIGH;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+		adpa |= ADPA_VSYNC_ACTIVE_HIGH;
+
+	if (intel_crtc->pipe == 0)
+		adpa |= ADPA_PIPE_A_SELECT;
+	else
+		adpa |= ADPA_PIPE_B_SELECT;
+
+	I915_WRITE(ADPA, adpa);
+}
+
+/**
+ * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect CRT presence.
+ *
+ * Not for i915G/i915GM
+ *
+ * \return true if CRT is connected.
+ * \return false if CRT is disconnected.
+ */
+static bool intel_crt_detect_hotplug(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 temp;
+
+	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
+
+	temp = I915_READ(PORT_HOTPLUG_EN);
+
+	I915_WRITE(PORT_HOTPLUG_EN,
+		   temp | CRT_HOTPLUG_FORCE_DETECT | (1 << 5));
+
+	do {
+		if (!(I915_READ(PORT_HOTPLUG_EN) & CRT_HOTPLUG_FORCE_DETECT))
+			break;
+		msleep(1);
+	} while (time_after(timeout, jiffies));
+
+	if ((I915_READ(PORT_HOTPLUG_STAT) & CRT_HOTPLUG_MONITOR_MASK) ==
+	    CRT_HOTPLUG_MONITOR_COLOR)
+		return true;
+
+	return false;
+}
+
+static bool intel_crt_detect_ddc(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+
+	/* CRT should always be at 0, but check anyway */
+	if (intel_output->type != INTEL_OUTPUT_ANALOG)
+		return false;
+
+	return intel_ddc_probe(intel_output);
+}
+
+static enum drm_connector_status intel_crt_detect(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+
+	if (IS_I9XX(dev) && !IS_I915G(dev) && !IS_I915GM(dev)) {
+		if (intel_crt_detect_hotplug(connector))
+			return connector_status_connected;
+		else
+			return connector_status_disconnected;
+	}
+
+	if (intel_crt_detect_ddc(connector))
+		return connector_status_connected;
+
+	/* TODO use load detect */
+	return connector_status_unknown;
+}
+
+static void intel_crt_destroy(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+
+	intel_i2c_destroy(intel_output->ddc_bus);
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+
+static int intel_crt_get_modes(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+	return intel_ddc_get_modes(intel_output);
+}
+
+static int intel_crt_set_property(struct drm_connector *connector,
+				  struct drm_property *property,
+				  uint64_t value)
+{
+	struct drm_device *dev = connector->dev;
+
+	if (property == dev->mode_config.dpms_property && connector->encoder)
+		intel_crt_dpms(connector->encoder, (uint32_t)(value & 0xf));
+
+	return 0;
+}
+
+/*
+ * Routines for controlling stuff on the analog port
+ */
+
+static const struct drm_encoder_helper_funcs intel_crt_helper_funcs = {
+	.dpms = intel_crt_dpms,
+	.mode_fixup = intel_crt_mode_fixup,
+	.prepare = intel_encoder_prepare,
+	.commit = intel_encoder_commit,
+	.mode_set = intel_crt_mode_set,
+};
+
+static const struct drm_connector_funcs intel_crt_connector_funcs = {
+	.detect = intel_crt_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = intel_crt_destroy,
+	.set_property = intel_crt_set_property,
+};
+
+static const struct drm_connector_helper_funcs intel_crt_connector_helper_funcs = {
+	.mode_valid = intel_crt_mode_valid,
+	.get_modes = intel_crt_get_modes,
+	.best_encoder = intel_best_encoder,
+};
+
+void intel_crt_enc_destroy(struct drm_encoder *encoder)
+{
+	drm_encoder_cleanup(encoder);
+}
+
+static const struct drm_encoder_funcs intel_crt_enc_funcs = {
+	.destroy = intel_crt_enc_destroy,
+};
+
+void intel_crt_init(struct drm_device *dev)
+{
+	struct drm_connector *connector;
+	struct intel_output *intel_output;
+
+	intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
+	if (!intel_output)
+		return;
+
+	connector = &intel_output->base;
+	drm_connector_init(dev, &intel_output->base,
+			   &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
+
+	drm_encoder_init(dev, &intel_output->enc, &intel_crt_enc_funcs,
+			 DRM_MODE_ENCODER_DAC);
+
+	drm_mode_connector_attach_encoder(&intel_output->base,
+					  &intel_output->enc);
+
+	/* Set up the DDC bus. */
+	intel_output->ddc_bus = intel_i2c_create(dev, GPIOA, "CRTDDC_A");
+	if (!intel_output->ddc_bus) {
+		dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
+			   "failed.\n");
+		return;
+	}
+
+	intel_output->type = INTEL_OUTPUT_ANALOG;
+	connector->interlace_allowed = 0;
+	connector->doublescan_allowed = 0;
+
+	drm_encoder_helper_add(&intel_output->enc, &intel_crt_helper_funcs);
+	drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
+
+	drm_sysfs_connector_add(connector);
+}