diff options
Diffstat (limited to 'drivers/hwmon/abituguru.c')
| -rw-r--r-- | drivers/hwmon/abituguru.c | 45 |
1 files changed, 33 insertions, 12 deletions
diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c index bede4d990ea..2317f4bb9c9 100644 --- a/drivers/hwmon/abituguru.c +++ b/drivers/hwmon/abituguru.c @@ -16,9 +16,9 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* - This driver supports the sensor part of the custom Abit uGuru chip found - on Abit uGuru motherboards. Note: because of lack of specs the CPU / RAM / - etc voltage & frequency control is not supported! + This driver supports the sensor part of the first and second revision of + the custom Abit uGuru chip found on Abit uGuru motherboards. Note: because + of lack of specs the CPU/RAM voltage & frequency control is not supported! */ #include <linux/module.h> #include <linux/sched.h> @@ -31,6 +31,7 @@ #include <linux/platform_device.h> #include <linux/hwmon.h> #include <linux/hwmon-sysfs.h> +#include <linux/dmi.h> #include <asm/io.h> /* Banks */ @@ -418,7 +419,7 @@ static int __devinit abituguru_detect_bank1_sensor_type(struct abituguru_data *data, u8 sensor_addr) { - u8 val, buf[3]; + u8 val, test_flag, buf[3]; int i, ret = -ENODEV; /* error is the most common used retval :| */ /* If overriden by the user return the user selected type */ @@ -436,7 +437,7 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data, return -ENODEV; /* Test val is sane / usable for sensor type detection. */ - if ((val < 10u) || (val > 240u)) { + if ((val < 10u) || (val > 250u)) { printk(KERN_WARNING ABIT_UGURU_NAME ": bank1-sensor: %d reading (%d) too close to limits, " "unable to determine sensor type, skipping sensor\n", @@ -449,10 +450,20 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data, ABIT_UGURU_DEBUG(2, "testing bank1 sensor %d\n", (int)sensor_addr); /* Volt sensor test, enable volt low alarm, set min value ridicously - high. If its a volt sensor this should always give us an alarm. */ - buf[0] = ABIT_UGURU_VOLT_LOW_ALARM_ENABLE; - buf[1] = 245; - buf[2] = 250; + high, or vica versa if the reading is very high. If its a volt + sensor this should always give us an alarm. */ + if (val <= 240u) { + buf[0] = ABIT_UGURU_VOLT_LOW_ALARM_ENABLE; + buf[1] = 245; + buf[2] = 250; + test_flag = ABIT_UGURU_VOLT_LOW_ALARM_FLAG; + } else { + buf[0] = ABIT_UGURU_VOLT_HIGH_ALARM_ENABLE; + buf[1] = 5; + buf[2] = 10; + test_flag = ABIT_UGURU_VOLT_HIGH_ALARM_FLAG; + } + if (abituguru_write(data, ABIT_UGURU_SENSOR_BANK1 + 2, sensor_addr, buf, 3) != 3) goto abituguru_detect_bank1_sensor_type_exit; @@ -469,13 +480,13 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data, sensor_addr, buf, 3, ABIT_UGURU_MAX_RETRIES) != 3) goto abituguru_detect_bank1_sensor_type_exit; - if (buf[0] & ABIT_UGURU_VOLT_LOW_ALARM_FLAG) { + if (buf[0] & test_flag) { ABIT_UGURU_DEBUG(2, " found volt sensor\n"); ret = ABIT_UGURU_IN_SENSOR; goto abituguru_detect_bank1_sensor_type_exit; } else ABIT_UGURU_DEBUG(2, " alarm raised during volt " - "sensor test, but volt low flag not set\n"); + "sensor test, but volt range flag not set\n"); } else ABIT_UGURU_DEBUG(2, " alarm not raised during volt sensor " "test\n"); @@ -1287,6 +1298,7 @@ abituguru_probe_error: for (i = 0; i < ARRAY_SIZE(abituguru_sysfs_attr); i++) device_remove_file(&pdev->dev, &abituguru_sysfs_attr[i].dev_attr); + platform_set_drvdata(pdev, NULL); kfree(data); return res; } @@ -1296,13 +1308,13 @@ static int __devexit abituguru_remove(struct platform_device *pdev) int i; struct abituguru_data *data = platform_get_drvdata(pdev); - platform_set_drvdata(pdev, NULL); hwmon_device_unregister(data->class_dev); for (i = 0; data->sysfs_attr[i].dev_attr.attr.name; i++) device_remove_file(&pdev->dev, &data->sysfs_attr[i].dev_attr); for (i = 0; i < ARRAY_SIZE(abituguru_sysfs_attr); i++) device_remove_file(&pdev->dev, &abituguru_sysfs_attr[i].dev_attr); + platform_set_drvdata(pdev, NULL); kfree(data); return 0; @@ -1436,6 +1448,15 @@ static int __init abituguru_init(void) int address, err; struct resource res = { .flags = IORESOURCE_IO }; +#ifdef CONFIG_DMI + const char *board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR); + + /* safety check, refuse to load on non Abit motherboards */ + if (!force && (!board_vendor || + strcmp(board_vendor, "http://www.abit.com.tw/"))) + return -ENODEV; +#endif + address = abituguru_detect(); if (address < 0) return address; |