diff options
Diffstat (limited to 'drivers/hwmon/via686a.c')
| -rw-r--r-- | drivers/hwmon/via686a.c | 28 |
1 files changed, 15 insertions, 13 deletions
diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c index 05ddc88e7dd..6f696f89717 100644 --- a/drivers/hwmon/via686a.c +++ b/drivers/hwmon/via686a.c @@ -44,7 +44,7 @@ /* If force_addr is set to anything different from 0, we forcibly enable the device at the given address. */ -static unsigned short force_addr = 0; +static unsigned short force_addr; module_param(force_addr, ushort, 0); MODULE_PARM_DESC(force_addr, "Initialize the base address of the sensors"); @@ -198,7 +198,7 @@ static inline u8 FAN_TO_REG(long rpm, int div) but the function is very linear in the useful range (0-80 deg C), so we'll just use linear interpolation for 10-bit readings.) So, tempLUT is the temp at via register values 0-255: */ -static const long tempLUT[] = +static const s16 tempLUT[] = { -709, -688, -667, -646, -627, -607, -589, -570, -553, -536, -519, -503, -487, -471, -456, -442, -428, -414, -400, -387, -375, -362, -350, -339, -327, -316, -305, -295, -285, -275, -265, @@ -270,7 +270,7 @@ static inline u8 TEMP_TO_REG(long val) } /* for 8-bit temperature hyst and over registers */ -#define TEMP_FROM_REG(val) (tempLUT[(val)] * 100) +#define TEMP_FROM_REG(val) ((long)tempLUT[val] * 100) /* for 10-bit temperature readings */ static inline long TEMP_FROM_REG10(u16 val) @@ -589,10 +589,8 @@ static int via686a_detect(struct i2c_adapter *adapter) u16 val; /* 8231 requires multiple of 256, we enforce that on 686 as well */ - if (force_addr) - address = force_addr & 0xFF00; - if (force_addr) { + address = force_addr & 0xFF00; dev_warn(&adapter->dev, "forcing ISA address 0x%04X\n", address); if (PCIBIOS_SUCCESSFUL != @@ -603,11 +601,17 @@ static int via686a_detect(struct i2c_adapter *adapter) pci_read_config_word(s_bridge, VIA686A_ENABLE_REG, &val)) return -ENODEV; if (!(val & 0x0001)) { - dev_warn(&adapter->dev, "enabling sensors\n"); - if (PCIBIOS_SUCCESSFUL != - pci_write_config_word(s_bridge, VIA686A_ENABLE_REG, - val | 0x0001)) + if (force_addr) { + dev_info(&adapter->dev, "enabling sensors\n"); + if (PCIBIOS_SUCCESSFUL != + pci_write_config_word(s_bridge, VIA686A_ENABLE_REG, + val | 0x0001)) + return -ENODEV; + } else { + dev_warn(&adapter->dev, "sensors disabled - enable " + "with force_addr=0x%x\n", address); return -ENODEV; + } } /* Reserve the ISA region */ @@ -617,11 +621,10 @@ static int via686a_detect(struct i2c_adapter *adapter) return -ENODEV; } - if (!(data = kmalloc(sizeof(struct via686a_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct via686a_data), GFP_KERNEL))) { err = -ENOMEM; goto exit_release; } - memset(data, 0, sizeof(struct via686a_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); @@ -708,7 +711,6 @@ static int via686a_detach_client(struct i2c_client *client) return 0; } -/* Called when we have found a new VIA686A. Set limits, etc. */ static void via686a_init_client(struct i2c_client *client) { u8 reg; |