aboutsummaryrefslogtreecommitdiff
path: root/drivers/hwmon/w83627hf.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon/w83627hf.c')
-rw-r--r--drivers/hwmon/w83627hf.c1511
1 files changed, 1511 insertions, 0 deletions
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
new file mode 100644
index 00000000000..bd87a42e068
--- /dev/null
+++ b/drivers/hwmon/w83627hf.c
@@ -0,0 +1,1511 @@
+/*
+ w83627hf.c - Part of lm_sensors, Linux kernel modules for hardware
+ monitoring
+ Copyright (c) 1998 - 2003 Frodo Looijaard <frodol@dds.nl>,
+ Philip Edelbrock <phil@netroedge.com>,
+ and Mark Studebaker <mdsxyz123@yahoo.com>
+ Ported to 2.6 by Bernhard C. Schrenk <clemy@clemy.org>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+ Supports following chips:
+
+ Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
+ w83627hf 9 3 2 3 0x20 0x5ca3 no yes(LPC)
+ w83627thf 7 3 3 3 0x90 0x5ca3 no yes(LPC)
+ w83637hf 7 3 3 3 0x80 0x5ca3 no yes(LPC)
+ w83697hf 8 2 2 2 0x60 0x5ca3 no yes(LPC)
+
+ For other winbond chips, and for i2c support in the above chips,
+ use w83781d.c.
+
+ Note: automatic ("cruise") fan control for 697, 637 & 627thf not
+ supported yet.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/i2c-vid.h>
+#include <asm/io.h>
+#include "lm75.h"
+
+static u16 force_addr;
+module_param(force_addr, ushort, 0);
+MODULE_PARM_DESC(force_addr,
+ "Initialize the base address of the sensors");
+static u8 force_i2c = 0x1f;
+module_param(force_i2c, byte, 0);
+MODULE_PARM_DESC(force_i2c,
+ "Initialize the i2c address of the sensors");
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+static unsigned int normal_isa[] = { 0, I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_4(w83627hf, w83627thf, w83697hf, w83637hf);
+
+static int init = 1;
+module_param(init, bool, 0);
+MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
+
+/* modified from kernel/include/traps.c */
+static int REG; /* The register to read/write */
+#define DEV 0x07 /* Register: Logical device select */
+static int VAL; /* The value to read/write */
+
+/* logical device numbers for superio_select (below) */
+#define W83627HF_LD_FDC 0x00
+#define W83627HF_LD_PRT 0x01
+#define W83627HF_LD_UART1 0x02
+#define W83627HF_LD_UART2 0x03
+#define W83627HF_LD_KBC 0x05
+#define W83627HF_LD_CIR 0x06 /* w83627hf only */
+#define W83627HF_LD_GAME 0x07
+#define W83627HF_LD_MIDI 0x07
+#define W83627HF_LD_GPIO1 0x07
+#define W83627HF_LD_GPIO5 0x07 /* w83627thf only */
+#define W83627HF_LD_GPIO2 0x08
+#define W83627HF_LD_GPIO3 0x09
+#define W83627HF_LD_GPIO4 0x09 /* w83627thf only */
+#define W83627HF_LD_ACPI 0x0a
+#define W83627HF_LD_HWM 0x0b
+
+#define DEVID 0x20 /* Register: Device ID */
+
+#define W83627THF_GPIO5_EN 0x30 /* w83627thf only */
+#define W83627THF_GPIO5_IOSR 0xf3 /* w83627thf only */
+#define W83627THF_GPIO5_DR 0xf4 /* w83627thf only */
+
+static inline void
+superio_outb(int reg, int val)
+{
+ outb(reg, REG);
+ outb(val, VAL);
+}
+
+static inline int
+superio_inb(int reg)
+{
+ outb(reg, REG);
+ return inb(VAL);
+}
+
+static inline void
+superio_select(int ld)
+{
+ outb(DEV, REG);
+ outb(ld, VAL);
+}
+
+static inline void
+superio_enter(void)
+{
+ outb(0x87, REG);
+ outb(0x87, REG);
+}
+
+static inline void
+superio_exit(void)
+{
+ outb(0xAA, REG);
+}
+
+#define W627_DEVID 0x52
+#define W627THF_DEVID 0x82
+#define W697_DEVID 0x60
+#define W637_DEVID 0x70
+#define WINB_ACT_REG 0x30
+#define WINB_BASE_REG 0x60
+/* Constants specified below */
+
+/* Length of ISA address segment */
+#define WINB_EXTENT 8
+
+/* Where are the ISA address/data registers relative to the base address */
+#define W83781D_ADDR_REG_OFFSET 5
+#define W83781D_DATA_REG_OFFSET 6
+
+/* The W83781D registers */
+/* The W83782D registers for nr=7,8 are in bank 5 */
+#define W83781D_REG_IN_MAX(nr) ((nr < 7) ? (0x2b + (nr) * 2) : \
+ (0x554 + (((nr) - 7) * 2)))
+#define W83781D_REG_IN_MIN(nr) ((nr < 7) ? (0x2c + (nr) * 2) : \
+ (0x555 + (((nr) - 7) * 2)))
+#define W83781D_REG_IN(nr) ((nr < 7) ? (0x20 + (nr)) : \
+ (0x550 + (nr) - 7))
+
+#define W83781D_REG_FAN_MIN(nr) (0x3a + (nr))
+#define W83781D_REG_FAN(nr) (0x27 + (nr))
+
+#define W83781D_REG_TEMP2_CONFIG 0x152
+#define W83781D_REG_TEMP3_CONFIG 0x252
+#define W83781D_REG_TEMP(nr) ((nr == 3) ? (0x0250) : \
+ ((nr == 2) ? (0x0150) : \
+ (0x27)))
+#define W83781D_REG_TEMP_HYST(nr) ((nr == 3) ? (0x253) : \
+ ((nr == 2) ? (0x153) : \
+ (0x3A)))
+#define W83781D_REG_TEMP_OVER(nr) ((nr == 3) ? (0x255) : \
+ ((nr == 2) ? (0x155) : \
+ (0x39)))
+
+#define W83781D_REG_BANK 0x4E
+
+#define W83781D_REG_CONFIG 0x40
+#define W83781D_REG_ALARM1 0x41
+#define W83781D_REG_ALARM2 0x42
+#define W83781D_REG_ALARM3 0x450
+
+#define W83781D_REG_IRQ 0x4C
+#define W83781D_REG_BEEP_CONFIG 0x4D
+#define W83781D_REG_BEEP_INTS1 0x56
+#define W83781D_REG_BEEP_INTS2 0x57
+#define W83781D_REG_BEEP_INTS3 0x453
+
+#define W83781D_REG_VID_FANDIV 0x47
+
+#define W83781D_REG_CHIPID 0x49
+#define W83781D_REG_WCHIPID 0x58
+#define W83781D_REG_CHIPMAN 0x4F
+#define W83781D_REG_PIN 0x4B
+
+#define W83781D_REG_VBAT 0x5D
+
+#define W83627HF_REG_PWM1 0x5A
+#define W83627HF_REG_PWM2 0x5B
+#define W83627HF_REG_PWMCLK12 0x5C
+
+#define W83627THF_REG_PWM1 0x01 /* 697HF and 637HF too */
+#define W83627THF_REG_PWM2 0x03 /* 697HF and 637HF too */
+#define W83627THF_REG_PWM3 0x11 /* 637HF too */
+
+#define W83627THF_REG_VRM_OVT_CFG 0x18 /* 637HF too */
+
+static const u8 regpwm_627hf[] = { W83627HF_REG_PWM1, W83627HF_REG_PWM2 };
+static const u8 regpwm[] = { W83627THF_REG_PWM1, W83627THF_REG_PWM2,
+ W83627THF_REG_PWM3 };
+#define W836X7HF_REG_PWM(type, nr) (((type) == w83627hf) ? \
+ regpwm_627hf[(nr) - 1] : regpwm[(nr) - 1])
+
+#define W83781D_REG_I2C_ADDR 0x48
+#define W83781D_REG_I2C_SUBADDR 0x4A
+
+/* Sensor selection */
+#define W83781D_REG_SCFG1 0x5D
+static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 };
+#define W83781D_REG_SCFG2 0x59
+static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 };
+#define W83781D_DEFAULT_BETA 3435
+
+/* Conversions. Limit checking is only done on the TO_REG
+ variants. Note that you should be a bit careful with which arguments
+ these macros are called: arguments may be evaluated more than once.
+ Fixing this is just not worth it. */
+#define IN_TO_REG(val) (SENSORS_LIMIT((((val) + 8)/16),0,255))
+#define IN_FROM_REG(val) ((val) * 16)
+
+static inline u8 FAN_TO_REG(long rpm, int div)
+{
+ if (rpm == 0)
+ return 255;
+ rpm = SENSORS_LIMIT(rpm, 1, 1000000);
+ return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1,
+ 254);
+}
+
+#define TEMP_MIN (-128000)
+#define TEMP_MAX ( 127000)
+
+/* TEMP: 0.001C/bit (-128C to +127C)
+ REG: 1C/bit, two's complement */
+static u8 TEMP_TO_REG(int temp)
+{
+ int ntemp = SENSORS_LIMIT(temp, TEMP_MIN, TEMP_MAX);
+ ntemp += (ntemp<0 ? -500 : 500);
+ return (u8)(ntemp / 1000);
+}
+
+static int TEMP_FROM_REG(u8 reg)
+{
+ return (s8)reg * 1000;
+}
+
+#define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div)))
+
+#define PWM_TO_REG(val) (SENSORS_LIMIT((val),0,255))
+
+#define BEEP_MASK_FROM_REG(val) (val)
+#define BEEP_MASK_TO_REG(val) ((val) & 0xffffff)
+#define BEEP_ENABLE_TO_REG(val) ((val)?1:0)
+#define BEEP_ENABLE_FROM_REG(val) ((val)?1:0)
+
+#define DIV_FROM_REG(val) (1 << (val))
+
+static inline u8 DIV_TO_REG(long val)
+{
+ int i;
+ val = SENSORS_LIMIT(val, 1, 128) >> 1;
+ for (i = 0; i < 7; i++) {
+ if (val == 0)
+ break;
+ val >>= 1;
+ }
+ return ((u8) i);
+}
+
+/* For each registered chip, we need to keep some data in memory. That
+ data is pointed to by w83627hf_list[NR]->data. The structure itself is
+ dynamically allocated, at the same time when a new client is allocated. */
+struct w83627hf_data {
+ struct i2c_client client;
+ struct semaphore lock;
+ enum chips type;
+
+ struct semaphore update_lock;
+ char valid; /* !=0 if following fields are valid */
+ unsigned long last_updated; /* In jiffies */
+
+ struct i2c_client *lm75; /* for secondary I2C addresses */
+ /* pointer to array of 2 subclients */
+
+ u8 in[9]; /* Register value */
+ u8 in_max[9]; /* Register value */
+ u8 in_min[9]; /* Register value */
+ u8 fan[3]; /* Register value */
+ u8 fan_min[3]; /* Register value */
+ u8 temp;
+ u8 temp_max; /* Register value */
+ u8 temp_max_hyst; /* Register value */
+ u16 temp_add[2]; /* Register value */
+ u16 temp_max_add[2]; /* Register value */
+ u16 temp_max_hyst_add[2]; /* Register value */
+ u8 fan_div[3]; /* Register encoding, shifted right */
+ u8 vid; /* Register encoding, combined */
+ u32 alarms; /* Register encoding, combined */
+ u32 beep_mask; /* Register encoding, combined */
+ u8 beep_enable; /* Boolean */
+ u8 pwm[3]; /* Register value */
+ u16 sens[3]; /* 782D/783S only.
+ 1 = pentium diode; 2 = 3904 diode;
+ 3000-5000 = thermistor beta.
+ Default = 3435.
+ Other Betas unimplemented */
+ u8 vrm;
+ u8 vrm_ovt; /* Register value, 627thf & 637hf only */
+};
+
+
+static int w83627hf_attach_adapter(struct i2c_adapter *adapter);
+static int w83627hf_detect(struct i2c_adapter *adapter, int address,
+ int kind);
+static int w83627hf_detach_client(struct i2c_client *client);
+
+static int w83627hf_read_value(struct i2c_client *client, u16 register);
+static int w83627hf_write_value(struct i2c_client *client, u16 register,
+ u16 value);
+static struct w83627hf_data *w83627hf_update_device(struct device *dev);
+static void w83627hf_init_client(struct i2c_client *client);
+
+static struct i2c_driver w83627hf_driver = {
+ .owner = THIS_MODULE,
+ .name = "w83627hf",
+ .id = I2C_DRIVERID_W83627HF,
+ .flags = I2C_DF_NOTIFY,
+ .attach_adapter = w83627hf_attach_adapter,
+ .detach_client = w83627hf_detach_client,
+};
+
+/* following are the sysfs callback functions */
+#define show_in_reg(reg) \
+static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
+{ \
+ struct w83627hf_data *data = w83627hf_update_device(dev); \
+ return sprintf(buf,"%ld\n", (long)IN_FROM_REG(data->reg[nr])); \
+}
+show_in_reg(in)
+show_in_reg(in_min)
+show_in_reg(in_max)
+
+#define store_in_reg(REG, reg) \
+static ssize_t \
+store_in_##reg (struct device *dev, const char *buf, size_t count, int nr) \
+{ \
+ struct i2c_client *client = to_i2c_client(dev); \
+ struct w83627hf_data *data = i2c_get_clientdata(client); \
+ u32 val; \
+ \
+ val = simple_strtoul(buf, NULL, 10); \
+ \
+ down(&data->update_lock); \
+ data->in_##reg[nr] = IN_TO_REG(val); \
+ w83627hf_write_value(client, W83781D_REG_IN_##REG(nr), \
+ data->in_##reg[nr]); \
+ \
+ up(&data->update_lock); \
+ return count; \
+}
+store_in_reg(MIN, min)
+store_in_reg(MAX, max)
+
+#define sysfs_in_offset(offset) \
+static ssize_t \
+show_regs_in_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+ return show_in(dev, buf, offset); \
+} \
+static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_regs_in_##offset, NULL);
+
+#define sysfs_in_reg_offset(reg, offset) \
+static ssize_t show_regs_in_##reg##offset (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+ return show_in_##reg (dev, buf, offset); \
+} \
+static ssize_t \
+store_regs_in_##reg##offset (struct device *dev, struct device_attribute *attr, \
+ const char *buf, size_t count) \
+{ \
+ return store_in_##reg (dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(in##offset##_##reg, S_IRUGO| S_IWUSR, \
+ show_regs_in_##reg##offset, store_regs_in_##reg##offset);
+
+#define sysfs_in_offsets(offset) \
+sysfs_in_offset(offset) \
+sysfs_in_reg_offset(min, offset) \
+sysfs_in_reg_offset(max, offset)
+
+sysfs_in_offsets(1);
+sysfs_in_offsets(2);
+sysfs_in_offsets(3);
+sysfs_in_offsets(4);
+sysfs_in_offsets(5);
+sysfs_in_offsets(6);
+sysfs_in_offsets(7);
+sysfs_in_offsets(8);
+
+/* use a different set of functions for in0 */
+static ssize_t show_in_0(struct w83627hf_data *data, char *buf, u8 reg)
+{
+ long in0;
+
+ if ((data->vrm_ovt & 0x01) &&
+ (w83627thf == data->type || w83637hf == data->type))
+
+ /* use VRM9 calculation */
+ in0 = (long)((reg * 488 + 70000 + 50) / 100);
+ else
+ /* use VRM8 (standard) calculation */
+ in0 = (long)IN_FROM_REG(reg);
+
+ return sprintf(buf,"%ld\n", in0);
+}
+
+static ssize_t show_regs_in_0(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ return show_in_0(data, buf, data->in[0]);
+}
+
+static ssize_t show_regs_in_min0(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ return show_in_0(data, buf, data->in_min[0]);
+}
+
+static ssize_t show_regs_in_max0(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ return show_in_0(data, buf, data->in_max[0]);
+}
+
+static ssize_t store_regs_in_min0(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83627hf_data *data = i2c_get_clientdata(client);
+ u32 val;
+
+ val = simple_strtoul(buf, NULL, 10);
+
+ down(&data->update_lock);
+
+ if ((data->vrm_ovt & 0x01) &&
+ (w83627thf == data->type || w83637hf == data->type))
+
+ /* use VRM9 calculation */
+ data->in_min[0] = (u8)(((val * 100) - 70000 + 244) / 488);
+ else
+ /* use VRM8 (standard) calculation */
+ data->in_min[0] = IN_TO_REG(val);
+
+ w83627hf_write_value(client, W83781D_REG_IN_MIN(0), data->in_min[0]);
+ up(&data->update_lock);
+ return count;
+}
+
+static ssize_t store_regs_in_max0(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83627hf_data *data = i2c_get_clientdata(client);
+ u32 val;
+
+ val = simple_strtoul(buf, NULL, 10);
+
+ down(&data->update_lock);
+
+ if ((data->vrm_ovt & 0x01) &&
+ (w83627thf == data->type || w83637hf == data->type))
+
+ /* use VRM9 calculation */
+ data->in_max[0] = (u8)(((val * 100) - 70000 + 244) / 488);
+ else
+ /* use VRM8 (standard) calculation */
+ data->in_max[0] = IN_TO_REG(val);
+
+ w83627hf_write_value(client, W83781D_REG_IN_MAX(0), data->in_max[0]);
+ up(&data->update_lock);
+ return count;
+}
+
+static DEVICE_ATTR(in0_input, S_IRUGO, show_regs_in_0, NULL);
+static DEVICE_ATTR(in0_min, S_IRUGO | S_IWUSR,
+ show_regs_in_min0, store_regs_in_min0);
+static DEVICE_ATTR(in0_max, S_IRUGO | S_IWUSR,
+ show_regs_in_max0, store_regs_in_max0);
+
+#define device_create_file_in(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_in##offset##_input); \
+device_create_file(&client->dev, &dev_attr_in##offset##_min); \
+device_create_file(&client->dev, &dev_attr_in##offset##_max); \
+} while (0)
+
+#define show_fan_reg(reg) \
+static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
+{ \
+ struct w83627hf_data *data = w83627hf_update_device(dev); \
+ return sprintf(buf,"%ld\n", \
+ FAN_FROM_REG(data->reg[nr-1], \
+ (long)DIV_FROM_REG(data->fan_div[nr-1]))); \
+}
+show_fan_reg(fan);
+show_fan_reg(fan_min);
+
+static ssize_t
+store_fan_min(struct device *dev, const char *buf, size_t count, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83627hf_data *data = i2c_get_clientdata(client);
+ u32 val;
+
+ val = simple_strtoul(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->fan_min[nr - 1] =
+ FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr - 1]));
+ w83627hf_write_value(client, W83781D_REG_FAN_MIN(nr),
+ data->fan_min[nr - 1]);
+
+ up(&data->update_lock);
+ return count;
+}
+
+#define sysfs_fan_offset(offset) \
+static ssize_t show_regs_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+ return show_fan(dev, buf, offset); \
+} \
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_regs_fan_##offset, NULL);
+
+#define sysfs_fan_min_offset(offset) \
+static ssize_t show_regs_fan_min##offset (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+ return show_fan_min(dev, buf, offset); \
+} \
+static ssize_t \
+store_regs_fan_min##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
+{ \
+ return store_fan_min(dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
+ show_regs_fan_min##offset, store_regs_fan_min##offset);
+
+sysfs_fan_offset(1);
+sysfs_fan_min_offset(1);
+sysfs_fan_offset(2);
+sysfs_fan_min_offset(2);
+sysfs_fan_offset(3);
+sysfs_fan_min_offset(3);
+
+#define device_create_file_fan(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_fan##offset##_input); \
+device_create_file(&client->dev, &dev_attr_fan##offset##_min); \
+} while (0)
+
+#define show_temp_reg(reg) \
+static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
+{ \
+ struct w83627hf_data *data = w83627hf_update_device(dev); \
+ if (nr >= 2) { /* TEMP2 and TEMP3 */ \
+ return sprintf(buf,"%ld\n", \
+ (long)LM75_TEMP_FROM_REG(data->reg##_add[nr-2])); \
+ } else { /* TEMP1 */ \
+ return sprintf(buf,"%ld\n", (long)TEMP_FROM_REG(data->reg)); \
+ } \
+}
+show_temp_reg(temp);
+show_temp_reg(temp_max);
+show_temp_reg(temp_max_hyst);
+
+#define store_temp_reg(REG, reg) \
+static ssize_t \
+store_temp_##reg (struct device *dev, const char *buf, size_t count, int nr) \
+{ \
+ struct i2c_client *client = to_i2c_client(dev); \
+ struct w83627hf_data *data = i2c_get_clientdata(client); \
+ u32 val; \
+ \
+ val = simple_strtoul(buf, NULL, 10); \
+ \
+ down(&data->update_lock); \
+ \
+ if (nr >= 2) { /* TEMP2 and TEMP3 */ \
+ data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \
+ w83627hf_write_value(client, W83781D_REG_TEMP_##REG(nr), \
+ data->temp_##reg##_add[nr-2]); \
+ } else { /* TEMP1 */ \
+ data->temp_##reg = TEMP_TO_REG(val); \
+ w83627hf_write_value(client, W83781D_REG_TEMP_##REG(nr), \
+ data->temp_##reg); \
+ } \
+ \
+ up(&data->update_lock); \
+ return count; \
+}
+store_temp_reg(OVER, max);
+store_temp_reg(HYST, max_hyst);
+
+#define sysfs_temp_offset(offset) \
+static ssize_t \
+show_regs_temp_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+ return show_temp(dev, buf, offset); \
+} \
+static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_regs_temp_##offset, NULL);
+
+#define sysfs_temp_reg_offset(reg, offset) \
+static ssize_t show_regs_temp_##reg##offset (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+ return show_temp_##reg (dev, buf, offset); \
+} \
+static ssize_t \
+store_regs_temp_##reg##offset (struct device *dev, struct device_attribute *attr, \
+ const char *buf, size_t count) \
+{ \
+ return store_temp_##reg (dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(temp##offset##_##reg, S_IRUGO| S_IWUSR, \
+ show_regs_temp_##reg##offset, store_regs_temp_##reg##offset);
+
+#define sysfs_temp_offsets(offset) \
+sysfs_temp_offset(offset) \
+sysfs_temp_reg_offset(max, offset) \
+sysfs_temp_reg_offset(max_hyst, offset)
+
+sysfs_temp_offsets(1);
+sysfs_temp_offsets(2);
+sysfs_temp_offsets(3);
+
+#define device_create_file_temp(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_temp##offset##_input); \
+device_create_file(&client->dev, &dev_attr_temp##offset##_max); \
+device_create_file(&client->dev, &dev_attr_temp##offset##_max_hyst); \
+} while (0)
+
+static ssize_t
+show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
+}
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
+#define device_create_file_vid(client) \
+device_create_file(&client->dev, &dev_attr_cpu0_vid)
+
+static ssize_t
+show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ return sprintf(buf, "%ld\n", (long) data->vrm);
+}
+static ssize_t
+store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83627hf_data *data = i2c_get_clientdata(client);
+ u32 val;
+
+ val = simple_strtoul(buf, NULL, 10);
+ data->vrm = val;
+
+ return count;
+}
+static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
+#define device_create_file_vrm(client) \
+device_create_file(&client->dev, &dev_attr_vrm)
+
+static ssize_t
+show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ return sprintf(buf, "%ld\n", (long) data->alarms);
+}
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
+#define device_create_file_alarms(client) \
+device_create_file(&client->dev, &dev_attr_alarms)
+
+#define show_beep_reg(REG, reg) \
+static ssize_t show_beep_##reg (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+ struct w83627hf_data *data = w83627hf_update_device(dev); \
+ return sprintf(buf,"%ld\n", \
+ (long)BEEP_##REG##_FROM_REG(data->beep_##reg)); \
+}
+show_beep_reg(ENABLE, enable)
+show_beep_reg(MASK, mask)
+
+#define BEEP_ENABLE 0 /* Store beep_enable */
+#define BEEP_MASK 1 /* Store beep_mask */
+
+static ssize_t
+store_beep_reg(struct device *dev, const char *buf, size_t count,
+ int update_mask)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83627hf_data *data = i2c_get_clientdata(client);
+ u32 val, val2;
+
+ val = simple_strtoul(buf, NULL, 10);
+
+ down(&data->update_lock);
+
+ if (update_mask == BEEP_MASK) { /* We are storing beep_mask */
+ data->beep_mask = BEEP_MASK_TO_REG(val);
+ w83627hf_write_value(client, W83781D_REG_BEEP_INTS1,
+ data->beep_mask & 0xff);
+ w83627hf_write_value(client, W83781D_REG_BEEP_INTS3,
+ ((data->beep_mask) >> 16) & 0xff);
+ val2 = (data->beep_mask >> 8) & 0x7f;
+ } else { /* We are storing beep_enable */
+ val2 =
+ w83627hf_read_value(client, W83781D_REG_BEEP_INTS2) & 0x7f;
+ data->beep_enable = BEEP_ENABLE_TO_REG(val);
+ }
+
+ w83627hf_write_value(client, W83781D_REG_BEEP_INTS2,
+ val2 | data->beep_enable << 7);
+
+ up(&data->update_lock);
+ return count;
+}
+
+#define sysfs_beep(REG, reg) \
+static ssize_t show_regs_beep_##reg (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+ return show_beep_##reg(dev, attr, buf); \
+} \
+static ssize_t \
+store_regs_beep_##reg (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
+{ \
+ return store_beep_reg(dev, buf, count, BEEP_##REG); \
+} \
+static DEVICE_ATTR(beep_##reg, S_IRUGO | S_IWUSR, \
+ show_regs_beep_##reg, store_regs_beep_##reg);
+
+sysfs_beep(ENABLE, enable);
+sysfs_beep(MASK, mask);
+
+#define device_create_file_beep(client) \
+do { \
+device_create_file(&client->dev, &dev_attr_beep_enable); \
+device_create_file(&client->dev, &dev_attr_beep_mask); \
+} while (0)
+
+static ssize_t
+show_fan_div_reg(struct device *dev, char *buf, int nr)
+{
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ return sprintf(buf, "%ld\n",
+ (long) DIV_FROM_REG(data->fan_div[nr - 1]));
+}
+
+/* Note: we save and restore the fan minimum here, because its value is
+ determined in part by the fan divisor. This follows the principle of
+ least suprise; the user doesn't expect the fan minimum to change just
+ because the divisor changed. */
+static ssize_t
+store_fan_div_reg(struct device *dev, const char *buf, size_t count, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83627hf_data *data = i2c_get_clientdata(client);
+ unsigned long min;
+ u8 reg;
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+
+ down(&data->update_lock);
+
+ /* Save fan_min */
+ min = FAN_FROM_REG(data->fan_min[nr],
+ DIV_FROM_REG(data->fan_div[nr]));
+
+ data->fan_div[nr] = DIV_TO_REG(val);
+
+ reg = (w83627hf_read_value(client, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV)
+ & (nr==0 ? 0xcf : 0x3f))
+ | ((data->fan_div[nr] & 0x03) << (nr==0 ? 4 : 6));
+ w83627hf_write_value(client, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg);
+
+ reg = (w83627hf_read_value(client, W83781D_REG_VBAT)
+ & ~(1 << (5 + nr)))
+ | ((data->fan_div[nr] & 0x04) << (3 + nr));
+ w83627hf_write_value(client, W83781D_REG_VBAT, reg);
+
+ /* Restore fan_min */
+ data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
+ w83627hf_write_value(client, W83781D_REG_FAN_MIN(nr+1), data->fan_min[nr]);
+
+ up(&data->update_lock);
+ return count;
+}
+
+#define sysfs_fan_div(offset) \
+static ssize_t show_regs_fan_div_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+ return show_fan_div_reg(dev, buf, offset); \
+} \
+static ssize_t \
+store_regs_fan_div_##offset (struct device *dev, struct device_attribute *attr, \
+ const char *buf, size_t count) \
+{ \
+ return store_fan_div_reg(dev, buf, count, offset - 1); \
+} \
+static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
+ show_regs_fan_div_##offset, store_regs_fan_div_##offset);
+
+sysfs_fan_div(1);
+sysfs_fan_div(2);
+sysfs_fan_div(3);
+
+#define device_create_file_fan_div(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_fan##offset##_div); \
+} while (0)
+
+static ssize_t
+show_pwm_reg(struct device *dev, char *buf, int nr)
+{
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ return sprintf(buf, "%ld\n", (long) data->pwm[nr - 1]);
+}
+
+static ssize_t
+store_pwm_reg(struct device *dev, const char *buf, size_t count, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83627hf_data *data = i2c_get_clientdata(client);
+ u32 val;
+
+ val = simple_strtoul(buf, NULL, 10);
+
+ down(&data->update_lock);
+
+ if (data->type == w83627thf) {
+ /* bits 0-3 are reserved in 627THF */
+ data->pwm[nr - 1] = PWM_TO_REG(val) & 0xf0;
+ w83627hf_write_value(client,
+ W836X7HF_REG_PWM(data->type, nr),
+ data->pwm[nr - 1] |
+ (w83627hf_read_value(client,
+ W836X7HF_REG_PWM(data->type, nr)) & 0x0f));
+ } else {
+ data->pwm[nr - 1] = PWM_TO_REG(val);
+ w83627hf_write_value(client,
+ W836X7HF_REG_PWM(data->type, nr),
+ data->pwm[nr - 1]);
+ }
+
+ up(&data->update_lock);
+ return count;
+}
+
+#define sysfs_pwm(offset) \
+static ssize_t show_regs_pwm_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+ return show_pwm_reg(dev, buf, offset); \
+} \
+static ssize_t \
+store_regs_pwm_##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
+{ \
+ return store_pwm_reg(dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
+ show_regs_pwm_##offset, store_regs_pwm_##offset);
+
+sysfs_pwm(1);
+sysfs_pwm(2);
+sysfs_pwm(3);
+
+#define device_create_file_pwm(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_pwm##offset); \
+} while (0)
+
+static ssize_t
+show_sensor_reg(struct device *dev, char *buf, int nr)
+{
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ return sprintf(buf, "%ld\n", (long) data->sens[nr - 1]);
+}
+
+static ssize_t
+store_sensor_reg(struct device *dev, const char *buf, size_t count, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83627hf_data *data = i2c_get_clientdata(client);
+ u32 val, tmp;
+
+ val = simple_strtoul(buf, NULL, 10);
+
+ down(&data->update_lock);
+
+ switch (val) {
+ case 1: /* PII/Celeron diode */
+ tmp = w83627hf_read_value(client, W83781D_REG_SCFG1);
+ w83627hf_write_value(client, W83781D_REG_SCFG1,
+ tmp | BIT_SCFG1[nr - 1]);
+ tmp = w83627hf_read_value(client, W83781D_REG_SCFG2);
+ w83627hf_write_value(client, W83781D_REG_SCFG2,
+ tmp | BIT_SCFG2[nr - 1]);
+ data->sens[nr - 1] = val;
+ break;
+ case 2: /* 3904 */
+ tmp = w83627hf_read_value(client, W83781D_REG_SCFG1);
+ w83627hf_write_value(client, W83781D_REG_SCFG1,
+ tmp | BIT_SCFG1[nr - 1]);
+ tmp = w83627hf_read_value(client, W83781D_REG_SCFG2);
+ w83627hf_write_value(client, W83781D_REG_SCFG2,
+ tmp & ~BIT_SCFG2[nr - 1]);
+ data->sens[nr - 1] = val;
+ break;
+ case W83781D_DEFAULT_BETA: /* thermistor */
+ tmp = w83627hf_read_value(client, W83781D_REG_SCFG1);
+ w83627hf_write_value(client, W83781D_REG_SCFG1,
+ tmp & ~BIT_SCFG1[nr - 1]);
+ data->sens[nr - 1] = val;
+ break;
+ default:
+ dev_err(&client->dev,
+ "Invalid sensor type %ld; must be 1, 2, or %d\n",
+ (long) val, W83781D_DEFAULT_BETA);
+ break;
+ }
+
+ up(&data->update_lock);
+ return count;
+}
+
+#define sysfs_sensor(offset) \
+static ssize_t show_regs_sensor_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+ return show_sensor_reg(dev, buf, offset); \
+} \
+static ssize_t \
+store_regs_sensor_##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
+{ \
+ return store_sensor_reg(dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, \
+ show_regs_sensor_##offset, store_regs_sensor_##offset);
+
+sysfs_sensor(1);
+sysfs_sensor(2);
+sysfs_sensor(3);
+
+#define device_create_file_sensor(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_temp##offset##_type); \
+} while (0)
+
+
+/* This function is called when:
+ * w83627hf_driver is inserted (when this module is loaded), for each
+ available adapter
+ * when a new adapter is inserted (and w83627hf_driver is still present) */
+static int w83627hf_attach_adapter(struct i2c_adapter *adapter)
+{
+ return i2c_detect(adapter, &addr_data, w83627hf_detect);
+}
+
+static int w83627hf_find(int sioaddr, int *address)
+{
+ u16 val;
+
+ REG = sioaddr;
+ VAL = sioaddr + 1;
+
+ superio_enter();
+ val= superio_inb(DEVID);
+ if(val != W627_DEVID &&
+ val != W627THF_DEVID &&
+ val != W697_DEVID &&
+ val != W637_DEVID) {
+ superio_exit();
+ return -ENODEV;
+ }
+
+ superio_select(W83627HF_LD_HWM);
+ val = (superio_inb(WINB_BASE_REG) << 8) |
+ superio_inb(WINB_BASE_REG + 1);
+ *address = val & ~(WINB_EXTENT - 1);
+ if (*address == 0 && force_addr == 0) {
+ superio_exit();
+ return -ENODEV;
+ }
+ if (force_addr)
+ *address = force_addr; /* so detect will get called */
+
+ superio_exit();
+ return 0;
+}
+
+int w83627hf_detect(struct i2c_adapter *adapter, int address,
+ int kind)
+{
+ int val;
+ struct i2c_client *new_client;
+ struct w83627hf_data *data;
+ int err = 0;
+ const char *client_name = "";
+
+ if (!i2c_is_isa_adapter(adapter)) {
+ err = -ENODEV;
+ goto ERROR0;
+ }
+
+ if(force_addr)
+ address = force_addr & ~(WINB_EXTENT - 1);
+
+ if (!request_region(address, WINB_EXTENT, w83627hf_driver.name)) {
+ err = -EBUSY;
+ goto ERROR0;
+ }
+
+ if(force_addr) {
+ printk("w83627hf.o: forcing ISA address 0x%04X\n", address);
+ superio_enter();
+ superio_select(W83627HF_LD_HWM);
+ superio_outb(WINB_BASE_REG, address >> 8);
+ superio_outb(WINB_BASE_REG+1, address & 0xff);
+ superio_exit();
+ }
+
+ superio_enter();
+ val= superio_inb(DEVID);
+ if(val == W627_DEVID)
+ kind = w83627hf;
+ else if(val == W697_DEVID)
+ kind = w83697hf;
+ else if(val == W627THF_DEVID)
+ kind = w83627thf;
+ else if(val == W637_DEVID)
+ kind = w83637hf;
+ else {
+ dev_info(&adapter->dev,
+ "Unsupported chip (dev_id=0x%02X).\n", val);
+ goto ERROR1;
+ }
+
+ superio_select(W83627HF_LD_HWM);
+ if((val = 0x01 & superio_inb(WINB_ACT_REG)) == 0)
+ superio_outb(WINB_ACT_REG, 1);
+ superio_exit();
+
+ /* OK. For now, we presume we have a valid client. We now create the
+ client structure, even though we cannot fill it completely yet.
+ But it allows us to access w83627hf_{read,write}_value. */
+
+ if (!(data = kmalloc(sizeof(struct w83627hf_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto ERROR1;
+ }
+ memset(data, 0, sizeof(struct w83627hf_data));
+
+ new_client = &data->client;
+ i2c_set_clientdata(new_client, data);
+ new_client->addr = address;
+ init_MUTEX(&data->lock);
+ new_client->adapter = adapter;
+ new_client->driver = &w83627hf_driver;
+ new_client->flags = 0;
+
+
+ if (kind == w83627hf) {
+ client_name = "w83627hf";
+ } else if (kind == w83627thf) {
+ client_name = "w83627thf";
+ } else if (kind == w83697hf) {
+ client_name = "w83697hf";
+ } else if (kind == w83637hf) {
+ client_name = "w83637hf";
+ }
+
+ /* Fill in the remaining client fields and put into the global list */
+ strlcpy(new_client->name, client_name, I2C_NAME_SIZE);
+ data->type = kind;
+ data->valid = 0;
+ init_MUTEX(&data->update_lock);
+
+ /* Tell the I2C layer a new client has arrived */
+ if ((err = i2c_attach_client(new_client)))
+ goto ERROR2;
+
+ data->lm75 = NULL;
+
+ /* Initialize the chip */
+ w83627hf_init_client(new_client);
+
+ /* A few vars need to be filled upon startup */
+ data->fan_min[0] = w83627hf_read_value(new_client, W83781D_REG_FAN_MIN(1));
+ data->fan_min[1] = w83627hf_read_value(new_client, W83781D_REG_FAN_MIN(2));
+ data->fan_min[2] = w83627hf_read_value(new_client, W83781D_REG_FAN_MIN(3));
+
+ /* Register sysfs hooks */
+ device_create_file_in(new_client, 0);
+ if (kind != w83697hf)
+ device_create_file_in(new_client, 1);
+ device_create_file_in(new_client, 2);
+ device_create_file_in(new_client, 3);
+ device_create_file_in(new_client, 4);
+ if (kind != w83627thf && kind != w83637hf) {
+ device_create_file_in(new_client, 5);
+ device_create_file_in(new_client, 6);
+ }
+ device_create_file_in(new_client, 7);
+ device_create_file_in(new_client, 8);
+
+ device_create_file_fan(new_client, 1);
+ device_create_file_fan(new_client, 2);
+ if (kind != w83697hf)
+ device_create_file_fan(new_client, 3);
+
+ device_create_file_temp(new_client, 1);
+ device_create_file_temp(new_client, 2);
+ if (kind != w83697hf)
+ device_create_file_temp(new_client, 3);
+
+ if (kind != w83697hf)
+ device_create_file_vid(new_client);
+
+ if (kind != w83697hf)
+ device_create_file_vrm(new_client);
+
+ device_create_file_fan_div(new_client, 1);
+ device_create_file_fan_div(new_client, 2);
+ if (kind != w83697hf)
+ device_create_file_fan_div(new_client, 3);
+
+ device_create_file_alarms(new_client);
+
+ device_create_file_beep(new_client);
+
+ device_create_file_pwm(new_client, 1);
+ device_create_file_pwm(new_client, 2);
+ if (kind == w83627thf || kind == w83637hf)
+ device_create_file_pwm(new_client, 3);
+
+ device_create_file_sensor(new_client, 1);
+ device_create_file_sensor(new_client, 2);
+ if (kind != w83697hf)
+ device_create_file_sensor(new_client, 3);
+
+ return 0;
+
+ ERROR2:
+ kfree(data);
+ ERROR1:
+ release_region(address, WINB_EXTENT);
+ ERROR0:
+ return err;
+}
+
+static int w83627hf_detach_client(struct i2c_client *client)
+{
+ int err;
+
+ if ((err = i2c_detach_client(client))) {
+ dev_err(&client->dev,
+ "Client deregistration failed, client not detached.\n");
+ return err;
+ }
+
+ release_region(client->addr, WINB_EXTENT);
+ kfree(i2c_get_clientdata(client));
+
+ return 0;
+}
+
+
+/*
+ ISA access must always be locked explicitly!
+ We ignore the W83781D BUSY flag at this moment - it could lead to deadlocks,
+ would slow down the W83781D access and should not be necessary.
+ There are some ugly typecasts here, but the good news is - they should
+ nowhere else be necessary! */
+static int w83627hf_read_value(struct i2c_client *client, u16 reg)
+{
+ struct w83627hf_data *data = i2c_get_clientdata(client);
+ int res, word_sized;
+
+ down(&data->lock);
+ word_sized = (((reg & 0xff00) == 0x100)
+ || ((reg & 0xff00) == 0x200))
+ && (((reg & 0x00ff) == 0x50)
+ || ((reg & 0x00ff) == 0x53)
+ || ((reg & 0x00ff) == 0x55));
+ if (reg & 0xff00) {
+ outb_p(W83781D_REG_BANK,
+ client->addr + W83781D_ADDR_REG_OFFSET);
+ outb_p(reg >> 8,
+ client->addr + W83781D_DATA_REG_OFFSET);
+ }
+ outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET);
+ res = inb_p(client->addr + W83781D_DATA_REG_OFFSET);
+ if (word_sized) {
+ outb_p((reg & 0xff) + 1,
+ client->addr + W83781D_ADDR_REG_OFFSET);
+ res =
+ (res << 8) + inb_p(client->addr +
+ W83781D_DATA_REG_OFFSET);
+ }
+ if (reg & 0xff00) {
+ outb_p(W83781D_REG_BANK,
+ client->addr + W83781D_ADDR_REG_OFFSET);
+ outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
+ }
+ up(&data->lock);
+ return res;
+}
+
+static int w83627thf_read_gpio5(struct i2c_client *client)
+{
+ int res = 0xff, sel;
+
+ superio_enter();
+ superio_select(W83627HF_LD_GPIO5);
+
+ /* Make sure these GPIO pins are enabled */
+ if (!(superio_inb(W83627THF_GPIO5_EN) & (1<<3))) {
+ dev_dbg(&client->dev, "GPIO5 disabled, no VID function\n");
+ goto exit;
+ }
+
+ /* Make sure the pins are configured for input
+ There must be at least five (VRM 9), and possibly 6 (VRM 10) */
+ sel = superio_inb(W83627THF_GPIO5_IOSR);
+ if ((sel & 0x1f) != 0x1f) {
+ dev_dbg(&client->dev, "GPIO5 not configured for VID "
+ "function\n");
+ goto exit;
+ }
+
+ dev_info(&client->dev, "Reading VID from GPIO5\n");
+ res = superio_inb(W83627THF_GPIO5_DR) & sel;
+
+exit:
+ superio_exit();
+ return res;
+}
+
+static int w83627hf_write_value(struct i2c_client *client, u16 reg, u16 value)
+{
+ struct w83627hf_data *data = i2c_get_clientdata(client);
+ int word_sized;
+
+ down(&data->lock);
+ word_sized = (((reg & 0xff00) == 0x100)
+ || ((reg & 0xff00) == 0x200))
+ && (((reg & 0x00ff) == 0x53)
+ || ((reg & 0x00ff) == 0x55));
+ if (reg & 0xff00) {
+ outb_p(W83781D_REG_BANK,
+ client->addr + W83781D_ADDR_REG_OFFSET);
+ outb_p(reg >> 8,
+ client->addr + W83781D_DATA_REG_OFFSET);
+ }
+ outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET);
+ if (word_sized) {
+ outb_p(value >> 8,
+ client->addr + W83781D_DATA_REG_OFFSET);
+ outb_p((reg & 0xff) + 1,
+ client->addr + W83781D_ADDR_REG_OFFSET);
+ }
+ outb_p(value & 0xff,
+ client->addr + W83781D_DATA_REG_OFFSET);
+ if (reg & 0xff00) {
+ outb_p(W83781D_REG_BANK,
+ client->addr + W83781D_ADDR_REG_OFFSET);
+ outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
+ }
+ up(&data->lock);
+ return 0;
+}
+
+/* Called when we have found a new W83781D. It should set limits, etc. */
+static void w83627hf_init_client(struct i2c_client *client)
+{
+ struct w83627hf_data *data = i2c_get_clientdata(client);
+ int i;
+ int type = data->type;
+ u8 tmp;
+
+ if(init) {
+ /* save this register */
+ i = w83627hf_read_value(client, W83781D_REG_BEEP_CONFIG);
+ /* Reset all except Watchdog values and last conversion values
+ This sets fan-divs to 2, among others */
+ w83627hf_write_value(client, W83781D_REG_CONFIG, 0x80);
+ /* Restore the register and disable power-on abnormal beep.
+ This saves FAN 1/2/3 input/output values set by BIOS. */
+ w83627hf_write_value(client, W83781D_REG_BEEP_CONFIG, i | 0x80);
+ /* Disable master beep-enable (reset turns it on).
+ Individual beeps should be reset to off but for some reason
+ disabling this bit helps some people not get beeped */
+ w83627hf_write_value(client, W83781D_REG_BEEP_INTS2, 0);
+ }
+
+ /* Minimize conflicts with other winbond i2c-only clients... */
+ /* disable i2c subclients... how to disable main i2c client?? */
+ /* force i2c address to relatively uncommon address */
+ w83627hf_write_value(client, W83781D_REG_I2C_SUBADDR, 0x89);
+ w83627hf_write_value(client, W83781D_REG_I2C_ADDR, force_i2c);
+
+ /* Read VID only once */
+ if (w83627hf == data->type || w83637hf == data->type) {
+ int lo = w83627hf_read_value(client, W83781D_REG_VID_FANDIV);
+ int hi = w83627hf_read_value(client, W83781D_REG_CHIPID);
+ data->vid = (lo & 0x0f) | ((hi & 0x01) << 4);
+ } else if (w83627thf == data->type) {
+ data->vid = w83627thf_read_gpio5(client) & 0x3f;
+ }
+
+ /* Read VRM & OVT Config only once */
+ if (w83627thf == data->type || w83637hf == data->type) {
+ data->vrm_ovt =
+ w83627hf_read_value(client, W83627THF_REG_VRM_OVT_CFG);
+ data->vrm = (data->vrm_ovt & 0x01) ? 90 : 82;
+ } else {
+ /* Convert VID to voltage based on default VRM */
+ data->vrm = i2c_which_vrm();
+ }
+
+ tmp = w83627hf_read_value(client, W83781D_REG_SCFG1);
+ for (i = 1; i <= 3; i++) {
+ if (!(tmp & BIT_SCFG1[i - 1])) {
+ data->sens[i - 1] = W83781D_DEFAULT_BETA;
+ } else {
+ if (w83627hf_read_value
+ (client,
+ W83781D_REG_SCFG2) & BIT_SCFG2[i - 1])
+ data->sens[i - 1] = 1;
+ else
+ data->sens[i - 1] = 2;
+ }
+ if ((type == w83697hf) && (i == 2))
+ break;
+ }
+
+ if(init) {
+ /* Enable temp2 */
+ tmp = w83627hf_read_value(client, W83781D_REG_TEMP2_CONFIG);
+ if (tmp & 0x01) {
+ dev_warn(&client->dev, "Enabling temp2, readings "
+ "might not make sense\n");
+ w83627hf_write_value(client, W83781D_REG_TEMP2_CONFIG,
+ tmp & 0xfe);
+ }
+
+ /* Enable temp3 */
+ if (type != w83697hf) {
+ tmp = w83627hf_read_value(client,
+ W83781D_REG_TEMP3_CONFIG);
+ if (tmp & 0x01) {
+ dev_warn(&client->dev, "Enabling temp3, "
+ "readings might not make sense\n");
+ w83627hf_write_value(client,
+ W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
+ }
+ }
+
+ if (type == w83627hf) {
+ /* enable PWM2 control (can't hurt since PWM reg
+ should have been reset to 0xff) */
+ w83627hf_write_value(client, W83627HF_REG_PWMCLK12,
+ 0x19);
+ }
+ /* enable comparator mode for temp2 and temp3 so
+ alarm indication will work correctly */
+ i = w83627hf_read_value(client, W83781D_REG_IRQ);
+ if (!(i & 0x40))
+ w83627hf_write_value(client, W83781D_REG_IRQ,
+ i | 0x40);
+ }
+
+ /* Start monitoring */
+ w83627hf_write_value(client, W83781D_REG_CONFIG,
+ (w83627hf_read_value(client,
+ W83781D_REG_CONFIG) & 0xf7)
+ | 0x01);
+}
+
+static struct w83627hf_data *w83627hf_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83627hf_data *data = i2c_get_clientdata(client);
+ int i;
+
+ down(&data->update_lock);
+
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
+ for (i = 0; i <= 8; i++) {
+ /* skip missing sensors */
+ if (((data->type == w83697hf) && (i == 1)) ||
+ ((data->type == w83627thf || data->type == w83637hf)
+ && (i == 4 || i == 5)))
+ continue;
+ data->in[i] =
+ w83627hf_read_value(client, W83781D_REG_IN(i));
+ data->in_min[i] =
+ w83627hf_read_value(client,
+ W83781D_REG_IN_MIN(i));
+ data->in_max[i] =
+ w83627hf_read_value(client,
+ W83781D_REG_IN_MAX(i));
+ }
+ for (i = 1; i <= 3; i++) {
+ data->fan[i - 1] =
+ w83627hf_read_value(client, W83781D_REG_FAN(i));
+ data->fan_min[i - 1] =
+ w83627hf_read_value(client,
+ W83781D_REG_FAN_MIN(i));
+ }
+ for (i = 1; i <= 3; i++) {
+ u8 tmp = w83627hf_read_value(client,
+ W836X7HF_REG_PWM(data->type, i));
+ /* bits 0-3 are reserved in 627THF */
+ if (data->type == w83627thf)
+ tmp &= 0xf0;
+ data->pwm[i - 1] = tmp;
+ if(i == 2 &&
+ (data->type == w83627hf || data->type == w83697hf))
+ break;
+ }
+
+ data->temp = w83627hf_read_value(client, W83781D_REG_TEMP(1));
+ data->temp_max =
+ w83627hf_read_value(client, W83781D_REG_TEMP_OVER(1));
+ data->temp_max_hyst =
+ w83627hf_read_value(client, W83781D_REG_TEMP_HYST(1));
+ data->temp_add[0] =
+ w83627hf_read_value(client, W83781D_REG_TEMP(2));
+ data->temp_max_add[0] =
+ w83627hf_read_value(client, W83781D_REG_TEMP_OVER(2));
+ data->temp_max_hyst_add[0] =
+ w83627hf_read_value(client, W83781D_REG_TEMP_HYST(2));
+ if (data->type != w83697hf) {
+ data->temp_add[1] =
+ w83627hf_read_value(client, W83781D_REG_TEMP(3));
+ data->temp_max_add[1] =
+ w83627hf_read_value(client, W83781D_REG_TEMP_OVER(3));
+ data->temp_max_hyst_add[1] =
+ w83627hf_read_value(client, W83781D_REG_TEMP_HYST(3));
+ }
+
+ i = w83627hf_read_value(client, W83781D_REG_VID_FANDIV);
+ data->fan_div[0] = (i >> 4) & 0x03;
+ data->fan_div[1] = (i >> 6) & 0x03;
+ if (data->type != w83697hf) {
+ data->fan_div[2] = (w83627hf_read_value(client,
+ W83781D_REG_PIN) >> 6) & 0x03;
+ }
+ i = w83627hf_read_value(client, W83781D_REG_VBAT);
+ data->fan_div[0] |= (i >> 3) & 0x04;
+ data->fan_div[1] |= (i >> 4) & 0x04;
+ if (data->type != w83697hf)
+ data->fan_div[2] |= (i >> 5) & 0x04;
+ data->alarms =
+ w83627hf_read_value(client, W83781D_REG_ALARM1) |
+ (w83627hf_read_value(client, W83781D_REG_ALARM2) << 8) |
+ (w83627hf_read_value(client, W83781D_REG_ALARM3) << 16);
+ i = w83627hf_read_value(client, W83781D_REG_BEEP_INTS2);
+ data->beep_enable = i >> 7;
+ data->beep_mask = ((i & 0x7f) << 8) |
+ w83627hf_read_value(client, W83781D_REG_BEEP_INTS1) |
+ w83627hf_read_value(client, W83781D_REG_BEEP_INTS3) << 16;
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+
+ up(&data->update_lock);
+
+ return data;
+}
+
+static int __init sensors_w83627hf_init(void)
+{
+ int addr;
+
+ if (w83627hf_find(0x2e, &addr)
+ && w83627hf_find(0x4e, &addr)) {
+ return -ENODEV;
+ }
+ normal_isa[0] = addr;
+
+ return i2c_add_driver(&w83627hf_driver);
+}
+
+static void __exit sensors_w83627hf_exit(void)
+{
+ i2c_del_driver(&w83627hf_driver);
+}
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
+ "Philip Edelbrock <phil@netroedge.com>, "
+ "and Mark Studebaker <mdsxyz123@yahoo.com>");
+MODULE_DESCRIPTION("W83627HF driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_w83627hf_init);
+module_exit(sensors_w83627hf_exit);
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 07:43:08 +0000