diff options
Diffstat (limited to 'drivers/i2c/algos/i2c-algo-ite.h')
| -rw-r--r-- | drivers/i2c/algos/i2c-algo-ite.h | 117 |
1 files changed, 0 insertions, 117 deletions
diff --git a/drivers/i2c/algos/i2c-algo-ite.h b/drivers/i2c/algos/i2c-algo-ite.h deleted file mode 100644 index a8ca3c9b546..00000000000 --- a/drivers/i2c/algos/i2c-algo-ite.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - -------------------------------------------------------------------- - i2c-ite.h: Global defines for the I2C controller on board the - ITE MIPS processor. - -------------------------------------------------------------------- - Hai-Pao Fan, MontaVista Software, Inc. - hpfan@mvista.com or source@mvista.com - - Copyright 2001 MontaVista Software Inc. - - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - - */ - -#ifndef I2C_ITE_H -#define I2C_ITE_H 1 - -#include <asm/it8172/it8172.h> - -/* I2C Registers */ -#define ITE_I2CHCR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x30 -#define ITE_I2CHSR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x34 -#define ITE_I2CSAR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x38 -#define ITE_I2CSSAR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x3c -#define ITE_I2CCKCNT IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x48 -#define ITE_I2CSHDR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x4c -#define ITE_I2CRSUR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x50 -#define ITE_I2CPSUR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x54 - -#define ITE_I2CFDR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x70 -#define ITE_I2CFBCR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x74 -#define ITE_I2CFCR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x78 -#define ITE_I2CFSR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x7c - - -/* Host Control Register ITE_I2CHCR */ -#define ITE_I2CHCR_HCE 0x01 /* Enable I2C Host Controller */ -#define ITE_I2CHCR_IE 0x02 /* Enable the interrupt after completing - the current transaction */ -#define ITE_I2CHCR_CP_W 0x00 /* bit2-4 000 - Write */ -#define ITE_I2CHCR_CP_R 0x08 /* 010 - Current address read */ -#define ITE_I2CHCR_CP_S 0x10 /* 100 - Sequential read */ -#define ITE_I2CHCR_ST 0x20 /* Initiates the I2C host controller to execute - the command and send the data programmed in - all required registers to I2C bus */ -#define ITE_CMD ITE_I2CHCR_HCE | ITE_I2CHCR_IE | ITE_I2CHCR_ST -#define ITE_WRITE ITE_CMD | ITE_I2CHCR_CP_W -#define ITE_READ ITE_CMD | ITE_I2CHCR_CP_R -#define ITE_SREAD ITE_CMD | ITE_I2CHCR_CP_S - -/* Host Status Register ITE_I2CHSR */ -#define ITE_I2CHSR_DB 0x01 /* Device is busy, receives NACK response except - in the first and last bytes */ -#define ITE_I2CHSR_DNE 0x02 /* Target address on I2C bus does not exist */ -#define ITE_I2CHSR_TDI 0x04 /* R/W Transaction on I2C bus was completed */ -#define ITE_I2CHSR_HB 0x08 /* Host controller is processing transactions */ -#define ITE_I2CHSR_FER 0x10 /* Error occurs in the FIFO */ - -/* Slave Address Register ITE_I2CSAR */ -#define ITE_I2CSAR_SA_MASK 0xfe /* Target I2C device address */ -#define ITE_I2CSAR_ASO 0x0100 /* Output 1/0 to I2CAS port when the - next slave address is addressed */ - -/* Slave Sub-address Register ITE_I2CSSAR */ -#define ITE_I2CSSAR_SUBA_MASK 0xff /* Target I2C device sub-address */ - -/* Clock Counter Register ITE_I2CCKCNT */ -#define ITE_I2CCKCNT_STOP 0x00 /* stop I2C clock */ -#define ITE_I2CCKCNT_HPCC_MASK 0x7f /* SCL high period counter */ -#define ITE_I2CCKCNT_LPCC_MASK 0x7f00 /* SCL low period counter */ - -/* START Hold Time Register ITE_I2CSHDR */ -/* value is counted based on 16 MHz internal clock */ -#define ITE_I2CSHDR_FM 0x0a /* START condition at fast mode */ -#define ITE_I2CSHDR_SM 0x47 /* START contition at standard mode */ - -/* (Repeated) START Setup Time Register ITE_I2CRSUR */ -/* value is counted based on 16 MHz internal clock */ -#define ITE_I2CRSUR_FM 0x0a /* repeated START condition at fast mode */ -#define ITE_I2CRSUR_SM 0x50 /* repeated START condition at standard mode */ - -/* STOP setup Time Register ITE_I2CPSUR */ - -/* FIFO Data Register ITE_I2CFDR */ -#define ITE_I2CFDR_MASK 0xff - -/* FIFO Byte Count Register ITE_I2CFBCR */ -#define ITE_I2CFBCR_MASK 0x3f - -/* FIFO Control Register ITE_I2CFCR */ -#define ITE_I2CFCR_FLUSH 0x01 /* Flush FIFO and reset the FIFO point - and I2CFSR */ -/* FIFO Status Register ITE_I2CFSR */ -#define ITE_I2CFSR_FO 0x01 /* FIFO is overrun when write */ -#define ITE_I2CFSR_FU 0x02 /* FIFO is underrun when read */ -#define ITE_I2CFSR_FF 0x04 /* FIFO is full when write */ -#define ITE_I2CFSR_FE 0x08 /* FIFO is empty when read */ - -#endif /* I2C_ITE_H */ |