diff options
Diffstat (limited to 'drivers/i2c/chips/lm63.c')
| -rw-r--r-- | drivers/i2c/chips/lm63.c | 597 |
1 files changed, 0 insertions, 597 deletions
diff --git a/drivers/i2c/chips/lm63.c b/drivers/i2c/chips/lm63.c deleted file mode 100644 index 7c6f9ea5a25..00000000000 --- a/drivers/i2c/chips/lm63.c +++ /dev/null @@ -1,597 +0,0 @@ -/* - * lm63.c - driver for the National Semiconductor LM63 temperature sensor - * with integrated fan control - * Copyright (C) 2004-2005 Jean Delvare <khali@linux-fr.org> - * Based on the lm90 driver. - * - * The LM63 is a sensor chip made by National Semiconductor. It measures - * two temperatures (its own and one external one) and the speed of one - * fan, those speed it can additionally control. Complete datasheet can be - * obtained from National's website at: - * http://www.national.com/pf/LM/LM63.html - * - * The LM63 is basically an LM86 with fan speed monitoring and control - * capabilities added. It misses some of the LM86 features though: - * - No low limit for local temperature. - * - No critical limit for local temperature. - * - Critical limit for remote temperature can be changed only once. We - * will consider that the critical limit is read-only. - * - * The datasheet isn't very clear about what the tachometer reading is. - * I had a explanation from National Semiconductor though. The two lower - * bits of the read value have to be masked out. The value is still 16 bit - * in width. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> -#include <linux/hwmon-sysfs.h> - -/* - * Addresses to scan - * Address is fully defined internally and cannot be changed. - */ - -static unsigned short normal_i2c[] = { 0x4c, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; - -/* - * Insmod parameters - */ - -SENSORS_INSMOD_1(lm63); - -/* - * The LM63 registers - */ - -#define LM63_REG_CONFIG1 0x03 -#define LM63_REG_CONFIG2 0xBF -#define LM63_REG_CONFIG_FAN 0x4A - -#define LM63_REG_TACH_COUNT_MSB 0x47 -#define LM63_REG_TACH_COUNT_LSB 0x46 -#define LM63_REG_TACH_LIMIT_MSB 0x49 -#define LM63_REG_TACH_LIMIT_LSB 0x48 - -#define LM63_REG_PWM_VALUE 0x4C -#define LM63_REG_PWM_FREQ 0x4D - -#define LM63_REG_LOCAL_TEMP 0x00 -#define LM63_REG_LOCAL_HIGH 0x05 - -#define LM63_REG_REMOTE_TEMP_MSB 0x01 -#define LM63_REG_REMOTE_TEMP_LSB 0x10 -#define LM63_REG_REMOTE_OFFSET_MSB 0x11 -#define LM63_REG_REMOTE_OFFSET_LSB 0x12 -#define LM63_REG_REMOTE_HIGH_MSB 0x07 -#define LM63_REG_REMOTE_HIGH_LSB 0x13 -#define LM63_REG_REMOTE_LOW_MSB 0x08 -#define LM63_REG_REMOTE_LOW_LSB 0x14 -#define LM63_REG_REMOTE_TCRIT 0x19 -#define LM63_REG_REMOTE_TCRIT_HYST 0x21 - -#define LM63_REG_ALERT_STATUS 0x02 -#define LM63_REG_ALERT_MASK 0x16 - -#define LM63_REG_MAN_ID 0xFE -#define LM63_REG_CHIP_ID 0xFF - -/* - * Conversions and various macros - * For tachometer counts, the LM63 uses 16-bit values. - * For local temperature and high limit, remote critical limit and hysteresis - * value, it uses signed 8-bit values with LSB = 1 degree Celsius. - * For remote temperature, low and high limits, it uses signed 11-bit values - * with LSB = 0.125 degree Celsius, left-justified in 16-bit registers. - */ - -#define FAN_FROM_REG(reg) ((reg) == 0xFFFC || (reg) == 0 ? 0 : \ - 5400000 / (reg)) -#define FAN_TO_REG(val) ((val) <= 82 ? 0xFFFC : \ - (5400000 / (val)) & 0xFFFC) -#define TEMP8_FROM_REG(reg) ((reg) * 1000) -#define TEMP8_TO_REG(val) ((val) <= -128000 ? -128 : \ - (val) >= 127000 ? 127 : \ - (val) < 0 ? ((val) - 500) / 1000 : \ - ((val) + 500) / 1000) -#define TEMP11_FROM_REG(reg) ((reg) / 32 * 125) -#define TEMP11_TO_REG(val) ((val) <= -128000 ? 0x8000 : \ - (val) >= 127875 ? 0x7FE0 : \ - (val) < 0 ? ((val) - 62) / 125 * 32 : \ - ((val) + 62) / 125 * 32) -#define HYST_TO_REG(val) ((val) <= 0 ? 0 : \ - (val) >= 127000 ? 127 : \ - ((val) + 500) / 1000) - -/* - * Functions declaration - */ - -static int lm63_attach_adapter(struct i2c_adapter *adapter); -static int lm63_detach_client(struct i2c_client *client); - -static struct lm63_data *lm63_update_device(struct device *dev); - -static int lm63_detect(struct i2c_adapter *adapter, int address, int kind); -static void lm63_init_client(struct i2c_client *client); - -/* - * Driver data (common to all clients) - */ - -static struct i2c_driver lm63_driver = { - .owner = THIS_MODULE, - .name = "lm63", - .flags = I2C_DF_NOTIFY, - .attach_adapter = lm63_attach_adapter, - .detach_client = lm63_detach_client, -}; - -/* - * Client data (each client gets its own) - */ - -struct lm63_data { - struct i2c_client client; - struct semaphore update_lock; - char valid; /* zero until following fields are valid */ - unsigned long last_updated; /* in jiffies */ - - /* registers values */ - u8 config, config_fan; - u16 fan[2]; /* 0: input - 1: low limit */ - u8 pwm1_freq; - u8 pwm1_value; - s8 temp8[3]; /* 0: local input - 1: local high limit - 2: remote critical limit */ - s16 temp11[3]; /* 0: remote input - 1: remote low limit - 2: remote high limit */ - u8 temp2_crit_hyst; - u8 alarms; -}; - -/* - * Sysfs callback functions and files - */ - -static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct lm63_data *data = lm63_update_device(dev); - return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr->index])); -} - -static ssize_t set_fan(struct device *dev, struct device_attribute *dummy, - const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm63_data *data = i2c_get_clientdata(client); - unsigned long val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - data->fan[1] = FAN_TO_REG(val); - i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_LSB, - data->fan[1] & 0xFF); - i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_MSB, - data->fan[1] >> 8); - up(&data->update_lock); - return count; -} - -static ssize_t show_pwm1(struct device *dev, struct device_attribute *dummy, - char *buf) -{ - struct lm63_data *data = lm63_update_device(dev); - return sprintf(buf, "%d\n", data->pwm1_value >= 2 * data->pwm1_freq ? - 255 : (data->pwm1_value * 255 + data->pwm1_freq) / - (2 * data->pwm1_freq)); -} - -static ssize_t set_pwm1(struct device *dev, struct device_attribute *dummy, - const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm63_data *data = i2c_get_clientdata(client); - unsigned long val; - - if (!(data->config_fan & 0x20)) /* register is read-only */ - return -EPERM; - - val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); - data->pwm1_value = val <= 0 ? 0 : - val >= 255 ? 2 * data->pwm1_freq : - (val * data->pwm1_freq * 2 + 127) / 255; - i2c_smbus_write_byte_data(client, LM63_REG_PWM_VALUE, data->pwm1_value); - up(&data->update_lock); - return count; -} - -static ssize_t show_pwm1_enable(struct device *dev, struct device_attribute *dummy, - char *buf) -{ - struct lm63_data *data = lm63_update_device(dev); - return sprintf(buf, "%d\n", data->config_fan & 0x20 ? 1 : 2); -} - -static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct lm63_data *data = lm63_update_device(dev); - return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->temp8[attr->index])); -} - -static ssize_t set_temp8(struct device *dev, struct device_attribute *dummy, - const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm63_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->temp8[1] = TEMP8_TO_REG(val); - i2c_smbus_write_byte_data(client, LM63_REG_LOCAL_HIGH, data->temp8[1]); - up(&data->update_lock); - return count; -} - -static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct lm63_data *data = lm63_update_device(dev); - return sprintf(buf, "%d\n", TEMP11_FROM_REG(data->temp11[attr->index])); -} - -static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr, - const char *buf, size_t count) -{ - static const u8 reg[4] = { - LM63_REG_REMOTE_LOW_MSB, - LM63_REG_REMOTE_LOW_LSB, - LM63_REG_REMOTE_HIGH_MSB, - LM63_REG_REMOTE_HIGH_LSB, - }; - - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct i2c_client *client = to_i2c_client(dev); - struct lm63_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - int nr = attr->index; - - down(&data->update_lock); - data->temp11[nr] = TEMP11_TO_REG(val); - i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2], - data->temp11[nr] >> 8); - i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2 + 1], - data->temp11[nr] & 0xff); - up(&data->update_lock); - return count; -} - -/* Hysteresis register holds a relative value, while we want to present - an absolute to user-space */ -static ssize_t show_temp2_crit_hyst(struct device *dev, struct device_attribute *dummy, - char *buf) -{ - struct lm63_data *data = lm63_update_device(dev); - return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->temp8[2]) - - TEMP8_FROM_REG(data->temp2_crit_hyst)); -} - -/* And now the other way around, user-space provides an absolute - hysteresis value and we have to store a relative one */ -static ssize_t set_temp2_crit_hyst(struct device *dev, struct device_attribute *dummy, - const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm63_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - long hyst; - - down(&data->update_lock); - hyst = TEMP8_FROM_REG(data->temp8[2]) - val; - i2c_smbus_write_byte_data(client, LM63_REG_REMOTE_TCRIT_HYST, - HYST_TO_REG(hyst)); - up(&data->update_lock); - return count; -} - -static ssize_t show_alarms(struct device *dev, struct device_attribute *dummy, - char *buf) -{ - struct lm63_data *data = lm63_update_device(dev); - return sprintf(buf, "%u\n", data->alarms); -} - -static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); -static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan, - set_fan, 1); - -static DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1); -static DEVICE_ATTR(pwm1_enable, S_IRUGO, show_pwm1_enable, NULL); - -static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp8, NULL, 0); -static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp8, - set_temp8, 1); - -static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp11, NULL, 0); -static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp11, - set_temp11, 1); -static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp11, - set_temp11, 2); -static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp8, NULL, 2); -static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_temp2_crit_hyst, - set_temp2_crit_hyst); - -static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); - -/* - * Real code - */ - -static int lm63_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, lm63_detect); -} - -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ -static int lm63_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *new_client; - struct lm63_data *data; - int err = 0; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kmalloc(sizeof(struct lm63_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - memset(data, 0, sizeof(struct lm63_data)); - - /* The common I2C client data is placed right before the - LM63-specific data. */ - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &lm63_driver; - new_client->flags = 0; - - /* Default to an LM63 if forced */ - if (kind == 0) - kind = lm63; - - if (kind < 0) { /* must identify */ - u8 man_id, chip_id, reg_config1, reg_config2; - u8 reg_alert_status, reg_alert_mask; - - man_id = i2c_smbus_read_byte_data(new_client, - LM63_REG_MAN_ID); - chip_id = i2c_smbus_read_byte_data(new_client, - LM63_REG_CHIP_ID); - reg_config1 = i2c_smbus_read_byte_data(new_client, - LM63_REG_CONFIG1); - reg_config2 = i2c_smbus_read_byte_data(new_client, - LM63_REG_CONFIG2); - reg_alert_status = i2c_smbus_read_byte_data(new_client, - LM63_REG_ALERT_STATUS); - reg_alert_mask = i2c_smbus_read_byte_data(new_client, - LM63_REG_ALERT_MASK); - - if (man_id == 0x01 /* National Semiconductor */ - && chip_id == 0x41 /* LM63 */ - && (reg_config1 & 0x18) == 0x00 - && (reg_config2 & 0xF8) == 0x00 - && (reg_alert_status & 0x20) == 0x00 - && (reg_alert_mask & 0xA4) == 0xA4) { - kind = lm63; - } else { /* failed */ - dev_dbg(&adapter->dev, "Unsupported chip " - "(man_id=0x%02X, chip_id=0x%02X).\n", - man_id, chip_id); - goto exit_free; - } - } - - strlcpy(new_client->name, "lm63", I2C_NAME_SIZE); - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - - /* Initialize the LM63 chip */ - lm63_init_client(new_client); - - /* Register sysfs hooks */ - if (data->config & 0x04) { /* tachometer enabled */ - device_create_file(&new_client->dev, - &sensor_dev_attr_fan1_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_fan1_min.dev_attr); - } - device_create_file(&new_client->dev, &dev_attr_pwm1); - device_create_file(&new_client->dev, &dev_attr_pwm1_enable); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_min.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_max.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_max.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_crit.dev_attr); - device_create_file(&new_client->dev, &dev_attr_temp2_crit_hyst); - device_create_file(&new_client->dev, &dev_attr_alarms); - - return 0; - -exit_free: - kfree(data); -exit: - return err; -} - -/* Idealy we shouldn't have to initialize anything, since the BIOS - should have taken care of everything */ -static void lm63_init_client(struct i2c_client *client) -{ - struct lm63_data *data = i2c_get_clientdata(client); - - data->config = i2c_smbus_read_byte_data(client, LM63_REG_CONFIG1); - data->config_fan = i2c_smbus_read_byte_data(client, - LM63_REG_CONFIG_FAN); - - /* Start converting if needed */ - if (data->config & 0x40) { /* standby */ - dev_dbg(&client->dev, "Switching to operational mode"); - data->config &= 0xA7; - i2c_smbus_write_byte_data(client, LM63_REG_CONFIG1, - data->config); - } - - /* We may need pwm1_freq before ever updating the client data */ - data->pwm1_freq = i2c_smbus_read_byte_data(client, LM63_REG_PWM_FREQ); - if (data->pwm1_freq == 0) - data->pwm1_freq = 1; - - /* Show some debug info about the LM63 configuration */ - dev_dbg(&client->dev, "Alert/tach pin configured for %s\n", - (data->config & 0x04) ? "tachometer input" : - "alert output"); - dev_dbg(&client->dev, "PWM clock %s kHz, output frequency %u Hz\n", - (data->config_fan & 0x08) ? "1.4" : "360", - ((data->config_fan & 0x08) ? 700 : 180000) / data->pwm1_freq); - dev_dbg(&client->dev, "PWM output active %s, %s mode\n", - (data->config_fan & 0x10) ? "low" : "high", - (data->config_fan & 0x20) ? "manual" : "auto"); -} - -static int lm63_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached\n"); - return err; - } - - kfree(i2c_get_clientdata(client)); - return 0; -} - -static struct lm63_data *lm63_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm63_data *data = i2c_get_clientdata(client); - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { - if (data->config & 0x04) { /* tachometer enabled */ - /* order matters for fan1_input */ - data->fan[0] = i2c_smbus_read_byte_data(client, - LM63_REG_TACH_COUNT_LSB) & 0xFC; - data->fan[0] |= i2c_smbus_read_byte_data(client, - LM63_REG_TACH_COUNT_MSB) << 8; - data->fan[1] = (i2c_smbus_read_byte_data(client, - LM63_REG_TACH_LIMIT_LSB) & 0xFC) - | (i2c_smbus_read_byte_data(client, - LM63_REG_TACH_LIMIT_MSB) << 8); - } - - data->pwm1_freq = i2c_smbus_read_byte_data(client, - LM63_REG_PWM_FREQ); - if (data->pwm1_freq == 0) - data->pwm1_freq = 1; - data->pwm1_value = i2c_smbus_read_byte_data(client, - LM63_REG_PWM_VALUE); - - data->temp8[0] = i2c_smbus_read_byte_data(client, - LM63_REG_LOCAL_TEMP); - data->temp8[1] = i2c_smbus_read_byte_data(client, - LM63_REG_LOCAL_HIGH); - - /* order matters for temp2_input */ - data->temp11[0] = i2c_smbus_read_byte_data(client, - LM63_REG_REMOTE_TEMP_MSB) << 8; - data->temp11[0] |= i2c_smbus_read_byte_data(client, - LM63_REG_REMOTE_TEMP_LSB); - data->temp11[1] = (i2c_smbus_read_byte_data(client, - LM63_REG_REMOTE_LOW_MSB) << 8) - | i2c_smbus_read_byte_data(client, - LM63_REG_REMOTE_LOW_LSB); - data->temp11[2] = (i2c_smbus_read_byte_data(client, - LM63_REG_REMOTE_HIGH_MSB) << 8) - | i2c_smbus_read_byte_data(client, - LM63_REG_REMOTE_HIGH_LSB); - data->temp8[2] = i2c_smbus_read_byte_data(client, - LM63_REG_REMOTE_TCRIT); - data->temp2_crit_hyst = i2c_smbus_read_byte_data(client, - LM63_REG_REMOTE_TCRIT_HYST); - - data->alarms = i2c_smbus_read_byte_data(client, - LM63_REG_ALERT_STATUS) & 0x7F; - - data->last_updated = jiffies; - data->valid = 1; - } - - up(&data->update_lock); - - return data; -} - -static int __init sensors_lm63_init(void) -{ - return i2c_add_driver(&lm63_driver); -} - -static void __exit sensors_lm63_exit(void) -{ - i2c_del_driver(&lm63_driver); -} - -MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); -MODULE_DESCRIPTION("LM63 driver"); -MODULE_LICENSE("GPL"); - -module_init(sensors_lm63_init); -module_exit(sensors_lm63_exit); |