diff options
Diffstat (limited to 'drivers/i2c/chips/lm85.c')
| -rw-r--r-- | drivers/i2c/chips/lm85.c | 1575 |
1 files changed, 0 insertions, 1575 deletions
diff --git a/drivers/i2c/chips/lm85.c b/drivers/i2c/chips/lm85.c deleted file mode 100644 index b4d7fd41826..00000000000 --- a/drivers/i2c/chips/lm85.c +++ /dev/null @@ -1,1575 +0,0 @@ -/* - lm85.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring - Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> - Copyright (c) 2002, 2003 Philip Pokorny <ppokorny@penguincomputing.com> - Copyright (c) 2003 Margit Schubert-While <margitsw@t-online.de> - Copyright (c) 2004 Justin Thiessen <jthiessen@penguincomputing.com> - - Chip details at <http://www.national.com/ds/LM/LM85.pdf> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> -#include <linux/i2c-vid.h> - -/* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; - -/* Insmod parameters */ -SENSORS_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); - -/* The LM85 registers */ - -#define LM85_REG_IN(nr) (0x20 + (nr)) -#define LM85_REG_IN_MIN(nr) (0x44 + (nr) * 2) -#define LM85_REG_IN_MAX(nr) (0x45 + (nr) * 2) - -#define LM85_REG_TEMP(nr) (0x25 + (nr)) -#define LM85_REG_TEMP_MIN(nr) (0x4e + (nr) * 2) -#define LM85_REG_TEMP_MAX(nr) (0x4f + (nr) * 2) - -/* Fan speeds are LSB, MSB (2 bytes) */ -#define LM85_REG_FAN(nr) (0x28 + (nr) *2) -#define LM85_REG_FAN_MIN(nr) (0x54 + (nr) *2) - -#define LM85_REG_PWM(nr) (0x30 + (nr)) - -#define ADT7463_REG_OPPOINT(nr) (0x33 + (nr)) - -#define ADT7463_REG_TMIN_CTL1 0x36 -#define ADT7463_REG_TMIN_CTL2 0x37 - -#define LM85_REG_DEVICE 0x3d -#define LM85_REG_COMPANY 0x3e -#define LM85_REG_VERSTEP 0x3f -/* These are the recognized values for the above regs */ -#define LM85_DEVICE_ADX 0x27 -#define LM85_COMPANY_NATIONAL 0x01 -#define LM85_COMPANY_ANALOG_DEV 0x41 -#define LM85_COMPANY_SMSC 0x5c -#define LM85_VERSTEP_VMASK 0xf0 -#define LM85_VERSTEP_GENERIC 0x60 -#define LM85_VERSTEP_LM85C 0x60 -#define LM85_VERSTEP_LM85B 0x62 -#define LM85_VERSTEP_ADM1027 0x60 -#define LM85_VERSTEP_ADT7463 0x62 -#define LM85_VERSTEP_ADT7463C 0x6A -#define LM85_VERSTEP_EMC6D100_A0 0x60 -#define LM85_VERSTEP_EMC6D100_A1 0x61 -#define LM85_VERSTEP_EMC6D102 0x65 - -#define LM85_REG_CONFIG 0x40 - -#define LM85_REG_ALARM1 0x41 -#define LM85_REG_ALARM2 0x42 - -#define LM85_REG_VID 0x43 - -/* Automated FAN control */ -#define LM85_REG_AFAN_CONFIG(nr) (0x5c + (nr)) -#define LM85_REG_AFAN_RANGE(nr) (0x5f + (nr)) -#define LM85_REG_AFAN_SPIKE1 0x62 -#define LM85_REG_AFAN_SPIKE2 0x63 -#define LM85_REG_AFAN_MINPWM(nr) (0x64 + (nr)) -#define LM85_REG_AFAN_LIMIT(nr) (0x67 + (nr)) -#define LM85_REG_AFAN_CRITICAL(nr) (0x6a + (nr)) -#define LM85_REG_AFAN_HYST1 0x6d -#define LM85_REG_AFAN_HYST2 0x6e - -#define LM85_REG_TACH_MODE 0x74 -#define LM85_REG_SPINUP_CTL 0x75 - -#define ADM1027_REG_TEMP_OFFSET(nr) (0x70 + (nr)) -#define ADM1027_REG_CONFIG2 0x73 -#define ADM1027_REG_INTMASK1 0x74 -#define ADM1027_REG_INTMASK2 0x75 -#define ADM1027_REG_EXTEND_ADC1 0x76 -#define ADM1027_REG_EXTEND_ADC2 0x77 -#define ADM1027_REG_CONFIG3 0x78 -#define ADM1027_REG_FAN_PPR 0x7b - -#define ADT7463_REG_THERM 0x79 -#define ADT7463_REG_THERM_LIMIT 0x7A - -#define EMC6D100_REG_ALARM3 0x7d -/* IN5, IN6 and IN7 */ -#define EMC6D100_REG_IN(nr) (0x70 + ((nr)-5)) -#define EMC6D100_REG_IN_MIN(nr) (0x73 + ((nr)-5) * 2) -#define EMC6D100_REG_IN_MAX(nr) (0x74 + ((nr)-5) * 2) -#define EMC6D102_REG_EXTEND_ADC1 0x85 -#define EMC6D102_REG_EXTEND_ADC2 0x86 -#define EMC6D102_REG_EXTEND_ADC3 0x87 -#define EMC6D102_REG_EXTEND_ADC4 0x88 - -#define LM85_ALARM_IN0 0x0001 -#define LM85_ALARM_IN1 0x0002 -#define LM85_ALARM_IN2 0x0004 -#define LM85_ALARM_IN3 0x0008 -#define LM85_ALARM_TEMP1 0x0010 -#define LM85_ALARM_TEMP2 0x0020 -#define LM85_ALARM_TEMP3 0x0040 -#define LM85_ALARM_ALARM2 0x0080 -#define LM85_ALARM_IN4 0x0100 -#define LM85_ALARM_RESERVED 0x0200 -#define LM85_ALARM_FAN1 0x0400 -#define LM85_ALARM_FAN2 0x0800 -#define LM85_ALARM_FAN3 0x1000 -#define LM85_ALARM_FAN4 0x2000 -#define LM85_ALARM_TEMP1_FAULT 0x4000 -#define LM85_ALARM_TEMP3_FAULT 0x8000 - - -/* Conversions. Rounding and limit checking is only done on the TO_REG - variants. Note that you should be a bit careful with which arguments - these macros are called: arguments may be evaluated more than once. - */ - -/* IN are scaled acording to built-in resistors */ -static int lm85_scaling[] = { /* .001 Volts */ - 2500, 2250, 3300, 5000, 12000, - 3300, 1500, 1800 /*EMC6D100*/ - }; -#define SCALE(val,from,to) (((val)*(to) + ((from)/2))/(from)) - -#define INS_TO_REG(n,val) \ - SENSORS_LIMIT(SCALE(val,lm85_scaling[n],192),0,255) - -#define INSEXT_FROM_REG(n,val,ext,scale) \ - SCALE((val)*(scale) + (ext),192*(scale),lm85_scaling[n]) - -#define INS_FROM_REG(n,val) INSEXT_FROM_REG(n,val,0,1) - -/* FAN speed is measured using 90kHz clock */ -#define FAN_TO_REG(val) (SENSORS_LIMIT( (val)<=0?0: 5400000/(val),0,65534)) -#define FAN_FROM_REG(val) ((val)==0?-1:(val)==0xffff?0:5400000/(val)) - -/* Temperature is reported in .001 degC increments */ -#define TEMP_TO_REG(val) \ - SENSORS_LIMIT(SCALE(val,1000,1),-127,127) -#define TEMPEXT_FROM_REG(val,ext,scale) \ - SCALE((val)*scale + (ext),scale,1000) -#define TEMP_FROM_REG(val) \ - TEMPEXT_FROM_REG(val,0,1) - -#define PWM_TO_REG(val) (SENSORS_LIMIT(val,0,255)) -#define PWM_FROM_REG(val) (val) - - -/* ZONEs have the following parameters: - * Limit (low) temp, 1. degC - * Hysteresis (below limit), 1. degC (0-15) - * Range of speed control, .1 degC (2-80) - * Critical (high) temp, 1. degC - * - * FAN PWMs have the following parameters: - * Reference Zone, 1, 2, 3, etc. - * Spinup time, .05 sec - * PWM value at limit/low temp, 1 count - * PWM Frequency, 1. Hz - * PWM is Min or OFF below limit, flag - * Invert PWM output, flag - * - * Some chips filter the temp, others the fan. - * Filter constant (or disabled) .1 seconds - */ - -/* These are the zone temperature range encodings in .001 degree C */ -static int lm85_range_map[] = { - 2000, 2500, 3300, 4000, 5000, 6600, - 8000, 10000, 13300, 16000, 20000, 26600, - 32000, 40000, 53300, 80000 - }; -static int RANGE_TO_REG( int range ) -{ - int i; - - if ( range < lm85_range_map[0] ) { - return 0 ; - } else if ( range > lm85_range_map[15] ) { - return 15 ; - } else { /* find closest match */ - for ( i = 14 ; i >= 0 ; --i ) { - if ( range > lm85_range_map[i] ) { /* range bracketed */ - if ((lm85_range_map[i+1] - range) < - (range - lm85_range_map[i])) { - i++; - break; - } - break; - } - } - } - return( i & 0x0f ); -} -#define RANGE_FROM_REG(val) (lm85_range_map[(val)&0x0f]) - -/* These are the Acoustic Enhancement, or Temperature smoothing encodings - * NOTE: The enable/disable bit is INCLUDED in these encodings as the - * MSB (bit 3, value 8). If the enable bit is 0, the encoded value - * is ignored, or set to 0. - */ -/* These are the PWM frequency encodings */ -static int lm85_freq_map[] = { /* .1 Hz */ - 100, 150, 230, 300, 380, 470, 620, 940 - }; -static int FREQ_TO_REG( int freq ) -{ - int i; - - if( freq >= lm85_freq_map[7] ) { return 7 ; } - for( i = 0 ; i < 7 ; ++i ) - if( freq <= lm85_freq_map[i] ) - break ; - return( i & 0x07 ); -} -#define FREQ_FROM_REG(val) (lm85_freq_map[(val)&0x07]) - -/* Since we can't use strings, I'm abusing these numbers - * to stand in for the following meanings: - * 1 -- PWM responds to Zone 1 - * 2 -- PWM responds to Zone 2 - * 3 -- PWM responds to Zone 3 - * 23 -- PWM responds to the higher temp of Zone 2 or 3 - * 123 -- PWM responds to highest of Zone 1, 2, or 3 - * 0 -- PWM is always at 0% (ie, off) - * -1 -- PWM is always at 100% - * -2 -- PWM responds to manual control - */ - -static int lm85_zone_map[] = { 1, 2, 3, -1, 0, 23, 123, -2 }; -#define ZONE_FROM_REG(val) (lm85_zone_map[((val)>>5)&0x07]) - -static int ZONE_TO_REG( int zone ) -{ - int i; - - for( i = 0 ; i <= 7 ; ++i ) - if( zone == lm85_zone_map[i] ) - break ; - if( i > 7 ) /* Not found. */ - i = 3; /* Always 100% */ - return( (i & 0x07)<<5 ); -} - -#define HYST_TO_REG(val) (SENSORS_LIMIT(((val)+500)/1000,0,15)) -#define HYST_FROM_REG(val) ((val)*1000) - -#define OFFSET_TO_REG(val) (SENSORS_LIMIT((val)/25,-127,127)) -#define OFFSET_FROM_REG(val) ((val)*25) - -#define PPR_MASK(fan) (0x03<<(fan *2)) -#define PPR_TO_REG(val,fan) (SENSORS_LIMIT((val)-1,0,3)<<(fan *2)) -#define PPR_FROM_REG(val,fan) ((((val)>>(fan * 2))&0x03)+1) - -/* i2c-vid.h defines vid_from_reg() */ -#define VID_FROM_REG(val,vrm) (vid_from_reg((val),(vrm))) - -/* Unlike some other drivers we DO NOT set initial limits. Use - * the config file to set limits. Some users have reported - * motherboards shutting down when we set limits in a previous - * version of the driver. - */ - -/* Chip sampling rates - * - * Some sensors are not updated more frequently than once per second - * so it doesn't make sense to read them more often than that. - * We cache the results and return the saved data if the driver - * is called again before a second has elapsed. - * - * Also, there is significant configuration data for this chip - * given the automatic PWM fan control that is possible. There - * are about 47 bytes of config data to only 22 bytes of actual - * readings. So, we keep the config data up to date in the cache - * when it is written and only sample it once every 1 *minute* - */ -#define LM85_DATA_INTERVAL (HZ + HZ / 2) -#define LM85_CONFIG_INTERVAL (1 * 60 * HZ) - -/* For each registered LM85, we need to keep some data in memory. That - data is pointed to by lm85_list[NR]->data. The structure itself is - dynamically allocated, at the same time when a new lm85 client is - allocated. */ - -/* LM85 can automatically adjust fan speeds based on temperature - * This structure encapsulates an entire Zone config. There are - * three zones (one for each temperature input) on the lm85 - */ -struct lm85_zone { - s8 limit; /* Low temp limit */ - u8 hyst; /* Low limit hysteresis. (0-15) */ - u8 range; /* Temp range, encoded */ - s8 critical; /* "All fans ON" temp limit */ - u8 off_desired; /* Actual "off" temperature specified. Preserved - * to prevent "drift" as other autofan control - * values change. - */ - u8 max_desired; /* Actual "max" temperature specified. Preserved - * to prevent "drift" as other autofan control - * values change. - */ -}; - -struct lm85_autofan { - u8 config; /* Register value */ - u8 freq; /* PWM frequency, encoded */ - u8 min_pwm; /* Minimum PWM value, encoded */ - u8 min_off; /* Min PWM or OFF below "limit", flag */ -}; - -struct lm85_data { - struct i2c_client client; - struct semaphore lock; - enum chips type; - - struct semaphore update_lock; - int valid; /* !=0 if following fields are valid */ - unsigned long last_reading; /* In jiffies */ - unsigned long last_config; /* In jiffies */ - - u8 in[8]; /* Register value */ - u8 in_max[8]; /* Register value */ - u8 in_min[8]; /* Register value */ - s8 temp[3]; /* Register value */ - s8 temp_min[3]; /* Register value */ - s8 temp_max[3]; /* Register value */ - s8 temp_offset[3]; /* Register value */ - u16 fan[4]; /* Register value */ - u16 fan_min[4]; /* Register value */ - u8 pwm[3]; /* Register value */ - u8 spinup_ctl; /* Register encoding, combined */ - u8 tach_mode; /* Register encoding, combined */ - u8 temp_ext[3]; /* Decoded values */ - u8 in_ext[8]; /* Decoded values */ - u8 adc_scale; /* ADC Extended bits scaling factor */ - u8 fan_ppr; /* Register value */ - u8 smooth[3]; /* Register encoding */ - u8 vid; /* Register value */ - u8 vrm; /* VRM version */ - u8 syncpwm3; /* Saved PWM3 for TACH 2,3,4 config */ - u8 oppoint[3]; /* Register value */ - u16 tmin_ctl; /* Register value */ - unsigned long therm_total; /* Cummulative therm count */ - u8 therm_limit; /* Register value */ - u32 alarms; /* Register encoding, combined */ - struct lm85_autofan autofan[3]; - struct lm85_zone zone[3]; -}; - -static int lm85_attach_adapter(struct i2c_adapter *adapter); -static int lm85_detect(struct i2c_adapter *adapter, int address, - int kind); -static int lm85_detach_client(struct i2c_client *client); - -static int lm85_read_value(struct i2c_client *client, u8 register); -static int lm85_write_value(struct i2c_client *client, u8 register, int value); -static struct lm85_data *lm85_update_device(struct device *dev); -static void lm85_init_client(struct i2c_client *client); - - -static struct i2c_driver lm85_driver = { - .owner = THIS_MODULE, - .name = "lm85", - .id = I2C_DRIVERID_LM85, - .flags = I2C_DF_NOTIFY, - .attach_adapter = lm85_attach_adapter, - .detach_client = lm85_detach_client, -}; - - -/* 4 Fans */ -static ssize_t show_fan(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr]) ); -} -static ssize_t show_fan_min(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr]) ); -} -static ssize_t set_fan_min(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->fan_min[nr] = FAN_TO_REG(val); - lm85_write_value(client, LM85_REG_FAN_MIN(nr), data->fan_min[nr]); - up(&data->update_lock); - return count; -} - -#define show_fan_offset(offset) \ -static ssize_t show_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan(dev, buf, offset - 1); \ -} \ -static ssize_t show_fan_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan_min(dev, buf, offset - 1); \ -} \ -static ssize_t set_fan_##offset##_min (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_fan_min(dev, buf, count, offset - 1); \ -} \ -static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, \ - NULL); \ -static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_fan_##offset##_min, set_fan_##offset##_min); - -show_fan_offset(1); -show_fan_offset(2); -show_fan_offset(3); -show_fan_offset(4); - -/* vid, vrm, alarms */ - -static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm)); -} - -static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL); - -static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf, "%ld\n", (long) data->vrm); -} - -static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - u32 val; - - val = simple_strtoul(buf, NULL, 10); - data->vrm = val; - return count; -} - -static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg); - -static ssize_t show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf, "%u\n", data->alarms); -} - -static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL); - -/* pwm */ - -static ssize_t show_pwm(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", PWM_FROM_REG(data->pwm[nr]) ); -} -static ssize_t set_pwm(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->pwm[nr] = PWM_TO_REG(val); - lm85_write_value(client, LM85_REG_PWM(nr), data->pwm[nr]); - up(&data->update_lock); - return count; -} -static ssize_t show_pwm_enable(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - int pwm_zone; - - pwm_zone = ZONE_FROM_REG(data->autofan[nr].config); - return sprintf(buf,"%d\n", (pwm_zone != 0 && pwm_zone != -1) ); -} - -#define show_pwm_reg(offset) \ -static ssize_t show_pwm_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_pwm(dev, buf, offset - 1); \ -} \ -static ssize_t set_pwm_##offset (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_pwm(dev, buf, count, offset - 1); \ -} \ -static ssize_t show_pwm_enable##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_pwm_enable(dev, buf, offset - 1); \ -} \ -static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \ - show_pwm_##offset, set_pwm_##offset); \ -static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO, \ - show_pwm_enable##offset, NULL); - -show_pwm_reg(1); -show_pwm_reg(2); -show_pwm_reg(3); - -/* Voltages */ - -static ssize_t show_in(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf( buf, "%d\n", INSEXT_FROM_REG(nr, - data->in[nr], - data->in_ext[nr], - data->adc_scale) ); -} -static ssize_t show_in_min(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_min[nr]) ); -} -static ssize_t set_in_min(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->in_min[nr] = INS_TO_REG(nr, val); - lm85_write_value(client, LM85_REG_IN_MIN(nr), data->in_min[nr]); - up(&data->update_lock); - return count; -} -static ssize_t show_in_max(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_max[nr]) ); -} -static ssize_t set_in_max(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->in_max[nr] = INS_TO_REG(nr, val); - lm85_write_value(client, LM85_REG_IN_MAX(nr), data->in_max[nr]); - up(&data->update_lock); - return count; -} -#define show_in_reg(offset) \ -static ssize_t show_in_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_in(dev, buf, offset); \ -} \ -static ssize_t show_in_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_in_min(dev, buf, offset); \ -} \ -static ssize_t show_in_##offset##_max (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_in_max(dev, buf, offset); \ -} \ -static ssize_t set_in_##offset##_min (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_in_min(dev, buf, count, offset); \ -} \ -static ssize_t set_in_##offset##_max (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_in_max(dev, buf, count, offset); \ -} \ -static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in_##offset, \ - NULL); \ -static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ - show_in_##offset##_min, set_in_##offset##_min); \ -static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ - show_in_##offset##_max, set_in_##offset##_max); - -show_in_reg(0); -show_in_reg(1); -show_in_reg(2); -show_in_reg(3); -show_in_reg(4); - -/* Temps */ - -static ssize_t show_temp(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMPEXT_FROM_REG(data->temp[nr], - data->temp_ext[nr], - data->adc_scale) ); -} -static ssize_t show_temp_min(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_min[nr]) ); -} -static ssize_t set_temp_min(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->temp_min[nr] = TEMP_TO_REG(val); - lm85_write_value(client, LM85_REG_TEMP_MIN(nr), data->temp_min[nr]); - up(&data->update_lock); - return count; -} -static ssize_t show_temp_max(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_max[nr]) ); -} -static ssize_t set_temp_max(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->temp_max[nr] = TEMP_TO_REG(val); - lm85_write_value(client, LM85_REG_TEMP_MAX(nr), data->temp_max[nr]); - up(&data->update_lock); - return count; -} -#define show_temp_reg(offset) \ -static ssize_t show_temp_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_temp(dev, buf, offset - 1); \ -} \ -static ssize_t show_temp_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_temp_min(dev, buf, offset - 1); \ -} \ -static ssize_t show_temp_##offset##_max (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_temp_max(dev, buf, offset - 1); \ -} \ -static ssize_t set_temp_##offset##_min (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_temp_min(dev, buf, count, offset - 1); \ -} \ -static ssize_t set_temp_##offset##_max (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_temp_max(dev, buf, count, offset - 1); \ -} \ -static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset, \ - NULL); \ -static DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \ - show_temp_##offset##_min, set_temp_##offset##_min); \ -static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ - show_temp_##offset##_max, set_temp_##offset##_max); - -show_temp_reg(1); -show_temp_reg(2); -show_temp_reg(3); - - -/* Automatic PWM control */ - -static ssize_t show_pwm_auto_channels(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", ZONE_FROM_REG(data->autofan[nr].config)); -} -static ssize_t set_pwm_auto_channels(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->autofan[nr].config = (data->autofan[nr].config & (~0xe0)) - | ZONE_TO_REG(val) ; - lm85_write_value(client, LM85_REG_AFAN_CONFIG(nr), - data->autofan[nr].config); - up(&data->update_lock); - return count; -} -static ssize_t show_pwm_auto_pwm_min(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", PWM_FROM_REG(data->autofan[nr].min_pwm)); -} -static ssize_t set_pwm_auto_pwm_min(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->autofan[nr].min_pwm = PWM_TO_REG(val); - lm85_write_value(client, LM85_REG_AFAN_MINPWM(nr), - data->autofan[nr].min_pwm); - up(&data->update_lock); - return count; -} -static ssize_t show_pwm_auto_pwm_minctl(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", data->autofan[nr].min_off); -} -static ssize_t set_pwm_auto_pwm_minctl(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->autofan[nr].min_off = val; - lm85_write_value(client, LM85_REG_AFAN_SPIKE1, data->smooth[0] - | data->syncpwm3 - | (data->autofan[0].min_off ? 0x20 : 0) - | (data->autofan[1].min_off ? 0x40 : 0) - | (data->autofan[2].min_off ? 0x80 : 0) - ); - up(&data->update_lock); - return count; -} -static ssize_t show_pwm_auto_pwm_freq(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", FREQ_FROM_REG(data->autofan[nr].freq)); -} -static ssize_t set_pwm_auto_pwm_freq(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->autofan[nr].freq = FREQ_TO_REG(val); - lm85_write_value(client, LM85_REG_AFAN_RANGE(nr), - (data->zone[nr].range << 4) - | data->autofan[nr].freq - ); - up(&data->update_lock); - return count; -} -#define pwm_auto(offset) \ -static ssize_t show_pwm##offset##_auto_channels (struct device *dev, struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_pwm_auto_channels(dev, buf, offset - 1); \ -} \ -static ssize_t set_pwm##offset##_auto_channels (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_pwm_auto_channels(dev, buf, count, offset - 1); \ -} \ -static ssize_t show_pwm##offset##_auto_pwm_min (struct device *dev, struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_pwm_auto_pwm_min(dev, buf, offset - 1); \ -} \ -static ssize_t set_pwm##offset##_auto_pwm_min (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_pwm_auto_pwm_min(dev, buf, count, offset - 1); \ -} \ -static ssize_t show_pwm##offset##_auto_pwm_minctl (struct device *dev, struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_pwm_auto_pwm_minctl(dev, buf, offset - 1); \ -} \ -static ssize_t set_pwm##offset##_auto_pwm_minctl (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_pwm_auto_pwm_minctl(dev, buf, count, offset - 1); \ -} \ -static ssize_t show_pwm##offset##_auto_pwm_freq (struct device *dev, struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_pwm_auto_pwm_freq(dev, buf, offset - 1); \ -} \ -static ssize_t set_pwm##offset##_auto_pwm_freq(struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_pwm_auto_pwm_freq(dev, buf, count, offset - 1); \ -} \ -static DEVICE_ATTR(pwm##offset##_auto_channels, S_IRUGO | S_IWUSR, \ - show_pwm##offset##_auto_channels, \ - set_pwm##offset##_auto_channels); \ -static DEVICE_ATTR(pwm##offset##_auto_pwm_min, S_IRUGO | S_IWUSR, \ - show_pwm##offset##_auto_pwm_min, \ - set_pwm##offset##_auto_pwm_min); \ -static DEVICE_ATTR(pwm##offset##_auto_pwm_minctl, S_IRUGO | S_IWUSR, \ - show_pwm##offset##_auto_pwm_minctl, \ - set_pwm##offset##_auto_pwm_minctl); \ -static DEVICE_ATTR(pwm##offset##_auto_pwm_freq, S_IRUGO | S_IWUSR, \ - show_pwm##offset##_auto_pwm_freq, \ - set_pwm##offset##_auto_pwm_freq); -pwm_auto(1); -pwm_auto(2); -pwm_auto(3); - -/* Temperature settings for automatic PWM control */ - -static ssize_t show_temp_auto_temp_off(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) - - HYST_FROM_REG(data->zone[nr].hyst)); -} -static ssize_t set_temp_auto_temp_off(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - int min; - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - min = TEMP_FROM_REG(data->zone[nr].limit); - data->zone[nr].off_desired = TEMP_TO_REG(val); - data->zone[nr].hyst = HYST_TO_REG(min - val); - if ( nr == 0 || nr == 1 ) { - lm85_write_value(client, LM85_REG_AFAN_HYST1, - (data->zone[0].hyst << 4) - | data->zone[1].hyst - ); - } else { - lm85_write_value(client, LM85_REG_AFAN_HYST2, - (data->zone[2].hyst << 4) - ); - } - up(&data->update_lock); - return count; -} -static ssize_t show_temp_auto_temp_min(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) ); -} -static ssize_t set_temp_auto_temp_min(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->zone[nr].limit = TEMP_TO_REG(val); - lm85_write_value(client, LM85_REG_AFAN_LIMIT(nr), - data->zone[nr].limit); - -/* Update temp_auto_max and temp_auto_range */ - data->zone[nr].range = RANGE_TO_REG( - TEMP_FROM_REG(data->zone[nr].max_desired) - - TEMP_FROM_REG(data->zone[nr].limit)); - lm85_write_value(client, LM85_REG_AFAN_RANGE(nr), - ((data->zone[nr].range & 0x0f) << 4) - | (data->autofan[nr].freq & 0x07)); - -/* Update temp_auto_hyst and temp_auto_off */ - data->zone[nr].hyst = HYST_TO_REG(TEMP_FROM_REG( - data->zone[nr].limit) - TEMP_FROM_REG( - data->zone[nr].off_desired)); - if ( nr == 0 || nr == 1 ) { - lm85_write_value(client, LM85_REG_AFAN_HYST1, - (data->zone[0].hyst << 4) - | data->zone[1].hyst - ); - } else { - lm85_write_value(client, LM85_REG_AFAN_HYST2, - (data->zone[2].hyst << 4) - ); - } - up(&data->update_lock); - return count; -} -static ssize_t show_temp_auto_temp_max(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) + - RANGE_FROM_REG(data->zone[nr].range)); -} -static ssize_t set_temp_auto_temp_max(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - int min; - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - min = TEMP_FROM_REG(data->zone[nr].limit); - data->zone[nr].max_desired = TEMP_TO_REG(val); - data->zone[nr].range = RANGE_TO_REG( - val - min); - lm85_write_value(client, LM85_REG_AFAN_RANGE(nr), - ((data->zone[nr].range & 0x0f) << 4) - | (data->autofan[nr].freq & 0x07)); - up(&data->update_lock); - return count; -} -static ssize_t show_temp_auto_temp_crit(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].critical)); -} -static ssize_t set_temp_auto_temp_crit(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->zone[nr].critical = TEMP_TO_REG(val); - lm85_write_value(client, LM85_REG_AFAN_CRITICAL(nr), - data->zone[nr].critical); - up(&data->update_lock); - return count; -} -#define temp_auto(offset) \ -static ssize_t show_temp##offset##_auto_temp_off (struct device *dev, struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_temp_auto_temp_off(dev, buf, offset - 1); \ -} \ -static ssize_t set_temp##offset##_auto_temp_off (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_temp_auto_temp_off(dev, buf, count, offset - 1); \ -} \ -static ssize_t show_temp##offset##_auto_temp_min (struct device *dev, struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_temp_auto_temp_min(dev, buf, offset - 1); \ -} \ -static ssize_t set_temp##offset##_auto_temp_min (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_temp_auto_temp_min(dev, buf, count, offset - 1); \ -} \ -static ssize_t show_temp##offset##_auto_temp_max (struct device *dev, struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_temp_auto_temp_max(dev, buf, offset - 1); \ -} \ -static ssize_t set_temp##offset##_auto_temp_max (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_temp_auto_temp_max(dev, buf, count, offset - 1); \ -} \ -static ssize_t show_temp##offset##_auto_temp_crit (struct device *dev, struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_temp_auto_temp_crit(dev, buf, offset - 1); \ -} \ -static ssize_t set_temp##offset##_auto_temp_crit (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_temp_auto_temp_crit(dev, buf, count, offset - 1); \ -} \ -static DEVICE_ATTR(temp##offset##_auto_temp_off, S_IRUGO | S_IWUSR, \ - show_temp##offset##_auto_temp_off, \ - set_temp##offset##_auto_temp_off); \ -static DEVICE_ATTR(temp##offset##_auto_temp_min, S_IRUGO | S_IWUSR, \ - show_temp##offset##_auto_temp_min, \ - set_temp##offset##_auto_temp_min); \ -static DEVICE_ATTR(temp##offset##_auto_temp_max, S_IRUGO | S_IWUSR, \ - show_temp##offset##_auto_temp_max, \ - set_temp##offset##_auto_temp_max); \ -static DEVICE_ATTR(temp##offset##_auto_temp_crit, S_IRUGO | S_IWUSR, \ - show_temp##offset##_auto_temp_crit, \ - set_temp##offset##_auto_temp_crit); -temp_auto(1); -temp_auto(2); -temp_auto(3); - -int lm85_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, lm85_detect); -} - -int lm85_detect(struct i2c_adapter *adapter, int address, - int kind) -{ - int company, verstep ; - struct i2c_client *new_client = NULL; - struct lm85_data *data; - int err = 0; - const char *type_name = ""; - - if (i2c_is_isa_adapter(adapter)) { - /* This chip has no ISA interface */ - goto ERROR0 ; - }; - - if (!i2c_check_functionality(adapter, - I2C_FUNC_SMBUS_BYTE_DATA)) { - /* We need to be able to do byte I/O */ - goto ERROR0 ; - }; - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access lm85_{read,write}_value. */ - - if (!(data = kmalloc(sizeof(struct lm85_data), GFP_KERNEL))) { - err = -ENOMEM; - goto ERROR0; - } - memset(data, 0, sizeof(struct lm85_data)); - - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &lm85_driver; - new_client->flags = 0; - - /* Now, we do the remaining detection. */ - - company = lm85_read_value(new_client, LM85_REG_COMPANY); - verstep = lm85_read_value(new_client, LM85_REG_VERSTEP); - - dev_dbg(&adapter->dev, "Detecting device at %d,0x%02x with" - " COMPANY: 0x%02x and VERSTEP: 0x%02x\n", - i2c_adapter_id(new_client->adapter), new_client->addr, - company, verstep); - - /* If auto-detecting, Determine the chip type. */ - if (kind <= 0) { - dev_dbg(&adapter->dev, "Autodetecting device at %d,0x%02x ...\n", - i2c_adapter_id(adapter), address ); - if( company == LM85_COMPANY_NATIONAL - && verstep == LM85_VERSTEP_LM85C ) { - kind = lm85c ; - } else if( company == LM85_COMPANY_NATIONAL - && verstep == LM85_VERSTEP_LM85B ) { - kind = lm85b ; - } else if( company == LM85_COMPANY_NATIONAL - && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC ) { - dev_err(&adapter->dev, "Unrecognized version/stepping 0x%02x" - " Defaulting to LM85.\n", verstep); - kind = any_chip ; - } else if( company == LM85_COMPANY_ANALOG_DEV - && verstep == LM85_VERSTEP_ADM1027 ) { - kind = adm1027 ; - } else if( company == LM85_COMPANY_ANALOG_DEV - && (verstep == LM85_VERSTEP_ADT7463 - || verstep == LM85_VERSTEP_ADT7463C) ) { - kind = adt7463 ; - } else if( company == LM85_COMPANY_ANALOG_DEV - && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC ) { - dev_err(&adapter->dev, "Unrecognized version/stepping 0x%02x" - " Defaulting to Generic LM85.\n", verstep ); - kind = any_chip ; - } else if( company == LM85_COMPANY_SMSC - && (verstep == LM85_VERSTEP_EMC6D100_A0 - || verstep == LM85_VERSTEP_EMC6D100_A1) ) { - /* Unfortunately, we can't tell a '100 from a '101 - * from the registers. Since a '101 is a '100 - * in a package with fewer pins and therefore no - * 3.3V, 1.5V or 1.8V inputs, perhaps if those - * inputs read 0, then it's a '101. - */ - kind = emc6d100 ; - } else if( company == LM85_COMPANY_SMSC - && verstep == LM85_VERSTEP_EMC6D102) { - kind = emc6d102 ; - } else if( company == LM85_COMPANY_SMSC - && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) { - dev_err(&adapter->dev, "lm85: Detected SMSC chip\n"); - dev_err(&adapter->dev, "lm85: Unrecognized version/stepping 0x%02x" - " Defaulting to Generic LM85.\n", verstep ); - kind = any_chip ; - } else if( kind == any_chip - && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) { - dev_err(&adapter->dev, "Generic LM85 Version 6 detected\n"); - /* Leave kind as "any_chip" */ - } else { - dev_dbg(&adapter->dev, "Autodetection failed\n"); - /* Not an LM85 ... */ - if( kind == any_chip ) { /* User used force=x,y */ - dev_err(&adapter->dev, "Generic LM85 Version 6 not" - " found at %d,0x%02x. Try force_lm85c.\n", - i2c_adapter_id(adapter), address ); - } - err = 0 ; - goto ERROR1; - } - } - - /* Fill in the chip specific driver values */ - if ( kind == any_chip ) { - type_name = "lm85"; - } else if ( kind == lm85b ) { - type_name = "lm85b"; - } else if ( kind == lm85c ) { - type_name = "lm85c"; - } else if ( kind == adm1027 ) { - type_name = "adm1027"; - } else if ( kind == adt7463 ) { - type_name = "adt7463"; - } else if ( kind == emc6d100){ - type_name = "emc6d100"; - } else if ( kind == emc6d102 ) { - type_name = "emc6d102"; - } - strlcpy(new_client->name, type_name, I2C_NAME_SIZE); - - /* Fill in the remaining client fields */ - data->type = kind; - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto ERROR1; - - /* Set the VRM version */ - data->vrm = i2c_which_vrm(); - - /* Initialize the LM85 chip */ - lm85_init_client(new_client); - - /* Register sysfs hooks */ - device_create_file(&new_client->dev, &dev_attr_fan1_input); - device_create_file(&new_client->dev, &dev_attr_fan2_input); - device_create_file(&new_client->dev, &dev_attr_fan3_input); - device_create_file(&new_client->dev, &dev_attr_fan4_input); - device_create_file(&new_client->dev, &dev_attr_fan1_min); - device_create_file(&new_client->dev, &dev_attr_fan2_min); - device_create_file(&new_client->dev, &dev_attr_fan3_min); - device_create_file(&new_client->dev, &dev_attr_fan4_min); - device_create_file(&new_client->dev, &dev_attr_pwm1); - device_create_file(&new_client->dev, &dev_attr_pwm2); - device_create_file(&new_client->dev, &dev_attr_pwm3); - device_create_file(&new_client->dev, &dev_attr_pwm1_enable); - device_create_file(&new_client->dev, &dev_attr_pwm2_enable); - device_create_file(&new_client->dev, &dev_attr_pwm3_enable); - device_create_file(&new_client->dev, &dev_attr_in0_input); - device_create_file(&new_client->dev, &dev_attr_in1_input); - device_create_file(&new_client->dev, &dev_attr_in2_input); - device_create_file(&new_client->dev, &dev_attr_in3_input); - device_create_file(&new_client->dev, &dev_attr_in4_input); - device_create_file(&new_client->dev, &dev_attr_in0_min); - device_create_file(&new_client->dev, &dev_attr_in1_min); - device_create_file(&new_client->dev, &dev_attr_in2_min); - device_create_file(&new_client->dev, &dev_attr_in3_min); - device_create_file(&new_client->dev, &dev_attr_in4_min); - device_create_file(&new_client->dev, &dev_attr_in0_max); - device_create_file(&new_client->dev, &dev_attr_in1_max); - device_create_file(&new_client->dev, &dev_attr_in2_max); - device_create_file(&new_client->dev, &dev_attr_in3_max); - device_create_file(&new_client->dev, &dev_attr_in4_max); - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp2_input); - device_create_file(&new_client->dev, &dev_attr_temp3_input); - device_create_file(&new_client->dev, &dev_attr_temp1_min); - device_create_file(&new_client->dev, &dev_attr_temp2_min); - device_create_file(&new_client->dev, &dev_attr_temp3_min); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp2_max); - device_create_file(&new_client->dev, &dev_attr_temp3_max); - device_create_file(&new_client->dev, &dev_attr_vrm); - device_create_file(&new_client->dev, &dev_attr_cpu0_vid); - device_create_file(&new_client->dev, &dev_attr_alarms); - device_create_file(&new_client->dev, &dev_attr_pwm1_auto_channels); - device_create_file(&new_client->dev, &dev_attr_pwm2_auto_channels); - device_create_file(&new_client->dev, &dev_attr_pwm3_auto_channels); - device_create_file(&new_client->dev, &dev_attr_pwm1_auto_pwm_min); - device_create_file(&new_client->dev, &dev_attr_pwm2_auto_pwm_min); - device_create_file(&new_client->dev, &dev_attr_pwm3_auto_pwm_min); - device_create_file(&new_client->dev, &dev_attr_pwm1_auto_pwm_minctl); - device_create_file(&new_client->dev, &dev_attr_pwm2_auto_pwm_minctl); - device_create_file(&new_client->dev, &dev_attr_pwm3_auto_pwm_minctl); - device_create_file(&new_client->dev, &dev_attr_pwm1_auto_pwm_freq); - device_create_file(&new_client->dev, &dev_attr_pwm2_auto_pwm_freq); - device_create_file(&new_client->dev, &dev_attr_pwm3_auto_pwm_freq); - device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_off); - device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_off); - device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_off); - device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_min); - device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_min); - device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_min); - device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_max); - device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_max); - device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_max); - device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_crit); - device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_crit); - device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_crit); - - return 0; - - /* Error out and cleanup code */ - ERROR1: - kfree(data); - ERROR0: - return err; -} - -int lm85_detach_client(struct i2c_client *client) -{ - i2c_detach_client(client); - kfree(i2c_get_clientdata(client)); - return 0; -} - - -int lm85_read_value(struct i2c_client *client, u8 reg) -{ - int res; - - /* What size location is it? */ - switch( reg ) { - case LM85_REG_FAN(0) : /* Read WORD data */ - case LM85_REG_FAN(1) : - case LM85_REG_FAN(2) : - case LM85_REG_FAN(3) : - case LM85_REG_FAN_MIN(0) : - case LM85_REG_FAN_MIN(1) : - case LM85_REG_FAN_MIN(2) : - case LM85_REG_FAN_MIN(3) : - case LM85_REG_ALARM1 : /* Read both bytes at once */ - res = i2c_smbus_read_byte_data(client, reg) & 0xff ; - res |= i2c_smbus_read_byte_data(client, reg+1) << 8 ; - break ; - case ADT7463_REG_TMIN_CTL1 : /* Read WORD MSB, LSB */ - res = i2c_smbus_read_byte_data(client, reg) << 8 ; - res |= i2c_smbus_read_byte_data(client, reg+1) & 0xff ; - break ; - default: /* Read BYTE data */ - res = i2c_smbus_read_byte_data(client, reg); - break ; - } - - return res ; -} - -int lm85_write_value(struct i2c_client *client, u8 reg, int value) -{ - int res ; - - switch( reg ) { - case LM85_REG_FAN(0) : /* Write WORD data */ - case LM85_REG_FAN(1) : - case LM85_REG_FAN(2) : - case LM85_REG_FAN(3) : - case LM85_REG_FAN_MIN(0) : - case LM85_REG_FAN_MIN(1) : - case LM85_REG_FAN_MIN(2) : - case LM85_REG_FAN_MIN(3) : - /* NOTE: ALARM is read only, so not included here */ - res = i2c_smbus_write_byte_data(client, reg, value & 0xff) ; - res |= i2c_smbus_write_byte_data(client, reg+1, (value>>8) & 0xff) ; - break ; - case ADT7463_REG_TMIN_CTL1 : /* Write WORD MSB, LSB */ - res = i2c_smbus_write_byte_data(client, reg, (value>>8) & 0xff); - res |= i2c_smbus_write_byte_data(client, reg+1, value & 0xff) ; - break ; - default: /* Write BYTE data */ - res = i2c_smbus_write_byte_data(client, reg, value); - break ; - } - - return res ; -} - -void lm85_init_client(struct i2c_client *client) -{ - int value; - struct lm85_data *data = i2c_get_clientdata(client); - - dev_dbg(&client->dev, "Initializing device\n"); - - /* Warn if part was not "READY" */ - value = lm85_read_value(client, LM85_REG_CONFIG); - dev_dbg(&client->dev, "LM85_REG_CONFIG is: 0x%02x\n", value); - if( value & 0x02 ) { - dev_err(&client->dev, "Client (%d,0x%02x) config is locked.\n", - i2c_adapter_id(client->adapter), client->addr ); - }; - if( ! (value & 0x04) ) { - dev_err(&client->dev, "Client (%d,0x%02x) is not ready.\n", - i2c_adapter_id(client->adapter), client->addr ); - }; - if( value & 0x10 - && ( data->type == adm1027 - || data->type == adt7463 ) ) { - dev_err(&client->dev, "Client (%d,0x%02x) VxI mode is set. " - "Please report this to the lm85 maintainer.\n", - i2c_adapter_id(client->adapter), client->addr ); - }; - - /* WE INTENTIONALLY make no changes to the limits, - * offsets, pwms, fans and zones. If they were - * configured, we don't want to mess with them. - * If they weren't, the default is 100% PWM, no - * control and will suffice until 'sensors -s' - * can be run by the user. - */ - - /* Start monitoring */ - value = lm85_read_value(client, LM85_REG_CONFIG); - /* Try to clear LOCK, Set START, save everything else */ - value = (value & ~ 0x02) | 0x01 ; - dev_dbg(&client->dev, "Setting CONFIG to: 0x%02x\n", value); - lm85_write_value(client, LM85_REG_CONFIG, value); -} - -static struct lm85_data *lm85_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - int i; - - down(&data->update_lock); - - if ( !data->valid || - time_after(jiffies, data->last_reading + LM85_DATA_INTERVAL) ) { - /* Things that change quickly */ - dev_dbg(&client->dev, "Reading sensor values\n"); - - /* Have to read extended bits first to "freeze" the - * more significant bits that are read later. - */ - if ( (data->type == adm1027) || (data->type == adt7463) ) { - int ext1 = lm85_read_value(client, - ADM1027_REG_EXTEND_ADC1); - int ext2 = lm85_read_value(client, - ADM1027_REG_EXTEND_ADC2); - int val = (ext1 << 8) + ext2; - - for(i = 0; i <= 4; i++) - data->in_ext[i] = (val>>(i * 2))&0x03; - - for(i = 0; i <= 2; i++) - data->temp_ext[i] = (val>>((i + 5) * 2))&0x03; - } - - /* adc_scale is 2^(number of LSBs). There are 4 extra bits in - the emc6d102 and 2 in the adt7463 and adm1027. In all - other chips ext is always 0 and the value of scale is - irrelevant. So it is left in 4*/ - data->adc_scale = (data->type == emc6d102 ) ? 16 : 4; - - for (i = 0; i <= 4; ++i) { - data->in[i] = - lm85_read_value(client, LM85_REG_IN(i)); - } - - for (i = 0; i <= 3; ++i) { - data->fan[i] = - lm85_read_value(client, LM85_REG_FAN(i)); - } - - for (i = 0; i <= 2; ++i) { - data->temp[i] = - lm85_read_value(client, LM85_REG_TEMP(i)); - } - - for (i = 0; i <= 2; ++i) { - data->pwm[i] = - lm85_read_value(client, LM85_REG_PWM(i)); - } - - data->alarms = lm85_read_value(client, LM85_REG_ALARM1); - - if ( data->type == adt7463 ) { - if( data->therm_total < ULONG_MAX - 256 ) { - data->therm_total += - lm85_read_value(client, ADT7463_REG_THERM ); - } - } else if ( data->type == emc6d100 ) { - /* Three more voltage sensors */ - for (i = 5; i <= 7; ++i) { - data->in[i] = - lm85_read_value(client, EMC6D100_REG_IN(i)); - } - /* More alarm bits */ - data->alarms |= - lm85_read_value(client, EMC6D100_REG_ALARM3) << 16; - } else if (data->type == emc6d102 ) { - /* Have to read LSB bits after the MSB ones because - the reading of the MSB bits has frozen the - LSBs (backward from the ADM1027). - */ - int ext1 = lm85_read_value(client, - EMC6D102_REG_EXTEND_ADC1); - int ext2 = lm85_read_value(client, - EMC6D102_REG_EXTEND_ADC2); - int ext3 = lm85_read_value(client, - EMC6D102_REG_EXTEND_ADC3); - int ext4 = lm85_read_value(client, - EMC6D102_REG_EXTEND_ADC4); - data->in_ext[0] = ext3 & 0x0f; - data->in_ext[1] = ext4 & 0x0f; - data->in_ext[2] = (ext4 >> 4) & 0x0f; - data->in_ext[3] = (ext3 >> 4) & 0x0f; - data->in_ext[4] = (ext2 >> 4) & 0x0f; - - data->temp_ext[0] = ext1 & 0x0f; - data->temp_ext[1] = ext2 & 0x0f; - data->temp_ext[2] = (ext1 >> 4) & 0x0f; - } - - data->last_reading = jiffies ; - }; /* last_reading */ - - if ( !data->valid || - time_after(jiffies, data->last_config + LM85_CONFIG_INTERVAL) ) { - /* Things that don't change often */ - dev_dbg(&client->dev, "Reading config values\n"); - - for (i = 0; i <= 4; ++i) { - data->in_min[i] = - lm85_read_value(client, LM85_REG_IN_MIN(i)); - data->in_max[i] = - lm85_read_value(client, LM85_REG_IN_MAX(i)); - } - - if ( data->type == emc6d100 ) { - for (i = 5; i <= 7; ++i) { - data->in_min[i] = - lm85_read_value(client, EMC6D100_REG_IN_MIN(i)); - data->in_max[i] = - lm85_read_value(client, EMC6D100_REG_IN_MAX(i)); - } - } - - for (i = 0; i <= 3; ++i) { - data->fan_min[i] = - lm85_read_value(client, LM85_REG_FAN_MIN(i)); - } - - for (i = 0; i <= 2; ++i) { - data->temp_min[i] = - lm85_read_value(client, LM85_REG_TEMP_MIN(i)); - data->temp_max[i] = - lm85_read_value(client, LM85_REG_TEMP_MAX(i)); - } - - data->vid = lm85_read_value(client, LM85_REG_VID); - - for (i = 0; i <= 2; ++i) { - int val ; - data->autofan[i].config = - lm85_read_value(client, LM85_REG_AFAN_CONFIG(i)); - val = lm85_read_value(client, LM85_REG_AFAN_RANGE(i)); - data->autofan[i].freq = val & 0x07 ; - data->zone[i].range = (val >> 4) & 0x0f ; - data->autofan[i].min_pwm = - lm85_read_value(client, LM85_REG_AFAN_MINPWM(i)); - data->zone[i].limit = - lm85_read_value(client, LM85_REG_AFAN_LIMIT(i)); - data->zone[i].critical = - lm85_read_value(client, LM85_REG_AFAN_CRITICAL(i)); - } - - i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1); - data->smooth[0] = i & 0x0f ; - data->syncpwm3 = i & 0x10 ; /* Save PWM3 config */ - data->autofan[0].min_off = (i & 0x20) != 0 ; - data->autofan[1].min_off = (i & 0x40) != 0 ; - data->autofan[2].min_off = (i & 0x80) != 0 ; - i = lm85_read_value(client, LM85_REG_AFAN_SPIKE2); - data->smooth[1] = (i>>4) & 0x0f ; - data->smooth[2] = i & 0x0f ; - - i = lm85_read_value(client, LM85_REG_AFAN_HYST1); - data->zone[0].hyst = (i>>4) & 0x0f ; - data->zone[1].hyst = i & 0x0f ; - - i = lm85_read_value(client, LM85_REG_AFAN_HYST2); - data->zone[2].hyst = (i>>4) & 0x0f ; - - if ( (data->type == lm85b) || (data->type == lm85c) ) { - data->tach_mode = lm85_read_value(client, - LM85_REG_TACH_MODE ); - data->spinup_ctl = lm85_read_value(client, - LM85_REG_SPINUP_CTL ); - } else if ( (data->type == adt7463) || (data->type == adm1027) ) { - if ( data->type == adt7463 ) { - for (i = 0; i <= 2; ++i) { - data->oppoint[i] = lm85_read_value(client, - ADT7463_REG_OPPOINT(i) ); - } - data->tmin_ctl = lm85_read_value(client, - ADT7463_REG_TMIN_CTL1 ); - data->therm_limit = lm85_read_value(client, - ADT7463_REG_THERM_LIMIT ); - } - for (i = 0; i <= 2; ++i) { - data->temp_offset[i] = lm85_read_value(client, - ADM1027_REG_TEMP_OFFSET(i) ); - } - data->tach_mode = lm85_read_value(client, - ADM1027_REG_CONFIG3 ); - data->fan_ppr = lm85_read_value(client, - ADM1027_REG_FAN_PPR ); - } - - data->last_config = jiffies; - }; /* last_config */ - - data->valid = 1; - - up(&data->update_lock); - - return data; -} - - -static int __init sm_lm85_init(void) -{ - return i2c_add_driver(&lm85_driver); -} - -static void __exit sm_lm85_exit(void) -{ - i2c_del_driver(&lm85_driver); -} - -/* Thanks to Richard Barrington for adding the LM85 to sensors-detect. - * Thanks to Margit Schubert-While <margitsw@t-online.de> for help with - * post 2.7.0 CVS changes. - */ -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Philip Pokorny <ppokorny@penguincomputing.com>, Margit Schubert-While <margitsw@t-online.de>, Justin Thiessen <jthiessen@penguincomputing.com"); -MODULE_DESCRIPTION("LM85-B, LM85-C driver"); - -module_init(sm_lm85_init); -module_exit(sm_lm85_exit); |