diff options
Diffstat (limited to 'drivers/i2c/chips/sis5595.c')
| -rw-r--r-- | drivers/i2c/chips/sis5595.c | 817 |
1 files changed, 0 insertions, 817 deletions
diff --git a/drivers/i2c/chips/sis5595.c b/drivers/i2c/chips/sis5595.c deleted file mode 100644 index 6bbfc8fb4f1..00000000000 --- a/drivers/i2c/chips/sis5595.c +++ /dev/null @@ -1,817 +0,0 @@ -/* - sis5595.c - Part of lm_sensors, Linux kernel modules - for hardware monitoring - - Copyright (C) 1998 - 2001 Frodo Looijaard <frodol@dds.nl>, - Kyösti Mälkki <kmalkki@cc.hut.fi>, and - Mark D. Studebaker <mdsxyz123@yahoo.com> - Ported to Linux 2.6 by Aurelien Jarno <aurelien@aurel32.net> with - the help of Jean Delvare <khali@linux-fr.org> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -/* - SiS southbridge has a LM78-like chip integrated on the same IC. - This driver is a customized copy of lm78.c - - Supports following revisions: - Version PCI ID PCI Revision - 1 1039/0008 AF or less - 2 1039/0008 B0 or greater - - Note: these chips contain a 0008 device which is incompatible with the - 5595. We recognize these by the presence of the listed - "blacklist" PCI ID and refuse to load. - - NOT SUPPORTED PCI ID BLACKLIST PCI ID - 540 0008 0540 - 550 0008 0550 - 5513 0008 5511 - 5581 0008 5597 - 5582 0008 5597 - 5597 0008 5597 - 5598 0008 5597/5598 - 630 0008 0630 - 645 0008 0645 - 730 0008 0730 - 735 0008 0735 -*/ - -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/ioport.h> -#include <linux/pci.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> -#include <linux/init.h> -#include <linux/jiffies.h> -#include <asm/io.h> - - -/* If force_addr is set to anything different from 0, we forcibly enable - the device at the given address. */ -static u16 force_addr; -module_param(force_addr, ushort, 0); -MODULE_PARM_DESC(force_addr, - "Initialize the base address of the sensors"); - -/* Addresses to scan. - Note that we can't determine the ISA address until we have initialized - our module */ -static unsigned short normal_i2c[] = { I2C_CLIENT_END }; -static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END }; - -/* Insmod parameters */ -SENSORS_INSMOD_1(sis5595); - -/* Many SIS5595 constants specified below */ - -/* Length of ISA address segment */ -#define SIS5595_EXTENT 8 -/* PCI Config Registers */ -#define SIS5595_REVISION_REG 0x08 -#define SIS5595_BASE_REG 0x68 -#define SIS5595_PIN_REG 0x7A -#define SIS5595_ENABLE_REG 0x7B - -/* Where are the ISA address/data registers relative to the base address */ -#define SIS5595_ADDR_REG_OFFSET 5 -#define SIS5595_DATA_REG_OFFSET 6 - -/* The SIS5595 registers */ -#define SIS5595_REG_IN_MAX(nr) (0x2b + (nr) * 2) -#define SIS5595_REG_IN_MIN(nr) (0x2c + (nr) * 2) -#define SIS5595_REG_IN(nr) (0x20 + (nr)) - -#define SIS5595_REG_FAN_MIN(nr) (0x3b + (nr)) -#define SIS5595_REG_FAN(nr) (0x28 + (nr)) - -/* On the first version of the chip, the temp registers are separate. - On the second version, - TEMP pin is shared with IN4, configured in PCI register 0x7A. - The registers are the same as well. - OVER and HYST are really MAX and MIN. */ - -#define REV2MIN 0xb0 -#define SIS5595_REG_TEMP (( data->revision) >= REV2MIN) ? \ - SIS5595_REG_IN(4) : 0x27 -#define SIS5595_REG_TEMP_OVER (( data->revision) >= REV2MIN) ? \ - SIS5595_REG_IN_MAX(4) : 0x39 -#define SIS5595_REG_TEMP_HYST (( data->revision) >= REV2MIN) ? \ - SIS5595_REG_IN_MIN(4) : 0x3a - -#define SIS5595_REG_CONFIG 0x40 -#define SIS5595_REG_ALARM1 0x41 -#define SIS5595_REG_ALARM2 0x42 -#define SIS5595_REG_FANDIV 0x47 - -/* Conversions. Limit checking is only done on the TO_REG - variants. */ - -/* IN: mV, (0V to 4.08V) - REG: 16mV/bit */ -static inline u8 IN_TO_REG(unsigned long val) -{ - unsigned long nval = SENSORS_LIMIT(val, 0, 4080); - return (nval + 8) / 16; -} -#define IN_FROM_REG(val) ((val) * 16) - -static inline u8 FAN_TO_REG(long rpm, int div) -{ - if (rpm <= 0) - return 255; - return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254); -} - -static inline int FAN_FROM_REG(u8 val, int div) -{ - return val==0 ? -1 : val==255 ? 0 : 1350000/(val*div); -} - -/* TEMP: mC (-54.12C to +157.53C) - REG: 0.83C/bit + 52.12, two's complement */ -static inline int TEMP_FROM_REG(s8 val) -{ - return val * 830 + 52120; -} -static inline s8 TEMP_TO_REG(int val) -{ - int nval = SENSORS_LIMIT(val, -54120, 157530) ; - return nval<0 ? (nval-5212-415)/830 : (nval-5212+415)/830; -} - -/* FAN DIV: 1, 2, 4, or 8 (defaults to 2) - REG: 0, 1, 2, or 3 (respectively) (defaults to 1) */ -static inline u8 DIV_TO_REG(int val) -{ - return val==8 ? 3 : val==4 ? 2 : val==1 ? 0 : 1; -} -#define DIV_FROM_REG(val) (1 << (val)) - -/* For the SIS5595, we need to keep some data in memory. That - data is pointed to by sis5595_list[NR]->data. The structure itself is - dynamically allocated, at the time when the new sis5595 client is - allocated. */ -struct sis5595_data { - struct i2c_client client; - struct semaphore lock; - - struct semaphore update_lock; - char valid; /* !=0 if following fields are valid */ - unsigned long last_updated; /* In jiffies */ - char maxins; /* == 3 if temp enabled, otherwise == 4 */ - u8 revision; /* Reg. value */ - - u8 in[5]; /* Register value */ - u8 in_max[5]; /* Register value */ - u8 in_min[5]; /* Register value */ - u8 fan[2]; /* Register value */ - u8 fan_min[2]; /* Register value */ - s8 temp; /* Register value */ - s8 temp_over; /* Register value */ - s8 temp_hyst; /* Register value */ - u8 fan_div[2]; /* Register encoding, shifted right */ - u16 alarms; /* Register encoding, combined */ -}; - -static struct pci_dev *s_bridge; /* pointer to the (only) sis5595 */ - -static int sis5595_attach_adapter(struct i2c_adapter *adapter); -static int sis5595_detect(struct i2c_adapter *adapter, int address, int kind); -static int sis5595_detach_client(struct i2c_client *client); - -static int sis5595_read_value(struct i2c_client *client, u8 register); -static int sis5595_write_value(struct i2c_client *client, u8 register, u8 value); -static struct sis5595_data *sis5595_update_device(struct device *dev); -static void sis5595_init_client(struct i2c_client *client); - -static struct i2c_driver sis5595_driver = { - .owner = THIS_MODULE, - .name = "sis5595", - .id = I2C_DRIVERID_SIS5595, - .flags = I2C_DF_NOTIFY, - .attach_adapter = sis5595_attach_adapter, - .detach_client = sis5595_detach_client, -}; - -/* 4 Voltages */ -static ssize_t show_in(struct device *dev, char *buf, int nr) -{ - struct sis5595_data *data = sis5595_update_device(dev); - return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr])); -} - -static ssize_t show_in_min(struct device *dev, char *buf, int nr) -{ - struct sis5595_data *data = sis5595_update_device(dev); - return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr])); -} - -static ssize_t show_in_max(struct device *dev, char *buf, int nr) -{ - struct sis5595_data *data = sis5595_update_device(dev); - return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr])); -} - -static ssize_t set_in_min(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct sis5595_data *data = i2c_get_clientdata(client); - unsigned long val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - data->in_min[nr] = IN_TO_REG(val); - sis5595_write_value(client, SIS5595_REG_IN_MIN(nr), data->in_min[nr]); - up(&data->update_lock); - return count; -} - -static ssize_t set_in_max(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct sis5595_data *data = i2c_get_clientdata(client); - unsigned long val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - data->in_max[nr] = IN_TO_REG(val); - sis5595_write_value(client, SIS5595_REG_IN_MAX(nr), data->in_max[nr]); - up(&data->update_lock); - return count; -} - -#define show_in_offset(offset) \ -static ssize_t \ - show_in##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_in(dev, buf, offset); \ -} \ -static DEVICE_ATTR(in##offset##_input, S_IRUGO, \ - show_in##offset, NULL); \ -static ssize_t \ - show_in##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_in_min(dev, buf, offset); \ -} \ -static ssize_t \ - show_in##offset##_max (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_in_max(dev, buf, offset); \ -} \ -static ssize_t set_in##offset##_min (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_in_min(dev, buf, count, offset); \ -} \ -static ssize_t set_in##offset##_max (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_in_max(dev, buf, count, offset); \ -} \ -static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ - show_in##offset##_min, set_in##offset##_min); \ -static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ - show_in##offset##_max, set_in##offset##_max); - -show_in_offset(0); -show_in_offset(1); -show_in_offset(2); -show_in_offset(3); -show_in_offset(4); - -/* Temperature */ -static ssize_t show_temp(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct sis5595_data *data = sis5595_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp)); -} - -static ssize_t show_temp_over(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct sis5595_data *data = sis5595_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over)); -} - -static ssize_t set_temp_over(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct sis5595_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->temp_over = TEMP_TO_REG(val); - sis5595_write_value(client, SIS5595_REG_TEMP_OVER, data->temp_over); - up(&data->update_lock); - return count; -} - -static ssize_t show_temp_hyst(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct sis5595_data *data = sis5595_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_hyst)); -} - -static ssize_t set_temp_hyst(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct sis5595_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->temp_hyst = TEMP_TO_REG(val); - sis5595_write_value(client, SIS5595_REG_TEMP_HYST, data->temp_hyst); - up(&data->update_lock); - return count; -} - -static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL); -static DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, - show_temp_over, set_temp_over); -static DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR, - show_temp_hyst, set_temp_hyst); - -/* 2 Fans */ -static ssize_t show_fan(struct device *dev, char *buf, int nr) -{ - struct sis5595_data *data = sis5595_update_device(dev); - return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr], - DIV_FROM_REG(data->fan_div[nr])) ); -} - -static ssize_t show_fan_min(struct device *dev, char *buf, int nr) -{ - struct sis5595_data *data = sis5595_update_device(dev); - return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr], - DIV_FROM_REG(data->fan_div[nr])) ); -} - -static ssize_t set_fan_min(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct sis5595_data *data = i2c_get_clientdata(client); - unsigned long val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); - sis5595_write_value(client, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]); - up(&data->update_lock); - return count; -} - -static ssize_t show_fan_div(struct device *dev, char *buf, int nr) -{ - struct sis5595_data *data = sis5595_update_device(dev); - return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]) ); -} - -/* Note: we save and restore the fan minimum here, because its value is - determined in part by the fan divisor. This follows the principle of - least suprise; the user doesn't expect the fan minimum to change just - because the divisor changed. */ -static ssize_t set_fan_div(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct sis5595_data *data = i2c_get_clientdata(client); - unsigned long min; - unsigned long val = simple_strtoul(buf, NULL, 10); - int reg; - - down(&data->update_lock); - min = FAN_FROM_REG(data->fan_min[nr], - DIV_FROM_REG(data->fan_div[nr])); - reg = sis5595_read_value(client, SIS5595_REG_FANDIV); - - switch (val) { - case 1: data->fan_div[nr] = 0; break; - case 2: data->fan_div[nr] = 1; break; - case 4: data->fan_div[nr] = 2; break; - case 8: data->fan_div[nr] = 3; break; - default: - dev_err(&client->dev, "fan_div value %ld not " - "supported. Choose one of 1, 2, 4 or 8!\n", val); - up(&data->update_lock); - return -EINVAL; - } - - switch (nr) { - case 0: - reg = (reg & 0xcf) | (data->fan_div[nr] << 4); - break; - case 1: - reg = (reg & 0x3f) | (data->fan_div[nr] << 6); - break; - } - sis5595_write_value(client, SIS5595_REG_FANDIV, reg); - data->fan_min[nr] = - FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); - sis5595_write_value(client, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]); - up(&data->update_lock); - return count; -} - -#define show_fan_offset(offset) \ -static ssize_t show_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan(dev, buf, offset - 1); \ -} \ -static ssize_t show_fan_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan_min(dev, buf, offset - 1); \ -} \ -static ssize_t show_fan_##offset##_div (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan_div(dev, buf, offset - 1); \ -} \ -static ssize_t set_fan_##offset##_min (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_fan_min(dev, buf, count, offset - 1); \ -} \ -static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, NULL);\ -static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_fan_##offset##_min, set_fan_##offset##_min); - -show_fan_offset(1); -show_fan_offset(2); - -static ssize_t set_fan_1_div(struct device *dev, struct device_attribute *attr, const char *buf, - size_t count) -{ - return set_fan_div(dev, buf, count, 0) ; -} - -static ssize_t set_fan_2_div(struct device *dev, struct device_attribute *attr, const char *buf, - size_t count) -{ - return set_fan_div(dev, buf, count, 1) ; -} -static DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR, - show_fan_1_div, set_fan_1_div); -static DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR, - show_fan_2_div, set_fan_2_div); - -/* Alarms */ -static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct sis5595_data *data = sis5595_update_device(dev); - return sprintf(buf, "%d\n", data->alarms); -} -static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); - -/* This is called when the module is loaded */ -static int sis5595_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, sis5595_detect); -} - -int sis5595_detect(struct i2c_adapter *adapter, int address, int kind) -{ - int err = 0; - int i; - struct i2c_client *new_client; - struct sis5595_data *data; - char val; - u16 a; - - /* Make sure we are probing the ISA bus!! */ - if (!i2c_is_isa_adapter(adapter)) - goto exit; - - if (force_addr) - address = force_addr & ~(SIS5595_EXTENT - 1); - /* Reserve the ISA region */ - if (!request_region(address, SIS5595_EXTENT, sis5595_driver.name)) { - err = -EBUSY; - goto exit; - } - if (force_addr) { - dev_warn(&adapter->dev, "forcing ISA address 0x%04X\n", address); - if (PCIBIOS_SUCCESSFUL != - pci_write_config_word(s_bridge, SIS5595_BASE_REG, address)) - goto exit_release; - if (PCIBIOS_SUCCESSFUL != - pci_read_config_word(s_bridge, SIS5595_BASE_REG, &a)) - goto exit_release; - if ((a & ~(SIS5595_EXTENT - 1)) != address) - /* doesn't work for some chips? */ - goto exit_release; - } - - if (PCIBIOS_SUCCESSFUL != - pci_read_config_byte(s_bridge, SIS5595_ENABLE_REG, &val)) { - goto exit_release; - } - if ((val & 0x80) == 0) { - if (PCIBIOS_SUCCESSFUL != - pci_write_config_byte(s_bridge, SIS5595_ENABLE_REG, - val | 0x80)) - goto exit_release; - if (PCIBIOS_SUCCESSFUL != - pci_read_config_byte(s_bridge, SIS5595_ENABLE_REG, &val)) - goto exit_release; - if ((val & 0x80) == 0) - /* doesn't work for some chips! */ - goto exit_release; - } - - if (!(data = kmalloc(sizeof(struct sis5595_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit_release; - } - memset(data, 0, sizeof(struct sis5595_data)); - - new_client = &data->client; - new_client->addr = address; - init_MUTEX(&data->lock); - i2c_set_clientdata(new_client, data); - new_client->adapter = adapter; - new_client->driver = &sis5595_driver; - new_client->flags = 0; - - /* Check revision and pin registers to determine whether 4 or 5 voltages */ - pci_read_config_byte(s_bridge, SIS5595_REVISION_REG, &(data->revision)); - /* 4 voltages, 1 temp */ - data->maxins = 3; - if (data->revision >= REV2MIN) { - pci_read_config_byte(s_bridge, SIS5595_PIN_REG, &val); - if (!(val & 0x80)) - /* 5 voltages, no temps */ - data->maxins = 4; - } - - /* Fill in the remaining client fields and put it into the global list */ - strlcpy(new_client->name, "sis5595", I2C_NAME_SIZE); - - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - - /* Initialize the SIS5595 chip */ - sis5595_init_client(new_client); - - /* A few vars need to be filled upon startup */ - for (i = 0; i < 2; i++) { - data->fan_min[i] = sis5595_read_value(new_client, - SIS5595_REG_FAN_MIN(i)); - } - - /* Register sysfs hooks */ - device_create_file(&new_client->dev, &dev_attr_in0_input); - device_create_file(&new_client->dev, &dev_attr_in0_min); - device_create_file(&new_client->dev, &dev_attr_in0_max); - device_create_file(&new_client->dev, &dev_attr_in1_input); - device_create_file(&new_client->dev, &dev_attr_in1_min); - device_create_file(&new_client->dev, &dev_attr_in1_max); - device_create_file(&new_client->dev, &dev_attr_in2_input); - device_create_file(&new_client->dev, &dev_attr_in2_min); - device_create_file(&new_client->dev, &dev_attr_in2_max); - device_create_file(&new_client->dev, &dev_attr_in3_input); - device_create_file(&new_client->dev, &dev_attr_in3_min); - device_create_file(&new_client->dev, &dev_attr_in3_max); - if (data->maxins == 4) { - device_create_file(&new_client->dev, &dev_attr_in4_input); - device_create_file(&new_client->dev, &dev_attr_in4_min); - device_create_file(&new_client->dev, &dev_attr_in4_max); - } - device_create_file(&new_client->dev, &dev_attr_fan1_input); - device_create_file(&new_client->dev, &dev_attr_fan1_min); - device_create_file(&new_client->dev, &dev_attr_fan1_div); - device_create_file(&new_client->dev, &dev_attr_fan2_input); - device_create_file(&new_client->dev, &dev_attr_fan2_min); - device_create_file(&new_client->dev, &dev_attr_fan2_div); - device_create_file(&new_client->dev, &dev_attr_alarms); - if (data->maxins == 3) { - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); - } - return 0; - -exit_free: - kfree(data); -exit_release: - release_region(address, SIS5595_EXTENT); -exit: - return err; -} - -static int sis5595_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, - "Client deregistration failed, client not detached.\n"); - return err; - } - - if (i2c_is_isa_client(client)) - release_region(client->addr, SIS5595_EXTENT); - - kfree(i2c_get_clientdata(client)); - - return 0; -} - - -/* ISA access must be locked explicitly. */ -static int sis5595_read_value(struct i2c_client *client, u8 reg) -{ - int res; - - struct sis5595_data *data = i2c_get_clientdata(client); - down(&data->lock); - outb_p(reg, client->addr + SIS5595_ADDR_REG_OFFSET); - res = inb_p(client->addr + SIS5595_DATA_REG_OFFSET); - up(&data->lock); - return res; -} - -static int sis5595_write_value(struct i2c_client *client, u8 reg, u8 value) -{ - struct sis5595_data *data = i2c_get_clientdata(client); - down(&data->lock); - outb_p(reg, client->addr + SIS5595_ADDR_REG_OFFSET); - outb_p(value, client->addr + SIS5595_DATA_REG_OFFSET); - up(&data->lock); - return 0; -} - -/* Called when we have found a new SIS5595. */ -static void sis5595_init_client(struct i2c_client *client) -{ - u8 config = sis5595_read_value(client, SIS5595_REG_CONFIG); - if (!(config & 0x01)) - sis5595_write_value(client, SIS5595_REG_CONFIG, - (config & 0xf7) | 0x01); -} - -static struct sis5595_data *sis5595_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct sis5595_data *data = i2c_get_clientdata(client); - int i; - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ + HZ / 2) - || !data->valid) { - - for (i = 0; i <= data->maxins; i++) { - data->in[i] = - sis5595_read_value(client, SIS5595_REG_IN(i)); - data->in_min[i] = - sis5595_read_value(client, - SIS5595_REG_IN_MIN(i)); - data->in_max[i] = - sis5595_read_value(client, - SIS5595_REG_IN_MAX(i)); - } - for (i = 0; i < 2; i++) { - data->fan[i] = - sis5595_read_value(client, SIS5595_REG_FAN(i)); - data->fan_min[i] = - sis5595_read_value(client, - SIS5595_REG_FAN_MIN(i)); - } - if (data->maxins == 3) { - data->temp = - sis5595_read_value(client, SIS5595_REG_TEMP); - data->temp_over = - sis5595_read_value(client, SIS5595_REG_TEMP_OVER); - data->temp_hyst = - sis5595_read_value(client, SIS5595_REG_TEMP_HYST); - } - i = sis5595_read_value(client, SIS5595_REG_FANDIV); - data->fan_div[0] = (i >> 4) & 0x03; - data->fan_div[1] = i >> 6; - data->alarms = - sis5595_read_value(client, SIS5595_REG_ALARM1) | - (sis5595_read_value(client, SIS5595_REG_ALARM2) << 8); - data->last_updated = jiffies; - data->valid = 1; - } - - up(&data->update_lock); - - return data; -} - -static struct pci_device_id sis5595_pci_ids[] = { - { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) }, - { 0, } -}; - -MODULE_DEVICE_TABLE(pci, sis5595_pci_ids); - -static int blacklist[] __devinitdata = { - PCI_DEVICE_ID_SI_540, - PCI_DEVICE_ID_SI_550, - PCI_DEVICE_ID_SI_630, - PCI_DEVICE_ID_SI_645, - PCI_DEVICE_ID_SI_730, - PCI_DEVICE_ID_SI_735, - PCI_DEVICE_ID_SI_5511, /* 5513 chip has the 0008 device but - that ID shows up in other chips so we - use the 5511 ID for recognition */ - PCI_DEVICE_ID_SI_5597, - PCI_DEVICE_ID_SI_5598, - 0 }; - -static int __devinit sis5595_pci_probe(struct pci_dev *dev, - const struct pci_device_id *id) -{ - u16 val; - int *i; - int addr = 0; - - for (i = blacklist; *i != 0; i++) { - struct pci_dev *dev; - dev = pci_get_device(PCI_VENDOR_ID_SI, *i, NULL); - if (dev) { - dev_err(&dev->dev, "Looked for SIS5595 but found unsupported device %.4x\n", *i); - pci_dev_put(dev); - return -ENODEV; - } - } - - if (PCIBIOS_SUCCESSFUL != - pci_read_config_word(dev, SIS5595_BASE_REG, &val)) - return -ENODEV; - - addr = val & ~(SIS5595_EXTENT - 1); - if (addr == 0 && force_addr == 0) { - dev_err(&dev->dev, "Base address not set - upgrade BIOS or use force_addr=0xaddr\n"); - return -ENODEV; - } - if (force_addr) - addr = force_addr; /* so detect will get called */ - - if (!addr) { - dev_err(&dev->dev,"No SiS 5595 sensors found.\n"); - return -ENODEV; - } - normal_isa[0] = addr; - - s_bridge = pci_dev_get(dev); - if (i2c_add_driver(&sis5595_driver)) { - pci_dev_put(s_bridge); - s_bridge = NULL; - } - - /* Always return failure here. This is to allow other drivers to bind - * to this pci device. We don't really want to have control over the - * pci device, we only wanted to read as few register values from it. - */ - return -ENODEV; -} - -static struct pci_driver sis5595_pci_driver = { - .name = "sis5595", - .id_table = sis5595_pci_ids, - .probe = sis5595_pci_probe, -}; - -static int __init sm_sis5595_init(void) -{ - return pci_register_driver(&sis5595_pci_driver); -} - -static void __exit sm_sis5595_exit(void) -{ - pci_unregister_driver(&sis5595_pci_driver); - if (s_bridge != NULL) { - i2c_del_driver(&sis5595_driver); - pci_dev_put(s_bridge); - s_bridge = NULL; - } -} - -MODULE_AUTHOR("Aurelien Jarno <aurelien@aurel32.net>"); -MODULE_DESCRIPTION("SiS 5595 Sensor device"); -MODULE_LICENSE("GPL"); - -module_init(sm_sis5595_init); -module_exit(sm_sis5595_exit); |