diff options
Diffstat (limited to 'drivers/i2c')
-rw-r--r-- | drivers/i2c/algos/i2c-algo-pcf.c | 21 | ||||
-rw-r--r-- | drivers/i2c/busses/Kconfig | 1 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-cpm.c | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-elektor.c | 3 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-highlander.c | 4 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-hydra.c | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-i801.c | 3 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-parport.c | 4 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-pmcmsp.c | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-pxa.c | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-s3c2410.c | 22 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-sh_mobile.c | 76 | ||||
-rw-r--r-- | drivers/i2c/busses/scx200_i2c.c | 1 | ||||
-rw-r--r-- | drivers/i2c/chips/Kconfig | 2 | ||||
-rw-r--r-- | drivers/i2c/chips/Makefile | 3 | ||||
-rw-r--r-- | drivers/i2c/chips/isp1301_omap.c | 65 | ||||
-rw-r--r-- | drivers/i2c/i2c-core.c | 5 |
17 files changed, 140 insertions, 78 deletions
diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c index 1e328d19cd6..3e01992230b 100644 --- a/drivers/i2c/algos/i2c-algo-pcf.c +++ b/drivers/i2c/algos/i2c-algo-pcf.c @@ -135,7 +135,7 @@ static int wait_for_pin(struct i2c_algo_pcf_data *adap, int *status) { *status = get_pcf(adap, 1); #ifndef STUB_I2C while (timeout-- && (*status & I2C_PCF_PIN)) { - adap->waitforpin(); + adap->waitforpin(adap->data); *status = get_pcf(adap, 1); } if (*status & I2C_PCF_LAB) { @@ -208,7 +208,7 @@ static int pcf_init_8584 (struct i2c_algo_pcf_data *adap) return -ENXIO; } - printk(KERN_DEBUG "i2c-algo-pcf.o: deteted and initialized PCF8584.\n"); + printk(KERN_DEBUG "i2c-algo-pcf.o: detected and initialized PCF8584.\n"); return 0; } @@ -331,13 +331,16 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap, int i; int ret=0, timeout, status; + if (adap->xfer_begin) + adap->xfer_begin(adap->data); /* Check for bus busy */ timeout = wait_for_bb(adap); if (timeout) { DEB2(printk(KERN_ERR "i2c-algo-pcf.o: " "Timeout waiting for BB in pcf_xfer\n");) - return -EIO; + i = -EIO; + goto out; } for (i = 0;ret >= 0 && i < num; i++) { @@ -359,12 +362,14 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap, if (timeout) { if (timeout == -EINTR) { /* arbitration lost */ - return (-EINTR); + i = -EINTR; + goto out; } i2c_stop(adap); DEB2(printk(KERN_ERR "i2c-algo-pcf.o: Timeout waiting " "for PIN(1) in pcf_xfer\n");) - return (-EREMOTEIO); + i = -EREMOTEIO; + goto out; } #ifndef STUB_I2C @@ -372,7 +377,8 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap, if (status & I2C_PCF_LRB) { i2c_stop(adap); DEB2(printk(KERN_ERR "i2c-algo-pcf.o: No LRB(1) in pcf_xfer\n");) - return (-EREMOTEIO); + i = -EREMOTEIO; + goto out; } #endif @@ -404,6 +410,9 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap, } } +out: + if (adap->xfer_end) + adap->xfer_end(adap->data); return (i); } diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index acadbc51fc0..7f95905bbb9 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -97,6 +97,7 @@ config I2C_I801 ICH9 Tolapai ICH10 + PCH This driver can also be built as a module. If so, the module will be called i2c-i801. diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c index 8164de1f4d7..3fcf78e906d 100644 --- a/drivers/i2c/busses/i2c-cpm.c +++ b/drivers/i2c/busses/i2c-cpm.c @@ -365,6 +365,7 @@ static int cpm_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) pmsg = &msgs[tptr]; if (pmsg->flags & I2C_M_RD) ret = wait_event_interruptible_timeout(cpm->i2c_wait, + (in_be16(&tbdf[tptr].cbd_sc) & BD_SC_NAK) || !(in_be16(&rbdf[rptr].cbd_sc) & BD_SC_EMPTY), 1 * HZ); else @@ -423,7 +424,6 @@ static const struct i2c_adapter cpm_ops = { .owner = THIS_MODULE, .name = "i2c-cpm", .algo = &cpm_i2c_algo, - .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, }; static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm) diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c index 7f38c01fb3a..0ed3ccb81b6 100644 --- a/drivers/i2c/busses/i2c-elektor.c +++ b/drivers/i2c/busses/i2c-elektor.c @@ -104,7 +104,8 @@ static int pcf_isa_getclock(void *data) return (clock); } -static void pcf_isa_waitforpin(void) { +static void pcf_isa_waitforpin(void *data) +{ DEFINE_WAIT(wait); int timeout = 2; unsigned long flags; diff --git a/drivers/i2c/busses/i2c-highlander.c b/drivers/i2c/busses/i2c-highlander.c index f4d22ae9d29..e5a8dae4a28 100644 --- a/drivers/i2c/busses/i2c-highlander.c +++ b/drivers/i2c/busses/i2c-highlander.c @@ -92,7 +92,7 @@ static void highlander_i2c_setup(struct highlander_i2c_dev *dev) static void smbus_write_data(u8 *src, u16 *dst, int len) { for (; len > 1; len -= 2) { - *dst++ = be16_to_cpup((u16 *)src); + *dst++ = be16_to_cpup((__be16 *)src); src += 2; } @@ -103,7 +103,7 @@ static void smbus_write_data(u8 *src, u16 *dst, int len) static void smbus_read_data(u16 *src, u8 *dst, int len) { for (; len > 1; len -= 2) { - *(u16 *)dst = cpu_to_be16p(src++); + *(__be16 *)dst = cpu_to_be16p(src++); dst += 2; } diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c index 1098f21ace1..648aa7baff8 100644 --- a/drivers/i2c/busses/i2c-hydra.c +++ b/drivers/i2c/busses/i2c-hydra.c @@ -123,7 +123,7 @@ static int __devinit hydra_probe(struct pci_dev *dev, hydra_adap.name)) return -EBUSY; - hydra_bit_data.data = ioremap(base, pci_resource_len(dev, 0)); + hydra_bit_data.data = pci_ioremap_bar(dev, 0); if (hydra_bit_data.data == NULL) { release_mem_region(base+offsetof(struct Hydra, CachePD), 4); return -ENODEV; diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index dc7ea32b69a..5123eb69a97 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -41,6 +41,7 @@ Tolapai 0x5032 32 hard yes yes yes ICH10 0x3a30 32 hard yes yes yes ICH10 0x3a60 32 hard yes yes yes + PCH 0x3b30 32 hard yes yes yes Features supported by this driver: Software PEC no @@ -576,6 +577,7 @@ static struct pci_device_id i801_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TOLAPAI_1) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PCH_SMBUS) }, { 0, } }; @@ -599,6 +601,7 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id case PCI_DEVICE_ID_INTEL_TOLAPAI_1: case PCI_DEVICE_ID_INTEL_ICH10_4: case PCI_DEVICE_ID_INTEL_ICH10_5: + case PCI_DEVICE_ID_INTEL_PCH_SMBUS: i801_features |= FEATURE_I2C_BLOCK_READ; /* fall through */ case PCI_DEVICE_ID_INTEL_82801DB_3: diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c index 59ba2086d2f..a257cd5cd13 100644 --- a/drivers/i2c/busses/i2c-parport.c +++ b/drivers/i2c/busses/i2c-parport.c @@ -189,8 +189,6 @@ static void i2c_parport_attach (struct parport *port) if (adapter_parm[type].init.val) line_set(port, 1, &adapter_parm[type].init); - parport_release(adapter->pdev); - if (i2c_bit_add_bus(&adapter->adapter) < 0) { printk(KERN_ERR "i2c-parport: Unable to register with I2C\n"); goto ERROR1; @@ -202,6 +200,7 @@ static void i2c_parport_attach (struct parport *port) return; ERROR1: + parport_release(adapter->pdev); parport_unregister_device(adapter->pdev); ERROR0: kfree(adapter); @@ -221,6 +220,7 @@ static void i2c_parport_detach (struct parport *port) if (adapter_parm[type].init.val) line_set(port, 0, &adapter_parm[type].init); + parport_release(adapter->pdev); parport_unregister_device(adapter->pdev); if (prev) prev->next = adapter->next; diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c index dcf2045b522..0bdb2d7f057 100644 --- a/drivers/i2c/busses/i2c-pmcmsp.c +++ b/drivers/i2c/busses/i2c-pmcmsp.c @@ -486,7 +486,7 @@ static enum pmcmsptwi_xfer_result pmcmsptwi_xfer_cmd( if (cmd->type == MSP_TWI_CMD_WRITE || cmd->type == MSP_TWI_CMD_WRITE_READ) { - __be64 tmp = cpu_to_be64p((u64 *)cmd->write_data); + u64 tmp = be64_to_cpup((__be64 *)cmd->write_data); tmp >>= (MSP_MAX_BYTES_PER_RW - cmd->write_len) * 8; dev_dbg(&pmcmsptwi_adapter.dev, "Writing 0x%016llx\n", tmp); pmcmsptwi_writel(tmp & 0x00000000ffffffffLL, diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 906f9b9d715..587f5b2380d 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -1016,7 +1016,7 @@ static int i2c_pxa_probe(struct platform_device *dev) snprintf(i2c->adap.name, sizeof(i2c->adap.name), "pxa_i2c-i2c.%u", i2c->adap.nr); - i2c->clk = clk_get(&dev->dev, "I2CCLK"); + i2c->clk = clk_get(&dev->dev, NULL); if (IS_ERR(i2c->clk)) { ret = PTR_ERR(i2c->clk); goto eclk; diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index c772e02c280..c39079f9c73 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -40,8 +40,8 @@ #include <asm/io.h> #include <mach/regs-gpio.h> -#include <asm/plat-s3c/regs-iic.h> -#include <asm/plat-s3c/iic.h> +#include <plat/regs-iic.h> +#include <plat/iic.h> /* i2c controller state */ @@ -56,6 +56,7 @@ enum s3c24xx_i2c_state { struct s3c24xx_i2c { spinlock_t lock; wait_queue_head_t wait; + unsigned int suspended:1; struct i2c_msg *msg; unsigned int msg_num; @@ -507,7 +508,7 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int unsigned long timeout; int ret; - if (!readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN) + if (i2c->suspended) return -EIO; ret = s3c24xx_i2c_set_master(i2c); @@ -986,17 +987,26 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev) } #ifdef CONFIG_PM +static int s3c24xx_i2c_suspend_late(struct platform_device *dev, + pm_message_t msg) +{ + struct s3c24xx_i2c *i2c = platform_get_drvdata(dev); + i2c->suspended = 1; + return 0; +} + static int s3c24xx_i2c_resume(struct platform_device *dev) { struct s3c24xx_i2c *i2c = platform_get_drvdata(dev); - if (i2c != NULL) - s3c24xx_i2c_init(i2c); + i2c->suspended = 0; + s3c24xx_i2c_init(i2c); return 0; } #else +#define s3c24xx_i2c_suspend_late NULL #define s3c24xx_i2c_resume NULL #endif @@ -1005,6 +1015,7 @@ static int s3c24xx_i2c_resume(struct platform_device *dev) static struct platform_driver s3c2410_i2c_driver = { .probe = s3c24xx_i2c_probe, .remove = s3c24xx_i2c_remove, + .suspend_late = s3c24xx_i2c_suspend_late, .resume = s3c24xx_i2c_resume, .driver = { .owner = THIS_MODULE, @@ -1015,6 +1026,7 @@ static struct platform_driver s3c2410_i2c_driver = { static struct platform_driver s3c2440_i2c_driver = { .probe = s3c24xx_i2c_probe, .remove = s3c24xx_i2c_remove, + .suspend_late = s3c24xx_i2c_suspend_late, .resume = s3c24xx_i2c_resume, .driver = { .owner = THIS_MODULE, diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index 640cbb23732..6c3d60b939b 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -160,9 +160,39 @@ struct sh_mobile_i2c_data { static void activate_ch(struct sh_mobile_i2c_data *pd) { + unsigned long i2c_clk; + u_int32_t num; + u_int32_t denom; + u_int32_t tmp; + /* Make sure the clock is enabled */ clk_enable(pd->clk); + /* Get clock rate after clock is enabled */ + i2c_clk = clk_get_rate(pd->clk); + + /* Calculate the value for iccl. From the data sheet: + * iccl = (p clock / transfer rate) * (L / (L + H)) + * where L and H are the SCL low/high ratio (5/4 in this case). + * We also round off the result. + */ + num = i2c_clk * 5; + denom = NORMAL_SPEED * 9; + tmp = num * 10 / denom; + if (tmp % 10 >= 5) + pd->iccl = (u_int8_t)((num/denom) + 1); + else + pd->iccl = (u_int8_t)(num/denom); + + /* Calculate the value for icch. From the data sheet: + icch = (p clock / transfer rate) * (H / (L + H)) */ + num = i2c_clk * 4; + tmp = num * 10 / denom; + if (tmp % 10 >= 5) + pd->icch = (u_int8_t)((num/denom) + 1); + else + pd->icch = (u_int8_t)(num/denom); + /* Enable channel and configure rx ack */ iowrite8(ioread8(ICCR(pd)) | ICCR_ICE, ICCR(pd)); @@ -318,7 +348,8 @@ static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd) } else data = i2c_op(pd, OP_RX, 0); - pd->msg->buf[real_pos] = data; + if (real_pos >= 0) + pd->msg->buf[real_pos] = data; } while (0); pd->pos++; @@ -458,40 +489,6 @@ static struct i2c_algorithm sh_mobile_i2c_algorithm = { .master_xfer = sh_mobile_i2c_xfer, }; -static void sh_mobile_i2c_setup_channel(struct platform_device *dev) -{ - struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev); - unsigned long peripheral_clk = clk_get_rate(pd->clk); - u_int32_t num; - u_int32_t denom; - u_int32_t tmp; - - spin_lock_init(&pd->lock); - init_waitqueue_head(&pd->wait); - - /* Calculate the value for iccl. From the data sheet: - * iccl = (p clock / transfer rate) * (L / (L + H)) - * where L and H are the SCL low/high ratio (5/4 in this case). - * We also round off the result. - */ - num = peripheral_clk * 5; - denom = NORMAL_SPEED * 9; - tmp = num * 10 / denom; - if (tmp % 10 >= 5) - pd->iccl = (u_int8_t)((num/denom) + 1); - else - pd->iccl = (u_int8_t)(num/denom); - - /* Calculate the value for icch. From the data sheet: - icch = (p clock / transfer rate) * (H / (L + H)) */ - num = peripheral_clk * 4; - tmp = num * 10 / denom; - if (tmp % 10 >= 5) - pd->icch = (u_int8_t)((num/denom) + 1); - else - pd->icch = (u_int8_t)(num/denom); -} - static int sh_mobile_i2c_hook_irqs(struct platform_device *dev, int hook) { struct resource *res; @@ -532,6 +529,7 @@ static int sh_mobile_i2c_probe(struct platform_device *dev) struct sh_mobile_i2c_data *pd; struct i2c_adapter *adap; struct resource *res; + char clk_name[8]; int size; int ret; @@ -541,9 +539,10 @@ static int sh_mobile_i2c_probe(struct platform_device *dev) return -ENOMEM; } - pd->clk = clk_get(&dev->dev, "peripheral_clk"); + snprintf(clk_name, sizeof(clk_name), "i2c%d", dev->id); + pd->clk = clk_get(&dev->dev, clk_name); if (IS_ERR(pd->clk)) { - dev_err(&dev->dev, "cannot get peripheral clock\n"); + dev_err(&dev->dev, "cannot get clock \"%s\"\n", clk_name); ret = PTR_ERR(pd->clk); goto err; } @@ -585,7 +584,8 @@ static int sh_mobile_i2c_probe(struct platform_device *dev) strlcpy(adap->name, dev->name, sizeof(adap->name)); - sh_mobile_i2c_setup_channel(dev); + spin_lock_init(&pd->lock); + init_waitqueue_head(&pd->wait); ret = i2c_add_numbered_adapter(adap); if (ret < 0) { diff --git a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c index c3022a02344..e4c98539c51 100644 --- a/drivers/i2c/busses/scx200_i2c.c +++ b/drivers/i2c/busses/scx200_i2c.c @@ -81,6 +81,7 @@ static struct i2c_algo_bit_data scx200_i2c_data = { static struct i2c_adapter scx200_i2c_ops = { .owner = THIS_MODULE, + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .id = I2C_HW_B_SCX200, .algo_data = &scx200_i2c_data, .name = "NatSemi SCx200 I2C", diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index 17356827b93..4c35702830c 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -1,6 +1,8 @@ # # Miscellaneous I2C chip drivers configuration # +# *** DEPRECATED! Do not add new entries! See Makefile *** +# menu "Miscellaneous I2C Chip support" diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index ca520fa143d..23d2a31b0a6 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -1,7 +1,8 @@ # # Makefile for miscellaneous I2C chip drivers. # -# Think twice before you add a new driver to this directory. +# Do not add new drivers to this directory! It is DEPRECATED. +# # Device drivers are better grouped according to the functionality they # implement rather than to the bus they are connected to. In particular: # * Hardware monitoring chip drivers go to drivers/hwmon diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c index 28902ebd553..e0d56ef2bcb 100644 --- a/drivers/i2c/chips/isp1301_omap.c +++ b/drivers/i2c/chips/isp1301_omap.c @@ -25,6 +25,7 @@ #include <linux/slab.h> #include <linux/interrupt.h> #include <linux/platform_device.h> +#include <linux/gpio.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> #include <linux/usb.h> @@ -33,7 +34,10 @@ #include <linux/workqueue.h> #include <asm/irq.h> +#include <asm/mach-types.h> + #include <mach/usb.h> +#include <mach/mux.h> #ifndef DEBUG @@ -88,14 +92,9 @@ struct isp1301 { /*-------------------------------------------------------------------------*/ -#ifdef CONFIG_MACH_OMAP_H2 - /* board-specific PM hooks */ -#include <asm/gpio.h> -#include <mach/mux.h> -#include <asm/mach-types.h> - +#if defined(CONFIG_MACH_OMAP_H2) || defined(CONFIG_MACH_OMAP_H3) #if defined(CONFIG_TPS65010) || defined(CONFIG_TPS65010_MODULE) @@ -135,6 +134,33 @@ static inline void notresponding(struct isp1301 *isp) #endif +#if defined(CONFIG_MACH_OMAP_H4) + +static void enable_vbus_draw(struct isp1301 *isp, unsigned mA) +{ + /* H4 controls this by DIP switch S2.4; no soft control. + * ON means the charger is always enabled. Leave it OFF + * unless the OTG port is used only in B-peripheral mode. + */ +} + +static void enable_vbus_source(struct isp1301 *isp) +{ + /* this board won't supply more than 8mA vbus power. + * some boards can switch a 100ma "unit load" (or more). + */ +} + + +/* products will deliver OTG messages with LEDs, GUI, etc */ +static inline void notresponding(struct isp1301 *isp) +{ + printk(KERN_NOTICE "OTG device not responding.\n"); +} + + +#endif + /*-------------------------------------------------------------------------*/ static struct i2c_driver isp1301_driver; @@ -334,8 +360,7 @@ static int gadget_suspend(struct isp1301 *isp) * NOTE: guaranteeing certain response times might mean we shouldn't * share keventd's work queue; a realtime task might be safest. */ -void -isp1301_defer_work(struct isp1301 *isp, int work) +static void isp1301_defer_work(struct isp1301 *isp, int work) { int status; @@ -512,7 +537,6 @@ static void update_otg1(struct isp1301 *isp, u8 int_src) otg_ctrl &= ~OTG_XCEIV_INPUTS; otg_ctrl &= ~(OTG_ID|OTG_ASESSVLD|OTG_VBUSVLD); - if (int_src & INTR_SESS_VLD) otg_ctrl |= OTG_ASESSVLD; else if (isp->otg.state == OTG_STATE_A_WAIT_VFALL) { @@ -886,11 +910,11 @@ static int otg_probe(struct platform_device *dev) static int otg_remove(struct platform_device *dev) { - otg_dev = 0; + otg_dev = NULL; return 0; } -struct platform_driver omap_otg_driver = { +static struct platform_driver omap_otg_driver = { .probe = otg_probe, .remove = otg_remove, .driver = { @@ -1212,6 +1236,8 @@ static void isp1301_release(struct device *dev) isp = dev_get_drvdata(dev); + /* FIXME -- not with a "new style" driver, it doesn't!! */ + /* ugly -- i2c hijacks our memory hook to wait_for_completion() */ if (isp->i2c_release) isp->i2c_release(dev); @@ -1233,7 +1259,7 @@ static int __exit isp1301_remove(struct i2c_client *i2c) otg_unbind(isp); #endif if (machine_is_omap_h2()) - omap_free_gpio(2); + gpio_free(2); isp->timer.data = 0; set_bit(WORK_STOP, &isp->todo); @@ -1241,7 +1267,7 @@ static int __exit isp1301_remove(struct i2c_client *i2c) flush_scheduled_work(); put_device(&i2c->dev); - the_transceiver = 0; + the_transceiver = NULL; return 0; } @@ -1295,7 +1321,7 @@ isp1301_set_host(struct otg_transceiver *otg, struct usb_bus *host) if (!host) { omap_writew(0, OTG_IRQ_EN); power_down(isp); - isp->otg.host = 0; + isp->otg.host = NULL; return 0; } @@ -1344,7 +1370,9 @@ static int isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget) { struct isp1301 *isp = container_of(otg, struct isp1301, otg); +#ifndef CONFIG_USB_OTG u32 l; +#endif if (!otg || isp != the_transceiver) return -ENODEV; @@ -1354,7 +1382,7 @@ isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget) if (!isp->otg.default_a) enable_vbus_draw(isp, 0); usb_gadget_vbus_disconnect(isp->otg.gadget); - isp->otg.gadget = 0; + isp->otg.gadget = NULL; power_down(isp); return 0; } @@ -1379,7 +1407,7 @@ isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget) power_up(isp); isp->otg.state = OTG_STATE_B_IDLE; - if (machine_is_omap_h2()) + if (machine_is_omap_h2() || machine_is_omap_h3()) isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0); isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING, @@ -1499,7 +1527,8 @@ isp1301_start_hnp(struct otg_transceiver *dev) /*-------------------------------------------------------------------------*/ -static int __init isp1301_probe(struct i2c_client *i2c) +static int __init +isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { int status; struct isp1301 *isp; @@ -1647,7 +1676,7 @@ module_init(isp_init); static void __exit isp_exit(void) { if (the_transceiver) - otg_set_transceiver(0); + otg_set_transceiver(NULL); i2c_del_driver(&isp1301_driver); } module_exit(isp_exit); diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 42e852d79ff..c6a63f46bc1 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -266,6 +266,9 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info) client->dev.platform_data = info->platform_data; + if (info->archdata) + client->dev.archdata = *info->archdata; + client->flags = info->flags; client->addr = info->addr; client->irq = info->irq; @@ -628,7 +631,7 @@ int i2c_del_adapter(struct i2c_adapter *adap) /* detach any active clients. This must be done first, because * it can fail; in which case we give up. */ - list_for_each_entry_safe(client, _n, &adap->clients, list) { + list_for_each_entry_safe_reverse(client, _n, &adap->clients, list) { struct i2c_driver *driver; driver = client->driver; |