diff options
Diffstat (limited to 'drivers/ide/jmicron.c')
| -rw-r--r-- | drivers/ide/jmicron.c | 176 |
1 files changed, 176 insertions, 0 deletions
diff --git a/drivers/ide/jmicron.c b/drivers/ide/jmicron.c new file mode 100644 index 00000000000..9a68433cf46 --- /dev/null +++ b/drivers/ide/jmicron.c @@ -0,0 +1,176 @@ + +/* + * Copyright (C) 2006 Red Hat <alan@redhat.com> + * + * May be copied or modified under the terms of the GNU General Public License + */ + +#include <linux/types.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/ide.h> +#include <linux/init.h> + +#define DRV_NAME "jmicron" + +typedef enum { + PORT_PATA0 = 0, + PORT_PATA1 = 1, + PORT_SATA = 2, +} port_type; + +/** + * jmicron_cable_detect - cable detection + * @hwif: IDE port + * + * Returns the cable type. + */ + +static u8 jmicron_cable_detect(ide_hwif_t *hwif) +{ + struct pci_dev *pdev = to_pci_dev(hwif->dev); + + u32 control; + u32 control5; + + int port = hwif->channel; + port_type port_map[2]; + + pci_read_config_dword(pdev, 0x40, &control); + + /* There are two basic mappings. One has the two SATA ports merged + as master/slave and the secondary as PATA, the other has only the + SATA port mapped */ + if (control & (1 << 23)) { + port_map[0] = PORT_SATA; + port_map[1] = PORT_PATA0; + } else { + port_map[0] = PORT_SATA; + port_map[1] = PORT_SATA; + } + + /* The 365/366 may have this bit set to map the second PATA port + as the internal primary channel */ + pci_read_config_dword(pdev, 0x80, &control5); + if (control5 & (1<<24)) + port_map[0] = PORT_PATA1; + + /* The two ports may then be logically swapped by the firmware */ + if (control & (1 << 22)) + port = port ^ 1; + + /* + * Now we know which physical port we are talking about we can + * actually do our cable checking etc. Thankfully we don't need + * to do the plumbing for other cases. + */ + switch (port_map[port]) { + case PORT_PATA0: + if (control & (1 << 3)) /* 40/80 pin primary */ + return ATA_CBL_PATA40; + return ATA_CBL_PATA80; + case PORT_PATA1: + if (control5 & (1 << 19)) /* 40/80 pin secondary */ + return ATA_CBL_PATA40; + return ATA_CBL_PATA80; + case PORT_SATA: + break; + } + /* Avoid bogus "control reaches end of non-void function" */ + return ATA_CBL_PATA80; +} + +static void jmicron_set_pio_mode(ide_drive_t *drive, const u8 pio) +{ +} + +/** + * jmicron_set_dma_mode - set host controller for DMA mode + * @drive: drive + * @mode: DMA mode + * + * As the JMicron snoops for timings we don't need to do anything here. + */ + +static void jmicron_set_dma_mode(ide_drive_t *drive, const u8 mode) +{ +} + +static const struct ide_port_ops jmicron_port_ops = { + .set_pio_mode = jmicron_set_pio_mode, + .set_dma_mode = jmicron_set_dma_mode, + .cable_detect = jmicron_cable_detect, +}; + +static const struct ide_port_info jmicron_chipset __devinitdata = { + .name = DRV_NAME, + .enablebits = { { 0x40, 0x01, 0x01 }, { 0x40, 0x10, 0x10 } }, + .port_ops = &jmicron_port_ops, + .pio_mask = ATA_PIO5, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, +}; + +/** + * jmicron_init_one - pci layer discovery entry + * @dev: PCI device + * @id: ident table entry + * + * Called by the PCI code when it finds a Jmicron controller. + * We then use the IDE PCI generic helper to do most of the work. + */ + +static int __devinit jmicron_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + return ide_pci_init_one(dev, &jmicron_chipset, NULL); +} + +/* All JMB PATA controllers have and will continue to have the same + * interface. Matching vendor and device class is enough for all + * current and future controllers if the controller is programmed + * properly. + * + * If libata is configured, jmicron PCI quirk programs the controller + * into the correct mode. If libata isn't configured, match known + * device IDs too to maintain backward compatibility. + */ +static struct pci_device_id jmicron_pci_tbl[] = { +#if !defined(CONFIG_ATA) && !defined(CONFIG_ATA_MODULE) + { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB361) }, + { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB363) }, + { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB365) }, + { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB366) }, + { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB368) }, +#endif + { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 0 }, + { 0, }, +}; + +MODULE_DEVICE_TABLE(pci, jmicron_pci_tbl); + +static struct pci_driver jmicron_pci_driver = { + .name = "JMicron IDE", + .id_table = jmicron_pci_tbl, + .probe = jmicron_init_one, + .remove = ide_pci_remove, + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, +}; + +static int __init jmicron_ide_init(void) +{ + return ide_pci_register_driver(&jmicron_pci_driver); +} + +static void __exit jmicron_ide_exit(void) +{ + pci_unregister_driver(&jmicron_pci_driver); +} + +module_init(jmicron_ide_init); +module_exit(jmicron_ide_exit); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("PCI driver module for the JMicron in legacy modes"); +MODULE_LICENSE("GPL"); |