aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide/pci/it821x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/pci/it821x.c')
-rw-r--r--drivers/ide/pci/it821x.c52
1 files changed, 34 insertions, 18 deletions
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index d8a167451fd..6ab04115286 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -418,7 +418,7 @@ static void it821x_set_dma_mode(ide_drive_t *drive, const u8 speed)
}
/**
- * ata66_it821x - check for 80 pin cable
+ * it821x_cable_detect - cable detection
* @hwif: interface to check
*
* Check for the presence of an ATA66 capable cable on the
@@ -426,7 +426,7 @@ static void it821x_set_dma_mode(ide_drive_t *drive, const u8 speed)
* the needed logic onboard.
*/
-static u8 __devinit ata66_it821x(ide_hwif_t *hwif)
+static u8 __devinit it821x_cable_detect(ide_hwif_t *hwif)
{
/* The reference driver also only does disk side */
return ATA_CBL_PATA80;
@@ -511,6 +511,11 @@ static void __devinit it821x_quirkproc(ide_drive_t *drive)
}
+static struct ide_dma_ops it821x_pass_through_dma_ops = {
+ .dma_start = it821x_dma_start,
+ .dma_end = it821x_dma_end,
+};
+
/**
* init_hwif_it821x - set up hwif structs
* @hwif: interface to set up
@@ -523,16 +528,10 @@ static void __devinit it821x_quirkproc(ide_drive_t *drive)
static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct it821x_dev *idev = kzalloc(sizeof(struct it821x_dev), GFP_KERNEL);
+ struct it821x_dev **itdevs = (struct it821x_dev **)pci_get_drvdata(dev);
+ struct it821x_dev *idev = itdevs[hwif->channel];
u8 conf;
- hwif->quirkproc = &it821x_quirkproc;
-
- if (idev == NULL) {
- printk(KERN_ERR "it821x: out of memory, falling back to legacy behaviour.\n");
- return;
- }
-
ide_set_hwifdata(hwif, idev);
pci_read_config_byte(dev, 0x50, &conf);
@@ -567,17 +566,11 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
}
if (idev->smart == 0) {
- hwif->set_pio_mode = &it821x_set_pio_mode;
- hwif->set_dma_mode = &it821x_set_dma_mode;
-
/* MWDMA/PIO clock switching for pass through mode */
- hwif->dma_start = &it821x_dma_start;
- hwif->ide_dma_end = &it821x_dma_end;
+ hwif->dma_ops = &it821x_pass_through_dma_ops;
} else
hwif->host_flags |= IDE_HFLAG_NO_SET_MODE;
- hwif->cable_detect = ata66_it821x;
-
if (hwif->dma_base == 0)
return;
@@ -617,13 +610,20 @@ static unsigned int __devinit init_chipset_it821x(struct pci_dev *dev, const cha
return 0;
}
+static const struct ide_port_ops it821x_port_ops = {
+ /* it821x_set_{pio,dma}_mode() are only used in pass-through mode */
+ .set_pio_mode = it821x_set_pio_mode,
+ .set_dma_mode = it821x_set_dma_mode,
+ .quirkproc = it821x_quirkproc,
+ .cable_detect = it821x_cable_detect,
+};
#define DECLARE_ITE_DEV(name_str) \
{ \
.name = name_str, \
.init_chipset = init_chipset_it821x, \
.init_hwif = init_hwif_it821x, \
- .host_flags = IDE_HFLAG_BOOTABLE, \
+ .port_ops = &it821x_port_ops, \
.pio_mask = ATA_PIO4, \
}
@@ -642,6 +642,22 @@ static const struct ide_port_info it821x_chipsets[] __devinitdata = {
static int __devinit it821x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
+ struct it821x_dev *itdevs[2] = { NULL, NULL} , *itdev;
+ unsigned int i;
+
+ for (i = 0; i < 2; i++) {
+ itdev = kzalloc(sizeof(*itdev), GFP_KERNEL);
+ if (itdev == NULL) {
+ kfree(itdevs[0]);
+ printk(KERN_ERR "it821x: out of memory\n");
+ return -ENOMEM;
+ }
+
+ itdevs[i] = itdev;
+ }
+
+ pci_set_drvdata(dev, itdevs);
+
return ide_setup_pci_device(dev, &it821x_chipsets[id->driver_data]);
}