aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide/pci/siimage.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/pci/siimage.c')
-rw-r--r--drivers/ide/pci/siimage.c232
1 files changed, 113 insertions, 119 deletions
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 590ce7b0f9f..4cf8fc54aa2 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -1,7 +1,7 @@
/*
* Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2003 Red Hat <alan@redhat.com>
- * Copyright (C) 2007 MontaVista Software, Inc.
+ * Copyright (C) 2007-2008 MontaVista Software, Inc.
* Copyright (C) 2007-2008 Bartlomiej Zolnierkiewicz
*
* May be copied or modified under the terms of the GNU General Public License
@@ -17,10 +17,10 @@
*
* FAQ Items:
* If you are using Marvell SATA-IDE adapters with Maxtor drives
- * ensure the system is set up for ATA100/UDMA5 not UDMA6.
+ * ensure the system is set up for ATA100/UDMA5, not UDMA6.
*
* If you are using WD drives with SATA bridges you must set the
- * drive to "Single". "Master" will hang
+ * drive to "Single". "Master" will hang.
*
* If you have strange problems with nVidia chipset systems please
* see the SI support documentation and update your system BIOS
@@ -42,25 +42,24 @@
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/init.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
/**
* pdev_is_sata - check if device is SATA
* @pdev: PCI device to check
- *
+ *
* Returns true if this is a SATA controller
*/
-
+
static int pdev_is_sata(struct pci_dev *pdev)
{
#ifdef CONFIG_BLK_DEV_IDE_SATA
- switch(pdev->device) {
- case PCI_DEVICE_ID_SII_3112:
- case PCI_DEVICE_ID_SII_1210SA:
- return 1;
- case PCI_DEVICE_ID_SII_680:
- return 0;
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_SII_3112:
+ case PCI_DEVICE_ID_SII_1210SA:
+ return 1;
+ case PCI_DEVICE_ID_SII_680:
+ return 0;
}
BUG();
#endif
@@ -70,10 +69,10 @@ static int pdev_is_sata(struct pci_dev *pdev)
/**
* is_sata - check if hwif is SATA
* @hwif: interface to check
- *
+ *
* Returns true if this is a SATA controller
*/
-
+
static inline int is_sata(ide_hwif_t *hwif)
{
return pdev_is_sata(to_pci_dev(hwif->dev));
@@ -86,21 +85,22 @@ static inline int is_sata(ide_hwif_t *hwif)
*
* Turn a config register offset into the right address in either
* PCI space or MMIO space to access the control register in question
- * Thankfully this is a configuration operation so isnt performance
- * criticial.
+ * Thankfully this is a configuration operation, so isn't performance
+ * critical.
*/
-
+
static unsigned long siimage_selreg(ide_hwif_t *hwif, int r)
{
unsigned long base = (unsigned long)hwif->hwif_data;
+
base += 0xA0 + r;
- if(hwif->mmio)
- base += (hwif->channel << 6);
+ if (hwif->mmio)
+ base += hwif->channel << 6;
else
- base += (hwif->channel << 4);
+ base += hwif->channel << 4;
return base;
}
-
+
/**
* siimage_seldev - return register base
* @hwif: interface
@@ -110,16 +110,17 @@ static unsigned long siimage_selreg(ide_hwif_t *hwif, int r)
* PCI space or MMIO space to access the control register in question
* including accounting for the unit shift.
*/
-
+
static inline unsigned long siimage_seldev(ide_drive_t *drive, int r)
{
ide_hwif_t *hwif = HWIF(drive);
- unsigned long base = (unsigned long)hwif->hwif_data;
+ unsigned long base = (unsigned long)hwif->hwif_data;
+
base += 0xA0 + r;
- if(hwif->mmio)
- base += (hwif->channel << 6);
+ if (hwif->mmio)
+ base += hwif->channel << 6;
else
- base += (hwif->channel << 4);
+ base += hwif->channel << 4;
base |= drive->select.b.unit << drive->select.b.unit;
return base;
}
@@ -184,21 +185,26 @@ static void sil_iowrite32(struct pci_dev *dev, u32 val, unsigned long addr)
static u8 sil_pata_udma_filter(ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long base = (unsigned long) hwif->hwif_data;
- u8 mask = 0, scsc;
+ ide_hwif_t *hwif = drive->hwif;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ unsigned long base = (unsigned long)hwif->hwif_data;
+ u8 scsc, mask = 0;
scsc = sil_ioread8(dev, base + (hwif->mmio ? 0x4A : 0x8A));
- if ((scsc & 0x30) == 0x10) /* 133 */
+ switch (scsc & 0x30) {
+ case 0x10: /* 133 */
mask = ATA_UDMA6;
- else if ((scsc & 0x30) == 0x20) /* 2xPCI */
+ break;
+ case 0x20: /* 2xPCI */
mask = ATA_UDMA6;
- else if ((scsc & 0x30) == 0x00) /* 100 */
+ break;
+ case 0x00: /* 100 */
mask = ATA_UDMA5;
- else /* Disabled ? */
+ break;
+ default: /* Disabled ? */
BUG();
+ }
return mask;
}
@@ -220,8 +226,8 @@ static u8 sil_sata_udma_filter(ide_drive_t *drive)
static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
{
- const u16 tf_speed[] = { 0x328a, 0x2283, 0x1281, 0x10c3, 0x10c1 };
- const u16 data_speed[] = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 };
+ static const u16 tf_speed[] = { 0x328a, 0x2283, 0x1281, 0x10c3, 0x10c1 };
+ static const u16 data_speed[] = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 };
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
@@ -229,7 +235,7 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
u32 speedt = 0;
u16 speedp = 0;
unsigned long addr = siimage_seldev(drive, 0x04);
- unsigned long tfaddr = siimage_selreg(hwif, 0x02);
+ unsigned long tfaddr = siimage_selreg(hwif, 0x02);
unsigned long base = (unsigned long)hwif->hwif_data;
u8 tf_pio = pio;
u8 addr_mask = hwif->channel ? (hwif->mmio ? 0xF4 : 0x84)
@@ -261,7 +267,7 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
mode = sil_ioread8(dev, base + addr_mask);
mode &= ~(unit ? 0x30 : 0x03);
- mode |= (unit ? 0x10 : 0x01);
+ mode |= unit ? 0x10 : 0x01;
sil_iowrite8(dev, mode, base + addr_mask);
}
@@ -275,44 +281,43 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
- u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 };
- u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 };
- u16 dma[] = { 0x2208, 0x10C2, 0x10C1 };
+ static const u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 };
+ static const u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 };
+ static const u16 dma[] = { 0x2208, 0x10C2, 0x10C1 };
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
u16 ultra = 0, multi = 0;
u8 mode = 0, unit = drive->select.b.unit;
unsigned long base = (unsigned long)hwif->hwif_data;
- u8 scsc = 0, addr_mask = ((hwif->channel) ?
- ((hwif->mmio) ? 0xF4 : 0x84) :
- ((hwif->mmio) ? 0xB4 : 0x80));
-
+ u8 scsc = 0, addr_mask = hwif->channel ?
+ (hwif->mmio ? 0xF4 : 0x84) :
+ (hwif->mmio ? 0xB4 : 0x80);
unsigned long ma = siimage_seldev(drive, 0x08);
unsigned long ua = siimage_seldev(drive, 0x0C);
- scsc = sil_ioread8(dev, base + (hwif->mmio ? 0x4A : 0x8A));
- mode = sil_ioread8(dev, base + addr_mask);
+ scsc = sil_ioread8 (dev, base + (hwif->mmio ? 0x4A : 0x8A));
+ mode = sil_ioread8 (dev, base + addr_mask);
multi = sil_ioread16(dev, ma);
ultra = sil_ioread16(dev, ua);
- mode &= ~((unit) ? 0x30 : 0x03);
+ mode &= ~(unit ? 0x30 : 0x03);
ultra &= ~0x3F;
scsc = ((scsc & 0x30) == 0x00) ? 0 : 1;
scsc = is_sata(hwif) ? 1 : scsc;
if (speed >= XFER_UDMA_0) {
- multi = dma[2];
- ultra |= (scsc ? ultra6[speed - XFER_UDMA_0] :
- ultra5[speed - XFER_UDMA_0]);
- mode |= (unit ? 0x30 : 0x03);
+ multi = dma[2];
+ ultra |= scsc ? ultra6[speed - XFER_UDMA_0] :
+ ultra5[speed - XFER_UDMA_0];
+ mode |= unit ? 0x30 : 0x03;
} else {
multi = dma[speed - XFER_MW_DMA_0];
- mode |= (unit ? 0x20 : 0x02);
+ mode |= unit ? 0x20 : 0x02;
}
- sil_iowrite8(dev, mode, base + addr_mask);
+ sil_iowrite8 (dev, mode, base + addr_mask);
sil_iowrite16(dev, multi, ma);
sil_iowrite16(dev, ultra, ua);
}
@@ -326,13 +331,14 @@ static int siimage_io_dma_test_irq(ide_drive_t *drive)
unsigned long addr = siimage_selreg(hwif, 1);
/* return 1 if INTR asserted */
- if ((hwif->INB(hwif->dma_status) & 4) == 4)
+ if (hwif->INB(hwif->dma_status) & 4)
return 1;
/* return 1 if Device INTR asserted */
pci_read_config_byte(dev, addr, &dma_altstat);
if (dma_altstat & 8)
- return 0; //return 1;
+ return 0; /* return 1; */
+
return 0;
}
@@ -352,9 +358,9 @@ static int siimage_mmio_dma_test_irq(ide_drive_t *drive)
= (void __iomem *)hwif->sata_scr[SATA_ERROR_OFFSET];
if (sata_error_addr) {
- unsigned long base = (unsigned long)hwif->hwif_data;
- u32 ext_stat = readl((void __iomem *)(base + 0x10));
- u8 watchdog = 0;
+ unsigned long base = (unsigned long)hwif->hwif_data;
+ u32 ext_stat = readl((void __iomem *)(base + 0x10));
+ u8 watchdog = 0;
if (ext_stat & ((hwif->channel) ? 0x40 : 0x10)) {
u32 sata_error = readl(sata_error_addr);
@@ -363,25 +369,22 @@ static int siimage_mmio_dma_test_irq(ide_drive_t *drive)
watchdog = (sata_error & 0x00680000) ? 1 : 0;
printk(KERN_WARNING "%s: sata_error = 0x%08x, "
"watchdog = %d, %s\n",
- drive->name, sata_error, watchdog,
- __func__);
-
- } else {
+ drive->name, sata_error, watchdog, __func__);
+ } else
watchdog = (ext_stat & 0x8000) ? 1 : 0;
- }
- ext_stat >>= 16;
+ ext_stat >>= 16;
if (!(ext_stat & 0x0404) && !watchdog)
return 0;
}
/* return 1 if INTR asserted */
- if ((readb((void __iomem *)hwif->dma_status) & 0x04) == 0x04)
+ if (readb((void __iomem *)hwif->dma_status) & 0x04)
return 1;
/* return 1 if Device INTR asserted */
- if ((readb((void __iomem *)addr) & 8) == 8)
- return 0; //return 1;
+ if (readb((void __iomem *)addr) & 8)
+ return 0; /* return 1; */
return 0;
}
@@ -440,33 +443,32 @@ static void sil_sata_pre_reset(ide_drive_t *drive)
}
/**
- * setup_mmio_siimage - switch an SI controller into MMIO
+ * setup_mmio_siimage - switch controller into MMIO mode
* @dev: PCI device we are configuring
* @name: device name
*
- * Attempt to put the device into mmio mode. There are some slight
- * complications here with certain systems where the mmio bar isnt
- * mapped so we have to be sure we can fall back to I/O.
+ * Attempt to put the device into MMIO mode. There are some slight
+ * complications here with certain systems where the MMIO BAR isn't
+ * mapped, so we have to be sure that we can fall back to I/O.
*/
-
-static unsigned int setup_mmio_siimage (struct pci_dev *dev, const char *name)
+
+static unsigned int setup_mmio_siimage(struct pci_dev *dev, const char *name)
{
resource_size_t bar5 = pci_resource_start(dev, 5);
unsigned long barsize = pci_resource_len(dev, 5);
void __iomem *ioaddr;
/*
- * Drop back to PIO if we can't map the mmio. Some
- * systems seem to get terminally confused in the PCI
- * spaces.
+ * Drop back to PIO if we can't map the MMIO. Some systems
+ * seem to get terminally confused in the PCI spaces.
*/
if (!request_mem_region(bar5, barsize, name)) {
- printk(KERN_WARNING "siimage: IDE controller MMIO ports not available.\n");
+ printk(KERN_WARNING "siimage: IDE controller MMIO ports not "
+ "available.\n");
return 0;
}
ioaddr = ioremap(bar5, barsize);
-
if (ioaddr == NULL) {
release_mem_region(bar5, barsize);
return 0;
@@ -484,23 +486,23 @@ static unsigned int setup_mmio_siimage (struct pci_dev *dev, const char *name)
* @name: device name
*
* Perform the initial PCI set up for this device. Attempt to switch
- * to 133MHz clocking if the system isn't already set up to do it.
+ * to 133 MHz clocking if the system isn't already set up to do it.
*/
-static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev,
+ const char *name)
{
unsigned long base, scsc_addr;
void __iomem *ioaddr = NULL;
- u8 rev = dev->revision, tmp = 0, BA5_EN = 0;
+ u8 rev = dev->revision, tmp, BA5_EN;
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, rev ? 1 : 255);
pci_read_config_byte(dev, 0x8A, &BA5_EN);
- if ((BA5_EN & 0x01) || pci_resource_start(dev, 5)) {
+ if ((BA5_EN & 0x01) || pci_resource_start(dev, 5))
if (setup_mmio_siimage(dev, name))
ioaddr = pci_get_drvdata(dev);
- }
base = (unsigned long)ioaddr;
@@ -527,7 +529,7 @@ static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev, const ch
switch (tmp & 0x30) {
case 0x00:
- /* On 100MHz clocking, try and switch to 133MHz */
+ /* On 100 MHz clocking, try and switch to 133 MHz */
sil_iowrite8(dev, tmp | 0x10, scsc_addr);
break;
case 0x30:
@@ -543,12 +545,12 @@ static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev, const ch
tmp = sil_ioread8(dev, scsc_addr);
- sil_iowrite8(dev, 0x72, base + 0xA1);
+ sil_iowrite8 (dev, 0x72, base + 0xA1);
sil_iowrite16(dev, 0x328A, base + 0xA2);
sil_iowrite32(dev, 0x62DD62DD, base + 0xA4);
sil_iowrite32(dev, 0x43924392, base + 0xA8);
sil_iowrite32(dev, 0x40094009, base + 0xAC);
- sil_iowrite8(dev, 0x72, base ? (base + 0xE1) : 0xB1);
+ sil_iowrite8 (dev, 0x72, base ? (base + 0xE1) : 0xB1);
sil_iowrite16(dev, 0x328A, base ? (base + 0xE2) : 0xB2);
sil_iowrite32(dev, 0x62DD62DD, base ? (base + 0xE4) : 0xB4);
sil_iowrite32(dev, 0x43924392, base ? (base + 0xE8) : 0xB8);
@@ -579,8 +581,7 @@ static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev, const ch
*
* The basic setup here is fairly simple, we can use standard MMIO
* operations. However we do have to set the taskfile register offsets
- * by hand as there isnt a standard defined layout for them this
- * time.
+ * by hand as there isn't a standard defined layout for them this time.
*
* The hardware supports buffered taskfiles and also some rather nice
* extended PRD tables. For better SI3112 support use the libata driver
@@ -591,24 +592,20 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)
struct pci_dev *dev = to_pci_dev(hwif->dev);
void *addr = pci_get_drvdata(dev);
u8 ch = hwif->channel;
- unsigned long base;
-
struct ide_io_ports *io_ports = &hwif->io_ports;
+ unsigned long base;
/*
- * Fill in the basic HWIF bits
+ * Fill in the basic hwif bits
*/
-
hwif->host_flags |= IDE_HFLAG_MMIO;
default_hwif_mmiops(hwif);
- hwif->hwif_data = addr;
+ hwif->hwif_data = addr;
/*
- * Now set up the hw. We have to do this ourselves as
- * the MMIO layout isnt the same as the standard port
- * based I/O
+ * Now set up the hw. We have to do this ourselves as the
+ * MMIO layout isn't the same as the standard port based I/O.
*/
-
memset(io_ports, 0, sizeof(*io_ports));
base = (unsigned long)addr;
@@ -618,10 +615,9 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)
base += 0x80;
/*
- * The buffered task file doesn't have status/control
- * so we can't currently use it sanely since we want to
- * use LBA48 mode.
- */
+ * The buffered task file doesn't have status/control, so we
+ * can't currently use it sanely since we want to use LBA48 mode.
+ */
io_ports->data_addr = base;
io_ports->error_addr = base + 1;
io_ports->nsect_addr = base + 2;
@@ -650,19 +646,17 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)
static int is_dev_seagate_sata(ide_drive_t *drive)
{
- const char *s = &drive->id->model[0];
- unsigned len;
-
- len = strnlen(s, sizeof(drive->id->model));
+ const char *s = &drive->id->model[0];
+ unsigned len = strnlen(s, sizeof(drive->id->model));
- if ((len > 4) && (!memcmp(s, "ST", 2))) {
+ if ((len > 4) && (!memcmp(s, "ST", 2)))
if ((!memcmp(s + len - 2, "AS", 2)) ||
(!memcmp(s + len - 3, "ASL", 3))) {
printk(KERN_INFO "%s: applying pessimistic Seagate "
"errata fix\n", drive->name);
return 1;
}
- }
+
return 0;
}
@@ -679,7 +673,7 @@ static void __devinit sil_quirkproc(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
- /* Try and raise the rqsize */
+ /* Try and rise the rqsize */
if (!is_sata(hwif) || !is_dev_seagate_sata(drive))
hwif->rqsize = 128;
}
@@ -713,15 +707,14 @@ static void __devinit init_iops_siimage(ide_hwif_t *hwif)
* sil_cable_detect - cable detection
* @hwif: interface to check
*
- * Check for the presence of an ATA66 capable cable on the
- * interface.
+ * Check for the presence of an ATA66 capable cable on the interface.
*/
static u8 __devinit sil_cable_detect(ide_hwif_t *hwif)
{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long addr = siimage_selreg(hwif, 0);
- u8 ata66 = sil_ioread8(dev, addr);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ unsigned long addr = siimage_selreg(hwif, 0);
+ u8 ata66 = sil_ioread8(dev, addr);
return (ata66 & 0x01) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
}
@@ -767,15 +760,16 @@ static const struct ide_port_info siimage_chipsets[] __devinitdata = {
};
/**
- * siimage_init_one - pci layer discovery entry
+ * siimage_init_one - PCI layer discovery entry
* @dev: PCI device
* @id: ident table entry
*
- * Called by the PCI code when it finds an SI680 or SI3112 controller.
+ * Called by the PCI code when it finds an SiI680 or SiI3112 controller.
* We then use the IDE PCI generic helper to do most of the work.
*/
-
-static int __devinit siimage_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+
+static int __devinit siimage_init_one(struct pci_dev *dev,
+ const struct pci_device_id *id)
{
struct ide_port_info d;
u8 idx = id->driver_data;
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 08:58:21 +0000