diff options
Diffstat (limited to 'drivers/ide')
83 files changed, 4034 insertions, 4642 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index fc735ab08ff..6c6dd2faced 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -54,38 +54,6 @@ menuconfig IDE if IDE -config BLK_DEV_IDE - tristate "Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support" - ---help--- - If you say Y here, you will use the full-featured IDE driver to - control up to ten ATA/IDE interfaces, each being able to serve a - "master" and a "slave" device, for a total of up to twenty ATA/IDE - disk/cdrom/tape/floppy drives. - - Useful information about large (>540 MB) IDE disks, multiple - interfaces, what to do if ATA/IDE devices are not automatically - detected, sound card ATA/IDE ports, module support, and other - topics, is contained in <file:Documentation/ide/ide.txt>. For detailed - information about hard drives, consult the Disk-HOWTO and the - Multi-Disk-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To fine-tune ATA/IDE drive/interface parameters for improved - performance, look for the hdparm package at - <ftp://ibiblio.org/pub/Linux/system/hardware/>. - - To compile this driver as a module, choose M here and read - <file:Documentation/ide/ide.txt>. The module will be called ide-mod. - Do not compile this driver as a module if your root file system (the - one containing the directory /) is located on an IDE device. - - If you have one or more IDE drives, say Y or M here. If your system - has no IDE drives, or if memory requirements are really tight, you - could say N here, and select the "Old hard disk driver" below - instead to save about 13 KB of memory in the kernel. - -if BLK_DEV_IDE - comment "Please see Documentation/ide/ide.txt for help/info on IDE drives" config IDE_TIMINGS @@ -131,29 +99,6 @@ config BLK_DEV_IDEDISK If unsure, say Y. -config IDEDISK_MULTI_MODE - bool "Use multiple sector mode for Programmed Input/Output by default" - help - This setting is irrelevant for most IDE disks, with direct memory - access, to which multiple sector mode does not apply. Multiple sector - mode is a feature of most modern IDE hard drives, permitting the - transfer of multiple sectors per Programmed Input/Output interrupt, - rather than the usual one sector per interrupt. When this feature is - enabled, it can reduce operating system overhead for disk Programmed - Input/Output. On some systems, it also can increase the data - throughput of Programmed Input/Output. Some drives, however, seemed - to run slower with multiple sector mode enabled. Some drives claimed - to support multiple sector mode, but lost data at some settings. - Under rare circumstances, such failures could result in massive - filesystem corruption. - - If you get the following error, try to say Y here: - - hda: set_multmode: status=0x51 { DriveReady SeekComplete Error } - hda: set_multmode: error=0x04 { DriveStatusError } - - If in doubt, say N. - config BLK_DEV_IDECS tristate "PCMCIA IDE support" depends on PCMCIA @@ -292,6 +237,20 @@ config IDE_GENERIC tristate "generic/default IDE chipset support" depends on ALPHA || X86 || IA64 || M32R || MIPS help + This is the generic IDE driver. This driver attaches to the + fixed legacy ports (e.g. on PCs 0x1f0/0x170, 0x1e8/0x168 and + so on). Please note that if this driver is built into the + kernel or loaded before other ATA (IDE or libata) drivers + and the controller is located at legacy ports, this driver + may grab those ports and thus can prevent the controller + specific driver from attaching. + + Also, currently, IDE generic doesn't allow IRQ sharing + meaning that the IRQs it grabs won't be available to other + controllers sharing those IRQs which usually makes drivers + for those controllers fail. Generally, it's not a good idea + to load IDE generic driver on modern systems. + If unsure, say N. config BLK_DEV_PLATFORM @@ -357,7 +316,7 @@ config BLK_DEV_IDEPCI config IDEPCI_PCIBUS_ORDER bool "Probe IDE PCI devices in the PCI bus order (DEPRECATED)" - depends on BLK_DEV_IDE=y && BLK_DEV_IDEPCI + depends on IDE=y && BLK_DEV_IDEPCI default y help Probe IDE PCI devices in the order in which they appear on the @@ -738,7 +697,7 @@ endif config BLK_DEV_IDE_PMAC tristate "PowerMac on-board IDE support" - depends on PPC_PMAC && IDE=y && BLK_DEV_IDE=y + depends on PPC_PMAC && IDE=y select IDE_TIMINGS help This driver provides support for the on-board IDE controller on @@ -766,10 +725,6 @@ config BLK_DEV_IDEDMA_PMAC to transfer data to and from memory. Saying Y is safe and improves performance. -config BLK_DEV_IDE_SWARM - tristate "IDE for Sibyte evaluation boards" - depends on SIBYTE_SB1xxx_SOC - config BLK_DEV_IDE_AU1XXX bool "IDE for AMD Alchemy Au1200" depends on SOC_AU1200 @@ -976,6 +931,4 @@ config BLK_DEV_IDEDMA def_bool BLK_DEV_IDEDMA_SFF || BLK_DEV_IDEDMA_PMAC || \ BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA -endif - endif # IDE diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index 64e0ecdc4ed..ceaf779054e 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -4,25 +4,26 @@ EXTRA_CFLAGS += -Idrivers/ide -ide-core-y += ide.o ide-io.o ide-iops.o ide-lib.o ide-probe.o ide-taskfile.o \ - ide-pio-blacklist.o +ide-core-y += ide.o ide-ioctls.o ide-io.o ide-iops.o ide-lib.o ide-probe.o \ + ide-taskfile.o ide-park.o ide-pio-blacklist.o # core IDE code ide-core-$(CONFIG_IDE_TIMINGS) += ide-timings.o ide-core-$(CONFIG_IDE_ATAPI) += ide-atapi.o ide-core-$(CONFIG_BLK_DEV_IDEPCI) += setup-pci.o ide-core-$(CONFIG_BLK_DEV_IDEDMA) += ide-dma.o +ide-core-$(CONFIG_BLK_DEV_IDEDMA_SFF) += ide-dma-sff.o ide-core-$(CONFIG_IDE_PROC_FS) += ide-proc.o ide-core-$(CONFIG_BLK_DEV_IDEACPI) += ide-acpi.o -obj-$(CONFIG_BLK_DEV_IDE) += ide-core.o +obj-$(CONFIG_IDE) += ide-core.o ifeq ($(CONFIG_IDE_ARM), y) ide-arm-core-y += arm/ide_arm.o obj-y += ide-arm-core.o endif -obj-$(CONFIG_BLK_DEV_IDE) += legacy/ pci/ +obj-$(CONFIG_IDE) += legacy/ pci/ obj-$(CONFIG_IDEPCI_PCIBUS_ORDER) += ide-scan-pci.o @@ -31,17 +32,24 @@ ifeq ($(CONFIG_BLK_DEV_CMD640), y) obj-y += cmd640-core.o endif -obj-$(CONFIG_BLK_DEV_IDE) += ppc/ +obj-$(CONFIG_IDE) += ppc/ obj-$(CONFIG_IDE_H8300) += h8300/ obj-$(CONFIG_IDE_GENERIC) += ide-generic.o obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o +ide-disk_mod-y += ide-disk.o ide-disk_ioctl.o ide-cd_mod-y += ide-cd.o ide-cd_ioctl.o ide-cd_verbose.o +ide-floppy_mod-y += ide-floppy.o ide-floppy_ioctl.o -obj-$(CONFIG_BLK_DEV_IDEDISK) += ide-disk.o +ifeq ($(CONFIG_IDE_PROC_FS), y) + ide-disk_mod-y += ide-disk_proc.o + ide-floppy_mod-y += ide-floppy_proc.o +endif + +obj-$(CONFIG_BLK_DEV_IDEDISK) += ide-disk_mod.o obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd_mod.o +obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy_mod.o obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o -obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy.o ifeq ($(CONFIG_BLK_DEV_IDECS), y) ide-cs-core-y += legacy/ide-cs.o @@ -53,4 +61,4 @@ ifeq ($(CONFIG_BLK_DEV_PLATFORM), y) obj-y += ide-platform-core.o endif -obj-$(CONFIG_BLK_DEV_IDE) += arm/ mips/ +obj-$(CONFIG_IDE) += arm/ mips/ diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c index df4af408395..76bdc9a27f6 100644 --- a/drivers/ide/arm/icside.c +++ b/drivers/ide/arm/icside.c @@ -10,7 +10,6 @@ #include <linux/slab.h> #include <linux/blkdev.h> #include <linux/errno.h> -#include <linux/hdreg.h> #include <linux/ide.h> #include <linux/dma-mapping.h> #include <linux/device.h> @@ -265,8 +264,8 @@ static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode) * If we're going to be doing MW_DMA_1 or MW_DMA_2, we should * take care to note the values in the ID... */ - if (use_dma_info && drive->id->eide_dma_time > cycle_time) - cycle_time = drive->id->eide_dma_time; + if (use_dma_info && drive->id[ATA_ID_EIDE_DMA_TIME] > cycle_time) + cycle_time = drive->id[ATA_ID_EIDE_DMA_TIME]; drive->drive_data = cycle_time; @@ -373,25 +372,6 @@ static int icside_dma_test_irq(ide_drive_t *drive) ICS_ARCIN_V6_INTRSTAT_1)) & 1; } -static void icside_dma_timeout(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - - printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name); - - if (icside_dma_test_irq(drive)) - return; - - ide_dump_status(drive, "DMA timeout", hwif->tp_ops->read_status(hwif)); - - icside_dma_end(drive); -} - -static void icside_dma_lost_irq(ide_drive_t *drive) -{ - printk(KERN_ERR "%s: IRQ lost\n", drive->name); -} - static int icside_dma_init(ide_hwif_t *hwif, const struct ide_port_info *d) { hwif->dmatable_cpu = NULL; @@ -407,8 +387,8 @@ static const struct ide_dma_ops icside_v6_dma_ops = { .dma_start = icside_dma_start, .dma_end = icside_dma_end, .dma_test_irq = icside_dma_test_irq, - .dma_timeout = icside_dma_timeout, - .dma_lost_irq = icside_dma_lost_irq, + .dma_timeout = ide_dma_timeout, + .dma_lost_irq = ide_dma_lost_irq, }; #else #define icside_v6_dma_ops NULL diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c index 4fd91dcf1dc..122ed3c072f 100644 --- a/drivers/ide/arm/palm_bk3710.c +++ b/drivers/ide/arm/palm_bk3710.c @@ -27,7 +27,6 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/ioport.h> -#include <linux/hdreg.h> #include <linux/ide.h> #include <linux/delay.h> #include <linux/init.h> @@ -180,7 +179,7 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate, val32 |= (t2i << (dev ? 8 : 0)); writel(val32, base + BK3710_DATRCVR); - if (mate && mate->present) { + if (mate) { u8 mode2 = ide_get_best_pio_mode(mate, 255, 4); if (mode2 < mode) @@ -213,7 +212,8 @@ static void palm_bk3710_set_dma_mode(ide_drive_t *drive, u8 xferspeed) palm_bk3710_setudmamode(base, is_slave, xferspeed - XFER_UDMA_0); } else { - palm_bk3710_setdmamode(base, is_slave, drive->id->eide_dma_min, + palm_bk3710_setdmamode(base, is_slave, + drive->id[ATA_ID_EIDE_DMA_MIN], xferspeed); } } @@ -229,7 +229,7 @@ static void palm_bk3710_set_pio_mode(ide_drive_t *drive, u8 pio) * Obtain the drive PIO data for tuning the Palm Chip registers */ cycle_time = ide_pio_cycle_time(drive, pio); - mate = ide_get_paired_drive(drive); + mate = ide_get_pair_dev(drive); palm_bk3710_setpiomode(base, mate, is_slave, cycle_time, pio); } diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c index bde7a585f19..e2cdd2e9cde 100644 --- a/drivers/ide/h8300/ide-h8300.c +++ b/drivers/ide/h8300/ide-h8300.c @@ -80,7 +80,7 @@ static void h8300_tf_load(ide_drive_t *drive, ide_task_t *task) outb(tf->lbah, io_ports->lbah_addr); if (task->tf_flags & IDE_TFLAG_OUT_DEVICE) - outb((tf->device & HIHI) | drive->select.all, + outb((tf->device & HIHI) | drive->select, io_ports->device_addr); } diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index 6f704628c27..244a8a052ce 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -290,7 +290,7 @@ static int do_drive_get_GTF(ide_drive_t *drive, DEBPRINT("ENTER: %s at %s, port#: %d, hard_port#: %d\n", hwif->name, dev->bus_id, port, hwif->channel); - if (!drive->present) { + if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) { DEBPRINT("%s drive %d:%d not present\n", hwif->name, hwif->channel, port); goto out; @@ -420,8 +420,9 @@ static int do_drive_set_taskfiles(ide_drive_t *drive, DEBPRINT("ENTER: %s, hard_port#: %d\n", drive->name, drive->dn); - if (!drive->present) + if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) goto out; + if (!gtf_count) /* shouldn't be here */ goto out; @@ -584,7 +585,7 @@ void ide_acpi_get_timing(ide_hwif_t *hwif) * This function executes the _STM ACPI method for the target channel. * * _STM requires Identify Drive data, which has to passed as an argument. - * Unfortunately hd_driveid is a mangled version which we can't readily + * Unfortunately drive->id is a mangled version which we can't readily * use; hence we'll get the information afresh. */ void ide_acpi_push_timing(ide_hwif_t *hwif) @@ -614,10 +615,10 @@ void ide_acpi_push_timing(ide_hwif_t *hwif) in_params[0].buffer.length = sizeof(struct GTM_buffer); in_params[0].buffer.pointer = (u8 *)&hwif->acpidata->gtm; in_params[1].type = ACPI_TYPE_BUFFER; - in_params[1].buffer.length = sizeof(struct hd_driveid); + in_params[1].buffer.length = sizeof(ATA_ID_WORDS * 2); in_params[1].buffer.pointer = (u8 *)&master->idbuff; in_params[2].type = ACPI_TYPE_BUFFER; - in_params[2].buffer.length = sizeof(struct hd_driveid); + in_params[2].buffer.length = sizeof(ATA_ID_WORDS * 2); in_params[2].buffer.pointer = (u8 *)&slave->idbuff; /* Output buffer: _STM has no output */ @@ -660,7 +661,8 @@ void ide_acpi_set_state(ide_hwif_t *hwif, int on) if (!drive->acpidata->obj_handle) drive->acpidata->obj_handle = ide_acpi_drive_get_handle(drive); - if (drive->acpidata->obj_handle && drive->present) { + if (drive->acpidata->obj_handle && + (drive->dev_flags & IDE_DFLAG_PRESENT)) { acpi_bus_set_power(drive->acpidata->obj_handle, on? ACPI_STATE_D0: ACPI_STATE_D3); } @@ -720,7 +722,7 @@ void ide_acpi_port_init_devices(ide_hwif_t *hwif) memset(drive->acpidata, 0, sizeof(*drive->acpidata)); - if (!drive->present) + if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) continue; err = taskfile_lib_get_identify(drive, drive->acpidata->idbuff); @@ -745,7 +747,7 @@ void ide_acpi_port_init_devices(ide_hwif_t *hwif) for (i = 0; i < MAX_DRIVES; i++) { drive = &hwif->drives[i]; - if (drive->present) + if (drive->dev_flags & IDE_DFLAG_PRESENT) /* Execute ACPI startup code */ ide_acpi_exec_tfs(drive); } diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index adf04f99cde..2e305714c20 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -14,25 +14,268 @@ #define debug_log(fmt, args...) do {} while (0) #endif -/* TODO: unify the code thus making some arguments go away */ -ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc, - ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry, - void (*update_buffers)(ide_drive_t *, struct ide_atapi_pc *), - void (*retry_pc)(ide_drive_t *), void (*dsc_handle)(ide_drive_t *), - void (*io_buffers)(ide_drive_t *, struct ide_atapi_pc *, unsigned, int)) +/* + * Check whether we can support a device, + * based on the ATAPI IDENTIFY command results. + */ +int ide_check_atapi_device(ide_drive_t *drive, const char *s) +{ + u16 *id = drive->id; + u8 gcw[2], protocol, device_type, removable, drq_type, packet_size; + + *((u16 *)&gcw) = id[ATA_ID_CONFIG]; + + protocol = (gcw[1] & 0xC0) >> 6; + device_type = gcw[1] & 0x1F; + removable = (gcw[0] & 0x80) >> 7; + drq_type = (gcw[0] & 0x60) >> 5; + packet_size = gcw[0] & 0x03; + +#ifdef CONFIG_PPC + /* kludge for Apple PowerBook internal zip */ + if (drive->media == ide_floppy && device_type == 5 && + !strstr((char *)&id[ATA_ID_PROD], "CD-ROM") && + strstr((char *)&id[ATA_ID_PROD], "ZIP")) + device_type = 0; +#endif + + if (protocol != 2) + printk(KERN_ERR "%s: %s: protocol (0x%02x) is not ATAPI\n", + s, drive->name, protocol); + else if ((drive->media == ide_floppy && device_type != 0) || + (drive->media == ide_tape && device_type != 1)) + printk(KERN_ERR "%s: %s: invalid device type (0x%02x)\n", + s, drive->name, device_type); + else if (removable == 0) + printk(KERN_ERR "%s: %s: the removable flag is not set\n", + s, drive->name); + else if (drive->media == ide_floppy && drq_type == 3) + printk(KERN_ERR "%s: %s: sorry, DRQ type (0x%02x) not " + "supported\n", s, drive->name, drq_type); + else if (packet_size != 0) + printk(KERN_ERR "%s: %s: packet size (0x%02x) is not 12 " + "bytes\n", s, drive->name, packet_size); + else + return 1; + return 0; +} +EXPORT_SYMBOL_GPL(ide_check_atapi_device); + +/* PIO data transfer routine using the scatter gather table. */ +int ide_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, + unsigned int bcount, int write) +{ + ide_hwif_t *hwif = drive->hwif; + const struct ide_tp_ops *tp_ops = hwif->tp_ops; + xfer_func_t *xf = write ? tp_ops->output_data : tp_ops->input_data; + struct scatterlist *sg = pc->sg; + char *buf; + int count, done = 0; + + while (bcount) { + count = min(sg->length - pc->b_count, bcount); + + if (PageHighMem(sg_page(sg))) { + unsigned long flags; + + local_irq_save(flags); + buf = kmap_atomic(sg_page(sg), KM_IRQ0) + sg->offset; + xf(drive, NULL, buf + pc->b_count, count); + kunmap_atomic(buf - sg->offset, KM_IRQ0); + local_irq_restore(flags); + } else { + buf = sg_virt(sg); + xf(drive, NULL, buf + pc->b_count, count); + } + + bcount -= count; + pc->b_count += count; + done += count; + + if (pc->b_count == sg->length) { + if (!--pc->sg_cnt) + break; + pc->sg = sg = sg_next(sg); + pc->b_count = 0; + } + } + + if (bcount) { + printk(KERN_ERR "%s: %d leftover bytes, %s\n", drive->name, + bcount, write ? "padding with zeros" + : "discarding data"); + ide_pad_transfer(drive, write, bcount); + } + + return done; +} +EXPORT_SYMBOL_GPL(ide_io_buffers); + +void ide_init_pc(struct ide_atapi_pc *pc) +{ + memset(pc, 0, sizeof(*pc)); + pc->buf = pc->pc_buf; + pc->buf_size = IDE_PC_BUFFER_SIZE; +} +EXPORT_SYMBOL_GPL(ide_init_pc); + +/* + * Generate a new packet command request in front of the request queue, before + * the current request, so that it will be processed immediately, on the next + * pass through the driver. + */ +static void ide_queue_pc_head(ide_drive_t *drive, struct gendisk *disk, + struct ide_atapi_pc *pc, struct request *rq) +{ + blk_rq_init(NULL, rq); + rq->cmd_type = REQ_TYPE_SPECIAL; + rq->cmd_flags |= REQ_PREEMPT; + rq->buffer = (char *)pc; + rq->rq_disk = disk; + memcpy(rq->cmd, pc->c, 12); + if (drive->media == ide_tape) + rq->cmd[13] = REQ_IDETAPE_PC1; + ide_do_drive_cmd(drive, rq); +} + +/* + * Add a special packet command request to the tail of the request queue, + * and wait for it to be serviced. + */ +int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk, + struct ide_atapi_pc *pc) +{ + struct request *rq; + int error; + + rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_SPECIAL; + rq->buffer = (char *)pc; + memcpy(rq->cmd, pc->c, 12); + if (drive->media == ide_tape) + rq->cmd[13] = REQ_IDETAPE_PC1; + error = blk_execute_rq(drive->queue, disk, rq, 0); + blk_put_request(rq); + + return error; +} +EXPORT_SYMBOL_GPL(ide_queue_pc_tail); + +int ide_do_test_unit_ready(ide_drive_t *drive, struct gendisk *disk) +{ + struct ide_atapi_pc pc; + + ide_init_pc(&pc); + pc.c[0] = TEST_UNIT_READY; + + return ide_queue_pc_tail(drive, disk, &pc); +} +EXPORT_SYMBOL_GPL(ide_do_test_unit_ready); + +int ide_do_start_stop(ide_drive_t *drive, struct gendisk *disk, int start) +{ + struct ide_atapi_pc pc; + + ide_init_pc(&pc); + pc.c[0] = START_STOP; + pc.c[4] = start; + + if (drive->media == ide_tape) + pc.flags |= PC_FLAG_WAIT_FOR_DSC; + + return ide_queue_pc_tail(drive, disk, &pc); +} +EXPORT_SYMBOL_GPL(ide_do_start_stop); + +int ide_set_media_lock(ide_drive_t *drive, struct gendisk *disk, int on) { + struct ide_atapi_pc pc; + + if (drive->atapi_flags & IDE_AFLAG_NO_DOORLOCK) + return 0; + + ide_init_pc(&pc); + pc.c[0] = ALLOW_MEDIUM_REMOVAL; + pc.c[4] = on; + + return ide_queue_pc_tail(drive, disk, &pc); +} +EXPORT_SYMBOL_GPL(ide_set_media_lock); + +void ide_create_request_sense_cmd(ide_drive_t *drive, struct ide_atapi_pc *pc) +{ + ide_init_pc(pc); + pc->c[0] = REQUEST_SENSE; + if (drive->media == ide_floppy) { + pc->c[4] = 255; + pc->req_xfer = 18; + } else { + pc->c[4] = 20; + pc->req_xfer = 20; + } +} +EXPORT_SYMBOL_GPL(ide_create_request_sense_cmd); + +/* + * Called when an error was detected during the last packet command. + * We queue a request sense packet command in the head of the request list. + */ +void ide_retry_pc(ide_drive_t *drive, struct gendisk *disk) +{ + struct request *rq = &drive->request_sense_rq; + struct ide_atapi_pc *pc = &drive->request_sense_pc; + + (void)ide_read_error(drive); + ide_create_request_sense_cmd(drive, pc); + if (drive->media == ide_tape) + set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags); + ide_queue_pc_head(drive, disk, pc, rq); +} +EXPORT_SYMBOL_GPL(ide_retry_pc); + +int ide_scsi_expiry(ide_drive_t *drive) +{ + struct ide_atapi_pc *pc = drive->pc; + + debug_log("%s called for %lu at %lu\n", __func__, + pc->scsi_cmd->serial_number, jiffies); + + pc->flags |= PC_FLAG_TIMEDOUT; + + return 0; /* we do not want the IDE subsystem to retry */ +} +EXPORT_SYMBOL_GPL(ide_scsi_expiry); + +/* + * This is the usual interrupt handler which will be called during a packet + * command. We will transfer some of the data (as requested by the drive) + * and will re-point interrupt handler to us. + */ +static ide_startstop_t ide_pc_intr(ide_drive_t *drive) +{ + struct ide_atapi_pc *pc = drive->pc; ide_hwif_t *hwif = drive->hwif; struct request *rq = hwif->hwgroup->rq; const struct ide_tp_ops *tp_ops = hwif->tp_ops; xfer_func_t *xferfunc; - unsigned int temp; + ide_expiry_t *expiry; + unsigned int timeout, temp; u16 bcount; - u8 stat, ireason, scsi = drive->scsi; + u8 stat, ireason, scsi = !!(drive->dev_flags & IDE_DFLAG_SCSI), dsc = 0; debug_log("Enter %s - interrupt handler\n", __func__); + if (scsi) { + timeout = ide_scsi_get_timeout(pc); + expiry = ide_scsi_expiry; + } else { + timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD + : WAIT_TAPE_CMD; + expiry = NULL; + } + if (pc->flags & PC_FLAG_TIMEDOUT) { - drive->pc_callback(drive); + drive->pc_callback(drive, 0); return ide_stopped; } @@ -41,7 +284,7 @@ ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc, if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { if (hwif->dma_ops->dma_end(drive) || - (drive->media == ide_tape && !scsi && (stat & ERR_STAT))) { + (drive->media == ide_tape && !scsi && (stat & ATA_ERR))) { if (drive->media == ide_floppy && !scsi) printk(KERN_ERR "%s: DMA %s error\n", drive->name, rq_data_dir(pc->rq) @@ -49,14 +292,14 @@ ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc, pc->flags |= PC_FLAG_DMA_ERROR; } else { pc->xferred = pc->req_xfer; - if (update_buffers) - update_buffers(drive, pc); + if (drive->pc_update_buffers) + drive->pc_update_buffers(drive, pc); } debug_log("%s: DMA finished\n", drive->name); } /* No more interrupts */ - if ((stat & DRQ_STAT) == 0) { + if ((stat & ATA_DRQ) == 0) { debug_log("Packet command completed, %d bytes transferred\n", pc->xferred); @@ -65,10 +308,10 @@ ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc, local_irq_enable_in_hardirq(); if (drive->media == ide_tape && !scsi && - (stat & ERR_STAT) && rq->cmd[0] == REQUEST_SENSE) - stat &= ~ERR_STAT; + (stat & ATA_ERR) && rq->cmd[0] == REQUEST_SENSE) + stat &= ~ATA_ERR; - if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) { + if ((stat & ATA_ERR) || (pc->flags & PC_FLAG_DMA_ERROR)) { /* Error detected */ debug_log("%s: I/O error\n", drive->name); @@ -87,21 +330,19 @@ ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc, debug_log("[cmd %x]: check condition\n", rq->cmd[0]); /* Retry operation */ - retry_pc(drive); + ide_retry_pc(drive, rq->rq_disk); /* queued, but not started */ return ide_stopped; } cmd_finished: pc->error = 0; - if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && - (stat & SEEK_STAT) == 0) { - dsc_handle(drive); - return ide_stopped; - } + + if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && (stat & ATA_DSC) == 0) + dsc = 1; /* Command finished - Call the callback function */ - drive->pc_callback(drive); + drive->pc_callback(drive, dsc); return ide_stopped; } @@ -117,17 +358,18 @@ cmd_finished: /* Get the number of bytes to transfer on this interrupt. */ ide_read_bcount_and_ireason(drive, &bcount, &ireason); - if (ireason & CD) { + if (ireason & ATAPI_COD) { printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__); return ide_do_reset(drive); } - if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) { + if (((ireason & ATAPI_IO) == ATAPI_IO) == + !!(pc->flags & PC_FLAG_WRITING)) { /* Hopefully, we will never get here */ printk(KERN_ERR "%s: We wanted to %s, but the device wants us " "to %s!\n", drive->name, - (ireason & IO) ? "Write" : "Read", - (ireason & IO) ? "Read" : "Write"); + (ireason & ATAPI_IO) ? "Write" : "Read", + (ireason & ATAPI_IO) ? "Read" : "Write"); return ide_do_reset(drive); } @@ -146,7 +388,8 @@ cmd_finished: temp = 0; if (temp) { if (pc->sg) - io_buffers(drive, pc, temp, 0); + drive->pc_io_buffers(drive, pc, + temp, 0); else tp_ops->input_data(drive, NULL, pc->cur_pos, temp); @@ -158,9 +401,7 @@ cmd_finished: pc->xferred += temp; pc->cur_pos += temp; ide_pad_transfer(drive, 0, bcount - temp); - ide_set_handler(drive, handler, timeout, - expiry); - return ide_started; + goto next_irq; } debug_log("The device wants to send us more data than " "expected - allowing transfer\n"); @@ -171,9 +412,14 @@ cmd_finished: if ((drive->media == ide_floppy && !scsi && !pc->buf) || (drive->media == ide_tape && !scsi && pc->bh) || - (scsi && pc->sg)) - io_buffers(drive, pc, bcount, !!(pc->flags & PC_FLAG_WRITING)); - else + (scsi && pc->sg)) { + int done = drive->pc_io_buffers(drive, pc, bcount, + !!(pc->flags & PC_FLAG_WRITING)); + + /* FIXME: don't do partial completions */ + if (drive->media == ide_floppy && !scsi) + ide_end_request(drive, 1, done >> 9); + } else xferfunc(drive, NULL, pc->cur_pos, bcount); /* Update the current position */ @@ -182,12 +428,11 @@ cmd_finished: debug_log("[cmd %x] transferred %d bytes on that intr.\n", rq->cmd[0], bcount); - +next_irq: /* And set the interrupt handler again */ - ide_set_handler(drive, handler, timeout, expiry); + ide_set_handler(drive, ide_pc_intr, timeout, expiry); return ide_started; } -EXPORT_SYMBOL_GPL(ide_pc_intr); static u8 ide_read_ireason(ide_drive_t *drive) { @@ -205,7 +450,8 @@ static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason) { int retries = 100; - while (retries-- && ((ireason & CD) == 0 || (ireason & IO))) { + while (retries-- && ((ireason & ATAPI_COD) == 0 || + (ireason & ATAPI_IO))) { printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing " "a packet command, retrying\n", drive->name); udelay(100); @@ -214,41 +460,71 @@ static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason) printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing " "a packet command, ignoring\n", drive->name); - ireason |= CD; - ireason &= ~IO; + ireason |= ATAPI_COD; + ireason &= ~ATAPI_IO; } } return ireason; } -ide_startstop_t ide_transfer_pc(ide_drive_t *drive, struct ide_atapi_pc *pc, - ide_handler_t *handler, unsigned int timeout, - ide_expiry_t *expiry) +static int ide_delayed_transfer_pc(ide_drive_t *drive) { + /* Send the actual packet */ + drive->hwif->tp_ops->output_data(drive, NULL, drive->pc->c, 12); + + /* Timeout for the packet command */ + return WAIT_FLOPPY_CMD; +} + +static ide_startstop_t ide_transfer_pc(ide_drive_t *drive) +{ + struct ide_atapi_pc *pc = drive->pc; ide_hwif_t *hwif = drive->hwif; struct request *rq = hwif->hwgroup->rq; + ide_expiry_t *expiry; + unsigned int timeout; ide_startstop_t startstop; u8 ireason; - if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) { + if (ide_wait_stat(&startstop, drive, ATA_DRQ, ATA_BUSY, WAIT_READY)) { printk(KERN_ERR "%s: Strange, packet command initiated yet " "DRQ isn't asserted\n", drive->name); return startstop; } ireason = ide_read_ireason(drive); - if (drive->media == ide_tape && !drive->scsi) + if (drive->media == ide_tape && + (drive->dev_flags & IDE_DFLAG_SCSI) == 0) ireason = ide_wait_ireason(drive, ireason); - if ((ireason & CD) == 0 || (ireason & IO)) { + if ((ireason & ATAPI_COD) == 0 || (ireason & ATAPI_IO)) { printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing " "a packet command\n", drive->name); return ide_do_reset(drive); } + /* + * If necessary schedule the packet transfer to occur 'timeout' + * miliseconds later in ide_delayed_transfer_pc() after the device + * says it's ready for a packet. + */ + if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) { + timeout = drive->pc_delay; + expiry = &ide_delayed_transfer_pc; + } else { + if (drive->dev_flags & IDE_DFLAG_SCSI) { + timeout = ide_scsi_get_timeout(pc); + expiry = ide_scsi_expiry; + } else { + timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD + : WAIT_TAPE_CMD; + expiry = NULL; + } + } + /* Set the interrupt routine */ - ide_set_handler(drive, handler, timeout, expiry); + ide_set_handler(drive, ide_pc_intr, timeout, expiry); /* Begin DMA, if necessary */ if (pc->flags & PC_FLAG_DMA_OK) { @@ -262,22 +538,22 @@ ide_startstop_t ide_transfer_pc(ide_drive_t *drive, struct ide_atapi_pc *pc, return ide_started; } -EXPORT_SYMBOL_GPL(ide_transfer_pc); -ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_atapi_pc *pc, - ide_handler_t *handler, unsigned int timeout, +ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout, ide_expiry_t *expiry) { + struct ide_atapi_pc *pc = drive->pc; ide_hwif_t *hwif = drive->hwif; + u32 tf_flags; u16 bcount; - u8 dma = 0; + u8 scsi = !!(drive->dev_flags & IDE_DFLAG_SCSI); /* We haven't transferred any data yet */ pc->xferred = 0; pc->cur_pos = pc->buf; /* Request to transfer the entire buffer at once */ - if (drive->media == ide_tape && !drive->scsi) + if (drive->media == ide_tape && scsi == 0) bcount = pc->req_xfer; else bcount = min(pc->req_xfer, 63 * 1024); @@ -287,28 +563,35 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_atapi_pc *pc, ide_dma_off(drive); } - if ((pc->flags & PC_FLAG_DMA_OK) && drive->using_dma) { - if (drive->scsi) + if ((pc->flags & PC_FLAG_DMA_OK) && + (drive->dev_flags & IDE_DFLAG_USING_DMA)) { + if (scsi) hwif->sg_mapped = 1; - dma = !hwif->dma_ops->dma_setup(drive); - if (drive->scsi) + drive->dma = !hwif->dma_ops->dma_setup(drive); + if (scsi) hwif->sg_mapped = 0; } - if (!dma) + if (!drive->dma) pc->flags &= ~PC_FLAG_DMA_OK; - ide_pktcmd_tf_load(drive, drive->scsi ? 0 : IDE_TFLAG_OUT_DEVICE, - bcount, dma); + if (scsi) + tf_flags = 0; + else if (drive->media == ide_cdrom || drive->media == ide_optical) + tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL; + else + tf_flags = IDE_TFLAG_OUT_DEVICE; + + ide_pktcmd_tf_load(drive, tf_flags, bcount, drive->dma); /* Issue the packet command */ if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) { - ide_execute_command(drive, WIN_PACKETCMD, handler, + ide_execute_command(drive, ATA_CMD_PACKET, ide_transfer_pc, timeout, NULL); return ide_started; } else { ide_execute_pkt_cmd(drive); - return (*handler)(drive); + return ide_transfer_pc(drive); } } EXPORT_SYMBOL_GPL(ide_issue_pc); diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index f1489999cf9..3308b1cd3a3 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -23,6 +23,9 @@ * Documentation/ide/ChangeLog.ide-cd.1994-2004 */ +#define DRV_NAME "ide-cd" +#define PFX DRV_NAME ": " + #define IDECD_VERSION "5.00" #include <linux/module.h> @@ -50,12 +53,15 @@ #include "ide-cd.h" -static DEFINE_MUTEX(idecd_ref_mutex); +#define IDECD_DEBUG_LOG 1 -#define to_ide_cd(obj) container_of(obj, struct cdrom_info, kref) +#if IDECD_DEBUG_LOG +#define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, args) +#else +#define ide_debug_log(lvl, fmt, args...) do {} while (0) +#endif -#define ide_cd_g(disk) \ - container_of((disk)->private_data, struct cdrom_info, driver) +static DEFINE_MUTEX(idecd_ref_mutex); static void ide_cd_release(struct kref *); @@ -64,7 +70,7 @@ static struct cdrom_info *ide_cd_get(struct gendisk *disk) struct cdrom_info *cd = NULL; mutex_lock(&idecd_ref_mutex); - cd = ide_cd_g(disk); + cd = ide_drv_g(disk, cdrom_info); if (cd) { if (ide_device_get(cd->drive)) cd = NULL; @@ -102,6 +108,9 @@ static int cdrom_log_sense(ide_drive_t *drive, struct request *rq, { int log = 0; + ide_debug_log(IDE_DBG_SENSE, "Call %s, sense_key: 0x%x\n", __func__, + sense->sense_key); + if (!sense || !rq || (rq->cmd_flags & REQ_QUIET)) return 0; @@ -150,6 +159,14 @@ static void cdrom_analyze_sense_data(ide_drive_t *drive, unsigned long bio_sectors; struct cdrom_info *info = drive->driver_data; + ide_debug_log(IDE_DBG_SENSE, "Call %s, error_code: 0x%x, " + "sense_key: 0x%x\n", __func__, sense->error_code, + sense->sense_key); + + if (failed_command) + ide_debug_log(IDE_DBG_SENSE, "%s: failed cmd: 0x%x\n", + __func__, failed_command->cmd[0]); + if (!cdrom_log_sense(drive, failed_command, sense)) return; @@ -200,6 +217,8 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, struct cdrom_info *info = drive->driver_data; struct request *rq = &info->request_sense_request; + ide_debug_log(IDE_DBG_SENSE, "Call %s\n", __func__); + if (sense == NULL) sense = &info->sense_data; @@ -219,6 +238,10 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, /* NOTE! Save the failed command in "rq->buffer" */ rq->buffer = (void *) failed_command; + if (failed_command) + ide_debug_log(IDE_DBG_SENSE, "failed_cmd: 0x%x\n", + failed_command->cmd[0]); + ide_do_drive_cmd(drive, rq); } @@ -227,6 +250,10 @@ static void cdrom_end_request(ide_drive_t *drive, int uptodate) struct request *rq = HWGROUP(drive)->rq; int nsectors = rq->hard_cur_sectors; + ide_debug_log(IDE_DBG_FUNC, "Call %s, cmd: 0x%x, uptodate: 0x%x, " + "nsectors: %d\n", __func__, rq->cmd[0], uptodate, + nsectors); + if (blk_sense_request(rq) && uptodate) { /* * For REQ_TYPE_SENSE, "rq->buffer" points to the original @@ -269,6 +296,9 @@ static void cdrom_end_request(ide_drive_t *drive, int uptodate) if (!nsectors) nsectors = 1; + ide_debug_log(IDE_DBG_FUNC, "Exit %s, uptodate: 0x%x, nsectors: %d\n", + __func__, uptodate, nsectors); + ide_end_request(drive, uptodate, nsectors); } @@ -304,11 +334,15 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) sense_key = err >> 4; if (rq == NULL) { - printk(KERN_ERR "%s: missing rq in %s\n", + printk(KERN_ERR PFX "%s: missing rq in %s\n", drive->name, __func__); return 1; } + ide_debug_log(IDE_DBG_RQ, "%s: stat: 0x%x, good_stat: 0x%x, " + "rq->cmd_type: 0x%x, err: 0x%x\n", __func__, stat, + good_stat, rq->cmd_type, err); + if (blk_sense_request(rq)) { /* * We got an error trying to get sense info from the drive @@ -374,7 +408,8 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) cdrom_saw_media_change(drive); /* fail the request */ - printk(KERN_ERR "%s: tray open\n", drive->name); + printk(KERN_ERR PFX "%s: tray open\n", + drive->name); do_end_request = 1; } else { struct cdrom_info *info = drive->driver_data; @@ -436,7 +471,7 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) ide_dump_status_no_sense(drive, "media error (blank)", stat); do_end_request = 1; - } else if ((err & ~ABRT_ERR) != 0) { + } else if ((err & ~ATA_ABORTED) != 0) { /* go to the default handler for other errors */ ide_error(drive, "cdrom_decode_status", stat); return 1; @@ -457,10 +492,10 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) * If we got a CHECK_CONDITION status, queue * a request sense command. */ - if (stat & ERR_STAT) + if (stat & ATA_ERR) cdrom_queue_request_sense(drive, NULL, NULL); } else { - blk_dump_rq_flags(rq, "ide-cd: bad rq"); + blk_dump_rq_flags(rq, PFX "bad rq"); cdrom_end_request(drive, 0); } @@ -468,7 +503,7 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) return 1; end_request: - if (stat & ERR_STAT) { + if (stat & ATA_ERR) { unsigned long flags; spin_lock_irqsave(&ide_lock, flags); @@ -488,6 +523,9 @@ static int cdrom_timer_expiry(ide_drive_t *drive) struct request *rq = HWGROUP(drive)->rq; unsigned long wait = 0; + ide_debug_log(IDE_DBG_RQ, "Call %s: rq->cmd[0]: 0x%x\n", __func__, + rq->cmd[0]); + /* * Some commands are *slow* and normally take a long time to complete. * Usually we can use the ATAPI "disconnect" to bypass this, but not all @@ -504,7 +542,7 @@ static int cdrom_timer_expiry(ide_drive_t *drive) break; default: if (!(rq->cmd_flags & REQ_QUIET)) - printk(KERN_INFO "ide-cd: cmd 0x%x timed out\n", + printk(KERN_INFO PFX "cmd 0x%x timed out\n", rq->cmd[0]); wait = 0; break; @@ -524,24 +562,25 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive, int xferlen, ide_handler_t *handler) { - struct cdrom_info *info = drive->driver_data; ide_hwif_t *hwif = drive->hwif; + ide_debug_log(IDE_DBG_PC, "Call %s, xferlen: %d\n", __func__, xferlen); + /* FIXME: for Virtual DMA we must check harder */ - if (info->dma) - info->dma = !hwif->dma_ops->dma_setup(drive); + if (drive->dma) + drive->dma = !hwif->dma_ops->dma_setup(drive); /* set up the controller registers */ ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL, - xferlen, info->dma); + xferlen, drive->dma); if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) { /* waiting for CDB interrupt, not DMA yet. */ - if (info->dma) + if (drive->dma) drive->waiting_for_dma = 0; /* packet command */ - ide_execute_command(drive, WIN_PACKETCMD, handler, + ide_execute_command(drive, ATA_CMD_PACKET, handler, ATAPI_WAIT_PC, cdrom_timer_expiry); return ide_started; } else { @@ -564,9 +603,10 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive, { ide_hwif_t *hwif = drive->hwif; int cmd_len; - struct cdrom_info *info = drive->driver_data; ide_startstop_t startstop; + ide_debug_log(IDE_DBG_PC, "Call %s\n", __func__); + if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) { /* * Here we should have been called after receiving an interrupt @@ -574,16 +614,16 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive, */ /* check for errors */ - if (cdrom_decode_status(drive, DRQ_STAT, NULL)) + if (cdrom_decode_status(drive, ATA_DRQ, NULL)) return ide_stopped; /* ok, next interrupt will be DMA interrupt */ - if (info->dma) + if (drive->dma) drive->waiting_for_dma = 1; } else { /* otherwise, we must wait for DRQ to get set */ - if (ide_wait_stat(&startstop, drive, DRQ_STAT, - BUSY_STAT, WAIT_READY)) + if (ide_wait_stat(&startstop, drive, ATA_DRQ, + ATA_BUSY, WAIT_READY)) return startstop; } @@ -599,7 +639,7 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive, hwif->tp_ops->output_data(drive, NULL, rq->cmd, cmd_len); /* start the DMA if need be */ - if (info->dma) + if (drive->dma) hwif->dma_ops->dma_start(drive); return ide_started; @@ -615,6 +655,9 @@ static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq, { ide_hwif_t *hwif = drive->hwif; + ide_debug_log(IDE_DBG_FUNC, "Call %s, ireason: 0x%x, rw: 0x%x\n", + __func__, ireason, rw); + /* * ireason == 0: the drive wants to receive data from us * ireason == 2: the drive is expecting to transfer data to us @@ -624,7 +667,7 @@ static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq, else if (ireason == (rw << 1)) { /* whoops... */ - printk(KERN_ERR "%s: %s: wrong transfer direction!\n", + printk(KERN_ERR PFX "%s: %s: wrong transfer direction!\n", drive->name, __func__); ide_pad_transfer(drive, rw, len); @@ -637,7 +680,7 @@ static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq, return 0; } else { /* drive wants a command packet, or invalid ireason... */ - printk(KERN_ERR "%s: %s: bad interrupt reason 0x%02x\n", + printk(KERN_ERR PFX "%s: %s: bad interrupt reason 0x%02x\n", drive->name, __func__, ireason); } @@ -654,17 +697,19 @@ static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq, */ static int ide_cd_check_transfer_size(ide_drive_t *drive, int len) { + ide_debug_log(IDE_DBG_FUNC, "Call %s, len: %d\n", __func__, len); + if ((len % SECTOR_SIZE) == 0) return 0; - printk(KERN_ERR "%s: %s: Bad transfer size %d\n", - drive->name, __func__, len); + printk(KERN_ERR PFX "%s: %s: Bad transfer size %d\n", drive->name, + __func__, len); if (drive->atapi_flags & IDE_AFLAG_LIMIT_NFRAMES) - printk(KERN_ERR " This drive is not supported by " - "this version of the driver\n"); + printk(KERN_ERR PFX "This drive is not supported by this " + "version of the driver\n"); else { - printk(KERN_ERR " Trying to limit transfer sizes\n"); + printk(KERN_ERR PFX "Trying to limit transfer sizes\n"); drive->atapi_flags |= IDE_AFLAG_LIMIT_NFRAMES; } @@ -676,6 +721,9 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *); static ide_startstop_t ide_cd_prepare_rw_request(ide_drive_t *drive, struct request *rq) { + ide_debug_log(IDE_DBG_RQ, "Call %s: rq->cmd_flags: 0x%x\n", __func__, + rq->cmd_flags); + if (rq_data_dir(rq) == READ) { unsigned short sectors_per_frame = queue_hardsect_size(drive->queue) >> SECTOR_BITS; @@ -695,7 +743,7 @@ static ide_startstop_t ide_cd_prepare_rw_request(ide_drive_t *drive, /* sanity check... */ if (rq->current_nr_sectors != bio_cur_sectors(rq->bio)) { - printk(KERN_ERR "%s: %s: buffer botch (%u)\n", + printk(KERN_ERR PFX "%s: %s: buffer botch (%u)\n", drive->name, __func__, rq->current_nr_sectors); cdrom_end_request(drive, 0); @@ -704,11 +752,7 @@ static ide_startstop_t ide_cd_prepare_rw_request(ide_drive_t *drive, rq->current_nr_sectors += nskip; } } -#if 0 - else - /* the immediate bit */ - rq->cmd[1] = 1 << 3; -#endif + /* set up the command */ rq->timeout = ATAPI_WAIT_PC; @@ -739,6 +783,8 @@ static ide_startstop_t cdrom_seek_intr(ide_drive_t *drive) int stat; static int retry = 10; + ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); + if (cdrom_decode_status(drive, 0, &stat)) return ide_stopped; @@ -746,7 +792,7 @@ static ide_startstop_t cdrom_seek_intr(ide_drive_t *drive) if (retry && time_after(jiffies, info->start_seek + IDECD_SEEK_TIMER)) { if (--retry == 0) - drive->dsc_overlap = 0; + drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP; } return ide_stopped; } @@ -755,6 +801,8 @@ static void ide_cd_prepare_seek_request(ide_drive_t *drive, struct request *rq) { sector_t frame = rq->sector; + ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); + sector_div(frame, queue_hardsect_size(drive->queue) >> SECTOR_BITS); memset(rq->cmd, 0, BLK_MAX_CDB); @@ -775,8 +823,11 @@ static ide_startstop_t cdrom_start_seek_continuation(ide_drive_t *drive) * Fix up a possibly partially-processed request so that we can start it over * entirely, or even put it back on the request queue. */ -static void restore_request(struct request *rq) +static void ide_cd_restore_request(ide_drive_t *drive, struct request *rq) { + + ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); + if (rq->buffer != bio_data(rq->bio)) { sector_t n = (rq->buffer - (char *)bio_data(rq->bio)) / SECTOR_SIZE; @@ -795,8 +846,11 @@ static void restore_request(struct request *rq) /* * All other packet commands. */ -static void ide_cd_request_sense_fixup(struct request *rq) +static void ide_cd_request_sense_fixup(ide_drive_t *drive, struct request *rq) { + + ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); + /* * Some of the trailing request sense fields are optional, * and some drives don't send them. Sigh. @@ -822,6 +876,10 @@ int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd, if (!sense) sense = &local_sense; + ide_debug_log(IDE_DBG_PC, "Call %s, rq->cmd[0]: 0x%x, write: 0x%x, " + "timeout: %d, cmd_flags: 0x%x\n", __func__, cmd[0], write, + timeout, cmd_flags); + /* start of retry loop */ do { struct request *rq; @@ -895,7 +953,6 @@ static int cdrom_newpc_intr_dummy_cb(struct request *rq) static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - struct cdrom_info *info = drive->driver_data; struct request *rq = HWGROUP(drive)->rq; xfer_func_t *xferfunc; ide_expiry_t *expiry = NULL; @@ -905,13 +962,16 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) u16 len; u8 ireason; + ide_debug_log(IDE_DBG_PC, "Call %s, rq->cmd[0]: 0x%x, write: 0x%x\n", + __func__, rq->cmd[0], write); + /* check for errors */ - dma = info->dma; + dma = drive->dma; if (dma) { - info->dma = 0; + drive->dma = 0; dma_error = hwif->dma_ops->dma_end(drive); if (dma_error) { - printk(KERN_ERR "%s: DMA %s error\n", drive->name, + printk(KERN_ERR PFX "%s: DMA %s error\n", drive->name, write ? "write" : "read"); ide_dma_off(drive); } @@ -937,8 +997,11 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) if (thislen > len) thislen = len; + ide_debug_log(IDE_DBG_PC, "%s: DRQ: stat: 0x%x, thislen: %d\n", + __func__, stat, thislen); + /* If DRQ is clear, the command has completed. */ - if ((stat & DRQ_STAT) == 0) { + if ((stat & ATA_DRQ) == 0) { if (blk_fs_request(rq)) { /* * If we're not done reading/writing, complain. @@ -946,7 +1009,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) */ uptodate = 1; if (rq->current_nr_sectors > 0) { - printk(KERN_ERR "%s: %s: data underrun " + printk(KERN_ERR PFX "%s: %s: data underrun " "(%d blocks)\n", drive->name, __func__, rq->current_nr_sectors); @@ -957,7 +1020,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) cdrom_end_request(drive, uptodate); return ide_stopped; } else if (!blk_pc_request(rq)) { - ide_cd_request_sense_fixup(rq); + ide_cd_request_sense_fixup(drive, rq); /* complain if we still have data left to transfer */ uptodate = rq->data_len ? 0 : 1; } @@ -1000,6 +1063,9 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) xferfunc = hwif->tp_ops->input_data; } + ide_debug_log(IDE_DBG_PC, "%s: data transfer, rq->cmd_type: 0x%x, " + "ireason: 0x%x\n", __func__, rq->cmd_type, ireason); + /* transfer data */ while (thislen > 0) { u8 *ptr = blk_fs_request(rq) ? NULL : rq->data; @@ -1024,7 +1090,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) */ ide_pad_transfer(drive, 0, thislen); else { - printk(KERN_ERR "%s: confused, missing data\n", + printk(KERN_ERR PFX "%s: confused, missing data\n", drive->name); blk_dump_rq_flags(rq, rq_data_dir(rq) ? "cdrom_newpc_intr, write" @@ -1111,9 +1177,12 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq) unsigned short sectors_per_frame = queue_hardsect_size(drive->queue) >> SECTOR_BITS; + ide_debug_log(IDE_DBG_RQ, "Call %s, write: 0x%x, secs_per_frame: %u\n", + __func__, write, sectors_per_frame); + if (write) { /* disk has become write protected */ - if (cd->disk->policy) { + if (get_disk_ro(cd->disk)) { cdrom_end_request(drive, 0); return ide_stopped; } @@ -1122,7 +1191,7 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq) * We may be retrying this request after an error. Fix up any * weirdness which might be present in the request packet. */ - restore_request(rq); + ide_cd_restore_request(drive, rq); } /* use DMA, if possible / writes *must* be hardware frame aligned */ @@ -1132,9 +1201,9 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq) cdrom_end_request(drive, 0); return ide_stopped; } - cd->dma = 0; + drive->dma = 0; } else - cd->dma = drive->using_dma; + drive->dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA); if (write) cd->devinfo.media_written = 1; @@ -1151,28 +1220,29 @@ static ide_startstop_t cdrom_do_newpc_cont(ide_drive_t *drive) static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) { - struct cdrom_info *info = drive->driver_data; + + ide_debug_log(IDE_DBG_PC, "Call %s, rq->cmd_type: 0x%x\n", __func__, + rq->cmd_type); if (blk_pc_request(rq)) rq->cmd_flags |= REQ_QUIET; else rq->cmd_flags &= ~REQ_FAILED; - info->dma = 0; + drive->dma = 0; /* sg request */ if (rq->bio || ((rq->cmd_type == REQ_TYPE_ATA_PC) && rq->data_len)) { struct request_queue *q = drive->queue; unsigned int alignment; - unsigned long addr; - unsigned long stack_mask = ~(THREAD_SIZE - 1); + char *buf; if (rq->bio) - addr = (unsigned long)bio_data(rq->bio); + buf = bio_data(rq->bio); else - addr = (unsigned long)rq->data; + buf = rq->data; - info->dma = drive->using_dma; + drive->dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA); /* * check if dma is safe @@ -1181,12 +1251,9 @@ static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) * separate masks. */ alignment = queue_dma_alignment(q) | q->dma_pad_mask; - if (addr & alignment || rq->data_len & alignment) - info->dma = 0; - - if (!((addr & stack_mask) ^ - ((unsigned long)current->stack & stack_mask))) - info->dma = 0; + if ((unsigned long)buf & alignment || rq->data_len & alignment + || object_is_on_stack(buf)) + drive->dma = 0; } } @@ -1200,19 +1267,22 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, ide_handler_t *fn; int xferlen; + ide_debug_log(IDE_DBG_RQ, "Call %s, rq->cmd_type: 0x%x, block: %llu\n", + __func__, rq->cmd_type, (unsigned long long)block); + if (blk_fs_request(rq)) { if (drive->atapi_flags & IDE_AFLAG_SEEKING) { ide_hwif_t *hwif = drive->hwif; unsigned long elapsed = jiffies - info->start_seek; int stat = hwif->tp_ops->read_status(hwif); - if ((stat & SEEK_STAT) != SEEK_STAT) { + if ((stat & ATA_DSC) != ATA_DSC) { if (elapsed < IDECD_SEEK_TIMEOUT) { ide_stall_queue(drive, IDECD_SEEK_TIMER); return ide_stopped; } - printk(KERN_ERR "%s: DSC timeout\n", + printk(KERN_ERR PFX "%s: DSC timeout\n", drive->name); } drive->atapi_flags &= ~IDE_AFLAG_SEEKING; @@ -1220,11 +1290,11 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, if (rq_data_dir(rq) == READ && IDE_LARGE_SEEK(info->last_block, block, IDECD_SEEK_THRESHOLD) && - drive->dsc_overlap) { + (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP)) { xferlen = 0; fn = cdrom_start_seek_continuation; - info->dma = 0; + drive->dma = 0; info->start_seek = jiffies; ide_cd_prepare_seek_request(drive, rq); @@ -1253,7 +1323,7 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, cdrom_end_request(drive, 1); return ide_stopped; } else { - blk_dump_rq_flags(rq, "ide-cd bad flags"); + blk_dump_rq_flags(rq, DRV_NAME " bad flags"); cdrom_end_request(drive, 0); return ide_stopped; } @@ -1283,6 +1353,8 @@ int cdrom_check_status(ide_drive_t *drive, struct request_sense *sense) struct cdrom_device_info *cdi = &info->devinfo; unsigned char cmd[BLK_MAX_CDB]; + ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); + memset(cmd, 0, BLK_MAX_CDB); cmd[0] = GPCMD_TEST_UNIT_READY; @@ -1309,6 +1381,8 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity, unsigned len = sizeof(capbuf); u32 blocklen; + ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); + memset(cmd, 0, BLK_MAX_CDB); cmd[0] = GPCMD_READ_CDVD_CAPACITY; @@ -1328,10 +1402,10 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity, case 4096: break; default: - printk(KERN_ERR "%s: weird block size %u\n", - drive->name, blocklen); - printk(KERN_ERR "%s: default to 2kb block size\n", - drive->name); + printk(KERN_ERR PFX "%s: weird block size %u\n", + drive->name, blocklen); + printk(KERN_ERR PFX "%s: default to 2kb block size\n", + drive->name); blocklen = 2048; break; } @@ -1347,6 +1421,8 @@ static int cdrom_read_tocentry(ide_drive_t *drive, int trackno, int msf_flag, { unsigned char cmd[BLK_MAX_CDB]; + ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); + memset(cmd, 0, BLK_MAX_CDB); cmd[0] = GPCMD_READ_TOC_PMA_ATIP; @@ -1375,11 +1451,13 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) long last_written; unsigned long sectors_per_frame = SECTORS_PER_FRAME; + ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); + if (toc == NULL) { /* try to allocate space */ toc = kmalloc(sizeof(struct atapi_toc), GFP_KERNEL); if (toc == NULL) { - printk(KERN_ERR "%s: No cdrom TOC buffer!\n", + printk(KERN_ERR PFX "%s: No cdrom TOC buffer!\n", drive->name); return -ENOMEM; } @@ -1535,6 +1613,8 @@ int ide_cdrom_get_capabilities(ide_drive_t *drive, u8 *buf) struct packet_command cgc; int stat, attempts = 3, size = ATAPI_CAPABILITIES_PAGE_SIZE; + ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); + if ((drive->atapi_flags & IDE_AFLAG_FULL_CAPS_PAGE) == 0) size -= ATAPI_CAPABILITIES_PAGE_PAD_SIZE; @@ -1553,6 +1633,8 @@ void ide_cdrom_update_speed(ide_drive_t *drive, u8 *buf) struct cdrom_info *cd = drive->driver_data; u16 curspeed, maxspeed; + ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); + if (drive->atapi_flags & IDE_AFLAG_LE_SPEED_FIELDS) { curspeed = le16_to_cpup((__le16 *)&buf[8 + 14]); maxspeed = le16_to_cpup((__le16 *)&buf[8 + 8]); @@ -1593,6 +1675,8 @@ static int ide_cdrom_register(ide_drive_t *drive, int nslots) struct cdrom_info *info = drive->driver_data; struct cdrom_device_info *devinfo = &info->devinfo; + ide_debug_log(IDE_DBG_PROBE, "Call %s, nslots: %d\n", __func__, nslots); + devinfo->ops = &ide_cdrom_dops; devinfo->speed = info->current_speed; devinfo->capacity = nslots; @@ -1614,13 +1698,17 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive) mechtype_t mechtype; int nslots = 1; + ide_debug_log(IDE_DBG_PROBE, "Call %s, drive->media: 0x%x, " + "drive->atapi_flags: 0x%lx\n", __func__, drive->media, + drive->atapi_flags); + cdi->mask = (CDC_CD_R | CDC_CD_RW | CDC_DVD | CDC_DVD_R | CDC_DVD_RAM | CDC_SELECT_DISC | CDC_PLAY_AUDIO | CDC_MO_DRIVE | CDC_RAM); if (drive->media == ide_optical) { cdi->mask &= ~(CDC_MO_DRIVE | CDC_RAM); - printk(KERN_ERR "%s: ATAPI magneto-optical drive\n", + printk(KERN_ERR PFX "%s: ATAPI magneto-optical drive\n", drive->name); return nslots; } @@ -1661,7 +1749,9 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive) cdi->mask &= ~CDC_PLAY_AUDIO; mechtype = buf[8 + 6] >> 5; - if (mechtype == mechtype_caddy || mechtype == mechtype_popup) + if (mechtype == mechtype_caddy || + mechtype == mechtype_popup || + (drive->atapi_flags & IDE_AFLAG_NO_AUTOCLOSE)) cdi->mask |= CDC_CLOSE_TRAY; if (cdi->sanyo_slot > 0) { @@ -1676,7 +1766,7 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive) ide_cdrom_update_speed(drive, buf); - printk(KERN_INFO "%s: ATAPI", drive->name); + printk(KERN_INFO PFX "%s: ATAPI", drive->name); /* don't print speed if the drive reported 0 */ if (cd->max_speed) @@ -1699,7 +1789,8 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive) else printk(KERN_CONT " drive"); - printk(KERN_CONT ", %dkB Cache\n", be16_to_cpup((__be16 *)&buf[8 + 12])); + printk(KERN_CONT ", %dkB Cache\n", + be16_to_cpup((__be16 *)&buf[8 + 12])); return nslots; } @@ -1811,13 +1902,12 @@ static ide_proc_entry_t idecd_proc[] = { { NULL, 0, NULL, NULL } }; -static void ide_cdrom_add_settings(ide_drive_t *drive) -{ - ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, - &drive->dsc_overlap, NULL); -} -#else -static inline void ide_cdrom_add_settings(ide_drive_t *drive) { ; } +ide_devset_rw_flag(dsc_overlap, IDE_DFLAG_DSC_OVERLAP); + +static const struct ide_proc_devset idecd_settings[] = { + IDE_PROC_DEVSET(dsc_overlap, 0, 1), + { 0 }, +}; #endif static const struct cd_list_entry ide_cd_quirks_list[] = { @@ -1859,17 +1949,19 @@ static const struct cd_list_entry ide_cd_quirks_list[] = { { "MATSHITADVD-ROM SR-8176", NULL, IDE_AFLAG_PLAY_AUDIO_OK }, { "MATSHITADVD-ROM SR-8174", NULL, IDE_AFLAG_PLAY_AUDIO_OK }, { "Optiarc DVD RW AD-5200A", NULL, IDE_AFLAG_PLAY_AUDIO_OK }, + { "Optiarc DVD RW AD-7200A", NULL, IDE_AFLAG_PLAY_AUDIO_OK }, + { "Optiarc DVD RW AD-7543A", NULL, IDE_AFLAG_NO_AUTOCLOSE }, { NULL, NULL, 0 } }; -static unsigned int ide_cd_flags(struct hd_driveid *id) +static unsigned int ide_cd_flags(u16 *id) { const struct cd_list_entry *cle = ide_cd_quirks_list; while (cle->id_model) { - if (strcmp(cle->id_model, id->model) == 0 && + if (strcmp(cle->id_model, (char *)&id[ATA_ID_PROD]) == 0 && (cle->id_firmware == NULL || - strstr(id->fw_rev, cle->id_firmware))) + strstr((char *)&id[ATA_ID_FW_REV], cle->id_firmware))) return cle->cd_flags; cle++; } @@ -1881,9 +1973,12 @@ static int ide_cdrom_setup(ide_drive_t *drive) { struct cdrom_info *cd = drive->driver_data; struct cdrom_device_info *cdi = &cd->devinfo; - struct hd_driveid *id = drive->id; + u16 *id = drive->id; + char *fw_rev = (char *)&id[ATA_ID_FW_REV]; int nslots; + ide_debug_log(IDE_DBG_PROBE, "Call %s\n", __func__); + blk_queue_prep_rq(drive->queue, ide_cdrom_prep_fn); blk_queue_dma_alignment(drive->queue, 31); blk_queue_update_dma_pad(drive->queue, 15); @@ -1891,20 +1986,15 @@ static int ide_cdrom_setup(ide_drive_t *drive) if (!drive->queue->unplug_delay) drive->queue->unplug_delay = 1; - drive->special.all = 0; - drive->atapi_flags = IDE_AFLAG_MEDIA_CHANGED | IDE_AFLAG_NO_EJECT | ide_cd_flags(id); - if ((id->config & 0x0060) == 0x20) - drive->atapi_flags |= IDE_AFLAG_DRQ_INTERRUPT; - if ((drive->atapi_flags & IDE_AFLAG_VERTOS_300_SSD) && - id->fw_rev[4] == '1' && id->fw_rev[6] <= '2') + fw_rev[4] == '1' && fw_rev[6] <= '2') drive->atapi_flags |= (IDE_AFLAG_TOCTRACKS_AS_BCD | IDE_AFLAG_TOCADDR_AS_BCD); else if ((drive->atapi_flags & IDE_AFLAG_VERTOS_600_ESD) && - id->fw_rev[4] == '1' && id->fw_rev[6] <= '2') + fw_rev[4] == '1' && fw_rev[6] <= '2') drive->atapi_flags |= IDE_AFLAG_TOCTRACKS_AS_BCD; else if (drive->atapi_flags & IDE_AFLAG_SANYO_3CD) /* 3 => use CD in slot 0 */ @@ -1915,15 +2005,19 @@ static int ide_cdrom_setup(ide_drive_t *drive) /* set correct block size */ blk_queue_hardsect_size(drive->queue, CD_FRAMESIZE); - drive->dsc_overlap = (drive->next != drive); + if (drive->next != drive) + drive->dev_flags |= IDE_DFLAG_DSC_OVERLAP; + else + drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP; if (ide_cdrom_register(drive, nslots)) { - printk(KERN_ERR "%s: %s failed to register device with the" + printk(KERN_ERR PFX "%s: %s failed to register device with the" " cdrom driver.\n", drive->name, __func__); cd->devinfo.handle = NULL; return 1; } - ide_cdrom_add_settings(drive); + + ide_proc_register_driver(drive, cd->driver); return 0; } @@ -1931,9 +2025,10 @@ static void ide_cd_remove(ide_drive_t *drive) { struct cdrom_info *info = drive->driver_data; + ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); + ide_proc_unregister_driver(drive, info->driver); - blk_unregister_filter(info->disk); del_gendisk(info->disk); ide_cd_put(info); @@ -1941,15 +2036,17 @@ static void ide_cd_remove(ide_drive_t *drive) static void ide_cd_release(struct kref *kref) { - struct cdrom_info *info = to_ide_cd(kref); + struct cdrom_info *info = to_ide_drv(kref, cdrom_info); struct cdrom_device_info *devinfo = &info->devinfo; ide_drive_t *drive = info->drive; struct gendisk *g = info->disk; + ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); + kfree(info->toc); if (devinfo->handle == drive) unregister_cdrom(devinfo); - drive->dsc_overlap = 0; + drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP; drive->driver_data = NULL; blk_queue_prep_rq(drive->queue, NULL); g->private_data = NULL; @@ -1968,13 +2065,12 @@ static ide_driver_t ide_cdrom_driver = { .probe = ide_cd_probe, .remove = ide_cd_remove, .version = IDECD_VERSION, - .media = ide_cdrom, - .supports_dsc_overlap = 1, .do_request = ide_cd_do_request, .end_request = ide_end_request, .error = __ide_error, #ifdef CONFIG_IDE_PROC_FS .proc = idecd_proc, + .settings = idecd_settings, #endif }; @@ -1999,7 +2095,7 @@ static int idecd_open(struct inode *inode, struct file *file) static int idecd_release(struct inode *inode, struct file *file) { struct gendisk *disk = inode->i_bdev->bd_disk; - struct cdrom_info *info = ide_cd_g(disk); + struct cdrom_info *info = ide_drv_g(disk, cdrom_info); cdrom_release(&info->devinfo, file); @@ -2051,7 +2147,7 @@ static int idecd_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { struct block_device *bdev = inode->i_bdev; - struct cdrom_info *info = ide_cd_g(bdev->bd_disk); + struct cdrom_info *info = ide_drv_g(bdev->bd_disk, cdrom_info); int err; switch (cmd) { @@ -2072,13 +2168,13 @@ static int idecd_ioctl(struct inode *inode, struct file *file, static int idecd_media_changed(struct gendisk *disk) { - struct cdrom_info *info = ide_cd_g(disk); + struct cdrom_info *info = ide_drv_g(disk, cdrom_info); return cdrom_media_changed(&info->devinfo); } static int idecd_revalidate_disk(struct gendisk *disk) { - struct cdrom_info *info = ide_cd_g(disk); + struct cdrom_info *info = ide_drv_g(disk, cdrom_info); struct request_sense sense; ide_cd_read_toc(info->drive, &sense); @@ -2097,8 +2193,11 @@ static struct block_device_operations idecd_ops = { /* module options */ static char *ignore; - module_param(ignore, charp, 0400); + +static unsigned long debug_mask; +module_param(debug_mask, ulong, 0644); + MODULE_DESCRIPTION("ATAPI CD-ROM Driver"); static int ide_cd_probe(ide_drive_t *drive) @@ -2107,23 +2206,30 @@ static int ide_cd_probe(ide_drive_t *drive) struct gendisk *g; struct request_sense sense; + ide_debug_log(IDE_DBG_PROBE, "Call %s, drive->driver_req: %s, " + "drive->media: 0x%x\n", __func__, drive->driver_req, + drive->media); + if (!strstr("ide-cdrom", drive->driver_req)) goto failed; - if (!drive->present) - goto failed; + if (drive->media != ide_cdrom && drive->media != ide_optical) goto failed; + /* skip drives that we were told to ignore */ if (ignore != NULL) { if (strstr(ignore, drive->name)) { - printk(KERN_INFO "ide-cd: ignoring drive %s\n", + printk(KERN_INFO PFX "ignoring drive %s\n", drive->name); goto failed; } } + + drive->debug_mask = debug_mask; + info = kzalloc(sizeof(struct cdrom_info), GFP_KERNEL); if (info == NULL) { - printk(KERN_ERR "%s: Can't allocate a cdrom structure\n", + printk(KERN_ERR PFX "%s: Can't allocate a cdrom structure\n", drive->name); goto failed; } @@ -2134,8 +2240,6 @@ static int ide_cd_probe(ide_drive_t *drive) ide_init_disk(g, drive); - ide_proc_register_driver(drive, &ide_cdrom_driver); - kref_init(&info->kref); info->drive = drive; @@ -2150,7 +2254,6 @@ static int ide_cd_probe(ide_drive_t *drive) g->driverfs_dev = &drive->gendev; g->flags = GENHD_FL_CD | GENHD_FL_REMOVABLE; if (ide_cdrom_setup(drive)) { - ide_proc_unregister_driver(drive, &ide_cdrom_driver); ide_cd_release(&info->kref); goto failed; } @@ -2159,7 +2262,6 @@ static int ide_cd_probe(ide_drive_t *drive) g->fops = &idecd_ops; g->flags |= GENHD_FL_REMOVABLE; add_disk(g); - blk_register_filter(g); return 0; out_free_cd: @@ -2175,6 +2277,7 @@ static void __exit ide_cdrom_exit(void) static int __init ide_cdrom_init(void) { + printk(KERN_INFO DRV_NAME " driver " IDECD_VERSION "\n"); return driver_register(&ide_cdrom_driver.gen_driver); } diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h index 61a4599b77d..5882b9a9ea8 100644 --- a/drivers/ide/ide-cd.h +++ b/drivers/ide/ide-cd.h @@ -88,7 +88,6 @@ struct cdrom_info { struct request_sense sense_data; struct request request_sense_request; - int dma; unsigned long last_block; unsigned long start_seek; diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 07ef88bd109..3853bde8eed 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -30,10 +30,8 @@ #include <linux/delay.h> #include <linux/mutex.h> #include <linux/leds.h> - -#define _IDE_DISK - #include <linux/ide.h> +#include <linux/hdreg.h> #include <asm/byteorder.h> #include <asm/irq.h> @@ -41,21 +39,18 @@ #include <asm/io.h> #include <asm/div64.h> -struct ide_disk_obj { - ide_drive_t *drive; - ide_driver_t *driver; - struct gendisk *disk; - struct kref kref; - unsigned int openers; /* protected by BKL for now */ -}; +#if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT) +#define IDE_DISK_MINORS (1 << PARTN_BITS) +#else +#define IDE_DISK_MINORS 0 +#endif + +#include "ide-disk.h" static DEFINE_MUTEX(idedisk_ref_mutex); #define to_ide_disk(obj) container_of(obj, struct ide_disk_obj, kref) -#define ide_disk_g(disk) \ - container_of((disk)->private_data, struct ide_disk_obj, driver) - static void ide_disk_release(struct kref *); static struct ide_disk_obj *ide_disk_get(struct gendisk *disk) @@ -84,68 +79,19 @@ static void ide_disk_put(struct ide_disk_obj *idkp) mutex_unlock(&idedisk_ref_mutex); } -/* - * lba_capacity_is_ok() performs a sanity check on the claimed "lba_capacity" - * value for this drive (from its reported identification information). - * - * Returns: 1 if lba_capacity looks sensible - * 0 otherwise - * - * It is called only once for each drive. - */ -static int lba_capacity_is_ok(struct hd_driveid *id) -{ - unsigned long lba_sects, chs_sects, head, tail; - - /* No non-LBA info .. so valid! */ - if (id->cyls == 0) - return 1; - - /* - * The ATA spec tells large drives to return - * C/H/S = 16383/16/63 independent of their size. - * Some drives can be jumpered to use 15 heads instead of 16. - * Some drives can be jumpered to use 4092 cyls instead of 16383. - */ - if ((id->cyls == 16383 - || (id->cyls == 4092 && id->cur_cyls == 16383)) && - id->sectors == 63 && - (id->heads == 15 || id->heads == 16) && - (id->lba_capacity >= 16383*63*id->heads)) - return 1; - - lba_sects = id->lba_capacity; - chs_sects = id->cyls * id->heads * id->sectors; - - /* perform a rough sanity check on lba_sects: within 10% is OK */ - if ((lba_sects - chs_sects) < chs_sects/10) - return 1; - - /* some drives have the word order reversed */ - head = ((lba_sects >> 16) & 0xffff); - tail = (lba_sects & 0xffff); - lba_sects = (head | (tail << 16)); - if ((lba_sects - chs_sects) < chs_sects/10) { - id->lba_capacity = lba_sects; - return 1; /* lba_capacity is (now) good */ - } - - return 0; /* lba_capacity value may be bad */ -} - static const u8 ide_rw_cmds[] = { - WIN_MULTREAD, - WIN_MULTWRITE, - WIN_MULTREAD_EXT, - WIN_MULTWRITE_EXT, - WIN_READ, - WIN_WRITE, - WIN_READ_EXT, - WIN_WRITE_EXT, - WIN_READDMA, - WIN_WRITEDMA, - WIN_READDMA_EXT, - WIN_WRITEDMA_EXT, + ATA_CMD_READ_MULTI, + ATA_CMD_WRITE_MULTI, + ATA_CMD_READ_MULTI_EXT, + ATA_CMD_WRITE_MULTI_EXT, + ATA_CMD_PIO_READ, + ATA_CMD_PIO_WRITE, + ATA_CMD_PIO_READ_EXT, + ATA_CMD_PIO_WRITE_EXT, + ATA_CMD_READ, + ATA_CMD_WRITE, + ATA_CMD_READ_EXT, + ATA_CMD_WRITE_EXT, }; static const u8 ide_data_phases[] = { @@ -185,9 +131,9 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, sector_t block) { ide_hwif_t *hwif = HWIF(drive); - unsigned int dma = drive->using_dma; u16 nsectors = (u16)rq->nr_sectors; - u8 lba48 = (drive->addressing == 1) ? 1 : 0; + u8 lba48 = !!(drive->dev_flags & IDE_DFLAG_LBA48); + u8 dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA); ide_task_t task; struct ide_taskfile *tf = &task.tf; ide_startstop_t rc; @@ -207,7 +153,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, memset(&task, 0, sizeof(task)); task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; - if (drive->select.b.lba) { + if (drive->dev_flags & IDE_DFLAG_LBA) { if (lba48) { pr_debug("%s: LBA=0x%012llx\n", drive->name, (unsigned long long)block); @@ -232,6 +178,8 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, tf->lbah = block >>= 8; tf->device = (block >> 8) & 0xf; } + + tf->device |= ATA_LBA; } else { unsigned int sect, head, cyl, track; @@ -282,7 +230,7 @@ static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq, { ide_hwif_t *hwif = HWIF(drive); - BUG_ON(drive->blocked); + BUG_ON(drive->dev_flags & IDE_DFLAG_BLOCKED); if (!blk_fs_request(rq)) { blk_dump_rq_flags(rq, "ide_do_rw_disk - bad command"); @@ -316,9 +264,9 @@ static u64 idedisk_read_native_max_address(ide_drive_t *drive, int lba48) /* Create IDE/ATA command request structure */ memset(&args, 0, sizeof(ide_task_t)); if (lba48) - tf->command = WIN_READ_NATIVE_MAX_EXT; + tf->command = ATA_CMD_READ_NATIVE_MAX_EXT; else - tf->command = WIN_READ_NATIVE_MAX; + tf->command = ATA_CMD_READ_NATIVE_MAX; tf->device = ATA_LBA; args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; if (lba48) @@ -353,10 +301,10 @@ static u64 idedisk_set_max_address(ide_drive_t *drive, u64 addr_req, int lba48) tf->hob_lbal = (addr_req >>= 8) & 0xff; tf->hob_lbam = (addr_req >>= 8) & 0xff; tf->hob_lbah = (addr_req >>= 8) & 0xff; - tf->command = WIN_SET_MAX_EXT; + tf->command = ATA_CMD_SET_MAX_EXT; } else { tf->device = (addr_req >>= 8) & 0x0f; - tf->command = WIN_SET_MAX; + tf->command = ATA_CMD_SET_MAX; } tf->device |= ATA_LBA; args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; @@ -379,25 +327,6 @@ static unsigned long long sectors_to_MB(unsigned long long n) } /* - * Bits 10 of command_set_1 and cfs_enable_1 must be equal, - * so on non-buggy drives we need test only one. - * However, we should also check whether these fields are valid. - */ -static inline int idedisk_supports_hpa(const struct hd_driveid *id) -{ - return (id->command_set_1 & 0x0400) && (id->cfs_enable_1 & 0x0400); -} - -/* - * The same here. - */ -static inline int idedisk_supports_lba48(const struct hd_driveid *id) -{ - return (id->command_set_2 & 0x0400) && (id->cfs_enable_2 & 0x0400) - && id->lba_capacity_2; -} - -/* * Some disks report total number of sectors instead of * maximum sector address. We list them here. */ @@ -411,7 +340,7 @@ static const struct drive_list_entry hpa_list[] = { static void idedisk_check_hpa(ide_drive_t *drive) { unsigned long long capacity, set_max; - int lba48 = idedisk_supports_lba48(drive->id); + int lba48 = ata_id_lba48_enabled(drive->id); capacity = drive->capacity64; @@ -447,139 +376,40 @@ static void idedisk_check_hpa(ide_drive_t *drive) static void init_idedisk_capacity(ide_drive_t *drive) { - struct hd_driveid *id = drive->id; - /* - * If this drive supports the Host Protected Area feature set, - * then we may need to change our opinion about the drive's capacity. - */ - int hpa = idedisk_supports_hpa(id); + u16 *id = drive->id; + int lba; - if (idedisk_supports_lba48(id)) { + if (ata_id_lba48_enabled(id)) { /* drive speaks 48-bit LBA */ - drive->select.b.lba = 1; - drive->capacity64 = id->lba_capacity_2; - if (hpa) - idedisk_check_hpa(drive); - } else if ((id->capability & 2) && lba_capacity_is_ok(id)) { + lba = 1; + drive->capacity64 = ata_id_u64(id, ATA_ID_LBA_CAPACITY_2); + } else if (ata_id_has_lba(id) && ata_id_is_lba_capacity_ok(id)) { /* drive speaks 28-bit LBA */ - drive->select.b.lba = 1; - drive->capacity64 = id->lba_capacity; - if (hpa) - idedisk_check_hpa(drive); + lba = 1; + drive->capacity64 = ata_id_u32(id, ATA_ID_LBA_CAPACITY); } else { /* drive speaks boring old 28-bit CHS */ + lba = 0; drive->capacity64 = drive->cyl * drive->head * drive->sect; } -} - -static sector_t idedisk_capacity(ide_drive_t *drive) -{ - return drive->capacity64 - drive->sect0; -} - -#ifdef CONFIG_IDE_PROC_FS -static int smart_enable(ide_drive_t *drive) -{ - ide_task_t args; - struct ide_taskfile *tf = &args.tf; - - memset(&args, 0, sizeof(ide_task_t)); - tf->feature = SMART_ENABLE; - tf->lbam = SMART_LCYL_PASS; - tf->lbah = SMART_HCYL_PASS; - tf->command = WIN_SMART; - args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; - return ide_no_data_taskfile(drive, &args); -} -static int get_smart_data(ide_drive_t *drive, u8 *buf, u8 sub_cmd) -{ - ide_task_t args; - struct ide_taskfile *tf = &args.tf; - - memset(&args, 0, sizeof(ide_task_t)); - tf->feature = sub_cmd; - tf->nsect = 0x01; - tf->lbam = SMART_LCYL_PASS; - tf->lbah = SMART_HCYL_PASS; - tf->command = WIN_SMART; - args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; - args.data_phase = TASKFILE_IN; - (void) smart_enable(drive); - return ide_raw_taskfile(drive, &args, buf, 1); -} - -static int proc_idedisk_read_cache - (char *page, char **start, off_t off, int count, int *eof, void *data) -{ - ide_drive_t *drive = (ide_drive_t *) data; - char *out = page; - int len; + if (lba) { + drive->dev_flags |= IDE_DFLAG_LBA; - if (drive->id_read) - len = sprintf(out, "%i\n", drive->id->buf_size / 2); - else - len = sprintf(out, "(none)\n"); - - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); -} - -static int proc_idedisk_read_capacity - (char *page, char **start, off_t off, int count, int *eof, void *data) -{ - ide_drive_t*drive = (ide_drive_t *)data; - int len; - - len = sprintf(page, "%llu\n", (long long)idedisk_capacity(drive)); - - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); -} - -static int proc_idedisk_read_smart(char *page, char **start, off_t off, - int count, int *eof, void *data, u8 sub_cmd) -{ - ide_drive_t *drive = (ide_drive_t *)data; - int len = 0, i = 0; - - if (get_smart_data(drive, page, sub_cmd) == 0) { - unsigned short *val = (unsigned short *) page; - char *out = ((char *)val) + (SECTOR_WORDS * 4); - page = out; - do { - out += sprintf(out, "%04x%c", le16_to_cpu(*val), - (++i & 7) ? ' ' : '\n'); - val += 1; - } while (i < (SECTOR_WORDS * 2)); - len = out - page; + /* + * If this device supports the Host Protected Area feature set, + * then we may need to change our opinion about its capacity. + */ + if (ata_id_hpa_enabled(id)) + idedisk_check_hpa(drive); } - - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); -} - -static int proc_idedisk_read_sv - (char *page, char **start, off_t off, int count, int *eof, void *data) -{ - return proc_idedisk_read_smart(page, start, off, count, eof, data, - SMART_READ_VALUES); } -static int proc_idedisk_read_st - (char *page, char **start, off_t off, int count, int *eof, void *data) +sector_t ide_disk_capacity(ide_drive_t *drive) { - return proc_idedisk_read_smart(page, start, off, count, eof, data, - SMART_READ_THRESHOLDS); + return drive->capacity64; } -static ide_proc_entry_t idedisk_proc[] = { - { "cache", S_IFREG|S_IRUGO, proc_idedisk_read_cache, NULL }, - { "capacity", S_IFREG|S_IRUGO, proc_idedisk_read_capacity, NULL }, - { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL }, - { "smart_values", S_IFREG|S_IRUSR, proc_idedisk_read_sv, NULL }, - { "smart_thresholds", S_IFREG|S_IRUSR, proc_idedisk_read_st, NULL }, - { NULL, 0, NULL, NULL } -}; -#endif /* CONFIG_IDE_PROC_FS */ - static void idedisk_prepare_flush(struct request_queue *q, struct request *rq) { ide_drive_t *drive = q->queuedata; @@ -589,11 +419,11 @@ static void idedisk_prepare_flush(struct request_queue *q, struct request *rq) BUG_ON(task == NULL); memset(task, 0, sizeof(*task)); - if (ide_id_has_flush_cache_ext(drive->id) && + if (ata_id_flush_ext_enabled(drive->id) && (drive->capacity64 >= (1UL << 28))) - task->tf.command = WIN_FLUSH_CACHE_EXT; + task->tf.command = ATA_CMD_FLUSH_EXT; else - task->tf.command = WIN_FLUSH_CACHE; + task->tf.command = ATA_CMD_FLUSH; task->tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE | IDE_TFLAG_DYN; task->data_phase = TASKFILE_NO_DATA; @@ -603,6 +433,8 @@ static void idedisk_prepare_flush(struct request_queue *q, struct request *rq) rq->special = task; } +ide_devset_get(multcount, mult_count); + /* * This is tightly woven into the driver->do_special can not touch. * DON'T do it again until a total personality rewrite is committed. @@ -612,7 +444,7 @@ static int set_multcount(ide_drive_t *drive, int arg) struct request *rq; int error; - if (arg < 0 || arg > drive->id->max_multsect) + if (arg < 0 || arg > (drive->id[ATA_ID_MAX_MULTSECT] & 0xff)) return -EINVAL; if (drive->special.b.set_multmode) @@ -629,26 +461,43 @@ static int set_multcount(ide_drive_t *drive, int arg) return (drive->mult_count == arg) ? 0 : -EIO; } +ide_devset_get_flag(nowerr, IDE_DFLAG_NOWERR); + static int set_nowerr(ide_drive_t *drive, int arg) { if (arg < 0 || arg > 1) return -EINVAL; - if (ide_spin_wait_hwgroup(drive)) - return -EBUSY; - drive->nowerr = arg; + if (arg) + drive->dev_flags |= IDE_DFLAG_NOWERR; + else + drive->dev_flags &= ~IDE_DFLAG_NOWERR; + drive->bad_wstat = arg ? BAD_R_STAT : BAD_W_STAT; - spin_unlock_irq(&ide_lock); + return 0; } +static int ide_do_setfeature(ide_drive_t *drive, u8 feature, u8 nsect) +{ + ide_task_t task; + + memset(&task, 0, sizeof(task)); + task.tf.feature = feature; + task.tf.nsect = nsect; + task.tf.command = ATA_CMD_SET_FEATURES; + task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + + return ide_no_data_taskfile(drive, &task); +} + static void update_ordered(ide_drive_t *drive) { - struct hd_driveid *id = drive->id; + u16 *id = drive->id; unsigned ordered = QUEUE_ORDERED_NONE; prepare_flush_fn *prep_fn = NULL; - if (drive->wcache) { + if (drive->dev_flags & IDE_DFLAG_WCACHE) { unsigned long long capacity; int barrier; /* @@ -659,10 +508,12 @@ static void update_ordered(ide_drive_t *drive) * time we have trimmed the drive capacity if LBA48 is * not available so we don't need to recheck that. */ - capacity = idedisk_capacity(drive); - barrier = ide_id_has_flush_cache(id) && !drive->noflush && - (drive->addressing == 0 || capacity <= (1ULL << 28) || - ide_id_has_flush_cache_ext(id)); + capacity = ide_disk_capacity(drive); + barrier = ata_id_flush_enabled(id) && + (drive->dev_flags & IDE_DFLAG_NOFLUSH) == 0 && + ((drive->dev_flags & IDE_DFLAG_LBA48) == 0 || + capacity <= (1ULL << 28) || + ata_id_flush_ext_enabled(id)); printk(KERN_INFO "%s: cache flushes %ssupported\n", drive->name, barrier ? "" : "not "); @@ -677,23 +528,24 @@ static void update_ordered(ide_drive_t *drive) blk_queue_ordered(drive->queue, ordered, prep_fn); } -static int write_cache(ide_drive_t *drive, int arg) +ide_devset_get_flag(wcache, IDE_DFLAG_WCACHE); + +static int set_wcache(ide_drive_t *drive, int arg) { - ide_task_t args; int err = 1; if (arg < 0 || arg > 1) return -EINVAL; - if (ide_id_has_flush_cache(drive->id)) { - memset(&args, 0, sizeof(ide_task_t)); - args.tf.feature = arg ? - SETFEATURES_EN_WCACHE : SETFEATURES_DIS_WCACHE; - args.tf.command = WIN_SETFEATURES; - args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; - err = ide_no_data_taskfile(drive, &args); - if (err == 0) - drive->wcache = arg; + if (ata_id_flush_enabled(drive->id)) { + err = ide_do_setfeature(drive, + arg ? SETFEATURES_WC_ON : SETFEATURES_WC_OFF, 0); + if (err == 0) { + if (arg) + drive->dev_flags |= IDE_DFLAG_WCACHE; + else + drive->dev_flags &= ~IDE_DFLAG_WCACHE; + } } update_ordered(drive); @@ -706,108 +558,88 @@ static int do_idedisk_flushcache(ide_drive_t *drive) ide_task_t args; memset(&args, 0, sizeof(ide_task_t)); - if (ide_id_has_flush_cache_ext(drive->id)) - args.tf.command = WIN_FLUSH_CACHE_EXT; + if (ata_id_flush_ext_enabled(drive->id)) + args.tf.command = ATA_CMD_FLUSH_EXT; else - args.tf.command = WIN_FLUSH_CACHE; + args.tf.command = ATA_CMD_FLUSH; args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; return ide_no_data_taskfile(drive, &args); } +ide_devset_get(acoustic, acoustic); + static int set_acoustic(ide_drive_t *drive, int arg) { - ide_task_t args; - if (arg < 0 || arg > 254) return -EINVAL; - memset(&args, 0, sizeof(ide_task_t)); - args.tf.feature = arg ? SETFEATURES_EN_AAM : SETFEATURES_DIS_AAM; - args.tf.nsect = arg; - args.tf.command = WIN_SETFEATURES; - args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; - ide_no_data_taskfile(drive, &args); + ide_do_setfeature(drive, + arg ? SETFEATURES_AAM_ON : SETFEATURES_AAM_OFF, arg); + drive->acoustic = arg; + return 0; } +ide_devset_get_flag(addressing, IDE_DFLAG_LBA48); + /* * drive->addressing: * 0: 28-bit * 1: 48-bit * 2: 48-bit capable doing 28-bit */ -static int set_lba_addressing(ide_drive_t *drive, int arg) +static int set_addressing(ide_drive_t *drive, int arg) { if (arg < 0 || arg > 2) return -EINVAL; - drive->addressing = 0; + if (arg && ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48) || + ata_id_lba48_enabled(drive->id) == 0)) + return -EIO; - if (drive->hwif->host_flags & IDE_HFLAG_NO_LBA48) - return 0; + if (arg == 2) + arg = 0; + + if (arg) + drive->dev_flags |= IDE_DFLAG_LBA48; + else + drive->dev_flags &= ~IDE_DFLAG_LBA48; - if (!idedisk_supports_lba48(drive->id)) - return -EIO; - drive->addressing = arg; return 0; } -#ifdef CONFIG_IDE_PROC_FS -static void idedisk_add_settings(ide_drive_t *drive) -{ - struct hd_driveid *id = drive->id; - - ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 65535, 1, 1, - &drive->bios_cyl, NULL); - ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, - &drive->bios_head, NULL); - ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1, - &drive->bios_sect, NULL); - ide_add_setting(drive, "address", SETTING_RW, TYPE_BYTE, 0, 2, 1, 1, - &drive->addressing, set_lba_addressing); - ide_add_setting(drive, "multcount", SETTING_RW, TYPE_BYTE, 0, - id->max_multsect, 1, 1, &drive->mult_count, - set_multcount); - ide_add_setting(drive, "nowerr", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, - &drive->nowerr, set_nowerr); - ide_add_setting(drive, "lun", SETTING_RW, TYPE_INT, 0, 7, 1, 1, - &drive->lun, NULL); - ide_add_setting(drive, "wcache", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, - &drive->wcache, write_cache); - ide_add_setting(drive, "acoustic", SETTING_RW, TYPE_BYTE, 0, 254, 1, 1, - &drive->acoustic, set_acoustic); - ide_add_setting(drive, "failures", SETTING_RW, TYPE_INT, 0, 65535, 1, 1, - &drive->failures, NULL); - ide_add_setting(drive, "max_failures", SETTING_RW, TYPE_INT, 0, 65535, - 1, 1, &drive->max_failures, NULL); -} -#else -static inline void idedisk_add_settings(ide_drive_t *drive) { ; } -#endif +ide_ext_devset_rw(acoustic, acoustic); +ide_ext_devset_rw(address, addressing); +ide_ext_devset_rw(multcount, multcount); +ide_ext_devset_rw(wcache, wcache); + +ide_ext_devset_rw_sync(nowerr, nowerr); static void idedisk_setup(ide_drive_t *drive) { + struct ide_disk_obj *idkp = drive->driver_data; ide_hwif_t *hwif = drive->hwif; - struct hd_driveid *id = drive->id; + u16 *id = drive->id; + char *m = (char *)&id[ATA_ID_PROD]; unsigned long long capacity; - idedisk_add_settings(drive); + ide_proc_register_driver(drive, idkp->driver); - if (drive->id_read == 0) + if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) return; - if (drive->removable) { + if (drive->dev_flags & IDE_DFLAG_REMOVABLE) { /* * Removable disks (eg. SYQUEST); ignore 'WD' drives */ - if (id->model[0] != 'W' || id->model[1] != 'D') - drive->doorlocking = 1; + if (m[0] != 'W' || m[1] != 'D') + drive->dev_flags |= IDE_DFLAG_DOORLOCKING; } - (void)set_lba_addressing(drive, 1); + (void)set_addressing(drive, 1); - if (drive->addressing == 1) { + if (drive->dev_flags & IDE_DFLAG_LBA48) { int max_s = 2048; if (max_s > hwif->rqsize) @@ -823,7 +655,8 @@ static void idedisk_setup(ide_drive_t *drive) init_idedisk_capacity(drive); /* limit drive capacity to 137GB if LBA48 cannot be used */ - if (drive->addressing == 0 && drive->capacity64 > 1ULL << 28) { + if ((drive->dev_flags & IDE_DFLAG_LBA48) == 0 && + drive->capacity64 > 1ULL << 28) { printk(KERN_WARNING "%s: cannot use LBA48 - full capacity " "%llu sectors (%llu MB)\n", drive->name, (unsigned long long)drive->capacity64, @@ -831,24 +664,24 @@ static void idedisk_setup(ide_drive_t *drive) drive->capacity64 = 1ULL << 28; } - if ((hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && drive->addressing) { + if ((hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && + (drive->dev_flags & IDE_DFLAG_LBA48)) { if (drive->capacity64 > 1ULL << 28) { printk(KERN_INFO "%s: cannot use LBA48 DMA - PIO mode" " will be used for accessing sectors " "> %u\n", drive->name, 1 << 28); } else - drive->addressing = 0; + drive->dev_flags &= ~IDE_DFLAG_LBA48; } /* * if possible, give fdisk access to more of the drive, * by correcting bios_cyls: */ - capacity = idedisk_capacity(drive); - - if (!drive->forced_geom) { + capacity = ide_disk_capacity(drive); - if (idedisk_supports_lba48(drive->id)) { + if ((drive->dev_flags & IDE_DFLAG_FORCED_GEOM) == 0) { + if (ata_id_lba48_enabled(drive->id)) { /* compatibility */ drive->bios_sect = 63; drive->bios_head = 255; @@ -874,22 +707,23 @@ static void idedisk_setup(ide_drive_t *drive) drive->name, capacity, sectors_to_MB(capacity)); /* Only print cache size when it was specified */ - if (id->buf_size) - printk(KERN_CONT " w/%dKiB Cache", id->buf_size / 2); + if (id[ATA_ID_BUF_SIZE]) + printk(KERN_CONT " w/%dKiB Cache", id[ATA_ID_BUF_SIZE] / 2); printk(KERN_CONT ", CHS=%d/%d/%d\n", drive->bios_cyl, drive->bios_head, drive->bios_sect); /* write cache enabled? */ - if ((id->csfo & 1) || (id->cfs_enable_1 & (1 << 5))) - drive->wcache = 1; + if ((id[ATA_ID_CSFO] & 1) || ata_id_wcache_enabled(id)) + drive->dev_flags |= IDE_DFLAG_WCACHE; - write_cache(drive, 1); + set_wcache(drive, 1); } static void ide_cacheflush_p(ide_drive_t *drive) { - if (!drive->wcache || !ide_id_has_flush_cache(drive->id)) + if (ata_id_flush_enabled(drive->id) == 0 || + (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) return; if (do_idedisk_flushcache(drive)) @@ -931,7 +765,7 @@ static int ide_disk_probe(ide_drive_t *drive); */ static void ide_disk_resume(ide_drive_t *drive) { - if (idedisk_supports_hpa(drive->id)) + if (ata_id_hpa_enabled(drive->id)) init_idedisk_capacity(drive); } @@ -973,13 +807,12 @@ static ide_driver_t idedisk_driver = { .resume = ide_disk_resume, .shutdown = ide_device_shutdown, .version = IDEDISK_VERSION, - .media = ide_disk, - .supports_dsc_overlap = 0, .do_request = ide_do_rw_disk, .end_request = ide_end_request, .error = __ide_error, #ifdef CONFIG_IDE_PROC_FS - .proc = idedisk_proc, + .proc = ide_disk_proc, + .settings = ide_disk_settings, #endif }; @@ -988,7 +821,7 @@ static int idedisk_set_doorlock(ide_drive_t *drive, int on) ide_task_t task; memset(&task, 0, sizeof(task)); - task.tf.command = on ? WIN_DOORLOCK : WIN_DOORUNLOCK; + task.tf.command = on ? ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK; task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; return ide_no_data_taskfile(drive, &task); @@ -1008,15 +841,16 @@ static int idedisk_open(struct inode *inode, struct file *filp) idkp->openers++; - if (drive->removable && idkp->openers == 1) { + if ((drive->dev_flags & IDE_DFLAG_REMOVABLE) && idkp->openers == 1) { check_disk_change(inode->i_bdev); /* * Ignore the return code from door_lock, * since the open() has already succeeded, * and the door_lock is irrelevant at this point. */ - if (drive->doorlocking && idedisk_set_doorlock(drive, 1)) - drive->doorlocking = 0; + if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) && + idedisk_set_doorlock(drive, 1)) + drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING; } return 0; } @@ -1030,9 +864,10 @@ static int idedisk_release(struct inode *inode, struct file *filp) if (idkp->openers == 1) ide_cacheflush_p(drive); - if (drive->removable && idkp->openers == 1) { - if (drive->doorlocking && idedisk_set_doorlock(drive, 0)) - drive->doorlocking = 0; + if ((drive->dev_flags & IDE_DFLAG_REMOVABLE) && idkp->openers == 1) { + if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) && + idedisk_set_doorlock(drive, 0)) + drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING; } idkp->openers--; @@ -1053,72 +888,25 @@ static int idedisk_getgeo(struct block_device *bdev, struct hd_geometry *geo) return 0; } -static int idedisk_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) -{ - unsigned long flags; - struct block_device *bdev = inode->i_bdev; - struct ide_disk_obj *idkp = ide_disk_g(bdev->bd_disk); - ide_drive_t *drive = idkp->drive; - int err, (*setfunc)(ide_drive_t *, int); - u8 *val; - - switch (cmd) { - case HDIO_GET_ADDRESS: val = &drive->addressing; goto read_val; - case HDIO_GET_MULTCOUNT: val = &drive->mult_count; goto read_val; - case HDIO_GET_NOWERR: val = &drive->nowerr; goto read_val; - case HDIO_GET_WCACHE: val = &drive->wcache; goto read_val; - case HDIO_GET_ACOUSTIC: val = &drive->acoustic; goto read_val; - case HDIO_SET_ADDRESS: setfunc = set_lba_addressing; goto set_val; - case HDIO_SET_MULTCOUNT: setfunc = set_multcount; goto set_val; - case HDIO_SET_NOWERR: setfunc = set_nowerr; goto set_val; - case HDIO_SET_WCACHE: setfunc = write_cache; goto set_val; - case HDIO_SET_ACOUSTIC: setfunc = set_acoustic; goto set_val; - } - - return generic_ide_ioctl(drive, file, bdev, cmd, arg); - -read_val: - mutex_lock(&ide_setting_mtx); - spin_lock_irqsave(&ide_lock, flags); - err = *val; - spin_unlock_irqrestore(&ide_lock, flags); - mutex_unlock(&ide_setting_mtx); - return err >= 0 ? put_user(err, (long __user *)arg) : err; - -set_val: - if (bdev != bdev->bd_contains) - err = -EINVAL; - else { - if (!capable(CAP_SYS_ADMIN)) - err = -EACCES; - else { - mutex_lock(&ide_setting_mtx); - err = setfunc(drive, arg); - mutex_unlock(&ide_setting_mtx); - } - } - return err; -} - static int idedisk_media_changed(struct gendisk *disk) { struct ide_disk_obj *idkp = ide_disk_g(disk); ide_drive_t *drive = idkp->drive; /* do not scan partitions twice if this is a removable device */ - if (drive->attach) { - drive->attach = 0; + if (drive->dev_flags & IDE_DFLAG_ATTACH) { + drive->dev_flags &= ~IDE_DFLAG_ATTACH; return 0; } + /* if removable, always assume it was changed */ - return drive->removable; + return !!(drive->dev_flags & IDE_DFLAG_REMOVABLE); } static int idedisk_revalidate_disk(struct gendisk *disk) { struct ide_disk_obj *idkp = ide_disk_g(disk); - set_capacity(disk, idedisk_capacity(idkp->drive)); + set_capacity(disk, ide_disk_capacity(idkp->drive)); return 0; } @@ -1126,7 +914,7 @@ static struct block_device_operations idedisk_ops = { .owner = THIS_MODULE, .open = idedisk_open, .release = idedisk_release, - .ioctl = idedisk_ioctl, + .ioctl = ide_disk_ioctl, .getgeo = idedisk_getgeo, .media_changed = idedisk_media_changed, .revalidate_disk = idedisk_revalidate_disk @@ -1142,8 +930,7 @@ static int ide_disk_probe(ide_drive_t *drive) /* strstr("foo", "") is non-NULL */ if (!strstr("ide-disk", drive->driver_req)) goto failed; - if (!drive->present) - goto failed; + if (drive->media != ide_disk) goto failed; @@ -1151,15 +938,12 @@ static int ide_disk_probe(ide_drive_t *drive) if (!idkp) goto failed; - g = alloc_disk_node(1 << PARTN_BITS, - hwif_to_node(drive->hwif)); + g = alloc_disk_node(IDE_DISK_MINORS, hwif_to_node(drive->hwif)); if (!g) goto out_free_idkp; ide_init_disk(g, drive); - ide_proc_register_driver(drive, &idedisk_driver); - kref_init(&idkp->kref); idkp->drive = drive; @@ -1171,17 +955,20 @@ static int ide_disk_probe(ide_drive_t *drive) drive->driver_data = idkp; idedisk_setup(drive); - if ((!drive->head || drive->head > 16) && !drive->select.b.lba) { + if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 && + (drive->head == 0 || drive->head > 16)) { printk(KERN_ERR "%s: INVALID GEOMETRY: %d PHYSICAL HEADS?\n", drive->name, drive->head); - drive->attach = 0; + drive->dev_flags &= ~IDE_DFLAG_ATTACH; } else - drive->attach = 1; + drive->dev_flags |= IDE_DFLAG_ATTACH; - g->minors = 1 << PARTN_BITS; + g->minors = IDE_DISK_MINORS; g->driverfs_dev = &drive->gendev; - g->flags = drive->removable ? GENHD_FL_REMOVABLE : 0; - set_capacity(g, idedisk_capacity(drive)); + g->flags |= GENHD_FL_EXT_DEVT; + if (drive->dev_flags & IDE_DFLAG_REMOVABLE) + g->flags = GENHD_FL_REMOVABLE; + set_capacity(g, ide_disk_capacity(drive)); g->fops = &idedisk_ops; add_disk(g); return 0; @@ -1203,6 +990,7 @@ static int __init idedisk_init(void) } MODULE_ALIAS("ide:*m-disk*"); +MODULE_ALIAS("ide-disk"); module_init(idedisk_init); module_exit(idedisk_exit); MODULE_LICENSE("GPL"); diff --git a/drivers/ide/ide-disk.h b/drivers/ide/ide-disk.h new file mode 100644 index 00000000000..a82fa435566 --- /dev/null +++ b/drivers/ide/ide-disk.h @@ -0,0 +1,32 @@ +#ifndef __IDE_DISK_H +#define __IDE_DISK_H + +struct ide_disk_obj { + ide_drive_t *drive; + ide_driver_t *driver; + struct gendisk *disk; + struct kref kref; + unsigned int openers; /* protected by BKL for now */ +}; + +#define ide_disk_g(disk) \ + container_of((disk)->private_data, struct ide_disk_obj, driver) + +/* ide-disk.c */ +sector_t ide_disk_capacity(ide_drive_t *); +ide_decl_devset(address); +ide_decl_devset(multcount); +ide_decl_devset(nowerr); +ide_decl_devset(wcache); +ide_decl_devset(acoustic); + +/* ide-disk_ioctl.c */ +int ide_disk_ioctl(struct inode *, struct file *, unsigned int, unsigned long); + +#ifdef CONFIG_IDE_PROC_FS +/* ide-disk_proc.c */ +extern ide_proc_entry_t ide_disk_proc[]; +extern const struct ide_proc_devset ide_disk_settings[]; +#endif + +#endif /* __IDE_DISK_H */ diff --git a/drivers/ide/ide-disk_ioctl.c b/drivers/ide/ide-disk_ioctl.c new file mode 100644 index 00000000000..a6cf1a03a80 --- /dev/null +++ b/drivers/ide/ide-disk_ioctl.c @@ -0,0 +1,29 @@ +#include <linux/kernel.h> +#include <linux/ide.h> +#include <linux/hdreg.h> + +#include "ide-disk.h" + +static const struct ide_ioctl_devset ide_disk_ioctl_settings[] = { +{ HDIO_GET_ADDRESS, HDIO_SET_ADDRESS, &ide_devset_address }, +{ HDIO_GET_MULTCOUNT, HDIO_SET_MULTCOUNT, &ide_devset_multcount }, +{ HDIO_GET_NOWERR, HDIO_SET_NOWERR, &ide_devset_nowerr }, +{ HDIO_GET_WCACHE, HDIO_SET_WCACHE, &ide_devset_wcache }, +{ HDIO_GET_ACOUSTIC, HDIO_SET_ACOUSTIC, &ide_devset_acoustic }, +{ 0 } +}; + +int ide_disk_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct block_device *bdev = inode->i_bdev; + struct ide_disk_obj *idkp = ide_disk_g(bdev->bd_disk); + ide_drive_t *drive = idkp->drive; + int err; + + err = ide_setting_ioctl(drive, bdev, cmd, arg, ide_disk_ioctl_settings); + if (err != -EOPNOTSUPP) + return err; + + return generic_ide_ioctl(drive, file, bdev, cmd, arg); +} diff --git a/drivers/ide/ide-disk_proc.c b/drivers/ide/ide-disk_proc.c new file mode 100644 index 00000000000..4724976afe7 --- /dev/null +++ b/drivers/ide/ide-disk_proc.c @@ -0,0 +1,129 @@ +#include <linux/kernel.h> +#include <linux/ide.h> +#include <linux/hdreg.h> + +#include "ide-disk.h" + +static int smart_enable(ide_drive_t *drive) +{ + ide_task_t args; + struct ide_taskfile *tf = &args.tf; + + memset(&args, 0, sizeof(ide_task_t)); + tf->feature = ATA_SMART_ENABLE; + tf->lbam = ATA_SMART_LBAM_PASS; + tf->lbah = ATA_SMART_LBAH_PASS; + tf->command = ATA_CMD_SMART; + args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + return ide_no_data_taskfile(drive, &args); +} + +static int get_smart_data(ide_drive_t *drive, u8 *buf, u8 sub_cmd) +{ + ide_task_t args; + struct ide_taskfile *tf = &args.tf; + + memset(&args, 0, sizeof(ide_task_t)); + tf->feature = sub_cmd; + tf->nsect = 0x01; + tf->lbam = ATA_SMART_LBAM_PASS; + tf->lbah = ATA_SMART_LBAH_PASS; + tf->command = ATA_CMD_SMART; + args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + args.data_phase = TASKFILE_IN; + (void) smart_enable(drive); + return ide_raw_taskfile(drive, &args, buf, 1); +} + +static int proc_idedisk_read_cache + (char *page, char **start, off_t off, int count, int *eof, void *data) +{ + ide_drive_t *drive = (ide_drive_t *) data; + char *out = page; + int len; + + if (drive->dev_flags & IDE_DFLAG_ID_READ) + len = sprintf(out, "%i\n", drive->id[ATA_ID_BUF_SIZE] / 2); + else + len = sprintf(out, "(none)\n"); + + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); +} + +static int proc_idedisk_read_capacity + (char *page, char **start, off_t off, int count, int *eof, void *data) +{ + ide_drive_t*drive = (ide_drive_t *)data; + int len; + + len = sprintf(page, "%llu\n", (long long)ide_disk_capacity(drive)); + + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); +} + +static int proc_idedisk_read_smart(char *page, char **start, off_t off, + int count, int *eof, void *data, u8 sub_cmd) +{ + ide_drive_t *drive = (ide_drive_t *)data; + int len = 0, i = 0; + + if (get_smart_data(drive, page, sub_cmd) == 0) { + unsigned short *val = (unsigned short *) page; + char *out = (char *)val + SECTOR_SIZE; + + page = out; + do { + out += sprintf(out, "%04x%c", le16_to_cpu(*val), + (++i & 7) ? ' ' : '\n'); + val += 1; + } while (i < SECTOR_SIZE / 2); + len = out - page; + } + + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); +} + +static int proc_idedisk_read_sv + (char *page, char **start, off_t off, int count, int *eof, void *data) +{ + return proc_idedisk_read_smart(page, start, off, count, eof, data, + ATA_SMART_READ_VALUES); +} + +static int proc_idedisk_read_st + (char *page, char **start, off_t off, int count, int *eof, void *data) +{ + return proc_idedisk_read_smart(page, start, off, count, eof, data, + ATA_SMART_READ_THRESHOLDS); +} + +ide_proc_entry_t ide_disk_proc[] = { + { "cache", S_IFREG|S_IRUGO, proc_idedisk_read_cache, NULL }, + { "capacity", S_IFREG|S_IRUGO, proc_idedisk_read_capacity, NULL }, + { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL }, + { "smart_values", S_IFREG|S_IRUSR, proc_idedisk_read_sv, NULL }, + { "smart_thresholds", S_IFREG|S_IRUSR, proc_idedisk_read_st, NULL }, + { NULL, 0, NULL, NULL } +}; + +ide_devset_rw_field(bios_cyl, bios_cyl); +ide_devset_rw_field(bios_head, bios_head); +ide_devset_rw_field(bios_sect, bios_sect); +ide_devset_rw_field(failures, failures); +ide_devset_rw_field(lun, lun); +ide_devset_rw_field(max_failures, max_failures); + +const struct ide_proc_devset ide_disk_settings[] = { + IDE_PROC_DEVSET(acoustic, 0, 254), + IDE_PROC_DEVSET(address, 0, 2), + IDE_PROC_DEVSET(bios_cyl, 0, 65535), + IDE_PROC_DEVSET(bios_head, 0, 255), + IDE_PROC_DEVSET(bios_sect, 0, 63), + IDE_PROC_DEVSET(failures, 0, 65535), + IDE_PROC_DEVSET(lun, 0, 7), + IDE_PROC_DEVSET(max_failures, 0, 65535), + IDE_PROC_DEVSET(multcount, 0, 16), + IDE_PROC_DEVSET(nowerr, 0, 1), + IDE_PROC_DEVSET(wcache, 0, 1), + { 0 }, +}; diff --git a/drivers/ide/ide-dma-sff.c b/drivers/ide/ide-dma-sff.c new file mode 100644 index 00000000000..0903782689e --- /dev/null +++ b/drivers/ide/ide-dma-sff.c @@ -0,0 +1,356 @@ +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/ide.h> +#include <linux/scatterlist.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> + +/** + * config_drive_for_dma - attempt to activate IDE DMA + * @drive: the drive to place in DMA mode + * + * If the drive supports at least mode 2 DMA or UDMA of any kind + * then attempt to place it into DMA mode. Drives that are known to + * support DMA but predate the DMA properties or that are known + * to have DMA handling bugs are also set up appropriately based + * on the good/bad drive lists. + */ + +int config_drive_for_dma(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + u16 *id = drive->id; + + if (drive->media != ide_disk) { + if (hwif->host_flags & IDE_HFLAG_NO_ATAPI_DMA) + return 0; + } + + /* + * Enable DMA on any drive that has + * UltraDMA (mode 0/1/2/3/4/5/6) enabled + */ + if ((id[ATA_ID_FIELD_VALID] & 4) && + ((id[ATA_ID_UDMA_MODES] >> 8) & 0x7f)) + return 1; + + /* + * Enable DMA on any drive that has mode2 DMA + * (multi or single) enabled + */ + if (id[ATA_ID_FIELD_VALID] & 2) /* regular DMA */ + if ((id[ATA_ID_MWDMA_MODES] & 0x404) == 0x404 || + (id[ATA_ID_SWDMA_MODES] & 0x404) == 0x404) + return 1; + + /* Consult the list of known "good" drives */ + if (ide_dma_good_drive(drive)) + return 1; + + return 0; +} + +/** + * ide_dma_host_set - Enable/disable DMA on a host + * @drive: drive to control + * + * Enable/disable DMA on an IDE controller following generic + * bus-mastering IDE controller behaviour. + */ + +void ide_dma_host_set(ide_drive_t *drive, int on) +{ + ide_hwif_t *hwif = drive->hwif; + u8 unit = drive->dn & 1; + u8 dma_stat = hwif->tp_ops->read_sff_dma_status(hwif); + + if (on) + dma_stat |= (1 << (5 + unit)); + else + dma_stat &= ~(1 << (5 + unit)); + + if (hwif->host_flags & IDE_HFLAG_MMIO) + writeb(dma_stat, + (void __iomem *)(hwif->dma_base + ATA_DMA_STATUS)); + else + outb(dma_stat, hwif->dma_base + ATA_DMA_STATUS); +} +EXPORT_SYMBOL_GPL(ide_dma_host_set); + +/** + * ide_build_dmatable - build IDE DMA table + * + * ide_build_dmatable() prepares a dma request. We map the command + * to get the pci bus addresses of the buffers and then build up + * the PRD table that the IDE layer wants to be fed. + * + * Most chipsets correctly interpret a length of 0x0000 as 64KB, + * but at least one (e.g. CS5530) misinterprets it as zero (!). + * So we break the 64KB entry into two 32KB entries instead. + * + * Returns the number of built PRD entries if all went okay, + * returns 0 otherwise. + * + * May also be invoked from trm290.c + */ + +int ide_build_dmatable(ide_drive_t *drive, struct request *rq) +{ + ide_hwif_t *hwif = drive->hwif; + __le32 *table = (__le32 *)hwif->dmatable_cpu; + unsigned int is_trm290 = (hwif->chipset == ide_trm290) ? 1 : 0; + unsigned int count = 0; + int i; + struct scatterlist *sg; + + hwif->sg_nents = ide_build_sglist(drive, rq); + if (hwif->sg_nents == 0) + return 0; + + for_each_sg(hwif->sg_table, sg, hwif->sg_nents, i) { + u32 cur_addr, cur_len, xcount, bcount; + + cur_addr = sg_dma_address(sg); + cur_len = sg_dma_len(sg); + + /* + * Fill in the dma table, without crossing any 64kB boundaries. + * Most hardware requires 16-bit alignment of all blocks, + * but the trm290 requires 32-bit alignment. + */ + + while (cur_len) { + if (count++ >= PRD_ENTRIES) + goto use_pio_instead; + + bcount = 0x10000 - (cur_addr & 0xffff); + if (bcount > cur_len) + bcount = cur_len; + *table++ = cpu_to_le32(cur_addr); + xcount = bcount & 0xffff; + if (is_trm290) + xcount = ((xcount >> 2) - 1) << 16; + if (xcount == 0x0000) { + if (count++ >= PRD_ENTRIES) + goto use_pio_instead; + *table++ = cpu_to_le32(0x8000); + *table++ = cpu_to_le32(cur_addr + 0x8000); + xcount = 0x8000; + } + *table++ = cpu_to_le32(xcount); + cur_addr += bcount; + cur_len -= bcount; + } + } + + if (count) { + if (!is_trm290) + *--table |= cpu_to_le32(0x80000000); + return count; + } + +use_pio_instead: + printk(KERN_ERR "%s: %s\n", drive->name, + count ? "DMA table too small" : "empty DMA table?"); + + ide_destroy_dmatable(drive); + + return 0; /* revert to PIO for this request */ +} +EXPORT_SYMBOL_GPL(ide_build_dmatable); + +/** + * ide_dma_setup - begin a DMA phase + * @drive: target device + * + * Build an IDE DMA PRD (IDE speak for scatter gather table) + * and then set up the DMA transfer registers for a device + * that follows generic IDE PCI DMA behaviour. Controllers can + * override this function if they need to + * + * Returns 0 on success. If a PIO fallback is required then 1 + * is returned. + */ + +int ide_dma_setup(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + struct request *rq = hwif->hwgroup->rq; + unsigned int reading; + u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; + u8 dma_stat; + + if (rq_data_dir(rq)) + reading = 0; + else + reading = 1 << 3; + + /* fall back to pio! */ + if (!ide_build_dmatable(drive, rq)) { + ide_map_sg(drive, rq); + return 1; + } + + /* PRD table */ + if (hwif->host_flags & IDE_HFLAG_MMIO) + writel(hwif->dmatable_dma, + (void __iomem *)(hwif->dma_base + ATA_DMA_TABLE_OFS)); + else + outl(hwif->dmatable_dma, hwif->dma_base + ATA_DMA_TABLE_OFS); + + /* specify r/w */ + if (mmio) + writeb(reading, (void __iomem *)(hwif->dma_base + ATA_DMA_CMD)); + else + outb(reading, hwif->dma_base + ATA_DMA_CMD); + + /* read DMA status for INTR & ERROR flags */ + dma_stat = hwif->tp_ops->read_sff_dma_status(hwif); + + /* clear INTR & ERROR flags */ + if (mmio) + writeb(dma_stat | 6, + (void __iomem *)(hwif->dma_base + ATA_DMA_STATUS)); + else + outb(dma_stat | 6, hwif->dma_base + ATA_DMA_STATUS); + + drive->waiting_for_dma = 1; + return 0; +} +EXPORT_SYMBOL_GPL(ide_dma_setup); + +/** + * dma_timer_expiry - handle a DMA timeout + * @drive: Drive that timed out + * + * An IDE DMA transfer timed out. In the event of an error we ask + * the driver to resolve the problem, if a DMA transfer is still + * in progress we continue to wait (arguably we need to add a + * secondary 'I don't care what the drive thinks' timeout here) + * Finally if we have an interrupt we let it complete the I/O. + * But only one time - we clear expiry and if it's still not + * completed after WAIT_CMD, we error and retry in PIO. + * This can occur if an interrupt is lost or due to hang or bugs. + */ + +static int dma_timer_expiry(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + u8 dma_stat = hwif->tp_ops->read_sff_dma_status(hwif); + + printk(KERN_WARNING "%s: %s: DMA status (0x%02x)\n", + drive->name, __func__, dma_stat); + + if ((dma_stat & 0x18) == 0x18) /* BUSY Stupid Early Timer !! */ + return WAIT_CMD; + + hwif->hwgroup->expiry = NULL; /* one free ride for now */ + + /* 1 dmaing, 2 error, 4 intr */ + if (dma_stat & 2) /* ERROR */ + return -1; + + if (dma_stat & 1) /* DMAing */ + return WAIT_CMD; + + if (dma_stat & 4) /* Got an Interrupt */ + return WAIT_CMD; + + return 0; /* Status is unknown -- reset the bus */ +} + +void ide_dma_exec_cmd(ide_drive_t *drive, u8 command) +{ + /* issue cmd to drive */ + ide_execute_command(drive, command, &ide_dma_intr, 2 * WAIT_CMD, + dma_timer_expiry); +} +EXPORT_SYMBOL_GPL(ide_dma_exec_cmd); + +void ide_dma_start(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + u8 dma_cmd; + + /* Note that this is done *after* the cmd has + * been issued to the drive, as per the BM-IDE spec. + * The Promise Ultra33 doesn't work correctly when + * we do this part before issuing the drive cmd. + */ + if (hwif->host_flags & IDE_HFLAG_MMIO) { + dma_cmd = readb((void __iomem *)(hwif->dma_base + ATA_DMA_CMD)); + /* start DMA */ + writeb(dma_cmd | 1, + (void __iomem *)(hwif->dma_base + ATA_DMA_CMD)); + } else { + dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD); + outb(dma_cmd | 1, hwif->dma_base + ATA_DMA_CMD); + } + + wmb(); +} +EXPORT_SYMBOL_GPL(ide_dma_start); + +/* returns 1 on error, 0 otherwise */ +int ide_dma_end(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; + u8 dma_stat = 0, dma_cmd = 0; + + drive->waiting_for_dma = 0; + + if (mmio) { + /* get DMA command mode */ + dma_cmd = readb((void __iomem *)(hwif->dma_base + ATA_DMA_CMD)); + /* stop DMA */ + writeb(dma_cmd & ~1, + (void __iomem *)(hwif->dma_base + ATA_DMA_CMD)); + } else { + dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD); + outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD); + } + + /* get DMA status */ + dma_stat = hwif->tp_ops->read_sff_dma_status(hwif); + + if (mmio) + /* clear the INTR & ERROR bits */ + writeb(dma_stat | 6, + (void __iomem *)(hwif->dma_base + ATA_DMA_STATUS)); + else + outb(dma_stat | 6, hwif->dma_base + ATA_DMA_STATUS); + + /* purge DMA mappings */ + ide_destroy_dmatable(drive); + /* verify good DMA status */ + wmb(); + return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0; +} +EXPORT_SYMBOL_GPL(ide_dma_end); + +/* returns 1 if dma irq issued, 0 otherwise */ +int ide_dma_test_irq(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + u8 dma_stat = hwif->tp_ops->read_sff_dma_status(hwif); + + /* return 1 if INTR asserted */ + if ((dma_stat & 4) == 4) + return 1; + + return 0; +} +EXPORT_SYMBOL_GPL(ide_dma_test_irq); + +const struct ide_dma_ops sff_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = ide_dma_start, + .dma_end = ide_dma_end, + .dma_test_irq = ide_dma_test_irq, + .dma_timeout = ide_dma_timeout, + .dma_lost_irq = ide_dma_lost_irq, +}; +EXPORT_SYMBOL_GPL(sff_dma_ops); diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index adc68275585..fffd11717b2 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -28,24 +28,13 @@ * for supplying a Promise UDMA board & WD UDMA drive for this work! */ -#include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> -#include <linux/timer.h> -#include <linux/mm.h> -#include <linux/interrupt.h> -#include <linux/pci.h> -#include <linux/init.h> #include <linux/ide.h> -#include <linux/delay.h> #include <linux/scatterlist.h> #include <linux/dma-mapping.h> -#include <asm/io.h> -#include <asm/irq.h> - -static const struct drive_list_entry drive_whitelist [] = { - +static const struct drive_list_entry drive_whitelist[] = { { "Micropolis 2112A" , NULL }, { "CONNER CTMA 4000" , NULL }, { "CONNER CTT8000-A" , NULL }, @@ -53,8 +42,7 @@ static const struct drive_list_entry drive_whitelist [] = { { NULL , NULL } }; -static const struct drive_list_entry drive_blacklist [] = { - +static const struct drive_list_entry drive_blacklist[] = { { "WDC AC11000H" , NULL }, { "WDC AC22100H" , NULL }, { "WDC AC32500H" , NULL }, @@ -94,11 +82,11 @@ static const struct drive_list_entry drive_blacklist [] = { * ide_dma_intr - IDE DMA interrupt handler * @drive: the drive the interrupt is for * - * Handle an interrupt completing a read/write DMA transfer on an + * Handle an interrupt completing a read/write DMA transfer on an * IDE device */ - -ide_startstop_t ide_dma_intr (ide_drive_t *drive) + +ide_startstop_t ide_dma_intr(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; u8 stat = 0, dma_stat = 0; @@ -106,22 +94,21 @@ ide_startstop_t ide_dma_intr (ide_drive_t *drive) dma_stat = hwif->dma_ops->dma_end(drive); stat = hwif->tp_ops->read_status(hwif); - if (OK_STAT(stat,DRIVE_READY,drive->bad_wstat|DRQ_STAT)) { + if (OK_STAT(stat, DRIVE_READY, drive->bad_wstat | ATA_DRQ)) { if (!dma_stat) { - struct request *rq = HWGROUP(drive)->rq; + struct request *rq = hwif->hwgroup->rq; task_end_request(drive, rq, stat); return ide_stopped; } - printk(KERN_ERR "%s: dma_intr: bad DMA status (dma_stat=%x)\n", - drive->name, dma_stat); + printk(KERN_ERR "%s: %s: bad DMA status (0x%02x)\n", + drive->name, __func__, dma_stat); } return ide_error(drive, "dma_intr", stat); } - EXPORT_SYMBOL_GPL(ide_dma_intr); -static int ide_dma_good_drive(ide_drive_t *drive) +int ide_dma_good_drive(ide_drive_t *drive) { return ide_in_drive_list(drive->id, drive_whitelist); } @@ -139,7 +126,7 @@ static int ide_dma_good_drive(ide_drive_t *drive) int ide_build_sglist(ide_drive_t *drive, struct request *rq) { - ide_hwif_t *hwif = HWIF(drive); + ide_hwif_t *hwif = drive->hwif; struct scatterlist *sg = hwif->sg_table; ide_map_sg(drive, rq); @@ -152,106 +139,8 @@ int ide_build_sglist(ide_drive_t *drive, struct request *rq) return dma_map_sg(hwif->dev, sg, hwif->sg_nents, hwif->sg_dma_direction); } - EXPORT_SYMBOL_GPL(ide_build_sglist); -#ifdef CONFIG_BLK_DEV_IDEDMA_SFF -/** - * ide_build_dmatable - build IDE DMA table - * - * ide_build_dmatable() prepares a dma request. We map the command - * to get the pci bus addresses of the buffers and then build up - * the PRD table that the IDE layer wants to be fed. The code - * knows about the 64K wrap bug in the CS5530. - * - * Returns the number of built PRD entries if all went okay, - * returns 0 otherwise. - * - * May also be invoked from trm290.c - */ - -int ide_build_dmatable (ide_drive_t *drive, struct request *rq) -{ - ide_hwif_t *hwif = HWIF(drive); - __le32 *table = (__le32 *)hwif->dmatable_cpu; - unsigned int is_trm290 = (hwif->chipset == ide_trm290) ? 1 : 0; - unsigned int count = 0; - int i; - struct scatterlist *sg; - - hwif->sg_nents = i = ide_build_sglist(drive, rq); - - if (!i) - return 0; - - sg = hwif->sg_table; - while (i) { - u32 cur_addr; - u32 cur_len; - - cur_addr = sg_dma_address(sg); - cur_len = sg_dma_len(sg); - - /* - * Fill in the dma table, without crossing any 64kB boundaries. - * Most hardware requires 16-bit alignment of all blocks, - * but the trm290 requires 32-bit alignment. - */ - - while (cur_len) { - if (count++ >= PRD_ENTRIES) { - printk(KERN_ERR "%s: DMA table too small\n", drive->name); - goto use_pio_instead; - } else { - u32 xcount, bcount = 0x10000 - (cur_addr & 0xffff); - - if (bcount > cur_len) - bcount = cur_len; - *table++ = cpu_to_le32(cur_addr); - xcount = bcount & 0xffff; - if (is_trm290) - xcount = ((xcount >> 2) - 1) << 16; - if (xcount == 0x0000) { - /* - * Most chipsets correctly interpret a length of 0x0000 as 64KB, - * but at least one (e.g. CS5530) misinterprets it as zero (!). - * So here we break the 64KB entry into two 32KB entries instead. - */ - if (count++ >= PRD_ENTRIES) { - printk(KERN_ERR "%s: DMA table too small\n", drive->name); - goto use_pio_instead; - } - *table++ = cpu_to_le32(0x8000); - *table++ = cpu_to_le32(cur_addr + 0x8000); - xcount = 0x8000; - } - *table++ = cpu_to_le32(xcount); - cur_addr += bcount; - cur_len -= bcount; - } - } - - sg = sg_next(sg); - i--; - } - - if (count) { - if (!is_trm290) - *--table |= cpu_to_le32(0x80000000); - return count; - } - - printk(KERN_ERR "%s: empty DMA table?\n", drive->name); - -use_pio_instead: - ide_destroy_dmatable(drive); - - return 0; /* revert to PIO for this request */ -} - -EXPORT_SYMBOL_GPL(ide_build_dmatable); -#endif - /** * ide_destroy_dmatable - clean up DMA mapping * @drive: The drive to unmap @@ -262,146 +151,30 @@ EXPORT_SYMBOL_GPL(ide_build_dmatable); * an oops as only one mapping can be live for each target at a given * time. */ - -void ide_destroy_dmatable (ide_drive_t *drive) + +void ide_destroy_dmatable(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; dma_unmap_sg(hwif->dev, hwif->sg_table, hwif->sg_nents, hwif->sg_dma_direction); } - EXPORT_SYMBOL_GPL(ide_destroy_dmatable); -#ifdef CONFIG_BLK_DEV_IDEDMA_SFF -/** - * config_drive_for_dma - attempt to activate IDE DMA - * @drive: the drive to place in DMA mode - * - * If the drive supports at least mode 2 DMA or UDMA of any kind - * then attempt to place it into DMA mode. Drives that are known to - * support DMA but predate the DMA properties or that are known - * to have DMA handling bugs are also set up appropriately based - * on the good/bad drive lists. - */ - -static int config_drive_for_dma (ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - struct hd_driveid *id = drive->id; - - if (drive->media != ide_disk) { - if (hwif->host_flags & IDE_HFLAG_NO_ATAPI_DMA) - return 0; - } - - /* - * Enable DMA on any drive that has - * UltraDMA (mode 0/1/2/3/4/5/6) enabled - */ - if ((id->field_valid & 4) && ((id->dma_ultra >> 8) & 0x7f)) - return 1; - - /* - * Enable DMA on any drive that has mode2 DMA - * (multi or single) enabled - */ - if (id->field_valid & 2) /* regular DMA */ - if ((id->dma_mword & 0x404) == 0x404 || - (id->dma_1word & 0x404) == 0x404) - return 1; - - /* Consult the list of known "good" drives */ - if (ide_dma_good_drive(drive)) - return 1; - - return 0; -} - -/** - * dma_timer_expiry - handle a DMA timeout - * @drive: Drive that timed out - * - * An IDE DMA transfer timed out. In the event of an error we ask - * the driver to resolve the problem, if a DMA transfer is still - * in progress we continue to wait (arguably we need to add a - * secondary 'I don't care what the drive thinks' timeout here) - * Finally if we have an interrupt we let it complete the I/O. - * But only one time - we clear expiry and if it's still not - * completed after WAIT_CMD, we error and retry in PIO. - * This can occur if an interrupt is lost or due to hang or bugs. - */ - -static int dma_timer_expiry (ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - u8 dma_stat = hwif->tp_ops->read_sff_dma_status(hwif); - - printk(KERN_WARNING "%s: dma_timer_expiry: dma status == 0x%02x\n", - drive->name, dma_stat); - - if ((dma_stat & 0x18) == 0x18) /* BUSY Stupid Early Timer !! */ - return WAIT_CMD; - - HWGROUP(drive)->expiry = NULL; /* one free ride for now */ - - /* 1 dmaing, 2 error, 4 intr */ - if (dma_stat & 2) /* ERROR */ - return -1; - - if (dma_stat & 1) /* DMAing */ - return WAIT_CMD; - - if (dma_stat & 4) /* Got an Interrupt */ - return WAIT_CMD; - - return 0; /* Status is unknown -- reset the bus */ -} - -/** - * ide_dma_host_set - Enable/disable DMA on a host - * @drive: drive to control - * - * Enable/disable DMA on an IDE controller following generic - * bus-mastering IDE controller behaviour. - */ - -void ide_dma_host_set(ide_drive_t *drive, int on) -{ - ide_hwif_t *hwif = HWIF(drive); - u8 unit = (drive->select.b.unit & 0x01); - u8 dma_stat = hwif->tp_ops->read_sff_dma_status(hwif); - - if (on) - dma_stat |= (1 << (5 + unit)); - else - dma_stat &= ~(1 << (5 + unit)); - - if (hwif->host_flags & IDE_HFLAG_MMIO) - writeb(dma_stat, - (void __iomem *)(hwif->dma_base + ATA_DMA_STATUS)); - else - outb(dma_stat, hwif->dma_base + ATA_DMA_STATUS); -} - -EXPORT_SYMBOL_GPL(ide_dma_host_set); -#endif /* CONFIG_BLK_DEV_IDEDMA_SFF */ - /** * ide_dma_off_quietly - Generic DMA kill * @drive: drive to control * - * Turn off the current DMA on this IDE controller. + * Turn off the current DMA on this IDE controller. */ void ide_dma_off_quietly(ide_drive_t *drive) { - drive->using_dma = 0; + drive->dev_flags &= ~IDE_DFLAG_USING_DMA; ide_toggle_bounce(drive, 0); drive->hwif->dma_ops->dma_host_set(drive, 0); } - EXPORT_SYMBOL(ide_dma_off_quietly); /** @@ -417,7 +190,6 @@ void ide_dma_off(ide_drive_t *drive) printk(KERN_INFO "%s: DMA disabled\n", drive->name); ide_dma_off_quietly(drive); } - EXPORT_SYMBOL(ide_dma_off); /** @@ -429,179 +201,24 @@ EXPORT_SYMBOL(ide_dma_off); void ide_dma_on(ide_drive_t *drive) { - drive->using_dma = 1; + drive->dev_flags |= IDE_DFLAG_USING_DMA; ide_toggle_bounce(drive, 1); drive->hwif->dma_ops->dma_host_set(drive, 1); } -#ifdef CONFIG_BLK_DEV_IDEDMA_SFF -/** - * ide_dma_setup - begin a DMA phase - * @drive: target device - * - * Build an IDE DMA PRD (IDE speak for scatter gather table) - * and then set up the DMA transfer registers for a device - * that follows generic IDE PCI DMA behaviour. Controllers can - * override this function if they need to - * - * Returns 0 on success. If a PIO fallback is required then 1 - * is returned. - */ - -int ide_dma_setup(ide_drive_t *drive) +int __ide_dma_bad_drive(ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; - struct request *rq = HWGROUP(drive)->rq; - unsigned int reading; - u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; - u8 dma_stat; - - if (rq_data_dir(rq)) - reading = 0; - else - reading = 1 << 3; - - /* fall back to pio! */ - if (!ide_build_dmatable(drive, rq)) { - ide_map_sg(drive, rq); - return 1; - } - - /* PRD table */ - if (hwif->host_flags & IDE_HFLAG_MMIO) - writel(hwif->dmatable_dma, - (void __iomem *)(hwif->dma_base + ATA_DMA_TABLE_OFS)); - else - outl(hwif->dmatable_dma, hwif->dma_base + ATA_DMA_TABLE_OFS); - - /* specify r/w */ - if (mmio) - writeb(reading, (void __iomem *)(hwif->dma_base + ATA_DMA_CMD)); - else - outb(reading, hwif->dma_base + ATA_DMA_CMD); - - /* read DMA status for INTR & ERROR flags */ - dma_stat = hwif->tp_ops->read_sff_dma_status(hwif); - - /* clear INTR & ERROR flags */ - if (mmio) - writeb(dma_stat | 6, - (void __iomem *)(hwif->dma_base + ATA_DMA_STATUS)); - else - outb(dma_stat | 6, hwif->dma_base + ATA_DMA_STATUS); - - drive->waiting_for_dma = 1; - return 0; -} - -EXPORT_SYMBOL_GPL(ide_dma_setup); - -void ide_dma_exec_cmd(ide_drive_t *drive, u8 command) -{ - /* issue cmd to drive */ - ide_execute_command(drive, command, &ide_dma_intr, 2*WAIT_CMD, dma_timer_expiry); -} -EXPORT_SYMBOL_GPL(ide_dma_exec_cmd); - -void ide_dma_start(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - u8 dma_cmd; - - /* Note that this is done *after* the cmd has - * been issued to the drive, as per the BM-IDE spec. - * The Promise Ultra33 doesn't work correctly when - * we do this part before issuing the drive cmd. - */ - if (hwif->host_flags & IDE_HFLAG_MMIO) { - dma_cmd = readb((void __iomem *)(hwif->dma_base + ATA_DMA_CMD)); - /* start DMA */ - writeb(dma_cmd | 1, - (void __iomem *)(hwif->dma_base + ATA_DMA_CMD)); - } else { - dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD); - outb(dma_cmd | 1, hwif->dma_base + ATA_DMA_CMD); - } - - hwif->dma = 1; - wmb(); -} - -EXPORT_SYMBOL_GPL(ide_dma_start); - -/* returns 1 on error, 0 otherwise */ -int __ide_dma_end (ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; - u8 dma_stat = 0, dma_cmd = 0; - - drive->waiting_for_dma = 0; - - if (mmio) { - /* get DMA command mode */ - dma_cmd = readb((void __iomem *)(hwif->dma_base + ATA_DMA_CMD)); - /* stop DMA */ - writeb(dma_cmd & ~1, - (void __iomem *)(hwif->dma_base + ATA_DMA_CMD)); - } else { - dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD); - outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD); - } - - /* get DMA status */ - dma_stat = hwif->tp_ops->read_sff_dma_status(hwif); - - if (mmio) - /* clear the INTR & ERROR bits */ - writeb(dma_stat | 6, - (void __iomem *)(hwif->dma_base + ATA_DMA_STATUS)); - else - outb(dma_stat | 6, hwif->dma_base + ATA_DMA_STATUS); - - /* purge DMA mappings */ - ide_destroy_dmatable(drive); - /* verify good DMA status */ - hwif->dma = 0; - wmb(); - return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0; -} - -EXPORT_SYMBOL(__ide_dma_end); - -/* returns 1 if dma irq issued, 0 otherwise */ -int ide_dma_test_irq(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - u8 dma_stat = hwif->tp_ops->read_sff_dma_status(hwif); - - /* return 1 if INTR asserted */ - if ((dma_stat & 4) == 4) - return 1; - if (!drive->waiting_for_dma) - printk(KERN_WARNING "%s: (%s) called while not waiting\n", - drive->name, __func__); - return 0; -} -EXPORT_SYMBOL_GPL(ide_dma_test_irq); -#else -static inline int config_drive_for_dma(ide_drive_t *drive) { return 0; } -#endif /* CONFIG_BLK_DEV_IDEDMA_SFF */ - -int __ide_dma_bad_drive (ide_drive_t *drive) -{ - struct hd_driveid *id = drive->id; + u16 *id = drive->id; int blacklist = ide_in_drive_list(id, drive_blacklist); if (blacklist) { printk(KERN_WARNING "%s: Disabling (U)DMA for %s (blacklisted)\n", - drive->name, id->model); + drive->name, (char *)&id[ATA_ID_PROD]); return blacklist; } return 0; } - EXPORT_SYMBOL(__ide_dma_bad_drive); static const u8 xfer_mode_bases[] = { @@ -612,21 +229,21 @@ static const u8 xfer_mode_bases[] = { static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base, u8 req_mode) { - struct hd_driveid *id = drive->id; + u16 *id = drive->id; ide_hwif_t *hwif = drive->hwif; const struct ide_port_ops *port_ops = hwif->port_ops; unsigned int mask = 0; - switch(base) { + switch (base) { case XFER_UDMA_0: - if ((id->field_valid & 4) == 0) + if ((id[ATA_ID_FIELD_VALID] & 4) == 0) break; if (port_ops && port_ops->udma_filter) mask = port_ops->udma_filter(drive); else mask = hwif->ultra_mask; - mask &= id->dma_ultra; + mask &= id[ATA_ID_UDMA_MODES]; /* * avoid false cable warning from eighty_ninty_three() @@ -637,19 +254,19 @@ static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base, u8 req_mode) } break; case XFER_MW_DMA_0: - if ((id->field_valid & 2) == 0) + if ((id[ATA_ID_FIELD_VALID] & 2) == 0) break; if (port_ops && port_ops->mdma_filter) mask = port_ops->mdma_filter(drive); else mask = hwif->mwdma_mask; - mask &= id->dma_mword; + mask &= id[ATA_ID_MWDMA_MODES]; break; case XFER_SW_DMA_0: - if (id->field_valid & 2) { - mask = id->dma_1word & hwif->swdma_mask; - } else if (id->tDMA) { - u8 mode = id->tDMA; + if (id[ATA_ID_FIELD_VALID] & 2) { + mask = id[ATA_ID_SWDMA_MODES] & hwif->swdma_mask; + } else if (id[ATA_ID_OLD_DMA_MODES] >> 8) { + u8 mode = id[ATA_ID_OLD_DMA_MODES] >> 8; /* * if the mode is valid convert it to the mask @@ -706,7 +323,8 @@ u8 ide_find_dma_mode(ide_drive_t *drive, u8 req_mode) /* * is this correct? */ - if (ide_dma_good_drive(drive) && drive->id->eide_dma_time < 150) + if (ide_dma_good_drive(drive) && + drive->id[ATA_ID_EIDE_DMA_TIME] < 150) mode = XFER_MW_DMA_1; } @@ -717,7 +335,6 @@ u8 ide_find_dma_mode(ide_drive_t *drive, u8 req_mode) return mode; } - EXPORT_SYMBOL_GPL(ide_find_dma_mode); static int ide_tune_dma(ide_drive_t *drive) @@ -725,7 +342,8 @@ static int ide_tune_dma(ide_drive_t *drive) ide_hwif_t *hwif = drive->hwif; u8 speed; - if (drive->nodma || (drive->id->capability & 1) == 0) + if (ata_id_has_dma(drive->id) == 0 || + (drive->dev_flags & IDE_DFLAG_NODMA)) return 0; /* consult the list of known "bad" drives */ @@ -767,13 +385,15 @@ static int ide_dma_check(ide_drive_t *drive) int ide_id_dma_bug(ide_drive_t *drive) { - struct hd_driveid *id = drive->id; + u16 *id = drive->id; - if (id->field_valid & 4) { - if ((id->dma_ultra >> 8) && (id->dma_mword >> 8)) + if (id[ATA_ID_FIELD_VALID] & 4) { + if ((id[ATA_ID_UDMA_MODES] >> 8) && + (id[ATA_ID_MWDMA_MODES] >> 8)) goto err_out; - } else if (id->field_valid & 2) { - if ((id->dma_mword >> 8) && (id->dma_1word >> 8)) + } else if (id[ATA_ID_FIELD_VALID] & 2) { + if ((id[ATA_ID_MWDMA_MODES] >> 8) && + (id[ATA_ID_SWDMA_MODES] >> 8)) goto err_out; } return 0; @@ -823,66 +443,59 @@ void ide_check_dma_crc(ide_drive_t *drive) ide_dma_on(drive); } -#ifdef CONFIG_BLK_DEV_IDEDMA_SFF -void ide_dma_lost_irq (ide_drive_t *drive) +void ide_dma_lost_irq(ide_drive_t *drive) { - printk("%s: DMA interrupt recovery\n", drive->name); + printk(KERN_ERR "%s: DMA interrupt recovery\n", drive->name); } +EXPORT_SYMBOL_GPL(ide_dma_lost_irq); -EXPORT_SYMBOL(ide_dma_lost_irq); - -void ide_dma_timeout (ide_drive_t *drive) +void ide_dma_timeout(ide_drive_t *drive) { - ide_hwif_t *hwif = HWIF(drive); + ide_hwif_t *hwif = drive->hwif; printk(KERN_ERR "%s: timeout waiting for DMA\n", drive->name); if (hwif->dma_ops->dma_test_irq(drive)) return; + ide_dump_status(drive, "DMA timeout", hwif->tp_ops->read_status(hwif)); + hwif->dma_ops->dma_end(drive); } - -EXPORT_SYMBOL(ide_dma_timeout); +EXPORT_SYMBOL_GPL(ide_dma_timeout); void ide_release_dma_engine(ide_hwif_t *hwif) { if (hwif->dmatable_cpu) { - struct pci_dev *pdev = to_pci_dev(hwif->dev); + int prd_size = hwif->prd_max_nents * hwif->prd_ent_size; - pci_free_consistent(pdev, PRD_ENTRIES * PRD_BYTES, - hwif->dmatable_cpu, hwif->dmatable_dma); + dma_free_coherent(hwif->dev, prd_size, + hwif->dmatable_cpu, hwif->dmatable_dma); hwif->dmatable_cpu = NULL; } } +EXPORT_SYMBOL_GPL(ide_release_dma_engine); int ide_allocate_dma_engine(ide_hwif_t *hwif) { - struct pci_dev *pdev = to_pci_dev(hwif->dev); + int prd_size; - hwif->dmatable_cpu = pci_alloc_consistent(pdev, - PRD_ENTRIES * PRD_BYTES, - &hwif->dmatable_dma); + if (hwif->prd_max_nents == 0) + hwif->prd_max_nents = PRD_ENTRIES; + if (hwif->prd_ent_size == 0) + hwif->prd_ent_size = PRD_BYTES; - if (hwif->dmatable_cpu) - return 0; + prd_size = hwif->prd_max_nents * hwif->prd_ent_size; - printk(KERN_ERR "%s: -- Error, unable to allocate DMA table.\n", + hwif->dmatable_cpu = dma_alloc_coherent(hwif->dev, prd_size, + &hwif->dmatable_dma, + GFP_ATOMIC); + if (hwif->dmatable_cpu == NULL) { + printk(KERN_ERR "%s: unable to allocate PRD table\n", hwif->name); + return -ENOMEM; + } - return 1; + return 0; } EXPORT_SYMBOL_GPL(ide_allocate_dma_engine); - -const struct ide_dma_ops sff_dma_ops = { - .dma_host_set = ide_dma_host_set, - .dma_setup = ide_dma_setup, - .dma_exec_cmd = ide_dma_exec_cmd, - .dma_start = ide_dma_start, - .dma_end = __ide_dma_end, - .dma_test_irq = ide_dma_test_irq, - .dma_timeout = ide_dma_timeout, - .dma_lost_irq = ide_dma_lost_irq, -}; -EXPORT_SYMBOL_GPL(sff_dma_ops); -#endif /* CONFIG_BLK_DEV_IDEDMA_SFF */ diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index e9034c0125f..cf0aa25470e 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -15,6 +15,9 @@ * Documentation/ide/ChangeLog.ide-floppy.1996-2002 */ +#define DRV_NAME "ide-floppy" +#define PFX DRV_NAME ": " + #define IDEFLOPPY_VERSION "1.00" #include <linux/module.h> @@ -31,8 +34,10 @@ #include <linux/slab.h> #include <linux/cdrom.h> #include <linux/ide.h> +#include <linux/hdreg.h> #include <linux/bitops.h> #include <linux/mutex.h> +#include <linux/scatterlist.h> #include <scsi/scsi_ioctl.h> @@ -42,42 +47,27 @@ #include <linux/io.h> #include <asm/unaligned.h> -/* define to see debug info */ -#define IDEFLOPPY_DEBUG_LOG 0 +#include "ide-floppy.h" -/* #define IDEFLOPPY_DEBUG(fmt, args...) printk(KERN_INFO fmt, ## args) */ -#define IDEFLOPPY_DEBUG(fmt, args...) +/* module parameters */ +static unsigned long debug_mask; +module_param(debug_mask, ulong, 0644); + +/* define to see debug info */ +#define IDEFLOPPY_DEBUG_LOG 0 #if IDEFLOPPY_DEBUG_LOG -#define debug_log(fmt, args...) \ - printk(KERN_INFO "ide-floppy: " fmt, ## args) +#define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, args) #else -#define debug_log(fmt, args...) do {} while (0) +#define ide_debug_log(lvl, fmt, args...) do {} while (0) #endif - -/* Some drives require a longer irq timeout. */ -#define IDEFLOPPY_WAIT_CMD (5 * WAIT_CMD) - /* * After each failed packet command we issue a request sense command and retry * the packet command IDEFLOPPY_MAX_PC_RETRIES times. */ #define IDEFLOPPY_MAX_PC_RETRIES 3 -/* - * With each packet command, we allocate a buffer of IDEFLOPPY_PC_BUFFER_SIZE - * bytes. - */ -#define IDEFLOPPY_PC_BUFFER_SIZE 256 - -/* - * In various places in the driver, we need to allocate storage for packet - * commands and requests, which will remain valid while we leave the driver to - * wait for an interrupt or a timeout event. - */ -#define IDEFLOPPY_PC_STACK (10 + IDEFLOPPY_MAX_PC_RETRIES) - /* format capacities descriptor codes */ #define CAPACITY_INVALID 0x00 #define CAPACITY_UNFORMATTED 0x01 @@ -85,79 +75,16 @@ #define CAPACITY_NO_CARTRIDGE 0x03 /* - * Most of our global data which we need to save even as we leave the driver - * due to an interrupt or a timer event is stored in a variable of type - * idefloppy_floppy_t, defined below. + * The following delay solves a problem with ATAPI Zip 100 drive where BSY bit + * was apparently being deasserted before the unit was ready to receive data. */ -typedef struct ide_floppy_obj { - ide_drive_t *drive; - ide_driver_t *driver; - struct gendisk *disk; - struct kref kref; - unsigned int openers; /* protected by BKL for now */ - - /* Current packet command */ - struct ide_atapi_pc *pc; - /* Last failed packet command */ - struct ide_atapi_pc *failed_pc; - /* Packet command stack */ - struct ide_atapi_pc pc_stack[IDEFLOPPY_PC_STACK]; - /* Next free packet command storage space */ - int pc_stack_index; - struct request rq_stack[IDEFLOPPY_PC_STACK]; - /* We implement a circular array */ - int rq_stack_index; - - /* Last error information */ - u8 sense_key, asc, ascq; - /* delay this long before sending packet command */ - u8 ticks; - int progress_indication; - - /* Device information */ - /* Current format */ - int blocks, block_size, bs_factor; - /* Last format capacity descriptor */ - u8 cap_desc[8]; - /* Copy of the flexible disk page */ - u8 flexible_disk_page[32]; - /* Write protect */ - int wp; - /* Supports format progress report */ - int srfp; -} idefloppy_floppy_t; - -#define IDEFLOPPY_TICKS_DELAY HZ/20 /* default delay for ZIP 100 (50ms) */ - -/* Defines for the MODE SENSE command */ -#define MODE_SENSE_CURRENT 0x00 -#define MODE_SENSE_CHANGEABLE 0x01 -#define MODE_SENSE_DEFAULT 0x02 -#define MODE_SENSE_SAVED 0x03 - -/* IOCTLs used in low-level formatting. */ -#define IDEFLOPPY_IOCTL_FORMAT_SUPPORTED 0x4600 -#define IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY 0x4601 -#define IDEFLOPPY_IOCTL_FORMAT_START 0x4602 -#define IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS 0x4603 +#define IDEFLOPPY_PC_DELAY (HZ/20) /* default delay for ZIP 100 (50ms) */ /* Error code returned in rq->errors to the higher part of the driver. */ #define IDEFLOPPY_ERROR_GENERAL 101 -/* - * Pages of the SELECT SENSE / MODE SENSE packet commands. - * See SFF-8070i spec. - */ -#define IDEFLOPPY_CAPABILITIES_PAGE 0x1b -#define IDEFLOPPY_FLEXIBLE_DISK_PAGE 0x05 - static DEFINE_MUTEX(idefloppy_ref_mutex); -#define to_ide_floppy(obj) container_of(obj, struct ide_floppy_obj, kref) - -#define ide_floppy_g(disk) \ - container_of((disk)->private_data, struct ide_floppy_obj, driver) - static void idefloppy_cleanup_obj(struct kref *); static struct ide_floppy_obj *ide_floppy_get(struct gendisk *disk) @@ -165,7 +92,7 @@ static struct ide_floppy_obj *ide_floppy_get(struct gendisk *disk) struct ide_floppy_obj *floppy = NULL; mutex_lock(&idefloppy_ref_mutex); - floppy = ide_floppy_g(disk); + floppy = ide_drv_g(disk, ide_floppy_obj); if (floppy) { if (ide_device_get(floppy->drive)) floppy = NULL; @@ -196,13 +123,21 @@ static int idefloppy_end_request(ide_drive_t *drive, int uptodate, int nsecs) struct request *rq = HWGROUP(drive)->rq; int error; - debug_log("Reached %s\n", __func__); + ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); switch (uptodate) { - case 0: error = IDEFLOPPY_ERROR_GENERAL; break; - case 1: error = 0; break; - default: error = uptodate; + case 0: + error = IDEFLOPPY_ERROR_GENERAL; + break; + + case 1: + error = 0; + break; + + default: + error = uptodate; } + if (error) floppy->failed_pc = NULL; /* Why does this happen? */ @@ -219,44 +154,6 @@ static int idefloppy_end_request(ide_drive_t *drive, int uptodate, int nsecs) return 0; } -static void ide_floppy_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, - unsigned int bcount, int direction) -{ - ide_hwif_t *hwif = drive->hwif; - struct request *rq = pc->rq; - struct req_iterator iter; - struct bio_vec *bvec; - unsigned long flags; - int count, done = 0; - char *data; - - rq_for_each_segment(bvec, rq, iter) { - if (!bcount) - break; - - count = min(bvec->bv_len, bcount); - - data = bvec_kmap_irq(bvec, &flags); - if (direction) - hwif->tp_ops->output_data(drive, NULL, data, count); - else - hwif->tp_ops->input_data(drive, NULL, data, count); - bvec_kunmap_irq(data, &flags); - - bcount -= count; - pc->b_count += count; - done += count; - } - - idefloppy_end_request(drive, 1, done >> 9); - - if (bcount) { - printk(KERN_ERR "%s: leftover data in %s, bcount == %d\n", - drive->name, __func__, bcount); - ide_pad_transfer(drive, direction, bcount); - } -} - static void idefloppy_update_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc) { @@ -267,50 +164,13 @@ static void idefloppy_update_buffers(ide_drive_t *drive, idefloppy_end_request(drive, 1, 0); } -/* - * Generate a new packet command request in front of the request queue, before - * the current request so that it will be processed immediately, on the next - * pass through the driver. - */ -static void idefloppy_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc, - struct request *rq) -{ - struct ide_floppy_obj *floppy = drive->driver_data; - - blk_rq_init(NULL, rq); - rq->buffer = (char *) pc; - rq->cmd_type = REQ_TYPE_SPECIAL; - rq->cmd_flags |= REQ_PREEMPT; - rq->rq_disk = floppy->disk; - memcpy(rq->cmd, pc->c, 12); - ide_do_drive_cmd(drive, rq); -} - -static struct ide_atapi_pc *idefloppy_next_pc_storage(ide_drive_t *drive) +static void ide_floppy_callback(ide_drive_t *drive, int dsc) { idefloppy_floppy_t *floppy = drive->driver_data; - - if (floppy->pc_stack_index == IDEFLOPPY_PC_STACK) - floppy->pc_stack_index = 0; - return (&floppy->pc_stack[floppy->pc_stack_index++]); -} - -static struct request *idefloppy_next_rq_storage(ide_drive_t *drive) -{ - idefloppy_floppy_t *floppy = drive->driver_data; - - if (floppy->rq_stack_index == IDEFLOPPY_PC_STACK) - floppy->rq_stack_index = 0; - return (&floppy->rq_stack[floppy->rq_stack_index++]); -} - -static void ide_floppy_callback(ide_drive_t *drive) -{ - idefloppy_floppy_t *floppy = drive->driver_data; - struct ide_atapi_pc *pc = floppy->pc; + struct ide_atapi_pc *pc = drive->pc; int uptodate = pc->error ? 0 : 1; - debug_log("Reached %s\n", __func__); + ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); if (floppy->failed_pc == pc) floppy->failed_pc = NULL; @@ -319,7 +179,7 @@ static void ide_floppy_callback(ide_drive_t *drive) (pc->rq && blk_pc_request(pc->rq))) uptodate = 1; /* FIXME */ else if (pc->c[0] == GPCMD_REQUEST_SENSE) { - u8 *buf = floppy->pc->buf; + u8 *buf = pc->buf; if (!pc->error) { floppy->sense_key = buf[2] & 0x0F; @@ -329,108 +189,20 @@ static void ide_floppy_callback(ide_drive_t *drive) (u16)get_unaligned((u16 *)&buf[16]) : 0x10000; if (floppy->failed_pc) - debug_log("pc = %x, ", floppy->failed_pc->c[0]); + ide_debug_log(IDE_DBG_PC, "pc = %x, ", + floppy->failed_pc->c[0]); - debug_log("sense key = %x, asc = %x, ascq = %x\n", - floppy->sense_key, floppy->asc, floppy->ascq); + ide_debug_log(IDE_DBG_SENSE, "sense key = %x, asc = %x," + "ascq = %x\n", floppy->sense_key, + floppy->asc, floppy->ascq); } else - printk(KERN_ERR "Error in REQUEST SENSE itself - " - "Aborting request!\n"); + printk(KERN_ERR PFX "Error in REQUEST SENSE itself - " + "Aborting request!\n"); } idefloppy_end_request(drive, uptodate, 0); } -static void idefloppy_init_pc(struct ide_atapi_pc *pc) -{ - memset(pc, 0, sizeof(*pc)); - pc->buf = pc->pc_buf; - pc->buf_size = IDEFLOPPY_PC_BUFFER_SIZE; -} - -static void idefloppy_create_request_sense_cmd(struct ide_atapi_pc *pc) -{ - idefloppy_init_pc(pc); - pc->c[0] = GPCMD_REQUEST_SENSE; - pc->c[4] = 255; - pc->req_xfer = 18; -} - -/* - * Called when an error was detected during the last packet command. We queue a - * request sense packet command in the head of the request list. - */ -static void idefloppy_retry_pc(ide_drive_t *drive) -{ - struct ide_atapi_pc *pc; - struct request *rq; - - (void)ide_read_error(drive); - pc = idefloppy_next_pc_storage(drive); - rq = idefloppy_next_rq_storage(drive); - idefloppy_create_request_sense_cmd(pc); - idefloppy_queue_pc_head(drive, pc, rq); -} - -/* The usual interrupt handler called during a packet command. */ -static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) -{ - idefloppy_floppy_t *floppy = drive->driver_data; - - return ide_pc_intr(drive, floppy->pc, idefloppy_pc_intr, - IDEFLOPPY_WAIT_CMD, NULL, idefloppy_update_buffers, - idefloppy_retry_pc, NULL, ide_floppy_io_buffers); -} - -/* - * What we have here is a classic case of a top half / bottom half interrupt - * service routine. In interrupt mode, the device sends an interrupt to signal - * that it is ready to receive a packet. However, we need to delay about 2-3 - * ticks before issuing the packet or we gets in trouble. - */ -static int idefloppy_transfer_pc(ide_drive_t *drive) -{ - idefloppy_floppy_t *floppy = drive->driver_data; - - /* Send the actual packet */ - drive->hwif->tp_ops->output_data(drive, NULL, floppy->pc->c, 12); - - /* Timeout for the packet command */ - return IDEFLOPPY_WAIT_CMD; -} - - -/* - * Called as an interrupt (or directly). When the device says it's ready for a - * packet, we schedule the packet transfer to occur about 2-3 ticks later in - * transfer_pc. - */ -static ide_startstop_t idefloppy_start_pc_transfer(ide_drive_t *drive) -{ - idefloppy_floppy_t *floppy = drive->driver_data; - struct ide_atapi_pc *pc = floppy->pc; - ide_expiry_t *expiry; - unsigned int timeout; - - /* - * The following delay solves a problem with ATAPI Zip 100 drives - * where the Busy flag was apparently being deasserted before the - * unit was ready to receive data. This was happening on a - * 1200 MHz Athlon system. 10/26/01 25msec is too short, - * 40 and 50msec work well. idefloppy_pc_intr will not be actually - * used until after the packet is moved in about 50 msec. - */ - if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) { - timeout = floppy->ticks; - expiry = &idefloppy_transfer_pc; - } else { - timeout = IDEFLOPPY_WAIT_CMD; - expiry = NULL; - } - - return ide_transfer_pc(drive, pc, idefloppy_pc_intr, timeout, expiry); -} - static void ide_floppy_report_error(idefloppy_floppy_t *floppy, struct ide_atapi_pc *pc) { @@ -440,7 +212,7 @@ static void ide_floppy_report_error(idefloppy_floppy_t *floppy, floppy->ascq == 0x00) return; - printk(KERN_ERR "ide-floppy: %s: I/O error, pc = %2x, key = %2x, " + printk(KERN_ERR PFX "%s: I/O error, pc = %2x, key = %2x, " "asc = %2x, ascq = %2x\n", floppy->drive->name, pc->c[0], floppy->sense_key, floppy->asc, floppy->ascq); @@ -455,8 +227,9 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, if (floppy->failed_pc == NULL && pc->c[0] != GPCMD_REQUEST_SENSE) floppy->failed_pc = pc; + /* Set the current packet command */ - floppy->pc = pc; + drive->pc = pc; if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES) { if (!(pc->flags & PC_FLAG_SUPPRESS_ERROR)) @@ -465,67 +238,35 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, pc->error = IDEFLOPPY_ERROR_GENERAL; floppy->failed_pc = NULL; - drive->pc_callback(drive); + drive->pc_callback(drive, 0); return ide_stopped; } - debug_log("Retry number - %d\n", pc->retries); + ide_debug_log(IDE_DBG_FUNC, "%s: Retry #%d\n", __func__, pc->retries); pc->retries++; - return ide_issue_pc(drive, pc, idefloppy_start_pc_transfer, - IDEFLOPPY_WAIT_CMD, NULL); + return ide_issue_pc(drive, WAIT_FLOPPY_CMD, NULL); } -static void idefloppy_create_prevent_cmd(struct ide_atapi_pc *pc, int prevent) +void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc) { - debug_log("creating prevent removal command, prevent = %d\n", prevent); - - idefloppy_init_pc(pc); - pc->c[0] = GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL; - pc->c[4] = prevent; -} - -static void idefloppy_create_read_capacity_cmd(struct ide_atapi_pc *pc) -{ - idefloppy_init_pc(pc); + ide_init_pc(pc); pc->c[0] = GPCMD_READ_FORMAT_CAPACITIES; pc->c[7] = 255; pc->c[8] = 255; pc->req_xfer = 255; } -static void idefloppy_create_format_unit_cmd(struct ide_atapi_pc *pc, int b, - int l, int flags) -{ - idefloppy_init_pc(pc); - pc->c[0] = GPCMD_FORMAT_UNIT; - pc->c[1] = 0x17; - - memset(pc->buf, 0, 12); - pc->buf[1] = 0xA2; - /* Default format list header, u8 1: FOV/DCRT/IMM bits set */ - - if (flags & 1) /* Verify bit on... */ - pc->buf[1] ^= 0x20; /* ... turn off DCRT bit */ - pc->buf[3] = 8; - - put_unaligned(cpu_to_be32(b), (unsigned int *)(&pc->buf[4])); - put_unaligned(cpu_to_be32(l), (unsigned int *)(&pc->buf[8])); - pc->buf_size = 12; - pc->flags |= PC_FLAG_WRITING; -} - /* A mode sense command is used to "sense" floppy parameters. */ -static void idefloppy_create_mode_sense_cmd(struct ide_atapi_pc *pc, - u8 page_code, u8 type) +void ide_floppy_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code) { u16 length = 8; /* sizeof(Mode Parameter Header) = 8 Bytes */ - idefloppy_init_pc(pc); + ide_init_pc(pc); pc->c[0] = GPCMD_MODE_SENSE_10; pc->c[1] = 0; - pc->c[2] = page_code + (type << 6); + pc->c[2] = page_code; switch (page_code) { case IDEFLOPPY_CAPABILITIES_PAGE: @@ -535,32 +276,25 @@ static void idefloppy_create_mode_sense_cmd(struct ide_atapi_pc *pc, length += 32; break; default: - printk(KERN_ERR "ide-floppy: unsupported page code " - "in create_mode_sense_cmd\n"); + printk(KERN_ERR PFX "unsupported page code in %s\n", __func__); } put_unaligned(cpu_to_be16(length), (u16 *) &pc->c[7]); pc->req_xfer = length; } -static void idefloppy_create_start_stop_cmd(struct ide_atapi_pc *pc, int start) -{ - idefloppy_init_pc(pc); - pc->c[0] = GPCMD_START_STOP_UNIT; - pc->c[4] = start; -} - -static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy, +static void idefloppy_create_rw_cmd(ide_drive_t *drive, struct ide_atapi_pc *pc, struct request *rq, unsigned long sector) { + idefloppy_floppy_t *floppy = drive->driver_data; int block = sector / floppy->bs_factor; int blocks = rq->nr_sectors / floppy->bs_factor; int cmd = rq_data_dir(rq); - debug_log("create_rw10_cmd: block == %d, blocks == %d\n", - block, blocks); + ide_debug_log(IDE_DBG_FUNC, "%s: block: %d, blocks: %d\n", __func__, + block, blocks); - idefloppy_init_pc(pc); + ide_init_pc(pc); pc->c[0] = cmd == READ ? GPCMD_READ_10 : GPCMD_WRITE_10; put_unaligned(cpu_to_be16(blocks), (unsigned short *)&pc->c[7]); put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[2]); @@ -568,7 +302,7 @@ static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy, memcpy(rq->cmd, pc->c, 12); pc->rq = rq; - pc->b_count = cmd == READ ? 0 : rq->bio->bi_size; + pc->b_count = 0; if (rq->cmd_flags & REQ_RW) pc->flags |= PC_FLAG_WRITING; pc->buf = NULL; @@ -579,10 +313,10 @@ static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy, static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, struct ide_atapi_pc *pc, struct request *rq) { - idefloppy_init_pc(pc); + ide_init_pc(pc); memcpy(pc->c, rq->cmd, sizeof(pc->c)); pc->rq = rq; - pc->b_count = rq->data_len; + pc->b_count = 0; if (rq->data_len && rq_data_dir(rq) == WRITE) pc->flags |= PC_FLAG_WRITING; pc->buf = rq->data; @@ -599,70 +333,59 @@ static ide_startstop_t idefloppy_do_request(ide_drive_t *drive, struct request *rq, sector_t block_s) { idefloppy_floppy_t *floppy = drive->driver_data; + ide_hwif_t *hwif = drive->hwif; struct ide_atapi_pc *pc; unsigned long block = (unsigned long)block_s; - debug_log("dev: %s, cmd_type: %x, errors: %d\n", - rq->rq_disk ? rq->rq_disk->disk_name : "?", - rq->cmd_type, rq->errors); - debug_log("sector: %ld, nr_sectors: %ld, " - "current_nr_sectors: %d\n", (long)rq->sector, - rq->nr_sectors, rq->current_nr_sectors); + ide_debug_log(IDE_DBG_FUNC, "%s: dev: %s, cmd: 0x%x, cmd_type: %x, " + "errors: %d\n", + __func__, rq->rq_disk ? rq->rq_disk->disk_name : "?", + rq->cmd[0], rq->cmd_type, rq->errors); + + ide_debug_log(IDE_DBG_FUNC, "%s: sector: %ld, nr_sectors: %ld, " + "current_nr_sectors: %d\n", + __func__, (long)rq->sector, rq->nr_sectors, + rq->current_nr_sectors); if (rq->errors >= ERROR_MAX) { if (floppy->failed_pc) ide_floppy_report_error(floppy, floppy->failed_pc); else - printk(KERN_ERR "ide-floppy: %s: I/O error\n", - drive->name); + printk(KERN_ERR PFX "%s: I/O error\n", drive->name); + idefloppy_end_request(drive, 0, 0); return ide_stopped; } if (blk_fs_request(rq)) { if (((long)rq->sector % floppy->bs_factor) || (rq->nr_sectors % floppy->bs_factor)) { - printk(KERN_ERR "%s: unsupported r/w request size\n", - drive->name); + printk(KERN_ERR PFX "%s: unsupported r/w rq size\n", + drive->name); idefloppy_end_request(drive, 0, 0); return ide_stopped; } - pc = idefloppy_next_pc_storage(drive); - idefloppy_create_rw_cmd(floppy, pc, rq, block); + pc = &floppy->queued_pc; + idefloppy_create_rw_cmd(drive, pc, rq, block); } else if (blk_special_request(rq)) { pc = (struct ide_atapi_pc *) rq->buffer; } else if (blk_pc_request(rq)) { - pc = idefloppy_next_pc_storage(drive); + pc = &floppy->queued_pc; idefloppy_blockpc_cmd(floppy, pc, rq); } else { - blk_dump_rq_flags(rq, - "ide-floppy: unsupported command in queue"); + blk_dump_rq_flags(rq, PFX "unsupported command in queue"); idefloppy_end_request(drive, 0, 0); return ide_stopped; } - pc->rq = rq; + ide_init_sg_cmd(drive, rq); + ide_map_sg(drive, rq); - return idefloppy_issue_pc(drive, pc); -} + pc->sg = hwif->sg_table; + pc->sg_cnt = hwif->sg_nents; -/* - * Add a special packet command request to the tail of the request queue, - * and wait for it to be serviced. - */ -static int idefloppy_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc) -{ - struct ide_floppy_obj *floppy = drive->driver_data; - struct request *rq; - int error; - - rq = blk_get_request(drive->queue, READ, __GFP_WAIT); - rq->buffer = (char *) pc; - rq->cmd_type = REQ_TYPE_SPECIAL; - memcpy(rq->cmd, pc->c, 12); - error = blk_execute_rq(drive->queue, floppy->disk, rq, 0); - blk_put_request(rq); + pc->rq = rq; - return error; + return idefloppy_issue_pc(drive, pc); } /* @@ -672,22 +395,27 @@ static int idefloppy_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc) static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; + struct gendisk *disk = floppy->disk; struct ide_atapi_pc pc; u8 *page; int capacity, lba_capacity; u16 transfer_rate, sector_size, cyls, rpm; u8 heads, sectors; - idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE, - MODE_SENSE_CURRENT); + ide_floppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE); - if (idefloppy_queue_pc_tail(drive, &pc)) { - printk(KERN_ERR "ide-floppy: Can't get flexible disk page" - " parameters\n"); + if (ide_queue_pc_tail(drive, disk, &pc)) { + printk(KERN_ERR PFX "Can't get flexible disk page params\n"); return 1; } - floppy->wp = !!(pc.buf[3] & 0x80); - set_disk_ro(floppy->disk, floppy->wp); + + if (pc.buf[3] & 0x80) + drive->atapi_flags |= IDE_AFLAG_WP; + else + drive->atapi_flags &= ~IDE_AFLAG_WP; + + set_disk_ro(disk, !!(drive->atapi_flags & IDE_AFLAG_WP)); + page = &pc.buf[8]; transfer_rate = be16_to_cpup((__be16 *)&pc.buf[8 + 2]); @@ -700,7 +428,7 @@ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive) capacity = cyls * heads * sectors * sector_size; if (memcmp(page, &floppy->flexible_disk_page, 32)) - printk(KERN_INFO "%s: %dkB, %d/%d/%d CHS, %d kBps, " + printk(KERN_INFO PFX "%s: %dkB, %d/%d/%d CHS, %d kBps, " "%d sector size, %d rpm\n", drive->name, capacity / 1024, cyls, heads, sectors, transfer_rate / 8, sector_size, rpm); @@ -712,7 +440,7 @@ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive) lba_capacity = floppy->blocks * floppy->block_size; if (capacity < lba_capacity) { - printk(KERN_NOTICE "%s: The disk reports a capacity of %d " + printk(KERN_NOTICE PFX "%s: The disk reports a capacity of %d " "bytes, but the drive only handles %d\n", drive->name, lba_capacity, capacity); floppy->blocks = floppy->block_size ? @@ -721,23 +449,6 @@ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive) return 0; } -static int idefloppy_get_sfrp_bit(ide_drive_t *drive) -{ - idefloppy_floppy_t *floppy = drive->driver_data; - struct ide_atapi_pc pc; - - floppy->srfp = 0; - idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_CAPABILITIES_PAGE, - MODE_SENSE_CURRENT); - - pc.flags |= PC_FLAG_SUPPRESS_ERROR; - if (idefloppy_queue_pc_tail(drive, &pc)) - return 1; - - floppy->srfp = pc.buf[8 + 2] & 0x40; - return (0); -} - /* * Determine if a media is present in the floppy drive, and if so, its LBA * capacity. @@ -745,6 +456,7 @@ static int idefloppy_get_sfrp_bit(ide_drive_t *drive) static int ide_floppy_get_capacity(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; + struct gendisk *disk = floppy->disk; struct ide_atapi_pc pc; u8 *cap_desc; u8 header_len, desc_cnt; @@ -756,9 +468,9 @@ static int ide_floppy_get_capacity(ide_drive_t *drive) floppy->bs_factor = 1; set_capacity(floppy->disk, 0); - idefloppy_create_read_capacity_cmd(&pc); - if (idefloppy_queue_pc_tail(drive, &pc)) { - printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n"); + ide_floppy_create_read_capacity_cmd(&pc); + if (ide_queue_pc_tail(drive, disk, &pc)) { + printk(KERN_ERR PFX "Can't get floppy parameters\n"); return 1; } header_len = pc.buf[3]; @@ -771,8 +483,9 @@ static int ide_floppy_get_capacity(ide_drive_t *drive) blocks = be32_to_cpup((__be32 *)&pc.buf[desc_start]); length = be16_to_cpup((__be16 *)&pc.buf[desc_start + 6]); - debug_log("Descriptor %d: %dkB, %d blocks, %d sector size\n", - i, blocks * length / 1024, blocks, length); + ide_debug_log(IDE_DBG_PROBE, "Descriptor %d: %dkB, %d blocks, " + "%d sector size\n", + i, blocks * length / 1024, blocks, length); if (i) continue; @@ -792,23 +505,24 @@ static int ide_floppy_get_capacity(ide_drive_t *drive) case CAPACITY_CURRENT: /* Normal Zip/LS-120 disks */ if (memcmp(cap_desc, &floppy->cap_desc, 8)) - printk(KERN_INFO "%s: %dkB, %d blocks, %d " - "sector size\n", drive->name, - blocks * length / 1024, blocks, length); + printk(KERN_INFO PFX "%s: %dkB, %d blocks, %d " + "sector size\n", + drive->name, blocks * length / 1024, + blocks, length); memcpy(&floppy->cap_desc, cap_desc, 8); if (!length || length % 512) { - printk(KERN_NOTICE "%s: %d bytes block size " - "not supported\n", drive->name, length); + printk(KERN_NOTICE PFX "%s: %d bytes block size" + " not supported\n", drive->name, length); } else { floppy->blocks = blocks; floppy->block_size = length; floppy->bs_factor = length / 512; if (floppy->bs_factor != 1) - printk(KERN_NOTICE "%s: warning: non " - "512 bytes block size not " - "fully supported\n", - drive->name); + printk(KERN_NOTICE PFX "%s: Warning: " + "non 512 bytes block size not " + "fully supported\n", + drive->name); rc = 0; } break; @@ -817,143 +531,28 @@ static int ide_floppy_get_capacity(ide_drive_t *drive) * This is a KERN_ERR so it appears on screen * for the user to see */ - printk(KERN_ERR "%s: No disk in drive\n", drive->name); + printk(KERN_ERR PFX "%s: No disk in drive\n", + drive->name); break; case CAPACITY_INVALID: - printk(KERN_ERR "%s: Invalid capacity for disk " + printk(KERN_ERR PFX "%s: Invalid capacity for disk " "in drive\n", drive->name); break; } - debug_log("Descriptor 0 Code: %d\n", - pc.buf[desc_start + 4] & 0x03); + ide_debug_log(IDE_DBG_PROBE, "Descriptor 0 Code: %d\n", + pc.buf[desc_start + 4] & 0x03); } /* Clik! disk does not support get_flexible_disk_page */ if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE)) (void) ide_floppy_get_flexible_disk_page(drive); - set_capacity(floppy->disk, floppy->blocks * floppy->bs_factor); - return rc; -} + set_capacity(disk, floppy->blocks * floppy->bs_factor); -/* - * Obtain the list of formattable capacities. - * Very similar to ide_floppy_get_capacity, except that we push the capacity - * descriptors to userland, instead of our own structures. - * - * Userland gives us the following structure: - * - * struct idefloppy_format_capacities { - * int nformats; - * struct { - * int nblocks; - * int blocksize; - * } formats[]; - * }; - * - * userland initializes nformats to the number of allocated formats[] records. - * On exit we set nformats to the number of records we've actually initialized. - */ - -static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg) -{ - struct ide_atapi_pc pc; - u8 header_len, desc_cnt; - int i, blocks, length, u_array_size, u_index; - int __user *argp; - - if (get_user(u_array_size, arg)) - return (-EFAULT); - - if (u_array_size <= 0) - return (-EINVAL); - - idefloppy_create_read_capacity_cmd(&pc); - if (idefloppy_queue_pc_tail(drive, &pc)) { - printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n"); - return (-EIO); - } - header_len = pc.buf[3]; - desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */ - - u_index = 0; - argp = arg + 1; - - /* - * We always skip the first capacity descriptor. That's the current - * capacity. We are interested in the remaining descriptors, the - * formattable capacities. - */ - for (i = 1; i < desc_cnt; i++) { - unsigned int desc_start = 4 + i*8; - - if (u_index >= u_array_size) - break; /* User-supplied buffer too small */ - - blocks = be32_to_cpup((__be32 *)&pc.buf[desc_start]); - length = be16_to_cpup((__be16 *)&pc.buf[desc_start + 6]); - - if (put_user(blocks, argp)) - return(-EFAULT); - ++argp; - - if (put_user(length, argp)) - return (-EFAULT); - ++argp; - - ++u_index; - } - - if (put_user(u_index, arg)) - return (-EFAULT); - return (0); -} - -/* - * Get ATAPI_FORMAT_UNIT progress indication. - * - * Userland gives a pointer to an int. The int is set to a progress - * indicator 0-65536, with 65536=100%. - * - * If the drive does not support format progress indication, we just check - * the dsc bit, and return either 0 or 65536. - */ - -static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg) -{ - idefloppy_floppy_t *floppy = drive->driver_data; - struct ide_atapi_pc pc; - int progress_indication = 0x10000; - - if (floppy->srfp) { - idefloppy_create_request_sense_cmd(&pc); - if (idefloppy_queue_pc_tail(drive, &pc)) - return (-EIO); - - if (floppy->sense_key == 2 && - floppy->asc == 4 && - floppy->ascq == 4) - progress_indication = floppy->progress_indication; - - /* Else assume format_unit has finished, and we're at 0x10000 */ - } else { - ide_hwif_t *hwif = drive->hwif; - unsigned long flags; - u8 stat; - - local_irq_save(flags); - stat = hwif->tp_ops->read_status(hwif); - local_irq_restore(flags); - - progress_indication = ((stat & SEEK_STAT) == 0) ? 0 : 0x10000; - } - if (put_user(progress_indication, arg)) - return (-EFAULT); - - return (0); + return rc; } -static sector_t idefloppy_capacity(ide_drive_t *drive) +sector_t ide_floppy_capacity(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; unsigned long capacity = floppy->blocks * floppy->bs_factor; @@ -961,77 +560,14 @@ static sector_t idefloppy_capacity(ide_drive_t *drive) return capacity; } -/* - * Check whether we can support a drive, based on the ATAPI IDENTIFY command - * results. - */ -static int idefloppy_identify_device(ide_drive_t *drive, struct hd_driveid *id) -{ - u8 gcw[2]; - u8 device_type, protocol, removable, drq_type, packet_size; - - *((u16 *) &gcw) = id->config; - - device_type = gcw[1] & 0x1F; - removable = (gcw[0] & 0x80) >> 7; - protocol = (gcw[1] & 0xC0) >> 6; - drq_type = (gcw[0] & 0x60) >> 5; - packet_size = gcw[0] & 0x03; - -#ifdef CONFIG_PPC - /* kludge for Apple PowerBook internal zip */ - if (device_type == 5 && - !strstr(id->model, "CD-ROM") && strstr(id->model, "ZIP")) - device_type = 0; -#endif - - if (protocol != 2) - printk(KERN_ERR "ide-floppy: Protocol (0x%02x) is not ATAPI\n", - protocol); - else if (device_type != 0) - printk(KERN_ERR "ide-floppy: Device type (0x%02x) is not set " - "to floppy\n", device_type); - else if (!removable) - printk(KERN_ERR "ide-floppy: The removable flag is not set\n"); - else if (drq_type == 3) - printk(KERN_ERR "ide-floppy: Sorry, DRQ type (0x%02x) not " - "supported\n", drq_type); - else if (packet_size != 0) - printk(KERN_ERR "ide-floppy: Packet size (0x%02x) is not 12 " - "bytes\n", packet_size); - else - return 1; - return 0; -} - -#ifdef CONFIG_IDE_PROC_FS -static void idefloppy_add_settings(ide_drive_t *drive) -{ - idefloppy_floppy_t *floppy = drive->driver_data; - - ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 1023, 1, 1, - &drive->bios_cyl, NULL); - ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, - &drive->bios_head, NULL); - ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1, - &drive->bios_sect, NULL); - ide_add_setting(drive, "ticks", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, - &floppy->ticks, NULL); -} -#else -static inline void idefloppy_add_settings(ide_drive_t *drive) { ; } -#endif - static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy) { - u8 gcw[2]; + u16 *id = drive->id; - *((u16 *) &gcw) = drive->id->config; - floppy->pc = floppy->pc_stack; - drive->pc_callback = ide_floppy_callback; + drive->pc_callback = ide_floppy_callback; + drive->pc_update_buffers = idefloppy_update_buffers; + drive->pc_io_buffers = ide_io_buffers; - if (((gcw[0] & 0x60) >> 5) == 1) - drive->atapi_flags |= IDE_AFLAG_DRQ_INTERRUPT; /* * We used to check revisions here. At this point however I'm giving up. * Just assume they are all broken, its easier. @@ -1041,10 +577,10 @@ static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy) * it. It should be fixed as of version 1.9, but to be on the safe side * we'll leave the limitation below for the 2.2.x tree. */ - if (!strncmp(drive->id->model, "IOMEGA ZIP 100 ATAPI", 20)) { + if (!strncmp((char *)&id[ATA_ID_PROD], "IOMEGA ZIP 100 ATAPI", 20)) { drive->atapi_flags |= IDE_AFLAG_ZIP_DRIVE; /* This value will be visible in the /proc/ide/hdx/settings */ - floppy->ticks = IDEFLOPPY_TICKS_DELAY; + drive->pc_delay = IDEFLOPPY_PC_DELAY; blk_queue_max_sectors(drive->queue, 64); } @@ -1052,13 +588,16 @@ static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy) * Guess what? The IOMEGA Clik! drive also needs the above fix. It makes * nasty clicking noises without it, so please don't remove this. */ - if (strncmp(drive->id->model, "IOMEGA Clik!", 11) == 0) { + if (strncmp((char *)&id[ATA_ID_PROD], "IOMEGA Clik!", 11) == 0) { blk_queue_max_sectors(drive->queue, 64); drive->atapi_flags |= IDE_AFLAG_CLIK_DRIVE; + /* IOMEGA Clik! drives do not support lock/unlock commands */ + drive->atapi_flags |= IDE_AFLAG_NO_DOORLOCK; } (void) ide_floppy_get_capacity(drive); - idefloppy_add_settings(drive); + + ide_proc_register_driver(drive, floppy->driver); } static void ide_floppy_remove(ide_drive_t *drive) @@ -1075,7 +614,7 @@ static void ide_floppy_remove(ide_drive_t *drive) static void idefloppy_cleanup_obj(struct kref *kref) { - struct ide_floppy_obj *floppy = to_ide_floppy(kref); + struct ide_floppy_obj *floppy = to_ide_drv(kref, ide_floppy_obj); ide_drive_t *drive = floppy->drive; struct gendisk *g = floppy->disk; @@ -1085,24 +624,6 @@ static void idefloppy_cleanup_obj(struct kref *kref) kfree(floppy); } -#ifdef CONFIG_IDE_PROC_FS -static int proc_idefloppy_read_capacity(char *page, char **start, off_t off, - int count, int *eof, void *data) -{ - ide_drive_t*drive = (ide_drive_t *)data; - int len; - - len = sprintf(page, "%llu\n", (long long)idefloppy_capacity(drive)); - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); -} - -static ide_proc_entry_t idefloppy_proc[] = { - { "capacity", S_IFREG|S_IRUGO, proc_idefloppy_read_capacity, NULL }, - { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL }, - { NULL, 0, NULL, NULL } -}; -#endif /* CONFIG_IDE_PROC_FS */ - static int ide_floppy_probe(ide_drive_t *); static ide_driver_t idefloppy_driver = { @@ -1114,13 +635,12 @@ static ide_driver_t idefloppy_driver = { .probe = ide_floppy_probe, .remove = ide_floppy_remove, .version = IDEFLOPPY_VERSION, - .media = ide_floppy, - .supports_dsc_overlap = 0, .do_request = idefloppy_do_request, .end_request = idefloppy_end_request, .error = __ide_error, #ifdef CONFIG_IDE_PROC_FS - .proc = idefloppy_proc, + .proc = ide_floppy_proc, + .settings = ide_floppy_settings, #endif }; @@ -1129,30 +649,24 @@ static int idefloppy_open(struct inode *inode, struct file *filp) struct gendisk *disk = inode->i_bdev->bd_disk; struct ide_floppy_obj *floppy; ide_drive_t *drive; - struct ide_atapi_pc pc; int ret = 0; - debug_log("Reached %s\n", __func__); - floppy = ide_floppy_get(disk); if (!floppy) return -ENXIO; drive = floppy->drive; + ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); + floppy->openers++; if (floppy->openers == 1) { drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS; /* Just in case */ - idefloppy_init_pc(&pc); - pc.c[0] = GPCMD_TEST_UNIT_READY; - - if (idefloppy_queue_pc_tail(drive, &pc)) { - idefloppy_create_start_stop_cmd(&pc, 1); - (void) idefloppy_queue_pc_tail(drive, &pc); - } + if (ide_do_test_unit_ready(drive, disk)) + ide_do_start_stop(drive, disk, 1); if (ide_floppy_get_capacity(drive) && (filp->f_flags & O_NDELAY) == 0 @@ -1166,16 +680,13 @@ static int idefloppy_open(struct inode *inode, struct file *filp) goto out_put_floppy; } - if (floppy->wp && (filp->f_mode & 2)) { + if ((drive->atapi_flags & IDE_AFLAG_WP) && (filp->f_mode & 2)) { ret = -EROFS; goto out_put_floppy; } + drive->atapi_flags |= IDE_AFLAG_MEDIA_CHANGED; - /* IOMEGA Clik! drives do not support lock/unlock commands */ - if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE)) { - idefloppy_create_prevent_cmd(&pc, 1); - (void) idefloppy_queue_pc_tail(drive, &pc); - } + ide_set_media_lock(drive, disk, 1); check_disk_change(inode->i_bdev); } else if (drive->atapi_flags & IDE_AFLAG_FORMAT_IN_PROGRESS) { ret = -EBUSY; @@ -1192,19 +703,13 @@ out_put_floppy: static int idefloppy_release(struct inode *inode, struct file *filp) { struct gendisk *disk = inode->i_bdev->bd_disk; - struct ide_floppy_obj *floppy = ide_floppy_g(disk); + struct ide_floppy_obj *floppy = ide_drv_g(disk, ide_floppy_obj); ide_drive_t *drive = floppy->drive; - struct ide_atapi_pc pc; - debug_log("Reached %s\n", __func__); + ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); if (floppy->openers == 1) { - /* IOMEGA Clik! drives do not support lock/unlock commands */ - if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE)) { - idefloppy_create_prevent_cmd(&pc, 0); - (void) idefloppy_queue_pc_tail(drive, &pc); - } - + ide_set_media_lock(drive, disk, 0); drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS; } @@ -1217,7 +722,8 @@ static int idefloppy_release(struct inode *inode, struct file *filp) static int idefloppy_getgeo(struct block_device *bdev, struct hd_geometry *geo) { - struct ide_floppy_obj *floppy = ide_floppy_g(bdev->bd_disk); + struct ide_floppy_obj *floppy = ide_drv_g(bdev->bd_disk, + ide_floppy_obj); ide_drive_t *drive = floppy->drive; geo->heads = drive->bios_head; @@ -1226,137 +732,15 @@ static int idefloppy_getgeo(struct block_device *bdev, struct hd_geometry *geo) return 0; } -static int ide_floppy_lockdoor(ide_drive_t *drive, struct ide_atapi_pc *pc, - unsigned long arg, unsigned int cmd) -{ - idefloppy_floppy_t *floppy = drive->driver_data; - - if (floppy->openers > 1) - return -EBUSY; - - /* The IOMEGA Clik! Drive doesn't support this command - - * no room for an eject mechanism */ - if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE)) { - int prevent = arg ? 1 : 0; - - if (cmd == CDROMEJECT) - prevent = 0; - - idefloppy_create_prevent_cmd(pc, prevent); - (void) idefloppy_queue_pc_tail(floppy->drive, pc); - } - - if (cmd == CDROMEJECT) { - idefloppy_create_start_stop_cmd(pc, 2); - (void) idefloppy_queue_pc_tail(floppy->drive, pc); - } - - return 0; -} - -static int ide_floppy_format_unit(idefloppy_floppy_t *floppy, - int __user *arg) -{ - struct ide_atapi_pc pc; - ide_drive_t *drive = floppy->drive; - int blocks, length, flags, err = 0; - - if (floppy->openers > 1) { - /* Don't format if someone is using the disk */ - drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS; - return -EBUSY; - } - - drive->atapi_flags |= IDE_AFLAG_FORMAT_IN_PROGRESS; - - /* - * Send ATAPI_FORMAT_UNIT to the drive. - * - * Userland gives us the following structure: - * - * struct idefloppy_format_command { - * int nblocks; - * int blocksize; - * int flags; - * } ; - * - * flags is a bitmask, currently, the only defined flag is: - * - * 0x01 - verify media after format. - */ - if (get_user(blocks, arg) || - get_user(length, arg+1) || - get_user(flags, arg+2)) { - err = -EFAULT; - goto out; - } - - (void) idefloppy_get_sfrp_bit(drive); - idefloppy_create_format_unit_cmd(&pc, blocks, length, flags); - - if (idefloppy_queue_pc_tail(drive, &pc)) - err = -EIO; - -out: - if (err) - drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS; - return err; -} - - -static int idefloppy_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) -{ - struct block_device *bdev = inode->i_bdev; - struct ide_floppy_obj *floppy = ide_floppy_g(bdev->bd_disk); - ide_drive_t *drive = floppy->drive; - struct ide_atapi_pc pc; - void __user *argp = (void __user *)arg; - int err; - - switch (cmd) { - case CDROMEJECT: - /* fall through */ - case CDROM_LOCKDOOR: - return ide_floppy_lockdoor(drive, &pc, arg, cmd); - case IDEFLOPPY_IOCTL_FORMAT_SUPPORTED: - return 0; - case IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY: - return ide_floppy_get_format_capacities(drive, argp); - case IDEFLOPPY_IOCTL_FORMAT_START: - if (!(file->f_mode & 2)) - return -EPERM; - - return ide_floppy_format_unit(floppy, (int __user *)arg); - case IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS: - return idefloppy_get_format_progress(drive, argp); - } - - /* - * skip SCSI_IOCTL_SEND_COMMAND (deprecated) - * and CDROM_SEND_PACKET (legacy) ioctls - */ - if (cmd != CDROM_SEND_PACKET && cmd != SCSI_IOCTL_SEND_COMMAND) - err = scsi_cmd_ioctl(file, bdev->bd_disk->queue, - bdev->bd_disk, cmd, argp); - else - err = -ENOTTY; - - if (err == -ENOTTY) - err = generic_ide_ioctl(drive, file, bdev, cmd, arg); - - return err; -} - static int idefloppy_media_changed(struct gendisk *disk) { - struct ide_floppy_obj *floppy = ide_floppy_g(disk); + struct ide_floppy_obj *floppy = ide_drv_g(disk, ide_floppy_obj); ide_drive_t *drive = floppy->drive; int ret; /* do not scan partitions twice if this is a removable device */ - if (drive->attach) { - drive->attach = 0; + if (drive->dev_flags & IDE_DFLAG_ATTACH) { + drive->dev_flags &= ~IDE_DFLAG_ATTACH; return 0; } ret = !!(drive->atapi_flags & IDE_AFLAG_MEDIA_CHANGED); @@ -1366,8 +750,8 @@ static int idefloppy_media_changed(struct gendisk *disk) static int idefloppy_revalidate_disk(struct gendisk *disk) { - struct ide_floppy_obj *floppy = ide_floppy_g(disk); - set_capacity(disk, idefloppy_capacity(floppy->drive)); + struct ide_floppy_obj *floppy = ide_drv_g(disk, ide_floppy_obj); + set_capacity(disk, ide_floppy_capacity(floppy->drive)); return 0; } @@ -1375,7 +759,7 @@ static struct block_device_operations idefloppy_ops = { .owner = THIS_MODULE, .open = idefloppy_open, .release = idefloppy_release, - .ioctl = idefloppy_ioctl, + .ioctl = ide_floppy_ioctl, .getgeo = idefloppy_getgeo, .media_changed = idefloppy_media_changed, .revalidate_disk = idefloppy_revalidate_disk @@ -1388,19 +772,19 @@ static int ide_floppy_probe(ide_drive_t *drive) if (!strstr("ide-floppy", drive->driver_req)) goto failed; - if (!drive->present) - goto failed; + if (drive->media != ide_floppy) goto failed; - if (!idefloppy_identify_device(drive, drive->id)) { - printk(KERN_ERR "ide-floppy: %s: not supported by this version" - " of ide-floppy\n", drive->name); + + if (!ide_check_atapi_device(drive, DRV_NAME)) { + printk(KERN_ERR PFX "%s: not supported by this version of " + DRV_NAME "\n", drive->name); goto failed; } floppy = kzalloc(sizeof(idefloppy_floppy_t), GFP_KERNEL); if (!floppy) { - printk(KERN_ERR "ide-floppy: %s: Can't allocate a floppy" - " structure\n", drive->name); + printk(KERN_ERR PFX "%s: Can't allocate a floppy structure\n", + drive->name); goto failed; } @@ -1410,8 +794,6 @@ static int ide_floppy_probe(ide_drive_t *drive) ide_init_disk(g, drive); - ide_proc_register_driver(drive, &idefloppy_driver); - kref_init(&floppy->kref); floppy->drive = drive; @@ -1422,13 +804,16 @@ static int ide_floppy_probe(ide_drive_t *drive) drive->driver_data = floppy; + drive->debug_mask = debug_mask; + idefloppy_setup(drive, floppy); + drive->dev_flags |= IDE_DFLAG_ATTACH; g->minors = 1 << PARTN_BITS; g->driverfs_dev = &drive->gendev; - g->flags = drive->removable ? GENHD_FL_REMOVABLE : 0; + if (drive->dev_flags & IDE_DFLAG_REMOVABLE) + g->flags = GENHD_FL_REMOVABLE; g->fops = &idefloppy_ops; - drive->attach = 1; add_disk(g); return 0; @@ -1445,11 +830,12 @@ static void __exit idefloppy_exit(void) static int __init idefloppy_init(void) { - printk("ide-floppy driver " IDEFLOPPY_VERSION "\n"); + printk(KERN_INFO DRV_NAME " driver " IDEFLOPPY_VERSION "\n"); return driver_register(&idefloppy_driver.gen_driver); } MODULE_ALIAS("ide:*m-floppy*"); +MODULE_ALIAS("ide-floppy"); module_init(idefloppy_init); module_exit(idefloppy_exit); MODULE_LICENSE("GPL"); diff --git a/drivers/ide/ide-floppy.h b/drivers/ide/ide-floppy.h new file mode 100644 index 00000000000..17cf865e583 --- /dev/null +++ b/drivers/ide/ide-floppy.h @@ -0,0 +1,62 @@ +#ifndef __IDE_FLOPPY_H +#define __IDE_FLOPPY_H + +/* + * Most of our global data which we need to save even as we leave the driver + * due to an interrupt or a timer event is stored in a variable of type + * idefloppy_floppy_t, defined below. + */ +typedef struct ide_floppy_obj { + ide_drive_t *drive; + ide_driver_t *driver; + struct gendisk *disk; + struct kref kref; + unsigned int openers; /* protected by BKL for now */ + + /* Last failed packet command */ + struct ide_atapi_pc *failed_pc; + /* used for blk_{fs,pc}_request() requests */ + struct ide_atapi_pc queued_pc; + + /* Last error information */ + u8 sense_key, asc, ascq; + + int progress_indication; + + /* Device information */ + /* Current format */ + int blocks, block_size, bs_factor; + /* Last format capacity descriptor */ + u8 cap_desc[8]; + /* Copy of the flexible disk page */ + u8 flexible_disk_page[32]; +} idefloppy_floppy_t; + +/* + * Pages of the SELECT SENSE / MODE SENSE packet commands. + * See SFF-8070i spec. + */ +#define IDEFLOPPY_CAPABILITIES_PAGE 0x1b +#define IDEFLOPPY_FLEXIBLE_DISK_PAGE 0x05 + +/* IOCTLs used in low-level formatting. */ +#define IDEFLOPPY_IOCTL_FORMAT_SUPPORTED 0x4600 +#define IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY 0x4601 +#define IDEFLOPPY_IOCTL_FORMAT_START 0x4602 +#define IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS 0x4603 + +/* ide-floppy.c */ +void ide_floppy_create_mode_sense_cmd(struct ide_atapi_pc *, u8); +void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *); +sector_t ide_floppy_capacity(ide_drive_t *); + +/* ide-floppy_ioctl.c */ +int ide_floppy_ioctl(struct inode *, struct file *, unsigned, unsigned long); + +#ifdef CONFIG_IDE_PROC_FS +/* ide-floppy_proc.c */ +extern ide_proc_entry_t ide_floppy_proc[]; +extern const struct ide_proc_devset ide_floppy_settings[]; +#endif + +#endif /*__IDE_FLOPPY_H */ diff --git a/drivers/ide/ide-floppy_ioctl.c b/drivers/ide/ide-floppy_ioctl.c new file mode 100644 index 00000000000..a3a7a0809e2 --- /dev/null +++ b/drivers/ide/ide-floppy_ioctl.c @@ -0,0 +1,293 @@ +/* + * ide-floppy IOCTLs handling. + */ + +#include <linux/kernel.h> +#include <linux/ide.h> +#include <linux/cdrom.h> + +#include <asm/unaligned.h> + +#include <scsi/scsi_ioctl.h> + +#include "ide-floppy.h" + +/* + * Obtain the list of formattable capacities. + * Very similar to ide_floppy_get_capacity, except that we push the capacity + * descriptors to userland, instead of our own structures. + * + * Userland gives us the following structure: + * + * struct idefloppy_format_capacities { + * int nformats; + * struct { + * int nblocks; + * int blocksize; + * } formats[]; + * }; + * + * userland initializes nformats to the number of allocated formats[] records. + * On exit we set nformats to the number of records we've actually initialized. + */ + +static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg) +{ + struct ide_floppy_obj *floppy = drive->driver_data; + struct ide_atapi_pc pc; + u8 header_len, desc_cnt; + int i, blocks, length, u_array_size, u_index; + int __user *argp; + + if (get_user(u_array_size, arg)) + return -EFAULT; + + if (u_array_size <= 0) + return -EINVAL; + + ide_floppy_create_read_capacity_cmd(&pc); + if (ide_queue_pc_tail(drive, floppy->disk, &pc)) { + printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n"); + return -EIO; + } + + header_len = pc.buf[3]; + desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */ + + u_index = 0; + argp = arg + 1; + + /* + * We always skip the first capacity descriptor. That's the current + * capacity. We are interested in the remaining descriptors, the + * formattable capacities. + */ + for (i = 1; i < desc_cnt; i++) { + unsigned int desc_start = 4 + i*8; + + if (u_index >= u_array_size) + break; /* User-supplied buffer too small */ + + blocks = be32_to_cpup((__be32 *)&pc.buf[desc_start]); + length = be16_to_cpup((__be16 *)&pc.buf[desc_start + 6]); + + if (put_user(blocks, argp)) + return -EFAULT; + + ++argp; + + if (put_user(length, argp)) + return -EFAULT; + + ++argp; + + ++u_index; + } + + if (put_user(u_index, arg)) + return -EFAULT; + + return 0; +} + +static void ide_floppy_create_format_unit_cmd(struct ide_atapi_pc *pc, int b, + int l, int flags) +{ + ide_init_pc(pc); + pc->c[0] = GPCMD_FORMAT_UNIT; + pc->c[1] = 0x17; + + memset(pc->buf, 0, 12); + pc->buf[1] = 0xA2; + /* Default format list header, u8 1: FOV/DCRT/IMM bits set */ + + if (flags & 1) /* Verify bit on... */ + pc->buf[1] ^= 0x20; /* ... turn off DCRT bit */ + pc->buf[3] = 8; + + put_unaligned(cpu_to_be32(b), (unsigned int *)(&pc->buf[4])); + put_unaligned(cpu_to_be32(l), (unsigned int *)(&pc->buf[8])); + pc->buf_size = 12; + pc->flags |= PC_FLAG_WRITING; +} + +static int ide_floppy_get_sfrp_bit(ide_drive_t *drive) +{ + idefloppy_floppy_t *floppy = drive->driver_data; + struct ide_atapi_pc pc; + + drive->atapi_flags &= ~IDE_AFLAG_SRFP; + + ide_floppy_create_mode_sense_cmd(&pc, IDEFLOPPY_CAPABILITIES_PAGE); + pc.flags |= PC_FLAG_SUPPRESS_ERROR; + + if (ide_queue_pc_tail(drive, floppy->disk, &pc)) + return 1; + + if (pc.buf[8 + 2] & 0x40) + drive->atapi_flags |= IDE_AFLAG_SRFP; + + return 0; +} + +static int ide_floppy_format_unit(ide_drive_t *drive, int __user *arg) +{ + idefloppy_floppy_t *floppy = drive->driver_data; + struct ide_atapi_pc pc; + int blocks, length, flags, err = 0; + + if (floppy->openers > 1) { + /* Don't format if someone is using the disk */ + drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS; + return -EBUSY; + } + + drive->atapi_flags |= IDE_AFLAG_FORMAT_IN_PROGRESS; + + /* + * Send ATAPI_FORMAT_UNIT to the drive. + * + * Userland gives us the following structure: + * + * struct idefloppy_format_command { + * int nblocks; + * int blocksize; + * int flags; + * } ; + * + * flags is a bitmask, currently, the only defined flag is: + * + * 0x01 - verify media after format. + */ + if (get_user(blocks, arg) || + get_user(length, arg+1) || + get_user(flags, arg+2)) { + err = -EFAULT; + goto out; + } + + (void)ide_floppy_get_sfrp_bit(drive); + ide_floppy_create_format_unit_cmd(&pc, blocks, length, flags); + + if (ide_queue_pc_tail(drive, floppy->disk, &pc)) + err = -EIO; + +out: + if (err) + drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS; + return err; +} + +/* + * Get ATAPI_FORMAT_UNIT progress indication. + * + * Userland gives a pointer to an int. The int is set to a progress + * indicator 0-65536, with 65536=100%. + * + * If the drive does not support format progress indication, we just check + * the dsc bit, and return either 0 or 65536. + */ + +static int ide_floppy_get_format_progress(ide_drive_t *drive, int __user *arg) +{ + idefloppy_floppy_t *floppy = drive->driver_data; + struct ide_atapi_pc pc; + int progress_indication = 0x10000; + + if (drive->atapi_flags & IDE_AFLAG_SRFP) { + ide_create_request_sense_cmd(drive, &pc); + if (ide_queue_pc_tail(drive, floppy->disk, &pc)) + return -EIO; + + if (floppy->sense_key == 2 && + floppy->asc == 4 && + floppy->ascq == 4) + progress_indication = floppy->progress_indication; + + /* Else assume format_unit has finished, and we're at 0x10000 */ + } else { + ide_hwif_t *hwif = drive->hwif; + unsigned long flags; + u8 stat; + + local_irq_save(flags); + stat = hwif->tp_ops->read_status(hwif); + local_irq_restore(flags); + + progress_indication = ((stat & ATA_DSC) == 0) ? 0 : 0x10000; + } + + if (put_user(progress_indication, arg)) + return -EFAULT; + + return 0; +} + +static int ide_floppy_lockdoor(ide_drive_t *drive, struct ide_atapi_pc *pc, + unsigned long arg, unsigned int cmd) +{ + idefloppy_floppy_t *floppy = drive->driver_data; + struct gendisk *disk = floppy->disk; + int prevent = (arg && cmd != CDROMEJECT) ? 1 : 0; + + if (floppy->openers > 1) + return -EBUSY; + + ide_set_media_lock(drive, disk, prevent); + + if (cmd == CDROMEJECT) + ide_do_start_stop(drive, disk, 2); + + return 0; +} + +static int ide_floppy_format_ioctl(ide_drive_t *drive, struct file *file, + unsigned int cmd, void __user *argp) +{ + switch (cmd) { + case IDEFLOPPY_IOCTL_FORMAT_SUPPORTED: + return 0; + case IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY: + return ide_floppy_get_format_capacities(drive, argp); + case IDEFLOPPY_IOCTL_FORMAT_START: + if (!(file->f_mode & 2)) + return -EPERM; + return ide_floppy_format_unit(drive, (int __user *)argp); + case IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS: + return ide_floppy_get_format_progress(drive, argp); + default: + return -ENOTTY; + } +} + +int ide_floppy_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct block_device *bdev = inode->i_bdev; + struct ide_floppy_obj *floppy = ide_drv_g(bdev->bd_disk, + ide_floppy_obj); + ide_drive_t *drive = floppy->drive; + struct ide_atapi_pc pc; + void __user *argp = (void __user *)arg; + int err; + + if (cmd == CDROMEJECT || cmd == CDROM_LOCKDOOR) + return ide_floppy_lockdoor(drive, &pc, arg, cmd); + + err = ide_floppy_format_ioctl(drive, file, cmd, argp); + if (err != -ENOTTY) + return err; + + /* + * skip SCSI_IOCTL_SEND_COMMAND (deprecated) + * and CDROM_SEND_PACKET (legacy) ioctls + */ + if (cmd != CDROM_SEND_PACKET && cmd != SCSI_IOCTL_SEND_COMMAND) + err = scsi_cmd_ioctl(file, bdev->bd_disk->queue, + bdev->bd_disk, cmd, argp); + + if (err == -ENOTTY) + err = generic_ide_ioctl(drive, file, bdev, cmd, arg); + + return err; +} diff --git a/drivers/ide/ide-floppy_proc.c b/drivers/ide/ide-floppy_proc.c new file mode 100644 index 00000000000..76f0c6c4eca --- /dev/null +++ b/drivers/ide/ide-floppy_proc.c @@ -0,0 +1,33 @@ +#include <linux/kernel.h> +#include <linux/ide.h> + +#include "ide-floppy.h" + +static int proc_idefloppy_read_capacity(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + ide_drive_t*drive = (ide_drive_t *)data; + int len; + + len = sprintf(page, "%llu\n", (long long)ide_floppy_capacity(drive)); + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); +} + +ide_proc_entry_t ide_floppy_proc[] = { + { "capacity", S_IFREG|S_IRUGO, proc_idefloppy_read_capacity, NULL }, + { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL }, + { NULL, 0, NULL, NULL } +}; + +ide_devset_rw_field(bios_cyl, bios_cyl); +ide_devset_rw_field(bios_head, bios_head); +ide_devset_rw_field(bios_sect, bios_sect); +ide_devset_rw_field(ticks, pc_delay); + +const struct ide_proc_devset ide_floppy_settings[] = { + IDE_PROC_DEVSET(bios_cyl, 0, 1023), + IDE_PROC_DEVSET(bios_head, 0, 255), + IDE_PROC_DEVSET(bios_sect, 0, 63), + IDE_PROC_DEVSET(ticks, 0, 255), + { 0 }, +}; diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c index 8fe8b5b9cf7..81a5282ce1e 100644 --- a/drivers/ide/ide-generic.c +++ b/drivers/ide/ide-generic.c @@ -19,6 +19,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/ide.h> +#include <linux/pci_ids.h> /* FIXME: convert m32r to use ide_platform host driver */ #ifdef CONFIG_M32R @@ -27,7 +28,7 @@ #define DRV_NAME "ide_generic" -static int probe_mask = 0x03; +static int probe_mask; module_param(probe_mask, int, 0); MODULE_PARM_DESC(probe_mask, "probe mask for legacy ISA IDE ports"); @@ -100,27 +101,64 @@ static const u16 legacy_bases[] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 }; static const int legacy_irqs[] = { 14, 15, 11, 10, 8, 12 }; #endif +static void ide_generic_check_pci_legacy_iobases(int *primary, int *secondary) +{ + struct pci_dev *p = NULL; + u16 val; + + for_each_pci_dev(p) { + + if (pci_resource_start(p, 0) == 0x1f0) + *primary = 1; + if (pci_resource_start(p, 2) == 0x170) + *secondary = 1; + + /* Cyrix CS55{1,2}0 pre SFF MWDMA ATA on the bridge */ + if (p->vendor == PCI_VENDOR_ID_CYRIX && + (p->device == PCI_DEVICE_ID_CYRIX_5510 || + p->device == PCI_DEVICE_ID_CYRIX_5520)) + *primary = *secondary = 1; + + /* Intel MPIIX - PIO ATA on non PCI side of bridge */ + if (p->vendor == PCI_VENDOR_ID_INTEL && + p->device == PCI_DEVICE_ID_INTEL_82371MX) { + + pci_read_config_word(p, 0x6C, &val); + if (val & 0x8000) { + /* ATA port enabled */ + if (val & 0x4000) + *secondary = 1; + else + *primary = 1; + } + } + } +} + static int __init ide_generic_init(void) { - hw_regs_t hw[MAX_HWIFS], *hws[MAX_HWIFS]; - struct ide_host *host; + hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; unsigned long io_addr; - int i, rc; + int i, rc = 0, primary = 0, secondary = 0; -#ifdef CONFIG_MIPS - if (!ide_probe_legacy()) - return -ENODEV; -#endif - printk(KERN_INFO DRV_NAME ": please use \"probe_mask=0x3f\" module " - "parameter for probing all legacy ISA IDE ports\n"); + ide_generic_check_pci_legacy_iobases(&primary, &secondary); + + if (!probe_mask) { + printk(KERN_INFO DRV_NAME ": please use \"probe_mask=0x3f\" " + "module parameter for probing all legacy ISA IDE ports\n"); + + if (primary == 0) + probe_mask |= 0x1; - memset(hws, 0, sizeof(hw_regs_t *) * MAX_HWIFS); + if (secondary == 0) + probe_mask |= 0x2; + } else + printk(KERN_INFO DRV_NAME ": enforcing probing of I/O ports " + "upon user request\n"); for (i = 0; i < ARRAY_SIZE(legacy_bases); i++) { io_addr = legacy_bases[i]; - hws[i] = NULL; - if ((probe_mask & (1 << i)) && io_addr) { if (!request_region(io_addr, 8, DRV_NAME)) { printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX " @@ -137,45 +175,27 @@ static int __init ide_generic_init(void) continue; } - memset(&hw[i], 0, sizeof(hw[i])); - ide_std_init_ports(&hw[i], io_addr, io_addr + 0x206); + memset(&hw, 0, sizeof(hw)); + ide_std_init_ports(&hw, io_addr, io_addr + 0x206); #ifdef CONFIG_IA64 - hw[i].irq = isa_irq_to_vector(legacy_irqs[i]); + hw.irq = isa_irq_to_vector(legacy_irqs[i]); #else - hw[i].irq = legacy_irqs[i]; + hw.irq = legacy_irqs[i]; #endif - hw[i].chipset = ide_generic; + hw.chipset = ide_generic; - hws[i] = &hw[i]; + rc = ide_host_add(NULL, hws, NULL); + if (rc) { + release_region(io_addr + 0x206, 1); + release_region(io_addr, 8); + } } } - host = ide_host_alloc_all(NULL, hws); - if (host == NULL) { - rc = -ENOMEM; - goto err; - } - - rc = ide_host_register(host, NULL, hws); - if (rc) - goto err_free; - if (ide_generic_sysfs_init()) printk(KERN_ERR DRV_NAME ": failed to create ide_generic " "class\n"); - return 0; -err_free: - ide_host_free(host); -err: - for (i = 0; i < MAX_HWIFS; i++) { - if (hws[i] == NULL) - continue; - - io_addr = hws[i]->io_ports.data_addr; - release_region(io_addr + 0x206, 1); - release_region(io_addr, 8); - } return rc; } diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index a896a283f27..77c6eaeacef 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -40,6 +40,7 @@ #include <linux/pci.h> #include <linux/delay.h> #include <linux/ide.h> +#include <linux/hdreg.h> #include <linux/completion.h> #include <linux/reboot.h> #include <linux/cdrom.h> @@ -77,8 +78,9 @@ static int __ide_end_request(ide_drive_t *drive, struct request *rq, * decide whether to reenable DMA -- 3 is a random magic for now, * if we DMA timeout more than 3 times, just stay in PIO */ - if (drive->state == DMA_PIO_RETRY && drive->retry_pio <= 3) { - drive->state = 0; + if ((drive->dev_flags & IDE_DFLAG_DMA_PIO_RETRY) && + drive->retry_pio <= 3) { + drive->dev_flags &= ~IDE_DFLAG_DMA_PIO_RETRY; ide_dma_on(drive); } @@ -130,21 +132,6 @@ int ide_end_request (ide_drive_t *drive, int uptodate, int nr_sectors) } EXPORT_SYMBOL(ide_end_request); -/* - * Power Management state machine. This one is rather trivial for now, - * we should probably add more, like switching back to PIO on suspend - * to help some BIOSes, re-do the door locking on resume, etc... - */ - -enum { - ide_pm_flush_cache = ide_pm_state_start_suspend, - idedisk_pm_standby, - - idedisk_pm_restore_pio = ide_pm_state_start_resume, - idedisk_pm_idle, - ide_pm_restore_dma, -}; - static void ide_complete_power_step(ide_drive_t *drive, struct request *rq, u8 stat, u8 error) { struct request_pm_state *pm = rq->data; @@ -153,20 +140,20 @@ static void ide_complete_power_step(ide_drive_t *drive, struct request *rq, u8 s return; switch (pm->pm_step) { - case ide_pm_flush_cache: /* Suspend step 1 (flush cache) complete */ + case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */ if (pm->pm_state == PM_EVENT_FREEZE) - pm->pm_step = ide_pm_state_completed; + pm->pm_step = IDE_PM_COMPLETED; else - pm->pm_step = idedisk_pm_standby; + pm->pm_step = IDE_PM_STANDBY; break; - case idedisk_pm_standby: /* Suspend step 2 (standby) complete */ - pm->pm_step = ide_pm_state_completed; + case IDE_PM_STANDBY: /* Suspend step 2 (standby) */ + pm->pm_step = IDE_PM_COMPLETED; break; - case idedisk_pm_restore_pio: /* Resume step 1 complete */ - pm->pm_step = idedisk_pm_idle; + case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */ + pm->pm_step = IDE_PM_IDLE; break; - case idedisk_pm_idle: /* Resume step 2 (idle) complete */ - pm->pm_step = ide_pm_restore_dma; + case IDE_PM_IDLE: /* Resume step 2 (idle)*/ + pm->pm_step = IDE_PM_RESTORE_DMA; break; } } @@ -179,40 +166,37 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * memset(args, 0, sizeof(*args)); switch (pm->pm_step) { - case ide_pm_flush_cache: /* Suspend step 1 (flush cache) */ + case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */ if (drive->media != ide_disk) break; /* Not supported? Switch to next step now. */ - if (!drive->wcache || !ide_id_has_flush_cache(drive->id)) { + if (ata_id_flush_enabled(drive->id) == 0 || + (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) { ide_complete_power_step(drive, rq, 0, 0); return ide_stopped; } - if (ide_id_has_flush_cache_ext(drive->id)) - args->tf.command = WIN_FLUSH_CACHE_EXT; + if (ata_id_flush_ext_enabled(drive->id)) + args->tf.command = ATA_CMD_FLUSH_EXT; else - args->tf.command = WIN_FLUSH_CACHE; + args->tf.command = ATA_CMD_FLUSH; goto out_do_tf; - - case idedisk_pm_standby: /* Suspend step 2 (standby) */ - args->tf.command = WIN_STANDBYNOW1; + case IDE_PM_STANDBY: /* Suspend step 2 (standby) */ + args->tf.command = ATA_CMD_STANDBYNOW1; goto out_do_tf; - - case idedisk_pm_restore_pio: /* Resume step 1 (restore PIO) */ + case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */ ide_set_max_pio(drive); /* - * skip idedisk_pm_idle for ATAPI devices + * skip IDE_PM_IDLE for ATAPI devices */ if (drive->media != ide_disk) - pm->pm_step = ide_pm_restore_dma; + pm->pm_step = IDE_PM_RESTORE_DMA; else ide_complete_power_step(drive, rq, 0, 0); return ide_stopped; - - case idedisk_pm_idle: /* Resume step 2 (idle) */ - args->tf.command = WIN_IDLEIMMEDIATE; + case IDE_PM_IDLE: /* Resume step 2 (idle) */ + args->tf.command = ATA_CMD_IDLEIMMEDIATE; goto out_do_tf; - - case ide_pm_restore_dma: /* Resume step 3 (restore DMA) */ + case IDE_PM_RESTORE_DMA: /* Resume step 3 (restore DMA) */ /* * Right now, all we do is call ide_set_dma(drive), * we could be smarter and check for current xfer_speed @@ -221,12 +205,13 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * if (drive->hwif->dma_ops == NULL) break; /* - * TODO: respect ->using_dma setting + * TODO: respect IDE_DFLAG_USING_DMA */ ide_set_dma(drive); break; } - pm->pm_step = ide_pm_state_completed; + + pm->pm_step = IDE_PM_COMPLETED; return ide_stopped; out_do_tf: @@ -286,7 +271,7 @@ static void ide_complete_pm_request (ide_drive_t *drive, struct request *rq) if (blk_pm_suspend_request(rq)) { blk_stop_queue(drive->queue); } else { - drive->blocked = 0; + drive->dev_flags &= ~IDE_DFLAG_BLOCKED; blk_start_queue(drive->queue); } HWGROUP(drive)->rq = NULL; @@ -322,7 +307,7 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err) ide_task_t *task = (ide_task_t *)rq->special; if (rq->errors == 0) - rq->errors = !OK_STAT(stat, READY_STAT, BAD_STAT); + rq->errors = !OK_STAT(stat, ATA_DRDY, BAD_STAT); if (task) { struct ide_taskfile *tf = &task->tf; @@ -342,7 +327,7 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err) drive->name, rq->pm->pm_step, stat, err); #endif ide_complete_power_step(drive, rq, stat, err); - if (pm->pm_step == ide_pm_state_completed) + if (pm->pm_step == IDE_PM_COMPLETED) ide_complete_pm_request(drive, rq); return; } @@ -373,29 +358,30 @@ static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, u8 { ide_hwif_t *hwif = drive->hwif; - if (stat & BUSY_STAT || ((stat & WRERR_STAT) && !drive->nowerr)) { + if ((stat & ATA_BUSY) || + ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) { /* other bits are useless when BUSY */ rq->errors |= ERROR_RESET; - } else if (stat & ERR_STAT) { + } else if (stat & ATA_ERR) { /* err has different meaning on cdrom and tape */ - if (err == ABRT_ERR) { - if (drive->select.b.lba && - /* some newer drives don't support WIN_SPECIFY */ - hwif->tp_ops->read_status(hwif) == WIN_SPECIFY) + if (err == ATA_ABORTED) { + if ((drive->dev_flags & IDE_DFLAG_LBA) && + /* some newer drives don't support ATA_CMD_INIT_DEV_PARAMS */ + hwif->tp_ops->read_status(hwif) == ATA_CMD_INIT_DEV_PARAMS) return ide_stopped; } else if ((err & BAD_CRC) == BAD_CRC) { /* UDMA crc error, just retry the operation */ drive->crc_count++; - } else if (err & (BBD_ERR | ECC_ERR)) { + } else if (err & (ATA_BBK | ATA_UNC)) { /* retries won't help these */ rq->errors = ERROR_MAX; - } else if (err & TRK0_ERR) { + } else if (err & ATA_TRK0NF) { /* help it find track zero */ rq->errors |= ERROR_RECAL; } } - if ((stat & DRQ_STAT) && rq_data_dir(rq) == READ && + if ((stat & ATA_DRQ) && rq_data_dir(rq) == READ && (hwif->host_flags & IDE_HFLAG_ERROR_STOPS_FIFO) == 0) { int nsect = drive->mult_count ? drive->mult_count : 1; @@ -407,7 +393,7 @@ static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, u8 return ide_stopped; } - if (hwif->tp_ops->read_status(hwif) & (BUSY_STAT | DRQ_STAT)) + if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ)) rq->errors |= ERROR_RESET; if ((rq->errors & ERROR_RESET) == ERROR_RESET) { @@ -427,16 +413,17 @@ static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq, u { ide_hwif_t *hwif = drive->hwif; - if (stat & BUSY_STAT || ((stat & WRERR_STAT) && !drive->nowerr)) { + if ((stat & ATA_BUSY) || + ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) { /* other bits are useless when BUSY */ rq->errors |= ERROR_RESET; } else { /* add decoding error stuff */ } - if (hwif->tp_ops->read_status(hwif) & (BUSY_STAT | DRQ_STAT)) + if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ)) /* force an abort */ - hwif->tp_ops->exec_command(hwif, WIN_IDLEIMMEDIATE); + hwif->tp_ops->exec_command(hwif, ATA_CMD_IDLEIMMEDIATE); if (rq->errors >= ERROR_MAX) { ide_kill_rq(drive, rq); @@ -508,20 +495,20 @@ static void ide_tf_set_specify_cmd(ide_drive_t *drive, struct ide_taskfile *tf) tf->lbal = drive->sect; tf->lbam = drive->cyl; tf->lbah = drive->cyl >> 8; - tf->device = ((drive->head - 1) | drive->select.all) & ~ATA_LBA; - tf->command = WIN_SPECIFY; + tf->device = (drive->head - 1) | drive->select; + tf->command = ATA_CMD_INIT_DEV_PARAMS; } static void ide_tf_set_restore_cmd(ide_drive_t *drive, struct ide_taskfile *tf) { tf->nsect = drive->sect; - tf->command = WIN_RESTORE; + tf->command = ATA_CMD_RESTORE; } static void ide_tf_set_setmult_cmd(ide_drive_t *drive, struct ide_taskfile *tf) { tf->nsect = drive->mult_req; - tf->command = WIN_SETMULT; + tf->command = ATA_CMD_SET_MULTI; } static ide_startstop_t ide_disk_special(ide_drive_t *drive) @@ -540,8 +527,6 @@ static ide_startstop_t ide_disk_special(ide_drive_t *drive) ide_tf_set_restore_cmd(drive, &args.tf); } else if (s->b.set_multmode) { s->b.set_multmode = 0; - if (drive->mult_req > drive->id->max_multsect) - drive->mult_req = drive->id->max_multsect; ide_tf_set_setmult_cmd(drive, &args.tf); } else if (s->all) { int special = s->all; @@ -558,37 +543,14 @@ static ide_startstop_t ide_disk_special(ide_drive_t *drive) return ide_started; } -/* - * handle HDIO_SET_PIO_MODE ioctl abusers here, eventually it will go away - */ -static int set_pio_mode_abuse(ide_hwif_t *hwif, u8 req_pio) -{ - switch (req_pio) { - case 202: - case 201: - case 200: - case 102: - case 101: - case 100: - return (hwif->host_flags & IDE_HFLAG_ABUSE_DMA_MODES) ? 1 : 0; - case 9: - case 8: - return (hwif->host_flags & IDE_HFLAG_ABUSE_PREFETCH) ? 1 : 0; - case 7: - case 6: - return (hwif->host_flags & IDE_HFLAG_ABUSE_FAST_DEVSEL) ? 1 : 0; - default: - return 0; - } -} - /** * do_special - issue some special commands * @drive: drive the command is for * - * do_special() is used to issue WIN_SPECIFY, WIN_RESTORE, and WIN_SETMULT - * commands to a drive. It used to do much more, but has been scaled - * back. + * do_special() is used to issue ATA_CMD_INIT_DEV_PARAMS, + * ATA_CMD_RESTORE and ATA_CMD_SET_MULTI commands to a drive. + * + * It used to do much more, but has been scaled back. */ static ide_startstop_t do_special (ide_drive_t *drive) @@ -598,45 +560,12 @@ static ide_startstop_t do_special (ide_drive_t *drive) #ifdef DEBUG printk("%s: do_special: 0x%02x\n", drive->name, s->all); #endif - if (s->b.set_tune) { - ide_hwif_t *hwif = drive->hwif; - const struct ide_port_ops *port_ops = hwif->port_ops; - u8 req_pio = drive->tune_req; - - s->b.set_tune = 0; - - if (set_pio_mode_abuse(drive->hwif, req_pio)) { - /* - * take ide_lock for drive->[no_]unmask/[no_]io_32bit - */ - if (req_pio == 8 || req_pio == 9) { - unsigned long flags; - - spin_lock_irqsave(&ide_lock, flags); - port_ops->set_pio_mode(drive, req_pio); - spin_unlock_irqrestore(&ide_lock, flags); - } else - port_ops->set_pio_mode(drive, req_pio); - } else { - int keep_dma = drive->using_dma; - - ide_set_pio(drive, req_pio); - - if (hwif->host_flags & IDE_HFLAG_SET_PIO_MODE_KEEP_DMA) { - if (keep_dma) - ide_dma_on(drive); - } - } - - return ide_stopped; - } else { - if (drive->media == ide_disk) - return ide_disk_special(drive); + if (drive->media == ide_disk) + return ide_disk_special(drive); - s->all = 0; - drive->mult_req = 0; - return ide_stopped; - } + s->all = 0; + drive->mult_req = 0; + return ide_stopped; } void ide_map_sg(ide_drive_t *drive, struct request *rq) @@ -716,9 +645,71 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, return ide_stopped; } +int ide_devset_execute(ide_drive_t *drive, const struct ide_devset *setting, + int arg) +{ + struct request_queue *q = drive->queue; + struct request *rq; + int ret = 0; + + if (!(setting->flags & DS_SYNC)) + return setting->set(drive, arg); + + rq = blk_get_request(q, READ, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_SPECIAL; + rq->cmd_len = 5; + rq->cmd[0] = REQ_DEVSET_EXEC; + *(int *)&rq->cmd[1] = arg; + rq->special = setting->set; + + if (blk_execute_rq(q, NULL, rq, 0)) + ret = rq->errors; + blk_put_request(rq); + + return ret; +} +EXPORT_SYMBOL_GPL(ide_devset_execute); + static ide_startstop_t ide_special_rq(ide_drive_t *drive, struct request *rq) { - switch (rq->cmd[0]) { + u8 cmd = rq->cmd[0]; + + if (cmd == REQ_PARK_HEADS || cmd == REQ_UNPARK_HEADS) { + ide_task_t task; + struct ide_taskfile *tf = &task.tf; + + memset(&task, 0, sizeof(task)); + if (cmd == REQ_PARK_HEADS) { + drive->sleep = *(unsigned long *)rq->special; + drive->dev_flags |= IDE_DFLAG_SLEEPING; + tf->command = ATA_CMD_IDLEIMMEDIATE; + tf->feature = 0x44; + tf->lbal = 0x4c; + tf->lbam = 0x4e; + tf->lbah = 0x55; + task.tf_flags |= IDE_TFLAG_CUSTOM_HANDLER; + } else /* cmd == REQ_UNPARK_HEADS */ + tf->command = ATA_CMD_CHK_POWER; + + task.tf_flags |= IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + task.rq = rq; + drive->hwif->data_phase = task.data_phase = TASKFILE_NO_DATA; + return do_rw_taskfile(drive, &task); + } + + switch (cmd) { + case REQ_DEVSET_EXEC: + { + int err, (*setfunc)(ide_drive_t *, int) = rq->special; + + err = setfunc(drive, *(int *)&rq->cmd[1]); + if (err) + rq->errors = err; + else + err = 1; + ide_end_request(drive, err, 0); + return ide_stopped; + } case REQ_DRIVE_RESET: return ide_do_reset(drive); default: @@ -733,11 +724,11 @@ static void ide_check_pm_state(ide_drive_t *drive, struct request *rq) struct request_pm_state *pm = rq->data; if (blk_pm_suspend_request(rq) && - pm->pm_step == ide_pm_state_start_suspend) + pm->pm_step == IDE_PM_START_SUSPEND) /* Mark drive blocked when starting the suspend sequence. */ - drive->blocked = 1; + drive->dev_flags |= IDE_DFLAG_BLOCKED; else if (blk_pm_resume_request(rq) && - pm->pm_step == ide_pm_state_start_resume) { + pm->pm_step == IDE_PM_START_RESUME) { /* * The first thing we do on wakeup is to wait for BSY bit to * go away (with a looong timeout) as a drive on this hwif may @@ -766,9 +757,7 @@ static void ide_check_pm_state(ide_drive_t *drive, struct request *rq) * start_request - start of I/O and command issuing for IDE * * start_request() initiates handling of a new I/O request. It - * accepts commands and I/O (read/write) requests. It also does - * the final remapping for weird stuff like EZDrive. Once - * device mapper can work sector level the EZDrive stuff can go away + * accepts commands and I/O (read/write) requests. * * FIXME: this function needs a rename */ @@ -776,7 +765,6 @@ static void ide_check_pm_state(ide_drive_t *drive, struct request *rq) static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) { ide_startstop_t startstop; - sector_t block; BUG_ON(!blk_rq_started(rq)); @@ -791,21 +779,12 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) goto kill_rq; } - block = rq->sector; - if (blk_fs_request(rq) && - (drive->media == ide_disk || drive->media == ide_floppy)) { - block += drive->sect0; - } - /* Yecch - this will shift the entire interval, - possibly killing some innocent following sector */ - if (block == 0 && drive->remap_0_to_1 == 1) - block = 1; /* redirect MBR access to EZ-Drive partn table */ - if (blk_pm_request(rq)) ide_check_pm_state(drive, rq); SELECT_DRIVE(drive); - if (ide_wait_stat(&startstop, drive, drive->ready_stat, BUSY_STAT|DRQ_STAT, WAIT_READY)) { + if (ide_wait_stat(&startstop, drive, drive->ready_stat, + ATA_BUSY | ATA_DRQ, WAIT_READY)) { printk(KERN_ERR "%s: drive not ready for command\n", drive->name); return startstop; } @@ -829,7 +808,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) #endif startstop = ide_start_power_step(drive, rq); if (startstop == ide_stopped && - pm->pm_step == ide_pm_state_completed) + pm->pm_step == IDE_PM_COMPLETED) ide_complete_pm_request(drive, rq); return startstop; } else if (!rq->rq_disk && blk_special_request(rq)) @@ -844,7 +823,8 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) return ide_special_rq(drive, rq); drv = *(ide_driver_t **)rq->rq_disk->private_data; - return drv->do_request(drive, rq, block); + + return drv->do_request(drive, rq, rq->sector); } return do_special(drive); kill_rq: @@ -866,7 +846,7 @@ void ide_stall_queue (ide_drive_t *drive, unsigned long timeout) if (timeout > WAIT_WORSTCASE) timeout = WAIT_WORSTCASE; drive->sleep = timeout + jiffies; - drive->sleeping = 1; + drive->dev_flags |= IDE_DFLAG_SLEEPING; } EXPORT_SYMBOL(ide_stall_queue); @@ -906,18 +886,23 @@ repeat: } do { - if ((!drive->sleeping || time_after_eq(jiffies, drive->sleep)) - && !elv_queue_empty(drive->queue)) { - if (!best - || (drive->sleeping && (!best->sleeping || time_before(drive->sleep, best->sleep))) - || (!best->sleeping && time_before(WAKEUP(drive), WAKEUP(best)))) - { + u8 dev_s = !!(drive->dev_flags & IDE_DFLAG_SLEEPING); + u8 best_s = (best && !!(best->dev_flags & IDE_DFLAG_SLEEPING)); + + if ((dev_s == 0 || time_after_eq(jiffies, drive->sleep)) && + !elv_queue_empty(drive->queue)) { + if (best == NULL || + (dev_s && (best_s == 0 || time_before(drive->sleep, best->sleep))) || + (best_s == 0 && time_before(WAKEUP(drive), WAKEUP(best)))) { if (!blk_queue_plugged(drive->queue)) best = drive; } } } while ((drive = drive->next) != hwgroup->drive); - if (best && best->nice1 && !best->sleeping && best != hwgroup->drive && best->service_time > WAIT_MIN_SLEEP) { + + if (best && (best->dev_flags & IDE_DFLAG_NICE1) && + (best->dev_flags & IDE_DFLAG_SLEEPING) == 0 && + best != hwgroup->drive && best->service_time > WAIT_MIN_SLEEP) { long t = (signed long)(WAKEUP(best) - jiffies); if (t >= WAIT_MIN_SLEEP) { /* @@ -926,7 +911,7 @@ repeat: */ drive = best->next; do { - if (!drive->sleeping + if ((drive->dev_flags & IDE_DFLAG_SLEEPING) == 0 && time_before(jiffies - best->service_time, WAKEUP(drive)) && time_before(WAKEUP(drive), jiffies + t)) { @@ -997,7 +982,9 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq) hwgroup->rq = NULL; drive = hwgroup->drive; do { - if (drive->sleeping && (!sleeping || time_before(drive->sleep, sleep))) { + if ((drive->dev_flags & IDE_DFLAG_SLEEPING) && + (sleeping == 0 || + time_before(drive->sleep, sleep))) { sleeping = 1; sleep = drive->sleep; } @@ -1046,7 +1033,7 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq) } hwgroup->hwif = hwif; hwgroup->drive = drive; - drive->sleeping = 0; + drive->dev_flags &= ~(IDE_DFLAG_SLEEPING | IDE_DFLAG_PARKED); drive->service_start = jiffies; if (blk_queue_plugged(drive->queue)) { @@ -1080,7 +1067,9 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq) * We count how many times we loop here to make sure we service * all drives in the hwgroup without looping for ever */ - if (drive->blocked && !blk_pm_request(rq) && !(rq->cmd_flags & REQ_PREEMPT)) { + if ((drive->dev_flags & IDE_DFLAG_BLOCKED) && + blk_pm_request(rq) == 0 && + (rq->cmd_flags & REQ_PREEMPT) == 0) { drive = drive->next ? drive->next : hwgroup->drive; if (loops++ < 4 && !blk_queue_plugged(drive->queue)) goto again; @@ -1153,8 +1142,8 @@ static ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) * a timeout -- we'll reenable after we finish this next request * (or rather the first chunk of it) in pio. */ + drive->dev_flags |= IDE_DFLAG_DMA_PIO_RETRY; drive->retry_pio++; - drive->state = DMA_PIO_RETRY; ide_dma_off_quietly(drive); /* @@ -1325,7 +1314,7 @@ static void unexpected_intr (int irq, ide_hwgroup_t *hwgroup) if (hwif->irq == irq) { stat = hwif->tp_ops->read_status(hwif); - if (!OK_STAT(stat, READY_STAT, BAD_STAT)) { + if (!OK_STAT(stat, ATA_DRDY, BAD_STAT)) { /* Try to not flood the console with msgs */ static unsigned long last_msgtime, count; ++count; @@ -1451,23 +1440,16 @@ irqreturn_t ide_intr (int irq, void *dev_id) del_timer(&hwgroup->timer); spin_unlock(&ide_lock); - /* Some controllers might set DMA INTR no matter DMA or PIO; - * bmdma status might need to be cleared even for - * PIO interrupts to prevent spurious/lost irq. - */ - if (hwif->ide_dma_clear_irq && !(drive->waiting_for_dma)) - /* ide_dma_end() needs bmdma status for error checking. - * So, skip clearing bmdma status here and leave it - * to ide_dma_end() if this is dma interrupt. - */ - hwif->ide_dma_clear_irq(drive); + if (hwif->port_ops && hwif->port_ops->clear_irq) + hwif->port_ops->clear_irq(drive); - if (drive->unmask) + if (drive->dev_flags & IDE_DFLAG_UNMASK) local_irq_enable_in_hardirq(); + /* service this interrupt, may set handler for next interrupt */ startstop = handler(drive); - spin_lock_irq(&ide_lock); + spin_lock_irq(&ide_lock); /* * Note that handler() may have set things up for another * interrupt to occur soon, but it cannot happen until diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c new file mode 100644 index 00000000000..a90945f4979 --- /dev/null +++ b/drivers/ide/ide-ioctls.c @@ -0,0 +1,299 @@ +/* + * IDE ioctls handling. + */ + +#include <linux/hdreg.h> +#include <linux/ide.h> + +static const struct ide_ioctl_devset ide_ioctl_settings[] = { +{ HDIO_GET_32BIT, HDIO_SET_32BIT, &ide_devset_io_32bit }, +{ HDIO_GET_KEEPSETTINGS, HDIO_SET_KEEPSETTINGS, &ide_devset_keepsettings }, +{ HDIO_GET_UNMASKINTR, HDIO_SET_UNMASKINTR, &ide_devset_unmaskirq }, +{ HDIO_GET_DMA, HDIO_SET_DMA, &ide_devset_using_dma }, +{ -1, HDIO_SET_PIO_MODE, &ide_devset_pio_mode }, +{ 0 } +}; + +int ide_setting_ioctl(ide_drive_t *drive, struct block_device *bdev, + unsigned int cmd, unsigned long arg, + const struct ide_ioctl_devset *s) +{ + const struct ide_devset *ds; + unsigned long flags; + int err = -EOPNOTSUPP; + + for (; (ds = s->setting); s++) { + if (ds->get && s->get_ioctl == cmd) + goto read_val; + else if (ds->set && s->set_ioctl == cmd) + goto set_val; + } + + return err; + +read_val: + mutex_lock(&ide_setting_mtx); + spin_lock_irqsave(&ide_lock, flags); + err = ds->get(drive); + spin_unlock_irqrestore(&ide_lock, flags); + mutex_unlock(&ide_setting_mtx); + return err >= 0 ? put_user(err, (long __user *)arg) : err; + +set_val: + if (bdev != bdev->bd_contains) + err = -EINVAL; + else { + if (!capable(CAP_SYS_ADMIN)) + err = -EACCES; + else { + mutex_lock(&ide_setting_mtx); + err = ide_devset_execute(drive, ds, arg); + mutex_unlock(&ide_setting_mtx); + } + } + return err; +} +EXPORT_SYMBOL_GPL(ide_setting_ioctl); + +static int ide_get_identity_ioctl(ide_drive_t *drive, unsigned int cmd, + unsigned long arg) +{ + u16 *id = NULL; + int size = (cmd == HDIO_GET_IDENTITY) ? (ATA_ID_WORDS * 2) : 142; + int rc = 0; + + if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) { + rc = -ENOMSG; + goto out; + } + + id = kmalloc(size, GFP_KERNEL); + if (id == NULL) { + rc = -ENOMEM; + goto out; + } + + memcpy(id, drive->id, size); + ata_id_to_hd_driveid(id); + + if (copy_to_user((void __user *)arg, id, size)) + rc = -EFAULT; + + kfree(id); +out: + return rc; +} + +static int ide_get_nice_ioctl(ide_drive_t *drive, unsigned long arg) +{ + return put_user((!!(drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) + << IDE_NICE_DSC_OVERLAP) | + (!!(drive->dev_flags & IDE_DFLAG_NICE1) + << IDE_NICE_1), (long __user *)arg); +} + +static int ide_set_nice_ioctl(ide_drive_t *drive, unsigned long arg) +{ + if (arg != (arg & ((1 << IDE_NICE_DSC_OVERLAP) | (1 << IDE_NICE_1)))) + return -EPERM; + + if (((arg >> IDE_NICE_DSC_OVERLAP) & 1) && + (drive->media == ide_disk || drive->media == ide_floppy || + (drive->dev_flags & IDE_DFLAG_SCSI))) + return -EPERM; + + if ((arg >> IDE_NICE_DSC_OVERLAP) & 1) + drive->dev_flags |= IDE_DFLAG_DSC_OVERLAP; + else + drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP; + + if ((arg >> IDE_NICE_1) & 1) + drive->dev_flags |= IDE_DFLAG_NICE1; + else + drive->dev_flags &= ~IDE_DFLAG_NICE1; + + return 0; +} + +static int ide_cmd_ioctl(ide_drive_t *drive, unsigned cmd, unsigned long arg) +{ + u8 *buf = NULL; + int bufsize = 0, err = 0; + u8 args[4], xfer_rate = 0; + ide_task_t tfargs; + struct ide_taskfile *tf = &tfargs.tf; + u16 *id = drive->id; + + if (NULL == (void *) arg) { + struct request *rq; + + rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_ATA_TASKFILE; + err = blk_execute_rq(drive->queue, NULL, rq, 0); + blk_put_request(rq); + + return err; + } + + if (copy_from_user(args, (void __user *)arg, 4)) + return -EFAULT; + + memset(&tfargs, 0, sizeof(ide_task_t)); + tf->feature = args[2]; + if (args[0] == ATA_CMD_SMART) { + tf->nsect = args[3]; + tf->lbal = args[1]; + tf->lbam = 0x4f; + tf->lbah = 0xc2; + tfargs.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_IN_NSECT; + } else { + tf->nsect = args[1]; + tfargs.tf_flags = IDE_TFLAG_OUT_FEATURE | + IDE_TFLAG_OUT_NSECT | IDE_TFLAG_IN_NSECT; + } + tf->command = args[0]; + tfargs.data_phase = args[3] ? TASKFILE_IN : TASKFILE_NO_DATA; + + if (args[3]) { + tfargs.tf_flags |= IDE_TFLAG_IO_16BIT; + bufsize = SECTOR_SIZE * args[3]; + buf = kzalloc(bufsize, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + } + + if (tf->command == ATA_CMD_SET_FEATURES && + tf->feature == SETFEATURES_XFER && + tf->nsect >= XFER_SW_DMA_0 && + (id[ATA_ID_UDMA_MODES] || + id[ATA_ID_MWDMA_MODES] || + id[ATA_ID_SWDMA_MODES])) { + xfer_rate = args[1]; + if (tf->nsect > XFER_UDMA_2 && !eighty_ninty_three(drive)) { + printk(KERN_WARNING "%s: UDMA speeds >UDMA33 cannot " + "be set\n", drive->name); + goto abort; + } + } + + err = ide_raw_taskfile(drive, &tfargs, buf, args[3]); + + args[0] = tf->status; + args[1] = tf->error; + args[2] = tf->nsect; + + if (!err && xfer_rate) { + /* active-retuning-calls future */ + ide_set_xfer_rate(drive, xfer_rate); + ide_driveid_update(drive); + } +abort: + if (copy_to_user((void __user *)arg, &args, 4)) + err = -EFAULT; + if (buf) { + if (copy_to_user((void __user *)(arg + 4), buf, bufsize)) + err = -EFAULT; + kfree(buf); + } + return err; +} + +static int ide_task_ioctl(ide_drive_t *drive, unsigned cmd, unsigned long arg) +{ + void __user *p = (void __user *)arg; + int err = 0; + u8 args[7]; + ide_task_t task; + + if (copy_from_user(args, p, 7)) + return -EFAULT; + + memset(&task, 0, sizeof(task)); + memcpy(&task.tf_array[7], &args[1], 6); + task.tf.command = args[0]; + task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + + err = ide_no_data_taskfile(drive, &task); + + args[0] = task.tf.command; + memcpy(&args[1], &task.tf_array[7], 6); + + if (copy_to_user(p, args, 7)) + err = -EFAULT; + + return err; +} + +static int generic_drive_reset(ide_drive_t *drive) +{ + struct request *rq; + int ret = 0; + + rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_SPECIAL; + rq->cmd_len = 1; + rq->cmd[0] = REQ_DRIVE_RESET; + rq->cmd_flags |= REQ_SOFTBARRIER; + if (blk_execute_rq(drive->queue, NULL, rq, 1)) + ret = rq->errors; + blk_put_request(rq); + return ret; +} + +int generic_ide_ioctl(ide_drive_t *drive, struct file *file, + struct block_device *bdev, + unsigned int cmd, unsigned long arg) +{ + int err; + + err = ide_setting_ioctl(drive, bdev, cmd, arg, ide_ioctl_settings); + if (err != -EOPNOTSUPP) + return err; + + switch (cmd) { + case HDIO_OBSOLETE_IDENTITY: + case HDIO_GET_IDENTITY: + if (bdev != bdev->bd_contains) + return -EINVAL; + return ide_get_identity_ioctl(drive, cmd, arg); + case HDIO_GET_NICE: + return ide_get_nice_ioctl(drive, arg); + case HDIO_SET_NICE: + if (!capable(CAP_SYS_ADMIN)) + return -EACCES; + return ide_set_nice_ioctl(drive, arg); +#ifdef CONFIG_IDE_TASK_IOCTL + case HDIO_DRIVE_TASKFILE: + if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) + return -EACCES; + if (drive->media == ide_disk) + return ide_taskfile_ioctl(drive, cmd, arg); + return -ENOMSG; +#endif + case HDIO_DRIVE_CMD: + if (!capable(CAP_SYS_RAWIO)) + return -EACCES; + return ide_cmd_ioctl(drive, cmd, arg); + case HDIO_DRIVE_TASK: + if (!capable(CAP_SYS_RAWIO)) + return -EACCES; + return ide_task_ioctl(drive, cmd, arg); + case HDIO_DRIVE_RESET: + if (!capable(CAP_SYS_ADMIN)) + return -EACCES; + return generic_drive_reset(drive); + case HDIO_GET_BUSSTATE: + if (!capable(CAP_SYS_ADMIN)) + return -EACCES; + if (put_user(BUSSTATE_ON, (long __user *)arg)) + return -EFAULT; + return 0; + case HDIO_SET_BUSSTATE: + if (!capable(CAP_SYS_ADMIN)) + return -EACCES; + return -EOPNOTSUPP; + default: + return -EINVAL; + } +} +EXPORT_SYMBOL(generic_ide_ioctl); diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 2cbadffe922..b762deb2dac 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -18,7 +18,6 @@ #include <linux/slab.h> #include <linux/pci.h> #include <linux/delay.h> -#include <linux/hdreg.h> #include <linux/ide.h> #include <linux/bitops.h> #include <linux/nmi.h> @@ -182,7 +181,7 @@ void ide_tf_load(ide_drive_t *drive, ide_task_t *task) tf_outb(tf->lbah, io_ports->lbah_addr); if (task->tf_flags & IDE_TFLAG_OUT_DEVICE) - tf_outb((tf->device & HIHI) | drive->select.all, + tf_outb((tf->device & HIHI) | drive->select, io_ports->device_addr); } EXPORT_SYMBOL_GPL(ide_tf_load); @@ -400,97 +399,14 @@ const struct ide_tp_ops default_tp_ops = { .output_data = ide_output_data, }; -void ide_fix_driveid (struct hd_driveid *id) +void ide_fix_driveid(u16 *id) { #ifndef __LITTLE_ENDIAN # ifdef __BIG_ENDIAN int i; - u16 *stringcast; - - id->config = __le16_to_cpu(id->config); - id->cyls = __le16_to_cpu(id->cyls); - id->reserved2 = __le16_to_cpu(id->reserved2); - id->heads = __le16_to_cpu(id->heads); - id->track_bytes = __le16_to_cpu(id->track_bytes); - id->sector_bytes = __le16_to_cpu(id->sector_bytes); - id->sectors = __le16_to_cpu(id->sectors); - id->vendor0 = __le16_to_cpu(id->vendor0); - id->vendor1 = __le16_to_cpu(id->vendor1); - id->vendor2 = __le16_to_cpu(id->vendor2); - stringcast = (u16 *)&id->serial_no[0]; - for (i = 0; i < (20/2); i++) - stringcast[i] = __le16_to_cpu(stringcast[i]); - id->buf_type = __le16_to_cpu(id->buf_type); - id->buf_size = __le16_to_cpu(id->buf_size); - id->ecc_bytes = __le16_to_cpu(id->ecc_bytes); - stringcast = (u16 *)&id->fw_rev[0]; - for (i = 0; i < (8/2); i++) - stringcast[i] = __le16_to_cpu(stringcast[i]); - stringcast = (u16 *)&id->model[0]; - for (i = 0; i < (40/2); i++) - stringcast[i] = __le16_to_cpu(stringcast[i]); - id->dword_io = __le16_to_cpu(id->dword_io); - id->reserved50 = __le16_to_cpu(id->reserved50); - id->field_valid = __le16_to_cpu(id->field_valid); - id->cur_cyls = __le16_to_cpu(id->cur_cyls); - id->cur_heads = __le16_to_cpu(id->cur_heads); - id->cur_sectors = __le16_to_cpu(id->cur_sectors); - id->cur_capacity0 = __le16_to_cpu(id->cur_capacity0); - id->cur_capacity1 = __le16_to_cpu(id->cur_capacity1); - id->lba_capacity = __le32_to_cpu(id->lba_capacity); - id->dma_1word = __le16_to_cpu(id->dma_1word); - id->dma_mword = __le16_to_cpu(id->dma_mword); - id->eide_pio_modes = __le16_to_cpu(id->eide_pio_modes); - id->eide_dma_min = __le16_to_cpu(id->eide_dma_min); - id->eide_dma_time = __le16_to_cpu(id->eide_dma_time); - id->eide_pio = __le16_to_cpu(id->eide_pio); - id->eide_pio_iordy = __le16_to_cpu(id->eide_pio_iordy); - for (i = 0; i < 2; ++i) - id->words69_70[i] = __le16_to_cpu(id->words69_70[i]); - for (i = 0; i < 4; ++i) - id->words71_74[i] = __le16_to_cpu(id->words71_74[i]); - id->queue_depth = __le16_to_cpu(id->queue_depth); - for (i = 0; i < 4; ++i) - id->words76_79[i] = __le16_to_cpu(id->words76_79[i]); - id->major_rev_num = __le16_to_cpu(id->major_rev_num); - id->minor_rev_num = __le16_to_cpu(id->minor_rev_num); - id->command_set_1 = __le16_to_cpu(id->command_set_1); - id->command_set_2 = __le16_to_cpu(id->command_set_2); - id->cfsse = __le16_to_cpu(id->cfsse); - id->cfs_enable_1 = __le16_to_cpu(id->cfs_enable_1); - id->cfs_enable_2 = __le16_to_cpu(id->cfs_enable_2); - id->csf_default = __le16_to_cpu(id->csf_default); - id->dma_ultra = __le16_to_cpu(id->dma_ultra); - id->trseuc = __le16_to_cpu(id->trseuc); - id->trsEuc = __le16_to_cpu(id->trsEuc); - id->CurAPMvalues = __le16_to_cpu(id->CurAPMvalues); - id->mprc = __le16_to_cpu(id->mprc); - id->hw_config = __le16_to_cpu(id->hw_config); - id->acoustic = __le16_to_cpu(id->acoustic); - id->msrqs = __le16_to_cpu(id->msrqs); - id->sxfert = __le16_to_cpu(id->sxfert); - id->sal = __le16_to_cpu(id->sal); - id->spg = __le32_to_cpu(id->spg); - id->lba_capacity_2 = __le64_to_cpu(id->lba_capacity_2); - for (i = 0; i < 22; i++) - id->words104_125[i] = __le16_to_cpu(id->words104_125[i]); - id->last_lun = __le16_to_cpu(id->last_lun); - id->word127 = __le16_to_cpu(id->word127); - id->dlf = __le16_to_cpu(id->dlf); - id->csfo = __le16_to_cpu(id->csfo); - for (i = 0; i < 26; i++) - id->words130_155[i] = __le16_to_cpu(id->words130_155[i]); - id->word156 = __le16_to_cpu(id->word156); - for (i = 0; i < 3; i++) - id->words157_159[i] = __le16_to_cpu(id->words157_159[i]); - id->cfa_power = __le16_to_cpu(id->cfa_power); - for (i = 0; i < 15; i++) - id->words161_175[i] = __le16_to_cpu(id->words161_175[i]); - for (i = 0; i < 30; i++) - id->words176_205[i] = __le16_to_cpu(id->words176_205[i]); - for (i = 0; i < 49; i++) - id->words206_254[i] = __le16_to_cpu(id->words206_254[i]); - id->integrity_word = __le16_to_cpu(id->integrity_word); + + for (i = 0; i < 256; i++) + id[i] = __le16_to_cpu(id[i]); # else # error "Please fix <asm/byteorder.h>" # endif @@ -501,19 +417,21 @@ void ide_fix_driveid (struct hd_driveid *id) * ide_fixstring() cleans up and (optionally) byte-swaps a text string, * removing leading/trailing blanks and compressing internal blanks. * It is primarily used to tidy up the model name/number fields as - * returned by the WIN_[P]IDENTIFY commands. + * returned by the ATA_CMD_ID_ATA[PI] commands. */ void ide_fixstring (u8 *s, const int bytecount, const int byteswap) { - u8 *p = s, *end = &s[bytecount & ~1]; /* bytecount must be even */ + u8 *p, *end = &s[bytecount & ~1]; /* bytecount must be even */ if (byteswap) { /* convert from big-endian to host byte order */ - for (p = end ; p != s;) - be16_to_cpus((u16 *)(p -= 2)); + for (p = s ; p != end ; p += 2) + be16_to_cpus((u16 *) p); } + /* strip leading blanks */ + p = s; while (s != end && *s == ' ') ++s; /* compress internal blanks and strip trailing blanks */ @@ -556,7 +474,7 @@ int drive_is_ready (ide_drive_t *drive) /* Note: this may clear a pending IRQ!! */ stat = hwif->tp_ops->read_status(hwif); - if (stat & BUSY_STAT) + if (stat & ATA_BUSY) /* drive busy: definitely not interrupting */ return 0; @@ -588,10 +506,10 @@ static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long ti udelay(1); /* spec allows drive 400ns to assert "BUSY" */ stat = tp_ops->read_status(hwif); - if (stat & BUSY_STAT) { + if (stat & ATA_BUSY) { local_irq_set(flags); timeout += jiffies; - while ((stat = tp_ops->read_status(hwif)) & BUSY_STAT) { + while ((stat = tp_ops->read_status(hwif)) & ATA_BUSY) { if (time_after(jiffies, timeout)) { /* * One last read after the timeout in case @@ -599,7 +517,7 @@ static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long ti * progress during the timeout.. */ stat = tp_ops->read_status(hwif); - if (!(stat & BUSY_STAT)) + if ((stat & ATA_BUSY) == 0) break; local_irq_restore(flags); @@ -660,18 +578,18 @@ EXPORT_SYMBOL(ide_wait_stat); /** * ide_in_drive_list - look for drive in black/white list * @id: drive identifier - * @drive_table: list to inspect + * @table: list to inspect * * Look for a drive in the blacklist and the whitelist tables * Returns 1 if the drive is found in the table. */ -int ide_in_drive_list(struct hd_driveid *id, const struct drive_list_entry *drive_table) +int ide_in_drive_list(u16 *id, const struct drive_list_entry *table) { - for ( ; drive_table->id_model; drive_table++) - if ((!strcmp(drive_table->id_model, id->model)) && - (!drive_table->id_firmware || - strstr(id->fw_rev, drive_table->id_firmware))) + for ( ; table->id_model; table++) + if ((!strcmp(table->id_model, (char *)&id[ATA_ID_PROD])) && + (!table->id_firmware || + strstr((char *)&id[ATA_ID_FW_REV], table->id_firmware))) return 1; return 0; } @@ -702,7 +620,7 @@ static const struct drive_list_entry ivb_list[] = { u8 eighty_ninty_three (ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - struct hd_driveid *id = drive->id; + u16 *id = drive->id; int ivb = ide_in_drive_list(id, ivb_list); if (hwif->cbl == ATA_CBL_PATA40_SHORT) @@ -712,7 +630,7 @@ u8 eighty_ninty_three (ide_drive_t *drive) printk(KERN_DEBUG "%s: skipping word 93 validity check\n", drive->name); - if (ide_dev_is_sata(id) && !ivb) + if (ata_id_is_sata(id) && !ivb) return 1; if (hwif->cbl != ATA_CBL_PATA80 && !ivb) @@ -724,11 +642,12 @@ u8 eighty_ninty_three (ide_drive_t *drive) * - force bit13 (80c cable present) check also for !ivb devices * (unless the slave device is pre-ATA3) */ - if ((id->hw_config & 0x4000) || (ivb && (id->hw_config & 0x2000))) + if ((id[ATA_ID_HW_CONFIG] & 0x4000) || + (ivb && (id[ATA_ID_HW_CONFIG] & 0x2000))) return 1; no_80w: - if (drive->udma33_warned == 1) + if (drive->dev_flags & IDE_DFLAG_UDMA33_WARNED) return 0; printk(KERN_WARNING "%s: %s side 80-wire cable detection failed, " @@ -736,7 +655,7 @@ no_80w: drive->name, hwif->cbl == ATA_CBL_PATA80 ? "drive" : "host"); - drive->udma33_warned = 1; + drive->dev_flags |= IDE_DFLAG_UDMA33_WARNED; return 0; } @@ -745,8 +664,8 @@ int ide_driveid_update(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; const struct ide_tp_ops *tp_ops = hwif->tp_ops; - struct hd_driveid *id; - unsigned long timeout, flags; + u16 *id; + unsigned long flags; u8 stat; /* @@ -757,29 +676,24 @@ int ide_driveid_update(ide_drive_t *drive) SELECT_MASK(drive, 1); tp_ops->set_irq(hwif, 0); msleep(50); - tp_ops->exec_command(hwif, WIN_IDENTIFY); - timeout = jiffies + WAIT_WORSTCASE; - do { - if (time_after(jiffies, timeout)) { - SELECT_MASK(drive, 0); - return 0; /* drive timed-out */ - } + tp_ops->exec_command(hwif, ATA_CMD_ID_ATA); - msleep(50); /* give drive a breather */ - stat = tp_ops->read_altstatus(hwif); - } while (stat & BUSY_STAT); + if (ide_busy_sleep(hwif, WAIT_WORSTCASE, 1)) { + SELECT_MASK(drive, 0); + return 0; + } - msleep(50); /* wait for IRQ and DRQ_STAT */ + msleep(50); /* wait for IRQ and ATA_DRQ */ stat = tp_ops->read_status(hwif); - if (!OK_STAT(stat, DRQ_STAT, BAD_R_STAT)) { + if (!OK_STAT(stat, ATA_DRQ, BAD_R_STAT)) { SELECT_MASK(drive, 0); printk("%s: CHECK for good STATUS\n", drive->name); return 0; } local_irq_save(flags); SELECT_MASK(drive, 0); - id = kmalloc(SECTOR_WORDS*4, GFP_ATOMIC); + id = kmalloc(SECTOR_SIZE, GFP_ATOMIC); if (!id) { local_irq_restore(flags); return 0; @@ -789,16 +703,16 @@ int ide_driveid_update(ide_drive_t *drive) local_irq_enable(); local_irq_restore(flags); ide_fix_driveid(id); - if (id) { - drive->id->dma_ultra = id->dma_ultra; - drive->id->dma_mword = id->dma_mword; - drive->id->dma_1word = id->dma_1word; - /* anything more ? */ - kfree(id); - - if (drive->using_dma && ide_id_dma_bug(drive)) - ide_dma_off(drive); - } + + drive->id[ATA_ID_UDMA_MODES] = id[ATA_ID_UDMA_MODES]; + drive->id[ATA_ID_MWDMA_MODES] = id[ATA_ID_MWDMA_MODES]; + drive->id[ATA_ID_SWDMA_MODES] = id[ATA_ID_SWDMA_MODES]; + /* anything more ? */ + + kfree(id); + + if ((drive->dev_flags & IDE_DFLAG_USING_DMA) && ide_id_dma_bug(drive)) + ide_dma_off(drive); return 1; } @@ -807,6 +721,7 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) { ide_hwif_t *hwif = drive->hwif; const struct ide_tp_ops *tp_ops = hwif->tp_ops; + u16 *id = drive->id, i; int error = 0; u8 stat; ide_task_t task; @@ -817,7 +732,7 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) #endif /* Skip setting PIO flow-control modes on pre-EIDE drives */ - if ((speed & 0xf8) == XFER_PIO_0 && !(drive->id->capability & 0x08)) + if ((speed & 0xf8) == XFER_PIO_0 && ata_id_has_iordy(drive->id) == 0) goto skip; /* @@ -851,13 +766,13 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) tp_ops->tf_load(drive, &task); - tp_ops->exec_command(hwif, WIN_SETFEATURES); + tp_ops->exec_command(hwif, ATA_CMD_SET_FEATURES); if (drive->quirk_list == 2) tp_ops->set_irq(hwif, 1); error = __ide_wait_stat(drive, drive->ready_stat, - BUSY_STAT|DRQ_STAT|ERR_STAT, + ATA_BUSY | ATA_DRQ | ATA_ERR, WAIT_CMD, &stat); SELECT_MASK(drive, 0); @@ -869,35 +784,29 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) return error; } - drive->id->dma_ultra &= ~0xFF00; - drive->id->dma_mword &= ~0x0F00; - drive->id->dma_1word &= ~0x0F00; + id[ATA_ID_UDMA_MODES] &= ~0xFF00; + id[ATA_ID_MWDMA_MODES] &= ~0x0F00; + id[ATA_ID_SWDMA_MODES] &= ~0x0F00; skip: #ifdef CONFIG_BLK_DEV_IDEDMA - if (speed >= XFER_SW_DMA_0 && drive->using_dma) + if (speed >= XFER_SW_DMA_0 && (drive->dev_flags & IDE_DFLAG_USING_DMA)) hwif->dma_ops->dma_host_set(drive, 1); else if (hwif->dma_ops) /* check if host supports DMA */ ide_dma_off_quietly(drive); #endif - switch(speed) { - case XFER_UDMA_7: drive->id->dma_ultra |= 0x8080; break; - case XFER_UDMA_6: drive->id->dma_ultra |= 0x4040; break; - case XFER_UDMA_5: drive->id->dma_ultra |= 0x2020; break; - case XFER_UDMA_4: drive->id->dma_ultra |= 0x1010; break; - case XFER_UDMA_3: drive->id->dma_ultra |= 0x0808; break; - case XFER_UDMA_2: drive->id->dma_ultra |= 0x0404; break; - case XFER_UDMA_1: drive->id->dma_ultra |= 0x0202; break; - case XFER_UDMA_0: drive->id->dma_ultra |= 0x0101; break; - case XFER_MW_DMA_2: drive->id->dma_mword |= 0x0404; break; - case XFER_MW_DMA_1: drive->id->dma_mword |= 0x0202; break; - case XFER_MW_DMA_0: drive->id->dma_mword |= 0x0101; break; - case XFER_SW_DMA_2: drive->id->dma_1word |= 0x0404; break; - case XFER_SW_DMA_1: drive->id->dma_1word |= 0x0202; break; - case XFER_SW_DMA_0: drive->id->dma_1word |= 0x0101; break; - default: break; + if (speed >= XFER_UDMA_0) { + i = 1 << (speed - XFER_UDMA_0); + id[ATA_ID_UDMA_MODES] |= (i << 8 | i); + } else if (speed >= XFER_MW_DMA_0) { + i = 1 << (speed - XFER_MW_DMA_0); + id[ATA_ID_MWDMA_MODES] |= (i << 8 | i); + } else if (speed >= XFER_SW_DMA_0) { + i = 1 << (speed - XFER_SW_DMA_0); + id[ATA_ID_SWDMA_MODES] |= (i << 8 | i); } + if (!drive->init_speed) drive->init_speed = speed; drive->current_speed = speed; @@ -977,7 +886,7 @@ void ide_execute_pkt_cmd(ide_drive_t *drive) unsigned long flags; spin_lock_irqsave(&ide_lock, flags); - hwif->tp_ops->exec_command(hwif, WIN_PACKETCMD); + hwif->tp_ops->exec_command(hwif, ATA_CMD_PACKET); ndelay(400); spin_unlock_irqrestore(&ide_lock, flags); } @@ -1010,7 +919,7 @@ static ide_startstop_t atapi_reset_pollfunc (ide_drive_t *drive) udelay (10); stat = hwif->tp_ops->read_status(hwif); - if (OK_STAT(stat, 0, BUSY_STAT)) + if (OK_STAT(stat, 0, ATA_BUSY)) printk("%s: ATAPI reset complete\n", drive->name); else { if (time_before(jiffies, hwgroup->poll_timeout)) { @@ -1031,6 +940,25 @@ static ide_startstop_t atapi_reset_pollfunc (ide_drive_t *drive) return ide_stopped; } +static void ide_reset_report_error(ide_hwif_t *hwif, u8 err) +{ + static const char *err_master_vals[] = + { NULL, "passed", "formatter device error", + "sector buffer error", "ECC circuitry error", + "controlling MPU error" }; + + u8 err_master = err & 0x7f; + + printk(KERN_ERR "%s: reset: master: ", hwif->name); + if (err_master && err_master < 6) + printk(KERN_CONT "%s", err_master_vals[err_master]); + else + printk(KERN_CONT "error (0x%02x?)", err); + if (err & 0x80) + printk(KERN_CONT "; slave: failed"); + printk(KERN_CONT "\n"); +} + /* * reset_pollfunc() gets invoked to poll the interface for completion every 50ms * during an ide reset operation. If the drives have not yet responded, @@ -1056,7 +984,7 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive) tmp = hwif->tp_ops->read_status(hwif); - if (!OK_STAT(tmp, 0, BUSY_STAT)) { + if (!OK_STAT(tmp, 0, ATA_BUSY)) { if (time_before(jiffies, hwgroup->poll_timeout)) { ide_set_handler(drive, &reset_pollfunc, HZ/20, NULL); /* continue polling */ @@ -1066,31 +994,14 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive) drive->failures++; err = -EIO; } else { - printk("%s: reset: ", hwif->name); tmp = ide_read_error(drive); if (tmp == 1) { - printk("success\n"); + printk(KERN_INFO "%s: reset: success\n", hwif->name); drive->failures = 0; } else { + ide_reset_report_error(hwif, tmp); drive->failures++; - printk("master: "); - switch (tmp & 0x7f) { - case 1: printk("passed"); - break; - case 2: printk("formatter device error"); - break; - case 3: printk("sector buffer error"); - break; - case 4: printk("ECC circuitry error"); - break; - case 5: printk("controlling MPU error"); - break; - default:printk("error (0x%02x?)", tmp); - } - if (tmp & 0x80) - printk("; slave: failed"); - printk("\n"); err = -EIO; } } @@ -1102,14 +1013,19 @@ out: static void ide_disk_pre_reset(ide_drive_t *drive) { - int legacy = (drive->id->cfs_enable_2 & 0x0400) ? 0 : 1; + int legacy = (drive->id[ATA_ID_CFS_ENABLE_2] & 0x0400) ? 0 : 1; drive->special.all = 0; drive->special.b.set_geometry = legacy; drive->special.b.recalibrate = legacy; + drive->mult_count = 0; - if (!drive->keep_settings && !drive->using_dma) + drive->dev_flags &= ~IDE_DFLAG_PARKED; + + if ((drive->dev_flags & IDE_DFLAG_KEEP_SETTINGS) == 0 && + (drive->dev_flags & IDE_DFLAG_USING_DMA) == 0) drive->mult_req = 0; + if (drive->mult_req != drive->mult_count) drive->special.b.set_multmode = 1; } @@ -1121,18 +1037,18 @@ static void pre_reset(ide_drive_t *drive) if (drive->media == ide_disk) ide_disk_pre_reset(drive); else - drive->post_reset = 1; + drive->dev_flags |= IDE_DFLAG_POST_RESET; - if (drive->using_dma) { + if (drive->dev_flags & IDE_DFLAG_USING_DMA) { if (drive->crc_count) ide_check_dma_crc(drive); else ide_dma_off(drive); } - if (!drive->keep_settings) { - if (!drive->using_dma) { - drive->unmask = 0; + if ((drive->dev_flags & IDE_DFLAG_KEEP_SETTINGS) == 0) { + if ((drive->dev_flags & IDE_DFLAG_USING_DMA) == 0) { + drive->dev_flags &= ~IDE_DFLAG_UNMASK; drive->io_32bit = 0; } return; @@ -1164,12 +1080,13 @@ static void pre_reset(ide_drive_t *drive) static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) { unsigned int unit; - unsigned long flags; + unsigned long flags, timeout; ide_hwif_t *hwif; ide_hwgroup_t *hwgroup; struct ide_io_ports *io_ports; const struct ide_tp_ops *tp_ops; const struct ide_port_ops *port_ops; + DEFINE_WAIT(wait); spin_lock_irqsave(&ide_lock, flags); hwif = HWIF(drive); @@ -1187,7 +1104,7 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) pre_reset(drive); SELECT_DRIVE(drive); udelay (20); - tp_ops->exec_command(hwif, WIN_SRST); + tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET); ndelay(400); hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE; hwgroup->polling = 1; @@ -1196,6 +1113,31 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) return ide_started; } + /* We must not disturb devices in the IDE_DFLAG_PARKED state. */ + do { + unsigned long now; + + prepare_to_wait(&ide_park_wq, &wait, TASK_UNINTERRUPTIBLE); + timeout = jiffies; + for (unit = 0; unit < MAX_DRIVES; unit++) { + ide_drive_t *tdrive = &hwif->drives[unit]; + + if (tdrive->dev_flags & IDE_DFLAG_PRESENT && + tdrive->dev_flags & IDE_DFLAG_PARKED && + time_after(tdrive->sleep, timeout)) + timeout = tdrive->sleep; + } + + now = jiffies; + if (time_before_eq(timeout, now)) + break; + + spin_unlock_irqrestore(&ide_lock, flags); + timeout = schedule_timeout_uninterruptible(timeout - now); + spin_lock_irqsave(&ide_lock, flags); + } while (timeout); + finish_wait(&ide_park_wq, &wait); + /* * First, reset any device state data we were maintaining * for any of the drives on this interface. @@ -1270,7 +1212,7 @@ int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout) */ mdelay(1); stat = hwif->tp_ops->read_status(hwif); - if ((stat & BUSY_STAT) == 0) + if ((stat & ATA_BUSY) == 0) return 0; /* * Assume a value of 0xff means nothing is connected to diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 97fefabea8b..9fc4cfb2a27 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -2,7 +2,6 @@ #include <linux/string.h> #include <linux/kernel.h> #include <linux/interrupt.h> -#include <linux/hdreg.h> #include <linux/ide.h> #include <linux/bitops.h> @@ -90,29 +89,31 @@ static u8 ide_rate_filter(ide_drive_t *drive, u8 speed) u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode) { - int pio_mode; - struct hd_driveid* id = drive->id; - int overridden = 0; + u16 *id = drive->id; + int pio_mode = -1, overridden = 0; if (mode_wanted != 255) return min_t(u8, mode_wanted, max_mode); - if ((drive->hwif->host_flags & IDE_HFLAG_PIO_NO_BLACKLIST) == 0 && - (pio_mode = ide_scan_pio_blacklist(id->model)) != -1) { + if ((drive->hwif->host_flags & IDE_HFLAG_PIO_NO_BLACKLIST) == 0) + pio_mode = ide_scan_pio_blacklist((char *)&id[ATA_ID_PROD]); + + if (pio_mode != -1) { printk(KERN_INFO "%s: is on PIO blacklist\n", drive->name); } else { - pio_mode = id->tPIO; + pio_mode = id[ATA_ID_OLD_PIO_MODES] >> 8; if (pio_mode > 2) { /* 2 is maximum allowed tPIO value */ pio_mode = 2; overridden = 1; } - if (id->field_valid & 2) { /* drive implements ATA2? */ - if (id->capability & 8) { /* IORDY supported? */ - if (id->eide_pio_modes & 7) { + + if (id[ATA_ID_FIELD_VALID] & 2) { /* ATA2? */ + if (ata_id_has_iordy(id)) { + if (id[ATA_ID_PIO_MODES] & 7) { overridden = 0; - if (id->eide_pio_modes & 4) + if (id[ATA_ID_PIO_MODES] & 4) pio_mode = 5; - else if (id->eide_pio_modes & 2) + else if (id[ATA_ID_PIO_MODES] & 2) pio_mode = 4; else pio_mode = 3; @@ -316,7 +317,7 @@ static void ide_dump_sector(ide_drive_t *drive) { ide_task_t task; struct ide_taskfile *tf = &task.tf; - int lba48 = (drive->addressing == 1) ? 1 : 0; + u8 lba48 = !!(drive->dev_flags & IDE_DFLAG_LBA48); memset(&task, 0, sizeof(task)); if (lba48) @@ -338,16 +339,16 @@ static void ide_dump_sector(ide_drive_t *drive) static void ide_dump_ata_error(ide_drive_t *drive, u8 err) { printk("{ "); - if (err & ABRT_ERR) printk("DriveStatusError "); - if (err & ICRC_ERR) - printk((err & ABRT_ERR) ? "BadCRC " : "BadSector "); - if (err & ECC_ERR) printk("UncorrectableError "); - if (err & ID_ERR) printk("SectorIdNotFound "); - if (err & TRK0_ERR) printk("TrackZeroNotFound "); - if (err & MARK_ERR) printk("AddrMarkNotFound "); + if (err & ATA_ABORTED) printk("DriveStatusError "); + if (err & ATA_ICRC) + printk((err & ATA_ABORTED) ? "BadCRC " : "BadSector "); + if (err & ATA_UNC) printk("UncorrectableError "); + if (err & ATA_IDNF) printk("SectorIdNotFound "); + if (err & ATA_TRK0NF) printk("TrackZeroNotFound "); + if (err & ATA_AMNF) printk("AddrMarkNotFound "); printk("}"); - if ((err & (BBD_ERR | ABRT_ERR)) == BBD_ERR || - (err & (ECC_ERR|ID_ERR|MARK_ERR))) { + if ((err & (ATA_BBK | ATA_ABORTED)) == ATA_BBK || + (err & (ATA_UNC | ATA_IDNF | ATA_AMNF))) { ide_dump_sector(drive); if (HWGROUP(drive) && HWGROUP(drive)->rq) printk(", sector=%llu", @@ -359,12 +360,12 @@ static void ide_dump_ata_error(ide_drive_t *drive, u8 err) static void ide_dump_atapi_error(ide_drive_t *drive, u8 err) { printk("{ "); - if (err & ILI_ERR) printk("IllegalLengthIndication "); - if (err & EOM_ERR) printk("EndOfMedia "); - if (err & ABRT_ERR) printk("AbortedCommand "); - if (err & MCR_ERR) printk("MediaChangeRequested "); - if (err & LFS_ERR) printk("LastFailedSense=0x%02x ", - (err & LFS_ERR) >> 4); + if (err & ATAPI_ILI) printk("IllegalLengthIndication "); + if (err & ATAPI_EOM) printk("EndOfMedia "); + if (err & ATA_ABORTED) printk("AbortedCommand "); + if (err & ATA_MCR) printk("MediaChangeRequested "); + if (err & ATAPI_LFS) printk("LastFailedSense=0x%02x ", + (err & ATAPI_LFS) >> 4); printk("}\n"); } @@ -386,19 +387,19 @@ u8 ide_dump_status(ide_drive_t *drive, const char *msg, u8 stat) local_irq_save(flags); printk("%s: %s: status=0x%02x { ", drive->name, msg, stat); - if (stat & BUSY_STAT) + if (stat & ATA_BUSY) printk("Busy "); else { - if (stat & READY_STAT) printk("DriveReady "); - if (stat & WRERR_STAT) printk("DeviceFault "); - if (stat & SEEK_STAT) printk("SeekComplete "); - if (stat & DRQ_STAT) printk("DataRequest "); - if (stat & ECC_STAT) printk("CorrectedError "); - if (stat & INDEX_STAT) printk("Index "); - if (stat & ERR_STAT) printk("Error "); + if (stat & ATA_DRDY) printk("DriveReady "); + if (stat & ATA_DF) printk("DeviceFault "); + if (stat & ATA_DSC) printk("SeekComplete "); + if (stat & ATA_DRQ) printk("DataRequest "); + if (stat & ATA_CORR) printk("CorrectedError "); + if (stat & ATA_IDX) printk("Index "); + if (stat & ATA_ERR) printk("Error "); } printk("}\n"); - if ((stat & (BUSY_STAT|ERR_STAT)) == ERR_STAT) { + if ((stat & (ATA_BUSY | ATA_ERR)) == ATA_ERR) { err = ide_read_error(drive); printk("%s: %s: error=0x%02x ", drive->name, msg, err); if (drive->media == ide_disk) diff --git a/drivers/ide/ide-park.c b/drivers/ide/ide-park.c new file mode 100644 index 00000000000..03b00e57e93 --- /dev/null +++ b/drivers/ide/ide-park.c @@ -0,0 +1,121 @@ +#include <linux/kernel.h> +#include <linux/ide.h> +#include <linux/jiffies.h> +#include <linux/blkdev.h> + +DECLARE_WAIT_QUEUE_HEAD(ide_park_wq); + +static void issue_park_cmd(ide_drive_t *drive, unsigned long timeout) +{ + struct request_queue *q = drive->queue; + struct request *rq; + int rc; + + timeout += jiffies; + spin_lock_irq(&ide_lock); + if (drive->dev_flags & IDE_DFLAG_PARKED) { + ide_hwgroup_t *hwgroup = drive->hwif->hwgroup; + int reset_timer; + + reset_timer = time_before(timeout, drive->sleep); + drive->sleep = timeout; + wake_up_all(&ide_park_wq); + if (reset_timer && hwgroup->sleeping && + del_timer(&hwgroup->timer)) { + hwgroup->sleeping = 0; + hwgroup->busy = 0; + blk_start_queueing(q); + } + spin_unlock_irq(&ide_lock); + return; + } + spin_unlock_irq(&ide_lock); + + rq = blk_get_request(q, READ, __GFP_WAIT); + rq->cmd[0] = REQ_PARK_HEADS; + rq->cmd_len = 1; + rq->cmd_type = REQ_TYPE_SPECIAL; + rq->special = &timeout; + rc = blk_execute_rq(q, NULL, rq, 1); + blk_put_request(rq); + if (rc) + goto out; + + /* + * Make sure that *some* command is sent to the drive after the + * timeout has expired, so power management will be reenabled. + */ + rq = blk_get_request(q, READ, GFP_NOWAIT); + if (unlikely(!rq)) + goto out; + + rq->cmd[0] = REQ_UNPARK_HEADS; + rq->cmd_len = 1; + rq->cmd_type = REQ_TYPE_SPECIAL; + elv_add_request(q, rq, ELEVATOR_INSERT_FRONT, 1); + +out: + return; +} + +ssize_t ide_park_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + ide_drive_t *drive = to_ide_device(dev); + unsigned long now; + unsigned int msecs; + + if (drive->dev_flags & IDE_DFLAG_NO_UNLOAD) + return -EOPNOTSUPP; + + spin_lock_irq(&ide_lock); + now = jiffies; + if (drive->dev_flags & IDE_DFLAG_PARKED && + time_after(drive->sleep, now)) + msecs = jiffies_to_msecs(drive->sleep - now); + else + msecs = 0; + spin_unlock_irq(&ide_lock); + + return snprintf(buf, 20, "%u\n", msecs); +} + +ssize_t ide_park_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t len) +{ +#define MAX_PARK_TIMEOUT 30000 + ide_drive_t *drive = to_ide_device(dev); + long int input; + int rc; + + rc = strict_strtol(buf, 10, &input); + if (rc || input < -2) + return -EINVAL; + if (input > MAX_PARK_TIMEOUT) { + input = MAX_PARK_TIMEOUT; + rc = -EOVERFLOW; + } + + mutex_lock(&ide_setting_mtx); + if (input >= 0) { + if (drive->dev_flags & IDE_DFLAG_NO_UNLOAD) + rc = -EOPNOTSUPP; + else if (input || drive->dev_flags & IDE_DFLAG_PARKED) + issue_park_cmd(drive, msecs_to_jiffies(input)); + } else { + if (drive->media == ide_disk) + switch (input) { + case -1: + drive->dev_flags &= ~IDE_DFLAG_NO_UNLOAD; + break; + case -2: + drive->dev_flags |= IDE_DFLAG_NO_UNLOAD; + break; + } + else + rc = -EOPNOTSUPP; + } + mutex_unlock(&ide_setting_mtx); + + return rc ? rc : len; +} diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 994e41099b4..f27baa5f140 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -50,59 +50,54 @@ static void generic_id(ide_drive_t *drive) { - drive->id->cyls = drive->cyl; - drive->id->heads = drive->head; - drive->id->sectors = drive->sect; - drive->id->cur_cyls = drive->cyl; - drive->id->cur_heads = drive->head; - drive->id->cur_sectors = drive->sect; + u16 *id = drive->id; + + id[ATA_ID_CUR_CYLS] = id[ATA_ID_CYLS] = drive->cyl; + id[ATA_ID_CUR_HEADS] = id[ATA_ID_HEADS] = drive->head; + id[ATA_ID_CUR_SECTORS] = id[ATA_ID_SECTORS] = drive->sect; } static void ide_disk_init_chs(ide_drive_t *drive) { - struct hd_driveid *id = drive->id; + u16 *id = drive->id; /* Extract geometry if we did not already have one for the drive */ if (!drive->cyl || !drive->head || !drive->sect) { - drive->cyl = drive->bios_cyl = id->cyls; - drive->head = drive->bios_head = id->heads; - drive->sect = drive->bios_sect = id->sectors; + drive->cyl = drive->bios_cyl = id[ATA_ID_CYLS]; + drive->head = drive->bios_head = id[ATA_ID_HEADS]; + drive->sect = drive->bios_sect = id[ATA_ID_SECTORS]; } /* Handle logical geometry translation by the drive */ - if ((id->field_valid & 1) && id->cur_cyls && - id->cur_heads && (id->cur_heads <= 16) && id->cur_sectors) { - drive->cyl = id->cur_cyls; - drive->head = id->cur_heads; - drive->sect = id->cur_sectors; + if (ata_id_current_chs_valid(id)) { + drive->cyl = id[ATA_ID_CUR_CYLS]; + drive->head = id[ATA_ID_CUR_HEADS]; + drive->sect = id[ATA_ID_CUR_SECTORS]; } /* Use physical geometry if what we have still makes no sense */ - if (drive->head > 16 && id->heads && id->heads <= 16) { - drive->cyl = id->cyls; - drive->head = id->heads; - drive->sect = id->sectors; + if (drive->head > 16 && id[ATA_ID_HEADS] && id[ATA_ID_HEADS] <= 16) { + drive->cyl = id[ATA_ID_CYLS]; + drive->head = id[ATA_ID_HEADS]; + drive->sect = id[ATA_ID_SECTORS]; } } static void ide_disk_init_mult_count(ide_drive_t *drive) { - struct hd_driveid *id = drive->id; - - drive->mult_count = 0; - if (id->max_multsect) { -#ifdef CONFIG_IDEDISK_MULTI_MODE - id->multsect = ((id->max_multsect/2) > 1) ? id->max_multsect : 0; - id->multsect_valid = id->multsect ? 1 : 0; - drive->mult_req = id->multsect_valid ? id->max_multsect : 0; - drive->special.b.set_multmode = drive->mult_req ? 1 : 0; -#else /* original, pre IDE-NFG, per request of AC */ - drive->mult_req = 0; - if (drive->mult_req > id->max_multsect) - drive->mult_req = id->max_multsect; - if (drive->mult_req || ((id->multsect_valid & 1) && id->multsect)) + u16 *id = drive->id; + u8 max_multsect = id[ATA_ID_MAX_MULTSECT] & 0xff; + + if (max_multsect) { + if ((max_multsect / 2) > 1) + id[ATA_ID_MULTSECT] = max_multsect | 0x100; + else + id[ATA_ID_MULTSECT] &= ~0x1ff; + + drive->mult_req = id[ATA_ID_MULTSECT] & 0xff; + + if (drive->mult_req) drive->special.b.set_multmode = 1; -#endif } } @@ -119,14 +114,15 @@ static void ide_disk_init_mult_count(ide_drive_t *drive) static inline void do_identify (ide_drive_t *drive, u8 cmd) { ide_hwif_t *hwif = HWIF(drive); - int bswap = 1; - struct hd_driveid *id; + u16 *id = drive->id; + char *m = (char *)&id[ATA_ID_PROD]; + int bswap = 1, is_cfa; - id = drive->id; /* read 512 bytes of id info */ hwif->tp_ops->input_data(drive, NULL, id, SECTOR_SIZE); - drive->id_read = 1; + drive->dev_flags |= IDE_DFLAG_ID_READ; + local_irq_enable(); #ifdef DEBUG printk(KERN_INFO "%s: dumping identify data\n", drive->name); @@ -135,59 +131,59 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd) ide_fix_driveid(id); /* - * WIN_IDENTIFY returns little-endian info, - * WIN_PIDENTIFY *usually* returns little-endian info. + * ATA_CMD_ID_ATA returns little-endian info, + * ATA_CMD_ID_ATAPI *usually* returns little-endian info. */ - if (cmd == WIN_PIDENTIFY) { - if ((id->model[0] == 'N' && id->model[1] == 'E') /* NEC */ - || (id->model[0] == 'F' && id->model[1] == 'X') /* Mitsumi */ - || (id->model[0] == 'P' && id->model[1] == 'i'))/* Pioneer */ + if (cmd == ATA_CMD_ID_ATAPI) { + if ((m[0] == 'N' && m[1] == 'E') || /* NEC */ + (m[0] == 'F' && m[1] == 'X') || /* Mitsumi */ + (m[0] == 'P' && m[1] == 'i')) /* Pioneer */ /* Vertos drives may still be weird */ - bswap ^= 1; + bswap ^= 1; } - ide_fixstring(id->model, sizeof(id->model), bswap); - ide_fixstring(id->fw_rev, sizeof(id->fw_rev), bswap); - ide_fixstring(id->serial_no, sizeof(id->serial_no), bswap); + + ide_fixstring(m, ATA_ID_PROD_LEN, bswap); + ide_fixstring((char *)&id[ATA_ID_FW_REV], ATA_ID_FW_REV_LEN, bswap); + ide_fixstring((char *)&id[ATA_ID_SERNO], ATA_ID_SERNO_LEN, bswap); /* we depend on this a lot! */ - id->model[sizeof(id->model)-1] = '\0'; + m[ATA_ID_PROD_LEN - 1] = '\0'; - if (strstr(id->model, "E X A B Y T E N E S T")) + if (strstr(m, "E X A B Y T E N E S T")) goto err_misc; - printk(KERN_INFO "%s: %s, ", drive->name, id->model); + printk(KERN_INFO "%s: %s, ", drive->name, m); - drive->present = 1; - drive->dead = 0; + drive->dev_flags |= IDE_DFLAG_PRESENT; + drive->dev_flags &= ~IDE_DFLAG_DEAD; /* * Check for an ATAPI device */ - if (cmd == WIN_PIDENTIFY) { - u8 type = (id->config >> 8) & 0x1f; + if (cmd == ATA_CMD_ID_ATAPI) { + u8 type = (id[ATA_ID_CONFIG] >> 8) & 0x1f; printk(KERN_CONT "ATAPI "); switch (type) { case ide_floppy: - if (!strstr(id->model, "CD-ROM")) { - if (!strstr(id->model, "oppy") && - !strstr(id->model, "poyp") && - !strstr(id->model, "ZIP")) + if (!strstr(m, "CD-ROM")) { + if (!strstr(m, "oppy") && + !strstr(m, "poyp") && + !strstr(m, "ZIP")) printk(KERN_CONT "cdrom or floppy?, assuming "); if (drive->media != ide_cdrom) { printk(KERN_CONT "FLOPPY"); - drive->removable = 1; + drive->dev_flags |= IDE_DFLAG_REMOVABLE; break; } } /* Early cdrom models used zero */ type = ide_cdrom; case ide_cdrom: - drive->removable = 1; + drive->dev_flags |= IDE_DFLAG_REMOVABLE; #ifdef CONFIG_PPC /* kludge for Apple PowerBook internal zip */ - if (!strstr(id->model, "CD-ROM") && - strstr(id->model, "ZIP")) { + if (!strstr(m, "CD-ROM") && strstr(m, "ZIP")) { printk(KERN_CONT "FLOPPY"); type = ide_floppy; break; @@ -200,7 +196,7 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd) break; case ide_optical: printk(KERN_CONT "OPTICAL"); - drive->removable = 1; + drive->dev_flags |= IDE_DFLAG_REMOVABLE; break; default: printk(KERN_CONT "UNKNOWN (type %d)", type); @@ -210,6 +206,10 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd) drive->media = type; /* an ATAPI device ignores DRDY */ drive->ready_stat = 0; + if (ata_id_cdb_intr(id)) + drive->atapi_flags |= IDE_AFLAG_DRQ_INTERRUPT; + /* we don't do head unloading on ATAPI devices */ + drive->dev_flags |= IDE_DFLAG_NO_UNLOAD; return; } @@ -217,24 +217,24 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd) * Not an ATAPI device: looks like a "regular" hard disk */ - /* - * 0x848a = CompactFlash device - * These are *not* removable in Linux definition of the term - */ + is_cfa = ata_id_is_cfa(id); - if ((id->config != 0x848a) && (id->config & (1<<7))) - drive->removable = 1; + /* CF devices are *not* removable in Linux definition of the term */ + if (is_cfa == 0 && (id[ATA_ID_CONFIG] & (1 << 7))) + drive->dev_flags |= IDE_DFLAG_REMOVABLE; drive->media = ide_disk; - printk(KERN_CONT "%s DISK drive\n", - (id->config == 0x848a) ? "CFA" : "ATA"); + if (!ata_id_has_unload(drive->id)) + drive->dev_flags |= IDE_DFLAG_NO_UNLOAD; + + printk(KERN_CONT "%s DISK drive\n", is_cfa ? "CFA" : "ATA"); return; err_misc: kfree(id); - drive->present = 0; + drive->dev_flags &= ~IDE_DFLAG_PRESENT; return; } @@ -268,7 +268,7 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd) if (io_ports->ctl_addr) { a = tp_ops->read_altstatus(hwif); s = tp_ops->read_status(hwif); - if ((a ^ s) & ~INDEX_STAT) + if ((a ^ s) & ~ATA_IDX) /* ancient Seagate drives, broken interfaces */ printk(KERN_INFO "%s: probing with STATUS(0x%02x) " "instead of ALTSTATUS(0x%02x)\n", @@ -281,7 +281,7 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd) /* set features register for atapi * identify command to be sure of reply */ - if (cmd == WIN_PIDENTIFY) { + if (cmd == ATA_CMD_ID_ATAPI) { ide_task_t task; memset(&task, 0, sizeof(task)); @@ -294,24 +294,16 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd) /* ask drive for ID */ tp_ops->exec_command(hwif, cmd); - timeout = ((cmd == WIN_IDENTIFY) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2; - timeout += jiffies; - do { - if (time_after(jiffies, timeout)) { - /* drive timed-out */ - return 1; - } - /* give drive a breather */ - msleep(50); - s = use_altstatus ? tp_ops->read_altstatus(hwif) - : tp_ops->read_status(hwif); - } while (s & BUSY_STAT); + timeout = ((cmd == ATA_CMD_ID_ATA) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2; - /* wait for IRQ and DRQ_STAT */ + if (ide_busy_sleep(hwif, timeout, use_altstatus)) + return 1; + + /* wait for IRQ and ATA_DRQ */ msleep(50); s = tp_ops->read_status(hwif); - if (OK_STAT(s, DRQ_STAT, BAD_R_STAT)) { + if (OK_STAT(s, ATA_DRQ, BAD_R_STAT)) { unsigned long flags; /* local CPU only; some systems need this */ @@ -387,19 +379,21 @@ static int try_to_identify (ide_drive_t *drive, u8 cmd) return retval; } -static int ide_busy_sleep(ide_hwif_t *hwif) +int ide_busy_sleep(ide_hwif_t *hwif, unsigned long timeout, int altstatus) { - unsigned long timeout = jiffies + WAIT_WORSTCASE; u8 stat; + timeout += jiffies; + do { - msleep(50); - stat = hwif->tp_ops->read_status(hwif); - if ((stat & BUSY_STAT) == 0) + msleep(50); /* give drive a breather */ + stat = altstatus ? hwif->tp_ops->read_altstatus(hwif) + : hwif->tp_ops->read_status(hwif); + if ((stat & ATA_BUSY) == 0) return 0; } while (time_before(jiffies, timeout)); - return 1; + return 1; /* drive timed-out */ } static u8 ide_read_device(ide_drive_t *drive) @@ -440,17 +434,16 @@ static int do_probe (ide_drive_t *drive, u8 cmd) ide_hwif_t *hwif = HWIF(drive); const struct ide_tp_ops *tp_ops = hwif->tp_ops; int rc; - u8 stat; + u8 present = !!(drive->dev_flags & IDE_DFLAG_PRESENT), stat; + + /* avoid waiting for inappropriate probes */ + if (present && drive->media != ide_disk && cmd == ATA_CMD_ID_ATA) + return 4; - if (drive->present) { - /* avoid waiting for inappropriate probes */ - if ((drive->media != ide_disk) && (cmd == WIN_IDENTIFY)) - return 4; - } #ifdef DEBUG printk(KERN_INFO "probing for %s: present=%d, media=%d, probetype=%s\n", - drive->name, drive->present, drive->media, - (cmd == WIN_IDENTIFY) ? "ATA" : "ATAPI"); + drive->name, present, drive->media, + (cmd == ATA_CMD_ID_ATA) ? "ATA" : "ATAPI"); #endif /* needed for some systems @@ -460,11 +453,11 @@ static int do_probe (ide_drive_t *drive, u8 cmd) SELECT_DRIVE(drive); msleep(50); - if (ide_read_device(drive) != drive->select.all && !drive->present) { - if (drive->select.b.unit != 0) { + if (ide_read_device(drive) != drive->select && present == 0) { + if (drive->dn & 1) { /* exit with drive0 selected */ SELECT_DRIVE(&hwif->drives[0]); - /* allow BUSY_STAT to assert & clear */ + /* allow ATA_BUSY to assert & clear */ msleep(50); } /* no i/f present: mmm.. this should be a 4 -ml */ @@ -473,8 +466,8 @@ static int do_probe (ide_drive_t *drive, u8 cmd) stat = tp_ops->read_status(hwif); - if (OK_STAT(stat, READY_STAT, BUSY_STAT) || - drive->present || cmd == WIN_PIDENTIFY) { + if (OK_STAT(stat, ATA_DRDY, ATA_BUSY) || + present || cmd == ATA_CMD_ID_ATAPI) { /* send cmd and wait */ if ((rc = try_to_identify(drive, cmd))) { /* failed: try again */ @@ -483,17 +476,17 @@ static int do_probe (ide_drive_t *drive, u8 cmd) stat = tp_ops->read_status(hwif); - if (stat == (BUSY_STAT | READY_STAT)) + if (stat == (ATA_BUSY | ATA_DRDY)) return 4; - if (rc == 1 && cmd == WIN_PIDENTIFY) { + if (rc == 1 && cmd == ATA_CMD_ID_ATAPI) { printk(KERN_ERR "%s: no response (status = 0x%02x), " "resetting drive\n", drive->name, stat); msleep(50); SELECT_DRIVE(drive); msleep(50); - tp_ops->exec_command(hwif, WIN_SRST); - (void)ide_busy_sleep(hwif); + tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET); + (void)ide_busy_sleep(hwif, WAIT_WORSTCASE, 0); rc = try_to_identify(drive, cmd); } @@ -507,7 +500,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd) /* not present or maybe ATAPI */ rc = 3; } - if (drive->select.b.unit != 0) { + if (drive->dn & 1) { /* exit with drive0 selected */ SELECT_DRIVE(&hwif->drives[0]); msleep(50); @@ -526,13 +519,14 @@ static void enable_nest (ide_drive_t *drive) const struct ide_tp_ops *tp_ops = hwif->tp_ops; u8 stat; - printk(KERN_INFO "%s: enabling %s -- ", hwif->name, drive->id->model); + printk(KERN_INFO "%s: enabling %s -- ", + hwif->name, (char *)&drive->id[ATA_ID_PROD]); SELECT_DRIVE(drive); msleep(50); - tp_ops->exec_command(hwif, EXABYTE_ENABLE_NEST); + tp_ops->exec_command(hwif, ATA_EXABYTE_ENABLE_NEST); - if (ide_busy_sleep(hwif)) { + if (ide_busy_sleep(hwif, WAIT_WORSTCASE, 0)) { printk(KERN_CONT "failed (timeout)\n"); return; } @@ -545,12 +539,6 @@ static void enable_nest (ide_drive_t *drive) printk(KERN_CONT "failed (status = 0x%02x)\n", stat); else printk(KERN_CONT "success\n"); - - /* if !(success||timed-out) */ - if (do_probe(drive, WIN_IDENTIFY) >= 2) { - /* look for ATAPI device */ - (void) do_probe(drive, WIN_PIDENTIFY); - } } /** @@ -561,12 +549,14 @@ static void enable_nest (ide_drive_t *drive) * and presents things to the user as needed. * * Returns: 0 no device was found - * 1 device was found (note: drive->present might - * still be 0) + * 1 device was found + * (note: IDE_DFLAG_PRESENT might still be not set) */ static inline u8 probe_for_drive (ide_drive_t *drive) { + char *m; + /* * In order to keep things simple we have an id * block for all drives at all times. If the device @@ -576,31 +566,36 @@ static inline u8 probe_for_drive (ide_drive_t *drive) * Also note that 0 everywhere means "can't do X" */ - drive->id = kzalloc(SECTOR_WORDS *4, GFP_KERNEL); - drive->id_read = 0; - if(drive->id == NULL) - { + drive->dev_flags &= ~IDE_DFLAG_ID_READ; + + drive->id = kzalloc(SECTOR_SIZE, GFP_KERNEL); + if (drive->id == NULL) { printk(KERN_ERR "ide: out of memory for id data.\n"); return 0; } - strcpy(drive->id->model, "UNKNOWN"); - + + m = (char *)&drive->id[ATA_ID_PROD]; + strcpy(m, "UNKNOWN"); + /* skip probing? */ - if (!drive->noprobe) - { + if ((drive->dev_flags & IDE_DFLAG_NOPROBE) == 0) { +retry: /* if !(success||timed-out) */ - if (do_probe(drive, WIN_IDENTIFY) >= 2) { + if (do_probe(drive, ATA_CMD_ID_ATA) >= 2) /* look for ATAPI device */ - (void) do_probe(drive, WIN_PIDENTIFY); - } - if (!drive->present) + (void)do_probe(drive, ATA_CMD_ID_ATAPI); + + if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) /* drive not found */ return 0; - if (strstr(drive->id->model, "E X A B Y T E N E S T")) + + if (strstr(m, "E X A B Y T E N E S T")) { enable_nest(drive); - + goto retry; + } + /* identification failed? */ - if (!drive->id_read) { + if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) { if (drive->media == ide_disk) { printk(KERN_INFO "%s: non-IDE drive, CHS=%d/%d/%d\n", drive->name, drive->cyl, @@ -610,15 +605,17 @@ static inline u8 probe_for_drive (ide_drive_t *drive) } else { /* nuke it */ printk(KERN_WARNING "%s: Unknown device on bus refused identification. Ignoring.\n", drive->name); - drive->present = 0; + drive->dev_flags &= ~IDE_DFLAG_PRESENT; } } /* drive was found */ } - if(!drive->present) + + if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) return 0; + /* The drive wasn't being helpful. Add generic info only */ - if (drive->id_read == 0) { + if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) { generic_id(drive); return 1; } @@ -628,7 +625,7 @@ static inline u8 probe_for_drive (ide_drive_t *drive) ide_disk_init_mult_count(drive); } - return drive->present; + return !!(drive->dev_flags & IDE_DFLAG_PRESENT); } static void hwif_release_dev(struct device *dev) @@ -719,7 +716,8 @@ static int ide_port_wait_ready(ide_hwif_t *hwif) ide_drive_t *drive = &hwif->drives[unit]; /* Ignore disks that we will not probe for later. */ - if (!drive->noprobe || drive->present) { + if ((drive->dev_flags & IDE_DFLAG_NOPROBE) == 0 || + (drive->dev_flags & IDE_DFLAG_PRESENT)) { SELECT_DRIVE(drive); hwif->tp_ops->set_irq(hwif, 1); mdelay(2); @@ -740,36 +738,38 @@ out: /** * ide_undecoded_slave - look for bad CF adapters - * @drive1: drive + * @dev1: slave device * * Analyse the drives on the interface and attempt to decide if we * have the same drive viewed twice. This occurs with crap CF adapters * and PCMCIA sometimes. */ -void ide_undecoded_slave(ide_drive_t *drive1) +void ide_undecoded_slave(ide_drive_t *dev1) { - ide_drive_t *drive0 = &drive1->hwif->drives[0]; + ide_drive_t *dev0 = &dev1->hwif->drives[0]; - if ((drive1->dn & 1) == 0 || drive0->present == 0) + if ((dev1->dn & 1) == 0 || (dev0->dev_flags & IDE_DFLAG_PRESENT) == 0) return; /* If the models don't match they are not the same product */ - if (strcmp(drive0->id->model, drive1->id->model)) + if (strcmp((char *)&dev0->id[ATA_ID_PROD], + (char *)&dev1->id[ATA_ID_PROD])) return; /* Serial numbers do not match */ - if (strncmp(drive0->id->serial_no, drive1->id->serial_no, 20)) + if (strncmp((char *)&dev0->id[ATA_ID_SERNO], + (char *)&dev1->id[ATA_ID_SERNO], ATA_ID_SERNO_LEN)) return; /* No serial number, thankfully very rare for CF */ - if (drive0->id->serial_no[0] == 0) + if (*(char *)&dev0->id[ATA_ID_SERNO] == 0) return; /* Appears to be an IDE flash adapter with decode bugs */ printk(KERN_WARNING "ide-probe: ignoring undecoded slave\n"); - drive1->present = 0; + dev1->dev_flags &= ~IDE_DFLAG_PRESENT; } EXPORT_SYMBOL_GPL(ide_undecoded_slave); @@ -782,7 +782,8 @@ static int ide_probe_port(ide_hwif_t *hwif) BUG_ON(hwif->present); - if (hwif->drives[0].noprobe && hwif->drives[1].noprobe) + if ((hwif->drives[0].dev_flags & IDE_DFLAG_NOPROBE) && + (hwif->drives[1].dev_flags & IDE_DFLAG_NOPROBE)) return -EACCES; /* @@ -804,9 +805,9 @@ static int ide_probe_port(ide_hwif_t *hwif) */ for (unit = 0; unit < MAX_DRIVES; ++unit) { ide_drive_t *drive = &hwif->drives[unit]; - drive->dn = (hwif->channel ? 2 : 0) + unit; + (void) probe_for_drive(drive); - if (drive->present) + if (drive->dev_flags & IDE_DFLAG_PRESENT) rc = 0; } @@ -830,17 +831,19 @@ static void ide_port_tune_devices(ide_hwif_t *hwif) for (unit = 0; unit < MAX_DRIVES; unit++) { ide_drive_t *drive = &hwif->drives[unit]; - if (drive->present && port_ops && port_ops->quirkproc) - port_ops->quirkproc(drive); + if (drive->dev_flags & IDE_DFLAG_PRESENT) { + if (port_ops && port_ops->quirkproc) + port_ops->quirkproc(drive); + } } for (unit = 0; unit < MAX_DRIVES; ++unit) { ide_drive_t *drive = &hwif->drives[unit]; - if (drive->present) { + if (drive->dev_flags & IDE_DFLAG_PRESENT) { ide_set_max_pio(drive); - drive->nice1 = 1; + drive->dev_flags |= IDE_DFLAG_NICE1; if (hwif->dma_ops) ide_set_dma(drive); @@ -850,14 +853,14 @@ static void ide_port_tune_devices(ide_hwif_t *hwif) for (unit = 0; unit < MAX_DRIVES; ++unit) { ide_drive_t *drive = &hwif->drives[unit]; - if (hwif->host_flags & IDE_HFLAG_NO_IO_32BIT) - drive->no_io_32bit = 1; + if ((hwif->host_flags & IDE_HFLAG_NO_IO_32BIT) || + drive->id[ATA_ID_DWORD_IO]) + drive->dev_flags |= IDE_DFLAG_NO_IO_32BIT; else - drive->no_io_32bit = drive->id->dword_io ? 1 : 0; + drive->dev_flags &= ~IDE_DFLAG_NO_IO_32BIT; } } -#if MAX_HWIFS > 1 /* * save_match() is used to simplify logic in init_irq() below. * @@ -882,7 +885,6 @@ static void save_match(ide_hwif_t *hwif, ide_hwif_t *new, ide_hwif_t **match) if (!m || m->irq != hwif->irq) /* don't undo a prior perfect match */ *match = new; } -#endif /* MAX_HWIFS > 1 */ /* * init request queue @@ -961,26 +963,33 @@ static void ide_add_drive_to_hwgroup(ide_drive_t *drive) * - allocate the block device queue * - link drive into the hwgroup */ -static void ide_port_setup_devices(ide_hwif_t *hwif) +static int ide_port_setup_devices(ide_hwif_t *hwif) { - int i; + int i, j = 0; mutex_lock(&ide_cfg_mtx); for (i = 0; i < MAX_DRIVES; i++) { ide_drive_t *drive = &hwif->drives[i]; - if (!drive->present) + if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) continue; if (ide_init_queue(drive)) { printk(KERN_ERR "ide: failed to init %s\n", drive->name); + kfree(drive->id); + drive->id = NULL; + drive->dev_flags &= ~IDE_DFLAG_PRESENT; continue; } + j++; + ide_add_drive_to_hwgroup(drive); } mutex_unlock(&ide_cfg_mtx); + + return j; } static ide_hwif_t *ide_ports[MAX_HWIFS]; @@ -1037,14 +1046,9 @@ static int init_irq (ide_hwif_t *hwif) ide_hwgroup_t *hwgroup; ide_hwif_t *match = NULL; - - BUG_ON(in_interrupt()); - BUG_ON(irqs_disabled()); - BUG_ON(hwif == NULL); - mutex_lock(&ide_cfg_mtx); hwif->hwgroup = NULL; -#if MAX_HWIFS > 1 + /* * Group up with any other hwifs that share our irq(s). */ @@ -1069,7 +1073,7 @@ static int init_irq (ide_hwif_t *hwif) } } } -#endif /* MAX_HWIFS > 1 */ + /* * If we are still without a hwgroup, then form a new one */ @@ -1116,7 +1120,8 @@ static int init_irq (ide_hwif_t *hwif) sa = IRQF_SHARED; #endif /* __mc68000__ */ - if (IDE_CHIPSET_IS_PCI(hwif->chipset)) + if (hwif->chipset == ide_pci || hwif->chipset == ide_cmd646 || + hwif->chipset == ide_ali14xx) sa = IRQF_SHARED; if (io_ports->ctl_addr) @@ -1167,12 +1172,13 @@ static struct kobject *ata_probe(dev_t dev, int *part, void *data) ide_hwif_t *hwif = data; int unit = *part >> PARTN_BITS; ide_drive_t *drive = &hwif->drives[unit]; - if (!drive->present) + + if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) return NULL; if (drive->media == ide_disk) request_module("ide-disk"); - if (drive->scsi) + if (drive->dev_flags & IDE_DFLAG_SCSI) request_module("ide-scsi"); if (drive->media == ide_cdrom || drive->media == ide_optical) request_module("ide-cd"); @@ -1188,7 +1194,7 @@ static struct kobject *exact_match(dev_t dev, int *part, void *data) { struct gendisk *p = data; *part &= (1 << PARTN_BITS) - 1; - return &p->dev.kobj; + return &disk_to_dev(p)->kobj; } static int exact_lock(dev_t dev, void *data) @@ -1219,7 +1225,7 @@ EXPORT_SYMBOL_GPL(ide_unregister_region); void ide_init_disk(struct gendisk *disk, ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - unsigned int unit = (drive->select.all >> 4) & 1; + unsigned int unit = drive->dn & 1; disk->major = hwif->major; disk->first_minor = unit << PARTN_BITS; @@ -1262,7 +1268,7 @@ static void drive_release_dev (struct device *dev) ide_remove_drive_from_hwgroup(drive); kfree(drive->id); drive->id = NULL; - drive->present = 0; + drive->dev_flags &= ~IDE_DFLAG_PRESENT; /* Messed up locking ... */ spin_unlock_irq(&ide_lock); blk_cleanup_queue(drive->queue); @@ -1341,11 +1347,9 @@ static void hwif_register_devices(ide_hwif_t *hwif) struct device *dev = &drive->gendev; int ret; - if (!drive->present) + if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) continue; - ide_add_generic_settings(drive); - snprintf(dev->bus_id, BUS_ID_SIZE, "%u.%u", hwif->index, i); dev->parent = &hwif->gendev; dev->bus = &ide_bus_type; @@ -1367,12 +1371,14 @@ static void ide_port_init_devices(ide_hwif_t *hwif) for (i = 0; i < MAX_DRIVES; i++) { ide_drive_t *drive = &hwif->drives[i]; + drive->dn = i + hwif->channel * 2; + if (hwif->host_flags & IDE_HFLAG_IO_32BIT) drive->io_32bit = 1; if (hwif->host_flags & IDE_HFLAG_UNMASK_IRQS) - drive->unmask = 1; + drive->dev_flags |= IDE_DFLAG_UNMASK; if (hwif->host_flags & IDE_HFLAG_NO_UNMASK_IRQS) - drive->no_unmask = 1; + drive->dev_flags |= IDE_DFLAG_NO_UNMASK; if (port_ops && port_ops->init_dev) port_ops->init_dev(drive); @@ -1492,7 +1498,7 @@ static struct device_attribute *ide_port_attrs[] = { static int ide_sysfs_register_port(ide_hwif_t *hwif) { - int i, rc; + int i, uninitialized_var(rc); for (i = 0; ide_port_attrs[i]; i++) { rc = device_create_file(hwif->portdev, ide_port_attrs[i]); @@ -1529,19 +1535,14 @@ static int ide_find_port_slot(const struct ide_port_info *d) * ports 0x1f0/0x170 (the ide0/ide1 defaults). */ mutex_lock(&ide_cfg_mtx); - if (MAX_HWIFS == 1) { - if (ide_indexes == 0 && i == 0) - idx = 1; + if (bootable) { + if ((ide_indexes | i) != (1 << MAX_HWIFS) - 1) + idx = ffz(ide_indexes | i); } else { - if (bootable) { - if ((ide_indexes | i) != (1 << MAX_HWIFS) - 1) - idx = ffz(ide_indexes | i); - } else { - if ((ide_indexes | 3) != (1 << MAX_HWIFS) - 1) - idx = ffz(ide_indexes | 3); - else if ((ide_indexes & 3) != 3) - idx = ffz(ide_indexes); - } + if ((ide_indexes | 3) != (1 << MAX_HWIFS) - 1) + idx = ffz(ide_indexes | 3); + else if ((ide_indexes & 3) != 3) + idx = ffz(ide_indexes); } if (idx >= 0) ide_indexes |= (1 << idx); @@ -1557,8 +1558,7 @@ static void ide_free_port_slot(int idx) mutex_unlock(&ide_cfg_mtx); } -struct ide_host *ide_host_alloc_all(const struct ide_port_info *d, - hw_regs_t **hws) +struct ide_host *ide_host_alloc(const struct ide_port_info *d, hw_regs_t **hws) { struct ide_host *host; int i; @@ -1567,7 +1567,7 @@ struct ide_host *ide_host_alloc_all(const struct ide_port_info *d, if (host == NULL) return NULL; - for (i = 0; i < MAX_HWIFS; i++) { + for (i = 0; i < MAX_HOST_PORTS; i++) { ide_hwif_t *hwif; int idx; @@ -1602,23 +1602,13 @@ struct ide_host *ide_host_alloc_all(const struct ide_port_info *d, if (hws[0]) host->dev[0] = hws[0]->dev; - if (d) + if (d) { + host->init_chipset = d->init_chipset; host->host_flags = d->host_flags; + } return host; } -EXPORT_SYMBOL_GPL(ide_host_alloc_all); - -struct ide_host *ide_host_alloc(const struct ide_port_info *d, hw_regs_t **hws) -{ - hw_regs_t *hws_all[MAX_HWIFS]; - int i; - - for (i = 0; i < MAX_HWIFS; i++) - hws_all[i] = (i < 4) ? hws[i] : NULL; - - return ide_host_alloc_all(d, hws_all); -} EXPORT_SYMBOL_GPL(ide_host_alloc); int ide_host_register(struct ide_host *host, const struct ide_port_info *d, @@ -1627,7 +1617,7 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d, ide_hwif_t *hwif, *mate = NULL; int i, j = 0; - for (i = 0; i < MAX_HWIFS; i++) { + for (i = 0; i < MAX_HOST_PORTS; i++) { hwif = host->ports[i]; if (hwif == NULL) { @@ -1640,22 +1630,22 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d, if (d == NULL) { mate = NULL; - continue; - } + } else { + if ((i & 1) && mate) { + hwif->mate = mate; + mate->mate = hwif; + } - if ((i & 1) && mate) { - hwif->mate = mate; - mate->mate = hwif; - } + mate = (i & 1) ? NULL : hwif; - mate = (i & 1) ? NULL : hwif; + ide_init_port(hwif, i & 1, d); + ide_port_cable_detect(hwif); + } - ide_init_port(hwif, i & 1, d); - ide_port_cable_detect(hwif); ide_port_init_devices(hwif); } - for (i = 0; i < MAX_HWIFS; i++) { + for (i = 0; i < MAX_HOST_PORTS; i++) { hwif = host->ports[i]; if (hwif == NULL) @@ -1672,7 +1662,7 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d, ide_port_tune_devices(hwif); } - for (i = 0; i < MAX_HWIFS; i++) { + for (i = 0; i < MAX_HOST_PORTS; i++) { hwif = host->ports[i]; if (hwif == NULL) @@ -1685,10 +1675,13 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d, continue; } - j++; - if (hwif->present) - ide_port_setup_devices(hwif); + if (ide_port_setup_devices(hwif) == 0) { + hwif->present = 0; + continue; + } + + j++; ide_acpi_init(hwif); @@ -1696,7 +1689,7 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d, ide_acpi_port_init_devices(hwif); } - for (i = 0; i < MAX_HWIFS; i++) { + for (i = 0; i < MAX_HOST_PORTS; i++) { hwif = host->ports[i]; if (hwif == NULL) @@ -1709,7 +1702,7 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d, hwif_register_devices(hwif); } - for (i = 0; i < MAX_HWIFS; i++) { + for (i = 0; i < MAX_HOST_PORTS; i++) { hwif = host->ports[i]; if (hwif == NULL) @@ -1754,7 +1747,7 @@ void ide_host_free(struct ide_host *host) ide_hwif_t *hwif; int i; - for (i = 0; i < MAX_HWIFS; i++) { + for (i = 0; i < MAX_HOST_PORTS; i++) { hwif = host->ports[i]; if (hwif == NULL) @@ -1772,7 +1765,7 @@ void ide_host_remove(struct ide_host *host) { int i; - for (i = 0; i < MAX_HWIFS; i++) { + for (i = 0; i < MAX_HOST_PORTS; i++) { if (host->ports[i]) ide_unregister(host->ports[i]); } diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index f66c9c3f6fc..b26926487cc 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -12,14 +12,6 @@ * "settings" files. e.g. "cat /proc/ide0/hda/settings" * To write a new value "val" into a specific setting "name", use: * echo "name:val" >/proc/ide/ide0/hda/settings - * - * Also useful, "cat /proc/ide0/hda/[identify, smart_values, - * smart_thresholds, capabilities]" will issue an IDENTIFY / - * PACKET_IDENTIFY / SMART_READ_VALUES / SMART_READ_THRESHOLDS / - * SENSE CAPABILITIES command to /dev/hda, and then dump out the - * returned data as 256 16-bit words. The "hdparm" utility will - * be updated someday soon to use this mechanism. - * */ #include <linux/module.h> @@ -31,7 +23,6 @@ #include <linux/mm.h> #include <linux/pci.h> #include <linux/ctype.h> -#include <linux/hdreg.h> #include <linux/ide.h> #include <linux/seq_file.h> @@ -109,13 +100,14 @@ static int proc_ide_read_identify err = taskfile_lib_get_identify(drive, page); if (!err) { - char *out = ((char *)page) + (SECTOR_WORDS * 4); + char *out = (char *)page + SECTOR_SIZE; + page = out; do { out += sprintf(out, "%04x%c", le16_to_cpup(val), (++i & 7) ? ' ' : '\n'); val += 1; - } while (i < (SECTOR_WORDS * 2)); + } while (i < SECTOR_SIZE / 2); len = out - page; } } @@ -123,140 +115,25 @@ static int proc_ide_read_identify } /** - * __ide_add_setting - add an ide setting option - * @drive: drive to use - * @name: setting name - * @rw: true if the function is read write - * @data_type: type of data - * @min: range minimum - * @max: range maximum - * @mul_factor: multiplication scale - * @div_factor: divison scale - * @data: private data field - * @set: setting - * @auto_remove: setting auto removal flag - * - * Removes the setting named from the device if it is present. - * The function takes the settings_lock to protect against - * parallel changes. This function must not be called from IRQ - * context. Returns 0 on success or -1 on failure. - * - * BUGS: This code is seriously over-engineered. There is also - * magic about how the driver specific features are setup. If - * a driver is attached we assume the driver settings are auto - * remove. - */ - -static int __ide_add_setting(ide_drive_t *drive, const char *name, int rw, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set, int auto_remove) -{ - ide_settings_t **p = (ide_settings_t **) &drive->settings, *setting = NULL; - - mutex_lock(&ide_setting_mtx); - while ((*p) && strcmp((*p)->name, name) < 0) - p = &((*p)->next); - if ((setting = kzalloc(sizeof(*setting), GFP_KERNEL)) == NULL) - goto abort; - if ((setting->name = kmalloc(strlen(name) + 1, GFP_KERNEL)) == NULL) - goto abort; - strcpy(setting->name, name); - setting->rw = rw; - setting->data_type = data_type; - setting->min = min; - setting->max = max; - setting->mul_factor = mul_factor; - setting->div_factor = div_factor; - setting->data = data; - setting->set = set; - - setting->next = *p; - if (auto_remove) - setting->auto_remove = 1; - *p = setting; - mutex_unlock(&ide_setting_mtx); - return 0; -abort: - mutex_unlock(&ide_setting_mtx); - kfree(setting); - return -1; -} - -int ide_add_setting(ide_drive_t *drive, const char *name, int rw, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set) -{ - return __ide_add_setting(drive, name, rw, data_type, min, max, mul_factor, div_factor, data, set, 1); -} - -EXPORT_SYMBOL(ide_add_setting); - -/** - * __ide_remove_setting - remove an ide setting option - * @drive: drive to use - * @name: setting name - * - * Removes the setting named from the device if it is present. - * The caller must hold the setting semaphore. - */ - -static void __ide_remove_setting(ide_drive_t *drive, char *name) -{ - ide_settings_t **p, *setting; - - p = (ide_settings_t **) &drive->settings; - - while ((*p) && strcmp((*p)->name, name)) - p = &((*p)->next); - setting = (*p); - if (setting == NULL) - return; - - (*p) = setting->next; - - kfree(setting->name); - kfree(setting); -} - -/** - * auto_remove_settings - remove driver specific settings - * @drive: drive - * - * Automatically remove all the driver specific settings for this - * drive. This function may not be called from IRQ context. The - * caller must hold ide_setting_mtx. - */ - -static void auto_remove_settings(ide_drive_t *drive) -{ - ide_settings_t *setting; -repeat: - setting = drive->settings; - while (setting) { - if (setting->auto_remove) { - __ide_remove_setting(drive, setting->name); - goto repeat; - } - setting = setting->next; - } -} - -/** - * ide_find_setting_by_name - find a drive specific setting - * @drive: drive to scan + * ide_find_setting - find a specific setting + * @st: setting table pointer * @name: setting name * - * Scan's the device setting table for a matching entry and returns + * Scan's the setting table for a matching entry and returns * this or NULL if no entry is found. The caller must hold the * setting semaphore */ -static ide_settings_t *ide_find_setting_by_name(ide_drive_t *drive, char *name) +static +const struct ide_proc_devset *ide_find_setting(const struct ide_proc_devset *st, + char *name) { - ide_settings_t *setting = drive->settings; - - while (setting) { - if (strcmp(setting->name, name) == 0) + while (st->name) { + if (strcmp(st->name, name) == 0) break; - setting = setting->next; + st++; } - return setting; + return st->name ? st : NULL; } /** @@ -272,26 +149,20 @@ static ide_settings_t *ide_find_setting_by_name(ide_drive_t *drive, char *name) * be told apart */ -static int ide_read_setting(ide_drive_t *drive, ide_settings_t *setting) +static int ide_read_setting(ide_drive_t *drive, + const struct ide_proc_devset *setting) { - int val = -EINVAL; - unsigned long flags; + const struct ide_devset *ds = setting->setting; + int val = -EINVAL; + + if (ds->get) { + unsigned long flags; - if ((setting->rw & SETTING_READ)) { spin_lock_irqsave(&ide_lock, flags); - switch (setting->data_type) { - case TYPE_BYTE: - val = *((u8 *) setting->data); - break; - case TYPE_SHORT: - val = *((u16 *) setting->data); - break; - case TYPE_INT: - val = *((u32 *) setting->data); - break; - } + val = ds->get(drive); spin_unlock_irqrestore(&ide_lock, flags); } + return val; } @@ -313,33 +184,23 @@ static int ide_read_setting(ide_drive_t *drive, ide_settings_t *setting) * The current scheme of polling is kludgy, though safe enough. */ -static int ide_write_setting(ide_drive_t *drive, ide_settings_t *setting, int val) +static int ide_write_setting(ide_drive_t *drive, + const struct ide_proc_devset *setting, int val) { + const struct ide_devset *ds = setting->setting; + if (!capable(CAP_SYS_ADMIN)) return -EACCES; - if (setting->set) - return setting->set(drive, val); - if (!(setting->rw & SETTING_WRITE)) + if (!ds->set) return -EPERM; - if (val < setting->min || val > setting->max) + if ((ds->flags & DS_SYNC) + && (val < setting->min || val > setting->max)) return -EINVAL; - if (ide_spin_wait_hwgroup(drive)) - return -EBUSY; - switch (setting->data_type) { - case TYPE_BYTE: - *((u8 *) setting->data) = val; - break; - case TYPE_SHORT: - *((u16 *) setting->data) = val; - break; - case TYPE_INT: - *((u32 *) setting->data) = val; - break; - } - spin_unlock_irq(&ide_lock); - return 0; + return ide_devset_execute(drive, ds, val); } +ide_devset_get(xfer_rate, current_speed); + static int set_xfer_rate (ide_drive_t *drive, int arg) { ide_task_t task; @@ -349,7 +210,7 @@ static int set_xfer_rate (ide_drive_t *drive, int arg) return -EINVAL; memset(&task, 0, sizeof(task)); - task.tf.command = WIN_SETFEATURES; + task.tf.command = ATA_CMD_SET_FEATURES; task.tf.feature = SETFEATURES_XFER; task.tf.nsect = (u8)arg; task.tf_flags = IDE_TFLAG_OUT_FEATURE | IDE_TFLAG_OUT_NSECT | @@ -364,29 +225,23 @@ static int set_xfer_rate (ide_drive_t *drive, int arg) return err; } -/** - * ide_add_generic_settings - generic ide settings - * @drive: drive being configured - * - * Add the generic parts of the system settings to the /proc files. - * The caller must not be holding the ide_setting_mtx. - */ - -void ide_add_generic_settings (ide_drive_t *drive) -{ -/* - * drive setting name read/write access data type min max mul_factor div_factor data pointer set function - */ - __ide_add_setting(drive, "io_32bit", drive->no_io_32bit ? SETTING_READ : SETTING_RW, TYPE_BYTE, 0, 1 + (SUPPORT_VLB_SYNC << 1), 1, 1, &drive->io_32bit, set_io_32bit, 0); - __ide_add_setting(drive, "keepsettings", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->keep_settings, NULL, 0); - __ide_add_setting(drive, "nice1", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->nice1, NULL, 0); - __ide_add_setting(drive, "pio_mode", SETTING_WRITE, TYPE_BYTE, 0, 255, 1, 1, NULL, set_pio_mode, 0); - __ide_add_setting(drive, "unmaskirq", drive->no_unmask ? SETTING_READ : SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->unmask, NULL, 0); - __ide_add_setting(drive, "using_dma", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->using_dma, set_using_dma, 0); - __ide_add_setting(drive, "init_speed", SETTING_RW, TYPE_BYTE, 0, 70, 1, 1, &drive->init_speed, NULL, 0); - __ide_add_setting(drive, "current_speed", SETTING_RW, TYPE_BYTE, 0, 70, 1, 1, &drive->current_speed, set_xfer_rate, 0); - __ide_add_setting(drive, "number", SETTING_RW, TYPE_BYTE, 0, 3, 1, 1, &drive->dn, NULL, 0); -} +ide_devset_rw(current_speed, xfer_rate); +ide_devset_rw_field(init_speed, init_speed); +ide_devset_rw_flag(nice1, IDE_DFLAG_NICE1); +ide_devset_rw_field(number, dn); + +static const struct ide_proc_devset ide_generic_settings[] = { + IDE_PROC_DEVSET(current_speed, 0, 70), + IDE_PROC_DEVSET(init_speed, 0, 70), + IDE_PROC_DEVSET(io_32bit, 0, 1 + (SUPPORT_VLB_SYNC << 1)), + IDE_PROC_DEVSET(keepsettings, 0, 1), + IDE_PROC_DEVSET(nice1, 0, 1), + IDE_PROC_DEVSET(number, 0, 3), + IDE_PROC_DEVSET(pio_mode, 0, 255), + IDE_PROC_DEVSET(unmaskirq, 0, 1), + IDE_PROC_DEVSET(using_dma, 0, 1), + { 0 }, +}; static void proc_ide_settings_warn(void) { @@ -403,19 +258,32 @@ static void proc_ide_settings_warn(void) static int proc_ide_read_settings (char *page, char **start, off_t off, int count, int *eof, void *data) { + const struct ide_proc_devset *setting, *g, *d; + const struct ide_devset *ds; ide_drive_t *drive = (ide_drive_t *) data; - ide_settings_t *setting = (ide_settings_t *) drive->settings; char *out = page; int len, rc, mul_factor, div_factor; proc_ide_settings_warn(); mutex_lock(&ide_setting_mtx); + g = ide_generic_settings; + d = drive->settings; out += sprintf(out, "name\t\t\tvalue\t\tmin\t\tmax\t\tmode\n"); out += sprintf(out, "----\t\t\t-----\t\t---\t\t---\t\t----\n"); - while (setting) { - mul_factor = setting->mul_factor; - div_factor = setting->div_factor; + while (g->name || (d && d->name)) { + /* read settings in the alphabetical order */ + if (g->name && d && d->name) { + if (strcmp(d->name, g->name) < 0) + setting = d++; + else + setting = g++; + } else if (d && d->name) { + setting = d++; + } else + setting = g++; + mul_factor = setting->mulf ? setting->mulf(drive) : 1; + div_factor = setting->divf ? setting->divf(drive) : 1; out += sprintf(out, "%-24s", setting->name); rc = ide_read_setting(drive, setting); if (rc >= 0) @@ -423,12 +291,12 @@ static int proc_ide_read_settings else out += sprintf(out, "%-16s", "write-only"); out += sprintf(out, "%-16d%-16d", (setting->min * mul_factor + div_factor - 1) / div_factor, setting->max * mul_factor / div_factor); - if (setting->rw & SETTING_READ) + ds = setting->setting; + if (ds->get) out += sprintf(out, "r"); - if (setting->rw & SETTING_WRITE) + if (ds->set) out += sprintf(out, "w"); out += sprintf(out, "\n"); - setting = setting->next; } len = out - page; mutex_unlock(&ide_setting_mtx); @@ -442,9 +310,10 @@ static int proc_ide_write_settings(struct file *file, const char __user *buffer, { ide_drive_t *drive = (ide_drive_t *) data; char name[MAX_LEN + 1]; - int for_real = 0; + int for_real = 0, mul_factor, div_factor; unsigned long n; - ide_settings_t *setting; + + const struct ide_proc_devset *setting; char *buf, *s; if (!capable(CAP_SYS_ADMIN)) @@ -512,13 +381,21 @@ static int proc_ide_write_settings(struct file *file, const char __user *buffer, } mutex_lock(&ide_setting_mtx); - setting = ide_find_setting_by_name(drive, name); + /* generic settings first, then driver specific ones */ + setting = ide_find_setting(ide_generic_settings, name); if (!setting) { - mutex_unlock(&ide_setting_mtx); - goto parse_error; + if (drive->settings) + setting = ide_find_setting(drive->settings, name); + if (!setting) { + mutex_unlock(&ide_setting_mtx); + goto parse_error; + } + } + if (for_real) { + mul_factor = setting->mulf ? setting->mulf(drive) : 1; + div_factor = setting->divf ? setting->divf(drive) : 1; + ide_write_setting(drive, setting, val * div_factor / mul_factor); } - if (for_real) - ide_write_setting(drive, setting, val * setting->div_factor / setting->mul_factor); mutex_unlock(&ide_setting_mtx); } } while (!for_real++); @@ -561,11 +438,10 @@ static int proc_ide_read_dmodel (char *page, char **start, off_t off, int count, int *eof, void *data) { ide_drive_t *drive = (ide_drive_t *) data; - struct hd_driveid *id = drive->id; + char *m = (char *)&drive->id[ATA_ID_PROD]; int len; - len = sprintf(page, "%.40s\n", - (id && id->model[0]) ? (char *)id->model : "(none)"); + len = sprintf(page, "%.40s\n", m[0] ? m : "(none)"); PROC_IDE_READ_RETURN(page, start, off, count, eof, len); } @@ -690,6 +566,10 @@ static void ide_remove_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t void ide_proc_register_driver(ide_drive_t *drive, ide_driver_t *driver) { + mutex_lock(&ide_setting_mtx); + drive->settings = driver->settings; + mutex_unlock(&ide_setting_mtx); + ide_add_proc_entries(drive->proc, driver->proc, drive); } @@ -726,7 +606,7 @@ void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver) * OTOH both ide_{read,write}_setting are only ever used under * ide_setting_mtx. */ - auto_remove_settings(drive); + drive->settings = NULL; spin_unlock_irqrestore(&ide_lock, flags); mutex_unlock(&ide_setting_mtx); } @@ -742,9 +622,7 @@ void ide_proc_port_register_devices(ide_hwif_t *hwif) for (d = 0; d < MAX_DRIVES; d++) { ide_drive_t *drive = &hwif->drives[d]; - if (!drive->present) - continue; - if (drive->proc) + if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0 || drive->proc) continue; drive->proc = proc_mkdir(drive->name, parent); diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 1bce84b5663..25ac60f5327 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -15,6 +15,8 @@ * Documentation/ide/ChangeLog.ide-tape.1995-2002 */ +#define DRV_NAME "ide-tape" + #define IDETAPE_VERSION "1.20" #include <linux/module.h> @@ -54,8 +56,6 @@ enum { DBG_CHRDEV = (1 << 2), /* all remaining procedures */ DBG_PROCS = (1 << 3), - /* buffer alloc info (pc_stack & rq_stack) */ - DBG_PCRQ_STACK = (1 << 4), }; /* define to see debug info */ @@ -81,26 +81,6 @@ enum { #define IDETAPE_MAX_PC_RETRIES 3 /* - * With each packet command, we allocate a buffer of IDETAPE_PC_BUFFER_SIZE - * bytes. This is used for several packet commands (Not for READ/WRITE commands) - */ -#define IDETAPE_PC_BUFFER_SIZE 256 - -/* - * In various places in the driver, we need to allocate storage - * for packet commands and requests, which will remain valid while - * we leave the driver to wait for an interrupt or a timeout event. - */ -#define IDETAPE_PC_STACK (10 + IDETAPE_MAX_PC_RETRIES) - -/* - * Some drives (for example, Seagate STT3401A Travan) require a very long - * timeout, because they don't return an interrupt or clear their busy bit - * until after the command completes (even retension commands). - */ -#define IDETAPE_WAIT_CMD (900*HZ) - -/* * The following parameter is used to select the point in the internal tape fifo * in which we will start to refill the buffer. Decreasing the following * parameter will improve the system's latency and interactive response, while @@ -172,20 +152,6 @@ struct idetape_bh { #define IDETAPE_LU_RETENSION_MASK 2 #define IDETAPE_LU_EOT_MASK 4 -/* - * Special requests for our block device strategy routine. - * - * In order to service a character device command, we add special requests to - * the tail of our block device request queue and wait for their completion. - */ - -enum { - REQ_IDETAPE_PC1 = (1 << 0), /* packet command (first stage) */ - REQ_IDETAPE_PC2 = (1 << 1), /* packet command (second stage) */ - REQ_IDETAPE_READ = (1 << 2), - REQ_IDETAPE_WRITE = (1 << 3), -}; - /* Error codes returned in rq->errors to the higher part of the driver. */ #define IDETAPE_ERROR_GENERAL 101 #define IDETAPE_ERROR_FILEMARK 102 @@ -206,31 +172,15 @@ typedef struct ide_tape_obj { struct kref kref; /* - * Since a typical character device operation requires more - * than one packet command, we provide here enough memory - * for the maximum of interconnected packet commands. - * The packet commands are stored in the circular array pc_stack. - * pc_stack_index points to the last used entry, and warps around - * to the start when we get to the last array entry. - * - * pc points to the current processed packet command. - * * failed_pc points to the last failed packet command, or contains * NULL if we do not need to retry any packet command. This is * required since an additional packet command is needed before the * retry, to get detailed information on what went wrong. */ - /* Current packet command */ - struct ide_atapi_pc *pc; /* Last failed packet command */ struct ide_atapi_pc *failed_pc; - /* Packet command stack */ - struct ide_atapi_pc pc_stack[IDETAPE_PC_STACK]; - /* Next free packet command storage space */ - int pc_stack_index; - struct request rq_stack[IDETAPE_PC_STACK]; - /* We implement a circular array */ - int rq_stack_index; + /* used by REQ_IDETAPE_{READ,WRITE} requests */ + struct ide_atapi_pc queued_pc; /* * DSC polling variables. @@ -317,11 +267,6 @@ static DEFINE_MUTEX(idetape_ref_mutex); static struct class *idetape_sysfs_class; -#define to_ide_tape(obj) container_of(obj, struct ide_tape_obj, kref) - -#define ide_tape_g(disk) \ - container_of((disk)->private_data, struct ide_tape_obj, driver) - static void ide_tape_release(struct kref *); static struct ide_tape_obj *ide_tape_get(struct gendisk *disk) @@ -329,7 +274,7 @@ static struct ide_tape_obj *ide_tape_get(struct gendisk *disk) struct ide_tape_obj *tape = NULL; mutex_lock(&idetape_ref_mutex); - tape = ide_tape_g(disk); + tape = ide_drv_g(disk, ide_tape_obj); if (tape) { if (ide_device_get(tape->drive)) tape = NULL; @@ -356,8 +301,6 @@ static void ide_tape_put(struct ide_tape_obj *tape) */ static struct ide_tape_obj *idetape_devs[MAX_HWIFS * MAX_DRIVES]; -#define ide_tape_f(file) ((file)->private_data) - static struct ide_tape_obj *ide_tape_chrdev_get(unsigned int i) { struct ide_tape_obj *tape = NULL; @@ -451,47 +394,6 @@ static void idetape_update_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc) } /* - * idetape_next_pc_storage returns a pointer to a place in which we can - * safely store a packet command, even though we intend to leave the - * driver. A storage space for a maximum of IDETAPE_PC_STACK packet - * commands is allocated at initialization time. - */ -static struct ide_atapi_pc *idetape_next_pc_storage(ide_drive_t *drive) -{ - idetape_tape_t *tape = drive->driver_data; - - debug_log(DBG_PCRQ_STACK, "pc_stack_index=%d\n", tape->pc_stack_index); - - if (tape->pc_stack_index == IDETAPE_PC_STACK) - tape->pc_stack_index = 0; - return (&tape->pc_stack[tape->pc_stack_index++]); -} - -/* - * idetape_next_rq_storage is used along with idetape_next_pc_storage. - * Since we queue packet commands in the request queue, we need to - * allocate a request, along with the allocation of a packet command. - */ - -/************************************************************** - * * - * This should get fixed to use kmalloc(.., GFP_ATOMIC) * - * followed later on by kfree(). -ml * - * * - **************************************************************/ - -static struct request *idetape_next_rq_storage(ide_drive_t *drive) -{ - idetape_tape_t *tape = drive->driver_data; - - debug_log(DBG_PCRQ_STACK, "rq_stack_index=%d\n", tape->rq_stack_index); - - if (tape->rq_stack_index == IDETAPE_PC_STACK) - tape->rq_stack_index = 0; - return (&tape->rq_stack[tape->rq_stack_index++]); -} - -/* * called on each failed packet command retry to analyze the request sense. We * currently do not utilize this information. */ @@ -606,14 +508,19 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects) return 0; } -static void ide_tape_callback(ide_drive_t *drive) +static void ide_tape_handle_dsc(ide_drive_t *); + +static void ide_tape_callback(ide_drive_t *drive, int dsc) { idetape_tape_t *tape = drive->driver_data; - struct ide_atapi_pc *pc = tape->pc; + struct ide_atapi_pc *pc = drive->pc; int uptodate = pc->error ? 0 : 1; debug_log(DBG_PROCS, "Enter %s\n", __func__); + if (dsc) + ide_tape_handle_dsc(drive); + if (tape->failed_pc == pc) tape->failed_pc = NULL; @@ -642,7 +549,7 @@ static void ide_tape_callback(ide_drive_t *drive) if (pc->error) uptodate = pc->error; } else if (pc->c[0] == READ_POSITION && uptodate) { - u8 *readpos = tape->pc->buf; + u8 *readpos = pc->buf; debug_log(DBG_SENSE, "BOP - %s\n", (readpos[0] & 0x80) ? "Yes" : "No"); @@ -667,79 +574,6 @@ static void ide_tape_callback(ide_drive_t *drive) idetape_end_request(drive, uptodate, 0); } -static void idetape_init_pc(struct ide_atapi_pc *pc) -{ - memset(pc->c, 0, 12); - pc->retries = 0; - pc->flags = 0; - pc->req_xfer = 0; - pc->buf = pc->pc_buf; - pc->buf_size = IDETAPE_PC_BUFFER_SIZE; - pc->bh = NULL; - pc->b_data = NULL; -} - -static void idetape_create_request_sense_cmd(struct ide_atapi_pc *pc) -{ - idetape_init_pc(pc); - pc->c[0] = REQUEST_SENSE; - pc->c[4] = 20; - pc->req_xfer = 20; -} - -static void idetape_init_rq(struct request *rq, u8 cmd) -{ - blk_rq_init(NULL, rq); - rq->cmd_type = REQ_TYPE_SPECIAL; - rq->cmd[13] = cmd; -} - -/* - * Generate a new packet command request in front of the request queue, before - * the current request, so that it will be processed immediately, on the next - * pass through the driver. The function below is called from the request - * handling part of the driver (the "bottom" part). Safe storage for the request - * should be allocated with ide_tape_next_{pc,rq}_storage() prior to that. - * - * Memory for those requests is pre-allocated at initialization time, and is - * limited to IDETAPE_PC_STACK requests. We assume that we have enough space for - * the maximum possible number of inter-dependent packet commands. - * - * The higher level of the driver - The ioctl handler and the character device - * handling functions should queue request to the lower level part and wait for - * their completion using idetape_queue_pc_tail or idetape_queue_rw_tail. - */ -static void idetape_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc, - struct request *rq) -{ - struct ide_tape_obj *tape = drive->driver_data; - - idetape_init_rq(rq, REQ_IDETAPE_PC1); - rq->cmd_flags |= REQ_PREEMPT; - rq->buffer = (char *) pc; - rq->rq_disk = tape->disk; - memcpy(rq->cmd, pc->c, 12); - ide_do_drive_cmd(drive, rq); -} - -/* - * idetape_retry_pc is called when an error was detected during the - * last packet command. We queue a request sense packet command in - * the head of the request list. - */ -static void idetape_retry_pc(ide_drive_t *drive) -{ - struct ide_atapi_pc *pc; - struct request *rq; - - (void)ide_read_error(drive); - pc = idetape_next_pc_storage(drive); - rq = idetape_next_rq_storage(drive); - idetape_create_request_sense_cmd(pc); - set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags); - idetape_queue_pc_head(drive, pc, rq); -} - /* * Postpone the current request so that ide.c will be able to service requests * from another device on the same hwgroup while we are polling for DSC. @@ -766,44 +600,30 @@ static void ide_tape_handle_dsc(ide_drive_t *drive) idetape_postpone_request(drive); } -static void ide_tape_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, +static int ide_tape_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, unsigned int bcount, int write) { if (write) idetape_output_buffers(drive, pc, bcount); else idetape_input_buffers(drive, pc, bcount); -} - -/* - * This is the usual interrupt handler which will be called during a packet - * command. We will transfer some of the data (as requested by the drive) and - * will re-point interrupt handler to us. When data transfer is finished, we - * will act according to the algorithm described before - * idetape_issue_pc. - */ -static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) -{ - idetape_tape_t *tape = drive->driver_data; - return ide_pc_intr(drive, tape->pc, idetape_pc_intr, IDETAPE_WAIT_CMD, - NULL, idetape_update_buffers, idetape_retry_pc, - ide_tape_handle_dsc, ide_tape_io_buffers); + return bcount; } /* * Packet Command Interface * - * The current Packet Command is available in tape->pc, and will not change + * The current Packet Command is available in drive->pc, and will not change * until we finish handling it. Each packet command is associated with a * callback function that will be called when the command is finished. * * The handling will be done in three stages: * * 1. idetape_issue_pc will send the packet command to the drive, and will set - * the interrupt handler to idetape_pc_intr. + * the interrupt handler to ide_pc_intr. * - * 2. On each interrupt, idetape_pc_intr will be called. This step will be + * 2. On each interrupt, ide_pc_intr will be called. This step will be * repeated until the device signals us that no more interrupts will be issued. * * 3. ATAPI Tape media access commands have immediate status with a delayed @@ -827,20 +647,13 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) * again, the callback function will be called and then we will handle the next * request. */ -static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) -{ - idetape_tape_t *tape = drive->driver_data; - - return ide_transfer_pc(drive, tape->pc, idetape_pc_intr, - IDETAPE_WAIT_CMD, NULL); -} static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, struct ide_atapi_pc *pc) { idetape_tape_t *tape = drive->driver_data; - if (tape->pc->c[0] == REQUEST_SENSE && + if (drive->pc->c[0] == REQUEST_SENSE && pc->c[0] == REQUEST_SENSE) { printk(KERN_ERR "ide-tape: possible ide-tape.c bug - " "Two request sense in serial were issued\n"); @@ -848,8 +661,9 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, if (tape->failed_pc == NULL && pc->c[0] != REQUEST_SENSE) tape->failed_pc = pc; + /* Set the current packet command */ - tape->pc = pc; + drive->pc = pc; if (pc->retries > IDETAPE_MAX_PC_RETRIES || (pc->flags & PC_FLAG_ABORT)) { @@ -873,21 +687,20 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, pc->error = IDETAPE_ERROR_GENERAL; } tape->failed_pc = NULL; - drive->pc_callback(drive); + drive->pc_callback(drive, 0); return ide_stopped; } debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]); pc->retries++; - return ide_issue_pc(drive, pc, idetape_transfer_pc, - IDETAPE_WAIT_CMD, NULL); + return ide_issue_pc(drive, WAIT_TAPE_CMD, NULL); } /* A mode sense command is used to "sense" tape parameters. */ static void idetape_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code) { - idetape_init_pc(pc); + ide_init_pc(pc); pc->c[0] = MODE_SENSE; if (page_code != IDETAPE_BLOCK_DESCRIPTOR) /* DBD = 1 - Don't return block descriptors */ @@ -915,19 +728,19 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; idetape_tape_t *tape = drive->driver_data; - struct ide_atapi_pc *pc = tape->pc; + struct ide_atapi_pc *pc = drive->pc; u8 stat; stat = hwif->tp_ops->read_status(hwif); - if (stat & SEEK_STAT) { - if (stat & ERR_STAT) { + if (stat & ATA_DSC) { + if (stat & ATA_ERR) { /* Error detected */ if (pc->c[0] != TEST_UNIT_READY) printk(KERN_ERR "ide-tape: %s: I/O error, ", tape->name); /* Retry operation */ - idetape_retry_pc(drive); + ide_retry_pc(drive, tape->disk); return ide_stopped; } pc->error = 0; @@ -935,7 +748,7 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive) pc->error = IDETAPE_ERROR_GENERAL; tape->failed_pc = NULL; } - drive->pc_callback(drive); + drive->pc_callback(drive, 0); return ide_stopped; } @@ -946,7 +759,7 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape, struct idetape_bh *bh = (struct idetape_bh *)rq->special; unsigned int length = rq->current_nr_sectors; - idetape_init_pc(pc); + ide_init_pc(pc); put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]); pc->c[1] = 1; pc->bh = bh; @@ -978,9 +791,10 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, struct request *postponed_rq = tape->postponed_rq; u8 stat; - debug_log(DBG_SENSE, "sector: %ld, nr_sectors: %ld," - " current_nr_sectors: %d\n", - rq->sector, rq->nr_sectors, rq->current_nr_sectors); + debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %lu," + " current_nr_sectors: %u\n", + (unsigned long long)rq->sector, rq->nr_sectors, + rq->current_nr_sectors); if (!blk_special_request(rq)) { /* We do not support buffer cache originated requests. */ @@ -991,7 +805,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, } /* Retry a failed packet command */ - if (tape->failed_pc && tape->pc->c[0] == REQUEST_SENSE) { + if (tape->failed_pc && drive->pc->c[0] == REQUEST_SENSE) { pc = tape->failed_pc; goto out; } @@ -1012,16 +826,17 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, */ stat = hwif->tp_ops->read_status(hwif); - if (!drive->dsc_overlap && !(rq->cmd[13] & REQ_IDETAPE_PC2)) + if ((drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) == 0 && + (rq->cmd[13] & REQ_IDETAPE_PC2) == 0) set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags); - if (drive->post_reset == 1) { + if (drive->dev_flags & IDE_DFLAG_POST_RESET) { set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags); - drive->post_reset = 0; + drive->dev_flags &= ~IDE_DFLAG_POST_RESET; } if (!test_and_clear_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags) && - (stat & SEEK_STAT) == 0) { + (stat & ATA_DSC) == 0) { if (postponed_rq == NULL) { tape->dsc_polling_start = jiffies; tape->dsc_poll_freq = tape->best_dsc_rw_freq; @@ -1043,12 +858,12 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, return ide_stopped; } if (rq->cmd[13] & REQ_IDETAPE_READ) { - pc = idetape_next_pc_storage(drive); + pc = &tape->queued_pc; ide_tape_create_rw_cmd(tape, pc, rq, READ_6); goto out; } if (rq->cmd[13] & REQ_IDETAPE_WRITE) { - pc = idetape_next_pc_storage(drive); + pc = &tape->queued_pc; ide_tape_create_rw_cmd(tape, pc, rq, WRITE_6); goto out; } @@ -1235,77 +1050,30 @@ static void idetape_init_merge_buffer(idetape_tape_t *tape) static void idetape_create_write_filemark_cmd(ide_drive_t *drive, struct ide_atapi_pc *pc, int write_filemark) { - idetape_init_pc(pc); + ide_init_pc(pc); pc->c[0] = WRITE_FILEMARKS; pc->c[4] = write_filemark; pc->flags |= PC_FLAG_WAIT_FOR_DSC; } -static void idetape_create_test_unit_ready_cmd(struct ide_atapi_pc *pc) -{ - idetape_init_pc(pc); - pc->c[0] = TEST_UNIT_READY; -} - -/* - * We add a special packet command request to the tail of the request queue, and - * wait for it to be serviced. This is not to be called from within the request - * handling part of the driver! We allocate here data on the stack and it is - * valid until the request is finished. This is not the case for the bottom part - * of the driver, where we are always leaving the functions to wait for an - * interrupt or a timer event. - * - * From the bottom part of the driver, we should allocate safe memory using - * idetape_next_pc_storage() and ide_tape_next_rq_storage(), and add the request - * to the request list without waiting for it to be serviced! In that case, we - * usually use idetape_queue_pc_head(). - */ -static int idetape_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc) -{ - struct ide_tape_obj *tape = drive->driver_data; - struct request *rq; - int error; - - rq = blk_get_request(drive->queue, READ, __GFP_WAIT); - rq->cmd_type = REQ_TYPE_SPECIAL; - rq->cmd[13] = REQ_IDETAPE_PC1; - rq->buffer = (char *)pc; - memcpy(rq->cmd, pc->c, 12); - error = blk_execute_rq(drive->queue, tape->disk, rq, 0); - blk_put_request(rq); - return error; -} - -static void idetape_create_load_unload_cmd(ide_drive_t *drive, - struct ide_atapi_pc *pc, int cmd) -{ - idetape_init_pc(pc); - pc->c[0] = START_STOP; - pc->c[4] = cmd; - pc->flags |= PC_FLAG_WAIT_FOR_DSC; -} - static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout) { idetape_tape_t *tape = drive->driver_data; - struct ide_atapi_pc pc; + struct gendisk *disk = tape->disk; int load_attempted = 0; /* Wait for the tape to become ready */ set_bit(IDE_AFLAG_MEDIUM_PRESENT, &drive->atapi_flags); timeout += jiffies; while (time_before(jiffies, timeout)) { - idetape_create_test_unit_ready_cmd(&pc); - if (!idetape_queue_pc_tail(drive, &pc)) + if (ide_do_test_unit_ready(drive, disk) == 0) return 0; if ((tape->sense_key == 2 && tape->asc == 4 && tape->ascq == 2) || (tape->asc == 0x3A)) { /* no media */ if (load_attempted) return -ENOMEDIUM; - idetape_create_load_unload_cmd(drive, &pc, - IDETAPE_LU_LOAD_MASK); - idetape_queue_pc_tail(drive, &pc); + ide_do_start_stop(drive, disk, IDETAPE_LU_LOAD_MASK); load_attempted = 1; /* not about to be ready */ } else if (!(tape->sense_key == 2 && tape->asc == 4 && @@ -1318,11 +1086,12 @@ static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout) static int idetape_flush_tape_buffers(ide_drive_t *drive) { + struct ide_tape_obj *tape = drive->driver_data; struct ide_atapi_pc pc; int rc; idetape_create_write_filemark_cmd(drive, &pc, 0); - rc = idetape_queue_pc_tail(drive, &pc); + rc = ide_queue_pc_tail(drive, tape->disk, &pc); if (rc) return rc; idetape_wait_ready(drive, 60 * 5 * HZ); @@ -1331,7 +1100,7 @@ static int idetape_flush_tape_buffers(ide_drive_t *drive) static void idetape_create_read_position_cmd(struct ide_atapi_pc *pc) { - idetape_init_pc(pc); + ide_init_pc(pc); pc->c[0] = READ_POSITION; pc->req_xfer = 20; } @@ -1345,7 +1114,7 @@ static int idetape_read_position(ide_drive_t *drive) debug_log(DBG_PROCS, "Enter %s\n", __func__); idetape_create_read_position_cmd(&pc); - if (idetape_queue_pc_tail(drive, &pc)) + if (ide_queue_pc_tail(drive, tape->disk, &pc)) return -1; position = tape->first_frame; return position; @@ -1355,7 +1124,7 @@ static void idetape_create_locate_cmd(ide_drive_t *drive, struct ide_atapi_pc *pc, unsigned int block, u8 partition, int skip) { - idetape_init_pc(pc); + ide_init_pc(pc); pc->c[0] = POSITION_TO_ELEMENT; pc->c[1] = 2; put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[3]); @@ -1363,21 +1132,6 @@ static void idetape_create_locate_cmd(ide_drive_t *drive, pc->flags |= PC_FLAG_WAIT_FOR_DSC; } -static int idetape_create_prevent_cmd(ide_drive_t *drive, - struct ide_atapi_pc *pc, int prevent) -{ - idetape_tape_t *tape = drive->driver_data; - - /* device supports locking according to capabilities page */ - if (!(tape->caps[6] & 0x01)) - return 0; - - idetape_init_pc(pc); - pc->c[0] = ALLOW_MEDIUM_REMOVAL; - pc->c[4] = prevent; - return 1; -} - static void __ide_tape_discard_merge_buffer(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; @@ -1405,6 +1159,7 @@ static int idetape_position_tape(ide_drive_t *drive, unsigned int block, u8 partition, int skip) { idetape_tape_t *tape = drive->driver_data; + struct gendisk *disk = tape->disk; int retval; struct ide_atapi_pc pc; @@ -1412,12 +1167,12 @@ static int idetape_position_tape(ide_drive_t *drive, unsigned int block, __ide_tape_discard_merge_buffer(drive); idetape_wait_ready(drive, 60 * 5 * HZ); idetape_create_locate_cmd(drive, &pc, block, partition, skip); - retval = idetape_queue_pc_tail(drive, &pc); + retval = ide_queue_pc_tail(drive, disk, &pc); if (retval) return (retval); idetape_create_read_position_cmd(&pc); - return (idetape_queue_pc_tail(drive, &pc)); + return ide_queue_pc_tail(drive, disk, &pc); } static void ide_tape_discard_merge_buffer(ide_drive_t *drive, @@ -1477,7 +1232,7 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, static void idetape_create_inquiry_cmd(struct ide_atapi_pc *pc) { - idetape_init_pc(pc); + ide_init_pc(pc); pc->c[0] = INQUIRY; pc->c[4] = 254; pc->req_xfer = 254; @@ -1486,14 +1241,14 @@ static void idetape_create_inquiry_cmd(struct ide_atapi_pc *pc) static void idetape_create_rewind_cmd(ide_drive_t *drive, struct ide_atapi_pc *pc) { - idetape_init_pc(pc); + ide_init_pc(pc); pc->c[0] = REZERO_UNIT; pc->flags |= PC_FLAG_WAIT_FOR_DSC; } static void idetape_create_erase_cmd(struct ide_atapi_pc *pc) { - idetape_init_pc(pc); + ide_init_pc(pc); pc->c[0] = ERASE; pc->c[1] = 1; pc->flags |= PC_FLAG_WAIT_FOR_DSC; @@ -1501,7 +1256,7 @@ static void idetape_create_erase_cmd(struct ide_atapi_pc *pc) static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd) { - idetape_init_pc(pc); + ide_init_pc(pc); pc->c[0] = SPACE; put_unaligned(cpu_to_be32(count), (unsigned int *) &pc->c[1]); pc->c[1] = cmd; @@ -1600,7 +1355,7 @@ static int idetape_init_read(ide_drive_t *drive) * No point in issuing this if DSC overlap isn't supported, some * drives (Seagate STT3401A) will return an error. */ - if (drive->dsc_overlap) { + if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) { bytes_read = idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, 0, tape->merge_bh); @@ -1664,20 +1419,20 @@ static void idetape_pad_zeros(ide_drive_t *drive, int bcount) */ static int idetape_rewind_tape(ide_drive_t *drive) { + struct ide_tape_obj *tape = drive->driver_data; + struct gendisk *disk = tape->disk; int retval; struct ide_atapi_pc pc; - idetape_tape_t *tape; - tape = drive->driver_data; debug_log(DBG_SENSE, "Enter %s\n", __func__); idetape_create_rewind_cmd(drive, &pc); - retval = idetape_queue_pc_tail(drive, &pc); + retval = ide_queue_pc_tail(drive, disk, &pc); if (retval) return retval; idetape_create_read_position_cmd(&pc); - retval = idetape_queue_pc_tail(drive, &pc); + retval = ide_queue_pc_tail(drive, disk, &pc); if (retval) return retval; return 0; @@ -1720,6 +1475,7 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op, int mt_count) { idetape_tape_t *tape = drive->driver_data; + struct gendisk *disk = tape->disk; struct ide_atapi_pc pc; int retval, count = 0; int sprev = !!(tape->caps[4] & 0x20); @@ -1744,7 +1500,7 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op, case MTBSF: idetape_create_space_cmd(&pc, mt_count - count, IDETAPE_SPACE_OVER_FILEMARK); - return idetape_queue_pc_tail(drive, &pc); + return ide_queue_pc_tail(drive, disk, &pc); case MTFSFM: case MTBSFM: if (!sprev) @@ -1780,7 +1536,7 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op, static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { - struct ide_tape_obj *tape = ide_tape_f(file); + struct ide_tape_obj *tape = file->private_data; ide_drive_t *drive = tape->drive; ssize_t bytes_read, temp, actually_read = 0, rc; ssize_t ret = 0; @@ -1842,7 +1598,7 @@ finish: static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { - struct ide_tape_obj *tape = ide_tape_f(file); + struct ide_tape_obj *tape = file->private_data; ide_drive_t *drive = tape->drive; ssize_t actually_written = 0; ssize_t ret = 0; @@ -1875,7 +1631,7 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, * point in issuing this if DSC overlap isn't supported, some * drives (Seagate STT3401A) will return an error. */ - if (drive->dsc_overlap) { + if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) { ssize_t retval = idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, 0, tape->merge_bh); @@ -1933,11 +1689,12 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, static int idetape_write_filemark(ide_drive_t *drive) { + struct ide_tape_obj *tape = drive->driver_data; struct ide_atapi_pc pc; /* Write a filemark */ idetape_create_write_filemark_cmd(drive, &pc, 1); - if (idetape_queue_pc_tail(drive, &pc)) { + if (ide_queue_pc_tail(drive, tape->disk, &pc)) { printk(KERN_ERR "ide-tape: Couldn't write a filemark\n"); return -EIO; } @@ -1960,6 +1717,7 @@ static int idetape_write_filemark(ide_drive_t *drive) static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count) { idetape_tape_t *tape = drive->driver_data; + struct gendisk *disk = tape->disk; struct ide_atapi_pc pc; int i, retval; @@ -1996,9 +1754,7 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count) return 0; case MTLOAD: ide_tape_discard_merge_buffer(drive, 0); - idetape_create_load_unload_cmd(drive, &pc, - IDETAPE_LU_LOAD_MASK); - return idetape_queue_pc_tail(drive, &pc); + return ide_do_start_stop(drive, disk, IDETAPE_LU_LOAD_MASK); case MTUNLOAD: case MTOFFL: /* @@ -2006,14 +1762,11 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count) * attempting to eject. */ if (tape->door_locked) { - if (idetape_create_prevent_cmd(drive, &pc, 0)) - if (!idetape_queue_pc_tail(drive, &pc)) - tape->door_locked = DOOR_UNLOCKED; + if (!ide_set_media_lock(drive, disk, 0)) + tape->door_locked = DOOR_UNLOCKED; } ide_tape_discard_merge_buffer(drive, 0); - idetape_create_load_unload_cmd(drive, &pc, - !IDETAPE_LU_LOAD_MASK); - retval = idetape_queue_pc_tail(drive, &pc); + retval = ide_do_start_stop(drive, disk, !IDETAPE_LU_LOAD_MASK); if (!retval) clear_bit(IDE_AFLAG_MEDIUM_PRESENT, &drive->atapi_flags); return retval; @@ -2022,16 +1775,15 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count) return idetape_flush_tape_buffers(drive); case MTRETEN: ide_tape_discard_merge_buffer(drive, 0); - idetape_create_load_unload_cmd(drive, &pc, + return ide_do_start_stop(drive, disk, IDETAPE_LU_RETENSION_MASK | IDETAPE_LU_LOAD_MASK); - return idetape_queue_pc_tail(drive, &pc); case MTEOM: idetape_create_space_cmd(&pc, 0, IDETAPE_SPACE_TO_EOD); - return idetape_queue_pc_tail(drive, &pc); + return ide_queue_pc_tail(drive, disk, &pc); case MTERASE: (void)idetape_rewind_tape(drive); idetape_create_erase_cmd(&pc); - return idetape_queue_pc_tail(drive, &pc); + return ide_queue_pc_tail(drive, disk, &pc); case MTSETBLK: if (mt_count) { if (mt_count < tape->blk_size || @@ -2052,17 +1804,13 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count) case MTFSR: case MTBSR: case MTLOCK: - if (!idetape_create_prevent_cmd(drive, &pc, 1)) - return 0; - retval = idetape_queue_pc_tail(drive, &pc); + retval = ide_set_media_lock(drive, disk, 1); if (retval) return retval; tape->door_locked = DOOR_EXPLICITLY_LOCKED; return 0; case MTUNLOCK: - if (!idetape_create_prevent_cmd(drive, &pc, 0)) - return 0; - retval = idetape_queue_pc_tail(drive, &pc); + retval = ide_set_media_lock(drive, disk, 0); if (retval) return retval; tape->door_locked = DOOR_UNLOCKED; @@ -2082,7 +1830,7 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count) static int idetape_chrdev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { - struct ide_tape_obj *tape = ide_tape_f(file); + struct ide_tape_obj *tape = file->private_data; ide_drive_t *drive = tape->drive; struct mtop mtop; struct mtget mtget; @@ -2144,7 +1892,7 @@ static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive) struct ide_atapi_pc pc; idetape_create_mode_sense_cmd(&pc, IDETAPE_BLOCK_DESCRIPTOR); - if (idetape_queue_pc_tail(drive, &pc)) { + if (ide_queue_pc_tail(drive, tape->disk, &pc)) { printk(KERN_ERR "ide-tape: Can't get block descriptor\n"); if (tape->blk_size == 0) { printk(KERN_WARNING "ide-tape: Cannot deal with zero " @@ -2164,7 +1912,6 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp) unsigned int minor = iminor(inode), i = minor & ~0xc0; ide_drive_t *drive; idetape_tape_t *tape; - struct ide_atapi_pc pc; int retval; if (i >= MAX_HWIFS * MAX_DRIVES) @@ -2227,11 +1974,9 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp) /* Lock the tape drive door so user can't eject. */ if (tape->chrdev_dir == IDETAPE_DIR_NONE) { - if (idetape_create_prevent_cmd(drive, &pc, 1)) { - if (!idetape_queue_pc_tail(drive, &pc)) { - if (tape->door_locked != DOOR_EXPLICITLY_LOCKED) - tape->door_locked = DOOR_LOCKED; - } + if (!ide_set_media_lock(drive, tape->disk, 1)) { + if (tape->door_locked != DOOR_EXPLICITLY_LOCKED) + tape->door_locked = DOOR_LOCKED; } } unlock_kernel(); @@ -2262,9 +2007,8 @@ static void idetape_write_release(ide_drive_t *drive, unsigned int minor) static int idetape_chrdev_release(struct inode *inode, struct file *filp) { - struct ide_tape_obj *tape = ide_tape_f(filp); + struct ide_tape_obj *tape = filp->private_data; ide_drive_t *drive = tape->drive; - struct ide_atapi_pc pc; unsigned int minor = iminor(inode); lock_kernel(); @@ -2283,10 +2027,8 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp) (void) idetape_rewind_tape(drive); if (tape->chrdev_dir == IDETAPE_DIR_NONE) { if (tape->door_locked == DOOR_LOCKED) { - if (idetape_create_prevent_cmd(drive, &pc, 0)) { - if (!idetape_queue_pc_tail(drive, &pc)) - tape->door_locked = DOOR_UNLOCKED; - } + if (!ide_set_media_lock(drive, tape->disk, 0)) + tape->door_locked = DOOR_UNLOCKED; } } clear_bit(IDE_AFLAG_BUSY, &drive->atapi_flags); @@ -2295,53 +2037,14 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp) return 0; } -/* - * check the contents of the ATAPI IDENTIFY command results. We return: - * - * 1 - If the tape can be supported by us, based on the information we have so - * far. - * - * 0 - If this tape driver is not currently supported by us. - */ -static int idetape_identify_device(ide_drive_t *drive) -{ - u8 gcw[2], protocol, device_type, removable, packet_size; - - if (drive->id_read == 0) - return 1; - - *((unsigned short *) &gcw) = drive->id->config; - - protocol = (gcw[1] & 0xC0) >> 6; - device_type = gcw[1] & 0x1F; - removable = !!(gcw[0] & 0x80); - packet_size = gcw[0] & 0x3; - - /* Check that we can support this device */ - if (protocol != 2) - printk(KERN_ERR "ide-tape: Protocol (0x%02x) is not ATAPI\n", - protocol); - else if (device_type != 1) - printk(KERN_ERR "ide-tape: Device type (0x%02x) is not set " - "to tape\n", device_type); - else if (!removable) - printk(KERN_ERR "ide-tape: The removable flag is not set\n"); - else if (packet_size != 0) { - printk(KERN_ERR "ide-tape: Packet size (0x%02x) is not 12" - " bytes\n", packet_size); - } else - return 1; - return 0; -} - static void idetape_get_inquiry_results(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; struct ide_atapi_pc pc; - char fw_rev[6], vendor_id[10], product_id[18]; + char fw_rev[4], vendor_id[8], product_id[16]; idetape_create_inquiry_cmd(&pc); - if (idetape_queue_pc_tail(drive, &pc)) { + if (ide_queue_pc_tail(drive, tape->disk, &pc)) { printk(KERN_ERR "ide-tape: %s: can't get INQUIRY results\n", tape->name); return; @@ -2350,11 +2053,11 @@ static void idetape_get_inquiry_results(ide_drive_t *drive) memcpy(product_id, &pc.buf[16], 16); memcpy(fw_rev, &pc.buf[32], 4); - ide_fixstring(vendor_id, 10, 0); - ide_fixstring(product_id, 18, 0); - ide_fixstring(fw_rev, 6, 0); + ide_fixstring(vendor_id, 8, 0); + ide_fixstring(product_id, 16, 0); + ide_fixstring(fw_rev, 4, 0); - printk(KERN_INFO "ide-tape: %s <-> %s: %s %s rev %s\n", + printk(KERN_INFO "ide-tape: %s <-> %s: %.8s %.16s rev %.4s\n", drive->name, tape->name, vendor_id, product_id, fw_rev); } @@ -2370,7 +2073,7 @@ static void idetape_get_mode_sense_results(ide_drive_t *drive) u8 speed, max_speed; idetape_create_mode_sense_cmd(&pc, IDETAPE_CAPABILITIES_PAGE); - if (idetape_queue_pc_tail(drive, &pc)) { + if (ide_queue_pc_tail(drive, tape->disk, &pc)) { printk(KERN_ERR "ide-tape: Can't get tape parameters - assuming" " some default values\n"); tape->blk_size = 512; @@ -2402,6 +2105,11 @@ static void idetape_get_mode_sense_results(ide_drive_t *drive) } memcpy(&tape->caps, caps, 20); + + /* device lacks locking support according to capabilities page */ + if ((caps[6] & 1) == 0) + drive->atapi_flags |= IDE_AFLAG_NO_DOORLOCK; + if (caps[7] & 0x02) tape->blk_size = 512; else if (caps[7] & 0x04) @@ -2409,28 +2117,56 @@ static void idetape_get_mode_sense_results(ide_drive_t *drive) } #ifdef CONFIG_IDE_PROC_FS -static void idetape_add_settings(ide_drive_t *drive) -{ - idetape_tape_t *tape = drive->driver_data; - - ide_add_setting(drive, "buffer", SETTING_READ, TYPE_SHORT, 0, 0xffff, - 1, 2, (u16 *)&tape->caps[16], NULL); - ide_add_setting(drive, "speed", SETTING_READ, TYPE_SHORT, 0, 0xffff, - 1, 1, (u16 *)&tape->caps[14], NULL); - ide_add_setting(drive, "buffer_size", SETTING_READ, TYPE_INT, 0, 0xffff, - 1, 1024, &tape->buffer_size, NULL); - ide_add_setting(drive, "tdsc", SETTING_RW, TYPE_INT, IDETAPE_DSC_RW_MIN, - IDETAPE_DSC_RW_MAX, 1000, HZ, &tape->best_dsc_rw_freq, - NULL); - ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1, - 1, &drive->dsc_overlap, NULL); - ide_add_setting(drive, "avg_speed", SETTING_READ, TYPE_INT, 0, 0xffff, - 1, 1, &tape->avg_speed, NULL); - ide_add_setting(drive, "debug_mask", SETTING_RW, TYPE_INT, 0, 0xffff, 1, - 1, &tape->debug_mask, NULL); -} -#else -static inline void idetape_add_settings(ide_drive_t *drive) { ; } +#define ide_tape_devset_get(name, field) \ +static int get_##name(ide_drive_t *drive) \ +{ \ + idetape_tape_t *tape = drive->driver_data; \ + return tape->field; \ +} + +#define ide_tape_devset_set(name, field) \ +static int set_##name(ide_drive_t *drive, int arg) \ +{ \ + idetape_tape_t *tape = drive->driver_data; \ + tape->field = arg; \ + return 0; \ +} + +#define ide_tape_devset_rw_field(_name, _field) \ +ide_tape_devset_get(_name, _field) \ +ide_tape_devset_set(_name, _field) \ +IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name) + +#define ide_tape_devset_r_field(_name, _field) \ +ide_tape_devset_get(_name, _field) \ +IDE_DEVSET(_name, 0, get_##_name, NULL) + +static int mulf_tdsc(ide_drive_t *drive) { return 1000; } +static int divf_tdsc(ide_drive_t *drive) { return HZ; } +static int divf_buffer(ide_drive_t *drive) { return 2; } +static int divf_buffer_size(ide_drive_t *drive) { return 1024; } + +ide_devset_rw_flag(dsc_overlap, IDE_DFLAG_DSC_OVERLAP); + +ide_tape_devset_rw_field(debug_mask, debug_mask); +ide_tape_devset_rw_field(tdsc, best_dsc_rw_freq); + +ide_tape_devset_r_field(avg_speed, avg_speed); +ide_tape_devset_r_field(speed, caps[14]); +ide_tape_devset_r_field(buffer, caps[16]); +ide_tape_devset_r_field(buffer_size, buffer_size); + +static const struct ide_proc_devset idetape_settings[] = { + __IDE_PROC_DEVSET(avg_speed, 0, 0xffff, NULL, NULL), + __IDE_PROC_DEVSET(buffer, 0, 0xffff, NULL, divf_buffer), + __IDE_PROC_DEVSET(buffer_size, 0, 0xffff, NULL, divf_buffer_size), + __IDE_PROC_DEVSET(debug_mask, 0, 0xffff, NULL, NULL), + __IDE_PROC_DEVSET(dsc_overlap, 0, 1, NULL, NULL), + __IDE_PROC_DEVSET(speed, 0, 0xffff, NULL, NULL), + __IDE_PROC_DEVSET(tdsc, IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX, + mulf_tdsc, divf_tdsc), + { 0 }, +}; #endif /* @@ -2449,32 +2185,31 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor) unsigned long t; int speed; int buffer_size; - u8 gcw[2]; u16 *ctl = (u16 *)&tape->caps[12]; - drive->pc_callback = ide_tape_callback; + drive->pc_callback = ide_tape_callback; + drive->pc_update_buffers = idetape_update_buffers; + drive->pc_io_buffers = ide_tape_io_buffers; spin_lock_init(&tape->lock); - drive->dsc_overlap = 1; + + drive->dev_flags |= IDE_DFLAG_DSC_OVERLAP; + if (drive->hwif->host_flags & IDE_HFLAG_NO_DSC) { printk(KERN_INFO "ide-tape: %s: disabling DSC overlap\n", tape->name); - drive->dsc_overlap = 0; + drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP; } + /* Seagate Travan drives do not support DSC overlap. */ - if (strstr(drive->id->model, "Seagate STT3401")) - drive->dsc_overlap = 0; + if (strstr((char *)&drive->id[ATA_ID_PROD], "Seagate STT3401")) + drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP; + tape->minor = minor; tape->name[0] = 'h'; tape->name[1] = 't'; tape->name[2] = '0' + minor; tape->chrdev_dir = IDETAPE_DIR_NONE; - tape->pc = tape->pc_stack; - *((unsigned short *) &gcw) = drive->id->config; - - /* Command packet DRQ type */ - if (((gcw[0] & 0x60) >> 5) == 1) - set_bit(IDE_AFLAG_DRQ_INTERRUPT, &drive->atapi_flags); idetape_get_inquiry_results(drive); idetape_get_mode_sense_results(drive); @@ -2510,9 +2245,9 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor) (*(u16 *)&tape->caps[16] * 512) / tape->buffer_size, tape->buffer_size / 1024, tape->best_dsc_rw_freq * 1000 / HZ, - drive->using_dma ? ", DMA":""); + (drive->dev_flags & IDE_DFLAG_USING_DMA) ? ", DMA" : ""); - idetape_add_settings(drive); + ide_proc_register_driver(drive, tape->driver); } static void ide_tape_remove(ide_drive_t *drive) @@ -2528,13 +2263,13 @@ static void ide_tape_remove(ide_drive_t *drive) static void ide_tape_release(struct kref *kref) { - struct ide_tape_obj *tape = to_ide_tape(kref); + struct ide_tape_obj *tape = to_ide_drv(kref, ide_tape_obj); ide_drive_t *drive = tape->drive; struct gendisk *g = tape->disk; BUG_ON(tape->merge_bh_size); - drive->dsc_overlap = 0; + drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP; drive->driver_data = NULL; device_destroy(idetape_sysfs_class, MKDEV(IDETAPE_MAJOR, tape->minor)); device_destroy(idetape_sysfs_class, @@ -2576,13 +2311,12 @@ static ide_driver_t idetape_driver = { .probe = ide_tape_probe, .remove = ide_tape_remove, .version = IDETAPE_VERSION, - .media = ide_tape, - .supports_dsc_overlap = 1, .do_request = idetape_do_request, .end_request = idetape_end_request, .error = __ide_error, #ifdef CONFIG_IDE_PROC_FS .proc = idetape_proc, + .settings = idetape_settings, #endif }; @@ -2611,7 +2345,7 @@ static int idetape_open(struct inode *inode, struct file *filp) static int idetape_release(struct inode *inode, struct file *filp) { struct gendisk *disk = inode->i_bdev->bd_disk; - struct ide_tape_obj *tape = ide_tape_g(disk); + struct ide_tape_obj *tape = ide_drv_g(disk, ide_tape_obj); ide_tape_put(tape); @@ -2622,7 +2356,7 @@ static int idetape_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { struct block_device *bdev = inode->i_bdev; - struct ide_tape_obj *tape = ide_tape_g(bdev->bd_disk); + struct ide_tape_obj *tape = ide_drv_g(bdev->bd_disk, ide_tape_obj); ide_drive_t *drive = tape->drive; int err = generic_ide_ioctl(drive, file, bdev, cmd, arg); if (err == -EINVAL) @@ -2645,11 +2379,12 @@ static int ide_tape_probe(ide_drive_t *drive) if (!strstr("ide-tape", drive->driver_req)) goto failed; - if (!drive->present) - goto failed; + if (drive->media != ide_tape) goto failed; - if (!idetape_identify_device(drive)) { + + if ((drive->dev_flags & IDE_DFLAG_ID_READ) && + ide_check_atapi_device(drive, DRV_NAME) == 0) { printk(KERN_ERR "ide-tape: %s: not supported by this version of" " the driver\n", drive->name); goto failed; @@ -2667,8 +2402,6 @@ static int ide_tape_probe(ide_drive_t *drive) ide_init_disk(g, drive); - ide_proc_register_driver(drive, &idetape_driver); - kref_init(&tape->kref); tape->drive = drive; diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 7fb6f1c8627..bf4fb9d8d17 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -44,18 +44,15 @@ int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf) memset(&args, 0, sizeof(ide_task_t)); args.tf.nsect = 0x01; if (drive->media == ide_disk) - args.tf.command = WIN_IDENTIFY; + args.tf.command = ATA_CMD_ID_ATA; else - args.tf.command = WIN_PIDENTIFY; + args.tf.command = ATA_CMD_ID_ATAPI; args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; args.data_phase = TASKFILE_IN; return ide_raw_taskfile(drive, &args, buf, 1); } static ide_startstop_t task_no_data_intr(ide_drive_t *); -static ide_startstop_t set_geometry_intr(ide_drive_t *); -static ide_startstop_t recal_intr(ide_drive_t *); -static ide_startstop_t set_multmode_intr(ide_drive_t *); static ide_startstop_t pre_task_out_intr(ide_drive_t *, struct request *); static ide_startstop_t task_in_intr(ide_drive_t *); @@ -79,6 +76,8 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) if (task->tf_flags & IDE_TFLAG_FLAGGED) task->tf_flags |= IDE_TFLAG_FLAGGED_SET_IN_FLAGS; + memcpy(&hwif->task, task, sizeof(*task)); + if ((task->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0) { ide_tf_dump(drive->name, tf); tp_ops->set_irq(hwif, 1); @@ -99,19 +98,12 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) case TASKFILE_NO_DATA: if (handler == NULL) handler = task_no_data_intr; - /* WIN_{SPECIFY,RESTORE,SETMULT} use custom handlers */ - if (task->tf_flags & IDE_TFLAG_CUSTOM_HANDLER) { - switch (tf->command) { - case WIN_SPECIFY: handler = set_geometry_intr; break; - case WIN_RESTORE: handler = recal_intr; break; - case WIN_SETMULT: handler = set_multmode_intr; break; - } - } ide_execute_command(drive, tf->command, handler, WAIT_WORSTCASE, NULL); return ide_started; default: - if (drive->using_dma == 0 || dma_ops->dma_setup(drive)) + if ((drive->dev_flags & IDE_DFLAG_USING_DMA) == 0 || + dma_ops->dma_setup(drive)) return ide_stopped; dma_ops->dma_exec_cmd(drive, tf->command); dma_ops->dma_start(drive); @@ -121,88 +113,56 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) EXPORT_SYMBOL_GPL(do_rw_taskfile); /* - * set_multmode_intr() is invoked on completion of a WIN_SETMULT cmd. - */ -static ide_startstop_t set_multmode_intr(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - u8 stat; - - local_irq_enable_in_hardirq(); - stat = hwif->tp_ops->read_status(hwif); - - if (OK_STAT(stat, READY_STAT, BAD_STAT)) - drive->mult_count = drive->mult_req; - else { - drive->mult_req = drive->mult_count = 0; - drive->special.b.recalibrate = 1; - (void) ide_dump_status(drive, "set_multmode", stat); - } - return ide_stopped; -} - -/* - * set_geometry_intr() is invoked on completion of a WIN_SPECIFY cmd. + * Handler for commands without a data phase */ -static ide_startstop_t set_geometry_intr(ide_drive_t *drive) +static ide_startstop_t task_no_data_intr(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - int retries = 5; + ide_task_t *task = &hwif->task; + struct ide_taskfile *tf = &task->tf; + int custom = (task->tf_flags & IDE_TFLAG_CUSTOM_HANDLER) ? 1 : 0; + int retries = (custom && tf->command == ATA_CMD_INIT_DEV_PARAMS) ? 5 : 1; u8 stat; local_irq_enable_in_hardirq(); while (1) { stat = hwif->tp_ops->read_status(hwif); - if ((stat & BUSY_STAT) == 0 || retries-- == 0) + if ((stat & ATA_BUSY) == 0 || retries-- == 0) break; udelay(10); }; - if (OK_STAT(stat, READY_STAT, BAD_STAT)) - return ide_stopped; - - if (stat & (ERR_STAT|DRQ_STAT)) - return ide_error(drive, "set_geometry_intr", stat); - - ide_set_handler(drive, &set_geometry_intr, WAIT_WORSTCASE, NULL); - return ide_started; -} - -/* - * recal_intr() is invoked on completion of a WIN_RESTORE (recalibrate) cmd. - */ -static ide_startstop_t recal_intr(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - u8 stat; - - local_irq_enable_in_hardirq(); - stat = hwif->tp_ops->read_status(hwif); - - if (!OK_STAT(stat, READY_STAT, BAD_STAT)) - return ide_error(drive, "recal_intr", stat); - return ide_stopped; -} - -/* - * Handler for commands without a data phase - */ -static ide_startstop_t task_no_data_intr(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - ide_task_t *args = hwif->hwgroup->rq->special; - u8 stat; - - local_irq_enable_in_hardirq(); - stat = hwif->tp_ops->read_status(hwif); - - if (!OK_STAT(stat, READY_STAT, BAD_STAT)) + if (!OK_STAT(stat, ATA_DRDY, BAD_STAT)) { + if (custom && tf->command == ATA_CMD_SET_MULTI) { + drive->mult_req = drive->mult_count = 0; + drive->special.b.recalibrate = 1; + (void)ide_dump_status(drive, __func__, stat); + return ide_stopped; + } else if (custom && tf->command == ATA_CMD_INIT_DEV_PARAMS) { + if ((stat & (ATA_ERR | ATA_DRQ)) == 0) { + ide_set_handler(drive, &task_no_data_intr, + WAIT_WORSTCASE, NULL); + return ide_started; + } + } return ide_error(drive, "task_no_data_intr", stat); /* calls ide_end_drive_cmd */ + } - if (args) + if (!custom) ide_end_drive_cmd(drive, stat, ide_read_error(drive)); + else if (tf->command == ATA_CMD_IDLEIMMEDIATE) { + hwif->tp_ops->tf_read(drive, task); + if (tf->lbal != 0xc4) { + printk(KERN_ERR "%s: head unload failed!\n", + drive->name); + ide_tf_dump(drive->name, tf); + } else + drive->dev_flags |= IDE_DFLAG_PARKED; + ide_end_drive_cmd(drive, stat, ide_read_error(drive)); + } else if (tf->command == ATA_CMD_SET_MULTI) + drive->mult_count = drive->mult_req; return ide_stopped; } @@ -220,13 +180,13 @@ static u8 wait_drive_not_busy(ide_drive_t *drive) for (retries = 0; retries < 1000; retries++) { stat = hwif->tp_ops->read_status(hwif); - if (stat & BUSY_STAT) + if (stat & ATA_BUSY) udelay(10); else break; } - if (stat & BUSY_STAT) + if (stat & ATA_BUSY) printk(KERN_ERR "%s: drive still BUSY!\n", drive->name); return stat; @@ -385,7 +345,7 @@ void task_end_request(ide_drive_t *drive, struct request *rq, u8 stat) static ide_startstop_t task_in_unexpected(ide_drive_t *drive, struct request *rq, u8 stat) { /* Command all done? */ - if (OK_STAT(stat, READY_STAT, BUSY_STAT)) { + if (OK_STAT(stat, ATA_DRDY, ATA_BUSY)) { task_end_request(drive, rq, stat); return ide_stopped; } @@ -405,11 +365,11 @@ static ide_startstop_t task_in_intr(ide_drive_t *drive) u8 stat = hwif->tp_ops->read_status(hwif); /* Error? */ - if (stat & ERR_STAT) + if (stat & ATA_ERR) return task_error(drive, rq, __func__, stat); /* Didn't want any data? Odd. */ - if (!(stat & DRQ_STAT)) + if ((stat & ATA_DRQ) == 0) return task_in_unexpected(drive, rq, stat); ide_pio_datablock(drive, rq, 0); @@ -442,7 +402,7 @@ static ide_startstop_t task_out_intr (ide_drive_t *drive) return task_error(drive, rq, __func__, stat); /* Deal with unexpected ATA data phase. */ - if (((stat & DRQ_STAT) == 0) ^ !hwif->nleft) + if (((stat & ATA_DRQ) == 0) ^ !hwif->nleft) return task_error(drive, rq, __func__, stat); if (!hwif->nleft) { @@ -461,16 +421,15 @@ static ide_startstop_t pre_task_out_intr(ide_drive_t *drive, struct request *rq) { ide_startstop_t startstop; - if (ide_wait_stat(&startstop, drive, DRQ_STAT, + if (ide_wait_stat(&startstop, drive, ATA_DRQ, drive->bad_wstat, WAIT_DRQ)) { printk(KERN_ERR "%s: no DRQ after issuing %sWRITE%s\n", - drive->name, - drive->hwif->data_phase ? "MULT" : "", - drive->addressing ? "_EXT" : ""); + drive->name, drive->hwif->data_phase ? "MULT" : "", + (drive->dev_flags & IDE_DFLAG_LBA48) ? "_EXT" : ""); return startstop; } - if (!drive->unmask) + if ((drive->dev_flags & IDE_DFLAG_UNMASK) == 0) local_irq_disable(); ide_set_handler(drive, &task_out_intr, WAIT_WORSTCASE, NULL); @@ -586,7 +545,7 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) args.tf_flags = IDE_TFLAG_IO_16BIT | IDE_TFLAG_DEVICE | IDE_TFLAG_IN_TF; - if (drive->addressing == 1) + if (drive->dev_flags & IDE_DFLAG_LBA48) args.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_IN_HOB); if (req_task->out_flags.all) { @@ -689,7 +648,7 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) if ((args.tf_flags & IDE_TFLAG_FLAGGED_SET_IN_FLAGS) && req_task->in_flags.all == 0) { req_task->in_flags.all = IDE_TASKFILE_STD_IN_FLAGS; - if (drive->addressing == 1) + if (drive->dev_flags & IDE_DFLAG_LBA48) req_task->in_flags.all |= (IDE_HOB_STD_IN_FLAGS << 8); } @@ -721,110 +680,3 @@ abort: return err; } #endif - -int ide_cmd_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) -{ - u8 *buf = NULL; - int bufsize = 0, err = 0; - u8 args[4], xfer_rate = 0; - ide_task_t tfargs; - struct ide_taskfile *tf = &tfargs.tf; - struct hd_driveid *id = drive->id; - - if (NULL == (void *) arg) { - struct request *rq; - - rq = blk_get_request(drive->queue, READ, __GFP_WAIT); - rq->cmd_type = REQ_TYPE_ATA_TASKFILE; - err = blk_execute_rq(drive->queue, NULL, rq, 0); - blk_put_request(rq); - - return err; - } - - if (copy_from_user(args, (void __user *)arg, 4)) - return -EFAULT; - - memset(&tfargs, 0, sizeof(ide_task_t)); - tf->feature = args[2]; - if (args[0] == WIN_SMART) { - tf->nsect = args[3]; - tf->lbal = args[1]; - tf->lbam = 0x4f; - tf->lbah = 0xc2; - tfargs.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_IN_NSECT; - } else { - tf->nsect = args[1]; - tfargs.tf_flags = IDE_TFLAG_OUT_FEATURE | - IDE_TFLAG_OUT_NSECT | IDE_TFLAG_IN_NSECT; - } - tf->command = args[0]; - tfargs.data_phase = args[3] ? TASKFILE_IN : TASKFILE_NO_DATA; - - if (args[3]) { - tfargs.tf_flags |= IDE_TFLAG_IO_16BIT; - bufsize = SECTOR_WORDS * 4 * args[3]; - buf = kzalloc(bufsize, GFP_KERNEL); - if (buf == NULL) - return -ENOMEM; - } - - if (tf->command == WIN_SETFEATURES && - tf->feature == SETFEATURES_XFER && - tf->nsect >= XFER_SW_DMA_0 && - (id->dma_ultra || id->dma_mword || id->dma_1word)) { - xfer_rate = args[1]; - if (tf->nsect > XFER_UDMA_2 && !eighty_ninty_three(drive)) { - printk(KERN_WARNING "%s: UDMA speeds >UDMA33 cannot " - "be set\n", drive->name); - goto abort; - } - } - - err = ide_raw_taskfile(drive, &tfargs, buf, args[3]); - - args[0] = tf->status; - args[1] = tf->error; - args[2] = tf->nsect; - - if (!err && xfer_rate) { - /* active-retuning-calls future */ - ide_set_xfer_rate(drive, xfer_rate); - ide_driveid_update(drive); - } -abort: - if (copy_to_user((void __user *)arg, &args, 4)) - err = -EFAULT; - if (buf) { - if (copy_to_user((void __user *)(arg + 4), buf, bufsize)) - err = -EFAULT; - kfree(buf); - } - return err; -} - -int ide_task_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) -{ - void __user *p = (void __user *)arg; - int err = 0; - u8 args[7]; - ide_task_t task; - - if (copy_from_user(args, p, 7)) - return -EFAULT; - - memset(&task, 0, sizeof(task)); - memcpy(&task.tf_array[7], &args[1], 6); - task.tf.command = args[0]; - task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; - - err = ide_no_data_taskfile(drive, &task); - - args[0] = task.tf.command; - memcpy(&args[1], &task.tf_array[7], 6); - - if (copy_to_user(p, args, 7)) - err = -EFAULT; - - return err; -} diff --git a/drivers/ide/ide-timings.c b/drivers/ide/ide-timings.c index 8c2f8327f48..81f527af8fa 100644 --- a/drivers/ide/ide-timings.c +++ b/drivers/ide/ide-timings.c @@ -22,7 +22,6 @@ */ #include <linux/kernel.h> -#include <linux/hdreg.h> #include <linux/ide.h> #include <linux/module.h> @@ -78,15 +77,15 @@ EXPORT_SYMBOL_GPL(ide_timing_find_mode); u16 ide_pio_cycle_time(ide_drive_t *drive, u8 pio) { - struct hd_driveid *id = drive->id; + u16 *id = drive->id; struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); u16 cycle = 0; - if (id->field_valid & 2) { - if (id->capability & 8) - cycle = id->eide_pio_iordy; + if (id[ATA_ID_FIELD_VALID] & 2) { + if (ata_id_has_iordy(drive->id)) + cycle = id[ATA_ID_EIDE_PIO_IORDY]; else - cycle = id->eide_pio; + cycle = id[ATA_ID_EIDE_PIO]; /* conservative "downgrade" for all pre-ATA2 drives */ if (pio < 3 && cycle < t->cycle) @@ -138,7 +137,7 @@ EXPORT_SYMBOL_GPL(ide_timing_merge); int ide_timing_compute(ide_drive_t *drive, u8 speed, struct ide_timing *t, int T, int UT) { - struct hd_driveid *id = drive->id; + u16 *id = drive->id; struct ide_timing *s, p; /* @@ -157,16 +156,15 @@ int ide_timing_compute(ide_drive_t *drive, u8 speed, * If the drive is an EIDE drive, it can tell us it needs extended * PIO/MWDMA cycle timing. */ - if (id && id->field_valid & 2) { /* EIDE drive */ - + if (id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ memset(&p, 0, sizeof(p)); if (speed <= XFER_PIO_2) - p.cycle = p.cyc8b = id->eide_pio; + p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO]; else if (speed <= XFER_PIO_5) - p.cycle = p.cyc8b = id->eide_pio_iordy; + p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO_IORDY]; else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) - p.cycle = id->eide_dma_min; + p.cycle = id[ATA_ID_EIDE_DMA_MIN]; ide_timing_merge(&p, t, t, IDE_TIMING_CYCLE | IDE_TIMING_CYC8B); } diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 772451600e4..04f8f13cb9d 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -44,8 +44,6 @@ * inspiration from lots of linux users, esp. hamish@zot.apana.org.au */ -#define _IDE_C /* Tell ide.h it's really us */ - #include <linux/module.h> #include <linux/types.h> #include <linux/string.h> @@ -58,6 +56,7 @@ #include <linux/init.h> #include <linux/pci.h> #include <linux/ide.h> +#include <linux/hdreg.h> #include <linux/completion.h> #include <linux/device.h> @@ -97,8 +96,6 @@ void ide_init_port_data(ide_hwif_t *hwif, unsigned int index) hwif->name[2] = 'e'; hwif->name[3] = '0' + index; - hwif->bus_state = BUSSTATE_ON; - init_completion(&hwif->gendev_rel_comp); hwif->tp_ops = &default_tp_ops; @@ -117,9 +114,9 @@ static void ide_port_init_devices_data(ide_hwif_t *hwif) memset(drive, 0, sizeof(*drive)); drive->media = ide_disk; - drive->select.all = (unit<<4)|0xa0; + drive->select = (unit << 4) | ATA_DEVICE_OBS; drive->hwif = hwif; - drive->ready_stat = READY_STAT; + drive->ready_stat = ATA_DRDY; drive->bad_wstat = BAD_W_STAT; drive->special.b.recalibrate = 1; drive->special.b.set_geometry = 1; @@ -141,7 +138,7 @@ static void __ide_port_unregister_devices(ide_hwif_t *hwif) for (i = 0; i < MAX_DRIVES; i++) { ide_drive_t *drive = &hwif->drives[i]; - if (drive->present) { + if (drive->dev_flags & IDE_DFLAG_PRESENT) { spin_unlock_irq(&ide_lock); device_unregister(&drive->gendev); wait_for_completion(&drive->gendev_rel_comp); @@ -230,8 +227,7 @@ void ide_unregister(ide_hwif_t *hwif) kfree(hwif->sg_table); unregister_blkdev(hwif->major, hwif->name); - if (hwif->dma_base) - ide_release_dma_engine(hwif); + ide_release_dma_engine(hwif); mutex_unlock(&ide_cfg_mtx); } @@ -253,96 +249,52 @@ void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw) DEFINE_MUTEX(ide_setting_mtx); -EXPORT_SYMBOL_GPL(ide_setting_mtx); - -/** - * ide_spin_wait_hwgroup - wait for group - * @drive: drive in the group - * - * Wait for an IDE device group to go non busy and then return - * holding the ide_lock which guards the hwgroup->busy status - * and right to use it. - */ - -int ide_spin_wait_hwgroup (ide_drive_t *drive) -{ - ide_hwgroup_t *hwgroup = HWGROUP(drive); - unsigned long timeout = jiffies + (3 * HZ); - - spin_lock_irq(&ide_lock); +ide_devset_get(io_32bit, io_32bit); - while (hwgroup->busy) { - unsigned long lflags; - spin_unlock_irq(&ide_lock); - local_irq_set(lflags); - if (time_after(jiffies, timeout)) { - local_irq_restore(lflags); - printk(KERN_ERR "%s: channel busy\n", drive->name); - return -EBUSY; - } - local_irq_restore(lflags); - spin_lock_irq(&ide_lock); - } - return 0; -} - -EXPORT_SYMBOL(ide_spin_wait_hwgroup); - -int set_io_32bit(ide_drive_t *drive, int arg) +static int set_io_32bit(ide_drive_t *drive, int arg) { - if (drive->no_io_32bit) + if (drive->dev_flags & IDE_DFLAG_NO_IO_32BIT) return -EPERM; if (arg < 0 || arg > 1 + (SUPPORT_VLB_SYNC << 1)) return -EINVAL; - if (ide_spin_wait_hwgroup(drive)) - return -EBUSY; - drive->io_32bit = arg; - spin_unlock_irq(&ide_lock); - return 0; } +ide_devset_get_flag(ksettings, IDE_DFLAG_KEEP_SETTINGS); + static int set_ksettings(ide_drive_t *drive, int arg) { if (arg < 0 || arg > 1) return -EINVAL; - if (ide_spin_wait_hwgroup(drive)) - return -EBUSY; - drive->keep_settings = arg; - spin_unlock_irq(&ide_lock); + if (arg) + drive->dev_flags |= IDE_DFLAG_KEEP_SETTINGS; + else + drive->dev_flags &= ~IDE_DFLAG_KEEP_SETTINGS; return 0; } -int set_using_dma(ide_drive_t *drive, int arg) +ide_devset_get_flag(using_dma, IDE_DFLAG_USING_DMA); + +static int set_using_dma(ide_drive_t *drive, int arg) { #ifdef CONFIG_BLK_DEV_IDEDMA - ide_hwif_t *hwif = drive->hwif; int err = -EPERM; if (arg < 0 || arg > 1) return -EINVAL; - if (!drive->id || !(drive->id->capability & 1)) + if (ata_id_has_dma(drive->id) == 0) goto out; - if (hwif->dma_ops == NULL) + if (drive->hwif->dma_ops == NULL) goto out; - err = -EBUSY; - if (ide_spin_wait_hwgroup(drive)) - goto out; - /* - * set ->busy flag, unlock and let it ride - */ - hwif->hwgroup->busy = 1; - spin_unlock_irq(&ide_lock); - err = 0; if (arg) { @@ -351,12 +303,6 @@ int set_using_dma(ide_drive_t *drive, int arg) } else ide_dma_off(drive); - /* - * lock, clear ->busy flag and unlock before leaving - */ - spin_lock_irq(&ide_lock); - hwif->hwgroup->busy = 0; - spin_unlock_irq(&ide_lock); out: return err; #else @@ -367,9 +313,32 @@ out: #endif } -int set_pio_mode(ide_drive_t *drive, int arg) +/* + * handle HDIO_SET_PIO_MODE ioctl abusers here, eventually it will go away + */ +static int set_pio_mode_abuse(ide_hwif_t *hwif, u8 req_pio) +{ + switch (req_pio) { + case 202: + case 201: + case 200: + case 102: + case 101: + case 100: + return (hwif->host_flags & IDE_HFLAG_ABUSE_DMA_MODES) ? 1 : 0; + case 9: + case 8: + return (hwif->host_flags & IDE_HFLAG_ABUSE_PREFETCH) ? 1 : 0; + case 7: + case 6: + return (hwif->host_flags & IDE_HFLAG_ABUSE_FAST_DEVSEL) ? 1 : 0; + default: + return 0; + } +} + +static int set_pio_mode(ide_drive_t *drive, int arg) { - struct request *rq; ide_hwif_t *hwif = drive->hwif; const struct ide_port_ops *port_ops = hwif->port_ops; @@ -380,48 +349,65 @@ int set_pio_mode(ide_drive_t *drive, int arg) (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)) return -ENOSYS; - if (drive->special.b.set_tune) - return -EBUSY; + if (set_pio_mode_abuse(drive->hwif, arg)) { + if (arg == 8 || arg == 9) { + unsigned long flags; - rq = blk_get_request(drive->queue, READ, __GFP_WAIT); - rq->cmd_type = REQ_TYPE_ATA_TASKFILE; + /* take lock for IDE_DFLAG_[NO_]UNMASK/[NO_]IO_32BIT */ + spin_lock_irqsave(&ide_lock, flags); + port_ops->set_pio_mode(drive, arg); + spin_unlock_irqrestore(&ide_lock, flags); + } else + port_ops->set_pio_mode(drive, arg); + } else { + int keep_dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA); - drive->tune_req = (u8) arg; - drive->special.b.set_tune = 1; + ide_set_pio(drive, arg); - blk_execute_rq(drive->queue, NULL, rq, 0); - blk_put_request(rq); + if (hwif->host_flags & IDE_HFLAG_SET_PIO_MODE_KEEP_DMA) { + if (keep_dma) + ide_dma_on(drive); + } + } return 0; } +ide_devset_get_flag(unmaskirq, IDE_DFLAG_UNMASK); + static int set_unmaskirq(ide_drive_t *drive, int arg) { - if (drive->no_unmask) + if (drive->dev_flags & IDE_DFLAG_NO_UNMASK) return -EPERM; if (arg < 0 || arg > 1) return -EINVAL; - if (ide_spin_wait_hwgroup(drive)) - return -EBUSY; - drive->unmask = arg; - spin_unlock_irq(&ide_lock); + if (arg) + drive->dev_flags |= IDE_DFLAG_UNMASK; + else + drive->dev_flags &= ~IDE_DFLAG_UNMASK; return 0; } +ide_ext_devset_rw_sync(io_32bit, io_32bit); +ide_ext_devset_rw_sync(keepsettings, ksettings); +ide_ext_devset_rw_sync(unmaskirq, unmaskirq); +ide_ext_devset_rw_sync(using_dma, using_dma); +__IDE_DEVSET(pio_mode, DS_SYNC, NULL, set_pio_mode); + static int generic_ide_suspend(struct device *dev, pm_message_t mesg) { - ide_drive_t *drive = dev->driver_data; + ide_drive_t *drive = dev->driver_data, *pair = ide_get_pair_dev(drive); ide_hwif_t *hwif = HWIF(drive); struct request *rq; struct request_pm_state rqpm; ide_task_t args; int ret; - /* Call ACPI _GTM only once */ - if (!(drive->dn % 2)) + /* call ACPI _GTM only once */ + if ((drive->dn & 1) == 0 || pair == NULL) ide_acpi_get_timing(hwif); memset(&rqpm, 0, sizeof(rqpm)); @@ -430,33 +416,32 @@ static int generic_ide_suspend(struct device *dev, pm_message_t mesg) rq->cmd_type = REQ_TYPE_PM_SUSPEND; rq->special = &args; rq->data = &rqpm; - rqpm.pm_step = ide_pm_state_start_suspend; + rqpm.pm_step = IDE_PM_START_SUSPEND; if (mesg.event == PM_EVENT_PRETHAW) mesg.event = PM_EVENT_FREEZE; rqpm.pm_state = mesg.event; ret = blk_execute_rq(drive->queue, NULL, rq, 0); blk_put_request(rq); - /* only call ACPI _PS3 after both drivers are suspended */ - if (!ret && (((drive->dn % 2) && hwif->drives[0].present - && hwif->drives[1].present) - || !hwif->drives[0].present - || !hwif->drives[1].present)) + + /* call ACPI _PS3 only after both devices are suspended */ + if (ret == 0 && ((drive->dn & 1) || pair == NULL)) ide_acpi_set_state(hwif, 0); + return ret; } static int generic_ide_resume(struct device *dev) { - ide_drive_t *drive = dev->driver_data; + ide_drive_t *drive = dev->driver_data, *pair = ide_get_pair_dev(drive); ide_hwif_t *hwif = HWIF(drive); struct request *rq; struct request_pm_state rqpm; ide_task_t args; int err; - /* Call ACPI _STM only once */ - if (!(drive->dn % 2)) { + /* call ACPI _PS0 / _STM only once */ + if ((drive->dn & 1) == 0 || pair == NULL) { ide_acpi_set_state(hwif, 1); ide_acpi_push_timing(hwif); } @@ -470,7 +455,7 @@ static int generic_ide_resume(struct device *dev) rq->cmd_flags |= REQ_PREEMPT; rq->special = &args; rq->data = &rqpm; - rqpm.pm_step = ide_pm_state_start_resume; + rqpm.pm_step = IDE_PM_START_RESUME; rqpm.pm_state = PM_EVENT_ON; err = blk_execute_rq(drive->queue, NULL, rq, 1); @@ -486,138 +471,6 @@ static int generic_ide_resume(struct device *dev) return err; } -static int generic_drive_reset(ide_drive_t *drive) -{ - struct request *rq; - int ret = 0; - - rq = blk_get_request(drive->queue, READ, __GFP_WAIT); - rq->cmd_type = REQ_TYPE_SPECIAL; - rq->cmd_len = 1; - rq->cmd[0] = REQ_DRIVE_RESET; - rq->cmd_flags |= REQ_SOFTBARRIER; - if (blk_execute_rq(drive->queue, NULL, rq, 1)) - ret = rq->errors; - blk_put_request(rq); - return ret; -} - -int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device *bdev, - unsigned int cmd, unsigned long arg) -{ - unsigned long flags; - ide_driver_t *drv; - void __user *p = (void __user *)arg; - int err = 0, (*setfunc)(ide_drive_t *, int); - u8 *val; - - switch (cmd) { - case HDIO_GET_32BIT: val = &drive->io_32bit; goto read_val; - case HDIO_GET_KEEPSETTINGS: val = &drive->keep_settings; goto read_val; - case HDIO_GET_UNMASKINTR: val = &drive->unmask; goto read_val; - case HDIO_GET_DMA: val = &drive->using_dma; goto read_val; - case HDIO_SET_32BIT: setfunc = set_io_32bit; goto set_val; - case HDIO_SET_KEEPSETTINGS: setfunc = set_ksettings; goto set_val; - case HDIO_SET_PIO_MODE: setfunc = set_pio_mode; goto set_val; - case HDIO_SET_UNMASKINTR: setfunc = set_unmaskirq; goto set_val; - case HDIO_SET_DMA: setfunc = set_using_dma; goto set_val; - } - - switch (cmd) { - case HDIO_OBSOLETE_IDENTITY: - case HDIO_GET_IDENTITY: - if (bdev != bdev->bd_contains) - return -EINVAL; - if (drive->id_read == 0) - return -ENOMSG; - if (copy_to_user(p, drive->id, (cmd == HDIO_GET_IDENTITY) ? sizeof(*drive->id) : 142)) - return -EFAULT; - return 0; - - case HDIO_GET_NICE: - return put_user(drive->dsc_overlap << IDE_NICE_DSC_OVERLAP | - drive->atapi_overlap << IDE_NICE_ATAPI_OVERLAP | - drive->nice1 << IDE_NICE_1, - (long __user *) arg); -#ifdef CONFIG_IDE_TASK_IOCTL - case HDIO_DRIVE_TASKFILE: - if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) - return -EACCES; - switch(drive->media) { - case ide_disk: - return ide_taskfile_ioctl(drive, cmd, arg); - default: - return -ENOMSG; - } -#endif /* CONFIG_IDE_TASK_IOCTL */ - - case HDIO_DRIVE_CMD: - if (!capable(CAP_SYS_RAWIO)) - return -EACCES; - return ide_cmd_ioctl(drive, cmd, arg); - - case HDIO_DRIVE_TASK: - if (!capable(CAP_SYS_RAWIO)) - return -EACCES; - return ide_task_ioctl(drive, cmd, arg); - case HDIO_SET_NICE: - if (!capable(CAP_SYS_ADMIN)) return -EACCES; - if (arg != (arg & ((1 << IDE_NICE_DSC_OVERLAP) | (1 << IDE_NICE_1)))) - return -EPERM; - drive->dsc_overlap = (arg >> IDE_NICE_DSC_OVERLAP) & 1; - drv = *(ide_driver_t **)bdev->bd_disk->private_data; - if (drive->dsc_overlap && !drv->supports_dsc_overlap) { - drive->dsc_overlap = 0; - return -EPERM; - } - drive->nice1 = (arg >> IDE_NICE_1) & 1; - return 0; - case HDIO_DRIVE_RESET: - if (!capable(CAP_SYS_ADMIN)) - return -EACCES; - - return generic_drive_reset(drive); - - case HDIO_GET_BUSSTATE: - if (!capable(CAP_SYS_ADMIN)) - return -EACCES; - if (put_user(HWIF(drive)->bus_state, (long __user *)arg)) - return -EFAULT; - return 0; - - case HDIO_SET_BUSSTATE: - if (!capable(CAP_SYS_ADMIN)) - return -EACCES; - return -EOPNOTSUPP; - default: - return -EINVAL; - } - -read_val: - mutex_lock(&ide_setting_mtx); - spin_lock_irqsave(&ide_lock, flags); - err = *val; - spin_unlock_irqrestore(&ide_lock, flags); - mutex_unlock(&ide_setting_mtx); - return err >= 0 ? put_user(err, (long __user *)arg) : err; - -set_val: - if (bdev != bdev->bd_contains) - err = -EINVAL; - else { - if (!capable(CAP_SYS_ADMIN)) - err = -EACCES; - else { - mutex_lock(&ide_setting_mtx); - err = setfunc(drive, arg); - mutex_unlock(&ide_setting_mtx); - } - } - return err; -} - -EXPORT_SYMBOL(generic_ide_ioctl); - /** * ide_device_get - get an additional reference to a ide_drive_t * @drive: device to get a reference to @@ -710,21 +563,21 @@ static ssize_t model_show(struct device *dev, struct device_attribute *attr, char *buf) { ide_drive_t *drive = to_ide_device(dev); - return sprintf(buf, "%s\n", drive->id->model); + return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_PROD]); } static ssize_t firmware_show(struct device *dev, struct device_attribute *attr, char *buf) { ide_drive_t *drive = to_ide_device(dev); - return sprintf(buf, "%s\n", drive->id->fw_rev); + return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_FW_REV]); } static ssize_t serial_show(struct device *dev, struct device_attribute *attr, char *buf) { ide_drive_t *drive = to_ide_device(dev); - return sprintf(buf, "%s\n", drive->id->serial_no); + return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_SERNO]); } static struct device_attribute ide_dev_attrs[] = { @@ -734,6 +587,7 @@ static struct device_attribute ide_dev_attrs[] = { __ATTR_RO(model), __ATTR_RO(firmware), __ATTR(serial, 0400, serial_show, NULL), + __ATTR(unload_heads, 0644, ide_park_show, ide_park_store), __ATTR_NULL }; @@ -841,7 +695,7 @@ MODULE_PARM_DESC(noprobe, "skip probing for a device"); static unsigned int ide_nowerr; module_param_call(nowerr, ide_set_dev_param_mask, NULL, &ide_nowerr, 0); -MODULE_PARM_DESC(nowerr, "ignore the WRERR_STAT bit for a device"); +MODULE_PARM_DESC(nowerr, "ignore the ATA_DF bit for a device"); static unsigned int ide_cdroms; @@ -888,31 +742,31 @@ static int ide_set_disk_chs(const char *str, struct kernel_param *kp) module_param_call(chs, ide_set_disk_chs, NULL, NULL, 0); MODULE_PARM_DESC(chs, "force device as a disk (using CHS)"); -static void ide_dev_apply_params(ide_drive_t *drive) +static void ide_dev_apply_params(ide_drive_t *drive, u8 unit) { - int i = drive->hwif->index * MAX_DRIVES + drive->select.b.unit; + int i = drive->hwif->index * MAX_DRIVES + unit; if (ide_nodma & (1 << i)) { printk(KERN_INFO "ide: disallowing DMA for %s\n", drive->name); - drive->nodma = 1; + drive->dev_flags |= IDE_DFLAG_NODMA; } if (ide_noflush & (1 << i)) { printk(KERN_INFO "ide: disabling flush requests for %s\n", drive->name); - drive->noflush = 1; + drive->dev_flags |= IDE_DFLAG_NOFLUSH; } if (ide_noprobe & (1 << i)) { printk(KERN_INFO "ide: skipping probe for %s\n", drive->name); - drive->noprobe = 1; + drive->dev_flags |= IDE_DFLAG_NOPROBE; } if (ide_nowerr & (1 << i)) { - printk(KERN_INFO "ide: ignoring the WRERR_STAT bit for %s\n", + printk(KERN_INFO "ide: ignoring the ATA_DF bit for %s\n", drive->name); drive->bad_wstat = BAD_R_STAT; } if (ide_cdroms & (1 << i)) { printk(KERN_INFO "ide: forcing %s as a CD-ROM\n", drive->name); - drive->present = 1; + drive->dev_flags |= IDE_DFLAG_PRESENT; drive->media = ide_cdrom; /* an ATAPI device ignores DRDY */ drive->ready_stat = 0; @@ -921,13 +775,14 @@ static void ide_dev_apply_params(ide_drive_t *drive) drive->cyl = drive->bios_cyl = ide_disks_chs[i].cyl; drive->head = drive->bios_head = ide_disks_chs[i].head; drive->sect = drive->bios_sect = ide_disks_chs[i].sect; - drive->forced_geom = 1; + printk(KERN_INFO "ide: forcing %s as a disk (%d/%d/%d)\n", drive->name, drive->cyl, drive->head, drive->sect); - drive->present = 1; + + drive->dev_flags |= IDE_DFLAG_FORCED_GEOM | IDE_DFLAG_PRESENT; drive->media = ide_disk; - drive->ready_stat = READY_STAT; + drive->ready_stat = ATA_DRDY; } } @@ -965,7 +820,7 @@ void ide_port_apply_params(ide_hwif_t *hwif) } for (i = 0; i < MAX_DRIVES; i++) - ide_dev_apply_params(&hwif->drives[i]); + ide_dev_apply_params(&hwif->drives[i], i); } /* diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c index 4ec19737f3c..90da1f953ed 100644 --- a/drivers/ide/legacy/ali14xx.c +++ b/drivers/ide/legacy/ali14xx.c @@ -43,7 +43,6 @@ #include <linux/mm.h> #include <linux/ioport.h> #include <linux/blkdev.h> -#include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> @@ -132,7 +131,7 @@ static void ali14xx_set_pio_mode(ide_drive_t *drive, const u8 pio) drive->name, pio, time1, time2, param1, param2, param3, param4); /* stuff timing parameters into controller registers */ - driveNum = (HWIF(drive)->index << 1) + drive->select.b.unit; + driveNum = (drive->hwif->index << 1) + (drive->dn & 1); spin_lock_irqsave(&ali14xx_lock, flags); outb_p(regOn, basePort); outReg(param1, regTab[driveNum].reg1); diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c index 7c2afa97f41..c5a3c9ef6a5 100644 --- a/drivers/ide/legacy/buddha.c +++ b/drivers/ide/legacy/buddha.c @@ -20,7 +20,6 @@ #include <linux/mm.h> #include <linux/interrupt.h> #include <linux/blkdev.h> -#include <linux/hdreg.h> #include <linux/zorro.h> #include <linux/ide.h> #include <linux/init.h> diff --git a/drivers/ide/legacy/dtc2278.c b/drivers/ide/legacy/dtc2278.c index af791a02a12..689b2e49341 100644 --- a/drivers/ide/legacy/dtc2278.c +++ b/drivers/ide/legacy/dtc2278.c @@ -10,7 +10,6 @@ #include <linux/mm.h> #include <linux/ioport.h> #include <linux/blkdev.h> -#include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c index 724f95073d8..39d500d84b0 100644 --- a/drivers/ide/legacy/falconide.c +++ b/drivers/ide/legacy/falconide.c @@ -13,7 +13,6 @@ #include <linux/mm.h> #include <linux/interrupt.h> #include <linux/blkdev.h> -#include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c index 51ba085d7aa..69150688656 100644 --- a/drivers/ide/legacy/gayle.c +++ b/drivers/ide/legacy/gayle.c @@ -12,7 +12,6 @@ #include <linux/mm.h> #include <linux/interrupt.h> #include <linux/blkdev.h> -#include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> #include <linux/zorro.h> diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c index 98f7c95e39e..c7e5c2246b7 100644 --- a/drivers/ide/legacy/ht6560b.c +++ b/drivers/ide/legacy/ht6560b.c @@ -24,7 +24,6 @@ #include <linux/mm.h> #include <linux/ioport.h> #include <linux/blkdev.h> -#include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> @@ -121,7 +120,8 @@ static void ht6560b_selectproc (ide_drive_t *drive) * Need to enforce prefetch sometimes because otherwise * it'll hang (hard). */ - if (drive->media != ide_disk || !drive->present) + if (drive->media != ide_disk || + (drive->dev_flags & IDE_DFLAG_PRESENT) == 0) select |= HT_PREFETCH_MODE; if (select != current_select || timing != current_timing) { @@ -250,11 +250,11 @@ static void ht_set_prefetch(ide_drive_t *drive, u8 state) */ if (state) { drive->drive_data |= t; /* enable prefetch mode */ - drive->no_unmask = 1; - drive->unmask = 0; + drive->dev_flags |= IDE_DFLAG_NO_UNMASK; + drive->dev_flags &= ~IDE_DFLAG_UNMASK; } else { drive->drive_data &= ~t; /* disable prefetch mode */ - drive->no_unmask = 0; + drive->dev_flags &= ~IDE_DFLAG_NO_UNMASK; } spin_unlock_irqrestore(&ht6560b_lock, flags); diff --git a/drivers/ide/legacy/ide-4drives.c b/drivers/ide/legacy/ide-4drives.c index c76d55de699..9e85b1ec960 100644 --- a/drivers/ide/legacy/ide-4drives.c +++ b/drivers/ide/legacy/ide-4drives.c @@ -14,7 +14,7 @@ MODULE_PARM_DESC(probe, "probe for generic IDE chipset with 4 drives/port"); static void ide_4drives_init_dev(ide_drive_t *drive) { if (drive->hwif->channel) - drive->select.all ^= 0x20; + drive->select ^= 0x20; } static const struct ide_port_ops ide_4drives_port_ops = { diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index 21bfac13784..cb199c815b5 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -38,7 +38,6 @@ #include <linux/timer.h> #include <linux/ioport.h> #include <linux/ide.h> -#include <linux/hdreg.h> #include <linux/major.h> #include <linux/delay.h> #include <asm/io.h> @@ -220,103 +219,91 @@ out_release: #define CS_CHECK(fn, ret) \ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) +struct pcmcia_config_check { + unsigned long ctl_base; + int skip_vcc; + int is_kme; +}; + +static int pcmcia_check_one_config(struct pcmcia_device *pdev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + struct pcmcia_config_check *stk = priv_data; + + /* Check for matching Vcc, unless we're desperate */ + if (!stk->skip_vcc) { + if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) + return -ENODEV; + } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) + return -ENODEV; + } + } + + if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) + pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; + else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) + pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; + + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + pdev->conf.ConfigIndex = cfg->index; + pdev->io.BasePort1 = io->win[0].base; + pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + if (!(io->flags & CISTPL_IO_16BIT)) + pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + if (io->nwin == 2) { + pdev->io.NumPorts1 = 8; + pdev->io.BasePort2 = io->win[1].base; + pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1; + if (pcmcia_request_io(pdev, &pdev->io) != 0) + return -ENODEV; + stk->ctl_base = pdev->io.BasePort2; + } else if ((io->nwin == 1) && (io->win[0].len >= 16)) { + pdev->io.NumPorts1 = io->win[0].len; + pdev->io.NumPorts2 = 0; + if (pcmcia_request_io(pdev, &pdev->io) != 0) + return -ENODEV; + stk->ctl_base = pdev->io.BasePort1 + 0x0e; + } else + return -ENODEV; + /* If we've got this far, we're done */ + return 0; + } + return -ENODEV; +} + static int ide_config(struct pcmcia_device *link) { ide_info_t *info = link->priv; - tuple_t tuple; - struct { - u_short buf[128]; - cisparse_t parse; - config_info_t conf; - cistpl_cftable_entry_t dflt; - } *stk = NULL; - cistpl_cftable_entry_t *cfg; - int pass, last_ret = 0, last_fn = 0, is_kme = 0; + struct pcmcia_config_check *stk = NULL; + int last_ret = 0, last_fn = 0, is_kme = 0; unsigned long io_base, ctl_base; struct ide_host *host; DEBUG(0, "ide_config(0x%p)\n", link); - stk = kzalloc(sizeof(*stk), GFP_KERNEL); - if (!stk) goto err_mem; - cfg = &stk->parse.cftable_entry; - - tuple.TupleData = (cisdata_t *)&stk->buf; - tuple.TupleOffset = 0; - tuple.TupleDataMax = 255; - tuple.Attributes = 0; - is_kme = ((link->manf_id == MANFID_KME) && ((link->card_id == PRODID_KME_KXLC005_A) || (link->card_id == PRODID_KME_KXLC005_B))); - /* Not sure if this is right... look up the current Vcc */ - CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &stk->conf)); - - pass = io_base = ctl_base = 0; - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - tuple.Attributes = 0; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (1) { - if (pcmcia_get_tuple_data(link, &tuple) != 0) goto next_entry; - if (pcmcia_parse_tuple(link, &tuple, &stk->parse) != 0) goto next_entry; - - /* Check for matching Vcc, unless we're desperate */ - if (!pass) { - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (stk->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) - goto next_entry; - } else if (stk->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (stk->conf.Vcc != stk->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) - goto next_entry; - } - } - - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - link->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (stk->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) - link->conf.Vpp = - stk->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000; - - if ((cfg->io.nwin > 0) || (stk->dflt.io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &stk->dflt.io; - link->conf.ConfigIndex = cfg->index; - link->io.BasePort1 = io->win[0].base; - link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - if (!(io->flags & CISTPL_IO_16BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - if (io->nwin == 2) { - link->io.NumPorts1 = 8; - link->io.BasePort2 = io->win[1].base; - link->io.NumPorts2 = (is_kme) ? 2 : 1; - if (pcmcia_request_io(link, &link->io) != 0) - goto next_entry; - io_base = link->io.BasePort1; - ctl_base = link->io.BasePort2; - } else if ((io->nwin == 1) && (io->win[0].len >= 16)) { - link->io.NumPorts1 = io->win[0].len; - link->io.NumPorts2 = 0; - if (pcmcia_request_io(link, &link->io) != 0) - goto next_entry; - io_base = link->io.BasePort1; - ctl_base = link->io.BasePort1 + 0x0e; - } else goto next_entry; - /* If we've got this far, we're done */ - break; - } - - next_entry: - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) - memcpy(&stk->dflt, cfg, sizeof(stk->dflt)); - if (pass) { - CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple)); - } else if (pcmcia_get_next_tuple(link, &tuple) != 0) { - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - memset(&stk->dflt, 0, sizeof(stk->dflt)); - pass++; - } + stk = kzalloc(sizeof(*stk), GFP_KERNEL); + if (!stk) + goto err_mem; + stk->is_kme = is_kme; + stk->skip_vcc = io_base = ctl_base = 0; + + if (pcmcia_loop_config(link, pcmcia_check_one_config, stk)) { + stk->skip_vcc = 1; + if (pcmcia_loop_config(link, pcmcia_check_one_config, stk)) + goto failed; /* No suitable config found */ } + io_base = link->io.BasePort1; + ctl_base = stk->ctl_base; CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); @@ -404,8 +391,10 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000), /* I-O Data CFA */ PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */ PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704), + PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904), PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */ PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */ + PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620), /* TI emulated */ PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */ PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d), PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */ diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c index a0bb167980e..43f97cc1d30 100644 --- a/drivers/ide/legacy/macide.c +++ b/drivers/ide/legacy/macide.c @@ -15,7 +15,6 @@ #include <linux/mm.h> #include <linux/interrupt.h> #include <linux/blkdev.h> -#include <linux/hdreg.h> #include <linux/delay.h> #include <linux/ide.h> diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c index 4abd8fc7819..4af4a8ce4cd 100644 --- a/drivers/ide/legacy/q40ide.c +++ b/drivers/ide/legacy/q40ide.c @@ -14,8 +14,6 @@ #include <linux/mm.h> #include <linux/interrupt.h> #include <linux/blkdev.h> -#include <linux/hdreg.h> - #include <linux/ide.h> /* diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c index 2338f344ea2..bc27c7aba93 100644 --- a/drivers/ide/legacy/qd65xx.c +++ b/drivers/ide/legacy/qd65xx.c @@ -27,7 +27,6 @@ #include <linux/mm.h> #include <linux/ioport.h> #include <linux/blkdev.h> -#include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> #include <asm/system.h> @@ -151,12 +150,14 @@ static int qd_find_disk_type (ide_drive_t *drive, int *active_time, int *recovery_time) { struct qd65xx_timing_s *p; - char model[40]; + char *m = (char *)&drive->id[ATA_ID_PROD]; + char model[ATA_ID_PROD_LEN]; - if (!*drive->id->model) return 0; + if (*m == 0) + return 0; - strncpy(model,drive->id->model,40); - ide_fixstring(model,40,1); /* byte-swap */ + strncpy(model, m, ATA_ID_PROD_LEN); + ide_fixstring(model, ATA_ID_PROD_LEN, 1); /* byte-swap */ for (p = qd65xx_timing ; p->offset != -1 ; p++) { if (!strncmp(p->model, model+p->offset, 4)) { @@ -185,20 +186,20 @@ static void qd_set_timing (ide_drive_t *drive, u8 timing) static void qd6500_set_pio_mode(ide_drive_t *drive, const u8 pio) { + u16 *id = drive->id; int active_time = 175; int recovery_time = 415; /* worst case values from the dos driver */ /* * FIXME: use "pio" value */ - if (drive->id && !qd_find_disk_type(drive, &active_time, &recovery_time) - && drive->id->tPIO && (drive->id->field_valid & 0x02) - && drive->id->eide_pio >= 240) { - + if (!qd_find_disk_type(drive, &active_time, &recovery_time) && + (id[ATA_ID_OLD_PIO_MODES] & 0xff) && (id[ATA_ID_FIELD_VALID] & 2) && + id[ATA_ID_EIDE_PIO] >= 240) { printk(KERN_INFO "%s: PIO mode%d\n", drive->name, - drive->id->tPIO); + id[ATA_ID_OLD_PIO_MODES] & 0xff); active_time = 110; - recovery_time = drive->id->eide_pio - 120; + recovery_time = drive->id[ATA_ID_EIDE_PIO] - 120; } qd_set_timing(drive, qd6500_compute_timing(HWIF(drive), active_time, recovery_time)); @@ -304,7 +305,7 @@ static void __init qd6580_init_dev(ide_drive_t *drive) } else t2 = t1 = hwif->channel ? QD6580_DEF_DATA2 : QD6580_DEF_DATA; - drive->drive_data = drive->select.b.unit ? t2 : t1; + drive->drive_data = (drive->dn & 1) ? t2 : t1; } static const struct ide_port_ops qd6500_port_ops = { diff --git a/drivers/ide/legacy/umc8672.c b/drivers/ide/legacy/umc8672.c index b54a14a5775..1da076e0c91 100644 --- a/drivers/ide/legacy/umc8672.c +++ b/drivers/ide/legacy/umc8672.c @@ -45,7 +45,6 @@ #include <linux/mm.h> #include <linux/ioport.h> #include <linux/blkdev.h> -#include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> diff --git a/drivers/ide/mips/Makefile b/drivers/ide/mips/Makefile index 677c7b2bac9..5873fa0b876 100644 --- a/drivers/ide/mips/Makefile +++ b/drivers/ide/mips/Makefile @@ -1,4 +1,3 @@ -obj-$(CONFIG_BLK_DEV_IDE_SWARM) += swarm.o obj-$(CONFIG_BLK_DEV_IDE_AU1XXX) += au1xxx-ide.o EXTRA_CFLAGS := -Idrivers/ide diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c index 11b7f61aae4..0ec8fd1e4dc 100644 --- a/drivers/ide/mips/au1xxx-ide.c +++ b/drivers/ide/mips/au1xxx-ide.c @@ -322,11 +322,7 @@ static int auide_dma_setup(ide_drive_t *drive) } static int auide_dma_test_irq(ide_drive_t *drive) -{ - if (drive->waiting_for_dma == 0) - printk(KERN_WARNING "%s: ide_dma_test_irq \ - called while not waiting\n", drive->name); - +{ /* If dbdma didn't execute the STOP command yet, the * active bit is still set */ @@ -344,11 +340,6 @@ static void auide_dma_host_set(ide_drive_t *drive, int on) { } -static void auide_dma_lost_irq(ide_drive_t *drive) -{ - printk(KERN_ERR "%s: IRQ lost\n", drive->name); -} - static void auide_ddma_tx_callback(int irq, void *param) { _auide_hwif *ahwif = (_auide_hwif*)param; @@ -375,18 +366,6 @@ static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 de } #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA -static void auide_dma_timeout(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - - printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name); - - if (auide_dma_test_irq(drive)) - return; - - auide_dma_end(drive); -} - static const struct ide_dma_ops au1xxx_dma_ops = { .dma_host_set = auide_dma_host_set, .dma_setup = auide_dma_setup, @@ -394,8 +373,8 @@ static const struct ide_dma_ops au1xxx_dma_ops = { .dma_start = auide_dma_start, .dma_end = auide_dma_end, .dma_test_irq = auide_dma_test_irq, - .dma_lost_irq = auide_dma_lost_irq, - .dma_timeout = auide_dma_timeout, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timeout = ide_dma_timeout, }; static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) @@ -448,10 +427,9 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) NUM_DESCRIPTORS); auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan, NUM_DESCRIPTORS); - - hwif->dmatable_cpu = dma_alloc_coherent(hwif->dev, - PRD_ENTRIES * PRD_BYTES, /* 1 Page */ - &hwif->dmatable_dma, GFP_KERNEL); + + /* FIXME: check return value */ + (void)ide_allocate_dma_engine(hwif); au1xxx_dbdma_start( auide->tx_chan ); au1xxx_dbdma_start( auide->rx_chan ); diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c deleted file mode 100644 index badf79fc9e3..00000000000 --- a/drivers/ide/mips/swarm.c +++ /dev/null @@ -1,196 +0,0 @@ -/* - * Copyright (C) 2001, 2002, 2003 Broadcom Corporation - * Copyright (C) 2004 MontaVista Software Inc. - * Author: Manish Lachwani, mlachwani@mvista.com - * Copyright (C) 2004 MIPS Technologies, Inc. All rights reserved. - * Author: Maciej W. Rozycki <macro@mips.com> - * Copyright (c) 2006, 2008 Maciej W. Rozycki - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - * Derived loosely from ide-pmac.c, so: - * Copyright (C) 1998 Paul Mackerras. - * Copyright (C) 1995-1998 Mark Lord - */ - -/* - * Boards with SiByte processors so far have supported IDE devices via - * the Generic Bus, PCI bus, and built-in PCMCIA interface. In all - * cases, byte-swapping must be avoided for these devices (whereas - * other PCI devices, for example, will require swapping). Any - * SiByte-targetted kernel including IDE support will include this - * file. Probing of a Generic Bus for an IDE device is controlled by - * the definition of "SIBYTE_HAVE_IDE", which is provided by - * <asm/sibyte/board.h> for Broadcom boards. - */ - -#include <linux/ide.h> -#include <linux/ioport.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/platform_device.h> - -#include <asm/io.h> - -#include <asm/sibyte/board.h> -#include <asm/sibyte/sb1250_genbus.h> -#include <asm/sibyte/sb1250_regs.h> - -#define DRV_NAME "ide-swarm" - -static char swarm_ide_string[] = DRV_NAME; - -static struct resource swarm_ide_resource = { - .name = "SWARM GenBus IDE", - .flags = IORESOURCE_MEM, -}; - -static struct platform_device *swarm_ide_dev; - -static const struct ide_port_info swarm_port_info = { - .name = DRV_NAME, - .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA, -}; - -/* - * swarm_ide_probe - if the board header indicates the existence of - * Generic Bus IDE, allocate a HWIF for it. - */ -static int __devinit swarm_ide_probe(struct device *dev) -{ - u8 __iomem *base; - struct ide_host *host; - phys_t offset, size; - int i, rc; - hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; - - if (!SIBYTE_HAVE_IDE) - return -ENODEV; - - base = ioremap(A_IO_EXT_BASE, 0x800); - offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS)); - size = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_MULT_SIZE, IDE_CS)); - iounmap(base); - - offset = G_IO_START_ADDR(offset) << S_IO_ADDRBASE; - size = (G_IO_MULT_SIZE(size) + 1) << S_IO_REGSIZE; - if (offset < A_PHYS_GENBUS || offset >= A_PHYS_GENBUS_END) { - printk(KERN_INFO DRV_NAME - ": IDE interface at GenBus disabled\n"); - return -EBUSY; - } - - printk(KERN_INFO DRV_NAME ": IDE interface at GenBus slot %i\n", - IDE_CS); - - swarm_ide_resource.start = offset; - swarm_ide_resource.end = offset + size - 1; - if (request_resource(&iomem_resource, &swarm_ide_resource)) { - printk(KERN_ERR DRV_NAME - ": can't request I/O memory resource\n"); - return -EBUSY; - } - - base = ioremap(offset, size); - - for (i = 0; i <= 7; i++) - hw.io_ports_array[i] = - (unsigned long)(base + ((0x1f0 + i) << 5)); - hw.io_ports.ctl_addr = - (unsigned long)(base + (0x3f6 << 5)); - hw.irq = K_INT_GB_IDE; - hw.chipset = ide_generic; - - rc = ide_host_add(&swarm_port_info, hws, &host); - if (rc) - goto err; - - dev_set_drvdata(dev, host); - - return 0; -err: - release_resource(&swarm_ide_resource); - iounmap(base); - return rc; -} - -static struct device_driver swarm_ide_driver = { - .name = swarm_ide_string, - .bus = &platform_bus_type, - .probe = swarm_ide_probe, -}; - -static void swarm_ide_platform_release(struct device *device) -{ - struct platform_device *pldev; - - /* free device */ - pldev = to_platform_device(device); - kfree(pldev); -} - -static int __devinit swarm_ide_init_module(void) -{ - struct platform_device *pldev; - int err; - - printk(KERN_INFO "SWARM IDE driver\n"); - - if (driver_register(&swarm_ide_driver)) { - printk(KERN_ERR "Driver registration failed\n"); - err = -ENODEV; - goto out; - } - - if (!(pldev = kzalloc(sizeof (*pldev), GFP_KERNEL))) { - err = -ENOMEM; - goto out_unregister_driver; - } - - pldev->name = swarm_ide_string; - pldev->id = 0; - pldev->dev.release = swarm_ide_platform_release; - - if (platform_device_register(pldev)) { - err = -ENODEV; - goto out_free_pldev; - } - - if (!pldev->dev.driver) { - /* - * The driver was not bound to this device, there was - * no hardware at this address. Unregister it, as the - * release fuction will take care of freeing the - * allocated structure - */ - platform_device_unregister (pldev); - } - - swarm_ide_dev = pldev; - - return 0; - -out_free_pldev: - kfree(pldev); - -out_unregister_driver: - driver_unregister(&swarm_ide_driver); -out: - return err; -} - -module_init(swarm_ide_init_module); diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c index 3187215e8f8..4142c698e0d 100644 --- a/drivers/ide/pci/aec62xx.c +++ b/drivers/ide/pci/aec62xx.c @@ -7,7 +7,6 @@ #include <linux/module.h> #include <linux/types.h> #include <linux/pci.h> -#include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> @@ -116,7 +115,7 @@ static void aec6260_set_mode(ide_drive_t *drive, const u8 speed) struct pci_dev *dev = to_pci_dev(hwif->dev); struct ide_host *host = pci_get_drvdata(dev); struct chipset_bus_clock_list_entry *bus_clock = host->host_priv; - u8 unit = (drive->select.b.unit & 0x01); + u8 unit = drive->dn & 1; u8 tmp1 = 0, tmp2 = 0; u8 ultra = 0, drive_conf = 0, ultra_conf = 0; unsigned long flags; @@ -140,7 +139,7 @@ static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio) drive->hwif->port_ops->set_dma_mode(drive, pio + XFER_PIO_0); } -static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev) +static unsigned int init_chipset_aec62xx(struct pci_dev *dev) { /* These are necessary to get AEC6280 Macintosh cards to work */ if ((dev->device == PCI_DEVICE_ID_ARTOP_ATP865) || @@ -303,21 +302,23 @@ static const struct pci_device_id aec62xx_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, aec62xx_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver aec62xx_pci_driver = { .name = "AEC62xx_IDE", .id_table = aec62xx_pci_tbl, .probe = aec62xx_init_one, .remove = __devexit_p(aec62xx_remove), + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, }; static int __init aec62xx_ide_init(void) { - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&aec62xx_pci_driver); } static void __exit aec62xx_ide_exit(void) { - pci_unregister_driver(&driver); + pci_unregister_driver(&aec62xx_pci_driver); } module_init(aec62xx_ide_init); diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index d647526af55..daf9dce39e5 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c @@ -31,7 +31,6 @@ #include <linux/types.h> #include <linux/kernel.h> #include <linux/pci.h> -#include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> #include <linux/dmi.h> @@ -78,8 +77,7 @@ static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio) int bus_speed = ide_pci_clk ? ide_pci_clk : 33; int port = hwif->channel ? 0x5c : 0x58; int portFIFO = hwif->channel ? 0x55 : 0x54; - u8 cd_dma_fifo = 0; - int unit = drive->select.b.unit & 1; + u8 cd_dma_fifo = 0, unit = drive->dn & 1; if ((s_clc = (s_time * bus_speed + 999) / 1000) >= 8) s_clc = 0; @@ -113,7 +111,7 @@ static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio) } pci_write_config_byte(dev, port, s_clc); - pci_write_config_byte(dev, port+drive->select.b.unit+2, (a_clc << 4) | r_clc); + pci_write_config_byte(dev, port + unit + 2, (a_clc << 4) | r_clc); local_irq_restore(flags); } @@ -134,8 +132,8 @@ static u8 ali_udma_filter(ide_drive_t *drive) if (m5229_revision > 0x20 && m5229_revision < 0xC2) { if (drive->media != ide_disk) return 0; - if (chip_is_1543c_e && strstr(drive->id->model, "WDC ") && - wdc_udma == 0) + if (wdc_udma == 0 && chip_is_1543c_e && + strstr((char *)&drive->id[ATA_ID_PROD], "WDC ")) return 0; } @@ -155,7 +153,7 @@ static void ali_set_dma_mode(ide_drive_t *drive, const u8 speed) ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); u8 speed1 = speed; - u8 unit = (drive->select.b.unit & 0x01); + u8 unit = drive->dn & 1; u8 tmpbyte = 0x00; int m5229_udma = (hwif->channel) ? 0x57 : 0x56; @@ -214,7 +212,7 @@ static int ali15x3_dma_setup(ide_drive_t *drive) * appropriate also sets up the 1533 southbridge. */ -static unsigned int __devinit init_chipset_ali15x3(struct pci_dev *dev) +static unsigned int init_chipset_ali15x3(struct pci_dev *dev) { unsigned long flags; u8 tmpbyte; @@ -509,7 +507,7 @@ static const struct ide_dma_ops ali_dma_ops = { .dma_setup = ali15x3_dma_setup, .dma_exec_cmd = ide_dma_exec_cmd, .dma_start = ide_dma_start, - .dma_end = __ide_dma_end, + .dma_end = ide_dma_end, .dma_test_irq = ide_dma_test_irq, .dma_lost_irq = ide_dma_lost_irq, .dma_timeout = ide_dma_timeout, @@ -577,21 +575,23 @@ static const struct pci_device_id alim15x3_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, alim15x3_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver alim15x3_pci_driver = { .name = "ALI15x3_IDE", .id_table = alim15x3_pci_tbl, .probe = alim15x3_init_one, .remove = ide_pci_remove, + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, }; static int __init ali15x3_ide_init(void) { - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&alim15x3_pci_driver); } static void __exit ali15x3_ide_exit(void) { - return pci_unregister_driver(&driver); + return pci_unregister_driver(&alim15x3_pci_driver); } module_init(ali15x3_ide_init); diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index 1e66a960a96..81ec73134ed 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -92,7 +92,7 @@ static void amd_set_drive(ide_drive_t *drive, const u8 speed) ide_timing_compute(drive, speed, &t, T, UT); - if (peer->present) { + if (peer->dev_flags & IDE_DFLAG_PRESENT) { ide_timing_compute(peer, peer->current_speed, &p, T, UT); ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT); } @@ -112,13 +112,13 @@ static void amd_set_pio_mode(ide_drive_t *drive, const u8 pio) amd_set_drive(drive, XFER_PIO_0 + pio); } -static void __devinit amd7409_cable_detect(struct pci_dev *dev) +static void amd7409_cable_detect(struct pci_dev *dev) { /* no host side cable detection */ amd_80w = 0x03; } -static void __devinit amd7411_cable_detect(struct pci_dev *dev) +static void amd7411_cable_detect(struct pci_dev *dev) { int i; u32 u = 0; @@ -140,7 +140,7 @@ static void __devinit amd7411_cable_detect(struct pci_dev *dev) * The initialization callback. Initialize drive independent registers. */ -static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev) +static unsigned int init_chipset_amd74xx(struct pci_dev *dev) { u8 t = 0, offset = amd_offset(dev); @@ -319,21 +319,23 @@ static const struct pci_device_id amd74xx_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver amd74xx_pci_driver = { .name = "AMD_IDE", .id_table = amd74xx_pci_tbl, .probe = amd74xx_probe, .remove = ide_pci_remove, + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, }; static int __init amd74xx_ide_init(void) { - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&amd74xx_pci_driver); } static void __exit amd74xx_ide_exit(void) { - pci_unregister_driver(&driver); + pci_unregister_driver(&amd74xx_pci_driver); } module_init(amd74xx_ide_init); diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c index 41f6cb6c163..b2735d28f5c 100644 --- a/drivers/ide/pci/atiixp.c +++ b/drivers/ide/pci/atiixp.c @@ -7,7 +7,6 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/pci.h> -#include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> @@ -183,21 +182,23 @@ static const struct pci_device_id atiixp_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver atiixp_pci_driver = { .name = "ATIIXP_IDE", .id_table = atiixp_pci_tbl, .probe = atiixp_init_one, .remove = ide_pci_remove, + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, }; static int __init atiixp_ide_init(void) { - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&atiixp_pci_driver); } static void __exit atiixp_ide_exit(void) { - pci_unregister_driver(&driver); + pci_unregister_driver(&atiixp_pci_driver); } module_init(atiixp_ide_init); diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c index e6c62006ca1..e4306647d00 100644 --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/pci/cmd640.c @@ -103,7 +103,6 @@ #include <linux/types.h> #include <linux/kernel.h> #include <linux/delay.h> -#include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> @@ -375,6 +374,21 @@ static void cmd640_dump_regs(void) } #endif +static void __set_prefetch_mode(ide_drive_t *drive, int mode) +{ + if (mode) { /* want prefetch on? */ +#if CMD640_PREFETCH_MASKS + drive->dev_flags |= IDE_DFLAG_NO_UNMASK; + drive->dev_flags &= ~IDE_DFLAG_UNMASK; +#endif + drive->dev_flags &= ~IDE_DFLAG_NO_IO_32BIT; + } else { + drive->dev_flags &= ~IDE_DFLAG_NO_UNMASK; + drive->dev_flags |= IDE_DFLAG_NO_IO_32BIT; + drive->io_32bit = 0; + } +} + #ifndef CONFIG_BLK_DEV_CMD640_ENHANCED /* * Check whether prefetch is on for a drive, @@ -384,19 +398,10 @@ static void __init check_prefetch(ide_drive_t *drive, unsigned int index) { u8 b = get_cmd640_reg(prefetch_regs[index]); - if (b & prefetch_masks[index]) { /* is prefetch off? */ - drive->no_unmask = 0; - drive->no_io_32bit = 1; - drive->io_32bit = 0; - } else { -#if CMD640_PREFETCH_MASKS - drive->no_unmask = 1; - drive->unmask = 0; -#endif - drive->no_io_32bit = 0; - } + __set_prefetch_mode(drive, (b & prefetch_masks[index]) ? 0 : 1); } #else + /* * Sets prefetch mode for a drive. */ @@ -408,19 +413,11 @@ static void set_prefetch_mode(ide_drive_t *drive, unsigned int index, int mode) spin_lock_irqsave(&cmd640_lock, flags); b = __get_cmd640_reg(reg); - if (mode) { /* want prefetch on? */ -#if CMD640_PREFETCH_MASKS - drive->no_unmask = 1; - drive->unmask = 0; -#endif - drive->no_io_32bit = 0; + __set_prefetch_mode(drive, mode); + if (mode) b &= ~prefetch_masks[index]; /* enable prefetch */ - } else { - drive->no_unmask = 0; - drive->no_io_32bit = 1; - drive->io_32bit = 0; + else b |= prefetch_masks[index]; /* disable prefetch */ - } __put_cmd640_reg(reg, b); spin_unlock_irqrestore(&cmd640_lock, flags); } @@ -471,10 +468,10 @@ static void program_drive_counts(ide_drive_t *drive, unsigned int index) */ if (index > 1) { ide_hwif_t *hwif = drive->hwif; - ide_drive_t *peer = &hwif->drives[!drive->select.b.unit]; + ide_drive_t *peer = &hwif->drives[!(drive->dn & 1)]; unsigned int mate = index ^ 1; - if (peer->present) { + if (peer->dev_flags & IDE_DFLAG_PRESENT) { if (setup_count < setup_counts[mate]) setup_count = setup_counts[mate]; if (active_count < active_counts[mate]) @@ -610,7 +607,7 @@ static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio) static void cmd640_init_dev(ide_drive_t *drive) { - unsigned int i = drive->hwif->channel * 2 + drive->select.b.unit; + unsigned int i = drive->hwif->channel * 2 + (drive->dn & 1); #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED /* @@ -629,7 +626,7 @@ static void cmd640_init_dev(ide_drive_t *drive) */ check_prefetch(drive, i); printk(KERN_INFO DRV_NAME ": drive%d timings/prefetch(%s) preserved\n", - i, drive->no_io_32bit ? "off" : "on"); + i, (drive->dev_flags & IDE_DFLAG_NO_IO_32BIT) ? "off" : "on"); #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ } diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c index e064398e03b..935385c77e0 100644 --- a/drivers/ide/pci/cmd64x.c +++ b/drivers/ide/pci/cmd64x.c @@ -13,7 +13,6 @@ #include <linux/module.h> #include <linux/types.h> #include <linux/pci.h> -#include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> @@ -229,7 +228,7 @@ static int cmd648_dma_end(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); unsigned long base = hwif->dma_base - (hwif->channel * 8); - int err = __ide_dma_end(drive); + int err = ide_dma_end(drive); u8 irq_mask = hwif->channel ? MRDMODE_INTR_CH1 : MRDMODE_INTR_CH0; u8 mrdmode = inb(base + 1); @@ -249,7 +248,7 @@ static int cmd64x_dma_end(ide_drive_t *drive) u8 irq_mask = hwif->channel ? ARTTIM23_INTR_CH1 : CFR_INTR_CH0; u8 irq_stat = 0; - int err = __ide_dma_end(drive); + int err = ide_dma_end(drive); (void) pci_read_config_byte(dev, irq_reg, &irq_stat); /* clear the interrupt bit */ @@ -332,7 +331,7 @@ static int cmd646_1_dma_end(ide_drive_t *drive) return (dma_stat & 7) != 4; } -static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev) +static unsigned int init_chipset_cmd64x(struct pci_dev *dev) { u8 mrdmode = 0; @@ -506,21 +505,23 @@ static const struct pci_device_id cmd64x_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, cmd64x_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver cmd64x_pci_driver = { .name = "CMD64x_IDE", .id_table = cmd64x_pci_tbl, .probe = cmd64x_init_one, .remove = ide_pci_remove, + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, }; static int __init cmd64x_ide_init(void) { - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&cmd64x_pci_driver); } static void __exit cmd64x_ide_exit(void) { - pci_unregister_driver(&driver); + pci_unregister_driver(&cmd64x_pci_driver); } module_init(cmd64x_ide_init); diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c index 151844fcbb0..5efb467f8fa 100644 --- a/drivers/ide/pci/cs5520.c +++ b/drivers/ide/pci/cs5520.c @@ -35,7 +35,6 @@ #include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> -#include <linux/hdreg.h> #include <linux/init.h> #include <linux/pci.h> #include <linux/ide.h> @@ -146,15 +145,17 @@ static const struct pci_device_id cs5520_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, cs5520_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver cs5520_pci_driver = { .name = "Cyrix_IDE", .id_table = cs5520_pci_tbl, .probe = cs5520_init_one, + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, }; static int __init cs5520_ide_init(void) { - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&cs5520_pci_driver); } module_init(cs5520_ide_init); diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c index f235db8c678..53f079cc00a 100644 --- a/drivers/ide/pci/cs5530.c +++ b/drivers/ide/pci/cs5530.c @@ -15,7 +15,6 @@ #include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> -#include <linux/hdreg.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/ide.h> @@ -81,17 +80,19 @@ static void cs5530_set_pio_mode(ide_drive_t *drive, const u8 pio) static u8 cs5530_udma_filter(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - ide_drive_t *mate = &hwif->drives[(drive->dn & 1) ^ 1]; - struct hd_driveid *mateid = mate->id; + ide_drive_t *mate = ide_get_pair_dev(drive); + u16 *mateid = mate->id; u8 mask = hwif->ultra_mask; - if (mate->present == 0) + if (mate == NULL) goto out; - if ((mateid->capability & 1) && __ide_dma_bad_drive(mate) == 0) { - if ((mateid->field_valid & 4) && (mateid->dma_ultra & 7)) + if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) { + if ((mateid[ATA_ID_FIELD_VALID] & 4) && + (mateid[ATA_ID_UDMA_MODES] & 7)) goto out; - if ((mateid->field_valid & 2) && (mateid->dma_mword & 7)) + if ((mateid[ATA_ID_FIELD_VALID] & 2) && + (mateid[ATA_ID_MWDMA_MODES] & 7)) mask = 0; } out: @@ -133,7 +134,7 @@ static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode) * Initialize the cs5530 bridge for reliable IDE DMA operation. */ -static unsigned int __devinit init_chipset_cs5530(struct pci_dev *dev) +static unsigned int init_chipset_cs5530(struct pci_dev *dev) { struct pci_dev *master_0 = NULL, *cs5530_0 = NULL; @@ -266,21 +267,23 @@ static const struct pci_device_id cs5530_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, cs5530_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver cs5530_pci_driver = { .name = "CS5530 IDE", .id_table = cs5530_pci_tbl, .probe = cs5530_init_one, .remove = ide_pci_remove, + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, }; static int __init cs5530_ide_init(void) { - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&cs5530_pci_driver); } static void __exit cs5530_ide_exit(void) { - pci_unregister_driver(&driver); + pci_unregister_driver(&cs5530_pci_driver); } module_init(cs5530_ide_init); diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c index dd3dc23af99..983d957a018 100644 --- a/drivers/ide/pci/cs5535.c +++ b/drivers/ide/pci/cs5535.c @@ -76,16 +76,16 @@ static unsigned int cs5535_udma_timings[5] = static void cs5535_set_speed(ide_drive_t *drive, const u8 speed) { u32 reg = 0, dummy; - int unit = drive->select.b.unit; + u8 unit = drive->dn & 1; /* Set the PIO timings */ if (speed < XFER_SW_DMA_0) { - ide_drive_t *pair = ide_get_paired_drive(drive); + ide_drive_t *pair = ide_get_pair_dev(drive); u8 cmd, pioa; cmd = pioa = speed - XFER_PIO_0; - if (pair->present) { + if (pair) { u8 piob = ide_get_best_pio_mode(pair, 255, 4); if (piob < cmd) @@ -192,21 +192,23 @@ static const struct pci_device_id cs5535_pci_tbl[] = { MODULE_DEVICE_TABLE(pci, cs5535_pci_tbl); -static struct pci_driver driver = { - .name = "CS5535_IDE", - .id_table = cs5535_pci_tbl, - .probe = cs5535_init_one, - .remove = ide_pci_remove, +static struct pci_driver cs5535_pci_driver = { + .name = "CS5535_IDE", + .id_table = cs5535_pci_tbl, + .probe = cs5535_init_one, + .remove = ide_pci_remove, + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, }; static int __init cs5535_ide_init(void) { - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&cs5535_pci_driver); } static void __exit cs5535_ide_exit(void) { - pci_unregister_driver(&driver); + pci_unregister_driver(&cs5535_pci_driver); } module_init(cs5535_ide_init); diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c index e6d8ee88d56..5297f07d293 100644 --- a/drivers/ide/pci/cy82c693.c +++ b/drivers/ide/pci/cy82c693.c @@ -50,18 +50,11 @@ #define DRV_NAME "cy82c693" -/* the current version */ -#define CY82_VERSION "CY82C693U driver v0.34 99-13-12 Andreas S. Krebs (akrebs@altavista.net)" - /* * The following are used to debug the driver. */ -#define CY82C693_DEBUG_LOGS 0 #define CY82C693_DEBUG_INFO 0 -/* define CY82C693_SETDMA_CLOCK to set DMA Controller Clock Speed to ATCLK */ -#undef CY82C693_SETDMA_CLOCK - /* * NOTE: the value for busmaster timeout is tricky and I got it by * trial and error! By using a to low value will cause DMA timeouts @@ -89,7 +82,6 @@ #define CY82_INDEX_PORT 0x22 #define CY82_DATA_PORT 0x23 -#define CY82_INDEX_CTRLREG1 0x01 #define CY82_INDEX_CHANNEL0 0x30 #define CY82_INDEX_CHANNEL1 0x31 #define CY82_INDEX_TIMEOUT 0x32 @@ -179,17 +171,6 @@ static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode) index = hwif->channel ? CY82_INDEX_CHANNEL1 : CY82_INDEX_CHANNEL0; -#if CY82C693_DEBUG_LOGS - /* for debug let's show the previous values */ - - outb(index, CY82_INDEX_PORT); - data = inb(CY82_DATA_PORT); - - printk(KERN_INFO "%s (ch=%d, dev=%d): DMA mode is %d (single=%d)\n", - drive->name, HWIF(drive)->channel, drive->select.b.unit, - (data&0x3), ((data>>2)&1)); -#endif /* CY82C693_DEBUG_LOGS */ - data = (mode & 3) | (single << 2); outb(index, CY82_INDEX_PORT); @@ -197,8 +178,7 @@ static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode) #if CY82C693_DEBUG_INFO printk(KERN_INFO "%s (ch=%d, dev=%d): set DMA mode to %d (single=%d)\n", - drive->name, HWIF(drive)->channel, drive->select.b.unit, - mode & 3, single); + drive->name, hwif->channel, drive->dn & 1, mode & 3, single); #endif /* CY82C693_DEBUG_INFO */ /* @@ -239,50 +219,11 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) } } -#if CY82C693_DEBUG_LOGS - /* for debug let's show the register values */ - - if (drive->select.b.unit == 0) { - /* - * get master drive registers - * address setup control register - * is 32 bit !!! - */ - pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); - addrCtrl &= 0x0F; - - /* now let's get the remaining registers */ - pci_read_config_byte(dev, CY82_IDE_MASTER_IOR, &pclk.time_16r); - pci_read_config_byte(dev, CY82_IDE_MASTER_IOW, &pclk.time_16w); - pci_read_config_byte(dev, CY82_IDE_MASTER_8BIT, &pclk.time_8); - } else { - /* - * set slave drive registers - * address setup control register - * is 32 bit !!! - */ - pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); - - addrCtrl &= 0xF0; - addrCtrl >>= 4; - - /* now let's get the remaining registers */ - pci_read_config_byte(dev, CY82_IDE_SLAVE_IOR, &pclk.time_16r); - pci_read_config_byte(dev, CY82_IDE_SLAVE_IOW, &pclk.time_16w); - pci_read_config_byte(dev, CY82_IDE_SLAVE_8BIT, &pclk.time_8); - } - - printk(KERN_INFO "%s (ch=%d, dev=%d): PIO timing is " - "(addr=0x%X, ior=0x%X, iow=0x%X, 8bit=0x%X)\n", - drive->name, hwif->channel, drive->select.b.unit, - addrCtrl, pclk.time_16r, pclk.time_16w, pclk.time_8); -#endif /* CY82C693_DEBUG_LOGS */ - /* let's calc the values for this PIO mode */ compute_clocks(pio, &pclk); /* now let's write the clocks registers */ - if (drive->select.b.unit == 0) { + if ((drive->dn & 1) == 0) { /* * set master drive * address setup control register @@ -324,63 +265,11 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) #if CY82C693_DEBUG_INFO printk(KERN_INFO "%s (ch=%d, dev=%d): set PIO timing to " "(addr=0x%X, ior=0x%X, iow=0x%X, 8bit=0x%X)\n", - drive->name, hwif->channel, drive->select.b.unit, + drive->name, hwif->channel, drive->dn & 1, addrCtrl, pclk.time_16r, pclk.time_16w, pclk.time_8); #endif /* CY82C693_DEBUG_INFO */ } -/* - * this function is called during init and is used to setup the cy82c693 chip - */ -static unsigned int __devinit init_chipset_cy82c693(struct pci_dev *dev) -{ - if (PCI_FUNC(dev->devfn) != 1) - return 0; - -#ifdef CY82C693_SETDMA_CLOCK - u8 data = 0; -#endif /* CY82C693_SETDMA_CLOCK */ - - /* write info about this verion of the driver */ - printk(KERN_INFO CY82_VERSION "\n"); - -#ifdef CY82C693_SETDMA_CLOCK - /* okay let's set the DMA clock speed */ - - outb(CY82_INDEX_CTRLREG1, CY82_INDEX_PORT); - data = inb(CY82_DATA_PORT); - -#if CY82C693_DEBUG_INFO - printk(KERN_INFO DRV_NAME ": Peripheral Configuration Register: 0x%X\n", - data); -#endif /* CY82C693_DEBUG_INFO */ - - /* - * for some reason sometimes the DMA controller - * speed is set to ATCLK/2 ???? - we fix this here - * - * note: i don't know what causes this strange behaviour, - * but even changing the dma speed doesn't solve it :-( - * the ide performance is still only half the normal speed - * - * if anybody knows what goes wrong with my machine, please - * let me know - ASK - */ - - data |= 0x03; - - outb(CY82_INDEX_CTRLREG1, CY82_INDEX_PORT); - outb(data, CY82_DATA_PORT); - -#if CY82C693_DEBUG_INFO - printk(KERN_INFO ": New Peripheral Configuration Register: 0x%X\n", - data); -#endif /* CY82C693_DEBUG_INFO */ - -#endif /* CY82C693_SETDMA_CLOCK */ - return 0; -} - static void __devinit init_iops_cy82c693(ide_hwif_t *hwif) { static ide_hwif_t *primary; @@ -401,7 +290,6 @@ static const struct ide_port_ops cy82c693_port_ops = { static const struct ide_port_info cy82c693_chipset __devinitdata = { .name = DRV_NAME, - .init_chipset = init_chipset_cy82c693, .init_iops = init_iops_cy82c693, .port_ops = &cy82c693_port_ops, .chipset = ide_cy82c693, @@ -443,21 +331,23 @@ static const struct pci_device_id cy82c693_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, cy82c693_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver cy82c693_pci_driver = { .name = "Cypress_IDE", .id_table = cy82c693_pci_tbl, .probe = cy82c693_init_one, .remove = __devexit_p(cy82c693_remove), + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, }; static int __init cy82c693_ide_init(void) { - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&cy82c693_pci_driver); } static void __exit cy82c693_ide_exit(void) { - pci_unregister_driver(&driver); + pci_unregister_driver(&cy82c693_pci_driver); } module_init(cy82c693_ide_init); diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c index f84bfb4f600..8689a706f53 100644 --- a/drivers/ide/pci/delkin_cb.c +++ b/drivers/ide/pci/delkin_cb.c @@ -19,7 +19,6 @@ #include <linux/types.h> #include <linux/module.h> -#include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> #include <linux/pci.h> @@ -118,7 +117,7 @@ static struct pci_device_id delkin_cb_pci_tbl[] __devinitdata = { }; MODULE_DEVICE_TABLE(pci, delkin_cb_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver delkin_cb_pci_driver = { .name = "Delkin-ASKA-Workbit Cardbus IDE", .id_table = delkin_cb_pci_tbl, .probe = delkin_cb_probe, @@ -127,12 +126,12 @@ static struct pci_driver driver = { static int __init delkin_cb_init(void) { - return pci_register_driver(&driver); + return pci_register_driver(&delkin_cb_pci_driver); } static void __exit delkin_cb_exit(void) { - pci_unregister_driver(&driver); + pci_unregister_driver(&delkin_cb_pci_driver); } module_init(delkin_cb_init); diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c index b07d4f4273b..474f96a7c07 100644 --- a/drivers/ide/pci/generic.c +++ b/drivers/ide/pci/generic.c @@ -22,7 +22,6 @@ #include <linux/types.h> #include <linux/module.h> #include <linux/kernel.h> -#include <linux/hdreg.h> #include <linux/pci.h> #include <linux/ide.h> #include <linux/init.h> @@ -167,21 +166,23 @@ static const struct pci_device_id generic_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, generic_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver generic_pci_driver = { .name = "PCI_IDE", .id_table = generic_pci_tbl, .probe = generic_init_one, .remove = ide_pci_remove, + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, }; static int __init generic_ide_init(void) { - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&generic_pci_driver); } static void __exit generic_ide_exit(void) { - pci_unregister_driver(&driver); + pci_unregister_driver(&generic_pci_driver); } module_init(generic_ide_init); diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c index 6009b0b9655..fb1a3aa57f0 100644 --- a/drivers/ide/pci/hpt34x.c +++ b/drivers/ide/pci/hpt34x.c @@ -27,7 +27,6 @@ #include <linux/types.h> #include <linux/kernel.h> #include <linux/ioport.h> -#include <linux/hdreg.h> #include <linux/interrupt.h> #include <linux/pci.h> #include <linux/init.h> @@ -79,7 +78,7 @@ static void hpt34x_set_pio_mode(ide_drive_t *drive, const u8 pio) */ #define HPT34X_PCI_INIT_REG 0x80 -static unsigned int __devinit init_chipset_hpt34x(struct pci_dev *dev) +static unsigned int init_chipset_hpt34x(struct pci_dev *dev) { int i = 0; unsigned long hpt34xIoBase = pci_resource_start(dev, 4); @@ -167,21 +166,23 @@ static const struct pci_device_id hpt34x_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, hpt34x_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver hpt34x_pci_driver = { .name = "HPT34x_IDE", .id_table = hpt34x_pci_tbl, .probe = hpt34x_init_one, .remove = ide_pci_remove, + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, }; static int __init hpt34x_ide_init(void) { - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&hpt34x_pci_driver); } static void __exit hpt34x_ide_exit(void) { - pci_unregister_driver(&driver); + pci_unregister_driver(&hpt34x_pci_driver); } module_init(hpt34x_ide_init); diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index eb107eef0db..9cf171cb937 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -122,7 +122,6 @@ #include <linux/kernel.h> #include <linux/delay.h> #include <linux/blkdev.h> -#include <linux/hdreg.h> #include <linux/interrupt.h> #include <linux/pci.h> #include <linux/init.h> @@ -605,14 +604,22 @@ static const struct hpt_info hpt371n __devinitdata = { static int check_in_drive_list(ide_drive_t *drive, const char **list) { - struct hd_driveid *id = drive->id; + char *m = (char *)&drive->id[ATA_ID_PROD]; while (*list) - if (!strcmp(*list++,id->model)) + if (!strcmp(*list++, m)) return 1; return 0; } +static struct hpt_info *hpt3xx_get_info(struct device *dev) +{ + struct ide_host *host = dev_get_drvdata(dev); + struct hpt_info *info = (struct hpt_info *)host->host_priv; + + return dev == host->dev[1] ? info + 1 : info; +} + /* * The Marvell bridge chips used on the HighPoint SATA cards do not seem * to support the UltraDMA modes 1, 2, and 3 as well as any MWDMA modes... @@ -621,9 +628,7 @@ static int check_in_drive_list(ide_drive_t *drive, const char **list) static u8 hpt3xx_udma_filter(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]); + struct hpt_info *info = hpt3xx_get_info(hwif->dev); u8 mask = hwif->ultra_mask; switch (info->chip_type) { @@ -649,7 +654,7 @@ static u8 hpt3xx_udma_filter(ide_drive_t *drive) case HPT372A: case HPT372N: case HPT374 : - if (ide_dev_is_sata(drive->id)) + if (ata_id_is_sata(drive->id)) mask &= ~0x0e; /* Fall thru */ default: @@ -662,16 +667,14 @@ static u8 hpt3xx_udma_filter(ide_drive_t *drive) static u8 hpt3xx_mdma_filter(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]); + struct hpt_info *info = hpt3xx_get_info(hwif->dev); switch (info->chip_type) { case HPT372 : case HPT372A: case HPT372N: case HPT374 : - if (ide_dev_is_sata(drive->id)) + if (ata_id_is_sata(drive->id)) return 0x00; /* Fall thru */ default: @@ -700,8 +703,7 @@ static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]); + struct hpt_info *info = hpt3xx_get_info(hwif->dev); struct hpt_timings *t = info->timings; u8 itr_addr = 0x40 + (drive->dn * 4); u32 old_itr = 0; @@ -728,11 +730,11 @@ static void hpt3xx_set_pio_mode(ide_drive_t *drive, const u8 pio) static void hpt3xx_quirkproc(ide_drive_t *drive) { - struct hd_driveid *id = drive->id; + char *m = (char *)&drive->id[ATA_ID_PROD]; const char **list = quirk_drives; while (*list) - if (strstr(id->model, *list++)) { + if (strstr(m, *list++)) { drive->quirk_list = 1; return; } @@ -744,8 +746,7 @@ static void hpt3xx_maskproc(ide_drive_t *drive, int mask) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]); + struct hpt_info *info = hpt3xx_get_info(hwif->dev); if (drive->quirk_list) { if (info->chip_type >= HPT370) { @@ -834,7 +835,7 @@ static int hpt370_dma_end(ide_drive_t *drive) if (dma_stat & 0x01) hpt370_irq_timeout(drive); } - return __ide_dma_end(drive); + return ide_dma_end(drive); } static void hpt370_dma_timeout(ide_drive_t *drive) @@ -862,9 +863,6 @@ static int hpt374_dma_test_irq(ide_drive_t *drive) if (dma_stat & 4) return 1; - if (!drive->waiting_for_dma) - printk(KERN_WARNING "%s: (%s) called while not waiting\n", - drive->name, __func__); return 0; } @@ -879,7 +877,7 @@ static int hpt374_dma_end(ide_drive_t *drive) pci_read_config_byte(dev, mcr_addr, &mcr); if (bwsr & mask) pci_write_config_byte(dev, mcr_addr, mcr | 0x30); - return __ide_dma_end(drive); + return ide_dma_end(drive); } /** @@ -942,7 +940,7 @@ static void hpt3xxn_rw_disk(ide_drive_t *drive, struct request *rq) * Perform a calibration cycle on the DPLL. * Returns 1 if this succeeds */ -static int __devinit hpt37x_calibrate_dpll(struct pci_dev *dev, u16 f_low, u16 f_high) +static int hpt37x_calibrate_dpll(struct pci_dev *dev, u16 f_low, u16 f_high) { u32 dpll = (f_high << 16) | f_low | 0x100; u8 scr2; @@ -970,11 +968,40 @@ static int __devinit hpt37x_calibrate_dpll(struct pci_dev *dev, u16 f_low, u16 f return 1; } -static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev) +static void hpt3xx_disable_fast_irq(struct pci_dev *dev, u8 mcr_addr) { - unsigned long io_base = pci_resource_start(dev, 4); struct ide_host *host = pci_get_drvdata(dev); struct hpt_info *info = host->host_priv + (&dev->dev == host->dev[1]); + u8 chip_type = info->chip_type; + u8 new_mcr, old_mcr = 0; + + /* + * Disable the "fast interrupt" prediction. Don't hold off + * on interrupts. (== 0x01 despite what the docs say) + */ + pci_read_config_byte(dev, mcr_addr + 1, &old_mcr); + + if (chip_type >= HPT374) + new_mcr = old_mcr & ~0x07; + else if (chip_type >= HPT370) { + new_mcr = old_mcr; + new_mcr &= ~0x02; +#ifdef HPT_DELAY_INTERRUPT + new_mcr &= ~0x01; +#else + new_mcr |= 0x01; +#endif + } else /* HPT366 and HPT368 */ + new_mcr = old_mcr & ~0x80; + + if (new_mcr != old_mcr) + pci_write_config_byte(dev, mcr_addr + 1, new_mcr); +} + +static unsigned int init_chipset_hpt366(struct pci_dev *dev) +{ + unsigned long io_base = pci_resource_start(dev, 4); + struct hpt_info *info = hpt3xx_get_info(&dev->dev); const char *name = DRV_NAME; u8 pci_clk, dpll_clk = 0; /* PCI and DPLL clock in MHz */ u8 chip_type; @@ -1208,17 +1235,18 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev) * NOTE: This register is only writeable via I/O space. */ if (chip_type == HPT371N && clock == ATA_CLOCK_66MHZ) - outb(inb(io_base + 0x9c) | 0x04, io_base + 0x9c); + hpt3xx_disable_fast_irq(dev, 0x50); + hpt3xx_disable_fast_irq(dev, 0x54); + return dev->irq; } static u8 hpt3xx_cable_detect(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]); + struct hpt_info *info = hpt3xx_get_info(hwif->dev); u8 chip_type = info->chip_type; u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02; @@ -1262,11 +1290,9 @@ static u8 hpt3xx_cable_detect(ide_hwif_t *hwif) static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]); + struct hpt_info *info = hpt3xx_get_info(hwif->dev); int serialize = HPT_SERIALIZE_IO; u8 chip_type = info->chip_type; - u8 new_mcr, old_mcr = 0; /* Cache the channel's MISC. control registers' offset */ hwif->select_data = hwif->channel ? 0x54 : 0x50; @@ -1289,29 +1315,6 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) /* Serialize access to this device if needed */ if (serialize && hwif->mate) hwif->serialized = hwif->mate->serialized = 1; - - /* - * Disable the "fast interrupt" prediction. Don't hold off - * on interrupts. (== 0x01 despite what the docs say) - */ - pci_read_config_byte(dev, hwif->select_data + 1, &old_mcr); - - if (info->chip_type >= HPT374) - new_mcr = old_mcr & ~0x07; - else if (info->chip_type >= HPT370) { - new_mcr = old_mcr; - new_mcr &= ~0x02; - -#ifdef HPT_DELAY_INTERRUPT - new_mcr &= ~0x01; -#else - new_mcr |= 0x01; -#endif - } else /* HPT366 and HPT368 */ - new_mcr = old_mcr & ~0x80; - - if (new_mcr != old_mcr) - pci_write_config_byte(dev, hwif->select_data + 1, new_mcr); } static int __devinit init_dma_hpt366(ide_hwif_t *hwif, @@ -1450,7 +1453,7 @@ static const struct ide_dma_ops hpt36x_dma_ops = { .dma_setup = ide_dma_setup, .dma_exec_cmd = ide_dma_exec_cmd, .dma_start = ide_dma_start, - .dma_end = __ide_dma_end, + .dma_end = ide_dma_end, .dma_test_irq = ide_dma_test_irq, .dma_lost_irq = hpt366_dma_lost_irq, .dma_timeout = ide_dma_timeout, @@ -1616,21 +1619,23 @@ static const struct pci_device_id hpt366_pci_tbl[] __devinitconst = { }; MODULE_DEVICE_TABLE(pci, hpt366_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver hpt366_pci_driver = { .name = "HPT366_IDE", .id_table = hpt366_pci_tbl, .probe = hpt366_init_one, .remove = __devexit_p(hpt366_remove), + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, }; static int __init hpt366_ide_init(void) { - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&hpt366_pci_driver); } static void __exit hpt366_ide_exit(void) { - pci_unregister_driver(&driver); + pci_unregister_driver(&hpt366_pci_driver); } module_init(hpt366_ide_init); diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c index 652e47dd7e8..7c2feeb3c5e 100644 --- a/drivers/ide/pci/it8213.c +++ b/drivers/ide/pci/it8213.c @@ -10,7 +10,6 @@ #include <linux/types.h> #include <linux/module.h> #include <linux/pci.h> -#include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> @@ -190,21 +189,23 @@ static const struct pci_device_id it8213_pci_tbl[] = { MODULE_DEVICE_TABLE(pci, it8213_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver it8213_pci_driver = { .name = "ITE8213_IDE", .id_table = it8213_pci_tbl, .probe = it8213_init_one, .remove = ide_pci_remove, + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, }; static int __init it8213_ide_init(void) { - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&it8213_pci_driver); } static void __exit it8213_ide_exit(void) { - pci_unregister_driver(&driver); + pci_unregister_driver(&it8213_pci_driver); } module_init(it8213_ide_init); diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c index 4a1508a707c..995e18bb313 100644 --- a/drivers/ide/pci/it821x.c +++ b/drivers/ide/pci/it821x.c @@ -63,7 +63,6 @@ #include <linux/types.h> #include <linux/module.h> #include <linux/pci.h> -#include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> @@ -139,8 +138,7 @@ static void it821x_program_udma(ide_drive_t *drive, u16 timing) struct pci_dev *dev = to_pci_dev(hwif->dev); struct it821x_dev *itdev = ide_get_hwifdata(hwif); int channel = hwif->channel; - int unit = drive->select.b.unit; - u8 conf; + u8 unit = drive->dn & 1, conf; /* Program UDMA timing bits */ if(itdev->clock_mode == ATA_66) @@ -169,13 +167,11 @@ static void it821x_clock_strategy(ide_drive_t *drive) ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); struct it821x_dev *itdev = ide_get_hwifdata(hwif); + ide_drive_t *pair; + int clock, altclock, sel = 0; + u8 unit = drive->dn & 1, v; - u8 unit = drive->select.b.unit; - ide_drive_t *pair = &hwif->drives[1-unit]; - - int clock, altclock; - u8 v; - int sel = 0; + pair = &hwif->drives[1 - unit]; if(itdev->want[0][0] > itdev->want[1][0]) { clock = itdev->want[0][1]; @@ -241,16 +237,17 @@ static void it821x_clock_strategy(ide_drive_t *drive) static void it821x_set_pio_mode(ide_drive_t *drive, const u8 pio) { - ide_hwif_t *hwif = drive->hwif; + ide_hwif_t *hwif = drive->hwif; struct it821x_dev *itdev = ide_get_hwifdata(hwif); - int unit = drive->select.b.unit; - ide_drive_t *pair = &hwif->drives[1 - unit]; - u8 set_pio = pio; + ide_drive_t *pair; + u8 unit = drive->dn & 1, set_pio = pio; /* Spec says 89 ref driver uses 88 */ static u16 pio_timings[]= { 0xAA88, 0xA382, 0xA181, 0x3332, 0x3121 }; static u8 pio_want[] = { ATA_66, ATA_66, ATA_66, ATA_66, ATA_ANY }; + pair = &hwif->drives[1 - unit]; + /* * Compute the best PIO mode we can for a given device. We must * pick a speed that does not cause problems with the other device @@ -287,9 +284,7 @@ static void it821x_tune_mwdma (ide_drive_t *drive, byte mode_wanted) ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); struct it821x_dev *itdev = (void *)ide_get_hwifdata(hwif); - int unit = drive->select.b.unit; - int channel = hwif->channel; - u8 conf; + u8 unit = drive->dn & 1, channel = hwif->channel, conf; static u16 dma[] = { 0x8866, 0x3222, 0x3121 }; static u8 mwdma_want[] = { ATA_ANY, ATA_66, ATA_ANY }; @@ -326,9 +321,7 @@ static void it821x_tune_udma (ide_drive_t *drive, byte mode_wanted) ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); struct it821x_dev *itdev = ide_get_hwifdata(hwif); - int unit = drive->select.b.unit; - int channel = hwif->channel; - u8 conf; + u8 unit = drive->dn & 1, channel = hwif->channel, conf; static u16 udma[] = { 0x4433, 0x4231, 0x3121, 0x2121, 0x1111, 0x2211, 0x1111 }; static u8 udma_want[] = { ATA_ANY, ATA_50, ATA_ANY, ATA_66, ATA_66, ATA_50, ATA_66 }; @@ -370,7 +363,8 @@ static void it821x_dma_start(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; struct it821x_dev *itdev = ide_get_hwifdata(hwif); - int unit = drive->select.b.unit; + u8 unit = drive->dn & 1; + if(itdev->mwdma[unit] != MWDMA_OFF) it821x_program(drive, itdev->mwdma[unit]); else if(itdev->udma[unit] != UDMA_OFF && itdev->timing10) @@ -390,9 +384,10 @@ static void it821x_dma_start(ide_drive_t *drive) static int it821x_dma_end(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - int unit = drive->select.b.unit; struct it821x_dev *itdev = ide_get_hwifdata(hwif); - int ret = __ide_dma_end(drive); + int ret = ide_dma_end(drive); + u8 unit = drive->dn & 1; + if(itdev->mwdma[unit] != MWDMA_OFF) it821x_program(drive, itdev->pio[unit]); return ret; @@ -446,8 +441,7 @@ static u8 it821x_cable_detect(ide_hwif_t *hwif) static void it821x_quirkproc(ide_drive_t *drive) { struct it821x_dev *itdev = ide_get_hwifdata(drive->hwif); - struct hd_driveid *id = drive->id; - u16 *idbits = (u16 *)drive->id; + u16 *id = drive->id; if (!itdev->smart) { /* @@ -456,7 +450,7 @@ static void it821x_quirkproc(ide_drive_t *drive) * IRQ mask as we may well be in PIO (eg rev 0x10) * for now and we know unmasking is safe on this chipset. */ - drive->unmask = 1; + drive->dev_flags |= IDE_DFLAG_UNMASK; } else { /* * Perform fixups on smart mode. We need to "lose" some @@ -466,36 +460,36 @@ static void it821x_quirkproc(ide_drive_t *drive) */ /* Check for RAID v native */ - if(strstr(id->model, "Integrated Technology Express")) { + if (strstr((char *)&id[ATA_ID_PROD], + "Integrated Technology Express")) { /* In raid mode the ident block is slightly buggy We need to set the bits so that the IDE layer knows LBA28. LBA48 and DMA ar valid */ - id->capability |= 3; /* LBA28, DMA */ - id->command_set_2 |= 0x0400; /* LBA48 valid */ - id->cfs_enable_2 |= 0x0400; /* LBA48 on */ + id[ATA_ID_CAPABILITY] |= (3 << 8); /* LBA28, DMA */ + id[ATA_ID_COMMAND_SET_2] |= 0x0400; /* LBA48 valid */ + id[ATA_ID_CFS_ENABLE_2] |= 0x0400; /* LBA48 on */ /* Reporting logic */ printk(KERN_INFO "%s: IT8212 %sRAID %d volume", - drive->name, - idbits[147] ? "Bootable ":"", - idbits[129]); - if(idbits[129] != 1) - printk("(%dK stripe)", idbits[146]); - printk(".\n"); + drive->name, id[147] ? "Bootable " : "", + id[ATA_ID_CSFO]); + if (id[ATA_ID_CSFO] != 1) + printk(KERN_CONT "(%dK stripe)", id[146]); + printk(KERN_CONT ".\n"); } else { /* Non RAID volume. Fixups to stop the core code doing unsupported things */ - id->field_valid &= 3; - id->queue_depth = 0; - id->command_set_1 = 0; - id->command_set_2 &= 0xC400; - id->cfsse &= 0xC000; - id->cfs_enable_1 = 0; - id->cfs_enable_2 &= 0xC400; - id->csf_default &= 0xC000; - id->word127 = 0; - id->dlf = 0; - id->csfo = 0; - id->cfa_power = 0; + id[ATA_ID_FIELD_VALID] &= 3; + id[ATA_ID_QUEUE_DEPTH] = 0; + id[ATA_ID_COMMAND_SET_1] = 0; + id[ATA_ID_COMMAND_SET_2] &= 0xC400; + id[ATA_ID_CFSSE] &= 0xC000; + id[ATA_ID_CFS_ENABLE_1] = 0; + id[ATA_ID_CFS_ENABLE_2] &= 0xC400; + id[ATA_ID_CSF_DEFAULT] &= 0xC000; + id[127] = 0; + id[ATA_ID_DLF] = 0; + id[ATA_ID_CSFO] = 0; + id[ATA_ID_CFA_POWER] = 0; printk(KERN_INFO "%s: Performing identify fixups.\n", drive->name); } @@ -505,8 +499,8 @@ static void it821x_quirkproc(ide_drive_t *drive) * IDE core that DMA is supported (it821x hardware * takes care of DMA mode programming). */ - if (id->capability & 1) { - id->dma_mword |= 0x0101; + if (ata_id_has_dma(id)) { + id[ATA_ID_MWDMA_MODES] |= 0x0101; drive->current_speed = XFER_MW_DMA_0; } } @@ -588,7 +582,7 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif) hwif->mwdma_mask = ATA_MWDMA2; } -static void __devinit it8212_disable_raid(struct pci_dev *dev) +static void it8212_disable_raid(struct pci_dev *dev) { /* Reset local CPU, and set BIOS not ready */ pci_write_config_byte(dev, 0x5E, 0x01); @@ -605,7 +599,7 @@ static void __devinit it8212_disable_raid(struct pci_dev *dev) pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20); } -static unsigned int __devinit init_chipset_it821x(struct pci_dev *dev) +static unsigned int init_chipset_it821x(struct pci_dev *dev) { u8 conf; static char *mode[2] = { "pass through", "smart" }; @@ -682,21 +676,23 @@ static const struct pci_device_id it821x_pci_tbl[] = { MODULE_DEVICE_TABLE(pci, it821x_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver it821x_pci_driver = { .name = "ITE821x IDE", .id_table = it821x_pci_tbl, .probe = it821x_init_one, .remove = __devexit_p(it821x_remove), + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, }; static int __init it821x_ide_init(void) { - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&it821x_pci_driver); } static void __exit it821x_ide_exit(void) { - pci_unregister_driver(&driver); + pci_unregister_driver(&it821x_pci_driver); } module_init(it821x_ide_init); diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c index bb9d09d8f19..9a68433cf46 100644 --- a/drivers/ide/pci/jmicron.c +++ b/drivers/ide/pci/jmicron.c @@ -8,7 +8,6 @@ #include <linux/types.h> #include <linux/module.h> #include <linux/pci.h> -#include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> @@ -150,21 +149,23 @@ static struct pci_device_id jmicron_pci_tbl[] = { MODULE_DEVICE_TABLE(pci, jmicron_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver jmicron_pci_driver = { .name = "JMicron IDE", .id_table = jmicron_pci_tbl, .probe = jmicron_init_one, .remove = ide_pci_remove, + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, }; static int __init jmicron_ide_init(void) { - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&jmicron_pci_driver); } static void __exit jmicron_ide_exit(void) { - pci_unregister_driver(&driver); + pci_unregister_driver(&jmicron_pci_driver); } module_init(jmicron_ide_init); diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c index ffefcd15196..13789060f40 100644 --- a/drivers/ide/pci/ns87415.c +++ b/drivers/ide/pci/ns87415.c @@ -11,7 +11,6 @@ #include <linux/types.h> #include <linux/kernel.h> #include <linux/interrupt.h> -#include <linux/hdreg.h> #include <linux/pci.h> #include <linux/delay.h> #include <linux/ide.h> @@ -138,7 +137,7 @@ static void __devinit superio_init_iops(struct hwif_s *hwif) static unsigned int ns87415_count = 0, ns87415_control[MAX_HWIFS] = { 0 }; /* - * This routine either enables/disables (according to drive->present) + * This routine either enables/disables (according to IDE_DFLAG_PRESENT) * the IRQ associated with the port (HWIF(drive)), * and selects either PIO or DMA handshaking for the next I/O operation. */ @@ -154,11 +153,15 @@ static void ns87415_prepare_drive (ide_drive_t *drive, unsigned int use_dma) /* Adjust IRQ enable bit */ bit = 1 << (8 + hwif->channel); - new = drive->present ? (new & ~bit) : (new | bit); + + if (drive->dev_flags & IDE_DFLAG_PRESENT) + new &= ~bit; + else + new |= bit; /* Select PIO or DMA, DMA may only be selected for one drive/channel. */ - bit = 1 << (20 + drive->select.b.unit + (hwif->channel << 1)); - other = 1 << (20 + (1 - drive->select.b.unit) + (hwif->channel << 1)); + bit = 1 << (20 + (drive->dn & 1) + (hwif->channel << 1)); + other = 1 << (20 + (1 - (drive->dn & 1)) + (hwif->channel << 1)); new = use_dma ? ((new & ~other) | bit) : (new & ~bit); if (new != *old) { @@ -188,7 +191,8 @@ static void ns87415_prepare_drive (ide_drive_t *drive, unsigned int use_dma) static void ns87415_selectproc (ide_drive_t *drive) { - ns87415_prepare_drive (drive, drive->using_dma); + ns87415_prepare_drive(drive, + !!(drive->dev_flags & IDE_DFLAG_USING_DMA)); } static int ns87415_dma_end(ide_drive_t *drive) @@ -274,9 +278,9 @@ static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif) do { udelay(50); stat = hwif->tp_ops->read_status(hwif); - if (stat == 0xff) - break; - } while ((stat & BUSY_STAT) && --timeout); + if (stat == 0xff) + break; + } while ((stat & ATA_BUSY) && --timeout); #endif } @@ -335,21 +339,23 @@ static const struct pci_device_id ns87415_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, ns87415_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver ns87415_pci_driver = { .name = "NS87415_IDE", .id_table = ns87415_pci_tbl, .probe = ns87415_init_one, .remove = ide_pci_remove, + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, }; static int __init ns87415_ide_init(void) { - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&ns87415_pci_driver); } static void __exit ns87415_ide_exit(void) { - pci_unregister_driver(&driver); + pci_unregister_driver(&ns87415_pci_driver); } module_init(ns87415_ide_init); diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index e28e672ddaf..6048eda3cd6 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -85,7 +85,6 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/pci.h> -#include <linux/hdreg.h> #include <linux/ide.h> #include <asm/io.h> @@ -137,7 +136,7 @@ static u8 read_reg(int reg) static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) { ide_hwif_t *hwif = drive->hwif; - ide_drive_t *pair = ide_get_paired_drive(drive); + ide_drive_t *pair = ide_get_pair_dev(drive); unsigned long flags; u8 tim, misc, addr_pio = pio, clk; @@ -153,7 +152,7 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) drive->drive_data = XFER_PIO_0 + pio; - if (pair->present) { + if (pair) { if (pair->drive_data && pair->drive_data < drive->drive_data) addr_pio = pair->drive_data - XFER_PIO_0; } @@ -180,7 +179,7 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) misc = addr_timings[clk][addr_pio]; /* select Index-0/1 for Register-A/B */ - write_reg(drive->select.b.unit, MISC_REG); + write_reg(drive->dn & 1, MISC_REG); /* set read cycle timings */ write_reg(tim, READ_REG); /* set write cycle timings */ @@ -221,21 +220,23 @@ static const struct pci_device_id opti621_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, opti621_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver opti621_pci_driver = { .name = "Opti621_IDE", .id_table = opti621_pci_tbl, .probe = opti621_init_one, .remove = ide_pci_remove, + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, }; static int __init opti621_ide_init(void) { - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&opti621_pci_driver); } static void __exit opti621_ide_exit(void) { - pci_unregister_driver(&driver); + pci_unregister_driver(&opti621_pci_driver); } module_init(opti621_ide_init); diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c index d477da6b585..211ae46e3e0 100644 --- a/drivers/ide/pci/pdc202xx_new.c +++ b/drivers/ide/pci/pdc202xx_new.c @@ -19,7 +19,6 @@ #include <linux/types.h> #include <linux/kernel.h> #include <linux/delay.h> -#include <linux/hdreg.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/ide.h> @@ -203,10 +202,10 @@ static u8 pdcnew_cable_detect(ide_hwif_t *hwif) static void pdcnew_quirkproc(ide_drive_t *drive) { - const char **list, *model = drive->id->model; + const char **list, *m = (char *)&drive->id[ATA_ID_PROD]; for (list = pdc_quirk_drives; *list != NULL; list++) - if (strstr(model, *list) != NULL) { + if (strstr(m, *list) != NULL) { drive->quirk_list = 2; return; } @@ -227,7 +226,7 @@ static void pdcnew_reset(ide_drive_t *drive) * read_counter - Read the byte count registers * @dma_base: for the port address */ -static long __devinit read_counter(u32 dma_base) +static long read_counter(u32 dma_base) { u32 pri_dma_base = dma_base, sec_dma_base = dma_base + 0x08; u8 cnt0, cnt1, cnt2, cnt3; @@ -267,7 +266,7 @@ static long __devinit read_counter(u32 dma_base) * @dma_base: for the port address * E.g. 16949000 on 33 MHz PCI bus, i.e. half of the PCI clock. */ -static long __devinit detect_pll_input_clock(unsigned long dma_base) +static long detect_pll_input_clock(unsigned long dma_base) { struct timeval start_time, end_time; long start_count, end_count; @@ -310,7 +309,7 @@ static long __devinit detect_pll_input_clock(unsigned long dma_base) } #ifdef CONFIG_PPC_PMAC -static void __devinit apple_kiwi_init(struct pci_dev *pdev) +static void apple_kiwi_init(struct pci_dev *pdev) { struct device_node *np = pci_device_to_OF_node(pdev); u8 conf; @@ -326,7 +325,7 @@ static void __devinit apple_kiwi_init(struct pci_dev *pdev) } #endif /* CONFIG_PPC_PMAC */ -static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev) +static unsigned int init_chipset_pdcnew(struct pci_dev *dev) { const char *name = DRV_NAME; unsigned long dma_base = pci_resource_start(dev, 4); @@ -562,21 +561,23 @@ static const struct pci_device_id pdc202new_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, pdc202new_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver pdc202new_pci_driver = { .name = "Promise_IDE", .id_table = pdc202new_pci_tbl, .probe = pdc202new_init_one, .remove = __devexit_p(pdc202new_remove), + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, }; static int __init pdc202new_ide_init(void) { - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&pdc202new_pci_driver); } static void __exit pdc202new_ide_exit(void) { - pci_unregister_driver(&driver); + pci_unregister_driver(&pdc202new_pci_driver); } module_init(pdc202new_ide_init); diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c index de9a2740046..799557c25ee 100644 --- a/drivers/ide/pci/pdc202xx_old.c +++ b/drivers/ide/pci/pdc202xx_old.c @@ -13,7 +13,6 @@ #include <linux/kernel.h> #include <linux/delay.h> #include <linux/blkdev.h> -#include <linux/hdreg.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/ide.h> @@ -86,7 +85,7 @@ static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed) * Prefetch_EN / IORDY_EN / PA[3:0] bits of register A */ AP &= ~0x3f; - if (drive->id->capability & 4) + if (ata_id_iordy_disable(drive->id)) AP |= 0x20; /* set IORDY_EN bit */ if (drive->media == ide_disk) AP |= 0x10; /* set Prefetch_EN bit */ @@ -154,10 +153,10 @@ static void pdc_old_disable_66MHz_clock(ide_hwif_t *hwif) static void pdc202xx_quirkproc(ide_drive_t *drive) { - const char **list, *model = drive->id->model; + const char **list, *m = (char *)&drive->id[ATA_ID_PROD]; for (list = pdc_quirk_drives; *list != NULL; list++) - if (strstr(model, *list) != NULL) { + if (strstr(m, *list) != NULL) { drive->quirk_list = 2; return; } @@ -169,7 +168,7 @@ static void pdc202xx_dma_start(ide_drive_t *drive) { if (drive->current_speed > XFER_UDMA_2) pdc_old_enable_66MHz_clock(drive->hwif); - if (drive->media != ide_disk || drive->addressing == 1) { + if (drive->media != ide_disk || (drive->dev_flags & IDE_DFLAG_LBA48)) { struct request *rq = HWGROUP(drive)->rq; ide_hwif_t *hwif = HWIF(drive); unsigned long high_16 = hwif->extra_base - 16; @@ -189,7 +188,7 @@ static void pdc202xx_dma_start(ide_drive_t *drive) static int pdc202xx_dma_end(ide_drive_t *drive) { - if (drive->media != ide_disk || drive->addressing == 1) { + if (drive->media != ide_disk || (drive->dev_flags & IDE_DFLAG_LBA48)) { ide_hwif_t *hwif = HWIF(drive); unsigned long high_16 = hwif->extra_base - 16; unsigned long atapi_reg = high_16 + (hwif->channel ? 0x24 : 0x20); @@ -201,7 +200,7 @@ static int pdc202xx_dma_end(ide_drive_t *drive) } if (drive->current_speed > XFER_UDMA_2) pdc_old_disable_66MHz_clock(drive->hwif); - return __ide_dma_end(drive); + return ide_dma_end(drive); } static int pdc202xx_dma_test_irq(ide_drive_t *drive) @@ -265,7 +264,7 @@ static void pdc202xx_dma_timeout(ide_drive_t *drive) ide_dma_timeout(drive); } -static unsigned int __devinit init_chipset_pdc202xx(struct pci_dev *dev) +static unsigned int init_chipset_pdc202xx(struct pci_dev *dev) { unsigned long dmabase = pci_resource_start(dev, 4); u8 udma_speed_flag = 0, primary_mode = 0, secondary_mode = 0; @@ -334,7 +333,7 @@ static const struct ide_dma_ops pdc20246_dma_ops = { .dma_setup = ide_dma_setup, .dma_exec_cmd = ide_dma_exec_cmd, .dma_start = ide_dma_start, - .dma_end = __ide_dma_end, + .dma_end = ide_dma_end, .dma_test_irq = pdc202xx_dma_test_irq, .dma_lost_irq = pdc202xx_dma_lost_irq, .dma_timeout = pdc202xx_dma_timeout, @@ -427,21 +426,23 @@ static const struct pci_device_id pdc202xx_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, pdc202xx_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver pdc202xx_pci_driver = { .name = "Promise_Old_IDE", .id_table = pdc202xx_pci_tbl, .probe = pdc202xx_init_one, .remove = ide_pci_remove, + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, }; static int __init pdc202xx_ide_init(void) { - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&pdc202xx_pci_driver); } static void __exit pdc202xx_ide_exit(void) { - pci_unregister_driver(&driver); + pci_unregister_driver(&pdc202xx_pci_driver); } module_init(pdc202xx_ide_init); diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c index 30cfc815fe3..d63f9fdca76 100644 --- a/drivers/ide/pci/piix.c +++ b/drivers/ide/pci/piix.c @@ -48,7 +48,6 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/pci.h> -#include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> @@ -205,7 +204,7 @@ static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed) * out to be nice and simple. */ -static unsigned int __devinit init_chipset_ich(struct pci_dev *dev) +static unsigned int init_chipset_ich(struct pci_dev *dev) { u32 extra = 0; @@ -216,17 +215,26 @@ static unsigned int __devinit init_chipset_ich(struct pci_dev *dev) } /** - * piix_dma_clear_irq - clear BMDMA status - * @drive: IDE drive to clear + * ich_clear_irq - clear BMDMA status + * @drive: IDE drive * - * Called from ide_intr() for PIO interrupts - * to clear BMDMA status as needed by ICHx + * ICHx contollers set DMA INTR no matter DMA or PIO. + * BMDMA status might need to be cleared even for + * PIO interrupts to prevent spurious/lost IRQ. */ -static void piix_dma_clear_irq(ide_drive_t *drive) +static void ich_clear_irq(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); u8 dma_stat; + /* + * ide_dma_end() needs BMDMA status for error checking. + * So, skip clearing BMDMA status here and leave it + * to ide_dma_end() if this is DMA interrupt. + */ + if (drive->waiting_for_dma || hwif->dma_base == 0) + return; + /* clear the INTR & ERROR bits */ dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS); /* Should we force the bit as well ? */ @@ -250,6 +258,7 @@ static const struct ich_laptop ich_laptop[] = { { 0x27DF, 0x1025, 0x0110 }, /* ICH7 on Acer 3682WLMi */ { 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */ { 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */ + { 0x27DF, 0x1071, 0xD221 }, /* ICH7 on Hercules EC-900 */ { 0x24CA, 0x1025, 0x0061 }, /* ICH4 on Acer Aspire 2023WLMi */ { 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */ /* end marker */ @@ -294,21 +303,19 @@ static void __devinit init_hwif_piix(ide_hwif_t *hwif) hwif->ultra_mask = hwif->mwdma_mask = hwif->swdma_mask = 0; } -static void __devinit init_hwif_ich(ide_hwif_t *hwif) -{ - init_hwif_piix(hwif); - - /* ICHx need to clear the BMDMA status for all interrupts */ - if (hwif->dma_base) - hwif->ide_dma_clear_irq = &piix_dma_clear_irq; -} - static const struct ide_port_ops piix_port_ops = { .set_pio_mode = piix_set_pio_mode, .set_dma_mode = piix_set_dma_mode, .cable_detect = piix_cable_detect, }; +static const struct ide_port_ops ich_port_ops = { + .set_pio_mode = piix_set_pio_mode, + .set_dma_mode = piix_set_dma_mode, + .clear_irq = ich_clear_irq, + .cable_detect = piix_cable_detect, +}; + #ifndef CONFIG_IA64 #define IDE_HFLAGS_PIIX IDE_HFLAG_LEGACY_IRQS #else @@ -332,9 +339,9 @@ static const struct ide_port_ops piix_port_ops = { { \ .name = DRV_NAME, \ .init_chipset = init_chipset_ich, \ - .init_hwif = init_hwif_ich, \ + .init_hwif = init_hwif_piix, \ .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \ - .port_ops = &piix_port_ops, \ + .port_ops = &ich_port_ops, \ .host_flags = IDE_HFLAGS_PIIX, \ .pio_mask = ATA_PIO4, \ .swdma_mask = ATA_SWDMA2_ONLY, \ @@ -445,22 +452,24 @@ static const struct pci_device_id piix_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, piix_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver piix_pci_driver = { .name = "PIIX_IDE", .id_table = piix_pci_tbl, .probe = piix_init_one, .remove = ide_pci_remove, + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, }; static int __init piix_ide_init(void) { piix_check_450nx(); - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&piix_pci_driver); } static void __exit piix_ide_exit(void) { - pci_unregister_driver(&driver); + pci_unregister_driver(&piix_pci_driver); } module_init(piix_ide_init); diff --git a/drivers/ide/pci/rz1000.c b/drivers/ide/pci/rz1000.c index 8d11ee838a2..7daf0135cba 100644 --- a/drivers/ide/pci/rz1000.c +++ b/drivers/ide/pci/rz1000.c @@ -16,7 +16,6 @@ #include <linux/types.h> #include <linux/module.h> #include <linux/kernel.h> -#include <linux/hdreg.h> #include <linux/pci.h> #include <linux/ide.h> #include <linux/init.h> @@ -60,7 +59,7 @@ static const struct pci_device_id rz1000_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, rz1000_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver rz1000_pci_driver = { .name = "RZ1000_IDE", .id_table = rz1000_pci_tbl, .probe = rz1000_init_one, @@ -69,12 +68,12 @@ static struct pci_driver driver = { static int __init rz1000_ide_init(void) { - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&rz1000_pci_driver); } static void __exit rz1000_ide_exit(void) { - pci_unregister_driver(&driver); + pci_unregister_driver(&rz1000_pci_driver); } module_init(rz1000_ide_init); diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c index 8efaed16fea..f1a8758e3a9 100644 --- a/drivers/ide/pci/sc1200.c +++ b/drivers/ide/pci/sc1200.c @@ -14,7 +14,6 @@ #include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> -#include <linux/hdreg.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/ide.h> @@ -104,17 +103,19 @@ static void sc1200_tunepio(ide_drive_t *drive, u8 pio) static u8 sc1200_udma_filter(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - ide_drive_t *mate = &hwif->drives[(drive->dn & 1) ^ 1]; - struct hd_driveid *mateid = mate->id; + ide_drive_t *mate = ide_get_pair_dev(drive); + u16 *mateid = mate->id; u8 mask = hwif->ultra_mask; - if (mate->present == 0) + if (mate == NULL) goto out; - if ((mateid->capability & 1) && __ide_dma_bad_drive(mate) == 0) { - if ((mateid->field_valid & 4) && (mateid->dma_ultra & 7)) + if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) { + if ((mateid[ATA_ID_FIELD_VALID] & 4) && + (mateid[ATA_ID_UDMA_MODES] & 7)) goto out; - if ((mateid->field_valid & 2) && (mateid->dma_mword & 7)) + if ((mateid[ATA_ID_FIELD_VALID] & 2) && + (mateid[ATA_ID_MWDMA_MODES] & 7)) mask = 0; } out: @@ -125,7 +126,6 @@ static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); - int unit = drive->select.b.unit; unsigned int reg, timings; unsigned short pci_clock; unsigned int basereg = hwif->channel ? 0x50 : 0x40; @@ -154,7 +154,7 @@ static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode) else timings = mwdma_timing[pci_clock][mode - XFER_MW_DMA_0]; - if (unit == 0) { /* are we configuring drive0? */ + if ((drive->dn & 1) == 0) { pci_read_config_dword(dev, basereg + 4, ®); timings |= reg & 0x80000000; /* preserve PIO format bit */ pci_write_config_dword(dev, basereg + 4, timings); @@ -215,7 +215,8 @@ static void sc1200_set_pio_mode(ide_drive_t *drive, const u8 pio) if (mode != -1) { printk("SC1200: %s: changing (U)DMA mode\n", drive->name); ide_dma_off_quietly(drive); - if (ide_set_dma_mode(drive, mode) == 0 && drive->using_dma) + if (ide_set_dma_mode(drive, mode) == 0 && + (drive->dev_flags & IDE_DFLAG_USING_DMA)) hwif->dma_ops->dma_host_set(drive, 1); return; } @@ -327,7 +328,7 @@ static const struct pci_device_id sc1200_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, sc1200_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver sc1200_pci_driver = { .name = "SC1200_IDE", .id_table = sc1200_pci_tbl, .probe = sc1200_init_one, @@ -340,12 +341,12 @@ static struct pci_driver driver = { static int __init sc1200_ide_init(void) { - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&sc1200_pci_driver); } static void __exit sc1200_ide_exit(void) { - pci_unregister_driver(&driver); + pci_unregister_driver(&sc1200_pci_driver); } module_init(sc1200_ide_init); diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c index 44cccd1e086..9ce1d805992 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/pci/scc_pata.c @@ -26,7 +26,6 @@ #include <linux/module.h> #include <linux/pci.h> #include <linux/delay.h> -#include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> @@ -292,7 +291,7 @@ static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed) static void scc_dma_host_set(ide_drive_t *drive, int on) { ide_hwif_t *hwif = drive->hwif; - u8 unit = (drive->select.b.unit & 0x01); + u8 unit = drive->dn & 1; u8 dma_stat = scc_ide_inb(hwif->dma_base + 4); if (on) @@ -354,7 +353,6 @@ static void scc_dma_start(ide_drive_t *drive) /* start DMA */ scc_ide_outb(dma_cmd | 1, hwif->dma_base); - hwif->dma = 1; wmb(); } @@ -375,7 +373,6 @@ static int __scc_dma_end(ide_drive_t *drive) /* purge DMA mappings */ ide_destroy_dmatable(drive); /* verify good DMA status */ - hwif->dma = 0; wmb(); return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0; } @@ -400,7 +397,7 @@ static int scc_dma_end(ide_drive_t *drive) /* errata A308 workaround: Step5 (check data loss) */ /* We don't check non ide_disk because it is limited to UDMA4 */ if (!(in_be32((void __iomem *)hwif->io_ports.ctl_addr) - & ERR_STAT) && + & ATA_ERR) && drive->media == ide_disk && drive->current_speed > XFER_UDMA_4) { reg = in_be32((void __iomem *)intsts_port); if (!(reg & INTSTS_ACTEINT)) { @@ -504,7 +501,7 @@ static int scc_dma_test_irq(ide_drive_t *drive) /* SCC errata A252,A308 workaround: Step4 */ if ((in_be32((void __iomem *)hwif->io_ports.ctl_addr) - & ERR_STAT) && + & ATA_ERR) && (int_stat & INTSTS_INTRQ)) return 1; @@ -512,9 +509,6 @@ static int scc_dma_test_irq(ide_drive_t *drive) if (int_stat & INTSTS_IOIRQS) return 1; - if (!drive->waiting_for_dma) - printk(KERN_WARNING "%s: (%s) called while not waiting\n", - drive->name, __func__); return 0; } @@ -711,7 +705,7 @@ static void scc_tf_load(ide_drive_t *drive, ide_task_t *task) scc_ide_outb(tf->lbah, io_ports->lbah_addr); if (task->tf_flags & IDE_TFLAG_OUT_DEVICE) - scc_ide_outb((tf->device & HIHI) | drive->select.all, + scc_ide_outb((tf->device & HIHI) | drive->select, io_ports->device_addr); } @@ -827,6 +821,12 @@ static void __devinit init_iops_scc(ide_hwif_t *hwif) init_mmio_iops_scc(hwif); } +static int __devinit scc_init_dma(ide_hwif_t *hwif, + const struct ide_port_info *d) +{ + return ide_allocate_dma_engine(hwif); +} + static u8 scc_cable_detect(ide_hwif_t *hwif) { return ATA_CBL_PATA80; @@ -891,6 +891,7 @@ static const struct ide_dma_ops scc_dma_ops = { { \ .name = name_str, \ .init_iops = init_iops_scc, \ + .init_dma = scc_init_dma, \ .init_hwif = init_hwif_scc, \ .tp_ops = &scc_tp_ops, \ .port_ops = &scc_port_ops, \ @@ -928,13 +929,6 @@ static void __devexit scc_remove(struct pci_dev *dev) { struct scc_ports *ports = pci_get_drvdata(dev); struct ide_host *host = ports->host; - ide_hwif_t *hwif = host->ports[0]; - - if (hwif->dmatable_cpu) { - pci_free_consistent(dev, PRD_ENTRIES * PRD_BYTES, - hwif->dmatable_cpu, hwif->dmatable_dma); - hwif->dmatable_cpu = NULL; - } ide_host_remove(host); @@ -950,7 +944,7 @@ static const struct pci_device_id scc_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, scc_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver scc_pci_driver = { .name = "SCC IDE", .id_table = scc_pci_tbl, .probe = scc_init_one, @@ -959,14 +953,14 @@ static struct pci_driver driver = { static int scc_ide_init(void) { - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&scc_pci_driver); } module_init(scc_ide_init); /* -- No exit code? static void scc_ide_exit(void) { - ide_pci_unregister_driver(&driver); + ide_pci_unregister_driver(&scc_pci_driver); } module_exit(scc_ide_exit); */ diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c index c3bdc6e51a4..437bc919daf 100644 --- a/drivers/ide/pci/serverworks.c +++ b/drivers/ide/pci/serverworks.c @@ -32,7 +32,6 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/pci.h> -#include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> @@ -57,8 +56,10 @@ static struct pci_dev *isa_dev; static int check_in_drive_lists (ide_drive_t *drive, const char **list) { + char *m = (char *)&drive->id[ATA_ID_PROD]; + while (*list) - if (!strcmp(*list++, drive->id->model)) + if (!strcmp(*list++, m)) return 1; return 0; } @@ -152,7 +153,7 @@ static void svwks_set_dma_mode(ide_drive_t *drive, const u8 speed) ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 unit = (drive->select.b.unit & 0x01); + u8 unit = drive->dn & 1; u8 ultra_enable = 0, ultra_timing = 0, dma_timing = 0; @@ -174,7 +175,7 @@ static void svwks_set_dma_mode(ide_drive_t *drive, const u8 speed) pci_write_config_byte(dev, 0x54, ultra_enable); } -static unsigned int __devinit init_chipset_svwks(struct pci_dev *dev) +static unsigned int init_chipset_svwks(struct pci_dev *dev) { unsigned int reg; u8 btr; @@ -442,21 +443,23 @@ static const struct pci_device_id svwks_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, svwks_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver svwks_pci_driver = { .name = "Serverworks_IDE", .id_table = svwks_pci_tbl, .probe = svwks_init_one, .remove = ide_pci_remove, + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, }; static int __init svwks_ide_init(void) { - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&svwks_pci_driver); } static void __exit svwks_ide_exit(void) { - pci_unregister_driver(&driver); + pci_unregister_driver(&svwks_pci_driver); } module_init(svwks_ide_init); diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index 681306c9d79..dd634541ce3 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -1,5 +1,6 @@ /* * Copyright (c) 2003-2006 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (C) 2008 MontaVista Software, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License @@ -22,7 +23,6 @@ #include <linux/types.h> #include <linux/pci.h> #include <linux/delay.h> -#include <linux/hdreg.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/ioport.h> @@ -151,7 +151,7 @@ sgiioc4_clearirq(ide_drive_t * drive) int count = 0; stat = sgiioc4_read_status(hwif); - while ((stat & 0x80) && (count++ < 100)) { + while ((stat & ATA_BUSY) && (count++ < 100)) { udelay(1); stat = sgiioc4_read_status(hwif); } @@ -311,7 +311,7 @@ static u8 sgiioc4_read_status(ide_hwif_t *hwif) u8 reg = (u8) readb((void __iomem *) port); if ((port & 0xFFF) == 0x11C) { /* Status register of IOC4 */ - if (reg & 0x51) { /* Not busy...check for interrupt */ + if (!(reg & ATA_BUSY)) { /* Not busy... check for interrupt */ unsigned long other_ir = port - 0x110; unsigned int intr_reg = (u32) readl((void __iomem *) other_ir); @@ -339,35 +339,31 @@ ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d) if (dma_base == 0) return -1; - printk(KERN_INFO "%s: BM-DMA at 0x%04lx-0x%04lx\n", hwif->name, - dma_base, dma_base + num_ports - 1); + printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name); - if (!request_mem_region(dma_base, num_ports, hwif->name)) { - printk(KERN_ERR - "%s(%s) -- ERROR, Addresses 0x%p to 0x%p " - "ALREADY in use\n", - __func__, hwif->name, (void *) dma_base, - (void *) dma_base + num_ports - 1); + if (request_mem_region(dma_base, num_ports, hwif->name) == NULL) { + printk(KERN_ERR "%s(%s) -- ERROR: addresses 0x%08lx to 0x%08lx " + "already in use\n", __func__, hwif->name, + dma_base, dma_base + num_ports - 1); return -1; } virt_dma_base = ioremap(dma_base, num_ports); if (virt_dma_base == NULL) { - printk(KERN_ERR - "%s(%s) -- ERROR, Unable to map addresses 0x%lx to 0x%lx\n", - __func__, hwif->name, dma_base, dma_base + num_ports - 1); + printk(KERN_ERR "%s(%s) -- ERROR: unable to map addresses " + "0x%lx to 0x%lx\n", __func__, hwif->name, + dma_base, dma_base + num_ports - 1); goto dma_remap_failure; } hwif->dma_base = (unsigned long) virt_dma_base; - hwif->dmatable_cpu = pci_alloc_consistent(dev, - IOC4_PRD_ENTRIES * IOC4_PRD_BYTES, - &hwif->dmatable_dma); + hwif->sg_max_nents = IOC4_PRD_ENTRIES; - if (!hwif->dmatable_cpu) - goto dma_pci_alloc_failure; + hwif->prd_max_nents = IOC4_PRD_ENTRIES; + hwif->prd_ent_size = IOC4_PRD_BYTES; - hwif->sg_max_nents = IOC4_PRD_ENTRIES; + if (ide_allocate_dma_engine(hwif)) + goto dma_pci_alloc_failure; pad = pci_alloc_consistent(dev, IOC4_IDE_CACHELINE_SIZE, (dma_addr_t *)&hwif->extra_base); @@ -376,13 +372,11 @@ ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d) return 0; } - pci_free_consistent(dev, IOC4_PRD_ENTRIES * IOC4_PRD_BYTES, - hwif->dmatable_cpu, hwif->dmatable_dma); - printk(KERN_INFO - "%s() -- Error! Unable to allocate DMA Maps for drive %s\n", + ide_release_dma_engine(hwif); + + printk(KERN_ERR "%s(%s) -- ERROR: Unable to allocate DMA maps\n", __func__, hwif->name); - printk(KERN_INFO - "Changing from DMA to PIO mode for Drive %s\n", hwif->name); + printk(KERN_INFO "%s: changing from DMA to PIO mode", hwif->name); dma_pci_alloc_failure: iounmap(virt_dma_base); @@ -618,14 +612,12 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) irqport = (unsigned long) virt_base + IOC4_INTR_OFFSET; cmd_phys_base = bar0 + IOC4_CMD_OFFSET; - if (!request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE, - DRV_NAME)) { - printk(KERN_ERR - "%s %s: -- ERROR, Addresses " - "0x%p to 0x%p ALREADY in use\n", - DRV_NAME, pci_name(dev), (void *)cmd_phys_base, - (void *) cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE); - return -ENOMEM; + if (request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE, + DRV_NAME) == NULL) { + printk(KERN_ERR "%s %s -- ERROR: addresses 0x%08lx to 0x%08lx " + "already in use\n", DRV_NAME, pci_name(dev), + cmd_phys_base, cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE); + return -EBUSY; } /* Initialize the IO registers */ diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index db2b88a369a..eb4faf92c57 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -39,7 +39,6 @@ #include <linux/types.h> #include <linux/module.h> #include <linux/pci.h> -#include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> #include <linux/io.h> @@ -117,13 +116,14 @@ static inline unsigned long siimage_seldev(ide_drive_t *drive, int r) { ide_hwif_t *hwif = HWIF(drive); unsigned long base = (unsigned long)hwif->hwif_data; + u8 unit = drive->dn & 1; base += 0xA0 + r; if (hwif->host_flags & IDE_HFLAG_MMIO) base += hwif->channel << 6; else base += hwif->channel << 4; - base |= drive->select.b.unit << drive->select.b.unit; + base |= unit << unit; return base; } @@ -223,7 +223,9 @@ static u8 sil_pata_udma_filter(ide_drive_t *drive) static u8 sil_sata_udma_filter(ide_drive_t *drive) { - return strstr(drive->id->model, "Maxtor") ? ATA_UDMA5 : ATA_UDMA6; + char *m = (char *)&drive->id[ATA_ID_PROD]; + + return strstr(m, "Maxtor") ? ATA_UDMA5 : ATA_UDMA6; } /** @@ -243,7 +245,7 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio) ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); - ide_drive_t *pair = ide_get_paired_drive(drive); + ide_drive_t *pair = ide_get_pair_dev(drive); u32 speedt = 0; u16 speedp = 0; unsigned long addr = siimage_seldev(drive, 0x04); @@ -254,10 +256,10 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio) u8 addr_mask = hwif->channel ? (mmio ? 0xF4 : 0x84) : (mmio ? 0xB4 : 0x80); u8 mode = 0; - u8 unit = drive->select.b.unit; + u8 unit = drive->dn & 1; /* trim *taskfile* PIO to the slowest of the master/slave */ - if (pair->present) { + if (pair) { u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4); if (pair_pio < tf_pio) @@ -300,9 +302,9 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed) ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); - u16 ultra = 0, multi = 0; - u8 mode = 0, unit = drive->select.b.unit; unsigned long base = (unsigned long)hwif->hwif_data; + u16 ultra = 0, multi = 0; + u8 mode = 0, unit = drive->dn & 1; u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; u8 scsc = 0, addr_mask = hwif->channel ? (mmio ? 0xF4 : 0x84) : (mmio ? 0xB4 : 0x80); @@ -462,7 +464,7 @@ static void sil_sata_pre_reset(ide_drive_t *drive) * to 133 MHz clocking if the system isn't already set up to do it. */ -static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev) +static unsigned int init_chipset_siimage(struct pci_dev *dev) { struct ide_host *host = pci_get_drvdata(dev); void __iomem *ioaddr = host->host_priv; @@ -616,8 +618,8 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif) static int is_dev_seagate_sata(ide_drive_t *drive) { - const char *s = &drive->id->model[0]; - unsigned len = strnlen(s, sizeof(drive->id->model)); + const char *s = (const char *)&drive->id[ATA_ID_PROD]; + unsigned len = strnlen(s, ATA_ID_PROD_LEN); if ((len > 4) && (!memcmp(s, "ST", 2))) if ((!memcmp(s + len - 2, "AS", 2)) || @@ -711,7 +713,7 @@ static const struct ide_dma_ops sil_dma_ops = { .dma_setup = ide_dma_setup, .dma_exec_cmd = ide_dma_exec_cmd, .dma_start = ide_dma_start, - .dma_end = __ide_dma_end, + .dma_end = ide_dma_end, .dma_test_irq = siimage_dma_test_irq, .dma_timeout = ide_dma_timeout, .dma_lost_irq = ide_dma_lost_irq, @@ -828,21 +830,23 @@ static const struct pci_device_id siimage_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, siimage_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver siimage_pci_driver = { .name = "SiI_IDE", .id_table = siimage_pci_tbl, .probe = siimage_init_one, .remove = __devexit_p(siimage_remove), + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, }; static int __init siimage_ide_init(void) { - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&siimage_pci_driver); } static void __exit siimage_ide_exit(void) { - pci_unregister_driver(&driver); + pci_unregister_driver(&siimage_pci_driver); } module_init(siimage_ide_init); diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index 5efe21d6ef9..ad32e18c5ba 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -47,7 +47,6 @@ #include <linux/types.h> #include <linux/module.h> #include <linux/kernel.h> -#include <linux/hdreg.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/ide.h> @@ -448,7 +447,7 @@ static int __devinit sis_find_family(struct pci_dev *dev) return chipset_family; } -static unsigned int __devinit init_chipset_sis5513(struct pci_dev *dev) +static unsigned int init_chipset_sis5513(struct pci_dev *dev) { /* Make general config ops here 1/ tell IDE channels to operate in Compatibility mode only @@ -606,21 +605,23 @@ static const struct pci_device_id sis5513_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, sis5513_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver sis5513_pci_driver = { .name = "SIS_IDE", .id_table = sis5513_pci_tbl, .probe = sis5513_init_one, .remove = __devexit_p(sis5513_remove), + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, }; static int __init sis5513_ide_init(void) { - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&sis5513_pci_driver); } static void __exit sis5513_ide_exit(void) { - pci_unregister_driver(&driver); + pci_unregister_driver(&sis5513_pci_driver); } module_init(sis5513_ide_init); diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c index 73905bcc08f..84dc33602ff 100644 --- a/drivers/ide/pci/sl82c105.c +++ b/drivers/ide/pci/sl82c105.c @@ -17,7 +17,6 @@ #include <linux/types.h> #include <linux/module.h> #include <linux/kernel.h> -#include <linux/hdreg.h> #include <linux/pci.h> #include <linux/ide.h> @@ -62,7 +61,7 @@ static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio) if (cmd_off == 0) cmd_off = 1; - if (pio > 2 || ide_dev_has_iordy(drive->id)) + if (pio > 2 || ata_id_has_iordy(drive->id)) iordy = 0x40; return (cmd_on - 1) << 8 | (cmd_off - 1) | iordy; @@ -208,7 +207,7 @@ static int sl82c105_dma_end(ide_drive_t *drive) DBG(("%s(drive:%s)\n", __func__, drive->name)); - ret = __ide_dma_end(drive); + ret = ide_dma_end(drive); pci_write_config_word(dev, reg, drive->drive_data); @@ -272,7 +271,7 @@ static u8 sl82c105_bridge_revision(struct pci_dev *dev) * channel 0 here at least, but channel 1 has to be enabled by * firmware or arch code. We still set both to 16 bits mode. */ -static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev) +static unsigned int init_chipset_sl82c105(struct pci_dev *dev) { u32 val; @@ -346,21 +345,23 @@ static const struct pci_device_id sl82c105_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, sl82c105_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver sl82c105_pci_driver = { .name = "W82C105_IDE", .id_table = sl82c105_pci_tbl, .probe = sl82c105_init_one, .remove = ide_pci_remove, + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, }; static int __init sl82c105_ide_init(void) { - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&sl82c105_pci_driver); } static void __exit sl82c105_ide_exit(void) { - pci_unregister_driver(&driver); + pci_unregister_driver(&sl82c105_pci_driver); } module_init(sl82c105_ide_init); diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c index 866d6c65e3a..0f759e4ed77 100644 --- a/drivers/ide/pci/slc90e66.c +++ b/drivers/ide/pci/slc90e66.c @@ -11,7 +11,6 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/pci.h> -#include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> @@ -155,21 +154,23 @@ static const struct pci_device_id slc90e66_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, slc90e66_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver slc90e66_pci_driver = { .name = "SLC90e66_IDE", .id_table = slc90e66_pci_tbl, .probe = slc90e66_init_one, .remove = ide_pci_remove, + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, }; static int __init slc90e66_ide_init(void) { - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&slc90e66_pci_driver); } static void __exit slc90e66_ide_exit(void) { - pci_unregister_driver(&driver); + pci_unregister_driver(&slc90e66_pci_driver); } module_init(slc90e66_ide_init); diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c index 927277c54ec..93e2cce4b29 100644 --- a/drivers/ide/pci/tc86c001.c +++ b/drivers/ide/pci/tc86c001.c @@ -186,7 +186,7 @@ static const struct ide_dma_ops tc86c001_dma_ops = { .dma_setup = ide_dma_setup, .dma_exec_cmd = ide_dma_exec_cmd, .dma_start = tc86c001_dma_start, - .dma_end = __ide_dma_end, + .dma_end = ide_dma_end, .dma_test_irq = ide_dma_test_irq, .dma_lost_irq = ide_dma_lost_irq, .dma_timeout = ide_dma_timeout, @@ -245,7 +245,7 @@ static const struct pci_device_id tc86c001_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, tc86c001_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver tc86c001_pci_driver = { .name = "TC86C001", .id_table = tc86c001_pci_tbl, .probe = tc86c001_init_one, @@ -254,12 +254,12 @@ static struct pci_driver driver = { static int __init tc86c001_ide_init(void) { - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&tc86c001_pci_driver); } static void __exit tc86c001_ide_exit(void) { - pci_unregister_driver(&driver); + pci_unregister_driver(&tc86c001_pci_driver); } module_init(tc86c001_ide_init); diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c index b77ec35151b..b6ff40336aa 100644 --- a/drivers/ide/pci/triflex.c +++ b/drivers/ide/pci/triflex.c @@ -28,7 +28,6 @@ #include <linux/types.h> #include <linux/module.h> #include <linux/kernel.h> -#include <linux/hdreg.h> #include <linux/pci.h> #include <linux/ide.h> #include <linux/init.h> @@ -39,13 +38,12 @@ static void triflex_set_mode(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 channel_offset = hwif->channel ? 0x74 : 0x70; - u16 timing = 0; u32 triflex_timings = 0; - u8 unit = (drive->select.b.unit & 0x01); - + u16 timing = 0; + u8 channel_offset = hwif->channel ? 0x74 : 0x70, unit = drive->dn & 1; + pci_read_config_dword(dev, channel_offset, &triflex_timings); - + switch(speed) { case XFER_MW_DMA_2: timing = 0x0103; @@ -115,21 +113,23 @@ static const struct pci_device_id triflex_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, triflex_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver triflex_pci_driver = { .name = "TRIFLEX_IDE", .id_table = triflex_pci_tbl, .probe = triflex_init_one, .remove = ide_pci_remove, + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, }; static int __init triflex_ide_init(void) { - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&triflex_pci_driver); } static void __exit triflex_ide_exit(void) { - pci_unregister_driver(&driver); + pci_unregister_driver(&triflex_pci_driver); } module_init(triflex_ide_init); diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c index fd28b49977f..75ea6152656 100644 --- a/drivers/ide/pci/trm290.c +++ b/drivers/ide/pci/trm290.c @@ -135,7 +135,6 @@ #include <linux/interrupt.h> #include <linux/blkdev.h> #include <linux/init.h> -#include <linux/hdreg.h> #include <linux/pci.h> #include <linux/ide.h> @@ -162,7 +161,7 @@ static void trm290_prepare_drive (ide_drive_t *drive, unsigned int use_dma) } /* enable IRQ if not probing */ - if (drive->present) { + if (drive->dev_flags & IDE_DFLAG_PRESENT) { reg = inw(hwif->config_data + 3); reg &= 0x13; reg &= ~(1 << hwif->channel); @@ -174,7 +173,7 @@ static void trm290_prepare_drive (ide_drive_t *drive, unsigned int use_dma) static void trm290_selectproc (ide_drive_t *drive) { - trm290_prepare_drive(drive, drive->using_dma); + trm290_prepare_drive(drive, !!(drive->dev_flags & IDE_DFLAG_USING_DMA)); } static void trm290_dma_exec_cmd(ide_drive_t *drive, u8 command) @@ -351,7 +350,7 @@ static const struct pci_device_id trm290_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, trm290_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver trm290_pci_driver = { .name = "TRM290_IDE", .id_table = trm290_pci_tbl, .probe = trm290_init_one, @@ -360,12 +359,12 @@ static struct pci_driver driver = { static int __init trm290_ide_init(void) { - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&trm290_pci_driver); } static void __exit trm290_ide_exit(void) { - pci_unregister_driver(&driver); + pci_unregister_driver(&trm290_pci_driver); } module_init(trm290_ide_init); diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index 94fb9ab3223..2a812d3207e 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -154,7 +154,7 @@ static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing) static void via_set_drive(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = drive->hwif; - ide_drive_t *peer = hwif->drives + (~drive->dn & 1); + ide_drive_t *peer = ide_get_pair_dev(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); struct ide_host *host = pci_get_drvdata(dev); struct via82cxxx_dev *vdev = host->host_priv; @@ -173,7 +173,7 @@ static void via_set_drive(ide_drive_t *drive, const u8 speed) ide_timing_compute(drive, speed, &t, T, UT); - if (peer->present) { + if (peer) { ide_timing_compute(peer, peer->current_speed, &p, T, UT); ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT); } @@ -215,7 +215,7 @@ static struct via_isa_bridge *via_config_find(struct pci_dev **isa) /* * Check and handle 80-wire cable presence */ -static void __devinit via_cable_detect(struct via82cxxx_dev *vdev, u32 u) +static void via_cable_detect(struct via82cxxx_dev *vdev, u32 u) { int i; @@ -267,7 +267,7 @@ static void __devinit via_cable_detect(struct via82cxxx_dev *vdev, u32 u) * and initialize its drive independent registers. */ -static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev) +static unsigned int init_chipset_via82cxxx(struct pci_dev *dev) { struct ide_host *host = pci_get_drvdata(dev); struct via82cxxx_dev *vdev = host->host_priv; @@ -487,21 +487,23 @@ static const struct pci_device_id via_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, via_pci_tbl); -static struct pci_driver driver = { +static struct pci_driver via_pci_driver = { .name = "VIA_IDE", .id_table = via_pci_tbl, .probe = via_init_one, .remove = __devexit_p(via_remove), + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, }; static int __init via_ide_init(void) { - return ide_pci_register_driver(&driver); + return ide_pci_register_driver(&via_pci_driver); } static void __exit via_ide_exit(void) { - pci_unregister_driver(&driver); + pci_unregister_driver(&via_pci_driver); } module_init(via_ide_init); diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index fa2be26272d..2e19d629853 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -430,10 +430,7 @@ pmac_ide_selectproc(ide_drive_t *drive) pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); - if (pmif == NULL) - return; - - if (drive->select.b.unit & 0x01) + if (drive->dn & 1) writel(pmif->timings[1], PMAC_IDE_REG(IDE_TIMING_CONFIG)); else writel(pmif->timings[0], PMAC_IDE_REG(IDE_TIMING_CONFIG)); @@ -452,10 +449,7 @@ pmac_ide_kauai_selectproc(ide_drive_t *drive) pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); - if (pmif == NULL) - return; - - if (drive->select.b.unit & 0x01) { + if (drive->dn & 1) { writel(pmif->timings[1], PMAC_IDE_REG(IDE_KAUAI_PIO_CONFIG)); writel(pmif->timings[3], PMAC_IDE_REG(IDE_KAUAI_ULTRA_CONFIG)); } else { @@ -475,9 +469,6 @@ pmac_ide_do_update_timings(ide_drive_t *drive) pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); - if (pmif == NULL) - return; - if (pmif->kind == controller_sh_ata6 || pmif->kind == controller_un_ata6 || pmif->kind == controller_k2_ata6) @@ -524,11 +515,8 @@ pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) unsigned accessTime, recTime; unsigned int cycle_time; - if (pmif == NULL) - return; - /* which drive is it ? */ - timings = &pmif->timings[drive->select.b.unit & 0x01]; + timings = &pmif->timings[drive->dn & 1]; t = *timings; cycle_time = ide_pio_cycle_time(drive, pio); @@ -669,9 +657,9 @@ static void set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2, u8 speed) { + u16 *id = drive->id; int cycleTime, accessTime = 0, recTime = 0; unsigned accessTicks, recTicks; - struct hd_driveid *id = drive->id; struct mdma_timings_t* tm = NULL; int i; @@ -686,8 +674,8 @@ set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2, } /* Check if drive provides explicit DMA cycle time */ - if ((id->field_valid & 2) && id->eide_dma_time) - cycleTime = max_t(int, id->eide_dma_time, cycleTime); + if ((id[ATA_ID_FIELD_VALID] & 2) && id[ATA_ID_EIDE_DMA_TIME]) + cycleTime = max_t(int, id[ATA_ID_EIDE_DMA_TIME], cycleTime); /* OHare limits according to some old Apple sources */ if ((intf_type == controller_ohare) && (cycleTime < 150)) @@ -805,9 +793,9 @@ static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed) ide_hwif_t *hwif = drive->hwif; pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); - int unit = (drive->select.b.unit & 0x01); int ret = 0; u32 *timings, *timings2, tl[2]; + u8 unit = drive->dn & 1; timings = &pmif->timings[unit]; timings2 = &pmif->timings[unit+2]; @@ -966,11 +954,11 @@ static void pmac_ide_init_dev(ide_drive_t *drive) if (pmif->mediabay) { #ifdef CONFIG_PMAC_MEDIABAY if (check_media_bay_by_base(pmif->regbase, MB_CD) == 0) { - drive->noprobe = 0; + drive->dev_flags &= ~IDE_DFLAG_NOPROBE; return; } #endif - drive->noprobe = 1; + drive->dev_flags |= IDE_DFLAG_NOPROBE; } } @@ -1535,18 +1523,6 @@ use_pio_instead: return 0; /* revert to PIO for this request */ } -/* Teardown mappings after DMA has completed. */ -static void -pmac_ide_destroy_dmatable (ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - - if (hwif->sg_nents) { - ide_destroy_dmatable(drive); - hwif->sg_nents = 0; - } -} - /* * Prepare a DMA transfer. We build the DMA table, adjust the timings for * a read on KeyLargo ATA/66 and mark us as waiting for DMA completion @@ -1558,12 +1534,7 @@ pmac_ide_dma_setup(ide_drive_t *drive) pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); struct request *rq = HWGROUP(drive)->rq; - u8 unit = (drive->select.b.unit & 0x01); - u8 ata4; - - if (pmif == NULL) - return 1; - ata4 = (pmif->kind == controller_kl_ata4); + u8 unit = drive->dn & 1, ata4 = (pmif->kind == controller_kl_ata4); if (!pmac_ide_build_dmatable(drive, rq)) { ide_map_sg(drive, rq); @@ -1617,17 +1588,15 @@ pmac_ide_dma_end (ide_drive_t *drive) ide_hwif_t *hwif = drive->hwif; pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); - volatile struct dbdma_regs __iomem *dma; + volatile struct dbdma_regs __iomem *dma = pmif->dma_regs; u32 dstat; - - if (pmif == NULL) - return 0; - dma = pmif->dma_regs; drive->waiting_for_dma = 0; dstat = readl(&dma->status); writel(((RUN|WAKE|DEAD) << 16), &dma->control); - pmac_ide_destroy_dmatable(drive); + + ide_destroy_dmatable(drive); + /* verify good dma status. we don't check for ACTIVE beeing 0. We should... * in theory, but with ATAPI decices doing buffer underruns, that would * cause us to disable DMA, which isn't what we want @@ -1647,13 +1616,9 @@ pmac_ide_dma_test_irq (ide_drive_t *drive) ide_hwif_t *hwif = drive->hwif; pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); - volatile struct dbdma_regs __iomem *dma; + volatile struct dbdma_regs __iomem *dma = pmif->dma_regs; unsigned long status, timeout; - if (pmif == NULL) - return 0; - dma = pmif->dma_regs; - /* We have to things to deal with here: * * - The dbdma won't stop if the command was started @@ -1672,9 +1637,6 @@ pmac_ide_dma_test_irq (ide_drive_t *drive) status = readl(&dma->status); if (!(status & ACTIVE)) return 1; - if (!drive->waiting_for_dma) - printk(KERN_WARNING "ide%d, ide_dma_test_irq \ - called while not waiting\n", HWIF(drive)->index); /* If dbdma didn't execute the STOP command yet, the * active bit is still set. We consider that we aren't @@ -1709,14 +1671,9 @@ pmac_ide_dma_lost_irq (ide_drive_t *drive) ide_hwif_t *hwif = drive->hwif; pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); - volatile struct dbdma_regs __iomem *dma; - unsigned long status; - - if (pmif == NULL) - return; - dma = pmif->dma_regs; + volatile struct dbdma_regs __iomem *dma = pmif->dma_regs; + unsigned long status = readl(&dma->status); - status = readl(&dma->status); printk(KERN_ERR "ide-pmac lost interrupt, dma status: %lx\n", status); } diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index a8e9e8a69a5..9f1f9163a13 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -659,3 +659,36 @@ void ide_pci_remove(struct pci_dev *dev) pci_disable_device(dev); } EXPORT_SYMBOL_GPL(ide_pci_remove); + +#ifdef CONFIG_PM +int ide_pci_suspend(struct pci_dev *dev, pm_message_t state) +{ + pci_save_state(dev); + pci_disable_device(dev); + pci_set_power_state(dev, pci_choose_state(dev, state)); + + return 0; +} +EXPORT_SYMBOL_GPL(ide_pci_suspend); + +int ide_pci_resume(struct pci_dev *dev) +{ + struct ide_host *host = pci_get_drvdata(dev); + int rc; + + pci_set_power_state(dev, PCI_D0); + + rc = pci_enable_device(dev); + if (rc) + return rc; + + pci_restore_state(dev); + pci_set_master(dev); + + if (host->init_chipset) + host->init_chipset(dev); + + return 0; +} +EXPORT_SYMBOL_GPL(ide_pci_resume); +#endif |