aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide')
-rw-r--r--drivers/ide/Kconfig47
-rw-r--r--drivers/ide/Makefile2
-rw-r--r--drivers/ide/cris/ide-cris.c7
-rw-r--r--drivers/ide/ide-dma.c1
-rw-r--r--drivers/ide/ide-iops.c13
-rw-r--r--drivers/ide/ide-probe.c32
-rw-r--r--drivers/ide/legacy/ali14xx.c7
-rw-r--r--drivers/ide/legacy/macide.c2
-rw-r--r--drivers/ide/legacy/q40ide.c2
-rw-r--r--drivers/ide/pci/aec62xx.c11
-rw-r--r--drivers/ide/pci/alim15x3.c5
-rw-r--r--drivers/ide/pci/piix.c1
-rw-r--r--drivers/ide/pci/siimage.c45
-rw-r--r--drivers/ide/pci/sis5513.c1
-rw-r--r--drivers/ide/pci/trm290.c3
-rw-r--r--drivers/ide/ppc/pmac.c2
16 files changed, 104 insertions, 77 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index e445fe6e4ba..45b22282f14 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -313,7 +313,6 @@ comment "IDE chipset support/bugfixes"
config IDE_GENERIC
tristate "generic/default IDE chipset support"
- default H8300
help
If unsure, say N.
@@ -484,6 +483,7 @@ config WDC_ALI15X3
config BLK_DEV_AMD74XX
tristate "AMD and nVidia IDE support"
+ depends on !ARM
select BLK_DEV_IDEDMA_PCI
help
This driver adds explicit support for AMD-7xx and AMD-8111 chips
@@ -883,6 +883,49 @@ config BLK_DEV_IDE_BAST
Say Y here if you want to support the onboard IDE channels on the
Simtec BAST or the Thorcom VR1000
+config ETRAX_IDE
+ bool "ETRAX IDE support"
+ depends on CRIS && BROKEN
+ select BLK_DEV_IDEDMA
+ select IDE_GENERIC
+ help
+ Enables the ETRAX IDE driver.
+
+ You can't use parallel ports or SCSI ports at the same time.
+
+config ETRAX_IDE_DELAY
+ int "Delay for drives to regain consciousness"
+ depends on ETRAX_IDE && ETRAX_ARCH_V10
+ default 15
+ help
+ Number of seconds to wait for IDE drives to spin up after an IDE
+ reset.
+
+choice
+ prompt "IDE reset pin"
+ depends on ETRAX_IDE && ETRAX_ARCH_V10
+ default ETRAX_IDE_PB7_RESET
+
+config ETRAX_IDE_PB7_RESET
+ bool "Port_PB_Bit_7"
+ help
+ IDE reset on pin 7 on port B
+
+config ETRAX_IDE_G27_RESET
+ bool "Port_G_Bit_27"
+ help
+ IDE reset on pin 27 on port G
+
+endchoice
+
+config IDE_H8300
+ bool "H8300 IDE support"
+ depends on H8300
+ select IDE_GENERIC
+ default y
+ help
+ Enables the H8300 IDE driver.
+
config BLK_DEV_GAYLE
bool "Amiga Gayle IDE interface support"
depends on AMIGA
@@ -963,7 +1006,7 @@ config BLK_DEV_Q40IDE
config BLK_DEV_MPC8xx_IDE
bool "MPC8xx IDE support"
- depends on 8xx && IDE=y && BLK_DEV_IDE=y && !PPC_MERGE
+ depends on 8xx && (LWMON || IVMS8 || IVML24 || TQM8xxL) && IDE=y && BLK_DEV_IDE=y && !PPC_MERGE
select IDE_GENERIC
help
This option provides support for IDE on Motorola MPC8xx Systems.
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index 75dc6969e0a..b181fc67205 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -39,7 +39,7 @@ ide-core-$(CONFIG_BLK_DEV_MPC8xx_IDE) += ppc/mpc8xx.o
ide-core-$(CONFIG_BLK_DEV_IDE_PMAC) += ppc/pmac.o
# built-in only drivers from h8300/
-ide-core-$(CONFIG_H8300) += h8300/ide-h8300.o
+ide-core-$(CONFIG_IDE_H8300) += h8300/ide-h8300.o
obj-$(CONFIG_BLK_DEV_IDE) += ide-core.o
obj-$(CONFIG_IDE_GENERIC) += ide-generic.o
diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c
index 7f5bc2ee6c7..476e0d65ed4 100644
--- a/drivers/ide/cris/ide-cris.c
+++ b/drivers/ide/cris/ide-cris.c
@@ -773,15 +773,16 @@ init_e100_ide (void)
/* the IDE control register is at ATA address 6, with CS1 active instead of CS0 */
ide_offsets[IDE_CONTROL_OFFSET] = cris_ide_reg_addr(6, 1, 0);
- /* first fill in some stuff in the ide_hwifs fields */
+ for (h = 0; h < 4; h++) {
+ ide_hwif_t *hwif = NULL;
- for(h = 0; h < MAX_HWIFS; h++) {
- ide_hwif_t *hwif = &ide_hwifs[h];
ide_setup_ports(&hw, cris_ide_base_address(h),
ide_offsets,
0, 0, cris_ide_ack_intr,
ide_default_irq(0));
ide_register_hw(&hw, NULL, 1, &hwif);
+ if (hwif == NULL)
+ continue;
hwif->mmio = 1;
hwif->chipset = ide_etrax100;
hwif->set_pio_mode = &cris_set_pio_mode;
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index e3add70b9cd..0d795a1678c 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -130,6 +130,7 @@ static const struct drive_list_entry drive_blacklist [] = {
{ "_NEC DV5800A", NULL },
{ "SAMSUNG CD-ROM SN-124", "N001" },
{ "Seagate STT20000A", NULL },
+ { "CD-ROM CDR_U200", "1.09" },
{ NULL , NULL }
};
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index e17a9ee120e..5c3256180ae 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -303,9 +303,6 @@ void default_hwif_transport(ide_hwif_t *hwif)
hwif->atapi_output_bytes = atapi_output_bytes;
}
-/*
- * Beginning of Taskfile OPCODE Library and feature sets.
- */
void ide_fix_driveid (struct hd_driveid *id)
{
#ifndef __LITTLE_ENDIAN
@@ -592,6 +589,9 @@ EXPORT_SYMBOL_GPL(ide_in_drive_list);
static const struct drive_list_entry ivb_list[] = {
{ "QUANTUM FIREBALLlct10 05" , "A03.0900" },
{ "TSSTcorp CDDVDW SH-S202J" , "SB00" },
+ { "TSSTcorp CDDVDW SH-S202J" , "SB01" },
+ { "TSSTcorp CDDVDW SH-S202N" , "SB00" },
+ { "TSSTcorp CDDVDW SH-S202N" , "SB01" },
{ NULL , NULL }
};
@@ -756,7 +756,7 @@ int ide_driveid_update(ide_drive_t *drive)
int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
{
ide_hwif_t *hwif = drive->hwif;
- int error;
+ int error = 0;
u8 stat;
// while (HWGROUP(drive)->busy)
@@ -767,6 +767,10 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
hwif->dma_host_off(drive);
#endif
+ /* Skip setting PIO flow-control modes on pre-EIDE drives */
+ if ((speed & 0xf8) == XFER_PIO_0 && !(drive->id->capability & 0x08))
+ goto skip;
+
/*
* Don't use ide_wait_cmd here - it will
* attempt to set_geometry and recalibrate,
@@ -814,6 +818,7 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
drive->id->dma_mword &= ~0x0F00;
drive->id->dma_1word &= ~0x0F00;
+ skip:
#ifdef CONFIG_BLK_DEV_IDEDMA
if (speed >= XFER_SW_DMA_0)
hwif->dma_host_on(drive);
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 56fb0b84342..ee848c70599 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -644,7 +644,7 @@ static void hwif_register (ide_hwif_t *hwif)
static int wait_hwif_ready(ide_hwif_t *hwif)
{
- int rc;
+ int unit, rc;
printk(KERN_DEBUG "Probing IDE interface %s...\n", hwif->name);
@@ -661,20 +661,26 @@ static int wait_hwif_ready(ide_hwif_t *hwif)
return rc;
/* Now make sure both master & slave are ready */
- SELECT_DRIVE(&hwif->drives[0]);
- hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]);
- mdelay(2);
- rc = ide_wait_not_busy(hwif, 35000);
- if (rc)
- return rc;
- SELECT_DRIVE(&hwif->drives[1]);
- hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]);
- mdelay(2);
- rc = ide_wait_not_busy(hwif, 35000);
+ for (unit = 0; unit < MAX_DRIVES; unit++) {
+ ide_drive_t *drive = &hwif->drives[unit];
+ /* Ignore disks that we will not probe for later. */
+ if (!drive->noprobe || drive->present) {
+ SELECT_DRIVE(drive);
+ hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]);
+ mdelay(2);
+ rc = ide_wait_not_busy(hwif, 35000);
+ if (rc)
+ goto out;
+ } else
+ printk(KERN_DEBUG "%s: ide_wait_not_busy() skipped\n",
+ drive->name);
+ }
+out:
/* Exit function with master reselected (let's be sane) */
- SELECT_DRIVE(&hwif->drives[0]);
-
+ if (unit)
+ SELECT_DRIVE(&hwif->drives[0]);
+
return rc;
}
diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c
index 10311ecc674..38c3a6d63f3 100644
--- a/drivers/ide/legacy/ali14xx.c
+++ b/drivers/ide/legacy/ali14xx.c
@@ -53,12 +53,13 @@
/* port addresses for auto-detection */
#define ALI_NUM_PORTS 4
-static int ports[ALI_NUM_PORTS] __initdata = {0x074, 0x0f4, 0x034, 0x0e4};
+static const int ports[ALI_NUM_PORTS] __initdata =
+ { 0x074, 0x0f4, 0x034, 0x0e4 };
/* register initialization data */
typedef struct { u8 reg, data; } RegInitializer;
-static RegInitializer initData[] __initdata = {
+static const RegInitializer initData[] __initdata = {
{0x01, 0x0f}, {0x02, 0x00}, {0x03, 0x00}, {0x04, 0x00},
{0x05, 0x00}, {0x06, 0x00}, {0x07, 0x2b}, {0x0a, 0x0f},
{0x25, 0x00}, {0x26, 0x00}, {0x27, 0x00}, {0x28, 0x00},
@@ -177,7 +178,7 @@ static int __init findPort (void)
* Initialize controller registers with default values.
*/
static int __init initRegisters (void) {
- RegInitializer *p;
+ const RegInitializer *p;
u8 t;
unsigned long flags;
diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c
index e87cd2f1643..5c6aa77c237 100644
--- a/drivers/ide/legacy/macide.c
+++ b/drivers/ide/legacy/macide.c
@@ -81,7 +81,7 @@ int macide_ack_intr(ide_hwif_t* hwif)
* Probe for a Macintosh IDE interface
*/
-void macide_init(void)
+void __init macide_init(void)
{
hw_regs_t hw;
ide_hwif_t *hwif;
diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c
index a73db1bd482..6ea46a6723e 100644
--- a/drivers/ide/legacy/q40ide.c
+++ b/drivers/ide/legacy/q40ide.c
@@ -111,7 +111,7 @@ static const char *q40_ide_names[Q40IDE_NUM_HWIFS]={
* Probe for Q40 IDE interfaces
*/
-void q40ide_init(void)
+void __init q40ide_init(void)
{
int i;
ide_hwif_t *hwif;
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index 19ec421f7b9..44268504ae4 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -260,6 +260,11 @@ static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_devi
{
struct ide_port_info d;
u8 idx = id->driver_data;
+ int err;
+
+ err = pci_enable_device(dev);
+ if (err)
+ return err;
d = aec62xx_chipsets[idx];
@@ -272,7 +277,11 @@ static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_devi
}
}
- return ide_setup_pci_device(dev, &d);
+ err = ide_setup_pci_device(dev, &d);
+ if (err)
+ pci_disable_device(dev);
+
+ return err;
}
static const struct pci_device_id aec62xx_pci_tbl[] = {
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index a607dd31a64..ce293936af4 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -603,6 +603,11 @@ static int ali_cable_override(struct pci_dev *pdev)
pdev->subsystem_device == 0x10AF)
return 1;
+ /* Mitac 8317 (Winbook-A) and relatives */
+ if (pdev->subsystem_vendor == 0x1071 &&
+ pdev->subsystem_device == 0x8317)
+ return 1;
+
/* Systems by DMI */
if (dmi_check_system(cable_dmi_table))
return 1;
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index 63625a0be71..27781d294ce 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -306,6 +306,7 @@ static const struct ich_laptop ich_laptop[] = {
{ 0x27DF, 0x0005, 0x0280 }, /* ICH7 on Acer 5602WLMi */
{ 0x27DF, 0x1025, 0x0110 }, /* ICH7 on Acer 3682WLMi */
{ 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */
+ { 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */
{ 0x24CA, 0x1025, 0x0061 }, /* ICH4 on Acer Aspire 2023WLMi */
/* end marker */
{ 0, }
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 6d99441c605..5709c252543 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/pci/siimage.c Version 1.18 Oct 18 2007
+ * linux/drivers/ide/pci/siimage.c Version 1.19 Nov 16 2007
*
* Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2003 Red Hat <alan@redhat.com>
@@ -460,48 +460,6 @@ static void sil_sata_pre_reset(ide_drive_t *drive)
}
/**
- * siimage_reset - reset a device on an siimage controller
- * @drive: drive to reset
- *
- * Perform a controller level reset fo the device. For
- * SATA we must also check the PHY.
- */
-
-static void siimage_reset (ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- u8 reset = 0;
- unsigned long addr = siimage_selreg(hwif, 0);
-
- if (hwif->mmio) {
- reset = hwif->INB(addr);
- hwif->OUTB((reset|0x03), addr);
- /* FIXME:posting */
- udelay(25);
- hwif->OUTB(reset, addr);
- (void) hwif->INB(addr);
- } else {
- pci_read_config_byte(hwif->pci_dev, addr, &reset);
- pci_write_config_byte(hwif->pci_dev, addr, reset|0x03);
- udelay(25);
- pci_write_config_byte(hwif->pci_dev, addr, reset);
- pci_read_config_byte(hwif->pci_dev, addr, &reset);
- }
-
- if (SATA_STATUS_REG) {
- /* SATA_STATUS_REG is valid only when in MMIO mode */
- u32 sata_stat = readl((void __iomem *)SATA_STATUS_REG);
- printk(KERN_WARNING "%s: reset phy, status=0x%08x, %s\n",
- hwif->name, sata_stat, __FUNCTION__);
- if (!(sata_stat)) {
- printk(KERN_WARNING "%s: reset phy dead, status=0x%08x\n",
- hwif->name, sata_stat);
- drive->failures++;
- }
- }
-}
-
-/**
* proc_reports_siimage - add siimage controller to proc
* @dev: PCI device
* @clocking: SCSC value
@@ -857,7 +815,6 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif)
{
u8 sata = is_sata(hwif);
- hwif->resetproc = &siimage_reset;
hwif->set_pio_mode = &sil_set_pio_mode;
hwif->set_dma_mode = &sil_set_dma_mode;
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index f6e2ab3dd16..d90b4291777 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -526,6 +526,7 @@ static const struct sis_laptop sis_laptop[] = {
/* devid, subvendor, subdev */
{ 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */
{ 0x5513, 0x1734, 0x105f }, /* FSC Amilo A1630 */
+ { 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */
/* end marker */
{ 0, }
};
diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c
index 5011ba22e36..0895e753a35 100644
--- a/drivers/ide/pci/trm290.c
+++ b/drivers/ide/pci/trm290.c
@@ -240,9 +240,6 @@ static int trm290_ide_dma_test_irq (ide_drive_t *drive)
return (status == 0x00ff);
}
-/*
- * Invoked from ide-dma.c at boot time.
- */
static void __devinit init_hwif_trm290(ide_hwif_t *hwif)
{
unsigned int cfgbase = 0;
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 5afdfef7264..7f7a5988577 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1513,7 +1513,7 @@ pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq)
if (pmif->broken_dma && cur_addr & (L1_CACHE_BYTES - 1)) {
if (pmif->broken_dma_warn == 0) {
- printk(KERN_WARNING "%s: DMA on non aligned address,"
+ printk(KERN_WARNING "%s: DMA on non aligned address, "
"switching to PIO on Ohare chipset\n", drive->name);
pmif->broken_dma_warn = 1;
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 11:18:10 +0000