diff options
Diffstat (limited to 'drivers/ide')
39 files changed, 744 insertions, 922 deletions
diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c index 66f826252ae..444a0b84f5b 100644 --- a/drivers/ide/arm/icside.c +++ b/drivers/ide/arm/icside.c @@ -448,23 +448,21 @@ static int icside_dma_test_irq(ide_drive_t *drive) ICS_ARCIN_V6_INTRSTAT_1)) & 1; } -static int icside_dma_timeout(ide_drive_t *drive) +static void icside_dma_timeout(ide_drive_t *drive) { printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name); if (icside_dma_test_irq(drive)) - return 0; + return; - ide_dump_status(drive, "DMA timeout", - HWIF(drive)->INB(IDE_STATUS_REG)); + ide_dump_status(drive, "DMA timeout", HWIF(drive)->INB(IDE_STATUS_REG)); - return icside_dma_end(drive); + icside_dma_end(drive); } -static int icside_dma_lostirq(ide_drive_t *drive) +static void icside_dma_lost_irq(ide_drive_t *drive) { printk(KERN_ERR "%s: IRQ lost\n", drive->name); - return 1; } static void icside_dma_init(ide_hwif_t *hwif) @@ -490,8 +488,8 @@ static void icside_dma_init(ide_hwif_t *hwif) hwif->dma_start = icside_dma_start; hwif->ide_dma_end = icside_dma_end; hwif->ide_dma_test_irq = icside_dma_test_irq; - hwif->ide_dma_timeout = icside_dma_timeout; - hwif->ide_dma_lostirq = icside_dma_lostirq; + hwif->dma_timeout = icside_dma_timeout; + hwif->dma_lost_irq = icside_dma_lost_irq; hwif->drives[0].autodma = hwif->autodma; hwif->drives[1].autodma = hwif->autodma; diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c index ca0341c05e5..886091bc7db 100644 --- a/drivers/ide/cris/ide-cris.c +++ b/drivers/ide/cris/ide-cris.c @@ -819,7 +819,7 @@ init_e100_ide (void) hwif->dma_host_off = &cris_dma_off; hwif->dma_host_on = &cris_dma_on; hwif->dma_off_quietly = &cris_dma_off; - hwif->udma_four = 0; + hwif->cbl = ATA_CBL_PATA40; hwif->ultra_mask = cris_ultra_mask; hwif->mwdma_mask = 0x07; /* Multiword DMA 0-2 */ hwif->autodma = 1; diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 252ab8295ed..1486eb212cc 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -481,7 +481,7 @@ void cdrom_analyze_sense_data(ide_drive_t *drive, else printk(" Unknown Error Type: "); - if (sense->sense_key < ARY_LEN(sense_key_texts)) + if (sense->sense_key < ARRAY_SIZE(sense_key_texts)) s = sense_key_texts[sense->sense_key]; printk("%s -- (Sense key=0x%02x)\n", s, sense->sense_key); @@ -491,7 +491,7 @@ void cdrom_analyze_sense_data(ide_drive_t *drive, sense->ascq); s = buf; } else { - int lo = 0, mid, hi = ARY_LEN(sense_data_texts); + int lo = 0, mid, hi = ARRAY_SIZE(sense_data_texts); unsigned long key = (sense->sense_key << 16); key |= (sense->asc << 8); if (!(sense->ascq >= 0x80 && sense->ascq <= 0xdd)) @@ -524,7 +524,7 @@ void cdrom_analyze_sense_data(ide_drive_t *drive, if (failed_command != NULL) { - int lo=0, mid, hi= ARY_LEN (packet_command_texts); + int lo=0, mid, hi= ARRAY_SIZE(packet_command_texts); s = NULL; while (hi > lo) { diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h index ad1f2ed14a3..228b29c5d2e 100644 --- a/drivers/ide/ide-cd.h +++ b/drivers/ide/ide-cd.h @@ -498,8 +498,6 @@ struct cdrom_info { * Descriptions of ATAPI error codes. */ -#define ARY_LEN(a) ((sizeof(a) / sizeof(a[0]))) - /* This stuff should be in cdrom.h, since it is now generic... */ /* ATAPI sense keys (from table 140 of ATAPI 2.6) */ diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index dc2175c81f5..b1304a7f3e0 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -1190,11 +1190,11 @@ static int idedisk_ioctl(struct inode *inode, struct file *file, return generic_ide_ioctl(drive, file, bdev, cmd, arg); read_val: - down(&ide_setting_sem); + mutex_lock(&ide_setting_mtx); spin_lock_irqsave(&ide_lock, flags); err = *val; spin_unlock_irqrestore(&ide_lock, flags); - up(&ide_setting_sem); + mutex_unlock(&ide_setting_mtx); return err >= 0 ? put_user(err, (long __user *)arg) : err; set_val: @@ -1204,9 +1204,9 @@ set_val: if (!capable(CAP_SYS_ADMIN)) err = -EACCES; else { - down(&ide_setting_sem); + mutex_lock(&ide_setting_mtx); err = setfunc(drive, arg); - up(&ide_setting_sem); + mutex_unlock(&ide_setting_mtx); } } return err; diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index ead141e2db9..5fe1d72ab45 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -91,45 +91,45 @@ static const struct drive_list_entry drive_whitelist [] = { - { "Micropolis 2112A" , "ALL" }, - { "CONNER CTMA 4000" , "ALL" }, - { "CONNER CTT8000-A" , "ALL" }, - { "ST34342A" , "ALL" }, + { "Micropolis 2112A" , NULL }, + { "CONNER CTMA 4000" , NULL }, + { "CONNER CTT8000-A" , NULL }, + { "ST34342A" , NULL }, { NULL , NULL } }; static const struct drive_list_entry drive_blacklist [] = { - { "WDC AC11000H" , "ALL" }, - { "WDC AC22100H" , "ALL" }, - { "WDC AC32500H" , "ALL" }, - { "WDC AC33100H" , "ALL" }, - { "WDC AC31600H" , "ALL" }, + { "WDC AC11000H" , NULL }, + { "WDC AC22100H" , NULL }, + { "WDC AC32500H" , NULL }, + { "WDC AC33100H" , NULL }, + { "WDC AC31600H" , NULL }, { "WDC AC32100H" , "24.09P07" }, { "WDC AC23200L" , "21.10N21" }, - { "Compaq CRD-8241B" , "ALL" }, - { "CRD-8400B" , "ALL" }, - { "CRD-8480B", "ALL" }, - { "CRD-8482B", "ALL" }, - { "CRD-84" , "ALL" }, - { "SanDisk SDP3B" , "ALL" }, - { "SanDisk SDP3B-64" , "ALL" }, - { "SANYO CD-ROM CRD" , "ALL" }, - { "HITACHI CDR-8" , "ALL" }, - { "HITACHI CDR-8335" , "ALL" }, - { "HITACHI CDR-8435" , "ALL" }, - { "Toshiba CD-ROM XM-6202B" , "ALL" }, - { "TOSHIBA CD-ROM XM-1702BC", "ALL" }, - { "CD-532E-A" , "ALL" }, - { "E-IDE CD-ROM CR-840", "ALL" }, - { "CD-ROM Drive/F5A", "ALL" }, - { "WPI CDD-820", "ALL" }, - { "SAMSUNG CD-ROM SC-148C", "ALL" }, - { "SAMSUNG CD-ROM SC", "ALL" }, - { "ATAPI CD-ROM DRIVE 40X MAXIMUM", "ALL" }, - { "_NEC DV5800A", "ALL" }, + { "Compaq CRD-8241B" , NULL }, + { "CRD-8400B" , NULL }, + { "CRD-8480B", NULL }, + { "CRD-8482B", NULL }, + { "CRD-84" , NULL }, + { "SanDisk SDP3B" , NULL }, + { "SanDisk SDP3B-64" , NULL }, + { "SANYO CD-ROM CRD" , NULL }, + { "HITACHI CDR-8" , NULL }, + { "HITACHI CDR-8335" , NULL }, + { "HITACHI CDR-8435" , NULL }, + { "Toshiba CD-ROM XM-6202B" , NULL }, + { "TOSHIBA CD-ROM XM-1702BC", NULL }, + { "CD-532E-A" , NULL }, + { "E-IDE CD-ROM CR-840", NULL }, + { "CD-ROM Drive/F5A", NULL }, + { "WPI CDD-820", NULL }, + { "SAMSUNG CD-ROM SC-148C", NULL }, + { "SAMSUNG CD-ROM SC", NULL }, + { "ATAPI CD-ROM DRIVE 40X MAXIMUM", NULL }, + { "_NEC DV5800A", NULL }, { "SAMSUNG CD-ROM SN-124", "N001" }, - { "Seagate STT20000A", "ALL" }, + { "Seagate STT20000A", NULL }, { NULL , NULL } }; @@ -147,8 +147,8 @@ int ide_in_drive_list(struct hd_driveid *id, const struct drive_list_entry *driv { for ( ; drive_table->id_model ; drive_table++) if ((!strcmp(drive_table->id_model, id->model)) && - ((strstr(id->fw_rev, drive_table->id_firmware)) || - (!strcmp(drive_table->id_firmware, "ALL")))) + (!drive_table->id_firmware || + strstr(id->fw_rev, drive_table->id_firmware))) return 1; return 0; } @@ -702,8 +702,22 @@ static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base) mask = id->dma_mword & hwif->mwdma_mask; break; case XFER_SW_DMA_0: - if (id->field_valid & 2) + if (id->field_valid & 2) { mask = id->dma_1word & hwif->swdma_mask; + } else if (id->tDMA) { + /* + * ide_fix_driveid() doesn't convert ->tDMA to the + * CPU endianness so we need to do it here + */ + u8 mode = le16_to_cpu(id->tDMA); + + /* + * if the mode is valid convert it to the mask + * (the maximum allowed mode is XFER_SW_DMA_2) + */ + if (mode <= 2) + mask = ((2 << mode) - 1) & hwif->swdma_mask; + } break; default: BUG(); @@ -847,27 +861,27 @@ int ide_set_dma(ide_drive_t *drive) return rc; } -EXPORT_SYMBOL_GPL(ide_set_dma); - #ifdef CONFIG_BLK_DEV_IDEDMA_PCI -int __ide_dma_lostirq (ide_drive_t *drive) +void ide_dma_lost_irq (ide_drive_t *drive) { printk("%s: DMA interrupt recovery\n", drive->name); - return 1; } -EXPORT_SYMBOL(__ide_dma_lostirq); +EXPORT_SYMBOL(ide_dma_lost_irq); -int __ide_dma_timeout (ide_drive_t *drive) +void ide_dma_timeout (ide_drive_t *drive) { + ide_hwif_t *hwif = HWIF(drive); + printk(KERN_ERR "%s: timeout waiting for DMA\n", drive->name); - if (HWIF(drive)->ide_dma_test_irq(drive)) - return 0; - return HWIF(drive)->ide_dma_end(drive); + if (hwif->ide_dma_test_irq(drive)) + return; + + hwif->ide_dma_end(drive); } -EXPORT_SYMBOL(__ide_dma_timeout); +EXPORT_SYMBOL(ide_dma_timeout); /* * Needed for allowing full modular support of ide-driver @@ -1018,10 +1032,10 @@ void ide_setup_dma (ide_hwif_t *hwif, unsigned long dma_base, unsigned int num_p hwif->ide_dma_end = &__ide_dma_end; if (!hwif->ide_dma_test_irq) hwif->ide_dma_test_irq = &__ide_dma_test_irq; - if (!hwif->ide_dma_timeout) - hwif->ide_dma_timeout = &__ide_dma_timeout; - if (!hwif->ide_dma_lostirq) - hwif->ide_dma_lostirq = &__ide_dma_lostirq; + if (!hwif->dma_timeout) + hwif->dma_timeout = &ide_dma_timeout; + if (!hwif->dma_lost_irq) + hwif->dma_lost_irq = &ide_dma_lost_irq; if (hwif->chipset != ide_trm290) { u8 dma_stat = hwif->INB(hwif->dma_status); diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index bfe8f1b712b..c5b5011da56 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -1350,7 +1350,7 @@ static ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) hwif->INB(IDE_STATUS_REG)); } else { printk(KERN_WARNING "%s: DMA timeout retry\n", drive->name); - (void) hwif->ide_dma_timeout(drive); + hwif->dma_timeout(drive); } /* @@ -1466,7 +1466,7 @@ void ide_timer_expiry (unsigned long data) startstop = handler(drive); } else if (drive_is_ready(drive)) { if (drive->waiting_for_dma) - (void) hwgroup->hwif->ide_dma_lostirq(drive); + hwgroup->hwif->dma_lost_irq(drive); (void)ide_ack_intr(hwif); printk(KERN_WARNING "%s: lost interrupt\n", drive->name); startstop = handler(drive); diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index f0be5f665a0..92578b6832e 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -574,7 +574,10 @@ u8 eighty_ninty_three (ide_drive_t *drive) ide_hwif_t *hwif = drive->hwif; struct hd_driveid *id = drive->id; - if (hwif->udma_four == 0) + if (hwif->cbl == ATA_CBL_PATA40_SHORT) + return 1; + + if (hwif->cbl != ATA_CBL_PATA80) goto no_80w; /* Check for SATA but only if we are ATA5 or higher */ @@ -600,7 +603,8 @@ no_80w: printk(KERN_WARNING "%s: %s side 80-wire cable detection failed, " "limiting max speed to UDMA33\n", - drive->name, hwif->udma_four ? "drive" : "host"); + drive->name, + hwif->cbl == ATA_CBL_PATA80 ? "drive" : "host"); drive->udma33_warned = 1; diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index f5ce22c38f8..cc580139946 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -144,7 +144,7 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd) local_irq_enable(); ide_fix_driveid(id); -#if defined (CONFIG_SCSI_EATA_DMA) || defined (CONFIG_SCSI_EATA_PIO) || defined (CONFIG_SCSI_EATA) +#if defined (CONFIG_SCSI_EATA_PIO) || defined (CONFIG_SCSI_EATA) /* * EATA SCSI controllers do a hardware ATA emulation: * Ignore them if there is a driver for them available. @@ -154,7 +154,7 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd) printk("%s: EATA SCSI HBA %.10s\n", drive->name, id->model); goto err_misc; } -#endif /* CONFIG_SCSI_EATA_DMA || CONFIG_SCSI_EATA_PIO */ +#endif /* CONFIG_SCSI_EATA || CONFIG_SCSI_EATA_PIO */ /* * WIN_IDENTIFY returns little-endian info, @@ -1025,7 +1025,7 @@ static int init_irq (ide_hwif_t *hwif) BUG_ON(irqs_disabled()); BUG_ON(hwif == NULL); - down(&ide_cfg_sem); + mutex_lock(&ide_cfg_mtx); hwif->hwgroup = NULL; #if MAX_HWIFS > 1 /* @@ -1154,7 +1154,7 @@ static int init_irq (ide_hwif_t *hwif) printk(" (%sed with %s)", hwif->sharing_irq ? "shar" : "serializ", match->name); printk("\n"); - up(&ide_cfg_sem); + mutex_unlock(&ide_cfg_mtx); return 0; out_unlink: spin_lock_irq(&ide_lock); @@ -1177,7 +1177,7 @@ out_unlink: } spin_unlock_irq(&ide_lock); out_up: - up(&ide_cfg_sem); + mutex_unlock(&ide_cfg_mtx); return 1; } diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index ea94c9aa122..fc1d8ae6a80 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -156,7 +156,7 @@ static int __ide_add_setting(ide_drive_t *drive, const char *name, int rw, int d { ide_settings_t **p = (ide_settings_t **) &drive->settings, *setting = NULL; - down(&ide_setting_sem); + mutex_lock(&ide_setting_mtx); while ((*p) && strcmp((*p)->name, name) < 0) p = &((*p)->next); if ((setting = kzalloc(sizeof(*setting), GFP_KERNEL)) == NULL) @@ -177,10 +177,10 @@ static int __ide_add_setting(ide_drive_t *drive, const char *name, int rw, int d if (auto_remove) setting->auto_remove = 1; *p = setting; - up(&ide_setting_sem); + mutex_unlock(&ide_setting_mtx); return 0; abort: - up(&ide_setting_sem); + mutex_unlock(&ide_setting_mtx); kfree(setting); return -1; } @@ -224,7 +224,7 @@ static void __ide_remove_setting (ide_drive_t *drive, char *name) * * Automatically remove all the driver specific settings for this * drive. This function may not be called from IRQ context. The - * caller must hold ide_setting_sem. + * caller must hold ide_setting_mtx. */ static void auto_remove_settings (ide_drive_t *drive) @@ -269,7 +269,7 @@ static ide_settings_t *ide_find_setting_by_name(ide_drive_t *drive, char *name) * @setting: drive setting * * Read a drive setting and return the value. The caller - * must hold the ide_setting_sem when making this call. + * must hold the ide_setting_mtx when making this call. * * BUGS: the data return and error are the same return value * so an error -EINVAL and true return of the same value cannot @@ -306,7 +306,7 @@ static int ide_read_setting(ide_drive_t *drive, ide_settings_t *setting) * @val: value * * Write a drive setting if it is possible. The caller - * must hold the ide_setting_sem when making this call. + * must hold the ide_setting_mtx when making this call. * * BUGS: the data return and error are the same return value * so an error -EINVAL and true return of the same value cannot @@ -367,7 +367,7 @@ static int set_xfer_rate (ide_drive_t *drive, int arg) * @drive: drive being configured * * Add the generic parts of the system settings to the /proc files. - * The caller must not be holding the ide_setting_sem. + * The caller must not be holding the ide_setting_mtx. */ void ide_add_generic_settings (ide_drive_t *drive) @@ -408,7 +408,7 @@ static int proc_ide_read_settings proc_ide_settings_warn(); - down(&ide_setting_sem); + mutex_lock(&ide_setting_mtx); out += sprintf(out, "name\t\t\tvalue\t\tmin\t\tmax\t\tmode\n"); out += sprintf(out, "----\t\t\t-----\t\t---\t\t---\t\t----\n"); while(setting) { @@ -428,7 +428,7 @@ static int proc_ide_read_settings setting = setting->next; } len = out - page; - up(&ide_setting_sem); + mutex_unlock(&ide_setting_mtx); PROC_IDE_READ_RETURN(page,start,off,count,eof,len); } @@ -508,16 +508,16 @@ static int proc_ide_write_settings(struct file *file, const char __user *buffer, ++p; } - down(&ide_setting_sem); + mutex_lock(&ide_setting_mtx); setting = ide_find_setting_by_name(drive, name); if (!setting) { - up(&ide_setting_sem); + mutex_unlock(&ide_setting_mtx); goto parse_error; } if (for_real) ide_write_setting(drive, setting, val * setting->div_factor / setting->mul_factor); - up(&ide_setting_sem); + mutex_unlock(&ide_setting_mtx); } } while (!for_real++); free_page((unsigned long)buf); @@ -705,7 +705,7 @@ EXPORT_SYMBOL(ide_proc_register_driver); * Clean up the driver specific /proc files and IDE settings * for a given drive. * - * Takes ide_setting_sem and ide_lock. + * Takes ide_setting_mtx and ide_lock. * Caller must hold none of the locks. */ @@ -715,10 +715,10 @@ void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver) ide_remove_proc_entries(drive->proc, driver->proc); - down(&ide_setting_sem); + mutex_lock(&ide_setting_mtx); spin_lock_irqsave(&ide_lock, flags); /* - * ide_setting_sem protects the settings list + * ide_setting_mtx protects the settings list * ide_lock protects the use of settings * * so we need to hold both, ide_settings_sem because we want to @@ -726,11 +726,11 @@ void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver) * a setting out that is being used. * * OTOH both ide_{read,write}_setting are only ever used under - * ide_setting_sem. + * ide_setting_mtx. */ auto_remove_settings(drive); spin_unlock_irqrestore(&ide_lock, flags); - up(&ide_setting_sem); + mutex_unlock(&ide_setting_mtx); } EXPORT_SYMBOL(ide_proc_unregister_driver); diff --git a/drivers/ide/ide-timing.h b/drivers/ide/ide-timing.h index c0864b1e922..e6cb8593b5b 100644 --- a/drivers/ide/ide-timing.h +++ b/drivers/ide/ide-timing.h @@ -102,66 +102,16 @@ static struct ide_timing ide_timing[] = { #define EZ(v,unit) ((v)?ENOUGH(v,unit):0) #define XFER_MODE 0xf0 -#define XFER_UDMA_133 0x48 -#define XFER_UDMA_100 0x44 -#define XFER_UDMA_66 0x42 -#define XFER_UDMA 0x40 #define XFER_MWDMA 0x20 -#define XFER_SWDMA 0x10 #define XFER_EPIO 0x01 #define XFER_PIO 0x00 -static short ide_find_best_mode(ide_drive_t *drive, int map) +static short ide_find_best_pio_mode(ide_drive_t *drive) { struct hd_driveid *id = drive->id; short best = 0; - if (!id) - return XFER_PIO_SLOW; - - if ((map & XFER_UDMA) && (id->field_valid & 4)) { /* Want UDMA and UDMA bitmap valid */ - - if ((map & XFER_UDMA_133) == XFER_UDMA_133) - if ((best = (id->dma_ultra & 0x0040) ? XFER_UDMA_6 : 0)) return best; - - if ((map & XFER_UDMA_100) == XFER_UDMA_100) - if ((best = (id->dma_ultra & 0x0020) ? XFER_UDMA_5 : 0)) return best; - - if ((map & XFER_UDMA_66) == XFER_UDMA_66) - if ((best = (id->dma_ultra & 0x0010) ? XFER_UDMA_4 : - (id->dma_ultra & 0x0008) ? XFER_UDMA_3 : 0)) return best; - - if ((best = (id->dma_ultra & 0x0004) ? XFER_UDMA_2 : - (id->dma_ultra & 0x0002) ? XFER_UDMA_1 : - (id->dma_ultra & 0x0001) ? XFER_UDMA_0 : 0)) return best; - } - - if ((map & XFER_MWDMA) && (id->field_valid & 2)) { /* Want MWDMA and drive has EIDE fields */ - - if ((best = (id->dma_mword & 0x0004) ? XFER_MW_DMA_2 : - (id->dma_mword & 0x0002) ? XFER_MW_DMA_1 : - (id->dma_mword & 0x0001) ? XFER_MW_DMA_0 : 0)) return best; - } - - if (map & XFER_SWDMA) { /* Want SWDMA */ - - if (id->field_valid & 2) { /* EIDE SWDMA */ - - if ((best = (id->dma_1word & 0x0004) ? XFER_SW_DMA_2 : - (id->dma_1word & 0x0002) ? XFER_SW_DMA_1 : - (id->dma_1word & 0x0001) ? XFER_SW_DMA_0 : 0)) return best; - } - - if (id->capability & 1) { /* Pre-EIDE style SWDMA */ - - if ((best = (id->tDMA == 2) ? XFER_SW_DMA_2 : - (id->tDMA == 1) ? XFER_SW_DMA_1 : - (id->tDMA == 0) ? XFER_SW_DMA_0 : 0)) return best; - } - } - - - if ((map & XFER_EPIO) && (id->field_valid & 2)) { /* EIDE PIO modes */ + if (id->field_valid & 2) { /* EIDE PIO modes */ if ((best = (drive->id->eide_pio_modes & 4) ? XFER_PIO_5 : (drive->id->eide_pio_modes & 2) ? XFER_PIO_4 : @@ -262,7 +212,7 @@ static int ide_timing_compute(ide_drive_t *drive, short speed, struct ide_timing */ if ((speed & XFER_MODE) != XFER_PIO) { - ide_timing_compute(drive, ide_find_best_mode(drive, XFER_PIO | XFER_EPIO), &p, T, UT); + ide_timing_compute(drive, ide_find_best_pio_mode(drive), &p, T, UT); ide_timing_merge(&p, t, t, IDE_TIMING_ALL); } diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 0cd76bf6683..c948a5c17a5 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -169,7 +169,7 @@ static const u8 ide_hwif_to_major[] = { IDE0_MAJOR, IDE1_MAJOR, static int idebus_parameter; /* holds the "idebus=" parameter */ static int system_bus_speed; /* holds what we think is VESA/PCI bus speed */ -DECLARE_MUTEX(ide_cfg_sem); +DEFINE_MUTEX(ide_cfg_mtx); __cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock); #ifdef CONFIG_IDEPCI_PCIBUS_ORDER @@ -460,6 +460,8 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif) hwif->mwdma_mask = tmp_hwif->mwdma_mask; hwif->swdma_mask = tmp_hwif->swdma_mask; + hwif->cbl = tmp_hwif->cbl; + hwif->chipset = tmp_hwif->chipset; hwif->hold = tmp_hwif->hold; @@ -496,8 +498,8 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif) hwif->ide_dma_clear_irq = tmp_hwif->ide_dma_clear_irq; hwif->dma_host_on = tmp_hwif->dma_host_on; hwif->dma_host_off = tmp_hwif->dma_host_off; - hwif->ide_dma_lostirq = tmp_hwif->ide_dma_lostirq; - hwif->ide_dma_timeout = tmp_hwif->ide_dma_timeout; + hwif->dma_lost_irq = tmp_hwif->dma_lost_irq; + hwif->dma_timeout = tmp_hwif->dma_timeout; hwif->OUTB = tmp_hwif->OUTB; hwif->OUTBSYNC = tmp_hwif->OUTBSYNC; @@ -533,7 +535,6 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif) hwif->extra_base = tmp_hwif->extra_base; hwif->extra_ports = tmp_hwif->extra_ports; hwif->autodma = tmp_hwif->autodma; - hwif->udma_four = tmp_hwif->udma_four; hwif->hwif_data = tmp_hwif->hwif_data; } @@ -564,7 +565,7 @@ void ide_unregister(unsigned int index) { ide_drive_t *drive; ide_hwif_t *hwif, *g; - static ide_hwif_t tmp_hwif; /* protected by ide_cfg_sem */ + static ide_hwif_t tmp_hwif; /* protected by ide_cfg_mtx */ ide_hwgroup_t *hwgroup; int irq_count = 0, unit; @@ -572,7 +573,7 @@ void ide_unregister(unsigned int index) BUG_ON(in_interrupt()); BUG_ON(irqs_disabled()); - down(&ide_cfg_sem); + mutex_lock(&ide_cfg_mtx); spin_lock_irq(&ide_lock); hwif = &ide_hwifs[index]; if (!hwif->present) @@ -679,7 +680,7 @@ void ide_unregister(unsigned int index) abort: spin_unlock_irq(&ide_lock); - up(&ide_cfg_sem); + mutex_unlock(&ide_cfg_mtx); } EXPORT_SYMBOL(ide_unregister); @@ -817,9 +818,9 @@ EXPORT_SYMBOL(ide_register_hw); * Locks for IDE setting functionality */ -DECLARE_MUTEX(ide_setting_sem); +DEFINE_MUTEX(ide_setting_mtx); -EXPORT_SYMBOL_GPL(ide_setting_sem); +EXPORT_SYMBOL_GPL(ide_setting_mtx); /** * ide_spin_wait_hwgroup - wait for group @@ -1192,11 +1193,11 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device } read_val: - down(&ide_setting_sem); + mutex_lock(&ide_setting_mtx); spin_lock_irqsave(&ide_lock, flags); err = *val; spin_unlock_irqrestore(&ide_lock, flags); - up(&ide_setting_sem); + mutex_unlock(&ide_setting_mtx); return err >= 0 ? put_user(err, (long __user *)arg) : err; set_val: @@ -1206,9 +1207,9 @@ set_val: if (!capable(CAP_SYS_ADMIN)) err = -EACCES; else { - down(&ide_setting_sem); + mutex_lock(&ide_setting_mtx); err = setfunc(drive, arg); - up(&ide_setting_sem); + mutex_unlock(&ide_setting_mtx); } } return err; @@ -1548,7 +1549,11 @@ static int __init ide_setup(char *s) goto bad_option; case -7: /* ata66 */ #ifdef CONFIG_BLK_DEV_IDEPCI - hwif->udma_four = 1; + /* + * Use ATA_CBL_PATA40_SHORT so drive side + * cable detection is also overriden. + */ + hwif->cbl = ATA_CBL_PATA40_SHORT; goto obsolete_option; #else goto bad_hwif; diff --git a/drivers/ide/legacy/hd.c b/drivers/ide/legacy/hd.c index 45ed03591cd..8f2db8dd35f 100644 --- a/drivers/ide/legacy/hd.c +++ b/drivers/ide/legacy/hd.c @@ -130,7 +130,7 @@ struct hd_i_struct { #ifdef HD_TYPE static struct hd_i_struct hd_info[] = { HD_TYPE }; -static int NR_HD = ((sizeof (hd_info))/(sizeof (struct hd_i_struct))); +static int NR_HD = ARRAY_SIZE(hd_info); #else static struct hd_i_struct hd_info[MAX_HD]; static int NR_HD; @@ -623,7 +623,8 @@ repeat: cyl = track / disk->head; #ifdef DEBUG printk("%s: %sing: CHS=%d/%d/%d, sectors=%d, buffer=%p\n", - req->rq_disk->disk_name, (req->cmd == READ)?"read":"writ", + req->rq_disk->disk_name, + req_data_dir(req) == READ ? "read" : "writ", cyl, head, sec, nsect, req->buffer); #endif if (blk_fs_request(req)) { @@ -718,74 +719,25 @@ static int __init hd_init(void) device_timer.function = hd_times_out; blk_queue_hardsect_size(hd_queue, 512); -#ifdef __i386__ if (!NR_HD) { - extern struct drive_info drive_info; - unsigned char *BIOS = (unsigned char *) &drive_info; - unsigned long flags; - int cmos_disks; - - for (drive=0 ; drive<2 ; drive++) { - hd_info[drive].cyl = *(unsigned short *) BIOS; - hd_info[drive].head = *(2+BIOS); - hd_info[drive].wpcom = *(unsigned short *) (5+BIOS); - hd_info[drive].ctl = *(8+BIOS); - hd_info[drive].lzone = *(unsigned short *) (12+BIOS); - hd_info[drive].sect = *(14+BIOS); -#ifdef does_not_work_for_everybody_with_scsi_but_helps_ibm_vp - if (hd_info[drive].cyl && NR_HD == drive) - NR_HD++; -#endif - BIOS += 16; - } - - /* - We query CMOS about hard disks : it could be that - we have a SCSI/ESDI/etc controller that is BIOS - compatible with ST-506, and thus showing up in our - BIOS table, but not register compatible, and therefore - not present in CMOS. - - Furthermore, we will assume that our ST-506 drives - <if any> are the primary drives in the system, and - the ones reflected as drive 1 or 2. - - The first drive is stored in the high nibble of CMOS - byte 0x12, the second in the low nibble. This will be - either a 4 bit drive type or 0xf indicating use byte 0x19 - for an 8 bit type, drive 1, 0x1a for drive 2 in CMOS. - - Needless to say, a non-zero value means we have - an AT controller hard disk for that drive. - - Currently the rtc_lock is a bit academic since this - driver is non-modular, but someday... ? Paul G. - */ - - spin_lock_irqsave(&rtc_lock, flags); - cmos_disks = CMOS_READ(0x12); - spin_unlock_irqrestore(&rtc_lock, flags); - - if (cmos_disks & 0xf0) { - if (cmos_disks & 0x0f) - NR_HD = 2; - else - NR_HD = 1; - } - } -#endif /* __i386__ */ -#ifdef __arm__ - if (!NR_HD) { - /* We don't know anything about the drive. This means + /* + * We don't know anything about the drive. This means * that you *MUST* specify the drive parameters to the * kernel yourself. + * + * If we were on an i386, we used to read this info from + * the BIOS or CMOS. This doesn't work all that well, + * since this assumes that this is a primary or secondary + * drive, and if we're using this legacy driver, it's + * probably an auxilliary controller added to recover + * legacy data off an ST-506 drive. Either way, it's + * definitely safest to have the user explicitly specify + * the information. */ printk("hd: no drives specified - use hd=cyl,head,sectors" " on kernel command line\n"); - } -#endif - if (!NR_HD) goto out; + } for (drive=0 ; drive < NR_HD ; drive++) { struct gendisk *disk = alloc_disk(64); diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c index c211fc78345..b557c45a5a9 100644 --- a/drivers/ide/legacy/macide.c +++ b/drivers/ide/legacy/macide.c @@ -77,15 +77,6 @@ int macide_ack_intr(ide_hwif_t* hwif) return 0; } -#ifdef CONFIG_BLK_DEV_MAC_MEDIABAY -static void macide_mediabay_interrupt(int irq, void *dev_id) -{ - int state = baboon->mb_status & 0x04; - - printk(KERN_INFO "macide: media bay %s detected\n", state? "removal":"insertion"); -} -#endif - /* * Probe for a Macintosh IDE interface */ @@ -128,11 +119,6 @@ void macide_init(void) ide_drive_t *drive = &ide_hwifs[index].drives[0]; drive->capacity64 = drive->cyl*drive->head*drive->sect; -#ifdef CONFIG_BLK_DEV_MAC_MEDIABAY - request_irq(IRQ_BABOON_2, macide_mediabay_interrupt, - IRQ_FLG_FAST, "mediabay", - macide_mediabay_interrupt); -#endif } break; diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c index ca95e990862..2e7013a2a7f 100644 --- a/drivers/ide/mips/au1xxx-ide.c +++ b/drivers/ide/mips/au1xxx-ide.c @@ -381,9 +381,7 @@ static int auide_dma_setup(ide_drive_t *drive) static int auide_dma_check(ide_drive_t *drive) { - u8 speed; - -#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA + u8 speed = ide_max_dma_mode(drive); if( dbdma_init_done == 0 ){ auide_hwif.white_list = ide_in_drive_list(drive->id, @@ -394,7 +392,6 @@ static int auide_dma_check(ide_drive_t *drive) auide_ddma_init(&auide_hwif); dbdma_init_done = 1; } -#endif /* Is the drive in our DMA black list? */ @@ -409,8 +406,6 @@ static int auide_dma_check(ide_drive_t *drive) else drive->using_dma = 1; - speed = ide_find_best_mode(drive, XFER_PIO | XFER_MWDMA); - if (drive->autodma && (speed & XFER_MODE) != XFER_PIO) return 0; @@ -456,10 +451,9 @@ static void auide_dma_off_quietly(ide_drive_t *drive) drive->using_dma = 0; } -static int auide_dma_lostirq(ide_drive_t *drive) +static void auide_dma_lost_irq(ide_drive_t *drive) { printk(KERN_ERR "%s: IRQ lost\n", drive->name); - return 0; } static void auide_ddma_tx_callback(int irq, void *param) @@ -489,16 +483,16 @@ static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 de #if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA) -static int auide_dma_timeout(ide_drive_t *drive) +static void auide_dma_timeout(ide_drive_t *drive) { -// printk("%s\n", __FUNCTION__); + ide_hwif_t *hwif = HWIF(drive); printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name); - if (HWIF(drive)->ide_dma_test_irq(drive)) - return 0; + if (hwif->ide_dma_test_irq(drive)) + return; - return HWIF(drive)->ide_dma_end(drive); + hwif->ide_dma_end(drive); } @@ -721,7 +715,7 @@ static int au_ide_probe(struct device *dev) #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA hwif->dma_off_quietly = &auide_dma_off_quietly; - hwif->ide_dma_timeout = &auide_dma_timeout; + hwif->dma_timeout = &auide_dma_timeout; hwif->ide_dma_check = &auide_dma_check; hwif->dma_exec_cmd = &auide_dma_exec_cmd; @@ -731,7 +725,7 @@ static int au_ide_probe(struct device *dev) hwif->ide_dma_test_irq = &auide_dma_test_irq; hwif->dma_host_off = &auide_dma_host_off; hwif->dma_host_on = &auide_dma_host_on; - hwif->ide_dma_lostirq = &auide_dma_lostirq; + hwif->dma_lost_irq = &auide_dma_lost_irq; hwif->ide_dma_on = &auide_dma_on; hwif->autodma = 1; diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c index b173bc66ce1..e5d09367627 100644 --- a/drivers/ide/pci/aec62xx.c +++ b/drivers/ide/pci/aec62xx.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/aec62xx.c Version 0.21 Apr 21, 2007 + * linux/drivers/ide/pci/aec62xx.c Version 0.24 May 24, 2007 * * Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org> * Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com> @@ -140,25 +140,10 @@ static int aec6260_tune_chipset (ide_drive_t *drive, u8 xferspeed) return(ide_config_drive_speed(drive, speed)); } -static int aec62xx_tune_chipset (ide_drive_t *drive, u8 speed) -{ - switch (HWIF(drive)->pci_dev->device) { - case PCI_DEVICE_ID_ARTOP_ATP865: - case PCI_DEVICE_ID_ARTOP_ATP865R: - case PCI_DEVICE_ID_ARTOP_ATP860: - case PCI_DEVICE_ID_ARTOP_ATP860R: - return ((int) aec6260_tune_chipset(drive, speed)); - case PCI_DEVICE_ID_ARTOP_ATP850UF: - return ((int) aec6210_tune_chipset(drive, speed)); - default: - return -1; - } -} - static void aec62xx_tune_drive (ide_drive_t *drive, u8 pio) { pio = ide_get_best_pio_mode(drive, pio, 4, NULL); - (void) aec62xx_tune_chipset(drive, pio + XFER_PIO_0); + (void) HWIF(drive)->speedproc(drive, pio + XFER_PIO_0); } static int aec62xx_config_drive_xfer_rate (ide_drive_t *drive) @@ -172,12 +157,9 @@ static int aec62xx_config_drive_xfer_rate (ide_drive_t *drive) return -1; } -static int aec62xx_irq_timeout (ide_drive_t *drive) +static void aec62xx_dma_lost_irq (ide_drive_t *drive) { - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = hwif->pci_dev; - - switch(dev->device) { + switch (HWIF(drive)->pci_dev->device) { case PCI_DEVICE_ID_ARTOP_ATP860: case PCI_DEVICE_ID_ARTOP_ATP860R: case PCI_DEVICE_ID_ARTOP_ATP865: @@ -186,7 +168,6 @@ static int aec62xx_irq_timeout (ide_drive_t *drive) default: break; } - return 0; } static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const char *name) @@ -224,64 +205,46 @@ static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const ch static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif) { - struct pci_dev *dev = hwif->pci_dev; + struct pci_dev *dev = hwif->pci_dev; + u8 reg54 = 0, mask = hwif->channel ? 0xf0 : 0x0f; + unsigned long flags; - hwif->autodma = 0; hwif->tuneproc = &aec62xx_tune_drive; - hwif->speedproc = &aec62xx_tune_chipset; - if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) - hwif->serialized = hwif->channel; - - if (hwif->mate) - hwif->mate->serialized = hwif->serialized; + if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) { + if(hwif->mate) + hwif->mate->serialized = hwif->serialized = 1; + hwif->speedproc = &aec6210_tune_chipset; + } else + hwif->speedproc = &aec6260_tune_chipset; if (!hwif->dma_base) { - hwif->drives[0].autotune = 1; - hwif->drives[1].autotune = 1; + hwif->drives[0].autotune = hwif->drives[1].autotune = 1; return; } hwif->ultra_mask = hwif->cds->udma_mask; - - /* atp865 and atp865r */ - if (hwif->ultra_mask == 0x3f) { - /* check bit 0x10 of DMA status register */ - if (inb(pci_resource_start(dev, 4) + 2) & 0x10) - hwif->ultra_mask = 0x7f; /* udma0-6 */ - } - hwif->mwdma_mask = 0x07; hwif->ide_dma_check = &aec62xx_config_drive_xfer_rate; - hwif->ide_dma_lostirq = &aec62xx_irq_timeout; - - if (!noautodma) - hwif->autodma = 1; - hwif->drives[0].autodma = hwif->autodma; - hwif->drives[1].autodma = hwif->autodma; -} - -static void __devinit init_dma_aec62xx(ide_hwif_t *hwif, unsigned long dmabase) -{ - struct pci_dev *dev = hwif->pci_dev; + hwif->dma_lost_irq = &aec62xx_dma_lost_irq; if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) { - u8 reg54h = 0; - unsigned long flags; - spin_lock_irqsave(&ide_lock, flags); - pci_read_config_byte(dev, 0x54, ®54h); - pci_write_config_byte(dev, 0x54, reg54h & ~(hwif->channel ? 0xF0 : 0x0F)); + pci_read_config_byte (dev, 0x54, ®54); + pci_write_config_byte(dev, 0x54, (reg54 & ~mask)); spin_unlock_irqrestore(&ide_lock, flags); - } else { - u8 ata66 = 0; + } else if (hwif->cbl != ATA_CBL_PATA40_SHORT) { + u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01; + pci_read_config_byte(hwif->pci_dev, 0x49, &ata66); - if (!(hwif->udma_four)) - hwif->udma_four = (ata66&(hwif->channel?0x02:0x01))?0:1; + + hwif->cbl = (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; } - ide_setup_dma(hwif, dmabase, 8); + if (!noautodma) + hwif->autodma = 1; + hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma; } static int __devinit init_setup_aec62xx(struct pci_dev *dev, ide_pci_device_t *d) @@ -291,16 +254,12 @@ static int __devinit init_setup_aec62xx(struct pci_dev *dev, ide_pci_device_t *d static int __devinit init_setup_aec6x80(struct pci_dev *dev, ide_pci_device_t *d) { - unsigned long bar4reg = pci_resource_start(dev, 4); - - if (inb(bar4reg+2) & 0x10) { - strcpy(d->name, "AEC6880"); - if (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R) - strcpy(d->name, "AEC6880R"); - } else { - strcpy(d->name, "AEC6280"); - if (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R) - strcpy(d->name, "AEC6280R"); + unsigned long dma_base = pci_resource_start(dev, 4); + + if (inb(dma_base + 2) & 0x10) { + d->name = (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R) ? + "AEC6880R" : "AEC6880"; + d->udma_mask = 0x7f; /* udma0-6 */ } return ide_setup_pci_device(dev, d); @@ -312,7 +271,6 @@ static ide_pci_device_t aec62xx_chipsets[] __devinitdata = { .init_setup = init_setup_aec62xx, .init_chipset = init_chipset_aec62xx, .init_hwif = init_hwif_aec62xx, - .init_dma = init_dma_aec62xx, .channels = 2, .autodma = AUTODMA, .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, @@ -323,7 +281,6 @@ static ide_pci_device_t aec62xx_chipsets[] __devinitdata = { .init_setup = init_setup_aec62xx, .init_chipset = init_chipset_aec62xx, .init_hwif = init_hwif_aec62xx, - .init_dma = init_dma_aec62xx, .channels = 2, .autodma = NOAUTODMA, .bootable = OFF_BOARD, @@ -333,28 +290,25 @@ static ide_pci_device_t aec62xx_chipsets[] __devinitdata = { .init_setup = init_setup_aec62xx, .init_chipset = init_chipset_aec62xx, .init_hwif = init_hwif_aec62xx, - .init_dma = init_dma_aec62xx, .channels = 2, .autodma = AUTODMA, .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, .bootable = NEVER_BOARD, .udma_mask = 0x1f, /* udma0-4 */ },{ /* 3 */ - .name = "AEC6X80", + .name = "AEC6280", .init_setup = init_setup_aec6x80, .init_chipset = init_chipset_aec62xx, .init_hwif = init_hwif_aec62xx, - .init_dma = init_dma_aec62xx, .channels = 2, .autodma = AUTODMA, .bootable = OFF_BOARD, .udma_mask = 0x3f, /* udma0-5 */ },{ /* 4 */ - .name = "AEC6X80R", + .name = "AEC6280R", .init_setup = init_setup_aec6x80, .init_chipset = init_chipset_aec62xx, .init_hwif = init_hwif_aec62xx, - .init_dma = init_dma_aec62xx, .channels = 2, .autodma = AUTODMA, .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, @@ -370,13 +324,16 @@ static ide_pci_device_t aec62xx_chipsets[] __devinitdata = { * * Called when the PCI registration layer (or the IDE initialization) * finds a device matching our IDE device tables. + * + * NOTE: since we're going to modify the 'name' field for AEC-6[26]80[R] + * chips, pass a local copy of 'struct pci_device_id' down the call chain. */ static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - ide_pci_device_t *d = &aec62xx_chipsets[id->driver_data]; + ide_pci_device_t d = aec62xx_chipsets[id->driver_data]; - return d->init_setup(dev, d); + return d.init_setup(dev, &d); } static struct pci_device_id aec62xx_pci_tbl[] = { diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index 27525ec2e19..ba0fb92b041 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/alim15x3.c Version 0.21 2007/02/03 + * linux/drivers/ide/pci/alim15x3.c Version 0.25 Jun 9 2007 * * Copyright (C) 1998-2000 Michel Aubry, Maintainer * Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer @@ -10,6 +10,7 @@ * Copyright (C) 2002 Alan Cox <alan@redhat.com> * ALi (now ULi M5228) support by Clear Zhang <Clear.Zhang@ali.com.tw> * Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com> + * Copyright (C) 2007 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> * * (U)DMA capable version of ali 1533/1543(C), 1535(D) * @@ -36,6 +37,7 @@ #include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> +#include <linux/dmi.h> #include <asm/io.h> @@ -506,7 +508,7 @@ static unsigned int __devinit init_chipset_ali15x3 (struct pci_dev *dev, const c u8 tmpbyte; struct pci_dev *north = pci_get_slot(dev->bus, PCI_DEVFN(0,0)); - pci_read_config_byte(dev, PCI_REVISION_ID, &m5229_revision); + m5229_revision = dev->revision; isa_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL); @@ -583,6 +585,35 @@ out: return 0; } +/* + * Cable special cases + */ + +static struct dmi_system_id cable_dmi_table[] = { + { + .ident = "HP Pavilion N5430", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_BOARD_NAME, "OmniBook N32N-736"), + }, + }, + { } +}; + +static int ali_cable_override(struct pci_dev *pdev) +{ + /* Fujitsu P2000 */ + if (pdev->subsystem_vendor == 0x10CF && + pdev->subsystem_device == 0x10AF) + return 1; + + /* Systems by DMI */ + if (dmi_check_system(cable_dmi_table)) + return 1; + + return 0; +} + /** * ata66_ali15x3 - check for UDMA 66 support * @hwif: IDE interface @@ -594,37 +625,31 @@ out: * FIXME: frobs bits that are not defined on newer ALi devicea */ -static unsigned int __devinit ata66_ali15x3 (ide_hwif_t *hwif) +static u8 __devinit ata66_ali15x3(ide_hwif_t *hwif) { struct pci_dev *dev = hwif->pci_dev; - unsigned int ata66 = 0; - u8 cable_80_pin[2] = { 0, 0 }; - unsigned long flags; - u8 tmpbyte; + u8 cbl = ATA_CBL_PATA40, tmpbyte; local_irq_save(flags); if (m5229_revision >= 0xC2) { /* - * Ultra66 cable detection (from Host View) - * m5229, 0x4a, bit0: primary, bit1: secondary 80 pin - */ - pci_read_config_byte(dev, 0x4a, &tmpbyte); - /* - * 0x4a, bit0 is 0 => primary channel - * has 80-pin (from host view) - */ - if (!(tmpbyte & 0x01)) cable_80_pin[0] = 1; - /* - * 0x4a, bit1 is 0 => secondary channel - * has 80-pin (from host view) - */ - if (!(tmpbyte & 0x02)) cable_80_pin[1] = 1; - /* - * Allow ata66 if cable of current channel has 80 pins + * m5229 80-pin cable detection (from Host View) + * + * 0x4a bit0 is 0 => primary channel has 80-pin + * 0x4a bit1 is 0 => secondary channel has 80-pin + * + * Certain laptops use short but suitable cables + * and don't implement the detect logic. */ - ata66 = (hwif->channel)?cable_80_pin[1]:cable_80_pin[0]; + if (ali_cable_override(dev)) + cbl = ATA_CBL_PATA40_SHORT; + else { + pci_read_config_byte(dev, 0x4a, &tmpbyte); + if ((tmpbyte & (1 << hwif->channel)) == 0) + cbl = ATA_CBL_PATA80; + } } else { /* * check m1533, 0x5e, bit 1~4 == 1001 => & 00011110 = 00010010 @@ -657,7 +682,7 @@ static unsigned int __devinit ata66_ali15x3 (ide_hwif_t *hwif) local_irq_restore(flags); - return(ata66); + return cbl; } /** @@ -708,8 +733,9 @@ static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif) hwif->dma_setup = &ali15x3_dma_setup; if (!noautodma) hwif->autodma = 1; - if (!(hwif->udma_four)) - hwif->udma_four = ata66_ali15x3(hwif); + + if (hwif->cbl != ATA_CBL_PATA40_SHORT) + hwif->cbl = ata66_ali15x3(hwif); } hwif->drives[0].autodma = hwif->autodma; hwif->drives[1].autodma = hwif->autodma; diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index a2be65fcf89..8d30b99a54d 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -1,10 +1,11 @@ /* - * Version 2.16 + * Version 2.20 * * AMD 755/756/766/8111 and nVidia nForce/2/2s/3/3s/CK804/MCP04 * IDE driver for Linux. * * Copyright (c) 2000-2002 Vojtech Pavlik + * Copyright (c) 2007 Bartlomiej Zolnierkiewicz * * Based on the work of: * Andre Hedrick @@ -37,11 +38,6 @@ #define AMD_ADDRESS_SETUP (0x0c + amd_config->base) #define AMD_UDMA_TIMING (0x10 + amd_config->base) -#define AMD_UDMA 0x07 -#define AMD_UDMA_33 0x01 -#define AMD_UDMA_66 0x02 -#define AMD_UDMA_100 0x03 -#define AMD_UDMA_133 0x04 #define AMD_CHECK_SWDMA 0x08 #define AMD_BAD_SWDMA 0x10 #define AMD_BAD_FIFO 0x20 @@ -53,32 +49,33 @@ static struct amd_ide_chip { unsigned short id; - unsigned long base; - unsigned char flags; + u8 base; + u8 udma_mask; + u8 flags; } amd_ide_chips[] = { - { PCI_DEVICE_ID_AMD_COBRA_7401, 0x40, AMD_UDMA_33 | AMD_BAD_SWDMA }, - { PCI_DEVICE_ID_AMD_VIPER_7409, 0x40, AMD_UDMA_66 | AMD_CHECK_SWDMA }, - { PCI_DEVICE_ID_AMD_VIPER_7411, 0x40, AMD_UDMA_100 | AMD_BAD_FIFO }, - { PCI_DEVICE_ID_AMD_OPUS_7441, 0x40, AMD_UDMA_100 }, - { PCI_DEVICE_ID_AMD_8111_IDE, 0x40, AMD_UDMA_133 | AMD_CHECK_SERENADE }, - { PCI_DEVICE_ID_NVIDIA_NFORCE_IDE, 0x50, AMD_UDMA_100 }, - { PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE, 0x50, AMD_UDMA_133 }, - { PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE, 0x50, AMD_UDMA_133 }, - { PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA, 0x50, AMD_UDMA_133 }, - { PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE, 0x50, AMD_UDMA_133 }, - { PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE, 0x50, AMD_UDMA_133 }, - { PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA, 0x50, AMD_UDMA_133 }, - { PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2, 0x50, AMD_UDMA_133 }, - { PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE, 0x50, AMD_UDMA_133 }, - { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE, 0x50, AMD_UDMA_133 }, - { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE, 0x50, AMD_UDMA_133 }, - { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE, 0x50, AMD_UDMA_133 }, - { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE, 0x50, AMD_UDMA_133 }, - { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE, 0x50, AMD_UDMA_133 }, - { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE, 0x50, AMD_UDMA_133 }, - { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE, 0x50, AMD_UDMA_133 }, - { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE, 0x50, AMD_UDMA_133 }, - { PCI_DEVICE_ID_AMD_CS5536_IDE, 0x40, AMD_UDMA_100 }, + { PCI_DEVICE_ID_AMD_COBRA_7401, 0x40, ATA_UDMA2, AMD_BAD_SWDMA }, + { PCI_DEVICE_ID_AMD_VIPER_7409, 0x40, ATA_UDMA4, AMD_CHECK_SWDMA }, + { PCI_DEVICE_ID_AMD_VIPER_7411, 0x40, ATA_UDMA5, AMD_BAD_FIFO }, + { PCI_DEVICE_ID_AMD_OPUS_7441, 0x40, ATA_UDMA5, }, + { PCI_DEVICE_ID_AMD_8111_IDE, 0x40, ATA_UDMA6, AMD_CHECK_SERENADE }, + { PCI_DEVICE_ID_NVIDIA_NFORCE_IDE, 0x50, ATA_UDMA5, }, + { PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE, 0x50, ATA_UDMA6, }, + { PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE, 0x50, ATA_UDMA6, }, + { PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA, 0x50, ATA_UDMA6, }, + { PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE, 0x50, ATA_UDMA6, }, + { PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE, 0x50, ATA_UDMA6, }, + { PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA, 0x50, ATA_UDMA6, }, + { PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2, 0x50, ATA_UDMA6, }, + { PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE, 0x50, ATA_UDMA6, }, + { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE, 0x50, ATA_UDMA6, }, + { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE, 0x50, ATA_UDMA6, }, + { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE, 0x50, ATA_UDMA6, }, + { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE, 0x50, ATA_UDMA6, }, + { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE, 0x50, ATA_UDMA6, }, + { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE, 0x50, ATA_UDMA6, }, + { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE, 0x50, ATA_UDMA6, }, + { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE, 0x50, ATA_UDMA6, }, + { PCI_DEVICE_ID_AMD_CS5536_IDE, 0x40, ATA_UDMA5, }, { 0 } }; @@ -87,7 +84,7 @@ static ide_pci_device_t *amd_chipset; static unsigned int amd_80w; static unsigned int amd_clock; -static char *amd_dma[] = { "MWDMA16", "UDMA33", "UDMA66", "UDMA100", "UDMA133" }; +static char *amd_dma[] = { "16", "25", "33", "44", "66", "100", "133" }; static unsigned char amd_cyc2udma[] = { 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3, 3, 3, 3, 3, 7 }; /* @@ -126,9 +123,8 @@ static int amd74xx_get_info(char *buffer, char **addr, off_t offset, int count) amd_print("Driver Version: 2.13"); amd_print("South Bridge: %s", pci_name(bmide_dev)); - pci_read_config_byte(dev, PCI_REVISION_ID, &t); - amd_print("Revision: IDE %#x", t); - amd_print("Highest DMA rate: %s", amd_dma[amd_config->flags & AMD_UDMA]); + amd_print("Revision: IDE %#x", dev->revision); + amd_print("Highest DMA rate: UDMA%s", amd_dma[fls(amd_config->udma_mask) - 1]); amd_print("BM-DMA base: %#lx", amd_base); amd_print("PCI clock: %d.%dMHz", amd_clock / 1000, amd_clock / 100 % 10); @@ -221,12 +217,12 @@ static void amd_set_speed(struct pci_dev *dev, unsigned char dn, struct ide_timi pci_write_config_byte(dev, AMD_DRIVE_TIMING + (3 - dn), ((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1)); - switch (amd_config->flags & AMD_UDMA) { - case AMD_UDMA_33: t = timing->udma ? (0xc0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break; - case AMD_UDMA_66: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 2, 10)]) : 0x03; break; - case AMD_UDMA_100: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 10)]) : 0x03; break; - case AMD_UDMA_133: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 15)]) : 0x03; break; - default: return; + switch (amd_config->udma_mask) { + case ATA_UDMA2: t = timing->udma ? (0xc0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break; + case ATA_UDMA4: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 2, 10)]) : 0x03; break; + case ATA_UDMA5: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 10)]) : 0x03; break; + case ATA_UDMA6: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 15)]) : 0x03; break; + default: return; } pci_write_config_byte(dev, AMD_UDMA_TIMING + (3 - dn), t); @@ -248,7 +244,7 @@ static int amd_set_drive(ide_drive_t *drive, u8 speed) ide_config_drive_speed(drive, speed); T = 1000000000 / amd_clock; - UT = T / min_t(int, max_t(int, amd_config->flags & AMD_UDMA, 1), 2); + UT = (amd_config->udma_mask == ATA_UDMA2) ? T : (T / 2); ide_timing_compute(drive, speed, &t, T, UT); @@ -277,29 +273,19 @@ static int amd_set_drive(ide_drive_t *drive, u8 speed) static void amd74xx_tune_drive(ide_drive_t *drive, u8 pio) { if (pio == 255) { - amd_set_drive(drive, ide_find_best_mode(drive, XFER_PIO | XFER_EPIO)); + amd_set_drive(drive, ide_find_best_pio_mode(drive)); return; } amd_set_drive(drive, XFER_PIO_0 + min_t(byte, pio, 5)); } -/* - * amd74xx_dmaproc() is a callback from upper layers that can do - * a lot, but we use it for DMA/PIO tuning only, delegating everything - * else to the default ide_dmaproc(). - */ - static int amd74xx_ide_dma_check(ide_drive_t *drive) { - int w80 = HWIF(drive)->udma_four; + u8 speed = ide_max_dma_mode(drive); - u8 speed = ide_find_best_mode(drive, - XFER_PIO | XFER_EPIO | XFER_MWDMA | XFER_UDMA | - ((amd_config->flags & AMD_BAD_SWDMA) ? 0 : XFER_SWDMA) | - (w80 && (amd_config->flags & AMD_UDMA) >= AMD_UDMA_66 ? XFER_UDMA_66 : 0) | - (w80 && (amd_config->flags & AMD_UDMA) >= AMD_UDMA_100 ? XFER_UDMA_100 : 0) | - (w80 && (amd_config->flags & AMD_UDMA) >= AMD_UDMA_133 ? XFER_UDMA_133 : 0)); + if (speed == 0) + speed = ide_find_best_pio_mode(drive); amd_set_drive(drive, speed); @@ -325,8 +311,7 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, const ch */ if (amd_config->flags & AMD_CHECK_SWDMA) { - pci_read_config_byte(dev, PCI_REVISION_ID, &t); - if (t <= 7) + if (dev->revision <= 7) amd_config->flags |= AMD_BAD_SWDMA; } @@ -334,10 +319,10 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, const ch * Check 80-wire cable presence. */ - switch (amd_config->flags & AMD_UDMA) { + switch (amd_config->udma_mask) { - case AMD_UDMA_133: - case AMD_UDMA_100: + case ATA_UDMA6: + case ATA_UDMA5: pci_read_config_byte(dev, AMD_CABLE_DETECT, &t); pci_read_config_dword(dev, AMD_UDMA_TIMING, &u); amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0); @@ -349,7 +334,7 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, const ch } break; - case AMD_UDMA_66: + case ATA_UDMA4: /* no host side cable detection */ amd_80w = 0x03; break; @@ -370,7 +355,7 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, const ch if ((amd_config->flags & AMD_CHECK_SERENADE) && dev->subsystem_vendor == PCI_VENDOR_ID_AMD && dev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE) - amd_config->flags = AMD_UDMA_100; + amd_config->udma_mask = ATA_UDMA5; /* * Determine the system bus clock. @@ -395,8 +380,9 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, const ch */ pci_read_config_byte(dev, PCI_REVISION_ID, &t); - printk(KERN_INFO "%s: %s (rev %02x) %s controller\n", - amd_chipset->name, pci_name(dev), t, amd_dma[amd_config->flags & AMD_UDMA]); + printk(KERN_INFO "%s: %s (rev %02x) UDMA%s controller\n", + amd_chipset->name, pci_name(dev), dev->revision, + amd_dma[fls(amd_config->udma_mask) - 1]); /* * Register /proc/ide/amd74xx entry @@ -437,12 +423,19 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif) return; hwif->atapi_dma = 1; - hwif->ultra_mask = 0x7f; - hwif->mwdma_mask = 0x07; - hwif->swdma_mask = 0x07; - if (!hwif->udma_four) - hwif->udma_four = (amd_80w >> hwif->channel) & 1; + hwif->ultra_mask = amd_config->udma_mask; + hwif->mwdma_mask = 0x07; + if ((amd_config->flags & AMD_BAD_SWDMA) == 0) + hwif->swdma_mask = 0x07; + + if (hwif->cbl != ATA_CBL_PATA40_SHORT) { + if ((amd_80w >> hwif->channel) & 1) + hwif->cbl = ATA_CBL_PATA80; + else + hwif->cbl = ATA_CBL_PATA40; + } + hwif->ide_dma_check = &amd74xx_ide_dma_check; if (!noautodma) hwif->autodma = 1; diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c index 8ab33faf6f7..2761510309b 100644 --- a/drivers/ide/pci/atiixp.c +++ b/drivers/ide/pci/atiixp.c @@ -264,10 +264,11 @@ static void __devinit init_hwif_atiixp(ide_hwif_t *hwif) hwif->swdma_mask = 0x04; pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ch, &udma_mode); + if ((udma_mode & 0x07) >= 0x04 || (udma_mode & 0x70) >= 0x40) - hwif->udma_four = 1; + hwif->cbl = ATA_CBL_PATA80; else - hwif->udma_four = 0; + hwif->cbl = ATA_CBL_PATA40; hwif->dma_host_on = &atiixp_dma_host_on; hwif->dma_host_off = &atiixp_dma_host_off; diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c index 7c57dc696f5..1e89dd6e5bb 100644 --- a/drivers/ide/pci/cmd64x.c +++ b/drivers/ide/pci/cmd64x.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/cmd64x.c Version 1.47 Mar 19, 2007 + * linux/drivers/ide/pci/cmd64x.c Version 1.50 May 10, 2007 * * cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines. * Due to massive hardware bugs, UltraDMA is only supported @@ -52,9 +52,6 @@ #define ARTTIM23_DIS_RA2 0x04 #define ARTTIM23_DIS_RA3 0x08 #define ARTTIM23_INTR_CH1 0x10 -#define ARTTIM2 0x57 -#define ARTTIM3 0x57 -#define DRWTIM23 0x58 #define DRWTIM2 0x58 #define BRST 0x59 #define DRWTIM3 0x5b @@ -91,7 +88,6 @@ static char * print_cmd64x_get_info (char *buf, struct pci_dev *dev, int index) u8 reg72 = 0, reg73 = 0; /* primary */ u8 reg7a = 0, reg7b = 0; /* secondary */ u8 reg50 = 1, reg51 = 1, reg57 = 0, reg71 = 0; /* extra */ - u8 rev = 0; p += sprintf(p, "\nController: %d\n", index); p += sprintf(p, "PCI-%x Chipset.\n", dev->device); @@ -106,9 +102,8 @@ static char * print_cmd64x_get_info (char *buf, struct pci_dev *dev, int index) (void) pci_read_config_byte(dev, UDIDETCR1, ®7b); /* PCI0643/6 originally didn't have the primary channel enable bit */ - (void) pci_read_config_byte(dev, PCI_REVISION_ID, &rev); if ((dev->device == PCI_DEVICE_ID_CMD_643) || - (dev->device == PCI_DEVICE_ID_CMD_646 && rev < 3)) + (dev->device == PCI_DEVICE_ID_CMD_646 && dev->revision < 3)) reg51 |= CNTRL_ENA_1ST; p += sprintf(p, "---------------- Primary Channel " @@ -469,71 +464,43 @@ static int cmd646_1_ide_dma_end (ide_drive_t *drive) static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev, const char *name) { - u32 class_rev = 0; u8 mrdmode = 0; - pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); - class_rev &= 0xff; + if (dev->device == PCI_DEVICE_ID_CMD_646) { + u8 rev = 0; - switch(dev->device) { - case PCI_DEVICE_ID_CMD_643: - break; - case PCI_DEVICE_ID_CMD_646: - printk(KERN_INFO "%s: chipset revision 0x%02X, ", name, class_rev); - switch(class_rev) { - case 0x07: - case 0x05: - printk("UltraDMA Capable"); - break; - case 0x03: - printk("MultiWord DMA Force Limited"); - break; - case 0x01: - default: - printk("MultiWord DMA Limited, IRQ workaround enabled"); - break; - } - printk("\n"); - break; - case PCI_DEVICE_ID_CMD_648: - case PCI_DEVICE_ID_CMD_649: + pci_read_config_byte(dev, PCI_REVISION_ID, &rev); + + switch (rev) { + case 0x07: + case 0x05: + printk("%s: UltraDMA capable", name); break; + case 0x03: default: + printk("%s: MultiWord DMA force limited", name); + break; + case 0x01: + printk("%s: MultiWord DMA limited, " + "IRQ workaround enabled\n", name); break; + } } /* Set a good latency timer and cache line size value. */ (void) pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64); /* FIXME: pci_set_master() to ensure a good latency timer value */ - /* Setup interrupts. */ - (void) pci_read_config_byte(dev, MRDMODE, &mrdmode); - mrdmode &= ~(0x30); - (void) pci_write_config_byte(dev, MRDMODE, mrdmode); - - /* Use MEMORY READ LINE for reads. - * NOTE: Although not mentioned in the PCI0646U specs, - * these bits are write only and won't be read - * back as set or not. The PCI0646U2 specs clarify - * this point. + /* + * Enable interrupts, select MEMORY READ LINE for reads. + * + * NOTE: although not mentioned in the PCI0646U specs, + * bits 0-1 are write only and won't be read back as + * set or not -- PCI0646U2 specs clarify this point. */ - (void) pci_write_config_byte(dev, MRDMODE, mrdmode | 0x02); - - /* Set reasonable active/recovery/address-setup values. */ - (void) pci_write_config_byte(dev, ARTTIM0, 0x40); - (void) pci_write_config_byte(dev, DRWTIM0, 0x3f); - (void) pci_write_config_byte(dev, ARTTIM1, 0x40); - (void) pci_write_config_byte(dev, DRWTIM1, 0x3f); -#ifdef __i386__ - (void) pci_write_config_byte(dev, ARTTIM23, 0x1c); -#else - (void) pci_write_config_byte(dev, ARTTIM23, 0x5c); -#endif - (void) pci_write_config_byte(dev, DRWTIM23, 0x3f); - (void) pci_write_config_byte(dev, DRWTIM3, 0x3f); -#ifdef CONFIG_PPC - (void) pci_write_config_byte(dev, UDIDETCR0, 0xf0); -#endif /* CONFIG_PPC */ + (void) pci_read_config_byte (dev, MRDMODE, &mrdmode); + mrdmode &= ~0x30; + (void) pci_write_config_byte(dev, MRDMODE, (mrdmode | 0x02)); #if defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_IDE_PROC_FS) @@ -548,29 +515,27 @@ static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev, const cha return 0; } -static unsigned int __devinit ata66_cmd64x(ide_hwif_t *hwif) +static u8 __devinit ata66_cmd64x(ide_hwif_t *hwif) { - u8 ata66 = 0, mask = (hwif->channel) ? 0x02 : 0x01; + struct pci_dev *dev = hwif->pci_dev; + u8 bmidecsr = 0, mask = hwif->channel ? 0x02 : 0x01; - switch(hwif->pci_dev->device) { - case PCI_DEVICE_ID_CMD_643: - case PCI_DEVICE_ID_CMD_646: - return ata66; - default: - break; + switch (dev->device) { + case PCI_DEVICE_ID_CMD_648: + case PCI_DEVICE_ID_CMD_649: + pci_read_config_byte(dev, BMIDECSR, &bmidecsr); + return (bmidecsr & mask) ? ATA_CBL_PATA80 : ATA_CBL_PATA40; + default: + return ATA_CBL_PATA40; } - pci_read_config_byte(hwif->pci_dev, BMIDECSR, &ata66); - return (ata66 & mask) ? 1 : 0; } static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif) { struct pci_dev *dev = hwif->pci_dev; - unsigned int class_rev; + u8 rev = 0; - hwif->autodma = 0; - pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); - class_rev &= 0xff; + pci_read_config_byte(dev, PCI_REVISION_ID, &rev); hwif->tuneproc = &cmd64x_tune_drive; hwif->speedproc = &cmd64x_tune_chipset; @@ -580,8 +545,8 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif) if (!hwif->dma_base) return; - hwif->atapi_dma = 1; - + hwif->atapi_dma = 1; + hwif->mwdma_mask = 0x07; hwif->ultra_mask = hwif->cds->udma_mask; /* @@ -596,16 +561,15 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif) * * So we only do UltraDMA on revision 0x05 and 0x07 chipsets. */ - if (dev->device == PCI_DEVICE_ID_CMD_646 && class_rev < 5) + if (dev->device == PCI_DEVICE_ID_CMD_646 && rev < 5) hwif->ultra_mask = 0x00; - hwif->mwdma_mask = 0x07; - hwif->ide_dma_check = &cmd64x_config_drive_for_dma; - if (!(hwif->udma_four)) - hwif->udma_four = ata66_cmd64x(hwif); - switch(dev->device) { + if (hwif->cbl != ATA_CBL_PATA40_SHORT) + hwif->cbl = ata66_cmd64x(hwif); + + switch (dev->device) { case PCI_DEVICE_ID_CMD_648: case PCI_DEVICE_ID_CMD_649: alt_irq_bits: @@ -614,10 +578,10 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif) break; case PCI_DEVICE_ID_CMD_646: hwif->chipset = ide_cmd646; - if (class_rev == 0x01) { + if (rev == 0x01) { hwif->ide_dma_end = &cmd646_1_ide_dma_end; break; - } else if (class_rev >= 0x03) + } else if (rev >= 0x03) goto alt_irq_bits; /* fall thru */ default: @@ -626,11 +590,9 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif) break; } - if (!noautodma) hwif->autodma = 1; - hwif->drives[0].autodma = hwif->autodma; - hwif->drives[1].autodma = hwif->autodma; + hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma; } static int __devinit init_setup_cmd64x(struct pci_dev *dev, ide_pci_device_t *d) @@ -640,14 +602,11 @@ static int __devinit init_setup_cmd64x(struct pci_dev *dev, ide_pci_device_t *d) static int __devinit init_setup_cmd646(struct pci_dev *dev, ide_pci_device_t *d) { - u8 rev = 0; - /* * The original PCI0646 didn't have the primary channel enable bit, * it appeared starting with PCI0646U (i.e. revision ID 3). */ - pci_read_config_byte(dev, PCI_REVISION_ID, &rev); - if (rev < 3) + if (dev->revision < 3) d->enablebits[0].reg = 0; return ide_setup_pci_device(dev, d); diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c index 1eec1f308d1..b5c00d15a70 100644 --- a/drivers/ide/pci/cs5530.c +++ b/drivers/ide/pci/cs5530.c @@ -236,7 +236,7 @@ static unsigned int __devinit init_chipset_cs5530 (struct pci_dev *dev, const ch */ pci_set_master(cs5530_0); - pci_set_mwi(cs5530_0); + pci_try_set_mwi(cs5530_0); /* * Set PCI CacheLineSize to 16-bytes: diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c index 41925c47ef0..10f61f38243 100644 --- a/drivers/ide/pci/cs5535.c +++ b/drivers/ide/pci/cs5535.c @@ -187,7 +187,8 @@ static u8 __devinit cs5535_cable_detect(struct pci_dev *dev) /* if a 80 wire cable was detected */ pci_read_config_byte(dev, CS5535_CABLE_DETECT, &bit); - return (bit & 1); + + return (bit & 1) ? ATA_CBL_PATA80 : ATA_CBL_PATA40; } /**** @@ -212,8 +213,7 @@ static void __devinit init_hwif_cs5535(ide_hwif_t *hwif) hwif->ultra_mask = 0x1F; hwif->mwdma_mask = 0x07; - - hwif->udma_four = cs5535_cable_detect(hwif->pci_dev); + hwif->cbl = cs5535_cable_detect(hwif->pci_dev); if (!noautodma) hwif->autodma = 1; diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index c33d0b0f11c..e9b07a97c34 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/hpt366.c Version 1.06 Jun 27, 2007 + * linux/drivers/ide/pci/hpt366.c Version 1.10 Jun 29, 2007 * * Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org> * Portions Copyright (C) 2001 Sun Microsystems, Inc. @@ -77,7 +77,7 @@ * since they may tamper with its fields * - prefix the driver startup messages with the real chip name * - claim the extra 240 bytes of I/O space for all chips - * - optimize the rate masking/filtering and the drive list lookup code + * - optimize the UltraDMA filtering and the drive list lookup code * - use pci_get_slot() to get to the function 1 of HPT36x/374 * - cache offset of the channel's misc. control registers (MCRs) being used * throughout the driver @@ -99,9 +99,9 @@ * stop duplicating it for each channel by storing the pointer in the pci_dev * structure: first, at the init_setup stage, point it to a static "template" * with only the chip type and its specific base DPLL frequency, the highest - * supported DMA mode, and the chip settings table pointer filled, then, at - * the init_chipset stage, allocate per-chip instance and fill it with the - * rest of the necessary information + * UltraDMA mode, and the chip settings table pointer filled, then, at the + * init_chipset stage, allocate per-chip instance and fill it with the rest + * of the necessary information * - get rid of the constant thresholds in the HPT37x PCI clock detection code, * switch to calculating PCI clock frequency based on the chip's base DPLL * frequency @@ -112,6 +112,7 @@ * also fixing the interchanged 25/40 MHz PCI clock cases for HPT36x chips; * unify HPT36x/37x timing setup code and the speedproc handlers by joining * the register setting lists into the table indexed by the clock selected + * - set the correct hwif->ultra_mask for each individual chip * Sergei Shtylyov, <sshtylyov@ru.mvista.com> or <source@mvista.com> */ @@ -391,7 +392,7 @@ enum ata_clock { struct hpt_info { u8 chip_type; /* Chip type */ - u8 max_mode; /* Speeds allowed */ + u8 max_ultra; /* Max. UltraDMA mode allowed */ u8 dpll_clk; /* DPLL clock in MHz */ u8 pci_clk; /* PCI clock in MHz */ u32 **settings; /* Chipset settings table */ @@ -430,77 +431,77 @@ static u32 *hpt37x_settings[NUM_ATA_CLOCKS] = { static struct hpt_info hpt36x __devinitdata = { .chip_type = HPT36x, - .max_mode = (HPT366_ALLOW_ATA66_4 || HPT366_ALLOW_ATA66_3) ? 2 : 1, + .max_ultra = HPT366_ALLOW_ATA66_3 ? (HPT366_ALLOW_ATA66_4 ? 4 : 3) : 2, .dpll_clk = 0, /* no DPLL */ .settings = hpt36x_settings }; static struct hpt_info hpt370 __devinitdata = { .chip_type = HPT370, - .max_mode = HPT370_ALLOW_ATA100_5 ? 3 : 2, + .max_ultra = HPT370_ALLOW_ATA100_5 ? 5 : 4, .dpll_clk = 48, .settings = hpt37x_settings }; static struct hpt_info hpt370a __devinitdata = { .chip_type = HPT370A, - .max_mode = HPT370_ALLOW_ATA100_5 ? 3 : 2, + .max_ultra = HPT370_ALLOW_ATA100_5 ? 5 : 4, .dpll_clk = 48, .settings = hpt37x_settings }; static struct hpt_info hpt374 __devinitdata = { .chip_type = HPT374, - .max_mode = 3, + .max_ultra = 5, .dpll_clk = 48, .settings = hpt37x_settings }; static struct hpt_info hpt372 __devinitdata = { .chip_type = HPT372, - .max_mode = HPT372_ALLOW_ATA133_6 ? 4 : 3, + .max_ultra = HPT372_ALLOW_ATA133_6 ? 6 : 5, .dpll_clk = 55, .settings = hpt37x_settings }; static struct hpt_info hpt372a __devinitdata = { .chip_type = HPT372A, - .max_mode = HPT372_ALLOW_ATA133_6 ? 4 : 3, + .max_ultra = HPT372_ALLOW_ATA133_6 ? 6 : 5, .dpll_clk = 66, .settings = hpt37x_settings }; static struct hpt_info hpt302 __devinitdata = { .chip_type = HPT302, - .max_mode = HPT302_ALLOW_ATA133_6 ? 4 : 3, + .max_ultra = HPT372_ALLOW_ATA133_6 ? 6 : 5, .dpll_clk = 66, .settings = hpt37x_settings }; static struct hpt_info hpt371 __devinitdata = { .chip_type = HPT371, - .max_mode = HPT371_ALLOW_ATA133_6 ? 4 : 3, + .max_ultra = HPT371_ALLOW_ATA133_6 ? 6 : 5, .dpll_clk = 66, .settings = hpt37x_settings }; static struct hpt_info hpt372n __devinitdata = { .chip_type = HPT372N, - .max_mode = HPT372_ALLOW_ATA133_6 ? 4 : 3, + .max_ultra = HPT372_ALLOW_ATA133_6 ? 6 : 5, .dpll_clk = 77, .settings = hpt37x_settings }; static struct hpt_info hpt302n __devinitdata = { .chip_type = HPT302N, - .max_mode = HPT302_ALLOW_ATA133_6 ? 4 : 3, + .max_ultra = HPT302_ALLOW_ATA133_6 ? 6 : 5, .dpll_clk = 77, .settings = hpt37x_settings }; static struct hpt_info hpt371n __devinitdata = { .chip_type = HPT371N, - .max_mode = HPT371_ALLOW_ATA133_6 ? 4 : 3, + .max_ultra = HPT371_ALLOW_ATA133_6 ? 6 : 5, .dpll_clk = 77, .settings = hpt37x_settings }; @@ -523,53 +524,38 @@ static int check_in_drive_list(ide_drive_t *drive, const char **list) static u8 hpt3xx_udma_filter(ide_drive_t *drive) { struct hpt_info *info = pci_get_drvdata(HWIF(drive)->pci_dev); - u8 chip_type = info->chip_type; - u8 mode = info->max_mode; u8 mask; - switch (mode) { - case 0x04: - mask = 0x7f; - break; - case 0x03: + switch (info->chip_type) { + case HPT370A: + if (!HPT370_ALLOW_ATA100_5 || + check_in_drive_list(drive, bad_ata100_5)) + return 0x1f; + else + return 0x3f; + case HPT370: + if (!HPT370_ALLOW_ATA100_5 || + check_in_drive_list(drive, bad_ata100_5)) + mask = 0x1f; + else mask = 0x3f; - if (chip_type >= HPT374) - break; - if (!check_in_drive_list(drive, bad_ata100_5)) - goto check_bad_ata33; - /* fall thru */ - case 0x02: + break; + case HPT36x: + if (!HPT366_ALLOW_ATA66_4 || + check_in_drive_list(drive, bad_ata66_4)) + mask = 0x0f; + else mask = 0x1f; - /* - * CHECK ME, Does this need to be changed to HPT374 ?? - */ - if (chip_type >= HPT370) - goto check_bad_ata33; - if (HPT366_ALLOW_ATA66_4 && - !check_in_drive_list(drive, bad_ata66_4)) - goto check_bad_ata33; - - mask = 0x0f; - if (HPT366_ALLOW_ATA66_3 && - !check_in_drive_list(drive, bad_ata66_3)) - goto check_bad_ata33; - /* fall thru */ - case 0x01: + if (!HPT366_ALLOW_ATA66_3 || + check_in_drive_list(drive, bad_ata66_3)) mask = 0x07; - - check_bad_ata33: - if (chip_type >= HPT370A) - break; - if (!check_in_drive_list(drive, bad_ata33)) - break; - /* fall thru */ - case 0x00: - default: - mask = 0x00; - break; + break; + default: + return 0x7f; } - return mask; + + return check_in_drive_list(drive, bad_ata33) ? 0x00 : mask; } static u32 get_speed_setting(u8 speed, struct hpt_info *info) @@ -737,7 +723,7 @@ static int hpt366_config_drive_xfer_rate(ide_drive_t *drive) * This is specific to the HPT366 UDMA chipset * by HighPoint|Triones Technologies, Inc. */ -static int hpt366_ide_dma_lostirq(ide_drive_t *drive) +static void hpt366_dma_lost_irq(ide_drive_t *drive) { struct pci_dev *dev = HWIF(drive)->pci_dev; u8 mcr1 = 0, mcr3 = 0, scr1 = 0; @@ -749,7 +735,7 @@ static int hpt366_ide_dma_lostirq(ide_drive_t *drive) drive->name, __FUNCTION__, mcr1, mcr3, scr1); if (scr1 & 0x10) pci_write_config_byte(dev, 0x5a, scr1 & ~0x10); - return __ide_dma_lostirq(drive); + ide_dma_lost_irq(drive); } static void hpt370_clear_engine(ide_drive_t *drive) @@ -799,10 +785,10 @@ static int hpt370_ide_dma_end(ide_drive_t *drive) return __ide_dma_end(drive); } -static int hpt370_ide_dma_timeout(ide_drive_t *drive) +static void hpt370_dma_timeout(ide_drive_t *drive) { hpt370_irq_timeout(drive); - return __ide_dma_timeout(drive); + ide_dma_timeout(drive); } /* returns 1 if DMA IRQ issued, 0 otherwise */ @@ -1150,7 +1136,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha * Select 66 MHz DPLL clock only if UltraATA/133 mode is * supported/enabled, use 50 MHz DPLL clock otherwise... */ - if (info->max_mode == 0x04) { + if (info->max_ultra == 6) { dpll_clk = 66; clock = ATA_CLOCK_66MHZ; } else if (dpll_clk) { /* HPT36x chips don't have DPLL */ @@ -1243,7 +1229,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) struct pci_dev *dev = hwif->pci_dev; struct hpt_info *info = pci_get_drvdata(dev); int serialize = HPT_SERIALIZE_IO; - u8 scr1 = 0, ata66 = (hwif->channel) ? 0x01 : 0x02; + u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02; u8 chip_type = info->chip_type; u8 new_mcr, old_mcr = 0; @@ -1256,7 +1242,9 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) hwif->intrproc = &hpt3xx_intrproc; hwif->maskproc = &hpt3xx_maskproc; hwif->busproc = &hpt3xx_busproc; - hwif->udma_filter = &hpt3xx_udma_filter; + + if (chip_type <= HPT370A) + hwif->udma_filter = &hpt3xx_udma_filter; /* * HPT3xxN chips have some complications: @@ -1305,7 +1293,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) return; } - hwif->ultra_mask = 0x7f; + hwif->ultra_mask = hwif->cds->udma_mask; hwif->mwdma_mask = 0x07; /* @@ -1342,8 +1330,8 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) } else pci_read_config_byte (dev, 0x5a, &scr1); - if (!hwif->udma_four) - hwif->udma_four = (scr1 & ata66) ? 0 : 1; + if (hwif->cbl != ATA_CBL_PATA40_SHORT) + hwif->cbl = (scr1 & ata66) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; hwif->ide_dma_check = &hpt366_config_drive_xfer_rate; @@ -1353,9 +1341,9 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) } else if (chip_type >= HPT370) { hwif->dma_start = &hpt370_ide_dma_start; hwif->ide_dma_end = &hpt370_ide_dma_end; - hwif->ide_dma_timeout = &hpt370_ide_dma_timeout; + hwif->dma_timeout = &hpt370_dma_timeout; } else - hwif->ide_dma_lostirq = &hpt366_ide_dma_lostirq; + hwif->dma_lost_irq = &hpt366_dma_lost_irq; if (!noautodma) hwif->autodma = 1; @@ -1425,11 +1413,9 @@ static int __devinit init_setup_hpt372n(struct pci_dev *dev, ide_pci_device_t *d static int __devinit init_setup_hpt371(struct pci_dev *dev, ide_pci_device_t *d) { struct hpt_info *info; - u8 rev = 0, mcr1 = 0; + u8 mcr1 = 0; - pci_read_config_byte(dev, PCI_REVISION_ID, &rev); - - if (rev > 1) { + if (dev->revision > 1) { d->name = "HPT371N"; info = &hpt371n; @@ -1454,11 +1440,8 @@ static int __devinit init_setup_hpt371(struct pci_dev *dev, ide_pci_device_t *d) static int __devinit init_setup_hpt372a(struct pci_dev *dev, ide_pci_device_t *d) { struct hpt_info *info; - u8 rev = 0; - - pci_read_config_byte(dev, PCI_REVISION_ID, &rev); - if (rev > 1) { + if (dev->revision > 1) { d->name = "HPT372N"; info = &hpt372n; @@ -1472,11 +1455,8 @@ static int __devinit init_setup_hpt372a(struct pci_dev *dev, ide_pci_device_t *d static int __devinit init_setup_hpt302(struct pci_dev *dev, ide_pci_device_t *d) { struct hpt_info *info; - u8 rev = 0; - pci_read_config_byte(dev, PCI_REVISION_ID, &rev); - - if (rev > 1) { + if (dev->revision > 1) { d->name = "HPT302N"; info = &hpt302n; @@ -1490,7 +1470,7 @@ static int __devinit init_setup_hpt302(struct pci_dev *dev, ide_pci_device_t *d) static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d) { struct pci_dev *dev2; - u8 rev = 0; + u8 rev = dev->revision; static char *chipset_names[] = { "HPT366", "HPT366", "HPT368", "HPT370", "HPT370A", "HPT372", "HPT372N" }; @@ -1501,11 +1481,35 @@ static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d) if (PCI_FUNC(dev->devfn) & 1) return -ENODEV; - pci_read_config_byte(dev, PCI_REVISION_ID, &rev); + switch (rev) { + case 0: + case 1: + case 2: + /* + * HPT36x chips have one channel per function and have + * both channel enable bits located differently and visible + * to both functions -- really stupid design decision... :-( + * Bit 4 is for the primary channel, bit 5 for the secondary. + */ + d->channels = 1; + d->enablebits[0].mask = d->enablebits[0].val = 0x10; - if (rev > 6) + d->udma_mask = HPT366_ALLOW_ATA66_3 ? + (HPT366_ALLOW_ATA66_4 ? 0x1f : 0x0f) : 0x07; + break; + case 3: + case 4: + d->udma_mask = HPT370_ALLOW_ATA100_5 ? 0x3f : 0x1f; + break; + default: rev = 6; - + /* fall thru */ + case 5: + case 6: + d->udma_mask = HPT372_ALLOW_ATA133_6 ? 0x7f : 0x3f; + break; + } + d->name = chipset_names[rev]; pci_set_drvdata(dev, info[rev]); @@ -1513,15 +1517,6 @@ static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d) if (rev > 2) goto init_single; - /* - * HPT36x chips have one channel per function and have - * both channel enable bits located differently and visible - * to both functions -- really stupid design decision... :-( - * Bit 4 is for the primary channel, bit 5 for the secondary. - */ - d->channels = 1; - d->enablebits[0].mask = d->enablebits[0].val = 0x10; - if ((dev2 = pci_get_slot(dev->bus, dev->devfn + 1)) != NULL) { u8 mcr1 = 0, pin1 = 0, pin2 = 0; int ret; @@ -1573,6 +1568,7 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = { .channels = 2, .autodma = AUTODMA, .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, + .udma_mask = HPT372_ALLOW_ATA133_6 ? 0x7f : 0x3f, .bootable = OFF_BOARD, .extra = 240 },{ /* 2 */ @@ -1584,6 +1580,7 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = { .channels = 2, .autodma = AUTODMA, .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, + .udma_mask = HPT302_ALLOW_ATA133_6 ? 0x7f : 0x3f, .bootable = OFF_BOARD, .extra = 240 },{ /* 3 */ @@ -1595,6 +1592,7 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = { .channels = 2, .autodma = AUTODMA, .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, + .udma_mask = HPT371_ALLOW_ATA133_6 ? 0x7f : 0x3f, .bootable = OFF_BOARD, .extra = 240 },{ /* 4 */ @@ -1606,6 +1604,7 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = { .channels = 2, /* 4 */ .autodma = AUTODMA, .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, + .udma_mask = 0x3f, .bootable = OFF_BOARD, .extra = 240 },{ /* 5 */ @@ -1617,6 +1616,7 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = { .channels = 2, /* 4 */ .autodma = AUTODMA, .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, + .udma_mask = HPT372_ALLOW_ATA133_6 ? 0x7f : 0x3f, .bootable = OFF_BOARD, .extra = 240 } diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c index c04a02687b9..ff48c23e571 100644 --- a/drivers/ide/pci/it8213.c +++ b/drivers/ide/pci/it8213.c @@ -231,7 +231,7 @@ static int it8213_config_drive_for_dma (ide_drive_t *drive) static void __devinit init_hwif_it8213(ide_hwif_t *hwif) { - u8 reg42h = 0, ata66 = 0; + u8 reg42h = 0; hwif->speedproc = &it8213_tune_chipset; hwif->tuneproc = &it8213_tuneproc; @@ -250,11 +250,11 @@ static void __devinit init_hwif_it8213(ide_hwif_t *hwif) hwif->swdma_mask = 0x04; pci_read_config_byte(hwif->pci_dev, 0x42, ®42h); - ata66 = (reg42h & 0x02) ? 0 : 1; hwif->ide_dma_check = &it8213_config_drive_for_dma; - if (!(hwif->udma_four)) - hwif->udma_four = ata66; + + if (hwif->cbl != ATA_CBL_PATA40_SHORT) + hwif->cbl = (reg42h & 0x02) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; /* * The BIOS often doesn't set up DMA on this controller diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c index 3aeb7f1b791..8197b653ba1 100644 --- a/drivers/ide/pci/it821x.c +++ b/drivers/ide/pci/it821x.c @@ -491,10 +491,10 @@ static int it821x_config_drive_for_dma (ide_drive_t *drive) * the needed logic onboard. */ -static unsigned int __devinit ata66_it821x(ide_hwif_t *hwif) +static u8 __devinit ata66_it821x(ide_hwif_t *hwif) { /* The reference driver also only does disk side */ - return 1; + return ATA_CBL_PATA80; } /** @@ -662,8 +662,9 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif) hwif->mwdma_mask = 0x07; hwif->ide_dma_check = &it821x_config_drive_for_dma; - if (!(hwif->udma_four)) - hwif->udma_four = ata66_it821x(hwif); + + if (hwif->cbl != ATA_CBL_PATA40_SHORT) + hwif->cbl = ata66_it821x(hwif); /* * The BIOS often doesn't set up DMA on this controller diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c index 76ed2514722..a6008f63e71 100644 --- a/drivers/ide/pci/jmicron.c +++ b/drivers/ide/pci/jmicron.c @@ -25,10 +25,10 @@ typedef enum { * ata66_jmicron - Cable check * @hwif: IDE port * - * Return 1 if the cable is 80pin + * Returns the cable type. */ -static int __devinit ata66_jmicron(ide_hwif_t *hwif) +static u8 __devinit ata66_jmicron(ide_hwif_t *hwif) { struct pci_dev *pdev = hwif->pci_dev; @@ -70,16 +70,17 @@ static int __devinit ata66_jmicron(ide_hwif_t *hwif) { case PORT_PATA0: if (control & (1 << 3)) /* 40/80 pin primary */ - return 0; - return 1; + return ATA_CBL_PATA40; + return ATA_CBL_PATA80; case PORT_PATA1: if (control5 & (1 << 19)) /* 40/80 pin secondary */ - return 0; - return 1; + return ATA_CBL_PATA40; + return ATA_CBL_PATA80; case PORT_SATA: break; } - return 1; /* Avoid bogus "control reaches end of non-void function" */ + /* Avoid bogus "control reaches end of non-void function" */ + return ATA_CBL_PATA80; } static void jmicron_tuneproc (ide_drive_t *drive, byte mode_wanted) @@ -159,8 +160,9 @@ static void __devinit init_hwif_jmicron(ide_hwif_t *hwif) hwif->mwdma_mask = 0x07; hwif->ide_dma_check = &jmicron_config_drive_for_dma; - if (!(hwif->udma_four)) - hwif->udma_four = ata66_jmicron(hwif); + + if (hwif->cbl != ATA_CBL_PATA40_SHORT) + hwif->cbl = ata66_jmicron(hwif); hwif->autodma = 1; hwif->drives[0].autodma = hwif->autodma; diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c index 0765dce6948..ee5020df005 100644 --- a/drivers/ide/pci/pdc202xx_new.c +++ b/drivers/ide/pci/pdc202xx_new.c @@ -225,7 +225,10 @@ static void pdcnew_tune_drive(ide_drive_t *drive, u8 pio) static u8 pdcnew_cable_detect(ide_hwif_t *hwif) { - return get_indexed_reg(hwif, 0x0b) & 0x04; + if (get_indexed_reg(hwif, 0x0b) & 0x04) + return ATA_CBL_PATA40; + else + return ATA_CBL_PATA80; } static int pdcnew_config_drive_xfer_rate(ide_drive_t *drive) @@ -509,8 +512,8 @@ static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif) hwif->ide_dma_check = &pdcnew_config_drive_xfer_rate; - if (!hwif->udma_four) - hwif->udma_four = pdcnew_cable_detect(hwif) ? 0 : 1; + if (hwif->cbl != ATA_CBL_PATA40_SHORT) + hwif->cbl = pdcnew_cable_detect(hwif); if (!noautodma) hwif->autodma = 1; diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c index 23844687dee..41ac4a94959 100644 --- a/drivers/ide/pci/pdc202xx_old.c +++ b/drivers/ide/pci/pdc202xx_old.c @@ -152,8 +152,10 @@ static void pdc202xx_tune_drive(ide_drive_t *drive, u8 pio) static u8 pdc202xx_old_cable_detect (ide_hwif_t *hwif) { u16 CIS = 0, mask = (hwif->channel) ? (1<<11) : (1<<10); + pci_read_config_word(hwif->pci_dev, 0x50, &CIS); - return (CIS & mask) ? 1 : 0; + + return (CIS & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; } /* @@ -267,18 +269,24 @@ somebody_else: return (dma_stat & 4) == 4; /* return 1 if INTR asserted */ } -static int pdc202xx_ide_dma_lostirq(ide_drive_t *drive) +static void pdc202xx_dma_lost_irq(ide_drive_t *drive) { - if (HWIF(drive)->resetproc != NULL) - HWIF(drive)->resetproc(drive); - return __ide_dma_lostirq(drive); + ide_hwif_t *hwif = HWIF(drive); + + if (hwif->resetproc != NULL) + hwif->resetproc(drive); + + ide_dma_lost_irq(drive); } -static int pdc202xx_ide_dma_timeout(ide_drive_t *drive) +static void pdc202xx_dma_timeout(ide_drive_t *drive) { - if (HWIF(drive)->resetproc != NULL) - HWIF(drive)->resetproc(drive); - return __ide_dma_timeout(drive); + ide_hwif_t *hwif = HWIF(drive); + + if (hwif->resetproc != NULL) + hwif->resetproc(drive); + + ide_dma_timeout(drive); } static void pdc202xx_reset_host (ide_hwif_t *hwif) @@ -347,12 +355,13 @@ static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif) hwif->err_stops_fifo = 1; hwif->ide_dma_check = &pdc202xx_config_drive_xfer_rate; - hwif->ide_dma_lostirq = &pdc202xx_ide_dma_lostirq; - hwif->ide_dma_timeout = &pdc202xx_ide_dma_timeout; + hwif->dma_lost_irq = &pdc202xx_dma_lost_irq; + hwif->dma_timeout = &pdc202xx_dma_timeout; if (hwif->pci_dev->device != PCI_DEVICE_ID_PROMISE_20246) { - if (!(hwif->udma_four)) - hwif->udma_four = (pdc202xx_old_cable_detect(hwif)) ? 0 : 1; + if (hwif->cbl != ATA_CBL_PATA40_SHORT) + hwif->cbl = pdc202xx_old_cable_detect(hwif); + hwif->dma_start = &pdc202xx_old_ide_dma_start; hwif->ide_dma_end = &pdc202xx_old_ide_dma_end; } diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c index 8b219dd6302..1372c35be03 100644 --- a/drivers/ide/pci/piix.c +++ b/drivers/ide/pci/piix.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/piix.c Version 0.47 February 8, 2007 + * linux/drivers/ide/pci/piix.c Version 0.50 Jun 10, 2007 * * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> @@ -394,14 +394,45 @@ static void piix_dma_clear_irq(ide_drive_t *drive) hwif->OUTB(dma_stat, hwif->dma_status); } -static int __devinit piix_cable_detect(ide_hwif_t *hwif) +struct ich_laptop { + u16 device; + u16 subvendor; + u16 subdevice; +}; + +/* + * List of laptops that use short cables rather than 80 wire + */ + +static const struct ich_laptop ich_laptop[] = { + /* devid, subvendor, subdev */ + { 0x27DF, 0x0005, 0x0280 }, /* ICH7 on Acer 5602WLMi */ + { 0x27DF, 0x1025, 0x0110 }, /* ICH7 on Acer 3682WLMi */ + { 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */ + { 0x24CA, 0x1025, 0x0061 }, /* ICH4 on Acer Aspire 2023WLMi */ + /* end marker */ + { 0, } +}; + +static u8 __devinit piix_cable_detect(ide_hwif_t *hwif) { - struct pci_dev *dev = hwif->pci_dev; + struct pci_dev *pdev = hwif->pci_dev; + const struct ich_laptop *lap = &ich_laptop[0]; u8 reg54h = 0, mask = hwif->channel ? 0xc0 : 0x30; - pci_read_config_byte(dev, 0x54, ®54h); + /* check for specials */ + while (lap->device) { + if (lap->device == pdev->device && + lap->subvendor == pdev->subsystem_vendor && + lap->subdevice == pdev->subsystem_device) { + return ATA_CBL_PATA40_SHORT; + } + lap++; + } + + pci_read_config_byte(pdev, 0x54, ®54h); - return (reg54h & mask) ? 1 : 0; + return (reg54h & mask) ? ATA_CBL_PATA80 : ATA_CBL_PATA40; } /** @@ -444,8 +475,8 @@ static void __devinit init_hwif_piix(ide_hwif_t *hwif) hwif->swdma_mask = 0x04; if (hwif->ultra_mask & 0x78) { - if (!hwif->udma_four) - hwif->udma_four = piix_cable_detect(hwif); + if (hwif->cbl != ATA_CBL_PATA40_SHORT) + hwif->cbl = piix_cable_detect(hwif); } if (no_piix_dma) @@ -541,18 +572,16 @@ static void __devinit piix_check_450nx(void) { struct pci_dev *pdev = NULL; u16 cfg; - u8 rev; while((pdev=pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev))!=NULL) { /* Look for 450NX PXB. Check for problem configurations A PCI quirk checks bit 6 already */ - pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); pci_read_config_word(pdev, 0x41, &cfg); /* Only on the original revision: IDE DMA can hang */ - if(rev == 0x00) + if (pdev->revision == 0x00) no_piix_dma = 1; /* On all revisions below 5 PXB bus lock must be disabled for IDE */ - else if(cfg & (1<<14) && rev < 5) + else if (cfg & (1<<14) && pdev->revision < 5) no_piix_dma = 2; } if(no_piix_dma) diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c index 55bc0a32e34..7b87488e3da 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/pci/scc_pata.c @@ -716,7 +716,7 @@ static void __devinit init_hwif_scc(ide_hwif_t *hwif) hwif->atapi_dma = 1; /* we support 80c cable only. */ - hwif->udma_four = 1; + hwif->cbl = ATA_CBL_PATA80; hwif->autodma = 0; if (!noautodma) diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c index d9c4fd1ae99..ed04e0c8dd4 100644 --- a/drivers/ide/pci/serverworks.c +++ b/drivers/ide/pci/serverworks.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/serverworks.c Version 0.11 Jun 2 2007 + * linux/drivers/ide/pci/serverworks.c Version 0.20 Jun 3 2007 * * Copyright (C) 1998-2000 Michel Aubry * Copyright (C) 1998-2000 Andrzej Krzysztofowicz @@ -55,7 +55,6 @@ static const char *svwks_bad_ata100[] = { NULL }; -static u8 svwks_revision = 0; static struct pci_dev *isa_dev; static int check_in_drive_lists (ide_drive_t *drive, const char **list) @@ -71,9 +70,6 @@ static u8 svwks_udma_filter(ide_drive_t *drive) struct pci_dev *dev = HWIF(drive)->pci_dev; u8 mask = 0; - if (!svwks_revision) - pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision); - if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) return 0x1f; if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { @@ -88,9 +84,9 @@ static u8 svwks_udma_filter(ide_drive_t *drive) return 0; /* Check the OSB4 DMA33 enable bit */ return ((reg & 0x00004000) == 0x00004000) ? 0x07 : 0; - } else if (svwks_revision < SVWKS_CSB5_REVISION_NEW) { + } else if (dev->revision < SVWKS_CSB5_REVISION_NEW) { return 0x07; - } else if (svwks_revision >= SVWKS_CSB5_REVISION_NEW) { + } else if (dev->revision >= SVWKS_CSB5_REVISION_NEW) { u8 btr = 0, mode; pci_read_config_byte(dev, 0x5A, &btr); mode = btr & 0x3; @@ -151,84 +147,11 @@ static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed) if(dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4 && drive->media == ide_disk && speed >= XFER_UDMA_0) BUG(); - - pci_read_config_byte(dev, drive_pci[drive->dn], &pio_timing); - pci_read_config_byte(dev, drive_pci2[drive->dn], &dma_timing); + pci_read_config_byte(dev, (0x56|hwif->channel), &ultra_timing); pci_read_config_word(dev, 0x4A, &csb5_pio); pci_read_config_byte(dev, 0x54, &ultra_enable); - /* If we are in RAID mode (eg AMI MegaIDE) then we can't it - turns out trust the firmware configuration */ - - if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) - goto oem_setup_failed; - - /* Per Specified Design by OEM, and ASIC Architect */ - if ((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) || - (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) { - if (!drive->init_speed) { - u8 dma_stat = inb(hwif->dma_status); - - if (((ultra_enable << (7-drive->dn) & 0x80) == 0x80) && - ((dma_stat & (1<<(5+unit))) == (1<<(5+unit)))) { - drive->current_speed = drive->init_speed = XFER_UDMA_0 + udma_modes[(ultra_timing >> (4*unit)) & ~(0xF0)]; - return 0; - } else if ((dma_timing) && - ((dma_stat&(1<<(5+unit)))==(1<<(5+unit)))) { - u8 dmaspeed; - - switch (dma_timing & 0x77) { - case 0x20: - dmaspeed = XFER_MW_DMA_2; - break; - case 0x21: - dmaspeed = XFER_MW_DMA_1; - break; - case 0x77: - dmaspeed = XFER_MW_DMA_0; - break; - default: - goto dma_pio; - } - - drive->current_speed = drive->init_speed = dmaspeed; - return 0; - } -dma_pio: - if (pio_timing) { - u8 piospeed; - - switch (pio_timing & 0x7f) { - case 0x20: - piospeed = XFER_PIO_4; - break; - case 0x22: - piospeed = XFER_PIO_3; - break; - case 0x34: - piospeed = XFER_PIO_2; - break; - case 0x47: - piospeed = XFER_PIO_1; - break; - case 0x5d: - piospeed = XFER_PIO_0; - break; - default: - goto oem_setup_failed; - } - - drive->current_speed = drive->init_speed = piospeed; - return 0; - } - } - } - -oem_setup_failed: - - pio_timing = 0; - dma_timing = 0; ultra_timing &= ~(0x0F << (4*unit)); ultra_enable &= ~(0x01 << drive->dn); csb5_pio &= ~(0x0F << (4*drive->dn)); @@ -307,9 +230,6 @@ static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const cha unsigned int reg; u8 btr; - /* save revision id to determine DMA capability */ - pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision); - /* force Master Latency Timer value to 64 PCICLKs */ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x40); @@ -388,7 +308,7 @@ static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const cha if (!(PCI_FUNC(dev->devfn) & 1)) btr |= 0x2; else - btr |= (svwks_revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2; + btr |= (dev->revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2; pci_write_config_byte(dev, 0x5A, btr); } /* Setup HT1000 SouthBridge Controller - Single Channel Only */ @@ -402,9 +322,9 @@ static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const cha return dev->irq; } -static unsigned int __devinit ata66_svwks_svwks (ide_hwif_t *hwif) +static u8 __devinit ata66_svwks_svwks(ide_hwif_t *hwif) { - return 1; + return ATA_CBL_PATA80; } /* On Dell PowerEdge servers with a CSB5/CSB6, the top two bits @@ -414,7 +334,7 @@ static unsigned int __devinit ata66_svwks_svwks (ide_hwif_t *hwif) * Bit 14 clear = primary IDE channel does not have 80-pin cable. * Bit 14 set = primary IDE channel has 80-pin cable. */ -static unsigned int __devinit ata66_svwks_dell (ide_hwif_t *hwif) +static u8 __devinit ata66_svwks_dell(ide_hwif_t *hwif) { struct pci_dev *dev = hwif->pci_dev; if (dev->subsystem_vendor == PCI_VENDOR_ID_DELL && @@ -422,8 +342,8 @@ static unsigned int __devinit ata66_svwks_dell (ide_hwif_t *hwif) (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE || dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE)) return ((1 << (hwif->channel + 14)) & - dev->subsystem_device) ? 1 : 0; - return 0; + dev->subsystem_device) ? ATA_CBL_PATA80 : ATA_CBL_PATA40; + return ATA_CBL_PATA40; } /* Sun Cobalt Alpine hardware avoids the 80-pin cable @@ -432,18 +352,18 @@ static unsigned int __devinit ata66_svwks_dell (ide_hwif_t *hwif) * * WARNING: this only works on Alpine hardware! */ -static unsigned int __devinit ata66_svwks_cobalt (ide_hwif_t *hwif) +static u8 __devinit ata66_svwks_cobalt(ide_hwif_t *hwif) { struct pci_dev *dev = hwif->pci_dev; if (dev->subsystem_vendor == PCI_VENDOR_ID_SUN && dev->vendor == PCI_VENDOR_ID_SERVERWORKS && dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) return ((1 << (hwif->channel + 14)) & - dev->subsystem_device) ? 1 : 0; - return 0; + dev->subsystem_device) ? ATA_CBL_PATA80 : ATA_CBL_PATA40; + return ATA_CBL_PATA40; } -static unsigned int __devinit ata66_svwks (ide_hwif_t *hwif) +static u8 __devinit ata66_svwks(ide_hwif_t *hwif) { struct pci_dev *dev = hwif->pci_dev; @@ -462,9 +382,9 @@ static unsigned int __devinit ata66_svwks (ide_hwif_t *hwif) /* Per Specified Design by OEM, and ASIC Architect */ if ((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) || (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) - return 1; + return ATA_CBL_PATA80; - return 0; + return ATA_CBL_PATA40; } static void __devinit init_hwif_svwks (ide_hwif_t *hwif) @@ -495,8 +415,8 @@ static void __devinit init_hwif_svwks (ide_hwif_t *hwif) hwif->ide_dma_check = &svwks_config_drive_xfer_rate; if (hwif->pci_dev->device != PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { - if (!hwif->udma_four) - hwif->udma_four = ata66_svwks(hwif); + if (hwif->cbl != ATA_CBL_PATA40_SHORT) + hwif->cbl = ata66_svwks(hwif); } if (!noautodma) hwif->autodma = 1; diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index d3185e29a38..d396b2929ed 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -316,14 +316,6 @@ static void sgiioc4_dma_host_off(ide_drive_t * drive) sgiioc4_clearirq(drive); } -static int -sgiioc4_ide_dma_lostirq(ide_drive_t * drive) -{ - HWIF(drive)->resetproc(drive); - - return __ide_dma_lostirq(drive); -} - static void sgiioc4_resetproc(ide_drive_t * drive) { @@ -331,6 +323,14 @@ sgiioc4_resetproc(ide_drive_t * drive) sgiioc4_clearirq(drive); } +static void +sgiioc4_dma_lost_irq(ide_drive_t * drive) +{ + sgiioc4_resetproc(drive); + + ide_dma_lost_irq(drive); +} + static u8 sgiioc4_INB(unsigned long port) { @@ -607,8 +607,8 @@ ide_init_sgiioc4(ide_hwif_t * hwif) hwif->ide_dma_test_irq = &sgiioc4_ide_dma_test_irq; hwif->dma_host_on = &sgiioc4_dma_host_on; hwif->dma_host_off = &sgiioc4_dma_host_off; - hwif->ide_dma_lostirq = &sgiioc4_ide_dma_lostirq; - hwif->ide_dma_timeout = &__ide_dma_timeout; + hwif->dma_lost_irq = &sgiioc4_dma_lost_irq; + hwif->dma_timeout = &ide_dma_timeout; hwif->INB = &sgiioc4_INB; } diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index 1a4444e7226..1c3e3548789 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -933,16 +933,17 @@ static void __devinit init_iops_siimage(ide_hwif_t *hwif) * interface. */ -static unsigned int __devinit ata66_siimage(ide_hwif_t *hwif) +static u8 __devinit ata66_siimage(ide_hwif_t *hwif) { unsigned long addr = siimage_selreg(hwif, 0); - if (pci_get_drvdata(hwif->pci_dev) == NULL) { - u8 ata66 = 0; + u8 ata66 = 0; + + if (pci_get_drvdata(hwif->pci_dev) == NULL) pci_read_config_byte(hwif->pci_dev, addr, &ata66); - return (ata66 & 0x01) ? 1 : 0; - } + else + ata66 = hwif->INB(addr); - return (hwif->INB(addr) & 0x01) ? 1 : 0; + return (ata66 & 0x01) ? ATA_CBL_PATA80 : ATA_CBL_PATA40; } /** @@ -988,8 +989,9 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif) hwif->atapi_dma = 1; hwif->ide_dma_check = &siimage_config_drive_for_dma; - if (!(hwif->udma_four)) - hwif->udma_four = ata66_siimage(hwif); + + if (hwif->cbl != ATA_CBL_PATA40_SHORT) + hwif->cbl = ata66_siimage(hwif); if (hwif->mmio) { hwif->ide_dma_test_irq = &siimage_mmio_ide_dma_test_irq; diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index ec0adad9ef6..756a9b6eb46 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/sis5513.c Version 0.20 Mar 4, 2007 + * linux/drivers/ide/pci/sis5513.c Version 0.25 Jun 10, 2007 * * Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org> * Copyright (C) 2002 Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer @@ -659,9 +659,7 @@ static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const c /* Special case for SiS630 : 630S/ET is ATA_100a */ if (SiSHostChipInfo[i].host_id == PCI_DEVICE_ID_SI_630) { - u8 hostrev; - pci_read_config_byte(host, PCI_REVISION_ID, &hostrev); - if (hostrev >= 0x30) + if (host->revision >= 0x30) chipset_family = ATA_100a; } pci_dev_put(host); @@ -702,7 +700,6 @@ static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const c u16 trueid; u8 prefctl; u8 idecfg; - u8 sbrev; pci_read_config_byte(dev, 0x4a, &idecfg); pci_write_config_byte(dev, 0x4a, idecfg | 0x10); @@ -712,11 +709,10 @@ static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const c if (trueid == 0x5517) { /* SiS 961/961B */ lpc_bridge = pci_get_slot(dev->bus, 0x10); /* Bus 0, Dev 2, Fn 0 */ - pci_read_config_byte(lpc_bridge, PCI_REVISION_ID, &sbrev); pci_read_config_byte(dev, 0x49, &prefctl); pci_dev_put(lpc_bridge); - if (sbrev == 0x10 && (prefctl & 0x80)) { + if (lpc_bridge->revision == 0x10 && (prefctl & 0x80)) { printk(KERN_INFO "SIS5513: SiS 961B MuTIOL IDE UDMA133 controller\n"); chipset_family = ATA_133a; } else { @@ -796,10 +792,33 @@ static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const c return 0; } -static unsigned int __devinit ata66_sis5513 (ide_hwif_t *hwif) +struct sis_laptop { + u16 device; + u16 subvendor; + u16 subdevice; +}; + +static const struct sis_laptop sis_laptop[] = { + /* devid, subvendor, subdev */ + { 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */ + /* end marker */ + { 0, } +}; + +static u8 __devinit ata66_sis5513(ide_hwif_t *hwif) { + struct pci_dev *pdev = hwif->pci_dev; + const struct sis_laptop *lap = &sis_laptop[0]; u8 ata66 = 0; + while (lap->device) { + if (lap->device == pdev->device && + lap->subvendor == pdev->subsystem_vendor && + lap->subdevice == pdev->subsystem_device) + return ATA_CBL_PATA40_SHORT; + lap++; + } + if (chipset_family >= ATA_133) { u16 regw = 0; u16 reg_addr = hwif->channel ? 0x52: 0x50; @@ -811,7 +830,8 @@ static unsigned int __devinit ata66_sis5513 (ide_hwif_t *hwif) pci_read_config_byte(hwif->pci_dev, 0x48, ®48h); ata66 = (reg48h & mask) ? 0 : 1; } - return ata66; + + return ata66 ? ATA_CBL_PATA80 : ATA_CBL_PATA40; } static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif) @@ -841,8 +861,8 @@ static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif) if (!chipset_family) return; - if (!(hwif->udma_four)) - hwif->udma_four = ata66_sis5513(hwif); + if (hwif->cbl != ATA_CBL_PATA40_SHORT) + hwif->cbl = ata66_sis5513(hwif); if (chipset_family > ATA_16) { hwif->ide_dma_check = &sis5513_config_xfer_rate; diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c index 7c383d9cc47..a7323d278c4 100644 --- a/drivers/ide/pci/sl82c105.c +++ b/drivers/ide/pci/sl82c105.c @@ -195,7 +195,7 @@ static inline void sl82c105_reset_host(struct pci_dev *dev) * This function is called when the IDE timer expires, the drive * indicates that it is READY, and we were waiting for DMA to complete. */ -static int sl82c105_ide_dma_lostirq(ide_drive_t *drive) +static void sl82c105_dma_lost_irq(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; @@ -222,9 +222,6 @@ static int sl82c105_ide_dma_lostirq(ide_drive_t *drive) } sl82c105_reset_host(dev); - - /* __ide_dma_lostirq would return 1, so we do as well */ - return 1; } /* @@ -244,15 +241,12 @@ static void sl82c105_dma_start(ide_drive_t *drive) ide_dma_start(drive); } -static int sl82c105_ide_dma_timeout(ide_drive_t *drive) +static void sl82c105_dma_timeout(ide_drive_t *drive) { - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = hwif->pci_dev; + DBG(("sl82c105_dma_timeout(drive:%s)\n", drive->name)); - DBG(("sl82c105_ide_dma_timeout(drive:%s)\n", drive->name)); - - sl82c105_reset_host(dev); - return __ide_dma_timeout(drive); + sl82c105_reset_host(HWIF(drive)->pci_dev); + ide_dma_timeout(drive); } static int sl82c105_ide_dma_on(ide_drive_t *drive) @@ -344,7 +338,6 @@ static void sl82c105_tune_drive(ide_drive_t *drive, u8 pio) static unsigned int sl82c105_bridge_revision(struct pci_dev *dev) { struct pci_dev *bridge; - u8 rev; /* * The bridge should be part of the same device, but function 0. @@ -366,10 +359,9 @@ static unsigned int sl82c105_bridge_revision(struct pci_dev *dev) /* * We need to find function 0's revision, not function 1 */ - pci_read_config_byte(bridge, PCI_REVISION_ID, &rev); pci_dev_put(bridge); - return rev; + return bridge->revision; } /* @@ -441,9 +433,9 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif) hwif->ide_dma_check = &sl82c105_ide_dma_check; hwif->ide_dma_on = &sl82c105_ide_dma_on; hwif->dma_off_quietly = &sl82c105_dma_off_quietly; - hwif->ide_dma_lostirq = &sl82c105_ide_dma_lostirq; + hwif->dma_lost_irq = &sl82c105_dma_lost_irq; hwif->dma_start = &sl82c105_dma_start; - hwif->ide_dma_timeout = &sl82c105_ide_dma_timeout; + hwif->dma_timeout = &sl82c105_dma_timeout; if (!noautodma) hwif->autodma = 1; diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c index c40f291f91e..575dbbd8b48 100644 --- a/drivers/ide/pci/slc90e66.c +++ b/drivers/ide/pci/slc90e66.c @@ -199,10 +199,9 @@ static void __devinit init_hwif_slc90e66 (ide_hwif_t *hwif) hwif->mwdma_mask = 0x06; hwif->swdma_mask = 0x04; - if (!hwif->udma_four) { + if (hwif->cbl != ATA_CBL_PATA40_SHORT) /* bit[0(1)]: 0:80, 1:40 */ - hwif->udma_four = (reg47 & mask) ? 0 : 1; - } + hwif->cbl = (reg47 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; hwif->ide_dma_check = &slc90e66_config_drive_xfer_rate; diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c index cee619bb2ea..8de1f8e2249 100644 --- a/drivers/ide/pci/tc86c001.c +++ b/drivers/ide/pci/tc86c001.c @@ -220,13 +220,13 @@ static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif) hwif->ide_dma_check = &tc86c001_config_drive_xfer_rate; hwif->dma_start = &tc86c001_dma_start; - if (!hwif->udma_four) { + if (hwif->cbl != ATA_CBL_PATA40_SHORT) { /* * System Control 1 Register bit 13 (PDIAGN): * 0=80-pin cable, 1=40-pin cable */ scr1 = hwif->INW(sc_base + 0x00); - hwif->udma_four = (scr1 & 0x2000) ? 0 : 1; + hwif->cbl = (scr1 & 0x2000) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; } if (!noautodma) diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index a508550c409..27e92fb9f95 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -1,6 +1,6 @@ /* * - * Version 3.38 + * Version 3.45 * * VIA IDE driver for Linux. Supported southbridges: * @@ -9,6 +9,7 @@ * vt8235, vt8237, vt8237a * * Copyright (c) 2000-2002 Vojtech Pavlik + * Copyright (c) 2007 Bartlomiej Zolnierkiewicz * * Based on the work of: * Michel Aubry @@ -33,6 +34,8 @@ #include <linux/pci.h> #include <linux/init.h> #include <linux/ide.h> +#include <linux/dmi.h> + #include <asm/io.h> #ifdef CONFIG_PPC_CHRP @@ -41,8 +44,6 @@ #include "ide-timing.h" -#define DISPLAY_VIA_TIMINGS - #define VIA_IDE_ENABLE 0x40 #define VIA_IDE_CONFIG 0x41 #define VIA_FIFO_CONFIG 0x43 @@ -54,18 +55,12 @@ #define VIA_ADDRESS_SETUP 0x4c #define VIA_UDMA_TIMING 0x50 -#define VIA_UDMA 0x007 -#define VIA_UDMA_NONE 0x000 -#define VIA_UDMA_33 0x001 -#define VIA_UDMA_66 0x002 -#define VIA_UDMA_100 0x003 -#define VIA_UDMA_133 0x004 -#define VIA_BAD_PREQ 0x010 /* Crashes if PREQ# till DDACK# set */ -#define VIA_BAD_CLK66 0x020 /* 66 MHz clock doesn't work correctly */ -#define VIA_SET_FIFO 0x040 /* Needs to have FIFO split set */ -#define VIA_NO_UNMASK 0x080 /* Doesn't work with IRQ unmasking on */ -#define VIA_BAD_ID 0x100 /* Has wrong vendor ID (0x1107) */ -#define VIA_BAD_AST 0x200 /* Don't touch Address Setup Timing */ +#define VIA_BAD_PREQ 0x01 /* Crashes if PREQ# till DDACK# set */ +#define VIA_BAD_CLK66 0x02 /* 66 MHz clock doesn't work correctly */ +#define VIA_SET_FIFO 0x04 /* Needs to have FIFO split set */ +#define VIA_NO_UNMASK 0x08 /* Doesn't work with IRQ unmasking on */ +#define VIA_BAD_ID 0x10 /* Has wrong vendor ID (0x1107) */ +#define VIA_BAD_AST 0x20 /* Don't touch Address Setup Timing */ /* * VIA SouthBridge chips. @@ -76,36 +71,37 @@ static struct via_isa_bridge { u16 id; u8 rev_min; u8 rev_max; - u16 flags; + u8 udma_mask; + u8 flags; } via_isa_bridges[] = { - { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, - { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, - { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, - { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, - { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, - { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, - { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, - { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, - { "vt8233c", PCI_DEVICE_ID_VIA_8233C_0, 0x00, 0x2f, VIA_UDMA_100 }, - { "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, VIA_UDMA_100 }, - { "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, VIA_UDMA_100 }, - { "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, VIA_UDMA_100 }, - { "vt82c686a", PCI_DEVICE_ID_VIA_82C686, 0x10, 0x2f, VIA_UDMA_66 }, - { "vt82c686", PCI_DEVICE_ID_VIA_82C686, 0x00, 0x0f, VIA_UDMA_33 | VIA_BAD_CLK66 }, - { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, VIA_UDMA_66 }, - { "vt82c596a", PCI_DEVICE_ID_VIA_82C596, 0x00, 0x0f, VIA_UDMA_33 | VIA_BAD_CLK66 }, - { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, VIA_UDMA_33 | VIA_SET_FIFO }, - { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, VIA_UDMA_33 | VIA_SET_FIFO | VIA_BAD_PREQ }, - { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, VIA_UDMA_33 | VIA_SET_FIFO }, - { "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, VIA_UDMA_33 | VIA_SET_FIFO }, - { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, VIA_UDMA_NONE | VIA_SET_FIFO }, - { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK }, - { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID }, + { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, + { "vt8233c", PCI_DEVICE_ID_VIA_8233C_0, 0x00, 0x2f, ATA_UDMA5, }, + { "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, ATA_UDMA5, }, + { "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, ATA_UDMA5, }, + { "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, ATA_UDMA5, }, + { "vt82c686a", PCI_DEVICE_ID_VIA_82C686, 0x10, 0x2f, ATA_UDMA4, }, + { "vt82c686", PCI_DEVICE_ID_VIA_82C686, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 }, + { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, ATA_UDMA4, }, + { "vt82c596a", PCI_DEVICE_ID_VIA_82C596, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 }, + { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, ATA_UDMA2, VIA_SET_FIFO }, + { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, ATA_UDMA2, VIA_SET_FIFO | VIA_BAD_PREQ }, + { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, ATA_UDMA2, VIA_SET_FIFO }, + { "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, ATA_UDMA2, VIA_SET_FIFO }, + { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, 0x00, VIA_SET_FIFO }, + { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK }, + { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID }, { NULL } }; static unsigned int via_clock; -static char *via_dma[] = { "MWDMA16", "UDMA33", "UDMA66", "UDMA100", "UDMA133" }; +static char *via_dma[] = { "16", "25", "33", "44", "66", "100", "133" }; struct via82cxxx_dev { @@ -140,12 +136,12 @@ static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing) pci_write_config_byte(dev, VIA_DRIVE_TIMING + (3 - dn), ((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1)); - switch (vdev->via_config->flags & VIA_UDMA) { - case VIA_UDMA_33: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break; - case VIA_UDMA_66: t = timing->udma ? (0xe8 | (FIT(timing->udma, 2, 9) - 2)) : 0x0f; break; - case VIA_UDMA_100: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break; - case VIA_UDMA_133: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break; - default: return; + switch (vdev->via_config->udma_mask) { + case ATA_UDMA2: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break; + case ATA_UDMA4: t = timing->udma ? (0xe8 | (FIT(timing->udma, 2, 9) - 2)) : 0x0f; break; + case ATA_UDMA5: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break; + case ATA_UDMA6: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break; + default: return; } pci_write_config_byte(dev, VIA_UDMA_TIMING + (3 - dn), t); @@ -173,12 +169,12 @@ static int via_set_drive(ide_drive_t *drive, u8 speed) T = 1000000000 / via_clock; - switch (vdev->via_config->flags & VIA_UDMA) { - case VIA_UDMA_33: UT = T; break; - case VIA_UDMA_66: UT = T/2; break; - case VIA_UDMA_100: UT = T/3; break; - case VIA_UDMA_133: UT = T/4; break; - default: UT = T; + switch (vdev->via_config->udma_mask) { + case ATA_UDMA2: UT = T; break; + case ATA_UDMA4: UT = T/2; break; + case ATA_UDMA5: UT = T/3; break; + case ATA_UDMA6: UT = T/4; break; + default: UT = T; } ide_timing_compute(drive, speed, &t, T, UT); @@ -208,8 +204,7 @@ static int via_set_drive(ide_drive_t *drive, u8 speed) static void via82cxxx_tune_drive(ide_drive_t *drive, u8 pio) { if (pio == 255) { - via_set_drive(drive, - ide_find_best_mode(drive, XFER_PIO | XFER_EPIO)); + via_set_drive(drive, ide_find_best_pio_mode(drive)); return; } @@ -226,16 +221,10 @@ static void via82cxxx_tune_drive(ide_drive_t *drive, u8 pio) static int via82cxxx_ide_dma_check (ide_drive_t *drive) { - ide_hwif_t *hwif = HWIF(drive); - struct via82cxxx_dev *vdev = pci_get_drvdata(hwif->pci_dev); - u16 w80 = hwif->udma_four; + u8 speed = ide_max_dma_mode(drive); - u16 speed = ide_find_best_mode(drive, - XFER_PIO | XFER_EPIO | XFER_SWDMA | XFER_MWDMA | - (vdev->via_config->flags & VIA_UDMA ? XFER_UDMA : 0) | - (w80 && (vdev->via_config->flags & VIA_UDMA) >= VIA_UDMA_66 ? XFER_UDMA_66 : 0) | - (w80 && (vdev->via_config->flags & VIA_UDMA) >= VIA_UDMA_100 ? XFER_UDMA_100 : 0) | - (w80 && (vdev->via_config->flags & VIA_UDMA) >= VIA_UDMA_133 ? XFER_UDMA_133 : 0)); + if (speed == 0) + speed = ide_find_best_pio_mode(drive); via_set_drive(drive, speed); @@ -248,16 +237,14 @@ static int via82cxxx_ide_dma_check (ide_drive_t *drive) static struct via_isa_bridge *via_config_find(struct pci_dev **isa) { struct via_isa_bridge *via_config; - u8 t; for (via_config = via_isa_bridges; via_config->id; via_config++) if ((*isa = pci_get_device(PCI_VENDOR_ID_VIA + !!(via_config->flags & VIA_BAD_ID), via_config->id, NULL))) { - pci_read_config_byte(*isa, PCI_REVISION_ID, &t); - if (t >= via_config->rev_min && - t <= via_config->rev_max) + if ((*isa)->revision >= via_config->rev_min && + (*isa)->revision <= via_config->rev_max) break; pci_dev_put(*isa); } @@ -272,8 +259,8 @@ static void __devinit via_cable_detect(struct via82cxxx_dev *vdev, u32 u) { int i; - switch (vdev->via_config->flags & VIA_UDMA) { - case VIA_UDMA_66: + switch (vdev->via_config->udma_mask) { + case ATA_UDMA4: for (i = 24; i >= 0; i -= 8) if (((u >> (i & 16)) & 8) && ((u >> i) & 0x20) && @@ -286,7 +273,7 @@ static void __devinit via_cable_detect(struct via82cxxx_dev *vdev, u32 u) } break; - case VIA_UDMA_100: + case ATA_UDMA5: for (i = 24; i >= 0; i -= 8) if (((u >> i) & 0x10) || (((u >> i) & 0x20) && @@ -298,7 +285,7 @@ static void __devinit via_cable_detect(struct via82cxxx_dev *vdev, u32 u) } break; - case VIA_UDMA_133: + case ATA_UDMA6: for (i = 24; i >= 0; i -= 8) if (((u >> i) & 0x10) || (((u >> i) & 0x20) && @@ -353,7 +340,7 @@ static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const via_cable_detect(vdev, u); - if ((via_config->flags & VIA_UDMA) == VIA_UDMA_66) { + if (via_config->udma_mask == ATA_UDMA4) { /* Enable Clk66 */ pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008); } else if (via_config->flags & VIA_BAD_CLK66) { @@ -415,17 +402,54 @@ static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const * Print the boot message. */ - pci_read_config_byte(isa, PCI_REVISION_ID, &t); - printk(KERN_INFO "VP_IDE: VIA %s (rev %02x) IDE %s " + printk(KERN_INFO "VP_IDE: VIA %s (rev %02x) IDE %sDMA%s " "controller on pci%s\n", - via_config->name, t, - via_dma[via_config->flags & VIA_UDMA], + via_config->name, isa->revision, + via_config->udma_mask ? "U" : "MW", + via_dma[via_config->udma_mask ? + (fls(via_config->udma_mask) - 1) : 0], pci_name(dev)); pci_dev_put(isa); return 0; } +/* + * Cable special cases + */ + +static struct dmi_system_id cable_dmi_table[] = { + { + .ident = "Acer Ferrari 3400", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Acer,Inc."), + DMI_MATCH(DMI_BOARD_NAME, "Ferrari 3400"), + }, + }, + { } +}; + +static int via_cable_override(void) +{ + /* Systems by DMI */ + if (dmi_check_system(cable_dmi_table)) + return 1; + return 0; +} + +static u8 __devinit via82cxxx_cable_detect(ide_hwif_t *hwif) +{ + struct via82cxxx_dev *vdev = pci_get_drvdata(hwif->pci_dev); + + if (via_cable_override()) + return ATA_CBL_PATA40_SHORT; + + if ((vdev->via_80w >> hwif->channel) & 1) + return ATA_CBL_PATA80; + else + return ATA_CBL_PATA40; +} + static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif) { struct via82cxxx_dev *vdev = pci_get_drvdata(hwif->pci_dev); @@ -454,12 +478,14 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif) return; hwif->atapi_dma = 1; - hwif->ultra_mask = 0x7f; + + hwif->ultra_mask = vdev->via_config->udma_mask; hwif->mwdma_mask = 0x07; hwif->swdma_mask = 0x07; - if (!hwif->udma_four) - hwif->udma_four = (vdev->via_80w >> hwif->channel) & 1; + if (hwif->cbl != ATA_CBL_PATA40_SHORT) + hwif->cbl = via82cxxx_cable_detect(hwif); + hwif->ide_dma_check = &via82cxxx_ide_dma_check; if (!noautodma) hwif->autodma = 1; diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 45fc36f0f21..e46f4720654 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -942,8 +942,8 @@ pmac_ide_tune_chipset (ide_drive_t *drive, byte speed) return 1; case XFER_UDMA_4: case XFER_UDMA_3: - if (HWIF(drive)->udma_four == 0) - return 1; + if (drive->hwif->cbl != ATA_CBL_PATA80) + return 1; case XFER_UDMA_2: case XFER_UDMA_1: case XFER_UDMA_0: @@ -1244,7 +1244,7 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) hwif->chipset = ide_pmac; hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET] || pmif->mediabay; hwif->hold = pmif->mediabay; - hwif->udma_four = pmif->cable_80; + hwif->cbl = pmif->cable_80 ? ATA_CBL_PATA80 : ATA_CBL_PATA40; hwif->drives[0].unmask = 1; hwif->drives[1].unmask = 1; hwif->tuneproc = pmac_ide_tuneproc; @@ -1821,28 +1821,11 @@ pmac_ide_dma_check(ide_drive_t *drive) enable = 0; if (enable) { - short mode; - - map = XFER_MWDMA; - if (pmif->kind == controller_kl_ata4 - || pmif->kind == controller_un_ata6 - || pmif->kind == controller_k2_ata6 - || pmif->kind == controller_sh_ata6) { - map |= XFER_UDMA; - if (pmif->cable_80) { - map |= XFER_UDMA_66; - if (pmif->kind == controller_un_ata6 || - pmif->kind == controller_k2_ata6 || - pmif->kind == controller_sh_ata6) - map |= XFER_UDMA_100; - if (pmif->kind == controller_sh_ata6) - map |= XFER_UDMA_133; - } - } - mode = ide_find_best_mode(drive, map); - if (mode & XFER_UDMA) + u8 mode = ide_max_dma_mode(drive); + + if (mode >= XFER_UDMA_0) drive->using_dma = pmac_ide_udma_enable(drive, mode); - else if (mode & XFER_MWDMA) + else if (mode >= XFER_MW_DMA_0) drive->using_dma = pmac_ide_mdma_enable(drive, mode); hwif->OUTB(0, IDE_CONTROL_REG); /* Apply settings to controller */ @@ -2004,20 +1987,19 @@ static void pmac_ide_dma_host_on(ide_drive_t *drive) { } -static int -pmac_ide_dma_lostirq (ide_drive_t *drive) +static void +pmac_ide_dma_lost_irq (ide_drive_t *drive) { pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data; volatile struct dbdma_regs __iomem *dma; unsigned long status; if (pmif == NULL) - return 0; + return; dma = pmif->dma_regs; status = readl(&dma->status); printk(KERN_ERR "ide-pmac lost interrupt, dma status: %lx\n", status); - return 0; } /* @@ -2057,8 +2039,8 @@ pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) hwif->ide_dma_test_irq = &pmac_ide_dma_test_irq; hwif->dma_host_off = &pmac_ide_dma_host_off; hwif->dma_host_on = &pmac_ide_dma_host_on; - hwif->ide_dma_timeout = &__ide_dma_timeout; - hwif->ide_dma_lostirq = &pmac_ide_dma_lostirq; + hwif->dma_timeout = &ide_dma_timeout; + hwif->dma_lost_irq = &pmac_ide_dma_lost_irq; hwif->atapi_dma = 1; switch(pmif->kind) { |