aboutsummaryrefslogtreecommitdiff
path: root/drivers/infiniband
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/infiniband')
-rw-r--r--drivers/infiniband/hw/ipath/ipath_eeprom.c613
-rw-r--r--drivers/infiniband/hw/ipath/ipath_intr.c841
-rw-r--r--drivers/infiniband/hw/ipath/ipath_stats.c303
-rw-r--r--drivers/infiniband/hw/ipath/ipath_wc_x86_64.c157
4 files changed, 1914 insertions, 0 deletions
diff --git a/drivers/infiniband/hw/ipath/ipath_eeprom.c b/drivers/infiniband/hw/ipath/ipath_eeprom.c
new file mode 100644
index 00000000000..f11a900e8cd
--- /dev/null
+++ b/drivers/infiniband/hw/ipath/ipath_eeprom.c
@@ -0,0 +1,613 @@
+/*
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/vmalloc.h>
+
+#include "ipath_kernel.h"
+
+/*
+ * InfiniPath I2C driver for a serial eeprom. This is not a generic
+ * I2C interface. For a start, the device we're using (Atmel AT24C11)
+ * doesn't work like a regular I2C device. It looks like one
+ * electrically, but not logically. Normal I2C devices have a single
+ * 7-bit or 10-bit I2C address that they respond to. Valid 7-bit
+ * addresses range from 0x03 to 0x77. Addresses 0x00 to 0x02 and 0x78
+ * to 0x7F are special reserved addresses (e.g. 0x00 is the "general
+ * call" address.) The Atmel device, on the other hand, responds to ALL
+ * 7-bit addresses. It's designed to be the only device on a given I2C
+ * bus. A 7-bit address corresponds to the memory address within the
+ * Atmel device itself.
+ *
+ * Also, the timing requirements mean more than simple software
+ * bitbanging, with readbacks from chip to ensure timing (simple udelay
+ * is not enough).
+ *
+ * This all means that accessing the device is specialized enough
+ * that using the standard kernel I2C bitbanging interface would be
+ * impossible. For example, the core I2C eeprom driver expects to find
+ * a device at one or more of a limited set of addresses only. It doesn't
+ * allow writing to an eeprom. It also doesn't provide any means of
+ * accessing eeprom contents from within the kernel, only via sysfs.
+ */
+
+enum i2c_type {
+ i2c_line_scl = 0,
+ i2c_line_sda
+};
+
+enum i2c_state {
+ i2c_line_low = 0,
+ i2c_line_high
+};
+
+#define READ_CMD 1
+#define WRITE_CMD 0
+
+static int eeprom_init;
+
+/*
+ * The gpioval manipulation really should be protected by spinlocks
+ * or be converted to use atomic operations.
+ */
+
+/**
+ * i2c_gpio_set - set a GPIO line
+ * @dd: the infinipath device
+ * @line: the line to set
+ * @new_line_state: the state to set
+ *
+ * Returns 0 if the line was set to the new state successfully, non-zero
+ * on error.
+ */
+static int i2c_gpio_set(struct ipath_devdata *dd,
+ enum i2c_type line,
+ enum i2c_state new_line_state)
+{
+ u64 read_val, write_val, mask, *gpioval;
+
+ gpioval = &dd->ipath_gpio_out;
+ read_val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_extctrl);
+ if (line == i2c_line_scl)
+ mask = ipath_gpio_scl;
+ else
+ mask = ipath_gpio_sda;
+
+ if (new_line_state == i2c_line_high)
+ /* tri-state the output rather than force high */
+ write_val = read_val & ~mask;
+ else
+ /* config line to be an output */
+ write_val = read_val | mask;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_extctrl, write_val);
+
+ /* set high and verify */
+ if (new_line_state == i2c_line_high)
+ write_val = 0x1UL;
+ else
+ write_val = 0x0UL;
+
+ if (line == i2c_line_scl) {
+ write_val <<= ipath_gpio_scl_num;
+ *gpioval = *gpioval & ~(1UL << ipath_gpio_scl_num);
+ *gpioval |= write_val;
+ } else {
+ write_val <<= ipath_gpio_sda_num;
+ *gpioval = *gpioval & ~(1UL << ipath_gpio_sda_num);
+ *gpioval |= write_val;
+ }
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_out, *gpioval);
+
+ return 0;
+}
+
+/**
+ * i2c_gpio_get - get a GPIO line state
+ * @dd: the infinipath device
+ * @line: the line to get
+ * @curr_statep: where to put the line state
+ *
+ * Returns 0 if the line was set to the new state successfully, non-zero
+ * on error. curr_state is not set on error.
+ */
+static int i2c_gpio_get(struct ipath_devdata *dd,
+ enum i2c_type line,
+ enum i2c_state *curr_statep)
+{
+ u64 read_val, write_val, mask;
+ int ret;
+
+ /* check args */
+ if (curr_statep == NULL) {
+ ret = 1;
+ goto bail;
+ }
+
+ read_val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_extctrl);
+ /* config line to be an input */
+ if (line == i2c_line_scl)
+ mask = ipath_gpio_scl;
+ else
+ mask = ipath_gpio_sda;
+ write_val = read_val & ~mask;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_extctrl, write_val);
+ read_val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_extstatus);
+
+ if (read_val & mask)
+ *curr_statep = i2c_line_high;
+ else
+ *curr_statep = i2c_line_low;
+
+ ret = 0;
+
+bail:
+ return ret;
+}
+
+/**
+ * i2c_wait_for_writes - wait for a write
+ * @dd: the infinipath device
+ *
+ * We use this instead of udelay directly, so we can make sure
+ * that previous register writes have been flushed all the way
+ * to the chip. Since we are delaying anyway, the cost doesn't
+ * hurt, and makes the bit twiddling more regular
+ */
+static void i2c_wait_for_writes(struct ipath_devdata *dd)
+{
+ (void)ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
+}
+
+static void scl_out(struct ipath_devdata *dd, u8 bit)
+{
+ i2c_gpio_set(dd, i2c_line_scl, bit ? i2c_line_high : i2c_line_low);
+
+ i2c_wait_for_writes(dd);
+}
+
+static void sda_out(struct ipath_devdata *dd, u8 bit)
+{
+ i2c_gpio_set(dd, i2c_line_sda, bit ? i2c_line_high : i2c_line_low);
+
+ i2c_wait_for_writes(dd);
+}
+
+static u8 sda_in(struct ipath_devdata *dd, int wait)
+{
+ enum i2c_state bit;
+
+ if (i2c_gpio_get(dd, i2c_line_sda, &bit))
+ ipath_dbg("get bit failed!\n");
+
+ if (wait)
+ i2c_wait_for_writes(dd);
+
+ return bit == i2c_line_high ? 1U : 0;
+}
+
+/**
+ * i2c_ackrcv - see if ack following write is true
+ * @dd: the infinipath device
+ */
+static int i2c_ackrcv(struct ipath_devdata *dd)
+{
+ u8 ack_received;
+
+ /* AT ENTRY SCL = LOW */
+ /* change direction, ignore data */
+ ack_received = sda_in(dd, 1);
+ scl_out(dd, i2c_line_high);
+ ack_received = sda_in(dd, 1) == 0;
+ scl_out(dd, i2c_line_low);
+ return ack_received;
+}
+
+/**
+ * wr_byte - write a byte, one bit at a time
+ * @dd: the infinipath device
+ * @data: the byte to write
+ *
+ * Returns 0 if we got the following ack, otherwise 1
+ */
+static int wr_byte(struct ipath_devdata *dd, u8 data)
+{
+ int bit_cntr;
+ u8 bit;
+
+ for (bit_cntr = 7; bit_cntr >= 0; bit_cntr--) {
+ bit = (data >> bit_cntr) & 1;
+ sda_out(dd, bit);
+ scl_out(dd, i2c_line_high);
+ scl_out(dd, i2c_line_low);
+ }
+ return (!i2c_ackrcv(dd)) ? 1 : 0;
+}
+
+static void send_ack(struct ipath_devdata *dd)
+{
+ sda_out(dd, i2c_line_low);
+ scl_out(dd, i2c_line_high);
+ scl_out(dd, i2c_line_low);
+ sda_out(dd, i2c_line_high);
+}
+
+/**
+ * i2c_startcmd - transmit the start condition, followed by address/cmd
+ * @dd: the infinipath device
+ * @offset_dir: direction byte
+ *
+ * (both clock/data high, clock high, data low while clock is high)
+ */
+static int i2c_startcmd(struct ipath_devdata *dd, u8 offset_dir)
+{
+ int res;
+
+ /* issue start sequence */
+ sda_out(dd, i2c_line_high);
+ scl_out(dd, i2c_line_high);
+ sda_out(dd, i2c_line_low);
+ scl_out(dd, i2c_line_low);
+
+ /* issue length and direction byte */
+ res = wr_byte(dd, offset_dir);
+
+ if (res)
+ ipath_cdbg(VERBOSE, "No ack to complete start\n");
+
+ return res;
+}
+
+/**
+ * stop_cmd - transmit the stop condition
+ * @dd: the infinipath device
+ *
+ * (both clock/data low, clock high, data high while clock is high)
+ */
+static void stop_cmd(struct ipath_devdata *dd)
+{
+ scl_out(dd, i2c_line_low);
+ sda_out(dd, i2c_line_low);
+ scl_out(dd, i2c_line_high);
+ sda_out(dd, i2c_line_high);
+ udelay(2);
+}
+
+/**
+ * eeprom_reset - reset I2C communication
+ * @dd: the infinipath device
+ */
+
+static int eeprom_reset(struct ipath_devdata *dd)
+{
+ int clock_cycles_left = 9;
+ u64 *gpioval = &dd->ipath_gpio_out;
+ int ret;
+
+ eeprom_init = 1;
+ *gpioval = ipath_read_kreg64(dd, dd->ipath_kregs->kr_gpio_out);
+ ipath_cdbg(VERBOSE, "Resetting i2c eeprom; initial gpioout reg "
+ "is %llx\n", (unsigned long long) *gpioval);
+
+ /*
+ * This is to get the i2c into a known state, by first going low,
+ * then tristate sda (and then tristate scl as first thing
+ * in loop)
+ */
+ scl_out(dd, i2c_line_low);
+ sda_out(dd, i2c_line_high);
+
+ while (clock_cycles_left--) {
+ scl_out(dd, i2c_line_high);
+
+ if (sda_in(dd, 0)) {
+ sda_out(dd, i2c_line_low);
+ scl_out(dd, i2c_line_low);
+ ret = 0;
+ goto bail;
+ }
+
+ scl_out(dd, i2c_line_low);
+ }
+
+ ret = 1;
+
+bail:
+ return ret;
+}
+
+/**
+ * ipath_eeprom_read - receives bytes from the eeprom via I2C
+ * @dd: the infinipath device
+ * @eeprom_offset: address to read from
+ * @buffer: where to store result
+ * @len: number of bytes to receive
+ */
+
+int ipath_eeprom_read(struct ipath_devdata *dd, u8 eeprom_offset,
+ void *buffer, int len)
+{
+ /* compiler complains unless initialized */
+ u8 single_byte = 0;
+ int bit_cntr;
+ int ret;
+
+ if (!eeprom_init)
+ eeprom_reset(dd);
+
+ eeprom_offset = (eeprom_offset << 1) | READ_CMD;
+
+ if (i2c_startcmd(dd, eeprom_offset)) {
+ ipath_dbg("Failed startcmd\n");
+ stop_cmd(dd);
+ ret = 1;
+ goto bail;
+ }
+
+ /*
+ * eeprom keeps clocking data out as long as we ack, automatically
+ * incrementing the address.
+ */
+ while (len-- > 0) {
+ /* get data */
+ single_byte = 0;
+ for (bit_cntr = 8; bit_cntr; bit_cntr--) {
+ u8 bit;
+ scl_out(dd, i2c_line_high);
+ bit = sda_in(dd, 0);
+ single_byte |= bit << (bit_cntr - 1);
+ scl_out(dd, i2c_line_low);
+ }
+
+ /* send ack if not the last byte */
+ if (len)
+ send_ack(dd);
+
+ *((u8 *) buffer) = single_byte;
+ buffer++;
+ }
+
+ stop_cmd(dd);
+
+ ret = 0;
+
+bail:
+ return ret;
+}
+
+/**
+ * ipath_eeprom_write - writes data to the eeprom via I2C
+ * @dd: the infinipath device
+ * @eeprom_offset: where to place data
+ * @buffer: data to write
+ * @len: number of bytes to write
+ */
+int ipath_eeprom_write(struct ipath_devdata *dd, u8 eeprom_offset,
+ const void *buffer, int len)
+{
+ u8 single_byte;
+ int sub_len;
+ const u8 *bp = buffer;
+ int max_wait_time, i;
+ int ret;
+
+ if (!eeprom_init)
+ eeprom_reset(dd);
+
+ while (len > 0) {
+ if (i2c_startcmd(dd, (eeprom_offset << 1) | WRITE_CMD)) {
+ ipath_dbg("Failed to start cmd offset %u\n",
+ eeprom_offset);
+ goto failed_write;
+ }
+
+ sub_len = min(len, 4);
+ eeprom_offset += sub_len;
+ len -= sub_len;
+
+ for (i = 0; i < sub_len; i++) {
+ if (wr_byte(dd, *bp++)) {
+ ipath_dbg("no ack after byte %u/%u (%u "
+ "total remain)\n", i, sub_len,
+ len + sub_len - i);
+ goto failed_write;
+ }
+ }
+
+ stop_cmd(dd);
+
+ /*
+ * wait for write complete by waiting for a successful
+ * read (the chip replies with a zero after the write
+ * cmd completes, and before it writes to the eeprom.
+ * The startcmd for the read will fail the ack until
+ * the writes have completed. We do this inline to avoid
+ * the debug prints that are in the real read routine
+ * if the startcmd fails.
+ */
+ max_wait_time = 100;
+ while (i2c_startcmd(dd, READ_CMD)) {
+ stop_cmd(dd);
+ if (!--max_wait_time) {
+ ipath_dbg("Did not get successful read to "
+ "complete write\n");
+ goto failed_write;
+ }
+ }
+ /* now read the zero byte */
+ for (i = single_byte = 0; i < 8; i++) {
+ u8 bit;
+ scl_out(dd, i2c_line_high);
+ bit = sda_in(dd, 0);
+ scl_out(dd, i2c_line_low);
+ single_byte <<= 1;
+ single_byte |= bit;
+ }
+ stop_cmd(dd);
+ }
+
+ ret = 0;
+ goto bail;
+
+failed_write:
+ stop_cmd(dd);
+ ret = 1;
+
+bail:
+ return ret;
+}
+
+static u8 flash_csum(struct ipath_flash *ifp, int adjust)
+{
+ u8 *ip = (u8 *) ifp;
+ u8 csum = 0, len;
+
+ for (len = 0; len < ifp->if_length; len++)
+ csum += *ip++;
+ csum -= ifp->if_csum;
+ csum = ~csum;
+ if (adjust)
+ ifp->if_csum = csum;
+
+ return csum;
+}
+
+/**
+ * ipath_get_guid - get the GUID from the i2c device
+ * @dd: the infinipath device
+ *
+ * When we add the multi-chip support, we will probably have to add
+ * the ability to use the number of guids field, and get the guid from
+ * the first chip's flash, to use for all of them.
+ */
+void ipath_get_guid(struct ipath_devdata *dd)
+{
+ void *buf;
+ struct ipath_flash *ifp;
+ __be64 guid;
+ int len;
+ u8 csum, *bguid;
+ int t = dd->ipath_unit;
+ struct ipath_devdata *dd0 = ipath_lookup(0);
+
+ if (t && dd0->ipath_nguid > 1 && t <= dd0->ipath_nguid) {
+ u8 *bguid, oguid;
+ dd->ipath_guid = dd0->ipath_guid;
+ bguid = (u8 *) & dd->ipath_guid;
+
+ oguid = bguid[7];
+ bguid[7] += t;
+ if (oguid > bguid[7]) {
+ if (bguid[6] == 0xff) {
+ if (bguid[5] == 0xff) {
+ ipath_dev_err(
+ dd,
+ "Can't set %s GUID from "
+ "base, wraps to OUI!\n",
+ ipath_get_unit_name(t));
+ dd->ipath_guid = 0;
+ goto bail;
+ }
+ bguid[5]++;
+ }
+ bguid[6]++;
+ }
+ dd->ipath_nguid = 1;
+
+ ipath_dbg("nguid %u, so adding %u to device 0 guid, "
+ "for %llx\n",
+ dd0->ipath_nguid, t,
+ (unsigned long long) be64_to_cpu(dd->ipath_guid));
+ goto bail;
+ }
+
+ len = offsetof(struct ipath_flash, if_future);
+ buf = vmalloc(len);
+ if (!buf) {
+ ipath_dev_err(dd, "Couldn't allocate memory to read %u "
+ "bytes from eeprom for GUID\n", len);
+ goto bail;
+ }
+
+ if (ipath_eeprom_read(dd, 0, buf, len)) {
+ ipath_dev_err(dd, "Failed reading GUID from eeprom\n");
+ goto done;
+ }
+ ifp = (struct ipath_flash *)buf;
+
+ csum = flash_csum(ifp, 0);
+ if (csum != ifp->if_csum) {
+ dev_info(&dd->pcidev->dev, "Bad I2C flash checksum: "
+ "0x%x, not 0x%x\n", csum, ifp->if_csum);
+ goto done;
+ }
+ if (*(__be64 *) ifp->if_guid == 0ULL ||
+ *(__be64 *) ifp->if_guid == __constant_cpu_to_be64(-1LL)) {
+ ipath_dev_err(dd, "Invalid GUID %llx from flash; "
+ "ignoring\n",
+ *(unsigned long long *) ifp->if_guid);
+ /* don't allow GUID if all 0 or all 1's */
+ goto done;
+ }
+
+ /* complain, but allow it */
+ if (*(u64 *) ifp->if_guid == 0x100007511000000ULL)
+ dev_info(&dd->pcidev->dev, "Warning, GUID %llx is "
+ "default, probably not correct!\n",
+ *(unsigned long long *) ifp->if_guid);
+
+ bguid = ifp->if_guid;
+ if (!bguid[0] && !bguid[1] && !bguid[2]) {
+ /* original incorrect GUID format in flash; fix in
+ * core copy, by shifting up 2 octets; don't need to
+ * change top octet, since both it and shifted are
+ * 0.. */
+ bguid[1] = bguid[3];
+ bguid[2] = bguid[4];
+ bguid[3] = bguid[4] = 0;
+ guid = *(__be64 *) ifp->if_guid;
+ ipath_cdbg(VERBOSE, "Old GUID format in flash, top 3 zero, "
+ "shifting 2 octets\n");
+ } else
+ guid = *(__be64 *) ifp->if_guid;
+ dd->ipath_guid = guid;
+ dd->ipath_nguid = ifp->if_numguid;
+ memcpy(dd->ipath_serial, ifp->if_serial,
+ sizeof(ifp->if_serial));
+ ipath_cdbg(VERBOSE, "Initted GUID to %llx from eeprom\n",
+ (unsigned long long) be64_to_cpu(dd->ipath_guid));
+
+done:
+ vfree(buf);
+
+bail:;
+}
diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c
new file mode 100644
index 00000000000..60f5f410806
--- /dev/null
+++ b/drivers/infiniband/hw/ipath/ipath_intr.c
@@ -0,0 +1,841 @@
+/*
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/pci.h>
+
+#include "ipath_kernel.h"
+#include "ips_common.h"
+#include "ipath_layer.h"
+
+#define E_SUM_PKTERRS \
+ (INFINIPATH_E_RHDRLEN | INFINIPATH_E_RBADTID | \
+ INFINIPATH_E_RBADVERSION | INFINIPATH_E_RHDR | \
+ INFINIPATH_E_RLONGPKTLEN | INFINIPATH_E_RSHORTPKTLEN | \
+ INFINIPATH_E_RMAXPKTLEN | INFINIPATH_E_RMINPKTLEN | \
+ INFINIPATH_E_RFORMATERR | INFINIPATH_E_RUNSUPVL | \
+ INFINIPATH_E_RUNEXPCHAR | INFINIPATH_E_REBP)
+
+#define E_SUM_ERRS \
+ (INFINIPATH_E_SPIOARMLAUNCH | INFINIPATH_E_SUNEXPERRPKTNUM | \
+ INFINIPATH_E_SDROPPEDDATAPKT | INFINIPATH_E_SDROPPEDSMPPKT | \
+ INFINIPATH_E_SMAXPKTLEN | INFINIPATH_E_SUNSUPVL | \
+ INFINIPATH_E_SMINPKTLEN | INFINIPATH_E_SPKTLEN | \
+ INFINIPATH_E_INVALIDADDR)
+
+static u64 handle_e_sum_errs(struct ipath_devdata *dd, ipath_err_t errs)
+{
+ unsigned long sbuf[4];
+ u64 ignore_this_time = 0;
+ u32 piobcnt;
+
+ /* if possible that sendbuffererror could be valid */
+ piobcnt = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k;
+ /* read these before writing errorclear */
+ sbuf[0] = ipath_read_kreg64(
+ dd, dd->ipath_kregs->kr_sendbuffererror);
+ sbuf[1] = ipath_read_kreg64(
+ dd, dd->ipath_kregs->kr_sendbuffererror + 1);
+ if (piobcnt > 128) {
+ sbuf[2] = ipath_read_kreg64(
+ dd, dd->ipath_kregs->kr_sendbuffererror + 2);
+ sbuf[3] = ipath_read_kreg64(
+ dd, dd->ipath_kregs->kr_sendbuffererror + 3);
+ }
+
+ if (sbuf[0] || sbuf[1] || (piobcnt > 128 && (sbuf[2] || sbuf[3]))) {
+ int i;
+
+ ipath_cdbg(PKT, "SendbufErrs %lx %lx ", sbuf[0], sbuf[1]);
+ if (ipath_debug & __IPATH_PKTDBG && piobcnt > 128)
+ printk("%lx %lx ", sbuf[2], sbuf[3]);
+ for (i = 0; i < piobcnt; i++) {
+ if (test_bit(i, sbuf)) {
+ u32 __iomem *piobuf;
+ if (i < dd->ipath_piobcnt2k)
+ piobuf = (u32 __iomem *)
+ (dd->ipath_pio2kbase +
+ i * dd->ipath_palign);
+ else
+ piobuf = (u32 __iomem *)
+ (dd->ipath_pio4kbase +
+ (i - dd->ipath_piobcnt2k) *
+ dd->ipath_4kalign);
+
+ ipath_cdbg(PKT,
+ "PIObuf[%u] @%p pbc is %x; ",
+ i, piobuf, readl(piobuf));
+
+ ipath_disarm_piobufs(dd, i, 1);
+ }
+ }
+ if (ipath_debug & __IPATH_PKTDBG)
+ printk("\n");
+ }
+ if ((errs & (INFINIPATH_E_SDROPPEDDATAPKT |
+ INFINIPATH_E_SDROPPEDSMPPKT |
+ INFINIPATH_E_SMINPKTLEN)) &&
+ !(dd->ipath_flags & IPATH_LINKACTIVE)) {
+ /*
+ * This can happen when SMA is trying to bring the link
+ * up, but the IB link changes state at the "wrong" time.
+ * The IB logic then complains that the packet isn't
+ * valid. We don't want to confuse people, so we just
+ * don't print them, except at debug
+ */
+ ipath_dbg("Ignoring pktsend errors %llx, because not "
+ "yet active\n", (unsigned long long) errs);
+ ignore_this_time = INFINIPATH_E_SDROPPEDDATAPKT |
+ INFINIPATH_E_SDROPPEDSMPPKT |
+ INFINIPATH_E_SMINPKTLEN;
+ }
+
+ return ignore_this_time;
+}
+
+/* return the strings for the most common link states */
+static char *ib_linkstate(u32 linkstate)
+{
+ char *ret;
+
+ switch (linkstate) {
+ case IPATH_IBSTATE_INIT:
+ ret = "Init";
+ break;
+ case IPATH_IBSTATE_ARM:
+ ret = "Arm";
+ break;
+ case IPATH_IBSTATE_ACTIVE:
+ ret = "Active";
+ break;
+ default:
+ ret = "Down";
+ }
+
+ return ret;
+}
+
+static void handle_e_ibstatuschanged(struct ipath_devdata *dd,
+ ipath_err_t errs, int noprint)
+{
+ u64 val;
+ u32 ltstate, lstate;
+
+ /*
+ * even if diags are enabled, we want to notice LINKINIT, etc.
+ * We just don't want to change the LED state, or
+ * dd->ipath_kregs->kr_ibcctrl
+ */
+ val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
+ lstate = val & IPATH_IBSTATE_MASK;
+ if (lstate == IPATH_IBSTATE_INIT || lstate == IPATH_IBSTATE_ARM ||
+ lstate == IPATH_IBSTATE_ACTIVE) {
+ /*
+ * only print at SMA if there is a change, debug if not
+ * (sometimes we want to know that, usually not).
+ */
+ if (lstate == ((unsigned) dd->ipath_lastibcstat
+ & IPATH_IBSTATE_MASK)) {
+ ipath_dbg("Status change intr but no change (%s)\n",
+ ib_linkstate(lstate));
+ }
+ else
+ ipath_cdbg(SMA, "Unit %u link state %s, last "
+ "was %s\n", dd->ipath_unit,
+ ib_linkstate(lstate),
+ ib_linkstate((unsigned)
+ dd->ipath_lastibcstat
+ & IPATH_IBSTATE_MASK));
+ }
+ else {
+ lstate = dd->ipath_lastibcstat & IPATH_IBSTATE_MASK;
+ if (lstate == IPATH_IBSTATE_INIT ||
+ lstate == IPATH_IBSTATE_ARM ||
+ lstate == IPATH_IBSTATE_ACTIVE)
+ ipath_cdbg(SMA, "Unit %u link state down"
+ " (state 0x%x), from %s\n",
+ dd->ipath_unit,
+ (u32)val & IPATH_IBSTATE_MASK,
+ ib_linkstate(lstate));
+ else
+ ipath_cdbg(VERBOSE, "Unit %u link state changed "
+ "to 0x%x from down (%x)\n",
+ dd->ipath_unit, (u32) val, lstate);
+ }
+ ltstate = (val >> INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) &
+ INFINIPATH_IBCS_LINKTRAININGSTATE_MASK;
+ lstate = (val >> INFINIPATH_IBCS_LINKSTATE_SHIFT) &
+ INFINIPATH_IBCS_LINKSTATE_MASK;
+
+ if (ltstate == INFINIPATH_IBCS_LT_STATE_POLLACTIVE ||
+ ltstate == INFINIPATH_IBCS_LT_STATE_POLLQUIET) {
+ u32 last_ltstate;
+
+ /*
+ * Ignore cycling back and forth from Polling.Active
+ * to Polling.Quiet while waiting for the other end of
+ * the link to come up. We will cycle back and forth
+ * between them if no cable is plugged in,
+ * the other device is powered off or disabled, etc.
+ */
+ last_ltstate = (dd->ipath_lastibcstat >>
+ INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT)
+ & INFINIPATH_IBCS_LINKTRAININGSTATE_MASK;
+ if (last_ltstate == INFINIPATH_IBCS_LT_STATE_POLLACTIVE
+ || last_ltstate ==
+ INFINIPATH_IBCS_LT_STATE_POLLQUIET) {
+ if (dd->ipath_ibpollcnt > 40) {
+ dd->ipath_flags |= IPATH_NOCABLE;
+ *dd->ipath_statusp |=
+ IPATH_STATUS_IB_NOCABLE;
+ } else
+ dd->ipath_ibpollcnt++;
+ goto skip_ibchange;
+ }
+ }
+ dd->ipath_ibpollcnt = 0; /* some state other than 2 or 3 */
+ ipath_stats.sps_iblink++;
+ if (ltstate != INFINIPATH_IBCS_LT_STATE_LINKUP) {
+ dd->ipath_flags |= IPATH_LINKDOWN;
+ dd->ipath_flags &= ~(IPATH_LINKUNK | IPATH_LINKINIT
+ | IPATH_LINKACTIVE |
+ IPATH_LINKARMED);
+ *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
+ if (!noprint) {
+ if (((dd->ipath_lastibcstat >>
+ INFINIPATH_IBCS_LINKSTATE_SHIFT) &
+ INFINIPATH_IBCS_LINKSTATE_MASK)
+ == INFINIPATH_IBCS_L_STATE_ACTIVE)
+ /* if from up to down be more vocal */
+ ipath_cdbg(SMA,
+ "Unit %u link now down (%s)\n",
+ dd->ipath_unit,
+ ipath_ibcstatus_str[ltstate]);
+ else
+ ipath_cdbg(VERBOSE, "Unit %u link is "
+ "down (%s)\n", dd->ipath_unit,
+ ipath_ibcstatus_str[ltstate]);
+ }
+
+ dd->ipath_f_setextled(dd, lstate, ltstate);
+ } else if ((val & IPATH_IBSTATE_MASK) == IPATH_IBSTATE_ACTIVE) {
+ dd->ipath_flags |= IPATH_LINKACTIVE;
+ dd->ipath_flags &=
+ ~(IPATH_LINKUNK | IPATH_LINKINIT | IPATH_LINKDOWN |
+ IPATH_LINKARMED | IPATH_NOCABLE);
+ *dd->ipath_statusp &= ~IPATH_STATUS_IB_NOCABLE;
+ *dd->ipath_statusp |=
+ IPATH_STATUS_IB_READY | IPATH_STATUS_IB_CONF;
+ dd->ipath_f_setextled(dd, lstate, ltstate);
+
+ __ipath_layer_intr(dd, IPATH_LAYER_INT_IF_UP);
+ } else if ((val & IPATH_IBSTATE_MASK) == IPATH_IBSTATE_INIT) {
+ /*
+ * set INIT and DOWN. Down is checked by most of the other
+ * code, but INIT is useful to know in a few places.
+ */
+ dd->ipath_flags |= IPATH_LINKINIT | IPATH_LINKDOWN;
+ dd->ipath_flags &=
+ ~(IPATH_LINKUNK | IPATH_LINKACTIVE | IPATH_LINKARMED
+ | IPATH_NOCABLE);
+ *dd->ipath_statusp &= ~(IPATH_STATUS_IB_NOCABLE
+ | IPATH_STATUS_IB_READY);
+ dd->ipath_f_setextled(dd, lstate, ltstate);
+ } else if ((val & IPATH_IBSTATE_MASK) == IPATH_IBSTATE_ARM) {
+ dd->ipath_flags |= IPATH_LINKARMED;
+ dd->ipath_flags &=
+ ~(IPATH_LINKUNK | IPATH_LINKDOWN | IPATH_LINKINIT |
+ IPATH_LINKACTIVE | IPATH_NOCABLE);
+ *dd->ipath_statusp &= ~(IPATH_STATUS_IB_NOCABLE
+ | IPATH_STATUS_IB_READY);
+ dd->ipath_f_setextled(dd, lstate, ltstate);
+ } else {
+ if (!noprint)
+ ipath_dbg("IBstatuschange unit %u: %s (%x)\n",
+ dd->ipath_unit,
+ ipath_ibcstatus_str[ltstate], ltstate);
+ }
+skip_ibchange:
+ dd->ipath_lastibcstat = val;
+}
+
+static void handle_supp_msgs(struct ipath_devdata *dd,
+ unsigned supp_msgs, char msg[512])
+{
+ /*
+ * Print the message unless it's ibc status change only, which
+ * happens so often we never want to count it.
+ */
+ if (dd->ipath_lasterror & ~INFINIPATH_E_IBSTATUSCHANGED) {
+ ipath_decode_err(msg, sizeof msg, dd->ipath_lasterror &
+ ~INFINIPATH_E_IBSTATUSCHANGED);
+ if (dd->ipath_lasterror &
+ ~(INFINIPATH_E_RRCVEGRFULL | INFINIPATH_E_RRCVHDRFULL))
+ ipath_dev_err(dd, "Suppressed %u messages for "
+ "fast-repeating errors (%s) (%llx)\n",
+ supp_msgs, msg,
+ (unsigned long long)
+ dd->ipath_lasterror);
+ else {
+ /*
+ * rcvegrfull and rcvhdrqfull are "normal", for some
+ * types of processes (mostly benchmarks) that send
+ * huge numbers of messages, while not processing
+ * them. So only complain about these at debug
+ * level.
+ */
+ ipath_dbg("Suppressed %u messages for %s\n",
+ supp_msgs, msg);
+ }
+ }
+}
+
+static unsigned handle_frequent_errors(struct ipath_devdata *dd,
+ ipath_err_t errs, char msg[512],
+ int *noprint)
+{
+ unsigned long nc;
+ static unsigned long nextmsg_time;
+ static unsigned nmsgs, supp_msgs;
+
+ /*
+ * Throttle back "fast" messages to no more than 10 per 5 seconds.
+ * This isn't perfect, but it's a reasonable heuristic. If we get
+ * more than 10, give a 6x longer delay.
+ */
+ nc = jiffies;
+ if (nmsgs > 10) {
+ if (time_before(nc, nextmsg_time)) {
+ *noprint = 1;
+ if (!supp_msgs++)
+ nextmsg_time = nc + HZ * 3;
+ }
+ else if (supp_msgs) {
+ handle_supp_msgs(dd, supp_msgs, msg);
+ supp_msgs = 0;
+ nmsgs = 0;
+ }
+ }
+ else if (!nmsgs++ || time_after(nc, nextmsg_time))
+ nextmsg_time = nc + HZ / 2;
+
+ return supp_msgs;
+}
+
+static void handle_errors(struct ipath_devdata *dd, ipath_err_t errs)
+{
+ char msg[512];
+ u64 ignore_this_time = 0;
+ int i;
+ int chkerrpkts = 0, noprint = 0;
+ unsigned supp_msgs;
+
+ supp_msgs = handle_frequent_errors(dd, errs, msg, &noprint);
+
+ /*
+ * don't report errors that are masked (includes those always
+ * ignored)
+ */
+ errs &= ~dd->ipath_maskederrs;
+
+ /* do these first, they are most important */
+ if (errs & INFINIPATH_E_HARDWARE) {
+ /* reuse same msg buf */
+ dd->ipath_f_handle_hwerrors(dd, msg, sizeof msg);
+ }
+
+ if (!noprint && (errs & ~infinipath_e_bitsextant))
+ ipath_dev_err(dd, "error interrupt with unknown errors "
+ "%llx set\n", (unsigned long long)
+ (errs & ~infinipath_e_bitsextant));
+
+ if (errs & E_SUM_ERRS)
+ ignore_this_time = handle_e_sum_errs(dd, errs);
+
+ if (supp_msgs == 250000) {
+ /*
+ * It's not entirely reasonable assuming that the errors set
+ * in the last clear period are all responsible for the
+ * problem, but the alternative is to assume it's the only
+ * ones on this particular interrupt, which also isn't great
+ */
+ dd->ipath_maskederrs |= dd->ipath_lasterror | errs;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
+ ~dd->ipath_maskederrs);
+ ipath_decode_err(msg, sizeof msg,
+ (dd->ipath_maskederrs & ~dd->
+ ipath_ignorederrs));
+
+ if ((dd->ipath_maskederrs & ~dd->ipath_ignorederrs) &
+ ~(INFINIPATH_E_RRCVEGRFULL | INFINIPATH_E_RRCVHDRFULL))
+ ipath_dev_err(dd, "Disabling error(s) %llx because "
+ "occuring too frequently (%s)\n",
+ (unsigned long long)
+ (dd->ipath_maskederrs &
+ ~dd->ipath_ignorederrs), msg);
+ else {
+ /*
+ * rcvegrfull and rcvhdrqfull are "normal",
+ * for some types of processes (mostly benchmarks)
+ * that send huge numbers of messages, while not
+ * processing them. So only complain about
+ * these at debug level.
+ */
+ ipath_dbg("Disabling frequent queue full errors "
+ "(%s)\n", msg);
+ }
+
+ /*
+ * Re-enable the masked errors after around 3 minutes. in
+ * ipath_get_faststats(). If we have a series of fast
+ * repeating but different errors, the interval will keep
+ * stretching out, but that's OK, as that's pretty
+ * catastrophic.
+ */
+ dd->ipath_unmasktime = jiffies + HZ * 180;
+ }
+
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear, errs);
+ if (ignore_this_time)
+ errs &= ~ignore_this_time;
+ if (errs & ~dd->ipath_lasterror) {
+ errs &= ~dd->ipath_lasterror;
+ /* never suppress duplicate hwerrors or ibstatuschange */
+ dd->ipath_lasterror |= errs &
+ ~(INFINIPATH_E_HARDWARE |
+ INFINIPATH_E_IBSTATUSCHANGED);
+ }
+ if (!errs)
+ return;
+
+ if (!noprint)
+ /*
+ * the ones we mask off are handled specially below or above
+ */
+ ipath_decode_err(msg, sizeof msg,
+ errs & ~(INFINIPATH_E_IBSTATUSCHANGED |
+ INFINIPATH_E_RRCVEGRFULL |
+ INFINIPATH_E_RRCVHDRFULL |
+ INFINIPATH_E_HARDWARE));
+ else
+ /* so we don't need if (!noprint) at strlcat's below */
+ *msg = 0;
+
+ if (errs & E_SUM_PKTERRS) {
+ ipath_stats.sps_pkterrs++;
+ chkerrpkts = 1;
+ }
+ if (errs & E_SUM_ERRS)
+ ipath_stats.sps_errs++;
+
+ if (errs & (INFINIPATH_E_RICRC | INFINIPATH_E_RVCRC)) {
+ ipath_stats.sps_crcerrs++;
+ chkerrpkts = 1;
+ }
+
+ /*
+ * We don't want to print these two as they happen, or we can make
+ * the situation even worse, because it takes so long to print
+ * messages to serial consoles. Kernel ports get printed from
+ * fast_stats, no more than every 5 seconds, user ports get printed
+ * on close
+ */
+ if (errs & INFINIPATH_E_RRCVHDRFULL) {
+ int any;
+ u32 hd, tl;
+ ipath_stats.sps_hdrqfull++;
+ for (any = i = 0; i < dd->ipath_cfgports; i++) {
+ struct ipath_portdata *pd = dd->ipath_pd[i];
+ if (i == 0) {
+ hd = dd->ipath_port0head;
+ tl = (u32) le64_to_cpu(
+ *dd->ipath_hdrqtailptr);
+ } else if (pd && pd->port_cnt &&
+ pd->port_rcvhdrtail_kvaddr) {
+ /*
+ * don't report same point multiple times,
+ * except kernel
+ */
+ tl = (u32) * pd->port_rcvhdrtail_kvaddr;
+ if (tl == dd->ipath_lastrcvhdrqtails[i])
+ continue;
+ hd = ipath_read_ureg32(dd, ur_rcvhdrhead,
+ i);
+ } else
+ continue;
+ if (hd == (tl + 1) ||
+ (!hd && tl == dd->ipath_hdrqlast)) {
+ dd->ipath_lastrcvhdrqtails[i] = tl;
+ pd->port_hdrqfull++;
+ if (i == 0)
+ chkerrpkts = 1;
+ }
+ }
+ }
+ if (errs & INFINIPATH_E_RRCVEGRFULL) {
+ /*
+ * since this is of less importance and not likely to
+ * happen without also getting hdrfull, only count
+ * occurrences; don't check each port (or even the kernel
+ * vs user)
+ */
+ ipath_stats.sps_etidfull++;
+ if (dd->ipath_port0head !=
+ (u32) le64_to_cpu(*dd->ipath_hdrqtailptr))
+ chkerrpkts = 1;
+ }
+
+ /*
+ * do this before IBSTATUSCHANGED, in case both bits set in a single
+ * interrupt; we want the STATUSCHANGE to "win", so we do our
+ * internal copy of state machine correctly
+ */
+ if (errs & INFINIPATH_E_RIBLOSTLINK) {
+ /*
+ * force through block below
+ */
+ errs |= INFINIPATH_E_IBSTATUSCHANGED;
+ ipath_stats.sps_iblink++;
+ dd->ipath_flags |= IPATH_LINKDOWN;
+ dd->ipath_flags &= ~(IPATH_LINKUNK | IPATH_LINKINIT
+ | IPATH_LINKARMED | IPATH_LINKACTIVE);
+ *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
+ if (!noprint) {
+ u64 st = ipath_read_kreg64(
+ dd, dd->ipath_kregs->kr_ibcstatus);
+
+ ipath_dbg("Lost link, link now down (%s)\n",
+ ipath_ibcstatus_str[st & 0xf]);
+ }
+ }
+ if (errs & INFINIPATH_E_IBSTATUSCHANGED)
+ handle_e_ibstatuschanged(dd, errs, noprint);
+
+ if (errs & INFINIPATH_E_RESET) {
+ if (!noprint)
+ ipath_dev_err(dd, "Got reset, requires re-init "
+ "(unload and reload driver)\n");
+ dd->ipath_flags &= ~IPATH_INITTED; /* needs re-init */
+ /* mark as having had error */
+ *dd->ipath_statusp |= IPATH_STATUS_HWERROR;
+ *dd->ipath_statusp &= ~IPATH_STATUS_IB_CONF;
+ }
+
+ if (!noprint && *msg)
+ ipath_dev_err(dd, "%s error\n", msg);
+ if (dd->ipath_sma_state_wanted & dd->ipath_flags) {
+ ipath_cdbg(VERBOSE, "sma wanted state %x, iflags now %x, "
+ "waking\n", dd->ipath_sma_state_wanted,
+ dd->ipath_flags);
+ wake_up_interruptible(&ipath_sma_state_wait);
+ }
+
+ if (chkerrpkts)
+ /* process possible error packets in hdrq */
+ ipath_kreceive(dd);
+}
+
+/* this is separate to allow for better optimization of ipath_intr() */
+
+static void ipath_bad_intr(struct ipath_devdata *dd, u32 * unexpectp)
+{
+ /*
+ * sometimes happen during driver init and unload, don't want
+ * to process any interrupts at that point
+ */
+
+ /* this is just a bandaid, not a fix, if something goes badly
+ * wrong */
+ if (++*unexpectp > 100) {
+ if (++*unexpectp > 105) {
+ /*
+ * ok, we must be taking somebody else's interrupts,
+ * due to a messed up mptable and/or PIRQ table, so
+ * unregister the interrupt. We've seen this during
+ * linuxbios development work, and it may happen in
+ * the future again.
+ */
+ if (dd->pcidev && dd->pcidev->irq) {
+ ipath_dev_err(dd, "Now %u unexpected "
+ "interrupts, unregistering "
+ "interrupt handler\n",
+ *unexpectp);
+ ipath_dbg("free_irq of irq %x\n",
+ dd->pcidev->irq);
+ free_irq(dd->pcidev->irq, dd);
+ }
+ }
+ if (ipath_read_kreg32(dd, dd->ipath_kregs->kr_intmask)) {
+ ipath_dev_err(dd, "%u unexpected interrupts, "
+ "disabling interrupts completely\n",
+ *unexpectp);
+ /*
+ * disable all interrupts, something is very wrong
+ */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask,
+ 0ULL);
+ }
+ } else if (*unexpectp > 1)
+ ipath_dbg("Interrupt when not ready, should not happen, "
+ "ignoring\n");
+}
+
+static void ipath_bad_regread(struct ipath_devdata *dd)
+{
+ static int allbits;
+
+ /* separate routine, for better optimization of ipath_intr() */
+
+ /*
+ * We print the message and disable interrupts, in hope of
+ * having a better chance of debugging the problem.
+ */
+ ipath_dev_err(dd,
+ "Read of interrupt status failed (all bits set)\n");
+ if (allbits++) {
+ /* disable all interrupts, something is very wrong */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, 0ULL);
+ if (allbits == 2) {
+ ipath_dev_err(dd, "Still bad interrupt status, "
+ "unregistering interrupt\n");
+ free_irq(dd->pcidev->irq, dd);
+ } else if (allbits > 2) {
+ if ((allbits % 10000) == 0)
+ printk(".");
+ } else
+ ipath_dev_err(dd, "Disabling interrupts, "
+ "multiple errors\n");
+ }
+}
+
+static void handle_port_pioavail(struct ipath_devdata *dd)
+{
+ u32 i;
+ /*
+ * start from port 1, since for now port 0 is never using
+ * wait_event for PIO
+ */
+ for (i = 1; dd->ipath_portpiowait && i < dd->ipath_cfgports; i++) {
+ struct ipath_portdata *pd = dd->ipath_pd[i];
+
+ if (pd && pd->port_cnt &&
+ dd->ipath_portpiowait & (1U << i)) {
+ clear_bit(i, &dd->ipath_portpiowait);
+ if (test_bit(IPATH_PORT_WAITING_PIO,
+ &pd->port_flag)) {
+ clear_bit(IPATH_PORT_WAITING_PIO,
+ &pd->port_flag);
+ wake_up_interruptible(&pd->port_wait);
+ }
+ }
+ }
+}
+
+static void handle_layer_pioavail(struct ipath_devdata *dd)
+{
+ int ret;
+
+ ret = __ipath_layer_intr(dd, IPATH_LAYER_INT_SEND_CONTINUE);
+ if (ret > 0)
+ goto clear;
+
+ ret = __ipath_verbs_piobufavail(dd);
+ if (ret > 0)
+ goto clear;
+
+ return;
+clear:
+ set_bit(IPATH_S_PIOINTBUFAVAIL, &dd->ipath_sendctrl);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ dd->ipath_sendctrl);
+}
+
+static void handle_rcv(struct ipath_devdata *dd, u32 istat)
+{
+ u64 portr;
+ int i;
+ int rcvdint = 0;
+
+ portr = ((istat >> INFINIPATH_I_RCVAVAIL_SHIFT) &
+ infinipath_i_rcvavail_mask)
+ | ((istat >> INFINIPATH_I_RCVURG_SHIFT) &
+ infinipath_i_rcvurg_mask);
+ for (i = 0; i < dd->ipath_cfgports; i++) {
+ struct ipath_portdata *pd = dd->ipath_pd[i];
+ if (portr & (1 << i) && pd &&
+ pd->port_cnt) {
+ if (i == 0)
+ ipath_kreceive(dd);
+ else if (test_bit(IPATH_PORT_WAITING_RCV,
+ &pd->port_flag)) {
+ int rcbit;
+ clear_bit(IPATH_PORT_WAITING_RCV,
+ &pd->port_flag);
+ rcbit = i + INFINIPATH_R_INTRAVAIL_SHIFT;
+ clear_bit(1UL << rcbit, &dd->ipath_rcvctrl);
+ wake_up_interruptible(&pd->port_wait);
+ rcvdint = 1;
+ }
+ }
+ }
+ if (rcvdint) {
+ /* only want to take one interrupt, so turn off the rcv
+ * interrupt for all the ports that we did the wakeup on
+ * (but never for kernel port)
+ */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
+ dd->ipath_rcvctrl);
+ }
+}
+
+irqreturn_t ipath_intr(int irq, void *data, struct pt_regs *regs)
+{
+ struct ipath_devdata *dd = data;
+ u32 istat = ipath_read_kreg32(dd, dd->ipath_kregs->kr_intstatus);
+ ipath_err_t estat = 0;
+ static unsigned unexpected = 0;
+ irqreturn_t ret;
+
+ if (unlikely(!istat)) {
+ ipath_stats.sps_nullintr++;
+ ret = IRQ_NONE; /* not our interrupt, or already handled */
+ goto bail;
+ }
+ if (unlikely(istat == -1)) {
+ ipath_bad_regread(dd);
+ /* don't know if it was our interrupt or not */
+ ret = IRQ_NONE;
+ goto bail;
+ }
+
+ ipath_stats.sps_ints++;
+
+ /*
+ * this needs to be flags&initted, not statusp, so we keep
+ * taking interrupts even after link goes down, etc.
+ * Also, we *must* clear the interrupt at some point, or we won't
+ * take it again, which can be real bad for errors, etc...
+ */
+
+ if (!(dd->ipath_flags & IPATH_INITTED)) {
+ ipath_bad_intr(dd, &unexpected);
+ ret = IRQ_NONE;
+ goto bail;
+ }
+ if (unexpected)
+ unexpected = 0;
+
+ ipath_cdbg(VERBOSE, "intr stat=0x%x\n", istat);
+
+ if (istat & ~infinipath_i_bitsextant)
+ ipath_dev_err(dd,
+ "interrupt with unknown interrupts %x set\n",
+ istat & (u32) ~ infinipath_i_bitsextant);
+
+ if (istat & INFINIPATH_I_ERROR) {
+ ipath_stats.sps_errints++;
+ estat = ipath_read_kreg64(dd,
+ dd->ipath_kregs->kr_errorstatus);
+ if (!estat)
+ dev_info(&dd->pcidev->dev, "error interrupt (%x), "
+ "but no error bits set!\n", istat);
+ else if (estat == -1LL)
+ /*
+ * should we try clearing all, or hope next read
+ * works?
+ */
+ ipath_dev_err(dd, "Read of error status failed "
+ "(all bits set); ignoring\n");
+ else
+ handle_errors(dd, estat);
+ }
+
+ if (istat & INFINIPATH_I_GPIO) {
+ if (unlikely(!(dd->ipath_flags & IPATH_GPIO_INTR))) {
+ u32 gpiostatus;
+ gpiostatus = ipath_read_kreg32(
+ dd, dd->ipath_kregs->kr_gpio_status);
+ ipath_dbg("Unexpected GPIO interrupt bits %x\n",
+ gpiostatus);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_clear,
+ gpiostatus);
+ }
+ else {
+ /* Clear GPIO status bit 2 */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_clear,
+ (u64) (1 << 2));
+
+ /*
+ * Packets are available in the port 0 rcv queue.
+ * Eventually this needs to be generalized to check
+ * IPATH_GPIO_INTR, and the specific GPIO bit, if
+ * GPIO interrupts are used for anything else.
+ */
+ ipath_kreceive(dd);
+ }
+ }
+
+ /*
+ * clear the ones we will deal with on this round
+ * We clear it early, mostly for receive interrupts, so we
+ * know the chip will have seen this by the time we process
+ * the queue, and will re-interrupt if necessary. The processor
+ * itself won't take the interrupt again until we return.
+ */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, istat);
+
+ if (istat & INFINIPATH_I_SPIOBUFAVAIL) {
+ clear_bit(IPATH_S_PIOINTBUFAVAIL, &dd->ipath_sendctrl);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ dd->ipath_sendctrl);
+
+ if (dd->ipath_portpiowait)
+ handle_port_pioavail(dd);
+
+ handle_layer_pioavail(dd);
+ }
+
+ /*
+ * we check for both transition from empty to non-empty, and urgent
+ * packets (those with the interrupt bit set in the header)
+ */
+
+ if (istat & ((infinipath_i_rcvavail_mask <<
+ INFINIPATH_I_RCVAVAIL_SHIFT)
+ | (infinipath_i_rcvurg_mask <<
+ INFINIPATH_I_RCVURG_SHIFT)))
+ handle_rcv(dd, istat);
+
+ ret = IRQ_HANDLED;
+
+bail:
+ return ret;
+}
diff --git a/drivers/infiniband/hw/ipath/ipath_stats.c b/drivers/infiniband/hw/ipath/ipath_stats.c
new file mode 100644
index 00000000000..fe209137ee7
--- /dev/null
+++ b/drivers/infiniband/hw/ipath/ipath_stats.c
@@ -0,0 +1,303 @@
+/*
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/pci.h>
+
+#include "ipath_kernel.h"
+
+struct infinipath_stats ipath_stats;
+
+/**
+ * ipath_snap_cntr - snapshot a chip counter
+ * @dd: the infinipath device
+ * @creg: the counter to snapshot
+ *
+ * called from add_timer and user counter read calls, to deal with
+ * counters that wrap in "human time". The words sent and received, and
+ * the packets sent and received are all that we worry about. For now,
+ * at least, we don't worry about error counters, because if they wrap
+ * that quickly, we probably don't care. We may eventually just make this
+ * handle all the counters. word counters can wrap in about 20 seconds
+ * of full bandwidth traffic, packet counters in a few hours.
+ */
+
+u64 ipath_snap_cntr(struct ipath_devdata *dd, ipath_creg creg)
+{
+ u32 val, reg64 = 0;
+ u64 val64;
+ unsigned long t0, t1;
+ u64 ret;
+
+ t0 = jiffies;
+ /* If fast increment counters are only 32 bits, snapshot them,
+ * and maintain them as 64bit values in the driver */
+ if (!(dd->ipath_flags & IPATH_32BITCOUNTERS) &&
+ (creg == dd->ipath_cregs->cr_wordsendcnt ||
+ creg == dd->ipath_cregs->cr_wordrcvcnt ||
+ creg == dd->ipath_cregs->cr_pktsendcnt ||
+ creg == dd->ipath_cregs->cr_pktrcvcnt)) {
+ val64 = ipath_read_creg(dd, creg);
+ val = val64 == ~0ULL ? ~0U : 0;
+ reg64 = 1;
+ } else /* val64 just to keep gcc quiet... */
+ val64 = val = ipath_read_creg32(dd, creg);
+ /*
+ * See if a second has passed. This is just a way to detect things
+ * that are quite broken. Normally this should take just a few
+ * cycles (the check is for long enough that we don't care if we get
+ * pre-empted.) An Opteron HT O read timeout is 4 seconds with
+ * normal NB values
+ */
+ t1 = jiffies;
+ if (time_before(t0 + HZ, t1) && val == -1) {
+ ipath_dev_err(dd, "Error! Read counter 0x%x timed out\n",
+ creg);
+ ret = 0ULL;
+ goto bail;
+ }
+ if (reg64) {
+ ret = val64;
+ goto bail;
+ }
+
+ if (creg == dd->ipath_cregs->cr_wordsendcnt) {
+ if (val != dd->ipath_lastsword) {
+ dd->ipath_sword += val - dd->ipath_lastsword;
+ dd->ipath_lastsword = val;
+ }
+ val64 = dd->ipath_sword;
+ } else if (creg == dd->ipath_cregs->cr_wordrcvcnt) {
+ if (val != dd->ipath_lastrword) {
+ dd->ipath_rword += val - dd->ipath_lastrword;
+ dd->ipath_lastrword = val;
+ }
+ val64 = dd->ipath_rword;
+ } else if (creg == dd->ipath_cregs->cr_pktsendcnt) {
+ if (val != dd->ipath_lastspkts) {
+ dd->ipath_spkts += val - dd->ipath_lastspkts;
+ dd->ipath_lastspkts = val;
+ }
+ val64 = dd->ipath_spkts;
+ } else if (creg == dd->ipath_cregs->cr_pktrcvcnt) {
+ if (val != dd->ipath_lastrpkts) {
+ dd->ipath_rpkts += val - dd->ipath_lastrpkts;
+ dd->ipath_lastrpkts = val;
+ }
+ val64 = dd->ipath_rpkts;
+ } else
+ val64 = (u64) val;
+
+ ret = val64;
+
+bail:
+ return ret;
+}
+
+/**
+ * ipath_qcheck - print delta of egrfull/hdrqfull errors for kernel ports
+ * @dd: the infinipath device
+ *
+ * print the delta of egrfull/hdrqfull errors for kernel ports no more than
+ * every 5 seconds. User processes are printed at close, but kernel doesn't
+ * close, so... Separate routine so may call from other places someday, and
+ * so function name when printed by _IPATH_INFO is meaningfull
+ */
+static void ipath_qcheck(struct ipath_devdata *dd)
+{
+ static u64 last_tot_hdrqfull;
+ size_t blen = 0;
+ char buf[128];
+
+ *buf = 0;
+ if (dd->ipath_pd[0]->port_hdrqfull != dd->ipath_p0_hdrqfull) {
+ blen = snprintf(buf, sizeof buf, "port 0 hdrqfull %u",
+ dd->ipath_pd[0]->port_hdrqfull -
+ dd->ipath_p0_hdrqfull);
+ dd->ipath_p0_hdrqfull = dd->ipath_pd[0]->port_hdrqfull;
+ }
+ if (ipath_stats.sps_etidfull != dd->ipath_last_tidfull) {
+ blen += snprintf(buf + blen, sizeof buf - blen,
+ "%srcvegrfull %llu",
+ blen ? ", " : "",
+ (unsigned long long)
+ (ipath_stats.sps_etidfull -
+ dd->ipath_last_tidfull));
+ dd->ipath_last_tidfull = ipath_stats.sps_etidfull;
+ }
+
+ /*
+ * this is actually the number of hdrq full interrupts, not actual
+ * events, but at the moment that's mostly what I'm interested in.
+ * Actual count, etc. is in the counters, if needed. For production
+ * users this won't ordinarily be printed.
+ */
+
+ if ((ipath_debug & (__IPATH_PKTDBG | __IPATH_DBG)) &&
+ ipath_stats.sps_hdrqfull != last_tot_hdrqfull) {
+ blen += snprintf(buf + blen, sizeof buf - blen,
+ "%shdrqfull %llu (all ports)",
+ blen ? ", " : "",
+ (unsigned long long)
+ (ipath_stats.sps_hdrqfull -
+ last_tot_hdrqfull));
+ last_tot_hdrqfull = ipath_stats.sps_hdrqfull;
+ }
+ if (blen)
+ ipath_dbg("%s\n", buf);
+
+ if (dd->ipath_port0head != (u32)
+ le64_to_cpu(*dd->ipath_hdrqtailptr)) {
+ if (dd->ipath_lastport0rcv_cnt ==
+ ipath_stats.sps_port0pkts) {
+ ipath_cdbg(PKT, "missing rcv interrupts? "
+ "port0 hd=%llx tl=%x; port0pkts %llx\n",
+ (unsigned long long)
+ le64_to_cpu(*dd->ipath_hdrqtailptr),
+ dd->ipath_port0head,
+ (unsigned long long)
+ ipath_stats.sps_port0pkts);
+ ipath_kreceive(dd);
+ }
+ dd->ipath_lastport0rcv_cnt = ipath_stats.sps_port0pkts;
+ }
+}
+
+/**
+ * ipath_get_faststats - get word counters from chip before they overflow
+ * @opaque - contains a pointer to the infinipath device ipath_devdata
+ *
+ * called from add_timer
+ */
+void ipath_get_faststats(unsigned long opaque)
+{
+ struct ipath_devdata *dd = (struct ipath_devdata *) opaque;
+ u32 val;
+ static unsigned cnt;
+
+ /*
+ * don't access the chip while running diags, or memory diags can
+ * fail
+ */
+ if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT) ||
+ ipath_diag_inuse)
+ /* but re-arm the timer, for diags case; won't hurt other */
+ goto done;
+
+ if (dd->ipath_flags & IPATH_32BITCOUNTERS) {
+ ipath_snap_cntr(dd, dd->ipath_cregs->cr_wordsendcnt);
+ ipath_snap_cntr(dd, dd->ipath_cregs->cr_wordrcvcnt);
+ ipath_snap_cntr(dd, dd->ipath_cregs->cr_pktsendcnt);
+ ipath_snap_cntr(dd, dd->ipath_cregs->cr_pktrcvcnt);
+ }
+
+ ipath_qcheck(dd);
+
+ /*
+ * deal with repeat error suppression. Doesn't really matter if
+ * last error was almost a full interval ago, or just a few usecs
+ * ago; still won't get more than 2 per interval. We may want
+ * longer intervals for this eventually, could do with mod, counter
+ * or separate timer. Also see code in ipath_handle_errors() and
+ * ipath_handle_hwerrors().
+ */
+
+ if (dd->ipath_lasterror)
+ dd->ipath_lasterror = 0;
+ if (dd->ipath_lasthwerror)
+ dd->ipath_lasthwerror = 0;
+ if ((dd->ipath_maskederrs & ~dd->ipath_ignorederrs)
+ && time_after(jiffies, dd->ipath_unmasktime)) {
+ char ebuf[256];
+ ipath_decode_err(ebuf, sizeof ebuf,
+ (dd->ipath_maskederrs & ~dd->
+ ipath_ignorederrs));
+ if ((dd->ipath_maskederrs & ~dd->ipath_ignorederrs) &
+ ~(INFINIPATH_E_RRCVEGRFULL | INFINIPATH_E_RRCVHDRFULL))
+ ipath_dev_err(dd, "Re-enabling masked errors "
+ "(%s)\n", ebuf);
+ else {
+ /*
+ * rcvegrfull and rcvhdrqfull are "normal", for some
+ * types of processes (mostly benchmarks) that send
+ * huge numbers of messages, while not processing
+ * them. So only complain about these at debug
+ * level.
+ */
+ ipath_dbg("Disabling frequent queue full errors "
+ "(%s)\n", ebuf);
+ }
+ dd->ipath_maskederrs = dd->ipath_ignorederrs;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
+ ~dd->ipath_maskederrs);
+ }
+
+ /* limit qfull messages to ~one per minute per port */
+ if ((++cnt & 0x10)) {
+ for (val = dd->ipath_cfgports - 1; ((int)val) >= 0;
+ val--) {
+ if (dd->ipath_lastegrheads[val] != -1)
+ dd->ipath_lastegrheads[val] = -1;
+ if (dd->ipath_lastrcvhdrqtails[val] != -1)
+ dd->ipath_lastrcvhdrqtails[val] = -1;
+ }
+ }
+
+ if (dd->ipath_nosma_bufs) {
+ dd->ipath_nosma_secs += 5;
+ if (dd->ipath_nosma_secs >= 30) {
+ ipath_cdbg(SMA, "No SMA bufs avail %u seconds; "
+ "cancelling pending sends\n",
+ dd->ipath_nosma_secs);
+ /*
+ * issue an abort as well, in case we have a packet
+ * stuck in launch fifo. This could corrupt an
+ * outgoing user packet in the worst case,
+ * but this is a pretty catastrophic, anyway.
+ */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ INFINIPATH_S_ABORT);
+ ipath_disarm_piobufs(dd, dd->ipath_lastport_piobuf,
+ dd->ipath_piobcnt2k +
+ dd->ipath_piobcnt4k -
+ dd->ipath_lastport_piobuf);
+ /* start again, if necessary */
+ dd->ipath_nosma_secs = 0;
+ } else
+ ipath_cdbg(SMA, "No SMA bufs avail %u tries, "
+ "after %u seconds\n",
+ dd->ipath_nosma_bufs,
+ dd->ipath_nosma_secs);
+ }
+
+done:
+ mod_timer(&dd->ipath_stats_timer, jiffies + HZ * 5);
+}
diff --git a/drivers/infiniband/hw/ipath/ipath_wc_x86_64.c b/drivers/infiniband/hw/ipath/ipath_wc_x86_64.c
new file mode 100644
index 00000000000..adc5322f15c
--- /dev/null
+++ b/drivers/infiniband/hw/ipath/ipath_wc_x86_64.c
@@ -0,0 +1,157 @@
+/*
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/*
+ * This file is conditionally built on x86_64 only. Otherwise weak symbol
+ * versions of the functions exported from here are used.
+ */
+
+#include <linux/pci.h>
+#include <asm/mtrr.h>
+#include <asm/processor.h>
+
+#include "ipath_kernel.h"
+
+/**
+ * ipath_enable_wc - enable write combining for MMIO writes to the device
+ * @dd: infinipath device
+ *
+ * This routine is x86_64-specific; it twiddles the CPU's MTRRs to enable
+ * write combining.
+ */
+int ipath_enable_wc(struct ipath_devdata *dd)
+{
+ int ret = 0;
+ u64 pioaddr, piolen;
+ unsigned bits;
+ const unsigned long addr = pci_resource_start(dd->pcidev, 0);
+ const size_t len = pci_resource_len(dd->pcidev, 0);
+
+ /*
+ * Set the PIO buffers to be WCCOMB, so we get HT bursts to the
+ * chip. Linux (possibly the hardware) requires it to be on a power
+ * of 2 address matching the length (which has to be a power of 2).
+ * For rev1, that means the base address, for rev2, it will be just
+ * the PIO buffers themselves.
+ */
+ pioaddr = addr + dd->ipath_piobufbase;
+ piolen = (dd->ipath_piobcnt2k +
+ dd->ipath_piobcnt4k) *
+ ALIGN(dd->ipath_piobcnt2k +
+ dd->ipath_piobcnt4k, dd->ipath_palign);
+
+ for (bits = 0; !(piolen & (1ULL << bits)); bits++)
+ /* do nothing */ ;
+
+ if (piolen != (1ULL << bits)) {
+ piolen >>= bits;
+ while (piolen >>= 1)
+ bits++;
+ piolen = 1ULL << (bits + 1);
+ }
+ if (pioaddr & (piolen - 1)) {
+ u64 atmp;
+ ipath_dbg("pioaddr %llx not on right boundary for size "
+ "%llx, fixing\n",
+ (unsigned long long) pioaddr,
+ (unsigned long long) piolen);
+ atmp = pioaddr & ~(piolen - 1);
+ if (atmp < addr || (atmp + piolen) > (addr + len)) {
+ ipath_dev_err(dd, "No way to align address/size "
+ "(%llx/%llx), no WC mtrr\n",
+ (unsigned long long) atmp,
+ (unsigned long long) piolen << 1);
+ ret = -ENODEV;
+ } else {
+ ipath_dbg("changing WC base from %llx to %llx, "
+ "len from %llx to %llx\n",
+ (unsigned long long) pioaddr,
+ (unsigned long long) atmp,
+ (unsigned long long) piolen,
+ (unsigned long long) piolen << 1);
+ pioaddr = atmp;
+ piolen <<= 1;
+ }
+ }
+
+ if (!ret) {
+ int cookie;
+ ipath_cdbg(VERBOSE, "Setting mtrr for chip to WC "
+ "(addr %llx, len=0x%llx)\n",
+ (unsigned long long) pioaddr,
+ (unsigned long long) piolen);
+ cookie = mtrr_add(pioaddr, piolen, MTRR_TYPE_WRCOMB, 0);
+ if (cookie < 0) {
+ {
+ dev_info(&dd->pcidev->dev,
+ "mtrr_add() WC for PIO bufs "
+ "failed (%d)\n",
+ cookie);
+ ret = -EINVAL;
+ }
+ } else {
+ ipath_cdbg(VERBOSE, "Set mtrr for chip to WC, "
+ "cookie is %d\n", cookie);
+ dd->ipath_wc_cookie = cookie;
+ }
+ }
+
+ return ret;
+}
+
+/**
+ * ipath_disable_wc - disable write combining for MMIO writes to the device
+ * @dd: infinipath device
+ */
+void ipath_disable_wc(struct ipath_devdata *dd)
+{
+ if (dd->ipath_wc_cookie) {
+ ipath_cdbg(VERBOSE, "undoing WCCOMB on pio buffers\n");
+ mtrr_del(dd->ipath_wc_cookie, 0, 0);
+ dd->ipath_wc_cookie = 0;
+ }
+}
+
+/**
+ * ipath_unordered_wc - indicate whether write combining is ordered
+ *
+ * Because our performance depends on our ability to do write combining mmio
+ * writes in the most efficient way, we need to know if we are on an Intel
+ * or AMD x86_64 processor. AMD x86_64 processors flush WC buffers out in
+ * the order completed, and so no special flushing is required to get
+ * correct ordering. Intel processors, however, will flush write buffers
+ * out in "random" orders, and so explicit ordering is needed at times.
+ */
+int ipath_unordered_wc(void)
+{
+ return boot_cpu_data.x86_vendor != X86_VENDOR_AMD;
+}