diff options
Diffstat (limited to 'drivers/input/keyboard/Kconfig')
| -rw-r--r-- | drivers/input/keyboard/Kconfig | 185 |
1 files changed, 185 insertions, 0 deletions
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig new file mode 100644 index 00000000000..e55dee39077 --- /dev/null +++ b/drivers/input/keyboard/Kconfig @@ -0,0 +1,185 @@ +# +# Input core configuration +# +menuconfig INPUT_KEYBOARD + bool "Keyboards" if EMBEDDED || !X86 + default y + help + Say Y here, and a list of supported keyboards will be displayed. + This option doesn't affect the kernel. + + If unsure, say Y. + +if INPUT_KEYBOARD + +config KEYBOARD_ATKBD + tristate "AT keyboard" if !PC + default y + select SERIO + select SERIO_LIBPS2 + select SERIO_I8042 if PC + select SERIO_GSCPS2 if GSC + help + Say Y here if you want to use a standard AT or PS/2 keyboard. Usually + you'll need this, unless you have a different type keyboard (USB, ADB + or other). This also works for AT and PS/2 keyboards connected over a + PS/2 to serial converter. + + If unsure, say Y. + + To compile this driver as a module, choose M here: the + module will be called atkbd. + +config KEYBOARD_ATKBD_HP_KEYCODES + bool "Use HP keyboard scancodes" + depends on PARISC && KEYBOARD_ATKBD + default y + help + Say Y here if you have a PA-RISC machine and want to use an AT or + PS/2 keyboard, and your keyboard uses keycodes that are specific to + PA-RISC keyboards. + + Say N if you use a standard keyboard. + +config KEYBOARD_ATKBD_RDI_KEYCODES + bool "Use PrecisionBook keyboard scancodes" + depends on KEYBOARD_ATKBD_HP_KEYCODES + default n + help + If you have an RDI PrecisionBook, say Y here if you want to use its + built-in keyboard (as opposed to an external keyboard). + + The PrecisionBook has five keys that conflict with those used by most + AT and PS/2 keyboards. These are as follows: + + PrecisionBook Standard AT or PS/2 + + F1 F12 + Left Ctrl Left Alt + Caps Lock Left Ctrl + Right Ctrl Caps Lock + Left 102nd key (the key to the right of Left Shift) + + If you say N here, and use the PrecisionBook keyboard, then each key + in the left-hand column will be interpreted as the corresponding key + in the right-hand column. + + If you say Y here, and use an external keyboard, then each key in the + right-hand column will be interpreted as the key shown in the + left-hand column. + +config KEYBOARD_SUNKBD + tristate "Sun Type 4 and Type 5 keyboard" + select SERIO + help + Say Y here if you want to use a Sun Type 4 or Type 5 keyboard, + connected either to the Sun keyboard connector or to an serial + (RS-232) port via a simple adapter. + + To compile this driver as a module, choose M here: the + module will be called sunkbd. + +config KEYBOARD_LKKBD + tristate "DECstation/VAXstation LK201/LK401 keyboard" + select SERIO + help + Say Y here if you want to use a LK201 or LK401 style serial + keyboard. This keyboard is also useable on PCs if you attach + it with the inputattach program. The connector pinout is + described within lkkbd.c. + + To compile this driver as a module, choose M here: the + module will be called lkkbd. + +config KEYBOARD_LOCOMO + tristate "LoCoMo Keyboard Support" + depends on SHARP_LOCOMO + help + Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA + + To compile this driver as a module, choose M here: the + module will be called locomokbd. + +config KEYBOARD_XTKBD + tristate "XT keyboard" + select SERIO + help + Say Y here if you want to use the old IBM PC/XT keyboard (or + compatible) on your system. This is only possible with a + parallel port keyboard adapter, you cannot connect it to the + keyboard port on a PC that runs Linux. + + To compile this driver as a module, choose M here: the + module will be called xtkbd. + +config KEYBOARD_NEWTON + tristate "Newton keyboard" + select SERIO + help + Say Y here if you have a Newton keyboard on a serial port. + + To compile this driver as a module, choose M here: the + module will be called newtonkbd. + +config KEYBOARD_CORGI + tristate "Corgi keyboard" + depends on PXA_SHARPSL + default y + help + Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx + series of PDAs. + + To compile this driver as a module, choose M here: the + module will be called corgikbd. + +config KEYBOARD_MAPLE + tristate "Maple bus keyboard" + depends on SH_DREAMCAST && MAPLE + help + Say Y here if you have a DreamCast console running Linux and have + a keyboard attached to its Maple bus. + + To compile this driver as a module, choose M here: the + module will be called maple_keyb. + +config KEYBOARD_AMIGA + tristate "Amiga keyboard" + depends on AMIGA + help + Say Y here if you are running Linux on any AMIGA and have a keyboard + attached. + + To compile this driver as a module, choose M here: the + module will be called amikbd. + +config KEYBOARD_HIL_OLD + tristate "HP HIL keyboard support (simple driver)" + depends on GSC + default y + help + The "Human Interface Loop" is a older, 8-channel USB-like + controller used in several Hewlett Packard models. This driver + was adapted from the one written for m68k/hp300, and implements + support for a keyboard attached to the HIL port, but not for + any other types of HIL input devices like mice or tablets. + However, it has been thoroughly tested and is stable. + + If you want full HIL support including support for multiple + keyboards, mices and tablets, you have to enable the + "HP System Device Controller i8042 Support" in the input/serio + submenu. + +config KEYBOARD_HIL + tristate "HP HIL keyboard support" + depends on GSC + default y + select HP_SDC + select HIL_MLC + select SERIO + help + The "Human Interface Loop" is a older, 8-channel USB-like + controller used in several Hewlett Packard models. + This driver implements support for HIL-keyboards attached + to your machine, so normally you should say Y here. + +endif |