diff options
Diffstat (limited to 'drivers/input/mouse')
-rw-r--r-- | drivers/input/mouse/appletouch.c | 111 |
1 files changed, 74 insertions, 37 deletions
diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c index e3215267db1..2bea1b2c631 100644 --- a/drivers/input/mouse/appletouch.c +++ b/drivers/input/mouse/appletouch.c @@ -155,6 +155,8 @@ struct atp { int xy_acc[ATP_XSENSORS + ATP_YSENSORS]; int overflowwarn; /* overflow warning printed? */ int datalen; /* size of an USB urb transfer */ + int idlecount; /* number of empty packets */ + struct work_struct work; }; #define dbg_dump(msg, tab) \ @@ -208,6 +210,55 @@ static inline int atp_is_geyser_3(struct atp *dev) (productId == GEYSER4_JIS_PRODUCT_ID); } +/* + * By default Geyser 3 device sends standard USB HID mouse + * packets (Report ID 2). This code changes device mode, so it + * sends raw sensor reports (Report ID 5). + */ +static int atp_geyser3_init(struct usb_device *udev) +{ + char data[8]; + int size; + + size = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + ATP_GEYSER3_MODE_READ_REQUEST_ID, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + ATP_GEYSER3_MODE_REQUEST_VALUE, + ATP_GEYSER3_MODE_REQUEST_INDEX, &data, 8, 5000); + + if (size != 8) { + err("Could not do mode read request from device" + " (Geyser 3 mode)"); + return -EIO; + } + + /* Apply the mode switch */ + data[0] = ATP_GEYSER3_MODE_VENDOR_VALUE; + + size = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + ATP_GEYSER3_MODE_WRITE_REQUEST_ID, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + ATP_GEYSER3_MODE_REQUEST_VALUE, + ATP_GEYSER3_MODE_REQUEST_INDEX, &data, 8, 5000); + + if (size != 8) { + err("Could not do mode write request to device" + " (Geyser 3 mode)"); + return -EIO; + } + return 0; +} + +/* Reinitialise the device if it's a geyser 3 */ +static void atp_reinit(struct work_struct *work) +{ + struct atp *dev = container_of(work, struct atp, work); + struct usb_device *udev = dev->udev; + + dev->idlecount = 0; + atp_geyser3_init(udev); +} + static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact, int *z, int *fingers) { @@ -439,8 +490,8 @@ static void atp_complete(struct urb* urb) } dev->x_old = x; dev->y_old = y; - } - else if (!x && !y) { + + } else if (!x && !y) { dev->x_old = dev->y_old = -1; input_report_key(dev->input, BTN_TOUCH, 0); @@ -449,11 +500,21 @@ static void atp_complete(struct urb* urb) /* reset the accumulator on release */ memset(dev->xy_acc, 0, sizeof(dev->xy_acc)); - } - input_report_key(dev->input, BTN_LEFT, - !!dev->data[dev->datalen - 1]); + /* Geyser 3 will continue to send packets continually after + the first touch unless reinitialised. Do so if it's been + idle for a while in order to avoid waking the kernel up + several hundred times a second */ + if (atp_is_geyser_3(dev)) { + dev->idlecount++; + if (dev->idlecount == 10) { + dev->valid = 0; + schedule_work(&dev->work); + } + } + } + input_report_key(dev->input, BTN_LEFT, dev->data[dev->datalen - 1] & 1); input_sync(dev->input); exit: @@ -480,6 +541,7 @@ static void atp_close(struct input_dev *input) struct atp *dev = input_get_drvdata(input); usb_kill_urb(dev->urb); + cancel_work_sync(&dev->work); dev->open = 0; } @@ -528,40 +590,10 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id dev->datalen = 81; if (atp_is_geyser_3(dev)) { - /* - * By default Geyser 3 device sends standard USB HID mouse - * packets (Report ID 2). This code changes device mode, so it - * sends raw sensor reports (Report ID 5). - */ - char data[8]; - int size; - - size = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), - ATP_GEYSER3_MODE_READ_REQUEST_ID, - USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - ATP_GEYSER3_MODE_REQUEST_VALUE, - ATP_GEYSER3_MODE_REQUEST_INDEX, &data, 8, 5000); - - if (size != 8) { - err("Could not do mode read request from device" - " (Geyser 3 mode)"); + /* switch to raw sensor mode */ + if (atp_geyser3_init(udev)) goto err_free_devs; - } - - /* Apply the mode switch */ - data[0] = ATP_GEYSER3_MODE_VENDOR_VALUE; - - size = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - ATP_GEYSER3_MODE_WRITE_REQUEST_ID, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - ATP_GEYSER3_MODE_REQUEST_VALUE, - ATP_GEYSER3_MODE_REQUEST_INDEX, &data, 8, 5000); - if (size != 8) { - err("Could not do mode write request to device" - " (Geyser 3 mode)"); - goto err_free_devs; - } printk("appletouch Geyser 3 inited.\n"); } @@ -636,6 +668,8 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id /* save our data pointer in this interface device */ usb_set_intfdata(iface, dev); + INIT_WORK(&dev->work, atp_reinit); + return 0; err_free_buffer: @@ -669,14 +703,17 @@ static void atp_disconnect(struct usb_interface *iface) static int atp_suspend(struct usb_interface *iface, pm_message_t message) { struct atp *dev = usb_get_intfdata(iface); + usb_kill_urb(dev->urb); dev->valid = 0; + return 0; } static int atp_resume(struct usb_interface *iface) { struct atp *dev = usb_get_intfdata(iface); + if (dev->open && usb_submit_urb(dev->urb, GFP_ATOMIC)) return -EIO; |