aboutsummaryrefslogtreecommitdiff
path: root/drivers/input
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/input')
-rw-r--r--drivers/input/keyboard/hilkbd.c140
1 files changed, 80 insertions, 60 deletions
diff --git a/drivers/input/keyboard/hilkbd.c b/drivers/input/keyboard/hilkbd.c
index aacf71f3cd4..e9d639ec283 100644
--- a/drivers/input/keyboard/hilkbd.c
+++ b/drivers/input/keyboard/hilkbd.c
@@ -198,45 +198,28 @@ static void hil_do(unsigned char cmd, unsigned char *data, unsigned int len)
}
-/* initialise HIL */
-static int __init
-hil_keyb_init(void)
+/* initialize HIL */
+static int __devinit hil_keyb_init(void)
{
unsigned char c;
unsigned int i, kbid;
wait_queue_head_t hil_wait;
int err;
- if (hil_dev.dev) {
+ if (hil_dev.dev)
return -ENODEV; /* already initialized */
- }
+ init_waitqueue_head(&hil_wait);
spin_lock_init(&hil_dev.lock);
+
hil_dev.dev = input_allocate_device();
if (!hil_dev.dev)
return -ENOMEM;
-#if defined(CONFIG_HP300)
- if (!MACH_IS_HP300) {
- err = -ENODEV;
- goto err1;
- }
- if (!hwreg_present((void *)(HILBASE + HIL_DATA))) {
- printk(KERN_ERR "HIL: hardware register was not found\n");
- err = -ENODEV;
- goto err1;
- }
- if (!request_region(HILBASE + HIL_DATA, 2, "hil")) {
- printk(KERN_ERR "HIL: IOPORT region already used\n");
- err = -EIO;
- goto err1;
- }
-#endif
-
err = request_irq(HIL_IRQ, hil_interrupt, 0, "hil", hil_dev.dev_id);
if (err) {
printk(KERN_ERR "HIL: Can't get IRQ\n");
- goto err2;
+ goto err1;
}
/* Turn on interrupts */
@@ -246,11 +229,9 @@ hil_keyb_init(void)
hil_dev.valid = 0; /* clear any pending data */
hil_do(HIL_READKBDSADR, NULL, 0);
- init_waitqueue_head(&hil_wait);
- wait_event_interruptible_timeout(hil_wait, hil_dev.valid, 3*HZ);
- if (!hil_dev.valid) {
+ wait_event_interruptible_timeout(hil_wait, hil_dev.valid, 3 * HZ);
+ if (!hil_dev.valid)
printk(KERN_WARNING "HIL: timed out, assuming no keyboard present\n");
- }
c = hil_dev.c;
hil_dev.valid = 0;
@@ -268,7 +249,7 @@ hil_keyb_init(void)
for (i = 0; i < HIL_KEYCODES_SET1_TBLSIZE; i++)
if (hphilkeyb_keycode[i] != KEY_RESERVED)
- set_bit(hphilkeyb_keycode[i], hil_dev.dev->keybit);
+ __set_bit(hphilkeyb_keycode[i], hil_dev.dev->keybit);
hil_dev.dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
hil_dev.dev->ledbit[0] = BIT_MASK(LED_NUML) | BIT_MASK(LED_CAPSL) |
@@ -287,34 +268,45 @@ hil_keyb_init(void)
err = input_register_device(hil_dev.dev);
if (err) {
printk(KERN_ERR "HIL: Can't register device\n");
- goto err3;
+ goto err2;
}
+
printk(KERN_INFO "input: %s, ID %d at 0x%08lx (irq %d) found and attached\n",
hil_dev.dev->name, kbid, HILBASE, HIL_IRQ);
return 0;
-err3:
+err2:
hil_do(HIL_INTOFF, NULL, 0);
- disable_irq(HIL_IRQ);
free_irq(HIL_IRQ, hil_dev.dev_id);
-err2:
-#if defined(CONFIG_HP300)
- release_region(HILBASE + HIL_DATA, 2);
err1:
-#endif
input_free_device(hil_dev.dev);
hil_dev.dev = NULL;
return err;
}
+static void __devexit hil_keyb_exit(void)
+{
+ if (HIL_IRQ)
+ free_irq(HIL_IRQ, hil_dev.dev_id);
+
+ /* Turn off interrupts */
+ hil_do(HIL_INTOFF, NULL, 0);
+
+ input_unregister_device(hil_dev.dev);
+ hil_dev.dev = NULL;
+}
#if defined(CONFIG_PARISC)
-static int __init
-hil_init_chip(struct parisc_device *dev)
+static int __devinit hil_probe_chip(struct parisc_device *dev)
{
+ /* Only allow one HIL keyboard */
+ if (hil_dev.dev)
+ return -ENODEV;
+
if (!dev->irq) {
- printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%08lx\n", dev->hpa.start);
+ printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%p\n",
+ (void *)dev->hpa.start);
return -ENODEV;
}
@@ -327,51 +319,79 @@ hil_init_chip(struct parisc_device *dev)
return hil_keyb_init();
}
+static int __devexit hil_remove_chip(struct parisc_device *dev)
+{
+ hil_keyb_exit();
+
+ return 0;
+}
+
static struct parisc_device_id hil_tbl[] = {
{ HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00073 },
{ 0, }
};
+#if 0
+/* Disabled to avoid conflicts with the HP SDC HIL drivers */
MODULE_DEVICE_TABLE(parisc, hil_tbl);
+#endif
static struct parisc_driver hil_driver = {
- .name = "hil",
- .id_table = hil_tbl,
- .probe = hil_init_chip,
+ .name = "hil",
+ .id_table = hil_tbl,
+ .probe = hil_probe_chip,
+ .remove = __devexit_p(hil_remove_chip),
};
-#endif /* CONFIG_PARISC */
-
static int __init hil_init(void)
{
-#if defined(CONFIG_PARISC)
return register_parisc_driver(&hil_driver);
-#else
- return hil_keyb_init();
-#endif
}
-
static void __exit hil_exit(void)
{
- if (HIL_IRQ) {
- disable_irq(HIL_IRQ);
- free_irq(HIL_IRQ, hil_dev.dev_id);
+ unregister_parisc_driver(&hil_driver);
+}
+
+#else /* !CONFIG_PARISC */
+
+static int __init hil_init(void)
+{
+ int error;
+
+ /* Only allow one HIL keyboard */
+ if (hil_dev.dev)
+ return -EBUSY;
+
+ if (!MACH_IS_HP300)
+ return -ENODEV;
+
+ if (!hwreg_present((void *)(HILBASE + HIL_DATA))) {
+ printk(KERN_ERR "HIL: hardware register was not found\n");
+ return -ENODEV;
}
- /* Turn off interrupts */
- hil_do(HIL_INTOFF, NULL, 0);
+ if (!request_region(HILBASE + HIL_DATA, 2, "hil")) {
+ printk(KERN_ERR "HIL: IOPORT region already used\n");
+ return -EIO;
+ }
- input_unregister_device(hil_dev.dev);
+ error = hil_keyb_init();
+ if (error) {
+ release_region(HILBASE + HIL_DATA, 2);
+ return error;
+ }
- hil_dev.dev = NULL;
+ return 0;
+}
-#if defined(CONFIG_PARISC)
- unregister_parisc_driver(&hil_driver);
-#else
- release_region(HILBASE+HIL_DATA, 2);
-#endif
+static void __exit hil_exit(void)
+{
+ hil_keyb_exit();
+ release_region(HILBASE + HIL_DATA, 2);
}
+#endif /* CONFIG_PARISC */
+
module_init(hil_init);
module_exit(hil_exit);