diff options
Diffstat (limited to 'drivers/input')
28 files changed, 4094 insertions, 93 deletions
diff --git a/drivers/input/input.c b/drivers/input/input.c index 851791d955f..e828aab7dac 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -11,6 +11,7 @@ */ #include <linux/init.h> +#include <linux/types.h> #include <linux/input.h> #include <linux/module.h> #include <linux/random.h> @@ -514,7 +515,7 @@ static void input_disconnect_device(struct input_dev *dev) * that there are no threads in the middle of input_open_device() */ mutex_lock(&dev->mutex); - dev->going_away = 1; + dev->going_away = true; mutex_unlock(&dev->mutex); spin_lock_irq(&dev->event_lock); @@ -1259,20 +1260,81 @@ static int input_dev_uevent(struct device *device, struct kobj_uevent_env *env) return 0; } +#define INPUT_DO_TOGGLE(dev, type, bits, on) \ + do { \ + int i; \ + if (!test_bit(EV_##type, dev->evbit)) \ + break; \ + for (i = 0; i < type##_MAX; i++) { \ + if (!test_bit(i, dev->bits##bit) || \ + !test_bit(i, dev->bits)) \ + continue; \ + dev->event(dev, EV_##type, i, on); \ + } \ + } while (0) + +static void input_dev_reset(struct input_dev *dev, bool activate) +{ + if (!dev->event) + return; + + INPUT_DO_TOGGLE(dev, LED, led, activate); + INPUT_DO_TOGGLE(dev, SND, snd, activate); + + if (activate && test_bit(EV_REP, dev->evbit)) { + dev->event(dev, EV_REP, REP_PERIOD, dev->rep[REP_PERIOD]); + dev->event(dev, EV_REP, REP_DELAY, dev->rep[REP_DELAY]); + } +} + +#ifdef CONFIG_PM +static int input_dev_suspend(struct device *dev) +{ + struct input_dev *input_dev = to_input_dev(dev); + + mutex_lock(&input_dev->mutex); + input_dev_reset(input_dev, false); + mutex_unlock(&input_dev->mutex); + + return 0; +} + +static int input_dev_resume(struct device *dev) +{ + struct input_dev *input_dev = to_input_dev(dev); + + mutex_lock(&input_dev->mutex); + input_dev_reset(input_dev, true); + mutex_unlock(&input_dev->mutex); + + return 0; +} + +static const struct dev_pm_ops input_dev_pm_ops = { + .suspend = input_dev_suspend, + .resume = input_dev_resume, + .poweroff = input_dev_suspend, + .restore = input_dev_resume, +}; +#endif /* CONFIG_PM */ + static struct device_type input_dev_type = { .groups = input_dev_attr_groups, .release = input_dev_release, .uevent = input_dev_uevent, +#ifdef CONFIG_PM + .pm = &input_dev_pm_ops, +#endif }; -static char *input_nodename(struct device *dev) +static char *input_devnode(struct device *dev, mode_t *mode) { return kasprintf(GFP_KERNEL, "input/%s", dev_name(dev)); } struct class input_class = { .name = "input", - .nodename = input_nodename, + .devnode = input_devnode, }; EXPORT_SYMBOL_GPL(input_class); diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 3525c19be42..ee98b1bc5d8 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -24,6 +24,16 @@ config KEYBOARD_AAED2000 To compile this driver as a module, choose M here: the module will be called aaed2000_kbd. +config KEYBOARD_ADP5588 + tristate "ADP5588 I2C QWERTY Keypad and IO Expander" + depends on I2C + help + Say Y here if you want to use a ADP5588 attached to your + system I2C bus. + + To compile this driver as a module, choose M here: the + module will be called adp5588-keys. + config KEYBOARD_AMIGA tristate "Amiga keyboard" depends on AMIGA @@ -104,6 +114,16 @@ config KEYBOARD_ATKBD_RDI_KEYCODES right-hand column will be interpreted as the key shown in the left-hand column. +config QT2160 + tristate "Atmel AT42QT2160 Touch Sensor Chip" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for Atmel AT42QT2160 Touch + Sensor chip as a keyboard input. + + This driver can also be built as a module. If so, the module + will be called qt2160. + config KEYBOARD_BFIN tristate "Blackfin BF54x keypad support" depends on (BF54x && !BF544) @@ -251,6 +271,17 @@ config KEYBOARD_MAPLE To compile this driver as a module, choose M here: the module will be called maple_keyb. +config KEYBOARD_MAX7359 + tristate "Maxim MAX7359 Key Switch Controller" + depends on I2C + help + If you say yes here you get support for the Maxim MAX7359 Key + Switch Controller chip. This providers microprocessors with + management of up to 64 key switches + + To compile this driver as a module, choose M here: the + module will be called max7359_keypad. + config KEYBOARD_NEWTON tristate "Newton keyboard" select SERIO @@ -260,6 +291,15 @@ config KEYBOARD_NEWTON To compile this driver as a module, choose M here: the module will be called newtonkbd. +config KEYBOARD_OPENCORES + tristate "OpenCores Keyboard Controller" + help + Say Y here if you want to use the OpenCores Keyboard Controller + http://www.opencores.org/project,keyboardcontroller + + To compile this driver as a module, choose M here; the + module will be called opencores-kbd. + config KEYBOARD_PXA27x tristate "PXA27x/PXA3xx keypad support" depends on PXA27x || PXA3xx diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 8a7a22b3026..babad5e58b7 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -5,6 +5,7 @@ # Each configuration option enables a list of files. obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o +obj-$(CONFIG_KEYBOARD_ADP5588) += adp5588-keys.o obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o @@ -21,10 +22,13 @@ obj-$(CONFIG_KEYBOARD_LM8323) += lm8323.o obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o +obj-$(CONFIG_KEYBOARD_MAX7359) += max7359_keypad.o obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o +obj-$(CONFIG_KEYBOARD_OPENCORES) += opencores-kbd.o obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o +obj-$(CONFIG_KEYBOARD_QT2160) += qt2160.o obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c new file mode 100644 index 00000000000..d48c808d592 --- /dev/null +++ b/drivers/input/keyboard/adp5588-keys.c @@ -0,0 +1,361 @@ +/* + * File: drivers/input/keyboard/adp5588_keys.c + * Description: keypad driver for ADP5588 I2C QWERTY Keypad and IO Expander + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * Copyright (C) 2008-2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +#include <linux/module.h> +#include <linux/version.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/workqueue.h> +#include <linux/errno.h> +#include <linux/pm.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/i2c.h> + +#include <linux/i2c/adp5588.h> + + /* Configuration Register1 */ +#define AUTO_INC (1 << 7) +#define GPIEM_CFG (1 << 6) +#define OVR_FLOW_M (1 << 5) +#define INT_CFG (1 << 4) +#define OVR_FLOW_IEN (1 << 3) +#define K_LCK_IM (1 << 2) +#define GPI_IEN (1 << 1) +#define KE_IEN (1 << 0) + +/* Interrupt Status Register */ +#define CMP2_INT (1 << 5) +#define CMP1_INT (1 << 4) +#define OVR_FLOW_INT (1 << 3) +#define K_LCK_INT (1 << 2) +#define GPI_INT (1 << 1) +#define KE_INT (1 << 0) + +/* Key Lock and Event Counter Register */ +#define K_LCK_EN (1 << 6) +#define LCK21 0x30 +#define KEC 0xF + +/* Key Event Register xy */ +#define KEY_EV_PRESSED (1 << 7) +#define KEY_EV_MASK (0x7F) + +#define KP_SEL(x) (0xFFFF >> (16 - x)) /* 2^x-1 */ + +#define KEYP_MAX_EVENT 10 + +/* + * Early pre 4.0 Silicon required to delay readout by at least 25ms, + * since the Event Counter Register updated 25ms after the interrupt + * asserted. + */ +#define WA_DELAYED_READOUT_REVID(rev) ((rev) < 4) + +struct adp5588_kpad { + struct i2c_client *client; + struct input_dev *input; + struct delayed_work work; + unsigned long delay; + unsigned short keycode[ADP5588_KEYMAPSIZE]; +}; + +static int adp5588_read(struct i2c_client *client, u8 reg) +{ + int ret = i2c_smbus_read_byte_data(client, reg); + + if (ret < 0) + dev_err(&client->dev, "Read Error\n"); + + return ret; +} + +static int adp5588_write(struct i2c_client *client, u8 reg, u8 val) +{ + return i2c_smbus_write_byte_data(client, reg, val); +} + +static void adp5588_work(struct work_struct *work) +{ + struct adp5588_kpad *kpad = container_of(work, + struct adp5588_kpad, work.work); + struct i2c_client *client = kpad->client; + int i, key, status, ev_cnt; + + status = adp5588_read(client, INT_STAT); + + if (status & OVR_FLOW_INT) /* Unlikely and should never happen */ + dev_err(&client->dev, "Event Overflow Error\n"); + + if (status & KE_INT) { + ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & KEC; + if (ev_cnt) { + for (i = 0; i < ev_cnt; i++) { + key = adp5588_read(client, Key_EVENTA + i); + input_report_key(kpad->input, + kpad->keycode[(key & KEY_EV_MASK) - 1], + key & KEY_EV_PRESSED); + } + input_sync(kpad->input); + } + } + adp5588_write(client, INT_STAT, status); /* Status is W1C */ +} + +static irqreturn_t adp5588_irq(int irq, void *handle) +{ + struct adp5588_kpad *kpad = handle; + + /* + * use keventd context to read the event fifo registers + * Schedule readout at least 25ms after notification for + * REVID < 4 + */ + + schedule_delayed_work(&kpad->work, kpad->delay); + + return IRQ_HANDLED; +} + +static int __devinit adp5588_setup(struct i2c_client *client) +{ + struct adp5588_kpad_platform_data *pdata = client->dev.platform_data; + int i, ret; + + ret = adp5588_write(client, KP_GPIO1, KP_SEL(pdata->rows)); + ret |= adp5588_write(client, KP_GPIO2, KP_SEL(pdata->cols) & 0xFF); + ret |= adp5588_write(client, KP_GPIO3, KP_SEL(pdata->cols) >> 8); + + if (pdata->en_keylock) { + ret |= adp5588_write(client, UNLOCK1, pdata->unlock_key1); + ret |= adp5588_write(client, UNLOCK2, pdata->unlock_key2); + ret |= adp5588_write(client, KEY_LCK_EC_STAT, K_LCK_EN); + } + + for (i = 0; i < KEYP_MAX_EVENT; i++) + ret |= adp5588_read(client, Key_EVENTA); + + ret |= adp5588_write(client, INT_STAT, CMP2_INT | CMP1_INT | + OVR_FLOW_INT | K_LCK_INT | + GPI_INT | KE_INT); /* Status is W1C */ + + ret |= adp5588_write(client, CFG, INT_CFG | OVR_FLOW_IEN | KE_IEN); + + if (ret < 0) { + dev_err(&client->dev, "Write Error\n"); + return ret; + } + + return 0; +} + +static int __devinit adp5588_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adp5588_kpad *kpad; + struct adp5588_kpad_platform_data *pdata = client->dev.platform_data; + struct input_dev *input; + unsigned int revid; + int ret, i; + int error; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_err(&client->dev, "SMBUS Byte Data not Supported\n"); + return -EIO; + } + + if (!pdata) { + dev_err(&client->dev, "no platform data?\n"); + return -EINVAL; + } + + if (!pdata->rows || !pdata->cols || !pdata->keymap) { + dev_err(&client->dev, "no rows, cols or keymap from pdata\n"); + return -EINVAL; + } + + if (pdata->keymapsize != ADP5588_KEYMAPSIZE) { + dev_err(&client->dev, "invalid keymapsize\n"); + return -EINVAL; + } + + if (!client->irq) { + dev_err(&client->dev, "no IRQ?\n"); + return -EINVAL; + } + + kpad = kzalloc(sizeof(*kpad), GFP_KERNEL); + input = input_allocate_device(); + if (!kpad || !input) { + error = -ENOMEM; + goto err_free_mem; + } + + kpad->client = client; + kpad->input = input; + INIT_DELAYED_WORK(&kpad->work, adp5588_work); + + ret = adp5588_read(client, DEV_ID); + if (ret < 0) { + error = ret; + goto err_free_mem; + } + + revid = (u8) ret & ADP5588_DEVICE_ID_MASK; + if (WA_DELAYED_READOUT_REVID(revid)) + kpad->delay = msecs_to_jiffies(30); + + input->name = client->name; + input->phys = "adp5588-keys/input0"; + input->dev.parent = &client->dev; + + input_set_drvdata(input, kpad); + + input->id.bustype = BUS_I2C; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = revid; + + input->keycodesize = sizeof(kpad->keycode[0]); + input->keycodemax = pdata->keymapsize; + input->keycode = kpad->keycode; + + memcpy(kpad->keycode, pdata->keymap, + pdata->keymapsize * input->keycodesize); + + /* setup input device */ + __set_bit(EV_KEY, input->evbit); + + if (pdata->repeat) + __set_bit(EV_REP, input->evbit); + + for (i = 0; i < input->keycodemax; i++) + __set_bit(kpad->keycode[i] & KEY_MAX, input->keybit); + __clear_bit(KEY_RESERVED, input->keybit); + + error = input_register_device(input); + if (error) { + dev_err(&client->dev, "unable to register input device\n"); + goto err_free_mem; + } + + error = request_irq(client->irq, adp5588_irq, + IRQF_TRIGGER_FALLING | IRQF_DISABLED, + client->dev.driver->name, kpad); + if (error) { + dev_err(&client->dev, "irq %d busy?\n", client->irq); + goto err_unreg_dev; + } + + error = adp5588_setup(client); + if (error) + goto err_free_irq; + + device_init_wakeup(&client->dev, 1); + i2c_set_clientdata(client, kpad); + + dev_info(&client->dev, "Rev.%d keypad, irq %d\n", revid, client->irq); + return 0; + + err_free_irq: + free_irq(client->irq, kpad); + err_unreg_dev: + input_unregister_device(input); + input = NULL; + err_free_mem: + input_free_device(input); + kfree(kpad); + + return error; +} + +static int __devexit adp5588_remove(struct i2c_client *client) +{ + struct adp5588_kpad *kpad = i2c_get_clientdata(client); + + adp5588_write(client, CFG, 0); + free_irq(client->irq, kpad); + cancel_delayed_work_sync(&kpad->work); + input_unregister_device(kpad->input); + i2c_set_clientdata(client, NULL); + kfree(kpad); + + return 0; +} + +#ifdef CONFIG_PM +static int adp5588_suspend(struct device *dev) +{ + struct adp5588_kpad *kpad = dev_get_drvdata(dev); + struct i2c_client *client = kpad->client; + + disable_irq(client->irq); + cancel_delayed_work_sync(&kpad->work); + + if (device_may_wakeup(&client->dev)) + enable_irq_wake(client->irq); + + return 0; +} + +static int adp5588_resume(struct device *dev) +{ + struct adp5588_kpad *kpad = dev_get_drvdata(dev); + struct i2c_client *client = kpad->client; + + if (device_may_wakeup(&client->dev)) + disable_irq_wake(client->irq); + + enable_irq(client->irq); + + return 0; +} + +static struct dev_pm_ops adp5588_dev_pm_ops = { + .suspend = adp5588_suspend, + .resume = adp5588_resume, +}; +#endif + +static const struct i2c_device_id adp5588_id[] = { + { KBUILD_MODNAME, 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adp5588_id); + +static struct i2c_driver adp5588_driver = { + .driver = { + .name = KBUILD_MODNAME, +#ifdef CONFIG_PM + .pm = &adp5588_dev_pm_ops, +#endif + }, + .probe = adp5588_probe, + .remove = __devexit_p(adp5588_remove), + .id_table = adp5588_id, +}; + +static int __init adp5588_init(void) +{ + return i2c_add_driver(&adp5588_driver); +} +module_init(adp5588_init); + +static void __exit adp5588_exit(void) +{ + i2c_del_driver(&adp5588_driver); +} +module_exit(adp5588_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); +MODULE_DESCRIPTION("ADP5588 Keypad driver"); +MODULE_ALIAS("platform:adp5588-keys"); diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index c9523e48c6a..4709e15af60 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -229,7 +229,7 @@ struct atkbd { }; /* - * System-specific ketymap fixup routine + * System-specific keymap fixup routine */ static void (*atkbd_platform_fixup)(struct atkbd *, const void *data); static void *atkbd_platform_fixup_data; @@ -773,23 +773,6 @@ static int atkbd_select_set(struct atkbd *atkbd, int target_set, int allow_extra static int atkbd_activate(struct atkbd *atkbd) { struct ps2dev *ps2dev = &atkbd->ps2dev; - unsigned char param[1]; - -/* - * Set the LEDs to a defined state. - */ - - param[0] = 0; - if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS)) - return -1; - -/* - * Set autorepeat to fastest possible. - */ - - param[0] = 0; - if (ps2_command(ps2dev, param, ATKBD_CMD_SETREP)) - return -1; /* * Enable the keyboard to receive keystrokes. @@ -1158,14 +1141,6 @@ static int atkbd_reconnect(struct serio *serio) return -1; atkbd_activate(atkbd); - -/* - * Restore repeat rate and LEDs (that were reset by atkbd_activate) - * to pre-resume state - */ - if (!atkbd->softrepeat) - atkbd_set_repeat_rate(atkbd); - atkbd_set_leds(atkbd); } atkbd_enable(atkbd); diff --git a/drivers/input/keyboard/max7359_keypad.c b/drivers/input/keyboard/max7359_keypad.c new file mode 100644 index 00000000000..3b5b948eba3 --- /dev/null +++ b/drivers/input/keyboard/max7359_keypad.c @@ -0,0 +1,330 @@ +/* + * max7359_keypad.c - MAX7359 Key Switch Controller Driver + * + * Copyright (C) 2009 Samsung Electronics + * Kim Kyuwon <q1.kim@samsung.com> + * + * Based on pxa27x_keypad.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Datasheet: http://www.maxim-ic.com/quick_view2.cfm/qv_pk/5456 + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/input/matrix_keypad.h> + +#define MAX7359_MAX_KEY_ROWS 8 +#define MAX7359_MAX_KEY_COLS 8 +#define MAX7359_MAX_KEY_NUM (MAX7359_MAX_KEY_ROWS * MAX7359_MAX_KEY_COLS) +#define MAX7359_ROW_SHIFT 3 + +/* + * MAX7359 registers + */ +#define MAX7359_REG_KEYFIFO 0x00 +#define MAX7359_REG_CONFIG 0x01 +#define MAX7359_REG_DEBOUNCE 0x02 +#define MAX7359_REG_INTERRUPT 0x03 +#define MAX7359_REG_PORTS 0x04 +#define MAX7359_REG_KEYREP 0x05 +#define MAX7359_REG_SLEEP 0x06 + +/* + * Configuration register bits + */ +#define MAX7359_CFG_SLEEP (1 << 7) +#define MAX7359_CFG_INTERRUPT (1 << 5) +#define MAX7359_CFG_KEY_RELEASE (1 << 3) +#define MAX7359_CFG_WAKEUP (1 << 1) +#define MAX7359_CFG_TIMEOUT (1 << 0) + +/* + * Autosleep register values (ms) + */ +#define MAX7359_AUTOSLEEP_8192 0x01 +#define MAX7359_AUTOSLEEP_4096 0x02 +#define MAX7359_AUTOSLEEP_2048 0x03 +#define MAX7359_AUTOSLEEP_1024 0x04 +#define MAX7359_AUTOSLEEP_512 0x05 +#define MAX7359_AUTOSLEEP_256 0x06 + +struct max7359_keypad { + /* matrix key code map */ + unsigned short keycodes[MAX7359_MAX_KEY_NUM]; + + struct input_dev *input_dev; + struct i2c_client *client; +}; + +static int max7359_write_reg(struct i2c_client *client, u8 reg, u8 val) +{ + int ret = i2c_smbus_write_byte_data(client, reg, val); + + if (ret < 0) + dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n", + __func__, reg, val, ret); + return ret; +} + +static int max7359_read_reg(struct i2c_client *client, int reg) +{ + int ret = i2c_smbus_read_byte_data(client, reg); + + if (ret < 0) + dev_err(&client->dev, "%s: reg 0x%x, err %d\n", + __func__, reg, ret); + return ret; +} + +static void max7359_build_keycode(struct max7359_keypad *keypad, + const struct matrix_keymap_data *keymap_data) +{ + struct input_dev *input_dev = keypad->input_dev; + int i; + + for (i = 0; i < keymap_data->keymap_size; i++) { + unsigned int key = keymap_data->keymap[i]; + unsigned int row = KEY_ROW(key); + unsigned int col = KEY_COL(key); + unsigned int scancode = MATRIX_SCAN_CODE(row, col, + MAX7359_ROW_SHIFT); + unsigned short keycode = KEY_VAL(key); + + keypad->keycodes[scancode] = keycode; + __set_bit(keycode, input_dev->keybit); + } + __clear_bit(KEY_RESERVED, input_dev->keybit); +} + +/* runs in an IRQ thread -- can (and will!) sleep */ +static irqreturn_t max7359_interrupt(int irq, void *dev_id) +{ + struct max7359_keypad *keypad = dev_id; + struct input_dev *input_dev = keypad->input_dev; + int val, row, col, release, code; + + val = max7359_read_reg(keypad->client, MAX7359_REG_KEYFIFO); + row = val & 0x7; + col = (val >> 3) & 0x7; + release = val & 0x40; + + code = MATRIX_SCAN_CODE(row, col, MAX7359_ROW_SHIFT); + + dev_dbg(&keypad->client->dev, + "key[%d:%d] %s\n", row, col, release ? "release" : "press"); + + input_event(input_dev, EV_MSC, MSC_SCAN, code); + input_report_key(input_dev, keypad->keycodes[code], !release); + input_sync(input_dev); + + return IRQ_HANDLED; +} + +/* + * Let MAX7359 fall into a deep sleep: + * If no keys are pressed, enter sleep mode for 8192 ms. And if any + * key is pressed, the MAX7359 returns to normal operating mode. + */ +static inline void max7359_fall_deepsleep(struct i2c_client *client) +{ + max7359_write_reg(client, MAX7359_REG_SLEEP, MAX7359_AUTOSLEEP_8192); +} + +/* + * Let MAX7359 take a catnap: + * Autosleep just for 256 ms. + */ +static inline void max7359_take_catnap(struct i2c_client *client) +{ + max7359_write_reg(client, MAX7359_REG_SLEEP, MAX7359_AUTOSLEEP_256); +} + +static int max7359_open(struct input_dev *dev) +{ + struct max7359_keypad *keypad = input_get_drvdata(dev); + + max7359_take_catnap(keypad->client); + + return 0; +} + +static void max7359_close(struct input_dev *dev) +{ + struct max7359_keypad *keypad = input_get_drvdata(dev); + + max7359_fall_deepsleep(keypad->client); +} + +static void max7359_initialize(struct i2c_client *client) +{ + max7359_write_reg(client, MAX7359_REG_CONFIG, + MAX7359_CFG_INTERRUPT | /* Irq clears after host read */ + MAX7359_CFG_KEY_RELEASE | /* Key release enable */ + MAX7359_CFG_WAKEUP); /* Key press wakeup enable */ + + /* Full key-scan functionality */ + max7359_write_reg(client, MAX7359_REG_DEBOUNCE, 0x1F); + + /* nINT asserts every debounce cycles */ + max7359_write_reg(client, MAX7359_REG_INTERRUPT, 0x01); + + max7359_fall_deepsleep(client); +} + +static int __devinit max7359_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct matrix_keymap_data *keymap_data = client->dev.platform_data; + struct max7359_keypad *keypad; + struct input_dev *input_dev; + int ret; + int error; + + if (!client->irq) { + dev_err(&client->dev, "The irq number should not be zero\n"); + return -EINVAL; + } + + /* Detect MAX7359: The initial Keys FIFO value is '0x3F' */ + ret = max7359_read_reg(client, MAX7359_REG_KEYFIFO); + if (ret < 0) { + dev_err(&client->dev, "failed to detect device\n"); + return -ENODEV; + } + + dev_dbg(&client->dev, "keys FIFO is 0x%02x\n", ret); + + keypad = kzalloc(sizeof(struct max7359_keypad), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!keypad || !input_dev) { + dev_err(&client->dev, "failed to allocate memory\n"); + error = -ENOMEM; + goto failed_free_mem; + } + + keypad->client = client; + keypad->input_dev = input_dev; + + input_dev->name = client->name; + input_dev->id.bustype = BUS_I2C; + input_dev->open = max7359_open; + input_dev->close = max7359_close; + input_dev->dev.parent = &client->dev; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + input_dev->keycodesize = sizeof(keypad->keycodes[0]); + input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes); + input_dev->keycode = keypad->keycodes; + + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + input_set_drvdata(input_dev, keypad); + + max7359_build_keycode(keypad, keymap_data); + + error = request_threaded_irq(client->irq, NULL, max7359_interrupt, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + client->name, keypad); + if (error) { + dev_err(&client->dev, "failed to register interrupt\n"); + goto failed_free_mem; + } + + /* Register the input device */ + error = input_register_device(input_dev); + if (error) { + dev_err(&client->dev, "failed to register input device\n"); + goto failed_free_irq; + } + + /* Initialize MAX7359 */ + max7359_initialize(client); + + i2c_set_clientdata(client, keypad); + device_init_wakeup(&client->dev, 1); + + return 0; + +failed_free_irq: + free_irq(client->irq, keypad); +failed_free_mem: + input_free_device(input_dev); + kfree(keypad); + return error; +} + +static int __devexit max7359_remove(struct i2c_client *client) +{ + struct max7359_keypad *keypad = i2c_get_clientdata(client); + + free_irq(client->irq, keypad); + input_unregister_device(keypad->input_dev); + i2c_set_clientdata(client, NULL); + kfree(keypad); + + return 0; +} + +#ifdef CONFIG_PM +static int max7359_suspend(struct i2c_client *client, pm_message_t mesg) +{ + max7359_fall_deepsleep(client); + + if (device_may_wakeup(&client->dev)) + enable_irq_wake(client->irq); + + return 0; +} + +static int max7359_resume(struct i2c_client *client) +{ + if (device_may_wakeup(&client->dev)) + disable_irq_wake(client->irq); + + /* Restore the default setting */ + max7359_take_catnap(client); + + return 0; +} +#else +#define max7359_suspend NULL +#define max7359_resume NULL +#endif + +static const struct i2c_device_id max7359_ids[] = { + { "max7359", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, max7359_ids); + +static struct i2c_driver max7359_i2c_driver = { + .driver = { + .name = "max7359", + }, + .probe = max7359_probe, + .remove = __devexit_p(max7359_remove), + .suspend = max7359_suspend, + .resume = max7359_resume, + .id_table = max7359_ids, +}; + +static int __init max7359_init(void) +{ + return i2c_add_driver(&max7359_i2c_driver); +} +module_init(max7359_init); + +static void __exit max7359_exit(void) +{ + i2c_del_driver(&max7359_i2c_driver); +} +module_exit(max7359_exit); + +MODULE_AUTHOR("Kim Kyuwon <q1.kim@samsung.com>"); +MODULE_DESCRIPTION("MAX7359 Key Switch Controller Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c index 87ec7b18ac6..bba85add35a 100644 --- a/drivers/input/keyboard/omap-keypad.c +++ b/drivers/input/keyboard/omap-keypad.c @@ -116,7 +116,7 @@ static irqreturn_t omap_kp_interrupt(int irq, void *dev_id) } } else /* disable keyboard interrupt and schedule for handling */ - omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); + omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); tasklet_schedule(&kp_tasklet); @@ -143,20 +143,20 @@ static void omap_kp_scan_keypad(struct omap_kp *omap_kp, unsigned char *state) } else { /* disable keyboard interrupt and schedule for handling */ - omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); + omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); /* read the keypad status */ - omap_writew(0xff, OMAP_MPUIO_BASE + OMAP_MPUIO_KBC); + omap_writew(0xff, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC); for (col = 0; col < omap_kp->cols; col++) { omap_writew(~(1 << col) & 0xff, - OMAP_MPUIO_BASE + OMAP_MPUIO_KBC); + OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC); udelay(omap_kp->delay); - state[col] = ~omap_readw(OMAP_MPUIO_BASE + + state[col] = ~omap_readw(OMAP1_MPUIO_BASE + OMAP_MPUIO_KBR_LATCH) & 0xff; } - omap_writew(0x00, OMAP_MPUIO_BASE + OMAP_MPUIO_KBC); + omap_writew(0x00, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC); udelay(2); } } @@ -234,7 +234,7 @@ static void omap_kp_tasklet(unsigned long data) for (i = 0; i < omap_kp_data->rows; i++) enable_irq(gpio_to_irq(row_gpios[i])); } else { - omap_writew(0, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); + omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); kp_cur_group = -1; } } @@ -317,7 +317,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev) /* Disable the interrupt for the MPUIO keyboard */ if (!cpu_is_omap24xx()) - omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); + omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); keymap = pdata->keymap; @@ -391,7 +391,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev) } if (pdata->dbounce) - omap_writew(0xff, OMAP_MPUIO_BASE + OMAP_MPUIO_GPIO_DEBOUNCING); + omap_writew(0xff, OMAP1_MPUIO_BASE + OMAP_MPUIO_GPIO_DEBOUNCING); /* scan current status and enable interrupt */ omap_kp_scan_keypad(omap_kp, keypad_state); @@ -402,7 +402,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev) "omap-keypad", omap_kp) < 0) goto err4; } - omap_writew(0, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); + omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); } else { for (irq_idx = 0; irq_idx < omap_kp->rows; irq_idx++) { if (request_irq(gpio_to_irq(row_gpios[irq_idx]), @@ -449,7 +449,7 @@ static int __devexit omap_kp_remove(struct platform_device *pdev) free_irq(gpio_to_irq(row_gpios[i]), 0); } } else { - omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); + omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); free_irq(omap_kp->irq, 0); } diff --git a/drivers/input/keyboard/opencores-kbd.c b/drivers/input/keyboard/opencores-kbd.c new file mode 100644 index 00000000000..78cccddbf55 --- /dev/null +++ b/drivers/input/keyboard/opencores-kbd.c @@ -0,0 +1,180 @@ +/* + * OpenCores Keyboard Controller Driver + * http://www.opencores.org/project,keyboardcontroller + * + * Copyright 2007-2009 HV Sistemas S.L. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +struct opencores_kbd { + struct input_dev *input; + struct resource *addr_res; + void __iomem *addr; + int irq; + unsigned short keycodes[128]; +}; + +static irqreturn_t opencores_kbd_isr(int irq, void *dev_id) +{ + struct opencores_kbd *opencores_kbd = dev_id; + struct input_dev *input = opencores_kbd->input; + unsigned char c; + + c = readb(opencores_kbd->addr); + input_report_key(input, c & 0x7f, c & 0x80 ? 0 : 1); + input_sync(input); + + return IRQ_HANDLED; +} + +static int __devinit opencores_kbd_probe(struct platform_device *pdev) +{ + struct input_dev *input; + struct opencores_kbd *opencores_kbd; + struct resource *res; + int irq, i, error; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "missing board memory resource\n"); + return -EINVAL; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "missing board IRQ resource\n"); + return -EINVAL; + } + + opencores_kbd = kzalloc(sizeof(*opencores_kbd), GFP_KERNEL); + input = input_allocate_device(); + if (!opencores_kbd || !input) { + dev_err(&pdev->dev, "failed to allocate device structures\n"); + error = -ENOMEM; + goto err_free_mem; + } + + opencores_kbd->addr_res = res; + res = request_mem_region(res->start, resource_size(res), pdev->name); + if (!res) { + dev_err(&pdev->dev, "failed to request I/O memory\n"); + error = -EBUSY; + goto err_free_mem; + } + + opencores_kbd->addr = ioremap(res->start, resource_size(res)); + if (!opencores_kbd->addr) { + dev_err(&pdev->dev, "failed to remap I/O memory\n"); + error = -ENXIO; + goto err_rel_mem; + } + + opencores_kbd->input = input; + opencores_kbd->irq = irq; + + input->name = pdev->name; + input->phys = "opencores-kbd/input0"; + input->dev.parent = &pdev->dev; + + input_set_drvdata(input, opencores_kbd); + + input->id.bustype = BUS_HOST; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = 0x0100; + + input->keycode = opencores_kbd->keycodes; + input->keycodesize = sizeof(opencores_kbd->keycodes[0]); + input->keycodemax = ARRAY_SIZE(opencores_kbd->keycodes); + + __set_bit(EV_KEY, input->evbit); + + for (i = 0; i < ARRAY_SIZE(opencores_kbd->keycodes); i++) { + /* + * OpenCores controller happens to have scancodes match + * our KEY_* definitions. + */ + opencores_kbd->keycodes[i] = i; + __set_bit(opencores_kbd->keycodes[i], input->keybit); + } + __clear_bit(KEY_RESERVED, input->keybit); + + error = request_irq(irq, &opencores_kbd_isr, + IRQF_TRIGGER_RISING, pdev->name, opencores_kbd); + if (error) { + dev_err(&pdev->dev, "unable to claim irq %d\n", irq); + goto err_unmap_mem; + } + + error = input_register_device(input); + if (error) { + dev_err(&pdev->dev, "unable to register input device\n"); + goto err_free_irq; + } + + platform_set_drvdata(pdev, opencores_kbd); + + return 0; + + err_free_irq: + free_irq(irq, opencores_kbd); + err_unmap_mem: + iounmap(opencores_kbd->addr); + err_rel_mem: + release_mem_region(res->start, resource_size(res)); + err_free_mem: + input_free_device(input); + kfree(opencores_kbd); + + return error; +} + +static int __devexit opencores_kbd_remove(struct platform_device *pdev) +{ + struct opencores_kbd *opencores_kbd = platform_get_drvdata(pdev); + + free_irq(opencores_kbd->irq, opencores_kbd); + + iounmap(opencores_kbd->addr); + release_mem_region(opencores_kbd->addr_res->start, + resource_size(opencores_kbd->addr_res)); + input_unregister_device(opencores_kbd->input); + kfree(opencores_kbd); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver opencores_kbd_device_driver = { + .probe = opencores_kbd_probe, + .remove = __devexit_p(opencores_kbd_remove), + .driver = { + .name = "opencores-kbd", + }, +}; + +static int __init opencores_kbd_init(void) +{ + return platform_driver_register(&opencores_kbd_device_driver); +} +module_init(opencores_kbd_init); + +static void __exit opencores_kbd_exit(void) +{ + platform_driver_unregister(&opencores_kbd_device_driver); +} +module_exit(opencores_kbd_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Javier Herrero <jherrero@hvsistemas.es>"); +MODULE_DESCRIPTION("Keyboard driver for OpenCores Keyboard Controller"); diff --git a/drivers/input/keyboard/qt2160.c b/drivers/input/keyboard/qt2160.c new file mode 100644 index 00000000000..191cc51d6cf --- /dev/null +++ b/drivers/input/keyboard/qt2160.c @@ -0,0 +1,397 @@ +/* + * qt2160.c - Atmel AT42QT2160 Touch Sense Controller + * + * Copyright (C) 2009 Raphael Derosso Pereira <raphaelpereira@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/input.h> + +#define QT2160_VALID_CHIPID 0x11 + +#define QT2160_CMD_CHIPID 0 +#define QT2160_CMD_CODEVER 1 +#define QT2160_CMD_GSTAT 2 +#define QT2160_CMD_KEYS3 3 +#define QT2160_CMD_KEYS4 4 +#define QT2160_CMD_SLIDE 5 +#define QT2160_CMD_GPIOS 6 +#define QT2160_CMD_SUBVER 7 +#define QT2160_CMD_CALIBRATE 10 + +#define QT2160_CYCLE_INTERVAL (2*HZ) + +static unsigned char qt2160_key2code[] = { + KEY_0, KEY_1, KEY_2, KEY_3, + KEY_4, KEY_5, KEY_6, KEY_7, + KEY_8, KEY_9, KEY_A, KEY_B, + KEY_C, KEY_D, KEY_E, KEY_F, +}; + +struct qt2160_data { + struct i2c_client *client; + struct input_dev *input; + struct delayed_work dwork; + spinlock_t lock; /* Protects canceling/rescheduling of dwork */ + unsigned short keycodes[ARRAY_SIZE(qt2160_key2code)]; + u16 key_matrix; +}; + +static int qt2160_read_block(struct i2c_client *client, + u8 inireg, u8 *buffer, unsigned int count) +{ + int error, idx = 0; + + /* + * Can't use SMBus block data read. Check for I2C functionality to speed + * things up whenever possible. Otherwise we will be forced to read + * sequentially. + */ + if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + + error = i2c_smbus_write_byte(client, inireg + idx); + if (error) { + dev_err(&client->dev, + "couldn't send request. Returned %d\n", error); + return error; + } + + error = i2c_master_recv(client, buffer, count); + if (error != count) { + dev_err(&client->dev, + "couldn't read registers. Returned %d bytes\n", error); + return error; + } + } else { + + while (count--) { + int data; + + error = i2c_smbus_write_byte(client, inireg + idx); + if (error) { + dev_err(&client->dev, + "couldn't send request. Returned %d\n", error); + return error; + } + + data = i2c_smbus_read_byte(client); + if (data < 0) { + dev_err(&client->dev, + "couldn't read register. Returned %d\n", data); + return data; + } + + buffer[idx++] = data; + } + } + + return 0; +} + +static int qt2160_get_key_matrix(struct qt2160_data *qt2160) +{ + struct i2c_client *client = qt2160->client; + struct input_dev *input = qt2160->input; + u8 regs[6]; + u16 old_matrix, new_matrix; + int ret, i, mask; + + dev_dbg(&client->dev, "requesting keys...\n"); + + /* + * Read all registers from General Status Register + * to GPIOs register + */ + ret = qt2160_read_block(client, QT2160_CMD_GSTAT, regs, 6); + if (ret) { + dev_err(&client->dev, + "could not perform chip read.\n"); + return ret; + } + + old_matrix = qt2160->key_matrix; + qt2160->key_matrix = new_matrix = (regs[2] << 8) | regs[1]; + + mask = 0x01; + for (i = 0; i < 16; ++i, mask <<= 1) { + int keyval = new_matrix & mask; + + if ((old_matrix & mask) != keyval) { + input_report_key(input, qt2160->keycodes[i], keyval); + dev_dbg(&client->dev, "key %d %s\n", + i, keyval ? "pressed" : "released"); + } + } + + input_sync(input); + + return 0; +} + +static irqreturn_t qt2160_irq(int irq, void *_qt2160) +{ + struct qt2160_data *qt2160 = _qt2160; + unsigned long flags; + + spin_lock_irqsave(&qt2160->lock, flags); + + __cancel_delayed_work(&qt2160->dwork); + schedule_delayed_work(&qt2160->dwork, 0); + + spin_unlock_irqrestore(&qt2160->lock, flags); + + return IRQ_HANDLED; +} + +static void qt2160_schedule_read(struct qt2160_data *qt2160) +{ + spin_lock_irq(&qt2160->lock); + schedule_delayed_work(&qt2160->dwork, QT2160_CYCLE_INTERVAL); + spin_unlock_irq(&qt2160->lock); +} + +static void qt2160_worker(struct work_struct *work) +{ + struct qt2160_data *qt2160 = + container_of(work, struct qt2160_data, dwork.work); + + dev_dbg(&qt2160->client->dev, "worker\n"); + + qt2160_get_key_matrix(qt2160); + + /* Avoid device lock up by checking every so often */ + qt2160_schedule_read(qt2160); +} + +static int __devinit qt2160_read(struct i2c_client *client, u8 reg) +{ + int ret; + + ret = i2c_smbus_write_byte(client, reg); + if (ret) { + dev_err(&client->dev, + "couldn't send request. Returned %d\n", ret); + return ret; + } + + ret = i2c_smbus_read_byte(client); + if (ret < 0) { + dev_err(&client->dev, + "couldn't read register. Returned %d\n", ret); + return ret; + } + + return ret; +} + +static int __devinit qt2160_write(struct i2c_client *client, u8 reg, u8 data) +{ + int error; + + error = i2c_smbus_write_byte(client, reg); + if (error) { + dev_err(&client->dev, + "couldn't send request. Returned %d\n", error); + return error; + } + + error = i2c_smbus_write_byte(client, data); + if (error) { + dev_err(&client->dev, + "couldn't write data. Returned %d\n", error); + return error; + } + + return error; +} + + +static bool __devinit qt2160_identify(struct i2c_client *client) +{ + int id, ver, rev; + + /* Read Chid ID to check if chip is valid */ + id = qt2160_read(client, QT2160_CMD_CHIPID); + if (id != QT2160_VALID_CHIPID) { + dev_err(&client->dev, "ID %d not supported\n", id); + return false; + } + + /* Read chip firmware version */ + ver = qt2160_read(client, QT2160_CMD_CODEVER); + if (ver < 0) { + dev_err(&client->dev, "could not get firmware version\n"); + return false; + } + + /* Read chip firmware revision */ + rev = qt2160_read(client, QT2160_CMD_SUBVER); + if (rev < 0) { + dev_err(&client->dev, "could not get firmware revision\n"); + return false; + } + + dev_info(&client->dev, "AT42QT2160 firmware version %d.%d.%d\n", + ver >> 4, ver & 0xf, rev); + + return true; +} + +static int __devinit qt2160_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct qt2160_data *qt2160; + struct input_dev *input; + int i; + int error; + + /* Check functionality */ + error = i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE); + if (!error) { + dev_err(&client->dev, "%s adapter not supported\n", + dev_driver_string(&client->adapter->dev)); + return -ENODEV; + } + + if (!qt2160_identify(client)) + return -ENODEV; + + /* Chip is valid and active. Allocate structure */ + qt2160 = kzalloc(sizeof(struct qt2160_data), GFP_KERNEL); + input = input_allocate_device(); + if (!qt2160 || !input) { + dev_err(&client->dev, "insufficient memory\n"); + error = -ENOMEM; + goto err_free_mem; + } + + qt2160->client = client; + qt2160->input = input; + INIT_DELAYED_WORK(&qt2160->dwork, qt2160_worker); + spin_lock_init(&qt2160->lock); + + input->name = "AT42QT2160 Touch Sense Keyboard"; + input->id.bustype = BUS_I2C; + + input->keycode = qt2160->keycodes; + input->keycodesize = sizeof(qt2160->keycodes[0]); + input->keycodemax = ARRAY_SIZE(qt2160_key2code); + + __set_bit(EV_KEY, input->evbit); + __clear_bit(EV_REP, input->evbit); + for (i = 0; i < ARRAY_SIZE(qt2160_key2code); i++) { + qt2160->keycodes[i] = qt2160_key2code[i]; + __set_bit(qt2160_key2code[i], input->keybit); + } + __clear_bit(KEY_RESERVED, input->keybit); + + /* Calibrate device */ + error = qt2160_write(client, QT2160_CMD_CALIBRATE, 1); + if (error) { + dev_err(&client->dev, "failed to calibrate device\n"); + goto err_free_mem; + } + + if (client->irq) { + error = request_irq(client->irq, qt2160_irq, + IRQF_TRIGGER_FALLING, "qt2160", qt2160); + if (error) { + dev_err(&client->dev, + "failed to allocate irq %d\n", client->irq); + goto err_free_mem; + } + } + + error = input_register_device(qt2160->input); + if (error) { + dev_err(&client->dev, + "Failed to register input device\n"); + goto err_free_irq; + } + + i2c_set_clientdata(client, qt2160); + qt2160_schedule_read(qt2160); + + return 0; + +err_free_irq: + if (client->irq) + free_irq(client->irq, qt2160); +err_free_mem: + input_free_device(input); + kfree(qt2160); + return error; +} + +static int __devexit qt2160_remove(struct i2c_client *client) +{ + struct qt2160_data *qt2160 = i2c_get_clientdata(client); + + /* Release IRQ so no queue will be scheduled */ + if (client->irq) + free_irq(client->irq, qt2160); + + cancel_delayed_work_sync(&qt2160->dwork); + + input_unregister_device(qt2160->input); + kfree(qt2160); + + i2c_set_clientdata(client, NULL); + return 0; +} + +static struct i2c_device_id qt2160_idtable[] = { + { "qt2160", 0, }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, qt2160_idtable); + +static struct i2c_driver qt2160_driver = { + .driver = { + .name = "qt2160", + .owner = THIS_MODULE, + }, + + .id_table = qt2160_idtable, + .probe = qt2160_probe, + .remove = __devexit_p(qt2160_remove), +}; + +static int __init qt2160_init(void) +{ + return i2c_add_driver(&qt2160_driver); +} +module_init(qt2160_init); + +static void __exit qt2160_cleanup(void) +{ + i2c_del_driver(&qt2160_driver); +} +module_exit(qt2160_cleanup); + +MODULE_AUTHOR("Raphael Derosso Pereira <raphaelpereira@gmail.com>"); +MODULE_DESCRIPTION("Driver for AT42QT2160 Touch Sensor"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c index 0714bf2c28f..887af79b7bf 100644 --- a/drivers/input/keyboard/sh_keysc.c +++ b/drivers/input/keyboard/sh_keysc.c @@ -80,6 +80,9 @@ static irqreturn_t sh_keysc_isr(int irq, void *dev_id) iowrite16(KYCR2_IRQ_LEVEL | (keyin_set << 8), priv->iomem_base + KYCR2_OFFS); + if (pdata->kycr2_delay) + udelay(pdata->kycr2_delay); + keys ^= ~0; keys &= (1 << (sh_keysc_mode[pdata->mode].keyin * sh_keysc_mode[pdata->mode].keyout)) - 1; diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index cbe21bc96b5..02f4f8f1db6 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -222,6 +222,23 @@ config INPUT_SGI_BTNS To compile this driver as a module, choose M here: the module will be called sgi_btns. +config INPUT_WINBOND_CIR + tristate "Winbond IR remote control" + depends on X86 && PNP + select NEW_LEDS + select LEDS_CLASS + select BITREVERSE + help + Say Y here if you want to use the IR remote functionality found + in some Winbond SuperI/O chips. Currently only the WPCD376I + chip is supported (included in some Intel Media series motherboards). + + IR Receive and wake-on-IR from suspend and power-off is currently + supported. + + To compile this driver as a module, choose M here: the module will be + called winbond_cir. + config HP_SDC_RTC tristate "HP SDC Real Time Clock" depends on (GSC || HP300) && SERIO @@ -279,4 +296,24 @@ config INPUT_BFIN_ROTARY To compile this driver as a module, choose M here: the module will be called bfin-rotary. +config INPUT_WM831X_ON + tristate "WM831X ON pin" + depends on MFD_WM831X + help + Support the ON pin of WM831X PMICs as an input device + reporting power button status. + + To compile this driver as a module, choose M here: the module + will be called wm831x_on. + +config INPUT_PCAP + tristate "Motorola EZX PCAP misc input events" + depends on EZX_PCAP + help + Say Y here if you want to use Power key and Headphone button + on Motorola EZX phones. + + To compile this driver as a module, choose M here: the + module will be called pcap_keys. + endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 79c1e9a5ea3..a8b84854fb7 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o +obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o obj-$(CONFIG_INPUT_POWERMATE) += powermate.o @@ -25,5 +26,8 @@ obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON) += twl4030-pwrbutton.o obj-$(CONFIG_INPUT_UINPUT) += uinput.o +obj-$(CONFIG_INPUT_WINBOND_CIR) += winbond-cir.o obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o +obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o obj-$(CONFIG_INPUT_YEALINK) += yealink.o + diff --git a/drivers/input/misc/dm355evm_keys.c b/drivers/input/misc/dm355evm_keys.c index 0918acae584..f2b67dc81d8 100644 --- a/drivers/input/misc/dm355evm_keys.c +++ b/drivers/input/misc/dm355evm_keys.c @@ -96,7 +96,13 @@ static struct { { 0x3169, KEY_PAUSE, }, }; -/* runs in an IRQ thread -- can (and will!) sleep */ +/* + * Because we communicate with the MSP430 using I2C, and all I2C calls + * in Linux sleep, we use a threaded IRQ handler. The IRQ itself is + * active low, but we go through the GPIO controller so we can trigger + * on falling edges and not worry about enabling/disabling the IRQ in + * the keypress handling path. + */ static irqreturn_t dm355evm_keys_irq(int irq, void *_keys) { struct dm355evm_keys *keys = _keys; @@ -171,18 +177,6 @@ static irqreturn_t dm355evm_keys_irq(int irq, void *_keys) return IRQ_HANDLED; } -/* - * Because we communicate with the MSP430 using I2C, and all I2C calls - * in Linux sleep, we use a threaded IRQ handler. The IRQ itself is - * active low, but we go through the GPIO controller so we can trigger - * on falling edges and not worry about enabling/disabling the IRQ in - * the keypress handling path. - */ -static irqreturn_t dm355evm_keys_hardirq(int irq, void *_keys) -{ - return IRQ_WAKE_THREAD; -} - static int dm355evm_setkeycode(struct input_dev *dev, int index, int keycode) { u16 old_keycode; @@ -257,10 +251,8 @@ static int __devinit dm355evm_keys_probe(struct platform_device *pdev) /* REVISIT: flush the event queue? */ - status = request_threaded_irq(keys->irq, - dm355evm_keys_hardirq, dm355evm_keys_irq, - IRQF_TRIGGER_FALLING, - dev_name(&pdev->dev), keys); + status = request_threaded_irq(keys->irq, NULL, dm355evm_keys_irq, + IRQF_TRIGGER_FALLING, dev_name(&pdev->dev), keys); if (status < 0) goto fail1; diff --git a/drivers/input/misc/pcap_keys.c b/drivers/input/misc/pcap_keys.c new file mode 100644 index 00000000000..7ea969347ca --- /dev/null +++ b/drivers/input/misc/pcap_keys.c @@ -0,0 +1,144 @@ +/* + * Input driver for PCAP events: + * * Power key + * * Headphone button + * + * Copyright (c) 2008,2009 Ilya Petrov <ilya.muromec@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/mfd/ezx-pcap.h> + +struct pcap_keys { + struct pcap_chip *pcap; + struct input_dev *input; +}; + +/* PCAP2 interrupts us on keypress */ +static irqreturn_t pcap_keys_handler(int irq, void *_pcap_keys) +{ + struct pcap_keys *pcap_keys = _pcap_keys; + int pirq = irq_to_pcap(pcap_keys->pcap, irq); + u32 pstat; + + ezx_pcap_read(pcap_keys->pcap, PCAP_REG_PSTAT, &pstat); + pstat &= 1 << pirq; + + switch (pirq) { + case PCAP_IRQ_ONOFF: + input_report_key(pcap_keys->input, KEY_POWER, !pstat); + break; + case PCAP_IRQ_MIC: + input_report_key(pcap_keys->input, KEY_HP, !pstat); + break; + } + + input_sync(pcap_keys->input); + + return IRQ_HANDLED; +} + +static int __devinit pcap_keys_probe(struct platform_device *pdev) +{ + int err = -ENOMEM; + struct pcap_keys *pcap_keys; + struct input_dev *input_dev; + + pcap_keys = kmalloc(sizeof(struct pcap_keys), GFP_KERNEL); + if (!pcap_keys) + return err; + + pcap_keys->pcap = dev_get_drvdata(pdev->dev.parent); + + input_dev = input_allocate_device(); + if (!input_dev) + goto fail; + + pcap_keys->input = input_dev; + + platform_set_drvdata(pdev, pcap_keys); + input_dev->name = pdev->name; + input_dev->phys = "pcap-keys/input0"; + input_dev->id.bustype = BUS_HOST; + input_dev->dev.parent = &pdev->dev; + + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(KEY_POWER, input_dev->keybit); + __set_bit(KEY_HP, input_dev->keybit); + + err = input_register_device(input_dev); + if (err) + goto fail_allocate; + + err = request_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_ONOFF), + pcap_keys_handler, 0, "Power key", pcap_keys); + if (err) + goto fail_register; + + err = request_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_MIC), + pcap_keys_handler, 0, "Headphone button", pcap_keys); + if (err) + goto fail_pwrkey; + + return 0; + +fail_pwrkey: + free_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_ONOFF), pcap_keys); +fail_register: + input_unregister_device(input_dev); + goto fail; +fail_allocate: + input_free_device(input_dev); +fail: + kfree(pcap_keys); + return err; +} + +static int __devexit pcap_keys_remove(struct platform_device *pdev) +{ + struct pcap_keys *pcap_keys = platform_get_drvdata(pdev); + + free_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_ONOFF), pcap_keys); + free_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_MIC), pcap_keys); + + input_unregister_device(pcap_keys->input); + kfree(pcap_keys); + + return 0; +} + +static struct platform_driver pcap_keys_device_driver = { + .probe = pcap_keys_probe, + .remove = __devexit_p(pcap_keys_remove), + .driver = { + .name = "pcap-keys", + .owner = THIS_MODULE, + } +}; + +static int __init pcap_keys_init(void) +{ + return platform_driver_register(&pcap_keys_device_driver); +}; + +static void __exit pcap_keys_exit(void) +{ + platform_driver_unregister(&pcap_keys_device_driver); +}; + +module_init(pcap_keys_init); +module_exit(pcap_keys_exit); + +MODULE_DESCRIPTION("Motorola PCAP2 input events driver"); +MODULE_AUTHOR("Ilya Petrov <ilya.muromec@gmail.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pcap_keys"); diff --git a/drivers/input/misc/winbond-cir.c b/drivers/input/misc/winbond-cir.c new file mode 100644 index 00000000000..33309fe44e2 --- /dev/null +++ b/drivers/input/misc/winbond-cir.c @@ -0,0 +1,1614 @@ +/* + * winbond-cir.c - Driver for the Consumer IR functionality of Winbond + * SuperI/O chips. + * + * Currently supports the Winbond WPCD376i chip (PNP id WEC1022), but + * could probably support others (Winbond WEC102X, NatSemi, etc) + * with minor modifications. + * + * Original Author: David Härdeman <david@hardeman.nu> + * Copyright (C) 2009 David Härdeman <david@hardeman.nu> + * + * Dedicated to Matilda, my newborn daughter, without whose loving attention + * this driver would have been finished in half the time and with a fraction + * of the bugs. + * + * Written using: + * o Winbond WPCD376I datasheet helpfully provided by Jesse Barnes at Intel + * o NatSemi PC87338/PC97338 datasheet (for the serial port stuff) + * o DSDT dumps + * + * Supported features: + * o RC6 + * o Wake-On-CIR functionality + * + * To do: + * o Test NEC and RC5 + * + * Left as an exercise for the reader: + * o Learning (I have neither the hardware, nor the need) + * o IR Transmit (ibid) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/pnp.h> +#include <linux/interrupt.h> +#include <linux/timer.h> +#include <linux/input.h> +#include <linux/leds.h> +#include <linux/list.h> +#include <linux/spinlock.h> +#include <linux/pci_ids.h> +#include <linux/io.h> +#include <linux/bitrev.h> +#include <linux/bitops.h> + +#define DRVNAME "winbond-cir" + +/* CEIR Wake-Up Registers, relative to data->wbase */ +#define WBCIR_REG_WCEIR_CTL 0x03 /* CEIR Receiver Control */ +#define WBCIR_REG_WCEIR_STS 0x04 /* CEIR Receiver Status */ +#define WBCIR_REG_WCEIR_EV_EN 0x05 /* CEIR Receiver Event Enable */ +#define WBCIR_REG_WCEIR_CNTL 0x06 /* CEIR Receiver Counter Low */ +#define WBCIR_REG_WCEIR_CNTH 0x07 /* CEIR Receiver Counter High */ +#define WBCIR_REG_WCEIR_INDEX 0x08 /* CEIR Receiver Index */ +#define WBCIR_REG_WCEIR_DATA 0x09 /* CEIR Receiver Data */ +#define WBCIR_REG_WCEIR_CSL 0x0A /* CEIR Re. Compare Strlen */ +#define WBCIR_REG_WCEIR_CFG1 0x0B /* CEIR Re. Configuration 1 */ +#define WBCIR_REG_WCEIR_CFG2 0x0C /* CEIR Re. Configuration 2 */ + +/* CEIR Enhanced Functionality Registers, relative to data->ebase */ +#define WBCIR_REG_ECEIR_CTS 0x00 /* Enhanced IR Control Status */ +#define WBCIR_REG_ECEIR_CCTL 0x01 /* Infrared Counter Control */ +#define WBCIR_REG_ECEIR_CNT_LO 0x02 /* Infrared Counter LSB */ +#define WBCIR_REG_ECEIR_CNT_HI 0x03 /* Infrared Counter MSB */ +#define WBCIR_REG_ECEIR_IREM 0x04 /* Infrared Emitter Status */ + +/* SP3 Banked Registers, relative to data->sbase */ +#define WBCIR_REG_SP3_BSR 0x03 /* Bank Select, all banks */ + /* Bank 0 */ +#define WBCIR_REG_SP3_RXDATA 0x00 /* FIFO RX data (r) */ +#define WBCIR_REG_SP3_TXDATA 0x00 /* FIFO TX data (w) */ +#define WBCIR_REG_SP3_IER 0x01 /* Interrupt Enable */ +#define WBCIR_REG_SP3_EIR 0x02 /* Event Identification (r) */ +#define WBCIR_REG_SP3_FCR 0x02 /* FIFO Control (w) */ +#define WBCIR_REG_SP3_MCR 0x04 /* Mode Control */ +#define WBCIR_REG_SP3_LSR 0x05 /* Link Status */ +#define WBCIR_REG_SP3_MSR 0x06 /* Modem Status */ +#define WBCIR_REG_SP3_ASCR 0x07 /* Aux Status and Control */ + /* Bank 2 */ +#define WBCIR_REG_SP3_BGDL 0x00 /* Baud Divisor LSB */ +#define WBCIR_REG_SP3_BGDH 0x01 /* Baud Divisor MSB */ +#define WBCIR_REG_SP3_EXCR1 0x02 /* Extended Control 1 */ +#define WBCIR_REG_SP3_EXCR2 0x04 /* Extended Control 2 */ +#define WBCIR_REG_SP3_TXFLV 0x06 /* TX FIFO Level */ +#define WBCIR_REG_SP3_RXFLV 0x07 /* RX FIFO Level */ + /* Bank 3 */ +#define WBCIR_REG_SP3_MRID 0x00 /* Module Identification */ +#define WBCIR_REG_SP3_SH_LCR 0x01 /* LCR Shadow */ +#define WBCIR_REG_SP3_SH_FCR 0x02 /* FCR Shadow */ + /* Bank 4 */ +#define WBCIR_REG_SP3_IRCR1 0x02 /* Infrared Control 1 */ + /* Bank 5 */ +#define WBCIR_REG_SP3_IRCR2 0x04 /* Infrared Control 2 */ + /* Bank 6 */ +#define WBCIR_REG_SP3_IRCR3 0x00 /* Infrared Control 3 */ +#define WBCIR_REG_SP3_SIR_PW 0x02 /* SIR Pulse Width */ + /* Bank 7 */ +#define WBCIR_REG_SP3_IRRXDC 0x00 /* IR RX Demod Control */ +#define WBCIR_REG_SP3_IRTXMC 0x01 /* IR TX Mod Control */ +#define WBCIR_REG_SP3_RCCFG 0x02 /* CEIR Config */ +#define WBCIR_REG_SP3_IRCFG1 0x04 /* Infrared Config 1 */ +#define WBCIR_REG_SP3_IRCFG4 0x07 /* Infrared Config 4 */ + +/* + * Magic values follow + */ + +/* No interrupts for WBCIR_REG_SP3_IER and WBCIR_REG_SP3_EIR */ +#define WBCIR_IRQ_NONE 0x00 +/* RX data bit for WBCIR_REG_SP3_IER and WBCIR_REG_SP3_EIR */ +#define WBCIR_IRQ_RX 0x01 +/* Over/Under-flow bit for WBCIR_REG_SP3_IER and WBCIR_REG_SP3_EIR */ +#define WBCIR_IRQ_ERR 0x04 +/* Led enable/disable bit for WBCIR_REG_ECEIR_CTS */ +#define WBCIR_LED_ENABLE 0x80 +/* RX data available bit for WBCIR_REG_SP3_LSR */ +#define WBCIR_RX_AVAIL 0x01 +/* RX disable bit for WBCIR_REG_SP3_ASCR */ +#define WBCIR_RX_DISABLE 0x20 +/* Extended mode enable bit for WBCIR_REG_SP3_EXCR1 */ +#define WBCIR_EXT_ENABLE 0x01 +/* Select compare register in WBCIR_REG_WCEIR_INDEX (bits 5 & 6) */ +#define WBCIR_REGSEL_COMPARE 0x10 +/* Select mask register in WBCIR_REG_WCEIR_INDEX (bits 5 & 6) */ +#define WBCIR_REGSEL_MASK 0x20 +/* Starting address of selected register in WBCIR_REG_WCEIR_INDEX */ +#define WBCIR_REG_ADDR0 0x00 + +/* Valid banks for the SP3 UART */ +enum wbcir_bank { + WBCIR_BANK_0 = 0x00, + WBCIR_BANK_1 = 0x80, + WBCIR_BANK_2 = 0xE0, + WBCIR_BANK_3 = 0xE4, + WBCIR_BANK_4 = 0xE8, + WBCIR_BANK_5 = 0xEC, + WBCIR_BANK_6 = 0xF0, + WBCIR_BANK_7 = 0xF4, +}; + +/* Supported IR Protocols */ +enum wbcir_protocol { + IR_PROTOCOL_RC5 = 0x0, + IR_PROTOCOL_NEC = 0x1, + IR_PROTOCOL_RC6 = 0x2, +}; + +/* Misc */ +#define WBCIR_NAME "Winbond CIR" +#define WBCIR_ID_FAMILY 0xF1 /* Family ID for the WPCD376I */ +#define WBCIR_ID_CHIP 0x04 /* Chip ID for the WPCD376I */ +#define IR_KEYPRESS_TIMEOUT 250 /* FIXME: should be per-protocol? */ +#define INVALID_SCANCODE 0x7FFFFFFF /* Invalid with all protos */ +#define WAKEUP_IOMEM_LEN 0x10 /* Wake-Up I/O Reg Len */ +#define EHFUNC_IOMEM_LEN 0x10 /* Enhanced Func I/O Reg Len */ +#define SP_IOMEM_LEN 0x08 /* Serial Port 3 (IR) Reg Len */ +#define WBCIR_MAX_IDLE_BYTES 10 + +static DEFINE_SPINLOCK(wbcir_lock); +static DEFINE_RWLOCK(keytable_lock); + +struct wbcir_key { + u32 scancode; + unsigned int keycode; +}; + +struct wbcir_keyentry { + struct wbcir_key key; + struct list_head list; +}; + +static struct wbcir_key rc6_def_keymap[] = { + { 0x800F0400, KEY_NUMERIC_0 }, + { 0x800F0401, KEY_NUMERIC_1 }, + { 0x800F0402, KEY_NUMERIC_2 }, + { 0x800F0403, KEY_NUMERIC_3 }, + { 0x800F0404, KEY_NUMERIC_4 }, + { 0x800F0405, KEY_NUMERIC_5 }, + { 0x800F0406, KEY_NUMERIC_6 }, + { 0x800F0407, KEY_NUMERIC_7 }, + { 0x800F0408, KEY_NUMERIC_8 }, + { 0x800F0409, KEY_NUMERIC_9 }, + { 0x800F041D, KEY_NUMERIC_STAR }, + { 0x800F041C, KEY_NUMERIC_POUND }, + { 0x800F0410, KEY_VOLUMEUP }, + { 0x800F0411, KEY_VOLUMEDOWN }, + { 0x800F0412, KEY_CHANNELUP }, + { 0x800F0413, KEY_CHANNELDOWN }, + { 0x800F040E, KEY_MUTE }, + { 0x800F040D, KEY_VENDOR }, /* Vista Logo Key */ + { 0x800F041E, KEY_UP }, + { 0x800F041F, KEY_DOWN }, + { 0x800F0420, KEY_LEFT }, + { 0x800F0421, KEY_RIGHT }, + { 0x800F0422, KEY_OK }, + { 0x800F0423, KEY_ESC }, + { 0x800F040F, KEY_INFO }, + { 0x800F040A, KEY_CLEAR }, + { 0x800F040B, KEY_ENTER }, + { 0x800F045B, KEY_RED }, + { 0x800F045C, KEY_GREEN }, + { 0x800F045D, KEY_YELLOW }, + { 0x800F045E, KEY_BLUE }, + { 0x800F045A, KEY_TEXT }, + { 0x800F0427, KEY_SWITCHVIDEOMODE }, + { 0x800F040C, KEY_POWER }, + { 0x800F0450, KEY_RADIO }, + { 0x800F0448, KEY_PVR }, + { 0x800F0447, KEY_AUDIO }, + { 0x800F0426, KEY_EPG }, + { 0x800F0449, KEY_CAMERA }, + { 0x800F0425, KEY_TV }, + { 0x800F044A, KEY_VIDEO }, + { 0x800F0424, KEY_DVD }, + { 0x800F0416, KEY_PLAY }, + { 0x800F0418, KEY_PAUSE }, + { 0x800F0419, KEY_STOP }, + { 0x800F0414, KEY_FASTFORWARD }, + { 0x800F041A, KEY_NEXT }, + { 0x800F041B, KEY_PREVIOUS }, + { 0x800F0415, KEY_REWIND }, + { 0x800F0417, KEY_RECORD }, +}; + +/* Registers and other state is protected by wbcir_lock */ +struct wbcir_data { + unsigned long wbase; /* Wake-Up Baseaddr */ + unsigned long ebase; /* Enhanced Func. Baseaddr */ + unsigned long sbase; /* Serial Port Baseaddr */ + unsigned int irq; /* Serial Port IRQ */ + + struct input_dev *input_dev; + struct timer_list timer_keyup; + struct led_trigger *rxtrigger; + struct led_trigger *txtrigger; + struct led_classdev led; + + u32 last_scancode; + unsigned int last_keycode; + u8 last_toggle; + u8 keypressed; + unsigned long keyup_jiffies; + unsigned int idle_count; + + /* RX irdata and parsing state */ + unsigned long irdata[30]; + unsigned int irdata_count; + unsigned int irdata_idle; + unsigned int irdata_off; + unsigned int irdata_error; + + /* Protected by keytable_lock */ + struct list_head keytable; +}; + +static enum wbcir_protocol protocol = IR_PROTOCOL_RC6; +module_param(protocol, uint, 0444); +MODULE_PARM_DESC(protocol, "IR protocol to use " + "(0 = RC5, 1 = NEC, 2 = RC6A, default)"); + +static int invert; /* default = 0 */ +module_param(invert, bool, 0444); +MODULE_PARM_DESC(invert, "Invert the signal from the IR receiver"); + +static unsigned int wake_sc = 0x800F040C; +module_param(wake_sc, uint, 0644); +MODULE_PARM_DESC(wake_sc, "Scancode of the power-on IR command"); + +static unsigned int wake_rc6mode = 6; +module_param(wake_rc6mode, uint, 0644); +MODULE_PARM_DESC(wake_rc6mode, "RC6 mode for the power-on command " + "(0 = 0, 6 = 6A, default)"); + + + +/***************************************************************************** + * + * UTILITY FUNCTIONS + * + *****************************************************************************/ + +/* Caller needs to hold wbcir_lock */ +static void +wbcir_set_bits(unsigned long addr, u8 bits, u8 mask) +{ + u8 val; + + val = inb(addr); + val = ((val & ~mask) | (bits & mask)); + outb(val, addr); +} + +/* Selects the register bank for the serial port */ +static inline void +wbcir_select_bank(struct wbcir_data *data, enum wbcir_bank bank) +{ + outb(bank, data->sbase + WBCIR_REG_SP3_BSR); +} + +static enum led_brightness +wbcir_led_brightness_get(struct led_classdev *led_cdev) +{ + struct wbcir_data *data = container_of(led_cdev, + struct wbcir_data, + led); + + if (inb(data->ebase + WBCIR_REG_ECEIR_CTS) & WBCIR_LED_ENABLE) + return LED_FULL; + else + return LED_OFF; +} + +static void +wbcir_led_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct wbcir_data *data = container_of(led_cdev, + struct wbcir_data, + led); + + wbcir_set_bits(data->ebase + WBCIR_REG_ECEIR_CTS, + brightness == LED_OFF ? 0x00 : WBCIR_LED_ENABLE, + WBCIR_LED_ENABLE); +} + +/* Manchester encodes bits to RC6 message cells (see wbcir_parse_rc6) */ +static u8 +wbcir_to_rc6cells(u8 val) +{ + u8 coded = 0x00; + int i; + + val &= 0x0F; + for (i = 0; i < 4; i++) { + if (val & 0x01) + coded |= 0x02 << (i * 2); + else + coded |= 0x01 << (i * 2); + val >>= 1; + } + + return coded; +} + + + +/***************************************************************************** + * + * INPUT FUNCTIONS + * + *****************************************************************************/ + +static unsigned int +wbcir_do_getkeycode(struct wbcir_data *data, u32 scancode) +{ + struct wbcir_keyentry *keyentry; + unsigned int keycode = KEY_RESERVED; + unsigned long flags; + + read_lock_irqsave(&keytable_lock, flags); + + list_for_each_entry(keyentry, &data->keytable, list) { + if (keyentry->key.scancode == scancode) { + keycode = keyentry->key.keycode; + break; + } + } + + read_unlock_irqrestore(&keytable_lock, flags); + return keycode; +} + +static int +wbcir_getkeycode(struct input_dev *dev, int scancode, int *keycode) +{ + struct wbcir_data *data = input_get_drvdata(dev); + + *keycode = (int)wbcir_do_getkeycode(data, (u32)scancode); + return 0; +} + +static int +wbcir_setkeycode(struct input_dev *dev, int sscancode, int keycode) +{ + struct wbcir_data *data = input_get_drvdata(dev); + struct wbcir_keyentry *keyentry; + struct wbcir_keyentry *new_keyentry; + unsigned long flags; + unsigned int old_keycode = KEY_RESERVED; + u32 scancode = (u32)sscancode; + + if (keycode < 0 || keycode > KEY_MAX) + return -EINVAL; + + new_keyentry = kmalloc(sizeof(*new_keyentry), GFP_KERNEL); + if (!new_keyentry) + return -ENOMEM; + + write_lock_irqsave(&keytable_lock, flags); + + list_for_each_entry(keyentry, &data->keytable, list) { + if (keyentry->key.scancode != scancode) + continue; + + old_keycode = keyentry->key.keycode; + keyentry->key.keycode = keycode; + + if (keyentry->key.keycode == KEY_RESERVED) { + list_del(&keyentry->list); + kfree(keyentry); + } + + break; + } + + set_bit(keycode, dev->keybit); + + if (old_keycode == KEY_RESERVED) { + new_keyentry->key.scancode = scancode; + new_keyentry->key.keycode = keycode; + list_add(&new_keyentry->list, &data->keytable); + } else { + kfree(new_keyentry); + clear_bit(old_keycode, dev->keybit); + list_for_each_entry(keyentry, &data->keytable, list) { + if (keyentry->key.keycode == old_keycode) { + set_bit(old_keycode, dev->keybit); + break; + } + } + } + + write_unlock_irqrestore(&keytable_lock, flags); + return 0; +} + +/* + * Timer function to report keyup event some time after keydown is + * reported by the ISR. + */ +static void +wbcir_keyup(unsigned long cookie) +{ + struct wbcir_data *data = (struct wbcir_data *)cookie; + unsigned long flags; + + /* + * data->keyup_jiffies is used to prevent a race condition if a + * hardware interrupt occurs at this point and the keyup timer + * event is moved further into the future as a result. + * + * The timer will then be reactivated and this function called + * again in the future. We need to exit gracefully in that case + * to allow the input subsystem to do its auto-repeat magic or + * a keyup event might follow immediately after the keydown. + */ + + spin_lock_irqsave(&wbcir_lock, flags); + + if (time_is_after_eq_jiffies(data->keyup_jiffies) && data->keypressed) { + data->keypressed = 0; + led_trigger_event(data->rxtrigger, LED_OFF); + input_report_key(data->input_dev, data->last_keycode, 0); + input_sync(data->input_dev); + } + + spin_unlock_irqrestore(&wbcir_lock, flags); +} + +static void +wbcir_keydown(struct wbcir_data *data, u32 scancode, u8 toggle) +{ + unsigned int keycode; + + /* Repeat? */ + if (data->last_scancode == scancode && + data->last_toggle == toggle && + data->keypressed) + goto set_timer; + data->last_scancode = scancode; + + /* Do we need to release an old keypress? */ + if (data->keypressed) { + input_report_key(data->input_dev, data->last_keycode, 0); + input_sync(data->input_dev); + data->keypressed = 0; + } + + /* Report scancode */ + input_event(data->input_dev, EV_MSC, MSC_SCAN, (int)scancode); + + /* Do we know this scancode? */ + keycode = wbcir_do_getkeycode(data, scancode); + if (keycode == KEY_RESERVED) + goto set_timer; + + /* Register a keypress */ + input_report_key(data->input_dev, keycode, 1); + data->keypressed = 1; + data->last_keycode = keycode; + data->last_toggle = toggle; + +set_timer: + input_sync(data->input_dev); + led_trigger_event(data->rxtrigger, + data->keypressed ? LED_FULL : LED_OFF); + data->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT); + mod_timer(&data->timer_keyup, data->keyup_jiffies); +} + + + +/***************************************************************************** + * + * IR PARSING FUNCTIONS + * + *****************************************************************************/ + +/* Resets all irdata */ +static void +wbcir_reset_irdata(struct wbcir_data *data) +{ + memset(data->irdata, 0, sizeof(data->irdata)); + data->irdata_count = 0; + data->irdata_off = 0; + data->irdata_error = 0; +} + +/* Adds one bit of irdata */ +static void +add_irdata_bit(struct wbcir_data *data, int set) +{ + if (data->irdata_count >= sizeof(data->irdata) * 8) { + data->irdata_error = 1; + return; + } + + if (set) + __set_bit(data->irdata_count, data->irdata); + data->irdata_count++; +} + +/* Gets count bits of irdata */ +static u16 +get_bits(struct wbcir_data *data, int count) +{ + u16 val = 0x0; + + if (data->irdata_count - data->irdata_off < count) { + data->irdata_error = 1; + return 0x0; + } + + while (count > 0) { + val <<= 1; + if (test_bit(data->irdata_off, data->irdata)) + val |= 0x1; + count--; + data->irdata_off++; + } + + return val; +} + +/* Reads 16 cells and converts them to a byte */ +static u8 +wbcir_rc6cells_to_byte(struct wbcir_data *data) +{ + u16 raw = get_bits(data, 16); + u8 val = 0x00; + int bit; + + for (bit = 0; bit < 8; bit++) { + switch (raw & 0x03) { + case 0x01: + break; + case 0x02: + val |= (0x01 << bit); + break; + default: + data->irdata_error = 1; + break; + } + raw >>= 2; + } + + return val; +} + +/* Decodes a number of bits from raw RC5 data */ +static u8 +wbcir_get_rc5bits(struct wbcir_data *data, unsigned int count) +{ + u16 raw = get_bits(data, count * 2); + u8 val = 0x00; + int bit; + + for (bit = 0; bit < count; bit++) { + switch (raw & 0x03) { + case 0x01: + val |= (0x01 << bit); + break; + case 0x02: + break; + default: + data->irdata_error = 1; + break; + } + raw >>= 2; + } + + return val; +} + +static void +wbcir_parse_rc6(struct device *dev, struct wbcir_data *data) +{ + /* + * Normal bits are manchester coded as follows: + * cell0 + cell1 = logic "0" + * cell1 + cell0 = logic "1" + * + * The IR pulse has the following components: + * + * Leader - 6 * cell1 - discarded + * Gap - 2 * cell0 - discarded + * Start bit - Normal Coding - always "1" + * Mode Bit 2 - 0 - Normal Coding + * Toggle bit - Normal Coding with double bit time, + * e.g. cell0 + cell0 + cell1 + cell1 + * means logic "0". + * + * The rest depends on the mode, the following modes are known: + * + * MODE 0: + * Address Bit 7 - 0 - Normal Coding + * Command Bit 7 - 0 - Normal Coding + * + * MODE 6: + * The above Toggle Bit is used as a submode bit, 0 = A, 1 = B. + * Submode B is for pointing devices, only remotes using submode A + * are supported. + * + * Customer range bit - 0 => Customer = 7 bits, 0...127 + * 1 => Customer = 15 bits, 32768...65535 + * Customer Bits - Normal Coding + * + * Customer codes are allocated by Philips. The rest of the bits + * are customer dependent. The following is commonly used (and the + * only supported config): + * + * Toggle Bit - Normal Coding + * Address Bit 6 - 0 - Normal Coding + * Command Bit 7 - 0 - Normal Coding + * + * All modes are followed by at least 6 * cell0. + * + * MODE 0 msglen: + * 1 * 2 (start bit) + 3 * 2 (mode) + 2 * 2 (toggle) + + * 8 * 2 (address) + 8 * 2 (command) = + * 44 cells + * + * MODE 6A msglen: + * 1 * 2 (start bit) + 3 * 2 (mode) + 2 * 2 (submode) + + * 1 * 2 (customer range bit) + 7/15 * 2 (customer bits) + + * 1 * 2 (toggle bit) + 7 * 2 (address) + 8 * 2 (command) = + * 60 - 76 cells + */ + u8 mode; + u8 toggle; + u16 customer = 0x0; + u8 address; + u8 command; + u32 scancode; + + /* Leader mark */ + while (get_bits(data, 1) && !data->irdata_error) + /* Do nothing */; + + /* Leader space */ + if (get_bits(data, 1)) { + dev_dbg(dev, "RC6 - Invalid leader space\n"); + return; + } + + /* Start bit */ + if (get_bits(data, 2) != 0x02) { + dev_dbg(dev, "RC6 - Invalid start bit\n"); + return; + } + + /* Mode */ + mode = get_bits(data, 6); + switch (mode) { + case 0x15: /* 010101 = b000 */ + mode = 0; + break; + case 0x29: /* 101001 = b110 */ + mode = 6; + break; + default: + dev_dbg(dev, "RC6 - Invalid mode\n"); + return; + } + + /* Toggle bit / Submode bit */ + toggle = get_bits(data, 4); + switch (toggle) { + case 0x03: + toggle = 0; + break; + case 0x0C: + toggle = 1; + break; + default: + dev_dbg(dev, "RC6 - Toggle bit error\n"); + break; + } + + /* Customer */ + if (mode == 6) { + if (toggle != 0) { + dev_dbg(dev, "RC6B - Not Supported\n"); + return; + } + + customer = wbcir_rc6cells_to_byte(data); + + if (customer & 0x80) { + /* 15 bit customer value */ + customer <<= 8; + customer |= wbcir_rc6cells_to_byte(data); + } + } + + /* Address */ + address = wbcir_rc6cells_to_byte(data); + if (mode == 6) { + toggle = address >> 7; + address &= 0x7F; + } + + /* Command */ + command = wbcir_rc6cells_to_byte(data); + + /* Create scancode */ + scancode = command; + scancode |= address << 8; + scancode |= customer << 16; + + /* Last sanity check */ + if (data->irdata_error) { + dev_dbg(dev, "RC6 - Cell error(s)\n"); + return; + } + + dev_info(dev, "IR-RC6 ad 0x%02X cm 0x%02X cu 0x%04X " + "toggle %u mode %u scan 0x%08X\n", + address, + command, + customer, + (unsigned int)toggle, + (unsigned int)mode, + scancode); + + wbcir_keydown(data, scancode, toggle); +} + +static void +wbcir_parse_rc5(struct device *dev, struct wbcir_data *data) +{ + /* + * Bits are manchester coded as follows: + * cell1 + cell0 = logic "0" + * cell0 + cell1 = logic "1" + * (i.e. the reverse of RC6) + * + * Start bit 1 - "1" - discarded + * Start bit 2 - Must be inverted to get command bit 6 + * Toggle bit + * Address Bit 4 - 0 + * Command Bit 5 - 0 + */ + u8 toggle; + u8 address; + u8 command; + u32 scancode; + + /* Start bit 1 */ + if (!get_bits(data, 1)) { + dev_dbg(dev, "RC5 - Invalid start bit\n"); + return; + } + + /* Start bit 2 */ + if (!wbcir_get_rc5bits(data, 1)) + command = 0x40; + else + command = 0x00; + + toggle = wbcir_get_rc5bits(data, 1); + address = wbcir_get_rc5bits(data, 5); + command |= wbcir_get_rc5bits(data, 6); + scancode = address << 7 | command; + + /* Last sanity check */ + if (data->irdata_error) { + dev_dbg(dev, "RC5 - Invalid message\n"); + return; + } + + dev_dbg(dev, "IR-RC5 ad %u cm %u t %u s %u\n", + (unsigned int)address, + (unsigned int)command, + (unsigned int)toggle, + (unsigned int)scancode); + + wbcir_keydown(data, scancode, toggle); +} + +static void +wbcir_parse_nec(struct device *dev, struct wbcir_data *data) +{ + /* + * Each bit represents 560 us. + * + * Leader - 9 ms burst + * Gap - 4.5 ms silence + * Address1 bit 0 - 7 - Address 1 + * Address2 bit 0 - 7 - Address 2 + * Command1 bit 0 - 7 - Command 1 + * Command2 bit 0 - 7 - Command 2 + * + * Note the bit order! + * + * With the old NEC protocol, Address2 was the inverse of Address1 + * and Command2 was the inverse of Command1 and were used as + * an error check. + * + * With NEC extended, Address1 is the LSB of the Address and + * Address2 is the MSB, Command parsing remains unchanged. + * + * A repeat message is coded as: + * Leader - 9 ms burst + * Gap - 2.25 ms silence + * Repeat - 560 us active + */ + u8 address1; + u8 address2; + u8 command1; + u8 command2; + u16 address; + u32 scancode; + + /* Leader mark */ + while (get_bits(data, 1) && !data->irdata_error) + /* Do nothing */; + + /* Leader space */ + if (get_bits(data, 4)) { + dev_dbg(dev, "NEC - Invalid leader space\n"); + return; + } + + /* Repeat? */ + if (get_bits(data, 1)) { + if (!data->keypressed) { + dev_dbg(dev, "NEC - Stray repeat message\n"); + return; + } + + dev_dbg(dev, "IR-NEC repeat s %u\n", + (unsigned int)data->last_scancode); + + wbcir_keydown(data, data->last_scancode, data->last_toggle); + return; + } + + /* Remaining leader space */ + if (get_bits(data, 3)) { + dev_dbg(dev, "NEC - Invalid leader space\n"); + return; + } + + address1 = bitrev8(get_bits(data, 8)); + address2 = bitrev8(get_bits(data, 8)); + command1 = bitrev8(get_bits(data, 8)); + command2 = bitrev8(get_bits(data, 8)); + + /* Sanity check */ + if (data->irdata_error) { + dev_dbg(dev, "NEC - Invalid message\n"); + return; + } + + /* Check command validity */ + if (command1 != ~command2) { + dev_dbg(dev, "NEC - Command bytes mismatch\n"); + return; + } + + /* Check for extended NEC protocol */ + address = address1; + if (address1 != ~address2) + address |= address2 << 8; + + scancode = address << 8 | command1; + + dev_dbg(dev, "IR-NEC ad %u cm %u s %u\n", + (unsigned int)address, + (unsigned int)command1, + (unsigned int)scancode); + + wbcir_keydown(data, scancode, !data->last_toggle); +} + + + +/***************************************************************************** + * + * INTERRUPT FUNCTIONS + * + *****************************************************************************/ + +static irqreturn_t +wbcir_irq_handler(int irqno, void *cookie) +{ + struct pnp_dev *device = cookie; + struct wbcir_data *data = pnp_get_drvdata(device); + struct device *dev = &device->dev; + u8 status; + unsigned long flags; + u8 irdata[8]; + int i; + unsigned int hw; + + spin_lock_irqsave(&wbcir_lock, flags); + + wbcir_select_bank(data, WBCIR_BANK_0); + + status = inb(data->sbase + WBCIR_REG_SP3_EIR); + + if (!(status & (WBCIR_IRQ_RX | WBCIR_IRQ_ERR))) { + spin_unlock_irqrestore(&wbcir_lock, flags); + return IRQ_NONE; + } + + if (status & WBCIR_IRQ_ERR) + data->irdata_error = 1; + + if (!(status & WBCIR_IRQ_RX)) + goto out; + + /* Since RXHDLEV is set, at least 8 bytes are in the FIFO */ + insb(data->sbase + WBCIR_REG_SP3_RXDATA, &irdata[0], 8); + + for (i = 0; i < sizeof(irdata); i++) { + hw = hweight8(irdata[i]); + if (hw > 4) + add_irdata_bit(data, 0); + else + add_irdata_bit(data, 1); + + if (hw == 8) + data->idle_count++; + else + data->idle_count = 0; + } + + if (data->idle_count > WBCIR_MAX_IDLE_BYTES) { + /* Set RXINACTIVE... */ + outb(WBCIR_RX_DISABLE, data->sbase + WBCIR_REG_SP3_ASCR); + + /* ...and drain the FIFO */ + while (inb(data->sbase + WBCIR_REG_SP3_LSR) & WBCIR_RX_AVAIL) + inb(data->sbase + WBCIR_REG_SP3_RXDATA); + + dev_dbg(dev, "IRDATA:\n"); + for (i = 0; i < data->irdata_count; i += BITS_PER_LONG) + dev_dbg(dev, "0x%08lX\n", data->irdata[i/BITS_PER_LONG]); + + switch (protocol) { + case IR_PROTOCOL_RC5: + wbcir_parse_rc5(dev, data); + break; + case IR_PROTOCOL_RC6: + wbcir_parse_rc6(dev, data); + break; + case IR_PROTOCOL_NEC: + wbcir_parse_nec(dev, data); + break; + } + + wbcir_reset_irdata(data); + data->idle_count = 0; + } + +out: + spin_unlock_irqrestore(&wbcir_lock, flags); + return IRQ_HANDLED; +} + + + +/***************************************************************************** + * + * SUSPEND/RESUME FUNCTIONS + * + *****************************************************************************/ + +static void +wbcir_shutdown(struct pnp_dev *device) +{ + struct device *dev = &device->dev; + struct wbcir_data *data = pnp_get_drvdata(device); + int do_wake = 1; + u8 match[11]; + u8 mask[11]; + u8 rc6_csl = 0; + int i; + + memset(match, 0, sizeof(match)); + memset(mask, 0, sizeof(mask)); + + if (wake_sc == INVALID_SCANCODE || !device_may_wakeup(dev)) { + do_wake = 0; + goto finish; + } + + switch (protocol) { + case IR_PROTOCOL_RC5: + if (wake_sc > 0xFFF) { + do_wake = 0; + dev_err(dev, "RC5 - Invalid wake scancode\n"); + break; + } + + /* Mask = 13 bits, ex toggle */ + mask[0] = 0xFF; + mask[1] = 0x17; + + match[0] = (wake_sc & 0x003F); /* 6 command bits */ + match[0] |= (wake_sc & 0x0180) >> 1; /* 2 address bits */ + match[1] = (wake_sc & 0x0E00) >> 9; /* 3 address bits */ + if (!(wake_sc & 0x0040)) /* 2nd start bit */ + match[1] |= 0x10; + + break; + + case IR_PROTOCOL_NEC: + if (wake_sc > 0xFFFFFF) { + do_wake = 0; + dev_err(dev, "NEC - Invalid wake scancode\n"); + break; + } + + mask[0] = mask[1] = mask[2] = mask[3] = 0xFF; + + match[1] = bitrev8((wake_sc & 0xFF)); + match[0] = ~match[1]; + + match[3] = bitrev8((wake_sc & 0xFF00) >> 8); + if (wake_sc > 0xFFFF) + match[2] = bitrev8((wake_sc & 0xFF0000) >> 16); + else + match[2] = ~match[3]; + + break; + + case IR_PROTOCOL_RC6: + + if (wake_rc6mode == 0) { + if (wake_sc > 0xFFFF) { + do_wake = 0; + dev_err(dev, "RC6 - Invalid wake scancode\n"); + break; + } + + /* Command */ + match[0] = wbcir_to_rc6cells(wake_sc >> 0); + mask[0] = 0xFF; + match[1] = wbcir_to_rc6cells(wake_sc >> 4); + mask[1] = 0xFF; + + /* Address */ + match[2] = wbcir_to_rc6cells(wake_sc >> 8); + mask[2] = 0xFF; + match[3] = wbcir_to_rc6cells(wake_sc >> 12); + mask[3] = 0xFF; + + /* Header */ + match[4] = 0x50; /* mode1 = mode0 = 0, ignore toggle */ + mask[4] = 0xF0; + match[5] = 0x09; /* start bit = 1, mode2 = 0 */ + mask[5] = 0x0F; + + rc6_csl = 44; + + } else if (wake_rc6mode == 6) { + i = 0; + + /* Command */ + match[i] = wbcir_to_rc6cells(wake_sc >> 0); + mask[i++] = 0xFF; + match[i] = wbcir_to_rc6cells(wake_sc >> 4); + mask[i++] = 0xFF; + + /* Address + Toggle */ + match[i] = wbcir_to_rc6cells(wake_sc >> 8); + mask[i++] = 0xFF; + match[i] = wbcir_to_rc6cells(wake_sc >> 12); + mask[i++] = 0x3F; + + /* Customer bits 7 - 0 */ + match[i] = wbcir_to_rc6cells(wake_sc >> 16); + mask[i++] = 0xFF; + match[i] = wbcir_to_rc6cells(wake_sc >> 20); + mask[i++] = 0xFF; + + if (wake_sc & 0x80000000) { + /* Customer range bit and bits 15 - 8 */ + match[i] = wbcir_to_rc6cells(wake_sc >> 24); + mask[i++] = 0xFF; + match[i] = wbcir_to_rc6cells(wake_sc >> 28); + mask[i++] = 0xFF; + rc6_csl = 76; + } else if (wake_sc <= 0x007FFFFF) { + rc6_csl = 60; + } else { + do_wake = 0; + dev_err(dev, "RC6 - Invalid wake scancode\n"); + break; + } + + /* Header */ + match[i] = 0x93; /* mode1 = mode0 = 1, submode = 0 */ + mask[i++] = 0xFF; + match[i] = 0x0A; /* start bit = 1, mode2 = 1 */ + mask[i++] = 0x0F; + + } else { + do_wake = 0; + dev_err(dev, "RC6 - Invalid wake mode\n"); + } + + break; + + default: + do_wake = 0; + break; + } + +finish: + if (do_wake) { + /* Set compare and compare mask */ + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_INDEX, + WBCIR_REGSEL_COMPARE | WBCIR_REG_ADDR0, + 0x3F); + outsb(data->wbase + WBCIR_REG_WCEIR_DATA, match, 11); + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_INDEX, + WBCIR_REGSEL_MASK | WBCIR_REG_ADDR0, + 0x3F); + outsb(data->wbase + WBCIR_REG_WCEIR_DATA, mask, 11); + + /* RC6 Compare String Len */ + outb(rc6_csl, data->wbase + WBCIR_REG_WCEIR_CSL); + + /* Clear status bits NEC_REP, BUFF, MSG_END, MATCH */ + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_STS, 0x17, 0x17); + + /* Clear BUFF_EN, Clear END_EN, Set MATCH_EN */ + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x01, 0x07); + + /* Set CEIR_EN */ + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CTL, 0x01, 0x01); + + } else { + /* Clear BUFF_EN, Clear END_EN, Clear MATCH_EN */ + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07); + + /* Clear CEIR_EN */ + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CTL, 0x00, 0x01); + } + + /* Disable interrupts */ + outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER); +} + +static int +wbcir_suspend(struct pnp_dev *device, pm_message_t state) +{ + wbcir_shutdown(device); + return 0; +} + +static int +wbcir_resume(struct pnp_dev *device) +{ + struct wbcir_data *data = pnp_get_drvdata(device); + + /* Clear BUFF_EN, Clear END_EN, Clear MATCH_EN */ + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07); + + /* Clear CEIR_EN */ + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CTL, 0x00, 0x01); + + /* Enable interrupts */ + wbcir_reset_irdata(data); + outb(WBCIR_IRQ_RX | WBCIR_IRQ_ERR, data->sbase + WBCIR_REG_SP3_IER); + + return 0; +} + + + +/***************************************************************************** + * + * SETUP/INIT FUNCTIONS + * + *****************************************************************************/ + +static void +wbcir_cfg_ceir(struct wbcir_data *data) +{ + u8 tmp; + + /* Set PROT_SEL, RX_INV, Clear CEIR_EN (needed for the led) */ + tmp = protocol << 4; + if (invert) + tmp |= 0x08; + outb(tmp, data->wbase + WBCIR_REG_WCEIR_CTL); + + /* Clear status bits NEC_REP, BUFF, MSG_END, MATCH */ + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_STS, 0x17, 0x17); + + /* Clear BUFF_EN, Clear END_EN, Clear MATCH_EN */ + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07); + + /* Set RC5 cell time to correspond to 36 kHz */ + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CFG1, 0x4A, 0x7F); + + /* Set IRTX_INV */ + if (invert) + outb(0x04, data->ebase + WBCIR_REG_ECEIR_CCTL); + else + outb(0x00, data->ebase + WBCIR_REG_ECEIR_CCTL); + + /* + * Clear IR LED, set SP3 clock to 24Mhz + * set SP3_IRRX_SW to binary 01, helpfully not documented + */ + outb(0x10, data->ebase + WBCIR_REG_ECEIR_CTS); +} + +static int __devinit +wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id) +{ + struct device *dev = &device->dev; + struct wbcir_data *data; + int err; + + if (!(pnp_port_len(device, 0) == EHFUNC_IOMEM_LEN && + pnp_port_len(device, 1) == WAKEUP_IOMEM_LEN && + pnp_port_len(device, 2) == SP_IOMEM_LEN)) { + dev_err(dev, "Invalid resources\n"); + return -ENODEV; + } + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + pnp_set_drvdata(device, data); + + data->ebase = pnp_port_start(device, 0); + data->wbase = pnp_port_start(device, 1); + data->sbase = pnp_port_start(device, 2); + data->irq = pnp_irq(device, 0); + + if (data->wbase == 0 || data->ebase == 0 || + data->sbase == 0 || data->irq == 0) { + err = -ENODEV; + dev_err(dev, "Invalid resources\n"); + goto exit_free_data; + } + + dev_dbg(&device->dev, "Found device " + "(w: 0x%lX, e: 0x%lX, s: 0x%lX, i: %u)\n", + data->wbase, data->ebase, data->sbase, data->irq); + + if (!request_region(data->wbase, WAKEUP_IOMEM_LEN, DRVNAME)) { + dev_err(dev, "Region 0x%lx-0x%lx already in use!\n", + data->wbase, data->wbase + WAKEUP_IOMEM_LEN - 1); + err = -EBUSY; + goto exit_free_data; + } + + if (!request_region(data->ebase, EHFUNC_IOMEM_LEN, DRVNAME)) { + dev_err(dev, "Region 0x%lx-0x%lx already in use!\n", + data->ebase, data->ebase + EHFUNC_IOMEM_LEN - 1); + err = -EBUSY; + goto exit_release_wbase; + } + + if (!request_region(data->sbase, SP_IOMEM_LEN, DRVNAME)) { + dev_err(dev, "Region 0x%lx-0x%lx already in use!\n", + data->sbase, data->sbase + SP_IOMEM_LEN - 1); + err = -EBUSY; + goto exit_release_ebase; + } + + err = request_irq(data->irq, wbcir_irq_handler, + IRQF_DISABLED, DRVNAME, device); + if (err) { + dev_err(dev, "Failed to claim IRQ %u\n", data->irq); + err = -EBUSY; + goto exit_release_sbase; + } + + led_trigger_register_simple("cir-tx", &data->txtrigger); + if (!data->txtrigger) { + err = -ENOMEM; + goto exit_free_irq; + } + + led_trigger_register_simple("cir-rx", &data->rxtrigger); + if (!data->rxtrigger) { + err = -ENOMEM; + goto exit_unregister_txtrigger; + } + + data->led.name = "cir::activity"; + data->led.default_trigger = "cir-rx"; + data->led.brightness_set = wbcir_led_brightness_set; + data->led.brightness_get = wbcir_led_brightness_get; + err = led_classdev_register(&device->dev, &data->led); + if (err) + goto exit_unregister_rxtrigger; + + data->input_dev = input_allocate_device(); + if (!data->input_dev) { + err = -ENOMEM; + goto exit_unregister_led; + } + + data->input_dev->evbit[0] = BIT(EV_KEY); + data->input_dev->name = WBCIR_NAME; + data->input_dev->phys = "wbcir/cir0"; + data->input_dev->id.bustype = BUS_HOST; + data->input_dev->id.vendor = PCI_VENDOR_ID_WINBOND; + data->input_dev->id.product = WBCIR_ID_FAMILY; + data->input_dev->id.version = WBCIR_ID_CHIP; + data->input_dev->getkeycode = wbcir_getkeycode; + data->input_dev->setkeycode = wbcir_setkeycode; + input_set_capability(data->input_dev, EV_MSC, MSC_SCAN); + input_set_drvdata(data->input_dev, data); + + err = input_register_device(data->input_dev); + if (err) + goto exit_free_input; + + data->last_scancode = INVALID_SCANCODE; + INIT_LIST_HEAD(&data->keytable); + setup_timer(&data->timer_keyup, wbcir_keyup, (unsigned long)data); + + /* Load default keymaps */ + if (protocol == IR_PROTOCOL_RC6) { + int i; + for (i = 0; i < ARRAY_SIZE(rc6_def_keymap); i++) { + err = wbcir_setkeycode(data->input_dev, + (int)rc6_def_keymap[i].scancode, + (int)rc6_def_keymap[i].keycode); + if (err) + goto exit_unregister_keys; + } + } + + device_init_wakeup(&device->dev, 1); + + wbcir_cfg_ceir(data); + + /* Disable interrupts */ + wbcir_select_bank(data, WBCIR_BANK_0); + outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER); + + /* Enable extended mode */ + wbcir_select_bank(data, WBCIR_BANK_2); + outb(WBCIR_EXT_ENABLE, data->sbase + WBCIR_REG_SP3_EXCR1); + + /* + * Configure baud generator, IR data will be sampled at + * a bitrate of: (24Mhz * prescaler) / (divisor * 16). + * + * The ECIR registers include a flag to change the + * 24Mhz clock freq to 48Mhz. + * + * It's not documented in the specs, but fifo levels + * other than 16 seems to be unsupported. + */ + + /* prescaler 1.0, tx/rx fifo lvl 16 */ + outb(0x30, data->sbase + WBCIR_REG_SP3_EXCR2); + + /* Set baud divisor to generate one byte per bit/cell */ + switch (protocol) { + case IR_PROTOCOL_RC5: + outb(0xA7, data->sbase + WBCIR_REG_SP3_BGDL); + break; + case IR_PROTOCOL_RC6: + outb(0x53, data->sbase + WBCIR_REG_SP3_BGDL); + break; + case IR_PROTOCOL_NEC: + outb(0x69, data->sbase + WBCIR_REG_SP3_BGDL); + break; + } + outb(0x00, data->sbase + WBCIR_REG_SP3_BGDH); + + /* Set CEIR mode */ + wbcir_select_bank(data, WBCIR_BANK_0); + outb(0xC0, data->sbase + WBCIR_REG_SP3_MCR); + inb(data->sbase + WBCIR_REG_SP3_LSR); /* Clear LSR */ + inb(data->sbase + WBCIR_REG_SP3_MSR); /* Clear MSR */ + + /* Disable RX demod, run-length encoding/decoding, set freq span */ + wbcir_select_bank(data, WBCIR_BANK_7); + outb(0x10, data->sbase + WBCIR_REG_SP3_RCCFG); + + /* Disable timer */ + wbcir_select_bank(data, WBCIR_BANK_4); + outb(0x00, data->sbase + WBCIR_REG_SP3_IRCR1); + + /* Enable MSR interrupt, Clear AUX_IRX */ + wbcir_select_bank(data, WBCIR_BANK_5); + outb(0x00, data->sbase + WBCIR_REG_SP3_IRCR2); + + /* Disable CRC */ + wbcir_select_bank(data, WBCIR_BANK_6); + outb(0x20, data->sbase + WBCIR_REG_SP3_IRCR3); + + /* Set RX/TX (de)modulation freq, not really used */ + wbcir_select_bank(data, WBCIR_BANK_7); + outb(0xF2, data->sbase + WBCIR_REG_SP3_IRRXDC); + outb(0x69, data->sbase + WBCIR_REG_SP3_IRTXMC); + + /* Set invert and pin direction */ + if (invert) + outb(0x10, data->sbase + WBCIR_REG_SP3_IRCFG4); + else + outb(0x00, data->sbase + WBCIR_REG_SP3_IRCFG4); + + /* Set FIFO thresholds (RX = 8, TX = 3), reset RX/TX */ + wbcir_select_bank(data, WBCIR_BANK_0); + outb(0x97, data->sbase + WBCIR_REG_SP3_FCR); + + /* Clear AUX status bits */ + outb(0xE0, data->sbase + WBCIR_REG_SP3_ASCR); + + /* Enable interrupts */ + outb(WBCIR_IRQ_RX | WBCIR_IRQ_ERR, data->sbase + WBCIR_REG_SP3_IER); + + return 0; + +exit_unregister_keys: + if (!list_empty(&data->keytable)) { + struct wbcir_keyentry *key; + struct wbcir_keyentry *keytmp; + + list_for_each_entry_safe(key, keytmp, &data->keytable, list) { + list_del(&key->list); + kfree(key); + } + } + input_unregister_device(data->input_dev); + /* Can't call input_free_device on an unregistered device */ + data->input_dev = NULL; +exit_free_input: + input_free_device(data->input_dev); +exit_unregister_led: + led_classdev_unregister(&data->led); +exit_unregister_rxtrigger: + led_trigger_unregister_simple(data->rxtrigger); +exit_unregister_txtrigger: + led_trigger_unregister_simple(data->txtrigger); +exit_free_irq: + free_irq(data->irq, device); +exit_release_sbase: + release_region(data->sbase, SP_IOMEM_LEN); +exit_release_ebase: + release_region(data->ebase, EHFUNC_IOMEM_LEN); +exit_release_wbase: + release_region(data->wbase, WAKEUP_IOMEM_LEN); +exit_free_data: + kfree(data); + pnp_set_drvdata(device, NULL); +exit: + return err; +} + +static void __devexit +wbcir_remove(struct pnp_dev *device) +{ + struct wbcir_data *data = pnp_get_drvdata(device); + struct wbcir_keyentry *key; + struct wbcir_keyentry *keytmp; + + /* Disable interrupts */ + wbcir_select_bank(data, WBCIR_BANK_0); + outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER); + + del_timer_sync(&data->timer_keyup); + + free_irq(data->irq, device); + + /* Clear status bits NEC_REP, BUFF, MSG_END, MATCH */ + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_STS, 0x17, 0x17); + + /* Clear CEIR_EN */ + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CTL, 0x00, 0x01); + + /* Clear BUFF_EN, END_EN, MATCH_EN */ + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07); + + /* This will generate a keyup event if necessary */ + input_unregister_device(data->input_dev); + + led_trigger_unregister_simple(data->rxtrigger); + led_trigger_unregister_simple(data->txtrigger); + led_classdev_unregister(&data->led); + + /* This is ok since &data->led isn't actually used */ + wbcir_led_brightness_set(&data->led, LED_OFF); + + release_region(data->wbase, WAKEUP_IOMEM_LEN); + release_region(data->ebase, EHFUNC_IOMEM_LEN); + release_region(data->sbase, SP_IOMEM_LEN); + + list_for_each_entry_safe(key, keytmp, &data->keytable, list) { + list_del(&key->list); + kfree(key); + } + + kfree(data); + + pnp_set_drvdata(device, NULL); +} + +static const struct pnp_device_id wbcir_ids[] = { + { "WEC1022", 0 }, + { "", 0 } +}; +MODULE_DEVICE_TABLE(pnp, wbcir_ids); + +static struct pnp_driver wbcir_driver = { + .name = WBCIR_NAME, + .id_table = wbcir_ids, + .probe = wbcir_probe, + .remove = __devexit_p(wbcir_remove), + .suspend = wbcir_suspend, + .resume = wbcir_resume, + .shutdown = wbcir_shutdown +}; + +static int __init +wbcir_init(void) +{ + int ret; + + switch (protocol) { + case IR_PROTOCOL_RC5: + case IR_PROTOCOL_NEC: + case IR_PROTOCOL_RC6: + break; + default: + printk(KERN_ERR DRVNAME ": Invalid protocol argument\n"); + return -EINVAL; + } + + ret = pnp_register_driver(&wbcir_driver); + if (ret) + printk(KERN_ERR DRVNAME ": Unable to register driver\n"); + + return ret; +} + +static void __exit +wbcir_exit(void) +{ + pnp_unregister_driver(&wbcir_driver); +} + +MODULE_AUTHOR("David Härdeman <david@hardeman.nu>"); +MODULE_DESCRIPTION("Winbond SuperI/O Consumer IR Driver"); +MODULE_LICENSE("GPL"); + +module_init(wbcir_init); +module_exit(wbcir_exit); + + diff --git a/drivers/input/misc/wm831x-on.c b/drivers/input/misc/wm831x-on.c new file mode 100644 index 00000000000..ba4f5dd7c60 --- /dev/null +++ b/drivers/input/misc/wm831x-on.c @@ -0,0 +1,163 @@ +/** + * wm831x-on.c - WM831X ON pin driver + * + * Copyright (C) 2009 Wolfson Microelectronics plc + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/workqueue.h> +#include <linux/mfd/wm831x/core.h> + +struct wm831x_on { + struct input_dev *dev; + struct delayed_work work; + struct wm831x *wm831x; +}; + +/* + * The chip gives us an interrupt when the ON pin is asserted but we + * then need to poll to see when the pin is deasserted. + */ +static void wm831x_poll_on(struct work_struct *work) +{ + struct wm831x_on *wm831x_on = container_of(work, struct wm831x_on, + work.work); + struct wm831x *wm831x = wm831x_on->wm831x; + int poll, ret; + + ret = wm831x_reg_read(wm831x, WM831X_ON_PIN_CONTROL); + if (ret >= 0) { + poll = !(ret & WM831X_ON_PIN_STS); + + input_report_key(wm831x_on->dev, KEY_POWER, poll); + input_sync(wm831x_on->dev); + } else { + dev_err(wm831x->dev, "Failed to read ON status: %d\n", ret); + poll = 1; + } + + if (poll) + schedule_delayed_work(&wm831x_on->work, 100); +} + +static irqreturn_t wm831x_on_irq(int irq, void *data) +{ + struct wm831x_on *wm831x_on = data; + + schedule_delayed_work(&wm831x_on->work, 0); + + return IRQ_HANDLED; +} + +static int __devinit wm831x_on_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_on *wm831x_on; + int irq = platform_get_irq(pdev, 0); + int ret; + + wm831x_on = kzalloc(sizeof(struct wm831x_on), GFP_KERNEL); + if (!wm831x_on) { + dev_err(&pdev->dev, "Can't allocate data\n"); + return -ENOMEM; + } + + wm831x_on->wm831x = wm831x; + INIT_DELAYED_WORK(&wm831x_on->work, wm831x_poll_on); + + wm831x_on->dev = input_allocate_device(); + if (!wm831x_on->dev) { + dev_err(&pdev->dev, "Can't allocate input dev\n"); + ret = -ENOMEM; + goto err; + } + + wm831x_on->dev->evbit[0] = BIT_MASK(EV_KEY); + wm831x_on->dev->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER); + wm831x_on->dev->name = "wm831x_on"; + wm831x_on->dev->phys = "wm831x_on/input0"; + wm831x_on->dev->dev.parent = &pdev->dev; + + ret = wm831x_request_irq(wm831x, irq, wm831x_on_irq, + IRQF_TRIGGER_RISING, "wm831x_on", wm831x_on); + if (ret < 0) { + dev_err(&pdev->dev, "Unable to request IRQ: %d\n", ret); + goto err_input_dev; + } + ret = input_register_device(wm831x_on->dev); + if (ret) { + dev_dbg(&pdev->dev, "Can't register input device: %d\n", ret); + goto err_irq; + } + + platform_set_drvdata(pdev, wm831x_on); + + return 0; + +err_irq: + wm831x_free_irq(wm831x, irq, NULL); +err_input_dev: + input_free_device(wm831x_on->dev); +err: + kfree(wm831x_on); + return ret; +} + +static int __devexit wm831x_on_remove(struct platform_device *pdev) +{ + struct wm831x_on *wm831x_on = platform_get_drvdata(pdev); + int irq = platform_get_irq(pdev, 0); + + wm831x_free_irq(wm831x_on->wm831x, irq, wm831x_on); + cancel_delayed_work_sync(&wm831x_on->work); + input_unregister_device(wm831x_on->dev); + kfree(wm831x_on); + + return 0; +} + +static struct platform_driver wm831x_on_driver = { + .probe = wm831x_on_probe, + .remove = __devexit_p(wm831x_on_remove), + .driver = { + .name = "wm831x-on", + .owner = THIS_MODULE, + }, +}; + +static int __init wm831x_on_init(void) +{ + return platform_driver_register(&wm831x_on_driver); +} +module_init(wm831x_on_init); + +static void __exit wm831x_on_exit(void) +{ + platform_driver_unregister(&wm831x_on_driver); +} +module_exit(wm831x_on_exit); + +MODULE_ALIAS("platform:wm831x-on"); +MODULE_DESCRIPTION("WM831x ON pin"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); + diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c index 84e2fc04d11..f84cbd97c88 100644 --- a/drivers/input/mouse/sentelic.c +++ b/drivers/input/mouse/sentelic.c @@ -92,7 +92,8 @@ static int fsp_reg_read(struct psmouse *psmouse, int reg_addr, int *reg_val) */ ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE); psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); - mutex_lock(&ps2dev->cmd_mutex); + + ps2_begin_command(ps2dev); if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0) goto out; @@ -126,7 +127,7 @@ static int fsp_reg_read(struct psmouse *psmouse, int reg_addr, int *reg_val) rc = 0; out: - mutex_unlock(&ps2dev->cmd_mutex); + ps2_end_command(ps2dev); ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE); psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); dev_dbg(&ps2dev->serio->dev, "READ REG: 0x%02x is 0x%02x (rc = %d)\n", @@ -140,7 +141,7 @@ static int fsp_reg_write(struct psmouse *psmouse, int reg_addr, int reg_val) unsigned char v; int rc = -1; - mutex_lock(&ps2dev->cmd_mutex); + ps2_begin_command(ps2dev); if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0) goto out; @@ -179,7 +180,7 @@ static int fsp_reg_write(struct psmouse *psmouse, int reg_addr, int reg_val) rc = 0; out: - mutex_unlock(&ps2dev->cmd_mutex); + ps2_end_command(ps2dev); dev_dbg(&ps2dev->serio->dev, "WRITE REG: 0x%02x to 0x%02x (rc = %d)\n", reg_addr, reg_val, rc); return rc; @@ -214,7 +215,8 @@ static int fsp_page_reg_read(struct psmouse *psmouse, int *reg_val) ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE); psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); - mutex_lock(&ps2dev->cmd_mutex); + + ps2_begin_command(ps2dev); if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0) goto out; @@ -236,7 +238,7 @@ static int fsp_page_reg_read(struct psmouse *psmouse, int *reg_val) rc = 0; out: - mutex_unlock(&ps2dev->cmd_mutex); + ps2_end_command(ps2dev); ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE); psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); dev_dbg(&ps2dev->serio->dev, "READ PAGE REG: 0x%02x (rc = %d)\n", @@ -250,7 +252,7 @@ static int fsp_page_reg_write(struct psmouse *psmouse, int reg_val) unsigned char v; int rc = -1; - mutex_lock(&ps2dev->cmd_mutex); + ps2_begin_command(ps2dev); if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0) goto out; @@ -275,7 +277,7 @@ static int fsp_page_reg_write(struct psmouse *psmouse, int reg_val) rc = 0; out: - mutex_unlock(&ps2dev->cmd_mutex); + ps2_end_command(ps2dev); dev_dbg(&ps2dev->serio->dev, "WRITE PAGE REG: to 0x%02x (rc = %d)\n", reg_val, rc); return rc; diff --git a/drivers/input/mouse/synaptics_i2c.c b/drivers/input/mouse/synaptics_i2c.c index eac9fdde7ee..7283c78044a 100644 --- a/drivers/input/mouse/synaptics_i2c.c +++ b/drivers/input/mouse/synaptics_i2c.c @@ -203,7 +203,7 @@ MODULE_PARM_DESC(no_filter, "No Filter. Default = 0 (off)"); * and the irq configuration should be set to Falling Edge Trigger */ /* Control IRQ / Polling option */ -static int polling_req; +static bool polling_req; module_param(polling_req, bool, 0444); MODULE_PARM_DESC(polling_req, "Request Polling. Default = 0 (use irq)"); @@ -217,6 +217,7 @@ struct synaptics_i2c { struct i2c_client *client; struct input_dev *input; struct delayed_work dwork; + spinlock_t lock; int no_data_count; int no_decel_param; int reduce_report_param; @@ -366,17 +367,28 @@ static bool synaptics_i2c_get_input(struct synaptics_i2c *touch) return xy_delta || gesture; } -static irqreturn_t synaptics_i2c_irq(int irq, void *dev_id) +static void synaptics_i2c_reschedule_work(struct synaptics_i2c *touch, + unsigned long delay) { - struct synaptics_i2c *touch = dev_id; + unsigned long flags; + + spin_lock_irqsave(&touch->lock, flags); /* - * We want to have the work run immediately but it might have - * already been scheduled with a delay, that's why we have to - * cancel it first. + * If work is already scheduled then subsequent schedules will not + * change the scheduled time that's why we have to cancel it first. */ - cancel_delayed_work(&touch->dwork); - schedule_delayed_work(&touch->dwork, 0); + __cancel_delayed_work(&touch->dwork); + schedule_delayed_work(&touch->dwork, delay); + + spin_unlock_irqrestore(&touch->lock, flags); +} + +static irqreturn_t synaptics_i2c_irq(int irq, void *dev_id) +{ + struct synaptics_i2c *touch = dev_id; + + synaptics_i2c_reschedule_work(touch, 0); return IRQ_HANDLED; } @@ -452,7 +464,7 @@ static void synaptics_i2c_work_handler(struct work_struct *work) * We poll the device once in THREAD_IRQ_SLEEP_SECS and * if error is detected, we try to reset and reconfigure the touchpad. */ - schedule_delayed_work(&touch->dwork, delay); + synaptics_i2c_reschedule_work(touch, delay); } static int synaptics_i2c_open(struct input_dev *input) @@ -465,8 +477,8 @@ static int synaptics_i2c_open(struct input_dev *input) return ret; if (polling_req) - schedule_delayed_work(&touch->dwork, - msecs_to_jiffies(NO_DATA_SLEEP_MSECS)); + synaptics_i2c_reschedule_work(touch, + msecs_to_jiffies(NO_DATA_SLEEP_MSECS)); return 0; } @@ -521,6 +533,7 @@ struct synaptics_i2c *synaptics_i2c_touch_create(struct i2c_client *client) touch->scan_rate_param = scan_rate; set_scan_rate(touch, scan_rate); INIT_DELAYED_WORK(&touch->dwork, synaptics_i2c_work_handler); + spin_lock_init(&touch->lock); return touch; } @@ -535,14 +548,12 @@ static int __devinit synaptics_i2c_probe(struct i2c_client *client, if (!touch) return -ENOMEM; - i2c_set_clientdata(client, touch); - ret = synaptics_i2c_reset_config(client); if (ret) goto err_mem_free; if (client->irq < 1) - polling_req = 1; + polling_req = true; touch->input = input_allocate_device(); if (!touch->input) { @@ -563,7 +574,7 @@ static int __devinit synaptics_i2c_probe(struct i2c_client *client, dev_warn(&touch->client->dev, "IRQ request failed: %d, " "falling back to polling\n", ret); - polling_req = 1; + polling_req = true; synaptics_i2c_reg_set(touch->client, INTERRUPT_EN_REG, 0); } @@ -580,12 +591,14 @@ static int __devinit synaptics_i2c_probe(struct i2c_client *client, "Input device register failed: %d\n", ret); goto err_input_free; } + + i2c_set_clientdata(client, touch); + return 0; err_input_free: input_free_device(touch->input); err_mem_free: - i2c_set_clientdata(client, NULL); kfree(touch); return ret; @@ -596,7 +609,7 @@ static int __devexit synaptics_i2c_remove(struct i2c_client *client) struct synaptics_i2c *touch = i2c_get_clientdata(client); if (!polling_req) - free_irq(touch->client->irq, touch); + free_irq(client->irq, touch); input_unregister_device(touch->input); i2c_set_clientdata(client, NULL); @@ -627,8 +640,8 @@ static int synaptics_i2c_resume(struct i2c_client *client) if (ret) return ret; - schedule_delayed_work(&touch->dwork, - msecs_to_jiffies(NO_DATA_SLEEP_MSECS)); + synaptics_i2c_reschedule_work(touch, + msecs_to_jiffies(NO_DATA_SLEEP_MSECS)); return 0; } diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index eb3ff94af58..bc56e52b945 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -87,8 +87,22 @@ static bool i8042_bypass_aux_irq_test; #include "i8042.h" +/* + * i8042_lock protects serialization between i8042_command and + * the interrupt handler. + */ static DEFINE_SPINLOCK(i8042_lock); +/* + * Writers to AUX and KBD ports as well as users issuing i8042_command + * directly should acquire i8042_mutex (by means of calling + * i8042_lock_chip() and i8042_unlock_ship() helpers) to ensure that + * they do not disturb each other (unfortunately in many i8042 + * implementations write to one of the ports will immediately abort + * command that is being processed by another port). + */ +static DEFINE_MUTEX(i8042_mutex); + struct i8042_port { struct serio *serio; int irq; @@ -113,6 +127,18 @@ static struct platform_device *i8042_platform_device; static irqreturn_t i8042_interrupt(int irq, void *dev_id); +void i8042_lock_chip(void) +{ + mutex_lock(&i8042_mutex); +} +EXPORT_SYMBOL(i8042_lock_chip); + +void i8042_unlock_chip(void) +{ + mutex_unlock(&i8042_mutex); +} +EXPORT_SYMBOL(i8042_unlock_chip); + /* * The i8042_wait_read() and i8042_wait_write functions wait for the i8042 to * be ready for reading values from it / writing values to it. @@ -1161,6 +1187,21 @@ static void __devexit i8042_unregister_ports(void) } } +/* + * Checks whether port belongs to i8042 controller. + */ +bool i8042_check_port_owner(const struct serio *port) +{ + int i; + + for (i = 0; i < I8042_NUM_PORTS; i++) + if (i8042_ports[i].serio == port) + return true; + + return false; +} +EXPORT_SYMBOL(i8042_check_port_owner); + static void i8042_free_irqs(void) { if (i8042_aux_irq_registered) diff --git a/drivers/input/serio/libps2.c b/drivers/input/serio/libps2.c index 3a95b508bf2..769ba65a585 100644 --- a/drivers/input/serio/libps2.c +++ b/drivers/input/serio/libps2.c @@ -17,6 +17,7 @@ #include <linux/interrupt.h> #include <linux/input.h> #include <linux/serio.h> +#include <linux/i8042.h> #include <linux/init.h> #include <linux/libps2.h> @@ -54,6 +55,24 @@ int ps2_sendbyte(struct ps2dev *ps2dev, unsigned char byte, int timeout) } EXPORT_SYMBOL(ps2_sendbyte); +void ps2_begin_command(struct ps2dev *ps2dev) +{ + mutex_lock(&ps2dev->cmd_mutex); + + if (i8042_check_port_owner(ps2dev->serio)) + i8042_lock_chip(); +} +EXPORT_SYMBOL(ps2_begin_command); + +void ps2_end_command(struct ps2dev *ps2dev) +{ + if (i8042_check_port_owner(ps2dev->serio)) + i8042_unlock_chip(); + + mutex_unlock(&ps2dev->cmd_mutex); +} +EXPORT_SYMBOL(ps2_end_command); + /* * ps2_drain() waits for device to transmit requested number of bytes * and discards them. @@ -66,7 +85,7 @@ void ps2_drain(struct ps2dev *ps2dev, int maxbytes, int timeout) maxbytes = sizeof(ps2dev->cmdbuf); } - mutex_lock(&ps2dev->cmd_mutex); + ps2_begin_command(ps2dev); serio_pause_rx(ps2dev->serio); ps2dev->flags = PS2_FLAG_CMD; @@ -76,7 +95,8 @@ void ps2_drain(struct ps2dev *ps2dev, int maxbytes, int timeout) wait_event_timeout(ps2dev->wait, !(ps2dev->flags & PS2_FLAG_CMD), msecs_to_jiffies(timeout)); - mutex_unlock(&ps2dev->cmd_mutex); + + ps2_end_command(ps2dev); } EXPORT_SYMBOL(ps2_drain); @@ -237,9 +257,9 @@ int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command) { int rc; - mutex_lock(&ps2dev->cmd_mutex); + ps2_begin_command(ps2dev); rc = __ps2_command(ps2dev, param, command); - mutex_unlock(&ps2dev->cmd_mutex); + ps2_end_command(ps2dev); return rc; } diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 87a1ae63bcc..8cc453c85ea 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -48,8 +48,8 @@ config TOUCHSCREEN_AD7879_I2C select TOUCHSCREEN_AD7879 help Say Y here if you have a touchscreen interface using the - AD7879-1 controller, and your board-specific initialization - code includes that in its table of I2C devices. + AD7879-1/AD7889-1 controller, and your board-specific + initialization code includes that in its table of I2C devices. If unsure, say N (but it's safe to say "Y"). @@ -62,7 +62,7 @@ config TOUCHSCREEN_AD7879_SPI select TOUCHSCREEN_AD7879 help Say Y here if you have a touchscreen interface using the - AD7879 controller, and your board-specific initialization + AD7879/AD7889 controller, and your board-specific initialization code includes that in its table of SPI devices. If unsure, say N (but it's safe to say "Y"). @@ -169,6 +169,17 @@ config TOUCHSCREEN_WACOM_W8001 To compile this driver as a module, choose M here: the module will be called wacom_w8001. +config TOUCHSCREEN_MCS5000 + tristate "MELFAS MCS-5000 touchscreen" + depends on I2C + help + Say Y here if you have the MELFAS MCS-5000 touchscreen controller + chip in your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called mcs5000_ts. config TOUCHSCREEN_MTOUCH tristate "MicroTouch serial touchscreens" @@ -510,4 +521,13 @@ config TOUCHSCREEN_W90X900 To compile this driver as a module, choose M here: the module will be called w90p910_ts. +config TOUCHSCREEN_PCAP + tristate "Motorola PCAP touchscreen" + depends on EZX_PCAP + help + Say Y here if you have a Motorola EZX telephone and + want to enable support for the built-in touchscreen. + + To compile this driver as a module, choose M here: the + module will be called pcap_ts. endif diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 3e1c5e0b952..15fa62cffc7 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o +obj-$(CONFIG_TOUCHSCREEN_MCS5000) += mcs5000_ts.o obj-$(CONFIG_TOUCHSCREEN_MIGOR) += migor_ts.o obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o obj-$(CONFIG_TOUCHSCREEN_MK712) += mk712.o @@ -40,3 +41,4 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_ATMEL) += atmel-wm97xx.o obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o +obj-$(CONFIG_TOUCHSCREEN_PCAP) += pcap_ts.o diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c index ecaeb7e8e75..eb83939c705 100644 --- a/drivers/input/touchscreen/ad7877.c +++ b/drivers/input/touchscreen/ad7877.c @@ -842,3 +842,4 @@ module_exit(ad7877_exit); MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); MODULE_DESCRIPTION("AD7877 touchscreen Driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("spi:ad7877"); diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c index 5d8a7039880..f06332c9e21 100644 --- a/drivers/input/touchscreen/ad7879.c +++ b/drivers/input/touchscreen/ad7879.c @@ -1,7 +1,8 @@ /* - * Copyright (C) 2008 Michael Hennerich, Analog Devices Inc. + * Copyright (C) 2008-2009 Michael Hennerich, Analog Devices Inc. * - * Description: AD7879 based touchscreen, and GPIO driver (I2C/SPI Interface) + * Description: AD7879/AD7889 based touchscreen, and GPIO driver + * (I2C/SPI Interface) * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * @@ -747,6 +748,7 @@ static int __devexit ad7879_remove(struct i2c_client *client) static const struct i2c_device_id ad7879_id[] = { { "ad7879", 0 }, + { "ad7889", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, ad7879_id); @@ -779,3 +781,4 @@ module_exit(ad7879_exit); MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); MODULE_DESCRIPTION("AD7879(-1) touchscreen Driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("spi:ad7879"); diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index ba9d38c3f41..09c810999b9 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -1256,3 +1256,4 @@ module_exit(ads7846_exit); MODULE_DESCRIPTION("ADS7846 TouchScreen Driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("spi:ads7846"); diff --git a/drivers/input/touchscreen/mcs5000_ts.c b/drivers/input/touchscreen/mcs5000_ts.c new file mode 100644 index 00000000000..4c28b89757f --- /dev/null +++ b/drivers/input/touchscreen/mcs5000_ts.c @@ -0,0 +1,318 @@ +/* + * mcs5000_ts.c - Touchscreen driver for MELFAS MCS-5000 controller + * + * Copyright (C) 2009 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim <jy0922.shim@samsung.com> + * + * Based on wm97xx-core.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/i2c/mcs5000_ts.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/irq.h> + +/* Registers */ +#define MCS5000_TS_STATUS 0x00 +#define STATUS_OFFSET 0 +#define STATUS_NO (0 << STATUS_OFFSET) +#define STATUS_INIT (1 << STATUS_OFFSET) +#define STATUS_SENSING (2 << STATUS_OFFSET) +#define STATUS_COORD (3 << STATUS_OFFSET) +#define STATUS_GESTURE (4 << STATUS_OFFSET) +#define ERROR_OFFSET 4 +#define ERROR_NO (0 << ERROR_OFFSET) +#define ERROR_POWER_ON_RESET (1 << ERROR_OFFSET) +#define ERROR_INT_RESET (2 << ERROR_OFFSET) +#define ERROR_EXT_RESET (3 << ERROR_OFFSET) +#define ERROR_INVALID_REG_ADDRESS (8 << ERROR_OFFSET) +#define ERROR_INVALID_REG_VALUE (9 << ERROR_OFFSET) + +#define MCS5000_TS_OP_MODE 0x01 +#define RESET_OFFSET 0 +#define RESET_NO (0 << RESET_OFFSET) +#define RESET_EXT_SOFT (1 << RESET_OFFSET) +#define OP_MODE_OFFSET 1 +#define OP_MODE_SLEEP (0 << OP_MODE_OFFSET) +#define OP_MODE_ACTIVE (1 << OP_MODE_OFFSET) +#define GESTURE_OFFSET 4 +#define GESTURE_DISABLE (0 << GESTURE_OFFSET) +#define GESTURE_ENABLE (1 << GESTURE_OFFSET) +#define PROXIMITY_OFFSET 5 +#define PROXIMITY_DISABLE (0 << PROXIMITY_OFFSET) +#define PROXIMITY_ENABLE (1 << PROXIMITY_OFFSET) +#define SCAN_MODE_OFFSET 6 +#define SCAN_MODE_INTERRUPT (0 << SCAN_MODE_OFFSET) +#define SCAN_MODE_POLLING (1 << SCAN_MODE_OFFSET) +#define REPORT_RATE_OFFSET 7 +#define REPORT_RATE_40 (0 << REPORT_RATE_OFFSET) +#define REPORT_RATE_80 (1 << REPORT_RATE_OFFSET) + +#define MCS5000_TS_SENS_CTL 0x02 +#define MCS5000_TS_FILTER_CTL 0x03 +#define PRI_FILTER_OFFSET 0 +#define SEC_FILTER_OFFSET 4 + +#define MCS5000_TS_X_SIZE_UPPER 0x08 +#define MCS5000_TS_X_SIZE_LOWER 0x09 +#define MCS5000_TS_Y_SIZE_UPPER 0x0A +#define MCS5000_TS_Y_SIZE_LOWER 0x0B + +#define MCS5000_TS_INPUT_INFO 0x10 +#define INPUT_TYPE_OFFSET 0 +#define INPUT_TYPE_NONTOUCH (0 << INPUT_TYPE_OFFSET) +#define INPUT_TYPE_SINGLE (1 << INPUT_TYPE_OFFSET) +#define INPUT_TYPE_DUAL (2 << INPUT_TYPE_OFFSET) +#define INPUT_TYPE_PALM (3 << INPUT_TYPE_OFFSET) +#define INPUT_TYPE_PROXIMITY (7 << INPUT_TYPE_OFFSET) +#define GESTURE_CODE_OFFSET 3 +#define GESTURE_CODE_NO (0 << GESTURE_CODE_OFFSET) + +#define MCS5000_TS_X_POS_UPPER 0x11 +#define MCS5000_TS_X_POS_LOWER 0x12 +#define MCS5000_TS_Y_POS_UPPER 0x13 +#define MCS5000_TS_Y_POS_LOWER 0x14 +#define MCS5000_TS_Z_POS 0x15 +#define MCS5000_TS_WIDTH 0x16 +#define MCS5000_TS_GESTURE_VAL 0x17 +#define MCS5000_TS_MODULE_REV 0x20 +#define MCS5000_TS_FIRMWARE_VER 0x21 + +/* Touchscreen absolute values */ +#define MCS5000_MAX_XC 0x3ff +#define MCS5000_MAX_YC 0x3ff + +enum mcs5000_ts_read_offset { + READ_INPUT_INFO, + READ_X_POS_UPPER, + READ_X_POS_LOWER, + READ_Y_POS_UPPER, + READ_Y_POS_LOWER, + READ_BLOCK_SIZE, +}; + +/* Each client has this additional data */ +struct mcs5000_ts_data { + struct i2c_client *client; + struct input_dev *input_dev; + const struct mcs5000_ts_platform_data *platform_data; +}; + +static irqreturn_t mcs5000_ts_interrupt(int irq, void *dev_id) +{ + struct mcs5000_ts_data *data = dev_id; + struct i2c_client *client = data->client; + u8 buffer[READ_BLOCK_SIZE]; + int err; + int x; + int y; + + err = i2c_smbus_read_i2c_block_data(client, MCS5000_TS_INPUT_INFO, + READ_BLOCK_SIZE, buffer); + if (err < 0) { + dev_err(&client->dev, "%s, err[%d]\n", __func__, err); + goto out; + } + + switch (buffer[READ_INPUT_INFO]) { + case INPUT_TYPE_NONTOUCH: + input_report_key(data->input_dev, BTN_TOUCH, 0); + input_sync(data->input_dev); + break; + + case INPUT_TYPE_SINGLE: + x = (buffer[READ_X_POS_UPPER] << 8) | buffer[READ_X_POS_LOWER]; + y = (buffer[READ_Y_POS_UPPER] << 8) | buffer[READ_Y_POS_LOWER]; + + input_report_key(data->input_dev, BTN_TOUCH, 1); + input_report_abs(data->input_dev, ABS_X, x); + input_report_abs(data->input_dev, ABS_Y, y); + input_sync(data->input_dev); + break; + + case INPUT_TYPE_DUAL: + /* TODO */ + break; + + case INPUT_TYPE_PALM: + /* TODO */ + break; + + case INPUT_TYPE_PROXIMITY: + /* TODO */ + break; + + default: + dev_err(&client->dev, "Unknown ts input type %d\n", + buffer[READ_INPUT_INFO]); + break; + } + + out: + return IRQ_HANDLED; +} + +static void mcs5000_ts_phys_init(struct mcs5000_ts_data *data) +{ + const struct mcs5000_ts_platform_data *platform_data = + data->platform_data; + struct i2c_client *client = data->client; + + /* Touch reset & sleep mode */ + i2c_smbus_write_byte_data(client, MCS5000_TS_OP_MODE, + RESET_EXT_SOFT | OP_MODE_SLEEP); + + /* Touch size */ + i2c_smbus_write_byte_data(client, MCS5000_TS_X_SIZE_UPPER, + platform_data->x_size >> 8); + i2c_smbus_write_byte_data(client, MCS5000_TS_X_SIZE_LOWER, + platform_data->x_size & 0xff); + i2c_smbus_write_byte_data(client, MCS5000_TS_Y_SIZE_UPPER, + platform_data->y_size >> 8); + i2c_smbus_write_byte_data(client, MCS5000_TS_Y_SIZE_LOWER, + platform_data->y_size & 0xff); + + /* Touch active mode & 80 report rate */ + i2c_smbus_write_byte_data(data->client, MCS5000_TS_OP_MODE, + OP_MODE_ACTIVE | REPORT_RATE_80); +} + +static int __devinit mcs5000_ts_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct mcs5000_ts_data *data; + struct input_dev *input_dev; + int ret; + + if (!client->dev.platform_data) + return -EINVAL; + + data = kzalloc(sizeof(struct mcs5000_ts_data), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!data || !input_dev) { + dev_err(&client->dev, "Failed to allocate memory\n"); + ret = -ENOMEM; + goto err_free_mem; + } + + data->client = client; + data->input_dev = input_dev; + data->platform_data = client->dev.platform_data; + + input_dev->name = "MELPAS MCS-5000 Touchscreen"; + input_dev->id.bustype = BUS_I2C; + input_dev->dev.parent = &client->dev; + + __set_bit(EV_ABS, input_dev->evbit); + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(BTN_TOUCH, input_dev->keybit); + input_set_abs_params(input_dev, ABS_X, 0, MCS5000_MAX_XC, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, MCS5000_MAX_YC, 0, 0); + + input_set_drvdata(input_dev, data); + + if (data->platform_data->cfg_pin) + data->platform_data->cfg_pin(); + + ret = request_threaded_irq(client->irq, NULL, mcs5000_ts_interrupt, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, "mcs5000_ts", data); + + if (ret < 0) { + dev_err(&client->dev, "Failed to register interrupt\n"); + goto err_free_mem; + } + + ret = input_register_device(data->input_dev); + if (ret < 0) + goto err_free_irq; + + mcs5000_ts_phys_init(data); + i2c_set_clientdata(client, data); + + return 0; + +err_free_irq: + free_irq(client->irq, data); +err_free_mem: + input_free_device(input_dev); + kfree(data); + return ret; +} + +static int __devexit mcs5000_ts_remove(struct i2c_client *client) +{ + struct mcs5000_ts_data *data = i2c_get_clientdata(client); + + free_irq(client->irq, data); + input_unregister_device(data->input_dev); + kfree(data); + i2c_set_clientdata(client, NULL); + + return 0; +} + +#ifdef CONFIG_PM +static int mcs5000_ts_suspend(struct i2c_client *client, pm_message_t mesg) +{ + /* Touch sleep mode */ + i2c_smbus_write_byte_data(client, MCS5000_TS_OP_MODE, OP_MODE_SLEEP); + + return 0; +} + +static int mcs5000_ts_resume(struct i2c_client *client) +{ + struct mcs5000_ts_data *data = i2c_get_clientdata(client); + + mcs5000_ts_phys_init(data); + + return 0; +} +#else +#define mcs5000_ts_suspend NULL +#define mcs5000_ts_resume NULL +#endif + +static const struct i2c_device_id mcs5000_ts_id[] = { + { "mcs5000_ts", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mcs5000_ts_id); + +static struct i2c_driver mcs5000_ts_driver = { + .probe = mcs5000_ts_probe, + .remove = __devexit_p(mcs5000_ts_remove), + .suspend = mcs5000_ts_suspend, + .resume = mcs5000_ts_resume, + .driver = { + .name = "mcs5000_ts", + }, + .id_table = mcs5000_ts_id, +}; + +static int __init mcs5000_ts_init(void) +{ + return i2c_add_driver(&mcs5000_ts_driver); +} + +static void __exit mcs5000_ts_exit(void) +{ + i2c_del_driver(&mcs5000_ts_driver); +} + +module_init(mcs5000_ts_init); +module_exit(mcs5000_ts_exit); + +/* Module information */ +MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>"); +MODULE_DESCRIPTION("Touchscreen driver for MELFAS MCS-5000 controller"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/pcap_ts.c b/drivers/input/touchscreen/pcap_ts.c new file mode 100644 index 00000000000..67fcd33595d --- /dev/null +++ b/drivers/input/touchscreen/pcap_ts.c @@ -0,0 +1,271 @@ +/* + * Driver for Motorola PCAP2 touchscreen as found in the EZX phone platform. + * + * Copyright (C) 2006 Harald Welte <laforge@openezx.org> + * Copyright (C) 2009 Daniel Ribeiro <drwyrm@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/string.h> +#include <linux/pm.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/mfd/ezx-pcap.h> + +struct pcap_ts { + struct pcap_chip *pcap; + struct input_dev *input; + struct delayed_work work; + u16 x, y; + u16 pressure; + u8 read_state; +}; + +#define SAMPLE_DELAY 20 /* msecs */ + +#define X_AXIS_MIN 0 +#define X_AXIS_MAX 1023 +#define Y_AXIS_MAX X_AXIS_MAX +#define Y_AXIS_MIN X_AXIS_MIN +#define PRESSURE_MAX X_AXIS_MAX +#define PRESSURE_MIN X_AXIS_MIN + +static void pcap_ts_read_xy(void *data, u16 res[2]) +{ + struct pcap_ts *pcap_ts = data; + + switch (pcap_ts->read_state) { + case PCAP_ADC_TS_M_PRESSURE: + /* pressure reading is unreliable */ + if (res[0] > PRESSURE_MIN && res[0] < PRESSURE_MAX) + pcap_ts->pressure = res[0]; + pcap_ts->read_state = PCAP_ADC_TS_M_XY; + schedule_delayed_work(&pcap_ts->work, 0); + break; + case PCAP_ADC_TS_M_XY: + pcap_ts->y = res[0]; + pcap_ts->x = res[1]; + if (pcap_ts->x <= X_AXIS_MIN || pcap_ts->x >= X_AXIS_MAX || + pcap_ts->y <= Y_AXIS_MIN || pcap_ts->y >= Y_AXIS_MAX) { + /* pen has been released */ + input_report_abs(pcap_ts->input, ABS_PRESSURE, 0); + input_report_key(pcap_ts->input, BTN_TOUCH, 0); + + pcap_ts->read_state = PCAP_ADC_TS_M_STANDBY; + schedule_delayed_work(&pcap_ts->work, 0); + } else { + /* pen is touching the screen */ + input_report_abs(pcap_ts->input, ABS_X, pcap_ts->x); + input_report_abs(pcap_ts->input, ABS_Y, pcap_ts->y); + input_report_key(pcap_ts->input, BTN_TOUCH, 1); + input_report_abs(pcap_ts->input, ABS_PRESSURE, + pcap_ts->pressure); + + /* switch back to pressure read mode */ + pcap_ts->read_state = PCAP_ADC_TS_M_PRESSURE; + schedule_delayed_work(&pcap_ts->work, + msecs_to_jiffies(SAMPLE_DELAY)); + } + input_sync(pcap_ts->input); + break; + default: + dev_warn(&pcap_ts->input->dev, + "pcap_ts: Warning, unhandled read_state %d\n", + pcap_ts->read_state); + break; + } +} + +static void pcap_ts_work(struct work_struct *work) +{ + struct delayed_work *dw = container_of(work, struct delayed_work, work); + struct pcap_ts *pcap_ts = container_of(dw, struct pcap_ts, work); + u8 ch[2]; + + pcap_set_ts_bits(pcap_ts->pcap, + pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT); + + if (pcap_ts->read_state == PCAP_ADC_TS_M_STANDBY) + return; + + /* start adc conversion */ + ch[0] = PCAP_ADC_CH_TS_X1; + ch[1] = PCAP_ADC_CH_TS_Y1; + pcap_adc_async(pcap_ts->pcap, PCAP_ADC_BANK_1, 0, ch, + pcap_ts_read_xy, pcap_ts); +} + +static irqreturn_t pcap_ts_event_touch(int pirq, void *data) +{ + struct pcap_ts *pcap_ts = data; + + if (pcap_ts->read_state == PCAP_ADC_TS_M_STANDBY) { + pcap_ts->read_state = PCAP_ADC_TS_M_PRESSURE; + schedule_delayed_work(&pcap_ts->work, 0); + } + return IRQ_HANDLED; +} + +static int pcap_ts_open(struct input_dev *dev) +{ + struct pcap_ts *pcap_ts = input_get_drvdata(dev); + + pcap_ts->read_state = PCAP_ADC_TS_M_STANDBY; + schedule_delayed_work(&pcap_ts->work, 0); + + return 0; +} + +static void pcap_ts_close(struct input_dev *dev) +{ + struct pcap_ts *pcap_ts = input_get_drvdata(dev); + + cancel_delayed_work_sync(&pcap_ts->work); + + pcap_ts->read_state = PCAP_ADC_TS_M_NONTS; + pcap_set_ts_bits(pcap_ts->pcap, + pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT); +} + +static int __devinit pcap_ts_probe(struct platform_device *pdev) +{ + struct input_dev *input_dev; + struct pcap_ts *pcap_ts; + int err = -ENOMEM; + + pcap_ts = kzalloc(sizeof(*pcap_ts), GFP_KERNEL); + if (!pcap_ts) + return err; + + pcap_ts->pcap = dev_get_drvdata(pdev->dev.parent); + platform_set_drvdata(pdev, pcap_ts); + + input_dev = input_allocate_device(); + if (!input_dev) + goto fail; + + INIT_DELAYED_WORK(&pcap_ts->work, pcap_ts_work); + + pcap_ts->read_state = PCAP_ADC_TS_M_NONTS; + pcap_set_ts_bits(pcap_ts->pcap, + pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT); + + pcap_ts->input = input_dev; + input_set_drvdata(input_dev, pcap_ts); + + input_dev->name = "pcap-touchscreen"; + input_dev->phys = "pcap_ts/input0"; + input_dev->id.bustype = BUS_HOST; + input_dev->id.vendor = 0x0001; + input_dev->id.product = 0x0002; + input_dev->id.version = 0x0100; + input_dev->dev.parent = &pdev->dev; + input_dev->open = pcap_ts_open; + input_dev->close = pcap_ts_close; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(input_dev, ABS_X, X_AXIS_MIN, X_AXIS_MAX, 0, 0); + input_set_abs_params(input_dev, ABS_Y, Y_AXIS_MIN, Y_AXIS_MAX, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, PRESSURE_MIN, + PRESSURE_MAX, 0, 0); + + err = input_register_device(pcap_ts->input); + if (err) + goto fail_allocate; + + err = request_irq(pcap_to_irq(pcap_ts->pcap, PCAP_IRQ_TS), + pcap_ts_event_touch, 0, "Touch Screen", pcap_ts); + if (err) + goto fail_register; + + return 0; + +fail_register: + input_unregister_device(input_dev); + goto fail; +fail_allocate: + input_free_device(input_dev); +fail: + kfree(pcap_ts); + + return err; +} + +static int __devexit pcap_ts_remove(struct platform_device *pdev) +{ + struct pcap_ts *pcap_ts = platform_get_drvdata(pdev); + + free_irq(pcap_to_irq(pcap_ts->pcap, PCAP_IRQ_TS), pcap_ts); + cancel_delayed_work_sync(&pcap_ts->work); + + input_unregister_device(pcap_ts->input); + + kfree(pcap_ts); + + return 0; +} + +#ifdef CONFIG_PM +static int pcap_ts_suspend(struct device *dev) +{ + struct pcap_ts *pcap_ts = dev_get_drvdata(dev); + + pcap_set_ts_bits(pcap_ts->pcap, PCAP_ADC_TS_REF_LOWPWR); + return 0; +} + +static int pcap_ts_resume(struct device *dev) +{ + struct pcap_ts *pcap_ts = dev_get_drvdata(dev); + + pcap_set_ts_bits(pcap_ts->pcap, + pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT); + return 0; +} + +static struct dev_pm_ops pcap_ts_pm_ops = { + .suspend = pcap_ts_suspend, + .resume = pcap_ts_resume, +}; +#define PCAP_TS_PM_OPS (&pcap_ts_pm_ops) +#else +#define PCAP_TS_PM_OPS NULL +#endif + +static struct platform_driver pcap_ts_driver = { + .probe = pcap_ts_probe, + .remove = __devexit_p(pcap_ts_remove), + .driver = { + .name = "pcap-ts", + .owner = THIS_MODULE, + .pm = PCAP_TS_PM_OPS, + }, +}; + +static int __init pcap_ts_init(void) +{ + return platform_driver_register(&pcap_ts_driver); +} + +static void __exit pcap_ts_exit(void) +{ + platform_driver_unregister(&pcap_ts_driver); +} + +module_init(pcap_ts_init); +module_exit(pcap_ts_exit); + +MODULE_DESCRIPTION("Motorola PCAP2 touchscreen driver"); +MODULE_AUTHOR("Daniel Ribeiro / Harald Welte"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pcap_ts"); diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c index 252eb11fe9d..f944918466e 100644 --- a/drivers/input/touchscreen/wm97xx-core.c +++ b/drivers/input/touchscreen/wm97xx-core.c @@ -561,6 +561,7 @@ static void wm97xx_ts_input_close(struct input_dev *idev) static int wm97xx_probe(struct device *dev) { struct wm97xx *wm; + struct wm97xx_pdata *pdata = dev->platform_data; int ret = 0, id = 0; wm = kzalloc(sizeof(struct wm97xx), GFP_KERNEL); @@ -658,6 +659,7 @@ static int wm97xx_probe(struct device *dev) } platform_set_drvdata(wm->battery_dev, wm); wm->battery_dev->dev.parent = dev; + wm->battery_dev->dev.platform_data = pdata; ret = platform_device_add(wm->battery_dev); if (ret < 0) goto batt_reg_err; @@ -671,6 +673,7 @@ static int wm97xx_probe(struct device *dev) } platform_set_drvdata(wm->touch_dev, wm); wm->touch_dev->dev.parent = dev; + wm->touch_dev->dev.platform_data = pdata; ret = platform_device_add(wm->touch_dev); if (ret < 0) goto touch_reg_err; |