diff options
Diffstat (limited to 'drivers/macintosh/macserial.c')
| -rw-r--r-- | drivers/macintosh/macserial.c | 3036 |
1 files changed, 3036 insertions, 0 deletions
diff --git a/drivers/macintosh/macserial.c b/drivers/macintosh/macserial.c new file mode 100644 index 00000000000..0be3ac6cc16 --- /dev/null +++ b/drivers/macintosh/macserial.c @@ -0,0 +1,3036 @@ +/* + * macserial.c: Serial port driver for Power Macintoshes. + * + * Derived from drivers/sbus/char/sunserial.c by Paul Mackerras. + * + * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au) + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * + * Receive DMA code by Takashi Oe <toe@unlserve.unl.edu>. + * + * $Id: macserial.c,v 1.24.2.4 1999/10/19 04:36:42 paulus Exp $ + */ + +#include <linux/config.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/workqueue.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/major.h> +#include <linux/string.h> +#include <linux/fcntl.h> +#include <linux/mm.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/init.h> +#ifdef CONFIG_SERIAL_CONSOLE +#include <linux/console.h> +#endif +#include <linux/slab.h> +#include <linux/bitops.h> + +#include <asm/sections.h> +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/irq.h> +#include <asm/prom.h> +#include <asm/system.h> +#include <asm/segment.h> +#include <asm/machdep.h> +#include <asm/pmac_feature.h> +#include <linux/adb.h> +#include <linux/pmu.h> +#ifdef CONFIG_KGDB +#include <asm/kgdb.h> +#endif +#include <asm/dbdma.h> + +#include "macserial.h" + +#ifdef CONFIG_PMAC_PBOOK +static int serial_notify_sleep(struct pmu_sleep_notifier *self, int when); +static struct pmu_sleep_notifier serial_sleep_notifier = { + serial_notify_sleep, + SLEEP_LEVEL_MISC, +}; +#endif + +#define SUPPORT_SERIAL_DMA +#define MACSERIAL_VERSION "2.0" + +/* + * It would be nice to dynamically allocate everything that + * depends on NUM_SERIAL, so we could support any number of + * Z8530s, but for now... + */ +#define NUM_SERIAL 2 /* Max number of ZS chips supported */ +#define NUM_CHANNELS (NUM_SERIAL * 2) /* 2 channels per chip */ + +/* On PowerMacs, the hardware takes care of the SCC recovery time, + but we need the eieio to make sure that the accesses occur + in the order we want. */ +#define RECOVERY_DELAY eieio() + +static struct tty_driver *serial_driver; + +struct mac_zschannel zs_channels[NUM_CHANNELS]; + +struct mac_serial zs_soft[NUM_CHANNELS]; +int zs_channels_found; +struct mac_serial *zs_chain; /* list of all channels */ + +struct tty_struct zs_ttys[NUM_CHANNELS]; + +static int is_powerbook; + +#ifdef CONFIG_SERIAL_CONSOLE +static struct console sercons; +#endif + +#ifdef CONFIG_KGDB +struct mac_zschannel *zs_kgdbchan; +static unsigned char scc_inittab[] = { + 9, 0x80, /* reset A side (CHRA) */ + 13, 0, /* set baud rate divisor */ + 12, 1, + 14, 1, /* baud rate gen enable, src=rtxc (BRENABL) */ + 11, 0x50, /* clocks = br gen (RCBR | TCBR) */ + 5, 0x6a, /* tx 8 bits, assert RTS (Tx8 | TxENAB | RTS) */ + 4, 0x44, /* x16 clock, 1 stop (SB1 | X16CLK)*/ + 3, 0xc1, /* rx enable, 8 bits (RxENABLE | Rx8)*/ +}; +#endif +#define ZS_CLOCK 3686400 /* Z8530 RTxC input clock rate */ + +/* serial subtype definitions */ +#define SERIAL_TYPE_NORMAL 1 + +/* number of characters left in xmit buffer before we ask for more */ +#define WAKEUP_CHARS 256 + +/* + * Debugging. + */ +#undef SERIAL_DEBUG_INTR +#undef SERIAL_DEBUG_OPEN +#undef SERIAL_DEBUG_FLOW +#undef SERIAL_DEBUG_POWER +#undef SERIAL_DEBUG_THROTTLE +#undef SERIAL_DEBUG_STOP +#undef SERIAL_DEBUG_BAUDS + +#define RS_STROBE_TIME 10 +#define RS_ISR_PASS_LIMIT 256 + +#define _INLINE_ inline + +#ifdef SERIAL_DEBUG_OPEN +#define OPNDBG(fmt, arg...) printk(KERN_DEBUG fmt , ## arg) +#else +#define OPNDBG(fmt, arg...) do { } while (0) +#endif +#ifdef SERIAL_DEBUG_POWER +#define PWRDBG(fmt, arg...) printk(KERN_DEBUG fmt , ## arg) +#else +#define PWRDBG(fmt, arg...) do { } while (0) +#endif +#ifdef SERIAL_DEBUG_BAUDS +#define BAUDBG(fmt, arg...) printk(fmt , ## arg) +#else +#define BAUDBG(fmt, arg...) do { } while (0) +#endif + +static void probe_sccs(void); +static void change_speed(struct mac_serial *info, struct termios *old); +static void rs_wait_until_sent(struct tty_struct *tty, int timeout); +static int set_scc_power(struct mac_serial * info, int state); +static int setup_scc(struct mac_serial * info); +static void dbdma_reset(volatile struct dbdma_regs *dma); +static void dbdma_flush(volatile struct dbdma_regs *dma); +static irqreturn_t rs_txdma_irq(int irq, void *dev_id, struct pt_regs *regs); +static irqreturn_t rs_rxdma_irq(int irq, void *dev_id, struct pt_regs *regs); +static void dma_init(struct mac_serial * info); +static void rxdma_start(struct mac_serial * info, int curr); +static void rxdma_to_tty(struct mac_serial * info); + +/* + * tmp_buf is used as a temporary buffer by serial_write. We need to + * lock it in case the copy_from_user blocks while swapping in a page, + * and some other program tries to do a serial write at the same time. + * Since the lock will only come under contention when the system is + * swapping and available memory is low, it makes sense to share one + * buffer across all the serial ports, since it significantly saves + * memory if large numbers of serial ports are open. + */ +static unsigned char *tmp_buf; +static DECLARE_MUTEX(tmp_buf_sem); + + +static inline int __pmac +serial_paranoia_check(struct mac_serial *info, + char *name, const char *routine) +{ +#ifdef SERIAL_PARANOIA_CHECK + static const char badmagic[] = KERN_WARNING + "Warning: bad magic number for serial struct %s in %s\n"; + static const char badinfo[] = KERN_WARNING + "Warning: null mac_serial for %s in %s\n"; + + if (!info) { + printk(badinfo, name, routine); + return 1; + } + if (info->magic != SERIAL_MAGIC) { + printk(badmagic, name, routine); + return 1; + } +#endif + return 0; +} + +/* + * Reading and writing Z8530 registers. + */ +static inline unsigned char __pmac read_zsreg(struct mac_zschannel *channel, + unsigned char reg) +{ + unsigned char retval; + unsigned long flags; + + /* + * We have to make this atomic. + */ + spin_lock_irqsave(&channel->lock, flags); + if (reg != 0) { + *channel->control = reg; + RECOVERY_DELAY; + } + retval = *channel->control; + RECOVERY_DELAY; + spin_unlock_irqrestore(&channel->lock, flags); + return retval; +} + +static inline void __pmac write_zsreg(struct mac_zschannel *channel, + unsigned char reg, unsigned char value) +{ + unsigned long flags; + + spin_lock_irqsave(&channel->lock, flags); + if (reg != 0) { + *channel->control = reg; + RECOVERY_DELAY; + } + *channel->control = value; + RECOVERY_DELAY; + spin_unlock_irqrestore(&channel->lock, flags); + return; +} + +static inline unsigned char __pmac read_zsdata(struct mac_zschannel *channel) +{ + unsigned char retval; + + retval = *channel->data; + RECOVERY_DELAY; + return retval; +} + +static inline void write_zsdata(struct mac_zschannel *channel, + unsigned char value) +{ + *channel->data = value; + RECOVERY_DELAY; + return; +} + +static inline void load_zsregs(struct mac_zschannel *channel, + unsigned char *regs) +{ + ZS_CLEARERR(channel); + ZS_CLEARFIFO(channel); + /* Load 'em up */ + write_zsreg(channel, R4, regs[R4]); + write_zsreg(channel, R10, regs[R10]); + write_zsreg(channel, R3, regs[R3] & ~RxENABLE); + write_zsreg(channel, R5, regs[R5] & ~TxENAB); + write_zsreg(channel, R1, regs[R1]); + write_zsreg(channel, R9, regs[R9]); + write_zsreg(channel, R11, regs[R11]); + write_zsreg(channel, R12, regs[R12]); + write_zsreg(channel, R13, regs[R13]); + write_zsreg(channel, R14, regs[R14]); + write_zsreg(channel, R15, regs[R15]); + write_zsreg(channel, R3, regs[R3]); + write_zsreg(channel, R5, regs[R5]); + return; +} + +/* Sets or clears DTR/RTS on the requested line */ +static inline void zs_rtsdtr(struct mac_serial *ss, int set) +{ + if (set) + ss->curregs[5] |= (RTS | DTR); + else + ss->curregs[5] &= ~(RTS | DTR); + write_zsreg(ss->zs_channel, 5, ss->curregs[5]); + return; +} + +/* Utility routines for the Zilog */ +static inline int get_zsbaud(struct mac_serial *ss) +{ + struct mac_zschannel *channel = ss->zs_channel; + int brg; + + if ((ss->curregs[R11] & TCBR) == 0) { + /* higher rates don't use the baud rate generator */ + return (ss->curregs[R4] & X32CLK)? ZS_CLOCK/32: ZS_CLOCK/16; + } + /* The baud rate is split up between two 8-bit registers in + * what is termed 'BRG time constant' format in my docs for + * the chip, it is a function of the clk rate the chip is + * receiving which happens to be constant. + */ + brg = (read_zsreg(channel, 13) << 8); + brg |= read_zsreg(channel, 12); + return BRG_TO_BPS(brg, (ZS_CLOCK/(ss->clk_divisor))); +} + +/* On receive, this clears errors and the receiver interrupts */ +static inline void rs_recv_clear(struct mac_zschannel *zsc) +{ + write_zsreg(zsc, 0, ERR_RES); + write_zsreg(zsc, 0, RES_H_IUS); /* XXX this is unnecessary */ +} + +/* + * Reset a Descriptor-Based DMA channel. + */ +static void dbdma_reset(volatile struct dbdma_regs *dma) +{ + int i; + + out_le32(&dma->control, (WAKE|FLUSH|PAUSE|RUN) << 16); + + /* + * Yes this looks peculiar, but apparently it needs to be this + * way on some machines. (We need to make sure the DBDMA + * engine has actually got the write above and responded + * to it. - paulus) + */ + for (i = 200; i > 0; --i) + if (ld_le32(&dma->status) & RUN) + udelay(1); +} + +/* + * Tells a DBDMA channel to stop and write any buffered data + * it might have to memory. + */ +static _INLINE_ void dbdma_flush(volatile struct dbdma_regs *dma) +{ + int i = 0; + + out_le32(&dma->control, (FLUSH << 16) | FLUSH); + while (((in_le32(&dma->status) & FLUSH) != 0) && (i++ < 100)) + udelay(1); +} + +/* + * ---------------------------------------------------------------------- + * + * Here starts the interrupt handling routines. All of the following + * subroutines are declared as inline and are folded into + * rs_interrupt(). They were separated out for readability's sake. + * + * - Ted Ts'o (tytso@mit.edu), 7-Mar-93 + * ----------------------------------------------------------------------- + */ + +/* + * This routine is used by the interrupt handler to schedule + * processing in the software interrupt portion of the driver. + */ +static _INLINE_ void rs_sched_event(struct mac_serial *info, + int event) +{ + info->event |= 1 << event; + schedule_work(&info->tqueue); +} + +/* Work out the flag value for a z8530 status value. */ +static _INLINE_ int stat_to_flag(int stat) +{ + int flag; + + if (stat & Rx_OVR) { + flag = TTY_OVERRUN; + } else if (stat & FRM_ERR) { + flag = TTY_FRAME; + } else if (stat & PAR_ERR) { + flag = TTY_PARITY; + } else + flag = 0; + return flag; +} + +static _INLINE_ void receive_chars(struct mac_serial *info, + struct pt_regs *regs) +{ + struct tty_struct *tty = info->tty; + unsigned char ch, stat, flag; + + while ((read_zsreg(info->zs_channel, 0) & Rx_CH_AV) != 0) { + + stat = read_zsreg(info->zs_channel, R1); + ch = read_zsdata(info->zs_channel); + +#ifdef CONFIG_KGDB + if (info->kgdb_channel) { + if (ch == 0x03 || ch == '$') + breakpoint(); + if (stat & (Rx_OVR|FRM_ERR|PAR_ERR)) + write_zsreg(info->zs_channel, 0, ERR_RES); + return; + } +#endif + if (!tty) + continue; + if (tty->flip.count >= TTY_FLIPBUF_SIZE) + tty_flip_buffer_push(tty); + + if (tty->flip.count >= TTY_FLIPBUF_SIZE) { + static int flip_buf_ovf; + if (++flip_buf_ovf <= 1) + printk(KERN_WARNING "FB. overflow: %d\n", + flip_buf_ovf); + break; + } + tty->flip.count++; + { + static int flip_max_cnt; + if (flip_max_cnt < tty->flip.count) + flip_max_cnt = tty->flip.count; + } + flag = stat_to_flag(stat); + if (flag) + /* reset the error indication */ + write_zsreg(info->zs_channel, 0, ERR_RES); + *tty->flip.flag_buf_ptr++ = flag; + *tty->flip.char_buf_ptr++ = ch; + } + if (tty) + tty_flip_buffer_push(tty); +} + +static void transmit_chars(struct mac_serial *info) +{ + if ((read_zsreg(info->zs_channel, 0) & Tx_BUF_EMP) == 0) + return; + info->tx_active = 0; + + if (info->x_char && !info->power_wait) { + /* Send next char */ + write_zsdata(info->zs_channel, info->x_char); + info->x_char = 0; + info->tx_active = 1; + return; + } + + if ((info->xmit_cnt <= 0) || info->tty->stopped || info->tx_stopped + || info->power_wait) { + write_zsreg(info->zs_channel, 0, RES_Tx_P); + return; + } + + /* Send char */ + write_zsdata(info->zs_channel, info->xmit_buf[info->xmit_tail++]); + info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); + info->xmit_cnt--; + info->tx_active = 1; + + if (info->xmit_cnt < WAKEUP_CHARS) + rs_sched_event(info, RS_EVENT_WRITE_WAKEUP); +} + +static void powerup_done(unsigned long data) +{ + struct mac_serial *info = (struct mac_serial *) data; + unsigned long flags; + + spin_lock_irqsave(&info->lock, flags); + info->power_wait = 0; + transmit_chars(info); + spin_unlock_irqrestore(&info->lock, flags); +} + +static _INLINE_ void status_handle(struct mac_serial *info) +{ + unsigned char status; + + /* Get status from Read Register 0 */ + status = read_zsreg(info->zs_channel, 0); + + /* Check for DCD transitions */ + if (((status ^ info->read_reg_zero) & DCD) != 0 + && info->tty && !C_CLOCAL(info->tty)) { + if (status & DCD) { + wake_up_interruptible(&info->open_wait); + } else { + if (info->tty) + tty_hangup(info->tty); + } + } + + /* Check for CTS transitions */ + if (info->tty && C_CRTSCTS(info->tty)) { + /* + * For some reason, on the Power Macintosh, + * it seems that the CTS bit is 1 when CTS is + * *negated* and 0 when it is asserted. + * The DCD bit doesn't seem to be inverted + * like this. + */ + if ((status & CTS) == 0) { + if (info->tx_stopped) { +#ifdef SERIAL_DEBUG_FLOW + printk(KERN_DEBUG "CTS up\n"); +#endif + info->tx_stopped = 0; + if (!info->tx_active) + transmit_chars(info); + } + } else { +#ifdef SERIAL_DEBUG_FLOW + printk(KERN_DEBUG "CTS down\n"); +#endif + info->tx_stopped = 1; + } + } + + /* Clear status condition... */ + write_zsreg(info->zs_channel, 0, RES_EXT_INT); + info->read_reg_zero = status; +} + +static _INLINE_ void receive_special_dma(struct mac_serial *info) +{ + unsigned char stat, flag; + volatile struct dbdma_regs *rd = &info->rx->dma; + int where = RX_BUF_SIZE; + + spin_lock(&info->rx_dma_lock); + if ((ld_le32(&rd->status) & ACTIVE) != 0) + dbdma_flush(rd); + if (in_le32(&rd->cmdptr) + == virt_to_bus(info->rx_cmds[info->rx_cbuf] + 1)) + where -= in_le16(&info->rx->res_count); + where--; + + stat = read_zsreg(info->zs_channel, R1); + + flag = stat_to_flag(stat); + if (flag) { + info->rx_flag_buf[info->rx_cbuf][where] = flag; + /* reset the error indication */ + write_zsreg(info->zs_channel, 0, ERR_RES); + } + + spin_unlock(&info->rx_dma_lock); +} + +/* + * This is the serial driver's generic interrupt routine + */ +static irqreturn_t rs_interrupt(int irq, void *dev_id, struct pt_regs * regs) +{ + struct mac_serial *info = (struct mac_serial *) dev_id; + unsigned char zs_intreg; + int shift; + unsigned long flags; + int handled = 0; + + if (!(info->flags & ZILOG_INITIALIZED)) { + printk(KERN_WARNING "rs_interrupt: irq %d, port not " + "initialized\n", irq); + disable_irq(irq); + return IRQ_NONE; + } + + /* NOTE: The read register 3, which holds the irq status, + * does so for both channels on each chip. Although + * the status value itself must be read from the A + * channel and is only valid when read from channel A. + * Yes... broken hardware... + */ +#define CHAN_IRQMASK (CHBRxIP | CHBTxIP | CHBEXT) + + if (info->zs_chan_a == info->zs_channel) + shift = 3; /* Channel A */ + else + shift = 0; /* Channel B */ + + spin_lock_irqsave(&info->lock, flags); + for (;;) { + zs_intreg = read_zsreg(info->zs_chan_a, 3) >> shift; +#ifdef SERIAL_DEBUG_INTR + printk(KERN_DEBUG "rs_interrupt: irq %d, zs_intreg 0x%x\n", + irq, (int)zs_intreg); +#endif + + if ((zs_intreg & CHAN_IRQMASK) == 0) + break; + handled = 1; + + if (zs_intreg & CHBRxIP) { + /* If we are doing DMA, we only ask for interrupts + on characters with errors or special conditions. */ + if (info->dma_initted) + receive_special_dma(info); + else + receive_chars(info, regs); + } + if (zs_intreg & CHBTxIP) + transmit_chars(info); + if (zs_intreg & CHBEXT) + status_handle(info); + } + spin_unlock_irqrestore(&info->lock, flags); + return IRQ_RETVAL(handled); +} + +/* Transmit DMA interrupt - not used at present */ +static irqreturn_t rs_txdma_irq(int irq, void *dev_id, struct pt_regs *regs) +{ + return IRQ_HANDLED; +} + +/* + * Receive DMA interrupt. + */ +static irqreturn_t rs_rxdma_irq(int irq, void *dev_id, struct pt_regs *regs) +{ + struct mac_serial *info = (struct mac_serial *) dev_id; + volatile struct dbdma_cmd *cd; + + if (!info->dma_initted) + return IRQ_NONE; + spin_lock(&info->rx_dma_lock); + /* First, confirm that this interrupt is, indeed, coming */ + /* from Rx DMA */ + cd = info->rx_cmds[info->rx_cbuf] + 2; + if ((in_le16(&cd->xfer_status) & (RUN | ACTIVE)) != (RUN | ACTIVE)) { + spin_unlock(&info->rx_dma_lock); + return IRQ_NONE; + } + if (info->rx_fbuf != RX_NO_FBUF) { + info->rx_cbuf = info->rx_fbuf; + if (++info->rx_fbuf == info->rx_nbuf) + info->rx_fbuf = 0; + if (info->rx_fbuf == info->rx_ubuf) + info->rx_fbuf = RX_NO_FBUF; + } + spin_unlock(&info->rx_dma_lock); + return IRQ_HANDLED; +} + +/* + * ------------------------------------------------------------------- + * Here ends the serial interrupt routines. + * ------------------------------------------------------------------- + */ + +/* + * ------------------------------------------------------------ + * rs_stop() and rs_start() + * + * This routines are called before setting or resetting tty->stopped. + * ------------------------------------------------------------ + */ +static void rs_stop(struct tty_struct *tty) +{ + struct mac_serial *info = (struct mac_serial *)tty->driver_data; + +#ifdef SERIAL_DEBUG_STOP + printk(KERN_DEBUG "rs_stop %ld....\n", + tty->ldisc.chars_in_buffer(tty)); +#endif + + if (serial_paranoia_check(info, tty->name, "rs_stop")) + return; + +#if 0 + spin_lock_irqsave(&info->lock, flags); + if (info->curregs[5] & TxENAB) { + info->curregs[5] &= ~TxENAB; + info->pendregs[5] &= ~TxENAB; + write_zsreg(info->zs_channel, 5, info->curregs[5]); + } + spin_unlock_irqrestore(&info->lock, flags); +#endif +} + +static void rs_start(struct tty_struct *tty) +{ + struct mac_serial *info = (struct mac_serial *)tty->driver_data; + unsigned long flags; + +#ifdef SERIAL_DEBUG_STOP + printk(KERN_DEBUG "rs_start %ld....\n", + tty->ldisc.chars_in_buffer(tty)); +#endif + + if (serial_paranoia_check(info, tty->name, "rs_start")) + return; + + spin_lock_irqsave(&info->lock, flags); +#if 0 + if (info->xmit_cnt && info->xmit_buf && !(info->curregs[5] & TxENAB)) { + info->curregs[5] |= TxENAB; + info->pendregs[5] = info->curregs[5]; + write_zsreg(info->zs_channel, 5, info->curregs[5]); + } +#else + if (info->xmit_cnt && info->xmit_buf && !info->tx_active) { + transmit_chars(info); + } +#endif + spin_unlock_irqrestore(&info->lock, flags); +} + +static void do_softint(void *private_) +{ + struct mac_serial *info = (struct mac_serial *) private_; + struct tty_struct *tty; + + tty = info->tty; + if (!tty) + return; + + if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) + tty_wakeup(tty); +} + +static int startup(struct mac_serial * info) +{ + int delay; + + OPNDBG("startup() (ttyS%d, irq %d)\n", info->line, info->irq); + + if (info->flags & ZILOG_INITIALIZED) { + OPNDBG(" -> already inited\n"); + return 0; + } + + if (!info->xmit_buf) { + info->xmit_buf = (unsigned char *) get_zeroed_page(GFP_KERNEL); + if (!info->xmit_buf) + return -ENOMEM; + } + + OPNDBG("starting up ttyS%d (irq %d)...\n", info->line, info->irq); + + delay = set_scc_power(info, 1); + + setup_scc(info); + + if (delay) { + unsigned long flags; + + /* delay is in ms */ + spin_lock_irqsave(&info->lock, flags); + info->power_wait = 1; + mod_timer(&info->powerup_timer, + jiffies + (delay * HZ + 999) / 1000); + spin_unlock_irqrestore(&info->lock, flags); + } + + OPNDBG("enabling IRQ on ttyS%d (irq %d)...\n", info->line, info->irq); + + info->flags |= ZILOG_INITIALIZED; + enable_irq(info->irq); + if (info->dma_initted) { + enable_irq(info->rx_dma_irq); + } + + return 0; +} + +static _INLINE_ void rxdma_start(struct mac_serial * info, int curr) +{ + volatile struct dbdma_regs *rd = &info->rx->dma; + volatile struct dbdma_cmd *cd = info->rx_cmds[curr]; + +//printk(KERN_DEBUG "SCC: rxdma_start\n"); + + st_le32(&rd->cmdptr, virt_to_bus(cd)); + out_le32(&rd->control, (RUN << 16) | RUN); +} + +static void rxdma_to_tty(struct mac_serial *info) +{ + struct tty_struct *tty = info->tty; + volatile struct dbdma_regs *rd = &info->rx->dma; + unsigned long flags; + int residue, available, space, do_queue; + + if (!tty) + return; + + do_queue = 0; + spin_lock_irqsave(&info->rx_dma_lock, flags); +more: + space = TTY_FLIPBUF_SIZE - tty->flip.count; + if (!space) { + do_queue++; + goto out; + } + residue = 0; + if (info->rx_ubuf == info->rx_cbuf) { + if ((ld_le32(&rd->status) & ACTIVE) != 0) { + dbdma_flush(rd); + if (in_le32(&rd->cmdptr) + == virt_to_bus(info->rx_cmds[info->rx_cbuf]+1)) + residue = in_le16(&info->rx->res_count); + } + } + available = RX_BUF_SIZE - residue - info->rx_done_bytes; + if (available > space) + available = space; + if (available) { + memcpy(tty->flip.char_buf_ptr, + info->rx_char_buf[info->rx_ubuf] + info->rx_done_bytes, + available); + memcpy(tty->flip.flag_buf_ptr, + info->rx_flag_buf[info->rx_ubuf] + info->rx_done_bytes, + available); + tty->flip.char_buf_ptr += available; + tty->flip.count += available; + tty->flip.flag_buf_ptr += available; + memset(info->rx_flag_buf[info->rx_ubuf] + info->rx_done_bytes, + 0, available); + info->rx_done_bytes += available; + do_queue++; + } + if (info->rx_done_bytes == RX_BUF_SIZE) { + volatile struct dbdma_cmd *cd = info->rx_cmds[info->rx_ubuf]; + + if (info->rx_ubuf == info->rx_cbuf) + goto out; + /* mark rx_char_buf[rx_ubuf] free */ + st_le16(&cd->command, DBDMA_NOP); + cd++; + st_le32(&cd->cmd_dep, 0); + st_le32((unsigned int *)&cd->res_count, 0); + cd++; + st_le16(&cd->xfer_status, 0); + + if (info->rx_fbuf == RX_NO_FBUF) { + info->rx_fbuf = info->rx_ubuf; + if (!(ld_le32(&rd->status) & ACTIVE)) { + dbdma_reset(&info->rx->dma); + rxdma_start(info, info->rx_ubuf); + info->rx_cbuf = info->rx_ubuf; + } + } + info->rx_done_bytes = 0; + if (++info->rx_ubuf == info->rx_nbuf) + info->rx_ubuf = 0; + if (info->rx_fbuf == info->rx_ubuf) + info->rx_fbuf = RX_NO_FBUF; + goto more; + } +out: + spin_unlock_irqrestore(&info->rx_dma_lock, flags); + if (do_queue) + tty_flip_buffer_push(tty); +} + +static void poll_rxdma(unsigned long private_) +{ + struct mac_serial *info = (struct mac_serial *) private_; + unsigned long flags; + + rxdma_to_tty(info); + spin_lock_irqsave(&info->rx_dma_lock, flags); + mod_timer(&info->poll_dma_timer, RX_DMA_TIMER); + spin_unlock_irqrestore(&info->rx_dma_lock, flags); +} + +static void dma_init(struct mac_serial * info) +{ + int i, size; + volatile struct dbdma_cmd *cd; + unsigned char *p; + + info->rx_nbuf = 8; + + /* various mem set up */ + size = sizeof(struct dbdma_cmd) * (3 * info->rx_nbuf + 2) + + (RX_BUF_SIZE * 2 + sizeof(*info->rx_cmds) + + sizeof(*info->rx_char_buf) + sizeof(*info->rx_flag_buf)) + * info->rx_nbuf; + info->dma_priv = kmalloc(size, GFP_KERNEL | GFP_DMA); + if (info->dma_priv == NULL) + return; + memset(info->dma_priv, 0, size); + + info->rx_cmds = (volatile struct dbdma_cmd **)info->dma_priv; + info->rx_char_buf = (unsigned char **) (info->rx_cmds + info->rx_nbuf); + info->rx_flag_buf = info->rx_char_buf + info->rx_nbuf; + p = (unsigned char *) (info->rx_flag_buf + info->rx_nbuf); + for (i = 0; i < info->rx_nbuf; i++, p += RX_BUF_SIZE) + info->rx_char_buf[i] = p; + for (i = 0; i < info->rx_nbuf; i++, p += RX_BUF_SIZE) + info->rx_flag_buf[i] = p; + + /* a bit of DMA programming */ + cd = info->rx_cmds[0] = (volatile struct dbdma_cmd *) DBDMA_ALIGN(p); + st_le16(&cd->command, DBDMA_NOP); + cd++; + st_le16(&cd->req_count, RX_BUF_SIZE); + st_le16(&cd->command, INPUT_MORE); + st_le32(&cd->phy_addr, virt_to_bus(info->rx_char_buf[0])); + cd++; + st_le16(&cd->req_count, 4); + st_le16(&cd->command, STORE_WORD | INTR_ALWAYS); + st_le32(&cd->phy_addr, virt_to_bus(cd-2)); + st_le32(&cd->cmd_dep, DBDMA_STOP); + for (i = 1; i < info->rx_nbuf; i++) { + info->rx_cmds[i] = ++cd; + st_le16(&cd->command, DBDMA_NOP); + cd++; + st_le16(&cd->req_count, RX_BUF_SIZE); + st_le16(&cd->command, INPUT_MORE); + st_le32(&cd->phy_addr, virt_to_bus(info->rx_char_buf[i])); + cd++; + st_le16(&cd->req_count, 4); + st_le16(&cd->command, STORE_WORD | INTR_ALWAYS); + st_le32(&cd->phy_addr, virt_to_bus(cd-2)); + st_le32(&cd->cmd_dep, DBDMA_STOP); + } + cd++; + st_le16(&cd->command, DBDMA_NOP | BR_ALWAYS); + st_le32(&cd->cmd_dep, virt_to_bus(info->rx_cmds[0])); + + /* setup DMA to our liking */ + dbdma_reset(&info->rx->dma); + st_le32(&info->rx->dma.intr_sel, 0x10001); + st_le32(&info->rx->dma.br_sel, 0x10001); + out_le32(&info->rx->dma.wait_sel, 0x10001); + + /* set various flags */ + info->rx_ubuf = 0; + info->rx_cbuf = 0; + info->rx_fbuf = info->rx_ubuf + 1; + if (info->rx_fbuf == info->rx_nbuf) + info->rx_fbuf = RX_NO_FBUF; + info->rx_done_bytes = 0; + + /* setup polling */ + init_timer(&info->poll_dma_timer); + info->poll_dma_timer.function = (void *)&poll_rxdma; + info->poll_dma_timer.data = (unsigned long)info; + + info->dma_initted = 1; +} + +/* + * FixZeroBug....Works around a bug in the SCC receving channel. + * Taken from Darwin code, 15 Sept. 2000 -DanM + * + * The following sequence prevents a problem that is seen with O'Hare ASICs + * (most versions -- also with some Heathrow and Hydra ASICs) where a zero + * at the input to the receiver becomes 'stuck' and locks up the receiver. + * This problem can occur as a result of a zero bit at the receiver input + * coincident with any of the following events: + * + * The SCC is initialized (hardware or software). + * A framing error is detected. + * The clocking option changes from synchronous or X1 asynchronous + * clocking to X16, X32, or X64 asynchronous clocking. + * The decoding mode is changed among NRZ, NRZI, FM0, or FM1. + * + * This workaround attempts to recover from the lockup condition by placing + * the SCC in synchronous loopback mode with a fast clock before programming + * any of the asynchronous modes. + */ +static void fix_zero_bug_scc(struct mac_serial * info) +{ + write_zsreg(info->zs_channel, 9, + (info->zs_channel == info->zs_chan_a? CHRA: CHRB)); + udelay(10); + write_zsreg(info->zs_channel, 9, + ((info->zs_channel == info->zs_chan_a? CHRA: CHRB) | NV)); + + write_zsreg(info->zs_channel, 4, (X1CLK | EXTSYNC)); + + /* I think this is wrong....but, I just copying code.... + */ + write_zsreg(info->zs_channel, 3, (8 & ~RxENABLE)); + + write_zsreg(info->zs_channel, 5, (8 & ~TxENAB)); + write_zsreg(info->zs_channel, 9, NV); /* Didn't we already do this? */ + write_zsreg(info->zs_channel, 11, (RCBR | TCBR)); + write_zsreg(info->zs_channel, 12, 0); + write_zsreg(info->zs_channel, 13, 0); + write_zsreg(info->zs_channel, 14, (LOOPBAK | SSBR)); + write_zsreg(info->zs_channel, 14, (LOOPBAK | SSBR | BRENABL)); + write_zsreg(info->zs_channel, 3, (8 | RxENABLE)); + write_zsreg(info->zs_channel, 0, RES_EXT_INT); + write_zsreg(info->zs_channel, 0, RES_EXT_INT); /* to kill some time */ + + /* The channel should be OK now, but it is probably receiving + * loopback garbage. + * Switch to asynchronous mode, disable the receiver, + * and discard everything in the receive buffer. + */ + write_zsreg(info->zs_channel, 9, NV); + write_zsreg(info->zs_channel, 4, PAR_ENA); + write_zsreg(info->zs_channel, 3, (8 & ~RxENABLE)); + + while (read_zsreg(info->zs_channel, 0) & Rx_CH_AV) { + (void)read_zsreg(info->zs_channel, 8); + write_zsreg(info->zs_channel, 0, RES_EXT_INT); + write_zsreg(info->zs_channel, 0, ERR_RES); + } +} + +static int setup_scc(struct mac_serial * info) +{ + unsigned long flags; + + OPNDBG("setting up ttyS%d SCC...\n", info->line); + + spin_lock_irqsave(&info->lock, flags); + + /* Nice buggy HW ... */ + fix_zero_bug_scc(info); + + /* + * Reset the chip. + */ + write_zsreg(info->zs_channel, 9, + (info->zs_channel == info->zs_chan_a? CHRA: CHRB)); + udelay(10); + write_zsreg(info->zs_channel, 9, 0); + + /* + * Clear the receive FIFO. + */ + ZS_CLEARFIFO(info->zs_channel); + info->xmit_fifo_size = 1; + + /* + * Reset DMAs + */ + if (info->has_dma) + dma_init(info); + + /* + * Clear the interrupt registers. + */ + write_zsreg(info->zs_channel, 0, ERR_RES); + write_zsreg(info->zs_channel, 0, RES_H_IUS); + + /* + * Turn on RTS and DTR. + */ + if (!info->is_irda) + zs_rtsdtr(info, 1); + + /* + * Finally, enable sequencing and interrupts + */ + if (!info->dma_initted) { + /* interrupt on ext/status changes, all received chars, + transmit ready */ + info->curregs[1] = (info->curregs[1] & ~0x18) + | (EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB); + } else { + /* interrupt on ext/status changes, W/Req pin is + receive DMA request */ + info->curregs[1] = (info->curregs[1] & ~(0x18 | TxINT_ENAB)) + | (EXT_INT_ENAB | WT_RDY_RT | WT_FN_RDYFN); + write_zsreg(info->zs_channel, 1, info->curregs[1]); + /* enable W/Req pin */ + info->curregs[1] |= WT_RDY_ENAB; + write_zsreg(info->zs_channel, 1, info->curregs[1]); + /* enable interrupts on transmit ready and receive errors */ + info->curregs[1] |= INT_ERR_Rx | TxINT_ENAB; + } + info->pendregs[1] = info->curregs[1]; + info->curregs[3] |= (RxENABLE | Rx8); + info->pendregs[3] = info->curregs[3]; + info->curregs[5] |= (TxENAB | Tx8); + info->pendregs[5] = info->curregs[5]; + info->curregs[9] |= (NV | MIE); + info->pendregs[9] = info->curregs[9]; + write_zsreg(info->zs_channel, 3, info->curregs[3]); + write_zsreg(info->zs_channel, 5, info->curregs[5]); + write_zsreg(info->zs_channel, 9, info->curregs[9]); + + if (info->tty) + clear_bit(TTY_IO_ERROR, &info->tty->flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + + spin_unlock_irqrestore(&info->lock, flags); + + /* + * Set the speed of the serial port + */ + change_speed(info, 0); + + /* Save the current value of RR0 */ + info->read_reg_zero = read_zsreg(info->zs_channel, 0); + + if (info->dma_initted) { + spin_lock_irqsave(&info->rx_dma_lock, flags); + rxdma_start(info, 0); + info->poll_dma_timer.expires = RX_DMA_TIMER; + add_timer(&info->poll_dma_timer); + spin_unlock_irqrestore(&info->rx_dma_lock, flags); + } + + return 0; +} + +/* + * This routine will shutdown a serial port; interrupts are disabled, and + * DTR is dropped if the hangup on close termio flag is on. + */ +static void shutdown(struct mac_serial * info) +{ + OPNDBG("Shutting down serial port %d (irq %d)....\n", info->line, + info->irq); + + if (!(info->flags & ZILOG_INITIALIZED)) { + OPNDBG("(already shutdown)\n"); + return; + } + + if (info->has_dma) { + del_timer(&info->poll_dma_timer); + dbdma_reset(info->tx_dma); + dbdma_reset(&info->rx->dma); + disable_irq(info->tx_dma_irq); + disable_irq(info->rx_dma_irq); + } + disable_irq(info->irq); + + info->pendregs[1] = info->curregs[1] = 0; + write_zsreg(info->zs_channel, 1, 0); /* no interrupts */ + + info->curregs[3] &= ~RxENABLE; + info->pendregs[3] = info->curregs[3]; + write_zsreg(info->zs_channel, 3, info->curregs[3]); + + info->curregs[5] &= ~TxENAB; + if (!info->tty || C_HUPCL(info->tty)) + info->curregs[5] &= ~DTR; + info->pendregs[5] = info->curregs[5]; + write_zsreg(info->zs_channel, 5, info->curregs[5]); + + if (info->tty) + set_bit(TTY_IO_ERROR, &info->tty->flags); + + set_scc_power(info, 0); + + if (info->xmit_buf) { + free_page((unsigned long) info->xmit_buf); + info->xmit_buf = 0; + } + + if (info->has_dma && info->dma_priv) { + kfree(info->dma_priv); + info->dma_priv = NULL; + info->dma_initted = 0; + } + + memset(info->curregs, 0, sizeof(info->curregs)); + memset(info->pendregs, 0, sizeof(info->pendregs)); + + info->flags &= ~ZILOG_INITIALIZED; +} + +/* + * Turn power on or off to the SCC and associated stuff + * (port drivers, modem, IR port, etc.) + * Returns the number of milliseconds we should wait before + * trying to use the port. + */ +static int set_scc_power(struct mac_serial * info, int state) +{ + int delay = 0; + + if (state) { + PWRDBG("ttyS%d: powering up hardware\n", info->line); + pmac_call_feature( + PMAC_FTR_SCC_ENABLE, + info->dev_node, info->port_type, 1); + if (info->is_internal_modem) { + pmac_call_feature( + PMAC_FTR_MODEM_ENABLE, + info->dev_node, 0, 1); + delay = 2500; /* wait for 2.5s before using */ + } else if (info->is_irda) + mdelay(50); /* Do better here once the problems + * with blocking have been ironed out + */ + } else { + /* TODO: Make that depend on a timer, don't power down + * immediately + */ + PWRDBG("ttyS%d: shutting down hardware\n", info->line); + if (info->is_internal_modem) { + PWRDBG("ttyS%d: shutting down modem\n", info->line); + pmac_call_feature( + PMAC_FTR_MODEM_ENABLE, + info->dev_node, 0, 0); + } + pmac_call_feature( + PMAC_FTR_SCC_ENABLE, + info->dev_node, info->port_type, 0); + } + return delay; +} + +static void irda_rts_pulses(struct mac_serial *info, int w) +{ + udelay(w); + write_zsreg(info->zs_channel, 5, Tx8 | TxENAB); + udelay(2); + write_zsreg(info->zs_channel, 5, Tx8 | TxENAB | RTS); + udelay(8); + write_zsreg(info->zs_channel, 5, Tx8 | TxENAB); + udelay(4); + write_zsreg(info->zs_channel, 5, Tx8 | TxENAB | RTS); +} + +/* + * Set the irda codec on the imac to the specified baud rate. + */ +static void irda_setup(struct mac_serial *info) +{ + int code, speed, t; + + speed = info->tty->termios->c_cflag & CBAUD; + if (speed < B2400 || speed > B115200) + return; + code = 0x4d + B115200 - speed; + + /* disable serial interrupts and receive DMA */ + write_zsreg(info->zs_channel, 1, info->curregs[1] & ~0x9f); + + /* wait for transmitter to drain */ + t = 10000; + while ((read_zsreg(info->zs_channel, 0) & Tx_BUF_EMP) == 0 + || (read_zsreg(info->zs_channel, 1) & ALL_SNT) == 0) { + if (--t <= 0) { + printk(KERN_ERR "transmitter didn't drain\n"); + return; + } + udelay(10); + } + udelay(100); + + /* set to 8 bits, no parity, 19200 baud, RTS on, DTR off */ + write_zsreg(info->zs_channel, 4, X16CLK | SB1); + write_zsreg(info->zs_channel, 11, TCBR | RCBR); + t = BPS_TO_BRG(19200, ZS_CLOCK/16); + write_zsreg(info->zs_channel, 12, t); + write_zsreg(info->zs_channel, 13, t >> 8); + write_zsreg(info->zs_channel, 14, BRENABL); + write_zsreg(info->zs_channel, 3, Rx8 | RxENABLE); + write_zsreg(info->zs_channel, 5, Tx8 | TxENAB | RTS); + + /* set TxD low for ~104us and pulse RTS */ + udelay(1000); + write_zsdata(info->zs_channel, 0xfe); + irda_rts_pulses(info, 150); + irda_rts_pulses(info, 180); + irda_rts_pulses(info, 50); + udelay(100); + + /* assert DTR, wait 30ms, talk to the chip */ + write_zsreg(info->zs_channel, 5, Tx8 | TxENAB | RTS | DTR); + mdelay(30); + while (read_zsreg(info->zs_channel, 0) & Rx_CH_AV) + read_zsdata(info->zs_channel); + + write_zsdata(info->zs_channel, 1); + t = 1000; + while ((read_zsreg(info->zs_channel, 0) & Rx_CH_AV) == 0) { + if (--t <= 0) { + printk(KERN_ERR "irda_setup timed out on 1st byte\n"); + goto out; + } + udelay(10); + } + t = read_zsdata(info->zs_channel); + if (t != 4) + printk(KERN_ERR "irda_setup 1st byte = %x\n", t); + + write_zsdata(info->zs_channel, code); + t = 1000; + while ((read_zsreg(info->zs_channel, 0) & Rx_CH_AV) == 0) { + if (--t <= 0) { + printk(KERN_ERR "irda_setup timed out on 2nd byte\n"); + goto out; + } + udelay(10); + } + t = read_zsdata(info->zs_channel); + if (t != code) + printk(KERN_ERR "irda_setup 2nd byte = %x (%x)\n", t, code); + + /* Drop DTR again and do some more RTS pulses */ + out: + udelay(100); + write_zsreg(info->zs_channel, 5, Tx8 | TxENAB | RTS); + irda_rts_pulses(info, 80); + + /* We should be right to go now. We assume that load_zsregs + will get called soon to load up the correct baud rate etc. */ + info->curregs[5] = (info->curregs[5] | RTS) & ~DTR; + info->pendregs[5] = info->curregs[5]; +} + +/* + * This routine is called to set the UART divisor registers to match + * the specified baud rate for a serial port. + */ +static void change_speed(struct mac_serial *info, struct termios *old_termios) +{ + unsigned cflag; + int bits; + int brg, baud; + unsigned long flags; + + if (!info->tty || !info->tty->termios) + return; + + cflag = info->tty->termios->c_cflag; + baud = tty_get_baud_rate(info->tty); + if (baud == 0) { + if (old_termios) { + info->tty->termios->c_cflag &= ~CBAUD; + info->tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD); + cflag = info->tty->termios->c_cflag; + baud = tty_get_baud_rate(info->tty); + } + else + baud = info->zs_baud; + } + if (baud > 230400) + baud = 230400; + else if (baud == 0) + baud = 38400; + + spin_lock_irqsave(&info->lock, flags); + info->zs_baud = baud; + info->clk_divisor = 16; + + BAUDBG(KERN_DEBUG "set speed to %d bds, ", baud); + + switch (baud) { + case ZS_CLOCK/16: /* 230400 */ + info->curregs[4] = X16CLK; + info->curregs[11] = 0; + break; + case ZS_CLOCK/32: /* 115200 */ + info->curregs[4] = X32CLK; + info->curregs[11] = 0; + break; + default: + info->curregs[4] = X16CLK; + info->curregs[11] = TCBR | RCBR; + brg = BPS_TO_BRG(baud, ZS_CLOCK/info->clk_divisor); + info->curregs[12] = (brg & 255); + info->curregs[13] = ((brg >> 8) & 255); + info->curregs[14] = BRENABL; + } + + /* byte size and parity */ + info->curregs[3] &= ~RxNBITS_MASK; + info->curregs[5] &= ~TxNBITS_MASK; + switch (cflag & CSIZE) { + case CS5: + info->curregs[3] |= Rx5; + info->curregs[5] |= Tx5; + BAUDBG("5 bits, "); + bits = 7; + break; + case CS6: + info->curregs[3] |= Rx6; + info->curregs[5] |= Tx6; + BAUDBG("6 bits, "); + bits = 8; + break; + case CS7: + info->curregs[3] |= Rx7; + info->curregs[5] |= Tx7; + BAUDBG("7 bits, "); + bits = 9; + break; + case CS8: + default: /* defaults to 8 bits */ + info->curregs[3] |= Rx8; + info->curregs[5] |= Tx8; + BAUDBG("8 bits, "); + bits = 10; + break; + } + info->pendregs[3] = info->curregs[3]; + info->pendregs[5] = info->curregs[5]; + + info->curregs[4] &= ~(SB_MASK | PAR_ENA | PAR_EVEN); + if (cflag & CSTOPB) { + info->curregs[4] |= SB2; + bits++; + BAUDBG("2 stop, "); + } else { + info->curregs[4] |= SB1; + BAUDBG("1 stop, "); + } + if (cflag & PARENB) { + bits++; + info->curregs[4] |= PAR_ENA; + BAUDBG("parity, "); + } + if (!(cflag & PARODD)) { + info->curregs[4] |= PAR_EVEN; + } + info->pendregs[4] = info->curregs[4]; + + if (!(cflag & CLOCAL)) { + if (!(info->curregs[15] & DCDIE)) + info->read_reg_zero = read_zsreg(info->zs_channel, 0); + info->curregs[15] |= DCDIE; + } else + info->curregs[15] &= ~DCDIE; + if (cflag & CRTSCTS) { + info->curregs[15] |= CTSIE; + if ((read_zsreg(info->zs_channel, 0) & CTS) != 0) + info->tx_stopped = 1; + } else { + info->curregs[15] &= ~CTSIE; + info->tx_stopped = 0; + } + info->pendregs[15] = info->curregs[15]; + + /* Calc timeout value. This is pretty broken with high baud rates with HZ=100. + This code would love a larger HZ and a >1 fifo size, but this is not + a priority. The resulting value must be >HZ/2 + */ + info->timeout = ((info->xmit_fifo_size*HZ*bits) / baud); + info->timeout += HZ/50+1; /* Add .02 seconds of slop */ + + BAUDBG("timeout=%d/%ds, base:%d\n", (int)info->timeout, (int)HZ, + (int)info->baud_base); + + /* set the irda codec to the right rate */ + if (info->is_irda) + irda_setup(info); + + /* Load up the new values */ + load_zsregs(info->zs_channel, info->curregs); + + spin_unlock_irqrestore(&info->lock, flags); +} + +static void rs_flush_chars(struct tty_struct *tty) +{ + struct mac_serial *info = (struct mac_serial *)tty->driver_data; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_flush_chars")) + return; + + spin_lock_irqsave(&info->lock, flags); + if (!(info->xmit_cnt <= 0 || tty->stopped || info->tx_stopped || + !info->xmit_buf)) + /* Enable transmitter */ + transmit_chars(info); + spin_unlock_irqrestore(&info->lock, flags); +} + +static int rs_write(struct tty_struct * tty, + const unsigned char *buf, int count) +{ + int c, ret = 0; + struct mac_serial *info = (struct mac_serial *)tty->driver_data; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_write")) + return 0; + + if (!tty || !info->xmit_buf || !tmp_buf) + return 0; + + while (1) { + spin_lock_irqsave(&info->lock, flags); + c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, + SERIAL_XMIT_SIZE - info->xmit_head)); + if (c <= 0) { + spin_unlock_irqrestore(&info->lock, flags); + break; + } + memcpy(info->xmit_buf + info->xmit_head, buf, c); + info->xmit_head = ((info->xmit_head + c) & + (SERIAL_XMIT_SIZE-1)); + info->xmit_cnt += c; + spin_unlock_irqrestore(&info->lock, flags); + buf += c; + count -= c; + ret += c; + } + spin_lock_irqsave(&info->lock, flags); + if (info->xmit_cnt && !tty->stopped && !info->tx_stopped + && !info->tx_active) + transmit_chars(info); + spin_unlock_irqrestore(&info->lock, flags); + return ret; +} + +static int rs_write_room(struct tty_struct *tty) +{ + struct mac_serial *info = (struct mac_serial *)tty->driver_data; + int ret; + + if (serial_paranoia_check(info, tty->name, "rs_write_room")) + return 0; + ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; + if (ret < 0) + ret = 0; + return ret; +} + +static int rs_chars_in_buffer(struct tty_struct *tty) +{ + struct mac_serial *info = (struct mac_serial *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer")) + return 0; + return info->xmit_cnt; +} + +static void rs_flush_buffer(struct tty_struct *tty) +{ + struct mac_serial *info = (struct mac_serial *)tty->driver_data; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_flush_buffer")) + return; + spin_lock_irqsave(&info->lock, flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + spin_unlock_irqrestore(&info->lock, flags); + tty_wakeup(tty); +} + +/* + * ------------------------------------------------------------ + * rs_throttle() + * + * This routine is called by the upper-layer tty layer to signal that + * incoming characters should be throttled. + * ------------------------------------------------------------ + */ +static void rs_throttle(struct tty_struct * tty) +{ + struct mac_serial *info = (struct mac_serial *)tty->driver_data; + unsigned long flags; +#ifdef SERIAL_DEBUG_THROTTLE + printk(KERN_DEBUG "throttle %ld....\n",tty->ldisc.chars_in_buffer(tty)); +#endif + + if (serial_paranoia_check(info, tty->name, "rs_throttle")) + return; + + if (I_IXOFF(tty)) { + spin_lock_irqsave(&info->lock, flags); + info->x_char = STOP_CHAR(tty); + if (!info->tx_active) + transmit_chars(info); + spin_unlock_irqrestore(&info->lock, flags); + } + + if (C_CRTSCTS(tty)) { + /* + * Here we want to turn off the RTS line. On Macintoshes, + * the external serial ports using a DIN-8 or DIN-9 + * connector only have the DTR line (which is usually + * wired to both RTS and DTR on an external modem in + * the cable). RTS doesn't go out to the serial port + * socket, it acts as an output enable for the transmit + * data line. So in this case we don't drop RTS. + * + * Macs with internal modems generally do have both RTS + * and DTR wired to the modem, so in that case we do + * drop RTS. + */ + if (info->is_internal_modem) { + spin_lock_irqsave(&info->lock, flags); + info->curregs[5] &= ~RTS; + info->pendregs[5] &= ~RTS; + write_zsreg(info->zs_channel, 5, info->curregs[5]); + spin_unlock_irqrestore(&info->lock, flags); + } + } + +#ifdef CDTRCTS + if (tty->termios->c_cflag & CDTRCTS) { + spin_lock_irqsave(&info->lock, flags); + info->curregs[5] &= ~DTR; + info->pendregs[5] &= ~DTR; + write_zsreg(info->zs_channel, 5, info->curregs[5]); + spin_unlock_irqrestore(&info->lock, flags); + } +#endif /* CDTRCTS */ +} + +static void rs_unthrottle(struct tty_struct * tty) +{ + struct mac_serial *info = (struct mac_serial *)tty->driver_data; + unsigned long flags; +#ifdef SERIAL_DEBUG_THROTTLE + printk(KERN_DEBUG "unthrottle %s: %d....\n", + tty->ldisc.chars_in_buffer(tty)); +#endif + + if (serial_paranoia_check(info, tty->name, "rs_unthrottle")) + return; + + if (I_IXOFF(tty)) { + spin_lock_irqsave(&info->lock, flags); + if (info->x_char) + info->x_char = 0; + else { + info->x_char = START_CHAR(tty); + if (!info->tx_active) + transmit_chars(info); + } + spin_unlock_irqrestore(&info->lock, flags); + } + + if (C_CRTSCTS(tty) && info->is_internal_modem) { + /* Assert RTS line */ + spin_lock_irqsave(&info->lock, flags); + info->curregs[5] |= RTS; + info->pendregs[5] |= RTS; + write_zsreg(info->zs_channel, 5, info->curregs[5]); + spin_unlock_irqrestore(&info->lock, flags); + } + +#ifdef CDTRCTS + if (tty->termios->c_cflag & CDTRCTS) { + /* Assert DTR line */ + spin_lock_irqsave(&info->lock, flags); + info->curregs[5] |= DTR; + info->pendregs[5] |= DTR; + write_zsreg(info->zs_channel, 5, info->curregs[5]); + spin_unlock_irqrestore(&info->lock, flags); + } +#endif +} + +/* + * ------------------------------------------------------------ + * rs_ioctl() and friends + * ------------------------------------------------------------ + */ + +static int get_serial_info(struct mac_serial * info, + struct serial_struct __user * retinfo) +{ + struct serial_struct tmp; + + if (!retinfo) + return -EFAULT; + memset(&tmp, 0, sizeof(tmp)); + tmp.type = info->type; + tmp.line = info->line; + tmp.port = info->port; + tmp.irq = info->irq; + tmp.flags = info->flags; + tmp.baud_base = info->baud_base; + tmp.close_delay = info->close_delay; + tmp.closing_wait = info->closing_wait; + tmp.custom_divisor = info->custom_divisor; + if (copy_to_user(retinfo,&tmp,sizeof(*retinfo))) + return -EFAULT; + return 0; +} + +static int set_serial_info(struct mac_serial * info, + struct serial_struct __user * new_info) +{ + struct serial_struct new_serial; + struct mac_serial old_info; + int retval = 0; + + if (copy_from_user(&new_serial,new_info,sizeof(new_serial))) + return -EFAULT; + old_info = *info; + + if (!capable(CAP_SYS_ADMIN)) { + if ((new_serial.baud_base != info->baud_base) || + (new_serial.type != info->type) || + (new_serial.close_delay != info->close_delay) || + ((new_serial.flags & ~ZILOG_USR_MASK) != + (info->flags & ~ZILOG_USR_MASK))) + return -EPERM; + info->flags = ((info->flags & ~ZILOG_USR_MASK) | + (new_serial.flags & ZILOG_USR_MASK)); + info->custom_divisor = new_serial.custom_divisor; + goto check_and_exit; + } + + if (info->count > 1) + return -EBUSY; + + /* + * OK, past this point, all the error checking has been done. + * At this point, we start making changes..... + */ + + info->baud_base = new_serial.baud_base; + info->flags = ((info->flags & ~ZILOG_FLAGS) | + (new_serial.flags & ZILOG_FLAGS)); + info->type = new_serial.type; + info->close_delay = new_serial.close_delay; + info->closing_wait = new_serial.closing_wait; + +check_and_exit: + if (info->flags & ZILOG_INITIALIZED) + retval = setup_scc(info); + return retval; +} + +/* + * get_lsr_info - get line status register info + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + */ +static int get_lsr_info(struct mac_serial * info, unsigned int *value) +{ + unsigned char status; + unsigned long flags; + + spin_lock_irqsave(&info->lock, flags); + status = read_zsreg(info->zs_channel, 0); + spin_unlock_irqrestore(&info->lock, flags); + status = (status & Tx_BUF_EMP)? TIOCSER_TEMT: 0; + return put_user(status,value); +} + +static int rs_tiocmget(struct tty_struct *tty, struct file *file) +{ + struct mac_serial * info = (struct mac_serial *)tty->driver_data; + unsigned char control, status; + unsigned long flags; + +#ifdef CONFIG_KGDB + if (info->kgdb_channel) + return -ENODEV; +#endif + if (serial_paranoia_check(info, tty->name, __FUNCTION__)) + return -ENODEV; + + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + + spin_lock_irqsave(&info->lock, flags); + control = info->curregs[5]; + status = read_zsreg(info->zs_channel, 0); + spin_unlock_irqrestore(&info->lock, flags); + return ((control & RTS) ? TIOCM_RTS: 0) + | ((control & DTR) ? TIOCM_DTR: 0) + | ((status & DCD) ? TIOCM_CAR: 0) + | ((status & CTS) ? 0: TIOCM_CTS); +} + +static int rs_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ + struct mac_serial * info = (struct mac_serial *)tty->driver_data; + unsigned int arg, bits; + unsigned long flags; + +#ifdef CONFIG_KGDB + if (info->kgdb_channel) + return -ENODEV; +#endif + if (serial_paranoia_check(info, tty->name, __FUNCTION__)) + return -ENODEV; + + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + + spin_lock_irqsave(&info->lock, flags); + if (set & TIOCM_RTS) + info->curregs[5] |= RTS; + if (set & TIOCM_DTR) + info->curregs[5] |= DTR; + if (clear & TIOCM_RTS) + info->curregs[5] &= ~RTS; + if (clear & TIOCM_DTR) + info->curregs[5] &= ~DTR; + + info->pendregs[5] = info->curregs[5]; + write_zsreg(info->zs_channel, 5, info->curregs[5]); + spin_unlock_irqrestore(&info->lock, flags); + return 0; +} + +/* + * rs_break - turn transmit break condition on/off + */ +static void rs_break(struct tty_struct *tty, int break_state) +{ + struct mac_serial *info = (struct mac_serial *) tty->driver_data; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_break")) + return; + + spin_lock_irqsave(&info->lock, flags); + if (break_state == -1) + info->curregs[5] |= SND_BRK; + else + info->curregs[5] &= ~SND_BRK; + write_zsreg(info->zs_channel, 5, info->curregs[5]); + spin_unlock_irqrestore(&info->lock, flags); +} + +static int rs_ioctl(struct tty_struct *tty, struct file * file, + unsigned int cmd, unsigned long arg) +{ + struct mac_serial * info = (struct mac_serial *)tty->driver_data; + +#ifdef CONFIG_KGDB + if (info->kgdb_channel) + return -ENODEV; +#endif + if (serial_paranoia_check(info, tty->name, "rs_ioctl")) + return -ENODEV; + + if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && + (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT)) { + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + } + + switch (cmd) { + case TIOCGSERIAL: + return get_serial_info(info, + (struct serial_struct __user *) arg); + case TIOCSSERIAL: + return set_serial_info(info, + (struct serial_struct __user *) arg); + case TIOCSERGETLSR: /* Get line status register */ + return get_lsr_info(info, (unsigned int *) arg); + + case TIOCSERGSTRUCT: + if (copy_to_user((struct mac_serial __user *) arg, + info, sizeof(struct mac_serial))) + return -EFAULT; + return 0; + + default: + return -ENOIOCTLCMD; + } + return 0; +} + +static void rs_set_termios(struct tty_struct *tty, struct termios *old_termios) +{ + struct mac_serial *info = (struct mac_serial *)tty->driver_data; + int was_stopped; + + if (tty->termios->c_cflag == old_termios->c_cflag) + return; + was_stopped = info->tx_stopped; + + change_speed(info, old_termios); + + if (was_stopped && !info->tx_stopped) { + tty->hw_stopped = 0; + rs_start(tty); + } +} + +/* + * ------------------------------------------------------------ + * rs_close() + * + * This routine is called when the serial port gets closed. + * Wait for the last remaining data to be sent. + * ------------------------------------------------------------ + */ +static void rs_close(struct tty_struct *tty, struct file * filp) +{ + struct mac_serial * info = (struct mac_serial *)tty->driver_data; + unsigned long flags; + + if (!info || serial_paranoia_check(info, tty->name, "rs_close")) + return; + + spin_lock_irqsave(&info->lock, flags); + + if (tty_hung_up_p(filp)) { + spin_unlock_irqrestore(&info->lock, flags); + return; + } + + OPNDBG("rs_close ttyS%d, count = %d\n", info->line, info->count); + if ((tty->count == 1) && (info->count != 1)) { + /* + * Uh, oh. tty->count is 1, which means that the tty + * structure will be freed. Info->count should always + * be one in these conditions. If it's greater than + * one, we've got real problems, since it means the + * serial port won't be shutdown. + */ + printk(KERN_ERR "rs_close: bad serial port count; tty->count " + "is 1, info->count is %d\n", info->count); + info->count = 1; + } + if (--info->count < 0) { + printk(KERN_ERR "rs_close: bad serial port count for " + "ttyS%d: %d\n", info->line, info->count); + info->count = 0; + } + if (info->count) { + spin_unlock_irqrestore(&info->lock, flags); + return; + } + info->flags |= ZILOG_CLOSING; + /* + * Now we wait for the transmit buffer to clear; and we notify + * the line discipline to only process XON/XOFF characters. + */ + OPNDBG("waiting end of Tx... (timeout:%d)\n", info->closing_wait); + tty->closing = 1; + if (info->closing_wait != ZILOG_CLOSING_WAIT_NONE) { + spin_unlock_irqrestore(&info->lock, flags); + tty_wait_until_sent(tty, info->closing_wait); + spin_lock_irqsave(&info->lock, flags); + } + + /* + * At this point we stop accepting input. To do this, we + * disable the receiver and receive interrupts. + */ + info->curregs[3] &= ~RxENABLE; + info->pendregs[3] = info->curregs[3]; + write_zsreg(info->zs_channel, 3, info->curregs[3]); + info->curregs[1] &= ~(0x18); /* disable any rx ints */ + info->pendregs[1] = info->curregs[1]; + write_zsreg(info->zs_channel, 1, info->curregs[1]); + ZS_CLEARFIFO(info->zs_channel); + if (info->flags & ZILOG_INITIALIZED) { + /* + * Before we drop DTR, make sure the SCC transmitter + * has completely drained. + */ + OPNDBG("waiting end of Rx...\n"); + spin_unlock_irqrestore(&info->lock, flags); + rs_wait_until_sent(tty, info->timeout); + spin_lock_irqsave(&info->lock, flags); + } + + shutdown(info); + /* restore flags now since shutdown() will have disabled this port's + specific irqs */ + spin_unlock_irqrestore(&info->lock, flags); + + if (tty->driver->flush_buffer) + tty->driver->flush_buffer(tty); + tty_ldisc_flush(tty); + tty->closing = 0; + info->event = 0; + info->tty = 0; + + if (info->blocked_open) { + if (info->close_delay) { + msleep_interruptible(jiffies_to_msecs(info->close_delay)); + } + wake_up_interruptible(&info->open_wait); + } + info->flags &= ~(ZILOG_NORMAL_ACTIVE|ZILOG_CLOSING); + wake_up_interruptible(&info->close_wait); +} + +/* + * rs_wait_until_sent() --- wait until the transmitter is empty + */ +static void rs_wait_until_sent(struct tty_struct *tty, int timeout) +{ + struct mac_serial *info = (struct mac_serial *) tty->driver_data; + unsigned long orig_jiffies, char_time; + + if (serial_paranoia_check(info, tty->name, "rs_wait_until_sent")) + return; + +/* printk("rs_wait_until_sent, timeout:%d, tty_stopped:%d, tx_stopped:%d\n", + timeout, tty->stopped, info->tx_stopped); +*/ + orig_jiffies = jiffies; + /* + * Set the check interval to be 1/5 of the estimated time to + * send a single character, and make it at least 1. The check + * interval should also be less than the timeout. + */ + if (info->timeout <= HZ/50) { + printk(KERN_INFO "macserial: invalid info->timeout=%d\n", + info->timeout); + info->timeout = HZ/50+1; + } + + char_time = (info->timeout - HZ/50) / info->xmit_fifo_size; + char_time = char_time / 5; + if (char_time > HZ) { + printk(KERN_WARNING "macserial: char_time %ld >HZ !!!\n", + char_time); + char_time = 1; + } else if (char_time == 0) + char_time = 1; + if (timeout) + char_time = min_t(unsigned long, char_time, timeout); + while ((read_zsreg(info->zs_channel, 1) & ALL_SNT) == 0) { + msleep_interruptible(jiffies_to_msecs(char_time)); + if (signal_pending(current)) + break; + if (timeout && time_after(jiffies, orig_jiffies + timeout)) + break; + } + current->state = TASK_RUNNING; +} + +/* + * rs_hangup() --- called by tty_hangup() when a hangup is signaled. + */ +static void rs_hangup(struct tty_struct *tty) +{ + struct mac_serial * info = (struct mac_serial *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_hangup")) + return; + + rs_flush_buffer(tty); + shutdown(info); + info->event = 0; + info->count = 0; + info->flags &= ~ZILOG_NORMAL_ACTIVE; + info->tty = 0; + wake_up_interruptible(&info->open_wait); +} + +/* + * ------------------------------------------------------------ + * rs_open() and friends + * ------------------------------------------------------------ + */ +static int block_til_ready(struct tty_struct *tty, struct file * filp, + struct mac_serial *info) +{ + DECLARE_WAITQUEUE(wait,current); + int retval; + int do_clocal = 0; + + /* + * If the device is in the middle of being closed, then block + * until it's done, and then try again. + */ + if (info->flags & ZILOG_CLOSING) { + interruptible_sleep_on(&info->close_wait); + return -EAGAIN; + } + + /* + * If non-blocking mode is set, or the port is not enabled, + * then make the check up front and then exit. + */ + if ((filp->f_flags & O_NONBLOCK) || + (tty->flags & (1 << TTY_IO_ERROR))) { + info->flags |= ZILOG_NORMAL_ACTIVE; + return 0; + } + + if (tty->termios->c_cflag & CLOCAL) + do_clocal = 1; + + /* + * Block waiting for the carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, info->count is dropped by one, so that + * rs_close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + retval = 0; + add_wait_queue(&info->open_wait, &wait); + OPNDBG("block_til_ready before block: ttyS%d, count = %d\n", + info->line, info->count); + spin_lock_irq(&info->lock); + if (!tty_hung_up_p(filp)) + info->count--; + spin_unlock_irq(&info->lock); + info->blocked_open++; + while (1) { + spin_lock_irq(&info->lock); + if ((tty->termios->c_cflag & CBAUD) && + !info->is_irda) + zs_rtsdtr(info, 1); + spin_unlock_irq(&info->lock); + set_current_state(TASK_INTERRUPTIBLE); + if (tty_hung_up_p(filp) || + !(info->flags & ZILOG_INITIALIZED)) { + retval = -EAGAIN; + break; + } + if (!(info->flags & ZILOG_CLOSING) && + (do_clocal || (read_zsreg(info->zs_channel, 0) & DCD))) + break; + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + OPNDBG("block_til_ready blocking: ttyS%d, count = %d\n", + info->line, info->count); + schedule(); + } + current->state = TASK_RUNNING; + remove_wait_queue(&info->open_wait, &wait); + if (!tty_hung_up_p(filp)) + info->count++; + info->blocked_open--; + OPNDBG("block_til_ready after blocking: ttyS%d, count = %d\n", + info->line, info->count); + if (retval) + return retval; + info->flags |= ZILOG_NORMAL_ACTIVE; + return 0; +} + +/* + * This routine is called whenever a serial port is opened. It + * enables interrupts for a serial port, linking in its ZILOG structure into + * the IRQ chain. It also performs the serial-specific + * initialization for the tty structure. + */ +static int rs_open(struct tty_struct *tty, struct file * filp) +{ + struct mac_serial *info; + int retval, line; + unsigned long page; + + line = tty->index; + if ((line < 0) || (line >= zs_channels_found)) { + return -ENODEV; + } + info = zs_soft + line; + +#ifdef CONFIG_KGDB + if (info->kgdb_channel) { + return -ENODEV; + } +#endif + if (serial_paranoia_check(info, tty->name, "rs_open")) + return -ENODEV; + OPNDBG("rs_open %s, count = %d, tty=%p\n", tty->name, + info->count, tty); + + info->count++; + tty->driver_data = info; + info->tty = tty; + + if (!tmp_buf) { + page = get_zeroed_page(GFP_KERNEL); + if (!page) + return -ENOMEM; + if (tmp_buf) + free_page(page); + else + tmp_buf = (unsigned char *) page; + } + + /* + * If the port is the middle of closing, bail out now + */ + if (tty_hung_up_p(filp) || + (info->flags & ZILOG_CLOSING)) { + if (info->flags & ZILOG_CLOSING) + interruptible_sleep_on(&info->close_wait); + return -EAGAIN; + } + + /* + * Start up serial port + */ + + retval = startup(info); + if (retval) + return retval; + + retval = block_til_ready(tty, filp, info); + if (retval) { + OPNDBG("rs_open returning after block_til_ready with %d\n", + retval); + return retval; + } + +#ifdef CONFIG_SERIAL_CONSOLE + if (sercons.cflag && sercons.index == line) { + tty->termios->c_cflag = sercons.cflag; + sercons.cflag = 0; + change_speed(info, 0); + } +#endif + + OPNDBG("rs_open %s successful...\n", tty->name); + return 0; +} + +/* Finally, routines used to initialize the serial driver. */ + +static void show_serial_version(void) +{ + printk(KERN_INFO "PowerMac Z8530 serial driver version " MACSERIAL_VERSION "\n"); +} + +/* + * Initialize one channel, both the mac_serial and mac_zschannel + * structs. We use the dev_node field of the mac_serial struct. + */ +static int +chan_init(struct mac_serial *zss, struct mac_zschannel *zs_chan, + struct mac_zschannel *zs_chan_a) +{ + struct device_node *ch = zss->dev_node; + char *conn; + int len; + struct slot_names_prop { + int count; + char name[1]; + } *slots; + + zss->irq = ch->intrs[0].line; + zss->has_dma = 0; +#if !defined(CONFIG_KGDB) && defined(SUPPORT_SERIAL_DMA) + if (ch->n_addrs >= 3 && ch->n_intrs == 3) + zss->has_dma = 1; +#endif + zss->dma_initted = 0; + + zs_chan->control = (volatile unsigned char *) + ioremap(ch->addrs[0].address, 0x1000); + zs_chan->data = zs_chan->control + 0x10; + spin_lock_init(&zs_chan->lock); + zs_chan->parent = zss; + zss->zs_channel = zs_chan; + zss->zs_chan_a = zs_chan_a; + + /* setup misc varariables */ + zss->kgdb_channel = 0; + + /* For now, we assume you either have a slot-names property + * with "Modem" in it, or your channel is compatible with + * "cobalt". Might need additional fixups + */ + zss->is_internal_modem = device_is_compatible(ch, "cobalt"); + conn = get_property(ch, "AAPL,connector", &len); + zss->is_irda = conn && (strcmp(conn, "infrared") == 0); + zss->port_type = PMAC_SCC_ASYNC; + /* 1999 Powerbook G3 has slot-names property instead */ + slots = (struct slot_names_prop *)get_property(ch, "slot-names", &len); + if (slots && slots->count > 0) { + if (strcmp(slots->name, "IrDA") == 0) + zss->is_irda = 1; + else if (strcmp(slots->name, "Modem") == 0) + zss->is_internal_modem = 1; + } + if (zss->is_irda) + zss->port_type = PMAC_SCC_IRDA; + if (zss->is_internal_modem) { + struct device_node* i2c_modem = find_devices("i2c-modem"); + if (i2c_modem) { + char* mid = get_property(i2c_modem, "modem-id", NULL); + if (mid) switch(*mid) { + case 0x04 : + case 0x05 : + case 0x07 : + case 0x08 : + case 0x0b : + case 0x0c : + zss->port_type = PMAC_SCC_I2S1; + } + printk(KERN_INFO "macserial: i2c-modem detected, id: %d\n", + mid ? (*mid) : 0); + } else { + printk(KERN_INFO "macserial: serial modem detected\n"); + } + } + + while (zss->has_dma) { + zss->dma_priv = NULL; + /* it seems that the last two addresses are the + DMA controllers */ + zss->tx_dma = (volatile struct dbdma_regs *) + ioremap(ch->addrs[ch->n_addrs - 2].address, 0x100); + zss->rx = (volatile struct mac_dma *) + ioremap(ch->addrs[ch->n_addrs - 1].address, 0x100); + zss->tx_dma_irq = ch->intrs[1].line; + zss->rx_dma_irq = ch->intrs[2].line; + spin_lock_init(&zss->rx_dma_lock); + break; + } + + init_timer(&zss->powerup_timer); + zss->powerup_timer.function = powerup_done; + zss->powerup_timer.data = (unsigned long) zss; + return 0; +} + +/* + * /proc fs routines. TODO: Add status lines & error stats + */ +static inline int +line_info(char *buf, struct mac_serial *info) +{ + int ret=0; + unsigned char* connector; + int lenp; + + ret += sprintf(buf, "%d: port:0x%X irq:%d", info->line, info->port, info->irq); + + connector = get_property(info->dev_node, "AAPL,connector", &lenp); + if (connector) + ret+=sprintf(buf+ret," con:%s ", connector); + if (info->is_internal_modem) { + if (!connector) + ret+=sprintf(buf+ret," con:"); + ret+=sprintf(buf+ret,"%s", " (internal modem)"); + } + if (info->is_irda) { + if (!connector) + ret+=sprintf(buf+ret," con:"); + ret+=sprintf(buf+ret,"%s", " (IrDA)"); + } + ret+=sprintf(buf+ret,"\n"); + + return ret; +} + +int macserial_read_proc(char *page, char **start, off_t off, int count, + int *eof, void *data) +{ + int l, len = 0; + off_t begin = 0; + struct mac_serial *info; + + len += sprintf(page, "serinfo:1.0 driver:" MACSERIAL_VERSION "\n"); + for (info = zs_chain; info && len < 4000; info = info->zs_next) { + l = line_info(page + len, info); + len += l; + if (len+begin > off+count) + goto done; + if (len+begin < off) { + begin += len; + len = 0; + } + } + *eof = 1; +done: + if (off >= len+begin) + return 0; + *start = page + (off-begin); + return ((count < begin+len-off) ? count : begin+len-off); +} + +/* Ask the PROM how many Z8530s we have and initialize their zs_channels */ +static void +probe_sccs(void) +{ + struct device_node *dev, *ch; + struct mac_serial **pp; + int n, chip, nchan; + struct mac_zschannel *zs_chan; + int chan_a_index; + + n = 0; + pp = &zs_chain; + zs_chan = zs_channels; + for (dev = find_devices("escc"); dev != 0; dev = dev->next) { + nchan = 0; + chip = n; + if (n >= NUM_CHANNELS) { + printk(KERN_WARNING "Sorry, can't use %s: no more " + "channels\n", dev->full_name); + continue; + } + chan_a_index = 0; + for (ch = dev->child; ch != 0; ch = ch->sibling) { + if (nchan >= 2) { + printk(KERN_WARNING "SCC: Only 2 channels per " + "chip are supported\n"); + break; + } + if (ch->n_addrs < 1 || (ch ->n_intrs < 1)) { + printk("Can't use %s: %d addrs %d intrs\n", + ch->full_name, ch->n_addrs, ch->n_intrs); + continue; + } + + /* The channel with the higher address + will be the A side. */ + if (nchan > 0 && + ch->addrs[0].address + > zs_soft[n-1].dev_node->addrs[0].address) + chan_a_index = 1; + + /* minimal initialization for now */ + zs_soft[n].dev_node = ch; + *pp = &zs_soft[n]; + pp = &zs_soft[n].zs_next; + ++nchan; + ++n; + } + if (nchan == 0) + continue; + + /* set up A side */ + if (chan_init(&zs_soft[chip + chan_a_index], zs_chan, zs_chan)) + continue; + ++zs_chan; + + /* set up B side, if it exists */ + if (nchan > 1) + if (chan_init(&zs_soft[chip + 1 - chan_a_index], + zs_chan, zs_chan - 1)) + continue; + ++zs_chan; + } + *pp = 0; + + zs_channels_found = n; +#ifdef CONFIG_PMAC_PBOOK + if (n) + pmu_register_sleep_notifier(&serial_sleep_notifier); +#endif /* CONFIG_PMAC_PBOOK */ +} + +static struct tty_operations serial_ops = { + .open = rs_open, + .close = rs_close, + .write = rs_write, + .flush_chars = rs_flush_chars, + .write_room = rs_write_room, + .chars_in_buffer = rs_chars_in_buffer, + .flush_buffer = rs_flush_buffer, + .ioctl = rs_ioctl, + .throttle = rs_throttle, + .unthrottle = rs_unthrottle, + .set_termios = rs_set_termios, + .stop = rs_stop, + .start = rs_start, + .hangup = rs_hangup, + .break_ctl = rs_break, + .wait_until_sent = rs_wait_until_sent, + .read_proc = macserial_read_proc, + .tiocmget = rs_tiocmget, + .tiocmset = rs_tiocmset, +}; + +static int macserial_init(void) +{ + int channel, i; + struct mac_serial *info; + + /* Find out how many Z8530 SCCs we have */ + if (zs_chain == 0) + probe_sccs(); + + serial_driver = alloc_tty_driver(zs_channels_found); + if (!serial_driver) + return -ENOMEM; + + /* XXX assume it's a powerbook if we have a via-pmu + * + * This is OK for core99 machines as well. + */ + is_powerbook = find_devices("via-pmu") != 0; + + /* Register the interrupt handler for each one + * We also request the OF resources here as probe_sccs() + * might be called too early for that + */ + for (i = 0; i < zs_channels_found; ++i) { + struct device_node* ch = zs_soft[i].dev_node; + if (!request_OF_resource(ch, 0, NULL)) { + printk(KERN_ERR "macserial: can't request IO resource !\n"); + put_tty_driver(serial_driver); + return -ENODEV; + } + if (zs_soft[i].has_dma) { + if (!request_OF_resource(ch, ch->n_addrs - 2, " (tx dma)")) { + printk(KERN_ERR "macserial: can't request TX DMA resource !\n"); + zs_soft[i].has_dma = 0; + goto no_dma; + } + if (!request_OF_resource(ch, ch->n_addrs - 1, " (rx dma)")) { + release_OF_resource(ch, ch->n_addrs - 2); + printk(KERN_ERR "macserial: can't request RX DMA resource !\n"); + zs_soft[i].has_dma = 0; + goto no_dma; + } + if (request_irq(zs_soft[i].tx_dma_irq, rs_txdma_irq, 0, + "SCC-txdma", &zs_soft[i])) + printk(KERN_ERR "macserial: can't get irq %d\n", + zs_soft[i].tx_dma_irq); + disable_irq(zs_soft[i].tx_dma_irq); + if (request_irq(zs_soft[i].rx_dma_irq, rs_rxdma_irq, 0, + "SCC-rxdma", &zs_soft[i])) + printk(KERN_ERR "macserial: can't get irq %d\n", + zs_soft[i].rx_dma_irq); + disable_irq(zs_soft[i].rx_dma_irq); + } +no_dma: + if (request_irq(zs_soft[i].irq, rs_interrupt, 0, + "SCC", &zs_soft[i])) + printk(KERN_ERR "macserial: can't get irq %d\n", + zs_soft[i].irq); + disable_irq(zs_soft[i].irq); + } + + show_serial_version(); + + /* Initialize the tty_driver structure */ + /* Not all of this is exactly right for us. */ + + serial_driver->owner = THIS_MODULE; + serial_driver->driver_name = "macserial"; + serial_driver->devfs_name = "tts/"; + serial_driver->name = "ttyS"; + serial_driver->major = TTY_MAJOR; + serial_driver->minor_start = 64; + serial_driver->type = TTY_DRIVER_TYPE_SERIAL; + serial_driver->subtype = SERIAL_TYPE_NORMAL; + serial_driver->init_termios = tty_std_termios; + serial_driver->init_termios.c_cflag = + B38400 | CS8 | CREAD | HUPCL | CLOCAL; + serial_driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(serial_driver, &serial_ops); + + if (tty_register_driver(serial_driver)) + printk(KERN_ERR "Error: couldn't register serial driver\n"); + + for (channel = 0; channel < zs_channels_found; ++channel) { +#ifdef CONFIG_KGDB + if (zs_soft[channel].kgdb_channel) { + kgdb_interruptible(1); + continue; + } +#endif + zs_soft[channel].clk_divisor = 16; +/* -- we are not sure the SCC is powered ON at this point + zs_soft[channel].zs_baud = get_zsbaud(&zs_soft[channel]); +*/ + zs_soft[channel].zs_baud = 38400; + + /* If console serial line, then enable interrupts. */ + if (zs_soft[channel].is_cons) { + printk(KERN_INFO "macserial: console line, enabling " + "interrupt %d\n", zs_soft[channel].irq); + panic("macserial: console not supported yet !"); + write_zsreg(zs_soft[channel].zs_channel, R1, + (EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB)); + write_zsreg(zs_soft[channel].zs_channel, R9, + (NV | MIE)); + } + } + + for (info = zs_chain, i = 0; info; info = info->zs_next, i++) + { + unsigned char* connector; + int lenp; + +#ifdef CONFIG_KGDB + if (info->kgdb_channel) { + continue; + } +#endif + info->magic = SERIAL_MAGIC; + info->port = (int) info->zs_channel->control; + info->line = i; + info->tty = 0; + info->custom_divisor = 16; + info->timeout = 0; + info->close_delay = 50; + info->closing_wait = 3000; + info->x_char = 0; + info->event = 0; + info->count = 0; + info->blocked_open = 0; + INIT_WORK(&info->tqueue, do_softint, info); + spin_lock_init(&info->lock); + init_waitqueue_head(&info->open_wait); + init_waitqueue_head(&info->close_wait); + info->timeout = HZ; + printk(KERN_INFO "tty%02d at 0x%08x (irq = %d)", info->line, + info->port, info->irq); + printk(" is a Z8530 ESCC"); + connector = get_property(info->dev_node, "AAPL,connector", &lenp); + if (connector) + printk(", port = %s", connector); + if (info->is_internal_modem) + printk(" (internal modem)"); + if (info->is_irda) + printk(" (IrDA)"); + printk("\n"); + } + tmp_buf = 0; + + return 0; +} + +void macserial_cleanup(void) +{ + int i; + unsigned long flags; + struct mac_serial *info; + + for (info = zs_chain, i = 0; info; info = info->zs_next, i++) + set_scc_power(info, 0); + spin_lock_irqsave(&info->lock, flags); + for (i = 0; i < zs_channels_found; ++i) { + free_irq(zs_soft[i].irq, &zs_soft[i]); + if (zs_soft[i].has_dma) { + free_irq(zs_soft[i].tx_dma_irq, &zs_soft[i]); + free_irq(zs_soft[i].rx_dma_irq, &zs_soft[i]); + } + release_OF_resource(zs_soft[i].dev_node, 0); + if (zs_soft[i].has_dma) { + struct device_node* ch = zs_soft[i].dev_node; + release_OF_resource(ch, ch->n_addrs - 2); + release_OF_resource(ch, ch->n_addrs - 1); + } + } + spin_unlock_irqrestore(&info->lock, flags); + tty_unregister_driver(serial_driver); + put_tty_driver(serial_driver); + + if (tmp_buf) { + free_page((unsigned long) tmp_buf); + tmp_buf = 0; + } + +#ifdef CONFIG_PMAC_PBOOK + if (zs_channels_found) + pmu_unregister_sleep_notifier(&serial_sleep_notifier); +#endif /* CONFIG_PMAC_PBOOK */ +} + +module_init(macserial_init); +module_exit(macserial_cleanup); +MODULE_LICENSE("GPL"); + +#if 0 +/* + * register_serial and unregister_serial allows for serial ports to be + * configured at run-time, to support PCMCIA modems. + */ +/* PowerMac: Unused at this time, just here to make things link. */ +int register_serial(struct serial_struct *req) +{ + return -1; +} + +void unregister_serial(int line) +{ + return; +} +#endif + +/* + * ------------------------------------------------------------ + * Serial console driver + * ------------------------------------------------------------ + */ +#ifdef CONFIG_SERIAL_CONSOLE + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + */ +static void serial_console_write(struct console *co, const char *s, + unsigned count) +{ + struct mac_serial *info = zs_soft + co->index; + int i; + + /* Turn of interrupts and enable the transmitter. */ + write_zsreg(info->zs_channel, R1, info->curregs[1] & ~TxINT_ENAB); + write_zsreg(info->zs_channel, R5, info->curregs[5] | TxENAB | RTS | DTR); + + for (i=0; i<count; i++) { + /* Wait for the transmit buffer to empty. */ + while ((read_zsreg(info->zs_channel, 0) & Tx_BUF_EMP) == 0) { + eieio(); + } + + write_zsdata(info->zs_channel, s[i]); + if (s[i] == 10) { + while ((read_zsreg(info->zs_channel, 0) & Tx_BUF_EMP) + == 0) + eieio(); + + write_zsdata(info->zs_channel, 13); + } + } + + /* Restore the values in the registers. */ + write_zsreg(info->zs_channel, R1, info->curregs[1]); + /* Don't disable the transmitter. */ +} + +static struct tty_driver *serial_driver; + +static struct tty_driver *serial_console_device(struct console *c, int *index) +{ + *index = c->index; + return serial_driver; +} + +/* + * Setup initial baud/bits/parity. We do two things here: + * - construct a cflag setting for the first rs_open() + * - initialize the serial port + * Return non-zero if we didn't find a serial port. + */ +static int __init serial_console_setup(struct console *co, char *options) +{ + struct mac_serial *info; + int baud = 38400; + int bits = 8; + int parity = 'n'; + int cflag = CREAD | HUPCL | CLOCAL; + int brg; + char *s; + long flags; + + /* Find out how many Z8530 SCCs we have */ + if (zs_chain == 0) + probe_sccs(); + + if (zs_chain == 0) + return -1; + + /* Do we have the device asked for? */ + if (co->index >= zs_channels_found) + return -1; + info = zs_soft + co->index; + + set_scc_power(info, 1); + + /* Reset the channel */ + write_zsreg(info->zs_channel, R9, CHRA); + + if (options) { + baud = simple_strtoul(options, NULL, 10); + s = options; + while(*s >= '0' && *s <= '9') + s++; + if (*s) + parity = *s++; + if (*s) + bits = *s - '0'; + } + + /* + * Now construct a cflag setting. + */ + switch(baud) { + case 1200: + cflag |= B1200; + break; + case 2400: + cflag |= B2400; + break; + case 4800: + cflag |= B4800; + break; + case 9600: + cflag |= B9600; + break; + case 19200: + cflag |= B19200; + break; + case 57600: + cflag |= B57600; + break; + case 115200: + cflag |= B115200; + break; + case 38400: + default: + cflag |= B38400; + break; + } + switch(bits) { + case 7: + cflag |= CS7; + break; + default: + case 8: + cflag |= CS8; + break; + } + switch(parity) { + case 'o': case 'O': + cflag |= PARENB | PARODD; + break; + case 'e': case 'E': + cflag |= PARENB; + break; + } + co->cflag = cflag; + + spin_lock_irqsave(&info->lock, flags); + memset(info->curregs, 0, sizeof(info->curregs)); + + info->zs_baud = baud; + info->clk_divisor = 16; + switch (info->zs_baud) { + case ZS_CLOCK/16: /* 230400 */ + info->curregs[4] = X16CLK; + info->curregs[11] = 0; + break; + case ZS_CLOCK/32: /* 115200 */ + info->curregs[4] = X32CLK; + info->curregs[11] = 0; + break; + default: + info->curregs[4] = X16CLK; + info->curregs[11] = TCBR | RCBR; + brg = BPS_TO_BRG(info->zs_baud, ZS_CLOCK/info->clk_divisor); + info->curregs[12] = (brg & 255); + info->curregs[13] = ((brg >> 8) & 255); + info->curregs[14] = BRENABL; + } + + /* byte size and parity */ + info->curregs[3] &= ~RxNBITS_MASK; + info->curregs[5] &= ~TxNBITS_MASK; + switch (cflag & CSIZE) { + case CS5: + info->curregs[3] |= Rx5; + info->curregs[5] |= Tx5; + break; + case CS6: + info->curregs[3] |= Rx6; + info->curregs[5] |= Tx6; + break; + case CS7: + info->curregs[3] |= Rx7; + info->curregs[5] |= Tx7; + break; + case CS8: + default: /* defaults to 8 bits */ + info->curregs[3] |= Rx8; + info->curregs[5] |= Tx8; + break; + } + info->curregs[5] |= TxENAB | RTS | DTR; + info->pendregs[3] = info->curregs[3]; + info->pendregs[5] = info->curregs[5]; + + info->curregs[4] &= ~(SB_MASK | PAR_ENA | PAR_EVEN); + if (cflag & CSTOPB) { + info->curregs[4] |= SB2; + } else { + info->curregs[4] |= SB1; + } + if (cflag & PARENB) { + info->curregs[4] |= PAR_ENA; + if (!(cflag & PARODD)) { + info->curregs[4] |= PAR_EVEN; + } + } + info->pendregs[4] = info->curregs[4]; + + if (!(cflag & CLOCAL)) { + if (!(info->curregs[15] & DCDIE)) + info->read_reg_zero = read_zsreg(info->zs_channel, 0); + info->curregs[15] |= DCDIE; + } else + info->curregs[15] &= ~DCDIE; + if (cflag & CRTSCTS) { + info->curregs[15] |= CTSIE; + if ((read_zsreg(info->zs_channel, 0) & CTS) != 0) + info->tx_stopped = 1; + } else { + info->curregs[15] &= ~CTSIE; + info->tx_stopped = 0; + } + info->pendregs[15] = info->curregs[15]; + + /* Load up the new values */ + load_zsregs(info->zs_channel, info->curregs); + + spin_unlock_irqrestore(&info->lock, flags); + + return 0; +} + +static struct console sercons = { + .name = "ttyS", + .write = serial_console_write, + .device = serial_console_device, + .setup = serial_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +/* + * Register console. + */ +static void __init mac_scc_console_init(void) +{ + register_console(&sercons); +} +console_initcall(mac_scc_console_init); + +#endif /* ifdef CONFIG_SERIAL_CONSOLE */ + +#ifdef CONFIG_KGDB +/* These are for receiving and sending characters under the kgdb + * source level kernel debugger. + */ +void putDebugChar(char kgdb_char) +{ + struct mac_zschannel *chan = zs_kgdbchan; + while ((read_zsreg(chan, 0) & Tx_BUF_EMP) == 0) + udelay(5); + write_zsdata(chan, kgdb_char); +} + +char getDebugChar(void) +{ + struct mac_zschannel *chan = zs_kgdbchan; + while((read_zsreg(chan, 0) & Rx_CH_AV) == 0) + eieio(); /*barrier();*/ + return read_zsdata(chan); +} + +void kgdb_interruptible(int yes) +{ + struct mac_zschannel *chan = zs_kgdbchan; + int one, nine; + nine = read_zsreg(chan, 9); + if (yes == 1) { + one = EXT_INT_ENAB|INT_ALL_Rx; + nine |= MIE; + printk("turning serial ints on\n"); + } else { + one = RxINT_DISAB; + nine &= ~MIE; + printk("turning serial ints off\n"); + } + write_zsreg(chan, 1, one); + write_zsreg(chan, 9, nine); +} + +/* This sets up the serial port we're using, and turns on + * interrupts for that channel, so kgdb is usable once we're done. + */ +static inline void kgdb_chaninit(struct mac_zschannel *ms, int intson, int bps) +{ + int brg; + int i, x; + volatile char *sccc = ms->control; + brg = BPS_TO_BRG(bps, ZS_CLOCK/16); + printk("setting bps on kgdb line to %d [brg=%x]\n", bps, brg); + for (i = 20000; i != 0; --i) { + x = *sccc; eieio(); + } + for (i = 0; i < sizeof(scc_inittab); ++i) { + write_zsreg(ms, scc_inittab[i], scc_inittab[i+1]); + i++; + } +} + +/* This is called at boot time to prime the kgdb serial debugging + * serial line. The 'tty_num' argument is 0 for /dev/ttya and 1 + * for /dev/ttyb which is determined in setup_arch() from the + * boot command line flags. + * XXX at the moment probably only channel A will work + */ +void __init zs_kgdb_hook(int tty_num) +{ + /* Find out how many Z8530 SCCs we have */ + if (zs_chain == 0) + probe_sccs(); + + set_scc_power(&zs_soft[tty_num], 1); + + zs_kgdbchan = zs_soft[tty_num].zs_channel; + zs_soft[tty_num].change_needed = 0; + zs_soft[tty_num].clk_divisor = 16; + zs_soft[tty_num].zs_baud = 38400; + zs_soft[tty_num].kgdb_channel = 1; /* This runs kgdb */ + + /* Turn on transmitter/receiver at 8-bits/char */ + kgdb_chaninit(zs_soft[tty_num].zs_channel, 1, 38400); + printk("KGDB: on channel %d initialized\n", tty_num); + set_debug_traps(); /* init stub */ +} +#endif /* ifdef CONFIG_KGDB */ + +#ifdef CONFIG_PMAC_PBOOK +/* + * notify clients before sleep and reset bus afterwards + */ +int +serial_notify_sleep(struct pmu_sleep_notifier *self, int when) +{ + int i; + + switch (when) { + case PBOOK_SLEEP_REQUEST: + case PBOOK_SLEEP_REJECT: + break; + + case PBOOK_SLEEP_NOW: + for (i=0; i<zs_channels_found; i++) { + struct mac_serial *info = &zs_soft[i]; + if (info->flags & ZILOG_INITIALIZED) { + shutdown(info); + info->flags |= ZILOG_SLEEPING; + } + } + break; + case PBOOK_WAKE: + for (i=0; i<zs_channels_found; i++) { + struct mac_serial *info = &zs_soft[i]; + if (info->flags & ZILOG_SLEEPING) { + info->flags &= ~ZILOG_SLEEPING; + startup(info); + } + } + break; + } + return PBOOK_SLEEP_OK; +} +#endif /* CONFIG_PMAC_PBOOK */ |