aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/common/saa7146_i2c.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/common/saa7146_i2c.c')
-rw-r--r--drivers/media/common/saa7146_i2c.c421
1 files changed, 421 insertions, 0 deletions
diff --git a/drivers/media/common/saa7146_i2c.c b/drivers/media/common/saa7146_i2c.c
new file mode 100644
index 00000000000..781f23f0cbc
--- /dev/null
+++ b/drivers/media/common/saa7146_i2c.c
@@ -0,0 +1,421 @@
+#include <linux/version.h>
+#include <media/saa7146_vv.h>
+
+static u32 saa7146_i2c_func(struct i2c_adapter *adapter)
+{
+//fm DEB_I2C(("'%s'.\n", adapter->name));
+
+ return I2C_FUNC_I2C
+ | I2C_FUNC_SMBUS_QUICK
+ | I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE
+ | I2C_FUNC_SMBUS_READ_BYTE_DATA | I2C_FUNC_SMBUS_WRITE_BYTE_DATA;
+}
+
+/* this function returns the status-register of our i2c-device */
+static inline u32 saa7146_i2c_status(struct saa7146_dev *dev)
+{
+ u32 iicsta = saa7146_read(dev, I2C_STATUS);
+/*
+ DEB_I2C(("status: 0x%08x\n",iicsta));
+*/
+ return iicsta;
+}
+
+/* this function runs through the i2c-messages and prepares the data to be
+ sent through the saa7146. have a look at the specifications p. 122 ff
+ to understand this. it returns the number of u32s to send, or -1
+ in case of an error. */
+static int saa7146_i2c_msg_prepare(const struct i2c_msg *m, int num, u32 *op)
+{
+ int h1, h2;
+ int i, j, addr;
+ int mem = 0, op_count = 0;
+
+ /* first determine size of needed memory */
+ for(i = 0; i < num; i++) {
+ mem += m[i].len + 1;
+ }
+
+ /* worst case: we need one u32 for three bytes to be send
+ plus one extra byte to address the device */
+ mem = 1 + ((mem-1) / 3);
+
+ /* we assume that op points to a memory of at least SAA7146_I2C_MEM bytes
+ size. if we exceed this limit... */
+ if ( (4*mem) > SAA7146_I2C_MEM ) {
+//fm DEB_I2C(("cannot prepare i2c-message.\n"));
+ return -ENOMEM;
+ }
+
+ /* be careful: clear out the i2c-mem first */
+ memset(op,0,sizeof(u32)*mem);
+
+ /* loop through all messages */
+ for(i = 0; i < num; i++) {
+
+ /* insert the address of the i2c-slave.
+ note: we get 7 bit i2c-addresses,
+ so we have to perform a translation */
+ addr = (m[i].addr*2) + ( (0 != (m[i].flags & I2C_M_RD)) ? 1 : 0);
+ h1 = op_count/3; h2 = op_count%3;
+ op[h1] |= ( (u8)addr << ((3-h2)*8));
+ op[h1] |= (SAA7146_I2C_START << ((3-h2)*2));
+ op_count++;
+
+ /* loop through all bytes of message i */
+ for(j = 0; j < m[i].len; j++) {
+ /* insert the data bytes */
+ h1 = op_count/3; h2 = op_count%3;
+ op[h1] |= ( (u32)((u8)m[i].buf[j]) << ((3-h2)*8));
+ op[h1] |= ( SAA7146_I2C_CONT << ((3-h2)*2));
+ op_count++;
+ }
+
+ }
+
+ /* have a look at the last byte inserted:
+ if it was: ...CONT change it to ...STOP */
+ h1 = (op_count-1)/3; h2 = (op_count-1)%3;
+ if ( SAA7146_I2C_CONT == (0x3 & (op[h1] >> ((3-h2)*2))) ) {
+ op[h1] &= ~(0x2 << ((3-h2)*2));
+ op[h1] |= (SAA7146_I2C_STOP << ((3-h2)*2));
+ }
+
+ /* return the number of u32s to send */
+ return mem;
+}
+
+/* this functions loops through all i2c-messages. normally, it should determine
+ which bytes were read through the adapter and write them back to the corresponding
+ i2c-message. but instead, we simply write back all bytes.
+ fixme: this could be improved. */
+static int saa7146_i2c_msg_cleanup(const struct i2c_msg *m, int num, u32 *op)
+{
+ int i, j;
+ int op_count = 0;
+
+ /* loop through all messages */
+ for(i = 0; i < num; i++) {
+
+ op_count++;
+
+ /* loop throgh all bytes of message i */
+ for(j = 0; j < m[i].len; j++) {
+ /* write back all bytes that could have been read */
+ m[i].buf[j] = (op[op_count/3] >> ((3-(op_count%3))*8));
+ op_count++;
+ }
+ }
+
+ return 0;
+}
+
+/* this functions resets the i2c-device and returns 0 if everything was fine, otherwise -1 */
+static int saa7146_i2c_reset(struct saa7146_dev *dev)
+{
+ /* get current status */
+ u32 status = saa7146_i2c_status(dev);
+
+ /* clear registers for sure */
+ saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate);
+ saa7146_write(dev, I2C_TRANSFER, 0);
+
+ /* check if any operation is still in progress */
+ if ( 0 != ( status & SAA7146_I2C_BUSY) ) {
+
+ /* yes, kill ongoing operation */
+ DEB_I2C(("busy_state detected.\n"));
+
+ /* set "ABORT-OPERATION"-bit (bit 7)*/
+ saa7146_write(dev, I2C_STATUS, (dev->i2c_bitrate | MASK_07));
+ saa7146_write(dev, MC2, (MASK_00 | MASK_16));
+ msleep(SAA7146_I2C_DELAY);
+
+ /* clear all error-bits pending; this is needed because p.123, note 1 */
+ saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate);
+ saa7146_write(dev, MC2, (MASK_00 | MASK_16));
+ msleep(SAA7146_I2C_DELAY);
+ }
+
+ /* check if any error is (still) present. (this can be necessary because p.123, note 1) */
+ status = saa7146_i2c_status(dev);
+
+ if ( dev->i2c_bitrate != status ) {
+
+ DEB_I2C(("error_state detected. status:0x%08x\n",status));
+
+ /* Repeat the abort operation. This seems to be necessary
+ after serious protocol errors caused by e.g. the SAA7740 */
+ saa7146_write(dev, I2C_STATUS, (dev->i2c_bitrate | MASK_07));
+ saa7146_write(dev, MC2, (MASK_00 | MASK_16));
+ msleep(SAA7146_I2C_DELAY);
+
+ /* clear all error-bits pending */
+ saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate);
+ saa7146_write(dev, MC2, (MASK_00 | MASK_16));
+ msleep(SAA7146_I2C_DELAY);
+
+ /* the data sheet says it might be necessary to clear the status
+ twice after an abort */
+ saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate);
+ saa7146_write(dev, MC2, (MASK_00 | MASK_16));
+ msleep(SAA7146_I2C_DELAY);
+ }
+
+ /* if any error is still present, a fatal error has occured ... */
+ status = saa7146_i2c_status(dev);
+ if ( dev->i2c_bitrate != status ) {
+ DEB_I2C(("fatal error. status:0x%08x\n",status));
+ return -1;
+ }
+
+ return 0;
+}
+
+/* this functions writes out the data-byte 'dword' to the i2c-device.
+ it returns 0 if ok, -1 if the transfer failed, -2 if the transfer
+ failed badly (e.g. address error) */
+static int saa7146_i2c_writeout(struct saa7146_dev *dev, u32* dword, int short_delay)
+{
+ u32 status = 0, mc2 = 0;
+ int trial = 0;
+ unsigned long timeout;
+
+ /* write out i2c-command */
+ DEB_I2C(("before: 0x%08x (status: 0x%08x), %d\n",*dword,saa7146_read(dev, I2C_STATUS), dev->i2c_op));
+
+ if( 0 != (SAA7146_USE_I2C_IRQ & dev->ext->flags)) {
+
+ saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate);
+ saa7146_write(dev, I2C_TRANSFER, *dword);
+
+ dev->i2c_op = 1;
+ SAA7146_IER_ENABLE(dev, MASK_16|MASK_17);
+ saa7146_write(dev, MC2, (MASK_00 | MASK_16));
+
+ wait_event_interruptible(dev->i2c_wq, dev->i2c_op == 0);
+ if (signal_pending (current)) {
+ /* a signal arrived */
+ return -ERESTARTSYS;
+ }
+ status = saa7146_read(dev, I2C_STATUS);
+ } else {
+ saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate);
+ saa7146_write(dev, I2C_TRANSFER, *dword);
+ saa7146_write(dev, MC2, (MASK_00 | MASK_16));
+
+ /* do not poll for i2c-status before upload is complete */
+ timeout = jiffies + HZ/100 + 1; /* 10ms */
+ while(1) {
+ mc2 = (saa7146_read(dev, MC2) & 0x1);
+ if( 0 != mc2 ) {
+ break;
+ }
+ if (time_after(jiffies,timeout)) {
+ printk(KERN_WARNING "saa7146_i2c_writeout: timed out waiting for MC2\n");
+ return -EIO;
+ }
+ }
+ /* wait until we get a transfer done or error */
+ timeout = jiffies + HZ/100 + 1; /* 10ms */
+ while(1) {
+ /**
+ * first read usually delivers bogus results...
+ */
+ saa7146_i2c_status(dev);
+ status = saa7146_i2c_status(dev);
+ if ((status & 0x3) != 1)
+ break;
+ if (time_after(jiffies,timeout)) {
+ /* this is normal when probing the bus
+ * (no answer from nonexisistant device...)
+ */
+ DEB_I2C(("saa7146_i2c_writeout: timed out waiting for end of xfer\n"));
+ return -EIO;
+ }
+ if ((++trial < 20) && short_delay)
+ udelay(10);
+ else
+ msleep(1);
+ }
+ }
+
+ /* give a detailed status report */
+ if ( 0 != (status & SAA7146_I2C_ERR)) {
+
+ if( 0 != (status & SAA7146_I2C_SPERR) ) {
+ DEB_I2C(("error due to invalid start/stop condition.\n"));
+ }
+ if( 0 != (status & SAA7146_I2C_DTERR) ) {
+ DEB_I2C(("error in data transmission.\n"));
+ }
+ if( 0 != (status & SAA7146_I2C_DRERR) ) {
+ DEB_I2C(("error when receiving data.\n"));
+ }
+ if( 0 != (status & SAA7146_I2C_AL) ) {
+ DEB_I2C(("error because arbitration lost.\n"));
+ }
+
+ /* we handle address-errors here */
+ if( 0 != (status & SAA7146_I2C_APERR) ) {
+ DEB_I2C(("error in address phase.\n"));
+ return -EREMOTEIO;
+ }
+
+ return -EIO;
+ }
+
+ /* read back data, just in case we were reading ... */
+ *dword = saa7146_read(dev, I2C_TRANSFER);
+
+ DEB_I2C(("after: 0x%08x\n",*dword));
+ return 0;
+}
+
+int saa7146_i2c_transfer(struct saa7146_dev *dev, const struct i2c_msg *msgs, int num, int retries)
+{
+ int i = 0, count = 0;
+ u32* buffer = dev->d_i2c.cpu_addr;
+ int err = 0;
+ int address_err = 0;
+ int short_delay = 0;
+
+ if (down_interruptible (&dev->i2c_lock))
+ return -ERESTARTSYS;
+
+ for(i=0;i<num;i++) {
+ DEB_I2C(("msg:%d/%d\n",i+1,num));
+ }
+
+ /* prepare the message(s), get number of u32s to transfer */
+ count = saa7146_i2c_msg_prepare(msgs, num, buffer);
+ if ( 0 > count ) {
+ err = -1;
+ goto out;
+ }
+
+ if ( count > 3 || 0 != (SAA7146_I2C_SHORT_DELAY & dev->ext->flags) )
+ short_delay = 1;
+
+ do {
+ /* reset the i2c-device if necessary */
+ err = saa7146_i2c_reset(dev);
+ if ( 0 > err ) {
+ DEB_I2C(("could not reset i2c-device.\n"));
+ goto out;
+ }
+
+ /* write out the u32s one after another */
+ for(i = 0; i < count; i++) {
+ err = saa7146_i2c_writeout(dev, &buffer[i], short_delay);
+ if ( 0 != err) {
+ /* this one is unsatisfying: some i2c slaves on some
+ dvb cards don't acknowledge correctly, so the saa7146
+ thinks that an address error occured. in that case, the
+ transaction should be retrying, even if an address error
+ occured. analog saa7146 based cards extensively rely on
+ i2c address probing, however, and address errors indicate that a
+ device is really *not* there. retrying in that case
+ increases the time the device needs to probe greatly, so
+ it should be avoided. because of the fact, that only
+ analog based cards use irq based i2c transactions (for dvb
+ cards, this screwes up other interrupt sources), we bail out
+ completely for analog cards after an address error and trust
+ the saa7146 address error detection. */
+ if ( -EREMOTEIO == err ) {
+ if( 0 != (SAA7146_USE_I2C_IRQ & dev->ext->flags)) {
+ goto out;
+ }
+ address_err++;
+ }
+ DEB_I2C(("error while sending message(s). starting again.\n"));
+ break;
+ }
+ }
+ if( 0 == err ) {
+ err = num;
+ break;
+ }
+
+ /* delay a bit before retrying */
+ msleep(10);
+
+ } while (err != num && retries--);
+
+ /* if every retry had an address error, exit right away */
+ if (address_err == retries) {
+ goto out;
+ }
+
+ /* if any things had to be read, get the results */
+ if ( 0 != saa7146_i2c_msg_cleanup(msgs, num, buffer)) {
+ DEB_I2C(("could not cleanup i2c-message.\n"));
+ err = -1;
+ goto out;
+ }
+
+ /* return the number of delivered messages */
+ DEB_I2C(("transmission successful. (msg:%d).\n",err));
+out:
+ /* another bug in revision 0: the i2c-registers get uploaded randomly by other
+ uploads, so we better clear them out before continueing */
+ if( 0 == dev->revision ) {
+ u32 zero = 0;
+ saa7146_i2c_reset(dev);
+ if( 0 != saa7146_i2c_writeout(dev, &zero, short_delay)) {
+ INFO(("revision 0 error. this should never happen.\n"));
+ }
+ }
+
+ up(&dev->i2c_lock);
+ return err;
+}
+
+/* utility functions */
+static int saa7146_i2c_xfer(struct i2c_adapter* adapter, struct i2c_msg *msg, int num)
+{
+ struct saa7146_dev* dev = i2c_get_adapdata(adapter);
+
+ /* use helper function to transfer data */
+ return saa7146_i2c_transfer(dev, msg, num, adapter->retries);
+}
+
+
+/*****************************************************************************/
+/* i2c-adapter helper functions */
+#include <linux/i2c-id.h>
+
+/* exported algorithm data */
+static struct i2c_algorithm saa7146_algo = {
+ .name = "saa7146 i2c algorithm",
+ .id = I2C_ALGO_SAA7146,
+ .master_xfer = saa7146_i2c_xfer,
+ .functionality = saa7146_i2c_func,
+};
+
+int saa7146_i2c_adapter_prepare(struct saa7146_dev *dev, struct i2c_adapter *i2c_adapter, u32 bitrate)
+{
+ DEB_EE(("bitrate: 0x%08x\n",bitrate));
+
+ /* enable i2c-port pins */
+ saa7146_write(dev, MC1, (MASK_08 | MASK_24));
+
+ dev->i2c_bitrate = bitrate;
+ saa7146_i2c_reset(dev);
+
+ if( NULL != i2c_adapter ) {
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
+ i2c_adapter->data = dev;
+#else
+ BUG_ON(!i2c_adapter->class);
+ i2c_set_adapdata(i2c_adapter,dev);
+#endif
+ i2c_adapter->algo = &saa7146_algo;
+ i2c_adapter->algo_data = NULL;
+ i2c_adapter->id = I2C_ALGO_SAA7146;
+ i2c_adapter->timeout = SAA7146_I2C_TIMEOUT;
+ i2c_adapter->retries = SAA7146_I2C_RETRIES;
+ }
+
+ return 0;
+}