aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/dvb/ttpci
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/dvb/ttpci')
-rw-r--r--drivers/media/dvb/ttpci/av7110.c29
-rw-r--r--drivers/media/dvb/ttpci/av7110_hw.c20
-rw-r--r--drivers/media/dvb/ttpci/av7110_hw.h3
-rw-r--r--drivers/media/dvb/ttpci/av7110_v4l.c4
-rw-r--r--drivers/media/dvb/ttpci/budget-core.c2
-rw-r--r--drivers/media/dvb/ttpci/budget-patch.c326
-rw-r--r--drivers/media/dvb/ttpci/budget.c6
-rw-r--r--drivers/media/dvb/ttpci/budget.h2
-rw-r--r--drivers/media/dvb/ttpci/fdump.c2
-rw-r--r--drivers/media/dvb/ttpci/ttpci-eeprom.c40
10 files changed, 219 insertions, 215 deletions
diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index 87ea52757a2..7dae91e5863 100644
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -176,6 +176,9 @@ static void init_av7110_av(struct av7110 *av7110)
}
}
+ if (dev->pci->subsystem_vendor == 0x13c2 && dev->pci->subsystem_device == 0x000e)
+ av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, SpdifSwitch, 1, 0); // SPDIF on
+
ret = av7110_set_volume(av7110, av7110->mixer.volume_left, av7110->mixer.volume_right);
if (ret < 0)
printk("dvb-ttpci:cannot set volume :%d\n",ret);
@@ -217,10 +220,10 @@ static int arm_thread(void *data)
dprintk(4, "%p\n",av7110);
- lock_kernel();
- daemonize("arm_mon");
- sigfillset(&current->blocked);
- unlock_kernel();
+ lock_kernel();
+ daemonize("arm_mon");
+ sigfillset(&current->blocked);
+ unlock_kernel();
av7110->arm_thread = current;
@@ -1535,7 +1538,7 @@ static int alps_bsrv2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_param
buf[2] = ((div & 0x18000) >> 10) | 0x95;
buf[3] = (pwr << 6) | 0x30;
- // NOTE: since we're using a prescaler of 2, we set the
+ // NOTE: since we're using a prescaler of 2, we set the
// divisor frequency to 62.5kHz and divide by 125 above
if (i2c_transfer (&av7110->i2c_adap, &msg, 1) != 1)
@@ -1811,7 +1814,7 @@ static struct tda8083_config grundig_29504_451_config = {
static int philips_cd1516_pll_set(struct dvb_frontend* fe,
struct dvb_frontend_parameters* params)
{
- struct av7110* av7110 = fe->dvb->priv;
+ struct av7110* av7110 = fe->dvb->priv;
u32 div;
u32 f = params->frequency;
u8 data[4];
@@ -2202,7 +2205,7 @@ static u8 read_pwm(struct av7110* av7110)
struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 },
{ .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} };
- if ((i2c_transfer(&av7110->i2c_adap, msg, 2) != 2) || (pwm == 0xff))
+ if ((i2c_transfer(&av7110->i2c_adap, msg, 2) != 2) || (pwm == 0xff))
pwm = 0x48;
return pwm;
@@ -2245,7 +2248,7 @@ static int frontend_init(struct av7110 *av7110)
}
// Try the grundig 29504-451
- av7110->fe = tda8083_attach(&grundig_29504_451_config, &av7110->i2c_adap);
+ av7110->fe = tda8083_attach(&grundig_29504_451_config, &av7110->i2c_adap);
if (av7110->fe) {
av7110->fe->ops->diseqc_send_master_cmd = av7110_diseqc_send_master_cmd;
av7110->fe->ops->diseqc_send_burst = av7110_diseqc_send_burst;
@@ -2271,12 +2274,12 @@ static int frontend_init(struct av7110 *av7110)
case 0x0001: // Hauppauge/TT Nexus-T premium rev1.X
// ALPS TDLB7
- av7110->fe = sp8870_attach(&alps_tdlb7_config, &av7110->i2c_adap);
+ av7110->fe = sp8870_attach(&alps_tdlb7_config, &av7110->i2c_adap);
break;
case 0x0002: // Hauppauge/TT DVB-C premium rev2.X
- av7110->fe = ves1820_attach(&alps_tdbe2_config, &av7110->i2c_adap, read_pwm(av7110));
+ av7110->fe = ves1820_attach(&alps_tdbe2_config, &av7110->i2c_adap, read_pwm(av7110));
break;
case 0x0006: /* Fujitsu-Siemens DVB-S rev 1.6 */
@@ -2421,9 +2424,9 @@ static int av7110_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_d
dprintk(4, "dev: %p\n", dev);
- /* Set RPS_IRQ to 1 to track rps1 activity.
- * Enabling this won't send any interrupt to PC CPU.
- */
+ /* Set RPS_IRQ to 1 to track rps1 activity.
+ * Enabling this won't send any interrupt to PC CPU.
+ */
#define RPS_IRQ 0
if (budgetpatch == 1) {
diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c
index 7442f56a72e..87106e8bf35 100644
--- a/drivers/media/dvb/ttpci/av7110_hw.c
+++ b/drivers/media/dvb/ttpci/av7110_hw.c
@@ -1203,15 +1203,15 @@ int av7110_osd_cmd(struct av7110 *av7110, osd_cmd_t *dc)
int av7110_osd_capability(struct av7110 *av7110, osd_cap_t *cap)
{
- switch (cap->cmd) {
- case OSD_CAP_MEMSIZE:
- if (FW_4M_SDRAM(av7110->arm_app))
- cap->val = 1000000;
- else
- cap->val = 92000;
- return 0;
- default:
- return -EINVAL;
- }
+ switch (cap->cmd) {
+ case OSD_CAP_MEMSIZE:
+ if (FW_4M_SDRAM(av7110->arm_app))
+ cap->val = 1000000;
+ else
+ cap->val = 92000;
+ return 0;
+ default:
+ return -EINVAL;
+ }
}
#endif /* CONFIG_DVB_AV7110_OSD */
diff --git a/drivers/media/dvb/ttpci/av7110_hw.h b/drivers/media/dvb/ttpci/av7110_hw.h
index fedd20f9815..2a5e87ba105 100644
--- a/drivers/media/dvb/ttpci/av7110_hw.h
+++ b/drivers/media/dvb/ttpci/av7110_hw.h
@@ -143,7 +143,8 @@ enum av7110_audio_command {
MainSwitch,
ADSwitch,
SendDiSEqC,
- SetRegister
+ SetRegister,
+ SpdifSwitch
};
enum av7110_request_command {
diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c b/drivers/media/dvb/ttpci/av7110_v4l.c
index 6af74f78b3e..b5aea4129fa 100644
--- a/drivers/media/dvb/ttpci/av7110_v4l.c
+++ b/drivers/media/dvb/ttpci/av7110_v4l.c
@@ -120,8 +120,8 @@ static int ves1820_writereg(struct saa7146_dev *dev, u8 addr, u8 reg, u8 data)
static int stv0297_writereg(struct saa7146_dev *dev, u8 addr, u8 reg, u8 data)
{
- u8 buf [] = { reg, data };
- struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = buf, .len = 2 };
+ u8 buf [] = { reg, data };
+ struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = buf, .len = 2 };
if (1 != saa7146_i2c_transfer(dev, &msg, 1, 1))
return -1;
diff --git a/drivers/media/dvb/ttpci/budget-core.c b/drivers/media/dvb/ttpci/budget-core.c
index 0498a055a4c..017fcbccb8c 100644
--- a/drivers/media/dvb/ttpci/budget-core.c
+++ b/drivers/media/dvb/ttpci/budget-core.c
@@ -87,7 +87,7 @@ static int start_ts_capture(struct budget *budget)
* Pitch: 188, NumBytes3: 188, NumLines3: 1024
*/
- switch(budget->card->type) {
+ switch(budget->card->type) {
case BUDGET_FS_ACTIVY:
saa7146_write(dev, DD1_INIT, 0x04000000);
saa7146_write(dev, MC2, (MASK_09 | MASK_25));
diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c
index 755df81cbc4..fc416cf5253 100644
--- a/drivers/media/dvb/ttpci/budget-patch.c
+++ b/drivers/media/dvb/ttpci/budget-patch.c
@@ -45,11 +45,11 @@ MAKE_BUDGET_INFO(ttbp, "TT-Budget/Patch DVB-S 1.x PCI", BUDGET_PATCH);
//MAKE_BUDGET_INFO(satel,"TT-Budget/Patch SATELCO PCI", BUDGET_TT_HW_DISEQC);
static struct pci_device_id pci_tbl[] = {
- MAKE_EXTENSION_PCI(ttbp,0x13c2, 0x0000),
+ MAKE_EXTENSION_PCI(ttbp,0x13c2, 0x0000),
// MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013),
- {
- .vendor = 0,
- }
+ {
+ .vendor = 0,
+ }
};
/* those lines are for budget-patch to be tried
@@ -165,57 +165,57 @@ static int budget_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t m
static int budget_av7110_send_fw_cmd(struct budget_patch *budget, u16* buf, int length)
{
- int i;
-
- dprintk(2, "budget: %p\n", budget);
-
- for (i = 2; i < length; i++)
- {
- ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2*i, 2, (u32) buf[i], 0,0);
- msleep(5);
- }
- if (length)
- ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, (u32) buf[1], 0,0);
- else
- ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, 0, 0,0);
- msleep(5);
- ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND, 2, (u32) buf[0], 0,0);
- msleep(5);
- return 0;
+ int i;
+
+ dprintk(2, "budget: %p\n", budget);
+
+ for (i = 2; i < length; i++)
+ {
+ ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2*i, 2, (u32) buf[i], 0,0);
+ msleep(5);
+ }
+ if (length)
+ ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, (u32) buf[1], 0,0);
+ else
+ ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, 0, 0,0);
+ msleep(5);
+ ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND, 2, (u32) buf[0], 0,0);
+ msleep(5);
+ return 0;
}
static void av7110_set22k(struct budget_patch *budget, int state)
{
- u16 buf[2] = {( COMTYPE_AUDIODAC << 8) | (state ? ON22K : OFF22K), 0};
+ u16 buf[2] = {( COMTYPE_AUDIODAC << 8) | (state ? ON22K : OFF22K), 0};
- dprintk(2, "budget: %p\n", budget);
- budget_av7110_send_fw_cmd(budget, buf, 2);
+ dprintk(2, "budget: %p\n", budget);
+ budget_av7110_send_fw_cmd(budget, buf, 2);
}
static int av7110_send_diseqc_msg(struct budget_patch *budget, int len, u8 *msg, int burst)
{
- int i;
- u16 buf[18] = { ((COMTYPE_AUDIODAC << 8) | SendDiSEqC),
- 16, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
+ int i;
+ u16 buf[18] = { ((COMTYPE_AUDIODAC << 8) | SendDiSEqC),
+ 16, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
- dprintk(2, "budget: %p\n", budget);
+ dprintk(2, "budget: %p\n", budget);
- if (len>10)
- len=10;
+ if (len>10)
+ len=10;
- buf[1] = len+2;
- buf[2] = len;
+ buf[1] = len+2;
+ buf[2] = len;
- if (burst != -1)
- buf[3]=burst ? 0x01 : 0x00;
- else
- buf[3]=0xffff;
+ if (burst != -1)
+ buf[3]=burst ? 0x01 : 0x00;
+ else
+ buf[3]=0xffff;
- for (i=0; i<len; i++)
- buf[i+4]=msg[i];
+ for (i=0; i<len; i++)
+ buf[i+4]=msg[i];
- budget_av7110_send_fw_cmd(budget, buf, 18);
- return 0;
+ budget_av7110_send_fw_cmd(budget, buf, 18);
+ return 0;
}
static int budget_patch_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
@@ -276,7 +276,7 @@ static int alps_bsrv2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_param
buf[2] = ((div & 0x18000) >> 10) | 0x95;
buf[3] = (pwr << 6) | 0x30;
- // NOTE: since we're using a prescaler of 2, we set the
+ // NOTE: since we're using a prescaler of 2, we set the
// divisor frequency to 62.5kHz and divide by 125 above
if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
@@ -294,7 +294,7 @@ static u8 alps_bsru6_inittab[] = {
0x01, 0x15,
0x02, 0x00,
0x03, 0x00,
- 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
+ 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
0x06, 0x40, /* DAC not used, set to high impendance mode */
0x07, 0x00, /* DAC LSB */
@@ -413,7 +413,7 @@ static void frontend_init(struct budget_patch* budget)
{
switch(budget->dev->pci->subsystem_device) {
case 0x0000: // Hauppauge/TT WinTV DVB-S rev1.X
- case 0x1013: // SATELCO Multimedia PCI
+ case 0x1013: // SATELCO Multimedia PCI
// try the ALPS BSRV2 first of all
budget->dvb_frontend = ves1x93_attach(&alps_bsrv2_config, &budget->i2c_adap);
@@ -463,8 +463,8 @@ static void frontend_init(struct budget_patch* budget)
/* written by Emard */
static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_data *info)
{
- struct budget_patch *budget;
- int err;
+ struct budget_patch *budget;
+ int err;
int count = 0;
int detected = 0;
@@ -472,12 +472,12 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
#define RPS_IRQ 0
#define HPS_SETUP 0
#if PATCH_RESET
- saa7146_write(dev, MC1, MASK_31);
- msleep(40);
+ saa7146_write(dev, MC1, MASK_31);
+ msleep(40);
#endif
#if HPS_SETUP
- // initialize registers. Better to have it like this
- // than leaving something unconfigured
+ // initialize registers. Better to have it like this
+ // than leaving something unconfigured
saa7146_write(dev, DD1_STREAM_B, 0);
// port B VSYNC at rising edge
saa7146_write(dev, DD1_INIT, 0x00000200); // have this in budget-core too!
@@ -486,29 +486,29 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
// debi config
// saa7146_write(dev, DEBI_CONFIG, MASK_30|MASK_28|MASK_18);
- // zero all HPS registers
- saa7146_write(dev, HPS_H_PRESCALE, 0); // r68
- saa7146_write(dev, HPS_H_SCALE, 0); // r6c
- saa7146_write(dev, BCS_CTRL, 0); // r70
- saa7146_write(dev, HPS_V_SCALE, 0); // r60
- saa7146_write(dev, HPS_V_GAIN, 0); // r64
- saa7146_write(dev, CHROMA_KEY_RANGE, 0); // r74
- saa7146_write(dev, CLIP_FORMAT_CTRL, 0); // r78
- // Set HPS prescaler for port B input
- saa7146_write(dev, HPS_CTRL, (1<<30) | (0<<29) | (1<<28) | (0<<12) );
- saa7146_write(dev, MC2,
- 0 * (MASK_08 | MASK_24) | // BRS control
- 0 * (MASK_09 | MASK_25) | // a
- 0 * (MASK_10 | MASK_26) | // b
- 1 * (MASK_06 | MASK_22) | // HPS_CTRL1
- 1 * (MASK_05 | MASK_21) | // HPS_CTRL2
- 0 * (MASK_01 | MASK_15) // DEBI
- );
+ // zero all HPS registers
+ saa7146_write(dev, HPS_H_PRESCALE, 0); // r68
+ saa7146_write(dev, HPS_H_SCALE, 0); // r6c
+ saa7146_write(dev, BCS_CTRL, 0); // r70
+ saa7146_write(dev, HPS_V_SCALE, 0); // r60
+ saa7146_write(dev, HPS_V_GAIN, 0); // r64
+ saa7146_write(dev, CHROMA_KEY_RANGE, 0); // r74
+ saa7146_write(dev, CLIP_FORMAT_CTRL, 0); // r78
+ // Set HPS prescaler for port B input
+ saa7146_write(dev, HPS_CTRL, (1<<30) | (0<<29) | (1<<28) | (0<<12) );
+ saa7146_write(dev, MC2,
+ 0 * (MASK_08 | MASK_24) | // BRS control
+ 0 * (MASK_09 | MASK_25) | // a
+ 0 * (MASK_10 | MASK_26) | // b
+ 1 * (MASK_06 | MASK_22) | // HPS_CTRL1
+ 1 * (MASK_05 | MASK_21) | // HPS_CTRL2
+ 0 * (MASK_01 | MASK_15) // DEBI
+ );
#endif
// Disable RPS1 and RPS0
- saa7146_write(dev, MC1, ( MASK_29 | MASK_28));
- // RPS1 timeout disable
- saa7146_write(dev, RPS_TOV1, 0);
+ saa7146_write(dev, MC1, ( MASK_29 | MASK_28));
+ // RPS1 timeout disable
+ saa7146_write(dev, RPS_TOV1, 0);
// code for autodetection
// will wait for VBI_B event (vertical blank at port B)
@@ -521,38 +521,38 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
WRITE_RPS1(cpu_to_le32(CMD_UPLOAD |
MASK_10 | MASK_09 | MASK_08 | MASK_06 | MASK_05 | MASK_04 | MASK_03 | MASK_02 ));
#endif
- WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_VBI_B));
- WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
- WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
- WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
+ WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_VBI_B));
+ WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
+ WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
+ WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
#if RPS_IRQ
- // issue RPS1 interrupt to increment counter
- WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
- // at least a NOP is neede between two interrupts
- WRITE_RPS1(cpu_to_le32(CMD_NOP));
- // interrupt again
- WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+ // issue RPS1 interrupt to increment counter
+ WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+ // at least a NOP is neede between two interrupts
+ WRITE_RPS1(cpu_to_le32(CMD_NOP));
+ // interrupt again
+ WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
#endif
- WRITE_RPS1(cpu_to_le32(CMD_STOP));
+ WRITE_RPS1(cpu_to_le32(CMD_STOP));
#if RPS_IRQ
- // set event counter 1 source as RPS1 interrupt (0x03) (rE4 p53)
- // use 0x03 to track RPS1 interrupts - increase by 1 every gpio3 is toggled
- // use 0x15 to track VPE interrupts - increase by 1 every vpeirq() is called
- saa7146_write(dev, EC1SSR, (0x03<<2) | 3 );
- // set event counter 1 treshold to maximum allowed value (rEC p55)
- saa7146_write(dev, ECT1R, 0x3fff );
+ // set event counter 1 source as RPS1 interrupt (0x03) (rE4 p53)
+ // use 0x03 to track RPS1 interrupts - increase by 1 every gpio3 is toggled
+ // use 0x15 to track VPE interrupts - increase by 1 every vpeirq() is called
+ saa7146_write(dev, EC1SSR, (0x03<<2) | 3 );
+ // set event counter 1 treshold to maximum allowed value (rEC p55)
+ saa7146_write(dev, ECT1R, 0x3fff );
#endif
- // Fix VSYNC level
- saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
- // Set RPS1 Address register to point to RPS code (r108 p42)
- saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
- // Enable RPS1, (rFC p33)
- saa7146_write(dev, MC1, (MASK_13 | MASK_29 ));
+ // Fix VSYNC level
+ saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
+ // Set RPS1 Address register to point to RPS code (r108 p42)
+ saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
+ // Enable RPS1, (rFC p33)
+ saa7146_write(dev, MC1, (MASK_13 | MASK_29 ));
- mdelay(50);
- saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
+ mdelay(50);
+ saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
mdelay(150);
@@ -560,17 +560,17 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
detected = 1;
#if RPS_IRQ
- printk("Event Counter 1 0x%04x\n", saa7146_read(dev, EC1R) & 0x3fff );
+ printk("Event Counter 1 0x%04x\n", saa7146_read(dev, EC1R) & 0x3fff );
#endif
// Disable RPS1
- saa7146_write(dev, MC1, ( MASK_29 ));
+ saa7146_write(dev, MC1, ( MASK_29 ));
if(detected == 0)
- printk("budget-patch not detected or saa7146 in non-default state.\n"
- "try enabling ressetting of 7146 with MASK_31 in MC1 register\n");
+ printk("budget-patch not detected or saa7146 in non-default state.\n"
+ "try enabling ressetting of 7146 with MASK_31 in MC1 register\n");
else
- printk("BUDGET-PATCH DETECTED.\n");
+ printk("BUDGET-PATCH DETECTED.\n");
/* OLD (Original design by Roberto Deza):
@@ -641,83 +641,83 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
*/
// Setup RPS1 "program" (p35)
- count = 0;
+ count = 0;
- // Wait Source Line Counter Threshold (p36)
- WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_HS));
- // Set GPIO3=1 (p42)
- WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
- WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
- WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTHI<<24));
+ // Wait Source Line Counter Threshold (p36)
+ WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_HS));
+ // Set GPIO3=1 (p42)
+ WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
+ WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
+ WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTHI<<24));
#if RPS_IRQ
- // issue RPS1 interrupt
- WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+ // issue RPS1 interrupt
+ WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
#endif
- // Wait reset Source Line Counter Threshold (p36)
- WRITE_RPS1(cpu_to_le32(CMD_PAUSE | RPS_INV | EVT_HS));
- // Set GPIO3=0 (p42)
- WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
- WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
- WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
+ // Wait reset Source Line Counter Threshold (p36)
+ WRITE_RPS1(cpu_to_le32(CMD_PAUSE | RPS_INV | EVT_HS));
+ // Set GPIO3=0 (p42)
+ WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
+ WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
+ WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
#if RPS_IRQ
- // issue RPS1 interrupt
- WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+ // issue RPS1 interrupt
+ WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
#endif
- // Jump to begin of RPS program (p37)
- WRITE_RPS1(cpu_to_le32(CMD_JUMP));
- WRITE_RPS1(cpu_to_le32(dev->d_rps1.dma_handle));
-
- // Fix VSYNC level
- saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
- // Set RPS1 Address register to point to RPS code (r108 p42)
- saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
- // Set Source Line Counter Threshold, using BRS (rCC p43)
- // It generates HS event every TS_HEIGHT lines
- // this is related to TS_WIDTH set in register
- // NUM_LINE_BYTE3 in budget-core.c. If NUM_LINE_BYTE
- // low 16 bits are set to TS_WIDTH bytes (TS_WIDTH=2*188
- //,then RPS_THRESH1
- // should be set to trigger every TS_HEIGHT (512) lines.
- //
- saa7146_write(dev, RPS_THRESH1, (TS_HEIGHT*1) | MASK_12 );
+ // Jump to begin of RPS program (p37)
+ WRITE_RPS1(cpu_to_le32(CMD_JUMP));
+ WRITE_RPS1(cpu_to_le32(dev->d_rps1.dma_handle));
- // saa7146_write(dev, RPS_THRESH0, ((TS_HEIGHT/2)<<16) |MASK_28| (TS_HEIGHT/2) |MASK_12 );
- // Enable RPS1 (rFC p33)
- saa7146_write(dev, MC1, (MASK_13 | MASK_29));
-
-
- if (!(budget = kmalloc (sizeof(struct budget_patch), GFP_KERNEL)))
- return -ENOMEM;
+ // Fix VSYNC level
+ saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
+ // Set RPS1 Address register to point to RPS code (r108 p42)
+ saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
+ // Set Source Line Counter Threshold, using BRS (rCC p43)
+ // It generates HS event every TS_HEIGHT lines
+ // this is related to TS_WIDTH set in register
+ // NUM_LINE_BYTE3 in budget-core.c. If NUM_LINE_BYTE
+ // low 16 bits are set to TS_WIDTH bytes (TS_WIDTH=2*188
+ //,then RPS_THRESH1
+ // should be set to trigger every TS_HEIGHT (512) lines.
+ //
+ saa7146_write(dev, RPS_THRESH1, (TS_HEIGHT*1) | MASK_12 );
+
+ // saa7146_write(dev, RPS_THRESH0, ((TS_HEIGHT/2)<<16) |MASK_28| (TS_HEIGHT/2) |MASK_12 );
+ // Enable RPS1 (rFC p33)
+ saa7146_write(dev, MC1, (MASK_13 | MASK_29));
+
+
+ if (!(budget = kmalloc (sizeof(struct budget_patch), GFP_KERNEL)))
+ return -ENOMEM;
- dprintk(2, "budget: %p\n", budget);
+ dprintk(2, "budget: %p\n", budget);
- if ((err = ttpci_budget_init (budget, dev, info, THIS_MODULE))) {
- kfree (budget);
- return err;
- }
+ if ((err = ttpci_budget_init (budget, dev, info, THIS_MODULE))) {
+ kfree (budget);
+ return err;
+ }
- dev->ext_priv = budget;
+ dev->ext_priv = budget;
budget->dvb_adapter.priv = budget;
frontend_init(budget);
- return 0;
+ return 0;
}
static int budget_patch_detach (struct saa7146_dev* dev)
{
- struct budget_patch *budget = (struct budget_patch*) dev->ext_priv;
- int err;
+ struct budget_patch *budget = (struct budget_patch*) dev->ext_priv;
+ int err;
if (budget->dvb_frontend) dvb_unregister_frontend(budget->dvb_frontend);
- err = ttpci_budget_deinit (budget);
+ err = ttpci_budget_deinit (budget);
- kfree (budget);
+ kfree (budget);
- return err;
+ return err;
}
static int __init budget_patch_init(void)
@@ -727,20 +727,20 @@ static int __init budget_patch_init(void)
static void __exit budget_patch_exit(void)
{
- saa7146_unregister_extension(&budget_extension);
+ saa7146_unregister_extension(&budget_extension);
}
static struct saa7146_extension budget_extension = {
- .name = "budget_patch dvb\0",
- .flags = 0,
+ .name = "budget_patch dvb\0",
+ .flags = 0,
- .module = THIS_MODULE,
- .pci_tbl = pci_tbl,
- .attach = budget_patch_attach,
- .detach = budget_patch_detach,
+ .module = THIS_MODULE,
+ .pci_tbl = pci_tbl,
+ .attach = budget_patch_attach,
+ .detach = budget_patch_detach,
- .irq_mask = MASK_10,
- .irq_func = ttpci_budget_irq10_handler,
+ .irq_mask = MASK_10,
+ .irq_func = ttpci_budget_irq10_handler,
};
module_init(budget_patch_init);
@@ -749,4 +749,4 @@ module_exit(budget_patch_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Emard, Roberto Deza, Holger Waechtler, Michael Hunold, others");
MODULE_DESCRIPTION("Driver for full TS modified DVB-S SAA7146+AV7110 "
- "based so-called Budget Patch cards");
+ "based so-called Budget Patch cards");
diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c
index bc4ce7559cb..fafe6407b3d 100644
--- a/drivers/media/dvb/ttpci/budget.c
+++ b/drivers/media/dvb/ttpci/budget.c
@@ -256,7 +256,7 @@ static int alps_bsrv2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_param
buf[2] = ((div & 0x18000) >> 10) | 0x95;
buf[3] = (pwr << 6) | 0x30;
- // NOTE: since we're using a prescaler of 2, we set the
+ // NOTE: since we're using a prescaler of 2, we set the
// divisor frequency to 62.5kHz and divide by 125 above
if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
@@ -565,7 +565,7 @@ static u8 read_pwm(struct budget* budget)
struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 },
{ .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} };
- if ((i2c_transfer(&budget->i2c_adap, msg, 2) != 2) || (pwm == 0xff))
+ if ((i2c_transfer(&budget->i2c_adap, msg, 2) != 2) || (pwm == 0xff))
pwm = 0x48;
return pwm;
@@ -593,7 +593,7 @@ static void frontend_init(struct budget *budget)
budget->dvb_frontend = ves1x93_attach(&alps_bsrv2_config, &budget->i2c_adap);
if (budget->dvb_frontend) {
budget->dvb_frontend->ops->diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
- budget->dvb_frontend->ops->diseqc_send_burst = budget_diseqc_send_burst;
+ budget->dvb_frontend->ops->diseqc_send_burst = budget_diseqc_send_burst;
budget->dvb_frontend->ops->set_tone = budget_set_tone;
break;
}
diff --git a/drivers/media/dvb/ttpci/budget.h b/drivers/media/dvb/ttpci/budget.h
index c6ef496ba70..c8d48cfba27 100644
--- a/drivers/media/dvb/ttpci/budget.h
+++ b/drivers/media/dvb/ttpci/budget.h
@@ -19,7 +19,7 @@ extern int budget_debug;
#endif
#define dprintk(level,args...) \
- do { if ((budget_debug & level)) { printk("%s: %s(): ",__stringify(KBUILD_MODNAME), __FUNCTION__); printk(args); } } while (0)
+ do { if ((budget_debug & level)) { printk("%s: %s(): ", KBUILD_MODNAME, __FUNCTION__); printk(args); } } while (0)
struct budget_info {
char *name;
diff --git a/drivers/media/dvb/ttpci/fdump.c b/drivers/media/dvb/ttpci/fdump.c
index 0b478db3e74..c90001d35e7 100644
--- a/drivers/media/dvb/ttpci/fdump.c
+++ b/drivers/media/dvb/ttpci/fdump.c
@@ -36,7 +36,7 @@ int main(int argc, char **argv)
}
fprintf(fd_out, "\n};\n\n");
-
+
fclose(fd_in);
fclose(fd_out);
diff --git a/drivers/media/dvb/ttpci/ttpci-eeprom.c b/drivers/media/dvb/ttpci/ttpci-eeprom.c
index ac79ef178c0..18aa22b5478 100644
--- a/drivers/media/dvb/ttpci/ttpci-eeprom.c
+++ b/drivers/media/dvb/ttpci/ttpci-eeprom.c
@@ -13,7 +13,7 @@
Holger Waechtler Convergence
Copyright (C) 2002-2003 Ralph Metzler <rjkm@metzlerbros.de>
- Metzler Brothers Systementwicklung GbR
+ Metzler Brothers Systementwicklung GbR
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -48,41 +48,41 @@
static int check_mac_tt(u8 *buf)
{
- int i;
- u16 tmp = 0xffff;
-
- for (i = 0; i < 8; i++) {
- tmp = (tmp << 8) | ((tmp >> 8) ^ buf[i]);
- tmp ^= (tmp >> 4) & 0x0f;
- tmp ^= (tmp << 12) ^ ((tmp & 0xff) << 5);
- }
- tmp ^= 0xffff;
- return (((tmp >> 8) ^ buf[8]) | ((tmp & 0xff) ^ buf[9]));
+ int i;
+ u16 tmp = 0xffff;
+
+ for (i = 0; i < 8; i++) {
+ tmp = (tmp << 8) | ((tmp >> 8) ^ buf[i]);
+ tmp ^= (tmp >> 4) & 0x0f;
+ tmp ^= (tmp << 12) ^ ((tmp & 0xff) << 5);
+ }
+ tmp ^= 0xffff;
+ return (((tmp >> 8) ^ buf[8]) | ((tmp & 0xff) ^ buf[9]));
}
static int getmac_tt(u8 * decodedMAC, u8 * encodedMAC)
{
- u8 xor[20] = { 0x72, 0x23, 0x68, 0x19, 0x5c, 0xa8, 0x71, 0x2c,
+ u8 xor[20] = { 0x72, 0x23, 0x68, 0x19, 0x5c, 0xa8, 0x71, 0x2c,
0x54, 0xd3, 0x7b, 0xf1, 0x9E, 0x23, 0x16, 0xf6,
0x1d, 0x36, 0x64, 0x78};
- u8 data[20];
- int i;
+ u8 data[20];
+ int i;
/* In case there is a sig check failure have the orig contents available */
memcpy(data, encodedMAC, 20);
for (i = 0; i < 20; i++)
- data[i] ^= xor[i];
- for (i = 0; i < 10; i++)
- data[i] = ((data[2 * i + 1] << 8) | data[2 * i])
+ data[i] ^= xor[i];
+ for (i = 0; i < 10; i++)
+ data[i] = ((data[2 * i + 1] << 8) | data[2 * i])
>> ((data[2 * i + 1] >> 6) & 3);
- if (check_mac_tt(data))
- return -ENODEV;
+ if (check_mac_tt(data))
+ return -ENODEV;
decodedMAC[0] = data[2]; decodedMAC[1] = data[1]; decodedMAC[2] = data[0];
decodedMAC[3] = data[6]; decodedMAC[4] = data[5]; decodedMAC[5] = data[4];
- return 0;
+ return 0;
}
static int ttpci_eeprom_read_encodedMAC(struct i2c_adapter *adapter, u8 * encodedMAC)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 03:58:31 +0000