diff options
Diffstat (limited to 'drivers/media/dvb')
| -rw-r--r-- | drivers/media/dvb/cinergyT2/cinergyT2.c | 7 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-core/dvb_frontend.c | 2 | ||||
| -rw-r--r-- | drivers/media/dvb/frontends/tda10086.c | 4 | ||||
| -rw-r--r-- | drivers/media/dvb/ttpci/budget-patch.c | 8 | ||||
| -rw-r--r-- | drivers/media/dvb/ttpci/budget.c | 9 | ||||
| -rw-r--r-- | drivers/media/dvb/ttusb-dec/ttusb_dec.c | 3 |
6 files changed, 22 insertions, 11 deletions
diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c index ff7d4f56ced..8a7dd507cf6 100644 --- a/drivers/media/dvb/cinergyT2/cinergyT2.c +++ b/drivers/media/dvb/cinergyT2/cinergyT2.c @@ -30,6 +30,7 @@ #include <linux/input.h> #include <linux/dvb/frontend.h> #include <linux/mutex.h> +#include <linux/mm.h> #include "dmxdev.h" #include "dvb_demux.h" @@ -275,8 +276,7 @@ static void cinergyt2_free_stream_urbs (struct cinergyt2 *cinergyt2) int i; for (i=0; i<STREAM_URB_COUNT; i++) - if (cinergyt2->stream_urb[i]) - usb_free_urb(cinergyt2->stream_urb[i]); + usb_free_urb(cinergyt2->stream_urb[i]); usb_buffer_free(cinergyt2->udev, STREAM_URB_COUNT*STREAM_BUF_SIZE, cinergyt2->streambuf, cinergyt2->streambuf_dmahandle); @@ -320,8 +320,7 @@ static void cinergyt2_stop_stream_xfer (struct cinergyt2 *cinergyt2) cinergyt2_control_stream_transfer(cinergyt2, 0); for (i=0; i<STREAM_URB_COUNT; i++) - if (cinergyt2->stream_urb[i]) - usb_kill_urb(cinergyt2->stream_urb[i]); + usb_kill_urb(cinergyt2->stream_urb[i]); } static int cinergyt2_start_stream_xfer (struct cinergyt2 *cinergyt2) diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 53304e6991a..a2ab2eebfc6 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -348,7 +348,7 @@ static int dvb_frontend_swzigzag_autotune(struct dvb_frontend *fe, int check_wra static void dvb_frontend_swzigzag(struct dvb_frontend *fe) { - fe_status_t s; + fe_status_t s = 0; struct dvb_frontend_private *fepriv = fe->frontend_priv; /* if we've got no parameters, just keep idling */ diff --git a/drivers/media/dvb/frontends/tda10086.c b/drivers/media/dvb/frontends/tda10086.c index 7456b0b9976..4c27a2d90a3 100644 --- a/drivers/media/dvb/frontends/tda10086.c +++ b/drivers/media/dvb/frontends/tda10086.c @@ -441,6 +441,10 @@ static int tda10086_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_pa dprintk ("%s\n", __FUNCTION__); + // check for invalid symbol rate + if (fe_params->u.qpsk.symbol_rate < 500000) + return -EINVAL; + // calculate the updated frequency (note: we convert from Hz->kHz) tmp64 = tda10086_read_byte(state, 0x52); tmp64 |= (tda10086_read_byte(state, 0x51) << 8); diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c index fc1267b8c89..9a155396d6a 100644 --- a/drivers/media/dvb/ttpci/budget-patch.c +++ b/drivers/media/dvb/ttpci/budget-patch.c @@ -500,14 +500,14 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte /* New design (By Emard) ** this rps1 code will copy internal HS event to GPIO3 pin. -** GPIO3 is in budget-patch hardware connectd to port B VSYNC +** GPIO3 is in budget-patch hardware connected to port B VSYNC ** HS is an internal event of 7146, accessible with RPS ** and temporarily raised high every n lines ** (n in defined in the RPS_THRESH1 counter threshold) ** I think HS is raised high on the beginning of the n-th line ** and remains high until this n-th line that triggered -** it is completely received. When the receiption of n-th line +** it is completely received. When the reception of n-th line ** ends, HS is lowered. ** To transmit data over DMA, 7146 needs changing state at @@ -541,7 +541,7 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte ** hardware debug note: a working budget card (including budget patch) ** with vpeirq() interrupt setup in mode "0x90" (every 64K) will ** generate 3 interrupts per 25-Hz DMA frame of 2*188*512 bytes -** and that means 3*25=75 Hz of interrupt freqency, as seen by +** and that means 3*25=75 Hz of interrupt frequency, as seen by ** watch cat /proc/interrupts ** ** If this frequency is 3x lower (and data received in the DMA @@ -550,7 +550,7 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte ** this means VSYNC line is not connected in the hardware. ** (check soldering pcb and pins) ** The same behaviour of missing VSYNC can be duplicated on budget -** cards, by seting DD1_INIT trigger mode 7 in 3rd nibble. +** cards, by setting DD1_INIT trigger mode 7 in 3rd nibble. */ // Setup RPS1 "program" (p35) diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c index e58f0391e9d..56f1c80defc 100644 --- a/drivers/media/dvb/ttpci/budget.c +++ b/drivers/media/dvb/ttpci/budget.c @@ -46,6 +46,10 @@ #include "lnbp21.h" #include "bsru6.h" +static int diseqc_method; +module_param(diseqc_method, int, 0444); +MODULE_PARM_DESC(diseqc_method, "Select DiSEqC method for subsystem id 13c2:1003, 0: default, 1: more reliable (for newer revisions only)"); + static void Set22K (struct budget *budget, int state) { struct saa7146_dev *dev=budget->dev; @@ -382,6 +386,11 @@ static void frontend_init(struct budget *budget) if (budget->dvb_frontend) { budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params; budget->dvb_frontend->tuner_priv = &budget->i2c_adap; + if (budget->dev->pci->subsystem_device == 0x1003 && diseqc_method == 0) { + budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd; + budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst; + budget->dvb_frontend->ops.set_tone = budget_set_tone; + } break; } break; diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c index a1c9fa9919e..8135f3e76ae 100644 --- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c +++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c @@ -1135,8 +1135,7 @@ static void ttusb_dec_free_iso_urbs(struct ttusb_dec *dec) dprintk("%s\n", __FUNCTION__); for (i = 0; i < ISO_BUF_COUNT; i++) - if (dec->iso_urb[i]) - usb_free_urb(dec->iso_urb[i]); + usb_free_urb(dec->iso_urb[i]); pci_free_consistent(NULL, ISO_FRAME_SIZE * (FRAMES_PER_ISO_BUF * |