diff options
Diffstat (limited to 'drivers/media/video/em28xx/em28xx-cards.c')
| -rw-r--r-- | drivers/media/video/em28xx/em28xx-cards.c | 72 |
1 files changed, 57 insertions, 15 deletions
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 58f7b4194a0..4e22fc4889e 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -72,6 +72,24 @@ struct em28xx_board em28xx_boards[] = { .amux = 1, }}, }, + [EM2820_BOARD_KWORLD_PVRTV2800RF] = { + .name = "Kworld PVR TV 2800 RF", + .is_em2800 = 0, + .vchannels = 2, + .norm = VIDEO_MODE_PAL, + .tda9887_conf = TDA9887_PRESENT, + .has_tuner = 1, + .decoder = EM28XX_SAA7113, + .input = {{ + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = 0, + .amux = 1, + },{ + .type = EM28XX_VMUX_SVIDEO, + .vmux = 9, + .amux = 1, + }}, + }, [EM2820_BOARD_TERRATEC_CINERGY_250] = { .name = "Terratec Cinergy 250 USB", .vchannels = 3, @@ -83,7 +101,7 @@ struct em28xx_board em28xx_boards[] = { .input = {{ .type = EM28XX_VMUX_TELEVISION, .vmux = 2, - .amux = 0, + .amux = 1, },{ .type = EM28XX_VMUX_COMPOSITE1, .vmux = 0, @@ -257,27 +275,51 @@ struct usb_device_id em28xx_id_table [] = { { }, }; +void em28xx_pre_card_setup(struct em28xx *dev) +{ + /* request some modules */ + switch(dev->model){ + case EM2880_BOARD_TERRATEC_PRODIGY_XS: + case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: + case EM2880_BOARD_TERRATEC_HYBRID_XS: + { + em28xx_write_regs_req(dev, 0x00, 0x08, "\x7d", 1); // reset through GPIO? + break; + } + } +} + void em28xx_card_setup(struct em28xx *dev) { /* request some modules */ - if (dev->model == EM2820_BOARD_HAUPPAUGE_WINTV_USB_2) { - struct tveeprom tv; + switch(dev->model){ + case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2: + { + struct tveeprom tv; #ifdef CONFIG_MODULES - request_module("tveeprom"); - request_module("ir-kbd-i2c"); - request_module("msp3400"); + request_module("tveeprom"); + request_module("ir-kbd-i2c"); + request_module("msp3400"); #endif - /* Call first TVeeprom */ + /* Call first TVeeprom */ + + dev->i2c_client.addr = 0xa0 >> 1; + tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata); - dev->i2c_client.addr = 0xa0 >> 1; - tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata); + dev->tuner_type= tv.tuner_type; + if (tv.audio_processor == AUDIO_CHIP_MSP34XX) { + dev->i2s_speed=2048000; + dev->has_msp34xx=1; + } else + dev->has_msp34xx=0; + break; + } + case EM2820_BOARD_KWORLD_PVRTV2800RF: + { + em28xx_write_regs_req(dev,0x00,0x08, "\xf9", 1); // GPIO enables sound on KWORLD PVR TV 2800RF + break; + } - dev->tuner_type= tv.tuner_type; - if (tv.audio_processor == AUDIO_CHIP_MSP34XX) { - dev->i2s_speed=2048000; - dev->has_msp34xx=1; - } else - dev->has_msp34xx=0; } } |