aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/video
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/video')
-rw-r--r--drivers/media/video/cx18/cx18-cards.c18
-rw-r--r--drivers/media/video/cx18/cx18-dvb.c53
2 files changed, 57 insertions, 14 deletions
diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c
index ae631aa2cd3..c92a25036f0 100644
--- a/drivers/media/video/cx18/cx18-cards.c
+++ b/drivers/media/video/cx18/cx18-cards.c
@@ -369,10 +369,7 @@ static const struct cx18_card cx18_card_leadtek_pvr2100 = {
},
.radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 },
.ddr = {
- /*
- * Pointer to proper DDR config values provided by
- * Terry Wu <terrywu at leadtek.com.tw>
- */
+ /* Pointer to proper DDR config values provided by Terry Wu */
.chip_config = 0x303,
.refresh = 0x3bb,
.timing1 = 0x24220e83,
@@ -401,13 +398,13 @@ static const struct cx18_card_pci_info cx18_pci_leadtek_dvr3100h[] = {
static const struct cx18_card cx18_card_leadtek_dvr3100h = {
.type = CX18_CARD_LEADTEK_DVR3100H,
.name = "Leadtek WinFast DVR3100 H",
- .comment = "Experimenters and photos needed for device to work well.\n"
- "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
+ .comment = "Simultaneous DVB-T and Analog capture supported,\n"
+ "\texcept when capturing Analog from the antenna input.\n",
.v4l2_capabilities = CX18_CAP_ENCODER,
.hw_audio_ctrl = CX18_HW_418_AV,
.hw_muxer = CX18_HW_GPIO_MUX,
.hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_MUX |
- CX18_HW_GPIO_RESET_CTRL,
+ CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL,
.video_inputs = {
{ CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 },
{ CX18_CARD_INPUT_SVIDEO1, 1,
@@ -424,10 +421,7 @@ static const struct cx18_card cx18_card_leadtek_dvr3100h = {
},
.radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 },
.ddr = {
- /*
- * Pointer to proper DDR config values provided by
- * Terry Wu <terrywu at leadtek.com.tw>
- */
+ /* Pointer to proper DDR config values provided by Terry Wu */
.chip_config = 0x303,
.refresh = 0x3bb,
.timing1 = 0x24220e83,
@@ -439,7 +433,7 @@ static const struct cx18_card cx18_card_leadtek_dvr3100h = {
.gpio_init.direction = 0x7,
.gpio_audio_input = { .mask = 0x7,
.tuner = 0x6, .linein = 0x2, .radio = 0x2 },
- .xceive_pin = 15,
+ .xceive_pin = 1,
.pci_list = cx18_pci_leadtek_dvr3100h,
.i2c = &cx18_i2c_std,
};
diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c
index e7285a1096f..6ea3fe623ef 100644
--- a/drivers/media/video/cx18/cx18-dvb.c
+++ b/drivers/media/video/cx18/cx18-dvb.c
@@ -26,12 +26,17 @@
#include "cx18-queue.h"
#include "cx18-streams.h"
#include "cx18-cards.h"
+#include "cx18-gpio.h"
#include "s5h1409.h"
#include "mxl5005s.h"
+#include "zl10353.h"
+#include "tuner-xc2028.h"
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
#define CX18_REG_DMUX_NUM_PORT_0_CONTROL 0xd5a000
+#define CX18_CLOCK_ENABLE2 0xc71024
+#define CX18_DMUX_CLK_MASK 0x0080
static struct mxl5005s_config hauppauge_hvr1600_tuner = {
.i2c_address = 0xC6 >> 1,
@@ -58,7 +63,15 @@ static struct s5h1409_config hauppauge_hvr1600_config = {
.inversion = S5H1409_INVERSION_OFF,
.status_mode = S5H1409_DEMODLOCKING,
.mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK
+};
+/* Information/confirmation of proper config values provided by Terry Wu */
+static struct zl10353_config leadtek_dvr3100h_demod = {
+ .demod_address = 0x1e >> 1, /* Datasheet suggested straps */
+ .if2 = 45600, /* 4.560 MHz IF from the XC3028 */
+ .parallel_ts = 1, /* Not a serial TS */
+ .no_tuner = 1, /* XC3028 is not behind the gate */
+ .disable_i2c_gate_ctrl = 1, /* Disable the I2C gate */
};
static int dvb_register(struct cx18_stream *stream);
@@ -99,6 +112,7 @@ static int cx18_dvb_start_feed(struct dvb_demux_feed *feed)
cx18_write_reg(cx, v, CX18_REG_DMUX_NUM_PORT_0_CONTROL);
break;
+ case CX18_CARD_LEADTEK_DVR3100H:
default:
/* Assumption - Parallel transport - Signalling
* undefined or default.
@@ -268,8 +282,7 @@ void cx18_dvb_unregister(struct cx18_stream *stream)
}
/* All the DVB attach calls go here, this function get's modified
- * for each new card. No other function in this file needs
- * to change.
+ * for each new card. cx18_dvb_start_feed() will also need changes.
*/
static int dvb_register(struct cx18_stream *stream)
{
@@ -290,6 +303,29 @@ static int dvb_register(struct cx18_stream *stream)
ret = 0;
}
break;
+ case CX18_CARD_LEADTEK_DVR3100H:
+ dvb->fe = dvb_attach(zl10353_attach,
+ &leadtek_dvr3100h_demod,
+ &cx->i2c_adap[1]);
+ if (dvb->fe != NULL) {
+ struct dvb_frontend *fe;
+ struct xc2028_config cfg = {
+ .i2c_adap = &cx->i2c_adap[1],
+ .i2c_addr = 0xc2 >> 1,
+ .ctrl = NULL,
+ };
+ static struct xc2028_ctrl ctrl = {
+ .fname = XC2028_DEFAULT_FIRMWARE,
+ .max_len = 64,
+ .demod = XC3028_FE_ZARLINK456,
+ .type = XC2028_AUTO,
+ };
+
+ fe = dvb_attach(xc2028_attach, dvb->fe, &cfg);
+ if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+ fe->ops.tuner_ops.set_config(fe, &ctrl);
+ }
+ break;
default:
/* No Digital Tv Support */
break;
@@ -300,6 +336,8 @@ static int dvb_register(struct cx18_stream *stream)
return -1;
}
+ dvb->fe->callback = cx18_reset_tuner_gpio;
+
ret = dvb_register_frontend(&dvb->dvb_adapter, dvb->fe);
if (ret < 0) {
if (dvb->fe->ops.release)
@@ -307,5 +345,16 @@ static int dvb_register(struct cx18_stream *stream)
return ret;
}
+ /*
+ * The firmware seems to enable the TS DMUX clock
+ * under various circumstances. However, since we know we
+ * might use it, let's just turn it on ourselves here.
+ */
+ cx18_write_reg_expect(cx,
+ (CX18_DMUX_CLK_MASK << 16) | CX18_DMUX_CLK_MASK,
+ CX18_CLOCK_ENABLE2,
+ CX18_DMUX_CLK_MASK,
+ (CX18_DMUX_CLK_MASK << 16) | CX18_DMUX_CLK_MASK);
+
return ret;
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 17:18:08 +0000