diff options
Diffstat (limited to 'drivers/media')
| -rw-r--r-- | drivers/media/video/Kconfig | 6 | ||||
| -rw-r--r-- | drivers/media/video/Makefile | 1 | ||||
| -rw-r--r-- | drivers/media/video/bt866.c | 377 | ||||
| -rw-r--r-- | drivers/media/video/ks0127.c | 846 | ||||
| -rw-r--r-- | drivers/media/video/ks0127.h | 53 | ||||
| -rw-r--r-- | drivers/media/video/zoran.h | 8 | ||||
| -rw-r--r-- | drivers/media/video/zoran_card.c | 87 |
7 files changed, 1377 insertions, 1 deletions
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 6b419701856..515e16acf0d 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -224,6 +224,12 @@ config VIDEO_ZORAN_LML33R10 support for the Linux Media Labs LML33R10 MJPEG capture/playback card. +config VIDEO_ZORAN_AVS6EYES + tristate "AverMedia 6 Eyes support (EXPERIMENTAL)" + depends on VIDEO_ZORAN && EXPERIMENTAL && VIDEO_V4L1 + help + Support for the AverMedia 6 Eyes video surveillance card. + config VIDEO_ZR36120 tristate "Zoran ZR36120/36125 Video For Linux" depends on PCI && I2C && VIDEO_V4L1 && BROKEN diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index e5bf2687b76..97e89907443 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -33,6 +33,7 @@ obj-$(CONFIG_VIDEO_ZORAN_DC30) += adv7175.o vpx3220.o zr36050.o \ zr36016.o obj-$(CONFIG_VIDEO_ZORAN_LML33) += bt819.o bt856.o zr36060.o obj-$(CONFIG_VIDEO_ZORAN_LML33R10) += saa7114.o adv7170.o zr36060.o +obj-$(CONFIG_VIDEO_ZORAN_AVS6EYES) += bt866.o ks0127.o zr36060.o obj-$(CONFIG_VIDEO_ZORAN) += zr36067.o videocodec.o obj-$(CONFIG_VIDEO_PMS) += pms.o obj-$(CONFIG_VIDEO_PLANB) += planb.o diff --git a/drivers/media/video/bt866.c b/drivers/media/video/bt866.c new file mode 100644 index 00000000000..05e42bbcfc3 --- /dev/null +++ b/drivers/media/video/bt866.c @@ -0,0 +1,377 @@ +/* + bt866 - BT866 Digital Video Encoder (Rockwell Part) + + Copyright (C) 1999 Mike Bernson <mike@mlb.org> + Copyright (C) 1998 Dave Perks <dperks@ibm.net> + + Modifications for LML33/DC10plus unified driver + Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx> + + This code was modify/ported from the saa7111 driver written + by Dave Perks. + + This code was adapted for the bt866 by Christer Weinigel and ported + to 2.6 by Martin Samuelsson. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/kernel.h> +#include <linux/major.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/pci.h> +#include <linux/signal.h> +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <linux/sched.h> +#include <linux/types.h> +#include <linux/i2c.h> + +#include <linux/videodev.h> +#include <asm/uaccess.h> + +#include <linux/video_encoder.h> + +MODULE_LICENSE("GPL"); + +#define BT866_DEVNAME "bt866" +#define I2C_BT866 0x88 + +MODULE_LICENSE("GPL"); + +#define DEBUG(x) /* Debug driver */ + +/* ----------------------------------------------------------------------- */ + +struct bt866 { + struct i2c_client *i2c; + int addr; + unsigned char reg[128]; + + int norm; + int enable; + int bright; + int contrast; + int hue; + int sat; +}; + +static int bt866_write(struct bt866 *dev, + unsigned char subaddr, unsigned char data); + +static int bt866_do_command(struct bt866 *encoder, + unsigned int cmd, void *arg) +{ + switch (cmd) { + case ENCODER_GET_CAPABILITIES: + { + struct video_encoder_capability *cap = arg; + + DEBUG(printk + (KERN_INFO "%s: get capabilities\n", + encoder->i2c->name)); + + cap->flags + = VIDEO_ENCODER_PAL + | VIDEO_ENCODER_NTSC + | VIDEO_ENCODER_CCIR; + cap->inputs = 2; + cap->outputs = 1; + } + break; + + case ENCODER_SET_NORM: + { + int *iarg = arg; + + DEBUG(printk(KERN_INFO "%s: set norm %d\n", + encoder->i2c->name, *iarg)); + + switch (*iarg) { + + case VIDEO_MODE_NTSC: + break; + + case VIDEO_MODE_PAL: + break; + + default: + return -EINVAL; + + } + encoder->norm = *iarg; + } + break; + + case ENCODER_SET_INPUT: + { + int *iarg = arg; + static const __u8 init[] = { + 0xc8, 0xcc, /* CRSCALE */ + 0xca, 0x91, /* CBSCALE */ + 0xcc, 0x24, /* YC16 | OSDNUM */ + 0xda, 0x00, /* */ + 0xdc, 0x24, /* SETMODE | PAL */ + 0xde, 0x02, /* EACTIVE */ + + /* overlay colors */ + 0x70, 0xEB, 0x90, 0x80, 0xB0, 0x80, /* white */ + 0x72, 0xA2, 0x92, 0x8E, 0xB2, 0x2C, /* yellow */ + 0x74, 0x83, 0x94, 0x2C, 0xB4, 0x9C, /* cyan */ + 0x76, 0x70, 0x96, 0x3A, 0xB6, 0x48, /* green */ + 0x78, 0x54, 0x98, 0xC6, 0xB8, 0xB8, /* magenta */ + 0x7A, 0x41, 0x9A, 0xD4, 0xBA, 0x64, /* red */ + 0x7C, 0x23, 0x9C, 0x72, 0xBC, 0xD4, /* blue */ + 0x7E, 0x10, 0x9E, 0x80, 0xBE, 0x80, /* black */ + + 0x60, 0xEB, 0x80, 0x80, 0xc0, 0x80, /* white */ + 0x62, 0xA2, 0x82, 0x8E, 0xc2, 0x2C, /* yellow */ + 0x64, 0x83, 0x84, 0x2C, 0xc4, 0x9C, /* cyan */ + 0x66, 0x70, 0x86, 0x3A, 0xc6, 0x48, /* green */ + 0x68, 0x54, 0x88, 0xC6, 0xc8, 0xB8, /* magenta */ + 0x6A, 0x41, 0x8A, 0xD4, 0xcA, 0x64, /* red */ + 0x6C, 0x23, 0x8C, 0x72, 0xcC, 0xD4, /* blue */ + 0x6E, 0x10, 0x8E, 0x80, 0xcE, 0x80, /* black */ + }; + int i; + u8 val; + + for (i = 0; i < ARRAY_SIZE(init) / 2; i += 2) + bt866_write(encoder, init[i], init[i+1]); + + val = encoder->reg[0xdc]; + + if (*iarg == 0) + val |= 0x40; /* CBSWAP */ + else + val &= ~0x40; /* !CBSWAP */ + + bt866_write(encoder, 0xdc, val); + + val = encoder->reg[0xcc]; + if (*iarg == 2) + val |= 0x01; /* OSDBAR */ + else + val &= ~0x01; /* !OSDBAR */ + bt866_write(encoder, 0xcc, val); + + DEBUG(printk(KERN_INFO "%s: set input %d\n", + encoder->i2c->name, *iarg)); + + switch (*iarg) { + case 0: + break; + case 1: + break; + default: + return -EINVAL; + + } + } + break; + + case ENCODER_SET_OUTPUT: + { + int *iarg = arg; + + DEBUG(printk(KERN_INFO "%s: set output %d\n", + encoder->i2c->name, *iarg)); + + /* not much choice of outputs */ + if (*iarg != 0) + return -EINVAL; + } + break; + + case ENCODER_ENABLE_OUTPUT: + { + int *iarg = arg; + encoder->enable = !!*iarg; + + DEBUG(printk + (KERN_INFO "%s: enable output %d\n", + encoder->i2c->name, encoder->enable)); + } + break; + + case 4711: + { + int *iarg = arg; + __u8 val; + + printk("bt866: square = %d\n", *iarg); + + val = encoder->reg[0xdc]; + if (*iarg) + val |= 1; /* SQUARE */ + else + val &= ~1; /* !SQUARE */ + bt866_write(encoder, 0xdc, val); + break; + } + + default: + return -EINVAL; + } + + return 0; +} + +static int bt866_write(struct bt866 *encoder, + unsigned char subaddr, unsigned char data) +{ + unsigned char buffer[2]; + int err; + + buffer[0] = subaddr; + buffer[1] = data; + + encoder->reg[subaddr] = data; + + DEBUG(printk + ("%s: write 0x%02X = 0x%02X\n", + encoder->i2c->name, subaddr, data)); + + for (err = 0; err < 3;) { + if (i2c_master_send(encoder->i2c, buffer, 2) == 2) + break; + err++; + printk(KERN_WARNING "%s: I/O error #%d " + "(write 0x%02x/0x%02x)\n", + encoder->i2c->name, err, encoder->addr, subaddr); + schedule_timeout_interruptible(HZ/10); + } + if (err == 3) { + printk(KERN_WARNING "%s: giving up\n", + encoder->i2c->name); + return -1; + } + + return 0; +} + +static int bt866_attach(struct i2c_adapter *adapter); +static int bt866_detach(struct i2c_client *client); +static int bt866_command(struct i2c_client *client, + unsigned int cmd, void *arg); + + +/* Addresses to scan */ +static unsigned short normal_i2c[] = {I2C_BT866>>1, I2C_CLIENT_END}; +static unsigned short probe[2] = {I2C_CLIENT_END, I2C_CLIENT_END}; +static unsigned short ignore[2] = {I2C_CLIENT_END, I2C_CLIENT_END}; + +static struct i2c_client_address_data addr_data = { + normal_i2c, + probe, + ignore, +}; + +static struct i2c_driver i2c_driver_bt866 = { + .driver.name = BT866_DEVNAME, + .id = I2C_DRIVERID_BT866, + .attach_adapter = bt866_attach, + .detach_client = bt866_detach, + .command = bt866_command +}; + + +static struct i2c_client bt866_client_tmpl = +{ + .name = "(nil)", + .addr = 0, + .adapter = NULL, + .driver = &i2c_driver_bt866, + .usage_count = 0 +}; + +static int bt866_found_proc(struct i2c_adapter *adapter, + int addr, int kind) +{ + struct bt866 *encoder; + struct i2c_client *client; + + client = kzalloc(sizeof(*client), GFP_KERNEL); + if (client == NULL) + return -ENOMEM; + memcpy(client, &bt866_client_tmpl, sizeof(*client)); + + encoder = kzalloc(sizeof(*encoder), GFP_KERNEL); + if (encoder == NULL) { + kfree(client); + return -ENOMEM; + } + + i2c_set_clientdata(client, encoder); + client->adapter = adapter; + client->addr = addr; + sprintf(client->name, "%s-%02x", BT866_DEVNAME, adapter->id); + + encoder->i2c = client; + encoder->addr = addr; + //encoder->encoder_type = ENCODER_TYPE_UNKNOWN; + + /* initialize */ + + i2c_attach_client(client); + + return 0; +} + +static int bt866_attach(struct i2c_adapter *adapter) +{ + if (adapter->id == I2C_HW_B_ZR36067) + return i2c_probe(adapter, &addr_data, bt866_found_proc); + return 0; +} + +static int bt866_detach(struct i2c_client *client) +{ + struct bt866 *encoder = i2c_get_clientdata(client); + + i2c_detach_client(client); + kfree(encoder); + kfree(client); + + return 0; +} + +static int bt866_command(struct i2c_client *client, + unsigned int cmd, void *arg) +{ + struct bt866 *encoder = i2c_get_clientdata(client); + return bt866_do_command(encoder, cmd, arg); +} + +static int __devinit bt866_init(void) +{ + i2c_add_driver(&i2c_driver_bt866); + return 0; +} + +static void __devexit bt866_exit(void) +{ + i2c_del_driver(&i2c_driver_bt866); +} + +module_init(bt866_init); +module_exit(bt866_exit); diff --git a/drivers/media/video/ks0127.c b/drivers/media/video/ks0127.c new file mode 100644 index 00000000000..3bf7ac4f528 --- /dev/null +++ b/drivers/media/video/ks0127.c @@ -0,0 +1,846 @@ +/* + * Video Capture Driver (Video for Linux 1/2) + * for the Matrox Marvel G200,G400 and Rainbow Runner-G series + * + * This module is an interface to the KS0127 video decoder chip. + * + * Copyright (C) 1999 Ryan Drake <stiletto@mediaone.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + ***************************************************************************** + * + * Modified and extended by + * Mike Bernson <mike@mlb.org> + * Gerard v.d. Horst + * Leon van Stuivenberg <l.vanstuivenberg@chello.nl> + * Gernot Ziegler <gz@lysator.liu.se> + * + * Version History: + * V1.0 Ryan Drake Initial version by Ryan Drake + * V1.1 Gerard v.d. Horst Added some debugoutput, reset the video-standard + */ + +#ifndef __KERNEL__ +#define __KERNEL__ +#endif + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/proc_fs.h> +#include "ks0127.h" + +#include <linux/i2c.h> +#include <linux/video_decoder.h> + +#define dprintk if (debug) printk + +/* i2c identification */ +#define I2C_KS0127_ADDON 0xD8 +#define I2C_KS0127_ONBOARD 0xDA + +#define KS_TYPE_UNKNOWN 0 +#define KS_TYPE_0122S 1 +#define KS_TYPE_0127 2 +#define KS_TYPE_0127B 3 + +/* ks0127 control registers */ +#define KS_STAT 0x00 +#define KS_CMDA 0x01 +#define KS_CMDB 0x02 +#define KS_CMDC 0x03 +#define KS_CMDD 0x04 +#define KS_HAVB 0x05 +#define KS_HAVE 0x06 +#define KS_HS1B 0x07 +#define KS_HS1E 0x08 +#define KS_HS2B 0x09 +#define KS_HS2E 0x0a +#define KS_AGC 0x0b +#define KS_HXTRA 0x0c +#define KS_CDEM 0x0d +#define KS_PORTAB 0x0e +#define KS_LUMA 0x0f +#define KS_CON 0x10 +#define KS_BRT 0x11 +#define KS_CHROMA 0x12 +#define KS_CHROMB 0x13 +#define KS_DEMOD 0x14 +#define KS_SAT 0x15 +#define KS_HUE 0x16 +#define KS_VERTIA 0x17 +#define KS_VERTIB 0x18 +#define KS_VERTIC 0x19 +#define KS_HSCLL 0x1a +#define KS_HSCLH 0x1b +#define KS_VSCLL 0x1c +#define KS_VSCLH 0x1d +#define KS_OFMTA 0x1e +#define KS_OFMTB 0x1f +#define KS_VBICTL 0x20 +#define KS_CCDAT2 0x21 +#define KS_CCDAT1 0x22 +#define KS_VBIL30 0x23 +#define KS_VBIL74 0x24 +#define KS_VBIL118 0x25 +#define KS_VBIL1512 0x26 +#define KS_TTFRAM 0x27 +#define KS_TESTA 0x28 +#define KS_UVOFFH 0x29 +#define KS_UVOFFL 0x2a +#define KS_UGAIN 0x2b +#define KS_VGAIN 0x2c +#define KS_VAVB 0x2d +#define KS_VAVE 0x2e +#define KS_CTRACK 0x2f +#define KS_POLCTL 0x30 +#define KS_REFCOD 0x31 +#define KS_INVALY 0x32 +#define KS_INVALU 0x33 +#define KS_INVALV 0x34 +#define KS_UNUSEY 0x35 +#define KS_UNUSEU 0x36 +#define KS_UNUSEV 0x37 +#define KS_USRSAV 0x38 +#define KS_USREAV 0x39 +#define KS_SHS1A 0x3a +#define KS_SHS1B 0x3b +#define KS_SHS1C 0x3c +#define KS_CMDE 0x3d +#define KS_VSDEL 0x3e +#define KS_CMDF 0x3f +#define KS_GAMMA0 0x40 +#define KS_GAMMA1 0x41 +#define KS_GAMMA2 0x42 +#define KS_GAMMA3 0x43 +#define KS_GAMMA4 0x44 +#define KS_GAMMA5 0x45 +#define KS_GAMMA6 0x46 +#define KS_GAMMA7 0x47 +#define KS_GAMMA8 0x48 +#define KS_GAMMA9 0x49 +#define KS_GAMMA10 0x4a +#define KS_GAMMA11 0x4b +#define KS_GAMMA12 0x4c +#define KS_GAMMA13 0x4d +#define KS_GAMMA14 0x4e +#define KS_GAMMA15 0x4f +#define KS_GAMMA16 0x50 +#define KS_GAMMA17 0x51 +#define KS_GAMMA18 0x52 +#define KS_GAMMA19 0x53 +#define KS_GAMMA20 0x54 +#define KS_GAMMA21 0x55 +#define KS_GAMMA22 0x56 +#define KS_GAMMA23 0x57 +#define KS_GAMMA24 0x58 +#define KS_GAMMA25 0x59 +#define KS_GAMMA26 0x5a +#define KS_GAMMA27 0x5b +#define KS_GAMMA28 0x5c +#define KS_GAMMA29 0x5d +#define KS_GAMMA30 0x5e +#define KS_GAMMA31 0x5f +#define KS_GAMMAD0 0x60 +#define KS_GAMMAD1 0x61 +#define KS_GAMMAD2 0x62 +#define KS_GAMMAD3 0x63 +#define KS_GAMMAD4 0x64 +#define KS_GAMMAD5 0x65 +#define KS_GAMMAD6 0x66 +#define KS_GAMMAD7 0x67 +#define KS_GAMMAD8 0x68 +#define KS_GAMMAD9 0x69 +#define KS_GAMMAD10 0x6a +#define KS_GAMMAD11 0x6b +#define KS_GAMMAD12 0x6c +#define KS_GAMMAD13 0x6d +#define KS_GAMMAD14 0x6e +#define KS_GAMMAD15 0x6f +#define KS_GAMMAD16 0x70 +#define KS_GAMMAD17 0x71 +#define KS_GAMMAD18 0x72 +#define KS_GAMMAD19 0x73 +#define KS_GAMMAD20 0x74 +#define KS_GAMMAD21 0x75 +#define KS_GAMMAD22 0x76 +#define KS_GAMMAD23 0x77 +#define KS_GAMMAD24 0x78 +#define KS_GAMMAD25 0x79 +#define KS_GAMMAD26 0x7a +#define KS_GAMMAD27 0x7b +#define KS_GAMMAD28 0x7c +#define KS_GAMMAD29 0x7d +#define KS_GAMMAD30 0x7e +#define KS_GAMMAD31 0x7f + + +/**************************************************************************** +* mga_dev : represents one ks0127 chip. +****************************************************************************/ + +struct adjust { + int contrast; + int bright; + int hue; + int ugain; + int vgain; +}; + +struct ks0127 { + struct i2c_client *client; + unsigned char addr; + int format_width; + int format_height; + int cap_width; + int cap_height; + int norm; + int ks_type; + u8 regs[256]; +}; + + +static int debug; /* insmod parameter */ + +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug output"); +MODULE_LICENSE("GPL"); + +static u8 reg_defaults[64]; + + + +static void init_reg_defaults(void) +{ + u8 *table = reg_defaults; + + table[KS_CMDA] = 0x2c; /* VSE=0, CCIR 601, autodetect standard */ + table[KS_CMDB] = 0x12; /* VALIGN=0, AGC control and input */ + table[KS_CMDC] = 0x00; /* Test options */ + /* clock & input select, write 1 to PORTA */ + table[KS_CMDD] = 0x01; + table[KS_HAVB] = 0x00; /* HAV Start Control */ + table[KS_HAVE] = 0x00; /* HAV End Control */ + table[KS_HS1B] = 0x10; /* HS1 Start Control */ + table[KS_HS1E] = 0x00; /* HS1 End Control */ + table[KS_HS2B] = 0x00; /* HS2 Start Control */ + table[KS_HS2E] = 0x00; /* HS2 End Control */ + table[KS_AGC] = 0x53; /* Manual setting for AGC */ + table[KS_HXTRA] = 0x00; /* Extra Bits for HAV and HS1/2 */ + table[KS_CDEM] = 0x00; /* Chroma Demodulation Control */ + table[KS_PORTAB] = 0x0f; /* port B is input, port A output GPPORT */ + table[KS_LUMA] = 0x01; /* Luma control */ + table[KS_CON] = 0x00; /* Contrast Control */ + table[KS_BRT] = 0x00; /* Brightness Control */ + table[KS_CHROMA] = 0x2a; /* Chroma control A */ + table[KS_CHROMB] = 0x90; /* Chroma control B */ + table[KS_DEMOD] = 0x00; /* Chroma Demodulation Control & Status */ + table[KS_SAT] = 0x00; /* Color Saturation Control*/ + table[KS_HUE] = 0x00; /* Hue Control */ + table[KS_VERTIA] = 0x00; /* Vertical Processing Control A */ + /* Vertical Processing Control B, luma 1 line delayed */ + table[KS_VERTIB] = 0x12; + table[KS_VERTIC] = 0x0b; /* Vertical Processing Control C */ + table[KS_HSCLL] = 0x00; /* Horizontal Scaling Ratio Low */ + table[KS_HSCLH] = 0x00; /* Horizontal Scaling Ratio High */ + table[KS_VSCLL] = 0x00; /* Vertical Scaling Ratio Low */ + table[KS_VSCLH] = 0x00; /* Vertical Scaling Ratio High */ + /* 16 bit YCbCr 4:2:2 output; I can't make the bt866 like 8 bit /Sam */ + table[KS_OFMTA] = 0x30; + table[KS_OFMTB] = 0x00; /* Output Control B */ + /* VBI Decoder Control; 4bit fmt: avoid Y overflow */ + table[KS_VBICTL] = 0x5d; + table[KS_CCDAT2] = 0x00; /* Read Only register */ + table[KS_CCDAT1] = 0x00; /* Read Only register */ + table[KS_VBIL30] = 0xa8; /* VBI data decoding options */ + table[KS_VBIL74] = 0xaa; /* VBI data decoding options */ + table[KS_VBIL118] = 0x2a; /* VBI data decoding options */ + table[KS_VBIL1512] = 0x00; /* VBI data decoding options */ + table[KS_TTFRAM] = 0x00; /* Teletext frame alignment pattern */ + table[KS_TESTA] = 0x00; /* test register, shouldn't be written */ + table[KS_UVOFFH] = 0x00; /* UV Offset Adjustment High */ + table[KS_UVOFFL] = 0x00; /* UV Offset Adjustment Low */ + table[KS_UGAIN] = 0x00; /* U Component Gain Adjustment */ + table[KS_VGAIN] = 0x00; /* V Component Gain Adjustment */ + table[KS_VAVB] = 0x07; /* VAV Begin */ + table[KS_VAVE] = 0x00; /* VAV End */ + table[KS_CTRACK] = 0x00; /* Chroma Tracking Control */ + table[KS_POLCTL] = 0x41; /* Timing Signal Polarity Control */ + table[KS_REFCOD] = 0x80; /* Reference Code Insertion Control */ + table[KS_INVALY] = 0x10; /* Invalid Y Code */ + table[KS_INVALU] = 0x80; /* Invalid U Code */ + table[KS_INVALV] = 0x80; /* Invalid V Code */ + table[KS_UNUSEY] = 0x10; /* Unused Y Code */ + table[KS_UNUSEU] = 0x80; /* Unused U Code */ + table[KS_UNUSEV] = 0x80; /* Unused V Code */ + table[KS_USRSAV] = 0x00; /* reserved */ + table[KS_USREAV] = 0x00; /* reserved */ + table[KS_SHS1A] = 0x00; /* User Defined SHS1 A */ + /* User Defined SHS1 B, ALT656=1 on 0127B */ + table[KS_SHS1B] = 0x80; + table[KS_SHS1C] = 0x00; /* User Defined SHS1 C */ + table[KS_CMDE] = 0x00; /* Command Register E */ + table[KS_VSDEL] = 0x00; /* VS Delay Control */ + /* Command Register F, update -immediately- */ + /* (there might come no vsync)*/ + table[KS_CMDF] = 0x02; +} + + +/* We need to manually read because of a bug in the KS0127 chip. + * + * An explanation from kayork@mail.utexas.edu: + * + * During I2C reads, the KS0127 only samples for a stop condition + * during the place where the acknoledge bit should be. Any standard + * I2C implementation (correctly) throws in another clock transition + * at the 9th bit, and the KS0127 will not recognize the stop condition + * and will continue to clock out data. + * + * So we have to do the read ourself. Big deal. + workaround in i2c-algo-bit + */ + + +static u8 ks0127_read(struct ks0127 *ks, u8 reg) +{ + struct i2c_client *c = ks->client; + char val = 0; + struct i2c_msg msgs[] = { + {c->addr, 0, sizeof(reg), ®}, + {c->addr, I2C_M_RD | I2C_M_NO_RD_ACK, sizeof(val), &val}}; + int ret; + + ret = i2c_transfer(c->adapter, msgs, ARRAY_SIZE(msgs)); + if (ret != ARRAY_SIZE(msgs)) + dprintk("ks0127_write error\n"); + + return val; +} + + +static void ks0127_write(struct ks0127 *ks, u8 reg, u8 val) +{ + char msg[] = {reg, val}; + + if (i2c_master_send(ks->client, msg, sizeof(msg)) != sizeof(msg)) + dprintk("ks0127_write error\n"); + + ks->regs[reg] = val; +} + + +/* generic bit-twiddling */ +static void ks0127_and_or(struct ks0127 *ks, u8 reg, u8 and_v, u8 or_v) +{ + u8 val = ks->regs[reg]; + val = (val & and_v) | or_v; + ks0127_write(ks, reg, val); +} + + + +/**************************************************************************** +* ks0127 private api +****************************************************************************/ +static void ks0127_reset(struct ks0127* ks) +{ + int i; + u8 *table = reg_defaults; + + ks->ks_type = KS_TYPE_UNKNOWN; + + dprintk("ks0127: reset\n"); + msleep(1); + + /* initialize all registers to known values */ + /* (except STAT, 0x21, 0x22, TEST and 0x38,0x39) */ + + for(i = 1; i < 33; i++) + ks0127_write(ks, i, table[i]); + + for(i = 35; i < 40; i++) + ks0127_write(ks, i, table[i]); + + for(i = 41; i < 56; i++) + ks0127_write(ks, i, table[i]); + + for(i = 58; i < 64; i++) + ks0127_write(ks, i, table[i]); + + + if ((ks0127_read(ks, KS_STAT) & 0x80) == 0) { + ks->ks_type = KS_TYPE_0122S; + dprintk("ks0127: ks0122s Found\n"); + return; + } + + switch(ks0127_read(ks, KS_CMDE) & 0x0f) { + + case 0: + ks->ks_type = KS_TYPE_0127; + dprintk("ks0127: ks0127 found\n"); + break; + + case 9: + ks->ks_type = KS_TYPE_0127B; + dprintk("ks0127: ks0127B Revision A found\n"); + break; + + default: + dprintk("ks0127: unknown revision\n"); + break; + } +} + +static int ks0127_command(struct i2c_client *client, + unsigned int cmd, void *arg) +{ + struct ks0127 *ks = i2c_get_clientdata(client); + + int *iarg = (int*)arg; + + int status; + + if (!ks) + return -ENODEV; + + switch (cmd) { + + case DECODER_INIT: + dprintk("ks0127: command DECODER_INIT\n"); + ks0127_reset(ks); + break; + + case DECODER_SET_INPUT: + switch(*iarg) { + case KS_INPUT_COMPOSITE_1: + case KS_INPUT_COMPOSITE_2: + case KS_INPUT_COMPOSITE_3: + case KS_INPUT_COMPOSITE_4: + case KS_INPUT_COMPOSITE_5: + case KS_INPUT_COMPOSITE_6: + dprintk("ks0127: command DECODER_SET_INPUT %d: " + "Composite\n", *iarg); + /* autodetect 50/60 Hz */ + ks0127_and_or(ks, KS_CMDA, 0xfc, 0x00); + /* VSE=0 */ + ks0127_and_or(ks, KS_CMDA, ~0x40, 0x00); + /* set input line */ + ks0127_and_or(ks, KS_CMDB, 0xb0, *iarg); + /* non-freerunning mode */ + ks0127_and_or(ks, KS_CMDC, 0x70, 0x0a); + /* analog input */ + ks0127_and_or(ks, KS_CMDD, 0x03, 0x00); + /* enable chroma demodulation */ + ks0127_and_or(ks, KS_CTRACK, 0xcf, 0x00); + /* chroma trap, HYBWR=1 */ + ks0127_and_or(ks, KS_LUMA, 0x00, + (reg_defaults[KS_LUMA])|0x0c); + /* scaler fullbw, luma comb off */ + ks0127_and_or(ks, KS_VERTIA, 0x08, 0x81); + /* manual chroma comb .25 .5 .25 */ + ks0127_and_or(ks, KS_VERTIC, 0x0f, 0x90); + + /* chroma path delay */ + ks0127_and_or(ks, KS_CHROMB, 0x0f, 0x90); + + ks0127_write(ks, KS_UGAIN, reg_defaults[KS_UGAIN]); + ks0127_write(ks, KS_VGAIN, reg_defaults[KS_VGAIN]); + ks0127_write(ks, KS_UVOFFH, reg_defaults[KS_UVOFFH]); + ks0127_write(ks, KS_UVOFFL, reg_defaults[KS_UVOFFL]); + break; + + case KS_INPUT_SVIDEO_1: + case KS_INPUT_SVIDEO_2: + case KS_INPUT_SVIDEO_3: + dprintk("ks0127: command DECODER_SET_INPUT %d: " + "S-Video\n", *iarg); + /* autodetect 50/60 Hz */ + ks0127_and_or(ks, KS_CMDA, 0xfc, 0x00); + /* VSE=0 */ + ks0127_and_or(ks, KS_CMDA, ~0x40, 0x00); + /* set input line */ + ks0127_and_or(ks, KS_CMDB, 0xb0, *iarg); + /* non-freerunning mode */ + ks0127_and_or(ks, KS_CMDC, 0x70, 0x0a); + /* analog input */ + ks0127_and_or(ks, KS_CMDD, 0x03, 0x00); + /* enable chroma demodulation */ + ks0127_and_or(ks, KS_CTRACK, 0xcf, 0x00); + ks0127_and_or(ks, KS_LUMA, 0x00, + reg_defaults[KS_LUMA]); + /* disable luma comb */ + ks0127_and_or(ks, KS_VERTIA, 0x08, + (reg_defaults[KS_VERTIA]&0xf0)|0x01); + ks0127_and_or(ks, KS_VERTIC, 0x0f, + reg_defaults[KS_VERTIC]&0xf0); + + ks0127_and_or(ks, KS_CHROMB, 0x0f, + reg_defaults[KS_CHROMB]&0xf0); + + ks0127_write(ks, KS_UGAIN, reg_defaults[KS_UGAIN]); + ks0127_write(ks, KS_VGAIN, reg_defaults[KS_VGAIN]); + ks0127_write(ks, KS_UVOFFH, reg_defaults[KS_UVOFFH]); + ks0127_write(ks, KS_UVOFFL, reg_defaults[KS_UVOFFL]); + break; + + case KS_INPUT_YUV656: + dprintk("ks0127: command DECODER_SET_INPUT 15: " + "YUV656\n"); + if (ks->norm == VIDEO_MODE_NTSC || + ks->norm == KS_STD_PAL_M) + /* force 60 Hz */ + ks0127_and_or(ks, KS_CMDA, 0xfc, 0x03); + else + /* force 50 Hz */ + ks0127_and_or(ks, KS_CMDA, 0xfc, 0x02); + + ks0127_and_or(ks, KS_CMDA, 0xff, 0x40); /* VSE=1 */ + /* set input line and VALIGN */ + ks0127_and_or(ks, KS_CMDB, 0xb0, (*iarg | 0x40)); + /* freerunning mode, */ + /* TSTGEN = 1 TSTGFR=11 TSTGPH=0 TSTGPK=0 VMEM=1*/ + ks0127_and_or(ks, KS_CMDC, 0x70, 0x87); + /* digital input, SYNDIR = 0 INPSL=01 CLKDIR=0 EAV=0 */ + ks0127_and_or(ks, KS_CMDD, 0x03, 0x08); + /* disable chroma demodulation */ + ks0127_and_or(ks, KS_CTRACK, 0xcf, 0x30); + /* HYPK =01 CTRAP = 0 HYBWR=0 PED=1 RGBH=1 UNIT=1 */ + ks0127_and_or(ks, KS_LUMA, 0x00, 0x71); + ks0127_and_or(ks, KS_VERTIC, 0x0f, + reg_defaults[KS_VERTIC]&0xf0); + + /* scaler fullbw, luma comb off */ + ks0127_and_or(ks, KS_VERTIA, 0x08, 0x81); + + ks0127_and_or(ks, KS_CHROMB, 0x0f, + reg_defaults[KS_CHROMB]&0xf0); + + ks0127_and_or(ks, KS_CON, 0x00, 0x00); + ks0127_and_or(ks, KS_BRT, 0x00, 32); /* spec: 34 */ + /* spec: 229 (e5) */ + ks0127_and_or(ks, KS_SAT, 0x00, 0xe8); + ks0127_and_or(ks, KS_HUE, 0x00, 0); + + ks0127_and_or(ks, KS_UGAIN, 0x00, 238); + ks0127_and_or(ks, KS_VGAIN, 0x00, 0x00); + + /*UOFF:0x30, VOFF:0x30, TSTCGN=1 */ + ks0127_and_or(ks, KS_UVOFFH, 0x00, 0x4f); + ks0127_and_or(ks, KS_UVOFFL, 0x00, 0x00); + break; + + default: + dprintk("ks0127: command DECODER_SET_INPUT: " + "Unknown input %d\n", *iarg); + break; + } + + /* hack: CDMLPF sometimes spontaneously switches on; */ + /* force back off */ + ks0127_write(ks, KS_DEMOD, reg_defaults[KS_DEMOD]); + break; + + case DECODER_SET_OUTPUT: + switch(*iarg) { + case KS_OUTPUT_YUV656E: + dprintk("ks0127: command DECODER_SET_OUTPUT: " + "OUTPUT_YUV656E (Missing)\n"); + return -EINVAL; + break; + + case KS_OUTPUT_EXV: + dprintk("ks0127: command DECODER_SET_OUTPUT: " + "OUTPUT_EXV\n"); + ks0127_and_or(ks, KS_OFMTA, 0xf0, 0x09); + break; + } + break; + + case DECODER_SET_NORM: //sam This block mixes old and new norm names... + /* Set to automatic SECAM/Fsc mode */ + ks0127_and_or(ks, KS_DEMOD, 0xf0, 0x00); + + ks->norm = *iarg; + switch(*iarg) + { + /* this is untested !! */ + /* It just detects PAL_N/NTSC_M (no special frequencies) */ + /* And you have to set the standard a second time afterwards */ + case VIDEO_MODE_AUTO: + dprintk("ks0127: command DECODER_SET_NORM: AUTO\n"); + + /* The chip determines the format */ + /* based on the current field rate */ + ks0127_and_or(ks, KS_CMDA, 0xfc, 0x00); + ks0127_and_or(ks, KS_CHROMA, 0x9f, 0x20); + /* This is wrong for PAL ! As I said, */ + /* you need to set the standard once again !! */ + ks->format_height = 240; + ks->format_width = 704; + break; + + case VIDEO_MODE_NTSC: + dprintk("ks0127: command DECODER_SET_NORM: NTSC_M\n"); + ks0127_and_or(ks, KS_CHROMA, 0x9f, 0x20); + ks->format_height = 240; + ks->format_width = 704; + break; + + case KS_STD_NTSC_N: + dprintk("ks0127: command KS0127_SET_STANDARD: " + "NTSC_N (fixme)\n"); + ks0127_and_or(ks, KS_CHROMA, 0x9f, 0x40); + ks->format_height = 240; + ks->format_width = 704; + break; + + case VIDEO_MODE_PAL: + dprintk("ks0127: command DECODER_SET_NORM: PAL_N\n"); + ks0127_and_or(ks, KS_CHROMA, 0x9f, 0x20); + ks->format_height = 290; + ks->format_width = 704; + break; + + case KS_STD_PAL_M: + dprintk("ks0127: command KS0127_SET_STANDARD: " + "PAL_M (fixme)\n"); + ks0127_and_or(ks, KS_CHROMA, 0x9f, 0x40); + ks->format_height = 290; + ks->format_width = 704; + break; + + case VIDEO_MODE_SECAM: + dprintk("ks0127: command KS0127_SET_STANDARD: " + "SECAM\n"); + ks->format_height = 290; + ks->format_width = 704; + + /* set to secam autodetection */ + ks0127_and_or(ks, KS_CHROMA, 0xdf, 0x20); + ks0127_and_or(ks, KS_DEMOD, 0xf0, 0x00); + schedule_timeout_interruptible(HZ/10+1); + + /* did it autodetect? */ + if (ks0127_read(ks, KS_DEMOD) & 0x40) + break; + + /* force to secam mode */ + ks0127_and_or(ks, KS_DEMOD, 0xf0, 0x0f); + break; + + default: + dprintk("ks0127: command DECODER_SET_NORM: " + "Unknown norm %d\n", *iarg); + break; + } + break; + + case DECODER_SET_PICTURE: + dprintk("ks0127: command DECODER_SET_PICTURE " + "not yet supported (fixme)\n"); + return -EINVAL; + + //sam todo: KS0127_SET_BRIGHTNESS: Merge into DECODER_SET_PICTURE + //sam todo: KS0127_SET_CONTRAST: Merge into DECODER_SET_PICTURE + //sam todo: KS0127_SET_HUE: Merge into DECODER_SET_PICTURE? + //sam todo: KS0127_SET_SATURATION: Merge into DECODER_SET_PICTURE + //sam todo: KS0127_SET_AGC_MODE: + //sam todo: KS0127_SET_AGC: + //sam todo: KS0127_SET_CHROMA_MODE: + //sam todo: KS0127_SET_PIXCLK_MODE: + //sam todo: KS0127_SET_GAMMA_MODE: + //sam todo: KS0127_SET_UGAIN: + //sam todo: KS0127_SET_VGAIN: + //sam todo: KS0127_SET_INVALY: + //sam todo: KS0127_SET_INVALU: + //sam todo: KS0127_SET_INVALV: + //sam todo: KS0127_SET_UNUSEY: + //sam todo: KS0127_SET_UNUSEU: + //sam todo: KS0127_SET_UNUSEV: + //sam todo: KS0127_SET_VSALIGN_MODE: + + case DECODER_ENABLE_OUTPUT: + { + + int *iarg = arg; + int enable = (*iarg != 0); + if (enable) { + dprintk("ks0127: command " + "DECODER_ENABLE_OUTPUT on " + "(%d)\n", enable); + /* All output pins on */ + ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x30); + /* Obey the OEN pin */ + ks0127_and_or(ks, KS_CDEM, 0x7f, 0x00); + } else { + dprintk("ks0127: command " + "DECODER_ENABLE_OUTPUT off " + "(%d)\n", enable); + /* Video output pins off */ + ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x00); + /* Ignore the OEN pin */ + ks0127_and_or(ks, KS_CDEM, 0x7f, 0x80); + } + } + break; + + //sam todo: KS0127_SET_OUTPUT_MODE: + //sam todo: KS0127_SET_WIDTH: + //sam todo: KS0127_SET_HEIGHT: + //sam todo: KS0127_SET_HSCALE: + + case DECODER_GET_STATUS: + dprintk("ks0127: command DECODER_GET_STATUS\n"); + *iarg = 0; + status = ks0127_read(ks, KS_STAT); + if (!(status & 0x20)) /* NOVID not set */ + *iarg = (*iarg & DECODER_STATUS_GOOD); + if ((status & 0x01)) /* CLOCK set */ + *iarg = (*iarg & DECODER_STATUS_COLOR); + if ((status & 0x08)) /* PALDET set */ + *iarg = (*iarg & DECODER_STATUS_PAL); + else + *iarg = (*iarg & DECODER_STATUS_NTSC); + break; + + //Catch any unknown command + default: + dprintk("ks0127: command unknown: %04X\n", cmd); + return -EINVAL; + } + return 0; +} + + + + +static int ks0127_probe(struct i2c_adapter *adapter); +static int ks0127_detach(struct i2c_client *client); +static int ks0127_command(struct i2c_client *client, + unsigned int cmd, void *arg); + + + +/* Addresses to scan */ +static unsigned short normal_i2c[] = {I2C_KS0127_ADDON>>1, + I2C_KS0127_ONBOARD>>1, I2C_CLIENT_END}; +static unsigned short probe[2] = {I2C_CLIENT_END, I2C_CLIENT_END}; +static unsigned short ignore[2] = {I2C_CLIENT_END, I2C_CLIENT_END}; +static struct i2c_client_address_data addr_data = { + normal_i2c, + probe, + ignore, +}; + +static struct i2c_driver i2c_driver_ks0127 = { + .driver.name = "ks0127", + .id = I2C_DRIVERID_KS0127, + .attach_adapter = ks0127_probe, + .detach_client = ks0127_detach, + .command = ks0127_command +}; + +static struct i2c_client ks0127_client_tmpl = +{ + .name = "(ks0127 unset)", + .addr = 0, + .adapter = NULL, + .driver = &i2c_driver_ks0127, + .usage_count = 0 +}; + +static int ks0127_found_proc(struct i2c_adapter *adapter, int addr, int kind) +{ + struct ks0127 *ks; + struct i2c_client *client; + + client = kzalloc(sizeof(*client), GFP_KERNEL); + if (client == NULL) + return -ENOMEM; + memcpy(client, &ks0127_client_tmpl, sizeof(*client)); + + ks = kzalloc(sizeof(*ks), GFP_KERNEL); + if (ks == NULL) { + kfree(client); + return -ENOMEM; + } + + i2c_set_clientdata(client, ks); + client->adapter = adapter; + client->addr = addr; + sprintf(client->name, "ks0127-%02x", adapter->id); + + ks->client = client; + ks->addr = addr; + ks->ks_type = KS_TYPE_UNKNOWN; + + /* power up */ + ks0127_write(ks, KS_CMDA, 0x2c); + mdelay(10); + + /* reset the device */ + ks0127_reset(ks); + printk(KERN_INFO "ks0127: attach: %s video decoder\n", + ks->addr==(I2C_KS0127_ADDON>>1) ? "addon" : "on-board"); + + i2c_attach_client(client); + return 0; +} + + +static int ks0127_probe(struct i2c_adapter *adapter) +{ + if (adapter->id == I2C_HW_B_ZR36067) + return i2c_probe(adapter, &addr_data, ks0127_found_proc); + return 0; +} + +static int ks0127_detach(struct i2c_client *client) +{ + struct ks0127 *ks = i2c_get_clientdata(client); + + ks0127_write(ks, KS_OFMTA, 0x20); /*tristate*/ + ks0127_write(ks, KS_CMDA, 0x2c | 0x80); /* power down */ + + i2c_detach_client(client); + kfree(ks); + kfree(client); + + dprintk("ks0127: detach\n"); + return 0; +} + + +static int __devinit ks0127_init_module(void) +{ + init_reg_defaults(); + i2c_add_driver(&i2c_driver_ks0127); + return 0; +} + +static void __devexit ks0127_cleanup_module(void) +{ + i2c_del_driver(&i2c_driver_ks0127); +} + + +module_init(ks0127_init_module); +module_exit(ks0127_cleanup_module); diff --git a/drivers/media/video/ks0127.h b/drivers/media/video/ks0127.h new file mode 100644 index 00000000000..1ec578833ae --- /dev/null +++ b/drivers/media/video/ks0127.h @@ -0,0 +1,53 @@ +/* + * Video Capture Driver ( Video for Linux 1/2 ) + * for the Matrox Marvel G200,G400 and Rainbow Runner-G series + * + * This module is an interface to the KS0127 video decoder chip. + * + * Copyright (C) 1999 Ryan Drake <stiletto@mediaone.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef KS0127_H +#define KS0127_H + +#include <linux/videodev.h> + +/* input channels */ +#define KS_INPUT_COMPOSITE_1 0 +#define KS_INPUT_COMPOSITE_2 1 +#define KS_INPUT_COMPOSITE_3 2 +#define KS_INPUT_COMPOSITE_4 4 +#define KS_INPUT_COMPOSITE_5 5 +#define KS_INPUT_COMPOSITE_6 6 + +#define KS_INPUT_SVIDEO_1 8 +#define KS_INPUT_SVIDEO_2 9 +#define KS_INPUT_SVIDEO_3 10 + +#define KS_INPUT_YUV656 15 +#define KS_INPUT_COUNT 10 + +/* output channels */ +#define KS_OUTPUT_YUV656E 0 +#define KS_OUTPUT_EXV 1 + +/* video standards */ +#define KS_STD_NTSC_N 112 /* 50 Hz NTSC */ +#define KS_STD_PAL_M 113 /* 60 Hz PAL */ + +#endif /* KS0127_H */ + diff --git a/drivers/media/video/zoran.h b/drivers/media/video/zoran.h index 0166f555a5c..ffcda95ed9d 100644 --- a/drivers/media/video/zoran.h +++ b/drivers/media/video/zoran.h @@ -159,7 +159,7 @@ Private IOCTL to set up for displaying MJPEG #define BUZ_MAX_FRAME 256 /* Must be a power of 2 */ #define BUZ_MASK_FRAME 255 /* Must be BUZ_MAX_FRAME-1 */ -#define BUZ_MAX_INPUT 8 +#define BUZ_MAX_INPUT 16 #if VIDEO_MAX_FRAME <= 32 # define V4L_MAX_FRAME 32 @@ -191,6 +191,9 @@ enum card_type { /* Iomega */ BUZ, + /* AverMedia */ + AVS6EYES, + /* total number of cards */ NUM_CARDS }; @@ -379,6 +382,9 @@ struct card_info { /* is the /GWS line conected? */ u8 gws_not_connected; + /* avs6eyes mux setting */ + u8 input_mux; + void (*init) (struct zoran * zr); }; diff --git a/drivers/media/video/zoran_card.c b/drivers/media/video/zoran_card.c index 0a85c9e7fb4..798138599be 100644 --- a/drivers/media/video/zoran_card.c +++ b/drivers/media/video/zoran_card.c @@ -27,6 +27,8 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/delay.h> + #include <linux/config.h> #include <linux/types.h> #include <linux/kernel.h> @@ -93,6 +95,11 @@ module_param(default_input, int, 0); MODULE_PARM_DESC(default_input, "Default input (0=Composite, 1=S-Video, 2=Internal)"); +static int default_mux = 1; /* 6 Eyes input selection */ +module_param(default_mux, int, 0); +MODULE_PARM_DESC(default_mux, + "Default 6 Eyes mux setting (Input selection)"); + static int default_norm = 0; /* 0=PAL, 1=NTSC 2=SECAM */ module_param(default_norm, int, 0); MODULE_PARM_DESC(default_norm, "Default norm (0=PAL, 1=NTSC, 2=SECAM)"); @@ -301,6 +308,30 @@ lml33_init (struct zoran *zr) GPIO(zr, 2, 1); // Set Composite input/output } +static void +avs6eyes_init (struct zoran *zr) +{ + // AverMedia 6-Eyes original driver by Christer Weinigel + + // Lifted straight from Christer's old driver and + // modified slightly by Martin Samuelsson. + + int mux = default_mux; /* 1 = BT866, 7 = VID1 */ + + GPIO(zr, 4, 1); /* Bt866 SLEEP on */ + udelay(2); + + GPIO(zr, 0, 1); /* ZR36060 /RESET on */ + GPIO(zr, 1, 0); /* ZR36060 /SLEEP on */ + GPIO(zr, 2, mux & 1); /* MUX S0 */ + GPIO(zr, 3, 0); /* /FRAME on */ + GPIO(zr, 4, 0); /* Bt866 SLEEP off */ + GPIO(zr, 5, mux & 2); /* MUX S1 */ + GPIO(zr, 6, 0); /* ? */ + GPIO(zr, 7, mux & 4); /* MUX S2 */ + +} + static char * i2cid_to_modulename (u16 i2c_id) { @@ -391,6 +422,14 @@ static struct tvnorm f60sqpixel_dc10 = { 780, 640, 0, 716, 525, 480, 12 }; static struct tvnorm f50ccir601_lm33r10 = { 864, 720, 74+54, 804, 625, 576, 18 }; static struct tvnorm f60ccir601_lm33r10 = { 858, 720, 56+54, 788, 525, 480, 16 }; +/* FIXME: The ks0127 seem incapable of swapping U and V, too, which is why I + * copy Maxim's left shift hack for the 6 Eyes. + * + * Christer's driver used the unshifted norms, though... + * /Sam */ +static struct tvnorm f50ccir601_avs6eyes = { 864, 720, 74, 804, 625, 576, 18 }; +static struct tvnorm f60ccir601_avs6eyes = { 858, 720, 56, 788, 525, 480, 16 }; + static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { { .type = DC10_old, @@ -419,6 +458,7 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { .gpcs = { -1, 0 }, .vfe_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, .gws_not_connected = 0, + .input_mux = 0, .init = &dc10_init, }, { .type = DC10_new, @@ -445,6 +485,7 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { .gpcs = { -1, 1}, .vfe_pol = { 1, 1, 1, 1, 0, 0, 0, 0 }, .gws_not_connected = 0, + .input_mux = 0, .init = &dc10plus_init, }, { .type = DC10plus, @@ -474,6 +515,7 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { .gpcs = { -1, 1 }, .vfe_pol = { 1, 1, 1, 1, 0, 0, 0, 0 }, .gws_not_connected = 0, + .input_mux = 0, .init = &dc10plus_init, }, { .type = DC30, @@ -502,6 +544,7 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { .gpcs = { -1, 0 }, .vfe_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, .gws_not_connected = 0, + .input_mux = 0, .init = &dc10_init, }, { .type = DC30plus, @@ -532,6 +575,7 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { .gpcs = { -1, 0 }, .vfe_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, .gws_not_connected = 0, + .input_mux = 0, .init = &dc10_init, }, { .type = LML33, @@ -558,6 +602,7 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { .gpcs = { 3, 1 }, .vfe_pol = { 1, 1, 0, 0, 0, 1, 0, 0 }, .gws_not_connected = 1, + .input_mux = 0, .init = &lml33_init, }, { .type = LML33R10, @@ -586,6 +631,7 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { .gpcs = { 3, 1 }, .vfe_pol = { 1, 1, 0, 0, 0, 1, 0, 0 }, .gws_not_connected = 1, + .input_mux = 0, .init = &lml33_init, }, { .type = BUZ, @@ -614,8 +660,49 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { .gpcs = { 3, 1 }, .vfe_pol = { 1, 1, 0, 0, 0, 1, 0, 0 }, .gws_not_connected = 1, + .input_mux = 0, .init = &buz_init, + }, { + .type = AVS6EYES, + .name = "6-Eyes", + /* AverMedia chose not to brand the 6-Eyes. Thus it + can't be autodetected, and requires card=x. */ + .vendor_id = -1, + .device_id = -1, + .i2c_decoder = I2C_DRIVERID_KS0127, + .i2c_encoder = I2C_DRIVERID_BT866, + .video_codec = CODEC_TYPE_ZR36060, + + .inputs = 10, + .input = { + { 0, "Composite 1" }, + { 1, "Composite 2" }, + { 2, "Composite 3" }, + { 4, "Composite 4" }, + { 5, "Composite 5" }, + { 6, "Composite 6" }, + { 8, "S-Video 1" }, + { 9, "S-Video 2" }, + {10, "S-Video 3" }, + {15, "YCbCr" } + }, + .norms = 2, + .tvn = { + &f50ccir601_avs6eyes, + &f60ccir601_avs6eyes, + NULL + }, + .jpeg_int = ZR36057_ISR_GIRQ1, + .vsync_int = ZR36057_ISR_GIRQ0, + .gpio = { 1, 0, 3, -1, -1, -1, -1, -1 },// Validity unknown /Sam + .gpio_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, // Validity unknown /Sam + .gpcs = { 3, 1 }, // Validity unknown /Sam + .vfe_pol = { 1, 0, 0, 0, 0, 1, 0, 0 }, // Validity unknown /Sam + .gws_not_connected = 1, + .input_mux = 1, + .init = &avs6eyes_init, } + }; /* |