diff options
Diffstat (limited to 'drivers/message/fusion/mptbase.c')
| -rw-r--r-- | drivers/message/fusion/mptbase.c | 875 |
1 files changed, 720 insertions, 155 deletions
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index b3f28a03b6a..083acfd91d8 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -6,7 +6,7 @@ * running LSI Logic Fusion MPT (Message Passing Technology) firmware. * * Copyright (c) 1999-2007 LSI Logic Corporation - * (mailto:mpt_linux_developer@lsil.com) + * (mailto:mpt_linux_developer@lsi.com) * */ /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ @@ -82,6 +82,10 @@ static int mpt_msi_enable; module_param(mpt_msi_enable, int, 0); MODULE_PARM_DESC(mpt_msi_enable, " MSI Support Enable (default=0)"); +static int mpt_channel_mapping; +module_param(mpt_channel_mapping, int, 0); +MODULE_PARM_DESC(mpt_channel_mapping, " Mapping id's to channels (default=0)"); + #ifdef MFCNT static int mfcounter = 0; #define PRINT_MF_COUNT 20000 @@ -173,11 +177,14 @@ static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc); //int mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag); static int ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *evReply, int *evHandlers); -static void mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf); +#ifdef MPT_DEBUG_REPLY +static void mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf); +#endif static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info); static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info); static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info); static int mpt_read_ioc_pg_3(MPT_ADAPTER *ioc); +static void mpt_inactive_raid_list_free(MPT_ADAPTER *ioc); /* module entry point */ static int __init fusion_init (void); @@ -319,13 +326,11 @@ mpt_reply(MPT_ADAPTER *ioc, u32 pa) else if (ioc->bus_type == SAS) mpt_sas_log_info(ioc, log_info); } - if (ioc_stat & MPI_IOCSTATUS_MASK) { - if (ioc->bus_type == SPI && - cb_idx != mpt_stm_index && - cb_idx != mpt_lan_index) - mpt_sp_ioc_info(ioc, (u32)ioc_stat, mf); - } +#ifdef MPT_DEBUG_REPLY + if (ioc_stat & MPI_IOCSTATUS_MASK) + mpt_iocstatus_info(ioc, (u32)ioc_stat, mf); +#endif /* Check for (valid) IO callback! */ if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS || @@ -911,7 +916,7 @@ mpt_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr) int mpt_send_handshake_request(int handle, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag) { - int r = 0; + int r = 0; u8 *req_as_bytes; int ii; @@ -1811,6 +1816,13 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) * and we try GetLanConfigPages again... */ if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) { + + /* + * Initalize link list for inactive raid volumes. + */ + init_MUTEX(&ioc->raid_data.inactive_list_mutex); + INIT_LIST_HEAD(&ioc->raid_data.inactive_list); + if (ioc->bus_type == SAS) { /* clear persistency table */ @@ -2017,6 +2029,8 @@ mpt_adapter_disable(MPT_ADAPTER *ioc) } kfree(ioc->spi_data.nvram); + mpt_inactive_raid_list_free(ioc); + kfree(ioc->raid_data.pIocPg2); kfree(ioc->raid_data.pIocPg3); ioc->spi_data.nvram = NULL; ioc->raid_data.pIocPg3 = NULL; @@ -2413,6 +2427,9 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason) facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word); facts->ProductID = le16_to_cpu(facts->ProductID); + if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK) + > MPI_FW_HEADER_PID_PROD_TARGET_SCSI) + ioc->ir_firmware = 1; facts->CurrentHostMfaHighAddr = le32_to_cpu(facts->CurrentHostMfaHighAddr); facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits); @@ -2505,6 +2522,7 @@ GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag) int ii; int req_sz; int reply_sz; + int max_id; /* IOC *must* NOT be in RESET state! */ if (ioc->last_state == MPI_IOC_STATE_RESET) { @@ -2552,6 +2570,21 @@ GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag) pfacts->MaxPersistentIDs = le16_to_cpu(pfacts->MaxPersistentIDs); pfacts->MaxLanBuckets = le16_to_cpu(pfacts->MaxLanBuckets); + max_id = (ioc->bus_type == SAS) ? pfacts->PortSCSIID : + pfacts->MaxDevices; + ioc->devices_per_bus = (max_id > 255) ? 256 : max_id; + ioc->number_of_buses = (ioc->devices_per_bus < 256) ? 1 : max_id/256; + + /* + * Place all the devices on channels + * + * (for debuging) + */ + if (mpt_channel_mapping) { + ioc->devices_per_bus = 1; + ioc->number_of_buses = (max_id > 255) ? 255 : max_id; + } + return 0; } @@ -2592,13 +2625,8 @@ SendIocInit(MPT_ADAPTER *ioc, int sleepFlag) ddlprintk((MYIOC_s_INFO_FMT "upload_fw %d facts.Flags=%x\n", ioc->name, ioc->upload_fw, ioc->facts.Flags)); - if(ioc->bus_type == SAS) - ioc_init.MaxDevices = ioc->facts.MaxDevices; - else if(ioc->bus_type == FC) - ioc_init.MaxDevices = MPT_MAX_FC_DEVICES; - else - ioc_init.MaxDevices = MPT_MAX_SCSI_DEVICES; - ioc_init.MaxBuses = MPT_MAX_BUS; + ioc_init.MaxDevices = (U8)ioc->devices_per_bus; + ioc_init.MaxBuses = (U8)ioc->number_of_buses; dinitprintk((MYIOC_s_INFO_FMT "facts.MsgVersion=%x\n", ioc->name, ioc->facts.MsgVersion)); if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) { @@ -2720,9 +2748,7 @@ SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag) /* RAID FW may take a long time to enable */ - if (((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK) - > MPI_FW_HEADER_PID_PROD_TARGET_SCSI) || - (ioc->bus_type == SAS)) { + if (ioc->ir_firmware || ioc->bus_type == SAS) { rc = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&port_enable, reply_sz, (u16*)&reply_buf, 300 /*seconds*/, sleepFlag); @@ -3193,6 +3219,9 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag) u32 diag1val = 0; #endif + /* Clear any existing interrupts */ + CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); + if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) { drsprintk((MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset " "address=%p\n", ioc->name, __FUNCTION__, @@ -3212,7 +3241,7 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag) " count=%d\n", ioc->name, doorbell, count)); if (doorbell == MPI_IOC_STATE_READY) { - return 0; + return 1; } /* wait 1 sec */ @@ -3224,9 +3253,6 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag) return -1; } - /* Clear any existing interrupts */ - CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); - /* Use "Diagnostic reset" method! (only thing available!) */ diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); @@ -3942,7 +3968,7 @@ WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag) } } else { while (--cntdn) { - mdelay (1); + udelay (1000); intstat = CHIPREG_READ32(&ioc->chip->IntStatus); if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS)) break; @@ -3994,7 +4020,7 @@ WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag) intstat = CHIPREG_READ32(&ioc->chip->IntStatus); if (intstat & MPI_HIS_DOORBELL_INTERRUPT) break; - mdelay(1); + udelay (1000); count++; } } @@ -4310,8 +4336,8 @@ mptbase_raid_process_event_data(MPT_ADAPTER *ioc, if ((reason >= MPI_EVENT_RAID_RC_PHYSDISK_CREATED && reason <= MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED) || (reason == MPI_EVENT_RAID_RC_SMART_DATA)) { - printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d\n", - ioc->name, disk); + printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d id=%d\n", + ioc->name, disk, volume); } else { printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n", ioc->name, volume); @@ -4712,7 +4738,187 @@ mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum) return 0; } -/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mpt_inactive_raid_list_free + * + * This clears this link list. + * + * @ioc - pointer to per adapter structure + * + **/ +static void +mpt_inactive_raid_list_free(MPT_ADAPTER *ioc) +{ + struct inactive_raid_component_info *component_info, *pNext; + + if (list_empty(&ioc->raid_data.inactive_list)) + return; + + down(&ioc->raid_data.inactive_list_mutex); + list_for_each_entry_safe(component_info, pNext, + &ioc->raid_data.inactive_list, list) { + list_del(&component_info->list); + kfree(component_info); + } + up(&ioc->raid_data.inactive_list_mutex); +} + +/** + * mpt_inactive_raid_volumes + * + * This sets up link list of phy_disk_nums for devices belonging in an inactive volume + * + * @ioc - pointer to per adapter structure + * @channel - volume channel + * @id - volume target id + * + * + **/ +static void +mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id) +{ + CONFIGPARMS cfg; + ConfigPageHeader_t hdr; + dma_addr_t dma_handle; + pRaidVolumePage0_t buffer = NULL; + int i; + RaidPhysDiskPage0_t phys_disk; + struct inactive_raid_component_info *component_info; + int handle_inactive_volumes; + + memset(&cfg, 0 , sizeof(CONFIGPARMS)); + memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); + hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME; + cfg.pageAddr = (channel << 8) + id; + cfg.cfghdr.hdr = &hdr; + cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; + + if (mpt_config(ioc, &cfg) != 0) + goto out; + + if (!hdr.PageLength) + goto out; + + buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, + &dma_handle); + + if (!buffer) + goto out; + + cfg.physAddr = dma_handle; + cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; + + if (mpt_config(ioc, &cfg) != 0) + goto out; + + if (!buffer->NumPhysDisks) + goto out; + + handle_inactive_volumes = + (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE || + (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED) == 0 || + buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_FAILED || + buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_MISSING) ? 1 : 0; + + if (!handle_inactive_volumes) + goto out; + + down(&ioc->raid_data.inactive_list_mutex); + for (i = 0; i < buffer->NumPhysDisks; i++) { + if(mpt_raid_phys_disk_pg0(ioc, + buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0) + continue; + + if ((component_info = kmalloc(sizeof (*component_info), + GFP_KERNEL)) == NULL) + continue; + + component_info->volumeID = id; + component_info->volumeBus = channel; + component_info->d.PhysDiskNum = phys_disk.PhysDiskNum; + component_info->d.PhysDiskBus = phys_disk.PhysDiskBus; + component_info->d.PhysDiskID = phys_disk.PhysDiskID; + component_info->d.PhysDiskIOC = phys_disk.PhysDiskIOC; + + list_add_tail(&component_info->list, + &ioc->raid_data.inactive_list); + } + up(&ioc->raid_data.inactive_list_mutex); + + out: + if (buffer) + pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer, + dma_handle); +} + +/** + * mpt_raid_phys_disk_pg0 - returns phys disk page zero + * @ioc: Pointer to a Adapter Structure + * @phys_disk_num: io unit unique phys disk num generated by the ioc + * @phys_disk: requested payload data returned + * + * Return: + * 0 on success + * -EFAULT if read of config page header fails or data pointer not NULL + * -ENOMEM if pci_alloc failed + **/ +int +mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, pRaidPhysDiskPage0_t phys_disk) +{ + CONFIGPARMS cfg; + ConfigPageHeader_t hdr; + dma_addr_t dma_handle; + pRaidPhysDiskPage0_t buffer = NULL; + int rc; + + memset(&cfg, 0 , sizeof(CONFIGPARMS)); + memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); + + hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK; + cfg.cfghdr.hdr = &hdr; + cfg.physAddr = -1; + cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; + + if (mpt_config(ioc, &cfg) != 0) { + rc = -EFAULT; + goto out; + } + + if (!hdr.PageLength) { + rc = -EFAULT; + goto out; + } + + buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, + &dma_handle); + + if (!buffer) { + rc = -ENOMEM; + goto out; + } + + cfg.physAddr = dma_handle; + cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; + cfg.pageAddr = phys_disk_num; + + if (mpt_config(ioc, &cfg) != 0) { + rc = -EFAULT; + goto out; + } + + rc = 0; + memcpy(phys_disk, buffer, sizeof(*buffer)); + phys_disk->MaxLBA = le32_to_cpu(buffer->MaxLBA); + + out: + + if (buffer) + pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer, + dma_handle); + + return rc; +} + /** * mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes * @ioc: Pointer to a Adapter Strucutre @@ -4722,21 +4928,27 @@ mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum) * 0 on success * -EFAULT if read of config page header fails or data pointer not NULL * -ENOMEM if pci_alloc failed - */ + **/ int mpt_findImVolumes(MPT_ADAPTER *ioc) { IOCPage2_t *pIoc2; u8 *mem; - ConfigPageIoc2RaidVol_t *pIocRv; dma_addr_t ioc2_dma; CONFIGPARMS cfg; ConfigPageHeader_t header; - int jj; int rc = 0; int iocpage2sz; - u8 nVols, nPhys; - u8 vid, vbus, vioc; + int i; + + if (!ioc->ir_firmware) + return 0; + + /* Free the old page + */ + kfree(ioc->raid_data.pIocPg2); + ioc->raid_data.pIocPg2 = NULL; + mpt_inactive_raid_list_free(ioc); /* Read IOCP2 header then the page. */ @@ -4764,55 +4976,23 @@ mpt_findImVolumes(MPT_ADAPTER *ioc) cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; cfg.physAddr = ioc2_dma; if (mpt_config(ioc, &cfg) != 0) - goto done_and_free; + goto out; + + mem = kmalloc(iocpage2sz, GFP_KERNEL); + if (!mem) + goto out; - if ( (mem = (u8 *)ioc->raid_data.pIocPg2) == NULL ) { - mem = kmalloc(iocpage2sz, GFP_ATOMIC); - if (mem) { - ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem; - } else { - goto done_and_free; - } - } memcpy(mem, (u8 *)pIoc2, iocpage2sz); + ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem; - /* Identify RAID Volume Id's */ - nVols = pIoc2->NumActiveVolumes; - if ( nVols == 0) { - /* No RAID Volume. - */ - goto done_and_free; - } else { - /* At least 1 RAID Volume - */ - pIocRv = pIoc2->RaidVolume; - ioc->raid_data.isRaid = 0; - for (jj = 0; jj < nVols; jj++, pIocRv++) { - vid = pIocRv->VolumeID; - vbus = pIocRv->VolumeBus; - vioc = pIocRv->VolumeIOC; - - /* find the match - */ - if (vbus == 0) { - ioc->raid_data.isRaid |= (1 << vid); - } else { - /* Error! Always bus 0 - */ - } - } - } + mpt_read_ioc_pg_3(ioc); - /* Identify Hidden Physical Disk Id's */ - nPhys = pIoc2->NumActivePhysDisks; - if (nPhys == 0) { - /* No physical disks. - */ - } else { - mpt_read_ioc_pg_3(ioc); - } + for (i = 0; i < pIoc2->NumActiveVolumes ; i++) + mpt_inactive_raid_volumes(ioc, + pIoc2->RaidVolume[i].VolumeBus, + pIoc2->RaidVolume[i].VolumeID); -done_and_free: + out: pci_free_consistent(ioc->pcidev, iocpage2sz, pIoc2, ioc2_dma); return rc; @@ -4865,7 +5045,7 @@ mpt_read_ioc_pg_3(MPT_ADAPTER *ioc) cfg.physAddr = ioc3_dma; cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; if (mpt_config(ioc, &cfg) == 0) { - mem = kmalloc(iocpage3sz, GFP_ATOMIC); + mem = kmalloc(iocpage3sz, GFP_KERNEL); if (mem) { memcpy(mem, (u8 *)pIoc3, iocpage3sz); ioc->raid_data.pIocPg3 = (IOCPage3_t *) mem; @@ -5679,8 +5859,6 @@ mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag) return rc; } -# define EVENT_DESCR_STR_SZ 100 - /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ static void EventDescriptionStr(u8 event, u32 evData0, char *evStr) @@ -5708,9 +5886,6 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr) break; case MPI_EVENT_RESCAN: ds = "Bus Rescan Event"; - /* Ok, do we need to do anything here? As far as - I can tell, this is when a new device gets added - to the loop. */ break; case MPI_EVENT_LINK_STATUS_CHANGE: if (evData0 == MPI_EVENT_LINK_STATUS_FAILURE) @@ -5787,48 +5962,63 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr) case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE: { u8 id = (u8)(evData0); + u8 channel = (u8)(evData0 >> 8); u8 ReasonCode = (u8)(evData0 >> 16); switch (ReasonCode) { case MPI_EVENT_SAS_DEV_STAT_RC_ADDED: snprintf(evStr, EVENT_DESCR_STR_SZ, - "SAS Device Status Change: Added: id=%d", id); + "SAS Device Status Change: Added: " + "id=%d channel=%d", id, channel); break; case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING: snprintf(evStr, EVENT_DESCR_STR_SZ, - "SAS Device Status Change: Deleted: id=%d", id); + "SAS Device Status Change: Deleted: " + "id=%d channel=%d", id, channel); break; case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA: snprintf(evStr, EVENT_DESCR_STR_SZ, - "SAS Device Status Change: SMART Data: id=%d", - id); + "SAS Device Status Change: SMART Data: " + "id=%d channel=%d", id, channel); break; case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED: snprintf(evStr, EVENT_DESCR_STR_SZ, - "SAS Device Status Change: No Persistancy: id=%d", id); + "SAS Device Status Change: No Persistancy: " + "id=%d channel=%d", id, channel); + break; + case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED: + snprintf(evStr, EVENT_DESCR_STR_SZ, + "SAS Device Status Change: Unsupported Device " + "Discovered : id=%d channel=%d", id, channel); break; case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET: snprintf(evStr, EVENT_DESCR_STR_SZ, - "SAS Device Status Change: Internal Device Reset : id=%d", id); + "SAS Device Status Change: Internal Device " + "Reset : id=%d channel=%d", id, channel); break; case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL: snprintf(evStr, EVENT_DESCR_STR_SZ, - "SAS Device Status Change: Internal Task Abort : id=%d", id); + "SAS Device Status Change: Internal Task " + "Abort : id=%d channel=%d", id, channel); break; case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL: snprintf(evStr, EVENT_DESCR_STR_SZ, - "SAS Device Status Change: Internal Abort Task Set : id=%d", id); + "SAS Device Status Change: Internal Abort " + "Task Set : id=%d channel=%d", id, channel); break; case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL: snprintf(evStr, EVENT_DESCR_STR_SZ, - "SAS Device Status Change: Internal Clear Task Set : id=%d", id); + "SAS Device Status Change: Internal Clear " + "Task Set : id=%d channel=%d", id, channel); break; case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL: snprintf(evStr, EVENT_DESCR_STR_SZ, - "SAS Device Status Change: Internal Query Task : id=%d", id); + "SAS Device Status Change: Internal Query " + "Task : id=%d channel=%d", id, channel); break; default: snprintf(evStr, EVENT_DESCR_STR_SZ, - "SAS Device Status Change: Unknown: id=%d", id); + "SAS Device Status Change: Unknown: " + "id=%d channel=%d", id, channel); break; } break; @@ -5837,8 +6027,16 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr) ds = "Bus Timer Expired"; break; case MPI_EVENT_QUEUE_FULL: - ds = "Queue Full"; + { + u16 curr_depth = (u16)(evData0 >> 16); + u8 channel = (u8)(evData0 >> 8); + u8 id = (u8)(evData0); + + snprintf(evStr, EVENT_DESCR_STR_SZ, + "Queue Full: channel=%d id=%d depth=%d", + channel, id, curr_depth); break; + } case MPI_EVENT_SAS_SES: ds = "SAS SES Event"; break; @@ -5942,6 +6140,76 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr) ds = "SAS Log Entry Added"; break; + case MPI_EVENT_SAS_BROADCAST_PRIMITIVE: + { + u8 phy_num = (u8)(evData0); + u8 port_num = (u8)(evData0 >> 8); + u8 port_width = (u8)(evData0 >> 16); + u8 primative = (u8)(evData0 >> 24); + snprintf(evStr, EVENT_DESCR_STR_SZ, + "SAS Broadcase Primative: phy=%d port=%d " + "width=%d primative=0x%02x", + phy_num, port_num, port_width, primative); + break; + } + + case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE: + { + u8 reason = (u8)(evData0); + u8 port_num = (u8)(evData0 >> 8); + u16 handle = le16_to_cpu(evData0 >> 16); + + snprintf(evStr, EVENT_DESCR_STR_SZ, + "SAS Initiator Device Status Change: reason=0x%02x " + "port=%d handle=0x%04x", + reason, port_num, handle); + break; + } + + case MPI_EVENT_SAS_INIT_TABLE_OVERFLOW: + { + u8 max_init = (u8)(evData0); + u8 current_init = (u8)(evData0 >> 8); + + snprintf(evStr, EVENT_DESCR_STR_SZ, + "SAS Initiator Device Table Overflow: max initiators=%02d " + "current initators=%02d", + max_init, current_init); + break; + } + case MPI_EVENT_SAS_SMP_ERROR: + { + u8 status = (u8)(evData0); + u8 port_num = (u8)(evData0 >> 8); + u8 result = (u8)(evData0 >> 16); + + if (status == MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID) + snprintf(evStr, EVENT_DESCR_STR_SZ, + "SAS SMP Error: port=%d result=0x%02x", + port_num, result); + else if (status == MPI_EVENT_SAS_SMP_CRC_ERROR) + snprintf(evStr, EVENT_DESCR_STR_SZ, + "SAS SMP Error: port=%d : CRC Error", + port_num); + else if (status == MPI_EVENT_SAS_SMP_TIMEOUT) + snprintf(evStr, EVENT_DESCR_STR_SZ, + "SAS SMP Error: port=%d : Timeout", + port_num); + else if (status == MPI_EVENT_SAS_SMP_NO_DESTINATION) + snprintf(evStr, EVENT_DESCR_STR_SZ, + "SAS SMP Error: port=%d : No Destination", + port_num); + else if (status == MPI_EVENT_SAS_SMP_BAD_DESTINATION) + snprintf(evStr, EVENT_DESCR_STR_SZ, + "SAS SMP Error: port=%d : Bad Destination", + port_num); + else + snprintf(evStr, EVENT_DESCR_STR_SZ, + "SAS SMP Error: port=%d : status=0x%02x", + port_num, status); + break; + } + /* * MPT base "custom" events may be added here... */ @@ -6205,10 +6473,11 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info) "Abort", /* 12h */ "IO Not Yet Executed", /* 13h */ "IO Executed", /* 14h */ - "Persistent Reservation Out Not Affiliation Owner", /* 15h */ + "Persistent Reservation Out Not Affiliation " + "Owner", /* 15h */ "Open Transmit DMA Abort", /* 16h */ "IO Device Missing Delay Retry", /* 17h */ - NULL, /* 18h */ + "IO Cancelled Due to Recieve Error", /* 18h */ NULL, /* 19h */ NULL, /* 1Ah */ NULL, /* 1Bh */ @@ -6218,6 +6487,96 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info) NULL, /* 1Fh */ "Enclosure Management" /* 20h */ }; + static char *ir_code_str[] = { + "Raid Action Error", /* 00h */ + NULL, /* 00h */ + NULL, /* 01h */ + NULL, /* 02h */ + NULL, /* 03h */ + NULL, /* 04h */ + NULL, /* 05h */ + NULL, /* 06h */ + NULL /* 07h */ + }; + static char *raid_sub_code_str[] = { + NULL, /* 00h */ + "Volume Creation Failed: Data Passed too " + "Large", /* 01h */ + "Volume Creation Failed: Duplicate Volumes " + "Attempted", /* 02h */ + "Volume Creation Failed: Max Number " + "Supported Volumes Exceeded", /* 03h */ + "Volume Creation Failed: DMA Error", /* 04h */ + "Volume Creation Failed: Invalid Volume Type", /* 05h */ + "Volume Creation Failed: Error Reading " + "MFG Page 4", /* 06h */ + "Volume Creation Failed: Creating Internal " + "Structures", /* 07h */ + NULL, /* 08h */ + NULL, /* 09h */ + NULL, /* 0Ah */ + NULL, /* 0Bh */ + NULL, /* 0Ch */ + NULL, /* 0Dh */ + NULL, /* 0Eh */ + NULL, /* 0Fh */ + "Activation failed: Already Active Volume", /* 10h */ + "Activation failed: Unsupported Volume Type", /* 11h */ + "Activation failed: Too Many Active Volumes", /* 12h */ + "Activation failed: Volume ID in Use", /* 13h */ + "Activation failed: Reported Failure", /* 14h */ + "Activation failed: Importing a Volume", /* 15h */ + NULL, /* 16h */ + NULL, /* 17h */ + NULL, /* 18h */ + NULL, /* 19h */ + NULL, /* 1Ah */ + NULL, /* 1Bh */ + NULL, /* 1Ch */ + NULL, /* 1Dh */ + NULL, /* 1Eh */ + NULL, /* 1Fh */ + "Phys Disk failed: Too Many Phys Disks", /* 20h */ + "Phys Disk failed: Data Passed too Large", /* 21h */ + "Phys Disk failed: DMA Error", /* 22h */ + "Phys Disk failed: Invalid <channel:id>", /* 23h */ + "Phys Disk failed: Creating Phys Disk Config " + "Page", /* 24h */ + NULL, /* 25h */ + NULL, /* 26h */ + NULL, /* 27h */ + NULL, /* 28h */ + NULL, /* 29h */ + NULL, /* 2Ah */ + NULL, /* 2Bh */ + NULL, /* 2Ch */ + NULL, /* 2Dh */ + NULL, /* 2Eh */ + NULL, /* 2Fh */ + "Compatibility Error: IR Disabled", /* 30h */ + "Compatibility Error: Inquiry Comand Failed", /* 31h */ + "Compatibility Error: Device not Direct Access " + "Device ", /* 32h */ + "Compatibility Error: Removable Device Found", /* 33h */ + "Compatibility Error: Device SCSI Version not " + "2 or Higher", /* 34h */ + "Compatibility Error: SATA Device, 48 BIT LBA " + "not Supported", /* 35h */ + "Compatibility Error: Device doesn't have " + "512 Byte Block Sizes", /* 36h */ + "Compatibility Error: Volume Type Check Failed", /* 37h */ + "Compatibility Error: Volume Type is " + "Unsupported by FW", /* 38h */ + "Compatibility Error: Disk Drive too Small for " + "use in Volume", /* 39h */ + "Compatibility Error: Phys Disk for Create " + "Volume not Found", /* 3Ah */ + "Compatibility Error: Too Many or too Few " + "Disks for Volume Type", /* 3Bh */ + "Compatibility Error: Disk stripe Sizes " + "Must be 64KB", /* 3Ch */ + "Compatibility Error: IME Size Limited to < 2TB", /* 3Dh */ + }; /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** @@ -6226,7 +6585,7 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info) * @log_info: U32 LogInfo reply word from the IOC * * Refer to lsi/mpi_log_sas.h. - */ + **/ static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info) { @@ -6240,56 +6599,165 @@ union loginfo_type { }dw; }; union loginfo_type sas_loginfo; + char *originator_desc = NULL; char *code_desc = NULL; + char *sub_code_desc = NULL; sas_loginfo.loginfo = log_info; if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) && (sas_loginfo.dw.originator < sizeof(originator_str)/sizeof(char*))) return; - if ((sas_loginfo.dw.originator == 0 /*IOP*/) && - (sas_loginfo.dw.code < sizeof(iop_code_str)/sizeof(char*))) { - code_desc = iop_code_str[sas_loginfo.dw.code]; - }else if ((sas_loginfo.dw.originator == 1 /*PL*/) && - (sas_loginfo.dw.code < sizeof(pl_code_str)/sizeof(char*) )) { - code_desc = pl_code_str[sas_loginfo.dw.code]; + + originator_desc = originator_str[sas_loginfo.dw.originator]; + + switch (sas_loginfo.dw.originator) { + + case 0: /* IOP */ + if (sas_loginfo.dw.code < + sizeof(iop_code_str)/sizeof(char*)) + code_desc = iop_code_str[sas_loginfo.dw.code]; + break; + case 1: /* PL */ + if (sas_loginfo.dw.code < + sizeof(pl_code_str)/sizeof(char*)) + code_desc = pl_code_str[sas_loginfo.dw.code]; + break; + case 2: /* IR */ + if (sas_loginfo.dw.code >= + sizeof(ir_code_str)/sizeof(char*)) + break; + code_desc = ir_code_str[sas_loginfo.dw.code]; + if (sas_loginfo.dw.subcode >= + sizeof(raid_sub_code_str)/sizeof(char*)) + break; + if (sas_loginfo.dw.code == 0) + sub_code_desc = + raid_sub_code_str[sas_loginfo.dw.subcode]; + break; + default: + return; } - if (code_desc != NULL) + if (sub_code_desc != NULL) + printk(MYIOC_s_INFO_FMT + "LogInfo(0x%08x): Originator={%s}, Code={%s}," + " SubCode={%s}\n", + ioc->name, log_info, originator_desc, code_desc, + sub_code_desc); + else if (code_desc != NULL) printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): Originator={%s}, Code={%s}," " SubCode(0x%04x)\n", - ioc->name, - log_info, - originator_str[sas_loginfo.dw.originator], - code_desc, + ioc->name, log_info, originator_desc, code_desc, sas_loginfo.dw.subcode); else printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): Originator={%s}, Code=(0x%02x)," " SubCode(0x%04x)\n", - ioc->name, - log_info, - originator_str[sas_loginfo.dw.originator], - sas_loginfo.dw.code, - sas_loginfo.dw.subcode); + ioc->name, log_info, originator_desc, + sas_loginfo.dw.code, sas_loginfo.dw.subcode); } +#ifdef MPT_DEBUG_REPLY /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** - * mpt_sp_ioc_info - IOC information returned from SCSI Parallel IOC. + * mpt_iocstatus_info_config - IOCSTATUS information for config pages + * @ioc: Pointer to MPT_ADAPTER structure + * ioc_status: U32 IOCStatus word from IOC + * @mf: Pointer to MPT request frame + * + * Refer to lsi/mpi.h. + **/ +static void +mpt_iocstatus_info_config(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf) +{ + Config_t *pReq = (Config_t *)mf; + char extend_desc[EVENT_DESCR_STR_SZ]; + char *desc = NULL; + u32 form; + u8 page_type; + + if (pReq->Header.PageType == MPI_CONFIG_PAGETYPE_EXTENDED) + page_type = pReq->ExtPageType; + else + page_type = pReq->Header.PageType; + + /* + * ignore invalid page messages for GET_NEXT_HANDLE + */ + form = le32_to_cpu(pReq->PageAddress); + if (ioc_status == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) { + if (page_type == MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE || + page_type == MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER || + page_type == MPI_CONFIG_EXTPAGETYPE_ENCLOSURE) { + if ((form >> MPI_SAS_DEVICE_PGAD_FORM_SHIFT) == + MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE) + return; + } + if (page_type == MPI_CONFIG_PAGETYPE_FC_DEVICE) + if ((form & MPI_FC_DEVICE_PGAD_FORM_MASK) == + MPI_FC_DEVICE_PGAD_FORM_NEXT_DID) + return; + } + + snprintf(extend_desc, EVENT_DESCR_STR_SZ, + "type=%02Xh, page=%02Xh, action=%02Xh, form=%08Xh", + page_type, pReq->Header.PageNumber, pReq->Action, form); + + switch (ioc_status) { + + case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */ + desc = "Config Page Invalid Action"; + break; + + case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */ + desc = "Config Page Invalid Type"; + break; + + case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */ + desc = "Config Page Invalid Page"; + break; + + case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */ + desc = "Config Page Invalid Data"; + break; + + case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */ + desc = "Config Page No Defaults"; + break; + + case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */ + desc = "Config Page Can't Commit"; + break; + } + + if (!desc) + return; + + printk(MYIOC_s_INFO_FMT "IOCStatus(0x%04X): %s: %s\n", + ioc->name, ioc_status, desc, extend_desc); +} + +/** + * mpt_iocstatus_info - IOCSTATUS information returned from IOC. * @ioc: Pointer to MPT_ADAPTER structure * @ioc_status: U32 IOCStatus word from IOC * @mf: Pointer to MPT request frame * * Refer to lsi/mpi.h. - */ + **/ static void -mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf) +mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf) { u32 status = ioc_status & MPI_IOCSTATUS_MASK; char *desc = NULL; switch (status) { + +/****************************************************************************/ +/* Common IOCStatus values for all replies */ +/****************************************************************************/ + case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */ desc = "Invalid Function"; break; @@ -6322,84 +6790,180 @@ mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf) desc = "Invalid State"; break; +/****************************************************************************/ +/* Config IOCStatus values */ +/****************************************************************************/ + case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */ case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */ case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */ case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */ case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */ case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */ - /* No message for Config IOCStatus values */ + mpt_iocstatus_info_config(ioc, status, mf); break; +/****************************************************************************/ +/* SCSIIO Reply (SPI, FCP, SAS) initiator values */ +/* */ +/* Look at mptscsih_iocstatus_info_scsiio in mptscsih.c */ +/* */ +/****************************************************************************/ + case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */ - /* No message for recovered error - desc = "SCSI Recovered Error"; - */ + case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */ + case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */ + case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */ + case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */ + case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */ + case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */ + case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */ + case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */ + case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */ + case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */ + case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */ + case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */ break; - case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */ - desc = "SCSI Invalid Bus"; +/****************************************************************************/ +/* SCSI Target values */ +/****************************************************************************/ + + case MPI_IOCSTATUS_TARGET_PRIORITY_IO: /* 0x0060 */ + desc = "Target: Priority IO"; break; - case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */ - desc = "SCSI Invalid TargetID"; + case MPI_IOCSTATUS_TARGET_INVALID_PORT: /* 0x0061 */ + desc = "Target: Invalid Port"; break; - case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */ - { - SCSIIORequest_t *pScsiReq = (SCSIIORequest_t *) mf; - U8 cdb = pScsiReq->CDB[0]; - if (cdb != 0x12) { /* Inquiry is issued for device scanning */ - desc = "SCSI Device Not There"; - } + case MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX: /* 0x0062 */ + desc = "Target Invalid IO Index:"; break; - } - case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */ - desc = "SCSI Data Overrun"; + case MPI_IOCSTATUS_TARGET_ABORTED: /* 0x0063 */ + desc = "Target: Aborted"; break; - case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */ - /* This error is checked in scsi_io_done(). Skip. - desc = "SCSI Data Underrun"; - */ + case MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: /* 0x0064 */ + desc = "Target: No Conn Retryable"; break; - case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */ - desc = "SCSI I/O Data Error"; + case MPI_IOCSTATUS_TARGET_NO_CONNECTION: /* 0x0065 */ + desc = "Target: No Connection"; break; - case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */ - desc = "SCSI Protocol Error"; + case MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: /* 0x006A */ + desc = "Target: Transfer Count Mismatch"; break; - case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */ - desc = "SCSI Task Terminated"; + case MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT: /* 0x006B */ + desc = "Target: STS Data not Sent"; break; - case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */ - desc = "SCSI Residual Mismatch"; + case MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: /* 0x006D */ + desc = "Target: Data Offset Error"; break; - case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */ - desc = "SCSI Task Management Failed"; + case MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: /* 0x006E */ + desc = "Target: Too Much Write Data"; break; - case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */ - desc = "SCSI IOC Terminated"; + case MPI_IOCSTATUS_TARGET_IU_TOO_SHORT: /* 0x006F */ + desc = "Target: IU Too Short"; break; - case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */ - desc = "SCSI Ext Terminated"; + case MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: /* 0x0070 */ + desc = "Target: ACK NAK Timeout"; + break; + + case MPI_IOCSTATUS_TARGET_NAK_RECEIVED: /* 0x0071 */ + desc = "Target: Nak Received"; + break; + +/****************************************************************************/ +/* Fibre Channel Direct Access values */ +/****************************************************************************/ + + case MPI_IOCSTATUS_FC_ABORTED: /* 0x0066 */ + desc = "FC: Aborted"; + break; + + case MPI_IOCSTATUS_FC_RX_ID_INVALID: /* 0x0067 */ + desc = "FC: RX ID Invalid"; + break; + + case MPI_IOCSTATUS_FC_DID_INVALID: /* 0x0068 */ + desc = "FC: DID Invalid"; + break; + + case MPI_IOCSTATUS_FC_NODE_LOGGED_OUT: /* 0x0069 */ + desc = "FC: Node Logged Out"; + break; + + case MPI_IOCSTATUS_FC_EXCHANGE_CANCELED: /* 0x006C */ + desc = "FC: Exchange Canceled"; + break; + +/****************************************************************************/ +/* LAN values */ +/****************************************************************************/ + + case MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND: /* 0x0080 */ + desc = "LAN: Device not Found"; + break; + + case MPI_IOCSTATUS_LAN_DEVICE_FAILURE: /* 0x0081 */ + desc = "LAN: Device Failure"; + break; + + case MPI_IOCSTATUS_LAN_TRANSMIT_ERROR: /* 0x0082 */ + desc = "LAN: Transmit Error"; + break; + + case MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED: /* 0x0083 */ + desc = "LAN: Transmit Aborted"; + break; + + case MPI_IOCSTATUS_LAN_RECEIVE_ERROR: /* 0x0084 */ + desc = "LAN: Receive Error"; + break; + + case MPI_IOCSTATUS_LAN_RECEIVE_ABORTED: /* 0x0085 */ + desc = "LAN: Receive Aborted"; + break; + + case MPI_IOCSTATUS_LAN_PARTIAL_PACKET: /* 0x0086 */ + desc = "LAN: Partial Packet"; + break; + + case MPI_IOCSTATUS_LAN_CANCELED: /* 0x0087 */ + desc = "LAN: Canceled"; + break; + +/****************************************************************************/ +/* Serial Attached SCSI values */ +/****************************************************************************/ + + case MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED: /* 0x0090 */ + desc = "SAS: SMP Request Failed"; + break; + + case MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN: /* 0x0090 */ + desc = "SAS: SMP Data Overrun"; break; default: desc = "Others"; break; } - if (desc != NULL) - printk(MYIOC_s_INFO_FMT "IOCStatus(0x%04x): %s\n", ioc->name, status, desc); + + if (!desc) + return; + + printk(MYIOC_s_INFO_FMT "IOCStatus(0x%04X): %s\n", ioc->name, status, desc); } +#endif /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ EXPORT_SYMBOL(mpt_attach); @@ -6434,6 +6998,7 @@ EXPORT_SYMBOL(mpt_findImVolumes); EXPORT_SYMBOL(mpt_alloc_fw_memory); EXPORT_SYMBOL(mpt_free_fw_memory); EXPORT_SYMBOL(mptbase_sas_persist_operation); +EXPORT_SYMBOL(mpt_raid_phys_disk_pg0); /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** |