aboutsummaryrefslogtreecommitdiff
path: root/drivers/misc/sgi-xp/xp.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/misc/sgi-xp/xp.h')
-rw-r--r--drivers/misc/sgi-xp/xp.h485
1 files changed, 485 insertions, 0 deletions
diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h
new file mode 100644
index 00000000000..fb65981754c
--- /dev/null
+++ b/drivers/misc/sgi-xp/xp.h
@@ -0,0 +1,485 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004-2008 Silicon Graphics, Inc. All rights reserved.
+ */
+
+
+/*
+ * External Cross Partition (XP) structures and defines.
+ */
+
+
+#ifndef _DRIVERS_MISC_SGIXP_XP_H
+#define _DRIVERS_MISC_SGIXP_XP_H
+
+
+#include <linux/cache.h>
+#include <linux/hardirq.h>
+#include <linux/mutex.h>
+#include <asm/sn/types.h>
+#include <asm/sn/bte.h>
+
+
+#ifdef USE_DBUG_ON
+#define DBUG_ON(condition) BUG_ON(condition)
+#else
+#define DBUG_ON(condition)
+#endif
+
+
+/*
+ * Define the maximum number of logically defined partitions the system
+ * can support. It is constrained by the maximum number of hardware
+ * partitionable regions. The term 'region' in this context refers to the
+ * minimum number of nodes that can comprise an access protection grouping.
+ * The access protection is in regards to memory, IPI and IOI.
+ *
+ * The maximum number of hardware partitionable regions is equal to the
+ * maximum number of nodes in the entire system divided by the minimum number
+ * of nodes that comprise an access protection grouping.
+ */
+#define XP_MAX_PARTITIONS 64
+
+
+/*
+ * Define the number of u64s required to represent all the C-brick nasids
+ * as a bitmap. The cross-partition kernel modules deal only with
+ * C-brick nasids, thus the need for bitmaps which don't account for
+ * odd-numbered (non C-brick) nasids.
+ */
+#define XP_MAX_PHYSNODE_ID (MAX_NUMALINK_NODES / 2)
+#define XP_NASID_MASK_BYTES ((XP_MAX_PHYSNODE_ID + 7) / 8)
+#define XP_NASID_MASK_WORDS ((XP_MAX_PHYSNODE_ID + 63) / 64)
+
+
+/*
+ * Wrapper for bte_copy() that should it return a failure status will retry
+ * the bte_copy() once in the hope that the failure was due to a temporary
+ * aberration (i.e., the link going down temporarily).
+ *
+ * src - physical address of the source of the transfer.
+ * vdst - virtual address of the destination of the transfer.
+ * len - number of bytes to transfer from source to destination.
+ * mode - see bte_copy() for definition.
+ * notification - see bte_copy() for definition.
+ *
+ * Note: xp_bte_copy() should never be called while holding a spinlock.
+ */
+static inline bte_result_t
+xp_bte_copy(u64 src, u64 vdst, u64 len, u64 mode, void *notification)
+{
+ bte_result_t ret;
+ u64 pdst = ia64_tpa(vdst);
+
+
+ /*
+ * Ensure that the physically mapped memory is contiguous.
+ *
+ * We do this by ensuring that the memory is from region 7 only.
+ * If the need should arise to use memory from one of the other
+ * regions, then modify the BUG_ON() statement to ensure that the
+ * memory from that region is always physically contiguous.
+ */
+ BUG_ON(REGION_NUMBER(vdst) != RGN_KERNEL);
+
+ ret = bte_copy(src, pdst, len, mode, notification);
+ if ((ret != BTE_SUCCESS) && BTE_ERROR_RETRY(ret)) {
+ if (!in_interrupt()) {
+ cond_resched();
+ }
+ ret = bte_copy(src, pdst, len, mode, notification);
+ }
+
+ return ret;
+}
+
+
+/*
+ * XPC establishes channel connections between the local partition and any
+ * other partition that is currently up. Over these channels, kernel-level
+ * `users' can communicate with their counterparts on the other partitions.
+ *
+ * The maxinum number of channels is limited to eight. For performance reasons,
+ * the internal cross partition structures require sixteen bytes per channel,
+ * and eight allows all of this interface-shared info to fit in one cache line.
+ *
+ * XPC_NCHANNELS reflects the total number of channels currently defined.
+ * If the need for additional channels arises, one can simply increase
+ * XPC_NCHANNELS accordingly. If the day should come where that number
+ * exceeds the MAXIMUM number of channels allowed (eight), then one will need
+ * to make changes to the XPC code to allow for this.
+ */
+#define XPC_MEM_CHANNEL 0 /* memory channel number */
+#define XPC_NET_CHANNEL 1 /* network channel number */
+
+#define XPC_NCHANNELS 2 /* #of defined channels */
+#define XPC_MAX_NCHANNELS 8 /* max #of channels allowed */
+
+#if XPC_NCHANNELS > XPC_MAX_NCHANNELS
+#error XPC_NCHANNELS exceeds MAXIMUM allowed.
+#endif
+
+
+/*
+ * The format of an XPC message is as follows:
+ *
+ * +-------+--------------------------------+
+ * | flags |////////////////////////////////|
+ * +-------+--------------------------------+
+ * | message # |
+ * +----------------------------------------+
+ * | payload (user-defined message) |
+ * | |
+ * :
+ * | |
+ * +----------------------------------------+
+ *
+ * The size of the payload is defined by the user via xpc_connect(). A user-
+ * defined message resides in the payload area.
+ *
+ * The user should have no dealings with the message header, but only the
+ * message's payload. When a message entry is allocated (via xpc_allocate())
+ * a pointer to the payload area is returned and not the actual beginning of
+ * the XPC message. The user then constructs a message in the payload area
+ * and passes that pointer as an argument on xpc_send() or xpc_send_notify().
+ *
+ * The size of a message entry (within a message queue) must be a cacheline
+ * sized multiple in order to facilitate the BTE transfer of messages from one
+ * message queue to another. A macro, XPC_MSG_SIZE(), is provided for the user
+ * that wants to fit as many msg entries as possible in a given memory size
+ * (e.g. a memory page).
+ */
+struct xpc_msg {
+ u8 flags; /* FOR XPC INTERNAL USE ONLY */
+ u8 reserved[7]; /* FOR XPC INTERNAL USE ONLY */
+ s64 number; /* FOR XPC INTERNAL USE ONLY */
+
+ u64 payload; /* user defined portion of message */
+};
+
+
+#define XPC_MSG_PAYLOAD_OFFSET (u64) (&((struct xpc_msg *)0)->payload)
+#define XPC_MSG_SIZE(_payload_size) \
+ L1_CACHE_ALIGN(XPC_MSG_PAYLOAD_OFFSET + (_payload_size))
+
+
+/*
+ * Define the return values and values passed to user's callout functions.
+ * (It is important to add new value codes at the end just preceding
+ * xpcUnknownReason, which must have the highest numerical value.)
+ */
+enum xpc_retval {
+ xpcSuccess = 0,
+
+ xpcNotConnected, /* 1: channel is not connected */
+ xpcConnected, /* 2: channel connected (opened) */
+ xpcRETIRED1, /* 3: (formerly xpcDisconnected) */
+
+ xpcMsgReceived, /* 4: message received */
+ xpcMsgDelivered, /* 5: message delivered and acknowledged */
+
+ xpcRETIRED2, /* 6: (formerly xpcTransferFailed) */
+
+ xpcNoWait, /* 7: operation would require wait */
+ xpcRetry, /* 8: retry operation */
+ xpcTimeout, /* 9: timeout in xpc_allocate_msg_wait() */
+ xpcInterrupted, /* 10: interrupted wait */
+
+ xpcUnequalMsgSizes, /* 11: message size disparity between sides */
+ xpcInvalidAddress, /* 12: invalid address */
+
+ xpcNoMemory, /* 13: no memory available for XPC structures */
+ xpcLackOfResources, /* 14: insufficient resources for operation */
+ xpcUnregistered, /* 15: channel is not registered */
+ xpcAlreadyRegistered, /* 16: channel is already registered */
+
+ xpcPartitionDown, /* 17: remote partition is down */
+ xpcNotLoaded, /* 18: XPC module is not loaded */
+ xpcUnloading, /* 19: this side is unloading XPC module */
+
+ xpcBadMagic, /* 20: XPC MAGIC string not found */
+
+ xpcReactivating, /* 21: remote partition was reactivated */
+
+ xpcUnregistering, /* 22: this side is unregistering channel */
+ xpcOtherUnregistering, /* 23: other side is unregistering channel */
+
+ xpcCloneKThread, /* 24: cloning kernel thread */
+ xpcCloneKThreadFailed, /* 25: cloning kernel thread failed */
+
+ xpcNoHeartbeat, /* 26: remote partition has no heartbeat */
+
+ xpcPioReadError, /* 27: PIO read error */
+ xpcPhysAddrRegFailed, /* 28: registration of phys addr range failed */
+
+ xpcBteDirectoryError, /* 29: maps to BTEFAIL_DIR */
+ xpcBtePoisonError, /* 30: maps to BTEFAIL_POISON */
+ xpcBteWriteError, /* 31: maps to BTEFAIL_WERR */
+ xpcBteAccessError, /* 32: maps to BTEFAIL_ACCESS */
+ xpcBtePWriteError, /* 33: maps to BTEFAIL_PWERR */
+ xpcBtePReadError, /* 34: maps to BTEFAIL_PRERR */
+ xpcBteTimeOutError, /* 35: maps to BTEFAIL_TOUT */
+ xpcBteXtalkError, /* 36: maps to BTEFAIL_XTERR */
+ xpcBteNotAvailable, /* 37: maps to BTEFAIL_NOTAVAIL */
+ xpcBteUnmappedError, /* 38: unmapped BTEFAIL_ error */
+
+ xpcBadVersion, /* 39: bad version number */
+ xpcVarsNotSet, /* 40: the XPC variables are not set up */
+ xpcNoRsvdPageAddr, /* 41: unable to get rsvd page's phys addr */
+ xpcInvalidPartid, /* 42: invalid partition ID */
+ xpcLocalPartid, /* 43: local partition ID */
+
+ xpcOtherGoingDown, /* 44: other side going down, reason unknown */
+ xpcSystemGoingDown, /* 45: system is going down, reason unknown */
+ xpcSystemHalt, /* 46: system is being halted */
+ xpcSystemReboot, /* 47: system is being rebooted */
+ xpcSystemPoweroff, /* 48: system is being powered off */
+
+ xpcDisconnecting, /* 49: channel disconnecting (closing) */
+
+ xpcOpenCloseError, /* 50: channel open/close protocol error */
+
+ xpcDisconnected, /* 51: channel disconnected (closed) */
+
+ xpcBteSh2Start, /* 52: BTE CRB timeout */
+
+ /* 53: 0x1 BTE Error Response Short */
+ xpcBteSh2RspShort = xpcBteSh2Start + BTEFAIL_SH2_RESP_SHORT,
+
+ /* 54: 0x2 BTE Error Response Long */
+ xpcBteSh2RspLong = xpcBteSh2Start + BTEFAIL_SH2_RESP_LONG,
+
+ /* 56: 0x4 BTE Error Response DSB */
+ xpcBteSh2RspDSB = xpcBteSh2Start + BTEFAIL_SH2_RESP_DSP,
+
+ /* 60: 0x8 BTE Error Response Access */
+ xpcBteSh2RspAccess = xpcBteSh2Start + BTEFAIL_SH2_RESP_ACCESS,
+
+ /* 68: 0x10 BTE Error CRB timeout */
+ xpcBteSh2CRBTO = xpcBteSh2Start + BTEFAIL_SH2_CRB_TO,
+
+ /* 84: 0x20 BTE Error NACK limit */
+ xpcBteSh2NACKLimit = xpcBteSh2Start + BTEFAIL_SH2_NACK_LIMIT,
+
+ /* 115: BTE end */
+ xpcBteSh2End = xpcBteSh2Start + BTEFAIL_SH2_ALL,
+
+ xpcUnknownReason /* 116: unknown reason -- must be last in list */
+};
+
+
+/*
+ * Define the callout function types used by XPC to update the user on
+ * connection activity and state changes (via the user function registered by
+ * xpc_connect()) and to notify them of messages received and delivered (via
+ * the user function registered by xpc_send_notify()).
+ *
+ * The two function types are xpc_channel_func and xpc_notify_func and
+ * both share the following arguments, with the exception of "data", which
+ * only xpc_channel_func has.
+ *
+ * Arguments:
+ *
+ * reason - reason code. (See following table.)
+ * partid - partition ID associated with condition.
+ * ch_number - channel # associated with condition.
+ * data - pointer to optional data. (See following table.)
+ * key - pointer to optional user-defined value provided as the "key"
+ * argument to xpc_connect() or xpc_send_notify().
+ *
+ * In the following table the "Optional Data" column applies to callouts made
+ * to functions registered by xpc_connect(). A "NA" in that column indicates
+ * that this reason code can be passed to functions registered by
+ * xpc_send_notify() (i.e. they don't have data arguments).
+ *
+ * Also, the first three reason codes in the following table indicate
+ * success, whereas the others indicate failure. When a failure reason code
+ * is received, one can assume that the channel is not connected.
+ *
+ *
+ * Reason Code | Cause | Optional Data
+ * =====================+================================+=====================
+ * xpcConnected | connection has been established| max #of entries
+ * | to the specified partition on | allowed in message
+ * | the specified channel | queue
+ * ---------------------+--------------------------------+---------------------
+ * xpcMsgReceived | an XPC message arrived from | address of payload
+ * | the specified partition on the |
+ * | specified channel | [the user must call
+ * | | xpc_received() when
+ * | | finished with the
+ * | | payload]
+ * ---------------------+--------------------------------+---------------------
+ * xpcMsgDelivered | notification that the message | NA
+ * | was delivered to the intended |
+ * | recipient and that they have |
+ * | acknowledged its receipt by |
+ * | calling xpc_received() |
+ * =====================+================================+=====================
+ * xpcUnequalMsgSizes | can't connect to the specified | NULL
+ * | partition on the specified |
+ * | channel because of mismatched |
+ * | message sizes |
+ * ---------------------+--------------------------------+---------------------
+ * xpcNoMemory | insufficient memory avaiable | NULL
+ * | to allocate message queue |
+ * ---------------------+--------------------------------+---------------------
+ * xpcLackOfResources | lack of resources to create | NULL
+ * | the necessary kthreads to |
+ * | support the channel |
+ * ---------------------+--------------------------------+---------------------
+ * xpcUnregistering | this side's user has | NULL or NA
+ * | unregistered by calling |
+ * | xpc_disconnect() |
+ * ---------------------+--------------------------------+---------------------
+ * xpcOtherUnregistering| the other side's user has | NULL or NA
+ * | unregistered by calling |
+ * | xpc_disconnect() |
+ * ---------------------+--------------------------------+---------------------
+ * xpcNoHeartbeat | the other side's XPC is no | NULL or NA
+ * | longer heartbeating |
+ * | |
+ * ---------------------+--------------------------------+---------------------
+ * xpcUnloading | this side's XPC module is | NULL or NA
+ * | being unloaded |
+ * | |
+ * ---------------------+--------------------------------+---------------------
+ * xpcOtherUnloading | the other side's XPC module is | NULL or NA
+ * | is being unloaded |
+ * | |
+ * ---------------------+--------------------------------+---------------------
+ * xpcPioReadError | xp_nofault_PIOR() returned an | NULL or NA
+ * | error while sending an IPI |
+ * | |
+ * ---------------------+--------------------------------+---------------------
+ * xpcInvalidAddress | the address either received or | NULL or NA
+ * | sent by the specified partition|
+ * | is invalid |
+ * ---------------------+--------------------------------+---------------------
+ * xpcBteNotAvailable | attempt to pull data from the | NULL or NA
+ * xpcBtePoisonError | specified partition over the |
+ * xpcBteWriteError | specified channel via a |
+ * xpcBteAccessError | bte_copy() failed |
+ * xpcBteTimeOutError | |
+ * xpcBteXtalkError | |
+ * xpcBteDirectoryError | |
+ * xpcBteGenericError | |
+ * xpcBteUnmappedError | |
+ * ---------------------+--------------------------------+---------------------
+ * xpcUnknownReason | the specified channel to the | NULL or NA
+ * | specified partition was |
+ * | unavailable for unknown reasons|
+ * =====================+================================+=====================
+ */
+
+typedef void (*xpc_channel_func)(enum xpc_retval reason, partid_t partid,
+ int ch_number, void *data, void *key);
+
+typedef void (*xpc_notify_func)(enum xpc_retval reason, partid_t partid,
+ int ch_number, void *key);
+
+
+/*
+ * The following is a registration entry. There is a global array of these,
+ * one per channel. It is used to record the connection registration made
+ * by the users of XPC. As long as a registration entry exists, for any
+ * partition that comes up, XPC will attempt to establish a connection on
+ * that channel. Notification that a connection has been made will occur via
+ * the xpc_channel_func function.
+ *
+ * The 'func' field points to the function to call when aynchronous
+ * notification is required for such events as: a connection established/lost,
+ * or an incoming message received, or an error condition encountered. A
+ * non-NULL 'func' field indicates that there is an active registration for
+ * the channel.
+ */
+struct xpc_registration {
+ struct mutex mutex;
+ xpc_channel_func func; /* function to call */
+ void *key; /* pointer to user's key */
+ u16 nentries; /* #of msg entries in local msg queue */
+ u16 msg_size; /* message queue's message size */
+ u32 assigned_limit; /* limit on #of assigned kthreads */
+ u32 idle_limit; /* limit on #of idle kthreads */
+} ____cacheline_aligned;
+
+
+#define XPC_CHANNEL_REGISTERED(_c) (xpc_registrations[_c].func != NULL)
+
+
+/* the following are valid xpc_allocate() flags */
+#define XPC_WAIT 0 /* wait flag */
+#define XPC_NOWAIT 1 /* no wait flag */
+
+
+struct xpc_interface {
+ void (*connect)(int);
+ void (*disconnect)(int);
+ enum xpc_retval (*allocate)(partid_t, int, u32, void **);
+ enum xpc_retval (*send)(partid_t, int, void *);
+ enum xpc_retval (*send_notify)(partid_t, int, void *,
+ xpc_notify_func, void *);
+ void (*received)(partid_t, int, void *);
+ enum xpc_retval (*partid_to_nasids)(partid_t, void *);
+};
+
+
+extern struct xpc_interface xpc_interface;
+
+extern void xpc_set_interface(void (*)(int),
+ void (*)(int),
+ enum xpc_retval (*)(partid_t, int, u32, void **),
+ enum xpc_retval (*)(partid_t, int, void *),
+ enum xpc_retval (*)(partid_t, int, void *, xpc_notify_func,
+ void *),
+ void (*)(partid_t, int, void *),
+ enum xpc_retval (*)(partid_t, void *));
+extern void xpc_clear_interface(void);
+
+
+extern enum xpc_retval xpc_connect(int, xpc_channel_func, void *, u16,
+ u16, u32, u32);
+extern void xpc_disconnect(int);
+
+static inline enum xpc_retval
+xpc_allocate(partid_t partid, int ch_number, u32 flags, void **payload)
+{
+ return xpc_interface.allocate(partid, ch_number, flags, payload);
+}
+
+static inline enum xpc_retval
+xpc_send(partid_t partid, int ch_number, void *payload)
+{
+ return xpc_interface.send(partid, ch_number, payload);
+}
+
+static inline enum xpc_retval
+xpc_send_notify(partid_t partid, int ch_number, void *payload,
+ xpc_notify_func func, void *key)
+{
+ return xpc_interface.send_notify(partid, ch_number, payload, func, key);
+}
+
+static inline void
+xpc_received(partid_t partid, int ch_number, void *payload)
+{
+ return xpc_interface.received(partid, ch_number, payload);
+}
+
+static inline enum xpc_retval
+xpc_partid_to_nasids(partid_t partid, void *nasids)
+{
+ return xpc_interface.partid_to_nasids(partid, nasids);
+}
+
+
+extern u64 xp_nofault_PIOR_target;
+extern int xp_nofault_PIOR(void *);
+extern int xp_error_PIOR(void);
+
+
+#endif /* _DRIVERS_MISC_SGIXP_XP_H */
+