aboutsummaryrefslogtreecommitdiff
path: root/drivers/mmc/host
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/host')
-rw-r--r--drivers/mmc/host/atmel-mci.c5
-rw-r--r--drivers/mmc/host/omap_hsmmc.c98
-rw-r--r--drivers/mmc/host/s3cmci.c5
-rw-r--r--drivers/mmc/host/sdhci-pci.c4
-rw-r--r--drivers/mmc/host/sdhci.c12
-rw-r--r--drivers/mmc/host/sdhci.h5
6 files changed, 86 insertions, 43 deletions
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 76bfe16c09b..2b1196e6142 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -1548,9 +1548,10 @@ static bool filter(struct dma_chan *chan, void *slave)
{
struct dw_dma_slave *dws = slave;
- if (dws->dma_dev == chan->device->dev)
+ if (dws->dma_dev == chan->device->dev) {
+ chan->private = dws;
return true;
- else
+ } else
return false;
}
#endif
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index db37490f67e..a631c81dce1 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -55,6 +55,7 @@
#define VS30 (1 << 25)
#define SDVS18 (0x5 << 9)
#define SDVS30 (0x6 << 9)
+#define SDVS33 (0x7 << 9)
#define SDVSCLR 0xFFFFF1FF
#define SDVSDET 0x00000400
#define AUTOIDLE 0x1
@@ -375,6 +376,32 @@ static void mmc_omap_report_irq(struct mmc_omap_host *host, u32 status)
}
#endif /* CONFIG_MMC_DEBUG */
+/*
+ * MMC controller internal state machines reset
+ *
+ * Used to reset command or data internal state machines, using respectively
+ * SRC or SRD bit of SYSCTL register
+ * Can be called from interrupt context
+ */
+static inline void mmc_omap_reset_controller_fsm(struct mmc_omap_host *host,
+ unsigned long bit)
+{
+ unsigned long i = 0;
+ unsigned long limit = (loops_per_jiffy *
+ msecs_to_jiffies(MMC_TIMEOUT_MS));
+
+ OMAP_HSMMC_WRITE(host->base, SYSCTL,
+ OMAP_HSMMC_READ(host->base, SYSCTL) | bit);
+
+ while ((OMAP_HSMMC_READ(host->base, SYSCTL) & bit) &&
+ (i++ < limit))
+ cpu_relax();
+
+ if (OMAP_HSMMC_READ(host->base, SYSCTL) & bit)
+ dev_err(mmc_dev(host->mmc),
+ "Timeout waiting on controller reset in %s\n",
+ __func__);
+}
/*
* MMC controller IRQ handler
@@ -403,21 +430,17 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
(status & CMD_CRC)) {
if (host->cmd) {
if (status & CMD_TIMEOUT) {
- OMAP_HSMMC_WRITE(host->base, SYSCTL,
- OMAP_HSMMC_READ(host->base,
- SYSCTL) | SRC);
- while (OMAP_HSMMC_READ(host->base,
- SYSCTL) & SRC)
- ;
-
+ mmc_omap_reset_controller_fsm(host, SRC);
host->cmd->error = -ETIMEDOUT;
} else {
host->cmd->error = -EILSEQ;
}
end_cmd = 1;
}
- if (host->data)
+ if (host->data) {
mmc_dma_cleanup(host);
+ mmc_omap_reset_controller_fsm(host, SRD);
+ }
}
if ((status & DATA_TIMEOUT) ||
(status & DATA_CRC)) {
@@ -426,12 +449,7 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
mmc_dma_cleanup(host);
else
host->data->error = -EILSEQ;
- OMAP_HSMMC_WRITE(host->base, SYSCTL,
- OMAP_HSMMC_READ(host->base,
- SYSCTL) | SRD);
- while (OMAP_HSMMC_READ(host->base,
- SYSCTL) & SRD)
- ;
+ mmc_omap_reset_controller_fsm(host, SRD);
end_trans = 1;
}
}
@@ -456,13 +474,20 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
}
/*
- * Switch MMC operating voltage
+ * Switch MMC interface voltage ... only relevant for MMC1.
+ *
+ * MMC2 and MMC3 use fixed 1.8V levels, and maybe a transceiver.
+ * The MMC2 transceiver controls are used instead of DAT4..DAT7.
+ * Some chips, like eMMC ones, use internal transceivers.
*/
static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd)
{
u32 reg_val = 0;
int ret;
+ if (host->id != OMAP_MMC1_DEVID)
+ return 0;
+
/* Disable the clocks */
clk_disable(host->fclk);
clk_disable(host->iclk);
@@ -485,19 +510,26 @@ static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd)
OMAP_HSMMC_WRITE(host->base, HCTL,
OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR);
reg_val = OMAP_HSMMC_READ(host->base, HCTL);
+
/*
* If a MMC dual voltage card is detected, the set_ios fn calls
* this fn with VDD bit set for 1.8V. Upon card removal from the
* slot, omap_mmc_set_ios sets the VDD back to 3V on MMC_POWER_OFF.
*
- * Only MMC1 supports 3.0V. MMC2 will not function if SDVS30 is
- * set in HCTL.
+ * Cope with a bit of slop in the range ... per data sheets:
+ * - "1.8V" for vdds_mmc1/vdds_mmc1a can be up to 2.45V max,
+ * but recommended values are 1.71V to 1.89V
+ * - "3.0V" for vdds_mmc1/vdds_mmc1a can be up to 3.5V max,
+ * but recommended values are 2.7V to 3.3V
+ *
+ * Board setup code shouldn't permit anything very out-of-range.
+ * TWL4030-family VMMC1 and VSIM regulators are fine (avoiding the
+ * middle range) but VSIM can't power DAT4..DAT7 at more than 3V.
*/
- if (host->id == OMAP_MMC1_DEVID && (((1 << vdd) == MMC_VDD_32_33) ||
- ((1 << vdd) == MMC_VDD_33_34)))
- reg_val |= SDVS30;
- if ((1 << vdd) == MMC_VDD_165_195)
+ if ((1 << vdd) <= MMC_VDD_23_24)
reg_val |= SDVS18;
+ else
+ reg_val |= SDVS30;
OMAP_HSMMC_WRITE(host->base, HCTL, reg_val);
@@ -517,16 +549,15 @@ static void mmc_omap_detect(struct work_struct *work)
{
struct mmc_omap_host *host = container_of(work, struct mmc_omap_host,
mmc_carddetect_work);
+ struct omap_mmc_slot_data *slot = &mmc_slot(host);
+
+ host->carddetect = slot->card_detect(slot->card_detect_irq);
sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch");
if (host->carddetect) {
mmc_detect_change(host->mmc, (HZ * 200) / 1000);
} else {
- OMAP_HSMMC_WRITE(host->base, SYSCTL,
- OMAP_HSMMC_READ(host->base, SYSCTL) | SRD);
- while (OMAP_HSMMC_READ(host->base, SYSCTL) & SRD)
- ;
-
+ mmc_omap_reset_controller_fsm(host, SRD);
mmc_detect_change(host->mmc, (HZ * 50) / 1000);
}
}
@@ -538,7 +569,6 @@ static irqreturn_t omap_mmc_cd_handler(int irq, void *dev_id)
{
struct mmc_omap_host *host = (struct mmc_omap_host *)dev_id;
- host->carddetect = mmc_slot(host).card_detect(irq);
schedule_work(&host->mmc_carddetect_work);
return IRQ_HANDLED;
@@ -757,10 +787,14 @@ static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
case MMC_POWER_OFF:
mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
/*
- * Reset bus voltage to 3V if it got set to 1.8V earlier.
+ * Reset interface voltage to 3V if it's 1.8V now;
+ * only relevant on MMC-1, the others always use 1.8V.
+ *
* REVISIT: If we are able to detect cards after unplugging
* a 1.8V card, this code should not be needed.
*/
+ if (host->id != OMAP_MMC1_DEVID)
+ break;
if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
int vdd = fls(host->mmc->ocr_avail) - 1;
if (omap_mmc_switch_opcond(host, vdd) != 0)
@@ -784,7 +818,9 @@ static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
}
if (host->id == OMAP_MMC1_DEVID) {
- /* Only MMC1 can operate at 3V/1.8V */
+ /* Only MMC1 can interface at 3V without some flavor
+ * of external transceiver; but they all handle 1.8V.
+ */
if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) &&
(ios->vdd == DUAL_VOLT_OCR_BIT)) {
/*
@@ -1137,7 +1173,9 @@ static int omap_mmc_suspend(struct platform_device *pdev, pm_message_t state)
" level suspend\n");
}
- if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
+ if (host->id == OMAP_MMC1_DEVID
+ && !(OMAP_HSMMC_READ(host->base, HCTL)
+ & SDVSDET)) {
OMAP_HSMMC_WRITE(host->base, HCTL,
OMAP_HSMMC_READ(host->base, HCTL)
& SDVSCLR);
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 35a98eec741..2db166b7096 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -329,7 +329,7 @@ static void do_pio_write(struct s3cmci_host *host)
to_ptr = host->base + host->sdidata;
- while ((fifo = fifo_free(host))) {
+ while ((fifo = fifo_free(host)) > 3) {
if (!host->pio_bytes) {
res = get_data_buffer(host, &host->pio_bytes,
&host->pio_ptr);
@@ -793,8 +793,7 @@ static void s3cmci_dma_setup(struct s3cmci_host *host,
host->mem->start + host->sdidata);
if (!setup_ok) {
- s3c2410_dma_config(host->dma, 4,
- (S3C2410_DCON_HWTRIG | S3C2410_DCON_CH0_SDI));
+ s3c2410_dma_config(host->dma, 4, 0);
s3c2410_dma_set_buffdone_fn(host->dma,
s3cmci_dma_done_callback);
s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART);
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index f07255cb17e..406da9a8d45 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -107,6 +107,7 @@ static const struct sdhci_pci_fixes sdhci_ene_714 = {
static const struct sdhci_pci_fixes sdhci_cafe = {
.quirks = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER |
+ SDHCI_QUIRK_NO_BUSY_IRQ |
SDHCI_QUIRK_BROKEN_TIMEOUT_VAL,
};
@@ -144,8 +145,7 @@ static int jmicron_probe(struct sdhci_pci_chip *chip)
SDHCI_QUIRK_32BIT_DMA_SIZE |
SDHCI_QUIRK_32BIT_ADMA_SIZE |
SDHCI_QUIRK_RESET_AFTER_REQUEST |
- SDHCI_QUIRK_BROKEN_SMALL_PIO |
- SDHCI_QUIRK_FORCE_HIGHSPEED;
+ SDHCI_QUIRK_BROKEN_SMALL_PIO;
}
/*
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 6b2d1f99af6..accb592764e 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1291,8 +1291,11 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
if (host->cmd->data)
DBG("Cannot wait for busy signal when also "
"doing a data transfer");
- else
+ else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ))
return;
+
+ /* The controller does not support the end-of-busy IRQ,
+ * fall through and take the SDHCI_INT_RESPONSE */
}
if (intmask & SDHCI_INT_RESPONSE)
@@ -1636,8 +1639,7 @@ int sdhci_add_host(struct sdhci_host *host)
mmc->f_max = host->max_clk;
mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
- if ((caps & SDHCI_CAN_DO_HISPD) ||
- (host->quirks & SDHCI_QUIRK_FORCE_HIGHSPEED))
+ if (caps & SDHCI_CAN_DO_HISPD)
mmc->caps |= MMC_CAP_SD_HIGHSPEED;
mmc->ocr_avail = 0;
@@ -1723,7 +1725,9 @@ int sdhci_add_host(struct sdhci_host *host)
#endif
#ifdef SDHCI_USE_LEDS_CLASS
- host->led.name = mmc_hostname(mmc);
+ snprintf(host->led_name, sizeof(host->led_name),
+ "%s::", mmc_hostname(mmc));
+ host->led.name = host->led_name;
host->led.brightness = LED_OFF;
host->led.default_trigger = mmc_hostname(mmc);
host->led.brightness_set = sdhci_led_control;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 3efba236394..43c37c68d07 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -208,8 +208,8 @@ struct sdhci_host {
#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12)
/* Controller has an issue with buffer bits for small transfers */
#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13)
-/* Controller supports high speed but doesn't have the caps bit set */
-#define SDHCI_QUIRK_FORCE_HIGHSPEED (1<<14)
+/* Controller does not provide transfer-complete interrupt when not busy */
+#define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14)
int irq; /* Device IRQ */
void __iomem * ioaddr; /* Mapped address */
@@ -222,6 +222,7 @@ struct sdhci_host {
#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
struct led_classdev led; /* LED control */
+ char led_name[32];
#endif
spinlock_t lock; /* Mutex */
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-21 21:28:54 +0000