diff options
Diffstat (limited to 'drivers/mtd/devices/Kconfig')
| -rw-r--r-- | drivers/mtd/devices/Kconfig | 259 |
1 files changed, 259 insertions, 0 deletions
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig new file mode 100644 index 00000000000..c4a56a4ac5e --- /dev/null +++ b/drivers/mtd/devices/Kconfig @@ -0,0 +1,259 @@ +# drivers/mtd/maps/Kconfig +# $Id: Kconfig,v 1.15 2004/12/22 17:51:15 joern Exp $ + +menu "Self-contained MTD device drivers" + depends on MTD!=n + +config MTD_PMC551 + tristate "Ramix PMC551 PCI Mezzanine RAM card support" + depends on MTD && PCI + ---help--- + This provides a MTD device driver for the Ramix PMC551 RAM PCI card + from Ramix Inc. <http://www.ramix.com/products/memory/pmc551.html>. + These devices come in memory configurations from 32M - 1G. If you + have one, you probably want to enable this. + + If this driver is compiled as a module you get the ability to select + the size of the aperture window pointing into the devices memory. + What this means is that if you have a 1G card, normally the kernel + will use a 1G memory map as its view of the device. As a module, + you can select a 1M window into the memory and the driver will + "slide" the window around the PMC551's memory. This was + particularly useful on the 2.2 kernels on PPC architectures as there + was limited kernel space to deal with. + +config MTD_PMC551_BUGFIX + bool "PMC551 256M DRAM Bugfix" + depends on MTD_PMC551 + help + Some of Ramix's PMC551 boards with 256M configurations have invalid + column and row mux values. This option will fix them, but will + break other memory configurations. If unsure say N. + +config MTD_PMC551_DEBUG + bool "PMC551 Debugging" + depends on MTD_PMC551 + help + This option makes the PMC551 more verbose during its operation and + is only really useful if you are developing on this driver or + suspect a possible hardware or driver bug. If unsure say N. + +config MTD_MS02NV + tristate "DEC MS02-NV NVRAM module support" + depends on MTD && MACH_DECSTATION + help + This is an MTD driver for the DEC's MS02-NV (54-20948-01) battery + backed-up NVRAM module. The module was originally meant as an NFS + accelerator. Say Y here if you have a DECstation 5000/2x0 or a + DECsystem 5900 equipped with such a module. + +config MTD_SLRAM + tristate "Uncached system RAM" + depends on MTD + help + If your CPU cannot cache all of the physical memory in your machine, + you can still use it for storage or swap by using this driver to + present it to the system as a Memory Technology Device. + +config MTD_PHRAM + tristate "Physical system RAM" + depends on MTD + help + This is a re-implementation of the slram driver above. + + Use this driver to access physical memory that the kernel proper + doesn't have access to, memory beyond the mem=xxx limit, nvram, + memory on the video card, etc... + +config MTD_LART + tristate "28F160xx flash driver for LART" + depends on SA1100_LART && MTD + help + This enables the flash driver for LART. Please note that you do + not need any mapping/chip driver for LART. This one does it all + for you, so go disable all of those if you enabled some of them (: + +config MTD_MTDRAM + tristate "Test driver using RAM" + depends on MTD + help + This enables a test MTD device driver which uses vmalloc() to + provide storage. You probably want to say 'N' unless you're + testing stuff. + +config MTDRAM_TOTAL_SIZE + int "MTDRAM device size in KiB" + depends on MTD_MTDRAM + default "4096" + help + This allows you to configure the total size of the MTD device + emulated by the MTDRAM driver. If the MTDRAM driver is built + as a module, it is also possible to specify this as a parameter when + loading the module. + +config MTDRAM_ERASE_SIZE + int "MTDRAM erase block size in KiB" + depends on MTD_MTDRAM + default "128" + help + This allows you to configure the size of the erase blocks in the + device emulated by the MTDRAM driver. If the MTDRAM driver is built + as a module, it is also possible to specify this as a parameter when + loading the module. + +#If not a module (I don't want to test it as a module) +config MTDRAM_ABS_POS + hex "SRAM Hexadecimal Absolute position or 0" + depends on MTD_MTDRAM=y + default "0" + help + If you have system RAM accessible by the CPU but not used by Linux + in normal operation, you can give the physical address at which the + available RAM starts, and the MTDRAM driver will use it instead of + allocating space from Linux's available memory. Otherwise, leave + this set to zero. Most people will want to leave this as zero. + +config MTD_BLKMTD + tristate "MTD emulation using block device" + depends on MTD + help + This driver allows a block device to appear as an MTD. It would + generally be used in the following cases: + + Using Compact Flash as an MTD, these usually present themselves to + the system as an ATA drive. + Testing MTD users (eg JFFS2) on large media and media that might + be removed during a write (using the floppy drive). + +config MTD_BLOCK2MTD + tristate "MTD using block device (rewrite)" + depends on MTD && EXPERIMENTAL + help + This driver is basically the same at MTD_BLKMTD above, but + experienced some interface changes plus serious speedups. In + the long term, it should replace MTD_BLKMTD. Right now, you + shouldn't entrust important data to it yet. + +comment "Disk-On-Chip Device Drivers" + +config MTD_DOC2000 + tristate "M-Systems Disk-On-Chip 2000 and Millennium (DEPRECATED)" + depends on MTD + select MTD_DOCPROBE + select MTD_NAND_IDS + ---help--- + This provides an MTD device driver for the M-Systems DiskOnChip + 2000 and Millennium devices. Originally designed for the DiskOnChip + 2000, it also now includes support for the DiskOnChip Millennium. + If you have problems with this driver and the DiskOnChip Millennium, + you may wish to try the alternative Millennium driver below. To use + the alternative driver, you will need to undefine DOC_SINGLE_DRIVER + in the <file:drivers/mtd/devices/docprobe.c> source code. + + If you use this device, you probably also want to enable the NFTL + 'NAND Flash Translation Layer' option below, which is used to + emulate a block device by using a kind of file system on the flash + chips. + + NOTE: This driver is deprecated and will probably be removed soon. + Please try the new DiskOnChip driver under "NAND Flash Device + Drivers". + +config MTD_DOC2001 + tristate "M-Systems Disk-On-Chip Millennium-only alternative driver (DEPRECATED)" + depends on MTD + select MTD_DOCPROBE + select MTD_NAND_IDS + ---help--- + This provides an alternative MTD device driver for the M-Systems + DiskOnChip Millennium devices. Use this if you have problems with + the combined DiskOnChip 2000 and Millennium driver above. To get + the DiskOnChip probe code to load and use this driver instead of + the other one, you will need to undefine DOC_SINGLE_DRIVER near + the beginning of <file:drivers/mtd/devices/docprobe.c>. + + If you use this device, you probably also want to enable the NFTL + 'NAND Flash Translation Layer' option below, which is used to + emulate a block device by using a kind of file system on the flash + chips. + + NOTE: This driver is deprecated and will probably be removed soon. + Please try the new DiskOnChip driver under "NAND Flash Device + Drivers". + +config MTD_DOC2001PLUS + tristate "M-Systems Disk-On-Chip Millennium Plus" + depends on MTD + select MTD_DOCPROBE + select MTD_NAND_IDS + ---help--- + This provides an MTD device driver for the M-Systems DiskOnChip + Millennium Plus devices. + + If you use this device, you probably also want to enable the INFTL + 'Inverse NAND Flash Translation Layer' option below, which is used + to emulate a block device by using a kind of file system on the + flash chips. + + NOTE: This driver will soon be replaced by the new DiskOnChip driver + under "NAND Flash Device Drivers" (currently that driver does not + support all Millennium Plus devices). + +config MTD_DOCPROBE + tristate + select MTD_DOCECC + +config MTD_DOCECC + tristate + +config MTD_DOCPROBE_ADVANCED + bool "Advanced detection options for DiskOnChip" + depends on MTD_DOCPROBE + help + This option allows you to specify nonstandard address at which to + probe for a DiskOnChip, or to change the detection options. You + are unlikely to need any of this unless you are using LinuxBIOS. + Say 'N'. + +config MTD_DOCPROBE_ADDRESS + hex "Physical address of DiskOnChip" if MTD_DOCPROBE_ADVANCED + depends on MTD_DOCPROBE + default "0x0000" if MTD_DOCPROBE_ADVANCED + default "0" if !MTD_DOCPROBE_ADVANCED + ---help--- + By default, the probe for DiskOnChip devices will look for a + DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000. + This option allows you to specify a single address at which to probe + for the device, which is useful if you have other devices in that + range which get upset when they are probed. + + (Note that on PowerPC, the normal probe will only check at + 0xE4000000.) + + Normally, you should leave this set to zero, to allow the probe at + the normal addresses. + +config MTD_DOCPROBE_HIGH + bool "Probe high addresses" + depends on MTD_DOCPROBE_ADVANCED + help + By default, the probe for DiskOnChip devices will look for a + DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000. + This option changes to make it probe between 0xFFFC8000 and + 0xFFFEE000. Unless you are using LinuxBIOS, this is unlikely to be + useful to you. Say 'N'. + +config MTD_DOCPROBE_55AA + bool "Probe for 0x55 0xAA BIOS Extension Signature" + depends on MTD_DOCPROBE_ADVANCED + help + Check for the 0x55 0xAA signature of a DiskOnChip, and do not + continue with probing if it is absent. The signature will always be + present for a DiskOnChip 2000 or a normal DiskOnChip Millennium. + Only if you have overwritten the first block of a DiskOnChip + Millennium will it be absent. Enable this option if you are using + LinuxBIOS or if you need to recover a DiskOnChip Millennium on which + you have managed to wipe the first block. + +endmenu + |